CEDAR Series The CEDAR platform has been designed to address the requirements of numerous signal processing modules. Easily-installed components simplify maintenance and upgrade.
To learn more about Ogden CEDAR series signal processing platform and modular products, please visit www.ogdentec.com.
CE
DA
R S
ER
IES
132 An Expert in Signal Management Ogden Technology Corporation
CEDAR is a reliable wideband signal processing platform featuring flexible configurations. It supports 1RU and 2RU frames. CEDAR provides power supply, HD/SD video sync reference and audio sync reference for all the internal modules. Multiple control interfaces include LAN and RS-232/422. It is equipped with LCD display and buttons on the front panel for status indication and control.
CEDAR uses front-pluggable power supply unit, control module and rear-pluggable functional modules. With easily-installed components, CEDAR can be maintained and upgraded easily.
CEDAR supports redundant power supply. The internal cooling assembly is controlled by a temperature detector located in the frame center. It creates a safe and reliable operating environment for the modules.
CEDAR uses dual built-in video synchronization signal generators and dual audio synchronization signal generators. Video and audio sync clock signal on each channel is associated with genlock unit. This design contributes to interference suppression and clock jitter reduction. CEDAR uses redundant design for the generator and the genlock unit; one primary and one backup. The platform detects the operating status of the primary and backup units on a real-time basis and performs auto-switching when necessary.
CEDAR distributes sync signals to modules in the frame. The modules can then separately pick up the desired signals according to the supported signal system.
The frame and modules can be controlled through the local front panel which is equipped with LCD display and status LEDs.
CEDAR uses built-in RS-232/422 Hub and Ethernet Switcher that directly interface with the modules. This design provides transparent transmission for signals and eliminates protocol nonconformity.
CEDAR, as an A/V signal processing plat form used in the broadcasting and TV industry, can hold numerous HD/SD video and audio modules. Various module functions include keying, logo generation, emergency switching, audio processing, up/down switching, embedding, de-embedding, distribution, frame sync and signal conversion.
High-Performance Wideband Signal Processing Platform CEDAR Series
FEATURES
■ Structure— Frame: 1RU (4 slots), 2RU (8 slots)— Redundant and hot-swappable power supply units available in 2RU frame — Front-pluggable control module and power supply units, easy to maintain and upgrade— Rear-pluggable and hot-swappable functional modules, easy to maintain and expand — Unique built-in cooling system— Dual internal detection points for real-time temperature monitoring — LCD display and operational buttons on front panel
■ Communication— Multiple serial ports supporting RS-232 and RS-422 control protocols — Built-in serial port hub, making access of any modules available— Built-in 10M/100Mbps-based Ethernet switcher— LAN interface, providing transparent transmission of module status and signals
■ Sync— Dual sync reference inputs supporting HD/SD video, AES3 and Word Clock— Distributes reference signals directly to slots — Sync signal generator can select any reference source— Both video sync signal generators can generate sync sequence signals, such as H, V, ODD/EVEN and Lock; and also sync clock signals, such as 27/67.5MHz (SD) and 74.25/74.176/148.5/148.35MHz (HD) — Both audio sync signal generators can generate audio sync clock signals, such as 3.072MHz,12.288MHz and 48KHz— Video and audio sync clock is associated with gunlock unit, provides low jitter and high precision— Redundant sync signal generator and genlock unit— Each frame slot can pick up any video or audio sync signal individually
■ Miscellaneous— LCD and buttons control both the frame and the modules — LED indicators for each slot, indicating module presence and status— Multiple indicators for fan, temperature, power supply unit, LAN interface and external reference source — Various alarm indicators
CE
DA
R S
ER
IES
www.ogdentec.com 133 Technical Support: [email protected]
1. Indicators
2. LCD
3. Navigating menu
4. MENU button, CE button and ENTER button
5. Module select button and status indicator
6. Frame system select button and indicator
MENU
SYS
OK
CE
ENTER
C
C
MENU
SYS
OK
CE
ENTER
BACK PANEL
1. Dual power supply connectors
2. Dual sync REF input connectors
3. Ethernet connector
4. RS-422 serial ports
5. RS-232/422 serial port
6. Various functional modules
High-Performance Wideband Signal Processing Platform CEDAR SeriesFRONT PANEL
CE
DA
R S
ER
IES
134 An Expert in Signal Management Ogden Technology Corporation
SPECIFICATIONS
Mechanical
Width…………………………………19 in. (483 mm)Height………………………………1RU (44 mm) 2RU (88 mm)Depth………………………………21 in. (531.5 mm)
Electrical
Power Supply……………………100 ~ 240 V AC ±10%, 47 ~ 63 Hz Power Consumption…………80 W (×2) for 1RU 150 W (×2) for 2RU
Environmental
Operating Temperature……32° ~ 104° F (0° ~ 40° C) Relative Humidity………………10% ~ 90%
Connector REF IN…………………………………BNC (×2)LAN……………………………………RJ-45 (×1) RS-232…………………………………DB-9F (×1) RS-422………………………………DB-9F (×1) for 1RU DB-9F (×2) for 2RUREF Signal
SD Video ……………………………NTSC / 525I (SMPTE 125M/267M) PAL / 625I (ITU-R BT.601-5) 525P / 59.94 (SAMPTE 293M) 625P / 50 (ITU-R BT.1358)HD Video……………………………SAMPTE 274M, SAMPTE 296MAudio …………………………………AES3 48 kHz Word-Clock 96 kHz Word-Clock 192 kHz Word-ClockLAN……………………………………IEEE802.3
CEDAR Series Platform Control SoftwareCD-MASTERCD-MASTER is a system control application designed for CEDAR
High-Performance Wideband Signal Processing Platform. It is
compatible with various module applications. CD-MASTER provides
intuitive graphical interfaces for operating status display and
module control. Users can choose frame-based, module-based or
user-defined control interface. It supports configurable software.
No upgrading is needed when new applications are added.
CD-MASTER is designed to run under Windows Operating Systems.
It interfaces with monitoring computer through switch or hub within
a special LAN; it can also interface with other CEDAR platforms on
an open network through a router.
FEATURES
■ Dedicated control program for each signal processing module in CEDAR series■ Programmable configuration, supports addition of new applications■ It has group system configuration, new module does not need to be upgraded individually ■ Supports TCP and SNMP protocols, remote diagnose and monitoring available ■ Provides various user-friendly monitoring interfaces, such as Frame Management and Module Management ■ Supports Central Management, one-screen monitoring for multiple modules ■ Supports status alarms and records, event log checking
High-Performance Wideband Signal Processing Platform CEDAR Series
Frame Management
CD-MASTER displays the status of the platform via Frame
Management interface. The left section of the interface shows the
list of the frames, and the content below the frame name is the list
of each function module.
The right section of the interface shows frame information. The
upper section is the frame view, including power supply, fan
and modules. The middle section shows frame information and
configuration area, including platform information, alarm and reset
operation. The lower section shows module details.
Three colors are used for LED indicators representing Normal,
Alarm and Fault status.
The Frame Management interface will automatically refresh and
display the newest status when frame information changes.
CE
DA
R S
ER
IES
www.ogdentec.com 135 Technical Support: [email protected]
CD-MASTER can simultaneously monitor status of multiple modules
via Centralized Control interface. Users can add or reduce control
interfaces as needed. Module control window's size and location
are adjustable. When an interface is closed, the location and size of
its module window will be automatically saved.
Module control windows provide complete control for each module's
parameters, status and setting, and displays real-time status
information.
CEDAR Series Platform Control SoftwareCD-MASTERModule Management
CD-MASTER displays the status of the modules via Module
Management interface. The left section of the interface shows the
list of modules placed in the frame. The list can be arranged based
on frame IP address or module type.
In Module Management interface, users can check each module's
address information and activate its control program.
The Module Management interface will automatically refresh and
display the newest status when frame information changes. The
module list displays each module's model number and name of
input and output signals.
Centralized Control
Event Log
CD-MASTER provides Event Log interface for alarm and status
information checking of CEDAR equipment. Event log can be
checked and selected via event time, equipment address and event
type. The system automatically saves the record information of the
latest year.
ORDERING INFORMATION
CD-FM-1RU 1RU CEDAR series frame CD-CB Control module CD-PWR Power supply CD-FM-2RU 2RU CEDAR series frame CD-CB Control module CD-PWR Power supply
CE
DA
R S
ER
IES
136 An Expert in Signal Management Ogden Technology Corporation
SD-SDI Dual-Channel Downstream KeyerCD-DSKnetwork monitoring function of CEDAR. Its various parameters
can be configured and adjusted through CEDAR’ router and the
supporting control software which can also monitor the operating
status and signal status of the module.
FEATURES
■ 2-level keying, hard key and transparent key available
■ 4 selectable keying modes: fade-cut, cut-fade, V-fade and
cut
■ 3 transition speeds: fast, medium and slow
■ Input signal line sync, auto sync with the input reference
signal
■ Reclocking and cable equalizing supported input channels
■ Preview channel
■ Dual analog monitor outputs
■ Supports by-pass protection
■ Supports CEDAR-based network monitoring
■ Non-volatile memory
■ Hot-swappable
BACK MODULE
CD-DSK is a modular SD dual-channel downstream keyer specially
designed to run in a CEDAR frame. It supports 2-level linear keying
process on input SD-SDI digital video graphics.
CD-DSK provides two pairs of key & f i l l inputs and one
program input. Both key inputs can be keyed onto the program
simultaneously or individually. It supports four modes of video
mixing: fade-cut, cut-fade, V-fade and cut. Transition speeds are
fast, medium and slow.
CD-DSK offers dual processed digital program outputs, one analog
monitor output, one digital preview output and one analog preview
monitor output.
CD-DSK can be controlled by a programmable GPI interface or
by the dedicated control panel. It supports one-button triggered
bypass protection. This ensures the program can be output without
interruption even when power is off.
CD-DSK can be housed in a 1RU or 2RU CEDAR frame. It supports
BLOCK DIAGRAM
CE
DA
R S
ER
IES
www.ogdentec.com 137 Technical Support: [email protected]
SPECIFICATIONS
Environmental
Operating Temperature…………32° ~ 104° F (0° ~ 40° C) Relative Humidity…………………10% ~ 90%
Digital Video InputSignal Format………………………SMPTE 259M-C, 270 Mbps, 525/625 componentQuantization…………………………10 bitsConnector……………………………BNC (×5)Impedance……………………………75 ΩReturn Loss…………………………18 dB @ 270 MHzCable EQ………………………………<1000 ft (about 300 m) Belden 1694A cable or equivalent
Digital Video Output Signal Format………………………SMPTE 259M-C, 270 Mbps, 525/625 componentQuantization…………………………10 bits
Connector……………………………………………BNC (×3)Impedance…………………………………………75 ΩReturn Loss…………………………………………18 dB @ 270 MHzAmplitude……………………………………………800 mVp-p ±10%Rise/Fall Time………………………………………400 ~ 1500 ps, 20% ~ 80% of amplitudeOvershoot……………………………………………<10% of amplitudeJitter……………………………………………………<0.2UI
Analog Composite Video Output Signal Format………………………………………CVBSStandards……………………………………………NTSC, PALQuantization………………………………………8 bitsConnector……………………………………………BNC (×2)Power Consumption……………………………10 WImpedance…………………………………………75 ΩAmplitude……………………………………………1.0 Vp-p±3%Chr/Lum Delay Diff………………………………<5 nsS/N Ratio……………………………………………>70 dB @ 6 MHz
CD-DSK Control PanelCD-DSK-PN
SD-SDI Dual-Channel Downstream KeyerCD-DSK
CD-DSK-PN is a remote control panel designed for CD-DSK. It is
used to perform various functions on CD-DSK, including by-pass
protection, selection of key signal, keying mode and keying rate.
Program preview and output can be controlled by the TAKE button.
CD-DSK-PN interfaces with CD-DSK through CAT-5 cable. Remote
control is available via RS-422 interface.
FRONT PANEL
1. By-Pass Select Button
2. Key1 Source Select Button 3. Key2 Source Select Button 4. Cut Button
5. Cut-fade Button 6. V-fade Button 7. Fade-cut Button
8. Rate Select Button 9. Execution Button 10. Double RJ-45 ConnectorsOne acts as RS-422 control interface to connect with CD-DSK, hot-pluggable not supported; the other one is used for control panel expansion, loop-thru supported.
ORDERING INFORMATION
CD-DSK SD dual-channel downstream keyer CD-DSK-PN CD-DSK control panel
BACK PANEL
CE
DA
R S
ER
IES
138 An Expert in Signal Management Ogden Technology Corporation
parameters can be configured and adjusted through CEDAR’s
router and the supporting control software which can also monitor
the operating status and signal status of the module.
FEATURES
■ 3-level keying, hard key and transparent key available,
transparency adjustable
■ 4 selectable keying modes: cut, cut-fade, V-fade and
fade-cut
■ 3 transition speeds: fast, medium and slow
■ Input signal line sync, eradicate jitter from previous routing
switcher
■ Reclocking and cable equalizing supported input channels
■ Preview channel, program output with keyed signals controlled
by TAKE button
■ One HD/SD-SDI preview output
■ Supports by-pass protection
■ Supports CEDAR-based network monitoring
■ Non-volatile memory
■ Hot-swappable
BACK MODULE
HD/SD-SDI Tri-Channel Downstream KeyerCD-DSK-HD
CD-DSK-HD is a modular HD/SD tri-channel downstream keyer
designed to operate in a CEDAR frame. It supports 3-level linear
keying process on input HD/SD-SDI digital video graphics.
CD-DSK-HD provides 3 pairs of key & fill inputs and one program
input. All the key inputs can be keyed onto the program
simultaneously or individually. It supports four modes of video
mixing: fade-cut, cut-fade, V-fade and cut. Transition speeds are
fast, medium and slow.
CD-DSK-HD offers dual processed digital program outputs and one
digital preview output.
CD-DSK-HD can be controlled by a programmable GPI interface or
by the dedicated control panel. It supports one-button triggered
bypass protection. This ensures the program can be output without
interruption even when power is off.
CD-DSK-HD can be housed in a 1RU or 2RU CEDAR frame. It
supports network monitoring function of CEDAR. Its various
BLOCK DIAGRAM
CE
DA
R S
ER
IES
www.ogdentec.com 139 Technical Support: [email protected]
SPECIFICATIONS
Electrical
Power Consumption………10 W
Digital Video Input Signal Standard……………SMPTE 259M SD-SDI, SMPTE 292M HD-SDI Quantization…………………10 bitsConnector……………………BNC (×7)Impedance……………………75 ΩReturn Loss…………………18 dB @ 270 MHz, SD 15 dB @ 1.485 GHz, SDCable EQ………………………<1000 ft (about 300 m), SD <530 ft (about 160 m), HD Belden 1694A cable or equivalent
Digital Video Output Signal Standard……………SMPTE 259M SD-SDI, SMPTE 292M HD-SDI Quantization………………10 bitsConnector……………………BNC(×3) Impedance……………………75 ΩReturn Loss…………………>18 dB @ 270 MHz, SD >12 dB @ 1.485 GHz, HDAmplitude……………………800 mVp-p ±10%Rise/Fall Time………………<800 ps, SD; <135 ps, HD 20% ~ 80% of amplitudeOvershoot……………………<10% of amplitudeJitter……………………………<0.2 UI
HD/SD-SDI Tri-Channel Downstream KeyerCD-DSK-HD
CD-DSK-HD Control PanelCD-DSK-HD-PN
CD-DSK-HD-PN is a remote control panel designed for CD-DSK-HD.
It is used to perform various functions on CD-DSK-HD, including
By-pass, Key Signal Selection, Keying Mode Selection (V-fade,
fade-cut, cut-fade and cut-cut) and Keying Rate Selection. Program
preview and output can be controlled by the TAKE button.
CD-DSK-HD-PN interfaces with CD-DSK-HD through CAT-5 cable.
Remote control is available via RS-422 control.
FRONT PANEL
BACK PANEL
1. By-Pass Select Button2. KEY1 Source Select Button3. KEY2 Source Select Button4. KEY3 Source Select Button5. Cut Button6. Cut-Fade Button7. V-Fade Button
8. Fade-Cut Button9. Rate Select Button10. Execution Button11. Double RJ-45 ConnectorsOne acts as RS-422 control interface to connect with CD-DSK, hot-swappable not supported; the other one is used for control panel expansion, loop-thru supported.
ORDERING INFORMATION
CD-DSK-HD HD / SD-SDI tri-channel downstream keyer CD-DSK-HD-PN CD-DSK-HD control panel
CE
DA
R S
ER
IES
140 An Expert in Signal Management Ogden Technology Corporation
triggering. Automatic cable equalization is up to 1000 ft (about 300 m).
CD-DAP can be controlled through the dedicated control panel. Monitoring of embedded audio and PPM/VU in PGM IN or PST IN channel is available.
CD-DAP is widely used in the broadcasting industry for dynamic control of embedded audio in SD-SDI signals.
FEATURES
■ Analyzes and processes power characteristic of audio signal ■ Dynamic processing of audio signal, including compression, limit, expansion and gain trimming■ Automatic input cable equalizing up to 1000 ft (about 300 m) ■ By-pass protection ■ Selects embedded audio (16 channels) with control panel■ Supports GPI input
BACK MODULE
SD-SDI Digital Audio ProcessorCD-DAP
CD-DAP is a modular digital audio processor designed to work in a CEDAR frame. It analyzes and processes power characteristics of embedded audio signal in SD-SDI; therefore, it offers dynamic processing for the audio signal, including compression, limit, expansion and gain trimming.
CD-DAP provides two SD-SDI inputs with embedded audio (PST IN, PGM IN) and two SD-SDI outputs. It performs de-embedding, characteristic analysis, dynamic control and embedding of the main program input channel (PGM IN). It supports de-embedding and level adjustment of the preview input channel (PST IN). PGM IN channel supports by-pass protection, which ensures the program to be output without any interruption even when power is off. The by-pass protection can be activated through the control panel or GPI
SPECIFICATIONS
Electrical
Power Consumption……………5 W
Environmental
Operating Temperature………32° ~ 104° F (0° ~ 40° C) Relative Humidity…………………10% ~ 90%
Digital Video Input
Signal Format………………………SMPTE 259M-C, 270 Mbps, 625/625 component Signal Standards…………………SMPTE 272M AUX Data Embedding StandardConnector……………………………BNC (×2)Impedance…………………………75 ΩReturn Loss…………………………18 dB @ 270 MHzCable EQ……………………………<1000 ft (about 300 m) Belden 1694A cable or equivalent
Digital Video Output Signal Format………………………SMPTE 259M-C, 270 Mbps, 525/625 componentConnector……………………………BNC (×2)
Impedance………………………………75 ΩReturn Loss……………………………18 dB @ 270 MHzAmplitude………………………………800 mVp-p ±10%Rise/Fall Time…………………………400 ~ 1500 ps, 20%~80% of amplitudeOvershoot………………………………<10% of amplitudeJitter………………………………………<0.12UI
Digital Audio Output
Signal Format…………………………AES3Connector………………………………RJ-45Impedance……………………………110 ΩLevel………………………………………5 Vp-p ±10%
Performance
Gain Adjustment Range……………-20 dB ~ +20 dBCompress Ratio………………………1:1 ~ ∞:1Compress Threshold………………VU: -44 dBFS ~ -4dBFS Expansion Threshold………………-60 dBFS ~ -20 dBFSAttack Time……………………………0.1 ms ~ 500 ms, Compression & ExpansionRelease Time…………………………20 ms ~ 5 s, Compression & ExpansionNoise Threshold………………………-70 dBFS ~ -44 dBFS
BLOCK DIAGRAM
CE
DA
R S
ER
IES
www.ogdentec.com 141 Technical Support: [email protected]
cable equalization is up to 1000 ft (about 300 m).CD-DAP-HD can be controlled through the dedicated control panel. Monitoring of embedded audio and PPM/VU on PGM IN or PST IN channel is available.
CD-DAP-HD is widely used in the broadcasting industry for dynamic control of embedded audio in HD/SD-SDI signals.
FEATURES
■ Analyzes and processes power and loudness characteristics of audio signal ■ Dynamic processing of audio signal, including compression, limit, expansion and gain trimming■ Selectable compression or expansion threshold according to audio VU or loudness ■ Automatic loudness control■ Automatic cable equalizing up to 1000 ft (about 300 m) for SD; and 500 ft (about 160 m) for HD ■ By-pass protection ■ Selects embedded audio (8 channels) with control panel■ Supports GPI input
BACK MODULE
HD / SD-SDI Digital Audio Processor CD-DAP-HD
CD-DAP-HD is a modular digital audio processor designed to work in a CEDAR frame. It analyzes and processes power and loudness characteristic for embedded audio signal in HD/SD-SDI; therefore, it offers dynamic processing of audio signal, including audio compression, limit, expansion and gain trimming. Additionally, the compression or expansion threshold can be selected according to audio UV or loudness.
CD-DAP-HD provides two digital signal inputs with embedded audio (PST IN, PGM IN) and two digital signal outputs (PGM OUT1, PGM OUT2). It performs de-embedding, characteristic analysis, dynamic control and embedding of the main program input channel (PGM IN). It supports de-embedding and level adjustment of the preview input channel (PST IN). PGM IN channel supports by-pass protection, which ensures the program to be output without any interruption even when power is off. The by-pass protection can be activated through the control panel or GPI triggering. Automatic
BLOCK DIAGRAM
SPECIFICATIONS
ElectricalPower Consumption…………………5 W
Environmental Operating Temperature……………32° ~ 104° F (0° ~ 40° C) Relative Humidity……………………10% ~ 90%
Digital Video Input Signal Format…………………………SMPTE 259M SD-SDI, SMPTE 292M HD-SDISignal Standards……………………SMPTE 272M and SMPTE 299MConnector………………………………BNC (×2) Impedance………………………………75 ΩReturn Loss……………………………>18 dB @ 270 MHz, SD >15 dB @ 1.485 GHz, HDDigital Video Output Signal Format…………………………SMPTE 259M, SMPTE 292MConnector………………………………BNC (×2) Impedance……………………………75 ΩReturn Loss……………………………>12 dB @ 5 MHz ~ 1.5 GHz
Amplitude……………………………800 mVp-p ±10%Rise/Fall Time………………………400 ~ 1500 ps, 20% ~ 80% of amplitudeOvershoot……………………………<10% of amplitudeJitter……………………………………<0.12 UI, SD <0.2 UI, HDDigital Audio Output Signal Format………………………AES3Connector……………………………RJ-45Impedance…………………………110 ΩLevel……………………………………5 Vp-p ±10%
Performance Gain Adjustment Range…………-20 dB ~ +20 dBCompress Ratio……………………1:1 ~ ∞:1Compress Threshold……………VU: -44 dBFS ~ -4 dBFS Loudness: -54 dBFS ~ -14 dBFSExpansion Threshold……………-60 dBFS ~ -20 dBFS, Loudness & VUAttack Time…………………………0.1 ms ~ 500 ms, Compression & ExpansionRelease Time………………………20 ms ~ 5 s, Compression & ExpansionNoise Threshold……………………-70 dBFS ~ -44 dBFS
CE
DA
R S
ER
IES
142 An Expert in Signal Management Ogden Technology Corporation
CD-DAP / CD-DAP-HD Control PanelCD-DAP-PN
CD-DAP-PN is a remote control panel for CD-DAP / CD-DAP-HD. The parameters of CD-DAP can be set via the control panel. The audio embedded in PGM IN / PST IN and the value of PPM / VU can be monitored.
CD-DAP-PN connects to CD-DAP via a single CAT-5 cable for remote control.
FEATURES
■ Controls the status and parameters of CD-DAP or CD-DAP-HD ■ Monitors embedded audio of CD-DAP or CD-DAP-HD ■ Two 30-segment LED audio meters, displays PPM / VU value (indication range: -66 dBFS ~ 0 dBFS) ■ Recalls preset status and sets user-defined status
SPECIFICATIONS
Mechanical
Width………………………………………………19 in. (483 mm)Height………………………………………………1RU (44 mm) Depth………………………………………………5.6 in. (141 mm)
Electrical
Power………………………………………………10 WPower Supply……………………………………80 ~ 260 V ACPower Consumption…………………………50 W
Environmental
Operating Temperature……………………32° ~ 104° F (0° ~ 40°C) Relative Humidity……………………………10% ~ 90%
Digital Audio Input Signal Format………………………………………AES3Connector……………………………………………RJ-45 (×2), loop-thru Impedance…………………………………………110 ΩLevel……………………………………………………2 ~ 7 Vp-p
Control Interfaces
RS-485…………………………………………………RJ-45 (×2), loop-thruGPI/O…………………………………………………DB-25F (×1)
Speaker Output Impedance……………………………………………8 ΩFrequency Range…………………………………20 Hz ~ 20 kHz
1. Loudspeaker 2. LCD display 3. Audio monitor select switch 4. 30-segment audio meter 5. Presetting status select indicators 6. By-pass switch 7. Monitoring volume control
ORDERING INFORMATION
CD-DAP SD-SDI digital audio processor CD-DAP-HD HD / SD-SDI digital audio processor CD-DAP-PN CD-DAP / CD-DAP-HD control panel
8. Presetting status recall select button 9. Adjusting function select button10. Power supply input connector 11. GPIO connector 12. Remote interface13. Analog audio output connectors
BLOCK DIAGRAM
■ GPI trigger, quick audio processing ■ Intuitive LCD menu display
FRONT PANEL
BACK PANEL
CE
DA
R S
ER
IES
www.ogdentec.com 143 Technical Support: [email protected]
CD-ECO supports GPI triggering and dedicated control panel.
CD-ECO is housed in a 1RU or 2RU CEDAR frame. It supports CEDAR-based network monitoring. Its parameters can be configured and adjusted through CEDAR router and the supporting control software which is also used to monitor the operating status and signal status of the module.
FEATURES
■ Dual built-in frame synchronizer, auto-sync and seamless switching available ■ Detects embedded audio presence ■ Selectable duration for judging audio loss, including 20 s, 30 s, 40 s, 50 s and 60 s■ Supports analog video output monitoring■ Supports by-pass protection for main input channel ■ Optional operating modes: Auto and Manual ■ Supports GPI triggering■ Supports remote control panel ■ Hot-swappable■ Supports PD-based network monitoring
BACK MODULE
SD-SDI 2×1 Auto-Sync Emergency Changeover CD-ECO
CD-ECO is a modular and 2×1 auto-sync emergency changeover specially designed to work in a CEDAR frame. It performs synchronization according to the external reference signal or the main signal. The main input SD-SDI signal and the backup input SD-SDI signal are automatically synchronous for seamless and clean switching.
CD-ECO provides two SD-SDI inputs (MAIN, BACK-UP) and two outputs (SDI, CVBS/SDI). The SDI output channel supports by-pass protection, which ensures the program can be output without interruption; and the SDI/CVBS output channel can be configured for either SD-SDI output or CVBS output as needed.
CD-ECO detects the presence of SD-SDI signal and the embedded audio on a real-time basis. It identifies the absent signal according to the predetermined conditions. In case of loss, CD-ECO will route the corresponding valid signal to the output channel under automation; while send alarm to the control panel to alert the operator’s for manual switching.
BLOCK DIAGRAM
SPECIFICATIONS
ElectricalPower Consumption……………8 W
Environmental Operating Temperature………32° ~ 104° F (0° ~ 40° C) Relative Humidity………………10% ~ 90%
Input Signal Format……………………SMPTE 259M-C, 270 Mbps, 525/625 componentConnector…………………………BNC (×2)Impedance…………………………75 ΩReturn Loss………………………18 dB @ 270 MHzCable EQ……………………………<1000 ft (about 300 m) Belden 1694A cable or equivalent
Output Signal Format………………………SMPTE 259M-C, 270 Mbps, 525/625 componentConnector……………………………BNC (×1)Impedance……………………………75 ΩReturn Loss…………………………18 dB @ 270 MHzAmplitude……………………………800 mVp-p ±10%Jitter……………………………………<0.12 UIRise/Fall Time………………………400 ~ 1500 ps, 20% ~ 80% of amplitudeOvershoot……………………………<10% of amplitude
Analog Monitoring OutputSignal Format………………………CVBSSystem…………………………………NTSC, PALQuantization…………………………8 bitsConnector……………………………BNC (×1)Impedance……………………………75 ΩAmplitude……………………………1.0 Vp-p ±3%Chr/Lum Delay Diff………………<5 nsS/N Ratio………………………………>70 dB @ 6 MHz