Topic:ELECTRIC FIELD97.315 Basic E&M and Power Engineering
Lecture 2 TITLETITLE
• Theory• Field and force
• One point charges, n = 1
• Units
• Examples of calculation• Point charges
• Theory
• Multiple point charges, n > 1
• Examples of calculation
• Two point charges
• Assignment
• References
• Summary
•Theory
• Charge distributions
• Linear
• Surface
• Volume
•Examples of calculation
• Line
• …..
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 1 OUTLINEOUTLINE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Action at a distance!!!!!
Qoq oq
How do the charges qoknow of the presence of the large charge Q?
sun
earth
Similar to the action at a distance force of gravitation
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 THEORYTHEORY
Gravity: Another action at a distance effect!!!!
sun
earth
Introduce the idea of a gravitational field. A mass placed in the gravitational field will experience a gravitational force.
Field
Test mass
Force
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
We define an electric field similar to that of a gravitational field.
A charge produces an electric field such that when another “test” charge is placed in the field it will experience an electrical force.
Electric field
Test charge
Electric force
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
qFE�
�
�
q
F�
The electric field at any point is the force per unit charge experienced by a charge at that point.
Since the electric force is a vector then the electric field is also a vector.
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field and electric force are vectors which point in the same direction when the test charge q is positive.
q F�
qFE�
�
�
Lecture 2 THEORYTHEORY
q
F�
The electric field lines for a positive source charge point away from the source charge.
The electric field lines for a negative source charge point towards the source charge.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Consider two point charges (+Q and +q) again and the force that exists between them.
q
r
F�
rrQqkF ˆ2�
�
Electric force on q
Electric field at qQ
rrQk
qFE ˆ
2��
�
�
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 1 UNITSUNITS
[k]-Coulomb constant; meter/Farad {m/F}
[q]-charge; Coulomb {C}
[r]-distance; meters {m}
[E]-Electric field; Newton/Coulomb {N/C}
[E]-Electric field; Volt/meter {V/m}
Q
r�P Observation point
rrQkE ˆ2�
�
ELECTRIC FIELD
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture TEXTTEXT
(1) Electric field is a vector quantity. Thus at all points where the electric field exists it has magnitude and direction.
Some properties of the electric field for a POINT CHARGE QSome properties of the electric field for a POINT CHARGE Q
(2) The charge q must be small and positive such that it does not disturb the source charge Q.
(3) For a positive source charge Q the electric field vector and the electric force on the test charge qare in the same direction.
(4) For a positive source charge Q, the electric field lines are directed away from the charge.
(5) For a point charge Q located at the origin the electric field vector is:
rrQkE ˆ2�
�Y r�
� � � �
� � � � ��
���
���
���
�
���
�
���
�
yxrˆˆ
cossinsincos
ˆˆ
��
��
�
x
y
+Q X
97.315 Basic E&M and Power Engineering Topic: COULOMB FORCE
PROBLEM SOLVING STRATEGYPROBLEM SOLVING STRATEGY
1. Consistent units are essential. Distances must be in meters,charge in coulombs. Don’t forget to convert.
2. Remember that the electric force is a vector quantity. You may want to go back and review vector algebra. It’s often useful to use components in an (x, y, z) coordinate system. Be sure to use the correct vector notation. Indicate your coordinate axes clearly on your diagram, and be certain that the components are consistent with your choice of axes.
3. In working out directions of electric field vectors, be careful to distinguish between source point and the field point P. The field produced by a positive point charge always points in the direction from the source point to field point; the opposite is true for a negative point source.
Lecture 1 ASSIGNMENTASSIGNMENT
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)What is the electric field 30 cm from a charge q = 4.0 nC?
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)What is the electric field 30 cm from a charge q = 4.0 nC?
CnCq 9100.40.4 �
���
mcmr 110330 �
���
2
29100.9
41
CNm
o
�
��
��
rrqE
o
ˆ4
12
��
�
�
rCNE ˆ400�
�
q
r
P
X
Y
Z r
�
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 EXAMPLEEXAMPLE
Example (Alternate Solution)r
rqqF
o
ˆ4
12
��
��
�Obtain the force on a test charge
CnCq 9100.40.4 �
���
q�
r
X
r
�
�
Zmcmr 110330 �
���
2
29100.9
41
CNm
o
�
��
��
rCNqF ˆ400 ��
�
q Y
rCN
qFE ˆ400��
�
�
�
Then obtain the electric field
END
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)A charged raindrop carrying 10 �C experiences an
electric force of 0.30 N in the +x direction. What is the electric field at this location? What would be the force on a -5.0 �C drop at the same location?
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A charged raindrop carrying +10 �C experiences an
electric force of 0.30 N in the +x direction. What is the electric field at this location? What would be the force on a -5.0 �C drop at the same location?
Lecture 2 EXAMPLEEXAMPLE
Cq �10���
xNF ˆ30.0�
�
CxNE 61010ˆ30.0�
��
�
�
xCNE ˆ100.3 4
��
�
Electric field at location of charge q�
qFE�
�
�
�
Y
X
Z
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A charged raindrop carrying +10 �C experiences an
electric force of 0.30 N in the +x direction. What is the electric field at this location? What would be the force on a -5.0 �C drop at the same location?
EqF��
��
Lecture 2 EXAMPLEEXAMPLE
Cq �0.5���
xCNE ˆ100.3 4
��
�
xCNCF ˆ100.3105 46
������
�
xNF ˆ15.0��
�
Electric force on negative charge q�
Y
X
Z
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Summary)A charged raindrop carrying +10 �C experiences an
electric force of 0.30 N in the +x direction. What is the electric field at this location? What would be the force on a -5.0 �C drop at the same location?
You might wonder if the field should point in the -x direction when we talk about putting a negative charge in the field. It doesn’t because the whole point of the field concept is to provide a description that’s independent of the particular charge experiencing that force. The electric field in this example points in the +x direction no matter what charge we may choose to put in the field. For a positive charge the force q’E points in the same direction as the field; for a negative charge q’ < 0, and the force is opposite the field direction. As always the algebra takes care of the sign.
Cq �0.5���
F�
E�
x
Lecture 2
Cq �10���
F�
E�
ENDEXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by multiple point charges (n = 2)
q1
Lecture 2 THEORYTHEORY
X
Y
q2
r�1r�
2r�
ZP
q1 and q2 are the source point charges.
P is the field point
The charges (q1 and q2) produce the electric field observed at the point P
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Consider each charge in turn, independently of all other charges present.
q1
Lecture 2 THEORYTHEORY
X
Y
1E�
2E�
Charge q1 produces an electric field at point P.
Charge q2 produces an electric field at point P2E
�
1E�
ZP
q2
The total electric field at P is the vector sum of the electric field produced by each individual charge. 21 EEEP
���
��
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Consider charge q1 only
Lecture 2 THEORYTHEORY
X
Y
Zq1
q2
r�
1rr ��
�
1r�
Electric field produced by charge q1 at P
��
���
��
���
�
�
�
1
12
1
11 rr
rrrr
kqE��
��
��
�
P
Distance separating q1 and P
Unit vector along line joining q1 and P
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Consider charge q2 only
q1
Lecture 2 THEORYTHEORY
X
Y
q2
r�
2rr ��
�
2r�
Electric field produced by charge q2 at P
��
���
��
���
�
�
�
2
22
2
22 rr
rrrr
kqE��
��
��
�
ZP
Distance separating q2 and P
Unit vector along line joining q2 and P
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
The total electric field at P is the vector sum of the electric field produced by each individual charge.
2rr ��
�
X
Y
Zq1
q2P
r�
1rr ��
�
1r�
2r�
��
���
��
���
�
�
�
��
���
��
���
�
�
�
2
22
2
2
1
12
1
1
rrrr
rrkq
rrrr
rrkqE
��
��
��
��
��
��
�
21 EEEP
���
��
� � � �3
2
223
1
11
rrrrkq
rrrrkqE
��
��
��
��
�
�
��
�
��
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by multiple point charges (n > 1)
The total electric field at P is the vector sum of the electric field produced by each individual charge.
�� �
�
�
n
i i
ii
rrrrqkE
13��
��
�
....4321 ����� EEEEE�����
X
Y
Zq1
q2P
q3
q4
q5
qn
qi
ir�
irr ��
�
r�
��
�
n
iiEE
1
��
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
PRINCIPLE OF SUPERPOSITIONPRINCIPLE OF SUPERPOSITION
Given a group of charges we find the net electric field at any point in space by using the principle of superposition. This is a general principle that says a net effect is the sum of the individual effects. Here, the principle means that we first compute the electric field at the point in space due to each of the charges, in turn. We then find the net electric field by adding these electric fields vectorially, as usual.
....4321 ����� EEEEE�����
��
�
n
iiEE
1
��
Lecture 2 TEXTTEXT
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)The figure shows two point charges each of +10 nC
separated in air by 8.0 m. Compute the electric field at the points A, B, and C
+ +A
B
C
x
y4
4�
4 )(m
)(m
)(m
nC10�
nC10�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)The figure shows two point charges each of +10 nC
separated in air by 8.0 m. Compute the electric field at the points A, B, and C
Point A: Make a sketch of the layout and then draw in vectors for the fields E1 produced by q1 and E2 produced by q2. To do that imagine a positive test charge at A. The force on it due to the charge q1 acts along the center-to-center line, is repulsive, and so points to the right. That means the E1 at A is to the right along the axis. Similarly, the force due to q2 on our imaginary test charge is to the left as is E2. Next calculate E1 and E2 and add them vectorially. We are spared this effort since E1 = E2, the two cancel and the field at A is zero
+ +A
2E�
1E�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)The figure shows two point charges each of +10 nC
separated in air by 8.0 m. Compute the electric field at the points A, B, and C
Point B: At point B the fields act as drawn in the figure, and we must find their components. First we will calculate E1 and E2.
Lecture 2 EXAMPLEEXAMPLE
+ +
B2E�
1E�
� o45
X
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Point B: Since the charges and distances happen to be the same, the magnitudes of the two contributing fields are equal:
� �
2
9
2
29
221
45sin0.4
)100.10()100.9(��
���
�
���
�
om
CC
NmrqkEE
CNE 81.21 �
Now for the vector components
+ +
B2E�
1E�
� o45
XLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Point B: Since the charges and distances happen to be the same, the magnitudes of the two contributing fields are equal:
� �� �yxCNE ˆ)45sin(ˆ)45cos(81.21 ��
�
� �� �yxCNE ˆ)45sin(ˆ)45cos(81.22 ���
�
+ +
B2E�
1E�
� o45
XLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Point B: The horizontal field components are equal and act in opposite direction. They will cancel. Only the vertical field components contribute, and in the same direction.
� � � � )707.0)(81.2(245sin45sin 21 CNEEE oo
B ���
CNEB 0.4�
The direction is straight up in the positive y-direction
Y
X+ +
B2E�
1E�
� o45
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Point C: The point C is similarly located with respect to the charges as point B is.The field magnitude at C is the same as at B except the direction is straight down in the negative y-direction.at
� � � � )707.0)(81.2(245sin45sin 21 CNEEE oo
B ���
+ +A
B
C
x
y4
4�
4 )(m
)(m
)(m
nC10�
nC10�
CNEC 0.4�
The direction is straight down in the negative y-direction
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)The figure shows two point charges each of +10 nC
separated in air by 8.0 m. Compute the electric field at the points A, B, and C
Additional figures related to this example question
+ +
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)A molecule consist of separate regions of positive and
negative charge, modeled approximately as a positive charge q at x = a and a negative charge -q at x = -a. Find the general expression for the electric field at any point on the y axis and an approximate expression valid at large distances (y >> a)
- +ax �� ax ��
x
y r r�
E�
�E�
�E�
�
+ +�
+
-
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A molecule consist of separate regions of positive and
negative charge, modeled approximately as a positive charge q atx = a and a negative charge -q at x = -a. Find the general expression for the electric field at any point on the y axis and an approximate expression valid at large distances (y >> a)
The figure shows the individual field vectors E+ and E- along with their sum. The y components cancel to give a net field parallel to the x axis.
- +ax �� ax ��
x
y r r�
E�
�E�
�E�
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
The x components of the two fields are clearly the same so we have:
� ���
���
����
���sin2 2r
qkEEE xxx
The minus sign occurs because the net field points in the negative x direction.
- +ax �� ax ��
x
y r r�
E�
�E�
�E�
�Also22 ayr ��
� �22
sinay
ara
�
���
Then
� �x
ay
kqaxEE x ˆ2ˆ2
322�
���
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
Does this result make sense: Try the point y = 0.
� �x
ay
kqaxEE x ˆ2ˆ2
322�
���
�
xakqxEE x ˆ2ˆ 2���
�
At y = 0 gives
- +ax �� ax ��
x
y r r�
E�
�E�
�E�
�
Which is indeed twice the field of either charge at a distance a.
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
+ +�
+-
We are frequently interested in the field far from a dipole which is the reason why this example asks for an approximate expression for the electric field at y >> a.
In this case we can thus neglect a2 compared to y2 in our expression for the electric field giving:
xykqaE
ayˆ2lim 3��
��
�
xakqxEE x ˆ2ˆ 2���
�
- +ax �� ax ��
x
y r r�
E�
�E�
�E�
�
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous charge distributionElectric field produced by a continuous charge distribution
Lecture 2 THEORYTHEORY
Charged volume
Charged lineIn is often useful to imagine that there is a continuous distribution of charge.
The principle of superposition applies provided the charge distribution is divided into small elements of charge �q and the total electric field at an observation point is obtained by summing all electric field contributions from each element �q.
Charged surface
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous charge distributionElectric field produced by a continuous charge distribution
Lecture 2 THEORYTHEORY
Charged volume
Charged lineIn is often useful to imagine that there is a continuous distribution of charge.
Charged surface Recall in calculus
�� ����
dqqq 0
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
rdq
dq
dq
r
r r
rr
P
Ed�
Ed�
Ed�
E�
The electric field at the point P is the sum of the vectors arising from the individual charge elements dq in the entire distribution, each calculated using the appropriate distance r and unit vector .
Ed�
r�
Lecture 2 SUMMARYSUMMARY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous line of chargeElectric field produced by a continuous line of charge
r�
dq�d
�� Linear charge density on the line
� ��� Units; {C/m}
��ddq �� Charge on length segment �d
�� ��
LL rdrkEdE 2
ˆ�
����
�
rrdqkEd ˆ2�
�
�
Electric field produced by all segments along line of length L
L
Electric field produced at P by one segment dq
P
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous line of chargeElectric field produced by a continuous line of charge
P
r�
dq�d
L
�� ��
LL rdrkEdE 2
ˆ�
����
�
,.....dxd ��
may be a function of the coordinatesusually a constant
��
��41
�k
,....222 zyxr ����
Integration over length of line charge unit vector
function of (x,y,z),….Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous surface of chargeElectric field produced by a continuous surface of charge
P Electric field produced at P by one segment dq
r�
dqdA
Ss�
rrdqkEd ˆ2�
�
�
Electric field produced by all segments of surface SSurface charge density
Units; {C/m2}� �s�
dAdq s�� �� ��
S
s
S rdArkEdE 2
ˆ�
�� �
Charge on surface element dA
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous surface of chargeElectric field produced by a continuous surface of charge
r�
dqdA
S�� ��
S
s
S rdArkEdE 2
ˆ�
�� �
,.....dxdydA �
�s may be a function of the coordinatesusually a constant
,....222 zyxr ����
��41
�k
Integration over surface of charge
unit vectorfunction of (x,y,z),….
P
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous volume of chargeElectric field produced by a continuous volume of charge
Electric field produced at P by one segment dq
P
r�
dV
dq
V� Volume charge density
rrdqkEd ˆ2�
�
�
Electric field produced by all segments in volume V
V
�� ��
V
V
V rdVrkEdE 2
ˆ�
�� �� �V� Units; {C/m3}
dVdq V�� Charge in volume element dV
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Electric field produced by a continuous volume of chargeElectric field produced by a continuous volume of charge
P
r�
�� ��
V
V
V rdVrkEdE 2
ˆ�
�� �
dV
dq
,....222 zyxr ����
,.....dxdydzdV ���41
�k
�V may be a function of the coordinatesusually a constant
Integration over volume of charge
unit vectorfunction of (x,y,z),….
V
Lecture 2 THEORYTHEORY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)Wires, antennas, and similar
elongated structures can often be considered as thin rods carrying electric charge. Suppose a rod of length carries a positive charge Q distributed uniformly over its length. Find the electric field at the point P a distance a from the end of the rod.
� dq
dy
y
P0�y
a
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Wires, antennas, and similar elongated
structures can often be considered as thin rods carrying electric charge. Suppose a rod of length carries a positive charge Q distributed uniformly over its length. Find the electric field at the point P a distance a from the end of the rod.
� dq
dy
y
P0�y
a
�
Let the y axis lie along the rod, with origin at P. Consider a small length dy of the rod, containing charge dq, and located a distance y from P. A unit vector from dq to P is: y�
The field at P due to dq is:
yydqkEd ˆ
2��
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Wires, antennas, and similar elongated
structures can often be considered as thin rods carrying electric charge. Suppose a rod of length carries a positive charge Q distributed uniformly over its length. Find the electric field at the point P a distance a from the end of the rod.
� dq
dy
y
P0�y
a
�
The net field at P is the sum- that is the integral- of all the fields arising from all the dq’s along the rod:Ed
�
����
����
����
����
��� ay
ayy
ydqkEdE ˆ2
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
dq
dy
y
P0�y
a
�
In order to evaluate the integral we must relate dq to y. The rod carries a uniform charge Q distributed over the length . The line charge density is therefore: �
��
Q��
This is the charge per unit length. Thus a length dycarries charge dq given by:
����
����
����
����
��� ay
ayy
ydqkEdE ˆ2
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
dq
dy
y
P0�y
a
�
���
����
����
���
�� ay
ay ydqykE 2ˆ
���
����
����
���
�
�
� ay
ay ydyyQkE 2ˆ
�
�
��
���
����
� ���
a
ayyQkE 1ˆ
��
���
�
���
��
�
aayQkE 11ˆ
� �y
aakQE ˆ�
�
�
��
Does this answer make sense?Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
END
dq
dy
y
P0�y
a
�
Example (Solution)� �
yaakQE ˆ�
�
�
��
Consider ���a
yakQE
aˆlim 2
�
�
��
�
�
The rod appears as a small concentration of total charge Q at a distance a away from the point P
Does this answer make sense?Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)A long straight power line coincides with the x axis and
carries a linear charge density C/m. What is the electric field at point P on the y axis. Use the approximation that the line is infinitely long.
��
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A long straight power line coincides with the x axis and carries a linear
charge density C/m. What is the electric field at point P on the y axis. Use the approximation that the line is infinitely long.
��
Here both the direction and magnitude of the electric field element dE arise from charge elements on the line vary with the position x of the charge element.
Lecture 2 EXAMPLEEXAMPLE
The figure shows that charge elements on opposite sides of the y axis give rise to electric fields whose x components cancel. Thus the net field points in the y direction, that is away from the positively charged rod.
dq
22 yxr ��
x
y
P�
dq
Ed�
Ed�
yEd�
�
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A long straight power line coincides with the x axis and carries a linear
charge density C/m. What is the electric field at point P on the y axis. Use the approximation that the line is infinitely long.
��
Each element of charge dq contributes an amount dEy to the net electric field at P.
� ��cos2rdqkdEy �
dxdq�
��
With:
22 yxr ��
� �22
cosyx
y�
��
dq
22 yxr ��
x
y
P�
dq
Ed�
Ed�
yEd�
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A long straight power line coincides with the x axis and carries a linear
charge density C/m. What is the electric field at point P on the y axis. Use the approximation that the line is infinitely long.
��
Each element of charge dq contributes an amount dEy to the net electric field at P.
� � 2322 yx
ydxkdEy�
��
�
� ���
��
��
�
���
2322 yx
ydxkdEEE yy�
�
dq
22 yxr ��
x
y
P�
dq
Ed�
Ed�
yEd�
�
We integrate from x = -� to x = +�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
� ���
��
��
�
���
2322 yx
ydxkdEEE yy�
�
��
��
��
�
�
��
�
�
��
222 yxyxykE
��
��
���
� ��� 22
11yy
ykE�
�
ykE ��2
�
dq
22 yxr ��
x
y
P�
dq
Ed�
Ed�
yEd�
�
x limits
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
Since the line is infinite in both directions and has cylindrical symmetry, the expression for the electric field holds for any point a distance y from the line. The result thus shows that the electric field from a positively charged infinite line points radially away from the line.
ykE ��2
�
dq
22 yxr ��
x
y
P�
dq
Ed�
Ed�
yEd�
�
The magnitude of the E field drops as
1/y
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)A thin ring of radius a is centered on the origin and
carries a total charge Q distributed uniformly around the ring. Find the electric field at a point P located a distance x along the axis of the ring, and show that the result makes sense at x >> a.
dq
a
O
�
22 ax �
x
PEd�
xEd�
�
Ed�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A thin ring of radius a is centered on the origin and carries a total
charge Q distributed uniformly around the ring. Find the electric field at a point P located a distance x along the axis of the ring, and show that the result makes sense at x >> a.
A point on the ring axis is equidistant from all points on the ring, so the field magnitudes dE are the same but their directions vary.
dq
a
O
�
22 ax �
x
PEd�
xEd�
�
Ed�
The figure shows that any components perpendicular to the x axis cancel for any pair of charge elements on opposite sides of the ring, leaving a net field in the x direction.
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A thin ring of radius a is centered on the origin and carries a
total charge Q distributed uniformly around the ring. Find the electric field at a point P located a distance x along the axis of the ring, and show that the result makes sense at x >> a.
Each charge element dq contributes an amount dEx to the total field.
� ��cos2rdqkdEx �
with22 axr ��
� �22
cosax
x�
��
� � 2322 ax
xdqkdEx�
�
Gives
dq
a
O
�
22 ax �
x
PEd�
xEd�
�
Ed�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)
In this example k, x, and a are constants so we have:
���
ringxx dEEE
� ��
�
�
ring ax
xdqkE2
322
� ��
�
�
ring
dqax
xkE2
322
� � 2322 ax
xQkE�
�
dq
a
O
�
22 ax �
x
PEd�
xEd�
�
Ed�
Does this result make sense?Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A thin ring of radius a is centered on the origin and carries a
total charge Q distributed uniformly around the ring. Find the electric field at a point P located a distance x along the axis of the ring, and show that the result makes sense at x >> a.
At a large distance from the ring x >> a.dq
a
O
�
22 ax �
x
PEd�
xEd�
�
Ed�
2limxQkE
ax�
��
The ring appears as a small concentration of total charge Q at a distance x from the point P.
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)Find the electric field caused by a uniform surface charge
density �s on a disk of radius R, at a point along the axis of the disk a distance x from its center. Assume that x is positive.
P xdExx
Qdr
dQ
R
rO
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Find the electric field caused by a uniform surface charge density �s
on a disk of radius R, at a point along the axis of the disk a distance x from its center. Assume that x is positive.
We can represent the charge distribution as a collection of concentric rings of charge. We already have the expression for the field produced from one ring, so all we have to do is add the contributions from all the rings.
P xdExx
Qdr
dQ
R
rO
� � 2322 ax
xQkE�
�
Result for one ring of charge Q and radius aLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Find the electric field caused by a uniform surface charge density �s
on a disk of radius R, at a point along the axis of the disk a distance x from its center. Assume that x is positive.
Execute a change of variables:
rdrQ s��2�
ra �
xdEE �
P xdExx
Qdr
dQ
R
rO
� � � � 23222
322
2
rx
rdrxkdEax
xQkE sx
�
��
�
���Then
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Find the electric field caused by a uniform surface charge density �s
on a disk of radius R, at a point along the axis of the disk a distance x from its center. Assume that x is positive.
Lecture 2 EXAMPLEEXAMPLE
To find the total field due to all the rings, we must integrate over r from 0 to R.
� ���
�
��
Rs
R
xrx
rdrxkdEE0 2
3220
2��
P xdExx
Qdr
dQ
R
rO
Then
� ���
�
��
R
s
R
xrx
rdrkxdEE0 2
3220
2��
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Find the electric field caused by a uniform surface charge density �s
on a disk of radius R, at a point along the axis of the disk a distance x from its center. Assume that x is positive.
� ��
�
�
R
srx
rdrxkE0 2
3222��
� �
R
srx
xkE0
2122
12��
�
�
��
�
�
�
� ��
P xdExx
Qdr
dQ
R
rO
� � ��
�
�
��
�
��
��
xRxxkE s
1122
122��
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)A spherical shell of radius R is uniformly charged
with surface charge density �s. Find the electric field at an exterior point.
R
P
Uniform surface charge on shell.
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A spherical shell of radius R is uniformly charged with surface
charge density �s. Find the electric field at an exterior point.
R
r�
� � � � � �2122
122
12 zzyyxxr �������
here � �222 ,, zyx
dA (x1,y1,z1)P (x2,y2,z2)
constants and
variables that depends on location of dA. � �111 ,, zyx
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A spherical shell of radius R is uniformly charged with surface
charge density �s. Find the electric field at an exterior point.
P (x2,y2,z2)
R
(x1,y1,z1)r�
� � � � � �� �r
zzyyxxr �
121212 ,,ˆ ���
�
rdA
variable that depends on location of dA. Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A spherical shell of radius R is uniformly charged with surface
charge density �s. Find the electric field at an exterior point.
R
(x1,y1,z1)r�
variable that depends on location of dA.
dA
dAdq s��
P (x2,y2,z2)
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A spherical shell of radius R is uniformly charged with surface
charge density �s. Find the electric field at an exterior point.
R
variable that depends on location of dA.
dAdq s��
� � ���� ddRdq s sin2�
�
�
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Field at P produced by charge element dq:
R
dq
�
�
rrdqkEd ˆ2�
�
�
r� r
� �
� � � � � �� �� � � � � �� �121212
232
122
122
12
2
,,sin zzyyxxzzyyxx
ddRkEd s���
�����
������
P
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Field at P produced by all charge elements dq is obtained by vector summation of all the field contributions from each surface charge element.
� �
� � � � � �� �� � � � � �� ��� ���
�����
��
Surface
s
Surface
zzyyxxzzyyxx
ddRkEdE 1212122
3212
212
212
2
,,sin ������
This is not an easy task. It can be done but requires a lot of work. It can best be solved by converting from (x,y,z) coordinates to (r,�,�) coordinates.
We will see an easier way to obtain the electric field from surface and volume charge distributions: Gauss’s law.Gauss’s law.
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Question)A cylindrical volume of radius R is uniformly
charged with volume charge density �V. Find the electric field at an exterior point.
Lecture 2 EXAMPLEEXAMPLE
P
R
Uniform volume charge in cylinder.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A cylindrical volume of radius R is uniformly charged with
volume charge density �V. Find the electric field at an exterior point.
Lecture 2 EXAMPLEEXAMPLE
R
r�
� � � � � �2122
122
12 zzyyxxr �������
here � �222 ,, zyx
(x1,y1,z1)dVP (x2,y2,z2)
constants and
variables that depends on location of dV. � �111 ,, zyx
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A cylindrical volume of radius R is uniformly charged with
volume charge density �V. Find the electric field at an exterior point.
Lecture 2 EXAMPLEEXAMPLE
P (x2,y2,z2)
R
r�
� � � � � �� �r
zzyyxxr �
121212 ,,ˆ ���
�
rdV(x1,y1,z1)
variable that depends on location of dV.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A cylindrical volume of radius R is uniformly charged with
volume charge density �V. Find the electric field at an exterior point.
Lecture 2 EXAMPLEEXAMPLE
R
(x1,y1,z1)
r�
variable that depends on location of dV.
dV
dVdq V��
P (x2,y2,z2)
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)A cylindrical volume of radius R is uniformly charged with
volume charge density �V. Find the electric field at an exterior point.
z
Lecture 2 EXAMPLEEXAMPLE
variable that depends on location of dV.
dVdq V��
dzrdrddq V ����
r
21
21
21 zyxr ���
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Field at P produced by charge element dq:
�
r
dq rrdqkEd ˆ2�
�
�
r� r
� � � � � �� �� � � � � �� �121212
232
122
122
12
,, zzyyxxzzyyxx
dzrdrdkEd V���
�����
����
P
Lecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Example (Solution)Field at P produced by all charge elements dq is obtained by vector summation of all the field contributions from each volume charge element.
� � � � � �� �� � � � � �� ��� ���
�����
��
Volume
V
Volume
zzyyxxzzyyxx
dzrdrdkEdE 1212122
3212
212
212
,,����
This is not an easy task. It can be done but requires a lot of work. It can best be solved by converting from (x,y,z) coordinates to (r,�,z) coordinates.
We will see an easier way to obtain the electric field from surface and volume charge distributions: Gauss’s law.Gauss’s law.
ENDLecture 2 EXAMPLEEXAMPLE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 SUMMARYSUMMARY
ELECTRIC FIELDELECTRIC FIELDvector
single chargecharge distribution
ELECTRIC FORCEELECTRIC FORCEvector
on chargeon charge distribution
TESTTESTCHARGECHARGE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
These questions are straight forward. Plug in the numbers and get your answer. Being able to solve this type of question ensures you of at least a grade of 25% on a quiz or final exam containing questions related to this lecture.
25
These questions require a few manipulations of equations or numbers before the answer can be obtained. Being able to solve this type of question ensures you of at least a grade of 50% on a quiz or final exam containing questions related to this lecture.
50
These question are quite involved and requires a thorough understanding of the topic material. Being able to solve this type of question ensures you of at least a grade of 75% on a quiz or final exam containing questions related to this lecture.
75
These questions are the most difficult and require a thorough understanding of the topic material and also pull in topics from other lectures and disciplines. Being able to solve this type of question ensures you an A grade on a quiz or final exam containing questions related to this lecture.
100
These form excellent review questions when preparing for the quiz and final exam.10075
25 10050 75
SELL EVALUATION SCALESELL EVALUATION SCALE
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
25 A 65 �C point charge is a the origin. Find the electric field at the points (a) x = 50 cm, y = 0 cm; (b) x = 50 cm, y = 50 cm; (c) x = -25 cm, y = 75 cm.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
25 The electron of a hydrogen atom is 0.0529 nm from the proton. What is the proton’s electric field strength at this distance?
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
25 A 1.0 �C charge and a 2.0 �C charge are 10 cm apart. Find a point where the electric field is zero.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
50 A 30 cm long rod carries a charge of 80 �C spread uniformly over its length. Find the electric field strength on the rod axis, 45 cm from the end of the rod.
mVans /101312.2: 6�
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
50 (a) Find an expression for the electric field on the y axis due to the two charge q. (b) At what point does the field on the y axis have its maximum strength?
aq
22 yar ���
YQ
y
q Xa
� �y
ay
yqaanso
ˆ2
:)(2
322�
��
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
75 Three identical charges q form an equilateral triangle of sides a, with two charges on the x axis and one on the positive y axis. (a) Find an expression for the electric field at a point on the y axis above the uppermost charge. (b) Show that your result reduces to the field of a point charge 3q for y >> a.
yay
y
ay
qaanso
ˆ
4
2
23
14
:)(2
32
2
2
2
������
�
�
������
�
�
���
����
��
�
���
����
��
��
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
75 The figure shows four point charges fixed at the corners of a rectangle, in vacuum. (a) Compute The magnitude and direction of the electric field at the center of the rectangle. (b) Compute the electrostatic force acting on the +100 �C charge.
1q
2q3q
4q m0.4
C�125�
C�100�C�32�
C�36�
� � mVyxaans /ˆ1050.2ˆ1042.2:)( 44���
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
75 A thin rod of length carries a charge Q distributed evenly over its length. A point charge with the same charge Q lies a distance b from the end of the rod. Find a point where the electric field is zero.
�
Q Q
b
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
75 The rods shown in the figure are both 15 cm long and both carry 1.2 �C of charge. (a) Find the magnitude and direction of the electric field at the point P. (b) repeat the problem where the right hand rod carries -1.2 �C of charge.
P
o45 o45
cm15
cm15 C�2.1 C�2.1
mVxbans /ˆ10339:)( 3�
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
75 Two identical rods of length lie on the x axis and carry uniform charges � Q. (a) Find an expression for the electric field strength as a function of the position x for points to the right of the right-hand rod. (b) Show that your result has the 1/x3 dependence of a dipole field for x >> . �
�
Q� Q�
��x0�x���x
xxx
Qaanso
ˆ12
:)( 23 ��
���
�
� �
�
��
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
75 A semicircular loop of radius a carries positive charge Q distributed uniformly over its length. Find the electric field at the center of the loop.
P
dq
a�
�d
xa
anso
ˆ24
:��
��
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
100 A semicircular loop of radius a carries positive charge Q non-uniformly distributed over its length. Find the electric field at the center of the loop. The charge density varies linearly with the angle � with b constant.
�� b��
P
dq
a�
�d
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
100 Determine the magnitude and direction of an electric field if the electron placed in it, in vacuum, is to experience a force that will cancel its weight at the earth’s surface.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ASSIGNMENTASSIGNMENT
100 A section of an advertising sigh consists of a long tube filled with neon gas having electrodes inside at both ends. An electric field of 20 kN/C is set up between the electrodes, and neon ions accelerate along the length of the tube. Given that the ions have a mass of 3.35 X 10-26 kg and are slightly ionized, determine (a) their acceleration and (b) terminal velocity when they reach the end of a 1 m long tube.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
A spherical shell of radius R is uniformly charged with surface charge density �s. Find the electric field at an exterior point.
100
R
P
Uniform surface charge on shell.
Lecture 2 ASSIGNMENTASSIGNMENT
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
A cylindrical volume of radius R is uniformly charged with volume charge density �V. Find the electric field at an exterior point. Assume cylinder is infinite in length.
100
Lecture 2 ASSIGNMENTASSIGNMENT
P
R
Uniform volume charge in cylinder.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
(29) A shown in the figure a positive charge +Q is located at the origin and an array of equally spaced negative charges (-q) are placed along the x axis. Obtain a compact expression for the electric field at the point P due to all the other charges when: (a) N = 1, (b) N = 2, (c) N = 10, (d) N = 100, (e) N = 1000, (f) N = infinity. You may find it instructive to plot electric field versus charge number N.
100
P -q-q -q-q -q -q -q
Xa a a a a a a
Lecture 2 ASSIGNMENTASSIGNMENT
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
(30) A shown in the figure a positive charge +Q is located at the origin and an array of equally spaced alternating sigh charges (�q) are placed along the x axis. Obtain a compact expression for the electric field at the point P due to all the other charges when: (a) N = 1, (b) N = 2, (c) N = 10, (d) N = 100, (e) N = 1000, (f) N = infinity. You may find it instructive to plot electric field versus charge number N.
100
P -q+q -q-q +q -q +q
Xa a a a a a a
Lecture 2 ASSIGNMENTASSIGNMENT
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 REFERENCESREFERENCES
(0) Inan p. 246 - 255(1) Kraus p. 12 - 15(2) Reitz p. 27 - 31(3) Plonus p. 2 - 4(4) Winch p. 258 - 266(5) Lorrain p. 40 - 42(6) Duckworth p. 5 - 8(7) Jackson p. 27 - 28(8) Ulaby p. 7, 143 - 144
(0) Textbook: U. S. Inan, A. S. Inan “Engineering Electromagnetics”
(1) J.D. Kraus, K. R. Carver “Electromagnetics” 2nd
(2) Reitz, Milford, Christy “Foundations of Electromagnetic theory” 4th
(3) M. Plonus “Applied Electromagnetics”(4) R. P. Winch “Electricity and Magnetism”(5) P. Lorrain, D. Corson “Electromagnetic fields and Waves”
2nd
(6) Duckworth “Electricity and Magnetism”(7) J.D. Jackson “Classical Electrodynamics” 2nd
(8) F. Ulaby, “Fundamentals of applied Electromagnetics”
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 REFERENCESREFERENCES
(0) Textbook: U. S. Inan, A. S. Inan “Engineering Electromagnetics”
(1) J.D. Kraus, K. R. Carver “Electromagnetics” 2nd
(2) Reitz, Milford, Christy “Foundations of Electromagnetic theory” 4th
(3) M. Plonus “Applied Electromagnetics”(4) R. P. Winch “Electricity and Magnetism”(5) P. Lorrain, D. Corson “Electromagnetic fields and Waves”
2nd
(6) Duckworth “Electricity and Magnetism”(7) J.D. Jackson “Classical Electrodynamics” 2nd
(8) F. Ulaby, “Fundamentals of applied Electromagnetics”
(0) Inan p. 255 - 269(1) Kraus p. 15 - 20(2) Reitz p. 31 - 33(3) Plonus p. 4 - 6(4) Winch p. 266 - 271(6) Lorrain p. 42 - 43(6) Duckworth p. 8 - 16(7) Jackson p. 28 - 29(8) Ulaby p.
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
X
Y
Zq1
q2
q3
q4
q5
qn
qi
ir�
irr ��
�
r�
��
�
n
iiEE
1
��
The electric field at the point P is the sum of the vectors arising from the individual charge elements dq in the entire distribution, each calculated using the appropriate distance r and unit vector .
Ed�
r�
rdq
dq
dq
r
r r
rr
P
Ed�
Ed�
Ed�
E�
PSUPERPOSITION PRINCIPLESUPERPOSITION PRINCIPLE
Lecture 2 SUMMARYSUMMARY
97.315 Basic E&M and Power Engineering Topic: ELECTRIC FIELD
Lecture 2 ENDEND