Connec&ng BT UK Analogue Phones to For&Voice 40 On cat5e wiring
Summary This guide aBempts to provide an overview of how to connect UK Analogue telephones to analogue port of a For&Voice 40 unit via exis&ng Cat5e wiring infrastructure. Parts involved 1. For&Voice 40 2. BT converse phone 1100 3. Standard BT RJ11 to BT socket cable supplied with BT phones in UK. 4. Rj11 to RJ45 cable 5. PABX master adapter (converts RJ45 to BT ) The current setup is using conven&onal Rj45 wiring to rig up analogue extensions . The setup intended to use exis&ng RJ45 cat5e wiring to deploy analogue phones. All descrip&ons are accurate as of wri&ng and based on direct experience.
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Wiring Schema&c
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Parts involved
For&voice 40 Analogue phone
RJ11 to BT cable (standard with phone)
PABX Master Item Code BT4504
RJ11 to RJ Cable
Amazon item code B00136UYOC hBp://goo.gl/S0HzKz
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Cables revisited
RJ11 to RJ45 Cable Amazon item code
B00136UYOC hBp://goo.gl/S0HzKz
PABX Master Item Code BT4504
RJ11 to BT cable (standard with phone)
Cable 1
PABX master
Cable 2
© anjanesh babu 07.11.2013
Connect FV40 to Cable 1
Used the RJ11 end of the cable 1 and plug this into the E1 socket on
FV40
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Connect Cable1 to patch panel
Used the RJ45 end of the cable 1 and plugged this into the patch
panel
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Plugged phone to cable 2
Use RJ11 end of the cable supplied with the BT converse 1100 phone.
Says ‘line’ on the socket
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Plugged cable2 to PABX adapter
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
PBAX Adapter into wall socket
© anjanesh babu 07.11.2013 h1p://www.ping1l.com
Completed Setup
PABX Master Item Code
RJ11 to BT cable (standard with phone)
BT Analogue phone
RJ45 Wall Socket
© anjanesh babu 07.11.2013 h1p://www.ping1l.com