Tool Holders, Drilling, Milling & CNC Accessories
Clamping Devices, Clamping Elements
All Products Catalogue 2016
Chucks for Production Machining & EDM
This catalogue has all the products that Abbott Toolfast offers with minor essential details.
For more details you may contact us for detailed catalogues or visit company websites.
C O N T E N T S
TOOLFAST is a registered trade mark of our company and all TOOLFAST
products are manufactured by us. Other products illustrated in this catalogue
are all world renowned products marketed by us in India.
Page - 14-15
Page - 16
.............................................................
..............................................
World Renowned Modular Vices
World Renowned Angle Heads And Other Products
Machining Centre Vices And Drill Grinding Machine Page - 17............................................
Milling And CNC Accessories Page - 18..................................................................................
Precision Micro Boring Heads And Sets Page - 19................................................................
Grinding, EDM Accessories and other GIN Products Page - 20-23...........................................
Drilling, Milling and CNC Accessories Page - 24-25...................................................................
Fixture Clamps And Pallets Page - 9-10.....................................................................................Vacmagic - Pallet Changer And Vacuum Chuck
Chucks For Production Machining, EDM and WIRECUT EDM Page - 26...........................
Clamping Devices And Clamping Elements Page - 4-7..........................................................
Wedge Clamps Page - 8........................................................................................................
Page - 11-12.......................................................................Milling And Grinding Accessories
Milling And Machining Center Vices Page - 13.......................................................................
This catalogue has all the products that Abbott Toolfast offers with minor essential details.
For more details you may contact us for detailed catalogues or visit company websites.
C O N T E N T S
TOOLFAST is a registered trade mark of our company and all TOOLFAST
products are manufactured by us. Other products illustrated in this catalogue
are all world renowned products marketed by us in India.
Page - 14-15
Page - 16
.............................................................
..............................................
World Renowned Modular Vices
World Renowned Angle Heads And Other Products
Machining Centre Vices And Drill Grinding Machine Page - 17............................................
Milling And CNC Accessories Page - 18..................................................................................
Precision Micro Boring Heads And Sets Page - 19................................................................
Grinding, EDM Accessories and other GIN Products Page - 20-23...........................................
Drilling, Milling and CNC Accessories Page - 24-25...................................................................
Fixture Clamps And Pallets Page - 9-10.....................................................................................Vacmagic - Pallet Changer And Vacuum Chuck
Chucks For Production Machining, EDM and WIRECUT EDM Page - 26...........................
Clamping Devices And Clamping Elements Page - 4-7..........................................................
Wedge Clamps Page - 8........................................................................................................
Page - 11-12.......................................................................Milling And Grinding Accessories
Milling And Machining Center Vices Page - 13.......................................................................
CLAMPING DEVICES AND CLAMPING ELEMENTS
USC-12(a)USC-12(b)USC-16(a)USC-16(b)USC-20(a)USC-20(b)USC-24(a)USC-24(b)
1214161820222428
0-60 0-60 0-80 0-80
0-100 0-100 0-120 0-120
MODELSUITABLE FOR T-SLOT SIZE
CLAMPING RANGE
UNIVERSAL STRAP CLAMP
For power presses, milling, drilling, shaping and boring. Supplied complete with
T-Bolt, Nut etc.
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied complete with T-Bolt or Stud and Nut etc.
MOULD CLAMP - WITH CLAMPING STUD
MC-12MC-16MC-20MC-24
0-350-400-500-60
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
HEIGHTRANGE
MOULD CLAMP - WITH T- BOLT
MC-12(a)MC-12(b)MC-16(a)MC-16(b)MC-20(a)MC-20(b)MC-24(a)MC-24(b)
1214161820222428
0-35 0-35 0-40 0-40 0-50 0-50 0-60 0-60
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP
TAPPED END CLAMP WITH ADJUSTABLE SUPPORT
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied only with threaded support.
TTUC-12TTUC-16TTUC-20TTUC-24
M-12M-16M-20M-24
SUITABLE FOR BOLTMODEL
110125160200
LENGTH
LOW HEIGHT PINCH CLAMP
For side clamping on VMC, milling, shaping, planning, jig boring etc.
MODEL
PC-1(a)PC-1(b)PC-2PC-3PC-4(a)PC-4(b)PC-5(a)PC-5(b)
1214161820222428
SUITABLE FOR T-SLOT SIZE
1515181824242424
CLAMP THICKNESS
TOTALLENGTH
115115145145180180180180
HEAVY DUTY PINCH CLAMP
For side clamping of thicker plates on VMC, milling, planning, plano-milling etc.
MODELSUITABLE FOR
T-SLOT SIZE
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)HDPC-3
1820222428
CLAMPTHICKNESS
3838383838
185185185185185
TOTALLENGTH
FORGED STRAP CLAMP WITH TAPPED END
Most suitable for mould clamping on Plastic Injection Moulding Machine.
Forged, Hardened & Tempered
TTFC -16 M-16
MODELSUITABLE FOR BOLT
152
TOTAL LENGTH
M -16
TAPPED END
Also available as Model TTFC-16S with threaded support TS-16 (M-16X70 Long).
'TOOLFAST' mould clamp is now available in forged steel body for extra strength.
MOULD CLAMP - WITH CLAMPING STUD
MCF-12MCF-16MCF-20MCF-24
0-350-500-650-75
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
RANGE
MOULD CLAMP - WITH T- BOLT
MCF-12(a)MCF-12(b)MCF-16(a)MCF-16(b)MCF-20(a)MCF-20(b)MCF-24(a)MCF-24(b)
1214161820222428
0-35 0-35 0-50 0-50 0-65 0-65 0-75 0-75
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP - FORGED
COMPACT MILLING CLAMP
The most multi-purpose, quick and easy to use down-hold milling clamp.
MODEL
CMC-12CMC-14CMC-16CMC-18
0-1250-1250-1250-125
CLAMPING HEIGHT RANGE
12141618
SUITABLE FOR
T-SLOT SIZE
1600kgs.1600kgs.1600kgs.1600kgs.
HEIGHT BLOCK FOR CMC CLAMP :
By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block modelHB-CMC-75 increases clamping height range by 75mm.
Height Block HB-CMC-75
New Forged
Steel Body
ST-PC-1AST-PC-1BST-PC-2ST-PC-3ST-PC-4AST-PC-4BST-PC-5AST-PC-5BST-HDPC-1AST-HDPC-1BST-HDPC-2AST-HDPC-2BST-HDPC-3
15151818242424243838383838
THICKNESSMODELSUITABLE
FOR PINCH CLAMP MODEL
PC-1(a)PC-1(b)
PC-2PC-3
PC-4(a)PC-4(b)PC-5(a)PC-5(b)
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)
HDPC-3
STOP FOR PINCH CLAMPS
PCS-1APCS-1BPCS-2PCS-3
12141618
55556666959595959595959595
TOTAL LENGTH
LOW HEIGHT PINCH CLAMP AND STOP WITH STEP
Stop For Above Pinch Clamp With Step
Low Height Pinch Clamp With Step
Stop or Stopper block to be mounted on the opposite side of workpiece while clamping with PC Series or HDPC series pinch clamps.
This is a new version of low height pinch clamp (PC Series) having step to support the workpiece above the machine table for through milling and drilling.
MINI PINCH CLAMP
For side clamping of thin plates on VMC, milling, shaping & planning.
MPC-1MPC-2MPC-3
141618
MODEL SUITABLE FOR T-SLOT SIZE
MODE
New
New
4
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
MODEL
ADJUSTABLE SUPPORT PLATES
TASP-250
TASP-2100
TASP-2150
TASP-L-250
TASP-L-2100
TASP-L-2150
50
100
150
50
100
150
MAXIMUM HEIGHT
For clamp support.
25 X 35
25 X 35
25 X 35
35 X 50
35 X 50
35 X 50
CLAMP RESTAREA
2
2
2
2
2
2
PLATETHICKNESS
THREADED SUPPORT FOR TAPPED END CLAMPS
These have large resting base and hexagon at bottom for
height adjustment.
STRAP CLAMP - FORGED BODY
M-12
M-16
M-20
M-24
120
140
180
220
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TSCF-12TSCF-16TSCF-20TSCF-24
Hardened & tempered, tapped end.
STRAP CLAMP Hardened & tempered, Black Finish based on IS:4292
MODEL
TSC-8-60TSC-10-80TSC-12-100TSC-12-125TSC-14-125TSC-16-125TSC-16-160TSC-20-160TSC-24-200TSC-30-250
M-8M-10M-12M-12M-14M-16M-16M-20M-24M-30
6080100125125125160160200250
SUITABLE FOR BOLT LENGTH
GOOSE NECK CLAMP- FORGED - TAPPED END
TGNCF-12TGNCF-16TGNCF-20TGNCF-24
M-12M-16M-20M-24
125125165200
MODEL SUITABLE FOR BOLT LENGTH
PLAIN CLAMP
M-12
M-16
70
90
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TES-12TES-16
Hardened & Tempered
These are economy models of strap clamps. Can be used where simple shape of a plain strap can serve the purpose.
STEPPED STRAP CLAMP Hardened & Tempered, Black Finish
To be used with step block.
TSSC-12-65TSSC-12-100TSSC-12-125TSSC-16-75TSSC-16-125TSSC-16-160TSSC-20-160TSSC-24-200
M-12M-12M-12M-16M-16M-16M-20M-24
6510012575
125160160200
MODEL SUITABLE FOR BOLT LENGTH
U - CLAMP Hardened & Tempered, black nish based on IS:4293
MODEL SUITABLE FOR BOLT LENGTH
TUC-12-160TUC-16-200TUC-20-250TUC-24-250
M-12M-16M-20M-24
160200250250
FINGER STRAP CLAMP
TCF -16 M-16
MODEL SUITABLE FOR BOLT
152
TOTAL LENGTH
Forged, Hardened & Tempered
CAM CLAMP Hold Down Type
Most ideal for quick Hold Down Clamping in xtures. Conventional Strap Clamps in
xtures can be replaced by these quick acting Cam clamps without much effort.
These clamps have high clamping force suitable for machining xtures.
MODEL CLAMPING BOLT HOLDING CAPACITY
TCC-10
TCC-12
M-10
M-12
1400 Kgs.
2000 Kgs.
TS-12TS-16TS-20TS-24
M-12 x 1.75 PM-16 x 2.0 PM-20 x 2.5 PM-24 x 3.0 P
60708085
30354050
DIA AT BOTTOM
THREAD SIZE
OVERALL LENGTH
MODEL
LEVELLING JACK - HEAVY DUTY
LEVELLING JACKS & HEIGHT BLOCKS
LEVELLING JACK
LJ-HD 160 230 FLAT 50Ø
MODELMIN.
HEIGHTMAX.
HEIGHTTYPE OF
TOP FACE
HEIGHT BLOCK FOR LEVELLING JACK
HBLJ-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
HIGHT BLOCK FOR LEVELLING JACK - HEAVY DUTY
HBLJ-HD-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
32Ø
SCREWTHREAD
LEVELLING JACK - HEAVY DUTY FLANGE MOUNTING
LJ-HD-FB 160 230 FLAT 50Ø
MODEL MIN.
HEIGHT MAX.
HEIGHTTYPE OF
TOP FACE
32Ø
SCREWTHREAD
MODEL
STEP BLOCKS
STEP BLOCK
TSB-1L
TSB-1
TSB-2L
TSB-2
TSB-3L
TSB-3
24
30
24
30
24
30
20
20
40
40
60
60
44
44
100
100
155
155
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
MODEL
STEP BLOCK - HEAVY DUTY
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
THSB-5THSB-6
4848
4072
100180
For clamp support.
MODEL
LJ-1(a)LJ-1(b)LJ-2LJ-3
75100120105
100150170155
FLAT 38ØFLAT 38ØCONICAL
‘V’
M-24M-24M-24M-24
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
5.05.05.05.0
MAX.LOAD TONS
8.0
MAX.LOAD TONS
8.0
2D / 3D CAD les available on request
SCREW JACK - HEAVY DUTY
MODEL
SJ-HD-1SJ-HD-2
250380
400660
FLAT 75ØFLAT 75Ø
40Ø40Ø
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
2525
5
HEIGHT
SUITABLE FOR T-SLOT SIZE
CLAMPING FORCE
CLAMPING DEVICES AND CLAMPING ELEMENTS
USC-12(a)USC-12(b)USC-16(a)USC-16(b)USC-20(a)USC-20(b)USC-24(a)USC-24(b)
1214161820222428
0-60 0-60 0-80 0-80
0-100 0-100 0-120 0-120
MODELSUITABLE FOR T-SLOT SIZE
CLAMPING RANGE
UNIVERSAL STRAP CLAMP
For power presses, milling, drilling, shaping and boring. Supplied complete with
T-Bolt, Nut etc.
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied complete with T-Bolt or Stud and Nut etc.
MOULD CLAMP - WITH CLAMPING STUD
MC-12MC-16MC-20MC-24
0-350-400-500-60
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
HEIGHTRANGE
MOULD CLAMP - WITH T- BOLT
MC-12(a)MC-12(b)MC-16(a)MC-16(b)MC-20(a)MC-20(b)MC-24(a)MC-24(b)
1214161820222428
0-35 0-35 0-40 0-40 0-50 0-50 0-60 0-60
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP
TAPPED END CLAMP WITH ADJUSTABLE SUPPORT
For mould clamping on plastic injection moulding & pressure die casting machines.
Supplied only with threaded support.
TTUC-12TTUC-16TTUC-20TTUC-24
M-12M-16M-20M-24
SUITABLE FOR BOLTMODEL
110125160200
LENGTH
LOW HEIGHT PINCH CLAMP
For side clamping on VMC, milling, shaping, planning, jig boring etc.
MODEL
PC-1(a)PC-1(b)PC-2PC-3PC-4(a)PC-4(b)PC-5(a)PC-5(b)
1214161820222428
SUITABLE FOR T-SLOT SIZE
1515181824242424
CLAMP THICKNESS
TOTALLENGTH
115115145145180180180180
HEAVY DUTY PINCH CLAMP
For side clamping of thicker plates on VMC, milling, planning, plano-milling etc.
MODELSUITABLE FOR
T-SLOT SIZE
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)HDPC-3
1820222428
CLAMPTHICKNESS
3838383838
185185185185185
TOTALLENGTH
FORGED STRAP CLAMP WITH TAPPED END
Most suitable for mould clamping on Plastic Injection Moulding Machine.
Forged, Hardened & Tempered
TTFC -16 M-16
MODELSUITABLE FOR BOLT
152
TOTAL LENGTH
M -16
TAPPED END
Also available as Model TTFC-16S with threaded support TS-16 (M-16X70 Long).
'TOOLFAST' mould clamp is now available in forged steel body for extra strength.
MOULD CLAMP - WITH CLAMPING STUD
MCF-12MCF-16MCF-20MCF-24
0-350-500-650-75
STUD M-12 x 1.75 x 100STUD M-16 x 2.0 x 125STUD M-20 x 2.5 x 175STUD M-24 x 3.0 x 200
MODEL DIA x PITCH x LENGTHCLAMPING
RANGE
MOULD CLAMP - WITH T- BOLT
MCF-12(a)MCF-12(b)MCF-16(a)MCF-16(b)MCF-20(a)MCF-20(b)MCF-24(a)MCF-24(b)
1214161820222428
0-35 0-35 0-50 0-50 0-65 0-65 0-75 0-75
CLAMPINGHEIGHTRANGE
MODELSUITABLE FOR
T-SLOT SIZE
MOULD CLAMP - FORGED
COMPACT MILLING CLAMP
The most multi-purpose, quick and easy to use down-hold milling clamp.
MODEL
CMC-12CMC-14CMC-16CMC-18
0-1250-1250-1250-125
CLAMPING HEIGHT RANGE
12141618
SUITABLE FOR
T-SLOT SIZE
1600kgs.1600kgs.1600kgs.1600kgs.
HEIGHT BLOCK FOR CMC CLAMP :
By stacking one Height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block modelHB-CMC-75 increases clamping height range by 75mm.
Height Block HB-CMC-75
New Forged
Steel Body
ST-PC-1AST-PC-1BST-PC-2ST-PC-3ST-PC-4AST-PC-4BST-PC-5AST-PC-5BST-HDPC-1AST-HDPC-1BST-HDPC-2AST-HDPC-2BST-HDPC-3
15151818242424243838383838
THICKNESSMODELSUITABLE
FOR PINCH CLAMP MODEL
PC-1(a)PC-1(b)
PC-2PC-3
PC-4(a)PC-4(b)PC-5(a)PC-5(b)
HDPC-1(a)HDPC-1(b)HDPC-2(a)HDPC-2(b)
HDPC-3
STOP FOR PINCH CLAMPS
PCS-1APCS-1BPCS-2PCS-3
12141618
55556666959595959595959595
TOTAL LENGTH
LOW HEIGHT PINCH CLAMP AND STOP WITH STEP
Stop For Above Pinch Clamp With Step
Low Height Pinch Clamp With Step
Stop or Stopper block to be mounted on the opposite side of workpiece while clamping with PC Series or HDPC series pinch clamps.
This is a new version of low height pinch clamp (PC Series) having step to support the workpiece above the machine table for through milling and drilling.
MINI PINCH CLAMP
For side clamping of thin plates on VMC, milling, shaping & planning.
MPC-1MPC-2MPC-3
141618
MODEL SUITABLE FOR T-SLOT SIZE
MODE
New
New
4
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
MODEL
ADJUSTABLE SUPPORT PLATES
TASP-250
TASP-2100
TASP-2150
TASP-L-250
TASP-L-2100
TASP-L-2150
50
100
150
50
100
150
MAXIMUM HEIGHT
For clamp support.
25 X 35
25 X 35
25 X 35
35 X 50
35 X 50
35 X 50
CLAMP RESTAREA
2
2
2
2
2
2
PLATETHICKNESS
THREADED SUPPORT FOR TAPPED END CLAMPS
These have large resting base and hexagon at bottom for
height adjustment.
STRAP CLAMP - FORGED BODY
M-12
M-16
M-20
M-24
120
140
180
220
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TSCF-12TSCF-16TSCF-20TSCF-24
Hardened & tempered, tapped end.
STRAP CLAMP Hardened & tempered, Black Finish based on IS:4292
MODEL
TSC-8-60TSC-10-80TSC-12-100TSC-12-125TSC-14-125TSC-16-125TSC-16-160TSC-20-160TSC-24-200TSC-30-250
M-8M-10M-12M-12M-14M-16M-16M-20M-24M-30
6080100125125125160160200250
SUITABLE FOR BOLT LENGTH
GOOSE NECK CLAMP- FORGED - TAPPED END
TGNCF-12TGNCF-16TGNCF-20TGNCF-24
M-12M-16M-20M-24
125125165200
MODEL SUITABLE FOR BOLT LENGTH
PLAIN CLAMP
M-12
M-16
70
90
MODEL SUITABLE FOR BOLT
TOTALLENGTH
TES-12TES-16
Hardened & Tempered
These are economy models of strap clamps. Can be used where simple shape of a plain strap can serve the purpose.
STEPPED STRAP CLAMP Hardened & Tempered, Black Finish
To be used with step block.
TSSC-12-65TSSC-12-100TSSC-12-125TSSC-16-75TSSC-16-125TSSC-16-160TSSC-20-160TSSC-24-200
M-12M-12M-12M-16M-16M-16M-20M-24
6510012575
125160160200
MODEL SUITABLE FOR BOLT LENGTH
U - CLAMP Hardened & Tempered, black nish based on IS:4293
MODEL SUITABLE FOR BOLT LENGTH
TUC-12-160TUC-16-200TUC-20-250TUC-24-250
M-12M-16M-20M-24
160200250250
FINGER STRAP CLAMP
TCF -16 M-16
MODEL SUITABLE FOR BOLT
152
TOTAL LENGTH
Forged, Hardened & Tempered
CAM CLAMP Hold Down Type
Most ideal for quick Hold Down Clamping in xtures. Conventional Strap Clamps in
xtures can be replaced by these quick acting Cam clamps without much effort.
These clamps have high clamping force suitable for machining xtures.
MODEL CLAMPING BOLT HOLDING CAPACITY
TCC-10
TCC-12
M-10
M-12
1400 Kgs.
2000 Kgs.
TS-12TS-16TS-20TS-24
M-12 x 1.75 PM-16 x 2.0 PM-20 x 2.5 PM-24 x 3.0 P
60708085
30354050
DIA AT BOTTOM
THREAD SIZE
OVERALL LENGTH
MODEL
LEVELLING JACK - HEAVY DUTY
LEVELLING JACKS & HEIGHT BLOCKS
LEVELLING JACK
LJ-HD 160 230 FLAT 50Ø
MODELMIN.
HEIGHTMAX.
HEIGHTTYPE OF
TOP FACE
HEIGHT BLOCK FOR LEVELLING JACK
HBLJ-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
HIGHT BLOCK FOR LEVELLING JACK - HEAVY DUTY
HBLJ-HD-75 75
MODELEFFECTIVE HEIGHT INCREASE
WITH ONE HEIGHT BLOCK
32Ø
SCREWTHREAD
LEVELLING JACK - HEAVY DUTY FLANGE MOUNTING
LJ-HD-FB 160 230 FLAT 50Ø
MODEL MIN.
HEIGHT MAX.
HEIGHTTYPE OF
TOP FACE
32Ø
SCREWTHREAD
MODEL
STEP BLOCKS
STEP BLOCK
TSB-1L
TSB-1
TSB-2L
TSB-2
TSB-3L
TSB-3
24
30
24
30
24
30
20
20
40
40
60
60
44
44
100
100
155
155
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
MODEL
STEP BLOCK - HEAVY DUTY
MAXIMUMMINIMUM
HEIGHT ADJUSTMENTWIDTH
THSB-5THSB-6
4848
4072
100180
For clamp support.
MODEL
LJ-1(a)LJ-1(b)LJ-2LJ-3
75100120105
100150170155
FLAT 38ØFLAT 38ØCONICAL
‘V’
M-24M-24M-24M-24
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
5.05.05.05.0
MAX.LOAD TONS
8.0
MAX.LOAD TONS
8.0
2D / 3D CAD les available on request
SCREW JACK - HEAVY DUTY
MODEL
SJ-HD-1SJ-HD-2
250380
400660
FLAT 75ØFLAT 75Ø
40Ø40Ø
MIN. HEIGHT
MAX. HEIGHT
TYPE OF TOP FACE
SCREWTHREAD
MAX.LOAD TONS
2525
5
HEIGHT
SUITABLE FOR T-SLOT SIZE
CLAMPING FORCE
MODEL THREAD SIZE TOTAL
LENGTH
These nuts have longer life as they have more number of threads than ordinary nuts.
EXTRA LONG NUT Hardened & Tempered, Black Finish
TELN-8
TELN-10
TELN-12
TELN-14
TELN-16
TELN-20
TELN-24
TELN-30
M-8
M-10
M-12
M-14
M-16
M-20
M-24
M-30
12
15
18
21
24
30
36
45
T-BOLT Forged Head, Hardened & Tempered, High Tensile Steel, Black Finish
MODEL LENGTHL
80
100
160
60
80
100
125
160
200
80
130
200
80
100
130
160
200
250
290
110
150
210
110
150
210
285
150
210
110
150
210
250
300
200
250
300
THREADSIZE
M12
M12
SUITABLE FOR
T-SLOT SIZE
12
14
TTB-1212-80
TTB-1212-100
TTB-1212-160
TTB-1214-60
TTB-1214-80
TTB-1214-100
TTB-1214-125
TTB-1214-160
TTB-1214-200
TTB-1616-80
TTB-1616-130
TTB-1616-200
TTB-1618-80
TTB-1618-100
TTB-1618-130
TTB-1618-160
TTB-1618-200
TTB-1618-250
TTB-1618-290
TTB-2020-110
TTB-2020-150
TTB-2020-210
TTB-2022-110
TTB-2022-150
TTB-2022-210
TTB-2022-285
TTB-2424-150
TTB-2424-210
TTB-2428-110
TTB-2428-150
TTB-2428-210
TTB-2428-250
TTB-2428-300
TTB-3036-200
TTB-3036-250
TTB-3036-300
SIZEE
18
22
M1616 25
M1618 28
M2020 32
M2022 35
M2424 40
M24 28 44
M3036 54
E
L
MODELTHREAD
SIZETOTAL
LENGTH
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
TCSB-12-100
TCSB-12-125
TCSB-12-150
TCSB-12-175
TCSB-16-125
TCSB-16-150
TCSB-16-175
TCSB-16-200
TCSB-20-150
TCSB-20-175
TCSB-20-200
TCSB-24-175
TCSB-24-200
TCSB-24-225
100
125
150
175
125
150
175
200
150
175
200
175
200
225
M-12
M-16
M-20
M-24
With hex key hole at top face for use on machine beds having tapped holes.
THREADLENGTH
30 X 40
30 X 50
30 X 65
30 X 80
40 X 50
40 X 65
40 X 80
40 X 100
50 X 60
50 X 70
50 X 80
60 X 70
60 X 80
60 X 90
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
For use with T-nuts.
MODELTHREAD
SIZETOTAL
LENGTHTHREADLENGTH
TCS-8-75
TCS-8-100
TCS-8-150
TCS-10-75
TCS-10-100
TCS-10-125
TCS-10-150
TCS-10-175
TCS-10-200
TCS-12-75
TCS-12-100
TCS-12-125
TCS-12-150
TCS-12-175
TCS-12-200
TCS-12-250
TCS-12-300
TCS-14-100
TCS-14-150
TCS-14-200
TCS-14-250
TCS-16-75
TCS-16-100
TCS-16-125
TCS-16-150
TCS-16-175
TCS-16-200
TCS-16-250
TCS-16-300
TCS-20-100
TCS-20-150
TCS-20-200
TCS-20-250
TCS-20-300
TCS-20-400
TCS-20-500
TCS-24-150
TCS-24-200
TCS-24-250
TCS-24-300
TCS-24-400
TCS-24-500
TCS-30-150
TCS-30-200
TCS-30-250
TCS-30-300
TCS-30-400
TCS-30-500
75
100
150
75
100
125
150
175
200
75
100
125
150
175
200
250
300
100
150
200
250
75
100
125
150
175
200
250
300
100
150
200
250
300
400
500
150
200
250
300
400
500
150
200
250
300
400
500
M-8
M-10
M-12
M-14
M-16
M-20
11 X 48
11 X 63
11 X 95
13 X 48
13 X 63
13 X 75
13 X 95
13 X 110
13 X 125
15 X 48
15 X 63
15 X 75
15 X 95
15 X 110
15 X 125
15 X 160
15 X 190
17 X 63
17 X 95
17 X 125
17 X 160
19 X 50
19 X 63
19 X 75
19 X 95
19 X 110
19 X 125
19 X 160
19 X 190
27 X 60
27 X 95
27 X 125
27 X 160
27 X 190
27 X 250
27 X 250
35 X 95
35 X 120
35 X 160
35 X 190
35 X 250
35 X 250
43 X 95
43 X 120
43 X 160
43 X 190
43 X 250
43 X 250
M-24
M-30
MODELTHREAD
SIZESUITABLE FOR T-SLOT SIZE
T- NUT Hardened & Tempered, Black Finish based on IS:2015
TTN-10-8
TTN-12-10*
TTN-14-10
TTN-14-12*
TTN-16-12
TTN-16-14*
TTN-18-12
TTN-18-16*
TTN-20-16
TTN-22-16
TTN-22-20*
TTN-24-20
TTN-28-24
TTN-36-24
TTN-36-30
10
12
14
14
16
16
18
18
20
22
22
24
28
36
36
15
18
22
22
25
25
28
28
32
35
35
40
44
54
54
M-8
M-10
M-10
M-12
M-12
M-14
M-12
M-16
M-16
M-16
M-20
M-20
M-24
M-24
M-30
S
SIZES
* marked models are not recommended for heavy duty use because of less wall
thickness outside the threading.
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
Knurled outside diameter for easy gripping while quick insertion or removal.
C-WASHER Case Hardened, Ground Faces, Black Finish
MODELSUITABLE
FOR BOLT
TCW-10TCW-12TCW-14TCW-16TCW-20TCW-24TCW-30
M-10M-12 M-14M-16M-20M-24M-30
based on IS : 4291
THICKNESS
991111111114
OUTSIDE
DIA
4048636380
100100
PLAIN WASHER Case Hardened, Black Finish based on IS : 4291
TPW-8TPW-10TPW-12TPW-14TPW-16TPW-20TPW-24TPW-30
M-8M-10M-12M-14M-16M-20M-24M-30
MODELSUITABLE FOR
BOLT
445677911
THICKNESSOUTSIDE
DIA
2328354045486070
Consists of :T-Nuts : 6 Nos.Clamping Studs of six different lengths : 4 Nos. eachFlanged Nuts : 6 Nos.Extension Nuts : 4 Nos.Stepped Strap Clamps of three different lengths : 2 Nos. each Step blocks of three different sizes : 2 pairs (4 Nos.) each
CLAMPING KIT - 58 PIECE with step blocks & stepped strap clamps
TCK-58-1412TCK-58-1612L
TCK-58-1210TCK-58-1410TCK-58-1412L
M-12M-12
M-10M-10M-12
1312
99
12
TCK-58-1612TCK-58-1812TCK-58-1816TCK-58-2016TCK-58-2216
1416
121414
1618182022
M-12M-12M-16M-16M-16
1313181819
MODEL SUITABLE FOR T-SLOT SIZE N.W. Kgs.
Also Included T-Slot
Cleaner FFFREE
CLAMPING KIT - 34 PIECE with adjustable support plates & strap clamps
141618
M-12M-12M-12
TCK-34-1412TCK-34-1612TCK-34-1812
MODEL SUITABLE FOR T-SLOT SIZE THREAD SIZE
Consists of :
T-Nuts : 4 nos.Clamping Studs of four different lengths : 4 nos. eachFlanged Nuts : 4 nos.Extension Nuts : 2 nos.Strap Clamps of two different lengths : 2 nos. eachAdjustable Support Plates of two different sizes : 2 nos. each
CMM CLAMPING KIT - 62 PIECE with Aluminum / plastic clamping elements
Specially designed for 3D coordinate measuring machine and other inspection and gaging applications.
Model CMMCK-62 consists of :
28 nos. Aluminum M-8 studs of different lengths upto 200mm long.8 nos. M-8 Aluminum anged nuts (Hand Tightening Type).6 nos. Aluminum alloy strap clamps.8 nos. Aluminum screw jacks.4 nos. Aluminum top rest pads for screw jacks.8 nos. Plastic bottom rest pads for screw jacks and studs.
Adaptor available on request for CMM’s with M-10 or M-12 threaded beds.
New
EXTENSION NUT Hardened & Tempered, Black Finish
These nuts are used to couple the studs with studs or T- bolts in order to increase their length.
TEN-8TEN-10TEN-12TEN-14TEN-16TEN-20TEN-24TEN-30
M-8M-10M-12 M-14M-16M-20M-24M-30
2430364248607290
MODEL THREAD SIZE TOTAL LENGTH
FLANGED NUT Forged, Hardened & Tempered, Black Finish
These nuts have anged face for larger face contact with the surface to be tightened on.
TFN-12TFN-16TFN-20TFN-24
18243036
M-12M-16M-20M-24
MODEL THREAD SIZE TOTAL
LENGTH
Also Included T-Slot
Cleaner FFFREE
Visit for online details of above products or write to us for a print copy www.toolfastclamps.com
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
7
THREAD SIZE
T-Slot size mentioned in these pages is size ‘A’ of the T-Slot as shown here.A
MODEL THREAD SIZE TOTAL
LENGTH
These nuts have longer life as they have more number of threads than ordinary nuts.
EXTRA LONG NUT Hardened & Tempered, Black Finish
TELN-8
TELN-10
TELN-12
TELN-14
TELN-16
TELN-20
TELN-24
TELN-30
M-8
M-10
M-12
M-14
M-16
M-20
M-24
M-30
12
15
18
21
24
30
36
45
T-BOLT Forged Head, Hardened & Tempered, High Tensile Steel, Black Finish
MODEL LENGTHL
80
100
160
60
80
100
125
160
200
80
130
200
80
100
130
160
200
250
290
110
150
210
110
150
210
285
150
210
110
150
210
250
300
200
250
300
THREADSIZE
M12
M12
SUITABLE FOR
T-SLOT SIZE
12
14
TTB-1212-80
TTB-1212-100
TTB-1212-160
TTB-1214-60
TTB-1214-80
TTB-1214-100
TTB-1214-125
TTB-1214-160
TTB-1214-200
TTB-1616-80
TTB-1616-130
TTB-1616-200
TTB-1618-80
TTB-1618-100
TTB-1618-130
TTB-1618-160
TTB-1618-200
TTB-1618-250
TTB-1618-290
TTB-2020-110
TTB-2020-150
TTB-2020-210
TTB-2022-110
TTB-2022-150
TTB-2022-210
TTB-2022-285
TTB-2424-150
TTB-2424-210
TTB-2428-110
TTB-2428-150
TTB-2428-210
TTB-2428-250
TTB-2428-300
TTB-3036-200
TTB-3036-250
TTB-3036-300
SIZEE
18
22
M1616 25
M1618 28
M2020 32
M2022 35
M2424 40
M24 28 44
M3036 54
E
L
MODELTHREAD
SIZETOTAL
LENGTH
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
TCSB-12-100
TCSB-12-125
TCSB-12-150
TCSB-12-175
TCSB-16-125
TCSB-16-150
TCSB-16-175
TCSB-16-200
TCSB-20-150
TCSB-20-175
TCSB-20-200
TCSB-24-175
TCSB-24-200
TCSB-24-225
100
125
150
175
125
150
175
200
150
175
200
175
200
225
M-12
M-16
M-20
M-24
With hex key hole at top face for use on machine beds having tapped holes.
THREADLENGTH
30 X 40
30 X 50
30 X 65
30 X 80
40 X 50
40 X 65
40 X 80
40 X 100
50 X 60
50 X 70
50 X 80
60 X 70
60 X 80
60 X 90
CLAMPING STUD Hardend & Tempered, High Tensile Steel, Black Finish
For use with T-nuts.
MODELTHREAD
SIZETOTAL
LENGTHTHREADLENGTH
TCS-8-75
TCS-8-100
TCS-8-150
TCS-10-75
TCS-10-100
TCS-10-125
TCS-10-150
TCS-10-175
TCS-10-200
TCS-12-75
TCS-12-100
TCS-12-125
TCS-12-150
TCS-12-175
TCS-12-200
TCS-12-250
TCS-12-300
TCS-14-100
TCS-14-150
TCS-14-200
TCS-14-250
TCS-16-75
TCS-16-100
TCS-16-125
TCS-16-150
TCS-16-175
TCS-16-200
TCS-16-250
TCS-16-300
TCS-20-100
TCS-20-150
TCS-20-200
TCS-20-250
TCS-20-300
TCS-20-400
TCS-20-500
TCS-24-150
TCS-24-200
TCS-24-250
TCS-24-300
TCS-24-400
TCS-24-500
TCS-30-150
TCS-30-200
TCS-30-250
TCS-30-300
TCS-30-400
TCS-30-500
75
100
150
75
100
125
150
175
200
75
100
125
150
175
200
250
300
100
150
200
250
75
100
125
150
175
200
250
300
100
150
200
250
300
400
500
150
200
250
300
400
500
150
200
250
300
400
500
M-8
M-10
M-12
M-14
M-16
M-20
11 X 48
11 X 63
11 X 95
13 X 48
13 X 63
13 X 75
13 X 95
13 X 110
13 X 125
15 X 48
15 X 63
15 X 75
15 X 95
15 X 110
15 X 125
15 X 160
15 X 190
17 X 63
17 X 95
17 X 125
17 X 160
19 X 50
19 X 63
19 X 75
19 X 95
19 X 110
19 X 125
19 X 160
19 X 190
27 X 60
27 X 95
27 X 125
27 X 160
27 X 190
27 X 250
27 X 250
35 X 95
35 X 120
35 X 160
35 X 190
35 X 250
35 X 250
43 X 95
43 X 120
43 X 160
43 X 190
43 X 250
43 X 250
M-24
M-30
MODELTHREAD
SIZESUITABLE FOR T-SLOT SIZE
T- NUT Hardened & Tempered, Black Finish based on IS:2015
TTN-10-8
TTN-12-10*
TTN-14-10
TTN-14-12*
TTN-16-12
TTN-16-14*
TTN-18-12
TTN-18-16*
TTN-20-16
TTN-22-16
TTN-22-20*
TTN-24-20
TTN-28-24
TTN-36-24
TTN-36-30
10
12
14
14
16
16
18
18
20
22
22
24
28
36
36
15
18
22
22
25
25
28
28
32
35
35
40
44
54
54
M-8
M-10
M-10
M-12
M-12
M-14
M-12
M-16
M-16
M-16
M-20
M-20
M-24
M-24
M-30
S
SIZES
* marked models are not recommended for heavy duty use because of less wall
thickness outside the threading.
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
Knurled outside diameter for easy gripping while quick insertion or removal.
C-WASHER Case Hardened, Ground Faces, Black Finish
MODELSUITABLE
FOR BOLT
TCW-10TCW-12TCW-14TCW-16TCW-20TCW-24TCW-30
M-10M-12 M-14M-16M-20M-24M-30
based on IS : 4291
THICKNESS
991111111114
OUTSIDE
DIA
4048636380
100100
PLAIN WASHER Case Hardened, Black Finish based on IS : 4291
TPW-8TPW-10TPW-12TPW-14TPW-16TPW-20TPW-24TPW-30
M-8M-10M-12M-14M-16M-20M-24M-30
MODELSUITABLE FOR
BOLT
445677911
THICKNESSOUTSIDE
DIA
2328354045486070
Consists of :T-Nuts : 6 Nos.Clamping Studs of six different lengths : 4 Nos. eachFlanged Nuts : 6 Nos.Extension Nuts : 4 Nos.Stepped Strap Clamps of three different lengths : 2 Nos. each Step blocks of three different sizes : 2 pairs (4 Nos.) each
CLAMPING KIT - 58 PIECE with step blocks & stepped strap clamps
TCK-58-1412TCK-58-1612L
TCK-58-1210TCK-58-1410TCK-58-1412L
M-12M-12
M-10M-10M-12
1312
99
12
TCK-58-1612TCK-58-1812TCK-58-1816TCK-58-2016TCK-58-2216
1416
121414
1618182022
M-12M-12M-16M-16M-16
1313181819
MODEL SUITABLE FOR T-SLOT SIZE N.W. Kgs.
Also Included T-Slot
Cleaner FFFREE
CLAMPING KIT - 34 PIECE with adjustable support plates & strap clamps
141618
M-12M-12M-12
TCK-34-1412TCK-34-1612TCK-34-1812
MODEL SUITABLE FOR T-SLOT SIZE THREAD SIZE
Consists of :
T-Nuts : 4 nos.Clamping Studs of four different lengths : 4 nos. eachFlanged Nuts : 4 nos.Extension Nuts : 2 nos.Strap Clamps of two different lengths : 2 nos. eachAdjustable Support Plates of two different sizes : 2 nos. each
CMM CLAMPING KIT - 62 PIECE with Aluminum / plastic clamping elements
Specially designed for 3D coordinate measuring machine and other inspection and gaging applications.
Model CMMCK-62 consists of :
28 nos. Aluminum M-8 studs of different lengths upto 200mm long.8 nos. M-8 Aluminum anged nuts (Hand Tightening Type).6 nos. Aluminum alloy strap clamps.8 nos. Aluminum screw jacks.4 nos. Aluminum top rest pads for screw jacks.8 nos. Plastic bottom rest pads for screw jacks and studs.
Adaptor available on request for CMM’s with M-10 or M-12 threaded beds.
New
EXTENSION NUT Hardened & Tempered, Black Finish
These nuts are used to couple the studs with studs or T- bolts in order to increase their length.
TEN-8TEN-10TEN-12TEN-14TEN-16TEN-20TEN-24TEN-30
M-8M-10M-12 M-14M-16M-20M-24M-30
2430364248607290
MODEL THREAD SIZE TOTAL LENGTH
FLANGED NUT Forged, Hardened & Tempered, Black Finish
These nuts have anged face for larger face contact with the surface to be tightened on.
TFN-12TFN-16TFN-20TFN-24
18243036
M-12M-16M-20M-24
MODEL THREAD SIZE TOTAL
LENGTH
Also Included T-Slot
Cleaner FFFREE
Visit for online details of above products or write to us for a print copy www.toolfastclamps.com
CLAMPS AND CLAMPING ELEMENTS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
7
THREAD SIZE
T-Slot size mentioned in these pages is size ‘A’ of the T-Slot as shown here.A
WEDGE CLAMPS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
WEDGE CLAMP - TWC SERIES Serrated Hardened Jaws
TWC-8
TWC-12
TWC-16
MODEL
M8
M12
M16
2500 Kgs
5000 Kgs
10000 Kgs
CLAMPING
FORCE
CLAMPING
SCREW
If your workpiece is suitable for clamping with 'TOOLFAST' Wedge clamps, our team can design and manufacture a multiple clamping xture for you as the one shown in the picture.
Please send in your enquiries with workpiece / machine table specications to us if you feel that 'TOOLFAST' wedge clamps are suitable for your workpiece or simply send your workpiece/ machine details to us and let us decide it.
MULTIPLE WORKPIECE CLAMPING FIXTURES WITH TWC SERIES WEDGE CLAMPS DESIGNED & MANUFACTURED BY TOOLFAST
FixtureBase Plate
Wedge Clamp
WorkpiecesUnusual Shape
Workpiece
Machinable Wedge Clamp
WEDGE CLAMP - RIGID BODY, HARDENED TOOL STEEL, DOWNWARD FORCE
‘TOOLFAST’ manufactures all models of wedge clamps with new patented design now in India.
¦ Patented design with bottom spring ensures downward Clamping force
¦ Hidden spring eliminates clogging of chips in spring coil
These have plain hardened jaws with added two tapped holes for attaching additional jaw inserts if need be.
WEDGE CLAMP - TWC-P SERIES Plain Hardened Jaws with Tapped Holes
TWC-8 P
TWC-12 P
TWC-16 P
M8
M12
M16
2500 Kgs
5000 Kgs
10000 Kgs
CLAMPING
FORCE
CLAMPING
SCREWMODEL
These have extra material on jaws (soft) to machine as per the workpiece shape enabling xturing of uneven or unusual shape work pieces.
WEDGE CLAMP - TWC-M SERIES Machinable Jaws
TWC-8 M
TWC-12 M
TWC-16 M
M8
M12
M16
2500 Kgs
5000 Kgs
10000 Kgs
CLAMPING
FORCE
CLAMPING
SCREW
• Model VTWC-16-60-350 available as standard having overall length 350mm capable of jaw opening 91mm in case of two workpieces.
• Above vice can be supplied in custom built lengths to suit different sizes of workpieces. Send your enquiries to us if you feel that 60mm jaw width vice can hold your workpiece. Additional xed jaws and TWC series clamps can be included in the vice if more than two workpieces to be clamped.
• For uneven or unusual shape workpieces, TWC-M and TWC-P series wedge clamps can also be used in above vice.
TOOLFAST offers a 60mm jaw width vice which is capable of clamping multiple workpieces. All parts such as TWC wedge clamp, xed jaws and the main body are modular and interchangeable.
MULTIPLE CLAMPING VICE WITH TWC-16 WEDGE CLAMPS
Wedge Clamp TWC-16
Workpieces
Adjustable PositionFixed Jaw
4 Nos. Mounting Clamps included
MODEL
New
2D / 3D CAD les available on request
98
PITBULL CLAMPS
The Pitbull Clamp is a revolutionary new xture clamp with positive down force and a low gripping prole. High vertical and horizontal clamping forces are generated, considering the size of the Pitbull Clamps. It uses a standard cap screw and an oil resistant O-ring. The Pitbull Clamp is available in 5 sizes and several styles, a tool steel knife edge for aggressive stock removal, a tool steel blunt edge for general purpose and a brass version to help prevent marring the workpiece.
Available in different models having clamping screw sizes from M-4 to M-12.
Fixture example of clamping by Pitbull Clamp
Workpiece
Pitbull Clamp
Clamping Screw
MACHINABLE FIXTURE CLAMPS
Also available 'Machinable Fixture Clamps' where the clamping portion has to be machined by the user as per the prole of the work piece to hold round or unusual shape parts.
MACHINABLE UNIFORCE CLAMPS
Also available 'Machinable Uniforce Clamps' with extra material on the clamping jaws so it can be machined by the user as per the prole of the work piece enabling to xture unusual applications easily.
The Cam Action Fixture Clamp is made up of two simple components : a hardened steel socket cap screw with an offset head and a hexagonal washer. This clamp is used for low prole side clamping.
q Low prole makes computer programming easier.q Cam action provides fast, strong clamping.q Small size allows more parts per load.q Simple design keeps cost low.
FIXTURE CLAMPS - ECCENTRIC TYPE
FIXTURE CLAMPS
Ask us for details of products before designing your xture or visit www.miteebite.com
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. MADE IN U.S.A.
UNIFORCE CLAMPS - WEDGE TYPE
The compact, economical Uniforce Clamp enables you to xture more parts on the machine table. The specially designed steel wedge spreads the clamping force uniformly on both sides of the channel Jaw. Ideal for clamping at or round work pieces in multiple set ups.
Cam action side clamping
Available in clamping screw sizes M-2 to M-16.
Available in screw sizes M- 4 to M-16
This adjustable low prole, cam action clamp provides clamping of different size work pieces merely by rotating the clamp to one of its other edges. The clamps are 10mm high and use M12 cam screw. Each of the six clamping surfaces is a different distance from the centerline by 1 mm. Therefore, one Series-9 Clamp can hold parts that vary up to 9.4mm simply by rotating the clamp to a different clamping surface.
q Serrated edges.q Heat treated and plated.
SERIES-9 CLAMPS
Each of the six clamping surfaces is number punched for identication and is at a different
distance from the centerline by 1 mm.
ID XPANSION CLAMP
TMThe ID Xpansion clamp is the ideal way to hold parts on an inside diameter for multiple machining on a vertical machining center or a horizontal machining center.These machinable clamps are produced in 8 sizes and can hold internal diameters from 8mm to over 75mm. The clamps use a heat treated tapered screw for expansion.The larger diameter of the clamp is held to a close tolerance for precision locating in a machined pocket on work cubes and xture plates.The customer machines the soft steel clamp to match the bore of the part ensuring proper t. Often times the clamps can be remachined for different size jobs.
Clamping by ID Expansion Clamp
on a multiple clamping xture
Available in different sizes to hold internal diameters from 8 mm to 103 mm.
COMPACT TOE CLAMPS
KNIFE EDGE CLAMPS
Knife Edge Clamps can be used instead of the above Fixture clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element.
Available in M-10, M-12 and M-16 screw sizes.
This cam action clamp provides positive down force while using very little space on a xture. Workspieces can be clamped in series by using the back surface of a clamp to locate the next workpiece. The hardened steel clamping element has both a smooth surface for machined workpieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the xture plate.
WEDGE CLAMPS
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
WEDGE CLAMP - TWC SERIES Serrated Hardened Jaws
TWC-8
TWC-12
TWC-16
MODEL
M8
M12
M16
2500 Kgs
5000 Kgs
10000 Kgs
CLAMPING
FORCE
CLAMPING
SCREW
If your workpiece is suitable for clamping with 'TOOLFAST' Wedge clamps, our team can design and manufacture a multiple clamping xture for you as the one shown in the picture.
Please send in your enquiries with workpiece / machine table specications to us if you feel that 'TOOLFAST' wedge clamps are suitable for your workpiece or simply send your workpiece/ machine details to us and let us decide it.
MULTIPLE WORKPIECE CLAMPING FIXTURES WITH TWC SERIES WEDGE CLAMPS DESIGNED & MANUFACTURED BY TOOLFAST
FixtureBase Plate
Wedge Clamp
WorkpiecesUnusual Shape
Workpiece
Machinable Wedge Clamp
WEDGE CLAMP - RIGID BODY, HARDENED TOOL STEEL, DOWNWARD FORCE
‘TOOLFAST’ manufactures all models of wedge clamps with new patented design now in India.
¦ Patented design with bottom spring ensures downward Clamping force
¦ Hidden spring eliminates clogging of chips in spring coil
These have plain hardened jaws with added two tapped holes for attaching additional jaw inserts if need be.
WEDGE CLAMP - TWC-P SERIES Plain Hardened Jaws with Tapped Holes
TWC-8 P
TWC-12 P
TWC-16 P
M8
M12
M16
2500 Kgs
5000 Kgs
10000 Kgs
CLAMPING
FORCE
CLAMPING
SCREWMODEL
These have extra material on jaws (soft) to machine as per the workpiece shape enabling xturing of uneven or unusual shape work pieces.
WEDGE CLAMP - TWC-M SERIES Machinable Jaws
TWC-8 M
TWC-12 M
TWC-16 M
M8
M12
M16
2500 Kgs
5000 Kgs
10000 Kgs
CLAMPING
FORCE
CLAMPING
SCREW
• Model VTWC-16-60-350 available as standard having overall length 350mm capable of jaw opening 91mm in case of two workpieces.
• Above vice can be supplied in custom built lengths to suit different sizes of workpieces. Send your enquiries to us if you feel that 60mm jaw width vice can hold your workpiece. Additional xed jaws and TWC series clamps can be included in the vice if more than two workpieces to be clamped.
• For uneven or unusual shape workpieces, TWC-M and TWC-P series wedge clamps can also be used in above vice.
TOOLFAST offers a 60mm jaw width vice which is capable of clamping multiple workpieces. All parts such as TWC wedge clamp, xed jaws and the main body are modular and interchangeable.
MULTIPLE CLAMPING VICE WITH TWC-16 WEDGE CLAMPS
Wedge Clamp TWC-16
Workpieces
Adjustable PositionFixed Jaw
4 Nos. Mounting Clamps included
MODEL
New
2D / 3D CAD les available on request
98
PITBULL CLAMPS
The Pitbull Clamp is a revolutionary new xture clamp with positive down force and a low gripping prole. High vertical and horizontal clamping forces are generated, considering the size of the Pitbull Clamps. It uses a standard cap screw and an oil resistant O-ring. The Pitbull Clamp is available in 5 sizes and several styles, a tool steel knife edge for aggressive stock removal, a tool steel blunt edge for general purpose and a brass version to help prevent marring the workpiece.
Available in different models having clamping screw sizes from M-4 to M-12.
Fixture example of clamping by Pitbull Clamp
Workpiece
Pitbull Clamp
Clamping Screw
MACHINABLE FIXTURE CLAMPS
Also available 'Machinable Fixture Clamps' where the clamping portion has to be machined by the user as per the prole of the work piece to hold round or unusual shape parts.
MACHINABLE UNIFORCE CLAMPS
Also available 'Machinable Uniforce Clamps' with extra material on the clamping jaws so it can be machined by the user as per the prole of the work piece enabling to xture unusual applications easily.
The Cam Action Fixture Clamp is made up of two simple components : a hardened steel socket cap screw with an offset head and a hexagonal washer. This clamp is used for low prole side clamping.
q Low prole makes computer programming easier.q Cam action provides fast, strong clamping.q Small size allows more parts per load.q Simple design keeps cost low.
FIXTURE CLAMPS - ECCENTRIC TYPE
FIXTURE CLAMPS
Ask us for details of products before designing your xture or visit www.miteebite.com
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. MADE IN U.S.A.
UNIFORCE CLAMPS - WEDGE TYPE
The compact, economical Uniforce Clamp enables you to xture more parts on the machine table. The specially designed steel wedge spreads the clamping force uniformly on both sides of the channel Jaw. Ideal for clamping at or round work pieces in multiple set ups.
Cam action side clamping
Available in clamping screw sizes M-2 to M-16.
Available in screw sizes M- 4 to M-16
This adjustable low prole, cam action clamp provides clamping of different size work pieces merely by rotating the clamp to one of its other edges. The clamps are 10mm high and use M12 cam screw. Each of the six clamping surfaces is a different distance from the centerline by 1 mm. Therefore, one Series-9 Clamp can hold parts that vary up to 9.4mm simply by rotating the clamp to a different clamping surface.
q Serrated edges.q Heat treated and plated.
SERIES-9 CLAMPS
Each of the six clamping surfaces is number punched for identication and is at a different
distance from the centerline by 1 mm.
ID XPANSION CLAMP
TMThe ID Xpansion clamp is the ideal way to hold parts on an inside diameter for multiple machining on a vertical machining center or a horizontal machining center.These machinable clamps are produced in 8 sizes and can hold internal diameters from 8mm to over 75mm. The clamps use a heat treated tapered screw for expansion.The larger diameter of the clamp is held to a close tolerance for precision locating in a machined pocket on work cubes and xture plates.The customer machines the soft steel clamp to match the bore of the part ensuring proper t. Often times the clamps can be remachined for different size jobs.
Clamping by ID Expansion Clamp
on a multiple clamping xture
Available in different sizes to hold internal diameters from 8 mm to 103 mm.
COMPACT TOE CLAMPS
KNIFE EDGE CLAMPS
Knife Edge Clamps can be used instead of the above Fixture clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element.
Available in M-10, M-12 and M-16 screw sizes.
This cam action clamp provides positive down force while using very little space on a xture. Workspieces can be clamped in series by using the back surface of a clamp to locate the next workpiece. The hardened steel clamping element has both a smooth surface for machined workpieces and a serrated clamping surface for rougher work. The height of the clamp can be adjusted by milling the slot deeper in the xture plate.
VACMAGIC - PALLET CHANGER & VACUUM CHUCK
USES STANDARD SHOP AIR, NO VACUUM PUMP REQUIRED
Low prole base unit quickly mounts to 2machine table. Operates with 5 Kg/cm
standard shop air.
Vacuum pallet with rubber cord positioned on base unit for thin
workpiece ready to be used as a vacuum chuck.
Example of standard pallet machined into a xture plate positioned on base
unit for increased production.
Vise mounted on standard pallet positioned on base unit for quick change from production to prototype.
VACUUM CHUCK APPLICATION PALLET CHANGER APPLICATION
Ask us for details of products before designing your xture or visit www.miteebite.com
T-SLOT CLAMP KITS (SIDE CLAMPING)
VISE PALLETS
The original MITEE-BITE T-Slot Clamp combines the unique cam action brass clamping element with a T-nut.
q L ocks in machine T-slot for low prole clamping q Makes fast set-ups possible right on the machine tableq Brass hex follows contour of unusual shaped parts q Packed in complete kits
PART NO. CAM SCREWT-SLOT SIZE
50644 10mm M6
50646 12mm M8
50648 14mm M10
50650 16mm M12
50652 18mm M12
TM TMTALONGRIP AND VERSAGRIP VISE JAWS
Reduce set up times and increase efciency on small production jobs. The pallets can be reused for repeat jobs.
q N ow you can run xture jobs without removing your vises.
q T hese Vise Pallets are designed to t in all 150mm vises and measure approximately 152 x 203mm and 152 x 254mm. They are available blank and with 10mm T-slots.
q T he Blank Pallets are ideal for multiple small parts using one of several MITEE-BITE low prole edge clamps.
q T he T-Slot Pallets can be used with our T-Slot Clamps or the versatile 10mm Riser Kit (#51088) for non-dedicated applications.
q T he Vise Pallets are qualied in 2 places so they can rest on parallels or on the top of the jaws.
The Mitee-Bite Kit Contains: 4 Mitee-Bite T-Nuts 6 Mitee-Bite Fixture Clamps 2 Hex Keys
MITEE-BITE Products introduces a new and innovative product that will increase the functionality of your standard 4 and 6 inch
TM(100mm and 150mm) vises . TalonGrip is a simple bolt on system that will allow you to perform aggressive machining operations while clamping on as little as 1.5mm. Ideal for small lot sizes, difcult applications or proto-type work when building a xture would not be benecial.
VersaGripTM, as the name implies, offers the versatility of clamping standard vise work as well as providing a solution for difcult applications that would normally require xturing or machining soft-jaws. By simply replacing your current jaws with the VersaGripTM system you can securely hold odd shaped parts while machining at speeds and feeds you never thought possible.
TALONGRIP VISE JAWS VERSAGRIP VISE JAWS
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. MADE IN U.S.A.
CLAMPS AND PALLETS
PRECISION SINE VICE
‘TOOLFAST’ Precision Sine Vice is used to obtain precise angles by means of gauge blocks. Apart from its use on milling and grinding machine, this Sine Vice can also be used as a reference for inspection.
A ll Hardened & Tempered to 52 - 56 HRC.All side Parallelism & Squareness within ± 0.005mm.
Centre distance of rollers within ± 0.005mm.Inspection certicate is furnished.
Chart for setting sine angles with the help of gauge blocks is provided.
PRECISION STEEL PARALLELS
‘TOOLFAST’ Steel Parallels are used as precision packing supports under jobs or xtures. Made from tool steel, hardened, tempered & precision ground in matched pairs. Matched pairs are marked with identical serial numbers. All sides are chamfered. Overall sizes are nominal.
Hardened & Tempered 52 - 56 HRC.Parallelism within 0.005mm upto 200mm length.Inspection certicate is furnished.
MODEL
EF-S1
EF-D1
EFR-10
EFR-104
SHANK DIA
10
10
10
10
TIP DIA
10
5 &10
10
4 & 10
TYPE
Edge Finder-single end
Edge Finder-double end
Edge Finder-disc type
Disc Type - double end
‘TOOLFAST’ Grinding Vice - screw type is a precision machine vice. Body & jaw made of tool steel, hardened, tempered & precision ground.
Hardened & Tempered to 52 - 56 HRC.
All sides Parallelism & Squareness within ± 0.005mm.
Inspection certicate is furnished.
GRINDING VICE - SCREW TYPE
MILLING & GRINDING ACCESSORIES
MODEL SIZE
10 x 20 x 150
15 x 35 x 150
20 x 45 x 200
25 x 55 x 250
30 x 60 x 300
45 x 75 x 300
TSP-20
TSP-35
TSP-45
TSP-55
TSP-60
TSP-75
MODEL JAW DEPTH MAX. JAW OPENINGJAW WIDTH
637388
100125150
323540455050
GV-65GV-75GV-90GV-100GV-125GV-150
85100125125158175
OVERALL LENGTH OVERALL HEIGHT
190210250260300315
65748895110110
MODEL JAW DEPTHJAW WIDTH
PSV-2
PSV-3
PSV-4
50
73
100
25
35
45
65
100
125
MAX. JAW OPENING
OVERALLLENGTH
OVERALLHEIGHT
140
190
245
80
104
134
EF-D1 EF-S1 EFR-10 EFR-104
EDGE FINDER
TOOLFAST’ Edge Finder is used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling or jig boring machine tables.
Application: Edge nder is used for location of edges, shoulders, grooves etc. of work pieces kept on machine table with respect to the machine spindle. Shank of the Edge Finder is held in the collet or chuck and work table is traversed to cause the rotating tip of the edge nder make contact with the edge of the work piece to be located. Once the rotating tip comes in contact with the work piece, work table is further traversed so that the rotating tip shifts to a concentric position with respect to the shank. Now any movement to "off centre" will cause a distinct 'wobble'. At this point, the distance from the work edge to the centre of machine spindle is equal to half the diameter of the tip of the edge nder. Available in single & double ended tip. In double ended tip, Edge Finder can be held from both ends and both the tips of two different sizes can be used for edge nding.
Shank and tip of the edge nder are coupled together with the help of an internal spring for independent rotation of both. It is hardened and accurately ground all over to ensure repeatability of work location within 0.01 mm.
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
1110
qqq
q
q
q
q
qqq
VACMAGIC - PALLET CHANGER & VACUUM CHUCK
USES STANDARD SHOP AIR, NO VACUUM PUMP REQUIRED
Low prole base unit quickly mounts to 2machine table. Operates with 5 Kg/cm
standard shop air.
Vacuum pallet with rubber cord positioned on base unit for thin
workpiece ready to be used as a vacuum chuck.
Example of standard pallet machined into a xture plate positioned on base
unit for increased production.
Vise mounted on standard pallet positioned on base unit for quick change from production to prototype.
VACUUM CHUCK APPLICATION PALLET CHANGER APPLICATION
Ask us for details of products before designing your xture or visit www.miteebite.com
T-SLOT CLAMP KITS (SIDE CLAMPING)
VISE PALLETS
The original MITEE-BITE T-Slot Clamp combines the unique cam action brass clamping element with a T-nut.
q L ocks in machine T-slot for low prole clamping q Makes fast set-ups possible right on the machine tableq Brass hex follows contour of unusual shaped parts q Packed in complete kits
PART NO. CAM SCREWT-SLOT SIZE
50644 10mm M6
50646 12mm M8
50648 14mm M10
50650 16mm M12
50652 18mm M12
TM TMTALONGRIP AND VERSAGRIP VISE JAWS
Reduce set up times and increase efciency on small production jobs. The pallets can be reused for repeat jobs.
q N ow you can run xture jobs without removing your vises.
q T hese Vise Pallets are designed to t in all 150mm vises and measure approximately 152 x 203mm and 152 x 254mm. They are available blank and with 10mm T-slots.
q T he Blank Pallets are ideal for multiple small parts using one of several MITEE-BITE low prole edge clamps.
q T he T-Slot Pallets can be used with our T-Slot Clamps or the versatile 10mm Riser Kit (#51088) for non-dedicated applications.
q T he Vise Pallets are qualied in 2 places so they can rest on parallels or on the top of the jaws.
The Mitee-Bite Kit Contains: 4 Mitee-Bite T-Nuts 6 Mitee-Bite Fixture Clamps 2 Hex Keys
MITEE-BITE Products introduces a new and innovative product that will increase the functionality of your standard 4 and 6 inch
TM(100mm and 150mm) vises . TalonGrip is a simple bolt on system that will allow you to perform aggressive machining operations while clamping on as little as 1.5mm. Ideal for small lot sizes, difcult applications or proto-type work when building a xture would not be benecial.
VersaGripTM, as the name implies, offers the versatility of clamping standard vise work as well as providing a solution for difcult applications that would normally require xturing or machining soft-jaws. By simply replacing your current jaws with the VersaGripTM system you can securely hold odd shaped parts while machining at speeds and feeds you never thought possible.
TALONGRIP VISE JAWS VERSAGRIP VISE JAWS
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. MADE IN U.S.A.
CLAMPS AND PALLETS
PRECISION SINE VICE
‘TOOLFAST’ Precision Sine Vice is used to obtain precise angles by means of gauge blocks. Apart from its use on milling and grinding machine, this Sine Vice can also be used as a reference for inspection.
A ll Hardened & Tempered to 52 - 56 HRC.All side Parallelism & Squareness within ± 0.005mm.
Centre distance of rollers within ± 0.005mm.Inspection certicate is furnished.
Chart for setting sine angles with the help of gauge blocks is provided.
PRECISION STEEL PARALLELS
‘TOOLFAST’ Steel Parallels are used as precision packing supports under jobs or xtures. Made from tool steel, hardened, tempered & precision ground in matched pairs. Matched pairs are marked with identical serial numbers. All sides are chamfered. Overall sizes are nominal.
Hardened & Tempered 52 - 56 HRC.Parallelism within 0.005mm upto 200mm length.Inspection certicate is furnished.
MODEL
EF-S1
EF-D1
EFR-10
EFR-104
SHANK DIA
10
10
10
10
TIP DIA
10
5 &10
10
4 & 10
TYPE
Edge Finder-single end
Edge Finder-double end
Edge Finder-disc type
Disc Type - double end
‘TOOLFAST’ Grinding Vice - screw type is a precision machine vice. Body & jaw made of tool steel, hardened, tempered & precision ground.
Hardened & Tempered to 52 - 56 HRC.
All sides Parallelism & Squareness within ± 0.005mm.
Inspection certicate is furnished.
GRINDING VICE - SCREW TYPE
MILLING & GRINDING ACCESSORIES
MODEL SIZE
10 x 20 x 150
15 x 35 x 150
20 x 45 x 200
25 x 55 x 250
30 x 60 x 300
45 x 75 x 300
TSP-20
TSP-35
TSP-45
TSP-55
TSP-60
TSP-75
MODEL JAW DEPTH MAX. JAW OPENINGJAW WIDTH
637388
100125150
323540455050
GV-65GV-75GV-90GV-100GV-125GV-150
85100125125158175
OVERALL LENGTH OVERALL HEIGHT
190210250260300315
65748895110110
MODEL JAW DEPTHJAW WIDTH
PSV-2
PSV-3
PSV-4
50
73
100
25
35
45
65
100
125
MAX. JAW OPENING
OVERALLLENGTH
OVERALLHEIGHT
140
190
245
80
104
134
EF-D1 EF-S1 EFR-10 EFR-104
EDGE FINDER
TOOLFAST’ Edge Finder is used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling or jig boring machine tables.
Application: Edge nder is used for location of edges, shoulders, grooves etc. of work pieces kept on machine table with respect to the machine spindle. Shank of the Edge Finder is held in the collet or chuck and work table is traversed to cause the rotating tip of the edge nder make contact with the edge of the work piece to be located. Once the rotating tip comes in contact with the work piece, work table is further traversed so that the rotating tip shifts to a concentric position with respect to the shank. Now any movement to "off centre" will cause a distinct 'wobble'. At this point, the distance from the work edge to the centre of machine spindle is equal to half the diameter of the tip of the edge nder. Available in single & double ended tip. In double ended tip, Edge Finder can be held from both ends and both the tips of two different sizes can be used for edge nding.
Shank and tip of the edge nder are coupled together with the help of an internal spring for independent rotation of both. It is hardened and accurately ground all over to ensure repeatability of work location within 0.01 mm.
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
1110
qqq
q
q
q
q
qqq
STEEL V-BLOCK
‘TOOLFAST’ Steel V-Blocks are made of tool steel, hardened, tempered & precision ground on all sides. These are supplied in matched pairs having both sides ‘V’ with one clamp.
Unbreakable Steel Clamp. All Hardened & Tempered 52 - 56 HRC.Parallelism & Squareness of all faces & 'V' within ± 0.005mm.
q Inspection certicate is furnished.
PRECISION COMPOUND SINE VICE - SCREW TYPE
C. I. ANGLE PLATE - SLOTTED
Sizes APS-110 to APS-200 are in open ends type as shown in picture.Sizes APS-225 to APS-300 are in webbed ends type .
‘TOOLFAST’ C. I. Angle Plate-Slotted is made out of high quality seasoned casting having precision ground outside faces & ends. Machined slots for clamping on both faces.
Accuracy in parallelism & squareness within ± 0.01mm per 200 mm length. Inspection certicate is furnished.
MAGNETIC V-BLOCK
‘TOOLFAST’ Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately tted
magnet ensures easy movement of knob. Available in single as well as matched pairs. These V-blocks have main holding 'V' and bottom face tted with hardened steel plates having hardness
52-56 HRC.
q P arallelism & Squareness of all faces & 'V' within ± 0 .005mm.q M ost suitable for inspection and tool room applications.q Inspection certicate is furnished.
Grinding Accessories
LENGTH
SVB-50SVB-80SVB-100SVB-125SVB-150
5080
100125150
3760759598
3760759598
WIDTH
MODEL LENGTH HEIGHT
MVB-4-HMVB-6-H
100150
9595
7575
WIDTH
MODEL SIZE
APS-110APS-150APS-175APS-200APS-225APS-250APS-300
110 x 85 x 75150 x 125 x 110175 x 135 x 110200 x 150 x 125225 x 175 x 150250 x 200 x 150300 x 225 x 200
‘TOOLFAST’ Precision compound Sine Vice has compound sine angle setting on two sine plates. Both the tiltings are controlled by ne screws.
All Hardened & Tempered to 52 - 56 HRC.All side Parallelism & Squareness within ± 0.005mm.Centre distance of rollers within ± 0.005mm.Inspection certicate is furnished.
Charts for setting both sine angles with the help of gauge blocks is provided.
MODEL JAW DEPTHJAW WIDTH
CSGV-3
MAX. JAW OPENING
OVERALLLENGTH
OVERALLHEIGHT
HOLDING CAPACITY
Ø MAX
3560759095
75 30 76 160 124
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
New
Milling & MC Vices
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
1312
MODEL HEIGHT
qqq
qqqq
OPTIONAL ACCESSORIES
OPTIONAL JAWS FOR MMV-6HXL
SWIVAL BASE:Available separately for all above three sizes of vice.
SERRATED JAW PLATE
Dimensions same as standard plain Jaw but having serrations for extra grip.
MACHINABLE JAW PLATE
• Extra thick (40mm) for carving part shapes into jaw plate.
• Reversible top to bottom and front to back, (counter bore both sides).
• Available in Aluminium and steel both.
V-JAW PLATE
* Required torque can be achieved by tightening handle included with vice. Applying extra torque by using extension pipe or by hammering damages the vice parts and warranty expires.
JAWWIDTH
JAWDEPTH
N.W.WITHOUTSWIVAL
BASE Kgs.
CLAMPING FORCE
Max.
TIGHTENINGTORQUE Nm Max.*
150
580
650
2000 Kgs.
3500 Kgs.
4000 Kgs.
STEEL V-BLOCK
‘TOOLFAST’ Steel V-Blocks are made of tool steel, hardened, tempered & precision ground on all sides. These are supplied in matched pairs having both sides ‘V’ with one clamp.
Unbreakable Steel Clamp. All Hardened & Tempered 52 - 56 HRC.Parallelism & Squareness of all faces & 'V' within ± 0.005mm.
q Inspection certicate is furnished.
PRECISION COMPOUND SINE VICE - SCREW TYPE
C. I. ANGLE PLATE - SLOTTED
Sizes APS-110 to APS-200 are in open ends type as shown in picture.Sizes APS-225 to APS-300 are in webbed ends type .
‘TOOLFAST’ C. I. Angle Plate-Slotted is made out of high quality seasoned casting having precision ground outside faces & ends. Machined slots for clamping on both faces.
Accuracy in parallelism & squareness within ± 0.01mm per 200 mm length. Inspection certicate is furnished.
MAGNETIC V-BLOCK
‘TOOLFAST’ Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately tted
magnet ensures easy movement of knob. Available in single as well as matched pairs. These V-blocks have main holding 'V' and bottom face tted with hardened steel plates having hardness
52-56 HRC.
q P arallelism & Squareness of all faces & 'V' within ± 0 .005mm.q M ost suitable for inspection and tool room applications.q Inspection certicate is furnished.
Grinding Accessories
LENGTH
SVB-50SVB-80SVB-100SVB-125SVB-150
5080100125150
3760759598
3760759598
WIDTH
MODEL LENGTH HEIGHT
MVB-4-HMVB-6-H
100150
9595
7575
WIDTH
MODEL SIZE
APS-110APS-150APS-175APS-200APS-225APS-250APS-300
110 x 85 x 75150 x 125 x 110175 x 135 x 110200 x 150 x 125225 x 175 x 150250 x 200 x 150300 x 225 x 200
‘TOOLFAST’ Precision compound Sine Vice has compound sine angle setting on two sine plates. Both the tiltings are controlled by ne screws.
All Hardened & Tempered to 52 - 56 HRC.All side Parallelism & Squareness within ± 0.005mm.Centre distance of rollers within ± 0.005mm.Inspection certicate is furnished.
Charts for setting both sine angles with the help of gauge blocks is provided.
MODEL JAW DEPTHJAW WIDTH
CSGV-3
MAX. JAW OPENING
OVERALLLENGTH
OVERALLHEIGHT
HOLDING CAPACITY
Ø MAX
3560759095
75 30 76 160 124
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
New
Milling & MC Vices
MANUFACTURED BY ABBOTT TOOLFAST PVT. LTD.
1312
MODEL HEIGHT
qqq
qqqq
OPTIONAL ACCESSORIES
OPTIONAL JAWS FOR MMV-6HXL
SWIVAL BASE:Available separately for all above three sizes of vice.
SERRATED JAW PLATE
Dimensions same as standard plain Jaw but having serrations for extra grip.
MACHINABLE JAW PLATE
• Extra thick (40mm) for carving part shapes into jaw plate.
• Reversible top to bottom and front to back, (counter bore both sides).
• Available in Aluminium and steel both.
V-JAW PLATE
* Required torque can be achieved by tightening handle included with vice. Applying extra torque by using extension pipe or by hammering damages the vice parts and warranty expires.
JAWWIDTH
JAWDEPTH
N.W.WITHOUTSWIVAL
BASE Kgs.
CLAMPING FORCE
Max.
TIGHTENINGTORQUE Nm Max.*
150
580
650
2000 Kgs.
3500 Kgs.
4000 Kgs.
WORLD RENOWNED MODULAR VISES
SOLD & SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.Made in Italy
®
PRECISION MODULAR VISE 'STANDARD SERIES' WITH GUIDED MOVABLE JAW (ART. 1)
q High precision and gang operation
q Pull down easy to change jaws
q Unlimited longevity
q Space saving design
q No "wear" construction
q Unlimited clamping range
q All steel construction hardened and ground HRc60
JAW WIDTH
JAW DEPTH
MAX. JAW OPENING
ART. 11
VISE SIZE
100
30
100
2
125
40
150
3
150
50
4
175
60
5
200
65
6
300
80
200 300 200 300 400 500 200 300 400 500 600 200 300 400 500 600 700 800
A
B
C
D
E
F
G
H
I
J
K
L
M
N
VISE Art. 1
List of Optional Accessories
A Swivel base - ART. 105B Blocking support with hydraulic cylinder - A R T. 271C Hydraulic hand screw blocking device - ART. 257D Intermediate movable jaw with double step - A R T. 212E Floating movable jaw for round parts - ART. 210F Fixed stack type prismatic jaw - ART. 150G Fixed and movable stack-type jaws for round parts - A R T.131H Square stack-type jaws - ART. 138I Movable jaw with 2 oating segment s - ART. 190J Floating movable jaw - hydraulic control - A R T. 188K Step-prismatic guided movable jaw - A R T. 217L Guided movable jaw - straight plate - ART. 146M/N Extension for xed and movable jaw with screws - ART. 132/133
HYDRAULIC CLAMPING OPTION
OptionalAccessories
VISE WITH STANDARD ACCESSORIES
Mention vise size (jaw width) and max. jaw opening for ordering
MODULAR VISES "XL" SERIES
Art. 20Available in different models having jaw width up to 300 mm and jaw opening up to 1100 mm.
Art. 30Available in different models having jaw width up to 300 mm and jaw opening for two work pieces up to 460 mm each.
The hand hydraulic clamping group Art. 257 is an optional manual power multiplier alternative to the mechanical clamping of above vices. This device allows to reach the same clamping power reachable with the mechanical screw through a minimum effort. The hand hydraulic screw of Art. 257 is manually operated by the wrench included. All above Art. 1 vices can be purchased with Art. 257 tted.
Art. 257
1000 Kgf
Available in jaw width 49 mm, 74 mm and 99 mm having jaw opening up to 832 mm for single piece and up to 134 mm each for four work pieces held simultaneously.
1
DMax opening according to pieces to be clamped
300
400
500
600
700
B C E1 2 3 4 5 6 7 8 9
50
50
50
50
50
50
50
50
50
50
32/25
32/25
32/25
32/25
32/25
208
308
408
508
608
75
125
175
225
275
30
64
96
129
161
8
33
58
83
108
\
15
35
55
75
\
3
19
36
52
\
\
8
22
36
\
\
\
12
24
\
\
\
5
16
2
400
500
600
700
800
75
75
75
75
75
75
75
75
75
75
40
40
40
40
40
275
375
475
575
675
100
150
200
250
300
41
75
108
141
175
12
37
62
87
112
\
15
35
55
75
\
\
16
33
50
\
\
3
17
32
\
\
\
6
18
\
\
\
\
8
SIZE
3
700
800
900
1000
100
100
100
100
60
60
60
60
532
632
732
832
217
267
317
367
112
145
178
211
59
84
109
134
28
48
68
88
7
23
39
55
\
6
20
34
\
\
5
18
\
\
\
5
100
100
100
100
Made in Italy
®
HYDROPNEUMATIC POWER UNIT
Gerardi hydropneumatic power unit for hydraulic clamping devices and its bi-products is designed to meet all needs regarding the powering of hydraulic cylinders where low ow rates and high pressures are required. It is driven by air at its inlet to produce hydraulic pressure at its outlet. The special design shape of the power unit is such that a high performance system can be implemented taking up very little space. Thanks to the special design principles, the pump section adopted allows the hydropneumatic power unit to be installed in very hostile environments, such as the work area of machine tools, etc. The unique modular hydraulic ow control system allows controlling up to 6 separate users from just one power unit.
SPECIFICATION
MAX. PERMISSIBLE INLET AIR PRESSURE: 7 bar
RECOMMENDED INLET AIR PRESSURE: 5,5 bar
OIL DELIVERIES: 1.2-1.4-2.2-2.7-4.3 Liters/min
MAX. OIL OUTLET PRESSURE AT 5 BAR AIR INLET PRESSURE: 400 bar
MAX. NO. OF USERS RECOMMENDED: 6
PNEUMO - HYDRAULIC BLOCKING DEVICE
"MULTIFLEX" VICES ART. 600
Art. 393 - Power unit with Manual control, Art. 394 - Power unit with Pneumatic control, Art. 395 - Power unit with Electrical control
A bove power unit can be used to operate Mechanical Modular Vices by Air-Hydraulic power by replacing the mechanical screw by Pneumatic-Hydraulic Blocking device as shown here to convert the mechanical modular vice into quick action air hydraulic vice for production setups. Six vices can be operated simultaneously with one power unit.
The "MULTIFLEX" series vises are a total new concept of modular clamping system able to maximize the machine table capacity and increase its productivity. The comb system even between the xed and movable jaw, increases and improves the clamping capacity. Each vice is supplied with 1 xed jaw and 4 xed-movable jaws, One "T" wrench, 1 pair of positioning key nuts and 4 workstops.
29
0
15
6
130
102M8
AIR INLET 1/4"
250
180
348
USER PORT 1/4"
The pump in its basic version is supplied complete with teon tank, ll plug, silencer, quick acting air connector tting and hydraulic control box.
D
B
E
C
TYPICAL ARRANGEMENTS
Outlet pressure can be regulated and set to desired pressure.
Art. 390 with Manual control valve
Art. 391 with Electrical control valve
Art. 392 with Air control valve CONVERT MECHANICAL VICE INTO
QUICK ACTING AIR HYDRAULIC VICE
STANDARD VICE TOWERS ART. 750 for Horizontal Machining Center
Art. 1 (Vices)
Art. 450 (Center Support)
Art. 828 (Head Plate)
MODULAR ELEMENTS
Art. 102 Movable section
Art. 104 Double xed section
Art. 103Fixed section
Available in different models having jaw width upto 300 mm with unlimited opening. Suitable for large size workpieces (single or double clamping).
WORLD RENOWNED MODULAR VISES
SOLD & SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
Also very suitable for operating swing Clamps (Single acting).
1514
WORLD RENOWNED MODULAR VISES
SOLD & SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.Made in Italy
®
PRECISION MODULAR VISE 'STANDARD SERIES' WITH GUIDED MOVABLE JAW (ART. 1)
q High precision and gang operation
q Pull down easy to change jaws
q Unlimited longevity
q Space saving design
q No "wear" construction
q Unlimited clamping range
q All steel construction hardened and ground HRc60
JAW WIDTH
JAW DEPTH
MAX. JAW OPENING
ART. 11
VISE SIZE
100
30
100
2
125
40
150
3
150
50
4
175
60
5
200
65
6
300
80
200 300 200 300 400 500 200 300 400 500 600 200 300 400 500 600 700 800
A
B
C
D
E
F
G
H
I
J
K
L
M
N
VISE Art. 1
List of Optional Accessories
A Swivel base - ART. 105B Blocking support with hydraulic cylinder - A R T. 271C Hydraulic hand screw blocking device - ART. 257D Intermediate movable jaw with double step - A R T. 212E Floating movable jaw for round parts - ART. 210F Fixed stack type prismatic jaw - ART. 150G Fixed and movable stack-type jaws for round parts - A R T.131H Square stack-type jaws - ART. 138I Movable jaw with 2 oating segment s - ART. 190J Floating movable jaw - hydraulic control - A R T. 188K Step-prismatic guided movable jaw - A R T. 217L Guided movable jaw - straight plate - ART. 146M/N Extension for xed and movable jaw with screws - ART. 132/133
HYDRAULIC CLAMPING OPTION
OptionalAccessories
VISE WITH STANDARD ACCESSORIES
Mention vise size (jaw width) and max. jaw opening for ordering
MODULAR VISES "XL" SERIES
Art. 20Available in different models having jaw width up to 300 mm and jaw opening up to 1100 mm.
Art. 30Available in different models having jaw width up to 300 mm and jaw opening for two work pieces up to 460 mm each.
The hand hydraulic clamping group Art. 257 is an optional manual power multiplier alternative to the mechanical clamping of above vices. This device allows to reach the same clamping power reachable with the mechanical screw through a minimum effort. The hand hydraulic screw of Art. 257 is manually operated by the wrench included. All above Art. 1 vices can be purchased with Art. 257 tted.
Art. 257
1000 Kgf
Available in jaw width 49 mm, 74 mm and 99 mm having jaw opening up to 832 mm for single piece and up to 134 mm each for four work pieces held simultaneously.
1
DMax opening according to pieces to be clamped
300
400
500
600
700
B C E1 2 3 4 5 6 7 8 9
50
50
50
50
50
50
50
50
50
50
32/25
32/25
32/25
32/25
32/25
208
308
408
508
608
75
125
175
225
275
30
64
96
129
161
8
33
58
83
108
\
15
35
55
75
\
3
19
36
52
\
\
8
22
36
\
\
\
12
24
\
\
\
5
16
2
400
500
600
700
800
75
75
75
75
75
75
75
75
75
75
40
40
40
40
40
275
375
475
575
675
100
150
200
250
300
41
75
108
141
175
12
37
62
87
112
\
15
35
55
75
\
\
16
33
50
\
\
3
17
32
\
\
\
6
18
\
\
\
\
8
SIZE
3
700
800
900
1000
100
100
100
100
60
60
60
60
532
632
732
832
217
267
317
367
112
145
178
211
59
84
109
134
28
48
68
88
7
23
39
55
\
6
20
34
\
\
5
18
\
\
\
5
100
100
100
100
Made in Italy
®
HYDROPNEUMATIC POWER UNIT
Gerardi hydropneumatic power unit for hydraulic clamping devices and its bi-products is designed to meet all needs regarding the powering of hydraulic cylinders where low ow rates and high pressures are required. It is driven by air at its inlet to produce hydraulic pressure at its outlet. The special design shape of the power unit is such that a high performance system can be implemented taking up very little space. Thanks to the special design principles, the pump section adopted allows the hydropneumatic power unit to be installed in very hostile environments, such as the work area of machine tools, etc. The unique modular hydraulic ow control system allows controlling up to 6 separate users from just one power unit.
SPECIFICATION
MAX. PERMISSIBLE INLET AIR PRESSURE: 7 bar
RECOMMENDED INLET AIR PRESSURE: 5,5 bar
OIL DELIVERIES: 1.2-1.4-2.2-2.7-4.3 Liters/min
MAX. OIL OUTLET PRESSURE AT 5 BAR AIR INLET PRESSURE: 400 bar
MAX. NO. OF USERS RECOMMENDED: 6
PNEUMO - HYDRAULIC BLOCKING DEVICE
"MULTIFLEX" VICES ART. 600
Art. 393 - Power unit with Manual control, Art. 394 - Power unit with Pneumatic control, Art. 395 - Power unit with Electrical control
A bove power unit can be used to operate Mechanical Modular Vices by Air-Hydraulic power by replacing the mechanical screw by Pneumatic-Hydraulic Blocking device as shown here to convert the mechanical modular vice into quick action air hydraulic vice for production setups. Six vices can be operated simultaneously with one power unit.
The "MULTIFLEX" series vises are a total new concept of modular clamping system able to maximize the machine table capacity and increase its productivity. The comb system even between the xed and movable jaw, increases and improves the clamping capacity. Each vice is supplied with 1 xed jaw and 4 xed-movable jaws, One "T" wrench, 1 pair of positioning key nuts and 4 workstops.
29
0
15
6
130
102M8
AIR INLET 1/4"
250
180
348
USER PORT 1/4"
The pump in its basic version is supplied complete with teon tank, ll plug, silencer, quick acting air connector tting and hydraulic control box.
D
B
E
C
TYPICAL ARRANGEMENTS
Outlet pressure can be regulated and set to desired pressure.
Art. 390 with Manual control valve
Art. 391 with Electrical control valve
Art. 392 with Air control valve CONVERT MECHANICAL VICE INTO
QUICK ACTING AIR HYDRAULIC VICE
STANDARD VICE TOWERS ART. 750 for Horizontal Machining Center
Art. 1 (Vices)
Art. 450 (Center Support)
Art. 828 (Head Plate)
MODULAR ELEMENTS
Art. 102 Movable section
Art. 104 Double xed section
Art. 103Fixed section
Available in different models having jaw width upto 300 mm with unlimited opening. Suitable for large size workpieces (single or double clamping).
WORLD RENOWNED MODULAR VISES
SOLD & SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
Also very suitable for operating swing Clamps (Single acting).
1514
ANGLE HEADS
ATC models for Automatic Tool Change and MTC models for Manual Tool Change machines
Case hardened and ground Shank and Shaft
Modular antirotation group
Graduated Ring
Output:- ER Collet (Standard)- Weldon- Shell Mill Holder- Special
Positioning Pin with Automatic Release
Standard 10BAR Coolant Through the Pin
Treated Steel Head Body º with 360 Position
Stop BlockWith case hardened bushing and gasket
BearingsAngular contact
preloaded ball bearings of precision class
ABEC7/9
GearsGleason ground spiral bevel gears maximum
performances and minimum vibration
SPINDLE SPEEDERS
Speed increase up to 1÷8 through two planetary
gears
Case hardened and ground shank and shaft
Standard 10Bar coolant through the pin
Output:- ER Collet (Standard)
- Weldon- Shell Mill Holder
- Special
OTHER PRODUCTS FROM GERARDI
MULTITASKING vises for 5 axis machining centers
Self-centering or eccentric
(Hydraulic or Pneumatic)
Immediate positioning & clamping of pallet, xture, vise or workpiece.
Zero Point
- Mazak - HAAS
- Biglia - Okuma
- Daewoo - Takisawa
- Mori seiki - VDI
- Nakamura
Gerardi Driven tools
Grid magnetic plates for milling
PlatformManual self-centeringscroll chucks
MULTIFLEX Vises and Vise Towers for multi-clamping
The most versatile
Tombstone for HorizontalMachining Center with Zero point or Grid type
WORLD RENOWNED ANGLE HEADS AND OTHER PRODUCTS
Made in Italy
®
Write to us for more details on products or visit www.gerardi.it®
SOLD & SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
LOCK DOWN JAW HYDRAULIC MACHINE VICE
‘SAFEWAY’ Lock Down Jaw Hydraulic Machine Vice has 'Down thrust semi-sphere segment' mechanism which eliminates jaw lift and work piece tilt. These vices have in-built hydraulic system hence do not require any external hydraulic line. Vice is operated by handle movement as in mechanical vices. Most suitable for Milling machine or Machining centre.
q High clamping force in forward as well as downward direction is achieved by effortless handle movement.q Extra large jaw opening.q Rigid Material-vice body made of ductile iron having 80,000 psi tensile strength.q Vice bed is ame hardened to HRC 45 which does not wear and maintains accuracy for long.
2 KGS of power in this directionProduce 1 KG of downward.Down thrust "semi-sphere segment"Mechanism-eliminates jaw lift and work-piece tilt.
MAX. OPENING CAPACITY
PHV-130
PHV-160
PHV-200
PHV-250
MODEL
130
160
200
250
JAW WIDTH
55
58
63
80
JAW DEPTH
MAX. JAWOPENING
OVERALLLENGTH
220
300
300
340
505
625
700
810
MC COMPACT HYDRAULIC VICE
This vise has all features of above PHV model including Lock down jaw mechanism. These vices have in-built hydraulic system hence do not require any external hydraulic line. Vice is operated by handle movement as in mechanical vices. Due to its compact design and accuracy, it is more suitable for machining centre for multiple vice setups.
CHV-100 V
CHV-130 V
CHV-160 V
CHV-200 V
MODEL
101
131
161
201
JAW WIDTH
48
55
58
63
JAW DEPTH
MAX. JAWOPENING
125
180
240
280
MAX. JAW OPENING WITH OPTIONAL JAW PLATES
320
380
470
540
Above vise is also available in one more model with 90° handle driving mechanism as shown below.
CHV-VD Modelwith 90° handle driving mechanism
Examples of Clamping
‘SAFEWAY’ Drill Grinding Machine is a portable machine used for Quick & Accurate grinding of Drill point.
q Easy operation, precision grinding by unskilled operator.q Diamond Wheel for long lasting service life and precise grinding angle.q Built-in collet bracket for easy management of collets (All sizes collets supplied with the machine).q Grinds point angle as well as chisel edge angle of a drill.q Can also grind solid carbide drills with optional Grinding Wheel.
Point angle
Chisel edge angle
Point Angle grinding & chisel edge angle grinding in two operations Rear View
Front View
DRILL GRINDING MACHINE
Optional Jaw Plates
MACHINING CENTRE VICES AND DRILL GRINDING MACHINE
OVERALLLENGTH
475
540
630
705
MODELDIA.
CAPACITYANGLE
CAPACITYPOWER
SA-1300
SA-2000
SA-2500
3Ø - 13Ø
3Ø - 20Ø
13Ø - 26Ø
90° - 144°
90° - 144°
90° - 144°
Single Phase AC -220 V
Single Phase AC -220 V
Single Phase AC -220 V
Ask us for detail catalogue of products
Taiwan
16 17
ANGLE HEADS
ATC models for Automatic Tool Change and MTC models for Manual Tool Change machines
Case hardened and ground Shank and Shaft
Modular antirotation group
Graduated Ring
Output:- ER Collet (Standard)- Weldon- Shell Mill Holder- Special
Positioning Pin with Automatic Release
Standard 10BAR Coolant Through the Pin
Treated Steel Head Body º with 360 Position
Stop BlockWith case hardened bushing and gasket
BearingsAngular contact
preloaded ball bearings of precision class
ABEC7/9
GearsGleason ground spiral bevel gears maximum
performances and minimum vibration
SPINDLE SPEEDERS
Speed increase up to 1÷8 through two planetary
gears
Case hardened and ground shank and shaft
Standard 10Bar coolant through the pin
Output:- ER Collet (Standard)
- Weldon- Shell Mill Holder
- Special
OTHER PRODUCTS FROM GERARDI
MULTITASKING vises for 5 axis machining centers
Self-centering or eccentric
(Hydraulic or Pneumatic)
Immediate positioning & clamping of pallet, xture, vise or workpiece.
Zero Point
- Mazak - HAAS
- Biglia - Okuma
- Daewoo - Takisawa
- Mori seiki - VDI
- Nakamura
Gerardi Driven tools
Grid magnetic plates for milling
PlatformManual self-centeringscroll chucks
MULTIFLEX Vises and Vise Towers for multi-clamping
The most versatile
Tombstone for HorizontalMachining Center with Zero point or Grid type
WORLD RENOWNED ANGLE HEADS AND OTHER PRODUCTS
Made in Italy
®
Write to us for more details on products or visit www.gerardi.it®
SOLD & SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
LOCK DOWN JAW HYDRAULIC MACHINE VICE
‘SAFEWAY’ Lock Down Jaw Hydraulic Machine Vice has 'Down thrust semi-sphere segment' mechanism which eliminates jaw lift and work piece tilt. These vices have in-built hydraulic system hence do not require any external hydraulic line. Vice is operated by handle movement as in mechanical vices. Most suitable for Milling machine or Machining centre.
q High clamping force in forward as well as downward direction is achieved by effortless handle movement.q Extra large jaw opening.q Rigid Material-vice body made of ductile iron having 80,000 psi tensile strength.q Vice bed is ame hardened to HRC 45 which does not wear and maintains accuracy for long.
2 KGS of power in this directionProduce 1 KG of downward.Down thrust "semi-sphere segment"Mechanism-eliminates jaw lift and work-piece tilt.
MAX. OPENING CAPACITY
PHV-130
PHV-160
PHV-200
PHV-250
MODEL
130
160
200
250
JAW WIDTH
55
58
63
80
JAW DEPTH
MAX. JAWOPENING
OVERALLLENGTH
220
300
300
340
505
625
700
810
MC COMPACT HYDRAULIC VICE
This vise has all features of above PHV model including Lock down jaw mechanism. These vices have in-built hydraulic system hence do not require any external hydraulic line. Vice is operated by handle movement as in mechanical vices. Due to its compact design and accuracy, it is more suitable for machining centre for multiple vice setups.
CHV-100 V
CHV-130 V
CHV-160 V
CHV-200 V
MODEL
101
131
161
201
JAW WIDTH
48
55
58
63
JAW DEPTH
MAX. JAWOPENING
125
180
240
280
MAX. JAW OPENING WITH OPTIONAL JAW PLATES
320
380
470
540
Above vise is also available in one more model with 90° handle driving mechanism as shown below.
CHV-VD Modelwith 90° handle driving mechanism
Examples of Clamping
‘SAFEWAY’ Drill Grinding Machine is a portable machine used for Quick & Accurate grinding of Drill point.
q Easy operation, precision grinding by unskilled operator.q Diamond Wheel for long lasting service life and precise grinding angle.q Built-in collet bracket for easy management of collets (All sizes collets supplied with the machine).q Grinds point angle as well as chisel edge angle of a drill.q Can also grind solid carbide drills with optional Grinding Wheel.
Point angle
Chisel edge angle
Point Angle grinding & chisel edge angle grinding in two operations Rear View
Front View
DRILL GRINDING MACHINE
Optional Jaw Plates
MACHINING CENTRE VICES AND DRILL GRINDING MACHINE
OVERALLLENGTH
475
540
630
705
MODELDIA.
CAPACITYANGLE
CAPACITYPOWER
SA-1300
SA-2000
SA-2500
3Ø - 13Ø
3Ø - 20Ø
13Ø - 26Ø
90° - 144°
90° - 144°
90° - 144°
Single Phase AC -220 V
Single Phase AC -220 V
Single Phase AC -220 V
Ask us for detail catalogue of products
Taiwan
16 17
‘GIN’ Hydraulic Machine Vice is a suitable hydraulic vice for Milling machine. Can also be used on a machining centre.
q Operates on handle movement as in mechanical vices.q High clamping force can be achieved by effortless handle movement
which e liminates h ammering on handle.
MILLING AND CNC ACCESSORIES
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. Taiwan
HYDRAULIC MACHINE VICE
MODEL
GIN-HVA-100-01GIN-HVA-125-01GIN-HVA-150-01GIN-HVA-200-01
JAW WIDTH
100125150200
JAW DEPTH
36465162
MAX. JAW OPENING
170220300300
UNIVERSAL 3-WAY ANGLE VICE
MODELJAW
WIDTH
GIN-VW3GIN-VW4GIN-VW5
80106132
303840
90105140
JAWDEPTH
MAX. JAWOPENING
HORIZONTAL AND VERTICAL ROTARY TABLE
Available in different sizes from 150 Ø to 400 Ø. Can be mounted horizontally as
well as vertically.
MODEL
GIN-HV150GIN-HV200GIN-HV250GIN-HV300GIN-HV350GIN-HV400
TABLEDIAMETER
150200250300350400
ELECTRONIC (OPTICAL) EDGE FINDER
GIN TSOE 20S
GIN TSOE 20L
GIN TSOE 20LB
MODEL
20
20
20
BALL DIA
‘GIN’ Electron icedge nder with LED is most convenient to use as the tip of the Touch Probe is brought near the edge of the job, red light powered by enclosed battery glows as the ball probe comes in contact with the edge.
q C oncentricity of ball-probe and shank within 0.005 mm.
q Repeatability of work location within 0.01mm.
q Spring loaded Ball-probe to prevent damage of probe.
TOTAL LENGTH
120
158
158
10
10
10
SHANKDIA
TYPE
WITH LED ONLY
WITH LED ONLY
WITH LED AND BEEPER
Z-AXIS ZERO SETTER - Model Z-50
Z-Axis Zero Setter is used for zero setting of tool height from the machine table on machining centres. Setting height : 50.00±0.01mm
Features:
q Large measuring surface to assure high measuring accuracy.
q Low Spring force to avoid breakage of small end mill and drill.
q Easy to calibrate by a ground parallel or gauge block.
48
3
50+0.005
68Ø
0
Different types of shanks are also available separately.
PRECISION KEYLESS DRILL CHUCK
APU08-J 1APU10-J 2APU13-J 6APU16-J 6
MODEL
0-80-101-133-16
CAPACITY
J 1J 2SJ 6J 6
TAPER
High quality Keyless Drill Chuck is most suitable for CNC and Milling machines.
The compact designed drill chuck provides higher accuracy, improved rigidity, and shorter overhang for holding drills.
Preventing from slip-out during machining, absolutely eliminating the disadvantage of connecting by taper. A dedicated Spanner is provided for powerful clamping.
Available in BT 30/40/50 and HSK shank having holding capacities 0-8 mm, 1-13 mm and 3-16 mm.
NC DRILL CHUCK - INTEGRATED TYPE
Z-AXIS PRESET GAUGE - OPTICAL TYPE Model GIN-ZOP-50
Used for setting tool height 50mm. Its base has a built-in magnet hence can be used vertically as well as horizontally. The red lamp lights up when touched. Height can be micro adjusted by gauge block.
BT TYPE TAPER WIPER
MODEL FOR SPINDLE TAPER
GIN-W30GIN-W40GIN-W50
BT-30BT-40BT-50
Z-AXIS ZERO SETTER - ZPM Series - Ceramic
q L east measuring diameter of cutting tool : 0.1mmq S cratch proof ceramic measuring face
Model GIN-BS-2 dividing head comes with complete set of gears and dividing plates. Centre height is 132mm and ratio of worm to gear is 1:40.
UNIVERSAL DIVIDING HEAD-Model GIN-BS-2
ZPM-50/50P ZPM-100P
CERAMIC EDGE FINDER
Tips are made of Ceramic having 10 dia.
TSEP 1020BTSEP 1020TSEP10
MODEL BASE TYPE
ZPM-50
ZPM-50 P
ZPM-100 P
Plain
Magnetic
Magnetic ON/OFF
'GIN' BHC Series Boring Heads have wide base bearing surface that assures maximum rigidity even when the bar holder is in an offset position. The adjustment screw is ground after hardening. Shanks of different types and boring tools available seperately.
Different types of shanks are also available separately.
MODELOUTER
DIABORING BAR
HOLE SIZEOFFSET
CROSSHOLE DIA
GIN-BHC2GIN-BHC3GIN-BHC4
5075
100
121825
121825
152525
0.010.010.01
PRECISION MICRO BORING HEADS AND SETS
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. Taiwan
UNIVERSAL BORING AND FACING MASTER HEAD
Universal Boring and Facing Head model GIN-BHAM has very precise construction with auto feed and stop. Working range is 5 mm to 250 mm.
Available complete with boring bars, boring tools etc. with different shanks such as BT40, BT50, R8, NT30, NT40, NT50, MT3, MT4,MT5.
18
CROSS HOLEDIAMETER
18
BORING BARHOLE SIZE
15
OFFSET
Model GIN-BHAM (SET)
BORING HEAD SETS AND BORING TOOLS
Sets available with different interchangeable shanks such as R8, NT30, NT40, NT50, MT2, MT3, MT4, MT5, BT40 & BT50.
MODEL GIN-BHC2 (SET) WITH THREE NOS. INDEXABLE INSERTS TYPE BORING BARS.
0.01 mm
BORING HEAD OUTER DIA
MIN. BORING DIA
MAX.BORING DIA
MAX. BORINGDEPTH
BORING BARHOLE SIZE
8 mm 90 mm* 45 mm 12 mm
LEAST COUNT
50
Sets available with different interchangeable shanks such as R8, NT30, NT40, NT50, MT2, MT3, MT4, MT5, BT40 & BT50.
MODEL GIN-BHC3 (SET) WITH THREE NOS. INDEXABLE INSERTS TYPE BORING BARS.
75
BORING HEAD OUTER DIA
MIN. BORING DIA
MAX.BORING DIA
MAX. BORINGDEPTH
BORING BARHOLE SIZE
12 mm 140 mm* 90 mm 18 mm 0.01 mm
LEAST COUNT
Boring tools available in shank dia 12mm and shank dia 18mm for BHC2 and BHC3 boring heads respectively. These boring tools are available in different sizes and lengths to achieve different sizes of bores.Side type boring tools to be used in cross hole of boring head for large diameter boring are also available.
PRECISION BORING TOOLS - WITH INDEXABLE CARBIDE INSERTS
Complete with boring tools available with different interchangeable shanks such as R8, NT30, NT40, NT50, MT3, MT4, MT5, BT40 & BT50.
MODEL GIN-BH2084 (SET) WITH EIGHT NOS. INDEXABLE INSERTS TYPE BORING BARS.
0.005 mm
BORING HEAD OUTER DIA
MIN. BORING DIA
MAX.BORING DIA
BORING BARHOLE SIZE
8 mm 280 mm 20 mm 84 mm
LEAST COUNT
Standard sets are with indexable inserts type carbide boring tools.
*Larger boring dia upto 200mm can be achieved by optional cross hole boring tool with HSS Boring bit (GIN Model 5958-902063) available separately.
* Larger boring dia upto 250mm can be achieved by optional cross hole boring tool with indexable insert (GIN Model 5952-BH18-36) available separately.
BORING HEAD - BHC Series
BORING HEAD - HIGH PRECISION FOR SMALL DIAMETER
GIN-BHW02 Series Boring head is high precision boring head most suitable for small diameters ranging from 3Ø to 50Ø. Different boring tools for different sizes of bores are available seperately. All types of shanks are also available separately.
63.5
OUTERDIA.
GIN-BHW02-50CK6
MODEL
16
BORING BARHOLE SIZE
OFFSETLEASTCOUNT
4.5 0.001
LEASTCOUNT
MAX.BORING DEPTH
110 mm
1918
‘GIN’ Hydraulic Machine Vice is a suitable hydraulic vice for Milling machine. Can also be used on a machining centre.
q Operates on handle movement as in mechanical vices.q High clamping force can be achieved by effortless handle movement
which e liminates h ammering on handle.
MILLING AND CNC ACCESSORIES
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. Taiwan
HYDRAULIC MACHINE VICE
MODEL
GIN-HVA-100-01GIN-HVA-125-01GIN-HVA-150-01GIN-HVA-200-01
JAW WIDTH
100125150200
JAW DEPTH
36465162
MAX. JAW OPENING
170220300300
UNIVERSAL 3-WAY ANGLE VICE
MODELJAW
WIDTH
GIN-VW3GIN-VW4GIN-VW5
80106132
303840
90105140
JAWDEPTH
MAX. JAWOPENING
HORIZONTAL AND VERTICAL ROTARY TABLE
Available in different sizes from 150 Ø to 400 Ø. Can be mounted horizontally as
well as vertically.
MODEL
GIN-HV150GIN-HV200GIN-HV250GIN-HV300GIN-HV350GIN-HV400
TABLEDIAMETER
150200250300350400
ELECTRONIC (OPTICAL) EDGE FINDER
GIN TSOE 20S
GIN TSOE 20L
GIN TSOE 20LB
MODEL
20
20
20
BALL DIA
‘GIN’ Electron icedge nder with LED is most convenient to use as the tip of the Touch Probe is brought near the edge of the job, red light powered by enclosed battery glows as the ball probe comes in contact with the edge.
q C oncentricity of ball-probe and shank within 0.005 mm.
q Repeatability of work location within 0.01mm.
q Spring loaded Ball-probe to prevent damage of probe.
TOTAL LENGTH
120
158
158
10
10
10
SHANKDIA
TYPE
WITH LED ONLY
WITH LED ONLY
WITH LED AND BEEPER
Z-AXIS ZERO SETTER - Model Z-50
Z-Axis Zero Setter is used for zero setting of tool height from the machine table on machining centres. Setting height : 50.00±0.01mm
Features:
q Large measuring surface to assure high measuring accuracy.
q Low Spring force to avoid breakage of small end mill and drill.
q Easy to calibrate by a ground parallel or gauge block.
48
3
50+0.005
68Ø
0
Different types of shanks are also available separately.
PRECISION KEYLESS DRILL CHUCK
APU08-J 1APU10-J 2APU13-J 6APU16-J 6
MODEL
0-80-101-133-16
CAPACITY
J 1J 2SJ 6J 6
TAPER
High quality Keyless Drill Chuck is most suitable for CNC and Milling machines.
The compact designed drill chuck provides higher accuracy, improved rigidity, and shorter overhang for holding drills.
Preventing from slip-out during machining, absolutely eliminating the disadvantage of connecting by taper. A dedicated Spanner is provided for powerful clamping.
Available in BT 30/40/50 and HSK shank having holding capacities 0-8 mm, 1-13 mm and 3-16 mm.
NC DRILL CHUCK - INTEGRATED TYPE
Z-AXIS PRESET GAUGE - OPTICAL TYPE Model GIN-ZOP-50
Used for setting tool height 50mm. Its base has a built-in magnet hence can be used vertically as well as horizontally. The red lamp lights up when touched. Height can be micro adjusted by gauge block.
BT TYPE TAPER WIPER
MODEL FOR SPINDLE TAPER
GIN-W30GIN-W40GIN-W50
BT-30BT-40BT-50
Z-AXIS ZERO SETTER - ZPM Series - Ceramic
q L east measuring diameter of cutting tool : 0.1mmq S cratch proof ceramic measuring face
Model GIN-BS-2 dividing head comes with complete set of gears and dividing plates. Centre height is 132mm and ratio of worm to gear is 1:40.
UNIVERSAL DIVIDING HEAD-Model GIN-BS-2
ZPM-50/50P ZPM-100P
CERAMIC EDGE FINDER
Tips are made of Ceramic having 10 dia.
TSEP 1020BTSEP 1020TSEP10
MODEL BASE TYPE
ZPM-50
ZPM-50 P
ZPM-100 P
Plain
Magnetic
Magnetic ON/OFF
'GIN' BHC Series Boring Heads have wide base bearing surface that assures maximum rigidity even when the bar holder is in an offset position. The adjustment screw is ground after hardening. Shanks of different types and boring tools available seperately.
Different types of shanks are also available separately.
MODELOUTER
DIABORING BAR
HOLE SIZEOFFSET
CROSSHOLE DIA
GIN-BHC2GIN-BHC3GIN-BHC4
5075
100
121825
121825
152525
0.010.010.01
PRECISION MICRO BORING HEADS AND SETS
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD. Taiwan
UNIVERSAL BORING AND FACING MASTER HEAD
Universal Boring and Facing Head model GIN-BHAM has very precise construction with auto feed and stop. Working range is 5 mm to 250 mm.
Available complete with boring bars, boring tools etc. with different shanks such as BT40, BT50, R8, NT30, NT40, NT50, MT3, MT4,MT5.
18
CROSS HOLEDIAMETER
18
BORING BARHOLE SIZE
15
OFFSET
Model GIN-BHAM (SET)
BORING HEAD SETS AND BORING TOOLS
Sets available with different interchangeable shanks such as R8, NT30, NT40, NT50, MT2, MT3, MT4, MT5, BT40 & BT50.
MODEL GIN-BHC2 (SET) WITH THREE NOS. INDEXABLE INSERTS TYPE BORING BARS.
0.01 mm
BORING HEAD OUTER DIA
MIN. BORING DIA
MAX.BORING DIA
MAX. BORINGDEPTH
BORING BARHOLE SIZE
8 mm 90 mm* 45 mm 12 mm
LEAST COUNT
50
Sets available with different interchangeable shanks such as R8, NT30, NT40, NT50, MT2, MT3, MT4, MT5, BT40 & BT50.
MODEL GIN-BHC3 (SET) WITH THREE NOS. INDEXABLE INSERTS TYPE BORING BARS.
75
BORING HEAD OUTER DIA
MIN. BORING DIA
MAX.BORING DIA
MAX. BORINGDEPTH
BORING BARHOLE SIZE
12 mm 140 mm* 90 mm 18 mm 0.01 mm
LEAST COUNT
Boring tools available in shank dia 12mm and shank dia 18mm for BHC2 and BHC3 boring heads respectively. These boring tools are available in different sizes and lengths to achieve different sizes of bores.Side type boring tools to be used in cross hole of boring head for large diameter boring are also available.
PRECISION BORING TOOLS - WITH INDEXABLE CARBIDE INSERTS
Complete with boring tools available with different interchangeable shanks such as R8, NT30, NT40, NT50, MT3, MT4, MT5, BT40 & BT50.
MODEL GIN-BH2084 (SET) WITH EIGHT NOS. INDEXABLE INSERTS TYPE BORING BARS.
0.005 mm
BORING HEAD OUTER DIA
MIN. BORING DIA
MAX.BORING DIA
BORING BARHOLE SIZE
8 mm 280 mm 20 mm 84 mm
LEAST COUNT
Standard sets are with indexable inserts type carbide boring tools.
*Larger boring dia upto 200mm can be achieved by optional cross hole boring tool with HSS Boring bit (GIN Model 5958-902063) available separately.
* Larger boring dia upto 250mm can be achieved by optional cross hole boring tool with indexable insert (GIN Model 5952-BH18-36) available separately.
BORING HEAD - BHC Series
BORING HEAD - HIGH PRECISION FOR SMALL DIAMETER
GIN-BHW02 Series Boring head is high precision boring head most suitable for small diameters ranging from 3Ø to 50Ø. Different boring tools for different sizes of bores are available seperately. All types of shanks are also available separately.
63.5
OUTERDIA.
GIN-BHW02-50CK6
MODEL
16
BORING BARHOLE SIZE
OFFSETLEASTCOUNT
4.5 0.001
LEASTCOUNT
MAX.BORING DEPTH
110 mm
1918
20 21
20 21
OTHER GIN PRODUCTS
Taiwan
PUNCH FORMER (BIG) 3 JAWS PUNCH FORMER MOTOR PUNCH FORMERER COLLET PUNCH FORMER
WHEEL BALANCING STANDUNIVERSAL WHEEL DRESSER FLANGES FOR GRINDING MACHINESDIAMOND CBN FLAT WHEEL TRUER
UNIVERSAL TILTING ROTARY TABLESUPER INDEX SPACER CHAMFERING MACHINES UNIVERSAL CUTTER GRINDER
PERMANENT MAGNETIC CHUCK ROTARY PERMANENT MAGNETIC CHUCK
PERMANENT MAGNETIC CHUCK (VERTICAL TYPE)
ELECTRICALLY CONTROLLEDPERMANENT MAGNETIC
CHUCK
PIN GAUGE SETGAUGE BLOCKS DEMAGNETIZER - HANDY TYPE & STANDARD TYPE
SUPER THIN CHUCKS FOR MILLING
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
NEW GIN PRODUCTS
Taiwan
Ask us for detail catalogue of products or visit www.ginchan.com.tw
WIRE EDM CLAMP CLAMP KIT FOR WIREEDM S.S. PRECISION VISE FOR WIREEDM
ADJUSTABLE FIXTURES AND VISES FOR WIREEDM
FIXTURES AND ELEMENTS FOR CMMCENTER PUNCH FORMER PRECISION UNIVERSAL THIN CHUCK PAEDESTAL
THREAD GRINDING SLIDER
BALL ENDMILL GRINDERCUTTING-OFF MACHINE SCREW TAP GRINDER AIR TAPPING MACHINE
3D TASTER CONCENTRICITY MEASURING INSTRUMENTCENTERING INDICATOR TOOL PRE-SETTER
LARGE DIA BORING HEADSMALL DIA FINE BORING HEAD QUICK CHANGE TAPPING CHUCKS
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
MICRO BORING HEAD
2322
OTHER GIN PRODUCTS
Taiwan
PUNCH FORMER (BIG) 3 JAWS PUNCH FORMER MOTOR PUNCH FORMERER COLLET PUNCH FORMER
WHEEL BALANCING STANDUNIVERSAL WHEEL DRESSER FLANGES FOR GRINDING MACHINESDIAMOND CBN FLAT WHEEL TRUER
UNIVERSAL TILTING ROTARY TABLESUPER INDEX SPACER CHAMFERING MACHINES UNIVERSAL CUTTER GRINDER
PERMANENT MAGNETIC CHUCK ROTARY PERMANENT MAGNETIC CHUCK
PERMANENT MAGNETIC CHUCK (VERTICAL TYPE)
ELECTRICALLY CONTROLLEDPERMANENT MAGNETIC
CHUCK
PIN GAUGE SETGAUGE BLOCKS DEMAGNETIZER - HANDY TYPE & STANDARD TYPE
SUPER THIN CHUCKS FOR MILLING
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
NEW GIN PRODUCTS
Taiwan
Ask us for detail catalogue of products or visit www.ginchan.com.tw
WIRE EDM CLAMP CLAMP KIT FOR WIREEDM S.S. PRECISION VISE FOR WIREEDM
ADJUSTABLE FIXTURES AND VISES FOR WIREEDM
FIXTURES AND ELEMENTS FOR CMMCENTER PUNCH FORMER PRECISION UNIVERSAL THIN CHUCK PAEDESTAL
THREAD GRINDING SLIDER
BALL ENDMILL GRINDERCUTTING-OFF MACHINE SCREW TAP GRINDER AIR TAPPING MACHINE
3D TASTER CONCENTRICITY MEASURING INSTRUMENTCENTERING INDICATOR TOOL PRE-SETTER
LARGE DIA BORING HEADSMALL DIA FINE BORING HEAD QUICK CHANGE TAPPING CHUCKS
SOLD AND SERVICED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
MICRO BORING HEAD
2322
MILLING AND CNC ACCESSORIES
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
ER COLLETS AND COLLET CHUCK SETS
Following sizes of ER Collet & Collet Chuck sets with spanner in an attractive plastic carry box are available.
ER 32 - BT - 30
15 Pieces Collet Sizes Included In Set
Collet Chuck SetWith Spanner
3-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 12-11, 14-13, 15-14, 16-15, 17-16,
18-17, 20-19
ER 40 - BT - 503-2, 4-3, 5-4, 6-5, 8-7, 10-9, 12-11, 14-13, 15-14, 16-15, 18-17, 20-19,
22-21, 24-23, 26-25
3-2, 4-3, 5-4, 6-5, 8-7, 10-9, 12-11, 14-13, 15-14, 16-15, 18-17, 20-19,
22-21, 24-23, 26-25ER 40 - BT - 40
ER 32 - BT - 403-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 12-11, 14-13, 15-14, 16-15, 17-16,
18-17, 20-19
All below given sizes of ER Collets are available in single piece packing.
ER SPRING COLLETS as per DIN 6499
Collet Type Size - Diameter Range (mm)
ER16 1-0.5, 1.5-1, 2-1.5, 3 -2, 4-3, 5-4, 6-5, 7-6, 8-7,
9-8, 10-9
ER 20 1-0.5, 1.5-1, 2-1.5, 3 -2, 4-3, 5-4, 6-5, 7-6, 8-7,
9-8, 10-9, 11-10, 12-11, 13-12
ER 25 1-0.5, 1.5-1, 2-1.5, 3 -2, 4-3, 5-4, 6-5, 7-6, 8-7,
9-8, 10-9, 11-10, 12-11, 13-12, 14-13, 15-14,
16-15
ER 32 1-0.5, 1.5-1, 2-1.5, 3-2, 3.5-2.5, 4-3, 5-4, 6-5,
7-6, 8-7, 9-8, 10-9, 11-10, 12-11, 13-12, 14-
13, 15-14, 16-15, 17-16, 18-17, 19-18, 20-19
ER 40 3-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 11-10,
12-11, 13-12, 14-13, 15-14, 16-15, 17-16,
18-17, 19-18, 20-19, 21-20, 22-21, 23-22,
24-23, 25-24, 26-25, 27-26, 28-27, 29-28,
30-29
3-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 12-11, 14-13, 15-14, 16-15, 17-16,
18-17, 20-19 ER 32 - BT - 50
DRILLING AND MILLING ACCESSORIES
Following sizes of Pull Studs are available:
PULL STUDS - MAS 403
Sizes
PS - BT30 - 30°
PS - BT30 - 45°
PS - BT40 - 30°
Sizes
PS - BT40 - 45°
PS - BT50 - 30°
PS - BT50 - 45°
Used for tightening the tool in the tool holder outside the machine.
HORIZONTAL / VERTICAL CNC TOOL TIGHTENING FIXTURE
TTF-BT-50
TTF-BT-40
TTF-BT-30 BT-30
BT-40
BT-50
Model Taper
Following spanners are available for tightening and loosening collet chucks of respective sizes.
ER SPANNER
Sizes
ER16 - Open Ended Spanner Type
ER20 - Open Ended Spanner Type
Sizes
ER25 - Star Type
ER32 - Star Type
ER40 - Star Type
Open Ended Type
Star Type
Hardened high grade steel, precision ground.
ER COLLECT CHUCKS
Sizes Sizes
BT30 - ER16 x 70
BT30 - ER20 x 70
BT30 - ER25 x 70
BT30 - ER32 x 70
BT30 - ER40 x 80
BT40 - ER16 x 70
BT40 - ER20 x 70
BT40 - ER25 x 70
BT40 - ER32 x 70
BT40 - ER32 x 100
BT40 - ER40 x 80
BT50 - ER16 x 70
BT50 - ER20 x 70
BT50 - ER25 x 70
BT50 - ER32 x 80
BT50 - ER40 x 80
Hardened high grade steel, precision ground.
SIDE LOCK ADAPTOR (End Mill Holder)
Sizes
BT40 - SLA 8 dia x 50
BT40 - SLA 10 dia x 63
BT40 - SLA 12 dia x 63
BT40 - SLA 16 dia x 63
BT40 - SLA 20 dia x 70
BT40 - SLA 25 dia x 90
Sizes
BT40 - SLA 32 dia x 100
BT40 - SLA 40 dia x 120
BT50 - SLA 20 dia x 80
BT50 - SLA 25 dia x 100
BT50 - SLA 32 dia x 100
BT50 - SLA 40 dia x 120
Hardened high grade steel, precision ground.
SHELL MILL ARBOR
Sizes
BT40 - 22 dia x 60
BT40 - 22 dia x 100
BT40 - 27 dia x 60
BT40 - 27 dia x 105
Sizes
BT40 - 32 dia x 60
BT50 - 27 dia x 105
BT50 - 32 dia x 60
UNIVERSAL ARM MAGNETIC STAND : Model MS-80
q Rigid locking of the stand by one central knob.
q Magnetic Base with ON / OFF Switch size : H55 x W50 x L63.
q Magnetic Pull : 80 Kgs.
q Dial Holder hole ID = 8mm with micro adjustment.
q Main stem height = 290 mm.
SOGGOMARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
2928
TWO-WAY ANGLE MILLING VICE
Model
STW-4
STW-5
STW-6
100
125
160
41
45
50
Max. Jaw Opening
80
95
125
Jaw DepthJaw Width
q Made of high grade cast iron.
q The vice can be adjusted and locked at any angle from the horizontal position to the vertical position and also has swivelling base with rotation of 360°.
q Parallelism and square within 0.025mm/100mm.
q Special segment mechanism minimizes jaw lift and Workpiece tilt.
q Ductile iron construction for high durability.
ANGLOCK MILLING VICE
Model
SLV-4
SLV-6
SLV-6L
SLV-8
100
160
160
200
32
45
45
50
Max. Jaw Opening
100
150
190
190
Jaw DepthJaw Width
All above models available with or without swivel base.
OverallLength
310
412
425
500
UNIVERSAL INDEX CENTER (DIVIDING HEAD)
Standard accessories include dividing plate A, B, C, tail stock and complete set of gears.
SEMI - UNIVERSAL INDEX CENTER (DIVIDING HEAD)
‘SOGGO’ Universal Index Centre has been designed to carry out all types of gear cutting. The center face can be tilted from a horizontal position of 90° down to -10° from vertical, and inclinations can be read off a scale graduated in degrees. The center is built to highest engineering standards and is factory inspected and tested to assure complete satisfaction. The ratio of worm to gear is 1:40.
Standard accessories include dividing plate A, B, C and tail stock.
Chuck not included.
Chuck not included.
Model
SBS - 2
Centre Height
133
Centre Taper
MT4
Model
SBS - 0
Centre Height
100
Centre Taper
MT2
SBS - 1 128 MT3
SOGGO
2524
Most suitable for production setups on Drilling or Light milling operations. Rapid Clamping / Locking and quick release of workpiece saves cycle time.
QUICK ACTION DRILL VICE
Model
SQV-100 100 38
Max. Jaw Opening
100
Jaw DepthJaw Width
Heavy cast iron construction for rigid clamping.
DRILL MACHINE VICE - HEAVY DUTY
Model
SDV-100 100 46
Max. Jaw Opening
102
Jaw DepthJaw Width
SDV-150 160 52 152
PERMANENT MAGNETIC LIFTER
‘SOGGO’ High power permanent magnets ensure steady power for an unlimited period. All lifting magnets are tested as per safety factor of 1:3.5.
Model
SMPL-1000
Lifting Capacity
1000 kgs
SPML-100
SPML-300
SPML-600
100 kgs
300 kgs
600 kgs
SPML-2000
SPML-3000
2000 kgs
3000 kgs
Model
SHV-4 110
Table Dia
Available in different sizes from 110Ø to 400Ø. Can be mounted horizontally as well as vertically.
HORIZONTAL AND VERTICAL ROTARY TABLE
SHV-16 400
SHV-6 150
SHV-8 200
SHV-12 300
SHV-14 350
SHV-10 250
‘SOGO’ Semi - Universal Index Centre is a simplied type of Universal Index Center and can be used for direct and indirect dividing. No accessories for the differential dividing and spiral work are included. The direct index plate of 24 and three plates in the standard accessories make the indirect dividing possible in any number from 2 to 50 and in certain numbers up to 380.
SSP47MSSP66MSSP510MSSP612M
MILLING AND CNC ACCESSORIES
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
ER COLLETS AND COLLET CHUCK SETS
Following sizes of ER Collet & Collet Chuck sets with spanner in an attractive plastic carry box are available.
ER 32 - BT - 30
15 Pieces Collet Sizes Included In Set
Collet Chuck SetWith Spanner
3-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 12-11, 14-13, 15-14, 16-15, 17-16,
18-17, 20-19
ER 40 - BT - 503-2, 4-3, 5-4, 6-5, 8-7, 10-9, 12-11, 14-13, 15-14, 16-15, 18-17, 20-19,
22-21, 24-23, 26-25
3-2, 4-3, 5-4, 6-5, 8-7, 10-9, 12-11, 14-13, 15-14, 16-15, 18-17, 20-19,
22-21, 24-23, 26-25ER 40 - BT - 40
ER 32 - BT - 403-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 12-11, 14-13, 15-14, 16-15, 17-16,
18-17, 20-19
All below given sizes of ER Collets are available in single piece packing.
ER SPRING COLLETS as per DIN 6499
Collet Type Size - Diameter Range (mm)
ER16 1-0.5, 1.5-1, 2-1.5, 3 -2, 4-3, 5-4, 6-5, 7-6, 8-7,
9-8, 10-9
ER 20 1-0.5, 1.5-1, 2-1.5, 3 -2, 4-3, 5-4, 6-5, 7-6, 8-7,
9-8, 10-9, 11-10, 12-11, 13-12
ER 25 1-0.5, 1.5-1, 2-1.5, 3 -2, 4-3, 5-4, 6-5, 7-6, 8-7,
9-8, 10-9, 11-10, 12-11, 13-12, 14-13, 15-14,
16-15
ER 32 1-0.5, 1.5-1, 2-1.5, 3-2, 3.5-2.5, 4-3, 5-4, 6-5,
7-6, 8-7, 9-8, 10-9, 11-10, 12-11, 13-12, 14-
13, 15-14, 16-15, 17-16, 18-17, 19-18, 20-19
ER 40 3-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 11-10,
12-11, 13-12, 14-13, 15-14, 16-15, 17-16,
18-17, 19-18, 20-19, 21-20, 22-21, 23-22,
24-23, 25-24, 26-25, 27-26, 28-27, 29-28,
30-29
3-2, 4-3, 5-4, 6-5, 7-6, 8-7, 9-8, 10-9, 12-11, 14-13, 15-14, 16-15, 17-16,
18-17, 20-19 ER 32 - BT - 50
DRILLING AND MILLING ACCESSORIES
Following sizes of Pull Studs are available:
PULL STUDS - MAS 403
Sizes
PS - BT30 - 30°
PS - BT30 - 45°
PS - BT40 - 30°
Sizes
PS - BT40 - 45°
PS - BT50 - 30°
PS - BT50 - 45°
Used for tightening the tool in the tool holder outside the machine.
HORIZONTAL / VERTICAL CNC TOOL TIGHTENING FIXTURE
TTF-BT-50
TTF-BT-40
TTF-BT-30 BT-30
BT-40
BT-50
Model Taper
Following spanners are available for tightening and loosening collet chucks of respective sizes.
ER SPANNER
Sizes
ER16 - Open Ended Spanner Type
ER20 - Open Ended Spanner Type
Sizes
ER25 - Star Type
ER32 - Star Type
ER40 - Star Type
Open Ended Type
Star Type
Hardened high grade steel, precision ground.
ER COLLECT CHUCKS
Sizes Sizes
BT30 - ER16 x 70
BT30 - ER20 x 70
BT30 - ER25 x 70
BT30 - ER32 x 70
BT30 - ER40 x 80
BT40 - ER16 x 70
BT40 - ER20 x 70
BT40 - ER25 x 70
BT40 - ER32 x 70
BT40 - ER32 x 100
BT40 - ER40 x 80
BT50 - ER16 x 70
BT50 - ER20 x 70
BT50 - ER25 x 70
BT50 - ER32 x 80
BT50 - ER40 x 80
Hardened high grade steel, precision ground.
SIDE LOCK ADAPTOR (End Mill Holder)
Sizes
BT40 - SLA 8 dia x 50
BT40 - SLA 10 dia x 63
BT40 - SLA 12 dia x 63
BT40 - SLA 16 dia x 63
BT40 - SLA 20 dia x 70
BT40 - SLA 25 dia x 90
Sizes
BT40 - SLA 32 dia x 100
BT40 - SLA 40 dia x 120
BT50 - SLA 20 dia x 80
BT50 - SLA 25 dia x 100
BT50 - SLA 32 dia x 100
BT50 - SLA 40 dia x 120
Hardened high grade steel, precision ground.
SHELL MILL ARBOR
Sizes
BT40 - 22 dia x 60
BT40 - 22 dia x 100
BT40 - 27 dia x 60
BT40 - 27 dia x 105
Sizes
BT40 - 32 dia x 60
BT50 - 27 dia x 105
BT50 - 32 dia x 60
UNIVERSAL ARM MAGNETIC STAND : Model MS-80
q Rigid locking of the stand by one central knob.
q Magnetic Base with ON / OFF Switch size : H55 x W50 x L63.
q Magnetic Pull : 80 Kgs.
q Dial Holder hole ID = 8mm with micro adjustment.
q Main stem height = 290 mm.
SOGGOMARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
2928
TWO-WAY ANGLE MILLING VICE
Model
STW-4
STW-5
STW-6
100
125
160
41
45
50
Max. Jaw Opening
80
95
125
Jaw DepthJaw Width
q Made of high grade cast iron.
q The vice can be adjusted and locked at any angle from the horizontal position to the vertical position and also has swivelling base with rotation of 360°.
q Parallelism and square within 0.025mm/100mm.
q Special segment mechanism minimizes jaw lift and Workpiece tilt.
q Ductile iron construction for high durability.
ANGLOCK MILLING VICE
Model
SLV-4
SLV-6
SLV-6L
SLV-8
100
160
160
200
32
45
45
50
Max. Jaw Opening
100
150
190
190
Jaw DepthJaw Width
All above models available with or without swivel base.
OverallLength
310
412
425
500
UNIVERSAL INDEX CENTER (DIVIDING HEAD)
Standard accessories include dividing plate A, B, C, tail stock and complete set of gears.
SEMI - UNIVERSAL INDEX CENTER (DIVIDING HEAD)
‘SOGGO’ Universal Index Centre has been designed to carry out all types of gear cutting. The center face can be tilted from a horizontal position of 90° down to -10° from vertical, and inclinations can be read off a scale graduated in degrees. The center is built to highest engineering standards and is factory inspected and tested to assure complete satisfaction. The ratio of worm to gear is 1:40.
Standard accessories include dividing plate A, B, C and tail stock.
Chuck not included.
Chuck not included.
Model
SBS - 2
Centre Height
133
Centre Taper
MT4
Model
SBS - 0
Centre Height
100
Centre Taper
MT2
SBS - 1 128 MT3
SOGGO
2524
Most suitable for production setups on Drilling or Light milling operations. Rapid Clamping / Locking and quick release of workpiece saves cycle time.
QUICK ACTION DRILL VICE
Model
SQV-100 100 38
Max. Jaw Opening
100
Jaw DepthJaw Width
Heavy cast iron construction for rigid clamping.
DRILL MACHINE VICE - HEAVY DUTY
Model
SDV-100 100 46
Max. Jaw Opening
102
Jaw DepthJaw Width
SDV-150 160 52 152
PERMANENT MAGNETIC LIFTER
‘SOGGO’ High power permanent magnets ensure steady power for an unlimited period. All lifting magnets are tested as per safety factor of 1:3.5.
Model
SMPL-1000
Lifting Capacity
1000 kgs
SPML-100
SPML-300
SPML-600
100 kgs
300 kgs
600 kgs
SPML-2000
SPML-3000
2000 kgs
3000 kgs
Model
SHV-4 110
Table Dia
Available in different sizes from 110Ø to 400Ø. Can be mounted horizontally as well as vertically.
HORIZONTAL AND VERTICAL ROTARY TABLE
SHV-16 400
SHV-6 150
SHV-8 200
SHV-12 300
SHV-14 350
SHV-10 250
‘SOGO’ Semi - Universal Index Centre is a simplied type of Universal Index Center and can be used for direct and indirect dividing. No accessories for the differential dividing and spiral work are included. The direct index plate of 24 and three plates in the standard accessories make the indirect dividing possible in any number from 2 to 50 and in certain numbers up to 380.
SSP47MSSP66MSSP510MSSP612M
MANUAL CHUCKS
CHUCKS FOR PRODUCTION MACHINING, EDM AND WIRECUT EDM
HM 80ECHUCK FOR MILLING
HL- 110ECHUCK FOR LATHE & MILLING
HW- 128ECHUCK FOR WIRECUT EDM & MILLING
HE- 65ECHUCK FOR EDM
QUICK MANUAL CHUCKS
PNEUMATIC CHUCKS
Ask us for more details on CGM Products or visit www.cgmchuck.com
ELECTRODE / WORKPIECE HOLDERS AND WIRECUT EDM ACCESSORIES
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
FOR TOOL / DIE MAKING AND PRODUCTION
2µm REPEAT POSITIONING ACCURACY
• • • • • WORKPIECE FIXTURING MAKING ELECTRODES EDM SINKING WIRECUT EDMING MEASURING
QL-110ECHUCK FOR LATHE & MILLING
QW-128ECHUCK FOR WIRECUT & MILLING
QE-84ECHUCK FOR EDM & MILLING
QE-88ECHUCK FOR EDM & MILLING
AE-88ECHUCK FOR EDM & MILLING
AE-88EWCHUCK FOR EDM & MILLING
AM-138EPCCHUCK FOR MILLING
ELECTRODE ADJUSTING
HEAD
ELECTRODE /WORKPIECE HOLDERS
DRAWBARS
WIRECUT EDM WORKHOLDERS
STAINLESSSTEEL
26
MANUAL CHUCKS
CHUCKS FOR PRODUCTION MACHINING, EDM AND WIRECUT EDM
HM 80ECHUCK FOR MILLING
HL- 110ECHUCK FOR LATHE & MILLING
HW- 128ECHUCK FOR WIRECUT EDM & MILLING
HE- 65ECHUCK FOR EDM
QUICK MANUAL CHUCKS
PNEUMATIC CHUCKS
Ask us for more details on CGM Products or visit www.cgmchuck.com
ELECTRODE / WORKPIECE HOLDERS AND WIRECUT EDM ACCESSORIES
MARKETED IN INDIA BY ABBOTT TOOLFAST PVT. LTD.
FOR TOOL / DIE MAKING AND PRODUCTION
2µm REPEAT POSITIONING ACCURACY
• • • • • WORKPIECE FIXTURING MAKING ELECTRODES EDM SINKING WIRECUT EDMING MEASURING
QL-110ECHUCK FOR LATHE & MILLING
QW-128ECHUCK FOR WIRECUT & MILLING
QE-84ECHUCK FOR EDM & MILLING
QE-88ECHUCK FOR EDM & MILLING
AE-88ECHUCK FOR EDM & MILLING
AE-88EWCHUCK FOR EDM & MILLING
AM-138EPCCHUCK FOR MILLING
ELECTRODE ADJUSTING
HEAD
ELECTRODE /WORKPIECE HOLDERS
DRAWBARS
WIRECUT EDM WORKHOLDERS
STAINLESSSTEEL
26
Apart from our worldwide customers,
these and many more in India are among
USERS OF PRODUCTS
Plot No. 16, Sector-27A, Faridabad - 121003, Haryana, IndiaPh.: +91-129-4042237, 4133981, 4133982, 4133983Email: [email protected], [email protected]: www.toolfastclamps.com
Distributor: