GMS SERIES
Tool Spindle Type 5-axis Turning Centers
The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide flexible and efficient machining ability.
BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY
1
2
Flexible Machining Combinations
With 40 years of knowledge and experience in the machine tools field, GOODWAY
is proud to present the new GMS series 5-axis turning center. This hybrid has the
combination of GOODWAY's exquisite techniques ( X, Y, Z, C axes and live tooling
turret ) and the features of a machining center, such as the high-speed spindle, ATC
system, and B-axis. Complex free shape machining 5 degree segmentation, tapping,
milling, drilling, incline machining, contour machining, and turning can be done
easily, hence, done in one is made possible.
TOOL SPINDLE TYPE 5-AXIS TURNING CENTERS
1
TOOLING SPINDLE
Tooling spindle uses triple plate curvic coupling with
worm gear drive structure.• Swiveling range : ±120°
• Indexing resolution : 5° ( Discontinuous )
1
The GMS series combine turning centers and machining centers' strong features into one single
machine, saving floor space and equipment purchase cost while increasing machining accuracy.
9 axes control with 5 axes simultaneous turning, any difficult cutting tasks can be overcomed easily.
Tooling spindle and turret support 1st spindle and 2nd spindle, which provides high efficiency.
2 3
3
4
TOOL SPINDLE TYPE 5-AXIS TURNING CENTERS
BUILT-IN LIVE TOOLING TURRET
Ø 250 mm curvic coupling equipped with spindle motor driven turret
provides the best cutting ability.• Tool shank size : □ 25 mm / Ø 40 mm• Live tooling shank size : ER32• Stations : 15
3D SIMULATION
The 3D simulation program provides real time environment simulation
which maintains operation safety while saving run-in testing costs.
( GMS-2600ST model shown. )
2
3
Z1-axis
Y1-axis
X1-axis
X2-axis
Z2-axis
C2-axis
C1-axis
B-axis
Tooling spindle
Live tooling turret
Arm type ATC
1st spindle
ADVANCED STRUCTURE DESIGN
( Casting structure of GMS-2600ST modle shown. )
5
6
Zs-axis
2nd spindle
HIGH PRECISION BUILT-IN SPINDLE
1st spindle and 2nd spindle are designed by the same specification and driven by built-in spindle motor to
ensure the accuracy of long processing time and increase the using time of spindle.
ADVANCED SLIDE WAY DESIGN
The X / Y / Z1 axes are adopted with high-rigidity, extra-wide box way design to provide solid foundation
for heavy-duty cutting.
The Z2 / Zs axes are adopted with high-speed, high-precision roller linear guideways design to increase
work-piece overall accuracy and maintain excellent cutting rigidity.
1
3
2
4
5
Y-axis saddle and bed are 90° orthogonal design
which makes the center of gravity keep on the
bed to ensure the cutting rigidity.
The bed height is lower than 30° or 45° slant beds
which reduces the center of gravity of the machine.
The machining area is designed with a 60° slant
bed for easy chip disposal and heat elimination.
3
4
5
1 2
ULTIMATE TURNING POWER
1st & 2nd Spindle Output
0250
4
500 750 1,300 rpm1,000
8
12
16
20
50
100
150
200
250
157172
223
[ N-m ]Torque
[ kW ]Output
640 665 830
Torque S3 ( 40% )
Torque S2 ( 30min. )Torque S1 ( cont. )
11 kW S1( cont. )
15 kW S2 ( 30 min. )
15 kW S3 ( 40% )
0250
4
500 750 1,300 rpm1,000
8
12
16
20
50
100
150
200
250
157172
223
640 665 830
Torque S3 ( 40% )
Torque S2 ( 30min. )Torque S1 ( cont. )
11 kW S1 ( cont. )
15 kW S2 ( 30 min. )
15 kW S3 (40% )
0 4,800 rpm
[ N-m ]Torque
[ kW ]Output
GMS-2000
High Speed
1,200 2,400 3,600
5
10
15
20
25
30
30
60
90
120
150
180
0 4,000 rpm
GMS-2600
High Speed
GMS-2000
Low Speed
GMS-2600
Low Speed
1,000
5
10
15
20
25
30
30
60
90
180
15.518.7
7080
1,6002,000 3,000
1,600
131149
120
150
131149
7080
Torque S2 ( 30 min. )
Torque S1 ( cont.)
25 kW S2 ( 30 min. )
22 kW S1 ( cont.)
25 kW S2 ( 30 min. )
22 kW S1( cont. )21.5
18.5
Torque S2 ( 30 min. )
Torque S1 ( cont.)
[ N-m ]Torque
[ kW ]Output
[ N-m ]Torque
[ kW ]Output
The 1st and 2nd spindle module are equipped with cylindrical roller
bearings which are better than angular contact bearings. The spindle is
installed with a built-in spindle motor which eliminates power loss and
belt slipping problems. The C-axis with high resolution magnetic encoder
provides high precision contour machining capability.
7
8
TOOLING SPINDLE & ATCs
Live Tooling drive motor output
Tooling Spindle Output
0
[ N-m ]Torque
[ kW ]Output
Constant Torque Constant Output
01,500 3,000 4,500 6,000 rpm
4
6
8
1,400
2.2 kW ( cont. )
3.7 kW ( cont. )
5.5 kW ( S3 60% )
10
20
30
40
23.6
35
2
37.5
0
10
20
30
40
50
5
10
15
20
2522 kW ( 25% )
18.5 kW ( 10 min. )
15 kW (30 min. )
11 kW ( cont. )
3,000 6,000 9,000
17
23
35
29
Torque S3 ( 25% )
Torque S2 ( 10 min. )
Torque S2 ( 30 min. )
Torque S1 ( cont. )
12,000 rpm
[ N-m ]Torque
[ kW ]Output
Tooling spindle provides 2 types of spindle taper,
KM-63 and HSK-A63, which max. speed is 10,000
r pm, min. index 0 .001° to fu l f i l l prec ise and
complex contour machining needs.
All series are standard with high efficiency 24T
( 40T Opt. ) arm type ATC system which can easily
fulfill various types of processing needs.
T-T:1.5 sec.
NC INTELLIGENCE
Significant Production Efficiency
software, makes your machine smarterAdvanced hardware combined with intelligent
Advanced Hardware
Outstanding Operability
Streamlined Programming
High Security and Shortened Machining Setting
Reliable Continuous Operation
Shortened Troubleshooting Time
Improved Utilization Rate
General ProductionProcess
Setting
Setting
Test-Run
Test-Run
Actual Production
Actual Production Utilization Rate 30%Using 3D SimulationInspection
The 3D simulation inspection can greatly reduce test-run timeand improve overall utilization rate
Programming Setting Test-Run Actual Production Daily Used
Comprehensive Functions
3D advance tool path and cutting simulation
Tool load monitor
3D Real-time cutting simulation and interference check
Tool load monitor
Program check
Smart balance detection
3D Real-time cutting simulation and interference check
Safety signal viewer
Fast alarm check productivity
Productivity management
Twin operation system switch
Maintenance management
Program management
Friendly programing environment
Programming auxiliary
Manual Guide i
Embedded E-manual
230 70 40
170 30
200
510
407
Ø 238
138
54
8" Chuck
Ø210
10" Chuck
Ø 254
Ø 3
40
Max
. Tur
ning
Dia
.
18020
100
105
60
175
25
O.D. Tool Holder
O.D. Tools
O.D. Tools
O.D. Tools
I.D. Tools
Sleeve
Sleeve
Sleeve
I.D. Tools
Cut o�-Tool Holder
I.D. Tool Holder
Face Tool Holder
Drill
ER Collet Tool Holder
O.D. Tool Holder( Square Shank )
Face Tool Holder( Square Shank )
End Mill Tool Holder
Boring Bar Tool Holder
LN-3191
CV-3097
LN-3198
LN-3195
LN-3196
LN-3197
CJ-3014ACJ-3014BCJ-3014C
CJ-3010CJ-3011
CJ-3016ACJ-3016B
CV-3203DCV-3203C
CV-3203BCV-3203A
CV-3093A
CV-3045CV-3046
□ 25 mm□ 25 mm
□ 25 mm
Only for GMS-2000ST*1
*1
□ 25 mm
□ 25 mm
□ 25 mm
□ 25 mm
( MT#2 )( MT#3 )
O.D. Tool Holder
Double O.D. Tool Holder
DIMENSIONS
Tooling System
Interference Diagram
Unit : mm 9
10
DIMENSIONS
Work Range
Unit : mm
Z1 Zero Position : 550ATC Position : 550
ATC
Posi
tion
: 575
Z1 Zero Position : 550
168 3021,090 10
ZS-axis Travel : 1,100
580
280
60
300
5
X1-a
xis T
rave
l : 6
00
Max
Tur
ning
Dia
. : Ø
560
550
318
275
5
40
Z1-axis Travel : 1,100
280
550
168 3021,090
ZS-axis Travel : 1,10010
Z1-axis Travel : 1,100
8080
5475120X1-axis Travel : 600
8080
Y-ax
is T
rave
l : 1
60
Y-ax
is T
rave
l : 1
60
200
235
140
400
X1-a
xis T
rave
l : 6
00
80 80
5
Y-axis Travel : 160
20
13
530
32024
043
823
103 30113 47
103 30
113 47
103 30
113 47
Ø610
Ø25410" Chuck
Ø25410" Chuck
10" Chuck8" Chuck
10" Chuck8" Chuck
10" Chuck
10" Chuck
8" Chuck
10" Chuck
10" Chuck
8" Chuck
8" Chuck
Unit : mm
Unit : mm
Unit : mm
10" Chuck8" Chuck
10" Chuck8" Chuck
Z2 Zero Position : 480166
1517
0X2
-axi
s Tra
vel :
185
480Z2-axis Travel : 960
ZS-axis Travel : 1,100101,090
Z2 Zero Position : 480166
480Z2-axis Travel : 960
ZS-axis Travel : 1,100101,090
1017
5X2
-axi
s Tra
vel :
185
105
1916
6X2
-axi
s Tra
vel :
185
518
0X2
-axi
s Tra
vel :
185
100
168
168
510
510
120 22MAX.
103 30113 47
103 30113 47
10" Chuck8" Chuck
10" Chuck8" Chuck
10" Chuck8" Chuck
10" Chuck8" Chuck
Work Range
Machine Layout
11
12
GMS-2000 :4,450 GMS-2000 :715395
855
GMS-2000L:5,810 GMS-2000L:730 GMS-2000 series :2,590
310
2,35
01,
240
710
2,73
0
770
3,25
0
24-T
ool M
agaz
ine:
2,76
0
40-T
ool M
agaz
ine:
3,01
0
GMS-2000L series:2,630
CAPACITY GMS-2000ST GMS-2600ST
Max. swing diameter Ø 900 mm
Swing over saddle Ø 700 mm
Distance between spindle nose 1,402 / 1,902*1 mm
Max. turning diameter Tooling spindle : Ø 560 mm Turret : Ø 340 mm
Max. turning length 1,100 / 1,600*1 mm 1,094 / 1,594*1 mm
SPINDLE
Bar capacity Ø 51 mm Ø 65 mm
Hole through spindle Ø 61 mm Ø 76 mm
Spindle bearing diameter ( Front / Rear ) Ø 100 / 80 mm Ø 120 / 100 mm
Chuck size 8" 10"
Spindle nose A2-6
Spindle motor type Bi I 170S / 6000
Spindle motor output ( cont. / 30 min. ) H : 22 / 25 kW , L : 11 / 15 kW
Gear ratio 1:1
Spindle speed range 4,800 rpm 4,000 rpm
Max. spindle torque ( cont. / 30 min. ) H : 131 / 149 N-m , L : 157 / 223 N-m
X / Y / Z AXES
X1 / X2 axes travel 600 / 185 mm
Z1 / Z2 axes travel 1,100 / 960 mm ( 1,600 / - mm )*1
Zs-axis / Tailstock travel 1,100 / 1,090 mm ( 1,300 / 1,290 mm )*1*2
Y-axis travel ± 80 mm
X1 / Z1 / Z2 / Zs axes rapids 24 m/min.
Y-axis rapids 16 m/min.
Slide way type Box way ( Linear way : Z2 / Zs axes )
X1 / Z1 / Y axes servo motor AC 4.5 kW
X2 / Z2 / Zs axes servo motor AC 3.0 kW
X1 / X2 / Y axes ball screw Ø / pitch Ø 36 mm / 10 mm
Z1 / Z2 / Zs axes ball screw Ø / pitch Ø 45 mm / 10 mm
X1 / Z1 axes thrust 1,409 kgf
Y-axis thrust 2,114 kgf
X2 / Z2 / Zs axes thrust 1,153 / 769 / 769 kgf
MACHINE SPECIFICATIONS
*1 L model*2 Steady rest required.*3 Not available for L model.
TOOLING SPINDLE GMS-2000ST GMS-2600ST
B-axis travel ± 120 º
B-axis rapids 30 rpm
B-axis servo motor AC 2.7 kW
Min. indexing of B-axis 0.001º
Max. spindle speed 10,000 rpm ( Opt. 12,000 rpm )
Spindle taper KM63 / HSK-T63
Spindle motor output ( cont. / 30 min. / 10 min. / 25 % )
11 / 15 / 18.5 / 22 kW
Magazine capacity 24 T ( Opt. 40 T )
Max. tool diameter / adj. empty Ø 100 / Ø 150 mm
Max. tool length / weight 300 mm / 7 Kg
TURRET*3
Stations 15
OD / ID tool shank size □ 25 mm / Ø 40 mm
Index speed ( adj. ) 0.3 sec.
Live tooling stations 15
Live tooing shank size ER 32
Max. tooling speed 6,000 rpm
TAILSTOCK
Quill diameter Ø 110 mm
Quill type MT#4 ( Dead center ) ; MT#5 ( Live center )
GENERAL
Hydraulic / Lubrication capacity 50 L / 3 L
Coolant tank capacity 305 L
CNC Controller4+1 axes FANUC 31i -B
5-axis FANUC 31i -B5
Machine weight 13,000 / 15,000*1 Kg
Dimensions ( L × W × H ) 4,450 x 2,900 × 3,300 / 5,810 x 2,940 x 3,300*1 mm
Specications are subject to change without notice.
13
14
Copyright 2015 by Goodway Machine Corp. All right reservedG-GMS-EN-201502
GOODWAY MACHINE CORP.
GOODWAY MACHINE ( WUJIANG ) CO.,LTDHEADQUARTERS CENTRAL TAIWAN SCIENCE PARK BRANCH
No.13, 5Th Road,
Taichung Industrial Park,
Taichung City, 407, Taiwan, R.O.C.
E-mail : [email protected]
No. 38, Keyuan Road,
Central Taiwan Science Park.Taichung,
Taichung City, 407, Taiwan, R.O.C.
TEL : + 886-4-2463-6000
FAX : + 886-4-2463-9600
No. 4888, East Lake Taihu Avenue, Wujiang
Economic and Technological Development Zone,
Jiangsu, China
TEL : +86-512-8286-8068
FAX : +86-512-8286-8620
E-mail : [email protected]
GOODWAYCNC.com