HOLIDAY KITCHENS120 West Allen StreetRice Lake, WI 54868
Voice: (715) 736-9200 FAX: 1-800-497-4314
www.holidaykitchens.com
email to: [email protected]
QualityDesigned forQualityLiving
Effective March 1, 2007
INTERNATIONALDESIGN COLLECTION
Cabinet Specification Guide
March 1, 2007
IDC INDEXProduct Catalog# Page#
ACCENT STRIPS 7220 IS146
APPLIANCE PANELS:
Dishwasher 7130 IS143
Trash Compactor 7140 IS144
Refrigerator 7150 IS144
BAR CONSOLES 7276 IS151
BASE CABINETS:
Angle Corner Shelf (Straight & Diagonal) 2280 IS56
Angled Base 2055 IS43
Base (angled) 2050 IS43
Base (standard) 2000 IS39
Blind Corner 2080 IS44
Blind Corner Full Height with Magic Corner 2105 IS46
Blind Corner Special 2100 IS45
Chef’s Pantry 2070 IS44
Cook ’N Vent 2260 IS55
Diagonal Corner (full height) 2132 IS49
Diagonal Corner (standard) 2130 IS48
Diagonal Corner with Susans (full height) 2133 IS50
Diagonal Corner with Susans (standard) 2131 IS48
Diagonal Sink 2220 IS54
Diagonal Sink Front 2230 IS54
Dishwasher Cabinet 2380 IS58
Drop In Range 2160 IS51
Farm Sink 2172 IS52
Five Drawer 2045 IS42
Four Drawer 2040 IS42
Full Height, 24 Deep 2010 IS39
Full Height Wall, 12 Deep 2020 IS40
Full Height with Pull Out 2023 IS40
Full Height Angled with Pull Out 2024 IS41
Full Height Narrow Base with Pull Outs 2025 IS41
Full Height Narrow Base Angled withPull Out
2026 IS41
Half Round with Doors 2320 IS57
Micro Opening (standard) 2135 IS50
Micro Opening (drawer stack) 2137 IS50
Pantry 2060 IS43
Peninsula Corner 2090 IS45
Radius Door 2310 IS56
Radius Tambour 2300 IS56
Range 2170 IS52
Range Front 2140 IS51
Range Front Drawer 2150 IS51
Recessed Diagonal Sink 2240 IS55
Sink 2170 IS52
Sink, Farm 2172 IS52
Sink Clipped Corners 2175 IS53
Sink Drawers 2180 IS53
Product Catalog# Page#
BASE CABINETS (CONTINUED):
Sink Front 2190 IS53
Spice Drawer 2370 IS58
Square Corner 2120 IS47
Square Corner Revolving 2110 IS46
Square Corner with Susans 2121 IS47
Square Corner Radius with Door 2270 IS55
Square Corner Sink 2200 IS54
Square Corner with Four Drawers 2124 IS48
Square Corner with Three Drawers 2123 IS47
Three Drawer 2030 IS42
Transition (12 wide) 2330 IS57
Transition (over 12 wide) 2340 IS57
Warming Drawer (standard) 2135 IS50
Warming Drawer (drawer stack) 2137 IS50
Wine Insert Cabinet 2395 IS58
BASE CABINET ACCESSORIES:
Angled End Panel 3030 IS78
Accent Strips 3010 IS77
Beverage Drawer 2860 IS71
Blumotion, Rollouts 2850 IS71
Breadboards 2750 IS68
Castors 2970 IS75
Clipo Sliding Door Hardware 2995 IS75
Dinnerware Insert 3050 IS78
Drawer Divider 2960 IS74
End Panel 3040 IS78
Fillers 3000 IS76
Fillers (Pull Out) 3007 IS76
Fillers With Half Spool & Rod Post (3 ) 3005 IS76
Hidden Can Rack 2830 IS71
Island Support Leg 2870 IS72
Knife Block Insert 2885 IS72
Marco Bread & Knife Drawer 2930 IS73
Mixer Lift Up Shelf 2780 IS69
Open End Shelves 2740 IS68
ORGA-LINE Plate Holder 3060 IS79
ORGA-LINE Drawer Inserts For Dodd’swith TandemPlus
3070 IS79
ORGA-LINE Drawer Inserts For IDCTandembox
3080 IS80
Pantry Spice Rack 2720 IS67
Pull Out Angled Shelf/Shelf - Loose 2026 IS41
Pull Out Chopping Block 2760 IS68
Pull Out Grid 3090 IS81
Pull Out Ironing Board 2920 IS73
Pull Out Recycling Center 2800 IS70
Pull Out Shelf/Shelf - Loose 2025 IS41
Pull Out Towel Bar/Shelf - Loose 2025 IS41
Pull Out Tray Holder - Loose 2025 IS41
iMarch 1, 2007
IDC INDEXProduct Catalog# Page#
BASE CABINET ACCESSORIES (CONTINUED):
Radius Ends 3020 IS77
Rollout Shelves 2850 IS71
Silverware Divider 2880 IS72
Sink Matting 3100 IS81
Slide Out Towel 2820 IS70
Slide Out Wastebaskets (wire) 2795 IS70
Slide Out Wastebaskets (wood) 2790 IS69
Sliding Bread Cover 2890 IS72
Super Susan 2700 IS67
Tilt Out Storage Bin 2730 IS67
Tray Divider 2910 IS73
Vertical Divider 2940 IS74
Vinyl Spice Insert 2950 IS74
Wicker Baskets 3110 IS81
Wire Pull Out 2990 IS75
BASE CABINET MODIFICATIONS:
Add Blind 2520 IS61
Angled Front and/or Sides 2550 IS62
Back Modification 2595 IS65
Blumotion, Drawers 2590 IS64
Clipped Corner 2555 IS63
Cutdown Cabinet 2570 IS63
Cutdown Drawer 2460 IS60
Decorative Door Applied Base 2495 IS61
Door End Of 2480 IS60
Door Modifications 2530 IS62
Drawer Modifications 2590 IS64
Extend Side Down and/or Back 2600 IS65
Finished Back 2595 IS65
Finished Interior 2400 IS59
Flush Finished Top 2405 IS59
Flush Toe 2440 IS59
One Piece Units 2500 IS61
Oversize Cabinet 2560 IS63
Peninsula 2470 IS60
Pipe Chase 2540 IS62
Toe Modifications 2575 IS64
Real Wood Edgebanding 2630 IS65
Shelf Modifications 2580 IS64
BLUM BI-FOLD HINGE 2120 IS47
BLUMOTION, DRAWERS 2590 IS64
BLUMOTION, ROLLOUTS 2850 IS71
BOOKCASE 1250 IS16
CHANGE ORDER CHARGE IS1
CHOPPING BLOCK (LOOSE) 7280 IS152
CIRCLE ROUTES 7040 IS136
COLUMNS 7170 IS145
Product Catalog# Page#
COMMERCIAL UPGRADES 7430 IS162
DESK DRAWERS 6280 IS130
DISHWASHER PANEL 7130 IS143
DOOR PADS 7280 IS152
DOORS ONLY (LOOSE) 7190 IS145
DOOR STYLE CHARGES IS168
DOOR STYLE CHARGES (RADIUS) IS171
DOOR STYLE CHARGES (SPECIAL ORDER) IS171
DRAWER FRONTS (LOOSE) 7210 IS145
DRAWER GUIDES (LOOSE) 7295 IS153
ENTERTAINMENT DOOR HARDWARE(POCKET DOORS)
7350 IS156
FACE FRAME (3/4 ) 7100 IS143
FEET (FURNITURE) 7407 IS161
FEET (BUN) 7400 IS159
FEET (CORNER BUN) 7403 IS159
FILE DRAWERS 6270 IS129
FILLERS 7230 IS147
FILLERS WITH HALF SPOOL & RODPOST ATTACHED
7235 IS149
FINISH MATERIALS 7320 IS155
FINISH PRICING 7310 IS154
FINISHED ENDS (STANDARD ATTACHED) 7082 IS141
FLOOR, DIAGONAL SINK FRONT (LOOSE) 2230 IS54
FLOOR, SINK FRONT (LOOSE) 2190 IS53
FLUTING 7030 IS136
FURNITURE FEET 7407 IS161
HALF SPOOL 7396 IS158
HARDWOOD (SOLID MATERIAL) 7097 IS142
HARDWOOD TOPS 7120 IS143
HINGES (LOOSE) 7290 IS152
HOODS:
Hood Blower Units 1960 IS38
Vent-A-Hood Blower/Liner Units 1970 IS38
Wood Hoods IS38
HPL UPCHARGE 7300 IS153
INSET MOLDING END PANELS 7410 IS161
ISLAND PANEL 7095 IS142
KITCHEN ISLAND LEGS (SOLID WOOD) 7395 IS157
KITCHEN ISLAND LEGS, EXTENDED(SOLID WOOD)
7395.5 IS158
LEGS (SUPPORT) 7405 IS160
LIGHT BAFFLE 7060 IS137
LOCKS INSTALLED 7280 IS152
MATERIAL PRICING 7300 IS153
ii March 1, 2007
IDC INDEXProduct Catalog# Page#
METAL SHELF STANDARDS 7280 IS152
MIRROR FRAME 6290 IS130
MOLDINGS:
Foil Wrapped 7065 IS140
Laminate 7067 IS140
Special Order 7070 IS141
Wood 7060 IS137
Wood Molding Configuration Ideas 7062 IS139
OVEN CABINETS:
Cutout Panels 5090 IS118
Double (83 h x 24 d) 5030 IS115
Double (84 h x 24 d) 5030 IS115
Double (89 h x 24 d) 5040 IS116
Double (90 h x 24 d) 5040 IS116
Double (95 h x 24 d) 5050 IS116
Double (96 h x 24 d) 5050 IS116
Micro (83 h x 24 d) 5060 IS117
Micro (84 h x 24 d) 5060 IS117
Micro (89 h x 24 d) 5070 IS117
Micro (90 h x 24 d) 5070 IS117
Micro (95 h x 24 d) 5080 IS118
Micro (96 h x 24 d) 5080 IS118
Single (83 h x 24 d) 5000 IS114
Single (84 h x 24 d) 5000 IS114
Single (89 h x 24 d) 5010 IS114
Single (90 h x 24 d) 5010 IS114
Single (95 h x 24 d) 5020 IS115
Single (96 h x 24 d) 5020 IS115
PANELING/PLYWOOD/PARTICLE BOARD 7090 IS142
POLISH KIT 7320 IS155
POSTS 7170 IS145
POSTS, SPOOL & ROD 7396 IS158
RADIUS DOOR STYLE CHARGES IS171
RADIUS END PANELS 7240 IS150
RAYMOND ENKEBOLL COLLECTION 7500751075207530
IS162IS163IS163IS164
REAL WOOD EDGEBANDING:
Base Cabinets 2630 IS65
Tall Cabinets 4680 IS108
Wall Cabinets 1650 IS26
REFRIGERATOR PANEL 7150 IS144
SALES AIDS 7600 IS165
Product Catalog# Page#
SHELVING:
Shelf Clips 7280 IS152
Shelf Standards 7280 IS152
Shelf Supports 7275 IS151
Shelves (loose) 7270 IS150
Shelf Suspension Systems 7406 IS160
SHOP CHARGE IS1
SOFFIT CLOSURE PANELS 7020 IS136
SOLID MATERIAL 7100 IS143
SPINDLES (SOLID WOOD) 7390 IS156
STAIN (QUART, GALLON) 7320 IS155
SUPPORT LEGS 7405 IS160
TALL CABINETS:
Broom Cabinets:
Standard (83 h x 12 d) 4000 IS83
Standard (83 h x 24 d) 4005 IS83
Standard (84 h x 12 d) 4000 IS83
Standard (84 h x 24 d) 4005 IS83
Standard (89 h x 12 d) 4007 IS84
Standard (89 h x 24 d) 4009 IS84
Standard (90 h x 12 d) 4007 IS84
Standard (90 h x 24 d) 4009 IS84
Standard (95 h x 12 d) 4010 IS85
Standard (95 h x 24 d) 4015 IS85
Standard (96 h x 12 d) 4010 IS85
Standard (96 h x 24 d) 4015 IS85
Angled (83 h x 24 d) 4060 IS95
Angled (84 h x 24 d) 4060 IS95
Angled (89 h x 24 d) 4063 IS96
Angled (90 h x 24 d) 4063 IS96
Angled (95 h x 24 d) 4065 IS96
Angled (96 h x 24 d) 4065 IS96
Drawer (83 h x 24 d) 4020 IS87
Drawer (84 h x 24 d) 4020 IS87
Drawer (89 h x 24 d) 4022 IS88
Drawer (90 h x 24 d) 4022 IS88
Drawer (95 h x 24 d) 4025 IS88
Drawer (96 h x 24 d) 4025 IS88
Equal Doors (65 h x 12 d) 4034 IS90
Equal Doors (65 h x 24 d) 4036 IS90
Full Height (65 h x 12 d) 4030 IS89
Full Height (65 h x 24 d) 4032 IS89
Gourmet Pantry (83 h x 24 d) 4076 IS99
Gourmet Pantry (84 h x 24 d) 4076 IS99
Gourmet Pantry (89 h x 24 d) 4076.5 IS100
Gourmet Pantry (90 h x 24 d) 4076.5 IS100
iiiMarch 1, 2007
IDC INDEXProduct Catalog# Page#
TALL CABINETS (CONTINUED):
Broom Cabinets (continued):
Gourmet Pantry (95 h x 24 d) 4077 IS100
Gourmet Pantry (96 h x 24 d) 4077 IS100
Pantry (83 h x 24 d) 4080 IS101
Pantry (84 h x 24 d) 4080 IS101
Pantry (89 h x 24 d) 4083 IS101
Pantry (90 h x 24 d) 4083 IS101
Pantry (95 h x 24 d) 4085 IS102
Pantry (96 h x 24 d) 4085 IS102
Pantry Drawers (83 h x 24 d) 4100 IS102
Pantry Drawers (84 h x 24 d) 4100 IS102
Pantry Drawers (89 h x 24 d) 4103 IS103
Pantry Drawers (90 h x 24 d) 4103 IS103
Pantry Drawers (95 h x 24 d) 4105 IS103
Pantry Drawers (96 h x 24 d) 4105 IS103
Pull Out Pantry (83 h x 24 d) 4017 IS86
Pull Out Pantry (84 h x 24 d) 4017 IS86
Pull Out Pantry (89 h x 24 d) 4017.5 IS86
Pull Out Pantry (90 h x 24 d) 4017.5 IS86
Pull Out Pantry (95 h x 24 d) 4018 IS87
Pull Out Pantry (96 h x 24 d) 4018 IS87
Reverse (83 h x 12 d) 4040 IS91
Reverse (83 h x 24 d) 4042 IS91
Reverse (84 h x 12 d) 4040 IS91
Reverse (84 h x 24 d) 4042 IS91
Reverse (89 h x 12 d) 4043 IS92
Reverse (89 h x 24 d) 4043.5 IS92
Reverse (90 h x 12 d) 4043 IS92
Reverse (90 h x 24 d) 4043.5 IS92
Reverse (95 h x 12 d) 4044 IS93
Reverse (95 h x 24 d) 4046 IS93
Reverse (96 h x 12 d) 4044 IS93
Reverse (96 h x 24 d) 4046 IS93
Reverse Drawer (83 h x 24 d) 4050 IS94
Reverse Drawer (84 h x 24 d) 4050 IS94
Reverse Drawer (89 h x 24 d) 4053 IS94
Reverse Drawer (90 h x 24 d) 4053 IS94
Reverse Drawer (95 h x 24 d) 4055 IS95
Reverse Drawer (96 h x 24 d) 4055 IS95
Reverse with Gourmet Pantry(89 h x 24 d)
4074.5 IS98
Reverse with Gourmet Pantry(90 h x 24 d)
4074.5 IS98
Reverse with Gourmet Pantry(95 h x 24 d)
4075 IS99
Reverse with Gourmet Pantry(96 h x 24 d)
4075 IS99
Reverse with Tandem SwivelingPull Out (83 h x 24 d)
4070 IS97
Product Catalog# Page#
TALL CABINETS (CONTINUED):
Broom Cabinets (continued):
Reverse with Tandem SwivelingPull Out (84 h x 24 d)
4070 4070
Reverse with Tandem SwivelingPull Out (89 h x 24 d)
4070.5 IS97
Reverse with Tandem SwivelingPull Out (90 h x 24 d)
4070.5 IS97
Reverse with Tandem SwivelingPull Out (95 h x 24 d)
4071 IS98
Reverse with Tandem SwivelingPull Out (96 h x 24 d)
4071 IS98
Oven Cabinets:
Double (83 h x 24 d) 5030 IS115
Double (84 h x 24 d) 5030 IS115
Double (89 h x 24 d) 5040 IS116
Double (90 h x 24 d) 5040 IS116
Double (95 h x 24 d) 5050 IS116
Double (96 h x 24 d) 5050 IS116
Micro (83 h x 24 d) 5060 IS117
Micro (84 h x 24 d) 5060 IS117
Micro (89 h x 24 d) 5070 IS117
Micro (90 h x 24 d) 5070 IS117
Micro (95 h x 24 d) 5080 IS118
Micro (96 h x 24 d) 5080 IS118
Single (83 h x 24 d) 5000 IS114
Single (84 h x 24 d) 5000 IS114
Single (89 h x 24 d) 5010 IS114
Single (90 h x 24 d) 5010 IS114
Single (95 h x 24 d) 5020 IS115
Single (96 h x 24 d) 5020 IS115
TALL CABINET ACCESSORIES:
Accent Strips 4870 IS112
Angled End Panel 4865 IS112
Adjustable Shelves 4800 IS109
Fillers 4860 IS111
Fillers With Half Spool & Rod Post (3 ) 4863 IS111
Gourmet Pantry 4900 IS113
Pantry Spice Rack 4830 IS110
Radius Ends 4880 IS112
Rollout Shelves 4810 IS109
Swing Out Rack 4840 IS110
Tandem Swiveling Pull Out 4910 IS113
Tray Divider 4853 IS111
Vertical Divider 4850 IS110
Wire Pull Out Pantry 4890 IS113
iv March 1, 2007
IDC INDEXProduct Catalog# Page#
TALL CABINET MODIFICATIONS:
Angled Front and/or Sides 4620 IS106
Door Modifications 4585 IS105
Clipped Corner 4625 IS106
Cutdown Cabinet 4550 IS104
Decorative Door Applied Tall 4575 IS105
Extend Tall Side Back 4650 IS107
Finished Interior 4600 IS106
Flush Finished Back 4660 IS107
Flush Toe 4580 IS105
Oversize Cabinet 4540 IS104
Pipe Chase 4530 IS104
Real Wood Edgebanding 4680 IS108
Refrigerator End Panels, 3/4 wide 4640 IS107
Shelf Modifications 4670 IS108
TAMBOUR 7330 IS155
TELEVISION SWIVEL (PULL OUT) 7340 IS155
TOE, FLUSH (STANDARD) 2440 IS59
TOE, MODIFICATION 2575 IS64
TOEBOARD 7280 IS152
TOP COAT SPRAY 7320 IS155
TOUCH-UP KIT 7320 IS155
TRASH COMPACTOR PANEL 7140 IS144
VALANCES:
Arched 7005 IS133
Barrington 7015 IS135
High Gloss Foil 7007 IS134
Lace 7010 IS135
Laminate 7006 IS134
Standard Wood 7000 IS133
Veneer/Norlam 7006 IS134
VANITY CABINETS:
Comb. Bowl - Drawer Stack 6100 IS124
Comb. Bowl - Drawer Stack Backsaver 6120 IS124
Desk Drawer 6280 IS130
Double Bowl - Drawer Stack 6130 IS125
Double Bowl - Drawer Stack Backsaver 6135 IS125
File Cabinet (four drawer) 6275 IS130
File Drawer 6270 IS129
Four Drawer Backsaver 6040 IS121
Full Height Base 6015 IS120
Full Height Base Backsaver 6017 IS120
Mirrored Medicine Cabinet 6200 IS127
Pencil Drawer 6320 IS131
Pencil Drawer with Adapter Brackets 6330 IS131
Sink Base 6060 IS122
Sink Base Backsaver 6070 IS122
Product Catalog# Page#
VANITY CABINETS (CONTINUED):
Sink Drawer 6080 IS123
Sink Drawer Backsaver 6090 IS123
Sink Front 6050 IS121
Standard Base 6000 IS119
Standard Base Backsaver 6010 IS119
Tall Drawer 6160 IS126
Tall Drawer Backsaver 6170 IS126
Tall Utility 6140 IS125
Tall Utility Backsaver 6150 IS126
Tri-View Mirror 6180 IS127
Three Drawer 6020 IS120
Three Drawer Backsaver 6030 IS121
Wall Cabinet, 8 Deep 6230 IS128
Wall Toilet Cabinet, 8 Deep 6240 IS128
VANITY ACCESSORIES (ALSO USE BASE ACCESSORIES):
Accent Strips 6350 IS132
Clothes Chute Door and Frame 6260 IS129
Fillers 6340 IS131
Fillers With Half Spool & Rod Post (3 ) 6345 IS132
Mirror Frame 6290 IS130
Tapered Leg 6220 IS128
Wall Mount Bracket 6210 IS127
Wire Hamper 6250 IS129
VANITY MODIFICATIONS (USE BASE MODIFICATIONS)
VENDORS 7550 IS165
VINTAGE ARTISTRY 7311 IS154
WAINSCOT PANELS 7160 IS144
WALL CABINETS:
12 High 1000 IS3
14 High, 24 Deep 1020 IS3
15 High 1010 IS3
15 High, 24 Deep 1020 IS3
18 High 1030 IS4
18 High, 24 Deep 1035 IS4
20 High, 24 Deep 1035 IS4
21 High 1040 IS4
21 High, 24 Deep 1035 IS4
24 High 1040 IS4
24 High, 24 Deep 1045 IS5
26 High, 24 Deep 1045 IS5
27 High 1050 IS5
27 High, 24 Deep 1045 IS5
30 High 1050 IS5
32 High 1060 IS6
33 High 1060 IS6
36 High 1060 IS6
vMarch 1, 2007
IDC INDEXProduct Catalog# Page#
WALL CABINETS (CONTINUED):
39 High 1070 IS6
42 High 1070 IS6
Angle Corner Shelf 1240 IS16
Angled End 1120 IS9
Angled Wall 1125 IS9
Arched Top 1110 IS8
Blind Corner 1090 IS8
Bookcase 1250 IS16
Diagonal Corner 1140 IS10
Diagonal Corner, 27 Wide, 15 Deep 1142 IS11
Diagonal Corner with Garage 1145 IS11
Inside Radius (no door) 1210 IS15
Inside Radius (with door) 1200 IS15
Lift-Up Door 1077 IS7
Microwave Type A 1160 IS13
Microwave Type B 1170 IS14
Microwave Type C 1180 IS14
Outside Radius (no door) 1230 IS16
Outside Radius (with door) 1220 IS15
Standard Wall with Pigeon Hole Shelf 1159 IS13
Standard Wall with Open Shelf 1158 IS12
Standard Wall with Straight Garage 1156 IS12
Square Corner 1130 IS10
Tandem Swiveling Pull Out 1075 IS7
WALL CABINET ACCESSORIES:
Accent Strips 1810 IS32
Clipo Sliding Door Harware 1713 IS28
Corner Mid Shelf 1780 IS30
Fillers 1800 IS31
Fillers (Pull Out) 1807 IS32
Fillers With Half Spool & Rod Post (3 ) 1805 IS32
Mid Shelf 1770 IS30
Pantry Spice Rack Wall 1710 IS27
Plate Rack Insert 1790 IS31
Radius End 1820 IS33
Shutters (Aluminum Roller) 1712 IS28
Super Susan 1760 IS30
Tandem Swiveling Pull Out 1705 IS27
Tray Divider 1850 IS33
Vertical Divider 1840 IS33
What Not Shelf 1750 IS29
Wine Bottle Insert 1740 IS29
Wine Glass Holder 1720 IS28
Wine Rack Shelf 1730 IS29
Product Catalog# Page#
WALL CABINET MODIFICATIONS
Add Blind 1550 IS24
Add Toe Space 1560 IS24
Angled Front and/or Sides 1570 IS25
Back Modification 1610 IS26
Clipped Corner 1575 IS25
Cutdown Cabinet 1450 IS20
Decorative Door Applied Wall 1505 IS22
Diagonal Garage 1460 IS20
Door End Of 1490 IS21
Door Modifications 1420 IS19
Drawer Garage 1480 IS21
Extended Side Up, Down or Back 1350 IS17
Finished Back 1610 IS26
Finished Interior 1300 IS17
Flush Finished Top or Bottom 1390 IS18
Matching Bottom 1395 IS18
One Piece Units 1600 IS25
Open Shelf 1510 IS22
Open Shelf Tilt Down 1512 IS22
Oversize Cabinet 1440 IS20
Peninsula 1310 IS17
Pigeon Hole 1530 IS23
Pigeon Hole Tilt Down 1535 IS24
Pipe Chase 1430 IS19
Plate Rack Unit 1515 IS23
Real Wood Edgebanding 1650 IS26
Recessed Bottom 1410 IS19
Shelf Modifications 1640 IS26
Spice Drawer Shelf 1520 IS23
Straight Garage 1470 IS21
Valance Attached 1370 IS18
WOOD SPECIE UPCHARGE 7300 IS153
WOOD SPINDLES 7390 IS156
vi March 1, 2007
IDC MELAMINE CABINET DETAILSCASEWORKCabinets are constructed using premium industrial 45 lb.particle board, wood dowels, and glue. Low pressurelaminate (melamine) is applied to both interior andexterior of cabinet members using heat, pressure, and athermal setting adhesive. Laminate is available in white ornatural maple woodgrain. It is suitable for both verticaland horizontal applications and is resistant to mosthousehold hazards, fruit juices, alcohol, solvents, etc.
Wall cabinet tops, bottoms, and sides are 3/4 thick. Thetops and bottoms sit between and are doweled to thesides using 8mm diameter dowel pins. All visible edgeson the wall cabinet top and bottom are edgebanded tomatch the exterior top and bottom. All front edges areedgebanded to match the doors. The longer spans of wallbottoms may bow and need to be taken into considerationwhen designing the layout.
Base cabinets have 3/4 thick sides and bottoms, with 3/4thick cross-ties in front and back on the top of the cabinet.All front edges are edgebanded to match the doors.
The backs of both wall and base cabinets are 1/4 thickpremium industrial 45 lb. particle board laminated bothsides with the same material as the cabinet components.The backs are glued into grooves in the cabinet sides,tops, and bottoms.
Finished ends, tops, bottoms, and interiors are availablewith either wood veneer or HPL.
Melamine tolerances are –.000 , +1/32 . Therefore, youmust use fillers when installing cabinets between twospecific points (e.g. between two walls). Cabinet widthscan grow due to these tolerances and finished ends whenlayed up with HPL or veneer.
SHELVESShelves are all 3/4 thick 45 lb. premium industrial boardwith low pressure laminate applied to both sides. Thefront edge is banded to match. Shelves are full depth,adjustable with metric gang drilling (32mm spacing), andare supported by metal shelf (spoon) clips. Longer spansof shelves may bow and need to be taken intoconsideration when designing the layout.
DOORSDoors are available in many different styles andconstructions. See the door styling section in the HolidayKitchens Technical Catalog for construction and stylesavailable.
DRAWERSStandard Drawer Box:Traditional 5/8 solid hardwood Dodd’s Dovetail drawerbox finished natural. Drawer guides are undermount, fullextension with a soft close system. These guides arerated for 75 lbs. dynamic and for 100 lbs. static at halfextended drawer.
DRAWERS (CONT’D)Optional Drawer Box:Blum TANDEMBOX drawer system. This consists of“double-walled” epoxy powder coated metal sides with5/8 thick industrial particle board backs & bottoms. Theyhave a full-extension concealed runner system with a 100lb. load capacity, and are self-closing with positive stops.Drawer fronts are adjustable vertically and horizontally.Stainless steel drawer sides are available at an upcharge.On Tandembox orders, certain items may requireMetabox.
TOE KICKBase and tall cabinets are supplied with tubular legs withadjustable base pads. This enables cabinets to beinstalled with ease and accuracy. Leg sockets are sent tobe mounted on the bottom side of base and tall cabinets.A continuous toe kick is sent in 8 lengths to be clipped inplace after cabinets are set. Apply adhesive to the ends ofthe toeboard for field attachment of edgebanding. Afterinstallation, toe kick is 4 1/2 tall, 2 back from cabinetfront edge.
IDC Estate: sides extend down, notched for toe board,no legs, no sockets standard.
TOE KICK OPTIONSides can be extended down to floor and notched for toeboard. For leg options, see catalog #2600.
HANGING SYSTEMMost wall cabinets are supplied with hanging bracketsmounted in the rear upper corners. Used in conjunctionwith a metal hanging rail which can be ordered forinstallation on the wall, they can be adjusted up and downas well as in and out from the inside of the cabinetallowing accurate and time saving installation. Thissystem enables cabinets to be hung regardless of wherestuds lie in the wall. Cabinet sides are routed out toreceive the metal hanging rail. Hanging brackets are notinstalled in base cabinets, tall cabinets, finished interiorcabinets and a few other miscellaneous units. Hangingbrackets can be specified for base cabinets, no charge;top drawer becomes shallow depth. Certainmiscellaneous units are not available with brackets.Hanging strips are also installed on the backs of cabinetsto be used if desired. You can specify no hangingbrackets if the J-track system will not be used.
JOINING SCREWSMost cabinets have pre-drilled holes for the joininghardware. Use telescopic screws, supplied in thehardware box, in front and back to fasten cabinetstogether. Any finished interior cabinet will not bepre-drilled.
March 1, 2007 IC1
IDC ELITE (PLYWOOD) CABINET DETAILSCASEWORKCabinets are constructed using 3/4 plywood, wooddowels, and glue. Cabinet interiors are sealed andtopcoated natural maple.
Wall cabinet tops, bottoms, and sides are 3/4 thick. Thetops and bottoms sit between and are doweled to thesides using 8mm diameter dowel pins. Wall cabinet andtall cabinet exterior sides and exterior tops are unfinished.Wall cabinet bottoms are the same specie and finishedthe same as the doors. All visible edges on the wallcabinet are PVC edgebanded as close as possible tomatch the doors. Real wood edgebanding is available atan upcharge. The longer spans of wall bottoms may bowand need to be taken into consideration when designingthe layout.
Base cabinets have 3/4 thick sides and bottoms, with 3/4thick cross-ties in front and back on the top of the cabinet.Base cabinet exteriors are unfinished. All front edges arePVC edgebanded as close as possible to match thedoors. Real wood edgebanding is available at anupcharge.
The backs of both wall and base cabinets are 1/4 thicknatural maple plywood. The backs are glued into groovesin the cabinet sides, tops, and bottoms.
Finished ends, tops, bottoms, and interiors are availablewith either wood veneer or HPL.
Plywood tolerances are +1/32 . Therefore, you must usefillers when installing cabinets between two specific points(e.g. between two walls). Cabinet widths can grow orshrink due to these tolerances and finished ends whenlayed up with HPL or veneer.
SHELVESShelves are all 3/4 thick natural maple plywood. The frontedge is PVC edgebanded to match. Shelves are fulldepth, adjustable with metric gang drilling (32mmspacing), and are supported by metal shelf (spoon) clips.Longer spans of shelves may bow and need to be takeninto consideration when designing the layout.
DOORSDoors are available in many different styles andconstructions. See the door styling section in the HolidayKitchens Technical Catalog for construction and stylesavailable.
DRAWERSStandard Drawer Box:Traditional 5/8 solid hardwood Dodd’s Dovetail drawerbox finished natural. Drawer guides are undermount, fullextension with a soft close system. These guides arerated for 75 lbs. dynamic and for 100 lbs. static at halfextended drawer.
DRAWERS (CONT’D)Optional Drawer Box:Blum TANDEMBOX drawer system. This consists of“double-walled” white epoxy powder coated metal sideswith 5/8 thick industrial particle board backs & bottoms.They have a full-extension concealed runner system witha 100 lb. load capacity, and are self-closing with positivestops. Drawer fronts are adjustable vertically andhorizontally. Stainless steel drawer sides are available atan upcharge. On Tandembox orders, certain items mayrequire Metabox.
TOE KICKBase and tall cabinets are supplied with tubular legs withadjustable base pads. This enables cabinets to beinstalled with ease and accuracy. Leg sockets are sent tobe mounted on the bottom side of base and tall cabinets.A continuous toe kick is sent in 8 lengths to be clipped inplace after cabinets are set. Apply adhesive to the ends ofthe toeboard for field attachment of edgebanding. Afterinstallation, toe kick is 4 1/2 tall, 2 back from cabinetfront edge.
TOE KICK OPTIONSides can be extended down to floor and notched for toeboard. For leg options, see catalog #2600.
HANGING SYSTEMMost wall cabinets are supplied with hanging bracketsmounted in the rear upper corners. Used in conjunctionwith a metal hanging rail which can be ordered forinstallation on the wall, they can be adjusted up and downas well as in and out from the inside of the cabinetallowing accurate and time saving installation. Thissystem enables cabinets to be hung regardless of wherestuds lie in the wall. Cabinet sides are routed out toreceive the metal hanging rail. Hanging brackets are notinstalled in base cabinets, tall cabinets, finished interiorcabinets and a few other miscellaneous units. Hangingbrackets can be specified for base cabinets, no charge;top drawer becomes shallow depth. Certainmiscellaneous units are not available with brackets.Hanging strips are also installed on the backs of cabinetsto be used if desired. You can specify no hangingbrackets if the J-track system will not be used.
JOINING SCREWSMost cabinets have pre-drilled holes for the joininghardware. Use telescopic screws, supplied in thehardware box, in front and back to fasten cabinetstogether. Any finished interior cabinet will not bepre-drilled.
March 1, 2007IC2
IDC CABINET DETAILSSTANDARD COLOR LAMINATE(MELAMINE ORDERS ONLY)Colors: White
Natural Maple Woodgrain
When ordering one of the two standard laminate colors,the exterior top and bottom edges will be banded inmatching PVC. Also on standard colors, the interior andexterior of the cabinet boxes will be the same color. Thefront edges will be banded to match the cabinet doors anddrawer fronts. If ordering other colors, textures, glosses,or brands of laminate, see section below on Special ColorLaminate (HPL).
WOODMelamine cabinets with wood doors will have the frontedges banded in woodgrain PVC or a matching solidcolor PVC unless a wood finished interior is added to thecabinet, in which case the front edges will be banded inreal wood and stained to match. Unless specified, whiteand natural maple melamine interiors, tops, bottoms, andend panels will be standard. The top and bottom edges ofthe melamine wall cabinet will be banded to match theexterior top and bottom box color. When finished interiorsare ordered, the exterior bottoms will match the interiors.This should be taken into consideration when designingthe kitchen layout.
Plywood IDC cabinets will always be banded withmatching PVC unless real wood banding is specified atan upcharge.
SPECIAL COLOR LAMINATE (HPL)All Wilsonart, Pionite, Formica, and Nevamar solid colorscan be provided on the doors and drawer fronts. Use theHPL column of the door style pricing section. If orderingpatterns, glosses, special textures, or other brands oflaminate, please contact customer service for specialpricing and availability.
Melamine cabinets will have the front edges banded inmatching PVC. Special color laminate cabinets will havewhite or natural maple woodgrain interiors, tops, bottoms,and end panels unless otherwise specified. These areasare available with the same HPL material, but they mustbe specified on the order and the upcharges, noted asHPL parts in the price sheets, will apply. The top andbottom edges of the wall cabinet will be banded to matchthe exterior top and bottom box color.
Plywood IDC cabinets will have the front edges banded inmatching PVC. Unless specified, interiors will be naturalmaple; end panels and tops will be unfinished. Theseareas can be specified with the same HPL material;appropriate upcharges will apply. Bottoms will be thesame HPL material and PVC banded to match.
SPECIAL COLOR LAMINATE (HPL)(CONTINUED)Not all special laminates have matching PVC bandingcolors. If in doubt, contact the factory for a sample of theedgebanding that will be on your cabinetry.
HOLIDAY KITCHENS RESERVES THE RIGHT TOREFUSE ANY ORDER AND TAKES NORESPONSIBILITY FOR SHORTAGES, DISCONTINUEDPRODUCT, OR DYE LOT DIFFERENCES OFLAMINATED PRODUCTS.
WIRE ACCESSORIESMelamine and plywood cabinets will receive chromeaccessories.
CABINET CARE - LAMINATEProper care and maintenance will give you years ofservice and pride of ownership. After installation, wipelaminate areas with a damp, soft cloth. It may benecessary to use a mild liquid detergent or a non-abrasivehousehold cleaner. Rinse with water and a clean,non-abrasive, damp cotton cloth when complete.
High gloss laminate should be cleaned using the sameprocedure as our standard laminates. Any smears orstreaks may be removed using a mild glass cleaner and aclean, non-abrasive, cotton cloth. If in doubt of a particularcleaning product or detergent, please check with itsmanufacturer. Use of abrasive cleaners, scouring pads,sand paper, steel wool, etc., can damage the laminates.Acid or alkaline cleaners will mar or permanently discolorlaminates.
Occasionally streaks or smudges may appear on newlaminate doors or end panels caused by contactadhesive. These may be removed using a clean,non-abrasive cotton cloth and an adhesive solvent suchas lacquer thinner. Read and follow all warnings andinstructions on the container label. Self cleaning waxescan be used to provide a protective coat on laminatesurfaces. They can be used frequently and are availableat your local supermarket.
IC3March 1, 2007
IDC CABINET DETAILSWALL CABINETS
CASEWORKCabinets are constructed using 3/4 thick material forthe tops, bottoms, and sides. The cabinet has PVCedgebanding applied on all front, top, and bottomedges. Wood dowels and glue are used for durableconstruction. Backs are 1/4 thick and are groovedand glued into cabinet sides, tops, and bottoms.
SHELVESShelves are adjustable, 3/4 thick, full depth, and PVCedgebanded front. If finished interior is ordered,shelves will be veneered or laminated and banded tomatch.
HANGING SYSTEMMost walls are equipped with hanging brackets to beused with a J-channel wall track. The track will becalculated for quantity required and charged to theorder. The brackets are located in the upper rearcorners of the cabinet and allow for vertical andhorizontal adjustment of the cabinet. The cabinetsides are pre-routed to receive the J-track. Every wallcabinet is also equipped with two hanging strips, incase the J-track hanging system will not be used.
12
BASE CABINETSCASEWORKBase cabinets are constructed of the samematerial as wall cabinets except cross-ties areused in place of a solid top.
SHELVESShelves are adjustable, 3/4 thick, full depth, andPVC edgebanded front.
HANGING SYSTEMEvery base cabinet is equipped with one hangingstrip. The same J-track hanging system used onwalls is available, no charge; top drawer becomesa shallower depth.
TOE KICK SYSTEMBase cabinets are supplied with leg sockets andtubular legs with adjustable PVC base pads. Alllegs are adjustable between 3 7/8 and 6 3/4 . Withtoe kick supplied, 2 from front of toe kick to frontof cabinet. Each base cabinet will receive 4 legs,>36 wide cabinets: 6 legs, tall cabinets: 4 legs,and square & diagonal corner cabinets: 5 legs. Afull length, clip-on toe kick is also supplied.
TOE KICK OPTIONSides can be extended down to floor and notchedfor toe board. For leg options, see catalog #2600.
IDC Estate: sides extend down, notched for toeboard, no legs, no sockets standard.
TALL CABINETSTall cabinets are a combination of wall and basecabinet construction.
24
30
34 1/2
2 3/4
Toe KickOption
IC4 March 1, 2007
IDC CABINET DETAILS
BLIND CORNER BASE
1. Allows for 6 pull (does not need to be pulled).2. Specify blind [L] or [R].3. Shelves are full depth and notched around hinge stile.4. 3 or 6 accent strip sent loose, please specify.5. 27 blind standard. Door and drawer openings vary.6. Adjacent cabinet must have 3 filler.
27
3 filler
3 accentstrip shown
BLIND CORNER WALL
1. Allows for 6 pull (does not need to be pulled).2. Specify blind [L] or [R].3. Shelves are full depth and notched around hinge stile.4. 3 or 6 accent strip sent loose, please specify.5. 15 blind standard. Door openings vary.6. Adjacent cabinet must have 3 filler.
15
3 filler
3 accentstrip shown
PENINSULA CORNER BASE
1. Used to obtain corner access from dining room side.2. PCB gets one loose 4 accent strip & a flush finished back.
27
IC5March 1, 2007
IDC CABINET DETAILSBASE AND BACKSAVER VANITY VANITY BASE
6
24
4 1/2
34 1/2
4 1/2
6
2131 1/2
THREE DRAWER BASEAND THREE DRAWERBACKSAVER VANITY
THREE DRAWERVANITY BASE
BDT
6
12
4 1/2
12
34 1/2
VBD
4 1/2
13 1/2
6
31 1/2
7 1/2
FOUR DRAWER BASEAND FOUR DRAWERBACKSAVER VANITY
BROOM CABINETS
BD
6
6
6
12
4 1/2
34 1/2
Standard Configuration
192531
60 1/2
4 1/2
849096
IC6 March 1, 2007
IDC CABINET DETAILSBROOM CABINET REVERSE
AND TALL VANITYTALL UTILITY CABINETS
VANITY TALL UTILITY
30
4 1/2
Standard Configuration
49 1/255 1/261 1/2
849096
52 1/2
27
4 1/2
84
Standard Configuration
BROOM CABINET DRAWERSAND TALL VANITY
TALL DRAWER CABINETSVANITY TALL DRAWER
6
6
6
12
4 1/2
Standard Configuration
849096
49 1/255 1/261 1/2
52 1/2
13 1/2
7 1/2
6
4 1/2
84
Standard Configuration
STANDARD LAMINATE (MELAMINE)/HPL CROSS REFERENCEHPL TO MATCH
STANDARD LAMINATE Wilsonart Pionite Formica
White Frosty White #1573-6 White #SW811 White#949
Maple Woodgrain Maple #WM851-F28
STANDARD SHELVINGWall Cabinets & Bookcases
0 - 18 0 shelves. . . . . . .
>18 - 24 1 shelf. . . . . . .
>24 - <36 2 shelves. . . . . . .
36 - 52 3 shelves. . . . . . .
>52 4 shelves. . . . . . .
Base Cabinets
Regular Base 1 shelf. . . . . . . . . . . . . . .
Base Full Height 2 shelves. . . . . . . . . . . . .
Sink Base 0 shelves. . . . . . . . . . . . . . . . . .
Tall Cabinets
Smaller opening -- See cabinet block fornumber of shelves. Shelf package must bepurchased for larger opening.
Vanities
Base 1 shelf. . . . . . . . . . . . . . . . . . . . .
Base Full Height 2 shelves. . . . . . . . . . .
Sink Base 0 shelves. . . . . . . . . . . . . . . .
Tall Utility See cabinet. . . . . . . . . . . . . . . . .block fornumber ofshelves.
IC7March 1, 2007
QualityDesigned forQualityLiving
HOLIDAY KITCHENS120 West Allen StreetRice Lake, WI 54868
Voice: (715) 736-9200 FAX: 1-800-497-4314
www.holidaykitchens.com
email to: [email protected]
INTERNATIONALDESIGN COLLECTION
Door Style ChargesEffective March 1, 2007
1. Door and drawer front style charges are separated into six different price categories; thecross reference chart provided lists all door styles in alphabetical order.
2. Numbers reflect the charge per door of the appropriate style; doors over 42 tall have twodoor style charges.
3. Blank Areas: door is not available with those specifications.
4. Arch/Square: specify arch or square doors.
5. Wooddoors canbeorderedwith different edge profiles at no charge, check appropriate doorstyle page for edges available.
6. Certain HPL is subject to a minimum upcharge on HPL items only. Call for a quote on glossor pattern HPL.
7. For door modifications, see Wall Cabinets #1420, Base Cabinets #2530,or Tall Cabinets #4585.
8. HPL doors requiring banding can be banded with HPL, add 50% to door and drawer frontstyle charge.
9. For commercial upgrades to doors/drawer fronts, see catalog #7430.
March 1, 2007 IDP1
DOOR STYLE CHARGESPRICE GROUP I
DOOR STYLE CHARGES DRAWER FRONT CHARGES
RoutedFrench Mullion
3 Stile & Rail OptionSlab
Door Style StandardRoutedfor Glass Wood Foil/MDF
3 Stile & Rail Option(Square Doors Only) a Wood Foil/MDF
LIST PRICE $19 $31 $137 N/A No additional upcharge N/C $31
ContemporaryGeneva (Mel/HPL)JamestownMission a
Phoenix a
PRICE GROUP IIDOOR STYLE CHARGES DRAWER FRONT CHARGES
RoutedFrench Mullion
3 Stile & Rail OptionSlab
Door Style StandardRoutedfor Glass Wood Foil
3 Stile & Rail Option(Square Doors Only) Wood Foil Paneled
LIST PRICE $61 $31 $137 $265 No additional upcharge N/C $31 $54
Birmingham Arch/Square a
Cedarcreek a
Harrisburg Arch/Square a
Italia See Shaker See ShakerKingston Arch/Square a
Lancaster Arch/Square a
Lexington Arch/Square a
Lexus Arch/Square See ShakerPetersburg Arch/Square a
Portland Supreme a
Prism See Shaker See ShakerRegency a
Seattle a b
Summit Arch/Square a
Wiltshire Arch/Square a
Winchester Arch/Square a
PRICE GROUP IIIDOOR STYLE CHARGES DRAWER FRONT CHARGES
RoutedFrench Mullion
3 Stile & Rail OptionSlab
Paneled/Door Style Standard
Routedfor Glass Wood Foil
3 Stile & Rail Option(Square Doors Only) Wood Foil
Paneled/MDF Slab
LIST PRICE $86 $31 $137 $265 No additional upcharge N/C $31 $54
Alero Arch/Square See ShakerEdgewaterEngelbrookHarrisburg IILancaster Double ArchLancaster Square DuetLexington Double ArchLexington Square DuetMunich See FriscoPortland Supreme DuetRiversideSeattle Duet b
Seattle Groove a
SpringdaleTahoeUltima Arch/Square See ShakerWinchester Double ArchWinchester Square Duet
a 3 stile and rail option will be offered at the standard 2 1/4 stile and rail price. No additional upcharge.b Napa drawer front available top drawer only.
IDP2 March 1, 2007
These door groupings and categories do not represent all of the possible combinations.For specifications, please refer to the Technical Guide Door Styling Section.
DOOR STYLE CHARGESPRICE GROUP IV
DOOR STYLE CHARGES DRAWER FRONT CHARGESRoutedfor Glass
FrenchMullion 3 Stile & Rail Slab Paneled/ Paneled
Door Style Stand. Wood/FoilGloss/Foil Wood Foil/MDF
3 Stile & RailOption (SquareDoors Only) Wood Foil
w/ Mldg(Wood)
Paneled/MDFSlab
Paneledw/Mldg(Wood)
LIST PRICE $112 $82 $228 $189 $265No add.upcharge N/C $31 $54 $54 $105
BastilleBristol See Shaker See ShakerCascade Arch/SquareCountry French Arch/Sq a
Embassy b a
Essex a
FriscoGeorgian b a
Lakeshore b a
Lancaster Sq w/Newcastle Mldg a
Lincoln a
Newcastle a c
Seattle Groove Duet a
ShakerShaker Duet See ShakerShaker Groove See ShakerSummit Square w/ 3/8 Rope Mldg a c
Tuscany
PRICE GROUP VDOOR STYLE CHARGES DRAWER FRONT CHARGES
Routedfor Glass French Mullion 3 Stile & Rail Slab Paneled
Door Style Stand. WoodFoil/MDF Wood
Foil/MDF
3 Stile & RailOption (SquareDoors Only) Wood Foil
w/ Molding(Wood) MDF Paneled Paneled
Paneledw/Molding(Wood)
LIST PRICE $150 $82 $228 $189 $322No add.upcharge N/C $39 $54 $86 $54 $105 $150
Aspen Arch/SqMarquis c
PillowPioneer c
Prairie c
Presidential c
Saxony c
SPECIALTY DOORSDOOR STYLE CHARGES DRAWER FRONT CHARGES
French Mullion 3 Stile & Rail Slab Paneled
Door Style StandardRoutedfor Glass Wood
Foil/MDF
3 Stile & RailOption (SquareDoors Only) Wood Foil
w/ Molding(Wood)
Paneled/MDF Slab
Paneledw/Molding(Wood)
LIST PRICESeeBelow
SeeBelow
SeeBelow
SeeBelow
No add.upcharge N/C
SeeBelow
SeeBelow
SeeBelow
SeeBelow
Cabana $ 277 $ 31 $ 137 standardPanama $ 477 $ 31 $ 137 standardPanama w/ Essex Molding $ 528 $ 82 $ 189 standard $ 54Panama w/ Embassy Mldg $ 528 standardVeranda $ 277 $ 31 $ 137 standarda 3 stile and rail option will be offered at the standard
2 1/4 stile and rail price. No additional upcharge.b Georgian and Embassy French doors will not have molding applied.c Flat panel drawer fronts available only.
Some paneled drawer fronts cannot have raised center panels,but can be made with a flat panel.(For example, Newcastle with a flat panel is the same as Lincoln.)
SPECIALTY DRAWERSDrawer Style StandardHastings $ 105 ListNapa $ 54 List
IDP3March 1, 2007
DOOR STYLE CHARGESALPHABETICAL CROSS REFERENCE BY DOOR STYLE NAME
Door Style Price Group Door TypeAlero Arch/Square III Foil Paneled
Aspen Arch/Square V Foil Paneled
Bastille IV French
Birmingham Arch/Square II Flat Panel
Bristol IV Foil Paneled
Cabana Specialty Bamboo Insert Panel
Cascade Arch/Square IV Foil Paneled
Cedarcreek II Mitered Raised Panel
Contemporary I Slab
Country French Arch/Square IV French
Edgewater III Mitered Flat Panel
Embassy IV Flat Panel with Molding
Engelbrook III Mitered Raised Panel
Essex IV Flat Panel with Molding
Frisco IV Slab
Geneva Mel/HPL I Slab
Georgian IV Raised Panel with Molding
Harrisburg Arch/Square II Raised Panel
Harrisburg II III Raised Panel
Italia II Foil Slab
Jamestown I Slab
Kingston Arch/Square II Flat Panel
Lakeshore IV Mitered Raised Panel with Molding
Lancaster Arch/Square II Raised Panel
Lancaster Double Arch III Raised Panel
Lancaster Square Duet III Raised Panel
Lancaster Square with Newcastle Molding IV Raised Panel with Molding
Lexington Arch/Square II Raised Panel
Lexington Double Arch III Raised Panel
Lexington Square Duet III Raised Panel
Lexus Arch/Square II Foil Paneled
Lincoln IV Flat Panel with Molding
Marquis V Mitered Raised Panel with Rope Inlay
Mission I Flat Panel
Munich III Slab
Newcastle IV Raised Panel with Molding
Panama Specialty Lattice Insert Panel
Panama with Embassy Molding Specialty Lattice Insert Panel with Molding
Panama with Essex Molding Specialty Lattice Insert Panel with Molding
Petersburg Arch/Square II Flat Panel
Phoenix I Flat Panel
Pillow V Veneer Wrapped
Pioneer V Flat Panel
Portland Supreme II Raised Panel
Portland Supreme Duet III Raised Panel
Prairie V Flat Panel
Presidential V Mitered Raised Panel
Prism II Foil Slab
Regency II Raised Panel
Riverside III Mitered Raised Panel
Saxony V Mitered Raised Panel with Rope Inlay
Seattle II Flat Panel
Seattle Duet III Flat Panel
IDP4 March 1, 2007
DOOR STYLE CHARGESALPHABETICAL CROSS REFERENCE BY DOOR STYLE NAME (CONTINUED)
Door Style Price Group Door TypeSeattle Groove III Flat Panel
Seattle Groove Duet IV Flat Panel
Shaker IV Foil Paneled
Shaker Duet IV Foil Paneled
Shaker Groove IV Foil Paneled
Springdale III Mitered Raised Panel
Summit Arch/Square II Raised Panel
Summit Square with 3/8 Rope Molding IV Raised Panel with Molding
Tahoe III Foil Slab
Tuscany IV Raised Panel
Ultima Arch/Square III Foil Paneled
Veranda Specialty Wicker/Rattan Insert Panel
Wiltshire Arch/Square II Flat Panel
Winchester Arch/Square II Raised Panel
Winchester Double Arch III Raised Panel
Winchester Square Duet III Raised Panel
SPECIAL ORDER DOORSStainless Steel Fax factory for quote. . . . . . . . . . . . . . . . . . . . .Aluminum Frame with Glass Fax factory for quote. . . . . . . . .
RADIUS DOORSAdd to cabinet box price.Radius routed Harrisburg arched and square doors are the same price as a radius panel door.Radius french Harrisburg arched and square doors are the same price as a radius panel door plus $132 per lite.
DOOR STYLE HEIGHT 12 CONCAVE 12 CONVEX 24 CONVEX (2 DOORS)
Geneva* standard $ 623 $ 623 N/A
Munich* standard 623 623 N/A
up to 32 2075 2075 $ 3247
up to 38 2477 2477 3861
Harrisburg Archedup to 44 2880 2880 4478
Harrisburg Archedup to 50 3282 3282 5093
up to 56 3684 3684 5707
up to 62 4086 4086 6323
up to 32 1640 1640 2597
up to 38 1950 1950 3075
Harrisburg Squareup to 44 2262 2262 3556
Harrisburg Squareup to 50 2571 2571 4033
up to 56 2885 2885 4511
up to 62 3197 3197 4989
* Geneva and Munich radius doors will not be guaranteed over 41 13/16 finished height.
Edges available: #300#600#850
Exotic Veneer Doors: see Technical Guide Door Styling Section for details and availability of veneers(Frisco and Munich door styles).
IDP5March 1, 2007
QualityDesigned forQualityLiving
HOLIDAY KITCHENS120 West Allen StreetRice Lake, WI 54868
Voice: (715) 736-9200 FAX: 1-800-497-4314
www.holidaykitchens.com
email to: [email protected]
INTERNATIONALDESIGN COLLECTION
Specification CatalogEffective March 1, 2007
1. All prices are F.O.B. Rice Lake, WI. This price list supercedes all previous lists.
2. Prices and specifications are subject to change without notice.
3. If you require a quote on a special unit, send detailed information to the factory.
4. Order changes: A minimum $52.00 net charge for order changes.
5. Requested information that is not supplied will delay processing of your order.
6. Hinge direction of single door cabinets must be specified.
7. Cancellations must be received in writing. Process fees will be added for all cancellations.
8. Shop charges of $102.00 list per 1/2 hour will be assigned to special units.
9. Hardware is not available.
March 1, 2007 IS1
WALL CABINETS
1000 1000
12 High Walls 12 High Walls
12Doors Mel Ply
12 W2412 2 $ 382 $ 543
W2712 2 385 547
W3012 2 394 557
W3212 2 412 585
W3312 2 420 597
W3412 2 428 608
W3612 2 445 632
12 W3912 2 470 66712Finished End veneer 57 57
S No shelf Finished End HPL 32 32
S Cabinets over 36 wide have verticaldivider installed (price is included)
For additional widths use 30 price,e.g. for W1512 use W1530 price.
1010 1010
15 High Walls 15 High Walls
12Doors Mel Ply
12W2415 2 $ 394 $ 557
W2715 2 397 560
W3015 2 407 577
W3215 2 424 601
W3315 2 435 616
W3415 2 442 626
W3615 2 460 652
15W3915 2 484 687
15Finished End veneer 57 57
S No shelf Finished End HPL 32 32
S Cabinets over 36 wide have verticaldivider installed (price is included)
For additional widths use 30 price,e.g. for W1515 use W1530 price.
1020 1020
15 High, 24 Deep Refrigerator Walls 15 High, 24 Deep Refrigerator Walls
Doors Mel Ply
24 W301524 2 $ 557 $ 789
W321524 2 581 826
W331524 2 606 859
W341524 2 610 865
W361524 2 642 909
W391524 2 658 933
W421524 2 699 99215 Finished End veneer 57 57
Finished End HPL 32 32
S No shelf
S Cabinets over 36 wide have verticaldivider installed (price is included)
14 high, 24 deep cabinet available at 15price. Specify cut to 14 high.
IS3March 1, 2007
WALL CABINETS1030 1030
18 High Walls 18 High Walls
12Doors Mel Ply
12W2418 2 $ 397 $ 560
W2718 2 407 577
W3018 2 428 608
W3218 2 442 626
W3318 2 452 642
W3418 2 460 652
W3618 2 470 667
18W3918 2 505 717
18Finished End veneer 57 57
S No shelf Finished End HPL 32 32
S Cabinets over 36 wide have verticaldivider installed (price is included)
For additional widths use 30 price,e.g. for W1518 use W1530 price.
1035 1035
21 High, 24 Deep Refrigerator Walls 21 High, 24 Deep Refrigerator Walls
Doors Mel Ply
24 W302124 2 $ 609 $ 86324
W322124 2 637 902
W332124 2 664 939
W342124 2 668 948
W362124 2 702 996
21 W392124 2 720 1022
W422124 2 761 1077
S One adjustable shelf Finished End veneer 86 86S One adjustable shelf
S Cabinets over 36 wide have vertical Finished End HPL 45 45S Cabinets over 36 wide have verticaldivider installed (price is included) andsplit shelves
18 and 20 high, 24 deep cabinet available at21 price. Specify cut to 18 or 20 high.
1040 1040
24 High Walls 24 High Walls
12Doors Mel Ply
12W2424 2 $ 403 $ 572
W2724 2 420 597
W3024 2 452 642
W3324 2 467 661
W3624 2 486 690
W3924 2 523 742
Finished End veneer 57 57
Finished End HPL 32 32
S One adjustable shelf
S Cabinets over 36 wide have verticaldivider installed (price is included) andsplit shelves
24 For additional widths use 30 price,e.g. for W1524 use W1530 price.
21 high cabinets available at 24 price.Specify cut to 21 high.
IS4 March 1, 2007
WALL CABINETS1045 1045
27 High, 24 Deep Refrigerator Walls 27 High, 24 Deep Refrigerator Walls
Doors Mel Ply
24 W302724 2 $ 668 $ 948
W322724 2 697 989
W332724 2 725 1027
W342724 2 732 1038
W362724 2 768 1091
27 W392724 2 789 1120
W422724 2 830 1176
S Two adjustable shelves Finished End veneer 86 86S Two adjustable shelves
S Cabinets over 36 wide have vertical Finished End HPL 45 45S Cabinets over 36 wide have verticaldivider installed (price is included) andsplit shelves
24 and 26 high, 24 deep cabinets availableat 27 price. Specify cut to 24 or 26 high.
1050 1050
30 High Walls 30 High Walls
12Doors Mel Ply
12 W930 1 $ 223 $ 316
W1230 1 249 351
W1430 1 282 400
W1530 1 283 401
W1630 1 300 425
30W1830 1 315 445
30W2030 1 333 472
W2130 1 343 486
W2230 1 353 502
12W2430 2 410 580
12W2630 2 420 597
W2730 2 429 610
W2830 2 449 637
W3030 2 467 661
W3230 2 492 698
W3330 2 496 705
W3430 2 504 714
30 W3630 2 518 73530
W3930 2 545 772
W4230 2 605 856
S Two adjustable shelves Finished End veneer 63 63j
S Cabinets over 36 wide have vertical Finished End HPL 32 32Cabinets over 36 wide have verticaldivider installed (price is included) andsplit shelves
27 high cabinets available at 30 price.Specify cut to 27 high.
IS5March 1, 2007
WALL CABINETS1060 1060
36 High Walls 36 High Walls
12 Doors Mel Ply12W936 1 $ 250 $ 353W1236 1 293 415W1436 1 318 449W1536 1 323 460W1636 1 333 472W1836 1 356 506
36W2036 1 358 511
36W2136 1 379 537W2236 1 425 603
12 W2436 2 435 61612W2636 2 477 676W2736 2 486 690W2836 2 505 717W3036 2 531 754W3236 2 552 783W3336 2 577 817W3436 2 609 863W3636 2 610 865
S 36 high cabinets have three36W3936 2 623 883
S 36 high cabinets have threeadjustable shelves; 32 & 33 high
36W4236 2 672 953
adjustable shelves; 32 & 33 highhave two adjustable shelves Finished End veneer 74 74have two adjustable shelves
S Cabinets over 36 wide have verticalFinished End HPL 39 39
S Cabinets over 36 wide have verticaldivider installed (price is included) andsplit shelves
32 and 33 high cabinets available at 36price. Specify cut to 32 or 33 high.
1070 1070
42 High Walls 42 High Walls
12 Doors Mel Ply
W942 1 $ 264 $ 374W1242 1 304 433W1442 1 332 470W1542 1 347 491W1642 1 361 512W1842 1 385 547
42W2042 1 411 581
42W2142 1 422 600
12W2242 1 440 622
12 W2442 2 473 672W2642 2 504 714W2742 2 518 735W2842 2 533 756W3042 2 560 795W3242 2 586 831W3342 2 597 847W3442 2 604 854W3642 2 611 866
42W3942 2 638 905
42W4242 2 696 986
S Three adjustable shelves Finished End veneer 85 85S Three adjustable shelves
S Cabinets over 36 wide have verticalFinished End HPL 44 44
S Cabinets over 36 wide have verticaldivider installed (price is included) andsplit shelves
39 high cabinets available at 42 price.Specify cut to 39 high.
IS6 March 1, 2007
WALL CABINETS1075 1075
Wall With Tandem Swiveling Pull Out Wall With Tandem Swiveling Pull Out
12Doors Mel Ply
12W1230WS 1 $ 1320 $ 1423
W2430WS 2 2465 2637
Finished End veneer 63 63
Finished End HPL 32 32
W1236WS 1 1365 1487
W2436WS 2 2491 26713036
Finished End veneer 74 7436
Finished End HPL 39 39
S 12 deep walls
S Two-door cabinet receives twopull outs
S Opening the cabinet door makes thepull out shelves slide forward
S Chrome pull out and door rack, eachwith three fixed shelves
S Hafele item
12
3036
1077 1077
Wall With Lift-Up Door Wall With Lift-Up Door
12Single Door Mel Ply
12W2118LUS $ 971 $ 1114
W3018LUS 1070 1250
Finished End veneer 57 573
9/5 Finished End HPL 32 32
3/8
9/16Two Doors Stacked
3036
3/8
2 1/2W2130LUS 1656 1822
3612
8 1/ f
2 1/2W3030LUS 1808 2026
8 1/4 for9/16 overlay Finished End veneer 63 639/16 overlay
Finished End HPL 32 32
W2136LUS 1692 1872
2 1/2 W3036LUS 1872 21192 /2
1 1/4 Finished End veneer 74 741 /4min.8 11/
Finished End HPL 39 39
S 12 deep wallsS Cabinets with two doors stacked have afixed shelf included in the price and bothdoors have the lift-up mechanism
S The lift-up mechanism swings the doorsoftly upwards, brings it to a smooth stop,and is securely held open
S Hafele itemS White only
18
8 11/16
IS7March 1, 2007
WALL CABINETS1090 1090
Blind Corner Walls Blind Corner Walls
Doors Mel Ply
WBC2430 1 $ 387 $ 549
WBC2730 1 425 603
WBC3030 1 446 634
WBC3330 1 482 681
WBC3630 1 518 735
WBC3930 2 556 787
WBC4230 2 590 837
Finished End veneer 63 63
Finished End HPL 32 32
Accent Strip 10mm gap WBC2436 1 432 611
12 15
Accent Strip 0 gap
WBC2736 1 482 68112 15WBC3036 1 517 734
WBC3336 1 558 792
S See IDC cabinet details section for detailed WBC3636 1 606 840S See IDC cabinet details section for detailedinstallation print WBC3936 2 633 897p
S 18 high blind cabinets do not have a shelf WBC4236 2 676 9588 g b d cab ets do ot a e a s e
S Single door cabinets have door hinged blind side Finished End veneer 74 74Single door cabinets have door hinged blind sideunless specified Finished End HPL 39 39
S 39 and 42 wide have two doors3036
WBC2442 1 477 676
S 3 or 6 accent strip sent loose, please specify303642
WBC2742 1 517 7343 o 6 acce t st p se t oose, p ease spec y
S 6 accent strip allows for 3 pull42
WBC3042 1 556 7876 accent strip allows for 3 pull
S Does not need to be pulled WBC3342 1 590 837S Does not need to be pulled
S Specify blind left or right (right shown) WBC3642 1 634 898S Specify blind left or right (right shown)
S Blind closed off to within 10mm with 3/4 material WBC3942 2 678 961S Blind closed off to within 10mm with 3/4 material
S 15 blind standard WBC4242 2 720 1022S 15 blind standard
S Shelves are standard depth and notched aroundFinished End veneer 85 85
S Shelves are standard depth and notched aroundhinge stile Finished End HPL 44 44hinge stile
18 and 24 high cabinets available at 30price. Specify cut to 18 or 24 high.
Add for required accent strip, see catalog#1810.
1110 1110
Wall Arched Top Wall Arched Top
S 39 and 45 high cabinets have two adjustable12 Doors Mel PlyS 39 and 45 high cabinets have two adjustableshelves on surface mounted metal shelf standards
12WAT39 1 $ 1689 $ 1839shelves on surface mounted metal shelf standards
S 51 high cabinets have three adjustable shelves WAT45 1 1731 1889S 51 high cabinets have three adjustable shelveson surface mounted metal shelf standards9 WAT51 1 1760 1922on surface mounted metal shelf standards
S 9 radius arch, 18 wide cabinet onlyS 3/4 back, no J-trackS Specify veneer seam left or seam right; seam leftis standard and shown
S Wood french or routed door only, price includesdoor style charge39 high: 10 lites45 high: 12 lites51 high: 14 lites
S Door only available with edges:300, 350, 400, 525, 600, 650, and 750
S Not available over 51 highS Not available with HPLS Entire interior & exterior of unit finishedS If no door on cabinet, deduct $568 from price
9
18
394551
303642
Includes door.If no door on cabinet, deduct $568 from price.
IS8 March 1, 2007
WALL CABINETS1115 1115
Wall Double Angle Wall Double Angle
1
Doors Mel Ply
12 23 1/424
WDA2430 2 $ 948 $ 118224
Finished End veneer 63 63
Finished End HPL 32 32
WDA2436 2 974 1216
Finished End veneer 74 74
30Finished End HPL 39 39
3036 WDA2442 2 1012 1274
2 d fi d h l
3642 Finished End veneer 85 85
S 2 doors, fixed shelves
T l ff i i t bi tFinished End HPL 44 44
S To close off view into cabinet, oradjustable shelves, use 2 hinge stiles
For two hinge stiles and notched shelves,add $83.
1120 1120
Wall Angled End Wall Angled End
67 1/2_90_ Doors Mel Ply
11 11/16
67 /290WAE30 2 $ 529 $ 751
12
11 /16
135_Finished End veneer 63 6312
135_Finished End HPL 32 32
WAE36 2 577 817
Finished End veneer 74 74
Finished End HPL 39 39
S 30 high cabinets (shown) have two WAE42 2 586 831S 30 high cabinets (shown) have twofixed shelves Finished End veneer 85 85fixed shelves
S 36 and 42 high cabinets have three Finished End HPL 44 4436 and 42 high cabinets have threefixed shelves
S Raised panel doors are available
S Recommend adjacent cabinet havefinished end
S 3/4 backs, no J-track
1125 1125
Angled Wall Angled Wall
12 Doors Mel Ply12
11 1/4AW30 1 $ 435 $ 54411 1/4Finished End veneer 63 63
Finished End HPL 32 32
AW36 1 479 608
Finished End veneer 74 7412 Finished End HPL 39 39
S Fixed shelves in cabinet11 1/4 AW42 1 490 623
S Fixed shelves in cabinet
S Raised panel doors are availableFinished End veneer 85 85
S Raised panel doors are available
Recommend adjacent cabinet ha eFinished End HPL 44 44
S Recommend adjacent cabinet havefinished end
S 3/4 backs, no J-track
S Built with hinge stile, accent strip sentapplied
Add for required accent strip, see catalog#1810.
IS9March 1, 2007
WALL CABINETS1130 1130
Square Corner Walls Square Corner Walls
Doors Mel Ply
SCW242424 2 $ 710 $ 1006
Blum Bi-Foldhingedt
24 Finished End veneer 57 57gseparate
Finished End HPL 32 3212 SCW242430 2 710 1006
St d d ith th Bl Bi F ld hiFinished End veneer 63 63
S Standard with the Blum Bi-Fold hinge,specify hinged left or right; specify for Finished End HPL 32 32specify hinged left or right; specify fordoors hinged separately with the 170_hi
SCW242436 2 779 1102g p yhinge
S Molding applied doors must haveFinished End veneer 74 74
S Molding applied doors must haveBlum Bi-Fold hinging Finished End HPL 39 39Blum Bi-Fold hinging
S SCW242430 shown SCW242442 2 863 1224S SCW242430 shown
S Cabinets without doors will have one3
Finished End veneer 85 85Cabinets without doors will have one3/4 back, no J-track, and adjustableshelves
Finished End HPL 44 44shelves
1140 1140
Diagonal Wall Corner Diagonal Wall Corner
Doors Mel Ply
DWC2424 1 $ 558 $ 792
Finished End veneer 57 57
Top View Finished End HPL 32 32
Top
Top View(note door placement) DWC2430 1 558 796Top
Side
( p )Finished End veneer 63 63
DoorFinished End HPL 32 32
Door15 15/16 DWC2436 1 603 85215 /16opening(15 13/
Finished End veneer 74 74(15 13/16door width) Finished End HPL 39 39
17door width)
DWC2442 1 632 896
Finished End veneer 85 85
S For super susan specs, see #176024
Finished End HPL 44 44p p ,
S For garage specs, see #1460
S DWC2430 shown
S Cabinets without doors will have one3/4 back, no J-track, and adjustableshelves
S Door is set back to create flush fronts;if no cabinet on a side, you will beable to see into cabinet
S Use two hinge stiles to close off viewinto cabinet; has notched shelves
12
23
24SS24 (3 tray wood susan), add $738.
SS24X (4 tray wood susan), add $984.
For two hinge stiles and notched shelves,add $83.
IS10 March 1, 2007
WALL CABINETS1142 1142
Diagonal Wall Corner, 27 Wide, 15 Deep Diagonal Wall Corner, 27 Wide, 15 Deep
LaminateFinished Ends Doors Mel Ply
DWC272415 1 $ 727 N/A
Top ViewDWC273015 1 763 N/A
Top
Top View(note door placement) DWC273615 1 803 N/A
Top
Sid
(note door placement)DWC274215 1 820 N/A
Side
DoorVeneer Finished Ends
15 15/16Door
DWC272415V 1 899 $ 121115 15/16opening(15 13/
DWC273015V 1 899 1211p g(15 13/16door width) DWC273615V 1 965 1293door width)
17 DWC274215V 1 994 1336
F #1760
17
HPL Finished EndsS For super susan specs, see #1760
F #146027 DWC272415H 1 830 1140
S For garage specs, see #1460
C bi t ith t d ill h
27
27 1/DWC273015H 1 830 1140
S Cabinets without doors will have one3/4 back no J-track and adjustable
27 1/4 DWC273615H 1 883 12123/4 back, no J-track, and adjustableshelves DWC274215H 1 912 1253shelves
S Door is set back to create flush fronts;if no cabinet on a side, you will beable to see into cabinet
S Use two hinge stiles to close off viewinto cabinet; has notched shelves
S Both ends finished automatically15
SS24 (3 tray wood susan), add $738.
SS24X (4 tray wood susan), add $984.
For two hinge stiles and notched shelves,add $83.
1145 1145
Diagonal Wall Corner With Tambour Garage Diagonal Wall Corner With Tambour Garage
Laminate Doors Mel Ply
S For super susan specs see #1760DWC2430GBT 1 $ 962 N/A
S For super susan specs, see #1760
S Door is set back to create flush fronts;DWC2436GBT 1 1007 N/A
S Door is set back to create flush fronts;if no cabinets on a side, you will be DWC2442GBT 1 1036 N/Aif no cabinets on a side, you will beable to see into cabinet Veneer
S Use two hinge stiles to close off viewi bi h h d h l
DWC2430GBTV 1 1105 1397ginto cabinet, has notched shelves
18 hi h d d48 DWC2436GBTV 1 1150 1453
S 18 high garage standard
Cl i
85460
DWC2442GBTV 1 1179 1497S Clearance on garage opening:16 w x 16 h
1860
HPL16 w x 16 h
S No back in garage areaDWC2430GBTH 1 1105 1397
S No back in garage area
S Specify white melamine or naturalDWC2436GBTH 1 1150 1453
S Specify white melamine or naturalmaple melamine or flat wood IDC12
DWC2442GBTH 1 1179 1497maple melamine or flat wood IDCtambour, or traditional wood tambour;if not specified, cabinets with wooddoors receive traditional woodtambour
S Tambour may be replaced with onedoor, no charge; two doors in place oftambour, add one door style charge
S Garage must be screwed tocountertop for proper operation
S Code reflects entire unit construction,finished ends included (HPL has PVCbanding)
12Special color HPL tambour, add $124.
SS24 (3 tray wood susan), add $738.
SS24X (4 tray wood susan), add $984.
For two hinge stiles and notchedshelves, add $83.
IS11March 1, 2007
WALL CABINETS1156 1156
Wall With Straight Garage Wall With Straight Garage
Laminate Doors Mel PlyW1830GBT 1 $ 719 N/AW2430GBT 2 814 N/AW3030GBT 2 922 N/A
3036
W1836GBT 1 760 N/A3642
W2436GBT 2 839 N/A42
W3036GBT 2 986 N/A
W1842GBT 1 789 N/AW2442GBT 2 877 N/A
S 18 high garage standardW3042GBT 2 1015 N/A
S 18 high garage standard
S Specify overall height18 VeneerS Specify overall height
G d t f ll it
18W1830GBTV 1 901 $ 1090
S Garage made part of wall unit W2430GBTV 2 996 1225g p
S Clearance on garage opening: 16 W3030GBTV 2 1118 1378Clearance on garage opening: 16high W1836GBTV 1 942 1151g
S Wall cabinet back extends down into W2436GBTV 2 1021 1261Wall cabinet back extends down intogarage area W3036GBTV 2 1182 1471garage area
S Specify white melamine or natural W1842GBTV 1 971 1192Specify white melamine or naturalmaple melamine or flat wood IDC W2442GBTV 2 1059 1317maple melamine or flat wood IDCtambour, or traditional wood tambour;if ifi d bi i h d
W3042GBTV 2 1211 1512, ;if not specified, cabinets with wooddoors receive traditional wood
HPLdoors receive traditional woodtambour
W1830GBTH 1 901 1090tambour
T b b l d ithW2430GBTH 2 996 1225
S Tambour may be replaced with onedoor no charge; two doors in place of
W3030GBTH 2 1118 1378door, no charge; two doors in place oftambour add one door style charge W1836GBTH 1 942 1151tambour, add one door style charge
Garage must be screwed toW2436GBTH 2 1021 1261
S Garage must be screwed tocountertop for proper operation
W3036GBTH 2 1182 1471countertop for proper operation
Code reflects entire unit constructionW1842GBTH 1 971 1192
S Code reflects entire unit construction,finished ends included (HPL has PVC
W2442GBTH 2 1059 1317finished ends included (HPL has PVCbanding)
W3042GBTH 2 1211 1512banding)
Special color HPL tambour, add $124.
1158 1158
Wall With Open Shelf Wall With Open Shelf
Laminate Doors Mel Ply
W3018PHS 2 $ 637 N/A
18W3618PHS 2 672 N/A
1824 W3024PHS 2 654 N/A2430 W3624PHS 2 688 N/A30
W3030PHS 2 669 N/AW3630PHS 2 720 N/A
12 Veneer12W3018PHSV 2 738 $ 949W3618PHSV 2 780 1008W3024PHSV 2 762 983W3624PHSV 2 796 1031W3030PHSV 2 777 1002W3630PHSV 2 828 1076
S 12 high standard open shelf unlessspecified
HPLg pspecified
3W3018PHSH 2 738 949
S Inside opening height 3/4 less thanh lf h i ht
W3618PHSH 2 780 1008p g g 4shelf height W3024PHSH 2 762 983
S Specify overall height W3624PHSH 2 796 1031p y g
S Code reflects entire unit construction, W3030PHSH 2 777 1002Code reflects entire unit construction,must specify for finished ends,
h (HPL h PVC b di )W3630PHSH 2 828 1076p y
no charge (HPL has PVC banding)
IS12 March 1, 2007
WALL CABINETS1159 1159
Wall With Pigeon Hole Shelf Wall With Pigeon Hole Shelf
Laminate Doors Mel Ply
W3018PHC 2 $ 781 N/A
18W3618PHC 2 823 N/A
1824 W3024PHC 2 805 N/A2430 W3624PHC 2 839 N/A30
W3030PHC 2 820 N/AW3630PHC 2 871 N/A
12 Veneer12W3018PHCV 2 875 $ 1100W3618PHCV 2 917 1159
W3024PHCV 2 899 1134W3624PHCV 2 933 1182
12 W3030PHCV 2 914 1153W3630PHCV 2 965 1227
HPL
S 12 high standard unless specifiedW3018PHCH 2 875 1100
S 12 high standard unless specified
C t ti 12 id iW3618PHCH 2 917 1159
S Center section 12 wide opening
C d fl t ti it t tiW3024PHCH 2 899 1134
S Code reflects entire unit construction,t if f fi i h d d
W3624PHCH 2 933 1182must specify for finished ends,no charge (HPL has PVC banding)
W3030PHCH 2 914 1153no charge (HPL has PVC banding)
W3630PHCH 2 965 1227
1160 1160
Microwave Type A Microwave Type A
Laminate Doors Mel Ply
MCA2436 2 $ 697 N/AMCA2736 2 707 N/AMCA3036 2 753 N/A
MCA2448 2 834 N/A
MCA2748 2 845 N/AMCA3048 2 885 N/A
VeneerMCA2436V 2 937 $ 1024MCA2736V 2 948 1041MCA3036V 2 994 1095
12 Fixed Shelf MCA2448V 2 1113 1217
MCA2748V 2 1123 12341824
MCA3048V 2 1164 12792430
HPL30
MCA2436H 2 904 1024MCA2736H 2 914 1041MCA3036H 2 960 1095
MCA2448H 2 1074 1217
18 Loose Panel MCA2748H 2 1086 1234
18Loose Panel
MCA3048H 2 1124 1279
S if t t di i d dd
18Loose Panel
S Specify cutout dimensions and addcharges for factory cutout
Laminate N/C N/Ccharges for factory cutout HPL N/C N/C
S Code reflects entire unit construction,fi i h d d i l d d (HPL h PVC
Foil Wrapped 231 231,finished ends included (HPL has PVCb di )
High Gloss Foil Wrapped 296 296(banding) Wood Frame N/C N/C
Factory Cutout: Raw Inside EdgeICUT 80 80
Factory Cutout: Banded Inside EdgeICUTB 159 159
42 high cabinets available at 48 price.Specify cut to 42 high.
IS13March 1, 2007
WALL CABINETS1170 1170
Microwave Type B Microwave Type B
Laminate Doors Mel Ply
MCB2436 2 $ 575 N/A
MCB2736 2 586 N/A
MCB3036 2 595 N/A
MCB2448 2 667 N/A
MCB2748 2 677 N/A
18 , 24 , 30 MCB3048 2 686 N/A
12 Veneer12MCB2436V 2 877 $ 960
MCB2736V 2 888 977
MCB3036V 2 897 986
MCB2448V 2 972 1064
17 1/4 MCB2748V 2 983 108117 /4
MCB3048V 2 991 1089
HPL
18 MCB2436H 2 847 960
C d fl t ti it t ti
18MCB2736H 2 859 977
S Code reflects entire unit construction,must specify for finished ends
MCB3036H 2 866 986must specify for finished ends,no charge (HPL has PVC banding) MCB2448H 2 939 1064no charge (HPL has PVC banding)
MCB2748H 2 951 1081
MCB3048H 2 957 1089
42 high cabinets available at 48 price.Specify cut to 42 high.
1180 1180
Microwave Type C Microwave Type C
Doors Mel Ply
MCC2436 2 $ 661 $ 939
MCC2736 2 673 956
MCC3036 2 718 1018
Finished End veneer 74 74
18 , 24 , 30 Finished End HPL 39 3918 , 24 , 30MCC2448 2 798 1130
MCC2748 2 810 1146
MCC3048 2 854 121218 Finished End veneer 96 96
Finished End HPL 52 52
Loose Panel
Laminate N/C N/C
18Loose Panel HPL N/C N/C
18 Foil Wrapped 231 231
High Gloss Foil Wrapped 296 296
Wood Frame N/C N/C
Cutout Panels: Raw Inside Edge
ICUT 80 80S Specify cutout dimensions and add
h f f t t tCutout Panels: Banded Inside Edgep y
charges for factory cutoutICUTB 159 159
42 high cabinets available at 48 price.Specify cut to 42 high.
IS14 March 1, 2007
WALL CABINETS1200 1200
Inside Radius Wall - With Door Inside Radius Wall - With Door
Doors Mel Ply
24 IRWD2430 1 $ 752 $ 1067
23 12 rFinished End veneer 63 6323
12 12 rFinished End HPL 32 32
IRWD2436 1 811 1147
Finished End veneer 74 74
S 30 high cabinets have two adjustableh l ( h )
Finished End HPL 39 39g jshelves (shown)
36 d 42 hi h bi t h thIRWD2442 1 972 1377
S 36 and 42 high cabinets have threeadjustable shelves
Finished End veneer 85 85adjustable shelves
S Geneva Munich Harrisburg ArchFinished End HPL 44 44
S Geneva, Munich, Harrisburg Arch,and Harrisburg Square doors only
S Super susans are not available
S Standard size susans do not fit
Use special radius door style charge.
1210 1210
Inside Radius Wall - No Door Inside Radius Wall - No Door
2Laminate Doors Mel Ply
24 IRW2430 0 $ 752 N/A
25 3/16 12 rIRW2436 0 811 N/A25 /16 12 rIRW2442 0 972 N/A
Veneer
IRW2430V 0 973 $ 1071S Code reflects complete interior andexterior top & bottom; must specify for
IRW2436V 0 1050 1156exterior top & bottom; must specify forfinished ends, no charge (HPL has IRW2442V 0 1256 1383finished ends, no charge (HPL hasPVC banding)12 HPL
S 30 high cabinets have two adjustableshelves (shown)
12
IRW2430H 0 941 1071shelves (shown)
S 36 and 42 high cabinets have threeIRW2436H 0 1016 1156
S 36 and 42 high cabinets have threeadjustable shelves IRW2442H 0 1213 1383adjustable shelves
S One 3/4 back, no J-track
1220 1220
Outside Radius Wall - With Door Outside Radius Wall - With Door
1212 Doors Mel Ply1212ORWD1230 1 $ 370 $ 525
Finished End veneer 63 63
Finished End HPL 32 32
ORWD1236 1 416 590
Finished End veneer 74 74
Finished End HPL 39 39S 30 high cabinets have two fixedshelves (shown) ORWD1242 1 517 734shelves (shown)
S 36 and 42 high cabinets have three Finished End veneer 85 85S 36 and 42 high cabinets have threefixed shelves Finished End HPL 44 44
S Geneva, Munich, Harrisburg Arch,and Harrisburg Square doors only
S 3/4 backs, no J-track
Use special radius door style charge.
IS15March 1, 2007
WALL CABINETS1230 1230
Outside Radius Wall - No Door Outside Radius Wall - No Door
Laminate Doors Mel Ply
S Code reflects complete interior andt i t & b tt t if f
12 12 ORW1230 0 $ 370 N/Apexterior top & bottom; must specify forfinished ends no charge (HPL has
12ORW1236 0 416 N/A
finished ends, no charge (HPL hasPVC banding)
ORW1242 0 517 N/APVC banding)
S 30 high cabinets have two fixedVeneer
S 30 high cabinets have two fixedshelves (shown) ORW1230V 0 481 $ 528shelves (shown)
S 36 and 42 high cabinets have threeORW1236V 0 623 687
S 36 and 42 high cabinets have threefixed shelves ORW1242V 0 666 732fixed shelves
S 3/4 backs, no J-track HPLS 3/4 backs, no J-track
S Radius top shelf is standard specifyORW1230H 0 465 528
S Radius top shelf is standard, specifyfor square top shelf, no charge ORW1236H 0 604 687for square top shelf, no charge
ORW1242H 0 643 732
1240 1240
Wall Angle Corner Shelf (Straight and Diagonal) Wall Angle Corner Shelf(Straight and Diagonal)
Straight Mel Ply
WAC30 laminate $ 370 N/A12 12 12 12 WAC36 laminate 416 N/A
12 12 WAC42 laminate 517 N/A12 12
3WAC30V veneer 485 $ 533
3 WAC36V veneer 629 693
12 12 WAC42V veneer 672 73812 12
WAC30H HPL 465 528WAC36H HPL 604 687
3 WAC42H HPL 643 7323Diagonal
S Code reflects complete interior andWACD30 laminate 370 N/A
S Code reflects complete interior andexterior top & bottom; must specify for WACD36 laminate 416 N/Aexterior top & bottom; must specify forfinished ends, no charge (HPL hasWAC WACD
WACD42 laminate 517 N/Afinished ends, no charge (HPL hasPVC banding)
WAC WACDPVC banding)
30 high cabinets have two fixedWACD30V veneer 485 533
S 30 high cabinets have two fixedshelves (shown)
WACD36V veneer 629 693shelves (shown)
36 and 42 high cabinets have threeWACD42V veneer 672 738
S 36 and 42 high cabinets have three36 and 42 high cabinets have threefixed shelves WACD30H HPL 465 528
S 3/4 backs, no J-track, no doors WACD36H HPL 604 687/4 backs, no J track, no doorsWACD42H HPL 643 732
1250 1250
Bookcase Bookcase
S Specify depth (up to 18 deep) andSpecifyPer Sq Ft of Face Mel Ply
S Specify depth (up to 18 deep) andface dimensionsSpecify
SpecifyBOOK laminate $ 76 N/A
S Bookcases over 36 wide haveSpecify
BOOKV veneer 108 $ 117Bookcases over 36 wide havevertical divider installed, upchargeapplies
BOOKH HPL 105 117applies
S Code reflects complete interior andi d b if
If vertical divider isrequired, add: 96 119p
exterior top and bottom; must specifyfor finished ends, no charge (HPL hasPVC banding)
S Bookcases have standard 3/4 thicktop
S Metric gang drilled (32mm spacing)for adjustable shelves
S No J-track
Specify
IS16 March 1, 2007
WALL CABINET MODIFICATIONS
1300 1300
Finished Interior Finished Interior
Mel Ply
FININTBB2: interior beadboard back and standard FININTV veneer $ 275 $ 138FININTBB2: interior beadboard back and standardinterior sides finished FININTH HPL 275 138
FININTBB2 beadboard 335 198
S Interior same as doors unlessspecified
S Exterior top and bottom match interiorstandard
S Specify for finished ends, no charge
S No J-track on finished interiorcabinets
Add to price of cabinet.
Specify MBOT for melamine bottom to matchother cabinets, add $34.
1310 1310
Peninsula Wall Peninsula Wall
IDC
PENN $ 277
S Doors on both sides of cabinet
S 3 vertical center support on top of allpeninsula walls
Add to price of cabinet.
Add for extra door style charges.
1350 1350
Extended Side Up, Down, Or Back Extended Side Up, Down, or Back
Extend Side Up or Down Mel Ply
EXTSIDE 0 - 18 $ 39 $ 48
EXTSIDE2 >18 - 24 51 62
Extend Side Back
EBSB 0 - 12 83 102
Extend Back Down
S Maximum extension up or down is 24 EXTBACKDN 0 - 18 182 182S Maximum extension up or down is 24
S Maximum extension back is 12
S Maximum extension back down is 18
S Specify left, right, or both
S Extend left side down (shown)
S If finished end ordered whenextending side up or down, completeextension side finished inside & out;does not apply to extending side back
Specify
Add to price of cabinet.
Charges are cumulative; e.g. extend side up 6and back 3 are two charges.
IS17March 1, 2007
WALL CABINET MODIFICATIONS1370 1370
Valance Attached Valance Attached
IDC
VAX $ 56
S Specify overall height
S Specify valance pattern/type
S Visible seam between valance andcabinet top or bottom
S Wood valance is standard 3 1/2 high
S Other valances are standard 4 high
S Valance may be attached to top orbottom of cabinet (bottom attachmentshown)
Specify
Add to price of cabinet.
Add valance price.
1390 1390
Flush Finished Top Or Bottom Flush Finished Top Or Bottom
Mel Ply
FLTOPV veneer top $ 118 $ 129
FLTOPH HPL top 50 129
FLBOTV veneer bottom 118 129
FLBOTH HPL bottom 50 129
S No seams on full top of cabinet
Add to price of cabinet.
1395 1395
Matching Bottom Matching Bottom
Mel Ply
MBOT laminate $ 34 N/A
S Edgebanding visible on bottom ofcabinet sides; for flush finished
MBOTV veneer 52 N/Ccabinet sides; for flush finishedbottom, see catalog #1390 MBOTH HPL 34 N/Cbottom, see catalog #1390
S Use laminate code when you want thestandard melamine bottom, example:standard bottom on finished interiorcabinets vs. finished bottom, thereforematching other wall cabinet bottoms
S If specifying MBOT on finished interiorcabinet, the bottom will match otherwall bottoms
Add to price of cabinet.
IS18 March 1, 2007
WALL CABINET MODIFICATIONS1410 1410
Recessed Bottom Recessed Bottom
Mel Ply
RECBOT laminate $ 199 N/A
RECBOTV veneer 246 $ 271
RECBOTH HPL 226 271
S Specify depth of recess
S Bottom of cabinet is raised up; sidesand doors are lower than bottom
S Includes valance on front bottom ofcabinet
Specify
Add to price of cabinet.
1420 1420
Door Modifications Door Modifications
IDC
S CHGDOOR: change doort d h t d d
CHGDOOR $ 66garrangement; used when standardopening configuration is modified or
170_ hinge upcharge per pair 10opening configuration is modified orthree doors on two door cabinet
S 3 stiles and rails available certaindoor styles only, see door style pages
If no doors on cabinet, deduct $60 list pernormal door.
Add to price of cabinet.
Add extra door style charges.
1430 1430
Wall Pipe Chase Wall Pipe Chase
CUTOUTW Mel Ply
A CUTOUTW standard $ 152 $ 152
A
ACUTOUTWS special 268 268
S When ordering, furnish simple sketchand dimensions
S Sketch and dimensions shown are forillustration only
CUTOUTWS
A
D
C
A
B
B
B
A B C
D
Add to price of cabinet.
IS19March 1, 2007
WALL CABINET MODIFICATIONS1440 1440
Oversize Cabinet Oversize Cabinet
Mel PlySpecify AD1 up to 6 $ 185 $ 224
AD2 up to 12 271 331
AD3 up to 18 402 491
S Use for height & width modificationswhen larger cabinet is not available;use for all depth modifications
S Only one charge per cabinetS Add all dimension changes to findappropriate charge
Specify
Specify
Add to price of cabinet.
1450 1450
Wall Cabinet Cutdown Wall Cabinet Cutdown
IDCSpecify WCD N/C
S Start with the next largest standardsize cabinet and specify allappropriate cutdownsSpecify
Specify
p y
1460 1460
Diagonal Wall Garage Diagonal Wall Garage
/Mel Ply
S 18 high garage standard24 / 27 DWCG laminate $ 404 N/A18 high garage standard
S Garage made part of DWC unit DWCGV veneer 547 $ 601Garage made part of DWC unit
S Clearance on garage opening: DWCGH HPL 547 601Clearance on garage opening:16 w x 16 h
S No back in garage area
S Specify white melamine or naturalmaple melamine or flat wood IDCtambour, or traditional wood tambour;if not specified, cabinets with wooddoors receive traditional woodtambour
S Tambour may be replaced with onedoor, no charge; two doors in place oftambour, add one door style charge
S Garage must be screwed tocountertop for proper operation
S Code reflects entire unit construction,finished ends included (HPL has PVCbanding)
Specify
18
12 / 15
Special color HPL tambour, add $124.
Add to price of cabinet.
Cut down garage height, no charge.
IS20 March 1, 2007
WALL CABINET MODIFICATIONS1470 1470
Straight Wall Garage Straight Wall Garage
S 18 high garage standard
U t 36 id il blLaminate Mel Ply
S Up to 36 wide garage available SWG up to 24 w $ 404 N/AS Garage made part of wall unit SWG2 up to 36 w 455 N/AS Clearance on garage opening: 16 high VeneerS Wall cabinet back is full height SWGV up to 24 w 586 $ 645S Specify white melamine or natural maplemelamine or flat ood IDC tambo r or
SWG2V up to 36 w 651 717p y pmelamine or flat wood IDC tambour, ortraditional wood tambour; if not specified, HPLtraditional wood tambour; if not specified,cabinets with wood doors receive traditionalSpecify SWGH up to 24 w 586 645cabinets with wood doors receive traditionalwood tambour
18
SpecifySWG2H up to 36 w 651 717
S Tambour may be replaced with one door, nocharge; two doors in place of tambour, addone door style charge
S Garage must be screwed to countertop forproper operation
S Code reflects entire unit construction, finishedends included, (HPL has PVC banding)
18 Special color HPL tambour, add $124.
Add to price of cabinet.
Cut down garage height, no charge.
1480 1480
Drawer Garage Drawer Garage
Laminate Mel Ply
GARD up to 6 h $ 314 N/A
GARDD up to 6 h 538 N/A
S 18 high garage standard GARD2 up to 12 h 538 N/A18 high garage standard
S Up to 36 wide garage available GARD3 up to 18 h 764 N/AUp to 36 wide garage available
S Garage made part of wall unit VeneerS Garage made part of wall unit
S Specify overall height GARDV up to 6 h 381 $ 410S Specify overall height
S Equal height drawer fronts GARDDV up to 6 h 670 728S Equal height drawer fronts
S Dodd’s Dovetail drawers have TandemPlusGARD2V up to 12 h 670 728
S Dodd’s Dovetail drawers have TandemPlusguides at 7/8 extensionSpecify
GARD3V up to 18 h 884 964guides at /8 extension
S Both ends finished no chargeSpecify
HPLS Both ends finished no charge
S GARD - 1 drawer up to 6 high18 GARDH up to 6 h 347 410S GARD - 1 drawer up to 6 high
S GARDD - 2 drawers (side by side) up to 6 high
18GARDDH up to 6 h 606 728
S GARDD - 2 drawers (side by side) up to 6 high
S GARD2 2 drawers up to 12 highGARD2H up to 12 h 606 728
S GARD2 - 2 drawers up to 12 high
S GARD3 3 drawers up to 18 high (shown)GARD3H up to 18 h 829 964
S GARD3 - 3 drawers up to 18 high (shown)Add to price of cabinet.
Cut down garage height, no charge.
Add for drawer front style charges.
1490 1490
Door End Of Wall Door End Of Wall
S Hinged on wall side IDCg
S Adds 3/4 to cabinet widthCabinet
DEW $ 2314
S 3/4 back
S Wider widths may requirefixed shelves
S 12 deep with 3/16 gap isstandard, can specify12 11/16 deep no charge
S Door is operational
S All door styles are available
S Foil doors have white backs
11 13/16 dstandard
12 11/16 doptional
CabinetFront
CabinetFront Add to price of cabinet.
Add door style charge.
IS21March 1, 2007
WALL CABINET MODIFICATIONS1505 1505
Decorative Door Applied Wall Decorative Door Applied Wall
Finished End IDC
CabinetFront
WDDAL laminate $ 162Front
WDDAV veneer 216
11 13/16 dstandard
WDDAH HPL 181
S Decorative door attached to side ofcabinet, adds 3/4 to cabinet widthexcept on clipped corners
S Door is not operational
S Foil doors have white backs
standard
12 11/16 doptional
CabinetFront
Add to price of cabinet.
Includes finished end charges.
Add door style charges.
1510 1510
Open Shelf Open Shelf
Laminate Mel Ply
PHS24 0 - 24 w $ 156 N/A
PHS42 >24 - 42 w 202 N/A
Veneer
PHS24V 0 - 24 w 251 $ 275
S Up to 42 wide PHS42V >24 - 42 w 310 341Up to 42 wide
S 12 high standard unless specified12 HPL12 high standard unless specified
S Inside opening height 3/4 less than PHS24H 0 - 24 w 251 275Inside opening height /4 less thanshelf heightSpecify PHS42H >24 - 42 w 310 341
S Specify overall height
S Code reflects entire unit construction,must specify for finished ends, nocharge
S Laminate - PVC banding
S Veneer - real wood banding
S HPL - PVC banding
>12 up to 18 high, add 20%.
>18 up to 24 high, add 50%.
Add to price of cabinet.
1512 1512
Open Shelf Tilt Down Open Shelf Tilt Down
Mel Ply
PHSTO24 0 - 24 w $ 163 $ 230
PHSTO42 >24 - 42 w 217 296
S 6 high standard
S Up to 48 wide
S Slab fronts only
S Finished interior and finished ends notincluded
6Specify
Add to price of cabinet.
Add drawer front style charges.
For finished end charge, see catalog #7082.
IS22 March 1, 2007
WALL CABINET MODIFICATIONS1515 1515
Plate Rack Unit Plate Rack Unit
Laminate Mel Ply
PRU24 0 - 24 w $ 366 N/A
PRU42 >24 - 42 w 417 N/A
S 13 1/2 high shelf standard unless VeneerS 13 /2 high shelf standard unlessspecified PRU24V 0 - 24 w 465 $ 511p
S Plate rack opening height 2 1/4 lessth ifi d h lf h i ht ( t d d
13 1/2PRU42V >24 - 42 w 523 575p g g 4
than specified shelf height (standardallows for 11 1/4 diameter plates)
13 1/2HPLallows for 11 1/4 diameter plates)
S 1 7/16 space between dowelsSpecify PRU24H 0 - 24 w 440 511
S 1 7/16 space between dowels
S Specify overall height
p y
PRU42H >24 - 42 w 498 575S Specify overall height
S 3/8 wooden dowels in wood supports
S Code reflects entire unit construction,must specify for finished ends, nocharge (not including platerack inserts)
S Laminate - PVC banding
S Veneer - real wood banding
S HPL - PVC banding
>13 1/2 up to 18 high, add 20%.
>18 up to 24 high, add 50%.
Add to price of cabinet.
1520 1520
6 High Spice Drawer Shelf 6 High Spice Drawer Shelf
Mel Ply
S Drawers operate without guides SDS24 0 - 24 w $ 698 $ 768S Drawers operate without guides
S Drawer box is flush with dividersSDS36 >24 - 36 w 865 951
S Drawer box is flush with dividers SDS48 >36 - 48 w 1031 1136S Dimensions of drawers vary withindividual cabinets, approximately onedrawer every 6
S Wood, Dodd’s dovetail construction;dovetails exposed on drawer sidesstandard, specify front exposure, nocharge
6Specify
Add to price of cabinet.
Add for finished ends.Add for finished interior. Must specify forfinished ends with finished interior at nocharge.
For finger wells on spice drawers, add $19each.
1530 1530
Pigeon Hole Pigeon Hole
Laminate Mel Ply
PHC24 0 - 24 w $ 273 N/A
PHC42 >24 - 42 w 353 N/A
Veneer
S 12 high standard unless specified PHC24V 0 - 24 w 368 $ 40712 high standard unless specified
S Up to 42 wide PHC42V >24 - 42 w 447 492S Up to 42 wide
S Specify overall height12SpecifyHPLS Specify overall height
S Center section 12 wide opening,
12SpecifyPHC24H 0 - 24 w 368 407S Center section 12 wide opening,
outside pigeon holes will vary with PHC42H >24 - 42 w 447 492outside pigeon holes will vary withcabinet width
S Code reflects entire unit construction,must specify for finished ends, nocharge
S Laminate - PVC banding
S Veneer - real wood banding
S HPL - PVC banding
12 inside
>12 up to 18 high, add 20%.
>18 up to 24 high, add 50%.
Add to price of cabinet.
IS23March 1, 2007
WALL CABINET MODIFICATIONS1535 1535
Pigeon Hole Tilt Down Pigeon Hole Tilt Down
Mel Ply
PHCTO24 0 - 24 w $ 286 $ 373
PHCTO42 >24 - 42 w 365 500
S 6 high standard
S Up to 48 wide
S 3/4 dividers
S Slab fronts only
S Finished interior and finished ends notincluded
6Specify
Add to price of cabinet.
Add drawer front style charges.
For finished end charge, see catalog #7082.
1550 1550
Add Blind To Wall Add Blind To Wall
12SpecifyMel Ply
12SpecifyBLINDW $ 180 $ 249
S See IDC cabinet details section forinstallation schematic
S Blind constructed with 3/4 material
S Specify blind left or blind right(blind right shown)
S Standard 15 blind
S 3 or 6 accent strip sent loose,please specify
S Single door cabinets hinged on blindside unless specified
Add to price of cabinet.
Add for required accent strip, see catalog#1810.
1560 1560
Add Toe Space Add Toe Space
Mel Ply
ADDLEG $ 113 $ 138
S Add 4 1/2 high toe space, specifyoverall cabinet height
S Shipped loose
S Includes toe board and appropriatenumber of legs
Specify
Add to price of cabinet.
One charge per cabinet.
IS24 March 1, 2007
WALL CABINET MODIFICATIONS1570 1570
Angled Front And/Or Sides Angled Front And/Or Sides
45_angledfront
IDC
12
45 frontside
side ANGLEfirst
22 1/2_ or 45_ $ 20212
12back
side
ANGLE2additional each22 1/2_ or 45_ 15012
Specify ANGLESP special angle 356
S 22 1/2_ angle left side is shown
S Specify widest cabinet dimension
12
5
22.5_Specify
angledside
front
side
back
Add to price of cabinet.
Largest dimension indicates original cabinetcharge.
Add all other modification charges,as applicable.
Add for accent strip if necessary,see catalog #1810.
1575 1575
3 x 3 Clipped Corner 3 x 3 Clipped Corner
Cabinet End Per Clip Mel Ply
ANGLECC $ 151 $ 151
Accent Strip Support ANGLECCVTDV 247 270
S 3 x 3 clipped corners do not followexact 45_ angle due to construction;they are at 53.13_ (see print)
S Use ANGLECC charge for standardclipped corner, no accessories; useANGLECCVTDV charge for sidemounted accessories or drawerstacks
S If decorative door is ordered,decorative door will be built intocabinet dimension
Accent Strip
Hinge Stile
p pp
53.13_ Add to price of cabinet.
Add for required accent strips,see catalog #1810.
Use angle charge (catalog #1570) for clipsother than 3 x 3 .
1600 1600
One Piece Units One Piece Units
IDC
SEAM $ 150
S Specify cabinets from left to right
S Can seam any number of cabinets
S Not recommended over 72 length
S Individual units attached at factory withcabinet to cabinet screws
S Visible seam between units
S When seamed, IDC units are extremely heavy
Add totals of all cabinets seamed and oneseam charge.
IS25March 1, 2007
WALL CABINET MODIFICATIONS1610 1610
Finished Back/Back Modification Finished Back/Back Modification
Finished Back Mel Ply
FFBACKH HPL $ 235 $ 288
FFBACKV veneer 235 288S Does not change cabinet depth
N b kFinishedCabinet
3/4 BackS No seam on back
S Melamine cabinet: HPL back
CabinetBack BACK34 96 119
S Melamine cabinet: HPL back
S HPL cabinet: HPL back
S Veneer cabinet: veneer back
S 3/4 back replaces 1/4 back andhanger strips
BackAdd to price of cabinet.
1640 1640
Shelf Modifications Shelf Modifications
Add One Set MetalShelf Standards Mel Ply
ADJ24 1 adj shelf $ 55 $ 55
Add dj t bl t l h lf t d dADJ30 2 adj shelves 72 72
S Add adjustable metal shelf standardsto cabinet (surface mounted ADJ36 3 adj shelves 90 90to cabinet (surface mountedstandards) ADJ42 3 adj shelves 102 102)
S When adding a fixed shelf to cabinet, Add One Fixed ShelfWhen adding a fixed shelf to cabinet,specify placement FIXSH 96 119
Add 1 1/2 Solid Stock to Face of Shelf withEdge Profile on Top Edge Per Lineal Ft. EachXSHSS 18 19
Add to price of cabinet.
1650 1650
Real Wood Edgebanding Real Wood Edgebanding
S Not available on melamine cabinetsS Not available on HPL plywood
Mel PlyS Not available on HPL plywoodcabinets BANDW N/A $ 101cabinets
S Not available painted or withDesigner’s Line finishes unlessfinished interior
Charge is per cabinet.
IS26 March 1, 2007
WALL CABINET ACCESSORIES
1705 1705
Wall Tandem Swiveling Pull Out Wall Tandem Swiveling Pull Out
IDC
WS18 $ 985
WS27 1055
S Chrome pull out and door rack
S WS18:two fixed shelves on door shelftwo fixed shelves on pull out frame3/4 thick back panelminimum opening: 10 1/2 w x 16 1/2 h x 11 1/4 d
S WS27:three fixed shelves on door shelfthree fixed shelves on pull out frame3/4 thick back panelminimum opening: 10 1/2 w x 24 3/4 h x 11 1/4 d
S Opening the cabinet door makes the pull outshelves slide forward
S Hafele Item
Add to price of cabinet.
1710 1710
Pantry Spice Rack Wall Pantry Spice Rack Wall
Wood WireWood IDC
Wood WirePSR24 $ 164
PSR30 164
PSR36 180Wood:
PSR42 189S Not available on cabinet under 12 wideS Code reflects minimum cabinet height WireS Code reflects minimum cabinet heightS 4 3/16 deep PSRW1224 2024 /16 deep
S Adjustable shelvesNot available with 170_ hinge
PSRW1824 202S Not available with 170_ hinge
Wire:
S Fixed shelvesS ChromeS Available sizes are:9 5/8 w x 16 h x 2 5/8 d -- 4 shelves15 1/2 w x 16 h x 2 5/8 d -- 4 shelves
S Not available on cabinet under 12 wideS Hafele ItemS Not available with 170_ hinge
Add to price of cabinet.
IS27March 1, 2007
WALL CABINET ACCESSORIES1712 1712
Aluminum Roller Shutters Aluminum Roller Shutters
Version B ALUMINUMROLLER SHUTTERS
Call factory fordetails and quote
S Call factory for details and quote
S Installed in straight wall cabinets toenclose opening
S Version B: installed on a track system thatgoes down the back, visible from insidethe cabinet
S Version C: installed to roll up at top ofcabinet
S Cabinet priced separately
S Hafele item
Version C
1713 1713
Clipo Sliding Door Hardware Clipo Sliding Door Hardware
S Sliding door hardwareList Per Cabinet
S Sliding door hardware
S Add to price of cabinet CLIPO SLIDING DOORS fax for quoteS Add to price of cabinet
S Fax factory for quote
S Double door cabinet only
S Hafele item
1720 1720
Wine Glass Holder Wine Glass Holder
12IDC
12GLRACK 0 - 24 $ 272
GLRACK2 >24 - 42 407
S For stemmed glassware
S Up to 42 wide
S Applied to cabinet, maximum numberof holders will be centered
S Specify depth if different thanstandard
S Oak, maple, and cherry, solid wood
1 1/2
3/41/4each
3/4 3 1/4
2 3/4 1 1/4
Add to price of cabinet.
IS28 March 1, 2007
WALL CABINET ACCESSORIES1730 1730
Wine Rack Shelf Wine Rack Shelf
IDC
2 1/2WRS 0 - 24 $ 153
2 1/2WRS2 >24 - 36 229
WRS3 >36 - 48 306
S Solid wood rack mounted on 1/2plywood, up to 36 wide cabinets
S Replaces standard shelf, maximumnumber of holders will be centered
S Specify depth of cabinet
4 1/4
4 1/4
4 1/4
4 1/4
Specify
Add to price of cabinet.
1740 1740
Wine Bottle Insert Wine Bottle Insert
Per Sq. Ft. Mel Ply
WBI laminate $ 83 N/A
WBIW veneer 102 $ 111
WBIH HPL 102 111
WBIR laminate 165 N/A
WBIRV veneer 200 221
WBIRH HPL 200 221
S WBI has approximately 4 openings
S WBIR has PVC round inserts, black orwhite only, must specify color
S Code reflects entire cabinetconstruction (wall and insert), mustspecify for finished ends, no charge
WBI WBIR
Add to price of cabinet.
Round up to next square foot.
1750 1750
What Not Shelf What Not Shelf
Specify 11 1/ or 125Mel Ply
Specify 11 1/4 or 125WS18 $ 174 $ 174
WS30 223 223
WS36 243 243
S Shipped loose only WS42 266 266Shipped loose only
S Specify curved left or right WS48 315 315Specify curved left or right
S 3/4 solid wood shelves attached to 3/4 WS60 363 363/4 solid wood shelves attached to /4plywood back w/finished edge
S Specify 11 1/4 or 12 deep WSSloose(each) 98 98Specify 11 /4 or 12 deep
S Radius top shelf is standard, specify for WSFFT 102 102Radius top shelf is standard, specify forsquare top shelf, no charge
S WSS is for a single 3/4 solid wood shelf
S WSFFT is for 1 1/2 face frame rails;applied to front and one side
Add to price of cabinet.
Add for finished end on cabinet.
Specify and add material cost for finishedpanel attached to loose shelf.
IS29March 1, 2007
WALL CABINET ACCESSORIES1760 1760
Wall Super Susan Wall Super Susan
IDC
Single Wood Tray $ 246
SS24 3 tray wood 738
SS24X 4 tray wood 984
S SS24 for DWC2430
S SS24X for DWC2436 & DWC2442
S 18 diameter wood trays mounted onadjustable shelves
S No custom sizes
Add to price of cabinet.
1770 1770
Mid Shelf Mid Shelf
11 3/4Specify
IDCSpecify2 MS24 0 - 24 $ 228
9 MS36 >24 - 36 281
MS48 >36 - 48 333
S Wood construction
S Shipped loose for field installation
S 3/4 sides, shelf, and front strip
S 1/2 top
S 1/4 back
S Specify length up to 48
4
9
1
2
Side View
Front Detail
1780 1780
Corner Mid Shelf Corner Mid Shelf
24IDC
243 CMS $ 310
S Wood construction
S Shipped loose for field installation
S 3/4 sides, shelf, and front strip
S 1/2 top
S 1/4 back
S Specify width up to 36
S Specify under DWC or End Of Run
11 3/4
11 3/4
11 3/4
24
3
3
9
Top View(for under DWC)
Top View(for end of wallcabinet run)
IS30 March 1, 2007
WALL CABINET ACCESSORIES1790 1790
Plate Rack Insert Plate Rack Insert
IDC
PRACK $ 246
S Standard 12 open shelf willaccomodate 10 diameter plates
S Must specify overall height
S 3/8 dowels are removable
S Solid wood
1 7/16 openings
Specify
3/8 dowels
3/4 x 3/4 solid cleats
Add to price of open shelf.
Price reflects installation into open shelf,add for open shelf.
1800 1800
Wall Fillers Wall Fillers
Fillers Mel Ply
WF3L laminate $ 106 N/A
WF3V veneer 135 $ 147
WF3H HPL 129 141
WF6L laminate 113 N/A
WF6V veneer 147 163
WF6H HPL 141 156
Fillers with One Finished End Panel
WFF3 laminate 153 N/A
WFF3V veneer 159 174
WFF3H HPL 153 168
WFF6 laminate 163 N/A
S Shipped assembled WFF6V veneer 169 187pp
S Specify height WFF6H HPL 163 180p y g
S Standard at 12 7/8 deep if no accentt i d d
Fillers with Two Finished End Panels8 pstrip ordered
S if d l tt h d l ft i htWFF3D laminate 178 N/A
S Specify end panel attached left or right(attached right shown) WFF3DV veneer 185 201(attached right shown)
S For foil applications use laminate or WFF3DH HPL 178 194S For foil applications, use laminate orspecify HPL selection WFF6D laminate 184 N/Aspecify HPL selection
WFF6DV veneer 192 211
WFF6DH HPL 184 202
IS31March 1, 2007
WALL CABINET ACCESSORIES1805 1805
3 Wall Fillers -- Veneer With Half Spool & Rod Post Attached 3 Wall Fillers -- Veneer With Half Spool &Rod Post Attached
S Shipped assembled 3 Fillers Mel PlyS Shipped assembled
S Must specify height WF3VSR veneer $ 399 $ 411S Must specify height
S Standard at 12 deep WF3VSRR veneer 399 411S Standard at 12 deep
S Specify end panel attached left or 3 Fillers with One Finished End PanelS Specify end panel attached left orright (attached right shown) WFF3VSR veneer 424 439g ( g )
S 3 Half Spool & Rod Post attachedfl h ith d f fill 8 hi h t
Specify WFF3VSRR veneer 424 439pflush with edges of filler, 8 high topand bottom 3 Fillers with Two Finished End Panelsand bottom
S SR = Plain Rod WFF3DVSR veneer 449 465S SR = Plain Rod
S SRR = Reed Rod WFF3DVSRR veneer 449 465S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
3 wide
1 1/2
1807 1807
Wall Pull Out Fillers Wall Pull Out Fillers
Fillers Mel Ply
WF330PO $ 370 $ 370
WF336PO 370 370
WF342PO 370 370
St d d ith d d tWF630PO 440 440
S Standard with square edged accentas filler WF636PO 440 440as filler
S For additional accents or turnings WF642PO 440 440S For additional accents or turningsplease specify
S Rev-A-Shelf
1810 1810
Wall Accent Strips Wall Accent Strips
Accent Strip IDC
AS3GE geneva laminate $ 17
AS3 wood 92
S To be used with filler to create a AS3H HPL 89S To be used with filler to create auniform front, flush with doors andd
AS3F Foil 92,drawers AS3FG high gloss foil 124
S Shipped loose for field installation AS6GE geneva laminate 28S Banded or shaped one long and two
h t d t d d if fAS6 wood 116p g
short edges standard, specify forbanded or shaped four edges for
AS6H HPL 111banded or shaped four edges foraccent strips over 2 1/2 wide AS6F Foil 114accent strips over 2 1/2 wide
S Accent strips with flutes will have AS6FG high gloss foil 192S Accent strips with flutes will haveflutes stop 1 1/2 from top and bottom Accent Strip with Three Flutesflutes stop 1 /2 from top and bottomunless specified with print AS3HF wood 200p p
S Accent strips with three flutes, twod t i l t ill
AS6HF wood 222p ,grooves, and two circle routes willhave 1 1/2 between them and the top
AS3FF Foil 122have 1 1/2 between them and the topand bottom unless specified with print AS6FF Foil 175and bottom unless specified with print
S Foil wrapped accent strips with threeflutes two grooves and two circle
Accent Strip with Three Flutes,Two Grooves and Two Circle Routesflutes, two grooves, and two circle
routes are available in the same foil AS3HFC wood 294routes are available in the same foilas the foil wrapped doors AS6HFC wood 316pp
AS3FFC Foil 144
AS6FFC Foil 196
IS32 March 1, 2007
WALL CABINET ACCESSORIES1820 1820
Wall Radius End Wall Radius End
S 2 1/4 radius on unit, not true 3 Single Height HPL Ven2 /4 radius on unit, not true 3
S Single Radius End:Width 3
WRE30 30 $ 317 $ 333gWidth: 3Depth: 12 7/8
WRE36 36 416 437Depth: 12 7/8Height: specify WRE42 42 503 529g p y
S Double Radius End:Width 3
DoubleWidth: 3Depth: 13 3/4
DWRE30 30 507 533Depth: 13 3/4Height: specify DWRE36 36 670 703g p y
S HPL or veneer applied over curvedbuildup
DWRE42 42 832 874buildup
S Shipped loose for field installation
S For foil applications, specify HPLselection
WRE DWRE
Add to price of cabinet.
1840 1840
Vertical Divider In Wall Vertical Divider In Wall
Mel Ply
VTDV $ 96 $ 119
S Specify fixed divider location
S Fixed, edgebanded, 3/4 material tomatch interior
Add to price of cabinet.
1850 1850
Tray Divider Tray Divider
Per Divider Mel Ply
TRAY vinyl $ 50 $ 50S Specify quantity of dividers in the opening TRAYW wire 66 66S Dividers will be centered unless specified on order ETRAY plywood 72 72S Chrome; Feeny item
S Dividers are removableAdd to price of cabinet.
IS33March 1, 2007
HOODS
1905 1905
Hood A Hood A
S Due to moldings cabinet12 (14 Elite) Doors Trad. Elite
S Due to moldings, cabinetdimensions are 21 1/8 d(23 1/ d Eli )
1 1/2 HOODA30 0 $ 1733 $ 2142/8(23 1/8 deep Elite)
F id l d d fl d
1 /2
HOODA36 0 1893 2333S Four side angled and flaredout
S No removable panel, onlybottom access to liner area
S Specify for no beadedgrooves, no charge
S Custom liner required, notsupplied by Holiday Kitchens
S See section 1970 forVent-A-Hood Blower/LinerCross Reference chart andpricing
24
11 , 17
30 , 3620 1/2
(22 1/2 Elite)
5 (2 7/8between moldings)
Must purchase liner and blower unit separately.
1930 1930
Hood B Hood B
12 (14 Elit )Doors Trad. Elite
Inset12 (14 Elite)HOODB30 2 $ 1071 $ 1361
30 , 36 , 42 5 HOODB36 2 1171 149630 , 36 , 42 5
HOODB36P 2 1171 1496
HOODB42P 2 1271 1631
S Hinged, operating split doors
S See section 1970 forVent-A-Hood Blower/LinerCross Reference chart andpricing
24
*20 1/2(22 1/2 Elite)
or*23 3/4
(25 3/4 Elite)
5
Trad Elite* Hood B30/B36 depth: 20 1/2 22 1/2* Hood B36P/B42P depth: 23 3/4 25 3/4
Add for door style charges.
Must purchase light/blower unit separately.
1935 1935
Hood C Hood C
Barrington12 (14 Elite) Doors Trad. Elite
BarringtonCollection11/2
( )
HOODC33 0 $ 1389 $ 1636Collection11/2HOODC39 0 1497 1768
S 33 wide cabinets are shown at left5 (2 7/
HOODC39P 0 1497 1768S Front panel overlays side returns by
1/ on each side and is removable
5 (2 7/8between HOODC45P 0 1605 1900
1/8 on each side and is removable
S Features chair rail on top and bottomof valance area
S See section 1970 for Vent-A-HoodBlower/Liner Cross Reference chartand pricing
Trad Elite* Hood C33/C39 depth: 20 1/2 22 1/2* Hood C39P/C45P depth: 23 3/4 25 3/4
24
*20 1/2(22 1/2 Elite)
or *23 3/4(25 3/4 Elite)
betweenmoldings) Must purchase liner and blower unit separately.
IS34 March 1, 2007
All Hoods available in IDC.Construction and pricing is Traditional and Elite.
HOODS1936 1936
Hood D Hood D
12 (14 Elite) Doors Trad. Elite
1 1/Barrington
12 (14 Elite)HOODD33 0 $ 1121 $ 1426
1 1/2BarringtonCollection HOODD39 0 1221 1491
33 id bi h l f2 7/
CollectionHOODD39P 0 1221 1491
S 33 wide cabinets are shown at left2 7/8between
HOODD45P 0 1331 1621
S Front panel overlays side returnsby 1/8 on each side and isremovable
S Features chair rail on top andbottom of valance area
S See section 1970 for Vent-A-HoodBlower/Liner Cross Referencechart and pricing
24
betweenmolding
*20 1/2(22 1/2 Elite)or *23 3/4
(25 3/4 Elite)
Trad Elite* Hood D33/D39 depth: 20 1/2 22 1/2* Hood D39P/D45P depth: 23 3/4 25 3/4
5
Must purchase liner and blower unit separately.
1937 1937
Hood E Hood E
S Three sided flare featuring12 18 2412 (14 Elite) Doors Trad. Elite
S Three-sided flare featuringsmall crown molding at
12 ,18 , 24 1 1/2
( te)
HOODE3036 0 $ 2935 $ 2935small crown molding atbottom
2
HOODE3636 0 3140 3140bottom
S Any size modifications, must HOODE3636P 0 3140 3140S Any size modifications, mustfax print for quote HOODE4236P 0 3345 3345p q
S Dimensions are box sizes;allow for molding projection(ex: small crown as shownadds 4 1/2 to overall width)
S See section 1970 forVent-A-Hood Blower/LinerCross Reference chart andpricing
36
30 , 36 ,42
12
6*20 1/2
(22 1/2 Elite)or *23 3/4
(25 3/4 Elite)
Trad Elite* Hood E30/E36 depth: 20 1/2 22 1/2* Hood E36P/E42P depth: 23 3/4 25 3/4
Must purchase liner and blower unit separately.
1938 1938
Hood F Hood F
S Three-sided flare featuring mini12 ,18 12 (14 Elite) Doors Trad. EliteS Three-sided flare featuring mini
crown18 ,24
12 (14 Elite)HOODF3039 0 $ 3105 $ 3105
S With wainscot paneling featured onfront left & right; horizontal grain
41/2 HOODF3639 0 3310 3310front, left & right; horizontal grainon wainscot paneling
4 /2
HOODF3639P 0 3310 3310on wainscot paneling
S Any size modification, must fax HOODF4239P 0 3515 3515Any size modification, must faxprint for quote
S Dimensions are box sizes; allowfor molding projection (ex: minicrown as shown adds 2 1/8 tooverall width)
S See section 1970 for Vent-A-HoodBlower/Liner Cross Referencechart and pricing
39
30 , 36 , 42
12
*20 1/2(22 1/2 Elite)
or *23 3/4(25 3/4 Elite)
Trad Elite* Hood F30/F36 depth: 20 1/2 22 1/2* Hood F36P/F42P depth: 23 3/4 25 3/4
Must purchase liner and blower unit separately.
IS35March 1, 2007
All Hoods available in IDC.Construction and pricing is Traditional and Elite.
HOODS1939 1939
Wood Hood Wainscot Wood Hood Wainscot
Doors Trad. Elite
26WHWCP45 0 $ 2736 $ 3317
Inset26 WHWCP51 0 2910 3536Inset
45 WHWCP57 0 3090 3749
S Standard with 3 equal wainscotpanels at top; other face designoptions available, must specify
S Mantle shelf area with valance andmolding options, must specify
S Sizes may vary depending on thefollowing design options selected
Face Design Options:
S 3 wainscot panels, center panellarger (approximately 1/4, 1/2, 1/4)
S 3 equal doors on front; fixed orhinged, must specify
S 3 doors on front, center door larger;fixed or hinged, must specify
Valance Styles:
S Arched, straight, or straight withchair rail at bottom
Molding Types:
S Small, Large, or Shaker Crown; orInsert Crown with Rope or Dentil
S See section 1970 for Vent-A-HoodBlower/Liner Cross Reference chartand pricing
30
22 1/2
45
36
18
43
To make 36 high, add $204.
To make 24 deep, add $204.
Charges are cumulative.
Must purchase liner and blower unit separately.
1940 1940
Hood Surround Style A Hood Surround Style A
AA
F
HOODSURROUNDSTYLE A Fax Print For Quote
S Wainscot frontS Corbels with 3/4 shelf above; mustspecify corbel type
S Open storage inside legs
S Modify this design idea by mixingand matching the features to meetyour needs; fax print withdimensions to factory for quote
B
D
CE G
IS36 March 1, 2007
All Hoods available in IDC.Construction and pricing is Traditional and Elite.
HOODS1941 1941
Hood Surround Style B Hood Surround Style B
A
F
HOODSURROUNDSTYLE B Fax Print For Quote
S Wainscot front top areaS Corbels with small crown and 3/4shelf above; must specify corbel type
S Pull Out units bottom left/right
S Modify this design idea by mixing andmatching the features to meet yourneeds; fax print with dimensions tofactory for quote
GG
F
B
D
CE
1942 1942
Hood Surround Style C Hood Surround Style C
GA
F
HOODSURROUNDSTYLE C Fax Print For Quote
S Wainscot front top area
S Corbels with small crown and 3/4shelf above; must specify corbel type
S Adjustable shelf storage behind doorsbottom left/right
S Cabinet step back area at bottom
S Modify this design idea by mixing andmatching the features to meet yourneeds; fax print with dimensions tofactory for quote
H
F
B
D
CE
1950 1950
Metal Liner Metal Liner
S Designed for use in all woodh d t th ll t fl
Trad. Eliteghoods except the wall mount flarehood
18 1/425 1/2 31 1/2
ML30 $ 126 $ 126hoodS Not required for Vent Hood4 3/8
25 1/2 , 31 1/2ML36 126 126q
S Liners are supplied by Hoffco,Inc.; the cutouts will accept onlytheir blower units
S Liners are designed for ourcabinets only and must be orderedfrom Holiday Kitchens
4 /8
Add to price of hood.
IS37March 1, 2007
All Hoods available in IDC.Construction and pricing is Traditional and Elite.
HOODS1960 1960
Hood Blower Units Hood Blower Units
S Brand: Hoffco S Both units are Almond finish Trad. EliteBrand: Hoffco
S HC200: 230 cfm blower unit with two
Both units are Almond finishS Ductless conversion kit available for HC200 $ 350 $ 350S HC200: 230 cfm blower unit with two
speed axial fan and light, includesS Ductless conversion kit available forboth units HC200DCK 165 165speed axial fan and light, includes
damperboth units
S Factory does not install blower units HC300 915 915damper
S HC200DCK: Ductless conversion kitS Factory does not install blower unitsS For additional blower units not listed
HC300DCK 193 193S HC200DCK: Ductless conversion kitfor HC200
S HC300: 360 cfm variable speedblower and light, includes damper
S HC300DCK: Ductless conversion kitfor HC300
S Both of the above must be used withour metal liner -- See Section 1950
S For additional blower units not listedhere, contact the factory direct for thedealer nearest you at:Hoffco, Inc.P.O. Box 248North State Hwy 274Wood Lake, MN 56297Phone: 507-485-3131www.hoffcoinc.com
Add to price of hood.
1970 1970
Vent-A-Hood Blower/Liner Units Vent-A-Hood Blower/Liner Units
S Brand: Vent-A-HoodS VAH300: 300 cfm motor with a
S Heavy cooking is defined as 3-4burners frequently in use, canning,
k ki iddl / ill i
GraphiteGray List
StainlessSteel ListVAH300: 300 cfm motor with a
centrifugal squirrel cage blower andtwo 50 watt halogen lights;
d d f li ht t d t l
q y , g,wok cooking, griddles/grills incooktop, and frying; any high BTUoutput commercial style appliance is
BH128SLDVAH300 $ 1328 $ 1632g g ;
recommended for light to moderatelyheavy cooking on electric or lightcooking on gas appliances fits 30
output, commercial style appliance isconsidered heavy cookingB th it Whit fi i h
BH134SLDVAH300 1328 1632
cooking on gas appliances - fits 30hoods and greater
S VAH600: two 300 cfm motors (600
S Both units are White finishS Does not need a separate liner
BH234SLDVAH300/600 1952 2232
S VAH600: two 300 cfm motors (600cfm total) with two centrifugal squirrelcage blowers and two 50 watt
Does not need a separate linerS Factory does not install blower units BH234PSLD
VAH300/600 1952 2232cage blowers and two 50 watthalogen lights; recommended forheavy cooking on electric or
BH240PSLDVAH300/600 2116 2388heavy cooking on electric or
moderately heavy to heavy cookingon gas appliances - fits 36 hoods
Add to price of hood.
Vent-A-Hood Blower/Liners Cross Reference x = standard liner * = can accommodateBH128SLDVAH300
BH134SLDVAH300
BH234SLDVAH300/600
BH234PSLDVAH300/600
BH240PSLDVAH300/600
HOODA30
HOODA36
HOODB30 xHOODB36 * x xHOODB36P * * * xHOODB42P * * * * xHOODC33 xHOODC39 * x xHOODC39P * * * xHOODC45P * * * * xHOODD33 xHOODD39 * x xHOODD39P * * * xHOODD45P * * * * xHOODE3036 xHOODE3636 * x xHOODE3636P * * * xHOODE4236P * * * * xHOODF3039 xHOODF3639 * x xHOODF3639P * * * xHOODF4239P * * * * xWHWCP45 * * xWHWCP51 * * xWHWC57 * * x
IS38 March 1, 2007
All Hoods available in IDC.Construction and pricing is Traditional and Elite.
BASE CABINETS
2000 2000
Standard Base Standard Base
Drs-DrwrFronts Mel Ply
24 B9 1-1 $ 479 $ 581B12 1-1 493 600
6 B14 1-1 513 6266B15 1-1 527 642B16 1-1 540 658B18 1-1 563 689
24 B20 1-1 591 723
24 B21 1-1 612 75024B22 1-1 644 789
6B24 2-1 675 831
6B26 2-1 706 869B27 2-1 727 893B28 2-1 780 959
24 B30 2-2 929 1128
O dj t bl f ll d th h lf
24B32 2-2 933 1133
S One adjustable full depth shelf B33 2-2 938 1138j p
S 9 wide does not have a shelf B34 2-2 947 11509 wide does not have a shelf
S 24 - 28 wide have one drawer B35 2-2 962 1168S 24 - 28 wide have one drawer
S Cabinets over 39 wide have verticalB36 2-2 978 1188
S Cabinets over 39 wide have verticaldivider installed (price is included) and
B38 2-2 1000 1216divider installed (price is included) andsplit shelves
B39 2-2 1005 1221split shelves
D bl d b bi t tB40 2-2 1014 1234
S Double drawer base cabinets musthave top rail attached to countertop in
B42 2-2 1052 1281have top rail attached to countertop incenter of cabinet
Finished End veneer 86 86center of cabinet
F 3 3 li d lFinished End HPL 45 45
S For 3 x 3 clipped corner see catalog#2555
For each ROSDOD, add: 171 171#2555 For each ROSTBOX, add: 221 221
2010 2010
Base Full Height 24 Deep Base Full Height 24 Deep
Drs-DrwrFronts Mel Ply
BFH9 1-0 $ 325 $ 428BFH12 1-0 340 445BFH14 1-0 358 472
24 BFH15 1-0 373 48924BFH16 1-0 386 505BFH18 1-0 411 536BFH20 1-0 438 572BFH21 1-0 460 597BFH22 1-0 491 637
30 BFH24 2-0 523 67630BFH26 2-0 554 717BFH27 2-0 574 740BFH28 2-0 626 806BFH30 2-0 622 819BFH32 2-0 627 826BFH33 2-0 632 832
S Two adjustable full depth shelves BFH34 2-0 641 842S Two adjustable full depth shelves
S 9 wide does not have shelvesBFH35 2-0 656 862
S 9 wide does not have shelves BFH36 2-0 672 882S Cabinets over 39 wide have verticaldi id i t ll d ( i i i l d d) d
BFH38 2-0 693 909divider installed (price is included) andlit h l
BFH39 2-0 698 914(p )split shelves BFH40 2-0 707 928
S For 3 x 3 clipped corner see catalog BFH42 2-0 747 975For 3 x 3 clipped corner see catalog#2555 Finished End veneer 86 86
Finished End HPL 45 45For each ROSDOD, add: 171 171For each ROSTBOX, add: 221 221
IS39March 1, 2007
BASE CABINETS2020 2020
Base Full Height Wall 12 Deep Base Full Height Wall 12 Deep
Drs-DrwrFronts Mel Ply
BFHW9 1-0 $ 325 $ 428
BFHW12 1-0 340 445
12 BFHW14 1-0 358 47212BFHW15 1-0 373 489
BFHW16 1-0 386 505
BFHW18 1-0 411 536
BFHW20 1-0 438 57230 BFHW21 1-0 460 597
BFHW22 1-0 491 637
BFHW24 2-0 523 676
BFHW26 2-0 554 717
BFHW27 2-0 574 740
BFHW28 2-0 626 806
BFHW30 2-0 622 819
BFHW32 2-0 627 826
S Two adjustable full depth shelves BFHW33 2-0 632 832S Two adjustable full depth shelves
S 9 wide does not have shelves BFHW34 2-0 641 843S 9 wide does not have shelves
S Cabinets over 39 wide have vertical BFHW35 2-0 656 862S Cabinets over 39 wide have verticaldivider installed (price is included) and BFHW36 2-0 672 882divider installed (price is included) andsplit shelves BFHW38 2-0 693 909p
S For 3 x 3 clipped corner see catalog#2555
BFHW39 2-0 698 914pp g#2555 BFHW40 2-0 707 928
BFHW42 2-0 747 975
Finished End veneer 63 63
Finished End HPL 32 32
2023 2023
Base Full Height With Pull Out Base Full Height With Pull Out
Drs-DrwrFronts Mel Ply
BFH9WPS 1-0 $ 1180 $ 1281
BFH12WPS 1-0 1325 1431
Finished End veneer 86 86
24 Finished End HPL 45 45
30
S Specify left or right access
S Chrome pull out with three adjustablebaskets
S Door is attached to pull out
S Hafele item
IS40 March 1, 2007
BASE CABINETS2024 2024
Base Full Height Angled With Pull Out Base Full Height Angled With Pull Out
Drs-DrwrFronts Mel Ply
BFH12WPSD 1-0 $ 1288 $ 1401
12 3/4Finished End veneer 63 63
24 12 3/423 1/4
Finished End HPL 32 32
30
12
23 1/4
S Cabinet has full top
S 45_ angle left or right; must specify
S Recommend finished end on adjacentcabinet
S Access is from short side
S Angled chrome pull out with threeadjustable baskets
S Door is attached to pull out
S Hafele item
2025 2025
Narrow Base Full Height With Assorted Pull Outs Narrow Base Full Height WithAssorted Pull Outs
S BFH6WPS:shelf over shelf, chrome pull out with6
Drs-DrwrFronts Mel Plyshelf over shelf, chrome pull out with
separators to securely store tall bottles24 BFH6WPS 1-0 $ 1154 $ 1256S BFH6WPT:dual towel bar over shelf chrome pull out
24
BFH6WPT 1-0 1125 1228dual towel bar over shelf, chrome pull out
S BFH6WPTR:BFH6WPTR 1-0 1091 1193
S BFH6WPTR:tray holder, chrome pull out Finished End veneer 86 86tray holder, chrome pull out
S Accessible from both sides30 Finished End HPL 45 45S Accessible from both sides
S Door is attached to pull out
30
Loose AccessoriesS Door is attached to pull out
S Hafele items WPS6 shelf over shelf 792 792S Hafele items
S Available as loose accessories;minimum opening for all is WPT6
towel barover shelf 767 767minimum opening for all is
4 1/2 w x 22 7/8 h x 19 d WPTR6 tray holder 733 733/2 /8 9 d
S Slab door only
2026 2026
Narrow Base Full Height Angled With Pull Out Narrow Base Full HeightAngled With Pull Out
S Cabinet has full top
S 45_ angle left or right; must specify246 3/4
Drs-DrwrFronts Mel Ply
S 45_ angle left or right; must specify
S Recommend finished end on adjacent24
6 /4
23 1/BFH6WPSD 1-0 $ 1295 $ 1396
S Recommend finished end on adjacentcabinet
23 1/4 Finished End veneer 86 86cabinet
S Shelf over shelf angled chrome pull out with30 Finished End HPL 45 45S Shelf over shelf angled chrome pull out withseparators to securely store tall bottles
30Loose Accessory
S Accessible from both sides
S Door is attached to pull out WPSD6angled shelfover shelf 829 829S Door is attached to pull out
S Hafele item
S Available as a loose accessory;minimum opening is4 1/2 w x 22 7/8 h x 19 1/2 d
18
IS41March 1, 2007
BASE CABINETS2030 2030
Three Drawer Base Three Drawer Base
Drs-DrwrFronts Mel Ply
BDT12 0-3 $ 1020 $ 1217
24 BDT15 0-3 1038 1240
BDT18 0-3 1045 1250
6 BDT21 0-3 1091 13086BDT24 0-3 1118 1343
12 BDT27 0-3 1145 137512BDT30 0-3 1203 1450
S Standard with cross rail between all BDT33 0-3 1241 1499S Standard with cross rail between alldrawers12 BDT36 0-3 1280 1546drawers
S For 3 x 3 clipped corner see #2555 BDT42* 0-3 1392 1670S For 3 x 3 clipped corner see #2555
S 42 and 48 wide are standard with BDT48* 0-3 1504 1793S 42 and 48 wide are standard with1/2 drawer bottoms and 3/4 thick Finished End veneer 86 86/2 drawer bottoms and /4 thickcabinet back Finished End HPL 45 45
* 1/2 drawer bottoms and 3/4 thick cabinet back.
2040 2040
Four Drawer Base Four Drawer Base
Drs-DrwrFronts Mel Ply
24 BD12 0-4 $ 1218 $ 144724BD15 0-4 1248 1482
6BD18 0-4 1251 1487
6 BD21 0-4 1300 1548
S Specify for deep drawer at top with6 BD24 0-4 1326 1582S Specify for deep drawer at top withthree other drawers below; no change6
6BD27 0-4 1351 1612three other drawers below; no change
drawer arrangement charge when6
BD30 0-4 1415 1692drawer arrangement charge whenopenings are standard
12 BD33 0-4 1450 1739S Standard with cross rail between alldra ers
12BD36 0-4 1487 1785
drawers
F 3 3 li d #2555BD42* 0-4 1599 1908
S For 3 x 3 clipped corner see #2555 BD48* 0-4 1711 2033S 42 and 48 wide are standard with
1/ drawer bottoms and 3/ thickFinished End veneer 86 86
1/2 drawer bottoms and 3/4 thickcabinet back Finished End HPL 45 45cabinet back
* 1/2 drawer bottoms and 3/4 thick cabinet back.
2045 2045
Five Drawer Base Five Drawer Base
24
Drs-DrwrFronts Mel Ply
24BDX12 0-5 $ 1429 $ 1688
BDX15 0-5 1459 17256 BDX18 0-5 1463 1731
6 BDX21 0-5 1512 17926
6 BDX24 0-5 1537 18256
6BDX27 0-5 1563 1857
6BDX30 0-5 1625 1935
S Standard with cross rail between alld
6 BDX33 0-5 1661 1981drawers
F 3 3 li d #2555BDX36 0-5 1698 2027
S For 3 x 3 clipped corner see #2555 Finished End veneer 86 86
Finished End HPL 45 45
IS42 March 1, 2007
BASE CABINETS2050 2050
Base Angled Base Angled
67 1/2_Drs-DrwrFronts Mel Ply
23 11/16 18 3/16 doorwidths
BA24 2-0 $ 700 $ 88424
135_widths
Finished End veneer 86 86
Finished End HPL 45 45
S Two fixed full depth shelves
S Cabinet has full top
S Recommend adjacent cabinet havefinished end
S 3/4 backs
2055 2055
Angled Base Angled Base
23 1/4 Drs-DrwrFronts Mel Ply
AB24 2-0 $ 700 $ 884
24Finished End veneer 86 86
2423 1/4 Finished End HPL 45 45
S Two adjustable full depth shelves
S Cabinet has full top
S Recommend adjacent cabinet havefinished ends
S 3/4 backs
S Cabinet is 24 with accent strips
23 /4Add for required accent strips, see catalog#3010.
2060 2060
Base Pantry Base Pantry
S No shelves
S Breadboard behind drawer front24
Drs-DrwrFronts Mel PlyS Breadboard behind drawer front
unless specified, no charge24
BP30 2-3 $ 1402 $ 1702p , g
S Breadboard on left standard unlessspecified right side no charge12
BP36 2-3 1459 1772specified right side, no charge
S Deep drawer on right standard unless
12Finished End veneer 86 86
S Deep drawer on right standard unlessspecified left side, no charge Finished End HPL 45 45specified left side, no charge
S Use appropriate wood conditioner onbreadboard periodically
S Double drawer base cabinets musthave top rail attached to countertop incenter of cabinet
18
6
6
IS43March 1, 2007
BASE CABINETS2070 2070
Chef’s Base Pantry Chef’s Base Pantry
Drs-DrwrFronts Mel Ply
CBP36 2-0 $ 1581 $ 1997
Finished End veneer 86 86
Finished End HPL 45 45
S Cabinet has full top
S Use 3 filler when next to walls
S Do not use next to appliances that willrestrict the door operation
S Two adjustable shelves in back onboth sides
S One adjustable spice rack on eachdoor
S Two swing-out racks with fixedshelves
2080 2080
Blind Corner Base Blind Corner Base
Drs-DrwrFronts Mel Ply
BCB36 1-1 $ 763 $ 941
BCB39 1-1 787 972
BCB42 1-1 833 1026
Accent Strip10mm gap BCB45 1-1 892 110427
p
BCB48 1-1 923 1140
24 Finished End veneer 86 8624Finished End HPL 45 45
S See IDC cabinet details section fordetailed installation print
S Does not need to be pulled
S 3 or 6 accent strip sent loose,please specify
S 6 accent strip allows for 3 pull
S Specify blind left or right,blind left shown
S Blind closed off to within 10mm with3/4 material
S Door hinged on blind side unlessspecified
S One adjustable shelf, full depth andnotched around hinge stile
Add for required accent strip, see catalog#3010.
IS44 March 1, 2007
BASE CABINETS2090 2090
Peninsula Corner Base Peninsula Corner Base
27 Drs-DrwrFronts Mel Ply
24 PCB27 2-1 $ 963 $ 119324
PCBD27 0-4 1588 1913
PCBDT27 0-3 1386 1677
Finished End veneer 86 86
Finished End HPL 45 45
S See IDC cabinet details section fordetailed installation print
S Includes flush finished back
S 4 accent strip sent loose
S Can fir out 3/4 for 24 3/4 depth,please specify, no charge
Accent StripBase Filler
Add for required accent strip, see catalog#3010.
2100 2100
Blind Corner Base Special Blind Corner Base Special
24
Drs-DrwrFronts Mel Ply
24BCBS48 1-1 $ 1562 $ 1919
Finished End veneer 86 86
A S i10mm gapFinished End HPL 45 45
27Accent Strip10mm gap
Change Rollouts to Tandembox27
Gray, add: 101
Stainless Steel, add: 318
S See IDC cabinet details section fordetailed installation prints
S Does not need to be pulled
S 3 or 6 accent strip sent loose,please specify
S 6 accent strip allows for 3 pull
S Specify blind left or right,blind left shown
S Blind closed off to within 10mm with3/4 material
S Door hinged on blind side
S Includes two Dodd’s rollouts in blindand custom swing-out rack
S If Tandembox ROS, upcharge applies
Add for required accent strip, see catalog#3010.
IS45March 1, 2007
BASE CABINETS2105 2105
Blind Corner Base Full Height With Magic Corner Blind Corner Base Full HeightWith Magic Corner
Drs-DrwrFronts Mel Ply
BCB45MAG 1-0 $ 2842 $ 3053
3Finished End veneer 86 86
17 3/815 3/8 x 18 1/2 Finished End HPL 45 45
S See IDC cabinet details section fordetailed installation prints
S Specify blind left or right
S Does not need to be pulled
S 3 or 6 accent strip sent loose,please specify
S 6 accent strip allows for 3 pull
S Blind closed off to within 10mm with3/4 material
S Door is attached to pull out
S Chrome pull out with two baskets onthe door and two baskets in the blindarea
S Door is pulled straight out to end stopand swiveled horizontally drawing theblind area baskets to the opening
S Will fit in a 21 deep cabinet
S Hafele item
2445
30
27Accent Strip
10mm gap
80_
50_21 5/8
17 7/8
Approximately27 7/8
8 2
15 3/8 x 18 1/213 3/8 x 18 1/2
Add for required accent strip, see catalog#3010.
2110 2110
Square Corner Revolving Square Corner Revolving
31Laminate
Drs-DrwrFronts Mel Ply
31SCR36 2-0 $ 1087 N/AVeneer
SCR36V 2-0 1412 $ 1552
C bi t h f ll t30HPL
S Cabinet has full top
N difi ti
30SCR36H 2-0 1365 1552
S No modifications
S Code reflects entire unit construction;both ends finished automatically
S Doors will have #850 profile (squareedges) except for mitered19 7/8
IS46 March 1, 2007
BASE CABINETS2120 2120
Square Corner Base Square Corner Base
S One fixed shelfBl Bi F ld 36
Drs-DrwrFronts Mel Ply
S One fixed shelf
S Cabinet has full topBlum Bi-Fold 36
39hinged
tSCB36 2-0 $ 833 $ 1051S Cabinet has full top
S Use five leveling legs when installing3942
gseparate
SCB39 2-0 931 1177S Use five leveling legs when installing
S 36 wide standard with the Blum2427
SCB42 2-0 1004 126836 wide standard with the BlumBi-Fold hinge, specify hinged left orright; wood doors only specify for33 15/
2730 Finished End veneer 86 86
right; wood doors only specify forstraight piano hinged, no charge;
33 15/1630
Finished End HPL 45 45straight piano hinged, no charge;specify hinged left or right
S 39 and 42 wide standard with doorshinged separately with 170_ hinge
S No guarantee on 39 and 42cabinets with piano hinged or BlumBi-Fold hinged doors24
30
2121 2121
Square Corner Base With Susans Square Corner Base With Susans
S Wood Susans: one susan on fixedshelf, one susan on cabinet floor36Blum Bi Fold
Drs-DrwrFronts Mel Plyshelf, one susan on cabinet floor
S Cabinet has full top3639
Blum Bi-Foldhingedseparate SCB36SS 2-0 $ 1464 $ 1682Cabinet has full top
S Use five leveling legs when installing3942
separateSCB39SS 2-0 1562 1808g g g
S 36 wide standard with the BlumBi-Fold hinge specify hinged left or
2427
SCB42SS 2-0 1635 1899Bi-Fold hinge, specify hinged left orright; wood doors only specify for
33 15/
2730 Finished End veneer 86 86right; wood doors only specify for
straight piano hinged, no charge;specify hinged left or right
33 15/1630
Finished End HPL 45 45specify hinged left or right
S 39 and 42 wide standard with doorshinged separately with 170_ hinge
S No guarantee on 39 and 42cabinets with piano hinged or BlumBi-Fold hinged doors
S No custom susans24
30
2123 2123
Square Corner Base With Three Drawers Square Corner Base With Three Drawers
36 , 39 , 42Drs-DrwrFronts Mel Ply
24 27 30
36 , 39 , 42
SCBDT36 0-3 $ 1769 $ 197824 , 27 , 30
SCBDT39 0-3 1863 209833 15/16 SCBDT42 0-3 1933 2185
30 Finished End veneer 86 86
Finished End HPL 45 45
S Drawer fronts will have a back bevel
S Tandembox drawers not available
S #275, #400 & #525 edge not available
24
IS47March 1, 2007
BASE CABINETS2124 2124
Square Corner Base With Four Drawers Square Corner Base With Four Drawers
36 , 39 , 42
Drs-DrwrFronts Mel Ply36 , 39 , 42
24 27 30SCBD36 0-4 $ 2025 $ 2234
24 , 27 , 30 SCBD39 0-4 2119 2354
33 15/16 SCBD42 0-4 2189 244133 /16
30 Finished End veneer 86 8630Finished End HPL 45 45
S Drawer fronts will have a back bevel
S Tandembox drawers not available
S #275, #400 & #525 edge not available24
2130 2130
Diagonal Base Corner Diagonal Base Corner
Top3639
Drs-DrwrFronts Mel PlyTop
Side3942 DBC36 1-1 $ 1048 $ 1299
S One fixed shelfDoor24
27DBC39 1-1 1150 1426
S One fixed shelf
S Cabinet has full top
Door2730 DBC42 2-1 1220 1516
S Cabinet has full top
S Use five leveling legs when installing33 15/16
30Finished End veneer 86 86
S Use five leveling legs when installing
S Door and drawer front are set back to30 Finished End HPL 45 45S Door and drawer front are set back tocreate flush fronts; if no cabinet on aside, you will be able to see intocabinet
S Use hinge stiles to close off view intocabinet, has short shelf
S 15 15/16 opening, 15 13/16 door width
S 20 3/16 opening, 20 1/16 door width
S 24 1/2 opening, 24 3/8 door width
24
1721 1/425 7/16
For hinge stiles and short shelf, add $83.
2131 2131
Diagonal Base Corner With Susans Diagonal Base Corner With Susans
36 , 39 , 42Drs-DrwrFronts Mel Ply
24
36 , 39 , 42
DBC36SS 1-1 $ 1679 $ 1930
S Wood Susans: one susan on fixedf f
2730
DBC39SS 1-1 1781 2057Wood Susans: one susan on fixedshelf, one susan on cabinet floor
C bi t h f ll t33 15/16
30DBC42SS 2-1 1851 2147
S Cabinet has full top
Use five leveling legs when installing30 Finished End veneer 86 86
S Use five leveling legs when installing
S Door and drawer front are set back to
30
Finished End HPL 45 45S Door and drawer front are set back tocreate flush fronts; if no cabinet on aside, you will be able to see intocabinet
S 15 15/16 opening, 15 13/16 door width
S 20 3/16 opening, 20 1/16 door width
S 24 1/2 opening, 24 3/8 door width
S No custom susans
S Not available with hinge stiles
241721 1/425 7/16
IS48 March 1, 2007
BASE CABINETS2132 2132
Diagonal Base Corner Full Height Diagonal Base Corner Full Height
36 , 39 , 42Drs-DrwrFronts Mel Ply
24
36 , 39 , 42
DBCFH36 1-0 $ 895 $ 11452730
DBCFH39 1-0 995 1274
33 15/1630
DBCFH42 2-0 1067 1363
30
16
Finished End veneer 86 8630
Finished End HPL 45 45
S One fixed shelf (centeredin cabinet)
S Cabinet has full top
S Use five leveling legs wheninstalling
S Door is set back to create flushfronts; if no cabinet on a side,you will be able to see intocabinet
S Use hinge stiles to close off viewinto cabinet, has short shelf
S 15 15/16 opening, 15 13/16door width
S 20 3/16 opening, 20 1/16door width
S 24 1/2 opening, 24 3/8 door width
24
1721 1/425 7/16
Door
TopSide
For hinge stiles and short shelf, add $83.
2133 2133
Diagonal Base Corner Full Height With Susans Diagonal Base CornerFull Height With Susans
36 , 39 , 42 Drs-DrwrFronts Mel Ply
2427
DBCFH36SS 1-0 $ 1526 $ 1776
33 15/
2730 DBCFH39SS 1-0 1626 1905
33 15/1630
DBCFH42SS 2-0 1698 1994
30 Finished End veneer 86 86
Finished End HPL 45 45
S Wood Susans: one susan on fixedshelf (centered in cabinet), one susanon cabinet floor
S Cabinet has full top
S Use five leveling legs when installing
S Door is set back to create flush fronts;if no cabinets on a side, you will beable to see into cabinet
S 15 15/16 opening, 15 13/16 door width
S 20 3/16 opening, 20 1/16 door width
S 24 1/2 opening, 24 3/8 door width
S No custom susans
S Not available with hinge stiles
1721 1/425 7/16
24
IS49March 1, 2007
BASE CABINETS2135 2135
Base With Warming Drawer/Micro Opening Base With WarmingDrawer/Micro Opening
24
Drs-DrwrFronts Mel Ply
24BW24 2-0 $ 533 $ 674
SpecifyBW27 2-0 605 763
SpecifyFinished End veneer 86 86
Finished End HPL 45 45
Specify Loose PanelSpecify
Laminate N/C N/C
HPL N/C N/C
Foil Wrapped 231 231
S Top of doors do not line up withHigh Gloss Foil Wrapped 296 296
S Top of doors do not line up withstandard base doors Wood Frame N/C N/Cstandard base doors
S Specify cutout dimensions and add Cutout Panels: Raw Inside EdgeSpecify cutout dimensions and addcharges for factory cutout ICUT 80 80
S 3/4 panel or wood frame shippedloose unless specified
Cutout Panels: Banded Inside Edgeloose unless specified
S Opening configuration height must beICUTB 159 159
S Opening configuration height must bespecified
2137 2137
Base Drawers With Warming Drawer/Micro Opening Base Drawers With WarmingDrawer/Micro Opening
24
Drs-DrwrFronts Mel Ply
24BWD24 0-2 $ 997 $ 1213
SpecifyBWD27 0-2 1025 1248
SpecifyFinished End veneer 86 86
SpecifyFinished End HPL 45 45
SpecifyLoose Panel
Specify Laminate N/C N/C
S Drawers do not line up with standard
SpecifyHPL N/C N/C
S Drawers do not line up with standardbase drawers Foil Wrapped 231 231base drawers
S Specify cutout dimensions and add High Gloss Foil Wrapped 296 296S Specify cutout dimensions and addcharges for factory cutout Wood Frame N/C N/Cg y
S 3/4 panel or wood frame shippedl l ifi d
Cutout Panels: Raw Inside Edge4 p pploose unless specified
If d h i ht t ifi dICUT 80 80
S If drawer heights are not specified,two equal height drawers will be Cutout Panels: Banded Inside Edgetwo equal height drawers will beinstalled ICUTB 159 159installed
S Standard with cross rail between alldrawers
IS50 March 1, 2007
BASE CABINETS2140 2140
Range Front Range Front
4 Mel Ply4RF30 laminate $ 118 N/A
RF36 laminate 142 N/A
RF30V veneer 147 $ 163
RF36V veneer 175 211
SpecifyS 16 high standard unless specified
1
SpecifyRF30H HPL 142 163
S Height specified includes 4 1/2 toe4 1/
RF36H HPL 169 211S Code reflects front material only4 1/2
2150 2150
Range Front Drawer Range Front Drawer
Drs-DrwrFronts Mel Ply
RFD24 0-1 $ 454 $ 550
RFD30 0-1 475 577
RFD36 0-1 496 604
SpecifyFinished End veneer 86 86
SpecifyFinished End HPL 45 45
S 16 high standard unless specified
S Height specified includes 4 1/2 toe
S Heights available: 9 - 16
S Drawer can be offset for JennAir, nocharge
4 1/2
>16 up to 20 high, add 20%.
2160 2160
Drop In Range Cabinet Drop In Range Cabinet
Drs-DrwrFronts Mel Ply
24 RC33 0-1 $ 693 $ 851
RC36 0-1 729 898
Finished End veneer 86 86Specify Finished End HPL 45 45
Specify Loose Panel
Specify5 minimum for working drawer
Specify
Laminate N/C N/Cp y5 minimum for working drawer
HPL N/C N/C
Foil Wrapped 231 231S Specify cutout dimensions and addcharges for factory cutout
High Gloss Foil Wrapped 296 296charges for factory cutout
S 3/4 panel or wood frame shipped loose Wood Frame N/C N/CS 3/4 panel or wood frame shipped looseunless specified Cutout Panels: Raw Inside Edgeunless specified
S Maximum opening height with drawer24 5/
ICUT 80 80p g g24 5/8Specify for no drawer
Cutout Panels: Banded Inside EdgeS Specify for no drawer
S Fixed floor above drawerICUTB 159 159
S Fixed floor above drawer
S 3/4 backIf no drawer, deduct $74.
IS51March 1, 2007
BASE CABINETS2170 2170
Range/Sink Base Range/Sink Base
Drs-DrwrFronts Mel Ply
SB12 1-1 $ 472 $ 595
SB15 1-1 481 607
SB18 1-1 488 616
SB21 1-1 495 62424 SB24 2-1 504 635
SB27 2-1 555 699
SB30 2-1 581 734
SB32 2-1 590 746
30 SB33 2-1 595 752
SB34 2-1 603 760
SB35 2-1 606 764
SB36 2-1 609 769
SB38 2-1 638 805
SB39 2-1 643 812
S No shelf SB40 2-1 651 821S No shelf
S Sink bases over 42 wide have full SB42 2-1 678 856S Sink bases over 42 wide have fullheight stile, split bottom front rail, and3
Finished End veneer 86 86height stile, split bottom front rail, and3/4 thick back; upcharge applies Finished End HPL 45 45
S For sink matting see catalog #3100 For tilt-outs to 42 , add: 66 66
For each ROSDOD, add: 171 171
For each ROSTBOX, add: 221 221
For full height doors and6 sink apron, add: 96 119
2172 2172
Farm Sink Base Farm Sink Base
24
Drs-DrwrFronts Mel Ply
24FSB36 2-0 $ 780 $ 963
SpecifyFinished End veneer 86 86
SpecifyFinished End HPL 45 45
For each ROSDOD, add: 171 171
Specify For each ROSTBOX, add: 221 221
S Must specify clearance above door
S Valance installed for job site cutout
S No shelf
Specify
IS52 March 1, 2007
BASE CABINETS2175 2175
Sink Base Clipped Corners Sink Base Clipped Corners
Cabinet EndDrs-DrwrFronts Mel Ply
SBCC36 2-1 $ 911 $ 1071Accent Strip Support SBCC39 2-1 945 1114
Hinge Stile 53.13_ SBCC42 2-1 980 1158Hinge StileFinished End veneer 86 86
Finished End HPL 45 45
S No shelf Accent Strip For tilt-outs to 42 , add: 66 66
S Cabinet has full top For each ROSDOD, add: 171 171p
S 3 x 3 clipped corner on each end For each ROSTBOX, add: 221 221pp
S 3 x 3 clipped corners do not followexact 45_ angle due to construction;th t 53 13_ ( i t)
For full height doors and6 sink apron, add: 96 119g ;
they are at 53.13_ (see print)
S Cabinet depth remains 24If vertical dividers arerequired, add for each: 96 119Cabinet depth remains 24
S Cabinets with rollouts get verticaldivider left and right, add for each
Add for required accent strips, see catalog #3010.
2180 2180
Sink Base Drawers Sink Base Drawers
Drs-DrwrFronts Mel Ply
24 SBD27 2-1 $ 727 $ 89324
SBD30 2-2 929 1128
SBD32 2-2 933 1133
SBD33 2-2 938 1138
24 SBD34 2-2 947 115024SBD35 2-2 962 1168
SBD36 2-2 978 1188
Fi d Fl6 SBD38 2-2 1000 1216
S 27 wide has full width drawerFixed Floor SBD39 2-2 1005 1221S 27 wide has full width drawer
S No shelf, fixed floor SBD40 2-2 1014 1234S No shelf, fixed floor
S Over 42 wide have 3/4 thick back; SBD42 2-2 1059 1291S Over 42 wide have /4 thick back;upcharge applies Finished End veneer 86 86p g pp
Finished End HPL 45 45
2190 2190
Sink Front Sink Front
4 1/4Drs-DrwrFronts Mel Ply/4
SF24 2-1 $ 323 $ 411
SF27 2-1 346 436
SF30 2-1 354 448
SF33 2-1 384 486
SF36 2-1 418 527
SF42 2-1 454 573
SFFLloosefloor 89 112
S No shelf For tilt-outs to 42 , add: 66 66S No shelf
S Floor shipped loose, if ordered
IS53March 1, 2007
BASE CABINETS2200 2200
Square Corner Sink Base Square Corner Sink Base
S No shelfDrs-DrwrFronts Mel Ply
S Cabinet has full topBlumBi F ld
36hinged SCS36 2-0 $ 753 $ 952p
S Use five leveling legs when installingBi-Fold363942
hingedseparate SCS39 2-0 792 1000g g g
S 36 wide standard with the BlumBi F ld hi if hi d l ft
42
24SCS42 2-0 832 1050
Bi-Fold hinge, specify hinged left orright; wood doors only specify for
2427
Finished End veneer 86 86right; wood doors only specify forstraight piano hinged, no charge;
2730
15Finished End HPL 45 45straight piano hinged, no charge;
specify hinged left or right
S 39 and 42 wide standard with doorshinged separately with 170_ hinge,right door to receive pull
S No guarantee on 39 and 42cabinets with piano hinged or BlumBi-Fold hinged doors
3033 15/16
24
30
2220 2220
Diagonal Sink Base Diagonal Sink Base
TopDrs-DrwrFronts Mel PlyTop
SideDSB36 1-1 $ 729 $ 922
S No shelfDoor 36
39DSB39 1-1 802 1012
S No shelfS No rail between door and drawer front
3942 DSB42 2-1 874 1102S No rail between door and drawer front
S Cabinet has full top422427
Finished End veneer 86 86pS Use five leveling legs when installingS Door and drawer front are set back to33 15/16
2730 Finished End HPL 45 45
S Door and drawer front are set back tocreate flush fronts; if no cabinet on a
30
33 15/1630
For tilt-out, add: 66 66create flush fronts; if no cabinet on aside, you will be able to see intocabinet
S Use hinge stiles to close off view intocabinet
S 42 wide has two doors, single drawerS 15 15/16 opening, 15 13/16 door widthS 20 3/16 opening, 20 1/16 door widthS 24 1/2 opening, 24 3/8 door width
24
30
1721 1/425 7/16
For hinge stiles, add $83.
2230 2230
Diagonal Sink Front Diagonal Sink Front
TopTop ViewDrs-DrwrFronts Mel PlyTop
Side135_
Top View(note doorplacement)
DSF36 1-1 $ 376 $ 473
Door135_
(placement)
DSF39 1-1 416 526
S No shelf DSF42 2-1 459 579S No shelfS No rail between door and drawer frontS Floor is shipped loose if ordered DSFFL
loosefloor 89 112
S Floor is shipped loose if orderedS Door and drawer front are set back to30 For tilt-out, add: 66 66S Door and drawer front are set back tocreate flush fronts; if no cabinet on aside, you will be able to see into cabinet
S Use hinge stiles to close off view intocabinet
S 42 wide has two doors, single drawerfront
30
4 1/4
For hinge stiles, add $83.
IS54 March 1, 2007
BASE CABINETS2240 2240
Recessed Diagonal Sink Recessed Diagonal Sink
17
30
3 1/2
Drs-DrwrFronts Mel Ply
17 3 1/2RDS42 2-1 $ 1087 $ 1372
Finished End veneer 86 86
Cabinet 30 7/16 Finished End HPL 45 45CabinetSide 42
30 /16
For tilt-out, add: 66 66
S No shelfS Cabinet has full topS Use five leveling legs when installingS Accent strips must be slab door style
7Door
AccentStrip
Top 7
24
22 7/8
Add for required accent strips, see catalog #3010.
2260 2260
Base Cook-N-Vent Base Cook-N-Vent
S Drawer depth is shallow (12 deep)
D t d d h i ht24
Drs-DrwrFronts Mel Ply
S Drawers are standard height; canspecify cutdown drawer height as
24BCV36 2-2 $ 1276 $ 1564specify cutdown drawer height as
follows:D dd’ D t il d if
Finished End veneer 86 86-- Dodd’s Dovetail order, specifycutdown drawer; CUTDWR Finished End HPL 45 45cutdown drawer; CUTDWRcharge appliesT d b d if M t b
CUTDWR 58 58g pp-- Tandembox order, specify Metaboxpencil drawer; available in whiteonly; CUTDWR charge applies
S One adjustable shelf
S False panel is set in dado and isremovable by applying pressure to thecenter of panel
S If changing the location of the falsepanel, state your measurement depthas inside front cabinet clearance
S Does accommodate a ThermadorCook-N-Vent
30
13 1/2
2270 2270
Square Corner Radius With Door Square Corner Radius With Door
3639
Drs-DrwrFronts Mel Ply39
42
24RSC36 1-0 $ 996 $ 1258
2427 Finished End veneer 86 86
S Fixed shelf
2730 Finished End HPL 45 45
S Fixed shelf
S 12 radius on cabinet front
S Wire or wood susans available,see #2700
S Cabinet has full top
S Use five leveling legs when installing
S Geneva, Munich, Harrisburg Arch,and Harrisburg square doors only
30
24
33 15/16 Use special radius door style charge.
IS55March 1, 2007
BASE CABINETS2280 2280
Base Angle Corner Shelf (Straight And Diagonal) Base Angle Corner Shelf(Straight And Diagonal)
24 24Straight Mel Ply
24 24BACS24 laminate $ 590 N/A
6 BACS24V veneer 771 $ 849
242430 BACS24H HPL 738 84124
Diagonal
6
BACS BACSD BACSD24 laminate 590 N/A
S Code reflects complete interior and6
BACSD24V veneer 771 849S Code reflects complete interior andexterior top and bottom; must specifyf fi i h d d h
BACSD24H HPL 738 841p ; p yfor finished ends, no charge
S Fixed shelves
S 3/4 backs
S Caps for leveling/toeboard legs arevisible; specify for no legs, no charge
30
2300 2300
Base Radius Tambour Base Radius Tambour
S Cabinet has full top12
Mel Plyp
S Two adjustable shelves12
24 BRT12 laminate $ 885 N/AS Specify curve left or right, curve rightshown
12 radius BRT12V veneer 1147 $ 1263shown
S Specify white melamine or natural30BRT12H HPL 1109 1263S Specify white melamine or natural
maple melamine or flat wood IDCtambour, or traditional wood tambour;if not specified, cabinets with wooddoors receive traditional woodtambour
S HPL tambours available - call forpricing
S Code reflects entire unit constructionand finished end on short side
S Operating door end of’s not availableon short side; decorative doorsavailable on short side with thru-holesdrilled in vertical divider
route for tambour(extends through back)
verticaldivider
30
12 3/4
Special color HPL tambour, add $124.
2310 2310
Base Radius Door Base Radius Door
12 3/4
Drs-DrwrFronts Mel Ply12 /4
24BRD12 1-0 $ 563 $ 714
Finished End veneer 86 86
S Cabinet has full top30
Finished End HPL 45 45S Cabinet has full top
S 12 inside radius on door
S Two adjustable shelves
S Specify curved left or right (curvedright shown)
S Geneva, Munich, Harrisburg Arch,and Harrisburg Square doors only
S Decorative doors and door end of’snot recommended on short side
30 Use special radius door style charge.
IS56 March 1, 2007
BASE CABINETS2320 2320
Base Half Round With Doors Base Half Round With Doors
Drs-DrwrFronts Mel Ply
BHRD24 2-0 $ 477 $ 603
S Cabinet has full top
S Two fixed shelves
S 12 inside radius on doors
S 25 1/2 width includes doors
S Geneva, Munich, Harrisburg Arch,and Harrisburg Square doors only
25 1/2Use special radius door style charges.
2330 2330
Base Transition Cabinet Base Transition Cabinet
1224
Drs-DrwrFronts Mel Ply
S Two full depth adjustable shelves1224
23 1/4 BTC12 1-0 $ 527 $ 666S Cabinet has full top
30Finished End veneer 86 86
S Recommend finished end on adjacentcabinet
30Finished End HPL 45 45
cabinet
S Door is set back to create flush fronts;if no cabinets on short side, you willbe able to see into cabinet
S Specify angled left or right, angledright shown; door always hinged onshort side
S 43_ angle on cabinets withoutdecorative doors; 45_ angle oncabinets with decorative doors
12
Top View
2340 2340
Base Transition Cabinet Base Transition Cabinet
Drs-DrwrFronts Mel Ply
BTC24 2-1 $ 1018 $ 1261
BTC30 2-1 1091 13552430
BTC36 3-1 1201 1494
24 3036 Finished End veneer 86 8636
Top View Finished End HPL 45 45
S One adjustable shelf
S Cabinet has full top
S Door is set back to create flush fronts;if no cabinet on short side, you will beable to see into cabinet
S Specify angled left or right(angled right shown)
S 43_ angle on cabinets withoutdecorative doors; 45_ angle oncabinets with decorative doors
30
12
IS57March 1, 2007
BASE CABINETS2370 2370
Base Spice Drawer Base Spice Drawer
Drs-DrwrFronts Mel Ply
BSD6 0-0 $ 939 $ 1146
Extend side back, add: 83 102
S 12 deep cabinet
S Cabinet has full top
S Dovetails on spice drawers areexposed as standard
S When extending sides back, spicedrawers do not get deeper
S Cabinet is finished interior, specifyfinished ends, no charge
2380 2380
Base Dishwasher Cabinet Base Dishwasher Cabinet
Drs-DrwrFronts Mel Ply
BDWR25 0-1 $ 727 $ 893
Finished End veneer 86 86
Finished End HPL 45 45
S 40 1/2 overall height
S Specify false drawer front height
S Fixed floor leaving 34 1/2 openingfor dishwasher
S 3/4 back
24 36
25 1/2
2395 2395
Base Wine Insert Cabinet Base Wine Insert Cabinet
Mel Ply
BWI6 laminate $ 500 N/A
BWI6V veneer 538 $ 660
BWI6H HPL 538 660
Extend side back, add: 83 102
S With 6 equal openings (4 1/2 w x 4 1/8 h)
S Open cabinet with finished interior
S 12 deep cabinet
S Must specify for finished ends no charge
Specify for any finished ends, no charge.
IS58 March 1, 2007
BASE CABINET MODIFICATIONS
2400 2400
Finished Interior Finished Interior
FININTBB2: interior beadboard back and standard Mel PlyFININTBB2: interior beadboard back and standardinterior sides finished FININTV veneer $ 275 $ 138
FININTH HPL 275 138
FININTBB2 beadboard 335 198
S Interior same as doors
S Specify for finished ends, no charge
S Rollouts will be specie and finish ofinterior; drawer boxes will not befinished same as interior unlessrequested
Add to price of cabinet.
2405 2405
Flush Finished Top Flush Finished Top
Mel Ply
FLTOPBV veneer $ 216 $ 238
FLTOPBH HPL 149 238
S No seams on full top of cabinet
Add to price of cabinet.
2440 2440
Flush Toe Flush Toe
IDC
FLTOE flush toe N/C
FLTOEC flush Corbel toe $ 224
S Leveling legs moved forward
S Visible gap between toeboard and cabinet
Flush Toe CorbelS Corbel toe will be flush with cabinet attachedbetween the sides below bottom, fixed panelattached 3 1/2 behind face
S 12 wide cabinet minimum for Corbel
S Sides will extend to floor, no legs
S Available on cabinet front only
S Not available on angled or clipped cornercabinets
Add to price of cabinet.
IS59March 1, 2007
BASE CABINET MODIFICATIONS2460 2460
Cutdown Drawer Cutdown Drawer
IDC
CUTDWR $ 58
S Usually used with cooktops
S Only available on Dodd’s Dovetail drawers;drawer box side height is 2 7/16
S For Tandembox order, use Metabox pencildrawer; CUTDWR charge applies
Add to price of cabinet.
2470 2470
Peninsula Base Peninsula Base
IDC
PENN $ 277
S Operating doors on both sides ofcabinet; false drawer fronts onback of cabinet
S Peninsula side door and drawerfronts will match front arrangementwith recess toe
S It is not recommended to use asingle IDC peninsula cabinet as anisland unit, this may lead tounacceptable stability; two or morecabinets bolted together offersgreater stability
Back ofCabinet
FrontofCabinet
Add to price of cabinet.Add for extra door and drawer front stylecharges.
2480 2480
Door End Of Base Door End Of Base
IDC
DEB $ 282
S Hinged on wall side
S Adds 3/4 to cabinet width
S 3/4 back
S Wider widths may require fixed shelves
S 24 deep with 3/16 gap is standard, canspecify 24 11/16 deep no charge
S Hinged on wall side
S Door is operational
S Built as full height door
S All door styles are available
S Foil doors have white backs
23 13/16 dStandard
24 11/16 dOptional
CabinetFront
Add to price of cabinet.Add door style charges.
IS60 March 1, 2007
BASE CABINET MODIFICATIONS2495 2495
Decorative Door Applied Base Decorative Door Applied Base
Finished End IDC
BDDAL laminate $ 182
CabinetBDDAV veneer 268
CabinetFront BDDAH HPL 227
S Decorative door attached to side ofcabinet, adds 3/4 to cabinet widthexcept clipped corners
S Door is not operational
S 24 deep with 3/16 gap is standard,can specify 24 11/16 deep no charge
S All door styles available
S Foil doors have white backs
23 13/16 dStandard
24 11/16 dOptional
FrontAdd to price of cabinet.
Includes finished end charges.
Add door style charges.
2500 2500
One Piece Units One Piece Units
IDC
SEAM $ 150
S Specify cabinets from left to right
S Can seam any number of cabinets
S Not recommended over 72 length
S Individual units attached at factorywith cabinet to cabinet screws
S Visible seam between units
S When seamed, IDC units areextremely heavy
Add totals of all cabinets seamed and oneseam charge.
2520 2520
Add Blind To Base Add Blind To Base
Mel Ply
24 BLIND $ 314 $ 383S See IDC cabinet details section forinstallation schematic
S Blind constructed with 3/4 material
S Specify blind left or blind right(blind right shown)
S Standard 27 blind
S 3 or 6 accent strip sent loose,please specify
S Does not need to be pulled
S 6 accent strip allows for 3 pull
S Door hinged on blind side unlessspecified
27
Add to price of cabinet.
Add for required accent strip, see catalog#3010.
IS61March 1, 2007
BASE CABINET MODIFICATIONS2530 2530
Door Modifications Door Modifications
IDCS CHGDOOR: change doorarrangement used when standard
CHGDOOR $ 67arrangement, used when standardopening configuration is modified or 170_ hinge upcharge per pair 10opening configuration is modified orthree doors on two door cabinet
S 3 stiles and rails available certaindoor styles only, see door style pages
If no doors on cabinet, deduct $60 list pernormal door.
Add to price of cabinet.
Add extra door style charges.
2540 2540
Base Pipe Chase Base Pipe Chase
ACUTOUTB Mel Ply
AACUTOUTB standard $ 170 $ 170
BCUTOUTBS special 293 293
S When ordering, furnish simple sketchand dimensions
S Sketch and dimensions shown are forillustration only
B
A B C
DAD
BC
B
CUTOUTBS
Add to price of cabinet.
2550 2550
Angled Front And/Or Sides Angled Front And/Or Sides
back IDC
22.5_ 45_side angled
sideANGLE
first22 1/2_ or 45_ $ 202
1212front
side
ANGLE2additional each22 1/2_ or 45_ 1501212
back ANGLESP special angle 356
125 side Mel Ply
angled
side If vertical divider isrequired, add: $ 96 $ 119
S 22 1/2_ angle right side (shown)
S Specify widest cabinet dimension
S Cabinet has full top
S If rollouts are ordered, add forrequired vertical divider on angledside
S Cabinets with angled front will havefull height doors or false drawer front,must specify on order
angledfront Add to price of cabinet.
Largest dimension indicates original cabinetcharge.
Add all other modification charges, asapplicable.
Add for accent strip if necessary, see catalog#3010.
IS62 March 1, 2007
BASE CABINET MODIFICATIONS2555 2555
3 x 3 Clipped Corner 3 x 3 Clipped Corner
Per Clip Mel Ply
ANGLECC $ 151 $ 151
S 3 x 3 clipped corners do notANGLECCVTDV 247 270
S 3 x 3 clipped corners do notfollow exact 45_ angle due toconstruction; they are at 53.13_(see print)
S Use ANGLECC charge forstandard clipped corner, no sidemounted items; useANGLECCVTDV charge whenside mounted items are used incabinet (e.g. rollouts, drawerstack, lift up ironing board)
S If decorative door is ordered,decorative doors will be built intocabinet dimension
CabinetEnd
Hinge Stile
Accent Strip
Accent Strip Support
53.13_
Add to price of cabinet.
Add for required accent strips, see catalog#3010.
Use angle charge (catalog #2550) for clipsother than 3 x 3 .
2560 2560
Oversize Cabinet Oversize Cabinet
SMel Ply
SpecifyAD1 up to 6 $ 185 $ 224
AD2 up to 12 271 331
AD3 up to 18 402 491
S Use for width modifications whenlarger cabinet is not available; use forall height and depth modifications
S Only one charge per cabinet
S Add all dimension changes to findappropriate charge
S Specify dimensions
S Drawer boxes and rollouts will beincreased to next available size;maximum Dodd’s with TandemPlusdepth is 21 ; maximum Tandemboxdepth is 22
Specify
Specify
Add to price of cabinet.
2570 2570
Base Cabinet Cutdown Base Cabinet Cutdown
Specify IDCSpecifyBCD N/C
S Start with the next largest standardsize cabinet and specify allappropriate cutdowns
S Cutdown in cabinet depth will result ina drawer depth of the next available3 increment (e.g. a B24 cut to 20deep will have drawers for an 18deep cabinet)
Specify
Specify
IS63March 1, 2007
BASE CABINET MODIFICATIONS2575 2575
Toe Modifications Toe Modifications
S if h i ht f t ll t b dIDC
S Specify height for taller toeboard
Ch ill l h i l l HPL hTOEMOD $ 86.00
S Charges will apply when special color HPL hasto be ordered for toeboard when toeboard color
Add to price of cabinet.to be ordered for toeboard when toeboard coloris different than finished ends
S When ordering modified toe depth specify
For each edgebandedend of toeboard 3.40
S When ordering modified toe depth, specifydepth of notch after 3/4 toeboard is applied For Toeboard Heightdepth of notch after /4 toeboard is applied
S When modifying the area height, specify overall >4 1/2 - 6 , per 8 12.00S When modifying the area height, specify overallcabinet height, for example:Base Cabinet with 6 high toe
>6 - 10 , per 8 23.00Base Cabinet with 6 high toeoverall height = 34 1/2box height = 28 1/2
S Adjustable leg system will not work with toeheight greater than 6 3/4
2580 2580
Base Shelf Modifications Base Shelf Modifications
Add One Set MetalShelf Standards Mel Ply
S Add adjustable metal shelf standards to ADJ24 1 adj shelf $ 55 $ 55S Add adjustable metal shelf standards tocabinet (surface mounted standards) ADJ30 2 adj shelves 72 72cabinet (surface mounted standards)
S When adding a fixed shelf to cabinet, Add One Fixed ShelfS When adding a fixed shelf to cabinet,specify placement FIXSH 96 119p y p
Add to price of cabinet.
2590 2590
Drawer Modifications Drawer Modifications
S IDC Tandembox drawers not available IDCIDC Tandembox drawers not availablewith mitered drawer fronts
S When ordering Dodd’s Dovetail drawers,Change drawer arrangementCDA $ 67When ordering Dodd s Dovetail drawers,
adjust drawer fronts by loosening screwsand then tightening again (this must be
Change drawer box to Tandembox N/Cand then tightening again (this must bedone before hardware is installed)
D bl d b bi t t h
Cumulative Custom Charges to ModifyDodd’s Dovetail (Per Drawer)
S Double drawer base cabinets must havetop rail attached to countertop in centerof cabinet
Cutdown drawer side heightCUTDWR 58
of cabinet
S For base unit used as cooktop onTandembox order, specify Metaboxpencil drawer; CUTDWR charge applies
Custom box depth withside-mount full extensionEXTDRWR 132
pencil drawer; CUTDWR charge applies
S Apply EXTDRWR charge when deeperdrawer with side mount full extension in
Custom side heightDWRCUS 58pp y g p
drawer with side-mount full extension inoversized base is ordered -- Dodd’s only
Mi i d th bi t f l t l D dd’
For 1/2 thick bottomDRWRBOT 29
S Minimum depth cabinet for lateral Dodd’sfile drawer is:Letter: 15Legal: 18
Change existing non-file deepdrawer to lateral file drawerLATDW 134
Legal: 18
S Standard Dodd’s Box heights:Upgrade Tandembox to Stainless Steel
S Standard Dodd’s Box heights:3 3/8 Up to 6 high drawer front 573 /83 15/165 11/
Up to 12 high drawer front 116165 11/166 15/16
Add Complete Drawer to Cabinet6 15/168 7/16 Up to 6 high drawer front 2568 /16
S Add complete Dodd’s Drawer: standard Up to 12 high drawer front 301Add complete Dodd s Drawer: standardheight to fit opening used unless customheight is specified; standard depth to fit
Remove Drawer Creditheight is specified; standard depth to fitused unless custom depth side mount DRWRCR all drawers 74used unless custom depth side mountspecified Add to price of cabinet.
IS64 March 1, 2007
BASE CABINET MODIFICATIONS2595 2595
Finished Back/Back Modification Finished Back/Back Modification
Mel PlyS Does not change cabinet depthU d 48 id b k
FFBACKH HPL $ 235 $ 288S Under 48 wide, no seam on backS Melamine cabinet: HPL back
FFBACKV veneer 235 288S Melamine cabinet: HPL backS HPL cabinet: HPL back
3/4 BackS HPL cabinet: HPL backS Veneer cabinet: Veneer back BACK34 96 119S Veneer cabinet: Veneer backS 3/4 back replaces 1/4 back and hanger strips Add to price of cabinet.
2600 2600
Extend Base Side Down And/Or Back Extend Base Side Down And/Or Back
Mel Ply
EBSD $ 20 $ 24
EBSDT 20 24
Extend Side DownS d d N N h
NLN N/C N/CExtend Side DownStandard No Notch NLF N/C N/C
EBSB 0 - 12 83 102
S EBSD: extend base side down and nonotch for toe kick
S EBSDT: extend base side down andnotch for toe kick
S NLN: no legs, no sockets, extend bothsides down, and notch for toe kick
S NLF: no legs, no sockets, extend bothsides down, and no notch for toe kick
S EBSB: extend base side back
4 1/2
4 1/2
Extend Side DownOptional Notched
Extend Side Back
Add to price of cabinet.
2630 2630
Real Wood Edgebanding Real Wood Edgebanding
S Not available on melamine cabinets Mel Ply
S Not available on HPL plywoodbi t
BANDW N/A $ 101p ycabinets
S Not available painted or withDesigner’s Line finishes unlessfinished interior
Charge is per cabinet.
IS65March 1, 2007
BASE CABINET ACCESSORIES
2700 2700
Super Susan Super Susan
IDC
SS32 2 tray wood $ 631
S Installed in DBC36 or SCB36(SCB shown)
S Wood Susans: one susan on fixedshelf, one susan on cabinet floor
S No custom sizes
Add to price of cabinet.
2720 2720
Pantry Spice Rack Base Pantry Spice Rack Base
S Cannot use door spice rack and rolloutshel es in same cabinet
Wood Wire Wood IDCpshelves in same cabinet
Wood:
Wood WirePSRB $ 164
Wood:
S Not available on cabinet under 12 wideWire
S Not available on cabinet under 12 wide
S Adjustable shelvesPSRW1224 202
S Adjustable shelves
S 4 3/16 deep PSRW1824 202S 4 3/16 deep
S Not available with 170_ hinge
Wire:
S Fixed shelves
S Chrome
S Available sizes are:9 5/8 w x 16 h x 2 5/8 d -- 4 shelves15 1/2 w x 16 h x 2 5/8 d -- 4 shelves
S Not available on cabinet under 12 wide
S Hafele item
S Not available with 170_ hinge
Add to price of cabinet.
2730 2730
Tilt Out Storage Bin Tilt Out Storage Bin
Cabinet IDC
TILT 24 - 29 $ 66
TILTA >29 - 32 66
TILTB >32 - 35 66
TILTC >35 - 42 66
TILTD >42 111
HXTILT hinges only 30
S Single tray 24 through 42 ; doubletray >42 through 48
S Epoxy coated white only
S Actual tray widths available:10 , 14 , 19 , 25 , 28 , 31
S Feeny item
Add to price of cabinet.
IS67March 1, 2007
BASE CABINET ACCESSORIES2740 2740
Base Open End Shelves Base Open End Shelves
24 12 Mel Ply24 12
BOS laminate $ 456 N/A
BOSV veneer 589 $ 648
30 BOSH HPL 568 64830
BHR laminate 456 N/A
BHRV veneer 589 648
C d fl t l t i t i d24 BHRH HPL 568 648
S Code reflects complete interior andexterior top & bottom; must specify forfinished ends, no charge
S Fixed shelves; 3/4 backs
S Caps for leveling/toeboard legs arevisible; specify for no legs, no charge
S Specify BOS curve left or curve right,curve right shown
S Both units 24 deep with 12 radius
S BOS: toeboard available on 12 wideonly
BOS
BHR
2750 2750
Breadboards Breadboards
IDC
S Can be ordered for any base cabinet BB1 up to 24 w cab $ 150S Breadboard behind drawer front isstandard
BB2 up to 42 w cab 211standard
S Specify for above drawer front, no BBSLIDES pair of slides 15S Specify for above drawer front, nocharge (not available with paneledfront)
BB per sq ft (cut to size) 34front)
S Over 28 wide cabinet specifyWood Conditioner 15
S Over 28 wide cabinet, specifybreadboard left, right, or full width
S Maximum full width breadboardcabinet is 34
S Use appropriate wood conditionerperiodically on breadboards
Add to price of cabinet.
2760 2760
Pull Out Chopping Block Pull Out Chopping Block
IDC
CB up to 24 $ 276
CB2 >24 - 36 400
D dd’ D il d 1 hi kWood Conditioner 15
S Dodd’s Dovetail drawer: 1 1/2 thickblock sits on cutdown drawer;chopping block is removable
S Tandembox drawer: 1 1/2 thick blockwith shallow drawer; removable blockinstalled above drawer with guidesand is behind drawer front
S Use appropriate wood conditionerperiodically on chopping block
Add to price of cabinet.
IS68 March 1, 2007
BASE CABINET ACCESSORIES2780 2780
Mixer Lift Up Shelf Mixer Lift Up Shelf
Mel Ply
MIXER $ 427 $ 449
S Minimum cabinet dimensions:13 1/2 w x 24 d
S Minimum opening height: 21 3/4S 16 of usable space above shelf
S For rollout below lift up shelf, use fullheight door and have lift up shelfmounted as high as possible
S Shelf depth is 17 5/8 and width is4 1/4 less than cabinet width
S When shelf is up, drawer cannot beopened
S 33 lb. capacity on shelf
S White hardware with standard shelfmaterial
S Hafele item
Add to price of cabinet.
2790 2790
Slide Out Wastebasket Slide Out Wastebasket
Attached to Door - Base Mel PlyWASTEBA single $ 565 $ 565WASTEBDA double 595 595
Attached to Door - Base Full HeightWASTEBFHA single 635 635WASTEBFHDA double 675 675
Not Attached to Door - BaseWASTEB single 460 460WASTEBD double 490 490
Not Attached to Door - Base Full Height
S Fits minimum 24 deep cabinetWASTEBFH single 530 530
S Fits minimum 24 deep cabinet
C itWASTEBFD double 570 570
S Capacity:Single Base: 1 - 35 quart basketSingle Base Full Ht.: 1 - 50 quart basketDouble Base: 2 - 35 quart basketsDouble Base Full Ht.: 2 - 50 quart baskets
S Minimum Cabinet Width:Attached Not Attached
Single Base: 12 1/2 13 1/2Single Base Full Ht.: 13 1/2 14 1/2Double Base: 16 1/2 17 1/2Double Base Full Ht.: 17 1/2 18 1/2
S REV-A-SHELF item
S White baskets only
Add to price of cabinet.
IS69March 1, 2007
BASE CABINET ACCESSORIES2795 2795
Wire Slide Out Wastebasket Wire Slide Out Wastebasket
Not Attached to Door IDC
WASTEW single $ 214
WASTEDW double 304
WASTEWRC four basket 386
S Fits minimum 24 deep cabinet
S Baskets are removable and onlyavailable white
S Minimum Cabinet Width:Single: 13Double: 19Four: 27
S Capacity:Single: 1 - 30 quart basketDouble: 2 - 30 quart basketsFour: 4 - 27 quart baskets
S Feeny item
Add to price of cabinet.
2800 2800
Pull Out Recycling Center Pull Out Recycling Center
IDC
PORC $ 556
S Fits 21 cabinet opening
S Three 25 quart removable basketsand one 18 quart canvas bag
S REV-A-SHELF item
S Door is attached to pull out
Add to price of cabinet.
2820 2820
Slide Out Towel Slide Out Towel
IDC
TWLRACK2 2 bars $ 98
S Two-bar, chrome slide-out towel rackI t ll d di i
TWLRACK3 3 bars 110,Installed dimensions:3 5/8 w x 1 1/2 h x 18 1/8 long
S Special order with three barsInstalled dimensions:6 w x 1 1/2 h x 18 1/8 long
S Specify cabinet installation location
S Hafele item
Add to price of cabinet.
IS70 March 1, 2007
BASE CABINET ACCESSORIES2830 2830
Hidden Can Rack Hidden Can Rack
6 id i i bi tMel Ply
S 6 wide minimum cabinet
21 wide maximum cabinetHCR $ 606 $ 606
S 21 wide maximum cabinet
S Under 12 wide cabinet - must specifyaccess left or right
S Full extension drawer guides rated at100 lbs mounted at bottom
S Fixed shelves
Add to price of cabinet.
2850 2850
Rollout Shelves Rollout Shelves
Dodd’s Dovetail BoxWith UndermountGuides (Each) Mel Ply
ROSDOD $ 171 $ 171
Flat Dodd’s Dovetail Rollout WithSide-Mount Full Extension (Each)
ROSDODF 227 227
S Rollouts are not adjustable
C t d i k d
Cumulative Custom Charges – Add To Above(Dodd’s Rollout) (Each)
S Cannot use door spice rack androllout shelves in same cabinet
S Cannot use 170_ hinges with rollouts
Custom rollout depth withside-mount full extensionEXTROS 132 132S Cannot use 170 hinges with rollouts
S Standard with no shelf above singlerollout; specify for shelf, no charge
For 5 11/16 high rolloutROS6H 29 29rollout; specify for shelf, no charge
S Standard height of Dodd’s Dovetailrollout is 3 3/8 ; tall rollout is 5 11/16
For 8 7/16 high rolloutROS9H 60 60
rollout is 3 3/8 ; tall rollout is 5 11/16S Standard height of Tandem box rolloutis 3 5/ ; tall rollout is 5 5/
For 1/2 bottomROSBOT 29 29
is 3 5/16 ; tall rollout is 5 5/16S Cabinets with angles must havevertical divider on each angled side
For custom rollout heightup to 8 7/16ROSCUS 120 120g
S Flat Dodd’s rollout has rollout box with Tandembox (Each)Flat Dodd s rollout has rollout box withfull top ROSTBOX 221 221
S Flat rollout on Tandembox order willh 3/ h lf ith Bl id t
ROSTBOXT tall 272 272have 3/4 shelf with Blum guide; notavailable stainless steel
ROSTBOXF flat 101 122available stainless steel
S Rollouts will match wood and finish inROSTBOXFX flat - full ext. 151 172
S Rollouts will match wood and finish infinished interior cabinets Tandembox Stainless Steel (Each)finished interior cabinets
ROSTBOXSS 331 331
ROSTBOXTSS tall 404 404
Add to price of cabinet.
2860 2860
Beverage Drawer Beverage Drawer
IDC
S Available as Dodd’s Dovetail only BEV1 0 - 24 $ 207Available as Dodd s Dovetail only
S Standard with no shelf above beverage drawer; BEV2 >24 - 36 291S Standard with no shelf above beverage drawer;specify for shelf, no charge
S Dividers are fixed in standard drawer box height
S 4 x 4 inside dimension of squares, specify ifdifferent
S Beverage drawer will match wood and finish infinished interior cabinets
Add to price of cabinet.
IS71March 1, 2007
BASE CABINET ACCESSORIES2870 2870
Island Support Leg Island Support Leg
12IDC
12LEG $ 262
S 3/4 solid hardwood material
S Specify height
Specify
6
2880 2880
Silverware Divider Silverware Divider
IDC
SILDV wood $ 89
VSILDV vinyl 89
S Shipped loose, specify drawer
S Vinyl Divider: available in whiteCabinet Widths: 15 , 18 , 21 , 24 ;Vance Ind. item
S Wood Divider: specify oak, maple, orcherry; available in any drawer width
VSILDV - white
SILDV - wood
Add to price of cabinet.
2885 2885
Knife Block Insert Knife Block Insert
IDC
KBI $ 316
S 1/8 wide grooves, 1 1/4 on center,1 1/4 deep
S Shipped loose, specify drawer
S Maple only
S Available in any drawer width
Add to price of cabinet.
2890 2890
Sliding Bread Cover Sliding Bread Cover
IDC
WBBP
Dodd’s Dovetail drawer onTandemPlus slides withsliding plexiglass cover $ 100
Add to price of cabinet.
IS72 March 1, 2007
BASE CABINET ACCESSORIES2910 2910
Tray Divider Tray Divider
Per Divider IDC
TRAY vinyl $ 47
TRAYW wire 62
S Specify quantity of dividers in the ETRAY plywood 67Specify quantity of dividers in theopening
S Dividers will be centered unlessspecified on order
S Dividers are removable
S Chrome wire dividers available are12 or 18 high, 19 1/2 deep; Feenyitem
S Wood dividers are 1/2 thick (materialto match interior) held in place bywood track
Add to price of cabinet.
2920 2920
Pull Out Ironing Board Pull Out Ironing Board
IDC
POIB $ 669
S Fits 14 up to and including20 wide opening
S 18 1/2 deep folded, 37 deepextended
S White sliding hardware
S 12 wide ironing board
S Replaces drawer
S Not available on 5-piecedrawer fronts
S Hafele item
18 1/2 37Add to price of cabinet.
2930 2930
Marco Bread And Knife Drawer Marco Bread And Knife Drawer
IDC
MARCO $ 581
S Drawer front may require chain stop
S Only available in 24 deep cabinets
S Cabinet Widths: 15 , 18 , 21 & 24
S Slab drawer front only; not availableon paneled drawer fronts
S Woodfold-Marco item
Add to price of cabinet.
IS73March 1, 2007
BASE CABINET ACCESSORIES2940 2940
Vertical Divider In Base Vertical Divider In Base
Mel Ply
VTDV $ 96 $ 119
S Specify fixed divider location
S Fixed, edgebanded, 3/4 material tomatch interior
Add to price of cabinet.
2950 2950
Vinyl Spice Insert Vinyl Spice Insert
IDC
SPICE $ 89
S Fits any width drawer
S Shipped loose
S Available in white
S Taller and wider spice bottles may notwork
S REV-A-SHELF item
Add to price of cabinet.
2960 2960
Drawer Divider Drawer Divider
Per Divider IDC
SpecifySpecify DWRDV $ 47
S 5/8 solid wood fixed divider in Dodd’sDovetail drawer; not available inTandembox
S Specify fixed divider: front to backlocation or left to right location
S Watch for hardware location
Specify
Specify
Front to back
Left to right
Add to price of cabinet.
IS74 March 1, 2007
BASE CABINET ACCESSORIES2970 2970
Castors Castors
Installed IDC
Set of 4 0 - 36 w $ 288
Set of 6 >36 w 377
S Castors installed on base cabinets
S Double bottom in all cabinets withcastors installed (included in price)
1 1/2
Add to price of cabinet.
2990 2990
Base Wire Pull Out Base Wire Pull Out
IDC
WPS9 $ 816
WPS12 943
S Chrome pull out with three adjustablebaskets
S Specify left or right access
S WPS9:minimum opening:7 1/2 w x 26 7/8 h x 19 3/4 d
S WPS12:minimum opening:9 1/2 w x 26 7/8 h x 19 3/4 d
S Pull out unit attaches to cabinet door
S Hafele item
Add to price of cabinet.
2995 2995
Clipo Sliding Door Hardware Clipo Sliding Door Hardware
S Sliding door hardware List Per CabinetSliding door hardware
S Add to price of cabinet CLIPO SLIDING DOORS fax for quoteAdd to price of cabinet
S Fax factory for quote
S Double door cabinet only
S Hafele item
IS75March 1, 2007
BASE CABINET ACCESSORIES3000 3000
Base Fillers Base Fillers
Fillers Mel Ply
BF3L laminate $ 66 N/A
BF3V veneer 93 $ 103
BF3H HPL 90 98
BF6L laminate 74 N/A
BF6V veneer 106 117
BF6H HPL 102 112
Fillers With One Finished End Panel
BFF3 laminate 232 N/A
BFF3V veneer 242 268
BFF3H HPL 232 257
S Shipped assembledBFF6 laminate 243 N/A
S Shipped assembled
S Standard at 24 7/8 deep if no accentBFF6V veneer 253 278
S Standard at 24 7/8 deep if no accentstrip ordered BFF6H HPL 243 268strip ordered
S Specify end panel attached left or Fillers With Two Finished End PanelsS Specify end panel attached left orright BFF3D laminate 376 N/Aright(attached right shown) BFF3DV veneer 391 429( g )
S For foil applications, use laminate orif HPL l i
BFF3DH HPL 376 413pp ,specify HPL selection BFF6D laminate 383 N/A
BFF6DV veneer 398 439
BFF6DH HPL 383 422
3005 3005
3 Base Fillers -- Veneer With Half Spool & Rod Post Attached 3 Base Fillers -- Veneer With Half Spool &Rod Post Attached
3 Fillers Mel Ply
S Flush toe standard BF3VSR veneer $ 357 $ 367Flush toe standard
S Shipped assembled BF3VSRR veneer 357 367S Shipped assembled
S Standard at 24 deep 3 Fillers With One Finished End PanelStandard at 24 deep
S Specify end panel attached left BFF3VSR veneer 506 532S Specify end panel attached leftor right (attached right shown) BFF3VSRR veneer 506 532g ( g )
S 3 Half Spool & Rod Posttt h d fl h ith d f
Specify 3 Fillers With Two Finished End Panelspattached flush with edges offiller 8 high top and bottom
p y
BFF3DVSR veneer 655 693filler, 8 high top and bottom
S SR = Plain RodBFF3DVSRR veneer 655 693
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
3 wide
1 1/2
3007 3007
Base Pull Out Fillers Base Pull Out Fillers
Fillers Mel Ply
BF3PO $ 370 $ 370
BF6PO 440 440
S Standard with 30 high squareedged accent strip
S For additional accents, orturnings please specify
S No toe
S Rev-A-Shelf
IS76 March 1, 2007
BASE CABINET ACCESSORIES3010 3010
Base Accent Strips Base Accent Strips
Accent Strip IDC
AS3GE geneva laminate $ 17
AS3 wood 92
AS3H HPL 89
S To be used with filler to create a AS3F Foil 92S To be used with filler to create auniform front, flush with doors and AS3FG high gloss foil 124uniform front, flush with doors anddrawers AS6GE geneva laminate 28
S Shipped loose for field installation AS6 wood 116pp
S Banded or shaped one long and two AS6H HPL 111Banded or shaped one long and twoshort edges standard, specify forbanded or shaped four edges for
AS6F Foil 114banded or shaped four edges foraccent strips over 2 1/2 wide AS6FG high gloss foil 192accent strips over 2 1/2 wide
S Accent strips with flutes will haveAccent Strip With Three Flutes
S Accent strips with flutes will havethem stop 1 1/2 from top and bottom AS3HF wood 200them stop 1 1/2 from top and bottomunless specified with print AS6HF wood 222unless specified with print
S Accent strips with three flutes, one AS3FF Foil 122Accent strips with three flutes, onegroove, and one circle route will have1 1/ between them and the top and
AS6FF Foil 175g1 1/2 between them and the top andbottom unless specified with print
f
Accent Strip With Three Flutes,One Groove and One Circle Route
S Foil wrapped accent strips with flutesgrooves and/or circle routes are
AS3HFC wood 247grooves, and/or circle routes areavailable in the same foil as the foil AS6HFC wood 269available in the same foil as the foilwrapped doors AS3FFC Foil 144wrapped doors
AS6FFC Foil 196
3020 3020
Base Radius End Base Radius End
S 2 1/4 radius on unit not true 3 Single HPL VenS 2 1/4 radius on unit, not true 3
S Single Radius End: BRE3 $ 585 $ 614S Single Radius End:Width: 3D h 24 7/
DoubleDepth: 24 7/8Height: 34 1/2
DBRE3 845 888Height: 34 1/2
S Double Radius End:Width: 3Depth: 25 3/4Height: 34 1/2
S Cutdown in height and depth, nocharge
S HPL or veneer applied over curvedbuildup
S Shipped loose for field installation
S For foil applications, specify HPLselection
BRE DBRE
IS77March 1, 2007
BASE CABINET ACCESSORIES3030 3030
Base Angled End Panel Base Angled End Panel
Wall Space Laminate IDCp
BAEPL left $ 394
BAEPR right 394
CabinetSolid Wood on Plywood Return
S To be used with base units in corner
CabinetWidth BAEPLV left 308
S To be used with base units in cornerapplication; avoids ordering angledb bi
BAEPRV right 308pp ; g gbase cabinets
S Height includes 4 1/ toe spaceHPL on Particle Board Return
S Height includes 4 1/2 toe space
S Base angled end panel right is shown1 1/2BAEPLH left 394
S Base angled end panel right is shown
S 24 deep with 45_ wing24
1 1/2
34 1/2BAEPRH right 394
S 24 deep with 45_ wing
S Cabinet Width Wall Space
34 1/2HPL on Plywood ReturnS Cabinet Width Wall Space
Req’d.24 42 1/
BAEPLHP left 434q24 42 1/227 44 5/86
BAEPRHP right 43427 44 5/830 46 3/433 48 7/836 51
6
3040 3040
Base End Panel Base End Panel
Mel Ply
BEP24L laminate $ 158 N/A
S 3/4 panel with edgebanding applied BEP24V veneer 259 $ 259/4 p g g pp
S 24 deep x 34 1/2 high with standardt ki k t h
BEP24H HPL 226 256p /2 gtoe kick notch
S Finished both sides and front edge
S For foil applications, use laminate orspecify HPL selection
S Shipped loose, adds 3/4 to cabinetrun
3050 3050
Dinnerware Insert Dinnerware Insert
S 1/2 thick plywood panel with holesd ill d 2 1/ t f d l ith
IDC/2 p y pdrilled 2 1/2 on center for dowels, with3/4 supports beneath cut to fit drawer DWINSERT $ 7183/4 supports beneath, cut to fit draweror rollout
S Includes 8 - 1/2 diameter dowels
S Shipped loose, specify which draweror rollout
S Recommended for units 30 or widerwith full width drawer
S Recommend 1/2 drawer/rolloutbottom with Dodd’s drawer/rollout
Add to price of cabinet.
IS78 March 1, 2007
BASE CABINET ACCESSORIES3060 3060
ORGA-LINE Plate Holder ORGA-LINE Plate Holder
S Plate holder dimensions:IDC
S Plate holder dimensions:6 deep OPH $ 2356 deep10 1/2 - 16 1/2 wide6 3/4 high
S Minimum height drawer opening: 8 3/16S The ORGA-LINE plate holder canadjust to fit plates that range indiameter from 7 to 12 5/8
S Handles make it easy to transfer platesfrom drawer to table; special rubberfeet prevent slippage no matter whereyou set the plate holder
S Blum item
3070 3070
ORGA-LINE Drawer Inserts For Dodd’s With TandemPlus ORGA-LINE Drawer InsertsFor Dodd’s With TandemPlus
CUTKIDC
S CUTK24:Cutlery kit for 24 deep cabinet; CUTK24 $ 282Cutlery kit for 24 deep cabinet;11 3/16 wide fits in 12 7/8 cabinet COMBOK24 30011 /16 wide fits in 12 /8 cabinetopening; 5 cutlery trays and 1compensation tray; see diagram for
COMBOK21 300compensation tray; see diagram forlayout
S COMBOK24:Combination utensil/cutlery kit for 24deep cabinet; 11 7/8 wide fits in13 9/16 cabinet opening; 5 cutlerytrays, 1 compensation tray and 4open spaces; see diagram for layout
S COMBOK21:Combination utensil/cutlery kit for 21deep cabinet; 11 7/8 wide fits in13 9/16 cabinet opening; 4 cutlerytrays and 5 open spaces; see diagramfor layout
S The spring-loaded components fitsnugly into the drawers
S Cutlery trays are dishwasher safe,stainless-steel, and removable
S The spring-loaded compensationtrays adjust to the drawer depth
S Blum itemCOMBOK21
COMBOK24
CUTK24
IS79March 1, 2007
BASE CABINET ACCESSORIES3080 3080
ORGA-LINE Drawer Inserts For IDC Tandembox Drawers ORGA-LINE Drawer InsertsFor IDC Tandembox Drawers
IDC
CUTS21 $ 197
CUTS24 197
CUTT21 274
CUTT24 274
UTENS21 171
UTENS24 171
UTENT21 291
UTENT24 291
S CUTS21/CUTS24:Single cutlery for 21 or 24 deepcabinet; 4 1/16 wide unit; 2 cutlerytrays and 1 plastic spacer tray; seediagram
S CUTT21/CUTT24:Triple cutlery for 21 or 24 deepcabinet; 11 1/16 wide unit; 6 cutlerytrays and 1 plastic spacer tray; seediagram
S UTENS21/UTENS24:Single utensil for 21 or 24 deepcabinet; 4 1/8 wide unit; 2 openings;see diagram
S UTENT21/UTENT24:Triple utensil for 21 or 24 deepcabinet; 11 1/2 wide unit; 6 openings;see diagram
S Cutlery trays are dishwasher safe,stainless-steel, and removable
S The plastic spacer tray keeps thetrays snug front to back
S Blum item
CUTS21 CUTS24
CUTT24
CUTT21
UTENS21/24 UTENT21/24
IS80 March 1, 2007
BASE CABINET ACCESSORIES3090 3090
Pull Out Grid Pull Out Grid
IDC
POG24 $ 590
1 9/16 POG36 713
S For installation under range tops or inopen areas between two cabinets
S Integrated safety rail at front and rear
S Chrome
S Minimum depth opening: 22
S Required openings:POG24: 23 5/8 widePOG36: 35 1/2 wide
S Hafele item
23 5/8 , 35 1/2
1 /16
21 5/8
3100 3100
Sink Matting Sink Matting
S White polystyrene material; dimpled toll t t 18 fl id
IDCp y y ; pcollect up to 18 fluid ounces persquare foot of water and other liquids
SINKMAT $ 117square foot of water and other liquids
S One size only, 24 5/8 x 45 1/2 ,shipped loose to be field-cut to fitindividual cabinets
S Hafele item
Shipped loose.
3110 3110
Wicker Baskets Wicker Baskets
IDC
WICKER15 per each $ 427
WICKER18 per each 427
S Natural wicker basket with beechframe; handles drilled into frame, frontand back; beech runners
S Minimum depth/height openings:depth 22 1/2height 7 7/8
S Required width openings(no doors/hinges in basket area):WICKER15: 13 1/2WICKER18: 16 1/2
S Install in cabinets, or between twocabinets
S Recommend finished interior ifinstalling in a cabinet; baskets remainnatural
S Hafele item
Add to price of cabinet.
IS81March 1, 2007
TALL CABINETS
4000 4000
84 High, 12 Deep Broom Cabinets 84 High, 12 Deep Broom Cabinets
Drs-DrwrFronts Mel Ply
BC121284 2-0 $ 627 $ 818
BC151284 2-0 644 840
BC181284 2-0 698 90912 BC211284 2-0 764 996
19BC241284 4-0 897 1168
19 BC271284 4-0 994 1297
BC301284 4-0 1091 1421
BC331284 4-0 1189 1551
BC361284 4-0 1288 1680
60 1/Finished End veneer 164 164
60 1/2 Finished End HPL 96 96
S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
Each tall door over 42 high has an additionaldoor style charge, e.g. BC331284 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 83 high, no charge.
4005 4005
84 High, 24 Deep Broom Cabinets 84 High, 24 Deep Broom Cabinets
Drs-DrwrFronts Mel Ply
BC122484 2-0 $ 673 $ 878
BC152484 2-0 747 972
BC182484 2-0 828 1079
24BC212484 2-0 898 1170
24BC242484 4-0 1018 1327
19BC272484 4-0 1134 1477
19BC302484 4-0 1246 1625
BC332484 4-0 1369 1785
BC362484 4-0 1474 1922
Finished End veneer 164 164
60 1/Finished End HPL 96 96
S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
60 1/2 Each tall door over 42 high has an additionaldoor style charge, e.g. BC332484 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 83 high, no charge.
IS83March 1, 2007
TALL CABINETS4007 4007
90 High, 12 Deep Broom Cabinets 90 High, 12 Deep Broom Cabinets
Drs-DrwrFronts Mel Ply
BC121290 2-0 $ 925 $ 1204
BC151290 2-0 943 1231
BC181290 2-0 996 1299
12 BC211290 2-0 1065 1388
BC241290 4-0 1194 1556
25BC271290 4-0 1291 1682
25BC301290 4-0 1389 1810
S One adjustable shelf in upper openingBC331290 4-0 1487 1940
S One adjustable shelf in upper opening
S No shelves in lower opening; forBC361290 4-0 1587 2070
S No shelves in lower opening; forshelves, see catalog #4800 Finished End veneer 164 164shelves, see catalog #4800
S If shelves are not ordered, large Finished End HPL 96 96If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
60 1/2Each tall door over 42 high has an additionaldoor style charge, e.g. BC331290 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 89 high, no charge.
4009 4009
90 High, 24 Deep Broom Cabinets 90 High, 24 Deep Broom Cabinets
Drs-DrwrFronts Mel Ply
BC122490 2-0 $ 971 $ 1267
BC152490 2-0 1042 1357
BC182490 2-0 1124 1466
24 BC212490 2-0 1195 155924BC242490 4-0 1315 1715
BC272490 4-0 1431 1864
25 BC302490 4-0 1545 201425BC332490 4-0 1665 2172
BC362490 4-0 1773 2313
Finished End veneer 164 164
Finished End HPL 96 96
S One adjustable shelf in upper opening
S No shelves in lower opening;for shelves, see catalog #4800
S If shelves are not ordered, large openingis not drilled for shelves standard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical dividerin larger opening (price is included)
60 1/2
Each tall door over 42 high has an additionaldoor style charge, e.g. BC332490 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 89 high, no charge.
IS84 March 1, 2007
TALL CABINETS4010 4010
96 High, 12 Deep Broom Cabinets 96 High, 12 Deep Broom Cabinets
Drs-DrwrFronts Mel Ply
BC121296 2-0 $ 925 $ 1204
BC151296 2-0 943 1231
BC181296 2-0 996 1299
12 BC211296 2-0 1065 1388
BC241296 4-0 1194 1556
31 BC271296 4-0 1291 168231BC301296 4-0 1389 1810
T dj t bl h l i iBC331296 4-0 1487 1940
S Two adjustable shelves in upper opening
S No shelves in lower opening; for shelvesBC361296 4-0 1587 2070
S No shelves in lower opening; for shelves,see catalog #4800 Finished End veneer 164 164see catalog #4800
S If shelves are not ordered, large opening60 1/
Finished End HPL 96 96If shelves are not ordered, large openingis not drilled for shelves standard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
S 93 high cabinets available at 96 price;specify cut to 93 high
60 1/2 Each tall door over 42 high has an additionaldoor style charge, e.g. BC331296 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 95 high, no charge.
4015 4015
96 High, 24 Deep Broom Cabinets 96 High, 24 Deep Broom Cabinets
Drs-DrwrFronts Mel Ply
BC122496 2-0 $ 971 $ 1267
BC152496 2-0 1042 1357
24BC182496 2-0 1124 1466
24BC212496 2-0 1195 1559
BC242496 4-0 1315 1715
31BC272496 4-0 1431 1864
BC302496 4-0 1545 2014
BC332496 4-0 1665 2172
BC362496 4-0 1773 2313
T dj bl h l i i60 1/2
Finished End veneer 164 164S Two adjustable shelves in upper opening
S No shelves in lower opening;
60 1/2Finished End HPL 96 96
S No shelves in lower opening;for shelves, see catalog #4800
S If shelves are not ordered, large openingis not drilled for shelves standard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical dividerin larger opening (price is included)
S 93 high cabinets available at 96 price;specify cut to 93 high
Each tall door over 42 high has an additionaldoor style charge, e.g. BC332496 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 95 high, no charge.
IS85March 1, 2007
TALL CABINETS4017 4017
84 High, 24 Deep Broom Cabinet With Pull Out Pantry 84 High, 24 Deep Broom CabinetWith Pull Out Pantry
Drs-DrwrFronts Mel Ply
BC122484TWP 2-0 $ 3169 $ 3374
BC332484TWP 4-0 6506 6922
24Finished End veneer 164 164
24Finished End HPL 96 96
19
60 1/2
S No adjustable shelvesS If height modifications apply, upper openingwill be modified
S BC122484TWP: single chrome pull out withfour baskets
S BC332484TWP: double chrome pull out witheight baskets
S Door is attached to pull outS Easily accessible from both sidesS Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 83 high, no charge.
4017.5 4017.5
90 High, 24 Deep Broom Cabinet With Pull Out Pantry 90 High, 24 Deep Broom CabinetWith Pull Out Pantry
Drs-DrwrFronts Mel Ply
BC122490TWP 2-0 $ 3467 $ 3763
BC332490TWP 4-0 6802 7309
24Finished End veneer 164 164
24Finished End HPL 96 96
25
60 1/2
S One adjustable shelf in upper openingS If height modifications apply, upper openingwill be modified
S BC122490TWP: single chrome pull out withfour baskets
S BC332490TWP: double chrome pull out witheight baskets
S Door is attached to pull outS Easily accessible from both sidesS Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 89 high, no charge.
IS86 March 1, 2007
TALL CABINETS4018 4018
96 High, 24 Deep Broom Cabinet With Pull Out Pantry 96 High, 24 Deep Broom CabinetWith Pull Out Pantry
Drs-DrwrFronts Mel Ply
BC122496TWP 2-0 $ 3467 $ 3763
24BC332496TWP 4-0 6802 7309
24Finished End veneer 164 164
Finished End HPL 96 96
31
S Two adjustable shelves in upper openingS If height modifications apply, upperopening will be modified
S BC122496TWP: single chrome pull out withfour baskets
S BC332496TWP: double chrome pull out witheight baskets
S Door is attached to pull outS Easily accessible from both sidesS 93 high cabinets available at 96 price;specify cut to 93 high
S Hafele item
60 1/2
Each tall door over 42 high has an additionaldoor style charge.
Specify for 95 high, no charge.
4020 4020
84 High, 24 Deep Broom Cabinet Drawers 84 High, 24 DeepBroom Cabinet Drawers
24Drs-DrwrFronts Mel Ply24
BC4D242484 2-4 $ 2024 $ 2530
BC4D302484 2-4 2257 2837
BC4D362484 2-4 2482 3132
49 1/Finished End veneer 164 164
49 1/2 Finished End HPL 96 96
S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, large openingis not drilled for shelves standard
S If height modifications apply, upperopening will receive the modification,unless specified
S Standard with cross rail between alldrawers
S Over 36 wide have vertical divider inlarger opening (price is included)
12
6
66
Each tall door over 42 high has an additionaldoor style charge, e.g. BC4D302484 has 4door style charges and 4 drawer front stylecharges.
Specify for 83 high, no charge.
IS87March 1, 2007
TALL CABINETS4022 4022
90 High, 24 Deep Broom Cabinet Drawers 90 High, 24 DeepBroom Cabinet Drawers
24Drs-DrwrFronts Mel Ply
BC4D242490 2-4 $ 2320 $ 2918
BC4D302490 2-4 2556 3226
BC4D362490 2-4 2782 3519
Finished End veneer 164 164
55 1/2 Finished End HPL 96 96
S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Standard with cross rail between alldrawers
S Over 36 wide have vertical divider inlarger opening (price is included)
12
666
55 /2Each tall door over 42 high has an additionaldoor style charge, e.g. BC4D302490 has 4door style charges and 4 drawer front stylecharges.
Specify for 89 high, no charge.
4025 4025
96 High, 24 Deep Broom Cabinet Drawers 96 High, 24 DeepBroom Cabinet Drawers
24
Drs-DrwrFronts Mel Ply24
BC4D242496 2-4 $ 2320 $ 2918
BC4D302496 2-4 2556 3226
BC4D362496 2-4 2782 3519
Finished End veneer 164 164
61 1/2Finished End HPL 96 96
S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Standard with cross rail between alldrawers
S Over 36 wide have vertical divider inlarger opening (price is included)
S 93 high cabinets available at 96price; specify cut to 93 high
12
666
61 1/2Each tall door over 42 high has an additionaldoor style charge, e.g. BC4D302496 has 4door style charges and 4 drawer front stylecharges.
Specify for 95 high, no charge.
IS88 March 1, 2007
TALL CABINETS4030 4030
65 High, 12 Deep Broom Cabinets Full Height 65 High, 12 Deep Broom CabinetsFull Height
Drs-DrwrFronts Mel Ply
BCFH121265 1-0 $ 564 $ 756
BCFH151265 1-0 581 777
BCFH181265 1-0 635 846
BCFH211265 1-0 701 933
BCFH241265F * 1-0 771 1043
12 BCFH241265 2-0 771 1043
BCFH271265 2-0 868 1171
BCFH301265 2-0 966 1296
BCFH331265 2-0 1065 1425
S No shelves; for shelves seeBCFH361265 2-0 1163 1555
S No shelves; for shelves, seecatalog #4800
60 1/2 Finished End veneer 164 164catalog #4800
S If shelves are not ordered opening is
2
Finished End HPL 96 96S If shelves are not ordered, opening isnot drilled for shelves standard
S Over 36 wide have vertical divider(price is included)
S 24 wide cabinet available with 1 fullwidth door (4 hinges)
Each tall door over 42 high has an additionaldoor style charge, e.g. BCFH331265 has 4door style charges.
Door arrangements may be changed, add $67.
Specify for cutdown, no charge.
* 4 door style charges apply.
4032 4032
65 High, 24 Deep Broom Cabinets Full Height 65 High, 24 Deep Broom CabinetsFull Height
Drs-DrwrFronts Mel Ply
BCFH122465 1-0 $ 610 $ 815
BCFH152465 1-0 684 909
BCFH182465 1-0 765 1017
BCFH212465 1-0 835 110824 BCFH242465F * 1-0 892 1202
BCFH242465 2-0 892 1202
BCFH272465 2-0 1008 1352
BCFH302465 2-0 1120 1500
BCFH332465 2-0 1244 1659
60 1/2 BCFH362465 2-0 1349 17962
Finished End veneer 164 164
N h l f h lFinished End HPL 96 96
S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, opening isnot drilled for shelves standard
S Over 36 wide have vertical divider(price is included)
S 24 wide cabinet available with 1 fullwidth door (4 hinges)
Each tall door over 42 high has an additionaldoor style charge, e.g. BCFH332465 has 4door style charges.
Door arrangements may be changed, add $67.
Specify for cutdown, no charge.
* 4 door style charges apply.
IS89March 1, 2007
TALL CABINETS4034 4034
65 High, 12 Deep Broom Cabinets Equal Doors 65 High, 12 Deep Broom CabinetsEqual Doors
Drs-DrwrFronts Mel Ply
BCE121265 2-0 $ 627 $ 818
BCE151265 2-0 644 840
BCE181265 2-0 698 90912 BCE211265 2-0 764 996
BCE241265 * 2-0 897 1168
1BCE241265 4-0 897 1168
30 1/4 BCE271265 4-0 994 1297
BCE301265 4-0 1091 1421
BCE331265 4-0 1189 1551
S 2 equal height doors, fixed shelf BCE361265 4-0 1288 16802 equal height doors, fixed shelfbetween30 1/4 Finished End veneer 164 164
S No shelves; for shelves, seel #4800
30 1/4Finished End HPL 96 96; ,
catalog #4800
S If shelves are not ordered, openingsare not drilled for shelves standard
S Over 36 wide have vertical divider(price is included); must specify top orbottom opening
S 24 wide cabinet available with fullwidth doors
Each tall door over 42 high has an additionaldoor style charge, e.g. BCE331265 has 4 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for cutdown, no charge.
* 4 door style charges apply.
4036 4036
65 High, 24 Deep Broom Cabinets Equal Doors 65 High, 24 Deep Broom CabinetsEqual Doors
Drs-DrwrFronts Mel Ply
BCE122465 2-0 $ 673 $ 878
BCE152465 2-0 747 972
BCE182465 2-0 828 1079
24BCE212465 2-0 898 1170
24BCE242465 * 2-0 1018 1327
BCE242465 4-0 1018 1327
30 1/4BCE272465 4-0 1134 1477
30 1/4BCE302465 4-0 1246 1625
BCE332465 4-0 1369 1785
2 l h i ht d fi d h lfBCE362465 4-0 1474 1922
S 2 equal height doors, fixed shelfbetween30 1/4 Finished End veneer 164 164between
S No shelves; for shelves, see
30 /4
Finished End HPL 96 96S No shelves; for shelves, seecatalog #4800
S If shelves are not ordered, openingsare not drilled for shelves standard
S Over 36 wide have vertical divider(price is included); must specify top orbottom opening
S 24 wide cabinet available with fullwidth doors
Each tall door over 42 high has an additionaldoor style charge, e.g. BCE332465 has 4 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for cutdown, no charge.
* 4 door style charges apply.
IS90 March 1, 2007
TALL CABINETS4040 4040
84 High, 12 Deep Broom Cabinet Reverse 84 High, 12 DeepBroom Cabinet Reverse
Drs-DrwrFronts Mel Ply
BCR121284 2-0 $ 627 $ 818
BCR151284 2-0 644 840
12BCR181284 2-0 698 909
12BCR211284 2-0 764 996
BCR241284 4-0 897 1168
BCR271284 4-0 994 1297
BCR301284 4-0 1091 1421
S No shelves in upper opening (seet l #4800) t dj t bl
49 1/2 BCR331284 4-0 1189 1551pp p g (catalog #4800), two adjustableshelves in lower opening
2
BCR361284 4-0 1288 1680shelves in lower opening
S If shelves are not ordered largeFinished End veneer 164 164
S If shelves are not ordered, largeopening is not drilled for shelves Finished End HPL 96 96opening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
30
Each tall door over 42 high has an additionaldoor style charge, e.g. BCR301284 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 83 high, no charge.
4042 4042
84 High, 24 Deep Broom Cabinet Reverse 84 High, 24 DeepBroom Cabinet Reverse
Drs-DrwrFronts Mel Ply
BCR122484 2-0 $ 673 $ 878
BCR152484 2-0 747 972
BCR182484 2-0 828 1079
24BCR212484 2-0 898 1170
24BCR242484 4-0 1018 1327
BCR272484 4-0 1134 1477
BCR302484 4-0 1246 1625
BCR332484 4-0 1369 1785
49 1/2BCR362484 4-0 1474 192249 1/2Finished End veneer 164 164
Finished End HPL 96 96
S No shelves in upper opening (seecatalog #4800), two adjustableshelves in lower opening
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
30
Each tall door over 42 high has an additionaldoor style charge, e.g. BCR302484 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 83 high, no charge.
IS91March 1, 2007
TALL CABINETS4043 4043
90 High, 12 Deep Broom Cabinet Reverse 90 High, 12 DeepBroom Cabinet Reverse
Drs-DrwrFronts Mel Ply
BCR121290 2-0 $ 925 $ 1204
12BCR151290 2-0 943 1231
12BCR181290 2-0 996 1299
BCR211290 2-0 1065 1388
BCR241290 4-0 1194 1556
BCR271290 4-0 1291 1682
55 1/2 BCR301290 4-0 1389 1810
S No shelves in upper opening (see
55 /2
BCR331290 4-0 1487 1940No shelves in upper opening (seecatalog #4800), two adjustableshelves in lower opening
BCR361290 4-0 1587 2070shelves in lower opening
S If shelves are not ordered largeFinished End veneer 164 164
S If shelves are not ordered, largeopening is not drilled for shelves Finished End HPL 96 96opening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical dividerin larger opening (price is included)
30
Each tall door over 42 high has an additionaldoor style charge, e.g. BCR301290 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 89 high, no charge.
4043.5 4043.5
90 High, 24 Deep Broom Cabinet Reverse 90 High, 24 DeepBroom Cabinet Reverse
Drs-DrwrFronts Mel Ply
BCR122490 2-0 $ 971 $ 1267
BCR152490 2-0 1042 1357
BCR182490 2-0 1124 1466
BCR212490 2-0 1195 155924 BCR242490 4-0 1315 1715
BCR272490 4-0 1431 1864
BCR302490 4-0 1545 2014
BCR332490 4-0 1665 2172
BCR362490 4-0 1773 2313
55 1/Finished End veneer 164 164
55 1/2 Finished End HPL 96 96
S No shelves in upper opening (see catalog#4800), two adjustable shelves in lower opening
S If shelves are not ordered, large opening is notdrilled for shelves standard
S If height modifications apply, upper opening willreceive the modification, unless specified
S Over 36 wide have vertical divider in largeropening (price is included)
30
Each tall door over 42 high has an additionaldoor style charge, e.g. BCR302490 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 89 high, no charge.
IS92 March 1, 2007
TALL CABINETS4044 4044
96 High, 12 Deep Broom Cabinet Reverse 96 High, 12 DeepBroom Cabinet Reverse
Drs-DrwrFronts Mel Ply
BCR121296 2-0 $ 925 $ 1204
12BCR151296 2-0 943 1231
12BCR181296 2-0 996 1299
BCR211296 2-0 1065 1388
BCR241296 4-0 1194 1556
BCR271296 4-0 1291 1682
S No shelves in upper opening (see61 1/BCR301296 4-0 1389 1810S No shelves in upper opening (see
catalog #4800), two adjustableh l i l i
61 1/2 BCR331296 4-0 1487 1940g ), jshelves in lower opening
If h l d d lBCR361296 4-0 1587 2070
S If shelves are not ordered, largeopening is not drilled for shelves
Finished End veneer 164 164opening is not drilled for shelvesstandard Finished End HPL 96 96standard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical dividerin larger opening (price is included)
S 93 high cabinets available at 96price; specify cut to 93 high
30
Each tall door over 42 high has an additionaldoor style charge, e.g. BCR301296 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 95 high, no charge.
4046 4046
96 High, 24 Deep Broom Cabinet Reverse 96 High, 24 DeepBroom Cabinet Reverse
Drs-DrwrFronts Mel Ply
BCR122496 2-0 $ 971 $ 1267
BCR152496 2-0 1042 1357
BCR182496 2-0 1124 1466
24 BCR212496 2-0 1195 155924BCR242496 4-0 1315 1715
BCR272496 4-0 1431 1864
BCR302496 4-0 1545 2014
BCR332496 4-0 1665 2172
61 1/BCR362496 4-0 1773 2313
61 1/2 Finished End veneer 164 164
Finished End HPL 96 96
S No shelves in upper opening (see catalog#4800), two adjustable shelves in lower opening
S If shelves are not ordered, large opening is notdrilled for shelves standard
S If height modifications apply, upper opening willreceive the modification, unless specified
S Over 36 wide have vertical divider in largeropening (price is included)
S 93 high cabinets available at 96 price; specifycut to 93 high
30
Each tall door over 42 high has an additionaldoor style charge, e.g. BCR302496 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 95 high, no charge.
IS93March 1, 2007
TALL CABINETS4050 4050
84 High, 24 Deep Broom Cabinet Reverse Drawer 84 High, 24 DeepBroom Cabinet Reverse Drawer
24Drs-DrwrFronts Mel Ply24
BCRD242484 4-1 $ 1331 $ 1710
BCRD302484 4-2 1651 2098
BCRD362484 4-2 1879 2396
49 1/2 Finished End veneer 164 16449 /2
Finished End HPL 96 96
S No shelves in upper opening(see catalog #4800), one adjustableshelf in lower opening
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
24
6
Each tall door over 42 high has an additionaldoor style charge, e.g. BCRD302484 has 6door style charges.
Specify for 83 high, no charge.
4053 4053
90 High, 24 Deep Broom Cabinet Reverse Drawer 90 High, 24 DeepBroom Cabinet Reverse Drawer
24Drs-DrwrFronts Mel Ply24
BCRD242490 4-1 $ 1631 $ 2098
BCRD302490 4-2 1949 2487
BCRD362490 4-2 2176 2784
Finished End veneer 164 164
55 1/2Finished End HPL 96 96
S No shelves in upper opening(see catalog #4800), one adjustableshelf in lower opening
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
24
6
55 1/2Each tall door over 42 high has an additionaldoor style charge, e.g. BCRD302490 has 6door style charges.
Specify for 89 high, no charge.
IS94 March 1, 2007
TALL CABINETS4055 4055
96 High, 24 Deep Broom Cabinet Reverse Drawer 96 High, 24 DeepBroom Cabinet Reverse Drawer
24Drs-DrwrFronts Mel Ply24
BCRD242496 4-1 $ 1631 $ 2098
BCRD302496 4-2 1949 2487
BCRD362496 4-2 2176 2784
Finished End veneer 164 164
61 1/2Finished End HPL 96 96
S No shelves in upper opening(see catalog #4800), one adjustableshelf in lower opening
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Over 36 wide have vertical divider inlarger opening (price is included)
S 93 high cabinets available at 96price; specify cut to 93 high
24
6
61 1/2Each tall door over 42 high has an additionaldoor style charge, e.g. BCRD302496 has 6door style charges.
Specify for 95 high, no charge.
4060 4060
84 High, 24 Deep Angled Broom Cabinet 84 High, 24 Deep Angled Broom Cabinet
24Drs-DrwrFronts Mel Ply
BCA242484 4-0 $ 1402 $ 1830
19 Finished End veneer 164 16419Finished End HPL 96 96
Set of Four Fixed Shelves
FSBCA 212 269
S No shelves standard
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S If height modifications apply, upperopening will receive the modification,unless specified
S Recommend adjacent cabinet havefinished end
60 1/2
Each tall door over 42 high has an additionaldoor style charge, e.g. BCA242484 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 83 high, no charge.
IS95March 1, 2007
TALL CABINETS4063 4063
90 High, 24 Deep Angled Broom Cabinet 90 High, 24 Deep Angled Broom Cabinet
24Drs-DrwrFronts Mel Ply
BCA242490 4-0 $ 1702 $ 2220
Finished End veneer 164 164
25 Finished End HPL 96 96
Set of Four Fixed Shelves
FSBCA 212 269
S No shelves in lower opening standard
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S One fixed shelf in upper opening
S If height modifications apply, upperopening will receive the modification,unless specified
S Recommend adjacent cabinet havefinished end
60 1/2
Each tall door over 42 high has an additionaldoor style charge, e.g. BCA242490 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 89 high, no charge.
4065 4065
96 High, 24 Deep Angled Broom Cabinet 96 High, 24 Deep Angled Broom Cabinet
24Drs-DrwrFronts Mel Ply
BCA242496 4-0 $ 1702 $ 2220
Finished End veneer 164 164
31 Finished End HPL 96 96
Set of Four Fixed Shelves
FSBCA 212 269
S No shelves in lower opening standard
S If shelves are not ordered, largeopening is not drilled for shelvesstandard
S Two fixed shelves in upper opening(89 & 90 high have one fixed shelfin upper opening)
S If height modifications apply, upperopening will receive the modification,unless specified
S Recommend adjacent cabinet havefinished end
S 93 high cabinets available at 96price; specify cut to 93 high
60 1/2
Each tall door over 42 high has an additionaldoor style charge, e.g. BCA242496 has 6 doorstyle charges.
Door arrangements may be changed, add $67.
Specify for 95 high, no charge.
IS96 March 1, 2007
TALL CABINETS4070 4070
84 High, 24 Deep Broom Cabinet ReverseWith Tandem Swiveling Pull Out
84 High, 24 Deep Broom CabinetReverse With Tandem Swiveling Pull Out
Drs-DrwrFronts Mel Ply
BCR182484TWS 2-0 $ 4111 $ 4363
BCR212484TWS 2-0 4273 4546
BCR362484TWS 4-0 8041 8489
Finished End veneer 164 164
Finished End HPL 96 96
30
24
49 1/2
S If height modifications apply, upperopening will be modified
S Chrome pull out and door rack:four fixed shelves on each door rackfour adjustable baskets for each pull outframe
S Opening the cabinet door makes the pull outframe slide forward
S 18 and 21 wide:One pull out unit with door rackTwo adjustable shelves in lower section
S 36 wide:Vertical dividers in upper and lowersectionsTwo pull out units with door racksTwo adjustable shelves each side ofdivider in lower section
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 83 high, no charge.
4070.5 4070.5
90 High, 24 Deep Broom Cabinet ReverseWith Tandem Swiveling Pull Out
90 High, 24 Deep Broom CabinetReverse With Tandem Swiveling Pull Out
Drs-DrwrFronts Mel Ply
BCR182490TWS 2-0 $ 4408 $ 4750
BCR212490TWS 2-0 4571 4934
BCR362490TWS 4-0 8340 8879
Finished End veneer 164 164
Finished End HPL 96 96
30
24
55 1/2
S If height modifications apply, upperopening will be modified
S Chrome pull out and door rack:four fixed shelves on each door rackfour adjustable baskets for each pull out frame
S Opening the cabinet door makes the pull outframe slide forward
S 18 and 21 wide:One pull out unit with door rackTwo adjustable shelves in lower section
S 36 wide:Vertical dividers in upper and lowersectionsTwo pull out units with door racksTwo adjustable shelves each side ofdivider in lower section
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 89 high, no charge.
IS97March 1, 2007
TALL CABINETS4071 4071
96 High, 24 Deep Broom Cabinet ReverseWith Tandem Swiveling Pull Out
96 High, 24 Deep Broom CabinetReverse With Tandem Swiveling Pull Out
Drs-DrwrFronts Mel Ply
BCR182496TWS 2-0 $ 4408 $ 4750
BCR212496TWS 2-0 4571 4934
BCR362496TWS 4-0 8340 8879
Finished End veneer 164 164
Finished End HPL 96 96
30
24
61 1/2
S If height modifications apply, upperopening will be modified
S Chrome pull out and door rack:four fixed shelves on each door rackfour adjustable baskets for each pull out frame
S Opening the cabinet door makes the pull outframe slide forward
S 18 and 21 wide:One pull out unit with door rackTwo adjustable shelves in lower section
S 36 wide:Vertical dividers in upper and lowersectionsTwo pull out units with door racksTwo adjustable shelves each side ofdivider in lower section
S 93 high cabinets available at 96 price;specify cut to 93 high
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 95 high, no charge.
4074.5 4074.5
90 High, 24 Deep Broom Cabinet Reverse With Gourmet Pantry 90 High, 24 Deep Broom CabinetReverse With Gourmet Pantry
24Drs-DrwrFronts Mel Ply
Swivel frame turned out,f
BCR362490TWG 4-0 $ 9901 $ 10441Swivel frame turned out,extension frame pulledforward automatically Finished End veneer 164 164forward automatically
Finished End HPL 96 96
30
55 1/2
S Additional fixed shelf installed in larger openingleaving 50 opening between fixed shelves
S Two adjustable shelves in lower openingS If height modifications apply, upper openingabove pantry will be modified
S Chrome pantry with:twenty baskets for swivel and extensionten baskets for doors
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 89 high, no charge.
IS98 March 1, 2007
TALL CABINETS4075 4075
96 High, 24 Deep Broom Cabinet Reverse With Gourmet Pantry 96 High, 24 Deep Broom CabinetReverse With Gourmet Pantry
24Drs-DrwrFronts Mel Ply
Swivel frame turned out,t i f ll d
BCR362496TWG 4-0 $ 9901 $ 10441,extension frame pulledforward automatically Finished End veneer 164 164forward automatically
Finished End HPL 96 96
30
61 1/2
S Additional fixed shelf installed in larger openingleaving 50 opening between fixed shelves
S Two adjustable shelves in lower openingS If height modifications apply, upper openingabove pantry will be modified
S Chrome pantry with:twenty baskets for swivel and extensionten baskets for doors
S 93 high cabinets available at 96 price;specify cut to 93 high
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 95 high, no charge.
4076 4076
84 High, 24 Deep Broom Cabinet With Gourmet Pantry 84 High, 24 Deep Broom CabinetWith Gourmet Pantry
24 Swivel frame turned out,
Drs-DrwrFronts Mel Ply24 Swivel frame turned out,
extension frame pulledforward automatically
BC362484TWG 4-0 $ 9603 $ 10050
19forward automatically
Finished End veneer 164 16419Finished End HPL 96 96
60 1/2
S Additional fixed shelf installed in larger openingleaving 50 opening below
S No adjustable shelves
S If height modifications apply, upper openingwill be modified
S Chrome pantry with:twenty baskets for swivel and extensionten baskets for doors
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 83 high, no charge.
IS99March 1, 2007
TALL CABINETS4076.5 4076.5
90 High, 24 Deep Broom Cabinet With Gourmet Pantry 90 High, 24 Deep Broom CabinetWith Gourmet Pantry
24Swivel frame turned out,extension frame pulled
Drs-DrwrFronts Mel Plyextension frame pulled
forward automatically BC362490TWG 4-0 $ 9901 $ 10441
Finished End veneer 164 164
25 Finished End HPL 96 96
60 1/2
S Additional fixed shelf installed in larger openingleaving 50 opening below
S One adjustable shelf in upper opening
S If height modifications apply, upper opening willbe modified
S Chrome pantry with:twenty baskets for swivel and extensionten baskets for doors
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 89 high, no charge.
4077 4077
96 High, 24 Deep Broom Cabinet With Gourmet Pantry 96 High, 24 Deep Broom CabinetWith Gourmet Pantry
24Swivel frame turned out,extension frame pulled
Drs-DrwrFronts Mel Ply24 extension frame pulled
forward automatically BC362496TWG 4-0 $ 9901 $ 10441o a d au o a ca y
Finished End veneer 164 164
31 Finished End HPL 96 9631
60 1/2
S Additional fixed shelf installed in larger openingleaving 50 opening below
S Two adjustable shelves in upper opening
S If height modifications apply, upper opening will bemodified
S Chrome pantry with:twenty baskets for swivel and extensionten baskets for doors
S 93 high cabinets available at 96 price;specify cut to 93 high
S Hafele item
Each tall door over 42 high has an additionaldoor style charge.
Specify for 95 high, no charge.
IS100 March 1, 2007
TALL CABINETS4080 4080
84 High, 24 Deep Broom Cabinet Pantry 84 High, 24 Deep Broom Cabinet Pantry
Drs-DrwrFronts Mel Ply
BCP302484 4-0 $ 3105 $ 3527
BCP362484 4-0 3334 3824
Finished End veneer 164 164
Finished End HPL 96 96
S No shelves in upper opening
S Must have 3 filler when against wall
S Must have 3 clearance on adjacentcabinets or appliances
S Each Door: adjustable shelf rack
S Center: two swing-out racks
S Right Rear: four adjustable shelves
S Left Rear: four adjustable shelves
S If height modifications apply, upperopening will receive the modification,unless specified
Each tall door over 42 high has an additionaldoor style charge, e.g. BCP302484 has 6 doorstyle charges.
Specify for 83 high, no charge.
4083 4083
90 High, 24 Deep Broom Cabinet Pantry 90 High, 24 Deep Broom Cabinet Pantry
Drs-DrwrFronts Mel Ply
BCP302490 4-0 $ 3404 $ 3916
BCP362490 4-0 3632 4214
Finished End veneer 164 164
Finished End HPL 96 96
S One adjustable shelf in upper opening
S Must have 3 filler when against wall
S Must have 3 clearance on adjacentcabinets or appliances
S Each Door: adjustable shelf rack
S Center: two swing-out racks
S Right Rear: four adjustable shelves
S Left Rear: four adjustable shelves
S If height modifications apply, upperopening will receive the modification,unless specified
Each tall door over 42 high has an additionaldoor style charge, e.g. BCP302490 has 6 doorstyle charges.
Specify for 89 high, no charge.
IS101March 1, 2007
TALL CABINETS4085 4085
96 High, 24 Deep Broom Cabinet Pantry 96 High, 24 Deep Broom Cabinet Pantry
Drs-DrwrFronts Mel Ply
BCP302496 4-0 $ 3404 $ 3918
BCP362496 4-0 3632 4214
Finished End veneer 164 164
Finished End HPL 96 96
S Two adjustable shelves in upper opening
S Must have 3 filler when against wall
S Must have 3 clearance on adjacentcabinets or appliances
S Each Door: adjustable shelf rack
S Center: two swing-out racks
S Right Rear: four adjustable shelves
S Left Rear: four adjustable shelves
S If height modifications apply, upperopening will receive the modification,unless specified
S 93 high cabinets available at 96 price;specify cut to 93 high
Each tall door over 42 high has an additionaldoor style charge, e.g. BCP302496 has 6 doorstyle charges.
Specify for 95 high, no charge.
4100 4100
84 High, 24 Deep Broom Cabinet Pantry Drawers 84 High, 24 DeepBroom Cabinet Pantry Drawers
Drs-DrwrFronts Mel Ply
BCPD302484 2-4 $ 4053 $ 4696
BCPD362484 2-4 4277 4991
Finished End veneer 164 164
Finished End HPL 96 96
S Must have 3 filler when against wall
S Must have 3 clearance on adjacentcabinets or appliances
S Each Door: adjustable can rack
S Center: two swing-out racks
S Right Rear: three adjustable shelves
S Left Rear: three adjustable shelves
S Above SOR: one adjustable shelf,one fixed shelf
S If height modifications apply, upperopening will receive the modification,unless specified
S Standard with cross rail between alldrawers
Each tall door over 42 high has an additionaldoor style charge, e.g. BCPD302484 has 4door style charges.
Specify for 83 high, no charge.
IS102 March 1, 2007
TALL CABINETS4103 4103
90 High, 24 Deep Broom Cabinet Pantry Drawers 90 High, 24 Deep BroomCabinet Pantry Drawers
Drs-DrwrFronts Mel Ply
BCPD302490 2-4 $ 4351 $ 5085
BCPD362490 2-4 4577 5378
Finished End veneer 164 164
Finished End HPL 96 96
S Must have 3 filler when against wall
S Must have 3 clearance on adjacentcabinets or appliances
S Each Door: adjustable can rack
S Center: two swing-out racks
S Right Rear: three adjustable shelves
S Left Rear: three adjustable shelves
S Above SOR: one adjustable shelf,one fixed shelf
S If height modifications apply, upperopening will receive the modification,unless specified
S Standard with cross rail between alldrawers
Each tall door over 42 high has an additionaldoor style charge, e.g. BCPD302490 has 4door style charges.
Specify for 89 high, no charge.
4105 4105
96 High, 24 Deep Broom Cabinet Pantry Drawers 96 High, 24 Deep BroomCabinet Pantry Drawers
Drs-DrwrFronts Mel Ply
BCPD302496 2-4 $ 4351 $ 5085
BCPD362496 2-4 4577 5378
Finished End veneer 164 164
Finished End HPL 96 96
S Must have 3 filler when against wall
S Must have 3 clearance on adjacentcabinets or appliances
S Each Door: adjustable can rack
S Center: two swing-out racks
S Right Rear: three adjustable shelves
S Left Rear: three adjustable shelves
S Above SOR: one adjustable shelf,one fixed shelf
S If height modifications apply, upperopening will receive the modification,unless specified
S Standard with cross rail between alldrawers
S 93 high cabinets available at 96price; specify cut to 93 high
Each tall door over 42 high has an additionaldoor style charge, e.g. BCPD302496 has 4door style charges.
Specify for 95 high, no charge.
IS103March 1, 2007
TALL CABINET MODIFICATIONS
4530 4530
Tall Pipe Chase Tall Pipe Chase
CUTOUTTIDC
ACUTOUTT
CUTOUTT standard $ 253A
BCUTOUTTS special 386
S When ordering, furnish simple sketchand dimensions
S Sketch and dimensions shown are forillustration only
B
A B C
D
CUTOUTTS
Add to price of cabinet.
4540 4540
Oversize Tall Oversize Tall
Mel Ply
AD4 >83 h - 96 h $ 408 $ 498
AD5 >24 d - 30 d 272 332
AD6 >96 h - 120 h 820 820
S Use for height modifications whenlarger cabinet is not available; use forall depth modifications
S Specify dimensions
S Drawer boxes & rollouts will beincreased to next available size;maximum Dodd’s with TandemPlusdepth is 21 ; maximum Tandemboxdepth is 22
Add to price of cabinet.
Apply appropriate charge for each dimensionchange, multiple charges are possible.
Additional charges will apply to oversizedcabinets beyond standard dimensions.Call or fax factory for quote.
4550 4550
Tall Cabinet Cutdown Tall Cabinet Cutdown
IDC
TCD N/C
S Start with the next largest standardsize cabinet and specify allappropriate cutdowns
S Cutdown in cabinet depth will result ina drawer depth of the next available3 increment (e.g. a BCD24 cut to 20deep will have drawers for an 18deep cabinet)
IS104 March 1, 2007
TALL CABINET MODIFICATIONS4575 4575
Decorative Door Applied Tall Decorative Door Applied Tall
Finished End IDCCabinetFront
CabinetFront
TDDAL laminate $ 273Front Front
TDDAV veneer 437
TDDAH HPL 369
S Standard panel arrangement is 2equal high panels
S Other arrangements can be orderedas special arrangement
S Decorative door attached to side ofcabinet, adds 3/4 to cabinet widthexcept on clipped corners
S Door is not operational
S 24 deep with 3/16 gap is standard,can specify 24 3/4 deep no charge
S Foil doors have white backs
23 13/16 dstandard
24 11/16 doptional
Add to price of cabinet.
Includes finished end charge.
For special arrangement, add 20%.
Add door style changes.
4580 4580
Flush Toe Flush Toe
IDC
FLTOE flush toe N/C
FLTOEC flush Corbel toe $ 224
S Leveling legs moved forward
S Visible gap between toeboard and cabinet
Flush Toe CorbelS Corbel toe will be flush with cabinetattached between the sides below bottom,fixed panel attached 3 1/2 behind face
S 12 wide cabinet minimum for Corbel
S Sides will extend to floor, no legs
S Available on cabinet front only
Add to price of cabinet.
4585 4585
Door Modifications Door Modifications
IDC
S CHGDOOR: change doorCHGDOOR $ 67
S CHGDOOR: change doorarrangement used when standard 170_ hinge upcharge per pair 10arrangement used when standardopening configuration is modified
S Do not use when making equal heightdoors on tall cabinets; watch for extradoor style charges
S 3 stiles and rails available certaindoor styles only, see door style pages
If no doors on cabinet, deduct $60 list pernormal door.No change door charge for two equal doors ontall cabinet.Extra door style charges may occur, e.g. twoequal doors on 89 , 90 , 95 or 96 highcabinets will not have a change door chargebut will have 8 door style charges, doors areover 42 .
IS105March 1, 2007
TALL CABINET MODIFICATIONS4600 4600
Finished Interior Tall Finished Interior Tall
Mel PlyFININTTBB2: interior beadboard back and standard
interior sides finishedFININTTV veneer $ 440 $ 220
interior sides finishedFININTTH HPL 425 220
FININTTBB2 beadboard 620 399
S Interior same as doors unlessspecified
S Specify for finished ends, no charge
S Exterior top matches interior
S Rollouts will be specie and finish ofinterior
S Drawer boxes will not be finished thesame as interior unless specified
Add to price of cabinet.
4620 4620
Angled Front And/Or Sides Angled Front And/Or Sides
45_angledf
IDC
12
45_side
gfront
idANGLET
first22 1/2_ or 45_ $ 306
12
back
side
ANGLET2additional each22 1/2_ or 45_ 205
12f t
backANGLETSP special angle 452
S 22 1/2_ angle side is shown
S Specify widest cabinet dimension and angle
S Cabinets may have short shelves due toangle
S If rollouts are ordered, add for requiredvertical divider on angled side; see catalog#4850
22.5_
5
12
angledside
front
back
side
Add to price of cabinet.
Largest dimension indicates original cabinetcharge.
Add all other modification charges, asapplicable.
4625 4625
3 x 3 Clipped Corner Tall 3 x 3 Clipped Corner Tall
Cabinet End Each Clip Mel Ply
Accent Strip Support ANGLETCC $ 257 $ 257Accent Strip Support
Hinge Stile 53.13_ ANGLETCCVDV 409 447
S 3 x 3 clipped corners do not followexact 45_ angle due to construction;they are at 53.13_ (see print)
S Use ANGLETCC charge for standardclipped corner, no side mounteditems; use ANGLETCCVDV chargewhen side mounted items are used incabinet, e.g. rollouts, drawer stack,and lift up ironing board
S If decorative door is ordered,decorative door will be built intocabinet dimension
Hinge Stile
Accent Strip
53.13Add to price of cabinet.
Add for required accent strips, see catalog #4870.
Use angle charge (catalog #4620) for clipsother than 3 x 3 .
IS106 March 1, 2007
TALL CABINET MODIFICATIONS4640 4640
3/4 Refrigerator End Panel 3/4 Refrigerator End Panel
Laminate Mel Ply
REP1284 $ 119 N/A
REP1290 119 N/A
CabinetREP1296 119 N/A
Panel
CabinetSide
Cabinet TopREP2484 239 N/A
PanelSide
Cabinet TopSpecify REP2490 239 N/A
REP2496 239 N/A
DoorFront View(after attached)
VeneerDoor (after attached)REP1284V 240 $ 263
REP1290V 240 263
REP1296V 240 263
SpecifyREP2484V 478 525
SpecifyREP2490V 478 525
REP2496V 478 525
HPL
S Shipped looseREP1284H 161 254
S Shipped loose
S Increases cabinet run by 3/ for eachREP1290H 161 254
S Increases cabinet run by 3/4 for eachend panel used REP1296H 161 254end panel used
S Inside and outside are same material REP2484H 322 505S Inside and outside are same materialand finish REP2490H 322 505
S For foil applications, use laminate orif HPL l i
REP2496H 322 505pp ,specify HPL selection Add to price of cabinet.
83 high refrigerator end panels available at84 high price.89 & 95 high refrigerator end panelsavailable at 96 price.
4650 4650
Extend Refrigerator End Panel Back Extend Refrigerator End Panel Back
Specify Mel Plyp y
EXTREP up to 12 $ 112 $ 137
S Extends refrigerator end panel only,not box; inside cabinet depth does notchange
S Also use when extending tall cabinetside back
Add to price of refrigerator panel or tall cabinetwhen extending side back.
4660 4660
Flush Finished Back Flush Finished Back
S Does not change cabinet depth Mel PlyS Does not change cabinet depth
S No seam on back FFBACKTH HPL $ 355 $ 432S No seam on back
S Melamine cabinet: HPL back FFBACKTV veneer 355 432S Melamine cabinet: HPL back
S HPL cabinet: HPL back 3/4 BackHPL cabinet: HPL back
S Veneer cabinet: veneer back BACK34T 146 179Veneer cabinet: veneer back
S 3/4 back replaces 1/4 back andhanger strips
Add to price of cabinet.
IS107March 1, 2007
TALL CABINET MODIFICATIONS4670 4670
Shelf Modifications Shelf Modifications
Add One Fixed Shelf Mel Ply
S Specify placement of fixed shelf FIXSH $ 96 $ 119Specify placement of fixed shelf
4680 4680
Real Wood Edgebanding Real Wood Edgebanding
S Not available on melamine cabinets Mel PlyS Not available on HPL plywoodcabinets
BANDWT N/A $ 101cabinets
S Not available painted or withDesigner’s Line finishes unlessfinished interior
Charge is per cabinet.
IS108 March 1, 2007
TALL CABINET ACCESSORIES
4800 4800
Adjustable Shelves Adjustable Shelves
Size Mel Ply
ADJ1 6 d - 24 w $ 123 $ 164
ADJ2 12 d - 24 w 164 204
ADJ3 24 d - 24 w 212 281
ADJ4 6 d - 36 w 142 188
ADJ5 12 d - 36 w 188 249
ADJ6 24 d - 36 w 272 358
S Set of four adjustable shelves onstandard spoon clips
Add to price of cabinet.
4810 4810
Rollout Shelves Rollout Shelves
Dodd’s Dovetail BoxWith UndermountGuides (Each) Mel Ply
ROSDOD $ 171 $ 171
Flat Dodd’s Dovetail Rollout WithSide-Mount Full Extension (Each)
ROSDODF 227 227
Cumulative Custom Charges –Add to above (Dodd’s Rollout) (Each)
S Specify quantity
Custom rollout depth withside-mount full extensionEXTROS 132 132
S Specify quantity
S Rollouts are not adjustableFor 5 11/16 high rolloutROS6H 29 29
S Cannot use door spice rack androllout shelves in same cabinet
For 8 7/16 high rolloutROS9H 60 60
S Cannot use 170_ hinges with rollouts
S Standard height of Dodd’s Dovetail
For 1/2 bottomROSBOT 29 29
S Standard height of Dodd’s Dovetailrollout is 3 3/8 ; tall rollout is 5 11/16
S Standard height of Tandembox rolloutis 3 5/ ; tall rollout is 5 5/
For custom rollout heightup to 8 7/16ROSCUS 120 120
is 3 5/16 ; tall rollout is 5 5/16S Cabinets with angles must have
Tandembox (Each)S Cabinets with angles must havevertical divider on each angled side, ROSTBOX 221 221vertical divider on each angled side,charge applies ROSTBOXT tall 272 272charge applies
S Flat Dodd’s rollout has rollout box with ROSTBOXF flat 101 122S Flat Dodd s rollout has rollout box withfull top ROSTBOXFX flat - full ext. 151 172p
S Flat rollout on Tandembox order willhave 3/ shelf with Blum guide; not
Tandembox Stainless Steel (Each)have 3/4 shelf with Blum guide; notavailable stainless steel ROSTBOXSS 331 331available stainless steel
S Rollouts will match wood and finish inROSTBOXTSS tall 404 404
S Rollouts will match wood and finish infinished interior cabinets Add to price of cabinet.
IS109March 1, 2007
TALL CABINET ACCESSORIES4830 4830
Pantry Spice Rack Tall Pantry Spice Rack Tall
IDC
DSR wood $ 277
S Wood racks not available on cabinetunder 12 wide
S Adjustable shelves
S Rack depth is 4 3/16S Cannot use door spice rack androllout shelves in same cabinet
S Not available with 170_ hinge4 3/16
DSR
Add to price of cabinet.
4840 4840
Swing Out Rack Swing Out Rack
IDC
SWOR1 1 swing out $ 421
SWOR2 2 swing outs 979
S 4 deep fixed shelves in front andback of unit; 8 7/8 deep unit
S Cannot use door shelf racks withsingle swing out rack
S Recommended for BC-18 and wider13 1/2
12
11
11 1/2
8 1/2
Add to price of cabinet.
SWOR2 includes vertical divider.
4850 4850
Vertical Divider Vertical Divider
Mel Ply
VDV $ 152 $ 190
Use wall cabinet code forupper section,VTDV 96 119
S Lower section only
S Fixed, edgebanded, 3/4 material tomatch interior
Add to price of cabinet.
IS110 March 1, 2007
TALL CABINET ACCESSORIES4853 4853
Tray Divider Tray Divider
S Specify quantity of dividers in thei
Per Divider IDCp y q yopening TRAY vinyl $ 47
S Dividers will be centered unlessifi d d
TRAYW wire 62specified on order ETRAY plywood 67
S Dividers are removable
S Chrome wire dividers available are12 or 18 high, 19 1/2 deep; Feenyitem
S Wood dividers are 1/2 thick (materialto match interior) held in place bywood track
Add to price of cabinet.
4860 4860
Tall Fillers Tall Fillers
Fillers Mel PlyTF3L laminate $ 109 N/ATF3V veneer 147 $ 163TF3H HPL 141 156TF6L laminate 121 N/ATF6V veneer 158 173
SpecifyTF6H HPL 152 167
SpecifyFillers with One Finished End Panel
Specify TFF3 laminate 601 N/Ap yTFF3V veneer 625 688TFF3H HPL 601 661TFF6 laminate 611 N/ATFF6V veneer 636 699
S Shipped with top return loose front4 1/TFF6H HPL 611 672
S Shipped with top return loose, frontand vertical return assembled
4 1/2 Fillers with Two Finished End Panelsand vertical return assembled
S Specify height with 4 1/2 toe space4 1/2 TFF3D laminate 1061 N/A
S Specify height with 4 1/2 toe space
S Standard at 12 7/ or 24 7/ deep if
2
TFF3DV veneer 1103 1213S Standard at 12 7/8 or 24 7/8 deep ifno accent strip ordered
TFF3DH HPL 1061 1171no accent strip ordered
S Specify end panel attached left orTFF6D laminate 1070 N/A
S Specify end panel attached left orright
TFF6DV veneer 1114 1225right
S For foil applications use laminate orTFF6DH HPL 1070 1181
S For foil applications, use laminate orspecify HPL selection
4863 4863
3 Tall Fillers -- Veneer With Half Spool & Rod Post Attached 3 Tall Fillers -- Veneer With Half Spool &Rod Post Attached
S Flush toe standard 3 Fillers Mel PlyFlush toe standard
S Shipped with top return loose, front TF3VSR veneer $ 602 $ 618S Shipped with top return loose, frontand vertical return assembled TF3VSRR veneer 602 618
S Specify height with 4 1/2 toe space 3 Fillers with One Finished End Panelp y g /2 p
S Standard at 12 or 24 deep TFF3VSR veneer 1081 1144Standard at 12 or 24 deep
S Specify end panel attached left or TFF3VSRR veneer 1081 1144Specify end panel attached left orright
S 3 Half Spool & Rod Post attachedflush with edges of filler, 8 high topand bottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
1 1/2
3 wide
Specify
IS111March 1, 2007
TALL CABINET ACCESSORIES4865 4865
Tall Angled End Panel Tall Angled End Panel
Wall Space Laminate IDC
TAEPL left $ 911
TAEPR right 911
CabinetSolid Wood on Plywood Return
S To be used with tall units in cornerCabinetWidth TAEPLV left 708To be used with tall units in corner
application; avoids ordering angled tallcabinetsSpecify
Width
TAEPRV right 708cabinets
S Specify height with 4 1/2 toe space
SpecifyHPL on Particle Board Return
S Specify height with 4 1/2 toe space
S Tall angled end panel right is shown TAEPLH left 911S Tall angled end panel right is shown
S 24 deep with 45_ wing TAEPRH right 911S 24 deep with 45_ wing
S Cabinet Width Wall Space Req’d.6HPL on Plywood ReturnS Cabinet Width Wall Space Req d.
24 42 1/227 44 5/
6Detail
fTAEPLHP left 10022
27 44 5/830 46 3/4
ofPanel TAEPRHP right 100230 46 3/4
33 48 7/836 51
1 1/2
24
Panel
4870 4870
Tall Accent Strips Tall Accent Strips
S To be used with filler to create a uniform Accent Strip IDCTo be used with filler to create a uniformfront, flush with doors and drawers AST3GE geneva laminate $ 36,
S Shipped loose for field installation AST3 wood 142Shipped loose for field installation
S Banded or shaped one long and two AST3H HPL 137S Banded or shaped one long and twoshort edges standard, specify for AST3F Foil 140short edges standard, specify forbanded or shaped four edges for accentt i 2 1/ id
AST3FG high gloss foil 168p gstrips over 2 1/2 wide AST6GE geneva laminate 44
S Accent strips with flutes will have flutest 1 1/ f t d b tt l
AST6 wood 235pstop 1 1/2 from top and bottom unlessspecified with print
AST6H HPL 227specified with print
A t t i ith th fl tAST6F Foil 230
S Accent strips with three flutes, onegroove and one circle route will have
AST6FG high gloss foil 316groove, and one circle route will have1 1/2 between them and the top and Accent Strip with Three Flutes1 1/2 between them and the top andbottom unless specified with print AST3HF wood 248bottom unless specified with print
S Foil wrapped accent strips with flutes AST3FF Foil 305S Foil wrapped accent strips with flutesare available in the same foil as the foil AST6HF wood 338are available in the same foil as the foilwrapped doors AST6FF Foil 388
4880 4880
Tall Radius Ends Tall Radius Ends
S 2 1/4 radius on unit, not true 3 Single Height HPL Ven/4 ,
S Specify curved left or curved right TRE83 83 $ 1084 $ 1138Specify curved left or curved right
S Single Radius End: TRE84 84 1084 1138S Single Radius End:Width: 3 TRE89 89 1140 1196Width: 3Depth: 12 7/8 or 24 7/8H i h if
TRE90 90 1140 1196p /8 /8Height: specify TRE95 95 1140 1196
S Double Radius End:Wid h 3
TRE96 96 1140 1196Width: 3Depth: 13 3/4 or 25 3/4
DoubleDepth: 13 3/4 or 25 3/4Height: specify DTRE83 83 1345 1412Height: specify
S Cutdown in height and depth no chargeDTRE84 84 1345 1412
S Cutdown in height and depth, no charge
S HPL or veneer applied over curved buildupDTRE89 89 1401 1470
S HPL or veneer applied over curved buildup
Shi d l f fi ld i ll iDTRE90 90 1401 1470
S Shipped loose for field installation DTRE95 95 1401 1470
S For foil applications, specify HPL selection DTRE96 96 1401 1470
IS112 March 1, 2007
TALL CABINET ACCESSORIES4890 4890
Tall Wire Pull Out Pantry Tall Wire Pull Out Pantry
IDC
TWP12 $ 2389
TWP16 2458
S Chrome pull out with four Additional Loose Baskets (EA)S Chrome pull out with fouradjustable baskets TWP12BL 158j
S TWP12: TWP16BL 230TWP12:minimum opening:10 1/2 w x 49 1/2 h x 20 d
S TWP16:minimum opening:14 1/4 w x 49 1/2 h x 20 d
S Maximum height opening: 68 3/4S Pull out unit attaches to cabinet door
S Hafele item
Add to price of cabinet.
4900 4900
Tall Gourmet Pantry Tall Gourmet Pantry
Swivel frame turned out,extension frame pulled
IDCextension frame pulledforward automatically TWG36 $ 7778
S Chrome pantry with:twenty baskets for swivel and extensionten baskets for doors
S Required height opening: 50
S Minimum openings:width: 34depth: 19 5/8
S Hafele item
forward automaticallyAdd to price of cabinet.
4910 4910
Tall Tandem Swiveling Pull Out Tall Tandem Swiveling Pull Out
IDC
TWS18 $ 3142
TWS20 3230
Additional Loose Baskets (EA)
TWS18BL 265
TWS20BL 265
S Chrome pull out and door rack:four fixed shelves on door rackfour adjustable baskets on pull out frame
S Minimum openings:TWS18: 16 1/4 w x 47 1/4 h x 19 3/4 dTWS20: 18 1/4 w x 47 1/4 h x 19 3/4 d
S Opening the cabinet door makes thepull out frame slide foward
S Hafele item
Add to price of cabinet.
IS113March 1, 2007
OVEN CABINETS
5000 5000
84 High, 24 Deep Single Oven Cabinets 84 High, 24 Deep Single Oven Cabinets
24Drs-DrwrFronts Mel Ply24
OC2484 4-0 $ 938 $ 1225
Specify OC2784 4-0 1022 1332SpecifyOC3084 4-0 1139 1486
OC3384 4-0 1243 1619
SpecifyOC3684 4-0 1344 1752
SpecifyFinished End veneer 164 164
Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Lower area will have shelves to matchsimilar base cabinet opening
S Fixed shelves (dotted line areas) arenot flush with cutout opening
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
Specify
Specify for 83 high, no charge.
5010 5010
90 High, 24 Deep Single Oven Cabinets 90 High, 24 Deep Single Oven Cabinets
24Drs-DrwrFronts Mel Ply
OC2490 4-0 $ 1237 $ 1612
OC2790 4-0 1321 1723
Specify OC3090 4-0 1440 1878p y
OC3390 4-0 1542 2010
OC3690 4-0 1644 2142
Finished End veneer 164 164
Specify Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Lower area will have shelves to matchsimilar base cabinet opening
S Fixed shelves (dotted line areas) arenot flush with cutout opening
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
Specify
Specify
Specify for 89 high, no charge.
IS114 March 1, 2007
OVEN CABINETS5020 5020
96 High, 24 Deep Single Oven Cabinets 96 High, 24 Deep Single Oven Cabinets
24Drs-DrwrFronts Mel Ply24
OC2496 4-0 $ 1237 $ 1612
OC2796 4-0 1321 1723
Specify OC3096 4-0 1440 1878Specify
OC3396 4-0 1542 2010
OC3696 4-0 1644 2142
Finished End veneer 164 164
Specify Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Lower area will have shelves to matchsimilar base cabinet opening
S Fixed shelves (dotted line areas) arenot flush with cutout opening
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
S 93 high cabinets available at 96 price;specify cut to 93 high
Specify
Specify
Specify for 95 high, no charge.
5030 5030
84 High, 24 Deep Double Oven Cabinets 84 High, 24 Deep Double Oven Cabinets
24Drs-DrwrFronts Mel Ply24
OC2484D 2-1 $ 1064 $ 1361
Specify OC2784D 2-1 1164 1491Specify
OC3084D 2-1 1267 1625
OC3384D 2-1 1368 1758
OC3684D 2-1 1470 1889
Finished End veneer 164 164Specify Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Fixed shelves (dotted line areas) arenot flush with cutout opening
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
Specify(5 minimum forworking drawer)
Specify for 83 high, no charge.
IS115March 1, 2007
OVEN CABINETS5040 5040
90 High, 24 Deep Double Oven Cabinets 90 High, 24 Deep Double Oven Cabinets
24Drs-DrwrFronts Mel Ply24
OC2490D 2-1 $ 1363 $ 1750
OC2790D 2-1 1464 1882
Specify OC3090D 2-1 1565 2015
OC3390D 2-1 1666 2146
OC3690D 2-1 1769 2279
Finished End veneer 164 164
Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Fixed shelves (dotted line areas) arenot flush with cutout opening
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
Specify
Specify(5 minimum forworking drawer)
Specify for 89 high, no charge.
5050 5050
96 High, 24 Deep Double Oven Cabinets 96 High, 24 Deep Double Oven Cabinets
24Drs-DrwrFronts Mel Ply24
OC2496D 2-1 $ 1363 $ 1750
OC2796D 2-1 1464 1882
Specify OC3096D 2-1 1565 2015
OC3396D 2-1 1666 2146
OC396D 2-1 1769 2279
Finished End veneer 164 164
Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Fixed shelves (dotted line areas) arenot flush with cutout opening
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
S 93 high cabinets available at 96 price;specify cut to 93 high
Specify
Specify(5 minimum forworking drawer)
Specify for 95 high, no charge.
IS116 March 1, 2007
OVEN CABINETS5060 5060
84 High, 24 Deep Oven-Micro Cabinets 84 High, 24 Deep Oven-Micro Cabinets
24Drs-DrwrFronts Mel Ply24
OC2484M 2-1 $ 1245 $ 1596
Specify OC2784M 2-1 1338 1718Specify
OC3084M 2-1 1450 1864
OC3384M 2-1 1540 1982
OC3684M 2-1 1632 2103
S ifFinished End veneer 164 164
SpecifyFinished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Fixed shelves (dotted line areas) areflush with center cutout openings only
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
Specify(5 minimum forworking drawer)
Specify for 83 high, no charge.
5070 5070
90 High, 24 Deep Oven-Micro Cabinets 90 High, 24 Deep Oven-Micro Cabinets
24Drs-DrwrFronts Mel Ply24
OC2490M 2-1 $ 1542 $ 1983
OC2790M 2-1 1636 2109
Specify OC3090M 2-1 1747 2252SpecifyOC3390M 2-1 1840 2371
OC3690M 2-1 1930 2490
Finished End veneer 164 164
Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Fixed shelves (dotted line areas) areflush with center cutout openings only
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
Specify
Specify(5 minimum forworking drawer)
Specify for 89 high, no charge.
IS117March 1, 2007
OVEN CABINETS5080 5080
96 High, 24 Deep Oven-Micro Cabinets 96 High, 24 Deep Oven-Micro Cabinets
24Drs-DrwrFronts Mel Ply24
OC2496M 2-1 $ 1542 $ 1983
OC2796M 2-1 1636 2109
Specify OC3096M 2-1 1747 2252p y
OC3396M 2-1 1840 2371
OC3696M 2-1 1930 2490
Finished End veneer 164 164
Finished End HPL 96 96
S Upper area will have shelves to matchsimilar wall cabinet opening
S Fixed shelves (dotted line areas) areflush with center cutout openings only
S Specify cutout and other dimensionson print
S See catalog #5090 for cutout panel options
S 93 high cabinets available at 96 price;specify cut to 93 high
Specify
Specify(5 minimum forworking drawer)
Specify for 95 high, no charge.
5090 5090
Oven Cutout Panels Oven Cutout Panels
S Specify cutout dimensions Loose Panel IDCp y
S List height from floor to where cutoutill t t
Laminate N/Cgwill start
S Send model numberHPL N/C
S Send model number
S Overlay on oven cabinets to matchFoil Wrapped $ 458
S Overlay on oven cabinets to matchdoor style High Gloss Foil Wrapped 593door style
S Laminate panel will be sent for jobsite Wood Frame N/CLaminate panel will be sent for jobsitecutout on orders with laminate doors;face frame will be sent on orders with Charge to Cutout Panels: Raw Inside Edgeface frame will be sent on orders withwood doors ICUT 80ood doo s
S Backs removed upon request;upcharge applies
Charge to Cutout Panels: Banded Inside Edgeupcharge applies
S Edgebanding is not recommended forICUTB 159
S Edgebanding is not recommended foran oven cutout due to the heat Charge to Attach Panelan oven cutout due to the heat
S Attached cutout panels are hinged ath h fi d h lf
ICPA 74ac ed c o pa e s a e ged athe top to the fixed shelf
S Certain edge profiles have maximumCharge to Remove Back
S Certain edge profiles have maximumcutout sizes in panel; for stiles and IBACK 51cutout sizes in panel; for stiles andrails under 2 1/4 wide, call factory foroptions
IS118 March 1, 2007
VANITY CABINETS
6000 6000
Standard Vanity Base Standard Vanity Base
Drs-DrwrFronts Mel Ply
6 VB12 1-1 $ 479 $ 581
VB15 1-1 494 601
21 VB18 1-1 527 642
VB21 1-1 570 696
VB24 2-1 620 762
VB27 2-1 648 795
VB30 2-2 872 1052
VB33 2-2 896 1084
VB36 2-2 923 1116
VB39 2-2 957 1162
VB42 2-2 1012 1232
Finished End veneer 86 86
S 31 1/2 high x 21 deepFinished End HPL 45 45
S 31 1/2 high x 21 deep
S One full depth adjustable shelf For each ROSDOD 171 171S One full depth adjustable shelf
S 24 and 27 wide have single drawer For each ROSTBOX 221 22124 and 27 wide have single drawer
S Cabinets over 39 have verticaldivider (price is included) and splitshelves
6010 6010
Tall Standard Vanity Base Tall Standard Vanity Base
Drs-DrwrFronts Mel Ply
6 TVB12 1-1 $ 489 $ 593
TVB15 1-1 516 630
24TVB18 1-1 556 677
24TVB21 1-1 603 736
TVB24 2-1 666 816
TVB27 2-1 707 872
TVB30 2-2 913 1107
TVB33 2-2 929 1128
TVB36 2-2 965 1171
TVB39 2-2 994 1210
TVB42 2-2 1052 1281
Finished End veneer 86 86
S 34 1/2 high x 21 deep Finished End HPL 45 4534 /2 high x 21 deep
S One full depth adjustable shelf For each ROSDOD 171 171p j
S 24 and 27 wide have single drawer For each ROSTBOX 221 221
S Cabinets over 39 have verticaldivider (price is included) and splitshelves
March 1, 2007 IS119
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6015 6015
Vanity Base Full Height Vanity Base Full Height
Drs-DrwrFronts Mel Ply
VBFH12 1-0 $ 325 $ 428
VBFH15 1-0 341 446
VBFH18 1-0 373 489
VBFH21 1-0 415 542
27VBFH24 2-0 467 608
27VBFH27 2-0 494 642
VBFH30 2-0 563 747
VBFH36 2-0 616 811
S 31 1/2 high x 21 deepFinished End veneer 86 86
S 31 1/2 high x 21 deep
S Two adjustable full depth shelvesFinished End HPL 45 45
S Two adjustable full depth shelvesFor each ROSDOD 171 171
For each ROSTBOX 221 221
6017 6017
Tall Vanity Base Full Height Tall Vanity Base Full Height
Drs-DrwrFronts Mel Ply
TVBFH12 1-0 $ 335 $ 440
TVBFH15 1-0 365 477
TVBFH18 1-0 402 525
TVBFH21 1-0 448 582
30 TVBFH24 2-0 512 664
TVBFH27 2-0 555 718
TVBFH30 2-0 608 800
TVBFH36 2-0 658 865
34 1/ hi h 21 dFinished End veneer 86 86
S 34 1/2 high x 21 deep
S Two adjustable full depth shelvesFinished End HPL 45 45
S Two adjustable full depth shelvesFor each ROSDOD 171 171
For each ROSTBOX 221 221
6020 6020
Three Drawer Vanity Base Three Drawer Vanity Base
Drs-DrwrFronts Mel Ply
VBDT12 0-3 $ 960 $ 1143
6 VBDT15 0-3 972 11576
7 1/VBDT18 0-3 1024 1225
7 1/2VBDT21 0-3 1072 1284
13 1/VBDT24 0-3 1108 1328
13 1/2VBDT27 0-3 1145 1375
VBDT30 0-3 1182 1422
S 31 1/2 high x 21 deep VBDT36 0-3 1255 1515
S Standard with cross rail between alldrawers
Finished End veneer 86 86drawers
Finished End HPL 45 45
March 1, 2007IS120
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6030 6030
Tall Three Drawer Vanity Base Tall Three Drawer Vanity Base
Drs-DrwrFronts Mel Ply
6 TVBDT12 0-3 $ 1007 $ 12016
TVBDT15 0-3 1023 1224
12 TVBDT18 0-3 1042 1247
TVBDT21 0-3 1087 130312
TVBDT24 0-3 1116 1339
TVBDT27 0-3 1145 1375
TVBDT30 0-3 1199 1443
S 34 1/2 high x 21 deepTVBDT36 0-3 1275 1539
S 34 1/2 high x 21 deep
S Standard with cross rail between all Finished End veneer 86 86S Standard with cross rail between alldrawers Finished End HPL 45 45
6040 6040
Tall Four Drawer Vanity Base Tall Four Drawer Vanity Base
Drs-DrwrFronts Mel Ply
6TVBD12 0-4 $ 1203 $ 1425
6
6TVBD15 0-4 1228 1457
6
6TVBD18 0-4 1248 1482
6TVBD21 0-4 1295 1542
12 TVBD24 0-4 1324 1578
TVBD27 0-4 1351 1612
TVBD30 0-4 1411 1688
S 34 1/2 high x 21 deep TVBD36 0-4 1481 1775S 34 1/2 high x 21 deep
S Standard with cross rail between all Finished End veneer 86 86S Standard with cross rail between alldrawers Finished End HPL 45 45
6050 6050
Vanity Sink Front Vanity Sink Front
4 1/4 Drs-DrwrFronts Mel Ply
6 VSF24 2-1 $ 323 $ 411
VSF30 2-1 354 448
21 24VSF36 2-1 418 527
21 , 24VSF42 2-1 454 573
VSFFLloosefloor 81 103
For tilt-outs to 42 , add: 66 66
S No shelf
S Floor shipped loose, if ordered
S Specify 31 1/2 (standard) or 34 1/2 (tall)
March 1, 2007 IS121
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6060 6060
Vanity Sink Base Vanity Sink Base
Drs-DrwrFronts Mel Ply
VSB12 1-1 $ 438 $ 553
VSB15 1-1 446 5636 VSB18 1-1 454 573
VSB21 1-1 462 581
21VSB24 2-1 469 591
21VSB27 2-1 491 621
VSB30 2-1 517 653
VSB33 2-1 559 706
VSB36 2-1 582 735
VSB39 2-1 619 782
VSB42 2-1 649 818
S 31 1/2 high x 21 deep Finished End veneer 86 86
S No shelf Finished End HPL 45 45
S For sink matting see catalog #3100 For tilt-outs to 42 , add: 66 66
S Sink bases over 42 wide have fullheight stile split bottom front rail and
For each ROSDOD 171 171height stile, split bottom front rail, and3/4 back; upcharge applies For each ROSTBOX 221 2213/4 back; upcharge applies
For full height doors and6 sink apron, add: 96 119
6070 6070
Tall Vanity Sink Base Tall Vanity Sink Base
Drs-DrwrFronts Mel Ply
TVSB12 1-1 $ 465 $ 588
TVSB15 1-1 473 601
6 TVSB18 1-1 481 6086TVSB21 1-1 489 618
TVSB24 2-1 496 628
24 TVSB27 2-1 540 680
TVSB30 2-1 564 715
TVSB33 2-1 587 742
TVSB36 2-1 605 763
TVSB39 2-1 638 805
S 34 1/2 high x 21 deep TVSB42 2-1 673 85034 /2 high x 21 deep
S No shelf Finished End veneer 86 86No shelf
S For sink matting see catalog #3100 Finished End HPL 45 45For sink matting see catalog #3100
S Sink bases over 42 wide have full For tilt-outs to 42 , add: 66 66Sink bases over 42 wide have fullheight stile, split bottom front rail, and3/ back; upcharge applies
For each ROSDOD 171 1713/4 back; upcharge applies
For each ROSTBOX 221 221
For full height doors and6 sink apron, add: 96 119
March 1, 2007IS122
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6080 6080
Vanity Sink Drawer Vanity Sink Drawer
A B CVSD 36 9 18 9
Drs-DrwrFronts Mel Ply
6VSD-36 9 18 9VSD-42 9 24 9 VSD36 2-3 $ 962 $ 1168
C6 VSD-42 9 24 9
VSD42 2-3 1043 1272
B21 VSD48 4-3 1156 1413
A
21VSD60 4-3 1496 1842A
Finished End veneer 86 86
Finished End HPL 45 45
For tilt-outs to 42 , add: 66 66
S 31 1/2 high x 21 deep
S VSD48 and VSD60 each have one fulldepth adjustable shelf each side
A
B
C
A B CVSD-48 12 24 12VSD-60 15 30 15
6090 6090
Tall Vanity Sink Drawer Tall Vanity Sink Drawer
A B CDrs-DrwrFronts Mel Ply
6
A B CTVSD-36 9 18 9TVSD-42 9 24 9 TVSD36 2-3 $ 1052 $ 12816
CTVSD-42 9 24 9
TVSD42 2-3 1134 1386
B TVSD48 4-3 1248 152924
A TVSD60 4-3 1590 1961A
Finished End veneer 86 86
Finished End HPL 45 45
For tilt-outs to 42 , add: 66 66
S 34 1/2 high x 21 deep
S TVSD48 and TVSD60 each have onefull depth adjustable shelf each side
A
B
C
A B CTVSD-48 12 24 12TVSD-60 15 30 15
March 1, 2007 IS123
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6100 6100
Combination Bowl Drawer Stack Vanity Combination Bowl Drawer Stack Vanity
A BCVD-24FD 16 8
Drs-DrwrFronts Mel PlyCVD-24FD 16 8
CVD-30FD 20 10CVD 33FD 22 11
CVD24FD 1-3 $ 1007 $ 1225CVD-33FD 22 11CVD-36FD 24 12 CVD30FD 1-3 1188 1454CVD-36FD 24 12CVD-42FD 28 14 CVD33FD 1-3 1280 1569
B A B CVD36FD 2-3 1305 1598
AA B
CVD-36 24 12CVD 42 28 14
CVD36 * 2-4 1383 1675CVD-42 28 14CVD-48 32 16 CVD42FD 2-3 1448 1779
B
CVD-48 32 16CVD42 * 2-4 1525 1856
B A B CCVDD 48 12 24 12
CVD48 * 2-4 1666 2034
ACVDD-48 12 24 12CVDD-54 13 1/2 27 13 1/2 CVDD48 2-7 2152 2578A CVDD-54 13 /2 27 13 /2CVDD-60 15 30 15CVDD 72 18 36 18
CVDD54 2-7 2306 2759CVDD-72 18 36 18
CVDD60 2-7 2471 2982
S 31 1/2 high x 21 deep CVDD72 2-7 2665 3224S 31 /2 high x 21 deep
S No shelves6 Finished End veneer 86 86S No shelves
S Specify drawer stack left or right; unitC
6
7 1/2 Finished End HPL 45 45S Specify drawer stack left or right; unitwill be shipped as shown if notspecifiedB 13 1/2
2
For tilt-outs to 42 , add: 66 66ppspecified
S Standard with cross rail between alldrawers
S All above units will not accommodatedouble bowl sink
S FD = full width false front
A
B 13 1/2* 36 , 42 and 48 require offset bowl.
6120 6120
Tall Combination Bowl Drawer Stack Vanity Tall Combination Bowl Drawer Stack Vanity
A BTCVD 24FD 16 8
Drs-DrwrFronts Mel Ply
TCVD-24FD 16 8TCVD-30FD 20 10 TCVD24FD 1-4 $ 1353 $ 1636TCVD-30FD 20 10TCVD-33FD 22 11TCVD 36FD 24 12
TCVD30FD 1-4 1533 1865TCVD-36FD 24 12TCVD-42FD 28 14 TCVD33FD 1-4 1622 1978
BTCVD-42FD 28 14
A BTCVD36FD 2-4 1647 2008
A A BTCVD-36 24 12 TCVD36 * 2-5 1724 2086TCVD-36 24 12TCVD-42 28 14TCVD 48 32 16
TCVD42FD 2-4 1790 2188
BTCVD-48 32 16
A B CTCVD42 * 2-5 1867 2266
A
BA B C
TCVDD-48 12 24 12 TCVD48 * 2-5 2173 2649A TCVDD-48 12 24 12
TCVDD-54 13 1/2 27 13 1/2TCVDD 60 15 30 15
TCVDD48 2-9 2744 3280TCVDD 54 13 /2 27 13 /2TCVDD-60 15 30 15TCVDD-72 18 36 18 TCVDD54 2-9 2864 3431TCVDD-72 18 36 18
TCVDD60 2-9 3040 3652
S 34 1/2 high x 21 deep6TCVDD72 2-9 3104 3732S 34 1/2 high x 21 deep
S No shelvesC66 Finished End veneer 86 86S No shelves
S Specify drawer stack left or right; unitB
C 66 Finished End HPL 45 45S Specify drawer stack left or right; unit
will be shipped as shown if notf
B12 For tilt-outs to 42 , add: 66 66will be shipped as shown if not
specified
S Standard with cross rail between alldrawers
S All above units will not accommodatedouble bowl sink
S FD = full width false front
A
12* 36 , 42 and 48 require offset bowl.
March 1, 2007IS124
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6130 6130
Double Bowl Drawer Stack Vanity Double Bowl Drawer Stack Vanity
6A B C
DVD 60 24 12 24
Drs-DrwrFronts Mel Ply
216
A B CDVD-60 24 12 24DVD-72 27 18 277 1/2
DVD60 4-5 $ 1746 $ 2134
C21
1
DVD-72 27 18 277 1/2DVD72 4-5 1837 2249
B13 1/2 Finished End veneer 86 86
A
B
Finished End HPL 45 45A
For tilt-outs to 42 , add: 66 66
S 31 1/2 high x 21 deep
S Standard with cross rail between alldrawers
S No shelves
S These units will accommodate doublebowl sink
6135 6135
Tall Double Bowl Drawer Stack Vanity Tall Double Bowl Drawer Stack Vanity
6 A B CTDVD
Drs-DrwrFronts Mel Ply
6
6
A B CTDVD-60 24 12 24TDVD-72 27 18 27
TDVD60 4-6 $ 2039 $ 2481C
624
6 TDVD-72 27 18 27TDVD72 4-6 2173 2649
B
6
12Finished End veneer 86 86
A
B12
Finished End HPL 45 45AFor tilt-outs to 42 , add: 66 66
S 34 1/2 high x 21 deep
S Standard with cross rail between alldrawers
S No shelves
S These units will accommodate doublebowl sink
6140 6140
84 High Vanity Tall Utility 84 High Vanity Tall Utility
Drs-DrwrFronts Mel Ply
VTU15 2-0 $ 976 $ 1274
VTU18 2-0 1040 1355
VTU21 2-0 1111 1449
VTU24 4-0 1260 1645
VTU27 4-0 1376 1795
VTU30 4-0 1496 1950
VTU36 4-0 1680 2190
Finished End veneer 164 164
Finished End HPL 96 96
S Lower Opening:one full depth adjustable shelf
S Upper Opening:four full depth adjustable shelves
27 Specify for 83 high, no charge.
March 1, 2007 IS125
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6150 6150
84 High Tall Vanity Tall Utility 84 High Tall Vanity Tall Utility
Drs-DrwrFronts Mel Ply
TVTU15 2-0 $ 976 $ 1274
TVTU18 2-0 1040 1355
TVTU21 2-0 1111 1449
TVTU24 4-0 1260 1645
TVTU27 4-0 1376 1795
TVTU30 4-0 1496 1950
TVTU36 4-0 1680 2190
30Finished End veneer 164 164
S Lower Opening:two full depth adjustable shelves
30Finished End HPL 96 96
two full depth adjustable shelves
S Upper Opening:three full depth adjustable shelves
Specify for 83 high, no charge.
6160 6160
84 High Vanity Tall Drawer 84 High Vanity Tall Drawer
Drs-DrwrFronts Mel Ply
VT3D15 1-3 $ 1755 $ 2207
VT3D18 1-3 1825 2298
VT3D21 1-3 1887 2382
VT3D24 2-3 2039 2577
VT3D27 2-3 2155 2730
VT3D30 2-3 2270 2880
VT3D36 2-3 2390 3036
67 1/
Finished End veneer 164 1647 1/2 Finished End HPL 96 96
S Upper Opening:four full depth adjustable shelves
S Standard with cross rail between alldrawers
13 1/2 Specify for 83 high, no charge.
6170 6170
84 High Tall Vanity Tall Drawer 84 High Tall Vanity Tall Drawer
Drs-DrwrFronts Mel Ply
TVT4D15 1-4 $ 2088 $ 2616
TVT4D18 1-4 2157 2706
TVT4D21 1-4 2217 2785
TVT4D24 2-4 2370 2982
TVT4D27 2-4 2487 3134
6TVT4D30 2-4 2607 3290
66 TVT4D36 2-4 2724 344366 Finished End veneer 164 164
S Upper Opening:12
6
Finished End HPL 96 96S Upper Opening:three full depth adjustable shelves
S Standard with cross rail between alldrawers
12Specify for 83 high, no charge.
March 1, 2007IS126
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6180 6180
Tri-View Mirror Tri-View Mirror
S Includes natural finished interior andIDC
S Includes natural finished interior andboth ends finished, no charge TV2430 $ 703both ends finished, no charge
S Traditional cabinet construction TV3030 703S Traditional cabinet construction
S Standard Lancaster wood door frame TV3630 762S Standard Lancaster wood door frameonly (2 1/4 stiles and rails) TV4830 941y ( /4 )
S Box depth: 3 3/4S Cabinet depth: 4 1/2S No dimensional modifications
S Edge profile matches order
S Shipped with mirror installed
S Three adjustable shelves
S Rough Openings:TV2430: 23 x 29TV3030: 29 x 29TV3630: 35 x 29TV4830: 47 x 29
Traditional cabinet construction.
6200 6200
Mirrored Medicine Cabinet Mirrored Medicine Cabinet
S Includes natural finished interior and bothIDC
S Includes natural finished interior and bothends finished, no charge MC1830 $ 553ends finished, no charge
S Traditional cabinet construction MC2430 703
S Standard Lancaster wood door frame only
S Three adjustable shelves.
S Box depth: 3 3/4S Cabinet depth: 4 1/2S Edge profile matches order
S Shipped with mirror installed
S If dimensions are modified, mirrors are notshipped
S Special pin hinge only
S Rough Openings:MC1830: 17 x 29MC2430: 23 x 29
Traditional cabinet construction.
6210 6210
Wall Mount Bracket Wall Mount Bracket
Mel Ply
WMB21L laminate $ 70 N/A
WMB24L laminate 70 N/A
WMB21 solid wood 173 $ 173
WMB24 solid wood 173 173
WMB21V veneer 134 146
23 WMB24V veneer 134 146
S Specify loose, attached left or WMB21H HPL 91 140Specify loose, attached left orattached right WMB24H HPL 91 140
S When attached, cabinet width remainsthe same
S If loose, will be 7/8 deeper
Add to price of cabinet.
March 1, 2007 IS127
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6220 6220
Vanity Tapered Leg Vanity Tapered Leg
Mel Ply
VTLL laminate $ 114 N/A
VTLV veneer 193 $ 212
VTLH HPL 141 203
VTL solid wood 230 230
S Specify loose, attached left orattached right
S When attached, cabinet width remainsthe same
S If loose, will be 7/8 deeper
S Specify for straight leg, no charge
31 1/2
Add to price of cabinet.
6230 6230
Vanity Wall Cabinet Vanity Wall Cabinet
8Drs-DrwrFronts Mel Ply
VW1530 1-0 $ 264 $ 374
VW1830 1-0 293 415
VW2130 1-0 322 458
Finished End veneer 63 63
Finished End HPL 32 32
S Two adjustable shelves
6240 6240
Wall Toilet Cabinet Wall Toilet Cabinet
8 LaminateDrs-DrwrFronts Mel Ply
24 , 27 WT2439 2-0 $ 666 N/A
WT2739 2-0 666 N/A
24 Veneer
WT2439V 2-0 944 $ 1075
WT2739V 2-0 944 1075
8HPL
8
39WT2439H 2-0 944 1075
39WT2739H 2-0 944 1075
S Code reflects overall cabinetconstruction
S Bar Material:Veneer cabinet: solid woodLaminate/HPL cabinet: clear plexiglass
March 1, 2007IS128
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6250 6250
Pull Out Wire Hamper Pull Out Wire Hamper
IDC
VH15 $ 201
VH18 201
S Chrome
S Code reflects cabinet size thehamper fits in
S Available in standard vanity or fullheight vanity
S Not available in 18 deep cabinet
S Feeny item
Add to price of cabinet.
6260 6260
Clothes Chute Door And Frame Clothes Chute Door And Frame
12 15
Drs-DrwrFronts IDC
12 , 15CC12 1-0 $ 153
CC15 1-0 164
S Traditional cabinet construction
S Chute Opening: 3 less than framedimension
S No dados on back of frame unlessspecified
12 , 15
Add door style charge.
6270 6270
File Drawer File Drawer
Dodd’sDovetail
Drs-DrwrFronts Mel Ply
SFD16 0-3 $ 1295 $ 1542
SFD19 0-3 1295 1542
DFD16 0-2 1276 15176 DFD19 0-2 1276 1517
7 1/2 Tandembox
SFD18 0-3 1325 1572
D dd’ D t il id t f ll13 1/2 SFD21 0-3 1325 1572
S Dodd’s Dovetail: side-mount fullextension drawer guides on file
DFD18 0-2 1306 1548extension drawer guides on filedrawers only; uses metal hanging13 1/2
DFD21 0-2 1306 1548drawers only; uses metal hangingstrip inserted into a dado on top ofdrawer box
13 1/2Finished End veneer 86 86
drawer box
S Tandembox: uses Blum Metabox1Finished End HPL 45 45
S Tandembox: uses Blum Metaboxhanging system
S Dimension modifications will affectdrawer sizes; specify preference
S 21 deep standard, 18 or 24 deep,no charge
S For lateral file drawers in standardbase cabinets, see catalog #2590
13 1/2 To make SFD or DFD into lateral files, add $47per file drawer.
March 1, 2007 IS129
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6275 6275
Four Drawer File Cabinet Four Drawer File Cabinet
Dodd’sDovetail
Drs-DrwrFronts Mel Ply
QFD16 0-4 $ 2667 $ 3261
QFD19 0-4 2667 3261
Tandembox
QFD18 0-4 2727 332213 1/2 QFD21 0-4 2727 3322
58 1/2Finished End veneer 164 164
S Dodd’s Dovetail: side-mount fullt i d id t l
58 1/213 1/2 Finished End HPL 96 96
extension drawer guides; uses metalhanging strip inserted into a dado ontop of drawer box
S Tandembox: uses Blum Metaboxhanging system
S Dimension modifications will affectdrawer sizes; specify preference
S 21 deep standard, 18 or 24 deep,no charge
S Includes flush finished top, and bothsides extended down with flush toe
13 1/2
13 1/2
13 /2To make QFD into lateral files, add $47 per filedrawer.
6280 6280
Desk Drawer Desk Drawer
Drs-DrwrFronts Mel Ply
DD24 0-1 $ 455 $ 552
DD27 0-1 469 570
DD30 0-1 474 575
DD33 0-1 483 586
DD36 0-1 505 614
S Height of drawer unit is 6Finished End veneer 57 57
S Height of drawer unit is 6
S 21 deep standard 18 or 24 deepFinished End HPL 32 32
S 21 deep standard, 18 or 24 deep,no charge6
6290 6290
Mirror Frame Mirror Frame
Per Lin. Ft. IDC
MIRFR Lancaster Square style $ 15
Specify MIRFRSQ Seattle style 20
S Mirror not included
S Specify routed edge profile
S Constructed with 2 1/4 wood doorframe material
S Specify for Lancaster inside profile orSeattle (square) inside edge
Specify
p y
Add up perimeter dimensions to calculate linealfootage. Round up to next lineal foot.
March 1, 2007IS130
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6320 6320
Pencil Drawer Pencil Drawer
Drs-DrwrFronts Mel Ply
S Dodd’s Dovetail: TandemPlus guides
T d b d ill BlPD24 0-1 $ 455 $ 552
S Tandembox order will use BlumMetabox PD27 0-1 469 570Metabox
S 21 deep standard, 18 or 24 deep, PD30 0-1 474 575S 21 deep standard, 18 or 24 deep,no charge PD33 0-1 483 586g
S Height of drawer unit: 4 PD36 0-1 505 614g
S Unit has a full top and no bottom4 Finished End veneer 57 574
Finished End HPL 32 32
6330 6330
Pencil Drawer With Adapter Brackets Pencil Drawer With Adapter Brackets
S 21 deep standard, 18 or 24 deep,Drs-DrwrFronts Mel Ply21 deep standard, 18 or 24 deep,
no charge PDA24 0-1 $ 188 $ 254S Blum Metabox only; available whiteonly
PDA27 0-1 188 254only
S Height of drawer unit: 3PDA30 0-1 204 272
S Height of drawer unit: 3
S Mounts to bottom of countertopPDA33 0-1 204 272
S Mounts to bottom of countertopPDA36 0-1 311 407
6340 6340
Vanity Fillers Vanity Fillers
Fillers Mel Ply
VF3L laminate $ 66 N/A
VF3V veneer 93 $ 103
VF3H HPL 90 98
VF6L laminate 74 N/A
VF6V veneer 106 117
VF6H HPL 102 112
Fillers with One Finished End Panel
VFF3 laminate 232 N/A
VFF3V veneer 242 268
VFF3H HPL 232 257
VFF6 laminate 243 N/A
VFF6V veneer 253 278
VFF6H HPL 243 268S Shipped assembled Fillers with Two Finished End PanelsS Standard at 21 7/8 deep if no accent
t i d dVFF3D laminate 376 N/A8 p
strip ordered
S if d l tt h d l ftVFF3DV veneer 391 429
S Specify end panel attached left orright
VFF3DH HPL 376 413right(attached right shown) VFF6D laminate 383 N/A(attached right shown)
VFF6DV veneer 398 439
VFF6DH HPL 383 422
March 1, 2007 IS131
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
VANITY CABINETS6345 6345
3 Vanity Fillers --Veneer With Half Spool & Rod Post Attached 3 Vanity Fillers --Veneer With Half Spool &Rod Post Attached
3 Fillers Mel Ply
VF3VSR veneer $ 357 $ 367
VF3VSRR veneer 357 367
3 Fillers with One Finished End Panel
VFF3VSR veneer 506 532
VFF3VSRR veneer 506 532
Specify 3 Fillers with Two Finished End Panels
VFF3DVSR veneer 655 693
VFF3DVSRR veneer 655 693
S Flush toe standard
S Shipped assembled
S Standard at 21 deep
S Specify end panel attachedleft or right(attached right shown)
S 3 Half Spool & Rod Postattached flush with edges offiller, 8 high top and bottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
3 wide1 1/2
6350 6350
Vanity Accent Strips Vanity Accent Strips
Accent Strip IDC
AS3GE geneva laminate $ 17
AS3 wood 92
AS3H HPL 89
AS3F textured foil 92
AS3FG high gloss foil 124
AS6GE geneva laminate 28
AS6 wood 116
AS6H HPL 111
AS6F textured foil 114
S To be used with filler to create a uniform front, AS6FG high gloss foil 192To be used with filler to create a uniform front,flush with doors and drawers
Shi d l f fi ld i t ll tiAccent Strip with Three Flutes
S Shipped loose for field installation AS3HF wood 200S Banded or shaped one long and two shortedges standard specify for banded or shaped
AS6HF wood 222edges standard, specify for banded or shapedfour edges for accents over 2 1/2 wide AS3FF textured foil 122four edges for accents over 2 1/2 wide
S Accent strips with flutes will have flutes stopAS6FF textured foil 175
S Accent strips with flutes will have flutes stop1 1/2 from top and bottom unless specifiedwith print
Accent Strip with Three Flutes, OneGroove, And One Circle Routewith print
S Accent strips with flutes, grooves, and circle AS3HFC wood 247S Accent strips with flutes, grooves, and circleroutes will have 1 1/2 between them and the
d b l ifi d i h iAS6HFC wood 269outes a e /2 bet ee t e a d t e
top and bottom unless specified with print AS3FFC textured foil 144S Foil wrapped accent strips with flutes grooves,and/or circle routes are available in the same
AS6FFC textured foil 196gand/or circle routes are available in the samefoil as the foil wrapped doors
March 1, 2007IS132
Standard Vanities 21 Deep,Specify for 18 Deep, No Charge
MISCELLANEOUS ACCESSORIES
7000 7000
Standard Wood Valances Standard Wood Valances
3 1/2 High IDCV27 $ 107V30 107V36 107V48 133
3 - 6 V60 1513 - 6V72 172V84 234V96 265
5 5 High
ScallopVX27 122
ScallopVX30 122VX36 122VX48 147
Curve VX60 175CurveVX72 204VX84 274
SVX96 310
Straight 9 1/2 HighVXX27 166VXX30 166
S Solid hardwoodVXX36 166
S Solid hardwood
S Specify scallop curve or straightVXX48 211
S Specify scallop, curve, or straight
M b d d t t l thVXX60 250
S May be ordered cut to length,no charge
VXX72 290no charge VXX84 375
VXX96 424VAX attach to cabinet 57DECOR decorative edge 45BEAD beaded edge 45
7005 7005
Arched Valance Arched Valance
Solid Wood (5 High) IDC
VX30A $ 122
VX36A 122
VX48A 147
VX60A 175
Foil (5 High)
VX30AF 77
VX36AF 86
VX48AF 105
VX60AF 124
5Satin and Woodgrain Foil (5 High)
2 1/25
VX30AF 77/2
VX36AF 86
3/4VX48AF 1053/4VX60AF 124
S Can be ordered cut to length, nocharge; radius of arch changes
IS133March 1, 2007
MISCELLANEOUS ACCESSORIES7006 7006
Laminate/Veneer Valance Laminate/Veneer Valance
Laminate (4 High) Mel Ply
V48 $ 34 N/A
V60 41 N/A
V72 49 N/A
V84 58 N/A
V96 63 N/A
Veneer (4 High)
V48V 83 $ 91
V60V 106 117
V72V 122 134
V84V 143 158
V96V 161 175
HPL (4 High)
V48H 60 88
V60H 82 112
V72H 98 128
V84H 118 152
V96H 136 169
Laminate (9 1/2 High)
VX48 42 N/A
VX60 51 N/A
VX72 61 N/A
VX84 71 N/A
S Valances banded one long edge VX96 81 N/AS Valances banded one long edgeVeneer (9 1/2 High)
VX48V 123 136
VX60V 157 171
VX72V 185 201
VX84V 217 239
VX96V 246 271
HPL (9 1/2 High)
VX48H 85 131
VX60H 112 165
VX72H 134 194
VX84H 159 229
VX96H 183 260
7007 7007
High Gloss Foil Valance High Gloss Foil Valance
3 High IDC
V96FG $ 169
S Valances shaped one long edge withsame edge as high gloss door edge
IS134 March 1, 2007
MISCELLANEOUS ACCESSORIES7010 7010
Lace Valance Lace Valance
5 High Patterns IDC
72VX27L 2 $ 199
72VX30L 4 199
VX36L 7 199
VX48L 9 223
VX60L 11 251
60 VX72L 13 281
VX84L 14 351
VX96L 14 386
36
30
S Solid hardwoodValance Length Pattern Length
27 6 3/430 13 1/236 2448 3160 3872 44 3/484 48 1/496 48 1/4
S Pieces can be trimmed to within 1 1/4of cut pattern on each end
S More than 14 patterns is not availableon one board
7015 7015
Barrington Valance Barrington Valance
5 High Patterns IDC
9 VX27B 1 $ 199927
VX30B 2 199
16 1/VX36B 3 199
16 1/230 VX48B 4 22330
VX60B 5 25124
36 VX72B 6 28136VX84B 7 351
31 1/2VX96B 8 386
S Solid hardwood
S Pieces can be trimmed to within 1 1/4of cut pattern on each end
31 1/248
3960
46 1/272
5484
61 1/296
IS135March 1, 2007
MISCELLANEOUS ACCESSORIES7020 7020
Laminate/Veneer Soffit Closure Panel Laminate/Veneer Soffit Closure Panel
Laminate Mel Ply
SP48L $ 52 N/A
SP60L 66 N/A
SP72L 80 N/A
SP84L 106 N/A
SP96L 119 N/A
Veneer
SP48V 123 $ 136
SP60V 147 163
SP72V 167 185
SP84V 224 246
SP96V 253 278
HPL
S 12 deep standard SP48H 73 131S 12 deep standard(12 3/4 deep with valance attached) SP60H 92 156( /4 p )
SP72H 111 178
SP84H 149 236
SP96H 165 268
Valance is not included in price.
7030 7030
Fluting Fluting
IDC
FLUTENAR 1/4 wide $ 37
FLUTEWD 7/16 wide 37
S 7/16 or 1/4 wide flutes routed intosolid stock, specify by code
S Specify number of flutes and length(three flutes shown)
S Standard with equal stops
For staggered flutes, add $45 per group.
Add to price of material.
7040 7040
Circle Routes Circle RoutesCR1
CIRCLE ROUTETh ill b d i
CR2CIRCLE ROUTE W/GROOVE
Th ill b d i i f lid
CR3CIRCLE ROUTE BLOCK IDCCIRCLE ROUTE
The pattern will be routed into apiece of solid stock; the location ofthe route and material size must be
CIRCLE ROUTE W/GROOVEThe pattern will be routed into a piece of solidstock and a groove will be placed into the solidstock below the route; the location of the route
CIRCLE ROUTE BLOCKThe pattern will be routed into one piece ofsolid stock up to 6 x 6 ; the material size
t b ifi dCR1 $ 24p ;
the route and material size must bespecified.
g pstock below the route; the location of the route,groove location, and material size must bespecified
solid stock up to 6 x 6 ; the material sizemust be specified.
CR2 47specified.
CR3 47
S 2 1/8 diameter circle route will be usedwherever it will fit as standard
S 1 1/2 diameter circle route will be usedwherever the 2 1/8 circle route will not fit
S Specify for all 1 1/2 diameter circle routes tobe used, no charge
If edge profile is desired, add decor charge.
IS136 March 1, 2007
MISCELLANEOUS ACCESSORIES7060 7060
Wood Moldings Wood MoldingsPer Lineal Foot
Code Description. Price
MBASE Base Shoe mldg 0 - 8 $ 2.50
5
MBAT Batten mldg 0 - 8 2.50
1.5
MBULL 1 1/2 Bullnose mldg 0 - 8 19.00
MBASEMCEIL* Ceiling Cove mldg 0 - 8 3.50
MBASEo m c h a
MBATo m c MCEIL
0.8750.75 MCHAIR2* 3/4 Chair Rail mldg 0 - 8 9.40o m c h a o m c MCEIL
o m c h
0.875
1.625
0.75
MCHAIR2X 3/4 Chair Rail mldg 8 - 10 14.10o m c h1.625
MBULL MCCOVE 3/4 Convex Cove mldg 0 - 8 6.50MBULLo m c h
120_MCOVE Cove mldg 0 - 8 2.50
2.25
120_MCROWNB Beaded Crown mldg 0 - 8 25.00
2.2
MCROWNED Edgewater Crown mldg 0 - 8 25.00
MCCOVE 1.75 MCROWNSP Springdale Crown mldg 0 - 8 25.00MCCOVEo m c h aMCHAIR2(X) 3
1.75
MCROWNENG Englebrook Crown mldg 0 - 8 25.00o m c h aMCOVE
MCHAIR2(X)o m c h a
MCROWNB MCROWNC Convex Crown mldg 0 - 8 quoteMCOVEo m c h a
MCROWNBo m c h a MCROWN2* 3 1/8 Sm. Crown mldg 0 - 8 13.00
120_MCROWN2X 3 1/8 Sm. Crown mldg 8 - 10 20.00
5
3
120_ 2 120_
2.75 MCROWN8* Shaker Crown mldg 0 - 8 13.00
1
0.52
.625120_ MCROWN8X Shaker Crown mldg 8 - 10 19.50
0.625
12.6
MCROWN9* Lg. Shaker Crown mldg 0 - 8 19.00
2 75
0.6253.1875
MCROWNED3 MCROWN9X Lg. Shaker Crown mldg 8 - 10 28.50
2.75
MCROWNCMCROWNED
o m c a MCROWNSP3
3MCROWNS Straight Crown mldg 0 - 8 25.00MCROWNC
o m c ho m c a MCROWNSP
o m c MCROWNENG3
MCROWN6* 4 Insert Crown mldg 0 - 8 19.00o m c MCROWN6X 4 Insert Crown mldg 8 - 10 28.50
3.16 MCROWN4* 4 1/2 Lg. Crown mldg 0 - 8 19.00
MCROWN4X 4 1/2 Lg. Crown mldg 8 - 10 28.50
2.5
16
MCROWNM* 1 5/8 Mini Crown mldg 0 - 8 9.40
25
3.16
MCROWNMX 1 5/8 Mini Crown mldg 8 - 10 14.10
0.555
135_ MCROWNL Light Rail Crown mldg 0 - 8 13.000
MCROWNLX Light Rail Crown mldg 8 - 10 19.50
MCROWN8(X) 1.625MCROWN2(X) MDEC 2 1/2 Decor Edge mldg 0 - 8 15.00MCROWN8(X)
o m c h a3.57
1.625MCROWN2(X)o m c h a MCROWN9(X) * Available With Molding Return Attachedo m c h a
MCROWNSo m c h a
MCROWN9(X)o m c h a MRET 3/4 x 1 1/2 Return Attached 0 - 8 6.40
o m c h aMRET3 3/4 x 3 Return Attached 0 - 8 15.00
Molding Applied To Cabinet
MLDGA Molding applied per each miter 44.00
MCROWNM(X)o m c h a
1
0.5
1.625
0.75
MCROWNL(X)o m c h
8 lengths only
MDEC(Specify Edge Profile)
o m c h a
MCROWN4(X)o m c h a
MCROWN6(X)o m c h a
Add to price of molding.
Moldings that are available > 8 - 10 are also avaliable upto 12 (code ends with an “X”) call for pricing and leadtime.
Bold lines represent finished area; double the listed priceif specifying finish all.
KEY: o = oakm = maplec = cherryh = hickorya = alder
IS137March 1, 2007
MISCELLANEOUS ACCESSORIES7060 (cont’d) 7060
Wood Moldings Wood MoldingsPer Lineal Foot
3/8 348Code Description. Price3/8
3/4
.348
MDENT1 3/4 Dentil mldg (8 pieces only) $ 19.00
MESS
/4
Partial FaceMDENT1.811 MESS Essex mldg 0 - 8 2.50
MESSo m c a
Partial FaceViewo m c
8 lengths only MFB2* 3 1/2 Furn Base mldg 0 - 8 13.008 lengths only
MFB2X 3 1/2 Furn Base mldg 8 - 10 19.50
MFB4* 4 1/2 Furn Base mldg 0 - 8 15.00
MFB4X 4 1/2 Furn Base mldg > 8 - 10 22.50
MHT* Hardwood Edge Cove mldg 0 - 8 3.50
MFB2MFB4
o m c h aMHTS* Hardwood Edge Sq. mldg 0 - 8 3.50MFB2
o m c h ao m c h a
MINSET 2 1/4 Inset mldg 0 - 8 11.00
MTLB Light Baffel-Solid mldg 0 - 8 15.00
MLDG135 135_ Corner mldg 0 - 8 19.00
MOSC Outside Corner mldg 0 - 8 2.50MHT
o m c h a MHTSS
MINSETo m c h a
MLOSC 1x1 Lg. Outside Corner mldg 0 - 8 3.50o m c h a
Squareo m c h a
o m c h aPRAILP 5 Plate Rail mldg 0 - 8 40.00o m c h aMPRO Provincial Overlay mldg 0 - 8 2.50
MRISE3 3 High Sq. Riser w/ret 0 - 8 21.00
MTLBMRISE3DEC 3 High Dec. Riser w/ret 0 - 8 21.00
MTLBo m c h a MOSC MLOSC
MRISE6 6 High Sq. Riser w/ret 0 - 8 29.00o m c h aMLDG135(135_)
MOSCo m c h a
MLOSCo m c h MRISE6DEC 6 High Dec. Riser w/ret 0 - 8 29.00
(135_)o m c a MROPE Rope mldg 3/4 x 3/8 (8 pieces only) 9.40o m c a
MRSB2 1 5/8 Stop mldg 0 - 8 3.60
MSCB Scribe mldg 0 - 8 2.50
MPRO MLSCB 1 1/4 Lg. Scribe mldg 0 - 8 5.70
PRAILP
o m c aMSQSOF Sq. Soffit mldg 3/4 x 3/4 0 - 8 2.50
PRAILPo m c a MLDGT T mldg 0 - 4 only 2.50o m c a
* Available With Molding Return Attached
MRET 3/4 x 1 1/2 Return Attached 0 - 8 6.40
MRET3 3/4 x 3 Return Attached 0 - 8 15.00
Molding Applied To Cabinet
MRISE3 MRISE3DECMLDGA Molding applied per each miter 44.00
MROPEo m c h
8 lengths only
MRSB2(1 5/8 )o m c h a
MSCB(11/16 bevel)o m c h a
MLSCB(1 1/4 radius)
o m c hMSQSOFo m c a
MLDGTo m c a
0 - 4 lengths only
MRISE3o m c h a
MRISE3DECo m c h a MRISE6
o m c h aMRISE6DECo m c h a
Add to price of molding.
Moldings that are available > 8 - 10 are also avaliable upto 12 (code ends with an “X”) call for pricing and leadtime.
Bold lines represent finished area; double the listed priceif specifying finish all.
KEY: o = oakm = maplec = cherryh = hickorya = alder
IS138 March 1, 2007
MISCELLANEOUS ACCESSORIES7062 7062
Wood Molding Configuration Ideas Wood Molding Configuration Ideas
Price Individual Moldings Per Lineal FootFor molding prices, see #7060For solid stock prices, see #7100 inTraditional catalog
Molding Configuration AInset Molding1 1/2 Solid StockInsert CrownRope
Molding Configuration A Molding Configuration B
Molding Configuration B3/4 Chair Rail3 1/2 Solid Stock3/4 Chair Rail
Molding Configuration A Molding Configuration BMolding Configuration C3 1/2 Furniture BaseInsert Crown3/4 Dentil
Molding Configuration DRope3 1/2 Solid StockRopeLarge Crown
Molding Configuration EMini CrownHardwood Edge SquareMini Crown
Molding Configuration C Molding Configuration D
Molding Configuration F3/4 Chair Rail3 1/2 Solid StockSmall Crowng g g g
Molding Configuration G2 1/4 Solid Stock with Beaded EdgeInsert CrownRope
Molding Configuration E
Molding Configuration F
Molding Configuration G
For 1 1/2 wide molding return, add $6.40 perlineal foot.
For 3 wide molding return, add $15 per linealfoot.
For moldings over 8 long, add 50%, callfactory for availability.
Moldings are shipped separately for fieldinstallation.
IS139March 1, 2007
MISCELLANEOUS ACCESSORIES7065 7065
Foil Wrapped Moldings Foil Wrapped Moldings
Per Ln. Ft. IDC
#1408
Textured White, Cream,and Designer Almond Foil(8 Piece Only)
#1408Scribe Colony #1304 $ 10.25Scribe
Scribe #1408 4.63
Windsor #1307 9.25#1304Colony
#745 #749 Woodgrain FoilColony #749
High Gloss Foil Wrapped Moldings Colony #1304 11.50
#1307
High Gloss Foil Wrapped MoldingsScribe #1408 5.50
#1307Windsor Windsor #1307 10.25Windsor
Foil Wrapped MoldingsSatin Foil
S Available in 96 lengths only
Foil Wrapped MoldingsColony #1304 14.88
S Available in 96 lengths only
S Available in most of the same foils asScribe #1408 8.25
S Available in most of the same foils asthe foil wrapped doors Windsor #1307 13.00the foil wrapped doors
S Additional lead times may apply as High Gloss FoilS Additional lead times may apply asthese are purchased moldings #745 33.00p g
#749 39.00
7067 7067
Laminate Moldings Laminate Moldings
Laminate Soffit (Traditional)(3/4 x 1 1/4 ) IDC
0 - 8 per ln ft $ 1.70
HPL Soffit (Traditional)(3/4 x 1 1/4 )
L M ldi0 - 8 per ln ft 2.20
L Molding 12 outside radius 61.00
12 inside radius 61.00
Straight MoldingStraight Molding(3 pieces stacked) Laminate Light Baffle
(3/4 x 2 )
S ti Vi S ti Vi f0 - 8 per ln ft 4.10
Section Viewof Light Baffle(3/4 x 2 )
Section View ofSoffit Molding(3/4 x 1 1/4 )
HPL Light Baffle(3/4 x 2 )(3/4 x 2 ) (3/4 x 1 1/4 )0 - 8 per ln ft 10.00
12 outside radius 61.00
Soffit 12 inside radius 61.00
Cabinet
SoffitHPL Straight Molding
Cabinet0 - 8 per ln ft 21.00
Cabinet HPL L-MoldingCabinet0 - 8 per ln ft 48.00
8 maximum length.
IS140 March 1, 2007
MISCELLANEOUS ACCESSORIES7070 7070
Special Order Moldings Special Order Moldings
Per Lineal Foot IDC
#6 8 piece $ 16
2 9/163/4 1 1/4 1 1/4
#13 8 piece 82 9/16
/4 1 1/4
5/ 5/
1 1/4#14 8 piece 8
21/32 3/45/16
5/16 #11 8 piece 8
#13 #14
/32 /4
Radius Per Each Piece#6 #11
#13 #14#6 12 radius (i/o) ea. 997
18 or 24 radius (i/o) ea. 1187
S lid d ldi a ailabl i ak#11 12 radius (i/o) ea. 540
S Solid wood moldings available in oak,maple cherry hickory and alder
18 or 24 radius (i/o) ea. 1056maple, cherry, hickory, and alder
S Straight moldings available in 8#13 12 radius (i/o) ea. 540
S Straight moldings available in 8lengths only 18 or 24 radius (i/o) ea. 1056lengths only
S Additional lead times may apply as #14 12 radius (i/o) ea. 540S Additional lead times may apply asthese are purchased moldings 18 or 24 radius (i/o) ea. 1056these are purchased moldings
Bold lines represent finished area; doublethe listed price if specifying finish all.
7082 7082
Standard Finished Ends Attached Standard Finished Ends Attached
Melamine and Plywood HPL veneer
12 Deep Wall
12 High $ 32 $ 57
15 High 32 57
18 High 32 57
24 High 32 57
30 High 32 63
36 High 39 74
42 High 44 85
24 Deep Wall
15 High 32 57
21 High 45 86
27 High 45 86
Base/Vanity
Standard Height 45 86
12 Deep Tall
84 High 96 164
90 High 96 164
96 High 96 164
24 Deep Tall
84 High 96 164
90 High 96 164
96 High 96 164
IS141March 1, 2007
MISCELLANEOUS ACCESSORIES7090 7090
Paneling Paneling
Melamine IDC1/4 1-sided Melamine $ 11.003/4 2-sided Melamine 9.20
HPL on Particle Board1/4 1-sided HPL 12.003/4 1-sided HPL 12.003/4 2-sided HPL 20.00
HPL on Plywood1/4 1-sided HPL 16.001/2 1-sided HPL 16.003/4 1-sided HPL 16.00
Height3/4 2-sided HPL 25.00
Width
HeightFinished
Width 1/8 Plywood 11.001/4 Plywood 16.001/4 Beadboard 20.00
S When ordering, specify thickness first,then width and height last; cut to size
1/2 Plywood 24.00g p ythen width, and height last; cut to size,no charge
5/8 Plywood 25.00no charge
S Specify to finish both sides add 20%3/4 Plywood 26.00
S Specify to finish both sides, add 20%
S Specify for finish edge applied3/4 Fibercore veneer 26.00
S Specify for finish edge applied
Over 48 wide and/or over 96 highBanding Applied, Per Lineal Foot
S Over 48 wide and/or over 96 highwill be shipped in two equal pieces for
Real Wood 4.40will be shipped in two equal pieces forjob site attaching; specify if different PVC 3.20job site attaching; specify if different
S Round everything up to next square HPL (not available on cabinets) 4.80S Round everything up to next squarefoot or lineal foot 3mm PVC 6.80foot or lineal foot
3mm Real Wood 9.30
Round everything up to next square footor lineal foot.
+20% to finish both sides, +50% to finish all(must be able to write on one edge -- specify.)
7095 7095
1/4 Fibercore Island Panel 1/4 Fibercore Island Panel
Finished Per Square Foot IDC
S Specify to finish both sides add 20%1/4 Fibercore $ 16
S Specify to finish both sides, add 20%
S Order a few inches oversized to allowfor cabinet width tolerances.
S 96 x 34 1/2 maximum in oak andhickory, grain runs 34 1/2 direction
S 96 x 48 maximum in alder, cherryand maple, grain runs 48 direction
Width
Height
Round everything up to next square foot.
+20% to finish both sides, +50% to finish all(must be able to write on one edge -- specify.)
7097 7097
Solid Hardwood Solid Hardwood
Finished Per Square Foot IDC
5/8 Solid Hardwood $ 54
3/4 Solid Hardwood 54
S N/A over 36 wide
S Finished face side only unlessspecified
Width
HeightRound everything up to next square foot.
+20% to finish both sides, +50% to finish all(must be able to write on one edge -- specify.)
IS142 March 1, 2007
MISCELLANEOUS ACCESSORIES7100 7100
3/4 Face Frame/Solid Material 3/4 Face Frame/Solid Material
Finished Per Lineal Foot IDC
MSTL3/4 x 1 1/2no dado $ 4.20
SOLID13/4 x 3 1/2no dado 13.00
SOLID23/4 x 7no dado 21.00
DECOR decorative edge 45.00
S Specify custom width if desired, nocharge
S Finished face side only unlessspecified
Round up to next lineal foot.
Over 8 long, add 50%.
+20% to finish both sides, +50% to finish all(must be able to write on one edge -- specify.)
7120 7120
Hardwood Tops Hardwood Tops
S 1 1/2 fibercore tops:Over 96 wide seamed and no
IDCOver 96 wide seamed and nowarranty on grain or color match;1 9/16
HTOP 1 1/2 Fibercore $ 47warranty on grain or color match;coved edge molding used unlessspecified
1 9/16HTOPS 3/4 Solid, 0 - 96 52
specified
S 3/4 solid tops:HTOPS 3/4 Solid, >96 - 120 67
S 3/4 solid tops:Over 84 wide and/or over 30 deep,no warranty; shaped edge profiles
il bl 300 350 400 525 600
3/4 To Notch or Angle:add per each 102y; p g p
available: 300, 350, 400, 525, 600,650, and 750
S Hardwood tops are not intended forsink areas and will not be guaranteedagainst moisture problems when usedin that application
3/4Round everything up to next square foot.
7130 7130
Dishwasher Panels Dishwasher Panels
1/ b k lIDC
S 1/4 backer panel
O 24 id ill h t dDWRL laminate $ 197
S Over 24 wide will have two doorpanels applied to backer DWRW wood 360panels applied to backer
S Recommend finished ends on DWRH HPL 228S Recommend finished ends onadjacent cabinets DWRF Foil 319adjacent cabinets
S Specify exact size, model name, DWRFG high gloss foil 417Specify exact size, model name,model number, and manufacturer’sspecifications on appliance panel
SCOOP 102specifications on appliance panelorder form; if specifications are notincluded, the panel will be removedfrom the order
S Available with scoop, specify locationand width -- wood only
No reveal panels with spacer, add $468.
IS143March 1, 2007
MISCELLANEOUS ACCESSORIES7140 7140
Trash Compactor Panels Trash Compactor Panels
IDC
S 1/ backer panelTCPL laminate $ 197
S 1/4 backer panel
S Over 24 wide will have two door panels appliedTCPW wood 360
S Over 24 wide will have two door panels appliedto backer TCPH HPL 228to backer
S Recommend finished ends on adjacent cabinets TCPF Foil 319S Recommend finished ends on adjacent cabinets
S Specify exact size, model name, model number, TCPFG high gloss foil 417S Specify exact size, model name, model number,and manufacturer’s specifications on appliance
l d f if ifi ti tSCOOP 102p pp
panel order form; if specifications are notincluded, the panel will be removed from theorder
S Available with scoop, specify location and width-- wood only
No reveal panels with spacer, add $468.
7150 7150
Refrigerator Panels Refrigerator Panels
Styles 1 - 4 IDC
REFDPL laminate $ 454
REFDPW wood 825
S 1/ backer panelREFDPH HPL 534
S 1/4 backer panel
S Over 24 wide will have two doorREFDPF Foil 1382
S Over 24 wide will have two doorpanels applied to backer REFDPFG high gloss foil 1739panels applied to backer
S Recommend finished ends on UndercounterRecommend finished ends onadjacent cabinets REFDPUL laminate 197
S Specify exact size, model name,model number and manufacturer’s
REFDPUW wood 360model number, and manufacturer’sspecifications on appliance panelStyles 1 & 2 Style 3 Style 4 REFDPUH HPL 228specifications on appliance panelorder form; if specifications are noti l d d th l ill b d
Sty es & Sty e 3 Sty eREFDPUF Foil 319; p
included, the panel will be removedfrom the order REFDPUFG high gloss foil 417from the order
S Handle reveals are available REFWCU wood 360S Handle reveals are available
S On orders with arched doors on theUndercounter Refrigerator RefrigeratorRefrigerator GrillS On orders with arched doors on the
wall cabinets, only the upper rails ofth f i t ill b h d
UndercounterRefrigerator
RefrigeratorGrill Slab
RefrigeratorGrill Paneled REFGRILLL laminate 197, y pp
the refrigerator will be archedstandard; when a panel is over a
RefrigeratorPanel
Grill Slab Grill Paneled
REFGRILLW wood slab 289standard; when a panel is over apanel, only the top panel will receive REFGRILLWPNL wood paneled 360panel, only the top panel will receivethe arch (specify if different) REFGRILLH HPL 228
S Available with scoop, specify locationand width wood only
REFGRILLF Foil 319and width -- wood only
S REFWCU: Undercounter Wine CoolerREFGRILLFG high gloss foil 417
S REFWCU: Undercounter Wine CoolerAppliance Panel is a square frame SCOOP 102Appliance Panel is a square frameonly, no panel; for full size, fax forquote
No reveal panels with spacer, add $468.
7160 7160
Wainscot Wainscot
S All stiles and rails are 2 1/4 standard except when 34 1/2 Per Square Foot IDCAll stiles and rails are 2 /4 standard except when 34 /2high or with base cabinets, then 6 3/4 bottom rail; specifyfor 6 3/4 or 2 1/4 bottom rail any time no charge
WCP $ 68for 6 3/4 or 2 1/4 bottom rail any time, no charge
S Panels will be 12 - 20 wide
S Not available in mitered, foil, and slab style doors
S Wainscot over 45 wide will be shipped in sections; beforeinstalling, remove the “blank” stile and slide panelstogether; “blank” stiles will be a different wood specie
Round up to next square foot.
Add 20% for custom arrangements.
IS144 March 1, 2007
MISCELLANEOUS ACCESSORIES7170 7170
4-Sided Posts & 3-Sided Columns Per Lineal Foot4-Sided Posts &3-Sided Columns
64-Sided Posts up to 3 x 3 IDC
36
6POST3 wood butt joint $ 753
6 POST3M wood miter joint 75
3POST3H HPL on particle board 80
3POST3HP HPL on plywood 98
4-Sided Posts up to 6 x 6
Specify Specify POST6 wood butt joint 138SpecifySpecify POST6M wood miter joint 138
SpecifyPOST6H HPL on particle board 119
SpecifyPOST6HP HPL on plywood 144
3-Sided Columns up to 3 x 3COLUMN3 wood butt joint 63
3 6 COLUMN3M wood miter joint 63
F id d t d 3 id d l
36
6COLUMN3H HPL on particle board 66
S Four sided posts and 3 sided columns3
6COLUMN3HP HPL on plywood 81
S Specify height33-Sided Columns up to 6 x 6p y g
S See #7030 for fluting COLUMN6 wood butt joint 117See #7030 for fluting
S See #7040 for circle routes COLUMN6M wood miter joint 117S See #7040 for circle routes
S See #7060 for moldings COLUMN6H HPL on particle board 98S See #7060 for moldings
S For larger sizes fax for quoteCOLUMN6HP HPL on plywood 121
S For larger sizes fax for quoteRound up to next lineal foot.
7190 7190
Doors Only Doors Only
Per Square Foot IDC
Solid Wood $ 54
Melamine/HPL 35
S Specify finished dimensions MDF 35S Specify finished dimensionsRound up to next square foot.Add door style charge.Includes hinges.
7210 7210
Drawer Fronts And Dodds Drawer Boxes Drawer Fronts And Dodds Drawer Boxes
Loose Fronts Per Square Foot IDC
DRWR $ 54
Add drawer front style charge.
S Specify finished dimensions for Loose Drawer Boxes (Standard Sizes)S Specify finished dimensions fordrawer fronts
S Specify opening dimensions for
OpeningHeight
OpeningWidth
S Specify opening dimensions fordrawer boxes, width, height, and 0 - 6 1/2 up to 21 80drawer boxes, width, height, anddepth. Standard height and depthused unless custom height and
0 - 6 1/2 over 21 106used unless custom height andcustom depth side-mount specified. 6 1/2 - 11 up to 21 136custom depth side-mount specified.
S Standard heights: 6 1/2 - 11 over 21 174S Standard heights:3 3/815
Cumulative Custom Charges (Per Drawer)3 /83 15/165 11/16
Custom side height 585 11/166 15/16 Custom box depth 586 /168 7/16 DRWRBOT 1/2 drawer bottom 2916
See #7295 for loose drawer guides.
Round up to next square foot.
IS145March 1, 2007
MISCELLANEOUS ACCESSORIES7220 7220
Accent Strips Accent Strips
Wall Accent Strips IDCAS3GE geneva laminate $ 17AS3 wood 92AS3H HPL 89AS3F Foil 92AS3FG high gloss foil 124AS6GE geneva laminate 28AS6 wood 116AS6H HPL 111AS6F Foil 114AS6FG high gloss foil 192
Wall Accent Strips With Three FlutesAS3HF wood 200AS6HF wood 222AS3FF Foil 122AS6FF Foil 175
Wall Accent Strips With Three Flutes,Two Grooves And Two Circle RoutesAS3HFC wood 294AS6HFC wood 316AS3FFC Foil 144AS6FFC Foil 196
Base/Vanity Accent StripsAS3GE geneva laminate 17AS3 wood 92AS3H HPL 89AS3F Foil 92AS3FG high gloss foil 124AS6GE geneva laminate 28AS6 wood 116AS6H HPL 111AS6F Foil 114AS6FG high gloss foil 192
Base/Vanity Accent Strips With Three FlutesAS3HF wood 200AS6HF wood 222AS3FF Foil 122AS6FF Foil 175
S To be used with filler to create a
Base/Vanity Accent Strips With ThreeFlutes, One Groove, And One Circle Route
S To be used with filler to create auniform front flush with doors and AS3HFC wood 247uniform front, flush with doors anddrawers AS6HFC wood 269drawers
S Shipped loose for field installationAS3FFC Foil 144
S Shipped loose for field installation
B d d h d l d tAS6FFC Foil 196
S Banded or shaped one long and twoshort edges standard specify for
Tall Accent Stripsshort edges standard, specify forbanded or shaped four edges for
AST3GE geneva laminate 36banded or shaped four edges foraccents over 2 1/2 wide AST3 wood 142accents over 2 1/2 wide
S Accent strips with flutes will haveAST3H HPL 137
S Accent strips with flutes will havethem stop 1 1/ from top and bottom
AST3F Foil 140them stop 1 1/2 from top and bottomunless specified with print
AST3FG high gloss foil 168unless specified with print
A t t i ith fl t dAST6GE geneva laminate 44
S Accent strips with flutes, grooves, andcircle routes will have 1 1/ between
AST6 wood 235p gcircle routes will have 1 1/2 betweenthem and the top and bottom unless
AST6H HPL 227them and the top and bottom unlessspecified with print
AST6F Foil 230specified with print
F il d t t i ith fl tAST6FG high gloss foil 316
S Foil wrapped accent strips with flutes,grooves and/or circle routes are
Tall Accent Strips With Three Flutesgrooves, and/or circle routes areavailable in the same foil as the foil
AST3HF wood 248available in the same foil as the foilwrapped doors AST6HF wood 338wrapped doors
AST3FF Foil 305AST6FF Foil 388
IS146 March 1, 2007
MISCELLANEOUS ACCESSORIES7230 7230
Fillers Fillers
Wall Fillers Mel Ply
WF3L laminate $ 106 N/A
WF3V veneer 135 $ 147
WF3H HPL 129 141
WF6L laminate 113 N/A
WF6V veneer 147 163
WF6H HPL 141 156
Wall Fillers With One Finished End Panel
WFF3 laminate 153 N/A
WF WFF3V veneer 159 174WFWFF3H HPL 153 168
WFFWFF6 laminate 163 N/A
WFF WFF6V veneer 169 187
WFF6H HPL 163 180
Wall Fillers With Two Finished End Panels
WFF3D laminate 178 N/A
WFF3DV veneer 185 201
WFF3DH HPL 178 194
WFF6D laminate 184 N/A
WFF6DV veneer 192 211
WFF6DH HPL 184 202
Base Fillers
BF3L laminate 66 N/A
BF3V veneer 93 103
BF3H HPL 90 98
BFBF6L laminate 74 N/A
BF BF6V veneer 106 117
BF6H HPL 102 112BFF Base Fillers With One Finished End Panel
BFF3 laminate 232 N/A
S Wall, base, and vanity fillers are BFF3V veneer 242 268Wall, base, and vanity fillers areshipped fully assembled BFF3H HPL 232 257pp y
S Tall fillers are shipped with top piecel f fi ld i t ll ti
BFF6 laminate 243 N/App p ploose for field installation
SBFF6V veneer 253 278
S Specify height for all types BFF6H HPL 243 268S Standard at 12 7/8 , 21 7/8 or 24 7/8deep if no accent strip ordered
Base Fillers With Two Finished End Panels8 8 8deep if no accent strip ordered
S if d l tt h d l ftBFF3D laminate 376 N/A
S Specify end panel attached left orright
BFF3DV veneer 391 429right
S For foil applications use laminate orBFF3DH HPL 376 413
S For foil applications, use laminate orspecify HPL selection BFF6D laminate 383 N/Aspecify HPL selection
S Specify height of tall fillersBFF6DV veneer 398 439
S Specify height of tall fillersBFF6DH HPL 383 422
IS147March 1, 2007
MISCELLANEOUS ACCESSORIES7230 (cont’d) 7230
Fillers Fillers
Tall Fillers Mel Ply
TF3L laminate 109 N/A
TF3V veneer 147 163
TF3H HPL 141 156
TF6L laminate 121 N/A
TF6V veneer 158 173
TF6H HPL 152 167
Tall Fillers With One Finished End Panel
TFF3 laminate 601 N/A
TFF3V veneer 625 688
TFF3H HPL 601 661
TFF6 laminate 611 N/A
TFF6V veneer 636 699
CFTFF6H HPL 611 672
CF Tall Fillers With Two Finished End Panels
TFF3D laminate 1061 N/A
TFF3DV veneer 1103 1213
3 3/4 TFF3DH HPL 1061 11713 /4TFF6D laminate 1070 N/A
3TFF6DV veneer 1114 1225
Top View3
TFTFF6DH HPL 1070 1181Top View
TFVanity FillersVF3L laminate $ 66 N/A
TFF VF3V veneer 93 $ 103VF3H HPL 90 98VF6L laminate 74 N/AVF6V veneer 106 117
67 1/2_ VF6H HPL 102 11267 /2Vanity Fillers With One Finished End Panel
3/VFF3 laminate 232 N/A
3/4 VFF3V veneer 242 268VFF3H HPL 232 257VFF6 laminate 243 N/AVFF6V veneer 253 278
VFVFF6H HPL 243 268
VFVFF Vanity Fillers With Two Finished End PanelsVFF
67 1/ _VFF3D laminate 376 N/A
AT67 1/2_
135_VFF3DV veneer 391 429
AT135_inside
VFF3DH HPL 376 413insideangle VFF6D laminate 383 N/Aangle
VFF6DV veneer 398 439
W ll b d it fillVFF6DH HPL 383 422
S Wall, base, and vanity fillers areshipped fully assembled
Corner Fillersshipped fully assembled
S Tall fillers are shipped with top pieceCF3L laminate 112 N/A
S Tall fillers are shipped with top pieceloose for field installation
CF3V veneer 144 159loose for field installation
S Specify height for all typesCF3H HPL 139 153
S Specify height for all types
St d d t 12 7/ 21 7/ 24 7/45_ Angle Turn
S Standard at 12 7/8 , 21 7/8 or 24 7/8deep if no accent strip ordered
ATL laminate 44 N/Adeep if no accent strip ordered
S if d l tt h d l ftATV veneer 55 60
S Specify end panel attached left orright3
ATH HPL 52 58right
S For foil applications use laminate or
33 45_ Angle Filler
S For foil applications, use laminate orspecify HPL selectionCFA
3CFA3L laminate 71 N/A
specify HPL selectionCFA CFA3V veneer 90 98CFA3H HPL 87 94
IS148 March 1, 2007
MISCELLANEOUS ACCESSORIES7235 7235
3 Fillers --Veneer With Half Spool & Rod Post Attached 3 Fillers -- Veneer With Half Spool &Rod Post Attached
3 Wall Fillers Mel Ply
WF3VSR veneer $ 399 $ 411
WF3VSRR veneer 399 411
3 Wall Fillers with One Finished End Panel
WFF3VSR veneer 424 439
S ifWFF3VSRR veneer 424 439
Specify3 Wall Fillers with Two Finished End Panels
WFF3DVSR veneer 449 465
WFF3DVSRR veneer 449 465
3 Base Fillers3 wide BF3VSR veneer 357 367
BF3VSRR veneer 357 367
1 1/2 WFF3 Base Fillers with One Finished End Panel1 1/2
WFWFF BFF3VSR veneer 506 532
WFSpecify BFF3VSRR veneer 506 532Specify
3 Base Fillers with Two Finished End Panels
BFF3DVSR veneer 655 693
BFF3DVSRR veneer 655 693
3 Tall Fillers
TF3VSR veneer 602 618
TF3VSRR veneer 602 618
TFF3 Tall Fillers with One Finished End Panel
1 1/2TFF3 wideSpecify TFF3VSR veneer 1081 11441 /2
TF
Specify
TFF3VSRR veneer 1081 1144TF3 Vanity Fillers
VF3VSR veneer 357 367
3 wideVF3VSRR veneer 357 367
3 wide3 Vanity Fillers with One Finished End Panel
VFF3VSR veneer 506 532
WF/WFF BF/BFF VF/VFF hi dBFFVFF
1 1/2 VFF3VSRR veneer 506 532S WF/WFF, BF/BFF, VF/VFF: shippedassembled
BFFVFFBF
VF
1 /23 Vanity Fillers with Two Finished End Panels
assembled
S TF/TFF: shipped with top return looseVF
VFF3DVSR veneer 655 693S TF/TFF: shipped with top return loose,front and vertical return assembled VFF3DVSRR veneer 655 693front and vertical return assembled
S Must specify height
S WF/WFF: standard at 12 deep
S BF/BFF: standard at 24 deep; flush toestandard
S TF/TFF: standard at 12 or 24 deep,specify height with 4 1/2 toe space; flushtoe standard
S VF/VFF: standard at 21 deep; flush toestandard
S Specify end panel attached left or right
S 3 Half Spool & Rod Post attached flushwith edges of filler, 8 high top andbottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
IS149March 1, 2007
MISCELLANEOUS ACCESSORIES7240 7240
Radius End Panels Radius End Panels
Single Wall Height HPL veneer
WRE30 30 $ 317 $ 333
WRE36 36 412 432
WRE42 42 503 529
S 2 1/4 radius on unit, not true 3 Double Wall2 /4 radius on unit, not true 3
S Wall Single Radius End:Width 3
DWRE30 30 507 533gWidth: 3Depth: 12 7/8
DWRE36 36 670 703Depth: 12 7/8Height: specifyWRE DWRE DWRE42 42 832 874g p y
S Wall Double Radius End:Width: 3
SIngle BaseWidth: 3Depth: 13 3/4 BRE3 34 1/2 585 614Depth: 13 /4Height: specify
B Si l R di E dDouble Base
S Base Single Radius End:Width: 3 DBRE3 34 1/2 845 888Width: 3Depth: 24 7/8Height: 34 1/
Single TallHeight: 34 1/2
S Base Double Radius End:TRE83 83 1084 1138
S Base Double Radius End:Width: 3
3TRE84 84 1084 1138Width: 3
Depth: 25 3/4Height: 34 1/2
BRE DBRE TRE89 89 1140 1196Height: 34 1/2
S Tall Single Radius End: TRE90 90 1140 1196S Tall Single Radius End:
Width: 37 7
TRE95 95 1140 1196Width: 3Depth: 12 7/8 or 24 7/8Height: specify
TRE96 96 1140 1196Height: specify
S Tall Double Radius End: Double TallS Tall Double Radius End:Width: 3Depth: 13 3/ or 25 3/
DTRE83 83 1345 1412Depth: 13 3/4 or 25 3/4Height: specify DTRE84 84 1345 1412Height: specify
S Specify curved left or curved right for Talls DTRE89 89 1401 1470Specify curved left or curved right for Talls
S Cutdown in height and depth, no charge DTRE90 90 1401 1470Cutdown in height and depth, no charge
S HPL or veneer applied over curved buildup DTRE95 95 1401 1470pp p
S Shipped loose for field installationTRE DTRE
DTRE96 96 1401 1470pp
S For foil applications, specify HPL selectionTRE DTRE
7270 7270
Loose Shelves Loose Shelves
Per Ln. Ft. Mel Ply
Additional 10 13/16 Deep StandardWall Cabinet Shelves (With Banding)
XSHW laminate $ 11 N/A
XSHWF finished 28 $ 28
Additional 22 13/16 Deep StandardBase Cabinet Shelves (With Banding)
S Specify shaped edges and profile on XSHB laminate 19 N/AS Specify shaped edges and profile onsolid wood shelving XSHBF finished 47 47g
Solid Wood Shelving
SHS per sq. ft. 54 54
Add 1 1/2 Solid Stock ToFace Of Shelf With EdgeProfile On Top Edge
Per Ln. Ft.Each Shelf
XSHSS per ln. ft. N/A 18
Round up to next lineal foot or square foot.
IS150 March 1, 2007
MISCELLANEOUS ACCESSORIES7275 7275
Countertop/Shelf Supports Countertop/Shelf Supports
1 1/2 thick 1 1/2 thick IDC
7 5/
1 /2 thick 2
WST8 wood $ 587 1/29 1/2 4 7/16
7 5/169 3/8 WST10 wood 68
9 1/24 7/161/
4 7/165 1/16
9 /8WSC8 wood 58/16
5 1/1616
WSC10 wood 68
C t TraditionalWSC10H HPL 134
ContemporaryWSC-8
TraditionalWST-8 WSB3 1/2 wood 58WSC-8
WSC-10WST-8WST-103/4 thick with WSB12 wood 68
S Keyhole brackets on both flat sides ofWSC and WST
S Oak, maple, and cherry only on woodbrackets
S For custom sizes, submit print forquote
5 1/16
9 1/2
1 1/2
3 1/212
3 1/212
BracketWSB-3 1/2WSB-12
Contemporary HPLWSC-10H
3/4 thick with1 1/2 hanging strip
3/4 thick with2 hanging strip
7276 7276
Bar Consoles Bar Consoles
7 7/8 7 7/8Straight IDC/8 7 7/8BARSS $ 308
BARSG 368
7 7/ 20_ Angled
S Use with solid top:7 7/8
20_
7 7/8BARAS 330
S Use with solid top:BARSS (straight)
7 7/8BARAG 415BARSS (straight)
BARAS (angled)
S Use with glass top (contactglass supplier for adhesive):BARSG (straight)BARAG (angled)
S Maximum load: 30 lbs. perconsole
S Maximum span betweenconsoles: 23 1/2
S Maximum countertopoverhang: 7 7/8
S Hafele item
IS151March 1, 2007
MISCELLANEOUS ACCESSORIES7280 7280
Miscellaneous Parts Miscellaneous Parts
IDC Shelf Clips(Specify Brass or Chrome) IDC
SPOON each $ 0.20
Metal Shelf Standards Loose
STDLsurface looseper ln. ft. 2.20
CLIPmetal clip forstandards each 1.30
Miscellaneous Wood Parts
MAPLE
1 1/2 chopping blockper sq. ft.
up to 25 deep 85
MAPLE
1 1/2 chopping blockper sq. ft.>25 deep
fax forquote
H t t i i 1 9/ 30 d iToeboard (4 1/2 high)
S Heat strip is 1 9/16 x 30 and isintended to be applied to cabinetsadjacent to ovens
Toeboardper ln. ft.
3/4 laminate 4.20adjacent to ovens
Toeboardper ln. ft.3/4 HPL 7.80
Toeboardper ln. ft.3/4 veneer 10
Miscellaneous
Leg Socket 4.30
Legs Only 8
Toe Kick Clips 2.20
J-Track 8 section 48
HangingBrackets per pair 11
DP 100 door pads 11
LOCK door 61
LOCKDW drawer 61
Heat Strip per pair 45
7290 7290
Hinging Hinging
Hinges (Per Pair) IDC
Free Swinging Hinges $ 22DWC - DBC Hinges 32Base Radius Hinges 32Blumotion Soft Close 41
110_ Half Overlay Clip Hinges 32
120_ Clip Hinges 32
170_ SCB Hinges 44Blum Bi-Fold Hinges 44
IS152 March 1, 2007
MISCELLANEOUS ACCESSORIES7295 7295
Drawer Guides Loose Drawer Guides Loose
Tandembox DrawerAssembly Kit IDC
Up to 6 high drawer front $ 144
Up to 12 high drawer front 182
S Tandembox drawer/rollout assembly
Tandembox Rollout AssemblyKit and Carcase Members
S Tandembox drawer/rollout assemblykits do not include back/bottom; Standard 184kits do not include back/bottom;hardware only
K b d lid d dTall 231
S Keyboard slides do not need acabinet; they mount to bottom ofcountertop or adjacent cabinet
Stainless Steel TandemboxDrawer Assembly Kit
countertop or adjacent cabinet
S Keyboard slides have a 75 lb weight Up to 6 high drawer front 189S Keyboard slides have a 75 lb. weightcapacity; shelf width must bei i f 1 l h i
Up to 12 high drawer front 285capac ty; s e dt ust beminimum of 1 1/4 less than openingwidth; variable height mounting clipsallow adjustment from 1 1/4 to 3 5/16
Stainless Steel Tandembox RolloutAssembly Kit and Carcase Members
allow adjustment from 1 1/4 to 3 5/16usable space Standard 293usable space
Tall 363
Loose Pair
KSLIDEkeyboard slides loose pair 92
Undermount Soft Close 74
7300 7300
Material Pricing Material Pricing
Premiums IDC
White Melamine Standard
Maple Melamine Standard
Melamine Geneva* --5%
Wood Orders: Alder Standard
Character Alder Standard
Red Oak Standard
Character Oak Standard
*Quarter Sawn Oak +10%
*Hard Maple +8%
*Character Maple +8%
*Hickory –5%
*Character Hickory –5%
*Cherry +15%
*Character Cherry +15%
HPL Orders: Solid Matte Colors Standard
Gloss Colors,Special Patterns,Woodgrains, andNevamar HPL
call forupcharge
* Premium is applied to entire order.
IS153March 1, 2007
MISCELLANEOUS ACCESSORIES7310 7310
Finish Pricing Finish Pricing
Premiums IDC
Briarwood +15%
Coffee Bean +5%
Concord +5%
Natural --5% except when glazed
Parchment +15%
Russet +15%
Sable +15%
S See Company Policies and Finishing Unfinished --10%See Company Policies and FinishingFacts section in the Technical Guidefor color descriptions details and
Painted +5%for color descriptions, details andfinishes that are recommended to Glazes on stains +15%finishes that are recommended tohave a signed product awarenessd l i
Washes on stains +12%a e a s g ed p oduct a a e essdeclaration
Addi i l l d i lDesigner’s Line +10%
S Additional lead times may apply, seeFinishing Facts section in Technical
Designer’s Line Glazed +20%Finishing Facts section in TechnicalGuide Designer’s Line Washes +17%Guide
S Additional upcharges to customcolors premium may apply; call
Designer’s Line Suede BrushedGlaze +25%colors premium may apply; call
customer service to verify upcharge Standard Topcoat 40_-45_ sheen standardy p g
Matte Topcoat 15_-25_ sheen standard
Flat Topcoat 5_ sheen standard
Custom Colors+5%
minimum
MATCH - Custom match $ 985.92
MATCH2 - Repeat match 422.54
Apply premiums to entire order in addition toany specie premiums (finish & wood premiumsare cumulative).
7311 7311
Vintage Artistry Vintage Artistry
Premiums IDC
S C P li i d Fi i hiWorn-Look/Rub Thru +20%
S See Company Policies and FinishingFacts section in the Technical Guidefor color descriptions, details, andfi i h th t d d t
The following options are available at ano charge: wormholes, splits, flyspecking,and distressingp , ,
finishes that are recommended tohave a signed product awareness
Edge & Corner Wear +10%have a signed product awarenessdeclaration
S Additional lead times may apply, see
The following options are available at ano charge: wormholes, splits, flyspecking,and distressingS Additional lead times may apply, see
Finishing Facts section in Technical Carriage House +25%Finishing Facts section in TechnicalGuide
S Distressing options are intended tocreate an aged-worn look (antique
The following options are available at ano charge: wormholes, splits, flyspecking,and distressing
create an aged-worn look (antiquefurnishings) Ala Carte Premiumsfurnishings)
S We recommend approving a door Distressing +3%S We recommend approving a doorsample or DRA prior to ordering any Splits +2%sample or DRA prior to ordering anyof the Vintage Artistry options Wormholes +2%of the Vintage Artistry options
S Visually see the result the customer isFlyspecking +3%
S Visually see the result the customer isasking for Apply premiums to entire order in addition to
any specie premiums (finish & wood premiumsare cumulative).
IS154 March 1, 2007
MISCELLANEOUS ACCESSORIES7320 7320
Finish Materials Finish Materials
Stain IDC
STAINQ quart $ 72
STAING gallon 132
Wood Filler
M t fi i h t i i t i dWOODF quart 45
S Most finishes are not wiping stains andare not available for field application;
Touch Up Itemsare not available for field application;see finishing facts in the technical guide FS fil-stik 11see finishing facts in the technical guidefor application method MARKER marker 22o app ca o e od
S Due to federal regulations, quarts can Touch Up Kit (fil-stik & marker)Due to federal regulations, quarts canbe shipped standard UPS; gallons offinish material can only be delivered on
TOUCH standard 34finish material can only be delivered ona Holiday truck TOUCHA glazed finish 66a Holiday truck
S For questions on all Holiday finishesClear Satin Acrylic Top Coat
S For questions on all Holiday finishes,please call Holiday
SPRAY
aerosol can,specify standardsheen or matte 22
Polish Kit
POLISH
liquid polish,aerosol polish,polishing rag 50
7330 7330
Tambour Material And Installation Tambour Material And Installation
Material IDC
Flat Tambour Tambour per sq. ft. $ 50Flat TambourSpecial color HPL tambour, add: 124
Installation
Labor per opening 196
S Specify white melamine or naturalmaple melamine flat tambour, ortraditional wood tambour; if notspecified, cabinets with wood doorsreceive traditional wood tambour
S Flat tambour is not recommended inwidths greater than 30
S Minimum 2 wide x 8 long flattambour
TraditionalTambour
Round up to next square foot.
Add correct number of labor charges and totaltambour material.
7340 7340
Pull Out T.V. Swivel Pull Out T.V. Swivel
IDC
S Recommend using 170_ hinges on POTV $ 340S Recommend using 170_ hinges oncabinet, upcharge appropriately
S Minimum 18 deep and 15 widecabinet
S Maximum weight on swivel: 125 lbs.
S Swivel and wood top deducts 2 fromusable inside vertical space
S Hafele item
6 extension
15
Includes swivel hardware, hardwood top, andinstallation.
IS155March 1, 2007
MISCELLANEOUS ACCESSORIES7350 7350
Entertainment Door Hardware Entertainment Door Hardware
Entertainment Door Openings IDCS Usable inside cabinet space equalsoverall cabinet width minus 3 per
ETDOOR up to 36 h $ 380overall cabinet width minus 3 perdoor; 3 3/4 per door with each vertical ETDOOR2 over 36 h 567door; 3 3/4 per door with each verticaldivider VCR Boxd de
S Molding applied entertainment doorsd h ldi li d
VCRBOX 379g ppdo not have moldings applied Vertical Dividers Mel Ply
S VCR box made from solid hardwood Wall $ 96 119S Pillow door not available Base 96 119S Entertainment doors are inset doors,recommend making cabinet 7/
Tall 152 190recommend making cabinet 7/8deeper than adjoining cabinets tocreate flush front
S Recommend finished interior, chargesapply
S ETDOOR: roller bearing hardware,16 minimum cabinet depth
Add to price of cabinet.
Add door style charges.
7390 7390
Solid Wood Spindles Solid Wood Spindles
24 IDC
3 SPIN24 $ 2893
SPIN36 411
4 1/2 4 1/2 SPIN48 537
S All wood species available
S Other sizes and styles available,fax print for quote
S Variations in grain and color mayoccur and are acceptable
S Adds two weeks to standardlead times
2
36
3
66
48
3
8 8
Add 50% to split spindles.
IS156 March 1, 2007
MISCELLANEOUS ACCESSORIES7395 7395
Solid Wood Kitchen Island Legs Solid Wood Kitchen Island Legs
3 1/2 4 3 1/2 4 3 1/2 3 1/2 Per Each IDC
#1450 The Islander $ 399
5 1/2 5 3/8#1455 Grand Island 399
5 1/2
12 1/
5 3/88 3/4 7 1/2 7 #1456 Reeded Island 399
12 1/88 /4
#1457 Cumberland Island 399
#1458 St. Simons Island 399
#1459 Tybee Island 399
#1470 3 Concord 399
23 3/422 16 3/4#1483 Contemporary Rope 39923 /4
2717
16 3/4
27 1/2Solid Wood Kitchen Island Half Legs(Per Each Half)
#1450.5 Islander Half 309
4 1/2#1455.5 Grand Half 309
4 1/2#1456.5 Reeded Half 309
75 3/8 5 3/8 4 1/2
#1457.5 Cumberland Half 3095 /8 5 3/8 4 1/2#1458.5 St. Simons Half 309
1450- The Islander 1455- Grand 1456- Reeded 1457- Cumberland 1458- St. Simons 1459- Tybee #1459.5 Tybee Half 30934 1/2 x 3 1/2 x 5 1/2 34 1/2 x 4 x 12 1/8 34 1/2 x 3 1/2 x 5 3/8 341/2 x 4 x 8 3/4 34 1/2 x 3 1/2 x 7 1/2
y34 1/2 x 3 1/2 x 7
#1470.5 3 Concord Half 309
3 3 1/2#1483.5 Contemporary Rope Half 309
S 34 1/2 high
S Available in all wood specie
S Other sizes and styles available, seewww.osbornewood.com; fax print forquote
S Variations in grain and color mayoccur and are acceptable
S Adds two weeks to standard lead
S Osborne Wood Products, Inc.
S Half legs available
1470- 3 Concord34 1/2 x 3 x 9 1/2
1483- Contemporary Rope34 1/2 x 3 1/2 x 5 3/8
3
5 3/8
3 1/2
5 3/8
23 3/4
9 1/2
4 1/8
16 5/8
4 1/4
IS157March 1, 2007
MISCELLANEOUS ACCESSORIES7395.5 7395.5
Solid Wood Extended Kitchen Island Legs Solid Wood Extended Kitchen Island Legs
3 1/23 1/2 Per Each IDC
#1550 Extended Islander $ 471
5 1/21#1556 Extended Reeded 471
5 1/28 1/4 Solid Wood Extended Kitchen IslandHalf Legs (Per Each Half)
#1550.5 ExtendedIslander Half 353
#1556.5 ExtendedReeded Half 353
S 40 1/2 high
S Available in all wood specie
S Other sizes and styles available,see www.osbornewood.com; faxprint for quote
S Variations in grain and color mayoccur and are acceptable
S Adds two weeks to standard lead
S Osborne Wood Products, Inc.
S Half legs available
1550- Extended Islander40 1/2 x 3 1/2 x 8 1/4
1556- Extended Reeded40 1/2 x 3 1/2 x 5 1/2
5 1/2
29 1/2
6 7/8
25 3/8
7396 7396
Half Spool & Rod Posts Half Spool & Rod Posts
B-SPL2-8 8 3 Wide IDCB-SPL2-8 8B-SPL1-8 8B SPL0 8 7 1/
B-SPL2-8 set of two $ 111
S Available in all wood specie
B-SPL0-8 7 1/2B-SPL2-12 set of two 124
S Available in all wood specie
S Variations in grain and color may occurHR2-Plain lineal foot 36
S Variations in grain and color may occurand are acceptableHR2 2 w 1 d
HRR2-Reed lineal foot 36and are acceptable
S Other sizes and styles available, seeHR2 2 w, 1 dHR1 1 1/2 w, 3/4 dHR0 1 1/4 w 5/8 d
2 1/2 WideOther sizes and styles available, seewww.afe-inc.com; fax print for quoteHR0 1 1/4 w, 5/8 d
B-SPL1-8 set of two 111S Art for Everyday, Inc. B-SPL1-12 set of two 124
To Order: HR1-Plain lineal foot 36To Order:
S Select width:B-SPL2-12 12 HRR1-Reed lineal foot 36S Select width:3 , 2 1/2 or 2 ; charge is for a set of two
B-SPL2-12 12B-SPL1-12 12B-SPL0-12 11 1/2
2 WideS Select an end cap height:8 or 12 ; end caps for the 2 post are
B-SPL0-12 11 1/2B-SPL0-8 set of two 111
8 or 12 ; end caps for the 2 post are7 1/2 or 11 1/2 ; charge is for a set of B-SPL0-12 set of two 1247 /2 or 11 /2 ; charge is for a set oftwo HR0-Plain lineal foot 36
S Specify the center rod length:h i li l f t
HRR0-Reed lineal foot 36p y gcharge is per lineal foot
S HR = Plain Rod
S HRR = Reed Rod
IS158 March 1, 2007
MISCELLANEOUS ACCESSORIES7400 7400
Bun Feet Bun Feet
5 dia.3 1/2 dia. 5 dia. Loose Price IDC2
549 Plain Bun Small $ 79
32 1/550 Plain Large 3 95
34
2 1/43 550 Plain Bun Large 4 1064
549 BUN
3551 Beaded Bun 97
550BUN
549 BUN551 BUN 552 Reeded Bun 128
BUN5 dia.5 553 Apple Bun 1045
554 Flat Bun 87
3 555 Square Bun 973
2 556 Leg 6 102
5
2
556 Leg 5 107
552 BUN553 BUN
5554 BUN 556 Leg 4 109553 BUN
5 3 3 2 7/557 Leg 6 * 98
5 3 3 2 7/8 557 Leg 5 * 102
557 Leg 4 * 104
S Available in oak, maple, and cherry
S Other bun styles are available, seewww.adamswoodproducts.com; faxprint for quote
S Variations in grain and color mayoccur and are acceptable
S Adams Wood Products
S #557 available alder
555 BUN
3
3 1/26 5 4
1 1/211/2 11/2556 LEGS (All 3 sizes4 dia.)
6 5 4
3 1/4 3 1/4 3 1/4
2 2 2 1/8
(All 3 sizes 3 1/2 dia.)557 LEGS
* #557 available alder.
7403 7403
Corner Bun Feet Corner Bun Feet
Loose Price IDC
703010 Hampton Corner $ 165
HAMPTON CORNER HAMPTON LEFT HAMPTON RIGHT 703110 Hampton Left 111HAMPTON CORNER HAMPTON LEFT HAMPTON RIGHT703210 Hampton Right 111
S Available in alder, maple, and cherry
Oth b f t t l il blApplied to cabinet, each 44
S Other corner bun feet styles are available, seewww.brownwoodprod.com; fax print for quote
S Variations in grain and color may occur and areacceptable
S Brown Wood Products
IS159March 1, 2007
MISCELLANEOUS ACCESSORIES7405 7405
Support Legs Support Legs
List Each IDC
450 SILVER H-LEGS $ 162
450 BLACK H-LEGS 162
610 SILVER H-LEGS 181
610 BLACK H-LEGS 181
S Side bases for desks, training tables,conference tables, etc.
S Available in two sizes, must specify
S With adjustable feet, offering 3 ofadjustment
S Components are welded together formaximum strength
S Are sold individually boxed
S Hafele item
7406 7406
Shelf Suspension Systems Shelf Suspension Systems
Beta Shelf Suspension System(List Price Each) IDC
BRIGHT CHROME $ 295
BRIGHT GOLD 445
Intermediate Supports
CHROME POLISHED 60
BRASS POLISHED 60
S For shelves suspended from theceiling
S For attachment through wood orglass, a 14 mm hole is required
Beta Shelf Suspension System
S Complete with 1 threaded rod, 1 tube(20 x 896 mm), 1 upper sleeve, 1centering ring, 1 sleeve nut, 1 rubberclamping ring
S Finish: steel/brass, surface-threaded
Intermediate Supports
S For additional ceiling shelves to theBeta Suspension System
S Finish: brass electroplated orepoxy-coated
IS160 March 1, 2007
MISCELLANEOUS ACCESSORIES7407 7407
Furniture Feet Furniture Feet
FURNITUREFEET
See Hafele Catalogor fax factory for quote
S Endless furniture/feet options areavailable from Hafele in both woodand metal
S Complete availability, size specs andpricing; see Hafele catalog pages1121--1138, or fax factory for quote
S Hafele item
7410 7410
Inset Molding End Panels Inset Molding End Panels
Standard Panel IDC
Wall 12 7/8 deep $ 162
Base 24 7/8 deep 223
Tall 12 7/8 deep 368
Tall 24 7/8 deep 592
Beadboard Panel
Wall 12 7/8 deep 220
Base 24 7/8 deep 347
Tall 12 7/8 deep 502
Tall 24 7/8 deep 927
S Specify heights when orderingInset Molding
For Deeper Panels:Wall, add:Base, add:Tall, add:
8989121Inset Molding
o m c h Loose Molding (Per Lin. Ft.)o c
Inset 0 - 8 11
IS161March 1, 2007
MISCELLANEOUS ACCESSORIES7430 7430
Commercial Upgrades Commercial Upgrades
3mm PVC Banding IDC
Upcharge per door style $ 32
Upcharge per drawer front style 22Note: All dimensions expressed
in millimeters 5-Knuckle Stainless Steel Institutional Hingein millimeters.Upcharge per door 34
2 5 2 52 51mm Banding
2.5 2.52.5Upcharge per wall cabinet 18
588 8 8 Upcharge per base cabinet 18588 8 8
Upcharge per tall cabinet 29
S 3mm PVC banding of doors: availableon Geneva doors only, not availableon cabinets; limited colors, contactfactory
S 3mm real wood banding available onFrisco door, not available on cabinets
S 5-knuckle stainless steel institutionalhinge; barrel exposed with specialhorizontal reveals
S 1mm PVC banding of cabinets: frontedges only, top and bottom edges ofcabinet remain 0.5 mm; limited colors,contact factory
Double Door(hinged outside)
Single Door
55
58
5
8 88
2.5 2.5 2.5
For accent strips on 3mm banding orders, usesame upcharge as a drawer front.
7500 7500
Raymond Enkeboll Collection Raymond Enkeboll Collection
S For complete catalog offerings andIDC
S For complete catalog offerings andcolor photos, visit Enkeboll’s website CATALOG (RECAT) $ 73color photos, visit Enkeboll s websiteat www.enkeboll.com; fax HolidayKitchens for quote at 1-800-497-4314
S Alder available on selected items, seecatalog or call customer service
S For selected priced items, seefollowing catalog sections
IS162 March 1, 2007
MISCELLANEOUS ACCESSORIES7510 7510
Holiday Kitchens’ Raymond Enkeboll Price List Holiday Kitchens’Raymond Enkeboll Price List
Corbels IDCCorbels CBL-TX0 maple-oak fax/call for quote
CBL-TX0 cherry fax/call for quote
CBL-TO0 maple-oak fax/call for quote
CBL-TO0 cherry fax/call for quote
CBL TX0CBL-TO1 maple-oak fax/call for quote
CBL-TX0CBL-TO1 cherry fax/call for quote
CBL-TO1 CBL-TO2 maple-oak fax/call for quote
CBL-TO2 cherry fax/call for quote
S For pricing on additional corbels, faxfactory for quote
S Shipped loose only
CBL-TO2CBL-TO0
CBL-TX0:Corbel Traditional Extra-mini (2 5/8 w x 2 3/4 d x 4 1/2 h)CBL-TO0:Corbel Traditional Mini (3 1/2 w x 3 7/8 d x 6 5/8 h)CBL-TO1:Corbel Traditional Small (4 3/4 w x 5 3/4 d x 9 1/2 h)CBL-TO2:Corbel Traditional Medium (5 3/4 w x 7 1/2 d x 14 h)
7520 7520
Holiday Kitchens’ Raymond Enkeboll Price List Holiday Kitchens’Raymond Enkeboll Price List
Moldings IDC
Moldings MLD-EO1 maple-oak fax/call for quote
MLD-EO1
gMLD-EO1 cherry fax/call for quote
MLD-OP3 maple-oak fax/call for quote
MLD-OP3 cherry fax/call for quote
MLD-OP3 MLD-GP3 maple-oak fax/call for quote
MLD-GP3 cherry fax/call for quote
MLD-GC6 maple-oak fax/call for quote
MLD-GP3 MLD-GC6 cherry fax/call for quote
MLD-GB6 maple-oak fax/call for quote
MLD-GB6 cherry fax/call for quote
S For pricing on additional moldings,fax factory for quote
S Shipped loose only
MLD-EO1: Molding Egg & Dart (11/16 w x 5/8 t)MLD-OP3: Molding Oak Leaf Pierced (3 w x 1 t)MLD-GP3: Molding Grape Pierced (3 w x 1 t)MLD-GC6: Molding Grape Crown (3 5/8 h x 4 1/2 projection)MLD-GB6: Molding Grape Butt (5 3/4 w x 1 1/4 t)
MLD-GB6 Molding GrapeButt
MLD-GC6 Molding GrapeCrown
Sold in 8 lengths only.
IS163March 1, 2007
MISCELLANEOUS ACCESSORIES7530 7530
Holiday Kitchens’ Raymond Enkeboll Price List Holiday Kitchens’Raymond Enkeboll Price List
Onlays IDC
ONL-AM2 maple-oak fax/call for quote
ONL-AM2 cherry fax/call for quote
Onlays ONL-AM3 maple-oak fax/call for quote
ONL-AT0Onlays
ONL-AM3 cherry fax/call for quote
ONL-AH1 maple-oak fax/call for quoteONL-AT1 ONL-AH1 cherry fax/call for quote
ONL-AC1 ONL-AH2 maple-oak fax/call for quoteONL-AC1
ONL-GT1 ONL-AH2 cherry fax/call for quoteONL-GT1ONL-AH3 maple-oak fax/call for quote
ONL-AM2 ONL-AH3 cherry fax/call for quote
ONL-AH1
ONL-AM2ONL-AH4 maple-oak fax/call for quote
ONL-AC2
ONL-AH1ONL-AH4 cherry fax/call for quote
ONL-AC2ONL-AH5 maple-oak fax/call for quote
ONL-AH2 ONL-AH5 cherry fax/call for quoteONL-AH2
ONL-GM2 maple-oak fax/call for quote
ONL-GM2 cherry fax/call for quote
ONL AH3ONL-GT1 maple-oak fax/call for quote
ONL-AH3ONL-GT1 cherry fax/call for quote
ONL-AC1 maple-oak fax/call for quote
ONL-AC1 cherry fax/call for quoteONL-AM3ONL-GM2 ONL-AC2 maple-oak fax/call for quote
ONL-AH4 ONL-AC2 cherry fax/call for quote
ONL-AT0 maple-oak fax/call for quote
ONL-AT0 cherry fax/call for quote
ONL-AT1 maple-oak fax/call for quote
ONL-AT1 cherry fax/call for quote
S For pricing on additional onlays, fax factoryfor quote
S Price reflects loose
ONL-AM2 Onlay Acanthus Medallion Medium (4 1/2 w x 11 h)ONL-AM3 Onlay Acanthus Medallion Large (6 1/2 w x 15 h)ONL-AH1 Onlay Acanthus Horizontal Small (8 w x 2 1/2 h)ONL-AH2 Onlay Acanthus Horizontal Medium (12 w x 3 3/8 h)ONL-AH3 Onlay Acanthus Horizontal Large (20 w x 4 1/2 h)ONL-AH4 Onlay Acanthus Horizontal Extra Large (24 w x 5 1/2 h)ONL-AH5 Onlay Acanthus Horizontal Ultra Large (36 w x 6 1/2 h)ONL-GM2 Onlay Grape Medallion Medium (4 1/4 w x 11 h)ONL-GT1 Onlay Grape Trim Small (pair) (7 w x 3 3/8 h)ONL-AC1 Onlay Acanthus Corner Small (4 w x 4 h)ONL-AC2 Onlay Acanthus Corner Medium (8 w x 8 h)ONL-AT0 Onlay Acanthus Trim Mini (pair) (5 w x 2 1/2 h)ONL-AT1 Onlay Acanthus Trim Small (pair) (7 w x 3 3/8 h)
ONL-AH5 Price reflects loose.
IS164 March 1, 2007
MISCELLANEOUS ACCESSORIES7550 7550
Holiday Kitchens’ Preferred Vendor List Holiday Kitchens’ Preferred Vendor List
Holiday Kitchens has established business relationships with thefollowing vendors. Whenever possible, it is best to use productsfrom this vendor list. Requests for products from other vendorsmay include additional time and charges for R & D andengineering. Please supply complete vendor informationincluding part numbers.
Adams Wood Products www.adamswoodproducts.com. . . . . . . . . .Art for Everyday,Inc. www.afe-inc.com. . . . . . . . . . . .Artistic www.Artwood.com. . . . . . . . . . . . . . . . . . . . . . . .Brown Wood Products www.brownwoodprod.com. . . . . . . . . .Baer Supply www.baerco.com. . . . . . . . . . . . . . . . . . .Blum www.blum.us.com. . . . . . . . . . . . . . . . . . . . . . . . .Brown Wood Products www.brownwoodprod.com. . . . . . . . . .Classic Brass www.classic-brass.com. . . . . . . . . . . . . . . . . .CRVP www.crvp.com. . . . . . . . . . . . . . . . . . . . . . . .Element Designs www.element--designs.com. . . . . . . . . . . . . . .Feeny-KV www.KV.com. . . . . . . . . . . . . . . . . . . . .Hafele America www.Hafeleonline.com. . . . . . . . . . . . . . . .Hofco, Inc. www.hofcoinc.com. . . . . . . . . . . . . . . . . . . .Inox Group www.inoxgroup.com. . . . . . . . . . . . . . . . . . . .Northern Contours www.northerncontour.com. . . . . . . . . . . . . .Ornamental Products www.ornaprod.com. . . . . . . . . . .OsborneWood Products www.osbornewood.com. . . . . . . . .Premoule www.premoule.com. . . . . . . . . . . . . . . . . . . . .Raymond Enkeboll www.Enkeboll.com. . . . . . . . . . . . .Rev-A-Shelf www.rev-a-shelf.com. . . . . . . . . . . . . . . . . . .Vent-a-Hood www.Ventahood.com. . . . . . . . . . . . . . . . . . .White River Mouldings www.Whiterivermouldings.com. . . . . . . . . .
HPL -- Laminate Supplers
Formica www.formica.com. . . . . . . . . . . . . . . . . . . . . . .Nevamar www.nevamar.com. . . . . . . . . . . . . . . . . . . . . .Pionite www.panolam.com. . . . . . . . . . . . . . . . . . . . . . . .Wilsonart www.wilsonart.com. . . . . . . . . . . . . . . . . . . . . .
S See catalogs on-line in dealer’s web onwww.holidaykitchens.com for link
7600 7600
Sales Aids Sales Aids
S For Sales Aids items see the Sales AidsS For Sales Aids items see the Sales Aidssection in the Technical Guide SALES AIDS See Technical Guide
IS165March 1, 2007
QualityDesigned forQualityLiving
HOLIDAY KITCHENS120 West Allen StreetRice Lake, WI 54868
Voice: (715) 736-9200 FAX: 1-800-497-4314
www.holidaykitchens.com
email to: [email protected]
INTERNATIONALDESIGN COLLECTION
Door Style ChargesEffective March 1, 2007
1. Door and drawer front style charges are separated into six different price categories; thecross reference chart provided lists all door styles in alphabetical order.
2. Numbers reflect the charge per door of the appropriate style; doors over 42 tall have twodoor style charges.
3. Blank Areas: door is not available with those specifications.
4. Arch/Square: specify arch or square doors.
5. Wooddoors canbeorderedwith different edge profiles at no charge, check appropriate doorstyle page for edges available.
6. Certain HPL is subject to a minimum upcharge on HPL items only. Call for a quote on glossor pattern HPL.
7. For door modifications, see Wall Cabinets #1420, Base Cabinets #2530,or Tall Cabinets #4585.
8. HPL doors requiring banding can be banded with HPL, add 50% to door and drawer frontstyle charge.
9. For commercial upgrades to doors/drawer fronts, see catalog #7430.
March 1, 2007 IS167
DOOR STYLE CHARGESPRICE GROUP I
DOOR STYLE CHARGES DRAWER FRONT CHARGES
RoutedFrench Mullion
3 Stile & Rail OptionSlab
Door Style StandardRoutedfor Glass Wood Foil/MDF
3 Stile & Rail Option(Square Doors Only) a Wood Foil/MDF
LIST PRICE $19 $31 $137 N/A No additional upcharge N/C $31
ContemporaryGeneva (Mel/HPL)JamestownMission a
Phoenix a
PRICE GROUP IIDOOR STYLE CHARGES DRAWER FRONT CHARGES
RoutedFrench Mullion
3 Stile & Rail OptionSlab
Door Style StandardRoutedfor Glass Wood Foil
3 Stile & Rail Option(Square Doors Only) Wood Foil Paneled
LIST PRICE $61 $31 $137 $265 No additional upcharge N/C $31 $54
Birmingham Arch/Square a
Cedarcreek a
Harrisburg Arch/Square a
Italia See Shaker See ShakerKingston Arch/Square a
Lancaster Arch/Square a
Lexington Arch/Square a
Lexus Arch/Square See ShakerPetersburg Arch/Square a
Portland Supreme a
Prism See Shaker See ShakerRegency a
Seattle a b
Summit Arch/Square a
Wiltshire Arch/Square a
Winchester Arch/Square a
PRICE GROUP IIIDOOR STYLE CHARGES DRAWER FRONT CHARGES
RoutedFrench Mullion
3 Stile & Rail OptionSlab
Paneled/Door Style Standard
Routedfor Glass Wood Foil
3 Stile & Rail Option(Square Doors Only) Wood Foil
Paneled/MDF Slab
LIST PRICE $86 $31 $137 $265 No additional upcharge N/C $31 $54
Alero Arch/Square See ShakerEdgewaterEngelbrookHarrisburg IILancaster Double ArchLancaster Square DuetLexington Double ArchLexington Square DuetMunich See FriscoPortland Supreme DuetRiversideSeattle Duet b
Seattle Groove a
SpringdaleTahoeUltima Arch/Square See ShakerWinchester Double ArchWinchester Square Duet
a 3 stile and rail option will be offered at the standard 2 1/4 stile and rail price. No additional upcharge.b Napa drawer front available top drawer only.
IS168 March 1, 2007
These door groupings and categories do not represent all of the possible combinations.For specifications, please refer to the Technical Guide Door Styling Section.
DOOR STYLE CHARGESPRICE GROUP IV
DOOR STYLE CHARGES DRAWER FRONT CHARGESRoutedfor Glass
FrenchMullion 3 Stile & Rail Slab Paneled/ Paneled
Door Style Stand. Wood/FoilGloss/Foil Wood Foil/MDF
3 Stile & RailOption (SquareDoors Only) Wood Foil
w/ Mldg(Wood)
Paneled/MDFSlab
Paneledw/Mldg(Wood)
LIST PRICE $112 $82 $228 $189 $265No add.upcharge N/C $31 $54 $54 $105
BastilleBristol See Shaker See ShakerCascade Arch/SquareCountry French Arch/Sq a
Embassy b a
Essex a
FriscoGeorgian b a
Lakeshore b a
Lancaster Sq w/Newcastle Mldg a
Lincoln a
Newcastle a c
Seattle Groove Duet a
ShakerShaker Duet See ShakerShaker Groove See ShakerSummit Square w/ 3/8 Rope Mldg a c
Tuscany
PRICE GROUP VDOOR STYLE CHARGES DRAWER FRONT CHARGES
Routedfor Glass French Mullion 3 Stile & Rail Slab Paneled
Door Style Stand. WoodFoil/MDF Wood
Foil/MDF
3 Stile & RailOption (SquareDoors Only) Wood Foil
w/ Molding(Wood) MDF Paneled Paneled
Paneledw/Molding(Wood)
LIST PRICE $150 $82 $228 $189 $322No add.upcharge N/C $39 $54 $86 $54 $105 $150
Aspen Arch/SqMarquis c
PillowPioneer c
Prairie c
Presidential c
Saxony c
SPECIALTY DOORSDOOR STYLE CHARGES DRAWER FRONT CHARGES
French Mullion 3 Stile & Rail Slab Paneled
Door Style StandardRoutedfor Glass Wood
Foil/MDF
3 Stile & RailOption (SquareDoors Only) Wood Foil
w/ Molding(Wood)
Paneled/MDF Slab
Paneledw/Molding(Wood)
LIST PRICESeeBelow
SeeBelow
SeeBelow
SeeBelow
No add.upcharge N/C
SeeBelow
SeeBelow
SeeBelow
SeeBelow
Cabana $ 277 $ 31 $ 137 standardPanama $ 477 $ 31 $ 137 standardPanama w/ Essex Molding $ 528 $ 82 $ 189 standard $ 54Panama w/ Embassy Mldg $ 528 standardVeranda $ 277 $ 31 $ 137 standarda 3 stile and rail option will be offered at the standard
2 1/4 stile and rail price. No additional upcharge.b Georgian and Embassy French doors will not have molding applied.c Flat panel drawer fronts available only.
Some paneled drawer fronts cannot have raised center panels,but can be made with a flat panel.(For example, Newcastle with a flat panel is the same as Lincoln.)
SPECIALTY DRAWERSDrawer Style StandardHastings $ 105 ListNapa $ 54 List
IS169March 1, 2007
DOOR STYLE CHARGESALPHABETICAL CROSS REFERENCE BY DOOR STYLE NAME
Door Style Price Group Door TypeAlero Arch/Square III Foil Paneled
Aspen Arch/Square V Foil Paneled
Bastille IV French
Birmingham Arch/Square II Flat Panel
Bristol IV Foil Paneled
Cabana Specialty Bamboo Insert Panel
Cascade Arch/Square IV Foil Paneled
Cedarcreek II Mitered Raised Panel
Contemporary I Slab
Country French Arch/Square IV French
Edgewater III Mitered Flat Panel
Embassy IV Flat Panel with Molding
Engelbrook III Mitered Raised Panel
Essex IV Flat Panel with Molding
Frisco IV Slab
Geneva Mel/HPL I Slab
Georgian IV Raised Panel with Molding
Harrisburg Arch/Square II Raised Panel
Harrisburg II III Raised Panel
Italia II Foil Slab
Jamestown I Slab
Kingston Arch/Square II Flat Panel
Lakeshore IV Mitered Raised Panel with Molding
Lancaster Arch/Square II Raised Panel
Lancaster Double Arch III Raised Panel
Lancaster Square Duet III Raised Panel
Lancaster Square with Newcastle Molding IV Raised Panel with Molding
Lexington Arch/Square II Raised Panel
Lexington Double Arch III Raised Panel
Lexington Square Duet III Raised Panel
Lexus Arch/Square II Foil Paneled
Lincoln IV Flat Panel with Molding
Marquis V Mitered Raised Panel with Rope Inlay
Mission I Flat Panel
Munich III Slab
Newcastle IV Raised Panel with Molding
Panama Specialty Lattice Insert Panel
Panama with Embassy Molding Specialty Lattice Insert Panel with Molding
Panama with Essex Molding Specialty Lattice Insert Panel with Molding
Petersburg Arch/Square II Flat Panel
Phoenix I Flat Panel
Pillow V Veneer Wrapped
Pioneer V Flat Panel
Portland Supreme II Raised Panel
Portland Supreme Duet III Raised Panel
Prairie V Flat Panel
Presidential V Mitered Raised Panel
Prism II Foil Slab
Regency II Raised Panel
Riverside III Mitered Raised Panel
Saxony V Mitered Raised Panel with Rope Inlay
Seattle II Flat Panel
Seattle Duet III Flat Panel
IS170 March 1, 2007
DOOR STYLE CHARGESALPHABETICAL CROSS REFERENCE BY DOOR STYLE NAME (CONTINUED)
Door Style Price Group Door TypeSeattle Groove III Flat Panel
Seattle Groove Duet IV Flat Panel
Shaker IV Foil Paneled
Shaker Duet IV Foil Paneled
Shaker Groove IV Foil Paneled
Springdale III Mitered Raised Panel
Summit Arch/Square II Raised Panel
Summit Square with 3/8 Rope Molding IV Raised Panel with Molding
Tahoe III Foil Slab
Tuscany IV Raised Panel
Ultima Arch/Square III Foil Paneled
Veranda Specialty Wicker/Rattan Insert Panel
Wiltshire Arch/Square II Flat Panel
Winchester Arch/Square II Raised Panel
Winchester Double Arch III Raised Panel
Winchester Square Duet III Raised Panel
SPECIAL ORDER DOORSStainless Steel Fax factory for quote. . . . . . . . . . . . . . . . . . . . .Aluminum Frame with Glass Fax factory for quote. . . . . . . . .
RADIUS DOORSAdd to cabinet box price.Radius routed Harrisburg arched and square doors are the same price as a radius panel door.Radius french Harrisburg arched and square doors are the same price as a radius panel door plus $132 per lite.
DOOR STYLE HEIGHT 12 CONCAVE 12 CONVEX 24 CONVEX (2 DOORS)
Geneva* standard $ 623 $ 623 N/A
Munich* standard 623 623 N/A
up to 32 2075 2075 $ 3247
up to 38 2477 2477 3861
Harrisburg Archedup to 44 2880 2880 4478
Harrisburg Archedup to 50 3282 3282 5093
up to 56 3684 3684 5707
up to 62 4086 4086 6323
up to 32 1640 1640 2597
up to 38 1950 1950 3075
Harrisburg Squareup to 44 2262 2262 3556
Harrisburg Squareup to 50 2571 2571 4033
up to 56 2885 2885 4511
up to 62 3197 3197 4989
* Geneva and Munich radius doors will not be guaranteed over 41 13/16 finished height.
Edges available: #300#600#850
Exotic Veneer Doors: see Technical Guide Door Styling Section for details and availability of veneers(Frisco and Munich door styles).
IS171March 1, 2007
HOLIDAY KITCHENS120 West Allen StreetRice Lake, WI 54868
Voice: (715) 736-9200 FAX: 1-800-497-4314
www.holidaykitchens.com
email to: [email protected]
Effective March 1, 2007
IDC ESTATE CABINETS
QualityDesigned forQualityLiving
Cabinet Specification Guide
March 1, 2007
IDC ESTATE INDEXProduct Catalog# Page#
BASE CABINETS:
Accent Strips IE2360 30Angle Corner Shelf IE2210 28Angled Base IE2107 26Angled End IE2106 26Angled End Panel IE2370 31Base (Standard) IE2000 23With Breadboard IE2040 24With Rollouts IE2020 23With Rollouts and Breadboard IE2050 24With Tray Dividers IE2330 29With Wastebasket IE2060 24With Wastebasket and Breadboard IE2070 24
Blind Corner IE2110 26Diagonal Corner IE2160 27Diagonal Corner (Full Height) IE2170 27Diagonal Corner Sink IE2300 29Diagonal Corner Sink Front IE2310 29Diagonal Corner With Super Susans IE2180 27Diagonal Corner With Super Susans(Full Height)
IE2190 27
End Panel (3/4 ) IE2380 31End Panel (Angled) IE2370 31Fillers IE2350 30Fillers W/ Half Spool & Rod Post Attached IE2355 30Five Drawer IE2105 26Four Drawer IE2090 25Four Drawer With Breadboard IE2100 25Full Height (24 d) IE2010 23Full Height Wall (12 d) IE2030 23Full Height Diagonal Corner IE2170 27Half/Corner Round Shelves IE2205 28Peninsula Corner IE2120 26Range Front (16 h) IE2230 28Silverware Divider IE2390 31Sink IE2240 28Sink (Clipped Corners) IE2250 28Sink (Diagonal Corner) IE2300 29Sink (Square Corner) IE2280 29Sink With Tilt Out IE2320 29Sink Front IE2270 29Sink Front (Diagonal Corner) IE2310 29Slide Out Towel Bar IE2395 31Spice Drawer (12 Deep) IE2340 30Square Corner IE2140 27Square Corner Sink IE2280 29Square Corner With Super Susans IE2150 27Standard Base IE2000 23With Breadboard IE2040 24With Rollouts IE2020 23With Rollouts and Breadboard IE2050 24With Tray Dividers IE2330 29With Wastebasket IE2060 24With Wastebasket and Breadboard IE2070 24
Product Catalog# Page#
BASE CABINETS (CONTINUED):
Three Drawer IE2080 25Three Drawer with Breadboard IE2085 25Towel Bar (Slide Out) IE2395 31Transition IE2220 28
DISHWASHER PANELS IE6110 61
DOOR SAMPLES:
DRA IE6180 62FFA IE6170 62
FACE FRAME MATERIAL IE6100 61
FILLERS:
Base Fillers IE2350 30Base Fillers With Half Spool &Rod Post Attached
IE2355 30
Tall Fillers IE3200 39Tall Fillers With Half Spool &Rod Post Attached
IE3205 39
Vanity Fillers IE5270 55Vanity Fillers With Half Spool &Rod Post Attached
IE5275 56
Wall Fillers IE1800 21Wall Fillers With Half Spool &Rod Post Attached
IE1805 21
FINISH MATERIALS IE6140 62
FINISH PRICING IE6130 61
HARDWOOD (SOLID) IE6090 61
MATERIAL PRICING IE6120 61
MISCELLANEOUS ACCESSORIES:
Dishwasher Panels IE6110 61
DRA Door Sample IE6180 62
FFA Door Sample IE6170 62
Face Frame Material IE6100 61
Finish Materials IE6140 62
Finish Pricing IE6130 61
Hardwood (Solid) IE6090 61Material Pricing IE6120 61Mini Base Sample IE6160 62Moldings (Foil Wrapped) IE6050 60Moldings (Laminate) IE6060 60Moldings (Wood) IE6040 59Panel (1/4 Fibercore Island) IE6080 60Paneling IE6070 60Soffit Closure Panel IE6030 57Solid Material IE6100 61Specie/Finish Options IE6120 61Stain Sample IE6150 62Valances (Arched) IE6010 57Valances (Laminate/Veneer) IE6020 57Valances (Wood) IE6000 57Wainscot IE6115 61
MINI BASE SAMPLE IE6160 62
iMarch 1, 2007
IDC ESTATE INDEXProduct Catalog# Page#
MOLDINGS:
Foil Wrapped IE6050 60Laminate IE6060 60Wood IE6040 59
OVEN CABINETS:
Double (84 h x 24 d) IE4030 42Double (90 h x 24 d) IE4040 42Double (93 h x 24 d) IE4045 42Double (96 h x 24 d) IE4050 42Micro (84 h x 24 d) IE4060 43Micro (90 h x 24 d) IE4070 43Micro (93 h x 24 d) IE4075 43Micro (96 h x 24 d) IE4080 43Single (84 h x 24 d) IE4000 41Single (90 h x 24 d) IE4010 41Single (93 h x 24 d) IE4015 41Single (96 h x 24 d) IE4020 41
PANEL (1/4 FIBERCORE ISLAND) IE6080 60
PANELING IE6070 60
REFRIGERATOR END PANELS IE3190 39
SINK BASE:
Base Cabinet Sink Base IE2240 28Base Cabinet Sink Base (Diagonal Corner) IE2300 29Base Cabinet Sink Base (Square Corner) IE2280 29Base Cabinet Sink Base (Clipped Corners) IE2250 28Base Cabinet Sink Base With Tilt Out IE2320 29Vanity Cabinet Sink Base IE5050 48Vanity Cabinet Sink Base (Tall) IE5060 49
SINK DRAWER:
Vanity Cabinet Sink Drawer IE5100 50Vanity Cabinet Sink Drawer (Tall) IE5110 51
SINK FRONT:
Base Cabinet Sink Front IE2270 29Base Cabinet Sink Front (Diagonal Corner) IE2310 29Vanity Cabinet Sink Front IE5070 49
SOFFIT CLOSURE PANEL: IE6030 57
SOLID HARDWOOD IE6090 61
SOLID MATERIAL IE6100 61
STAIN SAMPLE IE6150 62
STAIN (QUART, GALLON) IE6140 62
TALL CABINETS:
Accent Strips IE3210 40Angled End Panel IE3220 40Broom Cabinets:Adjustable Shelves (84 h x 12 d) IE3030 34Adjustable Shelves (84 h x 24 d) IE3090 36Adjustable Shelves (90 h x 12 d) IE3040 34Adjustable Shelves (90 h x 24 d) IE3100 36Adjustable Shelves (93 h x 12 d) IE3045 34Adjustable Shelves (93 h x 24 d) IE3105 36Adjustable Shelves (96 h x 12 d) IE3050 34Adjustable Shelves (96 h x 24 d) IE3110 36
Product Catalog# Page#
TALL CABINETS (CONTINUED):
Broom Cabinets (Continued):Reverse W/Adj. Shlves (84 h x 24 d) IE3150 38Reverse W/Adj. Shlves (90 h x 24 d) IE3160 38Reverse W/Adj. Shlves (93 h x 24 d) IE3165 38Reverse W/Adj. Shlves (96 h x 24 d) IE3170 38Rollouts (84 h x 24 d) IE3120 37Rollouts (90 h x 24 d) IE3130 37Rollouts (93 h x 24 d) IE3135 37Rollouts (96 h x 24 d) IE3140 37Standard (84 h x 12 d) IE3000 33Standard (84 h x 24 d) IE3060 35Standard (90 h x 12 d) IE3010 33Standard (90 h x 24 d) IE3070 35Standard (93 h x 12 d) IE3015 33Standard (93 h x 24 d) IE3075 35Standard (96 h x 12 d) IE3020 33Standard (96 h x 24 d) IE3080 35
Fillers IE3200 39Fillers W/ Half Spool & Rod Post Attached IE3205 39Refrigerator End Panels IE3190 39
TOP COAT SPRAY IE6140 62
TOUCH-UP KIT IE6140 62
VALANCES:
Arched IE6010 57Laminate/Veneer IE6020 57Wood IE6000 57
VANITY CABINETS:
Accent Strips IE5280 56Base (Full Height) IE5005 45Base (Full Height), Tall IE5015 46Base (Standard) IE5000 45Base (Standard), Tall IE5010 46Combination Bowl Drawer Stack IE5120 51Combination Bowl Drawer Stack(False Drawer)
IE5125 51
Combination Bowl Drawer Stack (Tall) IE5130 51Combination Bowl Drawer Stack(Tall, False Drawer)
IE5135 52
Desk Drawer IE5080 49Double Bowl Drawer Stack IE5140 52Double Bowl Drawer Stack (Tall) IE5150 52Four Drawer (Tall) IE5040 48File Drawer (30 high) IE5085 50File Drawer (31 1/2 high) IE5090 50Fillers IE5270 55Fillers W/ Half Spool & Rod Post Attached IE5275 56Mirrored Medicine Cabinet IE5260 55Sink IE5050 48
Sink (Tall) IE5060 49Sink Drawer IE5100 50Sink Drawer (Tall) IE5110 51Sink Front IE5070 49
ii March 1, 2007
IDC ESTATE INDEXProduct Catalog# Page#
VANITY CABINETS (CONTINUED):
Tall Utility (84 h) IE5160 52Tall Utility Backsaver (84 h) IE5170 53Tall Drawer (84 h) With Three Drawers IE5180 53Tall Drawer (84 h) With Four Drawers IE5190 54Tapered Leg IE5220 54Three Drawer IE5020 47Three Drawer (Tall) IE5030 47
Tri-View Mirror IE5250 55Wall Cabinet (8 d) IE5210 54Wall Mount Bracket IE5230 54Wall Toilet Cabinet IE5240 55
WAINSCOT IE6115 61
WALL CABINETS:
12 High IE1000 112 High, 24 Deep IE1005 114 High, 24 Deep IE1007 115 High IE1010 115 High, 24 Deep IE1020 118 High IE1030 118 High, 24 Deep IE1035 220 High, 24 Deep IE1037 221 High IE1040 221 High, 24 Deep IE1050 224 High IE1060 224 High, 24 Deep IE1065 224 High, 26 Deep IE1067 327 High IE1070 327 High, 24 Deep IE1080 330 High IE1090 336 High IE1100 439 High IE1106 542 High IE1110 6Accent Strips IE1810 21Angle Corner Shelf IE1766 19Angled End IE1760 19Angled Wall IE1765 19Blind Corner (30 h) IE1180 7Blind Corner (36 h) IE1190 7Blind Corner (39 h) IE1195 8Blind Corner (42 h) IE1200 8Corner (Inside Radius) IE1768 20Corner (Outside Radius) IE1769 20Diagonal Corner30 h IE1280 930 h x 27 w x 15 d IE1550 1336 h IE1290 936 h x 27 w x 15 d IE1560 1339 h IE1295 939 h x 27 w x 15 d IE1565 1342 h IE1300 942 h x 27 w x 15 d IE1570 13With French Mullion Door (30 h) IE1340 10With French Mullion Door (36 h) IE1350 10
Product Catalog# Page#
WALL CABINETS (CONTINUED):
Diagonal Corner (Continued):With French Mullion Door (39 h) IE1355 10With French Mullion Door (42 h) IE1360 11With French Mullion Door(30 h x 27 w x 15 d)
IE1610 14
With French Mullion Door(36 h x 27 w x 15 d)
IE1620 14
With French Mullion Door(39 h x 27 w x 15 d)
IE1625 15
With French Mullion Door(42 h x 27 w x 15 d)
IE1630 15
With Routed For Glass Door (30 h) IE1310 9With Routed For Glass Door (36 h) IE1320 10With Routed For Glass Door (39 h) IE1325 10With Routed For Glass Door (42 h) IE1330 10With Routed For Glass Door(30 h x 27 w x 15 d)
IE1580 13
With Routed For Glass Door(36 h x 27 w x 15 d)
IE1590 14
With Routed For Glass Door(39 h x 27 w x 15 d)
IE1595 14
With Routed For Glass Door(42 h x 27 w x 15 d)
IE1600 14
With Tambour Garage (30 h) IE1400 11With Tambour Garage (36 h) IE1410 11With Tambour Garage (39 h) IE1415 11With Tambour Garage (42 h) IE1420 11With Tambour Garage &Routed For Glass Door (30 h)
IE1430 11
With Tambour Garage &Routed For Glass Door (36 h)
IE1440 12
With Tambour Garage &Routed For Glass Door (39 h)
IE1445 12
With Tambour Garage &Routed For Glass Door (42 h)
IE1450 12
With Tambour Garage &French Mullion Door (30 h)
IE1460 12
With Tambour Garage &French Mullion Door (36 h)
IE1470 12
With Tambour Garage &French Mullion Door (39 h)
IE1475 12
With Tambour Garage &French Mullion Door (42 h)
IE1480 13
Fillers IE1800 21Fillers W/ Half Spool & Rod Post Attached IE1805 21Finished Interior Cabinet With FrenchMullion Doors (30 h)
IE1095 4
Finished Interior Cabinet With RoutedFor Glass Doors (30 h)
IE1094 3
Finished Interior Cabinet With FrenchMullion Doors (36 h)
IE1105 5
Finished Interior Cabinet With RoutedFor Glass Doors (36 h)
IE1104 4
Finished Interior Cabinet With FrenchMullion Doors (39 h)
IE1108 6
Finished Interior Cabinet With RoutedFor Glass Doors (39 h)
IE1107 5
Finished Interior Cabinet With FrenchMullion Doors (42 h)
IE1115 7
iiiMarch 1, 2007
IDC ESTATE INDEXProduct Catalog# Page#
WALL CABINETS (CONTINUED):
Finished Interior Cabinet With RoutedFor Glass Doors (42 h)
IE1114 6
Microwave (36 h) IE1670 17Microwave (48 h) IE1690 17Open Shelf Below (18 h) IE1700 18Open Shelf Below (24 h) IE1710 18Open Shelf Below (27 h) IE1715 18Open Shelf Below (30 h) IE1720 18Pantry Spice Rack Cabinet IE1770 20Refrigerator Wall Cabinet (24 d x 12 h) IE1005 1Refrigerator Wall Cabinet (24 d x 14 h) IE1007 1Refrigerator Wall Cabinet (24 d x 15 h) IE1020 1Refrigerator Wall Cabinet (24 d x 18 h) IE1035 2Refrigerator Wall Cabinet (24 d x 20 h) IE1037 2Refrigerator Wall Cabinet (24 d x 21 h) IE1050 2Refrigerator Wall Cabinet (24 d x 24 h) IE1065 2Refrigerator Wall Cabinet (24 d x 26 h) IE1067 3Refrigerator Wall Cabinet (24 d x 27 h) IE1080 3Square Corner (30 h) IE1250 8Square Corner (36 h) IE1260 8Square Corner (39 h) IE1265 8Square Corner (42 h) IE1270 9Straight Wall With Tambour Garage (30 h) IE1640 15Straight Wall With Tambour Garage (36 h) IE1650 15Straight Wall With Tambour Garage (39 h) IE1655 16Straight Wall With Tambour Garage (42 h) IE1660 16Straight Wall With Three DrawerGarage (30 h)
IE1661 16
Straight Wall With Three DrawerGarage (36 h)
IE1662 16
Straight Wall With Three DrawerGarage (39 h)
IE1663 17
Straight Wall With Three DrawerGarage (42 h)
IE1664 17
Wine Glass Holder IE1780 20Wine Rack Shelf IE1790 21
iv March 1, 2007
ORDERING INFORMATIONLOCATING ITEMSEach group of similar items are located in the same area forlocating items easily. Prices are located along with each item inthe specification section. Price levels are as follows:
S M is for Contemporary, Mission, Phoenix, Geneva orGeneva HPL door styles with slab drawers.
S N is for Lancaster Square over Square, Lancaster Archover Square, Seattle, Prism or Italia door styles all withslab drawers.
S O is for Lancaster Square over Square, Lancaster Archover Square, Seattle, Riverside Mitered, andEdgewater Mitered door styles all with paneleddrawers; Munich door style with matching drawer;Shaker door style with slab drawers; Lexus Arch overSquare, Lexus Square over Square, Alero Arch overSquare and Alero Square over Square door styles withslab and paneled drawers.
S P is for Ultima Arch over Square, Ultima Square overSquare and Bristol door styles with slab and paneleddrawers; Shaker Duet and Shaker Groove door styleswith slab drawers; Shaker door style with paneleddrawers; Frisco door style with matching drawer.
SIZING OF ITEMSEach unit has a code attached to it. The codes are listed alongside the prices in the specification section. These codes refer tothe general dimensions of the cabinet box or item. In someinstances, the finished product may be slightly different fromthese dimensions (e.g. moldings applied to hoods).
Example:Code Width Height
Wall Cabinet IXW2430 24 30Base Cabinet IXB27 27 34 1/2
ORIGINAL KITCHEN ORDERSAll purchase order forms are available to the dealer at nocharge. Orders must be placed for additional forms. They canbe ordered on our website dealer’s area. Purchase order formsare self-explanatory, but please call the factory with anyquestions about abbreviations.
1. Use Holiday Kitchens’ approved IDC Estate purchase orderform cover page, page 2, or custom units with IDC Estateorder form on all IDC Estate orders. Use only IDC Estatenomenclature and codes to avoid unnecessary delays.These codes must be written in full on the order form.
2. Authorized signatures required on all orders.3. Include dealer’s list in provided area.4. No changes to any item in the IDC Estate line.5. If you choose to customize your IDC Estate kitchen, we
encourage you to do so by using the custom units withIDC Estate order form. No additional cover sheet isnecessary unless option selection is different than yourIDC Estate order. Orders of five or less units will ship atIDC Estate lead time. If separate orders are placed, e.g.Designer Line finish on Island Cabinets, etc., mark bothorders “Ship With ...” to receive together or “Ship Separate”to receive separately. Both orders will be put on the standardIDC manufacturing schedule.
6. Once orders are placed, no changes will be allowed. Dealersare responsible for all cabinets/items ordered.
7. Complete orders will be scheduled for production. If yourorder has missing or incorrect information, it is incompleteand will not be scheduled for production until necessaryinformation is received. This will delay your order.
8. An acknowledgement will be faxed for your records;however, no changes will be allowed because productionstarts immediately.
9. The departure date is printed on your acknowledgement.This is the day the truck is scheduled to leave the factory.Please remember to take into account travel time to yourlocation. Holiday Kitchens does not have warehouse spaceto hold orders.
March 1, 2007 IXOI1
NOTE: ALL ORDER FORMS ARE FINAL. NO CHANGES OR CANCELLATIONS ARE AVAILABLE.
IDC ESTATE DESIGN COLLECTIONPURCHASE ORDER FORM
Dealer Name:
Account Number:
Job Name: Page ofDATE CUSTOMER P.O. #
SALES PERSON
DEALER PHONE DEALER FAX
HOLIDAY KITCHENS120 West Allen Street
Rice Lake, Wisconsin 54868(715) 736-9200 Fax 1-800-497-4314
www.holidaykitchens.com
TO
NAME
TO
NAME PHONE
LTO
STREET
PTO
STREET
BILL
SHIP
B CITY STATE ZIP SH
CITY STATE ZIP
jSHIP WITH IDC ORDERSHIP VIA:
Check bothSPECIE andFINISH boxes
jOAKjCHARACTER OAK d
jMAPLEjCHARACTER MAPLE d
jCHERRYjCHARACTER CHERRY d
jHICKORYjCHARACTER HICKORY d
jALDERjCHARACTER ALDER
jAutumn
jButternut
jCanyon
jChablis
jHallmark
jLinen
jMeadow
jNatural
jPraline
jCameo w/Mink Wash “Matte”
jSnowdrift w/Mink Wash “Matte”
jNantucket w/Latte Wash “Matte”
jPraline w/Mink Wash
jSandalwood w/Mink Wash
jSandalwood
jSunrise
jUnfinished
jVillage
jAntq White L
jBone L
jIvory L
jNC-32 L
jWinter L
jChablis
jCntry Hearth
jFawn
jHallmark
jHarmony
jNatural
jPraline
jSandalwood
jSpice
jCameo w/Mink Wash “Matte”
jSnowdrift w/Mink Wash “Matte”
jNantucket w/Latte Wash “Matte”
jPraline w/Mink Wash
jSandalwood w/Mink Wash
jFawn w/Mink Wash
jUnfinished
jWoodridge
jAntq White L
jBone L
jIvory L
jNC-32 L
jWinter L
jAutumn
jButternut
jCanyon
jCntry Hearth
jFireside
jHallmark
jMeadow
jPraline w/Mink Wash
jSandalwood w/Mink Wash
jNatural
jPraline
jSandalwood
jSunrise
jUnfinished
jWoodridge
jAutumn
jButternut
jCanyon
jChablis
jHallmark
jLinen
jMeadow
jPraline w/Mink Wash
jSandalwood w/Mink Wash
jNatural
jPraline
jSandalwood
jSunrise
jUnfinished
jVillage
jAutumn
jButternut
jCanyon
jCntry Hearth
jFireside
jHallmark
jMeadow
jPraline w/Mink Wash
jSandalwood w/Mink Wash
jNatural
jPraline
jSandalwood
jSunrise
jUnfinished
jWoodridge
Check box forOVERLAY andDOOR STYLE
Check optionif applicable
INFORMATION REQUIRED TO PROCESS ORDER. CHECK PREFERENCE.
M:jContemporary, slab, #375 d
jContemporary, slab, #600 d
jGeneva, slabjGeneva HPL, slabjMission, 2 1/4 S&R, slab, #600 z d
jPhoenix, 2 1/4 S&R, slab, #650 d
N:jItalia, slabjLancaster A/S, 2 1/4 S&R, slab,#650 * d
jLancaster S/S, slab, 3 S&R, #650 *jLancaster S/S, 2 1/4 S&R, slab, #650 *jPetersburg A/S, 2 1/4 S&R, slab, #525 d
jPetersburg S/S, 2 1/4 S&R, slab, #525 d
jPetersburg S/S, 3 S&R, slab, #525 d
jPrism, slabjSeattle, 2 1/4 S&R, slab, #600 z
jSeattle, 3 S&R, slab, #600 z
S&R = Stiles & Rails
O:jAlero Ar/Sq, paneledjAlero Square, paneledjAlero Ar/Sq, slabjAlero Square, slabjEdgewater Mitered, paneled * d z }
jLancaster A/S, 2 1/4 S&R, panel, #650 * d
jLancaster S/S, paneled, 3 S&R, #650 *jLancaster S/S, 2 1/4 S&R, panel, #650 *jLexus Ar/Sq, paneledjLexus Square, paneledjLexus Ar/Sq, slabjLexus Square, slabjMunich, matchingjPetersburg A/S, 2 1/4 S&R, panel, #525 d
jPetersburg S/S, 2 1/4 S&R, panel, #525 d
jPetersburg S/S, 3 S&R, panel, #525 d
jRiverside Mitered, paneled * } d
jSeattle, 2 1/4 S&R, paneled, #600 z
jSeattle, 3 S&R, paneled, #600 z
jShaker, slab
P:jUltima A/S, paneledjUltima Square, paneledjUltima A/S, slabjUltima Square, slabjBristol, paneledjBristol, slabjShaker Duet, slabjShaker Groove, slabjShaker, paneledjFrisco, matching front
S&R = Stiles & Rails
d Doors NOT available Character* Doors available with highlight option
Doors NOT available Alderz Doors NOT available Harmony/Spice} Doors NOT available Hickory
Check optionif applicable
FOIL COLORS: jTextured White jTextured Antique White jSatin White jSatin Antique White
GENEVA OPTIONS: jWhite Melamine jNatural Maple Melamine
jHPL (specify color and number) ________________ upcharge may applyDEALER’S LIST: $_____________
Check bothCabinet Boxand FinishedEnd Type
Finished Ends: jWood jMatch Interior j HPLCabinet Box: jWhite Melamine j Natural Maple Melamine
jHOLIDAY jUPS jFEDEX jPICK-UP jCOMMON CARRIER jOTHER:
Check optionif applicable Highlight* Options on stains: j Pearl j Java j Smoke
Drawer: Dodd’s Undermount Full Extension Soft Close (standard)
Check Sheen box: j Standard (L Paints available with standard sheen only.) j MatteCheck option
03/01/07 -- DSOFY
“The undersigned hereby certifies that he or she has all necessary authority to execute this order on behalf of the purchaserand that purchaser will pay for the merchandise promptly, pursuant to seller’s terms of sale.”
Purchaser’s SignatureName and Title (Please print)
IDC ESTATE CABINET DETAILSCASEWORKIDC Estate cabinets are constructed using premium 45 lb.industrial board, wood dowels, and glue. Low pressure laminate(melamine) is applied to both interior and exterior of cabinetmembers using heat, pressure, and a thermal setting adhesive.Laminate is available in white or natural maple woodgrain. It issuitable for both vertical and horizontal applications and isresistant to most household hazards, fruit juices, alcohol,solvents, etc.Wall cabinet tops, bottoms, and sides are 3/4 thick. The topsand bottoms sit between and are doweled to the sides using8mm diameter dowel pins. All visible edges on the wall cabinettop and bottom are edgebanded to match the exterior top andbottom. All front edges are edgebanded to match the doors. Thelonger spans of wall bottoms may bow and need to be taken intoconsideration when designing the layout.Base cabinets have 3/4 thick sides and bottoms, with 3/4 thickcross-ties in front and back on the top of the cabinet. All frontedges are edgebanded to match the doors. Sides are extendedto floor and notched for toe board. No legs, no sockets.Backs of both wall and base cabinets are 1/4 thick premiumindustrial 45 lb. particle board. The backs are glued into groovesin the cabinet sides, tops, and bottoms. Walls have two hangingstrips. Bases have one hanging strip.Tall cabinet sides are extended down and notched for toe asstandard. Optional legs and leg sockets available if requested,no upcharge applies.Melamine tolerances are -.000 , +1/32 . Therefore, you must usefillers when installing cabinets between two specific points (e.g.between two walls). Cabinet widths can grow due to thesetolerances and finished ends when layed up with HPL or veneer.
SHELVESShelves are all 3/4 thick 45 lb. premium industrial board with lowpressure laminate applied to both sides. The front edge isbanded to match. Shelves are full depth, adjustable with metricgang drilling (32mm spacing), and are supported by metal shelf(spoon) clips. Longer spans of shelves may bow and need to betaken into consideration when designing the layout.
DOORSDoors are available in many different styles and constructions atdifferent price levels. See ordering information for selections orTechnical Guide for construction and styles.
DRAWERSStandard Drawer Box: 5/8 solid maple Dodd’s Dovetail drawerbox finished natural with soft close, full extension, self-closing,undermount guides. These guides are rated for 75 lbs. dynamicand for 100 lbs. static at half extended drawer.
TOE KICKA continuous 3/4 thick toe kick is sent in 8 lengths to beattached after cabinets are set. Apply adhesive to the ends ofthe toeboard for field attachment of edgebanding. Afterinstallation, toe kick is 4 1/2 tall, 2 back from cabinet front edge.
JOINING SCREWSMost cabinets have pre-drilled holes for the joining hardware.Use telescopic screws, supplied in the hardware box, in frontand back to fasten cabinets together. Any finished interiorcabinet will not be pre-drilled.
STANDARD MELAMINE COLORSColors: White
Natural Maple WoodgrainWhen ordering one of the two standard laminate colors, theexterior top and bottom edges of wall cabinets will be banded inmatching PVC. Also on standard colors, the interior and exteriorof the cabinet boxes will be the same color. The front edges willbe banded to match the cabinet doors and drawer fronts.
WOOD DOOR ORDERSMelamine cabinets with wood doors will have the front edgesbanded in woodgrain PVC or a matching solid color PVC unlessit is a finished interior cabinet, in which case the front edges willbe banded in real wood and stained to match. White and naturalmaple melamine interiors, tops, bottoms, and end panels arestandard. The top and bottom edges of the melamine wallcabinet will be banded to match the exterior top and bottom boxcolor on finished interior cabinets, the exterior bottoms willmatch the interiors. This should be taken into considerationwhen designing the kitchen layout.
HPL DOOR ORDERSAll Wilsonart, Pionite, Formica, and Nevamar solid colors can beprovided on the doors and drawer fronts. Please contactcustomer service for special pricing and pattern availability. Alldoors and drawers will be banded with matching PVC.Cabinets will have the front edges banded in matching PVC.Special color laminate cabinets will have white or natural maplewoodgrain interiors, tops, bottoms, and end panels. The top andbottom edges of the wall cabinet will be banded to match theexterior top and bottom box color.Not all special laminates have matching PVC banding colors. Ifin doubt, contact the factory for availability.Holiday Kitchens reserves the right to refuse any order andtakes no responsibility for shortages, discontinued product, ordye lot differences of laminated products.
CABINET CARE - LAMINATEProper care and maintenance will give you years of service andpride of ownership. After installation, wipe laminate areas with adamp, soft cloth. It may be necessary to use a mild liquiddetergent or a non-abrasive household cleaner. Rinse with waterand a clean, non-abrasive, damp cotton cloth when complete.Occasionally streaks or smudges may appear on new laminatedoors or end panels caused by contact adhesive. These may beremoved using a clean, non-abrasive cotton cloth and anadhesive solvent such as lacquer thinner. Read and follow allwarnings and instructions on the container label. Self cleaningwaxes can be used to provide a protective coat on laminatesurfaces. They can be used frequently and are available at yourlocal supermarket.
HARDWAREHardware is not included with the cabinets. Fingerpullroutes are not available.
IXCD1March 1, 2007
IDC ESTATE CABINET DETAILS
CABINET SPECIFICATIONSFinishes
Available Stains Available Paints Avail. Primer w/Wash Comb.
Avail. Stain w/Wash Comb.
Specie Autumn
Butternut
Canyon
Chablis
CountryHearth
Faw
n*
Fireside
Hallmark
Harmonyz
Linen
Meadow
Natural
Praline
Sandalwood
Spicez
Sunrise
Unfinished
Village
Woodridge
AntiqueWhite
Bone
Ivory
NC-32
Winter
Cam
eow/M
ink
Wash“M
atte”
Nantucketw/Latte
Wash“M
atte”
Snowdriftw/M
ink
Wash“M
atte”
Faw
nw/
MinkWash
Pralinew/
MinkWash
Sandalwoodw/
MinkWash
OAK X X X X X X X X X X X X X X X X X XOAK (PAINTED) X X X X XCHARACTER OAK d X X X X X X X X X X X X X X X X X XMAPLE X X X X X X X X X X X X X X X X XMAPLE (PAINTED) X X X X XCHARACTER MAPLEz X X X X X X X X X X X X X X X X XCHERRY X X X X X X X X X X X X X X XCHARACTER CHERRY d X X X X X X X X X X X X X X XHICKORY } X X X X X X X X X X X X X X XCHARACTER HICKORY }d X X X X X X X X X X X X X X XALDER X X X X X X X X X X X X X X XCHARACTER ALDER X X X X X X X X X X X X X X X
* Fawn ordered on a flat panel door requires a signed spray/no-wipe stain agreement, found in the Technical Guide with company policies.z Edgewater, Mission and Seattle NOT available Harmony or Spice.} Edgewater and Riverside NOT available Hickory.d Contemporary, Lancaster Arch, Petersburg, Phoenix, Mission, Edgewater and Riverside NOT available Character.Mission and Phoenix NOT available Alder.
Finish with Wash Combinations
PRIMERS WITH WASHES +20% KSTAINS WITH WASHES +15% K
SCameo with Mink Wash “Matte” – Available on Oak, MapleSNantucket with Latte Wash “Matte” – Available on Oak, MapleSSnowdrift with Mink Wash “Matte” – Available on Oak, MapleKAdd for wood species upcharge
SFawn with Mink Wash – Avaliable on Maple onlySPraline with Mink Wash – Avaliable on all wood speciesSSandalwood with Mink Wash – Avaliable on all wood speciesKAdd for wood species upcharge
Highlight Options on Stains
JAVA SMOKEPEARL
Highlighting is the process of applying a “glaze type” highlight to specific areas on doors, drawer fronts, moldings and accent strips.Areas that will receive a highlight include: outside edge profiles, panel raises, and inside stile profiles.These highlight options will be available at a 5% upcharge on the Riverside, Edgewater, and Lancaster door styles. Highlighting is onlyavailable on the IDC Estate line; IDC custom units can be ordered with highlighting only when ordered along with IDC Estate line.
Foil Color OptionsTEXTURED
ANTIQUE WHITESATINWHITE
TEXTUREDWHITE
SATINANTIQUE WHITE
Woodgrain Foil colors may be available - please call customer service if interested.
Geneva OptionsNATURAL MAPLE
MELAMINEHPLWHITE
MELAMINE
Patterns and woodgrains may be available - please call customer service if interested.
SHELVING
Wall Cabinets
0 - 18 0 shelves. . . . . . .
>18 - 24 1 shelf. . . . . . .
>24 - <36 2 shelves. . . . . . .
36 - 52 3 shelves. . . . . . .
Base Cabinets
Regular Base 1 shelf. . . . . . . . . . . . . . .
Base Full Height 2 shelves. . . . . . . . . . . . .
Sink Base 0 shelves. . . . . . . . . . . . . . . . . .
Tall Cabinets
Smaller openings; see cabinet block fornumber of shelves. Shelf package must bepurchased for larger opening.
Vanities
Base 1 shelf. . . . . . . . . . . . . . . . . . . . .
Base Full Height 2 shelves. . . . . . . . . . .
Sink Base 0 shelves. . . . . . . . . . . . . . . .
Tall Utility See Cabinet. . . . . . . . . . . . . . . . .block fornumber ofshelves
IXCD2 March 1, 2007
IDC ESTATE CABINET DETAILS
PRICE LEVEL SPECIFICATIONSPrice Level Door Style Drawers Edge Profile
Contemporary 375/600Mission d z 600
M Phoenix * d Slab 650MGeneva (White Melamine or Natural Maple Melamine)
Slab
Geneva HPLLancaster Arch d/Square * 650Lancaster Square/Square * 650
N Seattle z Slab 600NPrism
Slab
ItaliaLancaster Arch d/Square * 650Lancaster Square/Square * 650Seattle z Paneled 600Riverside Mitered * d }
Paneled
Edgewater Mitered * d z }
Shaker SlabMunich d Matching
O Lexus Arch/SquarePaneled
OLexus Square/Square
Paneled
Lexus Arch/SquareSlab
Lexus Square/SquareSlab
Alero Arch/SquarePaneled
Alero Square/SquarePaneled
Alero Arch/SquareSlab
Alero Square/SquareSlab
Ultima Arch/SquarePaneled
Ultima Square/SquarePaneled
Ultima Arch/SquareSlab
Ultima Square/SquareSlab
PBristol Paneled
PBristolShaker Duet SlabShaker Groove
Slab
Shaker PaneledFrisco d Matching 3mm banding
* Doors available with highlight option.Doors available Alder.
d Wood doors NOT available Character.z Edgewater, Mission and Seattle NOT available Harmony or Spice.} Edgewater and Riverside NOT available Hickory.
STANDARD/FOIL LAMINATE (MELAMINE)/HPL CROSS REFERENCE
HPL TO MATCH
Standard Laminate Wilsonart Pionite Formica
White Frosty White #1573-60 White #SW811 White#949
Maple Woodgrain Maple #WM851-F28
Standard FoilsSatin White #1573-60Textured White #SW811Satin Antique White #932-58Textured Antique White #1572-60
IXCD3March 1, 2007
IDC ESTATE CABINET DETAILS
HELPFUL HINTS
Wood SpeciesHoliday Kitchens offers eight wood species for their Estate line. See below for percent upcharges.
Alder N/C. . . . . . . . . . . . . . . . . . . . .Character Alder N/C. . . . . . . . . . .Cherry 15%. . . . . . . . . . . . . . . . . . . .Character Cherry 15%. . . . . . . . . .Hickory –5%. . . . . . . . . . . . . . . . . . .Character Hickory –5%. . . . . . . . .Maple 8%. . . . . . . . . . . . . . . . . . . .Character Maple 8%. . . . . . . . . .Oak N/C. . . . . . . . . . . . . . . . . . . . . .Character Oak N/C. . . . . . . . . . . .
FinishesAll non-premium upcharge finishes are available in Estate.
The following paints are available at a 5% upcharge:
Antique WhiteBoneIvoryNC32Winter
Wash OptionsHoliday Kitchens offers six combination Primer/Wash or Stain/Wash options. See below for percent upcharges.
Cameo Primer with Mink Wash “Matte” 20%. . . . . . . . .Nantucket Primer with Latte Wash “Matte” 20%. . . . . .Snowdrift Primer with Mink Wash “Matte” 20%. . . . . . .
Fawn Stain with Mink Wash 15%. . . . . . . . . . . . . . . . . . . .Praline Stain with Mink Wash 15%. . . . . . . . . . . . . . . . . .Sandalwood Stain with Mink Wash 15%. . . . . . . . . . . . .
HighlightAvailable at a 5% upcharge in three colors:
PearlJavaSmoke
Door and Drawer Style ChargesDoor/Drawer style charges are included in each price category.
Finished EndsSee each cabinet SKU for finished end charges. Finished ends are not included in cabinet pricing, except where noted.
IXCD4 March 1, 2007
IDC ESTATE CABINET DETAILS
WALL CABINETS
Hanging Strips: 1/2 x 2 13/16 .Every wall cabinet is equippedwith two hanging strips.
Housing: 3/4 industrialboard sides, tops andbottoms, 1/4 industrialboard back.
12
Tops and bottomsattached to sidesusing 8mm dowel pins.
Shelves: 3/4 industrial board withlaminate applied to both sides.Front edge banded to match.Shelves adjustable on metal(spoon) clips.
BASE CABINETS
Housing: 3/4 industrial boardtops, sides, and bottom, 1/4industrial board back. 3/4 thickcross-ties in front and back ontop of cabinet. Sides areextended to floor and notchedfor toe board.
Toeboard: 3/4 matching sent loosein 8 lengths. Toe kick is 4 1/2 tall,2 3/4 back from cabinet front edgeprior to toeboard being attached.
Shelves: 3/4 industrial board withlaminate applied to both sides.Front edge banded to match.Shelves adjustable on metal(spoon) clips.
24
30
34 1/2
Hanging Strips: 1/2 x 2 13/16 .Every base cabinet is equippedwith one hanging strip.
Tops and bottoms attached tosides using 8mm dowel pins.
2 3/4
IXCD5March 1, 2007
IDC ESTATE CABINET DETAILSDRAWER BOX
Dodd’s Dovetail
The drawer box used in the IDC EstateCabinet Line is 5/8 solid maple Dodd’sDovetail drawer box finished natural withsoft close, full extension, self-closing,undermount guides. These guides arerated for 75 lbs. dynamic and for 100 lbs.static at half extended drawer.
BLIND CORNER BASE
1. Allows for 6 pull (does not need to be pulled).2. Specify blind [L] or [R].3. Shelves are full depth and notched around hinge stile.4. 6 accent strip sent loose.5. 27 blind standard. Door and drawer openings vary.6. Adjacent cabinet must have 3 filler.
27
3 filler
3 accentstrip shown
BLIND CORNER WALL
1. Allows for 6 pull (does not need to be pulled).2. Specify blind [L] or [R].3. Shelves are full depth and notched around hinge stile.4. 6 accent strip sent loose.5. 15 blind standard. Door openings vary.6. Adjacent cabinet must have 3 filler.
15
3 filler
3 accentstrip shown
IXCD6 March 1, 2007
IDC ESTATE CABINET DETAILSBASE AND BACKSAVER VANITY VANITY BASE
6
24
4 1/2
34 1/2
4 1/2
6
2131 1/2
THREE DRAWER BASEAND THREE DRAWERBACKSAVER VANITY
THREE DRAWERVANITY BASE
6
12
4 1/2
12
34 1/2
4 1/2
13 1/2
7 1/2
6
31 1/2
FOUR DRAWER BASEAND FOUR DRAWERBACKSAVER VANITY
BROOM CABINETS
6
6
6
12
4 1/2
34 1/2
Standard Configuration
19 , 25 , 31
60 1/2
4 1/2
84 , 90 , 96
IXCD7March 1, 2007
IDC ESTATE CABINET DETAILSBROOM CABINET REVERSE
AND TALL VANITYTALL UTILITY CABINETS
VANITY TALL UTILITY
49 1/2 , 61 1/2
30
4 1/2
84 , 96
Standard Configuration
27
4 1/2
84
Standard Configuration
52 1/2
BROOM CABINET DRAWERSAND TALL VANITY
TALL DRAWER CABINETSVANITY TALL DRAWER
6
6
6
12
4 1/2
49 1/2 , 61 1/2
84 , 96
Standard Configuration
52 1/2
13 1/2
7 1/2
6
4 1/2
84
Standard Configuration
IXCD8 March 1, 2007
WALL CABINETSIE1000 12 High
Double Doors M N O PIXW2412 $ 309 $ 368 $ 368 $ 407IXW2712 311 369 369 408IXW3012 317 377 377 414IXW3312 336 396 396 434IXW3612 353 413 413 450
Double Doors With Vertical DividerIXW3912 373 432 432 470Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
No shelf.
IE1005 24 Deep, 12 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW301224 $ 433 $ 493 $ 493 $ 531IXW331224 469 528 528 566IXW361224 494 554 554 591
Double Doors With Vertical DividerIXW391224 506 566 566 603IXW421224 535 595 595 632Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
No shelf.
IE1007 24 Deep, 14 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW301424 $ 433 $ 493 $ 493 $ 531IXW331424 469 528 528 566IXW361424 494 554 554 591
Double Doors With Vertical DividerIXW391424 506 566 566 603IXW421424 535 595 595 632Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
No shelf.
IE1010 15 High
Double Doors M N O PIXW2415 $ 317 $ 377 $ 377 $ 414IXW2715 319 379 379 416IXW3015 327 386 386 424IXW3315 347 407 407 444IXW3615 363 423 423 461
Double Doors With Vertical DividerIXW3915 381 441 441 478Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
No shelf.
IE1020 24 Deep, 15 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW301524 $ 433 $ 493 $ 493 $ 531IXW331524 469 528 528 566IXW361524 494 554 554 591
Double Doors With Vertical DividerIXW391524 506 566 566 603IXW421524 535 595 595 632Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
No shelf.
IE1030 18 High
Double Doors M N O PIXW2418 $ 319 $ 379 $ 379 $ 416IXW2718 327 386 386 424IXW3018 342 401 401 439IXW3318 359 418 418 456IXW3618 373 432 432 470
Double Doors With Vertical DividerIXW3918 396 456 456 494Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
No shelf.
1March 1, 2007
WALL CABINETSIE1035 24 Deep, 18 High
Refrigerator Wall Cabinet
Double Doors M N O PIXW301824 $ 471 $ 531 $ 531 $ 568IXW331824 509 569 569 607IXW361824 537 597 597 634
Double Doors With Vertical DividerIXW391824 550 610 610 647IXW421824 580 639 639 677Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
No shelf.
IE1037 24 Deep, 20 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW302024 $ 471 $ 531 $ 531 $ 568IXW332024 509 569 569 607IXW362024 537 597 597 634
Double Doors With Vertical DividerIXW392024 550 610 610 647IXW422024 580 639 639 677Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
One adjustable shelf.
IE1040 21 High
Double Doors M N O PIXW2421 $ 323 $ 383 $ 383 $ 421IXW2721 336 396 396 434IXW3021 359 418 418 456IXW3321 369 430 430 468IXW3621 383 443 443 480
Double Doors With Vertical DividerIXW3921 409 469 469 506Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
One adjustable shelf.
IE1050 24 Deep, 21 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW302124 $ 471 $ 531 $ 531 $ 568IXW332124 509 569 569 607IXW362124 537 597 597 634
Double Doors With Vertical DividerIXW392124 550 610 610 647IXW422124 580 639 639 677Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
1One adjustable shelf.
IE1060 24 High
Double Doors M N O PIXW2424 $ 323 $ 383 $ 383 $ 421IXW2724 336 396 396 434IXW3024 359 418 418 456IXW3324 369 430 430 468IXW3624 383 443 443 480
Double Doors With Vertical DividerIXW3924 409 469 469 506Finished End (HPL) 32 32 32 32Finished End (Veneer) 57 57 57 57
One adjustable shelf.
IE1065 24 Deep, 24 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW302424 $ 512 $ 572 $ 572 $ 611IXW332424 554 614 614 651IXW362424 585 645 645 682
Double Doors With Vertical DividerIXW392424 599 659 659 697IXW422424 628 687 687 726Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
One adjustable shelf.
2 March 1, 2007
WALL CABINETSIE1067 24 Deep, 26 High
Refrigerator Wall Cabinet
Double Doors M N O PIXW302624 $ 512 $ 572 $ 572 $ 611IXW332624 554 614 614 651IXW362624 585 645 645 682
Double Doors With Vertical DividerIXW392624 599 659 659 697IXW422624 628 687 687 726Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
Two adjustable shelves.
IE1070 27 High
Double Doors M N O PIXW2427 $ 328 $ 388 $ 388 $ 425IXW2727 343 402 402 440IXW3027 369 430 430 468IXW3327 390 449 449 487IXW3627 407 466 466 504
Double Doors With Vertical DividerIXW3927 425 485 485 523Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63Two adjustable shelves.
IE1080 24 Deep, 27 HighRefrigerator Wall Cabinet
Double Doors M N O PIXW302724 $ 512 $ 572 $ 572 $ 611IXW332724 554 614 614 651IXW362724 585 645 645 682
Double Doors With Vertical DividerIXW392724 599 659 659 697IXW422724 628 687 687 726Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
Two adjustable shelves.
IE1090 30 High
Single Door M N O PIXW1030 $ 195 $ 225 $ 225 $ 243IXW1230 195 225 225 243IXW1530 219 249 249 268IXW1830 242 272 272 291IXW2130 263 292 292 312Double DoorsIXW2430 328 388 388 425IXW2730 343 402 402 440IXW3030 369 430 430 468IXW3330 390 449 449 487IXW3630 407 466 466 504Double Doors With Vertical DividerIXW3930 425 485 485 523IXW4230 468 527 527 565Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63Two adjustable shelves.
IE1094 30 High Finished Interior CabinetWith Routed for Glass Doors
Single Door M N O PIXW1530FRT $ 257 $ 257 $ 257 $ 299IXW1530FRTH (HPL) * 490 490 490 533IXW1530FRTV (Veneer) * 490 490 490 533IXW1830FRT 282 282 282 325IXW1830FRTH (HPL) * 515 515 515 559IXW1830FRTV (Veneer) * 515 515 515 559IXW2130FRT 304 304 304 348IXW2130FRTH (HPL) * 538 538 538 582IXW2130FRTV (Veneer) * 538 538 538 582Double DoorsIXW2430FRT 362 362 362 472IXW2430FRTH (HPL) * 619 619 619 705IXW2430FRTV (Veneer) * 619 619 619 705IXW2730FRT 383 383 383 489IXW2730FRTH (HPL) * 634 634 634 721IXW2730FRTV (Veneer) * 634 634 634 721IXW3030FRT 398 398 398 676IXW3030FRTH (HPL) * 672 672 672 949IXW3030FRTV (Veneer) * 672 672 672 949IXW3330FRT 417 417 417 694IXW3330FRTH (HPL) * 691 691 691 967IXW3330FRTV (Veneer) * 691 691 691 967IXW3630FRT 436 436 436 712IXW3630FRTH (HPL) * 709 709 709 985IXW3630FRTV (Veneer) * 709 709 709 985Finished End (must specify) N/C N/C N/C N/CTwo adjustable shelves.* Includes finished interior. Melamine box - routed doors.Routed for glass doors.
3March 1, 2007
WALL CABINETSIE1095 30 High Finished Interior Cabinet
With French Mullion Doors
Single Door M N O P
IXW1530FF $ 347 $ 347 $ 347 $ 455
IXW1530FFH (HPL) * 580 580 580 688IXW1530FFV (Veneer) * 580 580 580 688IXW1830FF 372 372 372 480IXW1830FFH (HPL) * 605 605 605 714IXW1830FFV (Veneer) * 605 605 605 714
IXW2130FF 394 394 394 503
IXW2130FFH (HPL) * 628 628 628 737IXW2130FFV (Veneer) * 628 628 628 737
Double Doors
IXW2430FF 565 565 565 782
IXW2430FFH (HPL) * 799 799 799 1016IXW2430FFV (Veneer) * 799 799 799 1016IXW2730FF 582 582 582 799IXW2730FFH (HPL) * 815 815 815 1032IXW2730FFV (Veneer) * 815 815 815 1032
IXW3030FF 618 618 618 1008
IXW3030FFH (HPL) * 891 891 891 1281IXW3030FFV (Veneer) * 891 891 891 1281
IXW3330FF 636 636 636 1026
IXW3330FFH (HPL) * 909 909 909 1299IXW3330FFV (Veneer) * 909 909 909 1299IXW3630FF 654 654 654 1044IXW3630FFH (HPL) * 928 928 928 1318IXW3630FFV (Veneer) * 928 928 928 1318Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.* Includes finished interior.Melamine box - french doors.
French mullion doors with six lites.
IE1100 36 High
Single Door M N O PIXW1036 $ 227 $ 257 $ 257 $ 275IXW1236 227 257 257 275IXW1536 249 279 279 298IXW1836 272 302 302 321IXW2136 289 319 319 337Double DoorsIXW2436 347 407 407 444IXW2736 383 443 443 480IXW3036 415 475 475 512IXW3336 447 507 507 544IXW3636 472 532 532 569Double Doors With Vertical DividerIXW3936 480 540 540 579IXW4236 516 575 575 614Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74Three adjustable shelves.
IE1104 36 High Finished Interior CabinetWith Routed For Glass Doors
Single Door M N O PIXW1536FRT $ 289 $ 289 $ 289 $ 332IXW1536FRTH (HPL) * 522 522 522 565IXW1536FRTV (Veneer) * 522 522 522 565IXW1836FRT 316 316 316 359IXW1836FRTH (HPL) * 550 550 550 592IXW1836FRTV (Veneer) * 550 550 550 592IXW2136FRT 334 334 334 378IXW2136FRTH (HPL) * 568 568 568 611IXW2136FRTV (Veneer) * 568 568 568 611Double DoorsIXW2436FRT 388 388 388 493IXW2436FRTH (HPL) * 639 639 639 726IXW2436FRTV (Veneer) * 639 639 639 726IXW2736FRT 404 404 404 534IXW2736FRTH (HPL) * 681 681 681 767IXW2736FRTV (Veneer) * 681 681 681 767IXW3036FRT 444 444 444 721IXW3036FRTH (HPL) * 717 717 717 995IXW3036FRTV (Veneer) * 717 717 717 995IXW33336FRT 473 473 473 749IXW3336FRTH (HPL) * 746 746 746 1023IXW3336FRTV (Veneer) * 746 746 746 1023IXW3636FRT 501 501 501 777IXW3636FRTH (HPL) * 774 774 774 1051IXW3636FRTV (Veneer) * 774 774 774 1051Finished End (must specify) N/C N/C N/C N/CThree adjustable shelves.* Includes finished interior. Melamine box - routed doors.Routed for glass doors.
4 March 1, 2007
WALL CABINETSIE1105 36 High Finished Interior Cabinet
With French Mullion Doors
Single Door M N O PIXW1536FF $ 379 $ 379 $ 379 $ 487IXW1536FFH (HPL) * 612 612 612 720IXW1536FFV (Veneer) * 612 612 612 720IXW1836FF 406 406 406 514IXW1836FFH (HPL) * 639 639 639 747IXW1836FFV (Veneer) * 639 639 639 747IXW2136FF 424 424 424 533IXW2136FFH (HPL) * 658 658 658 766IXW2136FFV (Veneer) * 658 658 658 766Double DoorsIXW2436FF 586 586 586 803IXW2436FFH (HPL) * 819 819 819 1036IXW2436FFV (Veneer) * 819 819 819 1036IXW2736FF 627 627 627 845IXW2736FFH (HPL) * 860 860 860 1077IXW2736FFV (Veneer) * 860 860 860 1077IXW3036FF 663 663 663 1054IXW3036FFH (HPL) * 937 937 937 1327IXW3036FFV (Veneer) * 937 937 937 1327IXW3336FF 692 692 692 1082IXW3336FFH (HPL) * 966 966 966 1355IXW3336FFV (Veneer) * 966 966 966 1355IXW3636FF 720 720 720 1110IXW3636FFH (HPL) * 994 994 994 1383IXW3636FFV (Veneer) * 994 994 994 1383Finished End (must specify) N/C N/C N/C N/CThree adjustable shelves.* Includes finished interior.Melamine box - french doors.
French mullion doors with eight lites.
IE1106 39 High
Single Door M N O PIXW1039 $ 236 $ 266 $ 266 $ 285IXW1239 236 266 266 285IXW1539 266 296 296 315IXW1839 292 322 322 342IXW2139 319 349 349 367Double DoorsIXW2439 374 433 433 471IXW2739 407 466 466 504IXW3039 437 496 496 534IXW3339 462 522 522 559IXW3639 473 533 533 570Double Doors With Vertical DividerIXW3939 492 552 552 589IXW4239 533 592 592 630Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85Three adjustable shelves.
IE1107 39 High Finished Interior CabinetWith Routed For Glass Doors
Single Door M N O PIXW1539FRT $ 308 $ 308 $ 308 $ 351IXW1539FRTH (HPL) * 541 541 541 585IXW1539FRTV (Veneer) * 541 541 541 585IXW1839FRT 338 338 338 382IXW1839FRTH (HPL) * 572 572 572 616IXW1839FRTV (Veneer) * 572 572 572 616IXW2139FRT 369 369 369 413IXW2139FRTH (HPL) * 602 602 602 715IXW2139FRTV (Veneer) * 602 602 602 715Double DoorsIXW2439FRT 415 415 415 524IXW2439FRTH (HPL) * 671 671 671 757IXW2439FRTV (Veneer) * 671 671 671 757IXW2739FRT 440 440 440 560IXW2739FRTH (HPL) * 707 707 707 794IXW2739FRTV (Veneer) * 707 707 707 794IXW3039FRT 465 465 465 742IXW3039FRTH (HPL) * 739 739 739 1015IXW3039FRTV (Veneer) * 739 739 739 1015IXW3339FRT 484 484 484 760IXW3339FRTH (HPL) * 757 757 757 1034IXW3339FRTV (Veneer) * 757 757 757 1034IXW3639FRT 502 502 502 778IXW3639FRTH (HPL) * 775 775 775 1053IXW3639FRTV (Veneer) * 775 775 775 1053Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.* Includes finished interior.Melamine box - routed doors.
Routed for glass doors.
5March 1, 2007
WALL CABINETSIE1108 39 High Finished Interior Cabinet
With French Mullion Doors
Double Doors M N O P
IXW1539FF $ 398 $ 398 $ 398 $ 507
IXW1539FFH (HPL) * 631 631 631 740
IXW1539FFV (Veneer) * 631 631 631 740
IXW1839FF 428 428 428 537
IXW1839FFH (HPL) * 662 662 662 771
IXW1839FFV (Veneer) * 662 662 662 771
IXW2139FF 460 460 460 568
IXW2139FFH (HPL) * 692 692 692 1026
IXW2139FFV (Veneer) * 692 692 692 1026
Double Doors
IXW2439FF 617 617 617 834
IXW2439FFH (HPL) * 851 851 851 1068
IXW2439FFV (Veneer) * 851 851 851 1068
IXW2739FF 653 653 653 870
IXW2739FFH (HPL) * 887 887 887 1104
IXW2739FFV (Veneer) * 887 887 887 1104
IXW3039FF 684 684 684 1074
IXW3039FFH (HPL) * 958 958 958 1348
IXW3039FFV (Veneer) * 958 958 958 1348
IXW3339FF 703 703 703 1093
IXW3339FFH (HPL) * 977 977 977 1367
IXW3339FFV (Veneer) * 977 977 977 1367
IXW3639FF 721 721 721 1111
IXW3639FFH (HPL) * 995 995 995 1385
IXW3639FFV (Veneer) * 995 995 995 1385
Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.* Includes finished interior.Melamine box - french doors.
French mullion doors with eight lites.
IE1110 42 High
Single Door M N O PIXW1042 $ 236 $ 266 $ 266 $ 285IXW1242 236 266 266 285IXW1542 266 296 296 315IXW1842 292 322 322 342IXW2142 319 349 349 367Double DoorsIXW2442 374 433 433 471IXW2742 407 466 466 504IXW3042 437 496 496 534IXW3342 462 522 522 559IXW3642 473 533 533 570Double Doors With Vertical DividerIXW3942 492 552 552 589IXW4242 533 592 592 630Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85Three adjustable shelves.
IE1114 42 High Finished Interior CabinetWith Routed For Glass Doors
Single Door M N O PIXW1542FRT $ 308 $ 308 $ 308 $ 351IXW1542FRTH (HPL) * 541 541 541 585IXW1542FRTV (Veneer) * 541 541 541 585IXW1842FRT 338 338 338 382IXW1842FRTH (HPL) * 572 572 572 616IXW1842FRTV (Veneer) * 572 572 572 616IXW2142FRT 369 369 369 413IXW2142FRTH (HPL) * 602 602 602 715IXW2142FRTV (Veneer) * 602 602 602 715Double DoorsIXW2442FRT 415 415 415 524IXW2442FRTH (HPL) * 671 671 671 757IXW2442FRTV (Veneer) * 671 671 671 757IXW2742FRT 440 440 440 560IXW2742FRTH (HPL) * 707 707 707 794IXW2742FRTV (Veneer) * 707 707 707 794IXW3042FRT 465 465 465 742IXW3042FRTH (HPL) * 739 739 739 1015IXW3042FRTV (Veneer) * 739 739 739 1015IXW3342FRT 484 484 484 760IXW3342FRTH (HPL) * 757 757 757 1034IXW3342FRTV (Veneer) * 757 757 757 1034IXW3642FRT 502 502 502 778IXW3642FRTH (HPL) * 775 775 775 1053IXW3642FRTV (Veneer) * 775 775 775 1053Finished End (must specify) N/C N/C N/C N/CThree adjustable shelves.* Includes finished interior.Melamine box - routed doors.
Routed for glass doors.
6 March 1, 2007
WALL CABINETSIE1115 42 High Finished Interior Cabinet
With French Mullion Doors
Double Doors M N O P
IXW1542FF $ 398 $ 398 $ 398 $ 507
IXW1542FFH (HPL) * 631 631 631 740
IXW1542FFV (Veneer) * 631 631 631 740
IXW1842FF 428 428 428 537
IXW1842FFH (HPL) * 662 662 662 771
IXW1842FFV (Veneer) * 662 662 662 771
IXW2142FF 460 460 460 568
IXW2142FFH (HPL) * 692 692 692 1026
IXW2142FFV (Veneer) * 692 692 692 1026
Double Doors
IXW2442FF 617 617 617 834
IXW2442FFH (HPL) * 851 851 851 1068
IXW2442FFV (Veneer) * 851 851 851 1068
IXW2742FF 653 653 653 870
IXW2742FFH (HPL) * 887 887 887 1104
IXW2742FFV (Veneer) * 887 887 887 1104
IXW3042FF 684 684 684 1074
IXW3042FFH (HPL) * 958 958 958 1348
IXW3042FFV (Veneer) * 958 958 958 1348
IXW3342FF 703 703 703 1093
IXW3342FFH (HPL) * 977 977 977 1367
IXW3342FFV (Veneer) * 977 977 977 1367
IXW3642FF 721 721 721 1111
IXW3642FFH (HPL) * 995 995 995 1385
IXW3642FFV (Veneer) * 995 995 995 1385
Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.* Includes finished interior.Melamine box - french doors.
French mullion doors with ten lites.
IE1180 30 High Blind Corner
S 24 wide N/A with 3stile & rail doors orRiverside
Single Door M N O P
IXWBC2430 $ 295 $ 325 $ 325 $ 344IXWBC2730 316 346 346 365IXWBC3030 336 366 366 385IXWBC3330 362 392 392 411IXWBC3630 389 418 418 438
Double Doors
IXWBC3930 433 493 493 531IXWBC4230 457 518 518 555Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63
Two adjustable shelves.Must specify blind left or right on order form. Blind right is shown.Can be pulled 3 .6 accent strip sent loose.
IE1190 36 High Blind Corner
S 24 wide N/A with 3stile & rail doors orRiverside
Single Door M N O P
IXWBC2436 $ 326 $ 355 $ 355 $ 375IXWBC2736 357 386 386 406IXWBC3036 388 417 417 437IXWBC3336 416 446 446 465IXWBC3636 450 480 480 500
Double Doors
IXWBC3936 487 548 548 585IXWBC4236 520 580 580 617Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74
Three adjustable shelves.Must specify blind left or right on order form. Blind right is shown.Can be pulled 3 .6 accent strip sent loose.
7March 1, 2007
WALL CABINETSIE1195 39 High Blind Corner
S 24 wide N/A with 3stile & rail doors orRiverside
Single Door M N O P
IXWBC2439 $ 359 $ 389 $ 389 $ 408IXWBC2739 415 445 445 464IXWBC3039 415 445 445 464IXWBC3339 440 470 470 489IXWBC3639 471 501 501 520
Double Doors
IXWBC3939 521 581 581 618IXWBC4239 550 610 610 647Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Three adjustable shelves.Must specify blind left or right on order form. Blind right is shown.Can be pulled 3 .6 accent strip sent loose.
IE1200 42 High Blind Corner
S 24 wide N/A with 3stile & rail doors orRiverside
Single Door M N O P
IXWBC2442 $ 359 $ 389 $ 389 $ 408IXWBC2742 387 417 417 436IXWBC3042 415 445 445 464IXWBC3342 440 470 470 489IXWBC3642 471 501 501 520
Double Doors
IXWBC3942 521 581 581 618IXWBC4242 550 610 610 647Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Three adjustable shelves.Must specify blind left or right on order form. Blind right is shown.Can be pulled 3 .6 accent strip sent loose.
IE1250 30 High Square Corner
Blum Bi-Fold Doors M N O P
IXSCW242430 $ 542 $ 602 $ 602 $ 640Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63
Two adjustable shelves.Specify hinge left or hinge right.
IE1260 36 High Square Corner
Blum Bi-Fold Doors M N O P
IXSCW242436 $ 591 $ 651 $ 651 $ 689Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74
Three adjustable shelves.Specify hinge left or hinge right.
IE1265 39 High Square Corner
Blum Bi-Fold Doors M N O PIXSCW242439 $ 652 $ 712 $ 712 $ 749Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Three adjustable shelves.Specify hinge left or hinge right.
8 March 1, 2007
WALL CABINETSIE1270 42 High Square Corner
Blum Bi-Fold Doors M N O PIXSCW242442 $ 652 $ 712 $ 712 $ 749Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Three adjustable shelves.Specify hinge left or hinge right.
IE1280 30 High Diagonal Corner
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC2430 $ 416 $ 446 $ 446 $ 465Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63
Two adjustable shelves.
IE1290 36 High Diagonal Corner
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC2436 $ 448 $ 478 $ 478 $ 497Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74
Three adjustable shelves.
IE1295 39 High Diagonal Corner
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC2439 $ 469 $ 499 $ 499 $ 518Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Three adjustable shelves.
IE1300 42 High Diagonal Corner
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC2442 $ 469 $ 499 $ 499 $ 518Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Three adjustable shelves.
IE1310 30 High Diagonal CornerWith Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2430RT $ 431 $ 431 $ 431 $ 569Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63
Single Door, Finished InteriorIXDWC2430FRT 705 705 705 842Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.
9March 1, 2007
WALL CABINETSIE1320 36 High Diagonal Corner
With Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2436RT $ 463 $ 463 $ 463 $ 601Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74
Single Door, Finished InteriorIXDWC2436FRT 737 737 737 875Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1325 39 High Diagonal CornerWith Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2439RT $ 483 $ 483 $ 483 $ 621Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Single Door, Finished InteriorIXDWC2439FRT 757 757 757 975Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1330 42 High Diagonal CornerWith Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2442RT $ 483 $ 483 $ 483 $ 621Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Single Door, Finished InteriorIXDWC2442FRT 757 757 757 975Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1340 30 High Diagonal CornerWith French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2430FRN $ 540 $ 540 $ 540 $ 735Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63
Single Door, Finished InteriorIXDWC2430FFRN 814 814 814 1009Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.French door has six lites.
IE1350 36 High Diagonal CornerWith French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2436FRN $ 572 $ 572 $ 572 $ 768Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74
Single Door, Finished InteriorIXDWC2436FFRN 846 846 846 1041Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.French door has eight lites.
IE1355 39 High Diagonal CornerWith French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2439FRN $ 592 $ 592 $ 592 $ 788Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Single Door, Finished InteriorIXDWC2439FFRN 866 866 866 1061Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.French door has ten lites.
10 March 1, 2007
WALL CABINETSIE1360 42 High Diagonal Corner
With French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC2442FRN $ 592 $ 592 $ 592 $ 788Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Single Door, Finished InteriorIXDWC2442FFRN 866 866 866 1061Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.French door has ten lites.
IE1400 30 High Diagonal CornerWith 18 High Tambour Garage
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2430GBT $ 819 $ 849 $ 849 $ 867IXDWC2430GBTH (HPL) 960 990 990 1009IXDWC2430GBTV (Veneer) 960 990 990 1009
Two adjustable shelves.
IE1410 36 High Diagonal CornerWith 18 High Tambour Garage
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2436GBT $ 851 $ 881 $ 881 $ 899IXDWC2436GBTH (HPL) 993 1023 1023 1041IXDWC2436GBTV (Veneer) 993 1023 1023 1041
Three adjustable shelves.
IE1415 39 High Diagonal CornerWith 18 High Tambour Garage
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2439GBT $ 870 $ 900 $ 900 $ 919IXDWC2439GBTH (HPL) 1012 1042 1042 1061IXDWC2439GBTV (Veneer) 1012 1042 1042 1061
Three adjustable shelves.
IE1420 42 High Diagonal CornerWith 18 High Tambour Garage
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2442GBT $ 870 $ 900 $ 900 $ 919IXDWC2442GBTH (HPL) 1012 1042 1042 1061IXDWC2442GBTV (Veneer) 1012 1042 1042 1061
Three adjustable shelves.
IE1430 30 High Diagonal CornerWith Tambour Garage
& Routed For Glass DoorS Door is set back to create flush fronts;
if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2430GBTRT $ 834 $ 834 $ 834 $ 971IXDWC2430GBTFRTH (HPL) 975 975 975 1113IXDWC2430GBTFRTV (Veneer) 975 975 975 1113
Two adjustable shelves.
11March 1, 2007
WALL CABINETSIE1440 36 High Diagonal Corner
With Tambour Garage& Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2436GBTRT $ 866 $ 866 $ 866 $ 1003IXDWC2436GBTFRTH (HPL) 1008 1008 1008 1145IXDWC2436GBTFRTV (Veneer) 1008 1008 1008 1145
Two adjustable shelves.
IE1445 39 High Diagonal CornerWith Tambour Garage
& Routed For Glass DoorS Door is set back to create flush fronts;
if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2439GBTRT $ 885 $ 885 $ 885 $ 1023IXDWC2439GBTFRTH (HPL) 1027 1027 1027 1165IXDWC2439GBTFRTV (Veneer) 1027 1027 1027 1165
Three adjustable shelves.
IE1450 42 High Diagonal CornerWith Tambour Garage
& Routed For Glass DoorS Door is set back to create flush fronts;
if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2442GBTRT $ 885 $ 885 $ 885 $ 1023IXDWC2442GBTFRTH (HPL) 1027 1027 1027 1165IXDWC2442GBTFRTV (Veneer) 1027 1027 1027 1165
Three adjustable shelves.
IE1460 30 High Diagonal CornerWith Tambour Garage& French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are includedSingle Door M N O PIXDWC2430GBTFRN $ 943 $ 943 $ 943 $ 1137IXDWC2430GBTFFRNH (HPL) 1084 1084 1084 1279IXDWC2430GBTFFRNV (Veneer) 1084 1084 1084 1279Two adjustable shelves.French door has six lites.
IE1470 36 High Diagonal CornerWith Tambour Garage& French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are includedSingle Door M N O PIXDWC2436GBTFRN $ 975 $ 975 $ 975 $ 1169IXDWC2436GBTFFRNH (HPL) 1117 1117 1117 1311IXDWC2436GBTFFRNV (Veneer) 1117 1117 1117 1311Three adjustable shelves.French door has eight lites.
IE1475 39 High Diagonal CornerWith Tambour Garage& French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are includedSingle Door M N O PIXDWC2439GBTFRN $ 994 $ 994 $ 994 $ 1189IXDWC2439GBTFFRNH (HPL) 1136 1136 1136 1331IXDWC2439GBTFFRNV (Veneer) 1136 1136 1136 1331Three adjustable shelves.French door has eight lites.
12 March 1, 2007
WALL CABINETSIE1480 42 High Diagonal Corner
With Tambour Garage& French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
S 18 high garage is standard, specify17 high at no up charge
S Garage clearance: 16 w x 16 hS No back on garage areaS Orders with wood doors will receive
traditional wood tambourS Garage must be screwed to
countertop for proper operationS Code reflects entire unit construction,
both ends finished are included
Single Door M N O PIXDWC2442GBTFRN $ 994 $ 994 $ 994 $ 1189IXDWC2442GBTFFRNH (HPL) 1136 1136 1136 1331IXDWC2442GBTFFRNV (Veneer) 1136 1136 1136 1331
Three adjustable shelves.French door has ten lites.
IE1550 30 High Diagonal Corner27 Wide, 15 Deep
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC273015 $ 703 $ 733 $ 733 $ 752Finished End N/C N/C N/C N/C
Two adjustable shelves.Both ends finished automatically.
IE1560 36 High Diagonal Corner27 Wide, 15 Deep
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC273615 $ 757 $ 787 $ 787 $ 805Finished End N/C N/C N/C N/C
Three adjustable shelves.Both ends finished automatically.
IE1565 39 High Diagonal Corner27 Wide, 15 Deep
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC273915 $ 776 $ 806 $ 806 $ 825Finished End N/C N/C N/C N/C
Three adjustable shelves.Both ends finished automatically.
IE1570 42 High Diagonal Corner27 Wide, 15 Deep
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door M N O PIXDWC274215 $ 776 $ 806 $ 806 $ 825Finished End N/C N/C N/C N/C
Three adjustable shelves.Both ends finished automatically.
IE1580 30 High Diagonal Corner27 Wide, 15 Deep
With Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC273015RT $ 717 $ 717 $ 717 $ 856Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC273015FRT 838 838 838 977Finished End N/C N/C N/C N/C
Two adjustable shelves.Both ends finished automatically.
13March 1, 2007
WALL CABINETSIE1590 36 High Diagonal Corner
27 Wide, 15 DeepWith Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC273615RT $ 771 $ 771 $ 771 $ 909Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC273615FRT 871 871 871 1008Finished End N/C N/C N/C N/C
Three adjustable shelves.Both ends finished automatically.
IE1595 39 High Diagonal Corner27 Wide, 15 Deep
With Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC273915RT $ 791 $ 791 $ 791 $ 929Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC273915FRT 889 889 889 1028Finished End N/C N/C N/C N/C
Three adjustable shelves.Both ends finished automatically.
IE1600 42 High Diagonal Corner27 Wide, 15 Deep
With Routed For Glass Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC274215RT $ 791 $ 791 $ 791 $ 929Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC274215FRT 889 889 889 1028Finished End N/C N/C N/C N/C
Three adjustable shelves.Both ends finished automatically.
IE1610 30 High Diagonal Corner27 Wide, 15 Deep
With French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC273015FRN $ 827 $ 827 $ 827 $ 1023Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC273015FFRN 948 948 948 1143Finished End N/C N/C N/C N/C
Two adjustable shelves.French door has six lites.Both ends finished automatically.
IE1620 36 High Diagonal Corner27 Wide, 15 Deep
With French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC273615FRN $ 881 $ 881 $ 881 $ 1075Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC273615FFRN 979 979 979 1174Finished End N/C N/C N/C N/C
Three adjustable shelves.French door has eight lites.Both ends finished automatically.
14 March 1, 2007
WALL CABINETSIE1625 39 High Diagonal Corner
27 Wide, 15 DeepWith French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC273915FRN $ 900 $ 900 $ 900 $ 1095Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC273915FFRN 999 999 999 1193Finished End N/C N/C N/C N/C
Three adjustable shelves.French door has ten lites.Both ends finished automatically.
IE1630 42 High Diagonal Corner27 Wide, 15 Deep
With French Mullion Door
S Door is set back to create flush fronts;if no cabinet on side, you will be ableto see into cabinet
27
15
Top
Side
DoorTop View(note doorplacement)
Single Door, Standard Interior M N O PIXDWC274215FRN $ 900 $ 900 $ 900 $ 1095Finished End N/C N/C N/C N/C
Single Door, Finished InteriorIXDWC274215FFRN 999 999 999 1193Finished End N/C N/C N/C N/C
Three adjustable shelves.French door has ten lites.Both ends finished automatically.
IE1640 30 High Straight Wall With 18 HighTambour Garage
S 18 high garage is standard, specify17 high at no up charge
S Garage is made part of wall unit
S Garage clearance: 16 high
S Orders with wood doors will receivetraditional wood tambour
S Garage must be screwed tocountertop for proper operation
S Code reflects entire unit construction,both ends finished included
18
30
Single Door M N O P
IXW1830GBT $ 645 $ 675 $ 675 $ 693IXW1830GBTH (HPL) 826 856 856 875IXW1830GBTV (Veneer) 826 856 856 875
Double Doors
IXW2430GBT 730 790 790 827IXW2430GBTH (HPL) 912 971 971 1009IXW2430GBTV (Veneer) 912 971 971 1009IXW3030GBT 823 883 883 920IXW3030GBTH (HPL) 1017 1077 1077 1115IXW3030GBTV (Veneer) 1017 1077 1077 1115IXW3630GBT 859 919 919 956IXW3630GBTH (HPL) 1055 1114 1114 1152IXW3630GBTV (Veneer) 1055 1114 1114 1152Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.
IE1650 36 High Straight Wall With 18 HighTambour Garage
18
36
S 18 high garage is standard, specify17 high at no up charge
S Garage is made part of wall unit
S Garage clearance: 16 h
S Orders with wood doors will receivetraditional wood tambour
S Garage must be screwed tocountertop for proper operation
S Code reflects entire unit construction,both ends finished included
Single Door M N O P
IXW1836GBT $ 675 $ 705 $ 705 $ 723IXW1836GBTH (HPL) 856 886 886 905IXW1836GBTV (Veneer) 856 886 886 905
Double Doors
IXW2436GBT 748 808 808 846IXW2436GBTH (HPL) 930 990 990 1028IXW2436GBTV (Veneer) 930 990 990 1028IXW3036GBT 868 928 928 966IXW3036GBTH (HPL) 1063 1123 1123 1160IXW3036GBTV (Veneer) 1063 1123 1123 1160IXW3636GBT 924 984 984 1023IXW3636GBTH (HPL) 1120 1180 1180 1217IXW3636GBTV (Veneer) 1120 1180 1180 1217Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
15March 1, 2007
WALL CABINETSIE1655 39 High Straight Wall With 18 High
Tambour Garage
S 18 high garage is standard, specify17 high at no up charge
S Garage is made part of wall unit
S Garage clearance: 16 h
S Orders with wood doors will receivetraditional wood tambour
S Garage must be screwed tocountertop for proper operation
S Code reflects entire unit construction,both ends finished included
18
39
Single Door M N O P
IXW1839GBT $ 694 $ 725 $ 725 $ 743IXW1839GBTH (HPL) 876 906 906 924IXW1839GBTV (Veneer) 876 906 906 924
Double Doors
IXW2439GBT 775 835 835 873IXW2439GBTH (HPL) 956 1016 1016 1055IXW2439GBTV (Veneer) 956 1016 1016 1055IXW3039GBT 889 949 949 986IXW3039GBTH (HPL) 1085 1144 1144 1182IXW3039GBTV (Veneer) 1085 1144 1144 1182IXW3639GBT 889 949 949 986IXW3639GBTH (HPL) 1085 1144 1144 1182IXW3639GBTV (Veneer) 1085 1144 1144 1182Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1660 42 High Straight Wall With 18 HighTambour Garage
S 18 high garage is standard, specify17 high at no up charge
S Garage is made part of wall unit
S Garage clearance: 16 h
S Orders with wood doors will receivetraditional wood tambour
S Garage must be screwed tocountertop for proper operation
S Code reflects entire unit construction,both ends finished included
18
42
Single Door M N O P
IXW1842GBT $ 694 $ 725 $ 725 $ 743IXW1842GBTH (HPL) 876 906 906 924IXW1842GBTV (Veneer) 876 906 906 924
Double Doors
IXW2442GBT 775 835 835 873IXW2442GBTH (HPL) 956 1016 1016 1055IXW2442GBTV (Veneer) 956 1016 1016 1055IXW3042GBT 889 949 949 986IXW3042GBTH (HPL) 1085 1144 1144 1182IXW3042GBTV (Veneer) 1085 1144 1144 1182IXW3642GBT 889 949 949 986IXW3642GBTH (HPL) 1085 1144 1144 1182IXW3642GBTV (Veneer) 1085 1144 1144 1182Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1661 30 High Straight Wall With 18 HighThree Drawer Garage
18
48
S 18 high garage is standard,specify 17 high at no up charge
S Three equal height drawer fronts
S Both ends finished included
Single Door M N O P
IXW1530GARD3 $ 1019 $ 1049 $ 1117 $ 1125
IXW1530GARD3H (HPL) 1085 1114 1181 1189
IXW1530GARD3V (Veneer) 1139 1169 1235 1244
IXW1830GARD3 1043 1073 1140 1149
IXW1830GARD3H (HPL) 1107 1137 1204 1213
IXW1830GARD3V (Veneer) 1161 1191 1259 1267
IXW2130GARD3 1063 1093 1159 1169
IXW2130GARD3H (HPL) 1127 1157 1223 1233
IXW2130GARD3V (Veneer) 1182 1212 1278 1287
Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.
IE1662 36 High Straight Wall With 18 HighThree Drawer Garage
18
54
S 18 high garage is standard,specify 17 high at no up charge
S Three equal height drawer fronts
S Both ends finished included
Single Door M N O P
IXW1536GARD3 $ 1049 $ 1080 $ 1146 $ 1155
IXW1536GARD3H (HPL) 1114 1144 1211 1219
IXW1536GARD3V (Veneer) 1169 1199 1265 1274
IXW1836GARD3 1073 1103 1170 1178
IXW1836GARD3H (HPL) 1137 1167 1234 1243
IXW1836GARD3V (Veneer) 1191 1221 1288 1297
IXW2136GARD3 1090 1120 1186 1195
IXW2136GARD3H (HPL) 1154 1184 1250 1260
IXW2136GARD3V (Veneer) 1208 1238 1304 1313
Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
16 March 1, 2007
WALL CABINETSIE1663 39 High Straight Wall With 18 High
Three Drawer Garage
18
57
S 18 high garage is standard,specify 17 high at no up charge
S Three equal height drawer fronts
S Both ends finished included
Single Door M N O P
IXW1539GARD3 $ 1066 $ 1096 $ 1163 $ 1172
IXW1539GARD3H (HPL) 1130 1160 1228 1236
IXW1539GARD3V (Veneer) 1185 1215 1281 1291
IXW1839GARD3 1093 1123 1189 1199
IXW1839GARD3H (HPL) 1157 1187 1253 1263
IXW1839GARD3V (Veneer) 1212 1241 1308 1317
IXW2139GARD3 1120 1150 1216 1224
IXW2139GARD3H (HPL) 1184 1214 1280 1289
IXW2139GARD3V (Veneer) 1238 1268 1334 1343
Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1664 42 High Straight Wall With 18 HighThree Drawer Garage
18
60
S 18 high garage is standard,specify 17 high at no up charge
S Three equal height drawer fronts
S Both ends finished included
Single Door M N O P
IXW1542GARD3 $ 1066 $ 1096 $ 1163 $ 1172
IXW1542GARD3H (HPL) 1130 1160 1228 1236
IXW1542GARD3V (Veneer) 1185 1215 1281 1291
IXW1842GARD3 1093 1123 1189 1199
IXW1842GARD3H (HPL) 1157 1187 1253 1263
IXW1842GARD3V (Veneer) 1212 1241 1308 1317
IXW2142GARD3 1120 1150 1216 1224
IXW2142GARD3H (HPL) 1184 1214 1280 1289
IXW2142GARD3V (Veneer) 1238 1268 1334 1343
Finished End (must specify) N/C N/C N/C N/C
Three adjustable shelves.
IE1670 36 High Microwave
Double Doors M N O P
IXMCB2436 $ 454 $ 513 $ 513 $ 552
IXMCB2436H (HPL) 649 709 709 746
IXMCB2436V (Veneer) 669 729 729 766
IXMCB2736 454 513 513 552
IXMCB2736H (HPL) 649 709 709 746
IXMCB2736V (Veneer) 669 729 729 766
IXMCB3036 461 521 521 558
IXMCB3036H (HPL) 654 714 714 752
IXMCB3036V (Veneer) 676 735 735 773
Finished End (must specify) N/C N/C N/C N/C
Micro shelf is 18 deep.Micro opening is 17 1/4 tall.Code reflects entire unit construction.
IE1690 48 High Microwave
Double Doors M N O P
IXMCB2448 $ 520 $ 580 $ 580 $ 617
IXMCB2448H (HPL) 714 774 774 811
IXMCB2448V (Veneer) 738 797 797 835
IXMCB2748 520 580 580 617
IXMCB2748H (HPL) 714 774 774 811
IXMCB2748V (Veneer) 738 797 797 835
IXMCB3048 525 585 585 622
IXMCB3048H (HPL) 718 778 778 817
IXMCB3048V (Veneer) 743 803 803 840
Finished End (must specify) N/C N/C N/C N/C
Micro shelf is 18 deep.Micro opening is 17 1/4 tall.Code reflects entire unit construction.
17March 1, 2007
WALL CABINETSIE1700 18 High Cabinet With 12 High
Open Shelf Below
12
18
Double Doors M N O P
IXW3018PHS $ 542 $ 602 $ 602 $ 640
IXW3018PHSH (HPL) 650 710 710 747
IXW3018PHSV (Veneer) 650 710 710 747
IXW3618PHS 573 633 633 671
IXW3618PHSH (HPL) 681 741 741 778
IXW3618PHSV (Veneer) 681 741 741 778
Finished End (must specify) N/C N/C N/C N/C
30 overall height.Doors on top section.12 open shelf, 11 1/4 opening.Code reflects entire unit construction.
IE1710 24 High Cabinet With 12 HighOpen Shelf Below
12
24
Double Doors M N O P
IXW3024PHS $ 560 $ 620 $ 620 $ 658
IXW3024PHSH (HPL) 668 728 728 765
IXW3024PHSV (Veneer) 668 728 728 765
IXW3624PHS 585 645 645 682
IXW3624PHSH (HPL) 692 752 752 790
IXW3624PHSV (Veneer) 692 752 752 790
Finished End (must specify) N/C N/C N/C N/C
One adjustable shelf.36 overall height.Doors on top section.12 open shelf, 11 1/4 opening.Code reflects entire unit construction.
IE1715 27 High Cabinet With 12 HighOpen Shelf Below
12
27
Double Doors M N O P
IXW3027PHS $ 571 $ 631 $ 631 $ 669
IXW3027PHSH (HPL) 679 739 739 776
IXW3027PHSV (Veneer) 679 739 739 776
IXW3627PHS 608 668 668 706
IXW3627PHSH (HPL) 715 775 775 812
IXW3627PHSV (Veneer) 715 775 775 812
Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.39 overall height.Doors on top section.12 open shelf, 11 1/4 opening.Code reflects entire unit construction.
IE1720 30 High Cabinet With 12 HighOpen Shelf Below
12
30
Double Doors M N O P
IXW3030PHS $ 571 $ 631 $ 631 $ 669
IXW3030PHSH (HPL) 679 739 739 776
IXW3030PHSV (Veneer) 679 739 739 776
IXW3630PHS 608 668 668 706
IXW3630PHSH (HPL) 715 775 775 812
IXW3630PHSV (Veneer) 715 775 775 812
Finished End (must specify) N/C N/C N/C N/C
Two adjustable shelves.42 overall height.Doors on top section.12 open shelf, 11 1/4 opening.Code reflects entire unit construction.
18 March 1, 2007
WALL CABINETSIE1760 Wall Angled End Cabinet
135_
67 1/2_
90_
Double Doors M N O P
IXWAE30 $ 413 $ 473 $ 473 $ 510
Finished End (HPL) 32 32 32 32
Finished End (Veneer) 63 63 63 63
IXWAE36 447 507 507 544
Finished End (HPL) 39 39 39 39
Finished End (Veneer) 74 74 74 74
IXWAE39 454 513 513 552
Finished End (HPL) 44 44 44 44
Finished End (Veneer) 85 85 85 85
IXWAE42 454 513 513 552
Finished End (HPL) 44 44 44 44
Finished End (Veneer) 85 85 85 85
30 high cabinet has two fixed shelves.36 , 39 and 42 high cabinets have three fixed shelves.Recommend adjacent cabinet have finished ends.
IE1765 Angled Wall Cabinet
12
1211 1/4
11 1/4
Single Door M N O PIXAW30 $ 329 $ 359 $ 359 $ 378Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63IXAW36 360 390 390 409Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74IXAW39 367 397 397 416Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85IXAW42 367 397 397 416Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
30 high cabinet has two fixed shelves.36 , 39 and 42 high cabinets have three fixed shelves.Recommend adjacent cabinet have finished ends.Built with hinge stile, accent strip sent applied.
IE1766 Wall Angle Corner Shelf(Straight and Diagonal)
12 12 12 12
12
12
3
12
3
12
WAC WACD
Straight M N O PIWAC30 $ 366 $ 366 $ 366 $ 366IWAC30H (HPL) 461 461 461 461IWAC30V (Veneer) 480 480 480 480IWAC36 412 412 412 412IWAC36H (HPL) 598 598 598 598IWAC36V (Veneer) 623 623 623 623IWAC39 512 512 512 512IWAC39H (HPL) 637 637 637 637IWAC39V (Veneer) 666 666 666 666IWAC42 512 512 512 512IWAC42H (HPL) 637 637 637 637IWAC42V (Veneer) 666 666 666 666
DiagonalIWACD30 366 366 366 366IWACD30H (HPL) 461 461 461 461IWACD30V (Veneer) 480 480 480 480IWACD36 412 412 412 412IWACD36H (HPL) 598 598 598 598IWACD36V (Veneer) 623 623 623 623IWACD39 512 512 512 512IWACD39H (HPL) 637 637 637 637IWACD39V (Veneer) 666 666 666 666IWACD42 512 512 512 512IWACD42H (HPL) 637 637 637 637IWACD42V (Veneer) 666 666 666 666
Finished End (must specify) N/C N/C N/C N/C
Code reflects entire unit construction.30 high cabinet has two fixed shelves.36 , 39 and 42 high cabinets have three fixed shelves.
19March 1, 2007
WALL CABINETSIE1768 Inside Radius Wall - No Door
M N O PIIRW2430 $ 745 $ 745 $ 745 $ 745IIRW2430H (HPL) 932 932 932 932IIRW2430V (Veneer) 964 964 964 964IIRW2436 803 803 803 803IIRW2436H (HPL) 1006 1006 1006 1006IIRW2436V (Veneer) 1040 1040 1040 1040IIRW2439 963 963 963 963IIRW2439H (HPL) 1202 1202 1202 1202IIRW2439V (Veneer) 1244 1244 1244 1244IIRW2442 963 963 963 963IIRW2442H (HPL) 1202 1202 1202 1202IIRW2442V (Veneer) 1244 1244 1244 1244
Finished End (must specify) N/C N/C N/C N/C
Code reflects entire unit construction.30 high cabinet has two fixed shelves.36 , 39 and 42 high cabinets have three fixed shelves.
IE1769 Outside Radius Wall - No Door
M N O PIORW1230 $ 366 $ 366 $ 366 $ 366IORW1230H (HPL) 461 461 461 461IORW1230V (Veneer) 476 476 476 476IORW1236 412 412 412 412IORW1236H (HPL) 598 598 598 598IORW1236V (Veneer) 617 617 617 617IORW1239 512 512 512 512IORW1239H (HPL) 637 637 637 637IORW1239V (Veneer) 659 659 659 659IORW1242 512 512 512 512IORW1242H (HPL) 637 637 637 637IORW1242V (Veneer) 659 659 659 659
Finished End (must specify) N/C N/C N/C N/C
Code reflects entire unit construction.30 high cabinet has two fixed shelves.36 , 39 and 42 high cabinets have three fixed shelves.
IE1770 Wall Cabinet With PantrySpice Rack On Door
Single Door M N O PIXW1530PSR $ 381 $ 411 $ 411 $ 430IXW1830PSR 405 434 434 453IXW2130PSR 424 454 454 473Finished End (HPL) 32 32 32 32Finished End (Veneer) 63 63 63 63IXW1536PSR 426 456 456 475IXW1836PSR 449 479 479 499IXW2136PSR 466 496 496 515Finished End (HPL) 39 39 39 39Finished End (Veneer) 74 74 74 74IXW1539PSR 453 483 483 502IXW1839PSR 479 509 509 528IXW2139PSR 506 536 536 555Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85IXW1542PSR 453 483 483 502IXW1842PSR 479 509 509 528IXW2142PSR 506 536 536 555Finished End (HPL) 44 44 44 44Finished End (Veneer) 85 85 85 85
Wood spice rack 4 3/16 deep (with adjustable shelves)attached to the door.
IE1780 Wine Glass Holder
Shipped Loose M N O PIXGLRACK (0 - 24 ) $ 259 $ 259 $ 259 $ 259IXGLRACK2 (>24 - 42 ) 387 387 387 387
12 deep piece.Code reflects width of cabinet the glass holder fits under.Solid wood construction; oak, maple or cherry.
20 March 1, 2007
WALL CABINETSIE1790 Wine Rack Shelf
Shipped Loose M N O PIXWRS (0 - 24 ) $ 146 $ 146 $ 146 $ 146IXWRS2 (>24 - 36 ) 218 218 218 218IXWRS3 (>36 - 48 ) 291 291 291 291
10 13/16 deep piece.Code reflects width of cabinet the wine rack fits into.
IE1800 Wall Fillers
Fillers M N O PIWF3L (Laminate) $ 106 $ 106 $ 106 $ 106IWF3V (Veneer) 135 135 135 135IWF3H (HPL) 129 129 129 129IWF6L (Laminate) 113 113 113 113IWF6V (Veneer) 147 147 147 147IWF6H (HPL) 141 141 141 141
Fillers With One Finished End PanelIWFF3 (Laminate) 153 153 153 153IWFF3V (Veneer) 159 159 159 159IWFF3H (HPL) 153 153 153 153IWFF6 (Laminate) 163 163 163 163IWFF6V (Veneer) 169 169 169 169IWFF6H (HPL) 163 163 163 163
Fillers With Two Finished End PanelsIWFF3D (Laminate) 178 178 178 178IWFF3DV (Veneer) 185 185 185 185IWFF3DH (HPL) 178 178 178 178IWFF6D (Laminate) 184 184 184 184IWFF6DV (Veneer) 192 192 192 192IWFF6DH (HPL) 184 184 184 184
Must specify height and depth.Must specify for finished left or right.
IE1805 3 Wall Fillers -- Veneer WithHalf Spool & Rod Post Attached
S Shipped assembled
S Must specify height
S Standard at 12 deep
S Specify end panel attached left orright (attached right shown)
S 3 Half Spool & Rod Post attachedflush with edges of filler, 8 high topand bottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
3 wide
Specify
1 1/2
3 Fillers M N O PWF3VSR (Veneer) $ 399 $ 399 $ 399 $ 399WF3VSRR (Veneer) 399 399 399 399
3 Fillers With One Finished End PanelWFF3VSR (Veneer) 424 424 424 424WFF3VSRR (Veneer) 424 424 424 424
3 Fillers With Two Finished End PanelsWFF3DVSR (Veneer) 449 449 449 449WFF3DVSRR (Veneer) 449 449 449 449
IE1810 Wall Accent Strips
Accent Strip M N O PIAS3GE (Geneva Laminate) $ 17 $ 17 $ 17 $ 17IAS3 (Wood) 89 89 89 89IAS3H (HPL) 89 89 89 89IAS3F (Textured Foil) 92 92 92 92IAS6GE (Geneva Laminate) 28 28 28 28IAS6 (Wood) 111 111 111 111IAS6H (HPL) 111 111 111 111IAS6F (Textured Foil) 114 114 114 114
Must specify height.Shaped one long and two short, specify for shaped four edges.Banded accent strips are banded all four sides.
21March 1, 2007
BASE CABINETSIE2000 Standard Base
Single Door, Single Drawer M N O PIXB10 $ 383 $ 413 $ 436 $ 450IXB12 383 413 436 450IXB15 408 438 460 475IXB18 434 464 486 502IXB21 469 499 521 536
Double Doors, Single DrawerIXB24 532 591 614 648IXB27 582 642 685 716IXB30SFD 656 716 760 791IXB33SFD 662 722 767 798IXB36SFD 691 751 796 827
Double Doors, Double DrawersIXB30 726 786 829 860IXB33 732 792 836 867IXB36 761 821 865 896IXB39 779 839 884 915
Double Doors, Double Drawers With Vertical DividerIXB42 814 874 918 949Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
One adjustable shelf.
IE2010 Full Height Base
Single Door M N O PIXBFH10 $ 260 $ 290 $ 290 $ 309IXBFH12 260 290 290 309IXBFH15 285 315 315 333IXBFH18 312 342 342 360IXBFH21 346 376 376 394
Double DoorsIXBFH24 409 469 469 506IXBFH27 445 505 505 542IXBFH30 479 539 539 576IXBFH33 486 546 546 584IXBFH36 516 575 575 614IXBFH39 534 594 594 631
Double Doors With Vertical DividerIXBFH42 569 629 629 667Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
Two adjustable shelves.
IE2020 Standard Base With Rollouts
Single Door, Single Drawer M N O PIXB15RO $ 748 $ 778 $ 801 $ 817
IXB18RO 775 805 827 842
IXB21RO 809 839 861 877
Double Doors, Single DrawerIXB24RO 873 933 954 989
IXB27RO 922 982 1027 1058
IXB30SFDRO 997 1057 1101 1132
IXB33SFDRO 1004 1064 1107 1139
IXB36SFDRO 1033 1092 1136 1167
Double Doors, Double DrawersIXB30RO 1066 1126 1171 1202
IXB33RO 1073 1133 1177 1208
IXB36RO 1102 1161 1206 1237
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two rollouts installed.
IE2030 12 Deep Full Height Base Wall
Single Door M N O PIXBFHW10 $ 260 $ 290 $ 290 $ 309
IXBFHW12 260 290 290 309
IXBFHW15 285 315 315 333
IXBFHW18 312 342 342 360
IXBFHW21 346 376 376 394
Double DoorsIXBFHW24 409 469 469 506
IXBFHW27 445 505 505 542
IXBFHW30 479 539 539 576
IXBFHW33 486 546 546 584
IXBFHW36 516 575 575 614
IXBFHW39 534 594 594 631
Double Doors With Vertical DividerIXBFHW42 569 629 629 667
Finished End (HPL) 32 32 32 32
Finished End (Veneer) 63 63 63 63
Two adjustable shelves.
23March 1, 2007
BASE CABINETSIE2040 Standard Base With Breadboard
Single Door, Single Drawer M N O PIXB18BB $ 582 $ 612 $ 633 $ 649
IXB21BB 616 646 668 683
Double Doors, Single DrawerIXB24BB 679 739 761 795
IXB27BB 790 850 893 924
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
One adjustable shelf.Breadboard is behind drawer front.
IE2050 Standard Base With Rolloutsand Breadboard
Single Door, Single Drawer M N O PIXB18ROBB $ 922 $ 952 $ 975 $ 990
IXB21ROBB 956 986 1009 1025
Double Doors, Single DrawerIXB24ROBB 1019 1080 1102 1136
IXB27ROBB 1130 1190 1235 1266
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two fixed rollouts.Breadboard is behind drawer front.
IE2060 Standard Base With Wastebasket
Single Door, Single Drawer,Single Waste, Not Attached* M N O PIXB15WASTE $ 884 $ 914 $ 936 $ 951
IXB18WASTE 910 940 963 978
Single Door, Single Drawer, Single Waste, AttachedIXB15WASTEA 993 1023 1044 1060
IXB18WASTEA 1018 1048 1071 1087
Single Door, Single Drawer, Double Waste, Not Attached*IXB18WASTED 941 971 994 1009
IXB21WASTED 976 1006 1028 1043
Single Door, Single Drawer, Double Waste, AttachedIXB18WASTEDA 1049 1080 1102 1118
IXB21WASTEDA 1085 1115 1136 1152
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
* Not attached to door wastebasket pulls out separately.
IE2070 Standard Base With Wastebasketand Breadboard
Single Door, Single Drawer,Single Waste, Not Attached* M N O PIXB15WASTEBB $ 1015 $ 1045 $ 1068 $ 1084
IXB18WASTEBB 1042 1072 1094 1110
Single Door, Single Drawer, Single Waste, AttachedIXB15WASTEABB 1120 1150 1172 1187
IXB18WASTEABB 1478 1508 1531 1546
Single Door, Single Drawer, Double Waste, Not Attached*IXB18WASTEDBB 1066 1095 1118 1133
IXB21WASTEDBB 1099 1130 1152 1167
Single Door, Single Drawer, Double Waste, AttachedIXB18WASTEDABB 1170 1200 1221 1237
IXB21WASTEDABB 1204 1234 1255 1271
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
* Not attached to door wastebasket pulls out separately.Breadboard is behind drawer front.
24 March 1, 2007
BASE CABINETSIE2080 Three Drawer Base
Full Width Single Drawers M N O PIXBDT12 $ 769 $ 769 $ 835 $ 825
IXBDT15 780 780 848 837
IXBDT18 787 787 853 842
IXBDT21 820 820 886 876
IXBDT24 839 839 906 896
IXBDT27 858 858 924 915
IXBDT30 899 899 966 955
IXBDT33 926 926 993 982
IXBDT36 954 954 1022 1011
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
IE2085 Three Drawer Base With Breadboard
Full Width Single Drawers M N O PIXBDT12BB $ 916 $ 916 $ 982 $ 972
IXBDT15BB 928 928 995 984
IXBDT18BB 934 934 1000 990
IXBDT21BB 967 967 1033 1024
IXBDT24BB 986 986 1054 1043
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Breadboard is behind drawer front.
IE2090 Four Drawer Base
Full Width Single Drawers M N O PIXBD12 $ 923 $ 923 $ 1012 $ 999
IXBD15 945 945 1033 1019
IXBD18 947 947 1035 1023
IXBD21 982 982 1071 1058
IXBD24 1000 1000 1089 1075
IXBD27 1018 1018 1107 1094
IXBD30 1063 1063 1152 1139
IXBD33 1089 1089 1177 1164
IXBD36 1115 1115 1204 1190
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
IE2100 Four Drawer Base With Breadboard
Full Width Single Drawers M N O PIXBD12BB $ 1071 $ 1071 $ 1159 $ 1146
IXBD15BB 1092 1092 1181 1167
IXBD18BB 1094 1094 1183 1170
IXBD21BB 1129 1129 1218 1205
IXBD24BB 1148 1148 1236 1222
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Breadboard is behind drawer front.
25March 1, 2007
BASE CABINETSIE2105 Five Drawer Base
Full Width Single Drawers M N O PIXBDX12 $ 1088 $ 1088 $ 1199 $ 1182
IXBDX15 1108 1108 1219 1203
IXBDX18 1112 1112 1222 1206
IXBDX21 1146 1146 1256 1240
IXBDX24 1165 1165 1276 1260
IXBDX27 1183 1183 1294 1277
IXBDX30 1228 1228 1338 1322
IXBDX33 1252 1252 1363 1347
IXBDX36 1280 1280 1391 1374
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Five equal drawers.
IE2106 Base Angled End Cabinet
2423 11/16 67 1/2_
135_
Double Doors M N O PIXBA24 $ 536 $ 596 $ 596 $ 633
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two fixed shelves.Recommend adjacent cabinets have finished ends.
IE2107 Angled Base Cabinet
2423 1/4
23 1/4
Double Doors M N O PIXAB24 $ 536 $ 596 $ 596 $ 633
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two adjustable shelves.Recommend adjacent cabinets have finished ends.Shipped with accent strips attached.
IE2110 Blind Corner Base
S BCB36 N/A with 3stile & rail doors orRiverside
Single Door, Single Drawer,With 6 Accent Strip M N O PIXBCB36 $ 653 $ 683 $ 706 $ 721
IXBCB39 671 701 723 739
IXBCB42 703 733 756 771
IXBCB45 745 775 797 812
IXBCB48 768 797 820 835
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
One adjustable shelf.Must specify blind left or right on order form. Blind left is shown.Can be pulled 3 , 6 accent strip shipped loose.
IE2120 Peninsula Corner Base
Double Doors, Single Drawer M N O PIXPCB27* $ 816 $ 875 $ 897 $ 932
Four DrawerIXPCBD27 1266 1266 1355 1341
Three DrawerIXPCBDT27 1106 1106 1173 1163
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
* One adjustable shelf in IXPCB27.Includes flush finished back. Notched for toe front and back.4 accent strip shipped loose.Can fir out 3/4 for 24 3/4 depth. Please specify, no charge.
26 March 1, 2007
BASE CABINETSIE2140 Square Corner Base
Blum Bi-Fold Doors M N O PIXSCB36 $ 630 $ 690 $ 690 $ 728
Doors Hinged SeparatelyIXSCB39 701 761 761 798
IXSCB42 752 811 811 850
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
IE2150 Square Corner Base With Super Susans
Blum Bi-Fold Doors M N O PIXSCB36SS $ 1260 $ 1319 $ 1319 $ 1357
Doors Hinged SeparatelyIXSCB39SS 1330 1390 1390 1427
IXSCB42SS 1381 1441 1441 1478
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two super susans.
IE2160 Diagonal Base Corner
Door
TopSide
Single Drawer, Single Door M N O PIXDBC36 $ 779 $ 809 $ 832 $ 848
IXDBC39 852 882 904 919
Single Drawer, Double DoorsIXDBC42 920 980 1002 1037
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
One fixed shelf.Door is set back to create flush fronts; if no cabinet on side, you will beable to see into cabinet.
IE2170 Full Height Diagonal Base Corner
Door
TopSide
Single Door M N O PIXDBCFH36 $ 657 $ 686 $ 686 $ 706
IXDBCFH39 729 759 759 777
Double DoorsIXDBCFH42 797 857 857 895
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
One fixed shelf.Door is set back to create flush fronts; if no cabinet on side, you will beable to see into cabinet.
IE2180 Diagonal Base CornerWith Super Susans
Door
TopSide
Single Drawer, Single Door M N O PIXDBC36SS $ 1409 $ 1439 $ 1460 $ 1476
IXDBC39SS 1481 1510 1533 1548
Single Drawer, Double DoorsIXDBC42SS 1549 1609 1631 1665
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two super susans.Door is set back to create flush fronts; if no cabinet on side, you will beable to see into cabinet.
IE2190 Full Height Diagonal Base CornerWith Super Susans
Door
TopSide
Single Door M N O PIXDBCFH36SS $ 1285 $ 1315 $ 1315 $ 1334
IXDBCFH39SS 1358 1388 1388 1407
Double DoorsIXDBCFH42SS 1426 1486 1486 1524
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Two super susans.Door is set back to create flush fronts; if no cabinet on side, you will beable to see into cabinet.
27March 1, 2007
BASE CABINETSIE2205 Half/Quarter Round Shelves
BOSBHR
24
24 12
30
Half Round M N O PIBHR $ 472 $ 472 $ 472 $ 472IBHRH (HPL) 588 588 588 588IBHRV (Veneer) 610 610 610 610
Open ShelfIBOS 472 472 472 472IBOSH (HPL) 588 588 588 588IBOSV (Veneer) 610 610 610 610Code reflects complete interior and exterior top and bottom.Finished ends no charge, must specify.BOS: specify curve left or curve right.
IE2210 Base Angle Corner Shelf
24 24
2424
30
6
6
BACS BACSD
30
Straight M N O PIBACS24 $ 585 $ 585 $ 585 $ 585IBACS24H (HPL) 731 731 731 731IBACS24V (Veneer) 764 764 764 764
DiagonalIBACSD24 585 585 585 585IBACSD24H (HPL) 731 731 731 731IBACSD24V (Veneer) 764 764 764 764Code reflects complete interior and exterior top and bottom.Finished ends no charge, must specify.
IE2220 Base Transition
Single Door M N O PIXBTC12 $ 394 $ 424 $ 424 $ 443
Two adjustable shelves.
Single Door, Single Door, Single DrawerIXBTC24 775 835 857 891IXBTC30 828 888 911 945
Double Door, Single Door, Single DrawerIXBTC36 924 1014 1037 1090Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
43_ angle.Door is set back to create flush fronts; if no cabinets on short side, youwill be able to see into cabinet.
IE2230 16 High Range Front
Front Only M N O PIXRF30 $ 113 $ 113 $ 113 $ 113
IXRF30H (HPL) 136 136 136 136
IXRF30V (Veneer) 141 141 141 141
IXRF36 136 136 136 136
IXRF36H (HPL) 160 160 160 160
IXRF36V (Veneer) 167 167 167 167
IE2240 Sink Base
Single Drawer Front,Double Doors M N O PIXSB24 $ 409 $ 469 $ 491 $ 525
IXSB27 445 505 527 561
IXSB30 464 524 546 581
IXSB32 471 531 553 587
IXSB33 474 534 556 590
IXSB36 484 543 566 600
IXSB39 508 568 590 624
IXSB42 534 594 616 650
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
IE2250 Sink Base With Clipped Corners
Accent Strip
Accent Strip Support
Cabinet End
Hinge Stile 53.13_
Single Drawer Front,Double Doors M N O PIXSBCC36 $ 710 $ 770 $ 792 $ 826
IXSBCC39 734 794 817 851
IXSBCC42 760 820 841 876
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
For tilt outs add $66.
28 March 1, 2007
BASE CABINETSIE2270 Sink Front
Single Drawer Front,Double Doors M N O PIXSF30 $ 302 $ 362 $ 384 $ 418
IXSF33 323 383 406 440
IXSF36 348 408 430 464
IXSF42 374 433 455 490
For tilt outs add $66.
IE2280 Square Corner Sink Base
Blum Bi-Fold Doors M N O PIXSCS36 $ 573 $ 633 $ 633 $ 671
Doors Hinged SeparatelyIXSCS39 601 661 661 699
IXSCS42 629 689 689 727
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
IE2300 Diagonal Corner Sink Base
Single Drawer Front,Single Door M N O PIXDSB36 $ 552 $ 582 $ 603 $ 619
IXDSB39 603 633 655 671
Single Drawer Front, Double DoorsIXDSB42 672 732 755 789
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
For tilt outs add $66.
IE2310 Diagonal Corner Sink Front
Single Drawer Front,Single Door M N O PIXDSF36 $ 290 $ 320 $ 342 $ 357
IXDSF39 329 359 381 396
Single Drawer Front, Double DoorsIXDSF42 377 437 459 493
For tilt outs add $66.
IE2320 Sink Base With Tilt Out
Single Drawer Front,Double Doors M N O PIXSB27TO $ 510 $ 570 $ 592 $ 627
IXSB30TO 529 589 612 646
IXSB32TO 536 596 618 652
IXSB33TO 539 599 621 655
IXSB36TO 550 610 631 666
IXSB39TO 573 633 655 690
IXSB42TO 599 659 681 715
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
IE2330 Standard Base With Tray Dividers
Single Drawer, SIngle Door,Wire Tray Divider M N O PIXB10TRAYW $ 444 $ 474 $ 496 $ 511
IXB12TRAYW 444 474 496 511
IXB15TRAYW 529 559 582 597
IXB18TRAYW 617 647 669 684
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
10 and 12 wide cabinets have one divider.15 wide cabinet has two dividers.18 wide cabinet has three dividers.Tray dividers are removable.
29March 1, 2007
BASE CABINETSIE2340 Base Spice Drawer - 12 Deep
M N O PIXBSD6 $ 939 $ 939 $ 939 $ 939
Dovetails on spice drawers are exposed.Cabinet is finished interior.Finished ends no charge; must specify.
IE2350 Base Fillers
Fillers M N O PIBF3L (Laminate) $ 66 $ 66 $ 66 $ 66
IBF3V (Veneer) 93 93 93 93
IBF3H (HPL) 90 90 90 90
IBF6L (Laminate) 74 74 74 74
IBF6V (Veneer) 106 106 106 106
IBF6H (HPL) 102 102 102 102
Fillers With One Finished End PanelIBFF3 (Laminate) 232 232 232 232
IBFF3V (Veneer) 242 242 242 242
IBFF3H (HPL) 232 232 232 232
IBFF6 (Laminate) 243 243 243 243
IBFF6V (Veneer) 253 253 253 253
IBFF6H (HPL) 243 243 243 243
Fillers With Two Finished End PanelsIBFF3D (Laminate) 376 376 376 376
IBFF3DV (Veneer) 391 391 391 391
IBFF3DH (HPL) 376 376 376 376
IBFF6D (Laminate) 383 383 383 383
IBFF6DV (Veneer) 398 398 398 398
IBFF6DH (HPL) 383 383 383 383
Must specify for finished left or right.
IE2355 3 Base Fillers -- Veneer WithHalf Spool & Rod Post Attached
S Flush toe standard
S Shipped assembled
S Standard at 24 deep
S Specify end panel attached left or right(attached right shown)
S 3 Half Spool & Rod Post attached flushwith edges of filler, 8 high top and bottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
3 wide
Specify
1 1/2
3 Fillers M N O PBF3VSR (Veneer) $ 357 $ 357 $ 357 $ 357
BF3VSRR (Veneer) 357 357 357 357
3 Fillers With One Finished End PanelBFF3VSR (Veneer) 506 506 506 506
BFF3VSRR (Veneer) 506 506 506 506
3 Fillers With Two Finished End PanelsBFF3DVSR (Veneer) 655 655 655 655
BFF3DVSRR (Veneer) 655 655 655 655
IE2360 Base Accent Strips
Accent Strip M N O PIAS3GE (Geneva Laminate) $ 17 $ 17 $ 17 $ 17
IAS3 (Wood) 92 92 92 92
IAS3H (HPL) 89 89 89 89
IAS3F (Textured Foil) 92 92 92 92
IAS6GE (Geneva Laminate) 28 28 28 28
IAS6 (Wood) 116 116 116 116
IAS6H (HPL) 111 111 111 111
IAS6F (Textured Foil) 114 114 114 114
Shaped one long and two short, specify for shaped four edges.Banded accent strips are banded all four sides.
30 March 1, 2007
BASE CABINETSIE2370 Base Angled End Panel
6
241 1/2
34 1/2
CabinetWidth
Wall Space
Laminate M N O PIBAEPL (Left) $ 394 $ 394 $ 394 $ 394
IBAEPR (Right) 394 394 394 394
Solid Wood on Plywood ReturnIBAEPLV (Left) 308 308 308 308
IBAEPRV (Right) 308 308 308 308
HPL on Particle Board ReturnIBAEPLH (Left) 394 394 394 394
IBAEPRH (Right) 394 394 394 394
IE2380 3/4 Base End Panel
34 1/2
M N O PIBEP24L (Laminate) $ 158 $ 158 $ 158 $ 158
IBEP24V (Veneer) 259 259 259 259
IBEP24H (HPL) 226 226 226 226
IE2390 Silverware Divider
Shipped Loose, Wood M N O PISILDV15 $ 89 $ 89 $ 89 $ 89
ISILDV18 89 89 89 89
ISILDV21 89 89 89 89
ISILDV24 89 89 89 89
Shipped Loose, Vinyl - AlmondIVSILDV15 89 89 89 89
IVSILDV18 89 89 89 89
IVSILDV21 89 89 89 89
IVSILDV24 89 89 89 89
Code reflects the cabinet the divider fits into.
IE2395 Slide Out Towel Bar
Shipped Loose M N O PTWLRACK2 (2 bars) $ 98 $ 98 $ 98 $ 98
Chrome finish.
31March 1, 2007
TALL CABINETSIE3000 84 High, 12 Deep Broom Cabinet
Single Door M N O P
IXBC151284 $ 513 $ 603 $ 603 $ 660
IXBC181284 552 642 642 698
IXBC211284 599 689 689 745
Double Doors
IXBC241284 746 926 926 1039
IXBC271284 817 996 996 1108
IXBC301284 886 1065 1065 1178
IXBC331284 955 1135 1135 1248
IXBC361284 1027 1206 1206 1319
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
No shelf in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3010 90 High, 12 Deep Broom Cabinet
Single Door M N O P
IXBC151290 $ 727 $ 817 $ 817 $ 873
IXBC181290 765 855 855 912
IXBC211290 812 903 903 959
Double Doors
IXBC241290 959 1139 1139 1251
IXBC271290 1029 1208 1208 1322
IXBC301290 1098 1278 1278 1391
IXBC331290 1169 1348 1348 1460
IXBC361290 1240 1420 1420 1533
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
One adjustable shelf in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3015 93 High, 12 Deep Broom Cabinet
Single Door M N O P
IXBC151293 $ 727 $ 817 $ 817 $ 873
IXBC181293 765 855 855 912
IXBC211293 812 903 903 959
Double Doors
IXBC241293 959 1139 1139 1251
IXBC271293 1029 1208 1208 1322
IXBC301293 1098 1278 1278 1391
IXBC331293 1169 1348 1348 1460
IXBC361293 1240 1420 1420 1533
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3020 96 High, 12 Deep Broom Cabinet
Single Door M N O P
IXBC151296 $ 727 $ 817 $ 817 $ 873
IXBC181296 765 855 855 912
IXBC211296 812 903 903 959
Double Doors
IXBC241296 959 1139 1139 1251
IXBC271296 1029 1208 1208 1322
IXBC301296 1098 1278 1278 1391
IXBC331296 1169 1348 1348 1460
IXBC361296 1240 1420 1420 1533
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
33March 1, 2007
TALL CABINETSIE3030 84 High, 12 Deep Broom Cabinet
With Adjustable Shelves
Single Door M N O P
IXBC151284ADJ $ 670 $ 760 $ 760 $ 817
IXBC181284ADJ 708 797 797 854
IXBC211284ADJ 756 845 845 901
Double Doors
IXBC241284ADJ 903 1082 1082 1195
IXBC271284ADJ 1003 1183 1183 1296
IXBC301284ADJ 1073 1252 1252 1365
IXBC331284ADJ 1143 1323 1323 1436
IXBC361284ADJ 1214 1393 1393 1506
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
No shelf in upper section. Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3040 90 High, 12 Deep Broom CabinetWith Adjustable Shelves
Single Door M N O P
IXBC151290ADJ $ 883 $ 972 $ 972 $ 1029
IXBC181290ADJ 921 1011 1011 1067
IXBC211290ADJ 969 1059 1059 1115
Double Doors
IXBC241290ADJ 1115 1295 1295 1408
IXBC271290ADJ 1216 1395 1395 1508
IXBC301290ADJ 1285 1466 1466 1578
IXBC331290ADJ 1356 1535 1535 1648
IXBC361290ADJ 1427 1607 1607 1720
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
One adjustable shelf in upper section.Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3045 93 High, 12 Deep Broom CabinetWith Adjustable Shelves
Single Door M N O P
IXBC151293ADJ $ 883 $ 972 $ 972 $ 1029
IXBC181293ADJ 921 1011 1011 1067
IXBC211293ADJ 969 1059 1059 1115
Double Doors
IXBC241293ADJ 1115 1295 1295 1408
IXBC271293ADJ 1216 1395 1395 1508
IXBC301293ADJ 1285 1466 1466 1578
IXBC331293ADJ 1356 1535 1535 1648
IXBC361293ADJ 1427 1607 1607 1720
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3050 96 High, 12 Deep Broom CabinetWith Adjustable Shelves
Single Door M N O P
IXBC151296ADJ $ 883 $ 972 $ 972 $ 1029
IXBC181296ADJ 921 1011 1011 1067
IXBC211296ADJ 969 1059 1059 1115
Double Doors
IXBC241296ADJ 1115 1295 1295 1408
IXBC271296ADJ 1216 1395 1395 1508
IXBC301296ADJ 1285 1466 1466 1578
IXBC331296ADJ 1356 1535 1535 1648
IXBC361296ADJ 1427 1607 1607 1720
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
34 March 1, 2007
TALL CABINETSIE3060 84 High, 24 Deep Broom Cabinet
Single Door M N O P
IXBC152484 $ 587 $ 677 $ 677 $ 733
IXBC182484 645 734 734 791
IXBC212484 694 785 785 840
Double Doors
IXBC242484 833 1012 1012 1125
IXBC272484 916 1095 1095 1208
IXBC302484 996 1175 1175 1288
IXBC332484 1085 1264 1264 1377
IXBC362484 1159 1339 1339 1452
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
No shelf in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3070 90 High, 24 Deep Broom Cabinet
Single Door M N O P
IXBC152490 $ 797 $ 887 $ 887 $ 944
IXBC182490 856 946 946 1002
IXBC212490 907 997 997 1054
Double Doors
IXBC242490 1045 1224 1224 1338
IXBC272490 1128 1308 1308 1421
IXBC302490 1209 1389 1389 1502
IXBC332490 1296 1475 1475 1588
IXBC362490 1373 1553 1553 1665
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
One adjustable shelf in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3075 93 High, 24 Deep Broom Cabinet
Single Door M N O P
IXBC152493 $ 797 $ 887 $ 887 $ 944
IXBC182493 856 946 946 1002
IXBC212493 907 997 997 1054
Double Doors
IXBC242493 1045 1224 1224 1338
IXBC272493 1128 1308 1308 1421
IXBC302493 1209 1389 1389 1502
IXBC332493 1296 1475 1475 1588
IXBC362493 1373 1553 1553 1665
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3080 96 High, 24 Deep Broom Cabinet
Single Door M N O P
IXBC152496 $ 797 $ 887 $ 887 $ 944
IXBC182496 856 946 946 1002
IXBC212496 907 997 997 1054
Double Doors
IXBC242496 1045 1224 1224 1338
IXBC272496 1128 1308 1308 1421
IXBC302496 1209 1389 1389 1502
IXBC332496 1296 1475 1475 1588
IXBC362496 1373 1553 1553 1665
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Large opening not drilled for shelves.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
35March 1, 2007
TALL CABINETSIE3090 84 High, 24 Deep Broom Cabinet
With Adjustable Shelves
Single Door M N O P
IXBC152484ADJ $ 797 $ 887 $ 887 $ 944
IXBC182484ADJ 855 945 945 1001
IXBC212484ADJ 905 995 995 1051
Double Doors
IXBC242484ADJ 1043 1222 1222 1335
IXBC272484ADJ 1186 1365 1365 1478
IXBC302484ADJ 1266 1445 1445 1558
IXBC332484ADJ 1355 1534 1534 1647
IXBC362484ADJ 1429 1609 1609 1722
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
No shelf in upper section. Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3100 90 High, 24 Deep Broom CabinetWith Adjustable Shelves
Single Door M N O P
IXBC152490ADJ $ 1008 $ 1097 $ 1097 $ 1154
IXBC182490ADJ 1066 1156 1156 1213
IXBC212490ADJ 1118 1207 1207 1264
Double Doors
IXBC242490ADJ 1255 1436 1436 1548
IXBC272490ADJ 1398 1578 1578 1691
IXBC302490ADJ 1480 1659 1659 1772
IXBC332490ADJ 1566 1745 1745 1858
IXBC362490ADJ 1644 1823 1823 1935
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
One adjustable shelf in upper section.Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3105 93 High, 24 Deep Broom CabinetWith Adjustable Shelves
Single Door M N O P
IXBC152493ADJ $ 1008 $ 1097 $ 1097 $ 1154
IXBC182493ADJ 1066 1156 1156 1213
IXBC212493ADJ 1118 1207 1207 1264
Double Doors
IXBC242493ADJ 1255 1436 1436 1548
IXBC272493ADJ 1398 1578 1578 1691
IXBC302493ADJ 1480 1659 1659 1772
IXBC332493ADJ 1566 1745 1745 1858
IXBC362493ADJ 1644 1823 1823 1935
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3110 96 High, 24 Deep Broom CabinetWith Adjustable Shelves
Single Door M N O P
IXBC152496ADJ $ 1008 $ 1097 $ 1097 $ 1154
IXBC182496ADJ 1066 1156 1156 1213
IXBC212496ADJ 1118 1207 1207 1264
Double Doors
IXBC242496ADJ 1255 1436 1436 1548
IXBC272496ADJ 1398 1578 1578 1691
IXBC302496ADJ 1480 1659 1659 1772
IXBC332496ADJ 1566 1745 1745 1858
IXBC362496ADJ 1644 1823 1823 1935
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Four adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
36 March 1, 2007
TALL CABINETSIE3120 84 High, 24 Deep
Broom Cabinet With Rollouts
Single Door M N O P
IXBC152484RO $ 1269 $ 1359 $ 1359 $ 1415
IXBC182484RO 1327 1417 1417 1473
IXBC212484RO 1377 1467 1467 1522
Double Doors
IXBC242484RO 1515 1694 1694 1807
IXBC272484RO 1598 1777 1777 1890
IXBC302484RO 1678 1857 1857 1971
IXBC332484RO 1767 1946 1946 2059
IXBC362484RO 1841 2021 2021 2134
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
No shelf in upper section. Four fixed rollouts in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3130 90 High, 24 DeepBroom Cabinet With Rollouts
Single Door M N O P
IXBC152490RO $ 1480 $ 1569 $ 1569 $ 1626
IXBC182490RO 1538 1628 1628 1684
IXBC212490RO 1589 1679 1679 1736
Double Doors
IXBC242490RO 1727 1908 1908 2020
IXBC272490RO 1810 1990 1990 2103
IXBC302490RO 1892 2071 2071 2184
IXBC332490RO 1978 2157 2157 2271
IXBC362490RO 2056 2235 2235 2347
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
One adjustable shelf in upper section.Four fixed rollouts in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3135 93 High, 24 DeepBroom Cabinet With Rollouts
Single Door M N O P
IXBC152493RO $ 1480 $ 1569 $ 1569 $ 1626
IXBC182493RO 1538 1628 1628 1684
IXBC212493RO 1589 1679 1679 1736
Double Doors
IXBC242493RO 1727 1908 1908 2020
IXBC272493RO 1810 1990 1990 2103
IXBC302493RO 1892 2071 2071 2184
IXBC332493RO 1978 2157 2157 2271
IXBC362493RO 2056 2235 2235 2347
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Four fixed rollouts in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3140 96 High, 24 DeepBroom Cabinet With Rollouts
Single Door M N O P
IXBC152496RO $ 1480 $ 1569 $ 1569 $ 1626
IXBC182496RO 1538 1628 1628 1684
IXBC212496RO 1589 1679 1679 1736
Double Doors
IXBC242496RO 1727 1908 1908 2020
IXBC272496RO 1810 1990 1990 2103
IXBC302496RO 1892 2071 2071 2184
IXBC332496RO 1978 2157 2157 2271
IXBC362496RO 2056 2235 2235 2347
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Two adjustable shelves in upper section.Four fixed rollouts in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
37March 1, 2007
TALL CABINETSIE3150 84 High, 24 Deep Broom Cabinet
Reverse With Adjustable Shelves
Single Door M N O P
IXBCR152484ADJ $ 797 $ 887 $ 887 $ 944
IXBCR182484ADJ 855 945 945 1001
IXBCR212484ADJ 905 995 995 1051
Double Doors
IXBCR242484ADJ 1043 1222 1222 1335
IXBCR272484ADJ 1186 1365 1365 1478
IXBCR302484ADJ 1266 1445 1445 1558
IXBCR332484ADJ 1355 1534 1534 1647
IXBCR362484ADJ 1429 1609 1609 1722
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Four adjustable shelves in upper section.Two adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3160 90 High, 24 Deep Broom CabinetReverse With Adjustable Shelves
Single Door M N O P
IXBCR152490ADJ $ 1008 $ 1097 $ 1097 $ 1154
IXBCR182490ADJ 1066 1156 1156 1213
IXBCR212490ADJ 1118 1207 1207 1264
Double Doors
IXBCR242490ADJ 1255 1436 1436 1548
IXBCR272490ADJ 1398 1578 1578 1691
IXBCR302490ADJ 1480 1659 1659 1772
IXBCR332490ADJ 1566 1745 1745 1858
IXBCR362490ADJ 1644 1823 1823 1935
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Four adjustable shelves in upper section.Two adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3165 93 High, 24 Deep Broom CabinetReverse With Adjustable Shelves
Single Door M N O P
IXBCR152493ADJ $ 1008 $ 1097 $ 1097 $ 1154
IXBCR182493ADJ 1066 1156 1156 1213
IXBCR212493ADJ 1118 1207 1207 1264
Double Doors
IXBCR242493ADJ 1255 1436 1436 1548
IXBCR272493ADJ 1398 1578 1578 1691
IXBCR302493ADJ 1480 1659 1659 1772
IXBCR332493ADJ 1566 1745 1745 1858
IXBCR362493ADJ 1644 1823 1823 1935
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Four adjustable shelves in upper section.Two adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE3170 96 High, 24 Deep Broom CabinetReverse With Adjustable Shelves
Single Door M N O P
IXBCR152496ADJ $ 1008 $ 1097 $ 1097 $ 1154
IXBCR182496ADJ 1066 1156 1156 1213
IXBCR212496ADJ 1118 1207 1207 1264
Double Doors
IXBCR242496ADJ 1255 1436 1436 1548
IXBCR272496ADJ 1398 1578 1578 1691
IXBCR302496ADJ 1480 1659 1659 1772
IXBCR332496ADJ 1566 1745 1745 1858
IXBCR362496ADJ 1644 1823 1823 1935
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Four adjustable shelves in upper section.Two adjustable shelves in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
38 March 1, 2007
TALL CABINETSIE3190 3/4 Refrigerator End Panels
12 Deep M N O P
IREP1284 $ 106 $ 106 $ 106 $ 106
IREP1284H (HPL) 161 161 161 161
IREP1284V (Veneer) 240 240 240 240
IREP1290 119 119 119 119
IREP1290H (HPL) 161 161 161 161
IREP1290V (Veneer) 240 240 240 240
IREP1296 119 119 119 119
IREP1296H (HPL) 161 161 161 161
IREP1296V (Veneer) 240 240 240 240
24 Deep
IREP2484 212 212 212 212
IREP2484H (HPL) 322 322 322 322
IREP2484V (Veneer) 478 478 478 478
IREP2490 239 239 239 239
IREP2490H (HPL) 322 322 322 322
IREP2490V (Veneer) 478 478 478 478
IREP2496 239 239 239 239
IREP2496H (HPL) 322 322 322 322
IREP2496V (Veneer) 478 478 478 478
30 Deep
IREP3084 324 324 324 324
IREP3084H (HPL) 434 434 434 434
IREP3084V (Veneer) 591 591 591 591
IREP3090 351 351 351 351
IREP3090H (HPL) 434 434 434 434
IREP3090V (Veneer) 591 591 591 591
IREP3096 351 351 351 351
IREP3096H (HPL) 434 434 434 434
IREP3096V (Veneer) 591 591 591 591
Ships loose for field installation. Does not include cabinet.For different depths, order larger size and specify depth.
IE3200 Tall Fillers
Fillers M N O P
ITF3L (Laminate) $ 109 $ 109 $ 109 $ 109
ITF3V (Veneer) 147 147 147 147
ITF3H (HPL) 141 141 141 141
ITF6L (Laminate) 121 121 121 121
ITF6V (Veneer) 158 158 158 158
ITF6H (HPL) 152 152 152 152
Fillers With One Finished End Panel
ITFF3 (Laminate) 601 601 601 601
ITFF3V (Veneer) 625 625 625 625
ITFF3H (HPL) 601 601 601 601
ITFF6 (Laminate) 611 611 611 611
ITFF6V (Veneer) 636 636 636 636
ITFF6H (HPL) 611 611 611 611
Must specify height.Must specify for finished left or right.
IE3205 3 Tall Fillers -- Veneer WithHalf Spool & Rod Post Attached
S Flush toe standard
S Shipped with top returnloose, front and verticalreturn assembled
S Standard at 12 or 24 deep
S Specify height with 4 1/2 toespace
S Specify end panel attachedleft or right (attached rightshown)
S 3 Half Spool & Rod Postattached flush with edges offiller, 8 high top and bottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
1 1/2
3 wide
Specify
3 Fillers M N O P
TF3VSR (Veneer) $ 602 $ 602 $ 602 $ 602
TF3VSRR (Veneer) 602 602 602 602
3 Fillers With One Finished End Panel
TFF3VSR (Veneer) 1081 1081 1081 1081
TFF3VSRR (Veneer) 1081 1081 1081 1081
39March 1, 2007
TALL CABINETSIE3210 Tall Accent Strips
Accent Strip M N O P
IAST3GE (Geneva Laminate) $ 36 $ 36 $ 36 $ 36
IAST3 (Wood) 142 142 142 142
IAST3H (HPL) 137 137 137 137
IAST3F (Textured Foil) 140 140 140 140
IAST6GE (Geneva Laminate) 44 44 44 44
IAST6 (Wood) 235 235 235 235
IAST6H (HPL) 227 227 227 227
IAST6F (Textured Foil) 230 230 230 230
Must specify height.Shaped one long and two short, specify for shaped four edges.Banded accent strips are banded all four sides.
IE3220 Tall Angled End Panel
Specify
Wall Space
1 1/2
6
24
Detailof
Panel
CabinetWidth
Laminate M N O P
ITAEPL (Left) $ 911 $ 911 $ 911 $ 911
ITAEPR (Right) 911 911 911 911
Solid Wood on Plywood Return
ITBAEPLV (Left) 708 708 708 708
ITAEPRV (Right) 708 708 708 708
HPL onticle Board Return
ITAEPLH (Left) 911 911 911 911
IBAEPRH (Right) 911 911 911 911
Must specify height.
40 March 1, 2007
OVEN CABINETSIE4000 84 High, 24 Deep Single Oven
24
14 1/4
41 1/4
24
Double Doors M N O P
IXOC2784 $ 912 $ 1031 $ 1031 $ 1106IXOC3084 996 1115 1115 1190IXOC3384 1069 1188 1188 1264Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2784 26 13/16 x 41 1/16 20 13/16 23 13/16 27 1/16 38 1/16
IXOC3084 29 13/16 x 41 1/16 23 13/16 26 13/16 27 1/16 38 1/16
IXOC3384 32 13/16 x 41 1/16 26 13/16 29 13/16 27 1/16 38 1/16
No shelves in top, one adjustable shelf in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4010 90 High, 24 Deep Single Oven
24
20 1/4
41 1/4
24
Double Doors M N O P
IXOC2790 $ 1125 $ 1245 $ 1245 $ 1320IXOC3090 1211 1330 1330 1406IXOC3390 1283 1403 1403 1478Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2790 26 13/16 x 41 1/16 20 13/16 23 13/16 27 1/16 38 1/16
IXOC3090 29 13/16 x 41 1/16 23 13/16 26 13/16 27 1/16 38 1/16
IXOC3390 32 13/16 x 41 1/16 26 13/16 29 13/16 27 1/16 38 1/16
One adjustable shelf in top, one adjustable shelf in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4015 93 High, 24 Deep Single Oven
24
41 1/4
23 1/4
24
Double Doors M N O P
IXOC2793 $ 1125 $ 1245 $ 1245 $ 1320IXOC3093 1211 1330 1330 1406IXOC3393 1283 1403 1403 1478Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2796 26 13/16 x 41 1/16 20 13/16 23 13/16 27 1/16 38 1/16
IXOC3096 29 13/16 x 41 1/16 23 13/16 26 13/16 27 1/16 38 1/16
IXOC3396 32 13/16 x 41 1/16 26 13/16 29 13/16 27 1/16 38 1/16
One adjustable shelf in top, one adjustable shelf in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4020 96 High, 24 Deep Single Oven
24
41 1/4
26 1/4
24
Double Doors M N O P
IXOC2796 $ 1125 $ 1245 $ 1245 $ 1320IXOC3096 1211 1330 1330 1406IXOC3396 1283 1403 1403 1478Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2796 26 13/16 x 41 1/16 20 13/16 23 13/16 27 1/16 38 1/16
IXOC3096 29 13/16 x 41 1/16 23 13/16 26 13/16 27 1/16 38 1/16
IXOC3396 32 13/16 x 41 1/16 26 13/16 29 13/16 27 1/16 38 1/16
Two adjustable shelves in top, one adjustable shelf in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
41March 1, 2007
OVEN CABINETSIE4030 84 High, 24 Deep Double Oven
24
13 1/2
60
6
Double Doors M N O P
IXOC2784D $ 992 $ 1051 $ 1073 $ 1107IXOC3084D 1064 1124 1146 1181IXOC3384D 1136 1196 1218 1252Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2784D 26 13/16 x 59 13/16 20 13/16 23 13/16 45 13/16 56 13/16
IXOC3084D 29 13/16 x 59 13/16 23 13/16 26 13/16 45 13/16 56 13/16
IXOC3384D 32 13/16 x 59 13/16 26 13/16 29 13/16 45 13/16 56 13/16
No adjustable shelf in top, one drawer in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4040 90 High, 24 Deep Double Oven
24
19 1/2
60
6
Double Doors M N O P
IXOC2790D $ 1205 $ 1265 $ 1287 $ 1322IXOC3090D 1278 1338 1360 1394IXOC3390D 1350 1410 1432 1467Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2790D 26 13/16 x 59 13/16 20 13/16 23 13/16 45 13/16 56 13/16
IXOC3090D 29 13/16 x 59 13/16 23 13/16 26 13/16 45 13/16 56 13/16
IXOC3390D 32 13/16 x 59 13/16 26 13/16 29 13/16 45 13/16 56 13/16
One adjustable shelf in top, one drawer in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4045 93 High, 24 Deep Double Oven
24
22 1/2
60
6
Double Doors M N O P
IXOC2793D $ 1205 $ 1265 $ 1287 $ 1322IXOC3093D 1278 1338 1360 1394IXOC3393D 1350 1410 1432 1467Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2796D 26 13/16 x 59 13/16 20 13/16 23 13/16 45 13/16 56 13/16
IXOC3096D 29 13/16 x 59 13/16 23 13/16 26 13/16 45 13/16 56 13/16
IXOC3396D 32 13/16 x 59 13/16 26 13/16 29 13/16 45 13/16 56 13/16
One adjustable shelf in top, one drawer in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4050 96 High, 24 Deep Double Oven
24
25 1/2
60
6
Double Doors M N O P
IXOC2796D $ 1205 $ 1265 $ 1287 $ 1322IXOC3096D 1278 1338 1360 1394IXOC3396D 1350 1410 1432 1467Finished End (HPL) 96 96 96 96Finished End (Veneer) 164 164 164 164
CUTOUTS PANEL SIZEMin.Width
Max.Width
Min.Height
Max.Height
IXOC2796D 26 13/16 x 59 13/16 20 13/16 23 13/16 45 13/16 56 13/16
IXOC3096D 29 13/16 x 59 13/16 23 13/16 26 13/16 45 13/16 56 13/16
IXOC3396D 32 13/16 x 59 13/16 26 13/16 29 13/16 45 13/16 56 13/16
Two adjustable shelves in top, one drawer in bottom.Wood cutout frame has 3 stiles and 7 rails with door edge profile allfour sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
42 March 1, 2007
OVEN CABINETSIE4060 84 High, 24 Deep Oven-Micro
24
15 1/2
58
6
20
36 1/2
Double Doors M N O P
IXOC2784M $ 1115 $ 1175 $ 1197 $ 1232
IXOC3084M 1195 1254 1277 1311
IXOC3384M 1261 1320 1342 1377
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164Both Areas Micro Area Oven Area
CUTOUTSPANELSIZE
Min. Width /Max Width
Min. Height /Max Height
Min. Height /Max Height
IXOC2784M 26 13/16 x57 13/16
20 13/16 /23 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3084M 29 13/16 x57 13/16
23 13/16 /26 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3384M 32 13/16 x57 13/16
26 13/16 /29 13/16
14 13/16 / 18 5/16 27 / 34 1/2
No adjustable shelf in top, one drawer in bottom.Wood cutout frame has 5 1/2 top and bottom rails, 5 center rail, and3 stiles with door edge profile all four sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4070 90 High, 24 Deep Oven-Micro
24
21 1/2
58
6
20
36 1/2
Double Doors M N O P
IXOC2790M $ 1329 $ 1389 $ 1411 $ 1445
IXOC3090M 1408 1468 1489 1524
IXOC3390M 1474 1534 1556 1591
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164Both Areas Micro Area Oven Area
CUTOUTSPANELSIZE
Min. Width /Max Width
Min. Height /Max Height
Min. Height /Max Height
IXOC2790M 26 13/16 x57 13/16
20 13/16 /23 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3090M 29 13/16 x57 13/16
23 13/16 /26 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3390M 32 13/16 x57 13/16
26 13/16 /29 13/16
14 13/16 / 18 5/16 27 / 34 1/2
One adjustable shelf in top, one drawer in bottom.Wood cutout frame has 5 1/2 top and bottom rails, 5 center rail, and3 stiles with door edge profile all four sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4075 93 High, 24 Deep Oven-Micro
24
24 1/2
6
58
20
36 1/2
Double Doors M N O P
IXOC2793M $ 1329 $ 1389 $ 1411 $ 1445
IXOC3093M 1408 1468 1489 1524
IXOC3393M 1474 1534 1556 1591
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164Both Areas Micro Area Oven Area
CUTOUTSPANELSIZE
Min. Width /Max Width
Min. Height /Max Height
Min. Height /Max Height
IXOC2796M 26 13/16 x57 13/16
20 13/16 /23 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3096M 29 13/16 x57 13/16
23 13/16 /26 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3396M 32 13/16 x57 13/16
26 13/16 /29 13/16
14 13/16 / 18 5/16 27 / 34 1/2
Two adjustable shelves in top, one drawer in bottom.Wood cutout frame has 5 1/2 top and bottom rails, 5 center rail, and3 stiles with door edge profile all four sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE4080 96 High, 24 Deep Oven-Micro
24
27 1/2
6
58
20
36 1/2
Double Doors M N O P
IXOC2796M $ 1329 $ 1389 $ 1411 $ 1445
IXOC3096M 1408 1468 1489 1524
IXOC3396M 1474 1534 1556 1591
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164Both Areas Micro Area Oven Area
CUTOUTSPANELSIZE
Min. Width /Max Width
Min. Height /Max Height
Min. Height /Max Height
IXOC2796M 26 13/16 x57 13/16
20 13/16 /23 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3096M 29 13/16 x57 13/16
23 13/16 /26 13/16
14 13/16 / 18 5/16 27 / 34 1/2
IXOC3396M 32 13/16 x57 13/16
26 13/16 /29 13/16
14 13/16 / 18 5/16 27 / 34 1/2
Two adjustable shelves in top, one drawer in bottom.Wood cutout frame has 5 1/2 top and bottom rails, 5 center rail, and3 stiles with door edge profile all four sides.Foil/HPL/Melamine cutout panels are solid.Cutout panel/frame shipped loose.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
43March 1, 2007
VANITY CABINETSIE5000 Standard Vanity Base
Single Door, Single Drawer,21 Deep M N O P
IXVB12 $ 359 $ 388 $ 410 $ 424
IXVB15 369 398 420 435
IXVB18 392 421 442 457
IXVB21 421 450 471 486
Single Door, Single Drawer, 18 Deep
IXVB1218 359 388 410 424
IXVB1518 369 398 420 435
IXVB1818 392 421 442 457
IXVB2118 421 450 471 486
Double Doors, Single Drawer, 21 Deep
IXVB24 473 531 553 585
IXVB27 493 550 571 604
IXVB30SFD 590 647 689 719
IXVB33SFD 607 664 676 737
IXVB36SFD 625 682 725 755
Double Doors, Single Drawer, 18 Deep
IXVB2418 473 531 553 585
IXVB2718 493 550 571 604
IXVB3018SFD 590 647 689 719
IXVB3318SFD 607 664 676 737
IXVB3618SFD 625 682 725 755
Double Doors, Double Drawers, 21 Deep
IXVB30 659 716 759 789
IXVB33 676 734 776 806
IXVB36 694 751 794 824
Double Doors, Double Drawers, 18 Deep
IXVB3018 659 716 759 789
IXVB3318 676 734 776 806
IXVB3618 694 751 794 824
Double Doors, Double Drawers With Vertical Divider, 21 Deep
IXVB42 756 814 856 886
Double Doors, Double Drawers With Vertical Divider, 18 Deep
IXVB4218 756 814 856 886
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
31 1/2 high cabinets.One adjustable shelf.
IE5005 Vanity Base Full Height
Single Door, 21 Deep M N O P
IXVBFH12 241 270 270 288
IXVBFH15 252 280 280 298
IXVBFH18 274 303 303 321
IXVBFH21 303 331 331 350
Single Door, 18 Deep
IXVBFH1218 241 270 270 288
IXVBFH1518 252 280 280 298
IXVBFH1818 274 303 303 321
IXVBFH2118 303 331 331 350
Double Door, 21 Deep
IXVBFH24 356 414 414 450
IXVBFH27 375 432 432 468
IXVBFH30 422 480 480 516
IXVBFH33 440 497 497 534
IXVBFH36 457 514 514 552
Double Doors, 18 Deep
IXVBFH2418 356 414 414 450
IXVBFH2718 375 432 432 468
IXVBFH3018 422 480 480 516
IXVBFH3318 440 497 497 534
IXVBFH3618 457 514 514 552
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
31 1/2 high cabinets.One adjustable shelf.
March 1, 2007 45
VANITY CABINETSIE5010 Tall Vanity Base
Single Door, Single Drawer,21 Deep M N O P
IXTVB12 $ 365 $ 394 $ 416 $ 431
IXTVB15 385 414 435 450
IXTVB18 413 441 463 477
IXTVB21 445 473 495 509
Single Door, Single Drawer, 18 Deep
IXTVB1218 365 394 416 431
IXTVB1518 385 414 435 450
IXTVB1818 413 441 463 477
IXTVB2118 445 473 495 509
Double Doors, Single Drawer, 21 Deep
IXTVB24 504 562 583 616
IXTVB27 534 592 613 646
IXTVB30SFD 619 677 719 749
IXTVB33SFD 629 686 729 759
IXTVB36SFD 654 712 755 785
Double Doors, Single Drawer, 18 Deep
IXTVB2418 504 562 583 616
IXTVB2718 534 592 613 646
IXTVB3018SFD 619 677 719 749
IXTVB3318SFD 629 686 729 759
IXTVB3618SFD 654 712 755 785
Double Doors, Double Drawers, 21 Deep
IXTVB30 688 746 789 819
IXTVB33 699 756 798 828
IXTVB36 723 781 824 854
Double Doors, Double Drawers, 18 Deep
IXTVB3018 688 746 789 819
IXTVB3318 699 756 798 828
IXTVB3618 723 781 824 854
Double Doors, Double Drawers With Vertical Divider, 21 Deep
IXTVB42 783 841 884 914
Double Doors, Double Drawers With Vertical Divider, 18 Deep
IXTVB4218 783 841 884 914
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
34 1/2 high cabinets.One adjustable shelf.
IE5015 Tall Vanity Base Full Height
Single Door, 21 Deep M N O P
IXTVBFH12 $ 247 $ 276 $ 276 $ 294
IXTVBFH15 268 296 296 315
IXTVBFH18 294 323 323 342
IXTVBFH21 326 355 355 374
Single Door, 18 Deep
IXTVBFH1218 247 276 276 294
IXTVBFH1518 268 296 296 315
IXTVBFH1818 294 323 323 342
IXTVBFH2118 326 355 355 374
Double Doors, 21 Deep
IXTVBFH24 386 443 443 480
IXTVBFH27 416 473 473 509
IXTVBFH30 452 509 509 545
IXTVBFH33 470 527 527 563
IXTVBFH36 487 544 544 581
Double Doors, 18 Deep
IXTVBFH2418 386 443 443 480
IXTVBFH2718 416 473 473 509
IXTVBFH3018 452 509 509 545
IXTVBFH3318 470 527 527 563
IXTVBFH3618 487 544 544 581
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
34 1/2 high cabinets.Two adjustable shelves.
March 1, 200746
VANITY CABINETSIE5020 Three Drawer Vanity Base
Full Width Single Drawers,21 Deep M N O P
IXVBDT12 $ 700 $ 700 $ 763 $ 753
IXVBDT15 707 707 771 761
IXVBDT18 743 743 807 797
IXVBDT21 776 776 840 830
IXVBDT24 801 801 864 855
IXVBDT27 826 826 890 881
IXVBDT30 851 851 915 905
IXVBDT33 876 876 940 930
IXVBDT36 900 900 965 955
Full Width Single Drawers, 18 Deep
IXVBDT1218 700 700 763 753
IXVBDT1518 707 707 771 761
IXVBDT1818 743 743 807 797
IXVBDT2118 776 776 840 830
IXVBDT2418 801 801 864 855
IXVBDT2718 826 826 890 881
IXVBDT3018 851 851 915 905
IXVBDT3318 876 876 940 930
IXVBDT3618 900 900 965 955
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
31 1/2 high cabinets.
IE5030 Tall Three Drawer Vanity Base
Full Width Single Drawers,21 Deep M N O P
IXTVBDT12 $ 732 $ 732 $ 795 $ 786
IXTVBDT15 742 742 806 796
IXTVBDT18 755 755 819 809
IXTVBDT21 786 786 850 840
IXTVBDT24 806 806 869 860
IXTVBDT27 826 826 890 881
IXTVBDT30 862 862 926 917
IXTVBDT33 889 889 953 943
IXTVBDT36 915 915 979 969
Full Width Single Drawers, 18 Deep
IXTVBDT1218 732 732 795 786
IXTVBDT1518 742 742 806 796
IXTVBDT1818 755 755 819 809
IXTVBDT2118 786 786 850 840
IXTVBDT2418 806 806 869 860
IXTVBDT2718 826 826 890 881
IXTVBDT3018 862 862 926 917
IXTVBDT3318 889 889 953 943
IXTVBDT3618 915 915 979 969
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
34 1/2 high cabinets.
March 1, 2007 47
VANITY CABINETSIE5040 Tall Four Drawer Vanity Base
Full Width Single Drawers,21 Deep M N O P
IXTVBD12 $ 879 $ 879 $ 964 $ 951
IXTVBD15 895 895 981 968
IXTVBD18 910 910 995 982
IXTVBD21 941 941 1027 1014
IXTVBD24 962 962 1046 1034
IXTVBD27 981 981 1066 1054
IXTVBD30 1022 1022 1106 1094
IXTVBD33 1046 1046 1130 1118
IXTVBD36 1069 1069 1154 1142
Full Width Single Drawers, 18 Deep
IXTVBD1218 879 879 964 951
IXTVBD1518 895 895 981 968
IXTVBD1818 910 910 995 982
IXTVBD2118 941 941 1027 1014
IXTVBD2418 962 962 1046 1034
IXTVBD2718 981 981 1066 1054
IXTVBD3018 1022 1022 1106 1094
IXTVBD3318 1046 1046 1130 1118
IXTVBD3618 1069 1069 1154 1142
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
34 1/2 high cabinets.
IE5050 Vanity Sink Base
Single Door, Single Drwr Front,21 Deep M N O P
IXVSB12 $ 331 $ 360 $ 382 $ 396
IXVSB15 336 365 387 402
IXVSB18 343 371 392 407
IXVSB21 348 377 397 413
Single Door, Single Drwr Front, 18 Deep
IXVSB1218 331 360 382 396
IXVSB1518 336 365 387 402
IXVSB1818 343 371 392 407
IXVSB2118 348 377 397 413
Double Doors, Single Drawer Front, 21 Deep
IXVSB24 369 427 449 482
IXVSB27 385 442 464 497
IXVSB30 403 461 482 514
IXVSB33 432 490 510 543
IXVSB36 448 505 527 560
IXVSB42 494 552 572 605
Double Doors, Single Drawer Front, 18 Deep
IXVSB2418 369 427 449 482
IXVSB2718 385 442 464 497
IXVSB3018 403 461 482 514
IXVSB3318 432 490 510 543
IXVSB3618 448 505 527 560
IXVSB4218 494 552 572 605
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
31 1/2 high cabinets.For tilt outs add $66.
March 1, 200748
VANITY CABINETSIE5060 Tall Vanity Sink Base
Single Door, SingleDrawer Front, 21 Deep M N O P
IXTVSB12 $ 350 $ 379 $ 400 $ 415
IXTVSB15 355 384 405 420
IXTVSB18 360 389 411 425
IXTVSB21 365 394 416 431
Single Door, Single Drawer Front, 18 Deep
IXTVSB1218 350 379 400 415
IXTVSB1518 355 384 405 420
IXTVSB1818 360 389 411 425
IXTVSB2118 365 394 416 431
Double Doors, Single Drawer Front, 21 Deep
IXTVSB24 388 446 467 500
IXTVSB27 418 475 497 530
IXTVSB30 436 494 514 548
IXTVSB33 451 508 530 563
IXTVSB36 463 521 541 574
IXTVSB42 509 567 589 621
Double Doors, Single Drawer Front, 18 Deep
IXTVSB2418 388 446 467 500
IXTVSB2718 418 475 497 530
IXTVSB3018 436 494 514 548
IXTVSB3318 451 508 530 563
IXTVSB3618 463 521 541 574
IXTVSB4218 509 567 589 621
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
34 1/2 high cabinets.For tilt outs add $66.
IE5070 Vanity Sink Front
Double Doors, SingleDrawer Front, 21 Deep M N O P
IXVSF24 $ 270 $ 327 $ 349 $ 382
IXVSF27 281 338 359 393
IXVSF30 291 349 369 403
IXVSF33 292 338 359 393
IXVSF36 334 392 414 447
IXVSF42 359 417 438 471
Double Doors, Single Drawer Front, 18 Deep
IXVSF2418 270 327 349 382
IXVSF2718 281 338 359 393
IXVSF3018 291 349 369 403
IXVSF3318 292 338 359 393
IXVSF3618 334 392 414 447
IXVSF4218 359 417 438 471
31 1/2 high fronts.For tilt outs add $66.
IE5080 Desk Drawer
21 Deep M N O P
IXDD24 $ 328 $ 328 $ 350 $ 347
IXDD27 338 338 359 356
IXDD30 343 343 363 360
IXDD33 348 348 368 365
IXDD36 363 363 385 382
18 Deep
IXDD2418 328 328 350 347
IXDD2718 338 338 359 356
IXDD3018 343 343 363 360
IXDD3318 348 348 368 365
IXDD3618 363 363 385 382
24 Deep
IXDD2424 328 328 350 347
IXDD2724 338 338 359 356
IXDD3024 343 343 363 360
IXDD3324 348 348 368 365
IXDD3624 363 363 385 382
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
March 1, 2007 49
VANITY CABINETSIE5085 30 High File Drawer
21 Deep M N O P
IXDFD1630 $ 903 $ 903 $ 946 $ 939IXSFD1630 928 928 993 983IXDFD1930 903 903 946 939IXSFD1930 928 928 993 983
18 Deep
IXDFD161830 903 903 946 939IXSFD161830 928 928 993 983IXDFD191830 903 903 946 939IXSFD191830 928 928 993 983
24 Deep
IXDFD162430 903 903 946 939IXSFD162430 928 928 993 983IXDFD192430 903 903 946 939IXSFD192430 928 928 993 983Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
Side-mount, full-extension drawer guides on file drawers only.SFD: single file drawer, two shallow drawers.DFD: double file drawer.30 high cabinets.
IE5090 31 1/2 High File Drawer
21 Deep M N O P
IXDFD16 $ 903 $ 903 $ 946 $ 939IXSFD16 928 928 993 983IXDFD19 903 903 946 939IXSFD19 928 928 993 983
18 Deep
IXDFD1618 903 903 946 939IXSFD1618 928 928 993 983IXDFD1918 903 903 946 939IXSFD1918 928 928 993 983
24 Deep
IXDFD1624 903 903 946 939IXSFD1624 928 928 993 983IXDFD1924 903 903 946 939IXSFD1924 928 928 993 983Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
Side-mount, full-extension drawer guides on file drawers only.SFD: single file drawer, two shallow drawers.DFD: double file drawer.31 1/2 high cabinets.
IE5100 Vanity Sink Drawer
Double Doors, Two Drawers,Single Drawer Front, 21 Deep M N O PIXVSD36 $ 735 $ 792 $ 856 $ 883IXVSD42 790 848 912 938
Double Doors, Two Drawers, Single Drawer Front, 18 DeepIXVSD3618 735 792 856 883IXVSD4218 790 848 912 938
Four Doors, Two Drawers, Single Drawer Front, 21 DeepIXVSD48 901 1017 1081 1144IXVSD60 1135 1250 1314 1378
Four Doors, Two Drawers, Single Drawer Front, 18 DeepIXVSD4818 901 1017 1081 1144IXVSD6018 1135 1250 1314 1378Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86
Does not allow for double bowl sink.31 1/2 high cabinets.
March 1, 200750
VANITY CABINETSIE5110 Tall Vanity Sink Drawer
Double Doors, Two Drawers,Single Drawer Front, 21 Deep M N O PIXTVSD36 $ 796 $ 854 $ 918 $ 945IXTVSD42 852 910 973 1000
Double Doors, Two Drawers, Single Drawer Front, 18 DeepIXTVSD3618 796 854 918 945IXTVSD4218 852 910 973 1000
Four Doors, Two Drawers, Single Drawer Front, 21 DeepIXTVSD48 965 1080 1144 1207IXTVSD60 1200 1314 1379 1442
Four Doors, Two Drawers, Single Drawer Front, 18 DeepIXTVSD4818 965 1080 1144 1207IXTVSD6018 1200 1314 1379 1442Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86Does not allow for double bowl sink.34 1/2 high cabinets.
IE5120 Combination Bowl Drawer Stack
Double Doors, Three Drawers,Single Drawer Front, OffsetBowl Only, 21 Deep M N O PIXCVD36 $ 1035 $ 1093 $ 1178 $ 1202IXCVD42 1134 1192 1277 1301IXCVD48 1232 1289 1374 1397
Double Doors, Three Drawers, Single Drawer Front,Offset Bowl Only, 18 Deep
IXCVD3618 1035 1093 1178 1202IXCVD4218 1134 1192 1277 1301IXCVD4818 1232 1289 1374 1397
Double Center Doors, Six Drawers, Single Drawer Front, 21 DeepIXCVDD48 1603 1661 1810 1824IXCVDD54 1710 1768 1917 1930IXCVDD60 1823 1881 2030 2044IXCVDD72 1955 2013 2162 2176
Double Center Doors, Six Drawers, Single Drawer Front, 18 DeepIXCVDD4818 1603 1661 1810 1824IXCVDD5418 1710 1768 1917 1930IXCVDD6018 1823 1881 2030 2044IXCVDD7218 1955 2013 2162 2176Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86Does not allow for double bowl sink.31 1/2 high cabinets.Drawers on right 36 , 42 , and 48 wide cabinets. Specify if different.
IE5125 Combination Bowl Drawer StackFalse Drawer
Single Door, 2 Drawers, SingleDrawer Front, 21 Deep M N O PIXCVD24FD $ 748 $ 777 $ 841 $ 850IXCVD30FD 874 901 966 974IXCVD33FD 936 965 1029 1037Single Door, 2 Drawers, Single Drawer Front, 18 DeepIXCVD2418FD 748 777 841 850IXCVD3018FD 874 901 966 974IXCVD3318FD 936 965 1029 1037Double Doors, 2 Drwrs, Single Full Width False Drwr Front, 21 DeepIXCVD36FD 962 1019 1104 1128IXCVD42FD 1061 1118 1204 1228Double Doors, 2 Drwrs, Single Full Width False Drwr Front, 18 DeepIXCVD3618FD 962 1019 1104 1128IXCVD4218FD 1061 1118 1204 1228Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86Does not allow for double bowl sink.31 1/2 high cabinets.Drawers on right. Specify if different.
IE5130 Tall Combination Bowl Drawer Stack
Double Doors, 4 Drawers,Single Drawer Front, OffsetBowl Only, 21 Deep M N O PIXTCVD36 $ 1283 $ 1341 $ 1448 $ 1468IXTCVD42 1383 1441 1547 1567IXTCVD48 1592 1649 1755 1776Double Center Doors, 4 Drawers, Single Drawer Front, 18 DeepIXTCVD3618 1283 1341 1448 1468IXTCVD4218 1383 1441 1547 1567IXTCVD4818 1592 1649 1755 1776Double Center Doors, 8 Drawers, Single Drawer Front, 21 DeepIXTCVDD48 2036 2094 2285 2294IXTCVDD54 2119 2176 2368 2375IXTCVDD60 2240 2298 2489 2496IXTCVDD72 2283 2341 2533 2540Double Center Doors, 8 Drawers, Single Drawer Front, 18 DeepIXTCVDD4818 2036 2094 2285 2294IXTCVDD5418 2119 2176 2368 2375IXTCVDD6018 2240 2298 2489 2496IXTCVDD7218 2283 2341 2533 2540Finished End (HPL) 45 45 45 45Finished End (Veneer) 86 86 86 86Does not allow for double bowl sink.34 1/2 high cabinets.Drawers on right 36 , 42 , and 48 wide cabinets. Specify if different.
March 1, 2007 51
VANITY CABINETSIE5135 Tall Combination Bowl Drawer Stack
False Drawer
Single Door, Three Drawers,Single Drawer Front, 21 Deep M N O P
IXTCVD24FD $ 998 $ 1027 $ 1112 $ 1117
IXTCVD30FD 1123 1151 1237 1242
IXTCVD33FD 1183 1212 1298 1303
Single Door, Three Drawers, Single Drawer Front, 18 Deep
IXTCVD2418FD 998 1027 1112 1117
IXTCVD3018FD 1123 1151 1237 1242
IXTCVD3318FD 1183 1212 1298 1303
Double Doors, Three Drawers,Single Full Width False Drawer Front, 21 Deep
IXTCVD36FD 1210 1268 1374 1394
IXTCVD42FD 1309 1366 1473 1494
Double Doors, Three Drawers,Single Full Width False Drawer Front, 18 Deep
IXTCVD3618FD 1210 1268 1374 1394
IXTCVD4218FD 1309 1366 1473 1494
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Does not allow for double bowl sink.34 1/2 high cabinets.Drawers on right. Specify if different.
IE5140 Double Bowl Drawer Stack
Double Doors, Three Drawers,Two Drawer Fronts, 21 Deep M N O P
IXDVD60 $ 1334 $ 1449 $ 1556 $ 1611
IXDVD72 1395 1511 1618 1674
Double Doors, Three Drawers, Two Drawer Fronts, 18 Deep
IXDVD6018 1334 1449 1556 1611
IXDVD7218 1395 1511 1618 1674
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Does allow for double bowl sink.31 1/2 high cabinets.
IE5150 Tall Double Bowl Drawer Stack
Double Doors, Four Drawers,Two Drawer Fronts, 21 Deep M N O P
IXTDVD60 $ 1547 $ 1662 $ 1790 $ 1843
IXTDVD72 1638 1753 1882 1934
Double Doors, Four Drawers, Two Drawer Fronts, 18 Deep
IXTDVD6018 1547 1662 1790 1843
IXTDVD7218 1638 1753 1882 1934
Finished End (HPL) 45 45 45 45
Finished End (Veneer) 86 86 86 86
Does allow for double bowl sink.34 1/2 high cabinets.
IE5160 84 High Vanity Tall Utility
Single Doors, 21 Deep M N O P
IXVTU15 $ 721 $ 808 $ 808 $ 862
IXVTU18 767 853 853 908
IXVTU21 815 900 900 955
Single Doors, 18 Deep
IXVTU1518 721 808 808 862
IXVTU1818 767 853 853 908
IXVTU2118 815 900 900 955
Double Doors, 21 Deep
IXVTU24 969 1142 1142 1250
IXVTU27 1049 1221 1221 1330
IXVTU30 1131 1304 1304 1413
IXVTU36 1258 1430 1430 1539
Double Doors, 18 Deep
IXVTU2418 969 1142 1142 1250
IXVTU2718 1049 1221 1221 1330
IXVTU3018 1131 1304 1304 1413
IXVTU3618 1258 1430 1430 1539
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Full depth adjustable shelves, four in upper section, one in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
March 1, 200752
VANITY CABINETSIE5170 84 High Tall Vanity Tall Utility
Single Doors, 21 Deep M N O P
IXTVTU15 $ 721 $ 808 $ 808 $ 862
IXTVTU18 767 853 853 908
IXTVTU21 815 900 900 955
Single Doors, 18 Deep
IXTVTU1518 721 808 808 862
IXTVTU1818 767 853 853 908
IXTVTU2118 815 900 900 955
Double Doors, 21 Deep
IXTVTU24 969 1142 1142 1250
IXTVTU27 1049 1221 1221 1330
IXTVTU30 1131 1304 1304 1413
IXTVTU36 1258 1430 1430 1539
Double Doors, 18 Deep
IXTVTU2418 969 1142 1142 1250
IXTVTU2718 1049 1221 1221 1330
IXTVTU3018 1131 1304 1304 1413
IXTVTU3618 1258 1430 1430 1539
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Full depth adjustable shelves, three in upper section, two in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE5180 84 High Vanity Tall DrawerWith Three Drawers
Single Door, Single Drawers,21 Deep M N O P
IXVT3D15 $ 1279 $ 1337 $ 1400 $ 1427
IXVT3D18 1327 1385 1449 1476
IXVT3D21 1370 1427 1491 1518
Single Door, Single Drawers, 18 Deep
IXVT3D1518 1279 1337 1400 1427
IXVT3D1818 1327 1385 1449 1476
IXVT3D2118 1370 1427 1491 1518
Double Doors, Single Drawers, 21 Deep
IXVT3D24 1508 1624 1687 1750
IXVT3D27 1589 1704 1768 1831
IXVT3D30 1667 1782 1846 1910
IXVT3D36 1749 1864 1928 1991
Double Doors, Single Drawers, 18 Deep
IXVT3D2418 1508 1624 1687 1750
IXVT3D2718 1589 1704 1768 1831
IXVT3D3018 1667 1782 1846 1910
IXVT3D3618 1749 1864 1928 1991
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Four full depth adjustable shelves in upper section.Three drawers in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
March 1, 2007 53
VANITY CABINETSIE5190 84 High Tall Vanity Tall Drawer
With Four Drawers
Single Door, Single Drawers,21 Deep M N O P
IXTVT4D15 $ 1520 $ 1577 $ 1663 $ 1686
IXTVT4D18 1568 1626 1711 1735
IXTVT4D21 1609 1667 1752 1776
Single Door, Single Drawers, 18 Deep
IXTVT4D1518 1520 1577 1663 1686
IXTVT4D1818 1568 1626 1711 1735
IXTVT4D2118 1609 1667 1752 1776
Double Doors, Single Drawers, 21 Deep
IXTVT4D24 1749 1864 1950 2010
IXTVT4D27 1829 1945 2030 2090
IXTVT4D30 1913 2028 2112 2172
IXTVT4D36 1992 2107 2193 2252
Double Doors, Single Drawers, 18 Deep
IXTVT4D2418 1749 1864 1950 2010
IXTVT4D2718 1829 1945 2030 2090
IXTVT4D3018 1913 2028 2112 2172
IXTVT4D3618 1992 2107 2193 2252
Finished End (HPL) 96 96 96 96
Finished End (Veneer) 164 164 164 164
Three full depth adjustable shelves in upper section.Four drawers in lower section.IXADDLEG: optional legs and sockets, sides not extended - no upcharge.
IE5210 Vanity Wall Cabinet
Single Door M N O P
IXVW1530 $ 199 $ 227 $ 227 $ 245
IXVW1830 218 247 247 265
IXVW2130 239 268 268 286
Finished End (HPL) 32 32 32 32
Finished End (Veneer) 63 63 63 63
8 deep cabinet.Two adjustable shelves.
IE5220 Vanity Tapered Leg
Shipped Loose M N O P
IVTL (Solid Wood) $ 230 $ 230 $ 230 $ 230
IVTLH (HPL) 141 141 141 141
IVTLL (Laminate) 114 114 114 114
IVTLV (Veneer) 193 193 193 193
Specify for 18 , 21 or 24 deep.Height is 31 1/2 .Depth is 7/8 deeper.
IE5230 Wall Mount Bracket
Shipped Loose M N O P
IWMB21 (Solid Wood) $ 173 $ 173 $ 173 $ 173
IWMB21H (HPL - Laminate) 91 91 91 91
IWMB21L (Laminate) 70 70 70 70
IWMB21V (Veneer) 134 134 134 134
IWMB24 (Solid Wood) 173 173 173 173
IWMB24H (HPL - Laminate) 91 91 91 91
IWMB24L (Laminate) 70 70 70 70
IWMB24V (Veneer) 134 134 134 134
Height is 23 .Bracket is 7/8 deeper than code.
March 1, 200754
VANITY CABINETSIE5240 Wall Toilet Cabinet
Double Doors M N O P
IXWT2439 $ 492 $ 549 $ 549 $ 585
IXWT2439H (HPL) 683 741 741 777
IXWT2439V (Veneer) 683 741 741 777
IXWT2739 492 549 549 585
IXWT2739H (HPL) 683 741 741 777
IXWT2739V (Veneer) 683 741 741 777
Includes finished interior and both ends finished, no charge.8 deep.
IE5250 Tri-View Mirror
Three Doors M N O P
TV2430 $ 703 $ 703 $ 703 N/A
TV3030 703 703 703 N/A
TV3630 762 762 762 N/A
TV4830 941 941 941 N/A
Includes natural finished interior and both ends finished, no charge.Includes mirrors.Traditional construction.Standard Lancaster Square wood door frame only.Three adjustable shelves.Box depth is 3 3/4 .Cabinet depth is 4 1/2Rough opening recessed mounting:TV2430 23 x 29TV3030 29 x 29TV3630 35 x 29TV4830 47 x 29
IE5260 Mirrored Medicine Cabinet
Single Door M N O P
MC1830 $ 553 $ 553 $ 553 N/A
MC2430 703 703 703 N/A
Includes natural finished interior and both ends finished, no charge.Includes mirrors.Traditional construction.Standard Lancaster wood door frame only.Three adjustable shelves.Box depth is 3 3/4 .Cabinet depth is 4 1/2Rough opening recessed mounting:MC1830 17 x 29MC2430 23 x 29
IE5270 Vanity Fillers
Fillers M N O P
IVF3L (Laminate) $ 66 $ 66 $ 66 $ 66
IVF3V (Veneer) 93 93 93 93
IVF3H (HPL) 90 90 90 90
IVF6L (Laminate) 74 74 74 74
IVF6V (Veneer) 106 106 106 106
IVF6H (HPL) 102 102 102 102
Fillers With One Finished End Panel
IVFF3 (Laminate) 232 232 232 232
IVFF3V (Veneer) 242 242 242 242
IVFF3H (HPL) 232 232 232 232
IVFF6 (Laminate) 243 243 243 243
IVFF6V (Veneer) 253 253 253 253
IVFF6H (HPL) 243 243 243 243
Fillers With Two Finished End Panels
IVFF3D (Laminate) 376 376 376 376
IVFF3DV (Veneer) 391 391 391 391
IVFF3DH (HPL) 376 376 376 376
IVFF6D (Laminate) 383 383 383 383
IVFF6DV (Veneer) 398 398 398 398
IVFF6DH (HPL) 383 383 383 383
Must specify for finished left or right.
March 1, 2007 55
VANITY CABINETSIE5275 3 Vanity Fillers -- Veneer With
Half Spool and Rod Post Attached
S Flush toe standard
S Shipped assembled
S Standard at 21 deep
S Specify end panel attached left or right(attached right shown)
S 3 Half Spool & Rod Post attached flushwith edges of filler, 8 high top and bottom
S SR = Plain Rod
S SRR = Reed Rod
S Art For Everyday, Inc.www.afe-inc.com
1 1/2
3 wide
Specify
3 Fillers M N O P
VF3VSR (Veneer) $ 357 $ 357 $ 357 $ 357
VF3VSRR (Veneer) 357 357 357 357
3 Fillers With One Finished End Panel
VFF3VSR (Veneer) 506 506 506 506
VFF3VSRR (Veneer) 506 506 506 506
3 Fillers With Two Finished End Panels
VFF3DVSR (Veneer) 655 655 655 655
VFF3DVSRR (Veneer) 655 655 655 655
IE5280 Vanity Accent Strips
Accent Strip M N O P
IAS3GE (Geneva Laminate) $ 17 $ 17 $ 17 $ 17
IAS3 (Wood) 92 92 92 92
IAS3H (HPL) 89 89 89 89
IAS3F (Textured Foil) 92 92 92 92
IAS6GE (Geneva Laminate) 28 28 28 28
IAS6 (Wood) 116 116 116 116
IAS6H (HPL) 111 111 111 111
IAS6F (Textured Foil) 114 114 114 114
Shaped one long and two short, specify for shaped four edges.Banded accent strips are banded all four sides.
March 1, 200756
MISCELLANEOUS ACCESSORIESIE6000 Standard Wood Valances
5
ScallopCurve
Straight
3 - 6
3 1/2 HighV27 $ 107V30 107V36 107V48 133V60 151V72 172V84 234V96 265
5 HighVX27 122VX30 122VX36 122VX48 147VX60 175VX72 204VX84 274VX96 310
9 1/2 HighVXX27 166VXX30 166VXX36 166VXX48 211VXX60 250VXX72 290VXX84 375VXX96 424VAX (Attach to cabinet) 57DECOR (Decorative edge) 45BEAD (Beaded edge) 45
IE6010 Arched Valance
Solid Wood (5 High)VX30A $ 122VX36A 122VX48A 147VX60A 175
Textured Foil (5 High)VX30A 77VX36A 86VX48A 105VX60A 124
Satin and Woodgrain Foil (5 High)VX30A 83VX36A 93VX48A 113VX60A 136
IE6020 Laminate/Veneer Valance
Laminate (4 High)V48 $ 34V60 41V72 49V84 58V96 63Veneer (4 High)V48V 83V60V 106V72V 122V84V 143V96V 161HPL (4 High)V48H 60V60H 82V72H 98V84H 118V96H 136Laminate (9 1/2 High)VX48 42VX60 51VX72 61VX84 71VX96 81Veneer (9 1/2 High)VX48V 123VX60V 157VX72V 185VX84V 217VX96V 246HPL (9 1/2 High)VX48H 85VX60H 112VX72H 134VX84H 159VX96H 183
IE6030 Laminate/Veneer Soffit Closure Panel
LaminateSP48L $ 52SP60L 66SP72L 80SP84L 106SP96L 119VeneerSP48V 123SP60V 147SP72V 167SP84V 224SP96V 253HPLSP48H 73SP60H 92SP72H 111SP84H 149SP96H 165
57March 1, 2007
MISCELLANEOUS ACCESSORIESIE6040 Wood Moldings
MBASEo m c h a
MBATo m c
0.875
1.625
0.75
1.5
MBULLo m c h
MCEILo m c hMCHAIR2(X)
o m c h a
MCCOVEo m c h a
MCOVEo m c h a
2.25
3
1.75
120_
MCROWNBo m c h a
120_
3.1875
MCROWNEDo m c a
MCROWNSPo m c
MCROWNENGo m c
2
120_
2.75
3
2.625
3
120_
2.75
0.625
1
0.5
3
MCROWNCo m c h
MCROWN8(X)o m c h a
2.5
0.555
3.571.625
135_
MCROWNSo m c h a
MCROWN2(X)o m c h a
MCROWN9(X)o m c h a
3.16
3.16
MCROWNM(X)o m c h a
MCROWN4(X)o m c h a
MCROWN6(X)o m c h a
1
0.5
1.6250.75
MCROWNL(X)o m c h (8 lengths only)
MDEC(Specify Edge Profile)
o m c h a
6040Code Description Per Lin. Ft.
MBASE Base Shoe mldg 0 -- 8 $ 2.50
MBAT Batten mldg 0 -- 8 2.50
MBULL Bullnose (1 1/2 ) mldg 0 -- 8 19.00
MCEIL* Ceiling Cove mldg 0 -- 8 3.50
MCHAIR2* 3/4 Chair Rail mldg 0 -- 8 9.40
MCHAIR2X 3/4 Chair Rail mldg 8 -- 10 14.10
MCCOVE 3/4 Convex Cove mldg 0 -- 8 6.50
MCOVE Cove mldg 0 -- 8 2.50
MCROWNB Beaded Crown mldg 0 -- 8 25.00
MCROWNED Edgewater Crown mldg 0 -- 8 25.00
MCROWNSP Springdale Crown mldg 0 -- 8 25.00
MCROWNENG Englebrook Crown mldg 0 -- 8 25.00
MCROWNC Convex Crown mldg 0 -- 8 per quote
MCROWN2* 3 1/8 Sm. Crown mldg 0 -- 8 13.00
MCROWN2X 3 1/8 Sm. Crown mldg 8 -- 10 20.00
MCROWN8* Shaker Crown mldg 0 -- 8 13.00
MCROWN8X Shaker Crown mldg 8 -- 10 19.50
MCROWN9* Lg. Shaker Crown mldg 0 -- 8 19.00
MCROWN9X Lg. Shaker Crown mldg 8 -- 10 28.50
MCROWNS Straight Crown mldg 0 -- 8 25.00
MCROWN6* 4 Insert Crown mldg 0 -- 8 19.00
MCROWN6X 4 Insert Crown mldg 8 -- 10 28.50
MCROWN4* 4 1/2 Lg. Crown mldg 0 -- 8 19.00
MCROWN4X 4 1/2 Lg. Crown mldg 8 -- 10 28.50
MCROWNM* 1 5/8 Mini Crown mldg 0 -- 8 9.40
MCROWNMX 1 5/8 Mini Crown mldg 8 -- 10 14.10
MCROWNL Light Rail Crown mldg 0 -- 8 13.00
MCROWNLX Light Rail Crown mldg 8 -- 10 19.50
MDEC 2 1/2 Decor Edge mldg 0 -- 8 15.00
* Available With Molding Return Attached --Add To Price of Molding
MRET 3/4 x 1 1/2 Return Attached 0 -- 8 6.40
MRET3 3/4 x 3 Return Attached 0 -- 8 15.00
Moldings that are available >8 -- 10 are also avaliableup to 12 (code ends with an ”X”); call for pricing.
Bold lines represent finished area; double thelisted price if specifying finish all.
KEY: o = oakm = maplec = cherryh = hickorya = alder
58 March 1, 2007
MISCELLANEOUS ACCESSORIESIE6040 Wood Moldings (Continued)
MESSo m c a
3/4
Partial FaceView
MDENT1o m c
8 lengths only
.811
.348
MFB2o m c h a
MFB4o m c h a
MHTo m c h a
MHTSSquareo m c h a
MINSETo m c h a
MTLBo m c h a
MLDG135(135_)o m c a
MOSCo m c h a
MLOSCo m c h
PRAILPo m c a
MPROo m c a
MRISE3o m c h a
MRISE3DECo m c h a
MRISE6o m c h a
MRISE6DECo m c h a
MROPEo m c h
8 lengths only
MRSB2(1 5/8 )o m c h a
MSCB(11/16 bevel)o m c h a
MLSCB(1 1/4 radius)
o m c h
MSQSOFo m c a
MLDGTo m c a
0 - 4 lengths only
6040Code Description Per Lin. Ft.
MDENT1 3/4 Dentil mldg (8 pieces only) $ 19.00
MESS Essex mldg 0 -- 8 2.50
MFB2* 3 1/2 Furn Base mldg 0 -- 8 13.00
MFB2X 3 1/2 Furn Base mldg >8 -- 10 19.50
MFB4* 4 1/2 Furn Base mldg 0 -- 8 15.00
MFB4X 4 1/2 Furn Base mldg >8 -- 10 22.50
MHT* Hardwood Edge Cove mldg 0 -- 8 3.50
MHTS* Hardwood Edge Sq. mldg 0 -- 8 3.50
MINSET 2 1/4 Inset mldg 0 -- 8 11.00
MTLB Light Baffel--Solid mldg 0 -- 8 15.00
MLDG135 135_ Corner mldg 0 -- 8 19.00
MOSC Outside Corner mldg 0 -- 8 2.50
MLOSC 1x1 Lg. Outside Corner mldg 0 -- 8 3.50
PRAILP 5 Plate Rail mldg 0 -- 8 40.00
MPRO Provincial Overlay mldg 0 -- 8 2.50
MRISE3 3 High Sq. Riser w/ret 0 -- 8 21.00
MRISE3DEC 3 High Dec. Riser w/ret 0 -- 8 21.00
MRISE6 6 High Sq. Riser w/ret 0 -- 8 29.00
MRISE6DEC 6 High Dec. Riser w/ret 0 -- 8 29.00
MROPE Rope mldg 3/4 x 3/8 (8 pieces only) 9.40
MRSB2 1 5/8 Stop mldg 0 -- 8 3.60
MSCB Scribe mldg 0 -- 8 2.50
MLSCB 1 1/4 Lg. Scribe mldg 0 -- 8 5.70
MSQSOF Sq. Soffit mldg 3/4 x 3/4 0 -- 8 2.50
MLDGT T mldg 0 -- 4 only 2.50
* Available With Molding Return Attached --Add To Price of Molding
MRET 3/4 x 1 1/2 Return Attached 0 -- 8 6.40
MRET3 3/4 x 3 Return Attached 0 -- 8 15.00
Moldings that are available >8 -- 10 are also avaliableup to 12 (code ends with an ”X”); call for pricing.
Bold lines represent finished area; double thelisted price if specifying finish all.
KEY: o = oakm = maplec = cherryh = hickorya = alder
59March 1, 2007
MISCELLANEOUS ACCESSORIESIE6050 Foil Wrapped Moldings
#1408Scribe
#1307Windsor
#1304Colony
Textured, Per Lineal Foot8 piece only
Colony #1304 $ 10.25Scribe #1408 4.62Windsor #1307 9.25
Satin FoilColony #1304 14.88Scribe #1408 9.25Windsor #1307 13.00
IE6060 Laminate Moldings
Straight Molding
L Molding
Straight Molding(3 pieces stacked)
Cabinet
Soffit
Cabinet
Section View ofLight Baffle(3/4 x 2 )
Section View ofSoffit Molding(3/4 x 1 1/4 )
Laminate Soffit (Traditional) (3/4 x 1 1/4 )0 - 8 (Per Lineal Foot) $ 1.70
HPL Soffit (Traditional) (3/4 x 1 1/4 )0 - 8 (Per Lineal Foot) 2.20
12 outside radius 61.00
12 inside radius 61.00
Laminate Light Baffle (3/4 x 2 )0 - 8 (Per Lineal Foot) 4.10
HPL Light Baffle (3/4 x 2 )0 - 8 (Per Lineal Foot) 10.00
12 outside radius 61.00
12 inside radius 61.00
HPL Straight Molding0 - 8 (Per Lineal Foot) 21.00
HPL L-Molding0 - 8 (Per Lineal Foot) 48.00
8 maximum length.
IE6070 Paneling
WidthHeight
Melamine1/4 2-sided Melamine $ 11.003/4 2-sided Melamine 9.20
HPL on Particle Board1/4 1-sided HPL 12.001/2 1-sided HPL 12.003/4 1-sided HPL 12.003/4 2-sided HPL 20.00
HPL on Plywood1/4 1-sided HPL 16.001/2 1-sided HPL 16.003/4 1-sided HPL 16.003/4 2-sided HPL 25.00
Finished1/8 Plywood 11.001/4 Plywood 16.001/4 Beadboard 20.001/2 Plywood 24.005/8 Plywood 25.003/4 Plywood 26.003/4 Fibercore (veneer) 26.00
Banding Applied, Per Lineal FootReal Wood 4.40
PVC 4.80
HPL (not available on cabinets) 3.40
3mm PVC 6.80
3mm Real Wood 9.30
Round everything up to next square foot.
+20% to finish both sides, +50% to finish all (must be able to write onone edge, specify.)
IE6080 1/4 Fibercore Island Panel
WidthHeight
S 96 x 34 1/2 maximum, grain runs34 1/2 direction
Finished Per Square Foot1/4 Fibercore $ 16
Round everything up to next square foot.
+20% to finish both sides, +50% to finish all (must be able to write onone edge, specify.)
60 March 1, 2007
MISCELLANEOUS ACCESSORIESIE6090 Solid Hardwood
Width
Height
Finished Per Square Foot5/8 Solid Hardwood $ 543/4 Solid Hardwood 54
Round everything up to next square foot.
+20% to finish both sides, +50% to finish all (must be able to write onone edge, specify.)
IE6100 3/4 Face Frame/Solid Material
Finished Per Lineal FootMSTL (3/4 x 1 1/2 , No Dado) $ 4.20
SOLID1 (3/4 x 3 1/2 , No Dado) 13.00
SOLID2 (3/4 x 7 , No Dado) 21.00
DECOR (Decorative Edge) each 45.00
Round everything up to next lineal foot.Over 8 long, add 50%.
+20% to finish both sides, +50% to finish all (must be able to write onone edge, specify.)
IE6110 Dishwasher Panels
DWRL (Laminate) $ 197
DWRW (Wood) 360
DWRH (HPL) 228
DWRF (Textured Foil) 319
SCOOP 102
No reveal panels with spacer, add $468.
IE6115 Wainscot
S All stiles and rails are 2 1/4standard except when 34 1/2high or with base cabinets, then5 3/4 bottom rail; specify for5 3/4 or 2 1/4 bottom rail anytime, no charge
S Panels will be 12 - 20 wide
S Not available in mitered, foil,and slab style doors
S Wainscot over 45 wide will beshipped in sections; beforeinstalling, remove the “blank”stile and slide panels together;“blank” stiles will be a differentwood specie
Per Square FootWCP $ 68
Round up to next square foot.Add 20% for custom arrangements.
IE6120 Material Pricing
Specie PremiumWhite Melamine standard
Maple Melamine standard
Melamine Geneva* --5%
Red Oak standard
Character Oak standard
Hard Maple* +8%
Character Maple* +8%
Hickory* --5%
Character Hickory* --5%
Cherry* +15%
Character Cherry* +15%
Alder standard
Character Alder standard
HPL Orders (Solid Matte Colors) standard
* Apply premiums to entire order in addition to any finish premiums(finish premiums are cumulative).
IE6130 Finish Pricing
S See Company Policies and FinishingFacts section in the Technical Guidefor color descriptions, details, andfinishes that are recommended tohave a signed product awarenessdeclaration
S Additional lead times may apply, seeFinishing Facts section in TechnicalGuide
Finish PremiumNatural --5%
Unfinished --10%
Painted +5%
Primers with Washes +20%
Stains with Washes +15%
Highlight +5%
Apply premiums to entire order in addition to any specie premiums(finish & wood premiums are cumulative).
61March 1, 2007
MISCELLANEOUS ACCESSORIESIE6140 Finish Materials
STAINQ (quart)* $ 72
STAING (gallon)* 132
FS (fil-stik loose) 12
MARKER (touch-up marker loose) 22
TOUCH(fil-stik & touch-up marker) 34
SPRAY(clear satin acrylic top coat spray) 22
*Chablis, Country Hearth, Fireside, Sandalwood & Woodridge each area two step prestain process and require spraying. You need bothprestain and stain, therefore, double the above price.
IE6150 Stain Sample Blocks
Per EachCBH Color Block Holder $ 153.00
HKDRW Drawer Box Sample Holder 153.00
SSOS Oak Sample 9.80
SSMS Maple Sample 9.80
SSCS Cherry Sample 9.80
SSHS Hickory Sample 9.80
SSAS Alder Sample 9.80
Refer to IDC Estate Cabinet Details for availability.Specify finish.
IE6160 Mini Base Sample
IMINI $ 393
Specify wood specie, finish & door style.
IE6170 FFA Door Sample
IFFA $ 136
IFFAF - Foil 136
Specify door style, wood specie & finish.
IE6180 DRA Door Sample
IDRA $ 78
IDRAF - Foil 91
Specify door style, finish, and wood specie.
62 March 1, 2007