Single Mode Splitter Chips
Specifications
♣ Specifications are subject to change without notice.
Fi-ra Photonics Co., Ltd.
Sing
le M
ode
Split
ter C
hips
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
Ordering InformationFOSC – XXX – X
Ports (In/Out)104 : 1×4108 : 1×8116 : 1×16132 : 1×32
End FaceN : None PolishedF : 0˚ PolishedT : 8˚ Top Short PolishedB : 8˚ Bottom Short Polished
♣ 2×N : Preliminary
Single Mode 1×N Splitter Chips divide uniformly optical signals from input ports to multiple outputs. Splitter chips can also be operated in the reverse direction to combine multiple wavelengths into one fiber.
Features• Single mode• Up to 32 outputs standard• Available in 1×N configurations
< 1x8 Splitter Chips >
♣ Quartz full lid :1.0t Optional)
≤ 0.3
16.713.710.26.9dBInsertion Loss (Typ.)
17.2 x 5.5 x 2.5
1.7
17.5
1×32
127250㎛Fiber Spacing
≤ 0.15 ≤ 0.25
≥ 55
≥ 55
≤ 0.1
13.8×3.0×2.5
0.8
10.7
1×8
14.27.3
- 40 to + 85℃Operating Temp. Range
QuartzSubstrate0 ± 0.3, 8 ± 0.3 (Top or Bottom Short)˚End Face
Quartz Full LidLid
15.5×3.5×2.510.5×2.5×2.5㎜Chip Dimension (L×W×H)
dBDirectivitydBReturn Loss *
dBPDL1.50.6dBUniformity
dBInsertion Loss (Max.)
1.26 ~ 1.64㎛Operating Wavelength
1×161×4UNITP A R A M E T E R
♣ * : Applied to 8˚ Polished Chips
8° Top Short Polished 8° Bottom Short Polished
Substrate (Quartz)
Lid (Quartz)
Substrate (Quartz)
Lid (Quartz)2.5mm
1.5mm
1.0mm
Single Mode Splitters
Fi-ra Photonics Co., Ltd.
Sing
le M
ode
Split
ters
Single Mode 1×N Splitters divide uniformly optical signals from input ports to multiple outputs.
Splitters can also be operated in the reverse direction to combine multiple wavelengths into one
fiber.
Features• Single mode• Up to 32 outputs standard• Available in 1×N configurations
Applications• Fiber optic equipments & systems
• CATV networks
• Data communications
• Passive optical networks (ATM, WDM, Ethernet)< 1×8 Splitter with SC Connectors >
Specifications
♣ Specifications are subject to change without notice.
16.813.810.37.0dBInsertion Loss (Typ.)
50 x 7 x 4
2.0
18.0
1×32
45 × 5 × 4
≤ 0.15 ≤ 0.3
45 × 5 × 4
≥ 55
≥ 55
≤ 0.1
1.0
11.0
1×8
14.57.5
- 40 to + 85℃Operating Temp. Range
40 × 4 × 4㎜Package Dimension
(L×W×H)
dBDirectivity
dBReturn Loss
dBPDL
1.70.8dBUniformity
dBInsertion Loss (Max.)
1.26 ~ 1.64㎛Operating Wavelength
1×161×4UNITP A R A M E T E R
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
♣ 2×N : Preliminary
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
FOS – XXX – XX – XX – X
Pigtail TypeInput / Output 1 : 250㎛2 : 900㎛3 : 8-Fiber Ribbon
Pigtail Length (L)05 : 0.5m10 : 1.0m15 : 1.5m20 : 2.0m…
Connector Type0 : None1 : FC / UPC2 : SC / UPC3 : LC / UPC4 : MU5 : FC / APC6 : SC / APC
Ports (In/Out)104 : 1×4108 : 1×8116 : 1×16132 : 1×32
Add for Fanout : – XXXX
Length(Ribbon (L1) / Breakout (L2))
0505 : 0.5m / 0.5m1010 : 1.0m / 1.0m …
Input
Pigtail Length (L)XX
OutputPigtail Length (L)
XX
Ribbon Part (L1)
XX
Breakout Part (L2)
XX
Ordering Information
Package Dimension (For 1x16 Splitter Module)
InputFiber Type : SMF-28, 900㎛ Buffered FiberFiber Length : 1mWithout Connector
OutputFiber Type : SMF-28, 2ea of 8-Fiber Ribbon
Fiber Length : 1mWithout Fanout and Connectors
View # 1
View # 2
View # 1
View # 2
H : 4mm
2.5mm L : 45mm 2.5mm
W : 5mm
2.5mm L : 45mm 2.5mm
Core Technology• Photolithography defines the desired array• Chemical etching
Fi-ra Photonics Co., Ltd.
V-G
roov
e C
hips
Features• Accurate V-Groove pitch positions• Environmentally stable• Tolerances do not accumulate,
even over multi channels
V-Groove Chips
Applications• Fiber Array
Schematics
127㎛ Silicon V-Groove Chip
250㎛ Silicon V-Groove Chip
Spacing ForFiber to Fiber
Spacing ForRibbon to Ribbon
Spacing ForFiber to Fiber
70.5°
70.5°
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
PreliminaryPreliminary
♣ Specifications are subject to change without notice.
Specifications
3.5
10 ± 0.3
- 40 to + 85℃Operating Temp. RangeSiliconMaterial
70.5°Angle of V-Groove
l ∆x, ∆y l < 0.3㎛Position Uniformity
of Fiber Core
4
4VGUNIT
9.75.72.5㎜Width of Chip
(Tolerance : ± 0.1)
8 ± 0.3㎜Length of Chip1,000 ± 25㎛Thickness of Chip
500, 250-㎛Spacing for Ribbon to Ribbon
250-㎛Spacing for Fiber to Fiber3216821Number of Ch.
32VG16VG8VG2VG1VGP A R A M E T E R
Ordering Information
FVG – XX - XXXX
Channel No.01 : 1Ch.02 : 2Ch.08 : 8Ch.16 : 16Ch.…
Spacing (for Fiber / Ribbon)2500 : 250 / None (Only to 1, 2, 4 & 8VGs)2525 : 250 / 2502550 : 250 / 5001212 : 127 / 1270000 : Special Type
SiliconMaterial- 40 to + 85Operating Temp. Range
5.53.5
70.5°Angle of V-Groove
l ∆x, ∆y l < 0.3㎛Position Uniformity
of Fiber Core
-22.5㎛Position of Fiber Core
From Top of Chip
3232VGUNIT
6.52.5㎜Width of Chip
(Tolerance : ± 0.1)
10 ± 0.3㎜Length of Chip1,000 ± 25㎛Thickness of Chip
127㎛Spacing for Fiber to Fiber40168Number of Ch.
40VG16VG8VGP A R A M E T E R
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
♣ Each v-groove chip is offered with lid glass.
Fi-ra Photonics Co., Ltd.
Fibe
r Arr
ay
Core Technology• Photolithography defines the desired array
• Chemical etching
• High quality flat-angle polishing
Silicon Fiber Arrays
Features• Accurate fiber pitch positions
• Environmentally stable
• Tolerance do not accumulate, even over multi channels
• Low insertion loss
Applications• OXC, OADM & MEMS products
• PLC devices packaging
(Splitters, AWGs, Multi-channel VOAs, Multi-channel T/O Switches)
Schematics
250㎛ Fiber Array
127㎛ Fiber Array
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
Spacing ofFiber to Fiber
Spacing ofRibbon to Ribbon
25㎛Height ofFiber Array
Pyrex Lid Glass
Silicon V-Groove Chip
Spacing ofFiber to FiberSilicon V-Groove Chip
Pyrex Lid Glass
32.5㎛Height of
Fiber Array
PreliminaryPreliminary
♣ Specifications are subject to change without notice.♣ Thickness of lid : 1,500㎛ (Optional)
Specifications
44 FA
3.5
10 ± 0.3
UNIT
500 , 250250
- 40 to + 85℃Operating Temp. RangeSMF-28Fiber Type
9.75.72.5㎜Width of Array Block(Tolerance : ± 0.1)
2 ± 0.1㎜Height of Array Block8 ± 0.3㎜Length of Array Block
0 ± 0.3, 8 ± 0.3 (Top or Bottom Short)˚Polishing Angle
l ∆x, ∆y l < 0.5㎛Position Uniformity
Of Fiber Core
Silicon / PyrexMaterials (V-Groove Chip / Lid)1,000 ± 25㎛Thickness of Lid1,000 ± 25㎛Thickness of V-Groove Chip
-㎛Spacing of Ribbon to Ribbon-㎛Spacing of Fiber to Fiber
3216821Number of Fibers32 FA16 FA8 FA2 FA1 FAP A R A M E T E R
Ordering InformationFFA – XX – XXXX – X X – XX X
End FaceN : None Polished
F : 0˚ PolishedT : 8˚ Top ShortB : 8˚ Bottom Short
FiberLength
05 : 0.5m10 : 1.0m15 : 1.5m20 : 2.0m…
Connector Type 0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Fiber No.01 : 1FA02 : 2FA04 : 4FA08 : 8FA16 : 16FA…
SpacingFiber / Ribbon2500 : 250 / None2525 : 250 / 2502550 : 250 / 5001212 : 127 / 1270000 : Special Type
Fiber Type1 : 250㎛
4 : 4-Fiber Ribbon8 : 8-Fiber Ribbon9 : 900㎛
5.53.5
UNIT
127
- 40 to + 85℃Operating Temp. RangeSMF-28Fiber Type
6.52.5㎜Width of Array Block(Tolerance : ± 0.1)
2 ± 0.1㎜Height of Array Block10 ± 0.3㎜Length of Array Block
0 ± 0.3, 8 ± 0.3 (Top or Bottom Short)˚Polishing Angle
l ∆x, ∆y l < 0.5㎛Position Uniformity
Of Fiber Core
Silicon / PyrexMaterials (V-Groove Chip / Lid)1,000 ± 25㎛Thickness of Lid1,000 ± 25㎛Thickness of V-Groove Chip
-㎛Spacing of Fiber to Fiber4032168Number of Fibers
40 FA32 FA16 FA8 FAP A R A M E T E R
Add for Fanout : – XXXX
Length(Ribbon (L1) / Breakout (L2))
05 : 0.5m / 0.5m10 : 1.0m / 1.0m …
Pigtail Length (L)XX
Ribbon Part (L1)
XX
Breakout Part (L2)
XX
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
Specifications
Stan
dard
Sin
gle
Win
dow
Fibe
r Cou
pler
Standard Single WindowFiber Coupler
3.4 (Max.)dBInsertion Loss *
3.0(φ) × 54(L),85(L) ×17(W) ×7(H)
㎜Package Dimension
- 40 to + 85℃Operating Temp. Range≥ 50dBDirectivity≤ 0.1dBPDL≤ 0.6dBUniformity≤ 0.07dBExcess Loss *
± 15㎚Wavelength Bandwidth1310 or 1550㎚Operating Wavelength
For 50 : 50 Coupling RatioUNITP A R A M E T E R
Standard Single Window Fiber Coupler is used to
passively split or combine light between two fibers.
The device is fabricated using fused biconic tapering
technique. The coupling ratio is designed according
to customer requirements. Various types of
connectors are available.
♣ Specifications subject to change without notice.* : Without Connectors
Features• Low insertion loss & PDL• Excellent performance • High stability and reliability
Applications• Telecommunications• CATV & access networks• Test equipments
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
Ordering InformationFSC – XXXX – XX – XX – XX
Coupling Ratio5050 : 50 / 504060 : 40 / 603070 : 30 / 702080 : 20 / 801090 : 10 / 900595 : 05 / 950199 : 01 / 99
GradeP : Premium
Wavelength
1 : 13102 : 1550
Port1 : 1 × 22 : 2 × 2
Package
1 : SUS Tube Package& 250㎛ Coated Fiber
2 : SUS Tube Package& 900㎛ Loosed Tube Fiber
3 : Al-case package& 900㎛ Loosed Tube Fiber
4 : Al-case Package& 2.4mm Jacketed Fiber
Fiber Length1 : 1m2 : 2m …
Connector Type
0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Fi-ra Photonics Co., Ltd.
Specifications (Based on Equal Splitting)
♣ Specifications subject to change without notice.
Fi-ra Photonics Co., Ltd.
Sing
le w
indo
w
1×N
Fib
er C
oupl
er
Single Window 1×N Fiber Coupler
90 x 30 x 7.53.0(φ) × 60(L), 4.0(φ) × 70(L)㎜
1 × 4
7.8≤ 1.2
≤ 0.25≤ 0.002≤ 0.002dB/℃Temperature Sensitivity
≤ 1.2dBUniformity
㎜
℃
dB
dB
dB㎚
UNIT
- 40 to + 70≥ 55
1310 ± 10, 1550 ± 10
1 × 3
Package Dimension(L x W x H)
Operating TemperatureDirectivity
≤ 0.25PDL
5.8Insertion Loss *Operating Wavelength
P A R A M E T E R
Features• Single Fusion Compact Size• Ultra Low polarization Sensitivity• Wavelength Independent• Highly Stable and Reliable
Applications• Telecommunications• CATV• Subscriber Loop• Local Area Network
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
* : Without Connectors
Ordering InformationFSWFC – XXXX – P2 – XX – XX
Coupling Ratio3333 : 33/33/33
2525 : 25/25/25/25
GradeP : Premium
Wavelength
2 : 1550
Port3 : 1 × 3
4 : 1 × 4
Package
1 : SUS Tube Package& 250㎛ Coated Fiber
2 : SUS Tube Package& 900㎛ Loosed Tube Fiber
3 : Al-case package& 900㎛ Loosed Tube Fiber
4 : Al-case Package& 2.4mm Jacketed Fiber
Fiber Length1 : 1m2 : 2m …
Connector Type
0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Single Window 1×N Fiber Coupler is highly stable
for multi-port optical signal splitting. It has very good
uniformity, low excess loss and very low polarization
sensitivity. All devices are tested according to
industry standard test procedures and are supplied
with all pertinent measurement data.
Specifications
♣ Specifications subject to change without notice.
Fi-ra Photonics Co., Ltd.
Sing
le W
indo
wW
ideb
and
Fibe
r Cou
pler
Single WindowWideband Fiber Coupler
3.4 (Max.)dBInsertion Loss *
3.0(φ) × 54(L),85(L) ×17(W) ×7(H)
㎜Package Dimension
- 40 to + 85℃Operating Temp. Range≥ 55dBDirectivity≤ 0.1dBPDL≤ 0.6dBUniformity≤ 0.1dBExcess Loss *
± 40 or ± 80㎚Wavelength Bandwidth1310 or 1550㎚Operating Wavelength
For 50 : 50 Coupling RatioUNITP A R A M E T E R
Single Window Wideband Fiber Coupler(WFC) is used to passively split or combine light between two fibers. The device is fabricated using fused biconictapering technique.
The coupling ratio is designed according to customer requirements. Various types of connectors are available.
Features• Low insertion loss & PDL• Excellent performance • 1310 or 1550 single window• High stability and reliability
Applications• Telecommunications• CATV & access networks• Test equipments
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
* : Without Connectors
Ordering InformationFSWFC – XXXX – XX – XX – XX
Coupling Ratio5050 : 50 / 504060 : 40 / 603070 : 30 / 702080 : 20 / 801090 : 10 / 900595 : 05 / 950199 : 01 / 99
GradeP : Premium
Wavelength
1 : 13102 : 1550
Port1 : 1 × 22 : 2 × 2
Package
1 : SUS Tube Package& 250㎛ Coated Fiber
2 : SUS Tube Package& 900㎛ Loosed Tube Fiber
3 : Al-case package& 900㎛ Loosed Tube Fiber
4 : Al-case Package& 2.4mm Jacketed Fiber
Fiber Length1 : 1m2 : 2m …
Connector Type
0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Specifications
♣ Specifications subject to change without notice.
Fi-ra Photonics Co., Ltd.
Dua
l Win
dow
Wid
eban
d Fi
ber C
oupl
er
Dual Window Wideband Fiber Coupler
3.4 (Max.)dBInsertion Loss *
3.0(φ) × 54(L),85(L) ×17(W) ×7(H)
㎜Package Dimension
- 40 to + 85℃Operating Temp. Range≥ 55dBDirectivity≤ 0.1dBPDL≤ 0.6dBUniformity≤ 0.1dBExcess Loss *
± 40 or ± 80㎚Wavelength Bandwidth1310 & 1550㎚Operating Wavelength
For 50 : 50 Coupling RatioUNITP A R A M E T E R
Dual Window Wideband Fiber Coupler(WFC) is used to passively split or combine light between two fibers. The device is fabricated using fused biconictapering technique.
The coupling ratio is designed according to customer requirements. Various types of connectors are available.
Features• Low insertion loss & PDL• Excellent performance • 1310 & 1550 dual window• High stability and reliability
Applications• Telecommunications• CATV & access networks• Test equipments
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
* : Without Connectors
Ordering InformationFDWFC – XXXX – X3 – XX – XX
Coupling Ratio5050 : 50 / 504060 : 40 / 603070 : 30 / 702080 : 20 / 801090 : 10 / 900595 : 05 / 950199 : 01 / 99
GradeP : Premium
Wavelength
3 : 1310 & 1550
Port1 : 1 × 22 : 2 × 2
Package
1 : SUS Tube Package& 250㎛ Coated Fiber
2 : SUS Tube Package& 900㎛ Loosed Tube Fiber
3 : Al-case package& 900㎛ Loosed Tube Fiber
4 : Al-case Package& 2.4mm Jacketed Fiber
Fiber Length1 : 1m2 : 2m …
Connector Type
0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Specifications
♣ Specifications subject to change without notice.
Fi-ra Photonics Co., Ltd.
Wavelength Division Multiplexer
3.0(φ) × 54(L), 85(L) × 17.5(W) × 7.5(H),
㎜Package Dimension
- 40 to + 85℃Operating Temp. Range≥ 60dBDirectivity≤ 0.1dBPDL≥ 17dBIsolation≤ 0.4dBInsertion Loss± 15㎚Wavelength Bandwidth
1310/1510, 1310/1530, 1310/1550, 1310/1570 ㎚Operating WavelengthPremiumUNITP A R A M E T E R
Wav
elen
gth
Div
isio
n M
ultip
lexe
r
Wavelength Division Multiplexer (WDM) is
fabricated using advanced fused biconic
tapering technique. The device is designed
for bi-directional optical transmission systems.
Various types of connectors are available.
This device is ideal for combining on splitting
light signals in the 1310 and 1550 bands.
Features• Low insertion loss & PDL• Bi-directional • High stability and reliability
Applications• Telecommunications• CATV fiber optic links • Test equipments
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
* : Without Connectors
Ordering InformationFWDM – XXXX – X0 – XX – XX
Wavelength3151 : 1310/15103153 : 1310/15303155 : 1310/15503157 : 1310/1570
GradeP : Premium
Port1 : 1 × 22 : 2 × 2
Package
1 : SUS Tube Package& 250㎛ Coated Fiber
2 : SUS Tube Package& 900㎛ Loosed Tube Fiber
3 : Al-case package& 900㎛ Loosed Tube Fiber
4 : Al-case Package& 2.4mm Jacketed Fiber
Fiber Length1 : 1m2 : 2m …
Connector Type
0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Specifications
♣ Specifications subject to change without notice.
Fi-ra Photonics Co., Ltd.
Pum
p W
DM
Pump WDM
㎜
℃
dBdBdBdB㎚
㎚
UNIT
3.0(φ) × 45(L), 85(L) ×17(W) ×7(H)
- 20 to + 70≥ 55
≤ 0.15≥ 20≤ 0.2± 10
980 / 1550Premium
Package Dimension
Operating Temp. RangeDirectivity
PDLIsolation
Insertion Loss *Wavelength BandwidthOperating WavelengthP A R A M E T E R
Pump WDM is fabricated using advanced fused
biconic tapering technique. Various types of
connectors are available.
Features• Low insertion loss & PDL• High stability and reliability• Ultra high isolation
Applications• EDFA• Telecommunications• Subscriber Loop• Fiber optics sensors
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
* : Without Connectors
Ordering InformationFPWDM – 9855 – X0 – XX – XX
Wavelength9855 : 980/1550
GradeP : Premium
Port1 : 1 × 22 : 2 × 2
Package
1 : SUS Tube Package& 250㎛ Coated Fiber
2 : SUS Tube Package& 900㎛ Loosed Tube Fiber
3 : Al-case package& 900㎛ Loosed Tube Fiber
4 : Al-case Package& 2.4mm Jacketed Fiber
Fiber Length1 : 1m2 : 2m …
Connector Type
0 : None1 : FC/UPC2 : SC/UPC3 : LC/UPC4 : MU5 : FC/APC6 : SC/APC
Specifications
♣ Specifications subject to change without notice.
Fi-ra Photonics Co., Ltd.
Mul
timod
e Fi
ber C
oupl
er
Multimode Fiber Coupler
50:5050:50
1x2 or 2x2Configuration
≤ 1.5≤ 1.0≤ 4.5
A-Grade
㎜
℃
dBdBdBdB㎛
㎚
UNIT
250㎛ Bare Fiber : 3.0(φ) × 54(L) 900㎛ Loosed Tube : 3.0(φ) × 60(L)
- 40 to + 70≥ 40
≤ 1.0≤ 0.5≤ 4.0
50/125 or 62.5/125850 or 1310 or 1550
Premium
Package Dimension
Operating Temp. RangeDirectivity
Typical Excess LossUniformity
Max. Insertion Loss *Fiber Type
Operating Wavelength
P A R A M E T E R
Multimode fiber couplers are highly stable for multi
port optical signal splitting. The couplers have good
uniformity, low excess loss and very low polarization
sensitivity. All devices are tested according to
industry standard test procedures and are supplied
with all pertinent measurement data.
Features• Low excess loss• Good uniformity• Excellent environmental stability
Applications• Data link• LAN• Sensors
Office. 974-17, WolChul-Dong, Buk-Gu, GwangJu, 500-460, Rep. of KoreaTel. +82-62-600-0000 Fax. +82-62-600-0099 E-mail. [email protected] URL. http://www.fi-ra.com
Fi-ra Photonics Co., Ltd.
* : Without Connectors