Fluid Mechanics I 1. Introduction & Chapter 1 3rd semester, autumn
Shinichiro YANO Department of Urban and Environmental Engineering, Kyushu University
10 October, 2012
2 2
Who am I ? Instructor: Shinichiro Yano, Dr. of Engineering
– Associate Professor of Sustainable Aquatic Environmental Engneering
– Environmental Fluid Mechanics Lab. – Room 1031, West 2 building (West zone) – tel: 092-802-3414 – [email protected]
WEB site for this class http://www7.civil.kyushu-u.ac.jp/kankyo/kankyo_en/
lecture_en.html
ー PDF file for color version can be downloaded
Career: 1995-1998: Research Associate, KU 1998: Degree of Dr., Engineering, KU 1998-2002: Lecturer, Nagasaki Univ. 2002-2004: Research Fellow, KU 2004-now: Associate Professor, KU 2008-2009: Guest Researcher, TU Delft, the Netherlands
3
4 4
Research Interests: 1) Environmental Hydraulics: - mechanism of change of aquatic environment - improvement of deteriorated coastal and riverine environments 2) Computational Fluid Dynamics(CFD): - numerical simulation of current and matter transport in an estuary
and a river 3) Hydroinformatics: - to combine GIS(geographical information system) with CFD and Field
Measurement
the upper Chikugo River: Q=4.5m3/s
Effect of stream flow regime change on river ecosystem
the upper Chikugo River: Q=40m3/s
In-situ measurement of tidal current in Ariake Sea: flood tide
上げ潮最強時(09:00~11:00)の水深平均流速平面分布
10km10km10km10km
下げ潮最強時(15:00~17:00)の水深平均流速平面分布
10km10km10km10km
In-situ measurement of tidal current in Ariake Sea: ebb tide
0 6 12 18 24
Numerical hydrodynamics modeling in Ariake Sea: Salinity distribution in flood event in 2006
05:00 HW 12:00 LW 19:00 HW
Komenotu River
Minamata Rive
Minamata Bay Minamata Bay
11 11
Course descriptions (1) Textbook
– Fluid mechanics, 7th edition – By Frank White – International edition (PB) – McGraw-Hill – ISBN:978-0071311212 – used for series of courses, Fluid Mechanics II (Mech. and Aero.),
Hydraulics I and II (Civil)
Prerequisites – Mathematical skills
• Ordinary & partial differential & integral calculations • Linear algebra • Vector analysis
12 12
Course descriptions (2) Attendance
– Attendance of 2/3 of classes (more than 10 classes) is required – Attendance is confirmed via a small exercise to check
understanding level: This is NOT a test!
Grading – Mid-term and final examinations 80% – Attendance 20% – Total score of 60 is necessary for qualification
14 14
1. Introduction 1.1 What is fluid ? What is fluid ? (§1.4)
– Solid can resist shear – Liquid
• Water, oil, alcohol, etc. • Large density with cohesive forces
– Gas • Air, nitrogen, natural gas, etc. • Free movement of molecules
Fluids easily moved by shear (No shear forces at rest)
Temperature
Pres
sure
Solid
Liquid
Gas
Saturation curve
Fig. 1.3
boiling point
melting point
15 15
1. 2 Fluid mechanics as a continuum mechanics Fluid as a continuum (§1.5)
– Density
• Mass per unit volume • δv*~10-9 mm3 (1µm3) at standard condition
– Knudsen number
• Mean free path of gas molecules / representative physical length • Kn <<0.01 Continuum mechanics Fluid dynamics (fluids in motion) Fluid statics (fluid at rest) • Kn >>0.01 Rarefied gas dynamics
Fig. 1.4
vM
vv δρ
δδ ∗→= lim
LKn λ
=
16 16
1. 3 Dimensions & Units (§1.6) Dimensions
– 4 primary dimensions Mass, Length, Time, Temperature {Θ} • Other dimensions can be represented by those four in FM
» ex. Velocity {V}={L/T}, Force {F} ={MLT-2}
Units for quantitative expressions – SI (International system) units
• Kg (Kilo-gram), m (meter), s (second), K (Kelvin) – Other… BG, CGS, EES --- can be converted to SI
Homogeneous dimensions (units) must be used
Table 1.1 Primary dims. Table 1.2 Secondary dims.