DESIGN AND DEVELOPMENT OF LOW COST ARM CORTEX-M BASED
EVALUATION BOARD
Submitted By,LAVANYA H M(1KI10EC091)
Head of the Department,Dr. RAJASHEKARARADYA
Professor & HOD, Dept. of ECEK.I.T Tiptur.
Under the guidance of,NIRANJANA SWAMY G SAsst. professor, Dept. of ECE
K.I.T Tiptur
KALPATARU INSTITUTE OF TECHNOLOGY, Tiptur.DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
INTRODUCTION Development board is a printed circuit board with
circuitry and hardware to facilitate experimentation with certain microcontroller.
Every engineer, developer or hobbyist must have development board to implement their ideas.
LPC1768 evaluation board is based on ARM Cotex-M3 processor from NXP.
LPC1768 Development board should be low cost, less power consumption, and high processing speed.
BLOCK DIAGRAM
In-System Programming and In-Application Programming. 8 Channel DMA controller. Ethernet MAC. 4 UARTs. 2 CAN channels. 3 SSP/SPI. 3 I2C I2S. 8 Channel 12-bit ADC. 10 bit DAC. Motor controll PWM. Quadrature encoder interface. 4 General purpose timer. Watchdog timer.
FEATURES
SOFTWARE AND HARDWARE
Keil MDK-ARM software for Application development
Altium for PCB Designing, PCB board and all the semiconductor components including LPC1768 micro-controller.
THANK YOU