Cutting ToolsColumbus Fleet Industrial Supply
Canton Fleet Industrial Supply
Canton First Aid & Safety
www.cfisgroup.com Phone: 614-332-7464 1
Cutting Tools
Drill Sets & Empty Index
Part # TYPE
330-040330-039330-030330-032330-045330-070
29 PC Set Flip-Out (64th)29 PC Set Orange Round
1-60 SetA-Z Set
29 PC Reduced Shank29 PC Cobalt Set
Part # TYPE
330-001330-002330-003330-005330-007
Drill Guage15 PC Empty (32nd)29 PC Empty (64th)
1-60 EmptyA-Z Empty
Empty Index
Full Sets
Drill Sets & Empty Index
Part # TYPE
330-048330-050
S&D Drill Set 4-PCS&D Drill Set 8-PC
Part # TYPE
330-015 S&D Drill Empty
Empty IndexFull Sets
9/16, 13/16, 5/8, 7/8, 11/16, 15/16, 3/4, 1”
Drill Sets & Empty Index
Part # TYPE
330-042 56 Piece Drill SetPart # TYPE
330-020 56 Piece Drill Empty
Empty IndexFull Sets
3 ea 1/16” – 1/4”
2 ea 17/64” – 3/8”
1 ea 11/16” – 1/2”
www.cfisgroup.com Phone: 614-332-7464 2
Cutting ToolsDrill Sets & Empty Index
New CFIS Cryogenically Treated Drills
Part # TYPE
330-043 115 pc Drill Set
Full Sets
CFIS 190-CN
• CN-TECH™ 135˚ Split Point• Cryogenic treatment creates a more uniform “grain” structure by
transforming retained austenite into martensite.• Modifies the carbon micro-structure through precipitation of
carbides increasing resistance to wear.• Nitride process diffuses nitrogen into the surface to create a case
hardening resulting in superior tool life and exceptional corrosion resistance.
Cryogenic Nitride HSS Products
CFIS Cryogenic Drills
www.cfisgroup.com Phone: 614-332-7464 3
Ultra-Cut Gold Stick
• High performance cutting tool lubricants in an easy to apply, easy to carry solid stick applicator or spray.
• Easy to use - just apply directly to the cutting tool.
• High performance - provides superior lubricity for fast results, even on tough alloys.
• No mess - no fluid leaks and cleans up easily.
• Cool running - to provide extra cutting tool life.
• Superior finish & tool life when applied sparingly to grinding wheels.
• No Hazardous Ingredients.• Completely Biodegradable.• Non-Toxic.• Clean and Safe.
Part # QTY
252-000 Ea
Part # QTY
252-010 Ea
Accu-Lube Gold
Stick
Accu-Lube Gold
Spray
Lube-Cut Tapping
Fluid
Part # QTY
252-050 Ea
Cutting / Tapping
Lubricants
www.cfisgroup.com Phone: 614-332-7464 4
1 pint
8 oz
2.2 oz
Cutting Tools
Cutting Tools
WHY CHOOSE CFIS MAGNA-CUT-PLUS?
Substantially longer cutting life The nitro-carburized flute has an increased Rockwell hardness.Cuts harder materials The flatter point takes a smaller chip. More torque is directed to a smaller area. This allows drilling into materials with hardness of over 30 on the Rockwell “C” scale.
Stops drill walking The split point design of a gives accurate starting without the use of a center punch.Holds tighter hole size The split point design is self centering. This limits the normal oversize drilling characteristics.Outstanding quality appearance The rich amber gold color sets it apart from commodity cutting tools.Runs cooler, uses less torque 135° point takes a smaller chip resulting in less heat. Friction is reduced by amber gold surface treatment.Stops chuck slippage Flats on drill shanks allow easy positive chuck grip.
Good for 300 series stainless.
For 400 series stainless use Colbalt
Magna-Cut-Plus Super Premium 3 Flats on ShankSpecial Hi-Molybdenum tool steel.
135° split point for fast penetration and accurate starting without center punch. Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance.
Magna-Cut-Plus Premium Drills Jobber length 135*
Part #DRILLDIAM.
DEC-IMAL
OVERALL
341-000341-001341-002341-003341-004341-005341-006341-007341-008341-009341-010341-011341-012341-013341-014341-015341-016341-017341-018341-019341-020341-021341-022341-023341-024341-025341-026341-027341-028
1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2
.0625
.0781
.0938
.1094
.1250
.1406
.1562
.1719
.1875
.2031
.2188
.2344
.2500
.2656
.2812
.2969
.3125
.3281
.3438
.3594
.3750
.3906
.4062
.4219
.4375
.4531
.4688
.4844
.5000
1-7/822-1/42-3/82-1/22-5/82-3/42-7/833-1/83-1/43-3/83-1/23-5/83-3/43-7/844-1/164-1/84-3/164-1/44-5/164-3/84-7/164-1/24-5/84-3/44-7/85
Part # SIZE QTY341-030 1/2” Drill - 3/8” SHANK 6”
LONGEA
www.cfisgroup.com Phone: 614-332-7464 5
Cutting Tools
Magna-Cut-Plus Super Premium
3 Flats on Shank
Special Hi-Molybdenum tool steel.
135° split point for fast penetration and accurate starting without center punch.
Precision ground point, flutes, body, clearance and drill diameter for the ultimate in accuracy and performance.
Magna-Cut-Plus Wire Drills Jobber Length 135*
Part # SIZEFLUTE
LENGTHLGTH
341-131341-132341-133341-134341-135341-136341-137341-138341-139341-140341-141341-142341-143341-144341-145341-146341-147341-148341-149341-150341-151341-152341-153341-154341-155341-156341-157341-158341-159341-160
313233343536373839404142434445464748495051525354555657585960
1-5/81-5/81-1/21-1/21-1/21-7/161-7/161-7/161-3/81-3/81-3/81-1/41-1/41-1/81-1/81-1/8
11111
7/87/87/87/83/43/4
11/1611/1611/16
2-3/42-3/42-5/82-5/82-5/82-1/22-1/22-1/22-3/82-3/82-3/82-1/42-1/42-1/42-1/42-1/4222221-7/81-7/81-7/81-7/81-3/41-3/41-5/81-5/81-5/8
Part # SIZEFLUTE
LENGTHLGTH
341-101341-102341-103341-104341-105341-106341-107341-108341-109341-110341-111341-112341-113341-114341-115341-116341-117341-118341-119341-120341-121341-122341-123341-124341-125341-126341-127341-128341-129341-130
123456789101112131415161718192021222324252627282930
2-5/82-5/82-1/22-1/22-1/22-1/22-7/162-7/162-7/162-7/162-5/162-5/162-5/162-3/162-3/162-3/162-3/162-1/82-1/82-1/82-1/8
222
1-7/81-7/81-7/81-3/41-3/41-5/8
3-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-7/83-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/23-1/2
www.cfisgroup.com Phone: 614-332-7464 6
Cutting ToolsMagna-Cut-Plus Wire Drills Jobber Length 135*
Part # SIZEFLUTELENGT
H
OVERALL
LENGTH341-300341-301341-302341-303341-304341-305341-306341-307341-308341-309341-310341-311341-312341-313341-314341-315341-316341-317341-318341-319341-320341-321341-322341-323341-324341-325
ABCDEFGHIJKLMNOPQRSTUVWXYZ
2-5/82-3/42-3/42-3/42-3/42-7/82-7/82-7/82-7/82-7/8
2-15/162-15/163-1/163-1/163-1/163-5/163-7/163-7/163-1/23-1/23-5/83-5/83-3/43-3/43-7/83-7/8
3-7/844444-1/84-1/84-1/84-1/84-1/84-1/44-1/44-3/84-3/84-3/84-5/84-3/44-3/44-7/84-7/8555-1/85-1/85-1/45-1/4
This 135* point, high speed steel drill performs well in a wide variety of ferrous metal drilling application.The black surface treatment prevents chip welding and increases abrasion resistance.
Part #DRILLDIAM.
OVERALL
LENGTH
FLUTELENGT
H341-910341-914341-918341-922341-926341-930
3/161/4
5/163/8
7/161/2
12”
12”
12”
12”
12”
12”
2-1/42-1/23-1/83-3/44”
4-1/2
Aircraft Ext Drills
Part #DRILLDIAM.
OVERALL
LENGTH
LENGTHOF
TWIST342-130342-140342-150342-160
1/85/323/161/4
1-7/82-1/162-3/162-1/2
7/811-1/81-3/8
Stubby Twin End Drills
Super heavy duty 135° split point eliminates center punching. Excellent for use on sheet metal.Expanded web provides superior strength and extended tool life.Premium alloy provides exceptional wear resistance and longer life.Finish: Surface - Ferro Gold, Flute - Ferro Gold.Made in the U.S.A.
EXTENDED FLUTE DESIGN - Provide maximum efficiency for quick drilling of 12" deep holes. SELF-CENTERING SPLIT POINT - 135°
split point provides a fast initial bite, and eliminates walking and wandering for precise hole positioning.SUPERIOR CONSTRUCTION - Premium alloy with ferro-gold surface treatment provides reduced friction and long tool life.VERSATILE - Excellent for drilling in hard to reach places, deep hole drilling and more.MADE IN THE U.S.A.
www.cfisgroup.com Phone: 614-332-7464 7
Cutting Tools
Special Hi-Molybdenum tool steel. 135° split point for fast penetration and accurate starting without center punch. Precision ground point, flute, body, clearance, and drill diameter for the ultimate in accuracy and performance. Body and clearance are gold surface treated for maximum lubricity. Space age nitro-carburized steel withstands substantially higher drilling temperatures while maintaining sharpness. Recommended for use in work hardening grades of stainless steel and other hard metal.
S & D Magna-Cut-Plus DrillsSilver & Deming 135*
Part #DRILLDIAM.
shank OVERALL
342-224342-226342-228342-230342-232342-233342-234342-235342-236342-238342-240342-242342-243342-244342-245342-246342-248342-250342-252342-253342-254342-255342-256342-258342-259342-260342-262342-264342-265342-266342-267342-269342-272342-275342-277342-280342-286342-289
33/6417/3235/649/1637/6419/3239/645/841/6421/3243/6411/1645/6423/3247/643/449/6425/3251/6413/1653/6427/3255/647/857/6429/3259/6415/1661/6431/3263/641”
1-1/161-1/81-5/321-3/161-1/41-1/2
1/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/21/2
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
6”
Part #DRILLDIAM.
DECIM
OVERALL
344-000344-001344-002344-003344-004344-005344-006344-007344-008344-009344-010344-011344-012344-013344-014344-015344-016344-017344-018344-019344-020344-021344-022344-023344-024344-025344-026344-027344-028
1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2
.0625
.0781
.0938
.1094
.1250
.1406
.1562
.1719
.1875
.2031
.2188
.2344
.2500
.2656
.2812
.2969
.3125
.3281
.3438
.3594
.3750
.3906
.4062
.4219
.4375
.4531
.4688
.4844
.5000
1-7/822-1/42-5/82-3/42-7/83-1/83-1/43-1/23-5/83-3/43-7/844-1/84-1/44-3/84-1/24-5/84-3/44-7/855-1/85-1/45-3/85-1/25-5/85-3/45-7/86
Superior Cobalt High Speed Steel - DIN 338
Gold surface treated for maximum lubricity. Heavy duty construction, 135°
split point, no center punch needed - will not walk. Gyrodial Torsion flute and land construction yields exceptional performance in deep hole drilling applications. Recommended for a wide range of steels, castings and other hard metal drilling applications.
Magna-Cut-Plus Colbalt DrillsMechanic’s length 135*
www.cfisgroup.com Phone: 614-332-7464 8
Cutting Tools
Part # SIZESHANK
SIZEOVERALLLENGTH
345-012345-014345-018345-024345-030345-034345-036
7/161/25/83/47/81”
1-1/16
7/161/21/21/21/21/21/2
5-3/85-7/86-1/27777
DRILLS TRUCK FRAMES IN MINUTES INSTEAD OF HOURS
Reduces time, drill breakage, extreme pressure required on large diameter drills.Reamers start using a small pilot hole.
Premium Rapid Reamer
Part # SIZE QTY
345-050 8 PC SET Ea
Hole Hog Set
Part # SIZE DRILL SIZE QTY
345-060345-064345-066345-068345-070345-072
3/81/2
9/165/8
11/163/4
1/4”
5/16”
3/8”
25/64”
7/16”
15/32”
EaEaEaEaEaEa
Hole Hog Reamer
4-Flute Core Drill - Super Premium 1/2" Shank - 3 Flats on Shank Special Hi-Molybdenum tool steel, gold surface treated body and clearance for maximum lubricity. Close tolerance construction Exclusively designed for enlarging existing holes. These core drills may replace tapered reamers in many applications
Carbide Tipped Drills
Solid Carbide Straight FluteExcellent for removing broken screw extractors, taps anddrill bits. For use in extremely hard and difficult to machine materials.
Hard Steel Carbide tipped, straight fluteThese drills are made for use in drilling hardened steel inthe range of 48 to 65 Rockwell C.
Part # SIZEOVERALLLENGTH QTY
344-224344-226344-228344-229344-230344-232344-236344-240344-244344-248
1/85/323/167/329/321/45/163/87/161/2
1-7/82-1/162-3/162-3/8
2-11/162-13/16
33-1/8
3-7/163-3/4
EaEaEaEaEaEaEaEaEaEa
Part # SIZEOVERALLLENGTH QTY
344-260344-264344-265344-266344-267344-270344-276344-282344-284344-286
1/83/165/327/329/321/45/163/87/161/2
2-3/43”
3”
4”
4”
6”
6”
6”
6”
6”
EaEaEaEaEaEaEaEaEaEa
Solid Carbide Drills
Drill and Reamer3/8” , 1/2”, 5/8”, 3/4
www.cfisgroup.com Phone: 614-332-7464 9
Cutting Tools
STEP DRILLS ULTRA BIT™ MULTI-DIAMETERType 78-AG Gold Oxide, 3-flats on Shank
SPECIAL AXIAL and RADIAL FLUTE DESIGN - Increases work piece penetration.
DUAL FLUTE CONSTRUCTION – Drills clean accurate holes in thin materials, quickly and easily.
MULTI-DIAMETER DRILLS - One drill can produce up to 13 different hole sizes.
DOUBLE FLUTED DESIGN - Drills clean, accurate, burr-free holes in thin materials quickly and easily.
HIGH MOLY ALLOY STEEL - Special high speed alloy construction provides superior wear resistance for extended tool life.
GOLD SURFACE TREATMENT - Provides superior surface lubricity for fast and smooth cutting action.
3 FLATS ON SHANKS - Flatted shanks eliminate chuck slippage.
VERSATILE - Can be used on portable drills, drill presses and lathes.
MULTI-MATERIAL - Stainless steel, steel, aluminum, brass, other metals, rigid plastics, laminates and most material with a thickness equal to or less than the step depth of the drill.MADE IN THE U.S.A.
Part# Range Qty.
345-110345-115345-120345-125345-130345-135345-140345-145345-150345-155
1/8 – 1/23/16 – 1/21/4 – 3/49/16 – 1”
7/8 – 1-1/81/4 – 7/8
1/4 – 1-1/81/4 – 1-3/87/8 – 1-1/8
7/8 – 1-7/32
EAEAEAEAEAEAEAEAEAEA
Part# Range Qty
345-080345-082345-084345-086
1/8–1/2, 3/16–1/2, 1/4–3/41/8–1/2, 3/16–1/2, 3/16–3/81/8–1/2, 3/16–1/2, 9/16–1”
1/8–1/2, 3/16–1/2, 7/8–1-1/8
SETSETSETSET
3 3 –– Piece Set
www.cfisgroup.com Phone: 614-332-7464 10
Cutting Tools
Part #DRILLDIAM.
OVERALLLENGTH
SHANKDIAMETER
346-210346-215346-220346-225346-230346-235346-240346-245346-280
1/83/161/45/163/81/25/83/41
3”
3-1/2”
4”
4”
4”
6”
6”
6”
6”
1/83/161/41/41/43/83/81/21/2
Carbide Masonry Drills
Drill Press Part # RANGE QTY
346-520346-525346-524
1/4 X 1”
1/4 X 21/4 X 2 (7/16)
EaEaEa
Knock-Out Pin
Spiral-Broach Drill Press
Fastest, easiest way to drill holes in tile, brick, cement, concrete, etc.Carbide tips ensure that drill stays sharper longer.Wide spiral flute assures dust removal from cutting zone.Use for installing expansion anchors, plumbing, heating, air conditioning, etc.Suitable for hammer drills.Made in the U.S.A.
Part # RANGE QTY
346-530346-535345-540346-545346-550346-555346-560346-565346-570346-575346-580
1/2 X 1”
9/16 X 1”
5/8 X 1”
11/16 X 1”
3/4 X 1”
13/16 X 1”
7/8 X 1”
15/16 X 1”
1” X 1”
1-1/16 X 11-1/8 X 1
EaEaEaEaEaEaEaEaEaEaEa
1” Long
Spiral-Broach Drills
Part # RANGE QTY
346-720346-725345-730346-735346-740346-745346-750346-755346-760346-765346-770346-775346-780346-785346-790346-795346-800346-820
1/2 X 2”
9/16 X 2”
5/8 X 2”
11/16 X 2”
3/4 X 2”
13/16 X 2”
7/8 X 2”
15/16 X 2”
1” X 2”
1-1/16 X 2”
1-1/8 X 2”
1-3/16 X 2”
1-1/4 X 2”
1-5/16 X 2”
1-3/8 X 2”
1-7/16 X 2”
1-1/2 X 2”
2-1/16 X 2”
EaEaEaEaEaEaEaEaEaEaEaEaEaEaEaEaEaEa
2” Long2” Long
www.cfisgroup.com Phone: 614-332-7464 11
Cutting ToolsPART NO. 347-030
25 Piece Magnum Super Premium SetSpiral Point Plug Taps & Hex Dies
• Set contains: Type 20-AG and 27-AG• HSS spiral point taps & HSS hex dies
sizes: 1/4-20, 1/4-28,• 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14,
7/16-20, 1/2-13 &• 1/2-20.• HSS pipe tap and hex die size: 1/8-27
NPT.• T-Handle tap wrench: 3/16"-1/2".• Die stock & Screw pitch gauge.• Supplied in sturdy plastic case.
PART NO. 347-040
24 Piece Magnum Super Premium Set -Metric Spiral Point Taps & Hex Dies
Set contains: Type 21-AG and 27-AG• HSS spiral point taps & HSS hex dies
sizes: 3.0-.50, 3.5-.60,• 4.0-.70, 5.0-.80 6.0-1.00, 8.0-1.25, 10.0-
1.50 & 12.0-1.75.• HSS pipe tap and hex die size: 1/8-27 NPT.• T-Handle tap wrenches: 0 - 1/4" & 3/16"-
1/2".• Straight handle tap wrench: #4 - 1/2".• Die stock & Screw metric pitch gauge.• Supplied in sturdy plastic case.
PART NO. 347-060.
58 Piece Magnum Super Premium SetStraight Flute Plug Taps & Hex Dies
• Set contains: Type 24-AG and 27-AG• HSS straight flute taps & HSS hex dies
sizes: 6-32, 8-32, 10-24,• 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18,
5/16-24, 3/8-16, 3/8-24,• 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12,
9/16-18, 5/8-11,• 5/8-18, 3/4-10, 3/4-16, 1/8-27NPT & 1/4-
18NPT.• Straight handle tap wrenches: #4-1/2" &
1/4"-3/4".• Die stocks: MED R/H & 1"R/H.• T-handle tap wrench: 0-1/4".• Screw pitch gauge.• Screw driver & Spiral flute • Extractors sizes: Ex 1 thru Ex 5
Norsman 35173
Norsman 61680
Norsman 35170
www.cfisgroup.com Phone: 614-332-7464 12
Cutting ToolsPART NO. 347-080
40 Piece Magnum Super Premium SetSpiral Point Plug Taps & Hex Dies
• Set contains: Type 20-AG and 27-AG• HSS spiral point taps & HSS hex dies
sizes: 4-40, 6-32, 8-32,• 10-24, 10-32, 12-24,1/4-20, 1/4-28, 5/16-
18, 5/16-24, 3/8-16,• 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20.• HSS pipe tap and hex die size: 1/8-27
NPT.• T-Handle tap wrenches: 0 - 1/4" & 3/16"-
1/2".• Straight handle tap wrench: #4 - 1/2".• Die stock, Screw pitch gauge • & Screw driver.• Supplied in sturdy red plastic case.
PART NO. 347-070
40 Piece Magnum Super Premium SetStraight Flute Plug Taps & Hex Dies
• Set contains: Type 24-AG and 27-AG• HSS straight flute taps & HSS hex dies
sizes: 4-40, 6-32, 8-32,• 10-24, 10-32, 12-24, 1/4-20,1/4-28, 5/16-
18, 5/16-24, 3/8-16,• 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20.• HSS pipe tap and hex die size: 1/8-27
NPT.• T-Handle tap wrenches: 0 - 1/4" & 3/16"-
1/2".• Straight handle tap wrench: #4 - 1/2".• Die stock, Screw pitch gauge • & Screw driver.• Supplied in sturdy red plastic case.
PART N0. 347-075
37 Piece Magnum High Carbon Steel Set Metric Set
Spiral Point Plug Taps & Hex DiesTaps 1 Of Each3mm X 0.50,3mmx 0.60, 4mm X 0.70, 4mm X 0.75, 5mmx 0.80, 5mm X 0.90, 6mm X 1.00, 7mm X 1.00, 8mmx 1.25, 9mm X 1.00, 9mm X 1.25, 10mmx 1.25, 10mmx 1.50, 11mmx 1.50, 12mmx 1.50, 12mmx 1.75, 1/8-27 NPT Pipe T-Handle Tap Wrench 1 Of Each0 To 1/4, 3/16 To 1/2 Die Stock
Hex Dies3mmx 0.50, 3mmx 0.60, 4mm X 0.70, 4mm X 0.75, 5mm X 0.80, 5mmx 0.90, 6mm X 1.00, 7mm X 1.00, 9mm X 1.00, 9mm X 1.25, 10mmx 1.25, 10mmx 1.50, 11mmx 1.50, 12mmx 1.50, 12mmx 1.75,1/8-27 NPT
Norsman 35171Norsman 35181
Norsman 50150
www.cfisgroup.com Phone: 614-332-7464 13
Cutting ToolsT-Type Tap Wrench
Part #FITS
STANDARD
TAPS
FITS MACHINESCREW
TAPS347-202347-204
1/16 TO 1/47/32 TO 1/2
#0 TO 14312 to 14
Part # SIZE347-347347-348347-349
1/4-20 T1/4-20 P1/4-20 B
347-350347-351347-352
5/16-18 T5/16 18-P5/16-18 B
347-353347-354347-355
3/8-16 T3/8-16 P3/8-16 B
347-356347-357347-358
7/16-14 T7/16-14 P7/16-14 B
347-359347-360347-361
1/2-13 T1/2-13 P1/2-13 B
347-362347-363347-364
9/16-12 T9/16-12 P9/16-12 B
347-365347-366347-367
5/8-11 T5/8-11 P5/8-11 B
347-368347-369347-370
3/4-10 T3/4-10 P3/4-10 B
347-371347-374
7/8-9 T1-8 T
Part # SIZE347-313347-314347-315
6-40 T6-40 P6-40 B
347-319347-320347-321
8-36 T8-36 P8-36 B
347-324347-325347-326
12-28 T12-28 P12-28 B
347-330347-331347-332
6-32 T6-32 P6-32 B
Part # SIZE347-333347-334347-335
8-32 T8-32 P8-32 B
347-336347-338347-339
10-24 T10-24 P10-24 B
347-340347-341347-342
10-32 T10-32 P10-32 B
347-343347-344347-345
12-24 T12-24 P12-24 B
Magna-Tap-Plus Hand Taps
Magna-Tap-Plus Hand Taps
www.cfisgroup.com Phone: 614-332-7464 14
Cutting Tools
Part # SIZE347-447347-448347-449
1/4-28 T1/4-28 P1/4-28 B
347-450347-451347-452
5/16-24 T5/16-24 P5/16-24 B
347-453347-454347-455
3/8-24 T3/8 24 P3/8-24 B
347-456347-457347-458
7/16-20 T7/16-20 P7/16-20 B
347-459347-460347-461
1/2-20 T1/2-20 P1/2-20 B
347-462347-463347-464
9/16-18 T9/16-18 P9/16-18 B
347-465347-466347-467
5/8-18 T5/8-18 P5/8-18 B
347-468347-469347-470
3/4-16 T3/4-16 P3/4-16 B
Magna-Tap-Plus 3 Piece Hand Tap Sets
Part # SIZE347-526347-528347-530
10-2410-3212-24
Part # SIZE347-532347-534347-536347-538347-540347-542347-544347-546
1/4-205/16-183/8-16
7/16-141/2-13
9/16-125/8-113/4-10
Part # SIZE347-632347-634347-636347-638347-640347-642347-644347-646
1/4-285/16-243/8-24
7/16-201/2-20
9/16-185/8-183/4-16
INCLUDES1 TAPER1 PLUG1 BOTTOM
Magna-Tap-Plus Hand Taps
Part # SIZE347-720347-722347-724347-726347-728347-730
1/81/43/81/23/41
Magna-Tap-Plus Hand Pipe Taps
www.cfisgroup.com Phone: 614-332-7464 15
Cutting ToolsMagna-Tap-Plus Metric Hand Taps - Plug
Part # SIZE347-754347-755347-756
4 - .70 T4 - .70 P4 - .70 B
347-757347-758347-759
5 - .80 T5 - .80 P5 - .80 B
347-760347-761347-762
6 – 1.00 T6 – 1.00 P6 – 1.00 B
347-763347-764347-765
7 – 1.00 T7 – 1.00 P7 – 1.00 B
347-766347-767347-768
8 – 1.00 T8 – 1.00 P8 – 1.00 B
347-769347-770347-771
8 – 1.25 T8 – 1.25 P8 – 1.25 B
347-772347-773
9 – 1.25 P9 – 1.00 P
347-774347-775347-776
10 – 1.25 T10 – 1.25 P10 – 1.25 B
347-777347-778347-779
10 – 1.50 T10 – 1.50 P10 – 1.50 B
347-780 10 – 1.00 P
347-784347-785347-786
12 – 1.25 T12 – 1.25 P12 – 1.25 B
347-787347-788347-789
12 – 1.50 T12 – 1.50 P12 – 1.50 B
347-790347-791347-792
12 – 1.75 T12 – 1.75 P12 – 1.75 B
347-793 14 – 1.25 P347-794347-795347-796
14 – 1.50 T14 – 1.50 P14 – 1.50 B
347-797347-798347-799
14 – 2.00 T14 – 2.00 P14 – 2.00 B
347-800347-801347-802
16 – 1.50 T16 – 1.50 P16 – 1.50 B
347-803347-804347-805
16 – 2.00 T16 – 2.00 P16 – 2.00 B
347-806347-807347-808
18 – 1.50 T18 – 1.50 P18 – 1.50 B
347-808 18 – 2.00 P347-810347-811347-812
18 – 2.50 T18 – 2.50 P18 – 2.50 B
347-813347-814347-815
20 – 1.50 T20 – 1.50 P20 – 1.50 B
347-816347-817347-818
20 – 2.50 T20 – 2.50 P20 – 2.50 B
347-819347-820347-821
22 – 1.50 T22 – 1.50 P22 – 1.50 B
347-822347-823347-824
22 – 2.50 T22 – 2.50 P22 – 2.50 B
347-825347-826347-827
24 – 2.00 T24 – 2.00 P24 – 2.00 B
347-828347-832347-833
24 – 3.00 T24 – 3.00 P24 – 3.00 B
www.cfisgroup.com Phone: 614-332-7464 16
Cutting Tools
Magna-Cut-Plus Hex Dies
Part # SIZE
WIDTHACROSS
FLAT QTY348-803348-804347-805348-806348-820348-822348-824348-826348-828348-830348-832348-834348-836
6-328-32
10-2410-321/4-205/16-183/8-167/16-141/2-139/16-12
11/16 - 115/8-113/4-10
1”
1”
1”
1”
1”
1”
1”
1”
1"1-7/16”
1-7/16”
1-7/16”
1-7/16”
EaEaEaEaEaEaEaEaEaEaEaEaEa
Part # SIZE
WIDTHACRO
SSFLAT
QTY
348-860348-862348-864348-866348-868348-870348-872348-874348-876348-878
1/4-285/16-243/8-24
7/16-201/2-20
9/16-1811/16 - 16
5/8-183/4-167/8-14
1”
1”
1”
1”
1”
1-7/16”
1-7/16”
1-7/16”
1-7/16”
1-7/16”
EaEaEaEaEaEaEaEaEaEa
Hex Die Holder
Part #FITS STANDARD
TAPSFITS MACHINESCREW TAPS QTY
347-800347-801
6-32 TO 1/29/16 TO 3/4
UP TO 1”
UP TO 1-1/2EaEa
Magna-Cut-Plus Hex Dies
Screw and Pipe Extractor
Part # #TO
REMOVE L.DRILLSIZE
353-001353-002353-003353-004353-005353-007
123457
3/32 TO 5/325/32 TO 7/327/32 TO 9/32
9/32 TO 3/8 (1/8 pipe3/8 TO 5/8 (1/4 pipe)5/8 TO 7/8 (3/8 pipe)
22-1/2333-3/83-3/4
3/321/83/161/417/6413/32
Magna-Cut-Plus Left Hand Drills
Part #DRILLDIAM.
DECIMAL
353-600353-601353-602353-603353-604353-005353-606353-007353-608353-609353-610353-611353-612353-613353-614353-615353-616353-617353-618353-619353-620353-621353-622353-623353-624353-625353-626353-627353-628
1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2
.0625
.0781
.0938
.1094
.1250
.1406
.1562
.1719
.1875
.2031
.2188
.2344
.2500
.2656
.2812
.2969
.3125
.3281
.3438
.3594
.3750
.3906
.4062
.4219
.4375
.4531
.4688
.4844
.5000
www.cfisgroup.com Phone: 614-332-7464 17
Cutting Tools
67 Piece Assortment Super Premium Spiral Point Taps & Jobber
Length Drill Dispenser
Part# Desc. Qty
347-010 10-Piece Set EA
Product Description67-SP Assortment contains:Super Premium jobber drill sizes:6 each #36, 29, 25, 213 each #7, F & 5/162 each #3, I, Q, U, 25/64, 27/64 & 29/64
Super Premium spiral point plug tap sizes:3 each 1/4-202 each 6-32, 8-32, 10-24, 10-32
1 each 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20Includes 3 drawer stocking cabinet.
PremiumLeft Hand Drill Sets
Part# Desc. Qty
353-580 15-Piece Set3/32 – 1/2
EA
Part# Desc. Qty
353-585 27-Piece Set3/32 – 1/2
EA
www.cfisgroup.com Phone: 614-332-7464 18
Cutting Tools10 pc.
Screw & Pipe ExtractorsWith Left-hand drills
18 pc. CFIS Magna-Cut PlusTap & Drill Set
Part# Desc. Qty
353-000 10-Piece Set EA
Fast and easy stud removal
Left-hand spiral drills often eliminate the need for use of extractor.
Drill loosens bolt stud with counter clockwise rotation.
135˚ split point for fast penetration and
accurate starting without center punch.
Most broken studs are work hardened during the breaking process.
• A NECESSITY FOR ANYONE THAT USES TAPS - Contains tap and matching drill size needed for use with taps.
• AVOIDS COSTLY DOWNTIME - A drill that is even 3/1000ths too small can result in broken taps. A drill bit that is oversize can result in weak threads that are prone to failure.
• Both can result in costly equipment downtime. Selecting the correct drill bit will create stronger threads and avoid breaking the tap in use.
Part# Desc. Qty
347-120347-122
USS StandardsMetric Sizes
EaEa
Tap & Drill Set
www.cfisgroup.com Phone: 614-332-7464 19
Cutting Tools
Part# Range Qty.
354-250354-251354-252354-253354-254354-255
5-Piece SetNo 1No 2No 3No 5No 5
EAEAEAEAEAEA
Removes broken studs, bolts and screws without damaging surrounding threads.
Double-edged tapered flute design cuts deep grooves for a secure grip in broken fasteners.
Non-slipping dual edge construction allows extractors to securely "bite in" and remove both left and right hand fasteners.
Dual-edge extractors grab with either clockwise or counterclockwise rotation.
Hex shank allows used with socket wrenches and extensions, box wrenches, and open end wrenches.
Center-punch pin in the center point of the extractor increases drilling accuracy.
Manufactured from chrome vanadium alloy steel, heat treated and tempered for maximum durability.
www.cfisgroup.com Phone: 614-332-7464 20
Cutting Tools
• Remove broken taps and save the threads! Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts.
• The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. Our Tap Extractors will fit both NC and NF
Part # QTY354-500 Ea
3-Flute Tap Extractor Set
Part # QTY354-504 Ea
4-Flute Tap Extractor Set
Broke Tap Extractor Set
• You are assured that expensive machinery will not be damaged by makeshift methods of removing broken pipes and studs. Extractors work by pulling, rather than reaming, and are designed for strength, durability and easy handling.
• Extractors will save time, money and equipment in machine shops, manufacturing plants, industrial plants, rail and bus lines and countless other places where machine and equipment maintenance plays a key role in day-to-day operations.
• Pipe and Stud Extractors do the job quickly and easily, an important factor when time is critical. These extractors will save you time and money
Heavy Duty Pipe and Stud Extractor
Part # Size QTY354-550354-555
5 pc10 pc
EaEa
www.cfisgroup.com Phone: 614-332-7464 21
Cutting Tools
Part # ITEM QTY355-025355-027355-029355-035355-037355-039
1/4 X 5/83/8 X 3/41/2 X 13/4 X 17/8 X 11” X 1”
EaEaEaEaEaEa
Part # ITEM QTY355-046355-048355-050355-052355-054355-056355-058
1/8 X 7/323/16 X 9/32
1/4 X 3/83/8 X 5/81/2 X 7/85/8 X 1
3/4 X 3/4
EaEaEaEaEaEaEa
Part # ITEM QTY355-070355-072355-074
1/4 X 5/83/8 X 3/41/2 X 1
EaEaEa
Part # ITEM QTY355-084355-085355-087355-089
3/16 X 7/321/4 X 7/323/8 X 5/161/2 X 7/16
EaEaEaEa
Part # ITEM QTY355-120355-125355-130355-135355-139
1/4 X 5/83/8 X 3/41/2 X 15/8 X 13/4 X 1
EaEaEaEaEa
Part # ITEM QTY355-150355-155355-160355-162355-164
1/4 X 3/83/8 X 5/81/2 X 7/85/8 X 13/4 X 1
EaEaEaEaEa
Part # ITEM QTY355-180355-185355-190355-195
1/4 X 5/83/8 X 3/41/2 X 15/8 X 1
EaEaEaEa
Double Cut The most popular burr for ferrous applications.The flutes are ground in both the left and right hand directions, offering better operator control and rapid stock removal in harder materials.The double cut geometry reduces the size of the chips and can be used at slower than normal speeds.
Aluma Cut Designed for used on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials.The burrs are designed with a high flute finish for easy chip flow and fast stock removal and excellent work piece finish.
Premium Carbide Burrs Premium Carbide Burrs
www.cfisgroup.com Phone: 614-332-7464 22
Cutting ToolsPremium Carbide Burrs Premium Carbide Burrs
Part # 355-002 (19669)
Part # 355-004 (19629)
Part # 355-006 (19619)
Part # 355-008 (19649)
Part # 355-012 (19639)
Part # 355-010 (19609)
www.cfisgroup.com Phone: 614-332-7464 23
Cutting ToolsAir Saw Blades
Part # TEETH
LENGTH
QTY RECOMENDED USES
356-490 24 3" 10 METAL CUT
356-494 32 3" 10 METAL CUT
Part # TEETH LENGTH QTY RECOMENDED USES
356-510 12 3" 10 METAL CUT
356-514 18 3” 10 METAL CUT
356-518 24 3" 10 METAL CUT
Features & Benefits: • Fine teeth for cutting thin metal• Used mostly for auto body, muffler shops,
or other metal fabricating shopsApplications Thin sheet metal, automotive, muffler shops, metal fabricating
• Features & Benefits: • For cutting ferrous and non-ferrous metals.• Milled and set teeth, better clearance while
cutting metal• Larger tooth (6, 8 tip) are more efficient
cutting in hard board, wood and other wood composites.
• Applications Machinable metal, wood, nail-embedded wood, composites, plastic, rubber
Bosch Blades
Saber Blades
Part # TEETH
LENGTH
QTY
RECOMENDED USES
356-524 24 3-1/8" 10 1/16" STEEL AND UNDER, THIN
WALL TUBING, FORMICA
356-528 14 3-1/8" 10 1/8" TO 1/4" STEEL,
NONFERROUS ALUMINMUM, FIBERGLASS,
PLASTIC
Part # TEETH
LENGTH
QTY
RECOMENDED USES
356-532 24 1-3/4" 10 THIN SHEET STEEL, THIN
WALL TUBING, AND SCROLL
WORK
356-536 18 3" 10 1/16" TO 1/8" STEEL, CONDUIT, PLASTIC, TUBING
ETC.
• Features & Benefits: • For cutting ferrous and non-ferrous metals.• Milled and set teeth, better clearance while
cutting metal• Larger tooth (6, 8 tip) are more efficient
cutting in hard board, wood and other wood composites.
Applications Machinable metal, wood, nail-embedded wood, composites, plastic, rubber
Part # TEETH
LENGTH
QTY
RECOMENDED USES
356-550 24 3" 10 THIN SHEET METAL, SCROLL
CUTTING
356-554 14 3-5/8" 10 HEAVY GUAGE METAL,
FIBERGLASS, MASONITE,
SCROLL CUTTING
www.cfisgroup.com Phone: 614-332-7464 24
Cutting ToolsSaber Blades
Part # TEETH LENGTH QTY
RECOMENDED USES
356-562 18 6" 5 HEAVY GUAGE SHEET METAL, CONDUIT PIPE, TUBING, THIN FIBERGLASS
356-570356-572356-574
14/1018
14/10
8“
9”
12"
555
HEAVY GUAGE METAL,
COMPOSIT, MASONITE, WOOD ETC
356-576356-578
1814
12”
6"55
FOR METALT HEAVIER THAN
1/8", BAR STOCK, ANGLES, ETC, ALSO RUBBER,
MASONITE, FIBERGLASS,
ETC.
Part # TEETH LENGTH QTY
356-588 6 6" 5
Part # TEETH LENGTH QTY
356-592356-596
66
9"12"
55
• Features & Benefits Available in .035" thickness for flexibility in tight spaces and in .050" thickness for increased rigidity and heavier feed pressure.
• Straight and variable tooth pitch which provide speed in cut and easier feed in wood.
• Reinforced tooth design with compound relief provides high impact resistance.
• More aggressive cutting with positive rake on .050" x 6 TPI blades.
• Bi-metal construction for long cutting life and heat and wear resistant.
• Tapered blade body best for plunge cutting.
FOR WOOD AND NAIL EMBED WOODS, ALL COMPOSTION MATERIALS, NON-FERROUS METALS
GENERAL ROUGHING-IN WORK IN WOOD AND NAIL-EMBEDED WOODS. FAST CUTTING
Fire and Rescue Saber Blades
• Features & Benefits Available in .062" thickness provides minimum deflection for more stable cutting in wider cuts.
• Available in 7/8" blade for increased rigidity and heavier feed pressure.
• Straight tooth pitch provides quick and more efficient cutting in multiple wall applications.
• Optimized set pattern to reduce vibration, operator fatigue, and chance for blade binding in cut.
• Bi-metal construction for long cutting life and heat and wear resistant.
Applications Fire & rescue extrication, demolition
Part # TEETH LENGTH QTY
356-702356-710
1014
6" 55
356-704356-712
1014
9” 55
356-706356-714
1014
12” 22
www.cfisgroup.com Phone: 614-332-7464 25
Cutting Tools
Part # QTY356-730 Ea
Part # SIZE QTY356-755 12" X 24T Ea
Bi-Metal Hole Saw Maintenance Kit13 Pieces Includes: Hole Saws: 3/4, 7/8, 1 1/8, 1 3/8, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2" Arbors: M24K, M44, M45P, and 12" extension
Bi-Metal Hole Saw Maintenance Kit 18 Pieces Includes: 20, 25 mm, 1.1/8", 1.1/2", 1.3/4", 2", 2.1/4", 2.1/2", 3", 3.1/4", 3.5/8", 3.3/4", 4.1/4", 4.1/2".Also M24K, M44,
M45P arbors and 12" extension.
Part # QTY358-102 Ea
Part # QTY
358-101 Ea
Industrial Hole Saw Kit
Hacksaw Blades
Hacksaw Frame
Includes25 pc. Professional Tradesman Kit
SpecificationsCover a broad range of common industrial maintenance, plumbing and electrical jobs on pipe and conduit through 4-1/2˝(114mm).
Saws (1 each): 3/4˝(19mm), 7/8˝(22mm),
1˝(25mm), 1-1/8˝(29mm), 1-3/8˝(35mm), 1-1/2˝(38mm), 1-3/4˝(44mm), 2˝(51mm), 2-1/8˝(54mm), 2-1/4˝(57mm), 2-1/2˝(64mm),
2-11/16˝(68mm), 3˝(76mm), 3-1/4˝(83mm),
3-3/8˝(86mm), 3-5/8˝(92mm), 3-3/4˝(95mm),
4-1/8˝(105mm), 4-1/2˝(114mm),
4-3/4˝(121mm).
Arbors (1 each): MA34, MA45PS. Pilot Drills (2 each): MAPD301. Extension (1): 12˝
Part # QTY358-104 Ea
Profesional Hole Saw Kit
www.cfisgroup.com Phone: 614-332-7464 26
Cutting Tools
Part # SIZE FIT SAWS
358-122358-125358-127
1/4” ROUND
7/16 HEX7/16 HEX
9/16 – 1-3/169/16 – 1-3/16
1-1/4 – 6”
358-105358-110
1/4 x 3-1/16 DRILL1/4 x 4-5/16 DRILL
EaEa
Part # SIZE358-136358-138358-140358-144358-146358-148358-149358-152358-156358-160358-164358-168358-172358-176358-180358-184358-186
5/811/163/47/8
15/161
1-1/161-1/81-1/4
1-5/161-3/81-1/21-5/81-3/41-7/8
22-1/16
Part # SIZE358-188358-192358-196358-200358-201358-204358-206358-208358-210358-211358-212358-214358-216358-218358-220358-224358-226358-230
2-1/82-1/42-3/82-1/22-5/82-3/42-7/8
33-1/83-1/43-1/23-3/4
44-1/84-1/24-3/4
55-1/4
FEATURES & BENEFITSPATENT PENDING TOOTH SET DESIGN - Optimized to Remove Material Faster
NEW CAP - Reduces Runout and Vibration
PREMIUM M42 HIGH SPEED STEEL CUTTING EDGE, 8% COBALT - Over 2X the Life of Our AV Model
CUTTING DEPTH - 1-15/16" (49,2 mm)HEAVY DUTY .050 SIDE WALL - For Greater Stability
NEW SIDE SLOT - Increased Leverage for Faster, Easier Slug RemovalNEW EXTERIOR RED COATING -Reduces Side Wall Friction for Efficient Cutting
www.cfisgroup.com Phone: 614-332-7464 27
Cutting Tools
Part # SIZE358-503358-504358-505
HC-4A ( 5/8, 3/4, 7/8, 1" )HC-4B ( 11/16, 13/16, 15/16, 1-1/16 )HC-5C ( 7/8, 1-1/8, 1-3/8, 1-3/4, 2" )
Type CHC-AG Cuts up to 3/16" — Thin Material
Type CHD-AG Cuts up to 1" — Thick MaterialPart # SIZE
358-506358-507358-508
HCD-4A ( 5/8, 3/4, 7/8, 1" )HCD-4B ( 11/16, 13/16, 15/16, 1-1/16 )HCD-5C ( 7/8, 1-1/8, 1-3/8, 1-3/4, 2" )
Compare 5/8” S & D 1/2 “ Shank Drill
against a 5/8” Carbide Tip Hole Cutter on
5/16” Frame Steel to demonstrate the
superior cutting performance and speed of the Carbide Tip. The results tell the story. After six exhausting minutes of drilling, the S&D drill had managed to penetrate the steel plate approximately 60% of the way. At this rate, the S&D drill would have needed over 10 minutes to complete the task.
The Carbide Tip Hole Cutter, however, powered through the Frame Steel completelyin just one minute and 18 seconds,
leaving a smooth, complete holeperfect for a 5/8” cap screw.
Carbide Tip Hole Cutter—the choice when time is money.
AG Cuts up to 3/16"
Thick Material
Time is Money
5/8” S&D 1/2”
Shank Drill
6:00
Rough,Incomplete
Hole
Carbide TipHole Cutter
1:18
Smooth,Complete
Hole
www.cfisgroup.com Phone: 614-332-7464 28
Cutting Tools
Part # SIZE358-547358-549358-552358-556358-560358-562358-563358-564358-556358-567358-568358-569358-570358-572358-580358-585358-606358-604358-608358-610358-614358-618358-622358-626
9/165/8
11/163/47/81”
1-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-5/8
2”
2-1/42-5/162-3/82-7/162-1/22-5/82-3/42-7/8
Carbide Tip Hole SawsCUTS TO 1”
HEAVY-DUTY HOLE MAKERS - cut sheet metal, steel, stainless steel, iron, cast iron, aluminum, copper, alloys, plate, pipe, tubing, FRP, and plastics.EXTREMELY FAST CUTTING - cuts up to 10 times faster than a drill bit*.EXTREMELY LONG LIFE - Lasts up to 10 times longer than heavy-duty drill bits, and 500 times longer than hole saws.CUTS MATERIALS UP TO 1" THICK -handles tough structural steel, heavy-duty truck frames, and other demanding applications.SELF-CENTERING PILOT DRILL - just place the cutter where you need it and begin drilling - no wandering on the work piece.ULTRA-HARD CARBIDE TEETH - provide extremely fast cutting and very long life.TOOL STEEL BODY & SHANK -extremely tough and breakage resistant.EASY-TO-CONTROL - even large diameter holes can be cut quickly and easily with a hand drill.SUPERIOR HOLE QUALITY - produces clean, burr-free, perfectly round holes.EASY-TO-USE - can be used in lighter, lower power tools than twist drills.AUTOMATIC SLUG EJECTION - ejects the cut slug when the hole is completed.FLATTED SHANKS - no slippage in the chuck.
TRUCK/TRAILER APPLICATIONS:2-3/8" cutter is ideal for 2" diameter lamps2-7/8" cutter is ideal for 7 way trailer plugs4-1/2" cutter is ideal for 4" diameter lamps
Part # SIZE358-747358-749358-752358-756358-760358-762358-763358-764358-756358-767358-768358-769358-770358-772358-780358-785358-806358-804358-808358-810358-814358-818358-822358-826
9/165/8
11/163/47/81”
1-1/161-1/8
1-3/161-1/4
1-5/161-3/8
1-7/161-1/21-5/8
2”
2-1/42-5/162-3/8
2-7/162-1/22-5/82-3/42-7/8
Carbide Tip Hole SawsCUTS TO 3/16”
www.cfisgroup.com Phone: 614-332-7464 29
Cutting Tools
RotacutRotacutCarbide Tipped Caaarrrrrbbbiidddddeeeee TTTTTTiippppppeeeeed
Hole Saws
RotaCut's are far superior to twist drills and hole saws. They cut 3x faster and last 10x longer, plus there's no comparison in quality. Use with hand held drills with a 3/8" or 1/2" chuck for holes in sheet metal, plate materials, and plastics up to 1/2" thick. Ideal for: Electrical, Piping, Conduit Work, Sheet metal Fabrication, Spot-weld Removal, Maintenance Installations, HVAC, PHCC, Automotive Aftermarket and many others...
Part # SIZE359-230359-232359-234359-236359-238359-240359-242
5/163/87/161/29/165/83/4
Includes: 11088 Arbor Assembly, Center Punch, extra Pilot, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 and case.
Includes: 11005 Arbor Assembly, Center Punch, extra Pilot, 7/8, 1, 1-1/8, 1-1/4, 1-3/8 and 1-1/2-inch, with a 1/2-inch depth of cut.
CFIS Part # 359-200 (Hougen 11075)
CFIS Part # 359-206 (Hougen 11078)
Part # SIZE359-250359-252359-254359-258359-262359-266
7/81”
1-1/81-1/41-3/81-1/2
www.cfisgroup.com Phone: 614-332-7464 30
AbrasivesColumbus Fleet Industrial Supply
Canton Fleet Industrial Supply
Canton First Aid & Safety
www.cfisgroup.com Phone: 614-332-7464 31
www.cfisgroup.com Phone: 614-332-7464 32
THE 3 MOST COMMON GRAINS
1.Ceramic Alumina – Ceramic abrasives provide the longest life & fastest cut rate of all coated
abrasives. They are the newest grain innovation and represent the ultimate in performance,
providing an aggressive, consistent cut under moderate to high pressure. Ceramic is usually red or
orange in color. Used primarily on metal applications.
2.Zirconia Alumina– Zirconia Alumina is commonly referred to as Zirc or Zirconium. Zirc is ideal
for coarse to medium grit applications on metal (best choice for abusive applications). Zirc is
usually green or blue in color. Works best under high pressure (which is required for the grain to
fracture exposing new sharp edges). It has large fracture planes and it self-sharpens as it cuts.
3.Aluminum Oxide– Aluminum Oxide is the most common & least expensive. Good starting point
for most metal and wood applications. Aluminum Oxide is usually brown or reddish in color, but
can be blue, green or yellow (which usually indicates the presence of a grinding aid/lubricant). It is
durable with tough cutting edges, but it dulls during use.
Zirc vs. Ceramic1.Both grains are considered “Hi-Performance”. Both will remove metal faster and last longer than
all aluminum oxide or silicon carbide products. These Hi-Performance grains have the ability to
constantly resharpen as they wear, providing fast cutting action through their usable life. Used
primarily on metal applications
2.Zirc or Zirconium. They are ideal for coarse to medium grit applications on metal (best choice for
abusive applications).
• Works best under high pressure (which is required for the grain to fracture exposing new sharp
edges).
• Zirc was the first innovation in self-sharpening grain technology. Zirc grain has “large fracture
planes”, which means a large portion of the grains flakes away as they resharpen, limiting the
number of times the grain can resharpen itself.
Ceramic abrasives, Are the newest innovation in grain technology. They provide the longest life
and fastest cut rate of all coated abrasives.
CERAMIC
Ultimate in performance
and long life with high
tolerance to
high pressure and high
temperatures.
BEST VALUE FOR YOUR
DOLLAR
Abrasives
• Product Description• Aluminum oxide grain Surface
Conditioning Quick Change Discs are designed for light grinding, blending, cleaning, gasket removal, and finishing.
• Applications• A-CRS (Brown) – Light grinding,
stock removal, weld splatter, and scale removal
• A-MED (Red) – Remove scratches, pits, and corrosion
• A-VFINE (Blue) – Blending and finishing
• Metals• Stainless Steel• Aluminum• Sheet Metal• Exotic Metals
Part # SIZE GRIT COLOR QT360-021360-024360-027
2”
2”
2”
FINEMEDIUMCOARSE
BLUEMAROONBROWN
252525
Part # SIZE GRIT COLOR QT360-032360-033360-035360-037
3”
3”
3”
3”
VERY FINEFINE
MEDIUMCOARSE
BLUEMAROONBROWN
25252525
Part # SIZE GRIT COLOR QT
Part # SIZE QT360-002360-003360-004
2”
3”
4”
EaEaEa
Arbor
www.cfisgroup.com Phone: 614-332-7464 33
Abrasives
• Product Description
• Scotch-Brite Bristle Disc are molded, abrasive filled bristle disc which is used for automotive use on aluminum and metal. Use this product instead of a wire brush for many tasks including: deburring, blending, polishing, finishing, cleaning, coating, defect removal, scratch removal and rust removal. The product bristle disc is measured using its outside diameter which is 2 inches and 3inches. It’s quick change attachment makes it quick and easy to mount it to the tool or pad. The product rotates and spins, just like other products in its category, at the maximum speed possible. The bristle disc can run at a maximum speed of 25000 RPM. Quantity: ea.
• Scotch-Brite Bristle Discs & Brushes last longer than most abrasives and provide the same finish and cut throughout their life.
• An operator quickly and easily achieves a quality, consistent finish with light pressure.
• For productivity in automated procedures, there are fewer changeovers.
• These fast running discs efficiently clean or strip many substances from metal surfaces without damaging the work piece.
• Consistent supply of abrasives
Part # SIZE GRIT COLOR QT360-088360-090360-092
2”
2”
2”
FINEMEDIUMCOARSE
WHITEYELLOWGREEN
EAEAEA
Part # SIZE GRIT COLOR QT360-094360-096360-098
3”
3”
3”
FINEMEDIUMCOARSE
WHITEYELLOWGREEN
EAEAEA
33-3-M SURFACE 33 MMMMMM SURFAACECONDITIONING NNNNNDDDDDDIITTTTTTIIOOOOOOOONNNNNN
DISC
www.cfisgroup.com Phone: 614-332-7464 34
Abrasives
• Features and Benefits• Coated abrasives can be used for most
applications, from grinding to polishing. They consist of a thin layer of abrasive adhered to fiber, paper, cloth or rubber. Coated discs are normally used on angle grinders.
• Aluminum oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical and fracture resistant. Commonly used on ferrous alloys, high-tensile materials and wood.
• Type R discs feature roll-on/off fasteners.
Part # SIZE GRIT QT360-132 3” 80 25360-135 3” 60 25360-137 3” 50 25360-139 3” 40 25360-141 3” 36 25360-143 3” 24 25
Part # SIZE GRIT QT360-101 2” 100 25360-102 2” 80 25360-104 2” 60 25360-106 2” 50 25360-108 2” 40 25360-110 2” 36 25360-112 2” 24 25
• Features and Benefits• Coated abrasives can be used for most
applications, from grinding to polishing. They consist of a thin layer of abrasive adhered to fiber, paper, cloth or rubber. Coated discs are normally used on angle grinders.
• Aluminum oxide is the usedpurpose deburring and blending, it is tough, economical and fracture resistant. Commonly used on ferrous alloys, hightensile materials and wood.
www.cfisgroup.com Phone: 614-332-7464 35
Abrasives
Part # SIZE GRIT QT360-210 2” 36 25360-212 2” 24 25
Part # SIZE GRIT QT360-220 3” 36 25360-222 3” 24 25
www.cfisgroup.com Phone: 614-332-7464 36
•HIGH PERFORMANCE CERAMIC
GRAIN - Most aggressive and top
performing grain for fast cuts and
long life in demanding industrial
grinding applications.
•CUTTING SURFACE
REGENERATION - Tough ceramic
grain slowly wears away,
exposing fresh, sharp cutting
surfaces.
•PSA DESIGN - Pressure sensitive
adhesive quickly allows discs to
adhere to backing plates;
removes cleanly without tools or
leaving a residue.
•EXTENDED DISC LIFE - Unique
coating over the ceramic cutting
layer provides lubricity and
dissipates heat for extended
grinding life.
•GRINDS DIFFICULT MATERIALS -
Ideal for grinding stainless steel,
tool steel,and other hard-to-grind
metal alloys.
•MADE IN THE U.S.A.
Abrasives
• Product features• Outperforms steel wool for cleaning,
blending, prepping and finishing on metal, wood, plastics and composites
• Performs like steel wool without shredding, rusting, or splintering
• Pad conforms to irregular surfaces and gets into corners without losing performance
• Cleans metal, composites, and other materials without altering the base material
• Load and heat resistant non-woven web provides consistent finishing over the life of the pad
• Product description• Scotch-Brite hand pad combines
durability for long life, flexibility for reaching tight areas, and can be used in place of steel wool for conditioning metal surfaces and paint prep. Unlike fine steel wool, Scotch-Brite pads will not shred during use, rust after use, or leave fine metal splinters.
Part # WIDTH LENGTH COLOR QT
360-535360-540360-545360-550360-555360-560
6 x 96 X 96 X 96 X 96 X 96 X 9
ULTRA FINEFINEFINE
MEDIUMCOARSE
HEAVY DUTY
WHITE (STAINLESS)BLACK (STAINLESS)
GRAYGREEN
MARRONTAN
101010101010
SURFACE SURFAACECONDITIONING NNNNDDDDDDIITTTTTTIIOOOOOOOONNNNNN
DISC
www.cfisgroup.com Phone: 614-332-7464 37
Abrasives
Part # SIZE ARBOR TYPE GRIT QTY361-126361-130361-134
4-1/2 4-1/2 4-1/2
5/8-115/8-11 5/8-11
FLATFLATFLAT
806040
EaEaEa
Alugrind
Revolutionary solution for grinding and finishing aluminum and soft metals.The symmetric net structure enables an efficient cut for consistent stock removaland reduces the number of steps used for finishing aluminum. Lower pressure reducesoperator fatigue. Long life of these discs results in fewer discs needed to complete thejob. This also saves time and money due to fewer changeovers.
The biggest advantage of the alugrind disc is that they provide you with clog free non-loading grinding and generate very little heat due to heat dissipation that can occur
during aggressive grinding and the melting of work piece surface is nonexistent.
www.cfisgroup.com Phone: 614-332-7464 38
Abrasives
Part # SIZE GRIT QTY361-472361-474361-476
3”
3”
3”
406080
EaEaEa
Part # SIZE GRIT QTY361-454361-456361-458
2”
2”
2”
406080
EaEaEa
Alugrind
Revolutionary solution for grinding and finishing aluminum and soft metals.The symmetric net structure enables an efficient cut for consistent stock removaland reduces the number of steps used for finishing aluminum. Lower pressure reducesoperator fatigue. Long life of these discs results in fewer discs needed to complete thejob. This also saves time and money due to fewer changeovers.
The biggest advantage of the alugrinddisc is that they provide you with clog free non-loading grinding and generate very little heat due to heat dissipation that can occur
during aggressive grinding and the melting of work piece surface is nonexistent.
www.cfisgroup.com Phone: 614-332-7464 39
Abrasives
Part # SIZE ARBOR TYPE GRIT QTY361-220361-224361-228
4-1/2 4-1/2 4-1/2
5/8-115/8-115/8-11
FLATFLATFLAT
806040
EaEaEa
Part # SIZE ARBOR TYPE GRIT QTY361-242361-246361-250
5”
5”
5”
5/8-115/8-115/8-11
FLATFLATFLAT
806040
EaEaEa
www.cfisgroup.com Phone: 614-332-7464 40
Part # SIZE ARBOR TYPE GRIT QTY361-254361-256361-258
6”
6”
6”
5/8-115/8-115/8-11
FLATFLATFLAT
806040
EaEaEa
High Performance
Self-Sharpening Grain
•PREMIUM CRIMSON CERAMIC GRAIN -
New engineered crystalline structure is
ideal for quickly and effectively
grinding and finishing tough to grind
alloys.
•SUPERIOR PERFORMANCE ON TOUGH
ALLOYS - Stainless Steel, Cobalt &
Inconel, Titanium Alloys, Super-Alloys.
•HIGH CUT RATE - Aggressive grain has
fast stock removal that noticeably
outperforms aluminum oxide and
zirconia in difficult grinding
applications.
•30% MORE PRODUCTIVITY - Higher
cut rate increases productivity for
faster work completion and decreased
worker fatigue.
•SELF SHARPENING ABRASIVE - High
performance ceramic grain regenerates
as it is used for consistent
performance throughout the lifetime of
the disc.
•EXTRA THICK - LONGER LIFE - 60%
thicker than conventional flap discs for
substantially increased life and
runtime.
•COOLER RUNNING - Designed to
work with heat sensitive
materials and resists leaving
scorch/heat marks on grinding
substrates.
•SAFE IN USE - Flap discs are
safer in use when compared to
grinding wheels as they will not
break or fracture when dropped
or abused.
Abrasives
CFIS Max Force flap discs utilize a zirconia abrasive - a sharp and long-life abrasive grain known for excellent material removal. Max Force flap discs are offered in two styles: Max Force HD using a high-density construction for a thicker, more cushioned contact with the surface, and Max Force - the standard profile flap disc construction.
Main application - high performance grinding and finishing of all metalsExcellent on stainless, mild steel, welds, and de-burringHigh density profileOutlasts standard density discs by 50%Zirconia grain outlasts aluminum oxide up to 3-to-1
Part # SIZE ARBOR TYPE GRIT QTY361-312361-314361-316361-320
4-1/2 4-1/2 4-1/24-1/2
5/8-115/8-11 5/8-11 5/8-11
FLATFLATFLATFLAT
120806040
EaEaEaEa
Part # SIZE ARBOR TYPE GRIT QTY361-302361-304361-306361-310361-311
4-1/2 4-1/2 4-1/24-1/24-1/2
7/8 HOLE7/8 HOLE7/8 HOLE7/8 HOLE7/8 HOLE
FLATFLATFLATFLATFLAT
12080604036
EaEaEaEaEa
Part # SIZE ARBOR TYPE GRIT QTY361-360 4-1/2 7/8 HOLE 29 40 Ea
Part # SIZE ARBOR TYPE GRIT QTY361-380 6” 7/8 HOLE FLAT 60 Ea
Part # SIZE ARBOR TYPE GRIT QTY361-389 7” 7/8 HOLE FLAT 60 Ea
www.cfisgroup.com Phone: 614-332-7464 41
40% more material than
standard flap disc
Abrasives
CFIS Zirconia grain Mini Flap Quick Change Discs are designed for controlled grinding, blending, and finishing.
MetalsStainless steelAluminumMild steel
FeaturesUnique flap design for flexibilitySmall diameter for access into small areasQuick lock system for easy product changeoverLong life compared with resin fiber discs
ApplicationsBlending and finishingRemoving machine tool marksGeneral cleaningContouring
Part # SIZE GRIT QTY361-420361-425361-430361-435361-440
3”
3”
3”
3”
3”
36406080
120
EaEaEaEaEa
Part # SIZE GRIT QTY361-410361-412361-414361-416361-418
2”
2”
2”
2”
2”
36406080120
EaEaEaEaEa
www.cfisgroup.com Phone: 614-332-7464 42
Abrasives
Part # SIZE GRIT QTY361-200361-202361-204361-206
3”
3”
3”
3”
406080
120
EaEaEaEa
www.cfisgroup.com Phone: 614-332-7464 43
High Performance
Self-Sharpening Grain
EXTREME PERFORMANCE - Proprietary ceramic matrix abrasive grain provides exceptional service life; outperforming other high performance ceramic flap discs.TYPE "R" MOUNT - Provides fast and reliable "1/2 turn-on, 1/2 turn-off" attachment of mini flap discs.AGGRESSIVE GRINDING - Lay-flat horizontal flaps combined with an extremely rigid backing plate give aggressive grinding plus the service life of a jumbo-sized flap disc.HIGH SURFACE AREA DESIGN - The horizontal flap configuration provides the same abrasive surface area as a conventional jumbo (extra thick) flap disc, providing long service life.SUPERIOR PRODUCTIVITY - Higher grinding rate offers up to 33% more productivity than other ceramic grinding discs, providing faster work completion and decreased user fatigue.HIGH CUT RATE - Offers superior performance on tough alloys including Stainless Steel, Cobalt, Inconel, Titanium Alloys and Super-Alloys.CONSISTENT PERFORMANCE - Self-sharpening high performance ceramic matrix abrasive grain regenerates as it is used, exposing fresh, sharp abrasive grain for consistent performance throughout the life of the disc.COOLER RUNNING - Designed to work with heat sensitive materials and resists leaving scorch/heat marks on grinding substrates.
Abrasives
• CFIS MAROON STRIP DISC
• ULTIMATE PERFORMANCE – Removes heavy rust and corrosion, paint and other thick coatings
• EXTREME LONG LIFE – Lasts up to 4 times as long as conventional high performancestripping discs
• AGGRESSIVE SURFACE STRIPPING –Proprietary blend of durable ceramic alumina grain and an advanced resin bond system rapidly removes up to twice as much surface contamination as conventional stripping discs
• FLEXIBLE & CONFORMABLE – Conforms to irregular and contoured surfaces
• VERSATILE – Use one disc for multiple types of surface stripping operations
• SUPERIOR CONTROL – Light pressure provides smoother surface finishing –Additional pressure allows more aggressive material removal
• OPEN STRUCTURE DESIGN – Will not load up on coatings and metals and resist snagging when deburring
• REDUCED DOWN TIME – Longer lasting discs offer fewer disc change-outs and less user down time
• TYPE-R MOUNT – Provides fast and reliable ½ turn-on, ½ turn-off attachment.
METALDEVILS
• CFIS BLACK STRIP DISC
Part # GRIT SIZE QT361-510361-514361-516
CoarseCoarseCoarse
2”
3”
4”
222
Part # GRIT SIZE QT361-502361-504361-506
X-CoarseX-CoarseX-Coarse
2”
3”
4”
222
Scarlet Metal Devils
Black Metal Devils
www.cfisgroup.com Phone: 614-332-7464 44
Abrasives
• CFIS PURPLE EXTREME STRIP DISC
• ULTIMATE PERFORMANCE – Cleans welds, Removes heavy rust and corrosion, paint and other thick coatings
• EXTREME LONG LIFE – Lasts up to 6 times as long as conventional high performancestripping discs
• EXTREME AGGRESSIVE SURFACE STRIPPING – Proprietary blend of durable ceramic alumina grain and an advanced resin bond system rapidly removes up to there times as much surface contamination as conventional stripping discs
• FLEXIBLE & CONFORMABLE – Conforms to irregular and contoured surfaces
• VERSATILE – Use one disc for multiple types of surface stripping operations
• SUPERIOR CONTROL – Light pressure provides smoother surface finishing –Additional pressure allows more aggressive material removal
• OPEN STRUCTURE DESIGN – Will not load up on coatings and metals and resist snagging when deburring
• REDUCED DOWN TIME – Longer lasting discs offer fewer disc change-outs and less user down time
• TYPE-R MOUNT – Provides fast and reliable ½ turn-on, ½ turn-off attachment.
PurpleDevilExtreme
Part # GRIT SIZE QT361-620361-625
XX-CoarseXX-Coarse
2”
3”
22
Purple Devil Extreme
www.cfisgroup.com Phone: 614-332-7464 45
Part # GRIT ARBOR QT361-630361-635
XX-CoarseXX-Coarse
7/85/8-11
EaEa
Purple Devil Extreme
Abrasives
• Product features• Outperforms steel wool for cleaning,
blending, prepping and finishing on metal, wood, plastics and composites
• Performs like steel wool without shredding, rusting, or splintering
• Pad conforms to irregular surfaces and gets into corners without losing performance
• Cleans metal, composites, and other materials without altering the base material
• Load and heat resistant non-woven web provides consistent finishing over the life of the pad
• Product description• Scotch-Brite hand pad combines
durability for long life, flexibility for reaching tight areas, and can be used in place of steel wool for conditioning metal surfaces and paint prep. Unlike fine steel wool, Scotch-Brite pads will not shred during use, rust after use, or leave fine metal splinters.Part # SIZE WIDTH QT
361-518 2” 1” EA361-520 3” 1” EA361-522 4” 1” EA
METALDEVILS
www.cfisgroup.com Phone: 614-332-7464 46
Abrasives
• ULTIMATE PERFORMANCE –Removes heavy rust and corrosion, paint and other thick coatings
• EXTREME LONG LIFE – Lasts up to 4 times as long as conventional high performance stripping discs
• AGGRESSIVE SURFACE STRIPPING – Proprietary blend of durable ceramic alumina grain and an advanced resin bond system rapidly removes up to twice as much surface contamination as conventional stripping discs
• FLEXIBLE & CONFORMABLE –Conforms to irregular and contoured surfaces
• VERSATILE – Use one disc for multiple types of surface stripping operations
• SUPERIOR CONTROL – Light pressure provides smoother surface finishing – Additional pressure allows more aggressive material removal
• OPEN STRUCTURE DESIGN – Will not load up on coatings and metals and resist snagging when deburring
• REDUCED DOWN TIME – Longer lasting discs offer fewer disc change-outs and less user down time
• TYPE-R MOUNT – Provides fast and reliable ½ turn-on, ½ turn-off attachment.
METALDEVILS
• CFIS BLACK STRIP DISC
Scarlet Metal Devils
Black Metal Devils
• CFIS MAROON STRIP DISC
Part # GRIT SIZE QT361-560361-555
CoarseCoarse
4-1/2 X 7/84-1/2 X 5/8-11
11
Part # GRIT SIZE QT361-580361-585
HDXCRSHDXCRS
4-1/2 X 7/84-1/2 X 5/8-11
11
www.cfisgroup.com Phone: 614-332-7464 47
Abrasives
Part # GRIT QT364-750364-752364-754364-756
6080120180
EaEaEaEa
Grit 60, 80, 120, 180
Diameter 3”
Width 2"
Mandrel 1/4"
CFIS ULTRA WOVEN SCOTCHBRITE FLAP WHEELS• Flexible, conforms to irregular surfaces
in a hand held form • Removes burrs and micro burrs on
threaded parts • Finishing aluminum extrusions, brass,
and stainless steel • Fine scratch pattern for preparation of
cutlery and cookware • Re-orient grain finish on stainless steel
and strike plates • Excellent for removing heavy oxidation, • blending, cleaning, and deburring• For use on: Aluminum, Metal, Stainless,
Wood
www.cfisgroup.com Phone: 614-332-7464 48
Abrasives
Part # SIZE FACE GRIT MAX RPM
QT
365-108365-112365-116
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”’
6080120
25,00025,00025,000
222
365-122365-124365-126365-128
1”
1”
1”
1”
1”
1”
1”
1”
6080120180
25,00025,00025,00025,000
2222
365-134365-136365-138
1-1/2”
1-1/2”
1-1/2”
1”
1”
1”
6080120
25,00025,00025,000
222
365-142365-144365-146365-148365-150365-152
2”
2”
2”
2”
2”
2”
1”
1”
1”
1”
1”
1”
406080120180240
25,00025,00025,00025,00025,00025,000
222222
365-182365-184365-186365-188
3”
3”
3”
3”
1”
1”
1”
1”
406080120
25,00025,00025,00025,000
2222
CFIS FLAP WHEELS• Aluminum oxide abrasive cloth.• Provides consistent grinding and
finishing action throughout the lifeof the wheel.
• Fresh new abrasive edges are continuously ex posed to the work.
• Non-loading: Flexible flaps prevent loading that occurs with rigidabrasives.
• Conforms to concave and convex surfaces allowing access tohard-to-reach areas.
• 1/4" shank on all wheels is bonded into an epoxy core.
• Applications:• Final finish on metal surfaces.• Deburring and flash removal on
machined parts.• Edge blending.• Blending and finishing of dies,
molds, tools, tubing, channels.• Cleaning.• Smoothing metal, plastic, wood,
rubber.• Removing tool marks.• Finishing for painting, plating.
www.cfisgroup.com Phone: 614-332-7464 49
Sanding Paper
• Premium aluminum oxide grain. • Special agents virtually eliminate
loading.• Flexible resin bond system
produces greater resistance to heat and increased durability.
• Cool, free cutting action over long periods of time, Lasts up to 300% longer than other PSA rolls.
• Excellent for hand-sanding and block-sanding on all paint coatings and non-ferrous metals.
• 100% impervious to bonding breakdown by water, cutting fluid, grease, chemicals, and other solvents.
• Exposure to solvents will not cause abrasive loss or loading.
• Extended service life compared to standard "Dry" abrasive cloth when used in dry applications.
• Convenient and effective for deburring, cleaning, and polishing metal parts.
• Supplied in 50 yard rolls on spools for easy dispensing.
Part # GRIT LENGTH WIDTH QTY363-012363-014363-016363-020363-022363-024363-026
6080
120180240320400
50 YD50 YD50 YD50 YD50 YD50 YD50 YD
1 1/21 1/21 1/21 1/21 1/21 1/21 1/2
EaEaEaEaEaEaEa
Shop Rolls / Aluminum Oxide 50 Yd Rolls
Part # GRIT WIDTH LENGTH363-032 600 1-1/2 50 YD
Crocus Sand Paper
• Ferrous Oxide based abrasive grain.
• Ideal for cleaning and polishing soft metals.
• Flexible cloth backing allows easy working on curved surfaces.
• 1-1/2” x 50 yard roll.
• Made with silicon carbide grain, a sharp synthetic mineral that cuts fast.
• Drywall screen is waterproof; open mesh design resists loading –rinse and reuse.
• Ideal for sanding drywall compound and patching plaster prior to priming.
Shop Rolls / Aluminum Oxide 50 Yd Rolls
www.cfisgroup.com Phone: 614-332-7464 50
Sanding Paper
Part # GRIT QT354-534364-536364-540364-542364-546364-548
5” X 40
5” X 80
5” X 120
5” X 180
5” X 240
5” X 320
100100100100100100
Part # GRIT QT364-565364-570364-575364-580364-585364-590364-590364-593364-596
6” X 40
6” X 80
6” X 120
6” X 180
6” X 240
6” X 320
6” X 400
6” X 600
6” X 800
100100100100100100100100100
Stick-It Sanding Disc Arbor
Part # DESCRIPTION QTY364-505364-506
5” Arbor
6” Arbor
EaEa
• Tough backing for extremely good durability.
• High performance aluminum oxide grain provides long service life.
• Adhesive backing is Pressure Sensitive, holds fast when in use, peels off easy when changed.
• Will not leave behind adhesive residue.• Excellent for general grinding,
deburring and blending.
MADE IN THE U.S.A.
• Grinding and stock removal• Edge breaking, surface blending• Cost effective when sanding materials
that load or gum up• Semi-open coat with load-resistant size
coat• for aggressive action• Great for sanding fiberglass
• Materials Tool Selector• Ferrous• Non-Ferrous• Plastics• Wood• Solid Surfaces• Composites
CFIS S Shuru -r-Kutut Peel & Stick CFIS Shhhhuur KKKKKKuuuuuut PeAbrasives Disc
www.cfisgroup.com Phone: 614-332-7464 51
Grinding / CuttingColumbus Fleet Industrial Supply
Canton Fleet Industrial Supply
Canton First Aid & Safety
www.cfisgroup.com Phone: 614-332-7464 52
Grinding Wheels
CFIS FIRE GRIND• • State-of-the-Art Ceramic Grain =
Rapid Material Removal and• Cool Grinding for Improved Productivity• Designed to Enhance Surface Work Area
and Increase Disc Life• • Superior Ergonomic Design Delivers
Ease of Use - Unparalleled• Productivity = Up to 50% Reduction in
Process Time with• • Vibration-Free Performance =
Reduction of Noise, Dust and• Operator Fatigue• 70% LIGHTER than a conventional
grinding wheel.• • User-Friendly = Rugged Yet
Lightweight Construction• Applications:• • Weld bead removal
• • Surface grinding
• • Edge grinding and deburring
• • Chamfering and beveling
• • Flame-cut steel removal
Part # SIZE COLOR QT362-034362-038
4-1/2”
5”
7/8” ARBOR
7/8” ARBOR
EAEA
CFIS CERAMIC FIRE GRIND
www.cfisgroup.com Phone: 614-332-7464 53
Grinding Wheels
CFIS Alloy Eater When you need versatility to cut and grind on various types of materials, look no further than our High Energy lineup. Formulated to tackle any job quickly and with precision. A very well suited choice for all fabrication projects involving mild steel.• Primary application - ferrous metals
(structural steel, iron, welds, etc.)• Premium grinding wheel made of
higher quality abrasive grain• Enhanced wheel life with strong stock
removal rate
CFIS ALLOY EATER HIGH ENERGY GRINDING WHEELS
Part# Size Qty.
362-090362-104362-125362-100362-120
2” x 1/8” x 3/8 arbor
4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-114 X 1/4 X 5/87 X 1/4 X 7/8
EAEAEAEAEA
CFIS MAX FORCE GRINDING WHEELS
Part# Size Qty.
362-105362-127362-126
4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-117 X 1/4 X 5/8-11
EAEAEA
CFIS Max Force grinding wheels aggressively remove steel in the most challenging applications. Whether smoothing flame-cut edges on heavy gauge plate, grinding casting parting lines, or any grinding operation where heavy stock removal is desired - Max Force wheels get it done to perfection. They are designed for maximum rate of material removal with extended service life. This formulation performs especially well on premium grinders that deliver a lot of torque. On a cost-per-pound comparison, these wheels give the best bang for your buck.
• Primary application - stainless steel and high tensile alloys
• Secondary application - ferrous metals (structural steel, iron, welds, etc.)
• Premium grinding wheel made of higher quality zirconia grains
• Superior stock removal and wheel life
www.cfisgroup.com Phone: 614-332-7464 54
Grinding Wheels
• CFIS A general purpose formulation with attitude. Don't be mistaken, this is a serious workhorse that strikes a great balance between wheel life and material removal. Made in the USA to exacting standards so you can expect consistent performance from every single wheel. Lightning wheels are a good choice for applications where versatility of material type and fast removal rate are important to the operator.
• Primary application - ferrous metals (structural steel, iron, welds, etc.)
• Softer bond - improved grinding time and reduced operator fatigue
• Fast stock removal
CFIS LIGHTNING GRINDING WHEELS
Part# Size Qty.
362-102362-130362-106362-108362-131362-120362-135362-140
4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-115 X 1/4 X 7/86 X 1/4 X 7/86 X 1/4 X 5/8-117 X 1/4 X 7/87 X 1/4 X 5/8-119 X 1/4 X 5/8-11
EAEAEAEAEAEAEAEA
Part# Size Qty.
362-103362-132
4-1/2 x 1/4 x 7/84-1/2 X 1/4 X 5/8-11
EAEA
CFIS HIGH ENERGY GRINDING WHEELS offer Versatile and long-life grinding wheels for almost all ferrous and non-ferrous materials. We offer three distinct formulations for mild steel, stainless, and aluminum - all providing rapid grinding action and industry leading wheel life. Achieves great performance on all quality levels of electric and air grinders. Priced lower than the Max Force lineup while still offering extended performance.
• Primary application - non-ferrous metals (aluminum, brass, and copper)
• Special formulation with softer bond to prevent loading
• Fast stock removal
Part# Size Qty.
362-137 7 X 1/4 X 5/8-11 EA
Fast stock removal
Part# Size Qty.
DEPRESSED CENTER
www.cfisgroup.com Phone: 614-332-7464 55
CFIS HIGH ENERGY GRINDING WHEELS
Grinding Wheels
• CFIS Max Force The professional's choice for any major pipe welding application. These wheels do it all -bevel, root pass, and finish. The ruggedness of these wheels help maintain a nicely profiled edge for consistent grinding of weld bead between pipe sections. Offers great operator control with smooth cutting action as the result of the exceptional wheel balance.
• Primary application - stainless steel, high tensile alloys
• Exceeds the demands of the oil and gas pipeline industry
• Premium zirconia abrasive grains• Harder bond for improved wheel life
and increased performance
CFIS PIPELINE GRINDING WHEELS
Part# Size Qty.
362-112 6 X 1/4 X 7/8 EA
• CFIS Lightning wheels provide a great value for applications where wheel cost is a primary concern. Made of aluminum oxide, these wheels work well on nearly all metals and give performance equal to or better than the top-tier products offered by other companies. This is a great value for your abrasive dollar.
• Primary application - ferrous metals (structural steel, iron, welds, etc.)
• General performer for root pass grinding in the oil and gas pipeline industry
• Harder bond for improved wheel life and increased performance
CFIS PIPELINE GRINDING WHEELS
Part# Size Qty.
362-150 6 X 1/8 X 7/8 EA
www.cfisgroup.com Phone: 614-332-7464 56
Grinding Wheels
• CFIS CERAMIC WHEEL• Product description
• 4-1/2" x 1/4" x 5/8"-11 Type 27 Depressed Center Grinding Wheel Saitech Attacker Stainless High Performance
• SAIT 20146 high performance, ceramic aluminum oxide grain.
• Very uniform, high density grain structure is extremely durable and self sharpening for long life and cooler cut.
• Extremely fast stock removal on hard metal with minimal pressure.
• For use on stainless steel and other high tensile alloys and ferrous metals.
• Reinforced with the highest quality fiberglass for maximum safety and performance.
CFIS CERAMIC GRINDING WHEELS
Part# Size Qty.
362-128 4-1/2 X 1/4 X 5/8-11 EA
www.cfisgroup.com Phone: 614-332-7464 57
Cutting Wheels
LIGHTNING
TA60T
• Lightning is the thinner version of the High Energy formulation. It has the same great performance along with a slightly faster cutting speed. Its thinner profile creates a smaller cut-line in the material and adds bit more flexibility for getting into tight recesses.
• Primary application - ferrous metals (structural steel, iron, welds, etc.) Ideal for thin wall work turning
• Secondary application -stainless steel for fast, burr-free cutting
• .035" thickness
• Treated aluminum oxide grains
• Fine grit
CFIS LIGHTNING
FERROUS METALS
STRUCTURAL STEEL, IRON, WELDS
Part # SIZE HOLE MAX RPM QT362-206362-208
3 X .0354 X .035
3/81/4
25,45025,450
1010
STRUCTURAL STEEL, IRON, WELDS
Part # SIZE HOLE MAX RPM
QT
362-215362-214362-220
4-1/2 X .0454-1/2 X .045
6 X .045
7/85/8-11
7/8
13,00013,00010,200
10Ea10
www.cfisgroup.com Phone: 614-332-7464 58
Cutting Wheels
HIGH ENERGY
TA46T
• Premium level of performance and extended wheel life.
• They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.
• Primary application - ferrous metals (angle iron, rebar, steel, etc.)
• Secondary application - stainless steel and 1/16″ high tensile alloy
• Long life• High performance on ferrous
metals
CFIS HIGH ENERGY
FERROUS METALS
ANGLE IRON AND REBAR STEEL
Part # SIZE HOLE MAX RPM
QT
362-210362-213
4 X 1/164 X 1/16
3/85/8
25,45015,000
1010
Part # SIZE HOLE MAX RPM
QT
362-211 4 X .040 5/8 15,000 10
LIGHTNING ALUMINUM OXIDE INCREASE PERFORMANCE
www.cfisgroup.com Phone: 614-332-7464 59
Cutting Wheels
HIGH ENERGYAL46T
• Primary application - non-ferrous metals (aluminum, brass, copper, etc.)
• .040″ thickness
• Fast, cool, burr-free cutting• Specially formulated to prevent
loading•
APPLICATION:• Aluminum, Brass and Copper
CFIS HIGH ENERGY
ALUMINUM
BRASS / COPPER
Part # SIZE HOLE TYPE MAX RPM
QT
362-246 4-1/2 X .040 7/8 AL46N 13,300 10
CFIS CUTTING WHEEL ARBOR
Part# Desc Qty.
362-196 CUT-OFF ARBOR 1/4 & 3/8 Ea
www.cfisgroup.com Phone: 614-332-7464 60
Cutting Wheels
MAX FORCE CERAMIC
CER36T
• Type 1 ceramic cutting wheels are top performers. These wheels offer state-of-the-art ceramic grain for premium cooler cutting with sharper, faster cuts, as well as self-sharpening strength and durability on every rotation.
• These wheels are excellent for extra sharp power for cutting thru sheet metal, stainless steel tubing pipes and rusted bolts to name a few.
• Premium value on carbon steel and stainless steel leads us to boast precision performance with high efficiency.
• APPLICATION:
• Carbon steel and Stainless Steel
CFIS MAX FORCE CERAMIC
SHEET METAL, STAINLESS STEEL,
RUSTED BOLTS
Part # SIZE HOLE TYPE MAX RPM
QT
362-910362-900362-930362-920362-217
3 X .0453 X .0454 X .0454 X .045
4-1/2 X .045
1/43/81/43/83/8
CER36TCER36TCER36TCER36TCER36T
25,45025,45019,00019,00013,300
1010101010
www.cfisgroup.com Phone: 614-332-7464 61
Cutting Wheels
Part# Size Qty.
362-230362-235
41/2 X .045 x 7/86 X .045 X 7/8
1010
CFIS TYPE 27 CFIS TYPE 27 HIGH ENERGY
CUTCUT-CUT-OFF WHEELS
CFIS High Energy thin cut-off wheels offer a premium level of performance and extended wheel life. They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.• Primary application - ferrous metals and
stainless applications• A rigid, thicker wheel with improved grain
and resin combination to take on the most demanding cutting applications
• .045" thickness• Long life and faster cutting
CFIS Lightning wheels are essentially a thinner version of our High Energy formulation. All the same great performance with slightly faster cutting speed and smaller cut-line in the material being worked on. Due to their thinner profile, Lightning wheels had added flexibility, allowing them to get into tight areas.Primary application - ferrous metals(steel, iron, welds, etc.)
.040″ thickness
Fast, cool, burr-free cuttingSpecially treated aluminum oxide grain for increased performance
Part# Size Qty.
362-228362-240
4 X .040 x 5/87 X .040 x 7/8
1010
CFIS TYPE 27 CFIS TYPE 27 LIGHTNING
CUTCUT-CUT-OFF WHEELS
..
..
www.cfisgroup.com Phone: 614-332-7464 62
Cutting Wheels
MAX FORCE THIN
SGA60U
• Primary application - stainless steel, high tensile alloys, chrome, and Inconel alloys
• Contaminant-free cutting. No iron, sulfur, or chlorine
• .045" thickness
• Super premium
• Long life and faster cutting
• APPLICATION:
• Carbon steel and Stainless Steel
CFIS MAX FORCE THIN
STAINLESS STEEL
HIGH TENSILE ALLOYS
CHROME
Part # SIZE HOLE MAX RPM
QT
362-233 6 X .045 7/8 10,200 10
..
www.cfisgroup.com Phone: 614-332-7464 63
Cutting Wheels
MAX FORCE THIN
ZA60T
• Primary application - stainless steel and high tensile alloys
• Secondary application - ferrous metals (structural steel, iron, welds, etc.)
• .040" thickness
• Super premium
• Long life and faster cutting
• Zirconia grain
• APPLICATION:
• Stainless Steel and High Tensile Alloys
CFIS MAX FORCE THIN
STAINLESS STEEL
HIGH TENSILE ALLOYS
Part # SIZE HOLE MAX RPM
QT
362-216362-218362-222
4-1/2 X .0406 X .0407 X .040
7/87/87/8
13,30010,2008,500
101010
..
www.cfisgroup.com Phone: 614-332-7464 64
Cutting Wheels
HIGH ENERGY
TA60U
• High Energy thin cut-off wheels offer a premium level of performance and extended wheel life.
• They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.
• APPLICATION:
• Ferrous Metals and
• Stainless Steel
CFIS HIGH ENERGY
FERROUS METALS
STAINLESS STEEL
Part # SIZE HOLE MAX RPM
QT
362-215362-220
4-1/2 X .0456 X .045
7/87/8
13,00010,200
1010
www.cfisgroup.com Phone: 614-332-7464 65
Cutting Wheels
HIGH ENERGY
TA36T
• High Energy thin cut-off wheels offer a premium level of performance and extended wheel life. They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.
• Primary application - ferrous metals (angle iron, rebar, steel, etc.)
• Secondary application -stainless steel and 3/32″ high tensile alloy
• For heavy-duty use
CFIS HIGH ENERGY
FERROUS METALS
STAINLESS STEEL
Part # SIZE HOLE MAX RPM
QT
362-200362-201362-202362-210
2 X .1/82-1/2 X 1/8
3 X 1/164 X 1/16
3/83/81/43/8
38,20030,50025,45019,000
10101010
www.cfisgroup.com Phone: 614-332-7464 66
Cutting Wheels
MAX FORCE HIGH ENERGY
A60T
• Competitor wheels are an entry-level cutting wheel designed for most applications.
• Primary application - ferrous metals (steel, iron, welds, etc.)
• Value line
• General purpose
CFIS HIGH ENERGY
FERROUS METALS
IRON STEEL AND WELDS
Part # SIZE HOLE MAX RPM
QT
362-212 4 X .045 5/8 15,000 10
..
www.cfisgroup.com Phone: 614-332-7464 67
Cutting Wheels
CFIS CFIS ULTRA CUT HIGH ENERGY
STAINLESS STEEL
HIGH TENSILE ALLOYS
CFIS MAX FORCEThin cut-off wheels turn your grinder into a turbocharged cutting machine. These are the fastest cutting and longest lasting wheels we have ever designed -they tackle every type and cross-section of material with impressive results. If you are using a high-powered grinder and want to maximize performance, Max Force wheels are the ones that will get you to the winner's circle.
ZA60T
• Primary application - stainless steel and high tensile alloys
• Secondary application - ferrous metals (structural steel, iron, welds, etc.)
• .040" thickness
• Super premium
• Long life and faster cutting
• Zirconia grain
Part # SIZE HOLE MAX RPM
QT
362-231 4-1/2 X .040 5/8 13,300 10
www.cfisgroup.com Phone: 614-332-7464 68
Cutting Wheels
CFIS CFIS ULTRA CUT HIGH ENERGY
FERROUS METALS
STAINLESS APPLICATIONS
CFIS HIGH ENERGYHigh Energy thin cut-off wheels offer a premium level of performance and extended wheel life. They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.
TA60U
• Primary application - ferrous metals and stainless applications
• A rigid, thicker wheel with improved grain and resin combination to take on the most demanding cutting applications
• .045" thickness• Long life and faster cutting
Part # SIZE HOLE MAX RPM
QT
362-230362-235
4-1/2 X .0456 X .045
7/87/8
13,30010,200
1010
..
www.cfisgroup.com Phone: 614-332-7464 69
Cutting Wheels
CFIS CFIS ULTRA CUT HIGH ENERGY
FERROUS METALS
ANGLE IRON AND REBAR STEEL
CFIS HIGH ENERGYHigh Energy thin cut-off wheels offer a premium level of performance and extended wheel life. They are a slightly thicker version of our Lightning wheels, yet still maintain the rapid cutting quality of thinner wheels.
TA60T
• Primary application - ferrous metals (angle iron, rebar, steel, etc.)
• Secondary application - stainless steel and 1/16″ high tensile alloy
• Long life• High performance on ferrous metals
Part # SIZE HOLE MAX RPM
QT
362-228362-240
4 X .0407 X .040
5/87/8
15,0008,500
1010
www.cfisgroup.com Phone: 614-332-7464 70
Cutting Wheels
CFIS GAS / ELECT PORTABLE SAW WHEELS
Part# Size Qty.
362-272 14 x 1/8 x 20 mm EA
CFIS High Energy portable cut-off saw specifications are designed to be versatile performers on all types and sizes of metal and masonry materials. Utilizing a special bond system developed by Bullard engineers, these wheels out cut and out last competitors while offering excellent value on a price/performance ratio.
• Primary application - thin metals, roof, decking, car dismantling
• Premium wheel, formulated to prevent wheel breakdown caused by sharp, metal edges
• Specially treated aluminum oxide grain and hard bond
CFIS GAS / ELECT PORTABLE SAW WHEELS
Part# Size Qty.
362-266 14 x 1/8 x 1” EA
CFIS High Energy portable cut-off saw specifications are designed to be versatile performers on all types and sizes of metal and masonry materials. Utilizing a special bond system developed by Bullard engineers, these wheels out cut and out last competitors while offering excellent value on a price/performance ratio.
• Primary application - ferrous metals (structural steel, iron, rebar, etc.)
• Premium performance wheel formulated for longer life in most demanding jobs
• Treated aluminum oxide grains
www.cfisgroup.com Phone: 614-332-7464 71
Cutting Wheels
• FEATURES & BENEFITS
• Solid steel body maintains wheel diameter throughout its life and greatly reduces the danger of breakage.
• Vacuum brazed technology permanently bonds diamond crystals to the wheel, providing long blade life. Lasts up to 60 times longer than traditional abrasive wheels.
• Thin kerf design cuts faster and produces less dust and debris than traditional abrasive wheels.
• APPLICATIONS
• Metal studs, tubing and structural steel, stainless, non-ferrous, steel, rebar, cast iron and solids
METAL DEVIL ABRASIVE
CUT-OFF WHEELS
Using an innovative new process, diamond crystal is permanently brazed to the blade and remains fixed for continuous cutting throughout the life of the wheel.
Part # SIZE ARBOR QT362-235362-239362-243362-247362-250
4-1/26”
7”
12”
14
7/8-5/87/8-5/87/8-KO
1”-20MM1”-20MM
EaEaEaEaEa
www.cfisgroup.com Phone: 614-332-7464 72
Cutting Wheels
CFIS GAS / ELECT PORTABLE SAW WHEELS
Part# Size Qty.
362-275362-280362-265362-270
12 X 1/8 X 1”
12 x 1/8 x 20 mm14 x 1/8 x 1”
14 x 1/8 x 20 mm
EAEAEAEA
CFIS Lightning Wheels specifications offer industrial performance at a modest price. Manufactured in the USA, the quality and high-performance in both metal and concrete formulations exceed the performance of lower cost imports. A real value for the budget-minded buyer.
• Primary application - ferrous metals (structural steel, iron, rebar, etc.)
• A consistently performing wheel for a variety of cutting applications
• Aluminum oxide grains
CFIS GAS / ELECT PORTABLE SAW WHEELS
Part# Size Qty.
362-285362-295
12 X 1/8 X 1”
14 x 1/8 x 1”
EAEA
CFIS High Energy portable cut-off saw specifications are designed to be versatile performers on all types and sizes of metal and masonry materials. Utilizing a special bond system developed by Bullard engineers, these wheels out cut and out last competitors while offering excellent value on a price/performance ratio.
• Primary application - cured concrete, masonry, brick, block, and stone
• Premium wheel with hard bond• Silicon carbide grain
www.cfisgroup.com Phone: 614-332-7464 73
Cutting Wheels
CFIS GAS / ELECT PORTABLE SAW WHEELS
Part# Size Qty.
362-290 12 x 1/8 x 20 mm EA
CFIS Lightning specifications offer industrial performance at a modest price. Manufactured in the USA, the quality and high-performance in both metal and concrete formulations exceed the performance of lower cost imports. A real value for the budget-minded buyer.
• Primary application - cured concrete, masonry, brick, block, and stone
• Popular choice for masonry work• Silicon carbide grain
www.cfisgroup.com Phone: 614-332-7464 74
Cutting Wheels
CFIS PORTABLE CHOPCFIS PORTABLE CHOP-CFIS PORTABLE CHOP-SAW WHEELS
Part# Size Qty.
362-250362-255
12 x 3/32 x 1”
14 x 3/32 x 1”
EAEA
CFIS Lightning chop saw wheels are the most versatile wheels and offer great performance on all metals.
• Primary application - ferrous metals (structural steel, heavy rebar, channel, iron, angle iron, etc.)
• Fast cutting wheel on thicker profile materials such as angle iron, pipe, and rebar
• Consistent performance on a variety of cutting applications
CFIS CIRCULAR SAW WHEELS
Part# Size Qty.
362-224 7 x 3/32 x 5/8” EA
CFIS Lightning specifications offer industrial performance at a modest price. Manufactured quality and high performance in both metal and concrete formulations that exceed the performance of lower cost imports, yet only cost a fraction more. A real value for the budget-minded buyer.
• Primary application - ferrous metals (angle iron, rebar, steel, metal tubing, etc.)
• Harder bond for improved wheel life and increased performance
• Aluminum oxide grain
www.cfisgroup.com Phone: 614-332-7464 75
Wire BrushesColumbus Fleet Industrial Supply
Canton Fleet Industrial Supply
Canton First Aid & Safety
www.cfisgroup.com Phone: 614-332-7464 76
Wire Wheels
CFIS CABLE CRIMPED HIGH PERFORMANCE BRUSH
• 50 Percent longer life than standard crimped wire.
• High Performance and Flexibility
Applications:Removal of rust, paint or any kind of adherence.Cleaning of castings.Treating metallic surfaces, rubber, plastic, wood or glass.Metallic construction, ship-building, boiler industry, stone and concrete.
Part # DIAM ARBORWIRESIZE
MAX. SAFE
SPEEDQT
367-280 3” 5/8-11 & 14mm 12 x .009 13,000 Ea
Part # DIAMTRIM
LENGTH QT367-470 1” 1 3/16” Ea
Die Grinder / Drill
www.cfisgroup.com Phone: 614-332-7464 77
Wire Wheels
Diameter: 2-3/4”, 3-1/2”, 4”, 5”
Material: High Carbon Alloy
Max. RPM: 12,500
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Diameter: 2”, 3”
Material: High Carbon Alloy
Max. RPM: 7,000
Part # DIAM ARBORWIRESIZE
MAX. SAFESPEED QT
367-330367-334367-336367-340
2-3/43-1/2
4”
6”
5/8-115/8-115/8-115/8-11
.020
.020
.020
.020
7,0007,0007,0007,000
EaEaEaEa
Part # DIAM ARBORWIRESIZE
MAX. SAFE
SPEEDQT
367-303367-304367-306367-308
2-3/43-1/2
4”
5”
5/8-115/8-115/8-115/8-11
.020
.020
.020
.020
12,50012,50012,50012,500
EaEaEaEa
Large Crimped Wire Cup Brush
Large Knotted Wire Cup Brush
367-345 4” 5/8-11 .020 7,000 EaStainless Steel
www.cfisgroup.com Phone: 614-332-7464 78
Wire Wheels
Diameter: 3” , 4”
Material: High Carbon Alloy
Max. RPM: 20,000
Diameter: 2”, 3”
Material: Stainless Steel
Max. RPM: 15,000
Part # DIAM ARBORWIRESIZE
MAX. SAFESPEED QT
367-374367-380
4-1/25”
5/8-115/8-11
.020
.02015,00012,500
EaEa
Twist Knotted Wire Wheel Brush
Part # DIAM SHANKWIRESIZE
TRIMLENGTH
MAX. SAFESPEED QT
367-525367-530
3”
4”
1/4”
1/4”
.0140
.01401”
1”
25,00020,000
EaEa
Twist Knotted Wire Wheel Brush
Part # DIAM ARBORWIRESIZE
MAX. SAFESPEED QT
367-354367-355367-356
4”
4-1/2”
5”
5/8-115/8-115/8-11
.020
.020
.020
20,00020,00015,000
EaEaEa
Stringer Bead Twist Knotted Wire Wheel Brush
www.cfisgroup.com Phone: 614-332-7464 79
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Wire Wheels
Diameter: 1/2”, 3/4”, 1”
Material: High Carbon Alloy
Max. RPM: 20,000
Part # DIAMTRIM
LENGTH QT367-422367-424367-426
1/2”
3/4”
1”
1”
1”
1”
EaEaEa
Diameter: 3/4”, 1”
Material: .020 Tempered Steel
Max. RPM: 20,000
Part # DIAMTRIM
LENGTH QT367-400367-410
3/4”
1”
1-3/161-3/16
EaEa
367-410
367-400
www.cfisgroup.com Phone: 614-332-7464 80
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Wire Wheels
STAINLESS STEELDiameter: 3/4”, 1”
Material: Stainless Steel
Max. RPM: 20,000
Part # DIAMTRIM
LENGTH QT367-460367-462
3/4”
1”
1”
1”
EaEa
STAINLESS STEEL
Diameter: 1-3/4”, 2”, 2-1/2”
Material: High Carbon Alloy
Max. RPM: 20,000
Part # DIAMTRIM
LENGTHMATERIAL
QT367-428367-430367-435367-440367-464
1-3/4”
2”
2”
2-1/2”
1”
1”
1”
1”
1”
1”
STEELSTEEL
STAINLESSSTAINLESS
BRASS
EaEaEaEaEa
www.cfisgroup.com Phone: 614-332-7464 81
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Wire Wheels
Diameter: 3/4”, 1”, 1-1/4”
Material: .020 Tempered Steel
Max. RPM: 20,000
Part # DIAMTRIM
LENGTH QT367-444367-446367-448
3/4”
1”
1-1/4”
1”
1”
1”
EaEaEa
www.cfisgroup.com Phone: 614-332-7464 82
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Wire Wheels
Diameter: 1-1/2”, 2”, 2-1/2”, 3”
Material: High Carbon Alloy
Max. RPM: 15,000
Part # DIAMRPM
QT367-476367-480367-482367-484
1-1/2”
2”
2-1/2”
3”
20,00015,00015,00015,000
EaEaEaEa
STAINLESS STEELDiameter: 2”, 3”
Material: Stainless Steel
Max. RPM: 15,000
CFIS HIGH PERFORMANCE STAINLESS STEEL WIRE BRUSHES• UNIQUE HIGH TENSILE STAINLESS ALLOY WIRE: Stainless Steel alloy provides 20%
greater life than conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".
Part # DIAMRPM
QT367-490367-494
2”
3”
15,00015,000
EaEa
STAINLESS STEEL
www.cfisgroup.com Phone: 614-332-7464 83
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Wire Wheels
Diameter: 1-1/2”, 2”, 2-1/2”, 3”
Material: High Carbon Alloy
Max. RPM: 15,000
Part # DIAM WIRE MATERIAL QT367-552367-556367-560367-564367-568367-572367-576367-578367-582
3/81/21/25/85/83/41”
1-1/47/8
.003
.004
.006
.005
.008
.006
.006
.006
.006
CARBONSTAINLESS
CARBONCARBONCARBONCARBONCARBONCARBONCARBON
EaEaEaEaEaEaEaEaEa
Part # DIAM QT367-650367-652367-654367-656
3/41/21/25/8
EaEaEaEa
OVER ALL LENGTH 5-1/2”
Die Grinder
Drill
Welders Brush
Part # ITEM QT368-010368-012368-013368-015
S/S WELDERS BRUSHBRASS WELDERS BRUSHSTEEL WELDERS BRUSH
NYLON BLUE HANDLE
EaEaEaEa
www.cfisgroup.com Phone: 614-332-7464 84
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
Wire Wheels
Acid Brush
Part # ITEM QT368-018 ACID BRUSH Ea
Parts Brush
Part # ITEM QT368-030 PARTS BRUSH Ea
www.cfisgroup.com Phone: 614-332-7464 85
• 100% Pure White Bristle Chip Brushes• Smooth sanded wood handles and tin ferrules• Great utility brushes for general use.• Bristles are 1”, 1-1/2" and 2" wide
Part # ITEM QT368-120368-124368-128
1” wide
2” wide
3” wide
333
• Removes dirt and grease from motors, machinery and metal parts
• Polypropylene bristles hold up under repeated use in cleaning solvents
Chip Brush
• Heavy duty horsehair bristles handle everything from glue to oil to flux• Metal Tubular Handles• A good quality product• Perfect for Interior, Exterior, such as Glue, Acid, Flux, Oil, Paste, Pipe Dope, Soldering,
greasing, Touch-up, applying Zinc primer, Spreading, Dusting, Cleaning• Sturdy Durable Brushes
Wire Wheels
Part # ITEM QT368-004 SHOE HANDLE Ea
Part # ITEM QT
368-002 BRUSH WITHSCRAPER Ea
Wire Brushes
Part # ITEM QT368-006 .012 STAINLESS Ea
Wire Brushes
www.cfisgroup.com Phone: 614-332-7464 86
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.
• For removal of rust, dirt, scale, paint or welds from flat surfaces• Corrosion resistant stainless steel wire does not leave deposits that cause rust
on stainless steel, aluminum and other non ferrous metals• Ergonomic plastic handle• Wire Trim Length: 1-1/8-inch, Wire Diameter: 0.012-inch
• For removal of rust, dirt, scale, paint or welds from flat surfaces• Carbon Steel• Ergonomic plastic handle• Wire Trim Length: 1-1/8-inch, Wire Diameter: 0.014-inch
Part # ITEM QT368-008 .014 CARBON Ea
Wire Brushes
Wire Wheels
Part # SIZE ARBORNESTED
BUSHINGS GRITMAXRPM QTY
366-506 6” 1” 1/2, 5/8, 3/4, 1” HEAVY DUTY
4,138 Ea
366-515 8” 1-1/4” 1/2, 5/8, 3/4. 1” HEAVY DUTY
3,600 Ea
Grinding Wheels
Part # SIZE WIRE ARBOR WIDTHMAXRPM QT
Y366-557366-559
6”
6”
.014
.0141/2, 5/81/2, 5/8,
3/4” H/D
WIDE6.0006,000
EaEa
366-565 7” .014 1/2, 5/8, WIDE 6,000 Ea366-577366-579
8”
8”
.014
.0141/2, 5/8
1/2, 5/8,,3/4” H/D
WIDE4,5004,500
EaEa
Part # SIZE QTY366-540366-542366-544
1-1/4 x 1/2 ARBOR INSERT1-1/4 x5/8 ARBOR INSERT1-1/4 x3/4 ARBOR INSERT
SET (2)SET (2)SET (2)
366-548366-550
2” x 5/8 ARBOR INSERT
2” x 3/4 ARBOR INSERT
SET (2)SET (2)
Part # SIZE WIRE ARBOR WIDTHMAXRPM QTY
366-562 6” 12 1/2, 5/8 3/4” H/D 6.000 Ea366-582366-584
8”
8”
1612
1/2, 5/8,1/2, 5/8
3/4” H/D
3/4 H/D4,5004,500
EaEa
Crimped Wire Wheels
Twisted Wire Wheels
Wire Wheel Arbors
www.cfisgroup.com Phone: 614-332-7464 87
CFIS HIGH PERFORMANCE WIRE BRUSHES• UNIQUE HIGH TENSILE ALLOY WIRE: High carbon alloy provides 20% greater life than
conventional wire wheel brushes.• INCREASED WIRE FLEXIBILITY: Reduces wire fatigue, increases working life, and
decreases potential for wire "throw-out".• BRASS COATED WIRE: Prevents rust and corrosion for extended service life.