Dimensions & SpecificationsSURFACE IMMERSION
MOUNTED THERMOSTATTHERMOSTAT CONTACTORSMODEL NO. MODEL NO.
HS1 8-052 HC1 8-052HS27-052 HC27-052HS36-052 HC36-052HSl 8-082 HC1 8-082HS27-082 HC27-082NS36-082 MC36-082HS45-082 HC45-082HS54-082 HC54-082HS18-120 HC18-120HS27-120 HC27-120HS36-120 HC36-120HS45-120 HC45-120HS54-120 HC54-120
Specify Voltage and Phase. 9. 12, and 1 5 KW available.
SURFACE IMMERSIONMOUNTED THERMOSTAT
THERMOSTAT CONTACTORSMODEL NO. MODEL NO. A 1
RECOVERYCAPACITY
STORAGE @GPHCAPACITY 100° RISE KW
52 7452 11052 14882 7482 11082 14882 18482 221119 74119 110119 148119 184119 221
HSl 8-052 HC1 8-052 48" 24" 123/," 6/1" 7'HS27-052 HC27-052 48" 24" 12%" 6!f THS36-052 HC36-052 48" 24" 12 if 6/2" THSl 8-082 HC1 8-082 607." 26" UY," 6/2" THS27-082 HC27-082 60 Y," 26" 12J/(" 6X2" THS36-082 HC36-082 607." 26" 12J/T 6/2" T
•5"5"5"5"5"5"
HS45-082 HC45-082 607," 26" 12%" 6/2" 7" 5"HS54-082 HC54-082 607," 26" 12%" 6/2" 7" 5"HSl 8-1 20 HC18-120 64 ]ff 307," 123/," 77." THS27-120 HC27-120 647," 307." \TK 77," T
5"5"
HS36-120 HC36-120 64 W 307," 12J/," 77." 7" 5"HS45-120 HC45-120 64 '/f 30 If 123/," T/," 7" 5"HS54-120 HC54-120 647," 307;' 12!/«" 77." T
Amperage TableKW 208V 240V 277V18 87 75 6527 130 113 9736 173 150 13045 216 188 16354 260 225 195
FOR EASE IN ORDERINGBY MODEL NUMBER
HS X 45 082
\\ \ >This heater is a 480 volt, 3 phase, 45 KW,
surface mounted thermostats.
c@us
5"
480V 208V 240V38 5056 7575 10094 125113 150
436587
18273618273645541827364554
•41"41" OUTLE
41"
521/,"527."521/"527."527,"rc" v
"IF" yp55 Watp
55" No.
NUMBER APPROX. 1OF WATER SHIPPING 1
ELEMENTS CONNECTIONS WEIGHT |3 1 Y," 2406 1 %" 2406 1 '/,- 2403 1 'ff 3206 1 <ff 3206 1 X 3209 1 V," 3209 1 'f 3203 1 X 4356 1 'f 4356 1 K 4359 1 7f 4359 1 '/;' 435
1 a
O F(/ )X^/-1T I 1 fLCJ "J
COLD WATERINLET \
LI-},^=
ical Specificationsr Heater shall be Lochinvar Hi-P
with pa55" Rated at KW Vc.._ .__.....
__ R ____ j 34 TAP FOR\ / RELIEF VALVE
•/- ———— rSn- ————— £ —
o
4' HANDHOLECLEANOUT/ A
————— / G
/
° (D /DRAIN
— ̂ _it
ower Modellion storage,ills Phase.
55 Tank shall be 300 PSI test pressure, 1 50 PSI W.P. approved;glass-lined, with 1.315" dia. "Dow" magnesium tank saver.Elements will be copper sheath, tin coated immersion type, low
JTJJ7HI watt density (75 watts P.S.I, maximum). Tank shall be insulatedjj to AS
———— shalln • •43 insul
HRAE 90. Ib energy efficiency standards. Heater jacketbe heavy gauge steel with baked enamel finish. Internalg shall be composed of solid copper wire having anition material rated at 600V, 200° C. Heater shall have a
Oj 54 factory supplied temperature and pressure relief valve.
130
VOLTAGE SCHEDULEA— 240V IB T— 208V IB or 30B— 240V 3fl R— Special-Must SpecifyJ— 208V IB W— 277V IBK— 208V 3a X— 480V 3aP— 240V IB or 30
-iirLocHigh Efficiency
65 Cont
l.Su1mprceac
2.1mSuinc
Wateinacc
hiiivaWater Heaters And Boi
The Built-in Advantage"
Lochinvar Corporation • 2005 Elm Hill Pike • Nashville, TN 37210 •www.Lochinvar.com
rol Circuit Options:rface Mounted Thermostats (HS)ividual thermostats with built-inividing staged control and over-t;h heating element.mersion Thermostats (HC)jplied with one magnetic contactrement. 120V control circuit witr heater shall be U.L. listed and a;ordance with U.L. requirements
rers
615889-8900 Fax (615)885-4403
manual reset high limit3mperature protection for
or for each 1 8 KWi built-in transformer.pproved and shall be fused
member
Ggama
LITHO-IOM-3/00 PRINTED IN U.S.A.
-itLochinrarHigh Efficiency Water Heaters And Boilers
Hi-Power Commercial Electric WaterHeaters HS and HC models______Outstanding FeaturesEngineered and constructed for commercial,industrial, and institutional installations.
Standard Hi-Powerff/ecfficWater Heaters
• Motels1 Factories1 Schools
' Beauty shops
• Apartments1 Restaurants1 Farms
• Churches
' Heavy-Duty Glass-Lined Tank-300 PSI test pressure,150 PSI working pressure.
1 Magnesium Tank Saver-1.315"diameter for longer tanklife, greater protection.
• Heating Element-Copper sheath, tin coated-immersiontype-heats water faster, more economically-low wattdensity, (75 watts/in2).
1 Energy Cut-Off-Shuts off electrical power shouldthe water temperature in the tank reach 205° F.
• Internal Fusing-All elements and controls are fusedin accordance with U.L. requirements.
1 Approved-for 180°outlet temperature.
• Temperature and Pressure Relief Valve.*1 Handhole Cleanout.
• Insulation-Full 3"of foam insulation on the top and aroundthe sides. Meets ASHRAE Energy Efficiency Standards.
• Hinged Access Door-Provides easy access to electricalcontrols.
• Available with Surface Mounted Thermostatsor Immersion Thermostats and Contactors.
• Listed by Underwriters' Laboratories, Inc.
• Warranty-3 year limited warranty.
*Note T&P relief valve supplied, not factory mounted.
Meets ASHRAE Energy Effitien<y Standards.
-itLodiinrarHigh Efficiency Water Heaters And Boilers
Custom Hi-PowerEle<tri<Water Heaters
150 to 2500 Gallons StorageVertical and Horizontal
Energy Saving Performance
