TABLE OF CONTENTS
PRODUCT PAGE043-PWV-0800 70043-PWV-1000 70043-PWV-1200 70043-PWV-1400 70043-PWV-1600 70043-PWV-1800 70047-ACC-1001 73047-ACC-1002 73047-ASY-1000 18047-ASY-1000P 18047-KNH-1000 18047-PWV-0400 70047-PWV-0900 70047-PWV-1000 70047-PWV-1100 70047-PWV-1200 70047-PWV-1300 70047-VRT-1040 20050-KNH-0812 18050-KNH-0820 58050-PWV-0600 70050-PWV-0800 70050-PWV-1000 70050-PWV-1200 70050-PWV-1400 70050-PWV-1600 70050-PWV-1800 70070-RCH-0451 71070-RCH-0452 71070-RSP-0200A 71070-RSP-0210A 71070-RSP-0220A 71100-DRV-1010 72100-DRV-1020 72100-HAM-4000 73100-WDG-0700 72200-ASY-7511P 19200-BNC-3100 17200-DRV-1012 72200-DRV-1013 72200-DRV-1030 72200-GFO-0308 67200-HOE-1700 23200-KNF-0810 22200-KNF-0811 22200-KNF-0813 22200-KNF-0863 32200-KNF-7510 19200-KNF-7511 19200-KNF-7512 19200-KNF-7520 58200-KNF-7521 58
Company Profile 4 – 5
Performance Guarantee 6
Warranty 7
Speed-Loc™ Adapters 8 –13
Replaceable Tips 16 –17
Seeding Single-Shoot 18 – 23
Seeding Multi-Shoot 24 – 51
C-Shank 28 – 33
Edge-On 34 – 39
Drill Specific 40 – 51
Seed Boots 52 – 55
Fertilizer Knives 56 – 63
Tillage (Sweeps & Spikes) 64 –71
Accessories 72 –73
Reference 74 – 101
Product Depth Chart 74
Speed-Loc™ Replacement Parts 75
Assemblies 76
Speed-Loc™ Adapter Chart 94-95
Bolt Length Chart 96-98
Fastener Chart 99
Dealer List 100-101
Contact us 102
PRODUCT PAGE200-KNF-7524 58200-KNF-7525 58200-KNF-7542 20200-KNH-4000 23200-KNH-4010 19200-KNH-4020 58200-KNH-7501 21200-KNF-7530 58200-KNF-7531 58200-PWV-0400 66200-PWV-0405 67200-PWV-0428 67200-PWV-0528 67200-PWV-0500 66200-PWV-0508 66200-PWV-0700 66200-PWV-0708 66200-PWV-0738 67200-PWV-0900 66200-PWV-0908 66200-PWV-0928 67200-PWV-1000 66200-PWV-1008 66200-PWV-1100 66200-PWV-1108 66200-PWV-1200 66200-PWV-1208 66200-PWV-1300 66200-PWV-1308 66200-PWV-1400 66200-PWV-1408 66200-PWV-1608 66200-PWV-1808 66200-QAS-4711 72200-QAS-4712 72200-QCA-4700 10200-QCA-4710 10200-QCA-5000 10200-QCA-5010 11200-QCA-5020 11200-QCA-5030 11200-REL-1010 73200-SLC-1001 75200-SLC-1010 75200-SLC-1020 75200-SLC-1030 75200-SLC-1035 75200-SLC-1037 75200-SLC-1038 75200-SLC-1039 75200-SPK-0200 67200-SPK-0215 67
PRODUCT
QUICK REFERENCE GUIDE
GRANULAR
LIQUID
NH3
MAXQUIP NH3
LIQUID PHOSPHOROUS
FERTILIZER TYPES
PRODUCT PAGE200-SPK-0230 67200-SPN-0200 23200-SPN-0208 23200-SPN-0300 23200-SPN-0308 23200-TIP-0511 16200-TIP-0800 16200-TIP-0801 16200-TIP-0802 N-9200-TIP-0811 N-9200-TIP-1011 16200-TIP-2011 16200-TIP-3000 16200-TIP-3001 17200-TIP-3011 17200-TIP-4011 17200-VRT-1040 20200-WDG-0206 72200-WDG-0506 72200-WDG-1000 72200-WDG-1006 72300-ATM-1000 54300-ATM-1006 54300-ATM-1010 54300-ATM-1020 54300-ATM-1031 55300-ATM-1035 55300-ATM-1036 55300-BNC-4414 55300-BSH-1200 73300-BSH-1205 73300-HLD-4700 54300-HLD-4710 54300-HLD-5000 54300-HLD-5010 54300-SDS-4755 55300-SQR-1500 55300-SQR-1505 55400-DRV-1000 73400-DRV-1010 73400-WDG-0300 72400-WDG-0700 72410-HLD-7500 N-8410-KNF-0800 22410-KNF-0801 22410-KNF-0824 59410-KNF-0825 59410-KNF-0830 59410-KNF-0831 59410-KNF-7551 60410-KNF-7553 60410-KNH-7524 N-8
PRODUCT PAGE410-PWV-0400 68410-PWV-0418 69410-PWV-0518 69410-PWV-0600 68410-PWV-0608 68410-PWV-0800 68410-PWV-0808 68410-PWV-1000 68410-PWV-1008 68410-PWV-1200 68410-PWV-1208 68410-PWV-1400 68410-PWV-1408 68410-PWV-1600 68410-PWV-1608 68410-PWV-1800 68410-PWV-1808 68410-QCA-5000 12410-QCA-5010 12410-QCA-5020 13410-QCA-5050 13410-SLC-1001 75410-SLC-1022 75410-SLC-1030 75410-SPK-0200 69410-SPN-0300 23410-SPN-0308 23410-VRT-1000 22599-KNH-7540 21, 60600-BNC-5000 61600-HHA-0750 61600-KNH-7520 59600-KNH-7530 59600-KNH-7540 21, 60600-KNH-7552 60600-KNH-7562 32600-TIP-7500 61600-TIP-7501 61600-TIP-7507 61610-ASY-4020 30610-ASY-4026 30610-ASY-4081G N-2610-ASY-4081L N-5610-ASY-4081M N-5610-ASY4081N N-2610-TIP-4041 N-4610-TIP-4081 N-1612-ASY-0711 31612-ASY-0712 31612-ASY-0711L 31612-ASY-0712L 31612-ASY-0711P 31
PRODUCT PAGE612-ASY-0712P 31612-ASY-0711LP 31612-ASY-0712LP 31612-TIP-0711 N-5612-TIP-0712 N-5620-ASY-5010 33620-ASY-5015 33620-ASY-5020 33620-ASY-5020M 33628-ASY-5010 39628-ASY-5015 39628-ASY-5020 39628-ASY-5020M 39650-HLD-1000GL N-7650-HLD-1000G N-7650-HLD-1000L N-7650-HLD-1000N N-7675-ASY-1801GM 62675-ASY-1801GN 62680-ACC-0001 36, 73680-ACC-0002 36,72680-ACC-0003 36,73680-ACC-1000 73680-ASY-1000 18680-ASY-1000P 18680-ASY-4020 36680-ASY-4026 36682-ASY-0711 37682-ASY-0712 37682-ASY-0711L 37682-ASY-0712L 37682-ASY-0711P 37682-ASY-0712P 37682-ASY-0711LP 37682-ASY-0712LP 37682-ASY-2063 38682-ASY-2064 38682-ASY-2063P 38682-ASY-2064P 38682-ASY-2063M 38682-ASY-2064M 38682-ASY-2063MP 38682-ASY-2064MP 38683-ASY-4020G 42683-ASY-4020L 42683-ASY-4081G N-2683-ASY-4081L N-2683-ASY-4081M N-2683-ASY-4081N N-2683-ASY-0711G 43683-ASY-0712G 43683-ASY-0711L 43
PRODUCT PAGE683-ASY-0712L 43683-ASY-0711LP 43683-ASY-0712LP 43683-ASY-0711GP 43683-ASY-0712GP 43683-ASY-1000P 42683-KNH-1000 42684-ASY-4020G 48684-ASY-4020L 48684-ASY-0711G 49684-ASY-0712G 49684-ASY-0711L 49684-ASY-0712L 49684-ASY-0711LP 49684-ASY-0712LP 49684-ASY-0711GP 49684-ASY-0712GP 49684-ASY-1000P 48684-KNH-1000 48685-ASY-1801G 62685-ASY-1801GM 62685-ASY-1801GN 62685-ASY-1801L 62685-ASY-1801M 62685-ASY-1801N 62686-ASY-0711G 50686-ASY-0712G 50686-ASY-0711L 50686-ASY-0712L 50686-ASY-0711LP 50686-ASY-0712LP 50686-ASY-0711GP 50686-ASY-0712GP 50688-ASY-4020G 51688-ASY-4020L 51688-ASY-4081G N-3688-ASY-4081L N-3688-ASY-4081M N-3688-ASY-4081N N-3693-ASY-4020G 44693-ASY-4020L 44693-ASY-4081G N-3693-ASY-4081L N-3693-ASY-4081M N-3693-ASY-4081N N-3693-ASY-0711G 45693-ASY-0712G 45693-ASY-0711L 45693-ASY-0712L 45693-ASY-0711LP 45693-ASY-0712LP 45693-ASY-0711GP 45
PRODUCT PAGE693-ASY-0712GP 45693-ASY-1000P 44693-KNH-1000 44694-ASY-4020G 46694-ASY-4020L 46694-ASY-0711G 47694-ASY-0712G 47694-ASY-0711L 47694-ASY-0712L 47694-ASY-0711LP 47694-ASY-0712LP 47694-ASY-0711GP 47694-ASY-0712GP 47694-ASY-1000P 46694-KNH-1000 46880-ASY-1000 73880-BSH-1130 73880-BSH-1150 73880-CPL-2500 73880-HCL-0001 73880-HCL-0002 73880-ORF-0001 73880-WDG-0300 72880-WDG-0301 72
N-1
ADVANTAGE PLUS SERIES MULTI-SHOOT
40814"
PAIRED ROW
¾"
VERT.¾"HORZ.
SERIES SPECIFICATIONS
4" Paired Row with ¾" Horizontal and ¾” Vertical Seed/Fertilizer Separation.*
Fertilizer placement: Delivers Fertilizer 3/4” (19 mm) below the seedbed in a 3/4” (19 mm) wide band between two seed rows. Options of Granular, Liquid or Anhydrous Ammonia (NH3) Fertilizer. Carbide inserts on the underside of the tip ensures the fertilizer trench is sealed, eliminiating NH3 gassing. Also re-firms the seedbed.
Seed Placement: Seed is directed rearward into two distinctive 3.5” (89 mm) (center-center) seed rows onto a firm, moist, seedbed and 3/4” (19 mm) above the fertilizer band.
Replaceable tip: (610-TIP-4081) extra long carbide on the nose, narrow carbide on the cutting edges of the wings for excellent penetration.
Tube sizes: Designed for 1-1/4” (31 mm) OD hose. Bushing available for smaller hoses.
Packer Recommendation: 4” (101 mm) or wider.
*All measurements are approximate, measurements may vary with soil conditions and ground speed.
610-TIP-4081
REAR VIEW
NEW
3½"
4"
All measurements are approximate, measurements may vary with soil conditions and ground speed.
N-2
OPENER FITMENTC-SHANK
610-ASY-4081L
683-ASY-4081L
610-ASY-4081M
683-ASY-4081M
610-ASY-4081N
683-ASY-4081N
OPENER FITMENT
Morris Contour IDRILL SPECIFIC
610-ASY-4081G
683-ASY-4081G
ADVANTAGE PLUS SERIES MULTI-SHOOT
40814" ¾"
¾"PAIRED ROW VERT.
HORZ.
40814" ¾"
¾"PAIRED ROW
VERT.
HORZ.
NEW
N-3
ADVANTAGE PLUS SERIES MULTI-SHOOT
688-ASY-4081L
693-ASY-4081L
688-ASY-4081M
693-ASY-4081M
688-ASY-4081N
693-ASY-4081N
OPENER FITMENT
OPENER FITMENT
Horsch 84° Shank
Morris Contour II
DRILL SPECIFIC
DRILL SPECIFIC
688-ASY-4081G
693-ASY-4081G
40814" ¾"
¾"PAIRED ROW
VERT.
HORZ.
40814" ¾"
¾"PAIRED ROW
VERT.
HORZ.
NEW
N-4
SERIES SPECIFICATIONS4" Paired Row with ¾” Horizontal and NO Vertical Seed/Fertilizer separation.*
Seed Placement: Seed is directed rearward through an open bottom tip which quickly positions the seed into two distinctive seed rows 3 ½” (89 mm) apart onto a firm, unfractured and moist seedbed.
Fertilizer placement: Fertilizer is delivered on the same level as the seedbed in a 3/4” (19 mm) wide band between the two rows of seed. Options of Granular or Liquid Fertilizer.
Disturbance: Ultra-low draft, low disturbance and smoother fields.
Replaceable tip: (610-TIP-4041) Carbide on the nose with narrow carbide on the cutting edges of the wings for great penetration.
*All measurements are approximate, measurements may vary with soil conditions and ground speed.
Tube sizes: Designed for 1-1/4” (31 mm) OD hose. Bushing available for smaller hoses.
Packer Recommendation: 4” (101 mm) or wider.
610-TIP-4041
OPENER FITMENT DRILL SPECIFIC
MORRIS CONTOUR I 683-ASY-4020G 683-ASY-4020L
P. 42
MORRIS CONTOUR II 693-ASY-4020G 693-ASY-4020L
P. 44
CASE IH 700 NH P2060 FLEXI-COIL PH5500 694-ASY-4020G 694-ASY-4020L
P. 46
CASE IH 800 NH P2070 FLEXI-COIL PH5700 684-ASY-4020G 684-ASY-4020L
P. 48
HORSCH 84° SHANK 688-ASY-4020G 688-ASY-4020L
NEW P. 51
ADVANTAGE SERIES MULTI-SHOOT
REAR VIEW
3/4"
SEED
FERTILIZER
OPENER FITMENT C-SHANK
610-ASY-4020 P. 30
610-ASY-4026 P. 30
OPENER FITMENT EDGE-ON
680-ASY-4020 P. 36
680-ASY-4026 P. 36
40414" ¾"
PAIRED ROW NOVERTICAL
HORZ.
NEW
PAIRED ROW TIP 610-TIP-4041
Fits the Openers Below
3½"
4"
All measurements are approximate, measurements may vary with soil conditions and ground speed.
N-5
ADVANTAGE SERIES MULTI-SHOOT
SERIES SPECIFICATIONS
1½" Side Band with ¾” Horizontal and NO Vertical Seed/Fertilizer Separation.*
Seed Placement: Seed is delivered through an open back tip which quickly positions the seed into a 3/4” (19 mm) band onto a firm unfractured and mosit seedbed.
Fertilizer Placement: Fertilizer is delivered into a band of to the side (right or left). Product is place at the same level as the seedbed approximately 1-1/2” (38 mm) away from the seed band. Options of Granular or Liquid fertilizer.
Disturbance: Unique design of the tip provides low disturbance, low draft and smoother fields.
Replaceable Tips: Cast chrome body with carbide inserts on the nose of the tip for excellent penetration and wear resistance. Narrow carbide cutting edge on the wing for exceptional penetration.
Packer Recommendations: 2-1/4” (57mm) or wider.
*All measurements are approximate, measurements may vary with soil conditions and ground speed.
Note: See page N-6 for fitment
612-TIP-0711 LEFT WING
612-TIP-0712 RIGHT WING
0711
07121½" ¾"
SIDE BAND NOVERTICAL
HORZ.
REAR VIEW
1 1/2"3/4"
SEED
FERTILIZER
NEW
All measurements are approximate, measurements may vary with soil conditions and ground speed.
N-6
ADVANTAGE SERIES MULTI-SHOOT
OPENER FITMENT DRILL SPECIFIC
CASE IH 800 NH P2070
FLEXI-COIL PH5700684-ASY-0711G 684-ASY-0712G
P. 49
684-ASY-0711PGP 684-ASY-0712PGP
P. 49
684-ASY-0711L 684-ASY-0712L
P. 49
684-ASY-0711LP 684-ASY-0712LP
P. 49
OPENER FITMENT
DRILL SPECIFIC MORRIS CONTOUR I
683-ASY-0711G 683-ASY-0712G
P. 43
683-ASY-0711GP 683-ASY-0712GP
P. 43
683-ASY-0711L 683-ASY-0712L
P. 43
683-ASY-0711LP 683-ASY-0712LP
P. 43
OPENER FITMENT C-SHANK
612-ASY-0711 612-ASY-0712
P. 31
612-ASY-0711P 612-ASY-0712P
P. 31
612-ASY-0711L 612-ASY-0712L
P. 31
612-ASY-0711LP 612-ASY-0712LP
P. 31
OPENER FITMENT
DRILL SPECIFIC SEED HAWK
686-ASY-0711G 686-ASY-0712G
P. 50
686-ASY-0711GP 686-ASY-0712GP
P. 50
686-ASY-0711L 686-ASY-0712L
P. 50
686-ASY-0711LP 686-ASY-0712LP
P. 50
OPENER FITMENT
DRILL SPECIFIC MORRIS CONTOUR II
693-ASY-0711G 693-ASY-0712G
P. 45
693-ASY-0711GP 693-ASY-0712GP
P. 45
693-ASY-0711L 693-ASY-0712L
P. 45
693-ASY-0711LP 693-ASY-0712LP
P. 45
OPENER FITMENT EDGE-ON
682-ASY-0711 682-ASY-0712
P. 37
682-ASY-0711P 682-ASY-0712P
P. 37
682-ASY-0711L 682-ASY-0712L
P. 37
682-ASY-0711LP 682-ASY-0712LP
P. 37
OPENER FITMENT DRILL SPECIFIC
CASE IH 700 NH P2060
FLEXI-COIL PH5500694-ASY-0711G 694-ASY-0712G
P. 47
694-ASY-0711GP 694-ASY-0712GP
P. 47
694-ASY-0711L 694-ASY-0712L
P. 47
694-ASY-0711LP 694-ASY-0712LP
P. 47
SIDE BAND TIPS 612-TIP-0711 / 612-TIP-0712 Fits the Openers Below
NEW
N-7
FERTILIZER OPENER
OPENER FITMENT
John Deere 1870 Conserva Pak
DRILL SPECIFIC
650-HLD-1000N
650-HLD-1000G
650-HLD-1000L 650-HLD-1000GL
SERIES SPECIFICATIONS
Replacement Knife: Designed for the John Deere 1870 Air-Hoe Drill Conserva-Pak. Replaceable longer wearing high chrome carbide inserted tip. Body and fertilizer tube are narrower with adittional hard-surfacing. Designed for your choice of replacement carbide tips.
Tip Options: 200-TIP-0511, 200-TIP-0801200-TIP-0802, 200-TIP-0811
*Tips Sold Separately
Available in: Granular with optional tube inserts for Liquid and Anhydrous Ammonia (NH3). Also available with Granular and Liquid Fertilizer tube.
NEW
N-8
Speed Loc™
Speed Loc™
Speed Loc™
410-HLD-7500
410-KNH-7524
410-KNH-7540
SERIES SPECIFICATIONS
Fits: 410 Series Speed-Loc. This Knife is to be used in conjunction with the 300 Series Holders and Seed Boot System.
SERIES SPECIFICATIONS
Fits: 410 Series Speed-Loc. This Anhydrous Ammonia (NH3) knife holder is to be used on fertilizer units with the 410 Series Speed-Loc adapters. NH3 tube size is 1/2” (12 mm) O.D. and is designed to work with the cold-flow anhydrous units,
SERIES SPECIFICATIONS
Fits: 410 Series Speed-Loc. This Granular holder is to be used on fertilizer units with the 410 Series Speed-Loc adapters. Granular tube size is 1-1/4” (32 mm) O.D. This knife is designed to be used with the 600 Series Tips.
*Tip Sold Separately
*Tip Sold Separately
*Tip Sold Separately
FERTILIZER KNIVES
Tip: The knife is only available with a durable 3/4” (19 mm) tip, 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold seperatly). The tips are held on with a bolt and nut 600-BNC-5000.
Replaceable Tip: The knife is available with a durable 3/4” (19 mm) tip, 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold seperatly). The tips are held on with a bolt and nut 600-BNC-5000.
Replaceable Tip: The knife is available with a durable 3/4” (19 mm) tip, 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold seperatly). The tips are held on with a bolt and nut 600-BNC-5000.
NEW
N-9
0802¾" SINGLE
SHOOT TIP
0811
200-TIP-0802
Replaceable 3/4” (19 mm) Tip with Extra long Carbide on nose for High Abrasive Conditions. Similar angle as the 200-TIP-0801 Tip.
200-TIP-0811Replaceable 3/4” (19 mm) Vertical Tip with Extra long Carbide on nose for High Abrasive Conditions and Less distrubance. Similar angle as the 200-TIP-1011 Tip.
REPLACEMENT TIPS SINGLE-SHOOT
OPENER FITMENT C-SHANK
047-ASY-1000 P. 18
050-KNH-0812 P. 18
047-KNH-1000 P. 18
050-KNH-0820 P. 58
675-ASY-1801GM P. 62
675-ASY-1801GN P. 62
OPENER FITMENT EDGE-ON
680-ASY-1000 P.18
680-ASY-1000P P. 18
OPENER FITMENT Speed-Loc™
200-KNH-4010 P.19
200-KNH-4020 P. 58
OPENER FITMENT DRILL SPECIFIC
JOHN DEERE 1870 CONSERVA PAK™
650-HLD-1000G
650-HLD-1000L
650-HLD-1000GL
650-HLD-1000N
PAGE N-7
CASE IH 800 • NHP2070 • FLEXI-COIL PH5700
684-KNH-1000
684-ASY-1000PP. 48
MORRIS CONTOUR I
683-KNH-1000 683-ASY-1000P
P. 42
MORRIS CONTOUR II
693-KNH-1000
693-ASY-1000PP. 44
CASE IH 700 • NHP2060 FLEXI-COIL PH5500
694-KNH-1000
694-ASY-1000PP. 46
BOURGAULT 3310 AND 3320 PHD
685-ASY-1801G
685-ASY-1801L
685-ASY-1801M
685-ASY-1801GM
685-ASY-1801N
685-ASY-1801GN
P. 62
200-TIP-0811200-TIP-0802
NEW
SINGLE SHOOT TIP 200-TIP-0802 200-TIP-0811 Fits the Openers Below
We manufacture a broad range of ground-engaging tools for tillage, seeding and fertilizing. Our products fit most North American manufactured tillage and air seeding machines, as well as some European and Australian made equipment. See the application chart at the back of this catalogue for a list of the broad range of equipment we fit. Our line includes bolt-on products, as well as our patented Speed-Loc™ quick change system.
We understand the diversity of farming methods and we endeavor to build products to meet those needs. We believe that by listening to our customers and understanding their needs, we will continue to develop products that help our farming customers compete in this ever-challenging agricultural economy.
We respect and value the relationship we have with all whom we do business including our customers, dealers, distributors and suppliers. We strive to provide products that are of excellent value and high quality, and back this by our “Performance Guarantee.” We endeavor to provide sales and service people that are helpful and knowledgeable and to provide “Gold Standard” service and support.
We believe our employees are our most important asset. We encourage a work environment of mutual respect, regardless of one’s job or title. We believe in compensation systems that pay fair and competitive wages, while also rewarding extra efforts. Our Productivity Bonus system in our production areas rewards steady and consistent effort, and helps to keep production costs
down. Our company-wide Profit Share plan encourages all of our employees to work towards common goals. We encourage continued skills and personal development to help our people reach their goals, and in turn the company benefits from a higher skilled workforce.
Being a responsible corporate citizen is very important to us at Bourgault Tillage Tools. We believe that everyone has a responsibility to help build a world that is sustainable, and we endeavor to operate our business in that way. One example of this is our participation in the “green power” program offered by our electrical supplier. Our plan is to continue increasing the purchase of cleaner source energy in order to help clean up our air and environment. We are also moving to cleaner production processes within our plant to ensure minimum pollution to the environment. In tune with our principles of sustainability, we support agricultural practices that will leave the land and the environment healthy and intact for future generations.
As we expand globally, we are excited by the challenge to supply our tillage and seeding tools to agricultural markets around the world, and at the same time remain committed to maintaining a strong connection with our domestic and local markets. By understanding “the company behind the product and the principles behind the company,” we hope that you will be comfortable in dealing with us now and into the future.
Sincerely,
Board of Directors and All Company AssociatesF. P. Bourgault Tillage Tools Ltd.
The Company behind the Product,The Principles behind the Company.
4
Leadership through ExperienceWe do our best to lead and manage our company based on a clear vision, mission, core values and principles. We agree on the direction that we choose to travel to create a brighter future for our business and a healthier, happier and more prosperous future for our farm customers, dealers, distributors, suppliers and as well as for our company associates.
More than 25 years ago, from our own expertise in tillage and seeding equipment and from our own farming and hands-on field experience, we realized that any tillage or seeding unit was only as good as the tillage and seeding tool openers being used on that machine. In the early and mid 1980s, we recognized the serious problems and limitations with the existing tillage and seeding tool openers. We realized that leadership and innovation was sorely lacking in the research and development of tillage and seeding tools.
Beginning with the innovations of the parallel wing sweep and the quick change knife tips, for more than 25 years Bourgault Tillage Tools has been providing leadership and innovations in the tillage and seeding tools industry. Today, we continue to innovate in order to provide you, our farm customer, with the most innovative and highest quality tillage and seeding tools, and we look forward to continue serving you into the future.
Joseph L. BourgaultPresident
5
PERFORMANCEGUARANTEE
Bourgault Tillage Tools guarantees the product you purchase will perform to its designed specification under normal conditions.
If the product does not perform its designed task within the first season of use, please inform us of the issue immediately and grant us the opportunity to visit your field to assess the situation. If we cannot rectify the situation, we will guarantee you a 100% refund.
6
Trip Strength ConsiderationsAt Bourgault Tillage Tools, we build products that last. Our seed openers need to perform in some challenging conditions, and we design our products with durability in mind. The end user has the responsibility to make sure the machine is best suited to the operating conditions. Trip strength is an important consideration. When it comes to trips, heavier is not necessarily better! Buying a seeding machine with heavier trips than required for proper penetration may result in:
• Broken or damaged seed openers• Broken or bent shanks • More rocks being pulled to the surface
Proper trip strength will save you time and money. When determining the appropriate trip strength, some factors to consider are: soil type, amount of rock and type of seed opener used. Some people believe a heavy trip is a “one size fits all” scenario. This is simply not true. Take the time and make sure you get a machine with appropriate trip strength for your farming operation.
Bourgault Tillage Tools reserves the right to limit warranty claims on trip strengths greater than 400 pounds.
Warranty is limited to the replacement of the failed part and does not cover any consequential damages. To obtain warranty, the part must be returned to the dealer. The dealer will complete the Warranty Claim Form.
All products are warranted from the date of purchase as follows:
• 1st year prorated to a maximum of 100%• 2nd year prorated to a maximum of 70%• 3rd year prorated to a maximum of 40%
Carbide is warranted for loss only. Chipping of carbide is normal. If the brazing fails and the carbide falls off, return the part to the dealer.
WARRANTYTERMS
7
8
Speed-Loc™
The Speed-Loc™ system provides more benefits than any other system!
Consistent depth control: The upper stop on the Speed-Loc™ adapters ensures that your tillage or seeding tools are always running at the same depth.
Peace of mind: The spring-loaded locking pin ensures that the tools will stay securely in place in all conditions, and we back that up with a 100% guarantee.
Years of trouble-free operation: The Speed-Loc™ adapters are designed with durability in mind. The cast adapters are heat-treated for increased strength and wear resistance.
9
10
47°• Fits all Bourgault and
Ezee-On field cultivators, air seeders and air drills.
• 1-3/4" (45 mm) centre to centre.
• 1/2" (12 mm) hex head bolts.
47°• Fits field cultivators
with 47° shanks, except Bourgault and Ezee-On.
• 1-3/4" (45 mm) centre to centre.
• Oversize head plow bolts.
50°• Fits Bourgault and Morris
Concept 2000.
• Not recommended for primary tillage use, only for seeding.
• 2-1/4" (57 mm) centre to centre.
• 1/2" (12 mm) hex head bolts.
200 SERIESQUICK CHANGE ADAPTERS
200-QCA-4700 200-QCA-4710 200-QCA-5000
11
50°• Fits air drills with
50° shanks.
• Not recommended for heavy deep tillage.
• 2-1/4" (57 mm) centre to centre.
• 1/2" (12 mm) plow bolts.
• Can also be used on a 43° shank with the addition of a 7° wedge (100-WDG-0700).
50°• Fits European built tillage
and seeding implements.
• 63 mm to 80 mm centre to centre.
• M12-DIN608 10.9 plow bolts.
50°• Fits Horsch shanks.
• 57 mm centre to centre.
• M12-DIN608 10.9 plow bolts.
Speed-Loc ///
200-QCA-5010 200-QCA-5020 200-QCA-5030
Not sure which adapter is for you or which bolts you need?
Refer to our Speed-Loc™ adapter chart on pages 94-95. For a complete list of bolt lengths, see pages 96-98.
For Speed-Loc™ adapter replacement parts, refer to page 75.
12
50°• Fits Bourgault and Morris Magnum chisel
plows, and Morris Concept 2000 with the LH755 shank.
• 2-1/4" (57 mm) centre to centre.
• 1/2" (12 mm) hex head bolts.
50°• Fits all 50° chisel plows except the Bourgault
and Morris units identified for use with the 410-QCA-5000.
• 1-3/4" to 3" (45 mm to 77 mm) centre to centre.
• 1/2" (12 mm) hex head bolts.
410 SERIESQUICK CHANGE ADAPTERS
410-QCA-5000 410-QCA-5010
On a Bourgault four-hole shank, the centre hole of the adapter should be plugged to protect the spring ball from NH3 gases when used as a NH3 applicator.
In rocky or abrasive conditions, the bottom nut may experience excessive wear or damage. This problem is alleviated by placing the bottom bolt in from the back of the shank and putting the nut in the front of the adapter.
This adapter can be used on a 43° shank by adding a 7° plastic wedge (400-WDG-0700).
Special note for John Deere: certain chisel plow models including the 685, 1810, 1820 and 2400 may need a 3° wedge to attain proper sweep pitch. See pages 72–73 for more information.
Shanks with the open bottom bolt hole require the 047-ACC-1002 to keep the bottom bolt in place.
13
50°• Fits Kverneland
(CLD Grubber) shanks.
• 45 mm centre to centre.
• M12-DIN608 10.9 plow bolts.
50°• Fits Lemken shanks.
• 45 mm centre to centre.
• M12-DIN608 10.9 plow bolts.
410-QCA-5020 410-QCA-5050
Not sure which adapter is for you or which bolts you need?
Refer to our Speed-Loc™ adapter chart on pages 94-95. For a complete list of bolt lengths, see pages 96-98.
For Speed-Loc™ adapter replacement parts, refer to page 75.
Speed-Loc ///
14
SINGLE-SHOOT OPENERSBourgault Tillage Tools has been providing producers all around the world with industry-leading quality and innovation in single-shoot seeding technology. You can trust in the quality that our products stand for.
200 Series Speed-Loc™
410 Series Speed-Loc™
47° and 50° C-Shank
47° C-Shank
Liquid Phosphorus
15
16
REPLACEMENT TIPSLONG-WEARING HIGH-CHROME TIPS
200-TIP-2011200-TIP-1011
200-TIP-0801
Carbide Tip1/2" (12.7 mm) with carbide insert on the nose
Chrome Spread Tip3" (76 mm)
Vertical Tip1" (25 mm) with double carbide insert
Chrome Tip3/4" (19 mm)
Carbide Tip3/4" (19 mm) with carbide insert on the nose
Spread Tip2" (50 mm) with carbide insert on the nose and underside of the wings
200-TIP-0511
200-TIP-3000
200-TIP-0800
17
SINGLE-SHOOT ///
200-TIP-3011 200-TIP-4011200-TIP-3001
Spread Tip4" (101 mm) with carbide insert on the nose and underside of the wings
Spread Tip3" (76 mm) with carbide insert on the nose and hard facing on the underside of the wings
Spread Tip3" (76 mm) with carbide insert on the nose and underside of the wings
All tips on these pages (except 200-TIP-0511) are compatible with Flexi-Coil Stealth openers.
200-NUT-3101
200-BLT-3102200-BNC-3100
Bolt and Nut ComboThis bolt and nut combination is used to secure Category 1 tips, Titan 1/2" tips and Advantage Series tips. It is important not to over tighten the bolt when installing the tips. The bolt has a strip of lock-tight applied to the threads, so it needs only to be turned in by hand until the shoulder of the bolt makes contact with the nut.
Over torquing with a power drill will result in difficulty when removing. Recommended to torque to 84 in/lbs or 7 ft/lbs.
NUT & BOLT COMBINATION
18
Fits 47° and 50° C-Shank• Seed is delivered through the precision funnel opening.
• Front delivery provides precise seed delivery and reduces plugging with better soil flow.
• Can be used with any of the replaceable tips (sold separately) allowing you to choose the tip for your conditions.
• Extra hard surfacing on critical wear areas to increase the life of the holder.
• Also available with a phosphorous tube add-on (047-ASY-1000P).
• When installing on a Bourgault with MRBs, use 047-KNH-1000 directly behind the MRBs.
Fits 47° and 50° C-Shank• Can be used with any of the replaceable tips (sold separately) allowing you
to choose the tip for your conditions.
• Rear delivery provides additional trash clearance.
• Slotted bolt holes provide the ability to fit many different makes and models.
Fits Edge-On Shank, Bourgault, PHD, Morris, Concord• Seed is delivered through the precision funnel
opening.
• Front delivery provides precise seed delivery and reduces plugging with better soil flow.
• Can be used with any of the replaceable tips (sold separately) allowing you to choose the tip for your conditions.
• Reinforced holder reduces breakage in rocky conditions.
• Extra hard surfacing on critical wear areas to increase the life of the holder.
• Also available with a phosphorous tube add-on (680-ASY-1000P).
SINGLE-SHOOT OPENERS
047-ASY-1000 047-KNH-1000
680-ASY-1000
050-KNH-0812
680-ASY-1000P
19
Fits 200 Series Speed-Loc™• Can be used with any of the replaceable tips (sold separately) allowing you
to choose the tip for your conditions.
• Works with Bourgault or Flexi-Coil square tube seed boot.
• Rear delivery provides additional trash clearance.
Fits 200 Series Speed-Loc™• Precise seed placement due to the funnel being close to the tip and to the
bottom of the furrow.
• Reinforced funnel with hard surfacing for longer wear life.
• Funnel fits Bourgault and Flexi-Coil square tube seed boots.
• Choose between 3/4" weld-on carbide or non-carbide tips.
• The carbide opener is also available with a phosphorous tube add-on (200-ASY-7511P).
Fits 200 Series Speed-Loc™• Excellent plug resistance due to step located behind the tip.
• The funnel is reinforced with hard surfacing for longer wear life.
• Funnel fits Bourgault and Flexi-Coil square tube seed boots.
• 3/4" weld-on carbide tip for prolonged tip life and better soil penetration.
200-KNH-4010
200-KNF-7510 200-KNF-7511
200-KNF-7512
200-ASY-7511P
SINGLE-SHOOT ///
20
SINGLE-SHOOT OPENERS
Fits 200 Series Speed-Loc™• Perfect for heavy gumbo soils, extra space between the tip and the tube
reduces plugging.
• High-chrome tip is long-lasting and provides great penetration.
• High-value opener when you are seeding into low abrasive soils or heavy gumbo.
Fits 200 Series Speed-Loc™• 1" weld-on tip with extra carbide for long-lasting wear life.
• Fits any 200 Series Speed-Loc™ adapter.
• Vertical approach reduces rock pulling and soil throw.
Fits 47° C-Shank• 1" weld-on tip with extra carbide for long-lasting wear life.
• Fits any 200 Series Speed-Loc™ adapter.
• Vertical approach reduces rock pulling and soil throw.
• Fits 1-3/4" bolt hole spacing.
200-KNF-7542
200-VRT-1040
047-VRT-1040
21
Fits 47° and 50° C-Shank• Choose between long-wearing carbide or chrome tip.
• The larger tip provides extra long wear and decreases wear on the holder.
• Slotted bolt hole spacing give this opener flexibility.
• Fits 1-3/4" or 2-1/2" bolt hole spacing.
Fits 47° C-Shank• This opener is the same as above except that it is designed to have a better
fit on the Bourgault shank.
Fits 200 Series Speed-Loc™• This opener is used in conjunction with the Technotill system.
• Fits any 200 Series Speed-Loc™ adapter.
• The high-chrome tip with a carbide insert provides additional wear life.
600-KNH-7540
599-KNH-7540
200-KNH-7501
For replacement tip options, see page 61.
For replacement tip options, see page 61.
SINGLE-SHOOT ///
22
SINGLE-SHOOT OPENERS
Fits 200 Series Speed-Loc™• Use in conjunction with the 300 Series Seed Boot System on pages 54 and 55.
Designed to work with the 300-ATM-1035.
• 3/4" weld-on tip, comes with or without carbide.
• Fits any 200 Series Speed-Loc™ adapter.
• This low disturbance opener is low in draft and easy pulling.
Fits 200 Series Speed-Loc™• Use in conjunction with the 300 Series Seed Boot System on pages 54 and 55.
Designed to work with the 300-ATM-1035.
• 3/4" weld-on tip with extra carbide for long-lasting wear life.
• Fits any 200 Series Speed-Loc™ adapter.
• Vertical approach reduces rock pulling.
Fits 410 Series Speed-Loc™• Use in conjunction with the 300 Series Seed Boot System on pages 54 and 55.
Designed to work with the 300-ATM-1031.
• 3/4" weld-on tip, comes with or without carbide.
• Fits any 410 Series Speed-Loc™ adapter.
• This low disturbance opener is low draft and easy pulling.
Fits 410 Series Speed-Loc™• Use in conjunction with the 300 Series Seed Boot System on pages 54 and 55.
Designed to work with the 300-ATM-1031.
• 1" weld-on tip with extra carbide for long-lasting wear life.
• Fits any 410 Series Speed-Loc™ adapter.
• Vertical approach reduces rock pulling.
200-KNF-0810 200-KNF-0811
200-KNF-0813
410-KNF-0800 410-KNF-0801
410-VRT-1000
23
Fits 200 Series Speed-Loc™• Use in conjunction with the 300 Series Seed Boot System on pages 54 and 55.
Designed to work with the 300-ATM-1035.
• Can be used with any of the replaceable tips (sold separately) allowing you to choose the tip for your conditions.
• Our extensive tip options allow you to choose the tip that is right for you.
• Fits any 200 Series Speed-Loc™ adapter.
Fits 200 Series Speed-Loc™• Provides 1-1/2" to 1-3/4" seed spread. Works best with a 1" single tube seed boot.
• Long-wearing high-chrome tip.
• Runs through the ground at a fairly vertical angle for less rock pulling.
• Very dependable in many different conditions.
Fits 200 Series Speed-Loc™• 2" spread (200-SPN-0200 or 200-SPN-0208) or 3" spread (200-SPN-0300 or
200-SPN-0308).
• A larger spread allows for nitrogen fertilizer to be placed with the seed.
• Choose from 1/4" (200-SPN-0200 or 200-SPN-0300) material or 5/16" (200-SPN-0208 or 200-SPN-0308) for increased wear life.
• Designed to fit any 200 Series adapter.
Fits 410 Series Speed-Loc™• 3" spread (410-SPN-0300 or 410-SPN-0308).
• A larger spread allows for nitrogen fertilizer to be placed with the seed.
• Choose from 1/4" (410-SPN-0300) material or 5/16" (410-SPN-0308) for increased wear life.
• Designed to fit any 410 Series adapter.
200-KNH-4000
200-HOE-1700
410-SPN-0300 410-SPN-0308
200-SPN-0200 200-SPN-0208 200-SPN-0300 200-SPN-0308
SINGLE-SHOOT ///
24
MULTI-SHOOT OPENERSThe quality and seed placement you trust now comes with a dose of fertilizer. Choose from our extensive line of bolt-on and Speed-Loc™ openers for any seeding application.
C-ShankPAGE PAGE PAGE
28 34 40Edge-On Drill Specific
GRANULAR LIQUID MAXQUIP NH3NH3 LIQUID
PHOSPHOROUS
FERTILIZER TYPES
25
26
With the development and increased use of multi-shoot knives for one-pass seed and fertilizer placement, the following question is often asked:
“How much fertilizer can I place with the seed without causing germination problems or seedling damage?”
The answer to this question is very complex.
Precautions and Risk Factors*Consider these factors when using any products between pages 30 to 51.
FERTILIZER SOURCE – depending on the type of fertilizer used, damage can occur either through ammonia toxicity or salt effects or a combination of both as in the case with blended fertilizer.
FERTILIZER RATES – typically, the risk of crop seedling injury increases with higher rates of fertilizer.
CROP TYPE – crops vary in their ability to tolerate seed-placed fertilizer, with cereals being able to withstand more than oilseeds and pulses falling somewhere in between.
SEED QUALITY – with everything else equal, seed with poor vigor will suffer more damage from seed-placed fertilizer than seeds with high vigor. If seed vigor is questionable, have it tested.
SOIL MOISTURE – with soil at or near saturation point, the toxic effects of fertilizer are diluted so seeds can germinate and develop with few problems. If conditions are very dry, reduce the amount of fertilizer placed near the seed.
SOIL TEXTURE – fine textured soils such as clay or clay loam tend to also reduce these toxic effects over coarse or sandy soils because of their ability to hold more water and absorb toxic free ammonia.
ORGANIC MATTER – higher levels of organic matter (OM) in a soil also lessen the risk of damage. For example, reduced levels of OM on dry, eroded hilltops seedlings are more prone to injury.
SEEDBED UTILIZATION – or SBU is the proportion of the seedbed used for seed and fertilizer placement. Ex: 2" openers on 10" row spacing have a SBU of 20%. As SBU increases, the crops tolerance to higher rates of seed-placed fertilizer increases.
SEEDING DEPTH, PACKING AND SPEED – these points are also factors to take into consideration as they may compromise seed and fertilizer placement as well as the overall quality of the seeding operation.
ADVERSE SEEDING CONDITIONS – excessively wet or dry soil at time of seeding can cause erratic seed placement, poor seed-to-soil contact and poor separation, which will also affect the amounts of seed placed fertilizer you can apply.
If any of the above conditions are less than ideal, it is advisable to reduce your fertilizer rate accordingly.
!
MULTI-SHOOT OPENERS
*It is our company’s policy not to recommend or endorse specific “safe” rates of fertilizer for multi-shoot openers due to the wide variance in the PRECAUTIONS AND RISK FACTORS listed above. Most of our knives are tested at independent research facilities to verify only the placement of seed and fertilizer. We suggest that producers consult their local agronomist to establish acceptable fertilizer rates for their unique seeding conditions.
27
Side Band The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.
Side Band (Triple-Shoot) The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing. Liquid phosphorous is added to the seed row.
Single-Shoot The seed is placed directly behind the tip in the middle of the row. For single-shoot seeding, choose from a variety of tips on pages 16 and 17.
OPENER TYPES
Titan Series
Original Liquid Series
SEED
FERTILIZER1/2" 3/4"
3/4"
Advantage Series
1 1/2"3/4"
SEEDFERTILIZER
1-1/2"
Advantage Series
1 1/2"3/4"SEEDFERTILIZER
LIQUID PHOSPHOROUS
3½"
Paired Row The seed is delivered in two distinct rows while the fertilizer is placed in the centre.
Advantage Plus Series3½"
¾"
Advantage Series3½"
¾"
¾"
C-SHANK
28
29
FIND YOUR OPENERAdvantage SeriesHorizontal Seed/Fertilizer Separation
Side Band Paired Row
612-ASY-0711 612-ASY-0711
PAGE 31
610-ASY-4020
PAGE 30
612-ASY-0711P 612-ASY-0712P
PAGE 31
612-ASY-0711L 612-ASY-0712L
PAGE 31
610-ASY-4026
PAGE 30
612-ASY-0711LP 612-ASY-0712LP
PAGE 31
600-KNH-7562 200-KNF-0863
PAGE 32
Original Liquid SeriesHorizontal Seed/Fertilizer Separation
Side Band
200-KNF-0863
PAGE 32
600-KNH-7562
PAGE 32
Advantage Plus SeriesHorizontal and Vertical Seed/Fertilizer Separation
Paired Row
610-ASY-4081G
PAGE N-2
610-ASY-4081L
PAGE N-2
610-ASY-4081M
PAGE N-2
610-ASY-4081N
PAGE N-2
Titan SeriesHorizontal and Vertical Seed/Fertilizer Separation
Single Row Paired Row
620-ASY-5015
PAGE 33
620-ASY-5010
PAGE 33
620-ASY-5020
PAGE 33
620-ASY-5020M
PAGE 33
30
Double-Shoot LiquidFits 47° and 50° C-Shank
Double-Shoot GranularFits 47° and 50° C-Shank
PAIRED ROW /// C-SHANK
ADVANTAGE SERIESHORIZONTAL SEED / FERTILIZER SEPARATION
610-ASY-4020 610-ASY-4026
• Fertilizer is placed down the middle of the row and on the same plane as the seed. The seed is placed in two distinct rows measuring 3" centre to centre.
• The 4" Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• Tests have shown our Paired Row Advantage to be the industry leader in low draft and soil disturbance.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
31
Double-Shoot GranularFits 47° and 50° C-Shank
• Triple-Shoot Liquid Phosphorus Openers: 612-ASY-0711P, 612-ASY-0712P
SIDE BAND /// C-SHANK
612-ASY-0711 (left) 612-ASY-0712 (right) Shown Above
Double-Shoot LiquidFits 47° and 50° C-Shank
• Quick change liquid insert provides easy switching from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 612-ASY-0711LP, 612-ASY-0712LP
612-ASY-0711L (left) 612-ASY-0712L (right) Shown Above
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide-enforced chrome tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
612-ASY-0711P 612-ASY-0712P 612-ASY-0711LP 612-ASY-0712LP
OPTIONAL P TUBE
MULTI-SHOOT ///
32
Double-Shoot LiquidFits 200 Series Speed-Loc™ Adapters
• This is the only Speed-Loc™ multi-shoot opener that we carry. It provides all the benefits of the Speed-Loc™ system with the seed placement that you trust.
Double-Shoot LiquidFits 47° and 50° C-Shank
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
ORIGINAL LIQUID SERIESHORIZONTAL SEED / FERTILIZER SEPARATION
SIDE BAND /// C-SHANK
600-KNH-7562 200-KNF-0863
• These unique side band openers provide good horizontal separation with slight vertical fertilizer separation.
• The high-chrome tip is protected with a carbide insert on the nose and a solid carbide wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• The opener works very well when used with a pressurized liquid system.
For replacement tip, see page 61.
600-TIP-7507
33
/// C-SHANK
TITAN SERIESHORIZONTAL & VERTICAL SEED / FERTILIZER SEPARATION
Paired Row GranularFits 47° and 50° C-Shank
Paired Row NH3
Fits 47° and 50° C-Shank
Single Row GranularFits 47° and 50° C-Shank
Paired Row NH3 MaxquipFits 47° and 50° C-Shank
620-ASY-5010
620-ASY-5020 620-ASY-5020M
620-ASY-5015
• The Titan provides true vertical separation between seed and fertilizer. It also provides more centre-to-centre horizontal separation than our Advantage Series openers.
• 1/2" wide fertilizer knife for lower disturbance and more precise fertilizer placement.
• Adjustable front knife allows you to set the depth of the fertilizer from 3/4" to 1-1/2".
• Three strategic carbide locations for additional wear life. Hard facing is placed on key wear points that don’t have carbide.
• The modular design allows for replacement of worn parts instead of the entire opener.
• The Titan has been tested to show superior performance when compared to other paired row openers.
• Adjustable based on seed and fertilizer placement needs.
Note: Also available in Liquid 620-ASY-5010L
EDGE-ON
34
35
FIND YOUR OPENER
Advantage SeriesHorizontal Seed/Fertilizer Separation
Side Band Paired Row
682-ASY-0711 682-ASY-0712
PAGE 37
680-ASY-4020
PAGE 36
682-ASY-0711P 682-ASY-0712P
PAGE 37
682-ASY-0711L 682-ASY-0712L
PAGE 37
682-ASY-2063 682-ASY-2064
PAGE 38
680-ASY-4026
PAGE 36
682-ASY-0711LP 682-ASY-0712LP
PAGE 37
682-ASY-2063P 682-ASY-2064P
PAGE 38
Titan SeriesHorizontal and Vertical Seed/Fertilizer Separation
Single Row Paired Row
628-ASY-5015
PAGE 39
628-ASY-5010
PAGE 39
628-ASY-5020
PAGE 39
628-ASY-5020M
PAGE 39
682-ASY-2063M 682-ASY-2064M
PAGE 38
682-ASY-2063MP 682-ASY-2064MP
PAGE 38
36
Double-Shoot LiquidFits Edge-On Shank, Bourgault PHD (except XTC), Concord,* Morris
Double-Shoot GranularFits Edge-On Shank, Bourgault PHD (except XTC), Concord,* Morris
ADVANTAGE SERIESHORIZONTAL SEED / FERTILIZER SEPARATION
PAIRED ROWPAIRED ROW /// EDGE-ON
680-ASY-4020
680-ACC-0003 680-ACC-0002
680-ASY-4026
• Fertilizer is placed down the middle of the row and on the same plane as the seed. The seed is placed in two distinct rows measuring 3" centre to centre.
• The 4" Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Order 680-ACC-0003 if installing the 680-ASY-4020 on a Bourgault.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• Tests have shown our Paired Row Advantage to be the industry leader in low draft and soil disturbance.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
• Order 680-ACC-0002 if installing the 680-ASY-4026 on a Bourgault.
* Make sure to order 680-ACC-0001 when installing on a Concord (see page 73).
37
Double-Shoot GranularFits Edge-On Shank, Bourgault PHD (except XTC), Concord,* Morris
• Triple-Shoot Liquid Phosphorus Openers: 682-ASY-0711P, 682-ASY-0712P
SIDE BANDSIDE BAND /// EDGE-ON
682-ASY-0711 (left)682-ASY-0712 (right) Shown Above
Double-Shoot LiquidFits Edge-On Shank, Bourgault PHD (except XTC), Concord,* Morris
• Quick change liquid insert provides easy switching from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 682-ASY-0711LP, 682-ASY-0712LP
682-ASY-0711L (left)682-ASY-0712L (right) Shown Above
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide-enforced chrome tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
682-ASY-0711P 682-ASY-0712P 682-ASY-0711LP 682-ASY-0712LP
MULTI-SHOOT ///
OPTIONAL P TUBE
38
Double-Shoot LiquidFits Edge-On Shank, Bourgault PHD, Concord,* Morris
Double-Shoot NH3 MaxquipFits Edge-On Shank, Bourgault PHD, Concord,* Morris
• Outfitted with a Maxquip tube that is inserted into the 1/4" stainless steel liquid tube.
Triple-Shoot LiquidFits Edge-On Shank, Bourgault PHD, Concord,* Morris
• Use to add liquid phosphorus to the seed row.
Triple-Shoot NH3 MaxquipFits Edge-On Shank, Bourgault PHD, Concord,* Morris
• Fitted with a 1/4" stainless steel tube that applies liquid phosphorus down the centre of the seed row.
ADVANTAGE SERIESHORIZONTAL SEED / FERTILIZER SEPARATION
SIDE BAND /// EDGE-ON
682-ASY-2063 (left) Shown682-ASY-2064 (right)
682-ASY-2063M (left) Shown682-ASY-2064M (right)
682-ASY-2063MP (left) Shown682-ASY-2064MP (right)
682-ASY-2063P (left) Shown682-ASY-2064P (right)
• The 2-1/4" Side Band tip provides you with low draft and soil disturbance while ensuring great seed placement.
• Long-wearing carbide-enforced chrome tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• The welded liquid tube is protected by the carbide tip and runs along the front of the opener to prevent plugging.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
* Make sure to order 680-ACC-0001 when installing on a Concord (see page 73).
39
TITAN SERIESHORIZONTAL & VERTICAL SEED / FERTILIZER SEPARATION
/// EDGE-ON
628-ASY-5010 628-ASY-5015
628-ASY-5020 628-ASY-5020M
Paired Row GranularFits Edge-On Shank, Morris
Paired Row NH3
Fits Edge-On Shank, Morris
Single Row GranularFits Edge-On Shank, Morris
• Not recommended for North America.
Paired Row NH3 MaxquipFits Edge-On Shank, Morris
• The Titan provides true vertical separation between seed and fertilizer. It also provides more centre-to-centre horizontal separation than our Advantage Series openers.
• 1/2" wide fertilizer knife for lower disturbance and more precise fertilizer placement.
• Adjustable front knife allows you to set the depth of the fertilizer from 3/4" to 1-1/2".
Note: Also available in Liquid 628-ASY-5010L
• Three strategic carbide locations for additional wear life. Hard facing is placed on key wear points that don’t have carbide.
• The modular design allows for replacement of worn parts instead of the entire opener.
• The Titan has been tested to show superior performance when compared to other paired row openers.
DRILL SPECIFIC
As the direct seeding industry evolves, unique shank styles are being developed by air drill manufacturers. Bourgault Tillage Tools is dedicated to building openers that fit these new shanks. You can now be assured the quality you have come to trust in our openers will be available on your choice of air drills.
Advantage Series Benefits
• Ultra-Low Draft• Minimal Seedbed Fracturing• Less Soil Disturbance• Carbide on Tip and Wings• Replaceable Tip
• Virtually No Plugging• Smoother Field Finish• Even Germination• Seed and Fertilizer Separation
40
41
FIND YOUR OPENERAdvantage Series
Advantage Plus Fertilizer Opener
Horizontal Seed/Fertilizer Separation
Horizontal and Vertical Seed/Fertilizer Separation
Side Band
Paired Row JOHN DEERE 1870 CONSERVA PACK™
Paired RowSingle Row
MORRIS CONTOUR I
MORRIS CONTOUR I
MORRIS CONTOUR II
HORSCH 84° SHANK
MORRIS CONTOUR II
CASE IH 700 NH P2060 FLEXI-COIL PH5500
CASE IH 800 NH P2070 FLEXI-COIL PH5700
SEED HAWK
HORSCH 84° SHANK
683-ASY-0711LP 683-ASY-0712LP
PAGE 43
683-ASY-0711L 683-ASY-0712L
PAGE 43
683-ASY-4081L PAGE N-2
650-HLD-1000GL PAGE N-7
693-ASY-4081L PAGE N-3
688-ASY-4081L PAGE N-3
683-ASY-4081M PAGE N-2
650-HLD-1000L PAGE N-7
693-ASY-4081M PAGE N-3
688-ASY-4081M PAGE N-3
683-ASY-4081N PAGE N-2
650-HLD-1000N PAGE N-7
693-ASY-4081N PAGE N-3
688-ASY-4081N PAGE N-3
693-ASY-0711L 693-ASY-0712L
PAGE 45
693-ASY-0711LP 693-ASY-0712LP
PAGE 45
694-ASY-0711L 694-ASY-0712L
PAGE 47
694-ASY-0711LP 694-ASY-0712LP
PAGE 47
686-ASY-0711L 686-ASY-0712L
PAGE 50
686-ASY-0711LP 686-ASY-0712LP
PAGE 50
N/A N/A
684-ASY-0711L 684-ASY-0712L
PAGE 49
684-ASY-0711LP 684-ASY-0712LP
PAGE 49
683-ASY-0711GP 683-ASY-0712GP
PAGE 43
683-ASY-0711G 683-ASY-0712G
PAGE 43
683-ASY-4081G PAGE N-2
650-HLD-1000G PAGE N-7
693-ASY-4081G PAGE N-3
688-ASY-4081G PAGE N-3
693-ASY-0711GP 693-ASY-0712GP
PAGE 45
693-ASY-0711G 693-ASY-0712G
PAGE 45
694-ASY-0711GP 694-ASY-0712GP
PAGE 47
694-ASY-0711G 694-ASY-0712G
PAGE 47
686-ASY-0711GP 686-ASY-0712GP
PAGE 50
686-ASY-0711G 686-ASY-0712G
PAGE 50
N/AN/A
684-ASY-0711GP 684-ASY-0712GP
PAGE 49
684-ASY-0711G 684-ASY-0712G
PAGE 49
683-KNH-1000 683-ASY-1000P
PAGE 42
693-KNH-1000 693-ASY-1000P
PAGE 44
694-KNH-1000 694-ASY-1000P
PAGE 46
N/A
N/A
684-KNH-1000 684-ASY-1000P
PAGE 48
683-ASY-4020G PAGE 42
693-ASY-4020G PAGE 44
694-ASY-4020G PAGE 46
N/A
688-ASY-4020G PAGE 51
684-ASY-4020G PAGE 48
683-ASY-4020L PAGE 42
693-ASY-4020L PAGE 44
694-ASY-4020L PAGE 46
N/A
688-ASY-4020L PAGE 51
684-ASY-4020L PAGE 48
42
MORRIS CONTOUR IADVANTAGE SERIES OPENERS
Double-Shoot Granular• Fertilizer is placed down the middle of the row and on the same plane as the
seed. The seed is placed in two distinct rows measuring 3" centre to centre.
• The 4" Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
Double-Shoot Liquid• Note: all information from the opener above applies to this product as well.
• Quick change liquid insert provides easy switching from granular to liquid.
Single-Shoot• Can be used with any replaceable tip allowing you to choose the tip for your
conditions. (Tips sold separately.)
• Extra hard surfacing on critical wear areas to increase the life of the holder.
PAIRED ROW /// DRILL SPECIFIC
SINGLE-SHOOT /// DRILL SPECIFIC
683-ASY-4020G
683-KNH-1000 683-ASY-1000P
683-ASY-4020L
43
Double-Shoot Liquid• Quick change liquid insert provides easy switching
from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 683-ASY-0711LP, 683-ASY-0712LP
Double-Shoot Granular• Triple-Shoot Liquid Phosphorus Openers:
683-ASY-0711GP, 683-ASY-0712GP
SIDE BAND /// DRILL SPECIFIC
683-ASY-0711G (left) Shown Above683-ASY-0712G (right)
683-ASY-0711L (left) Shown Above683-ASY-0712L (right)
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
683-ASY-0711GP 683-ASY-0712GP 683-ASY-0711LP 683-ASY-0712LP
MULTI-SHOOT ///
OPTIONAL P TUBE
44
Double-Shoot Granular• Fertilizer is placed down the middle of the row and on the same plane as the
seed. The seed is placed in two distinct rows measuring 3" centre to centre.
• The 4" Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
Double-Shoot Liquid• Note: all information from the opener above applies to this product as well.
• Quick change liquid insert provides easy switching from granular to liquid.
Single-Shoot• Can be used with any replaceable tip allowing you to choose the tip for your
conditions. (Tips sold separately.)
• Extra hard surfacing on critical wear areas to increase the life of the holder.
PAIRED ROW /// DRILL SPECIFIC
SINGLE-SHOOT /// DRILL SPECIFIC
693-ASY-4020G
693-ASY-4020L
MORRIS CONTOUR IIADVANTAGE SERIES OPENERS
693-KNH-1000 693-ASY-1000P
45
Double-Shoot Liquid• Quick change liquid insert provides easy switching
from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 693-ASY-0711LP, 693-ASY-0712LP
Double-Shoot Granular• Triple-Shoot Liquid Phosphorus Openers:
693-ASY-0711GP, 693-ASY-0712GP
SIDE BAND /// DRILL SPECIFIC
693-ASY-0711G (left) Shown Above693-ASY-0712G (right)
693-ASY-0711L (left) Shown Above693-ASY-0712L (right)
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
693-ASY-0711GP 693-ASY-0712GP 693-ASY-0711LP 693-ASY-0712LP
MULTI-SHOOT ///
OPTIONAL P TUBE
46
CASE IH 700, NEW HOLLAND P2060,FLEXI-COIL PH5500 ADVANTAGE SERIES OPENERS
Double-Shoot Granular• Fertilizer is placed down the middle of the row and on the same plane as the
seed. The seed is placed in two distinct rows measuring 3" centre to centre.
• The 4" Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
Double-Shoot Liquid• Note: all information from the opener above applies to this product as well.
• Quick change liquid insert provides easy switching from granular to liquid.
Single-Shoot• Can be used with any replaceable tip allowing you to choose the tip for your
conditions. (Tips sold separately.)
• Extra hard surfacing on critical wear areas to increase the life of the holder.
PAIRED ROW /// DRILL SPECIFIC
SINGLE-SHOOT /// DRILL SPECIFIC
694-ASY-4020G
694-ASY-4020L
694-KNH-1000 694-ASY-1000P
47
Double-Shoot Liquid• Quick change liquid insert provides easy switching
from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 694-ASY-0711LP, 694-ASY-0712LP
Double-Shoot Granular• Triple-Shoot Liquid Phosphorus Openers:
694-ASY-0711GP, 694-ASY-0712GP
CASE IH 700, NEW HOLLAND P2060,FLEXI-COIL PH5500 ADVANTAGE SERIES OPENERS
SIDE BAND /// DRILL SPECIFIC
694-ASY-0711G (left) Shown Above694-ASY-0712G (right)
694-ASY-0711L (left) Shown Above694-ASY-0712L (right)
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
694-ASY-0711GP 694-ASY-0712GP 694-ASY-0711LP 694-ASY-0712LP
MULTI-SHOOT ///
OPTIONAL P TUBE
48
Double-Shoot Granular• Fertilizer is placed down the middle of the row and on the same plane as the
seed. The seed is placed in two distinct rows measuring 3" centre to centre.
• The 4" Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
Double-Shoot Liquid• Note: all information from the opener above applies to this product as well.
• Quick change liquid insert provides easy switching from granular to liquid.
Single-Shoot• Can be used with any replaceable tip allowing you to choose the tip for your
conditions. (Tips sold separately.)
• Extra hard surfacing on critical wear areas to increase the life of the holder.
PAIRED ROW /// DRILL SPECIFIC
SINGLE-SHOOT /// DRILL SPECIFIC
684-ASY-4020G
684-ASY-4020L
684-KNH-1000 684-ASY-1000P
CASE IH 800, NEW HOLLAND P2070,FLEXI-COIL PH5700 ADVANTAGE SERIES OPENERS
49
Double-Shoot Liquid• Quick change liquid insert provides easy switching
from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 684-ASY-0711LP, 684-ASY-0712LP
Double-Shoot Granular• Triple-Shoot Liquid Phosphorus Openers:
684-ASY-0711GP, 684-ASY-0712GP
SIDE BAND /// DRILL SPECIFIC
684-ASY-0711G (left) Shown Above684-ASY-0712G (right)
684-ASY-0711L (left) Shown Above684-ASY-0712L (right)
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
684-ASY-0711GP 684-ASY-0712GP 684-ASY-0711LP 684-ASY-0712LP
MULTI-SHOOT /// CASE IH 800, NEW HOLLAND P2070,FLEXI-COIL PH5700 ADVANTAGE SERIES OPENERS
OPTIONAL P TUBE
50
Double-Shoot Liquid• Quick change liquid insert provides easy switching
from granular to liquid.
• Triple-Shoot Liquid Phosphorus Openers: 686-ASY-0711LP, 686-ASY-0712LP
Double-Shoot Granular• Triple-Shoot Liquid Phosphorus Openers:
686-ASY-0711GP, 686-ASY-0712GP
SEED HAWKADVANTAGE SERIES OPENERS
SIDE BAND /// DRILL SPECIFIC
686-ASY-0711G (left) Shown Above686-ASY-0712G (right)
686-ASY-0711L (left) Shown686-ASY-0712L (right)
• The 2-1/4" Side Band tip provides you with the lowest draft and soil disturbance in the industry while ensuring great seed placement.
• Long-wearing carbide tip is reinforced where you need it – on the nose and wing.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement and virtually no plugging.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The streamlined holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
686-ASY-0711GP 686-ASY-0712GP 686-ASY-0711LP 686-ASY-0712LP
OPTIONAL P TUBE
51
Double-Shoot LiquidDouble-Shoot Granular
HORSCH WITH THE 84° SHANKADVANTAGE SERIES OPENERS
PAIRED ROW /// DRILL SPECIFIC
688-ASY-4020G 688-ASY-4020L
• Fertilizer is placed down the middle of the row and on the same plane as the seed. The seed is placed in two distinct rows measuring 3” centre to centre.
• The 4” Paired Row tip allows you to achieve great seedbed utilization.
• Extended wear life due to high-chrome tip with carbide inserts on the nose and underside.
• Carbide placement provides sharp cutting edges for excellent penetration.
• Hard facing is placed on critical wear points to ensure a long-lasting holder.
• Replaceable tip to ensure high-wear points can be replaced at a lower cost.
• The sleek holder design combined with the front delivery concept reduces plugging and encourages trash clearance.
• Note: all information from 688-ASY-4020G applies to this product as well.
• Quick change liquid insert provides easy switching from granular to liquid.
MULTI-SHOOT /// NEW
52
SEED BOOTSThe quick change seed boot system consists of two parts: the seed boot holder which bolts on to the back of the shank and the seed boot attachment which fits into the holder and is secured with a bolt and nut. There are six different interchangeable attachments to choose from, each giving a different seed spread pattern. This system allows you to match your seed spread to the width of opener you are using. It is perfect for producers who want to switch back and forth from a wide seed spread behind a sweep to a narrow seed band behind a knife.
53
54
300 SERIES
300-HLD-4700
300-ATM-1000
300-HLD-4710
300-ATM-1006
300-HLD-5000
300-ATM-1010
300-HLD-5010
300-ATM-1020
SEED BOOT HOLDERS
SEED BOOT ATTACHMENTS
This holder has 1-3/4" (45 mm) bolt hole spacing. The bolt hole section is designed flat to fit the Bourgault and Ezee-On 47° shanks.
This spreader attachment will distribute the seed evenly in a 3" to 4" (76 mm to 100 mm) band. Seed spread may vary depending on sweep size, soil type and fan speed.
This holder has 2-1/4" (57 mm) bolt hole spacing. The bolt hole section is curved to fit any chisel plow shank except the Bourgault and the Morris LH755 shank.
The straight attachment will spread the seed approximately 2-1/2" (63 mm). It works well with the quick change spoons, spikes or any size of sweep.
This holder has 1-3/4" (45 mm) bolt hole spacing. The bolt hole section is curved to fit all 47° shanks except the Bourgault and Ezee-On.
The spreader attachment will distribute the seed evenly in a 6" (152 mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for organic operations.
This holder has 2-1/4" (57 mm) bolt hole spacing. The bolt hole section is flat and has two sets of holes. The top set of holes should be used in almost all cases when mounting this holder to the shank. It fits on the Bourgault chisel plow shanks as well as the LH755 shank used on the Morris Magnum III and the Morris Concept 2000.
The splitter attachment will place the seed into two distinct rows approximately 6" (150 mm) apart. Seed spread may vary depending on sweep size, soil type and fan speed.
55
300-ATM-1031 300-ATM-1035 300-ATM-1036 300-BNC-4414
300-BLT-4414
600-NUT-3754
SEED BOOT ATTACHMENTS
This knife attachment will place the seed in a very narrow band. It is designed to be used behind the 200-VRT-1000, 410-VRT-1000, 410-KNF-0800 and 410-KNF-0801.
This bolt and nut secure the quick change seed boot attachments into the holders.
This knife attachment will place the seed in a very narrow band. It is designed to be used behind the 200-KNF-0810, 200-KNF-0811, 200-KNF-0813 and 200-KNH-4000.
This knife attachment will place the seed in a band. There is hard facing on the side and the slot is wider than the 300-ATM-1035. It is designed to be used behind the 200-KNF-0815.
300-SQR-1500300-SQR-1505
Square TubeThe square tube seed boot has a slotted top hole to fit 1-3/4" to 2-1/4" (45 to 57 mm) bolt spacing. It accepts 1-1/4" (32 mm) O.D. air hose. The 300-SQR-1500 seed boot is designed to fit curved bottom shanks. The 300-SQR-1505 seed boot is designed to fit flat bottom shanks.
SEED BOOTS
SEED BOOT ///
56
FERTILIZER KNIVESWe understand the importance of your fertilizer operation and that you depend on your opener to get it done right. That is why we have designed a full line of fertilizer knives that are durable and stand up to most every condition. Choose from NH3, Granular or Maxquip options.
47° C-Shank
47° and 50° C-Shank
200 Series Speed-Loc™
410 Series Speed-Loc™
57
GRANULAR LIQUID MAXQUIP NH3NH3 LIQUID
PHOSPHOROUS
FERTILIZER TYPES
58
Fits 47° and 50° C-Shank• Enjoy the flexibility of using any replaceable tip from pages 16 and 17.
(Tips sold separately.)
• The welded tube fits 1/2" (12 mm) cold-flow anhydrous kits.
• Not recommended for rocky areas.
Fits 200 Series Speed-Loc™• Fits on any 200 Series adapter for easy installation and fast replacement.
• Enjoy the flexibility of using any replaceable tip from pages 16 and 17. (Tips sold separately.)
• The welded tube fits 1/2" (12 mm) cold-flow anhydrous kits.
• Not recommended for rocky areas.
Fits 200 Series Speed-Loc™• Fits on any 200 Series adapter for easy installation and fast replacement.
• Available with carbide tip (7521) or without (7520). The carbide provides extra wear life and much better penetration.
• The welded tube fits 1/2" (12 mm) (200-KNF-7521 & 7520) cold-flow anhydrous kits or 3/8" (9 mm) (200-KNF-7531 & 7530) hot-gas anhydrous kits.
• Shorter tube length makes this opener better for cultivators and chisel plows.
• Welded tip makes this opener better in rocky conditions.
Fits 200 Series Speed-Loc™• Fits on any 200 Series adapter for easy installation and fast replacement.
• Available with carbide tip (7525) or without (7524). The carbide provides extra wear life and much better penetration.
• The tube fits 1/2" (12 mm) cold-flow anhydrous kits.
• The longer tube length makes this opener better for air seeders and air drills.
• Welded tip makes this opener better in rocky conditions.
FERTILIZER KNIVES
050-KNH-0820
200-KNH-4020
200-KNF-7520200-KNF-7521200-KNF-7530200-KNF-7531
200-KNF-7524 200-KNF-7525
59
Fits 410 Series Speed-Loc™• Fits on any 410 Series adapter for easy installation and fast replacement.
• Available with carbide tip (0825) or without (0824). The carbide provides extra wear life and much better penetration.
• The fertilizer tube fits 1/2" (12 mm) (410-KNF-0825 & 0824) cold-flow anhydrous kits or 3/8" (9 mm) (410-KNF-0830 & 0831) hot-gas anhydrous kits.
• This opener is designed for heavy-duty use.
• Welded tip makes this opener better in rocky conditions.
Fits 47° and 50° C-Shank• This is the most durable opener that we provide for fertilizer placement.
• The tube fits 1/2" (12 mm) cold-flow anhydrous kits.
• Choose from a 3/4" (19 mm) chrome (600-TIP-7500) or carbide (600-TIP-7501) tip. (Tips sold separately.)
• Fits 1-3/4" (44 mm) to 2-1/2" (63 mm) bolt hole spacing. Use on a 43° shank with the addition of a 7° wedge.
Fits 47° and 50° C-Shank• This is the most durable opener that we provide for fertilizer placement.
• The tube fits 3/8" (9 mm) hot-gas anhydrous kits.
• Choose from a 3/4" (19 mm) chrome (600-TIP-7500) or carbide (600-TIP-7501) tip. (Tips sold separately.)
• Fits 1-3/4" (44mm) to 2-1/2" (63 mm) bolt hole spacing. Use on a 43° shank with the addition of a 7° wedge.
410-KNF-0824410-KNF-0825 410-KNF-0830410-KNF-0831
600-KNH-7520
600-KNH-7530
Not sure which bolts you need?
Refer to our bolt length chart on pages 96-98.
FERTILIZER KNIVES ///
60
Fits 410 Series Speed-Loc™• Fits on any 410 Series adapter for easy installation and fast replacement.
• The tube fits 1/2" (12 mm) (410-KNF-7551) cold-flow anhydrous kits or 3/8" (9 mm) (410-KNF-7553) hot-gas anhydrous kits. An additional 1-1/4" tube is used for granular fertilizer. This tube also accepts 1-1/8" tube with 880-BSH-1130.
• Welded 3/4" (19 mm) tip makes this opener better in rocky conditions.
• Not recommended for seeding.
• Available in 200 series (200-KNF-7551)
Fits 47° and 50° C-Shank• The tube fits 1/2" (12 mm) cold-flow anhydrous kits. An additional 1-1/4" tube is used
for granular fertilizer. This tube also accepts 1-1/8" tube with 880-BSH-1130.
• Choose from a 3/4" (19 mm) chrome (600-TIP-7500) or carbide (600-TIP-7501) tip. (Tips sold separately.)
• Fits 1-3/4" (44 mm) to 2-1/2" (63 mm) bolt hole spacing. Use on a 43° shank with the addition of a 7° wedge.
• This is the most durable opener that we provide for fertilizer placement.
Fits 47° and 50° C-Shank• Accepts 1-1/4" (31 mm) and 1-1/8" (28 mm) granular hose (with 880-BSH-1130).
• Choose from a 3/4" (19 mm) chrome (600-TIP-7500) or carbide (600-TIP-7501) tip. (Tips sold separately.)
• Fits 1-3/4" (44 mm) to 2-1/2" (63 mm) bolt hole spacing. Use on a 43° shank with the addition of a 7° wedge.
• This is the most durable opener that we provide for fertilizer placement.
Fits 47° C-Shank• Accepts 1-1/4" (31 mm) and 1-1/8" (28 mm) granular hose (with 880-BSH-1130).
• Choose from a 3/4" (19 mm) chrome (600-TIP-7500) or carbide (600-TIP-7501) tip. (Tips sold separately.)
• 1-3/4" (45 mm) bolt hole spacing designed to fit on 47° shank.
• This is the most durable opener that we provide for fertilizer placement.
• This opener is designed to fit on the Bourgault shank better than the 600 Series.
410-KNF-7551410-KNF-7553
600-KNH-7552
600-KNH-7540
599-KNH-7540
FERTILIZER KNIVES
61
Hose Holder• Stainless steel hose holder.
• Mount on any C-shank.
• Completely height adjustable.
• Holds the NH3 hose in place.
Bolt and Nut Combo• Use to hold the 600 Series tips onto the 599 and 600 Series knife holders.
Chrome Tip• 3/4" chrome tip fits all 599 and 600 Series knife holders.
• Does not fit 600-KNH-7562.
Carbide Tip• 3/4" chrome tip with carbide on the nose fits all 599 and 600 Series knife holders.
• Does not fit 600-KNH-7562.
Carbide Tip with wing for liquid application• 3/4" carbide tip fits 600-KNH-7562.
• Allows vertical and horizontal separation when shooting liquid.
600-HHA-0750
600-BNC-5000
600-NUT-3754
600-BLT-5004
600-TIP-7500
600-TIP-7501
600-TIP-7507
FERTILIZER ACCESSORIES ///
62
FERTILIZER KNIVES
Fits 47° and 50° C-Shank• Accepts 1-1/4" and 1-1/8" granular hose
(insert included).
• This opener comes standard with a 3/4" carbide tip. Inquire about other tip options.
• 675-ASY-1801GN accepts 1/2" (12 mm) hose for cold-flow anhydrous kits.
• 675-ASY-1801GM accepts Maxquip anhydrous systems.675-ASY-1801GM 675-ASY-1801GN
685-ASY-1801G 685-ASY-1801M
685-ASY-1801N 685-ASY-1801L 685-ASY-1801GM 685-ASY-1801GN
Fits Bourgault 3310 & 3320 PHD• Use on the Bourgault 3310 & 3320 Mid Row Shank.
• Deliver any one of the following fertilizers: granular, liquid, NH3 or NH3 Maxquip.
• 685-ASY-1801GM and 685-ASY-1801GN give you the flexibility to switch between products or place both products down at the same time.
• This opener comes standard with a 3/4" carbide tip. Inquire about other tip options.
• Fits 1/2" (12 mm) cold-flow anhydrous kits or Maxquip anhydrous systems.
• Accepts 1-1/2" granular hose.
MID ROW SHANKS
63
64
TILLAGEWhat’s in a sweep? Most sweeps on the market today are made with very comparable material. If the material used doesn’t set the sweep apart, then what makes the difference in the life and quality of a sweep?
• Precise Heat Treatment • Long-Lasting Design• Consistent Quality• Innovative Speed-Loc™
65
66
200 SERIESSPEED-LOC™ PRODUCTS
SIZE THICKNESS PRODUCT NO.
4" (100 mm) 1/4"(6 mm) 200-PWV-0400
5" (140 mm) 1/4" (6 mm) 200-PWV-0500
5" (140 mm) 5/16" (8 mm) 200-PWV-0508
7" (180 mm) 1/4" (6 mm) 200-PWV-0700
7" (180 mm) 5/16" (8 mm) 200-PWV-0708
9" (230 mm) 1/4" (6 mm) 200-PWV-0900
9" (230 mm) 5/16" (8 mm) 200-PWV-0908
10" (254 mm) 1/4" (6 mm) 200-PWV-1000
10" (254 mm) 5/16" (8 mm) 200-PWV-1008
11" (280 mm) 1/4" (6 mm) 200-PWV-1100
11" (280 mm) 5/16" (8 mm) 200-PWV-1108
12" (305 mm) 1/4" (6 mm) 200-PWV-1200
12" (305 mm) 5/16" (8 mm) 200-PWV-1208
13" (330 mm) 1/4" (6 mm) 200-PWV-1300
13" (330 mm) 5/16" (8 mm) 200-PWV-1308
14" (355 mm) 1/4" (6 mm) 200-PWV-1400
14" (355 mm) 5/16" (8 mm) 200-PWV-1408
16" (406 mm) 5/16" (8 mm) 200-PWV-1608*
18" (457 mm) 5/16" (8 mm) 200-PWV-1808*
This sweep is only available in 5/16" (8 mm) thickness and was developed for Western Europe. It is not recommended for most North American field conditions.
*Available in North America by special order only.
4"
7"
10"
12"
14"
5"
9"
11"
13"
16"
67
This “Goosefoot” tillage tool is 5/16" (8 mm) thick and 2-1/2" (63 mm) wide. It is designed specifically for vibrating S-tine cultivators.
This sweep is 1/4" (6 mm) thick and 4" (100 mm) wide. It is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases the life expectancy. The nose on this sweep runs 1/2" (12 mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.
This quick change spike is 5/8" (15 mm) thick, 2" (50 mm) wide and 4" (102 mm) long. It has a hardened wear pad (52-56 HRC) for extra life. This tool is made specifically for slurry injection.
This sweep is 5/16" (8 mm) thick and 4" (100 mm) wide with a 4" wide extended wear pad.
This sweep is 5/16" (8 mm) thick and 9" (230 mm) wide. The wear pad extends up the entire stem.
This quick change spike is 5/8" (15 mm) thick, 2-1/4" (57 mm) wide and 6" (150 mm) long. It has a hardened wear pad (52-56 HRC) for extra life. This tool is ideal for primary tillage or banding fertilizer.
This sweep is 5/16" (8 mm) thick and 4" (100 mm) wide. It is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases its life expectancy.
This quick change spike is 5/8" (15 mm) thick, 2-1/4" (57 mm) wide and 6" (150 mm) long. It has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths.
This sweep is 5/16" (8 mm) thick and 5" (127 mm) wide. It is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases its life expectancy.
200-GFO-0308
200-PWV-0405
200-SPK-0200
200-PWV-0428*
200-SPK-0215
200-PWV-0528*
200-SPK-0230
200-PWV-0738* 200-PWV-0928*
*Available in North America by special order only.
TILLAGE ///
68
410 SERIESSPEED-LOC™ PRODUCTS
SIZE THICKNESS PRODUCT NO.
4" (100 mm) 1/4" (6 mm) 410-PWV-0400
6" (150 mm) 1/4" (6 mm) 410-PWV-0600
6" (150 mm) 5/16" (8 mm) 410-PWV-0608
8" (200 mm) 1/4" (6 mm) 410-PWV-0800
8" (200 mm) 5/16" (8 mm) 410-PWV-0808
10" (254 mm) 1/4" (6 mm) 410-PWV-1000
10" (254 mm) 5/16" (8 mm) 410-PWV-1008
12" (305 mm) 1/4" (6 mm) 410-PWV-1200
12" (305 mm) 5/16" (8 mm) 410-PWV-1208
14" (355 mm) 1/4" (6 mm) 410-PWV-1400
14" (355 mm) 5/16" (8 mm) 410-PWV-1408
16" (406 mm) 1/4" (6 mm) 410-PWV-1600
16" (406 mm) 5/16" (8 mm) 410-PWV-1608
18" (457 mm) 1/4" (6 mm) 410-PWV-1800
18" (457 mm) 5/16" (8 mm) 410-PWV-1808
6"
10"
14"
18"
4"
8"
12"
16"
69
Sweep with Hardened Wear Pad• 5/16" (8 mm) thick and 4" (100 mm) wide.
• 3/8" hardened wear pad (52-56 HRC) for longer life.
• Runs at a 13° pitch, which is steeper than the regular 410 sweep.
Sweep with Hardened Wear Pad• 5/16" (8 mm) thick and 5" (140 mm) wide.
• 3" hardened wear pad.
• Runs at a 3° pitch, which is the same as a standard sweep.
Spike• Heavy-duty quick change spike.
• 2" (50 mm) wide, 5/8" (15 mm) thick and 9" (230 mm) long.
• Hardened wear pad (52-56 HRC) for long life.
• Works well for primary tillage or for banding fertilizer.
410-PWV-0418
410-PWV-0518
410-SPK-0200
TILLAGE ///
70
BOLT-ON SERIES
SIZE THICKNESS PRODUCT NO.
6" (150 mm) 1/4" (6 mm) 050-PWV-0600
8" (200 mm) 1/4" (6 mm) 050-PWV-0800
10" (254 mm) 1/4" (6 mm) 050-PWV-1000
050 SeriesFor heavy-duty chisel plows with 50° shanks and 2-1/4" (57 mm) hole centres.
SIZE THICKNESS PRODUCT NO.
8" (200 mm) 1/4" (6 mm) 043-PWV-0800
10" (254 mm) 1/4" (6 mm) 043-PWV-1000
12" (305 mm) 1/4" (6 mm) 043-PWV-1200
14" (355 mm) 1/4" (6 mm) 043-PWV-1400
16" (420 mm) 1/4” (6 mm) 043-PWV-1600
18" (460 mm) 1/4" (6 mm) 043-PWV-1800
SIZE THICKNESS PRODUCT NO.
4" (100 mm) 1/4" (6 mm) 047-PWV-0400
9" (230 mm) 1/4" (6 mm) 047-PWV-0900
10" (254 mm) 1/4" (6 mm) 047-PWV-1000
11" (280 mm) 1/4" (6 mm) 047-PWV-1100
12" (305 mm) 1/4” (6 mm) 047-PWV-1200
13" (330 mm) 1/4" (6 mm) 047-PWV-1300
Our bolt-on sweeps fit all makes and models of tillage equipment.
The Extended Stem AdvantageThe stem or neck on our bolt-on sweeps is longer than that of our competitors. This extended stem allows us to punch the bolt holes higher than on any other brand of sweeps. This reduces stem breaking and results in less wear on the shank and less wear and stone damage to the bottom bolt. Less wear on the shank extends the useful life of the sweep, and less stone damage on the bottom bolt means fewer problems when changing shovels. The extended stem feature saves you time and money.
043 SeriesFor heavy-duty chisel plows with 43° shanks and 2-1/4" to 2-1/2" (57 mm to 64 mm) hole centres.
047 SeriesFor field cultivators with 47° shanks and 1-3/4" (45 mm) hole centres.
SIZE THICKNESS PRODUCT NO.
12" (305 mm) 1/4" (6 mm) 050-PWV-1200
14" (355 mm) 1/4” (6 mm) 050-PWV-1400
16" (420 mm) 1/4" (6 mm) 050-PWV-1600
18" (460 mm) 1/4" (6 mm) 050-PWV-1800
Not sure which bolts you need? Refer to our bolt length chart on pages 78–80.
71
Reversible Spike• 2" (50 mm) wide, 5/8" (16 mm) thick and 14" (355 mm) long.
• 1-3/4" to 2" (45 to 57 mm) bolt hole spacing.
• Shorter than our other two reversible spikes, it is designed for light- to medium-duty field cultivators or for chisel plows where ground clearance in transport is a concern.
Reversible Spike• 2" (50 mm) wide, 5/8" (16 mm) thick and 17" (431 mm) long.
• 2-1/4" (57 mm) bolt hole spacing.
• Flat through the bolt hole section, it is designed specifically to fit the Bourgault chisel plow as well as the Morris LH 755 shank.
Reversible Spike• 2" (50 mm) wide, 5/8" (16 mm) thick and 16-1/2" (419 mm) long.
• 2-1/4" to 2-1/2" (57 to 63 mm) bolt hole spacing.
• Curved at the bolt hole section, it can be used on any chisel plow shank except the Bourgault and Morris LH 755 shank.
Reversible Chisel• 5/16" (8 mm) thick and 4" (100 mm) wide.
• 1-3/4" (45 mm) bolt hole spacing to fit light- and medium-duty field cultivators.
• Use mostly for primary tillage in the fall or early spring.
Reversible Chisel• 5/16" (8 mm) thick and 4" (100 mm) wide.
• 2-1/4" to 2-1/2" (57 to 63 mm) bolt hole spacing.
• Use mostly for primary tillage in the fall or early spring.
070-RSP-0200A
070-RSP-0210A
070-RSP-0220A
070-RCH-0451
070-RCH-0452
TILLAGE ///
72
ACCESSORIES
200-DRV-1030
This driver should be used when installing the following openers: 200-KNF-0505, 200-VRT-1000, 200-VRT-1011, 200-VRT-1016, 200-VRT-1061 and 410-VRT-1000. It should also be used when installing knives with the following tips: 200-TIP-0503, 200-TIP-0507, 200-TIP-0523, 200-TIP-0524, 200-TIP-0531 and 200-TIP-1011.
100-DRV-1010
This driver should be used for installing the following knives: 200-KNF-0861, 200-KNF-0863, 200-KNF-7510, 200-KNF-7511, 200-KNF-7518, 200-KNF-7542, 200-KNF-7520, 200-KNF-7521, 200-KNF-7524, 200-KNF-7525, 200-KNF-7530 and 200-KNF-7531.
100-DRV-1020
This driver is used when installing the 200-HOE-1700 onto the adapter.
200-DRV-1013
This driver should be used when installing knives with the following tips: 200-TIP-2011, 200-TIP-0300, 200-TIP-3001, 200-TIP-3011 and 200-TIP-4011. It should also be used when installing the 200-KNF-0501, 200-KNF-0571 and 200-KNF-0575.
200-BNC-3100
Stainless steel square nut and bolt. Used to secure any quick change tip. This combination is made up of 200-BLT-3102 and 200-NUT-3101.
200-DRV-1012
This driver should be used for installing the 200-KNF-0813.
100-WDG-0700
This 7° urethane wedge is designed to correct the pitch of the 100-QCA-5010 and the 200-QCA-5010 adapters on 43° shanks.
200-WDG-0206
This 2° urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.
200-WDG-0506
This 5° urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.
200-WDG-1000 200-WDG-1006
This 10° urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.
This 10° urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.
400-WDG-0300
This 3° urethane wedge is designed to correct the pitch of the 410-QCA-5010 adapter on a 47° chisel plow shank, as well as the 50° bolt-on sweeps.
400-WDG-0700
This 7° urethane wedge is designed to correct the pitch of the 410-QCA-5010 adapter when installing on a 43° shank. It should also be used with the 600 Series knives when installing on a 43° shank.
880-WDG-0301
This cast wedge adapter is designed for our 047, 610 and 612 seeding openers on all 50° curved bottom shanks including the John Deere 1830 but excluding all other John Deere models.
200-QAS-4711
This sub-plate is used in conjunction with the 200-QCA-4710 adapter on the Kongskilde VFM shank.
200-QAS-4712 680-ACC-0002
This sub-plate is used in conjunction with the 200-QCA-4710 adapter on an S-tine. S-tines with a single hole can now use the Speed-Loc™ system.
Spacer required when a 680-ASY-4026 is mounted on a Bourgault 3310 & 3320 PHD Drill.
880-WDG-0300
This cast wedge adapter is designed for our 047, 610 and 612 seeding openers on all John Deere shanks except the John Deere 1830.
73
400-DRV-1000
This driver can be used when installing any of the quick change sweeps and spoons.
400-DRV-1010
This driver should be used when installing the following knives: 200-KNF-0810, 200-KNF-0811, 410-KNF-0800 and 410-KNF-0801. It should also be used for installing knives with the following tips: 200-TIP-0800 and 200-TIP-0801.
100-HAM-4000
This 4 lb (1.8 kg) hammer is ideal for installing all quick change products.
200-REL-1010 047-ACC-1001
The speed-release tool must be used to remove 200 and 410 Series sweeps and openers off the Speed-Loc™ adapters.
Helps direct the flow of seed in a focused row behind the opener. Use with 047-ASY-1000 or 675 Series openers.
680-ACC-1000
Helps direct the flow of seed in a focused row behind the opener. Use with 680-ASY-1000 openers prior to 2012.
300-BSH-1200
This bushing adapts from a 1-1/8" (28 mm) O.D. air hose up to a 1-1/4" (31 mm) O.D. air hose.
300-BSH-1205
This bushing adapts from 1-1/8" (28 mm) O.D. air hose to 1-1/8" (28 mm) O.D. air hose.
880-BSH-1130
This bushing is needed when you are using 1-1/8" (28 mm) hose.
880-HCL-0001
This clip eliminates hose movement, as the sharp corners imbed into the granular pipe.
880-CPL-2500
This coupler is used to attach an 1-1/4" O.D. liquid phosphorous tube. Included with all new liquid phosphorous openers.
880-BSH-1150
This bushing adapts from 1-1/4" (31 mm) O.D. air hose up to a 1-1/2" (31 mm) O.D. air hose.
880-ORF-0001880-HCL-0002
This orifice is used to concentrate and direct the flow of liquid fertilizer on the 200-VRT-1061 and 200-KNF-0863.
Spacer clip may be required on the rear tube of the following side band openers: 683, 684, 686, 693, 694 where 1-1/8" hose is used.
047-ACC-1002
Allows you to adapt to any shank with an open bottom hole. Keeps the bottom bolt in place on the John Deere 1820, 1830 & 2400.
880-ASY-1000 680-ACC-0001 680-ACC-0003
Adapt a .085 mm Maxquip system with our NH3 (1/2") fertilizer openers. This kit gives you everything you need to adapt to an existing line.
Spacer plate is required for the Concord when installing any Edge-On product.
Space required when a 680-ASY-4020 is mounted on a Bourgault 3310 & 3320 PHD Drill.
ACCESSORIES ///
74
PRODUCT DEPTH CHART0
47-K
NH
-10
00
050
-KN
H-0
810
& 0
812
W/ 2
00
-TIP
-08
00
050
-KN
H-0
810
& 0
812
W/ 2
00
-TIP
-08
01
050
-KN
H-0
810
& 0
812
W/ 2
00
-TIP
-30
00
050
-KN
H-0
810
& 0
812
W/ 2
00
-TIP
-30
01
050
-KN
H-0
810
& 0
812
W/ 2
00
-TIP
-30
11
050
-KN
H-0
810
& 0
812
W/ 2
00
-TIP
-10
11
200
-HO
E-17
00
200
-KN
F-0
80
0 &
08
01
200
-KN
F-0
80
3
200
-KN
F-0
86
3 &
08
61
200
-KN
F-75
11, 7
510
, 751
8, 7
542
200
-KN
F-75
20, 7
521,
752
4, 7
525,
753
0, 7
531
200
-KN
H-0
500
W/ 2
00
-TIP
-052
3
200
-KN
H-0
510
W/ 2
00
-TIP
-050
3
200
-KN
H-0
510
W/ 2
00
-TIP
-050
7
200
-KN
H-4
010
W/ 2
00
-TIP
-08
00
200
-KN
H-4
010
W/ 2
00
-TIP
-08
01
200
-KN
H-4
010
W/ 2
00
-TIP
-30
00
200
-KN
H-4
010
W/ 2
00
-TIP
-30
01
200
-KN
H-4
010
W/ 2
00
-TIP
-30
11
200
-KN
H-4
010
W/ 2
00
-TIP
-10
11
200
-PW
V-0
405
200
-PW
V-0
400
TO 2
00
-PW
V-1
200
200
-PW
V-1
300
& 14
00
200
-PW
V-0
508
TO 2
00
-PW
V-1
208
200
-PW
V-0
518
200
-PW
V-1
308
& 14
08
200
-SP
N-0
200
, 020
8, 0
300
, 030
8
200
-SP
K-0
200
& 0
215
200
-VR
T-10
11, 1
00
0, 1
016
, 10
40
200
-VR
T-10
61
599-
KN
H-7
512
& 7
540
W/ 6
00
-TIP
-750
0 &
750
1
050
-KN
H-0
500
W/ 2
00
-TIP
-052
3
050
-KN
H-0
810
W/ 2
00
-TIP
-08
00
050
-KN
H-0
810
W/ 2
00
-TIP
-10
11
050
-KN
H-0
812
W/ 2
00
-TIP
-08
00
050
-KN
H-0
812
W/ 2
00
-TIP
-10
11
410
-KN
F-0
80
0 &
08
01
410
-KN
F-0
824
& 0
825
410
-KN
F-0
830
& 0
831
410
-KN
H-0
500
W/ 2
00
-TIP
-052
3
410
-KN
H-4
00
0 W
/ 20
0-T
IP-0
80
1
410
-PW
V-0
400
410
-PW
V-0
600
& 0
608
410
-PW
V-0
80
0 &
08
08
410
-PW
V-1
00
0 &
100
8
410
-PW
V-1
200
& 12
08
410
-PW
V-1
400
& 14
08
410
-PW
V-1
600
& 16
08
410
-PW
V-1
80
0 &
180
8
410
-SP
K-0
200
410
-SP
N-0
300
& 0
308
600
-KN
H-7
510
W/ 6
00
-TIP
-750
1
600
-KN
H-7
520
W/ 6
00
-TIP
-750
1
600
-KN
H-7
530
W/ 6
00
-TIP
-750
1
600
-KN
H-7
540
W/ 6
00
-TIP
-750
1
600
-KN
H-7
550
W/ 6
00
-TIP
-750
1
600
-KN
H-7
561 W
/ 60
0-T
IP-7
501
600
-KN
H-7
562
W/ 6
00
-TIP
-750
1
200 SERIES
410 SERIES
DEP
TH IN
INCH
ESD
EPTH
IN IN
CHES
0
1
2
3
4
5
6
0
1
2
3
4
5
6
75
Speed-Loc™ REPLACEMENT PARTS
Note: a complete package for the 410 Series can be ordered including bushing, spring ball, pin and dust seal. Order part number 410-SLC-1050.
Replacement bushing for all 200 Series adapters as well as the 410-QCA-5050. Comes complete with dust seal.
Replacement spring ball for the 200-QCA-4710, 200-QCA-5000 and 200-QCA-5010 adapters.
Replacement bushing for the 410-QCA-5000, 410-QCA-5010 and 410-QCA-5020. Comes complete with dust seal.
Replacement spring ball for the 200-QCA-4700 adapters.
Replacement spring ball for 200-QCA-5030 adapters.
Replacement dust seal for all 200 and 410 Series Speed-Loc™ adapters.
Replacement spring ball for the 200-QCA-5020 and 410-QCA-5050 adapters.
Replacement locking pin for all the 410 Series adapters*. Go to 200-SLC-1020 if 410 Series adapter was purchased after Nov. 1/08.
*Prior to Nov. 1/08
Replacement locking pin for all 200 and 410* Series adapters.
*After Nov. 1/08
Replacement spring ball for 200-QCA-5020 adapter for special applications.
Replacement spring ball for the 410-QCA-5000, 410-QCA-5010 and 410-QCA-5020.
200-SLC-1001
200-SLC-1035
410-SLC-1001
200-SLC-1010
200-SLC-1037
410-SLC-1022*
200-SLC-1020
200-SLC-1038
410-SLC-1030
200-SLC-1030
200-SLC-1039
For Speed-Loc™ adapter refer to pages 10-13.
76
SINGLE-SHOOT FRONT DELIVERY, ADVANTAGE SERIES AND TITAN OPENERSC-SHANK ASSEMBLIES
3
4
4
1
9
5
10
6
7
2
8
2
8
4
5
10
9
1
3
7
6
PART#
1 610-HLD-2000 n
2 610-TIP-4041 n
3 610-TUB-1001 n
4 880-BSH-1130 n
5 047-CAP-1000 n
6 942-HRG-0754 n
7 906-NPT-2505 n
8 200-BNC-3100 n
9 908-NNI-2504 n
10 942-HRG-2004 n
610-
ASY
-402
0
Advantage Series 'C' Shank Granular Fertilizer
PART#
1 610-HLD-2000 n
2 610-TIP-4041 n
3 610-TUB-2526 n
4 880-BSH-1130 n
5 047-CAP-1000 n
6 942-HRG-0754 n
7 906-NPT-2505 n
8 200-BNC-3100 n
9 908-NNI-2504 n
10 942-HRG-2004
610-
ASY
-402
6
Advantage Series 'C' Shank Liquid Fertilizer
610-ASY-4020
610-ASY-4026
77
Requires a hose clamp (880-HCL-8117)
2
4
5
3
9
11 10
1
8 7
12
6*or (Not Shown)
NOTES: * The optional focus strip (047-ACC-1001) is reccomended but not included for openers 675-ASY-1801GM & 675-ASY-1801GN.
4
5
Second bushing is required for Granular assembly
1 or 2
7 or 6
9
8
13
10 9
143
12 Requires a hose clamp (880-HCL-1828)
11PART#
1 610-HLD-2000 n
2 610-TIP-4041 n
3 610-TUB-1001 n
4 880-BSH-1130 n
5 047-CAP-1000 n
6 942-HRG-0754 n
7 906-NPT-2505 n
8 200-BNC-3100 n
9 908-NNI-2504 n
10 942-HRG-2004 n
PART#
1 610-HLD-2000 n
2 610-TIP-4041 n
3 610-TUB-2526 n
4 880-BSH-1130 n
5 047-CAP-1000 n
6 942-HRG-0754 n
7 906-NPT-2505 n
8 200-BNC-3100 n
9 908-NNI-2504 n
10 942-HRG-2004
Bolt-On Side-BandDouble & Triple
Shoot Knife
PART#
1 612-HLD-0711 n n n n
2 612-HLD-0712 n n n n
3 612-CAP-1002 n n n n n n n n
4 942-HRG-2004 n n n n n n n n
5 200-BNC-3100 n n n n n n n n
6 612-TIP-0711 n n n n
7 612-TIP-0712 (Shown) n n n n
8 908-NNI-2504 n n n n n n n n
9 880-BSH-1130 n n n n n n n n
10 047-TUB-2540 n n n n
11 612-TUB-6061 n n n n
12 880-HCL-1828 (not shown)
n n n n n n n n
13 880-CPL-2500 n n n n
14 880-HCL-0001 n n n n
612-
ASY
-071
1
612-
ASY
-071
2
612-
ASY
-071
1P
612-
ASY
-071
2P
612-
ASY
-071
1L
612-
ASY
-071
2L
612-
ASY
-071
1LP
612-
ASY
-071
2P
PART#
1 047-HLD-1000 n n
2 612-CAP-1000 n n
3 612-TUB-1010 n n
4 200-BNC-3100 n n
5 200-TIP-0801 n n
6* 047-ACC-1001 n n
7 675-TUB-5025 n
8 675-TUB-1285 n
9 880-BSH-1130 n n
10 908-NNI-2504 n n
11 942-HRG-2004 n n
12 880-HCL-8117 (not shown)
n n
675-
ASY
-180
1GM
675-
ASY
-180
1GN
612-ASY-0711-LEFT
612-ASY-0712-RIGHT (SHOWN
675-ASY-1801
ASSEMBLIES ///
NOTES: # Two 880-BSH-1130 are included with the granular openers ## Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.
78
1
2
3
65
4
5 2
7
9
3 8or
6
4 1
SINGLE-SHOOT FRONT DELIVERY, ADVANTAGE SERIES AND TITAN OPENERSC-SHANK ASSEMBLIES
PART#
1 047-HLD-1000 n n
2 880-BSH-1130 n n
3 047-CAP-1000 n
4 047-TUB-2540 n
5 908-NNI-2504 n n
6 942-HRG-2004 n n
7 047-ACC-1001 n n
8 047-CAP-1001 n
9 880-CPL-2500 n
047-
ASY
-100
0
047-
ASY
-100
0P
Front Delivery Bolt-On Knife
PART#
1 620-HLD-5000 n
2 620-TIP-0510 n
3 628-SBT-2000 n
4 200-BNC-3100 n
5 620-BLT-3100 n
6 906-NPT-3135 n
620-
ASY
-501
5
Titan SeriesDouble-Shoot Knife
Granular Fertilizer
620-ASY-5015
047-ASY-1000
79
NOTES A & B: The hose clamp and "O" clamp are not shown in the diagram, but they are required to secure the tubes in place and they are included.
620-ASY-50208
4
3
6
1
5
2
620-ASY-5010
620-ASY-5020M
65
3
7
1
4
2
9
PART#
1 620-HLD-5000 n n n
2 620-TIP-0510 n n n
3 620-SSH-1000 n n n
4 200-BNC-3100 n n n
5 906-NPT-3135 n n n
6 620-BLT-3100 n n n
7 620-ACC-0001 n n
8 620-TUB-1021 n
9 695-TUB-1225 n
A 880-HCL-5610 n n
B 695-HCL-1220 n
620-
ASY
5010
620-
ASY
-502
0M
620-
ASY
-502
0N
TitanDouble-Shoot Knife
PART#
1 610-HLD-2080 n n n n
2 610-CAP-1080 n n n n
3 200-BNC-3100 n n n n
4 942-HRG-2004 n n n n
5 908-NN1-2504 n n n n
6 610-TIP-4081 n n n n
7 880-HCL-0001 n
8 880-HCL-1828 (not shown)
n n n n
9 880-TUB-1002 n
10 880-TUB-1004 n
11 880-TUB-1006 n
*12 880-BSH-1000 n n n
610-
ASY
-408
1
610-
ASY
-408
1L
610-
ASY
-408
1M
610-
ASY
-408
1N
620-ASY-5010/5020
610-ASY-4081
ASSEMBLIES ///
109
11
Insert bushing Prior to Installing Tip
12*
7
NOTES: 880-BSH-1000 is included when ordering 9, 10 and 11
80
*NOTE 680-ACC-0001 is a spacer plate that is required for the Concord only. Not included in the assembly 680-ACC-0002 is a spacer that is required for a Bourgault 3310. & 3320 only. Not included in the assembly.
1
8 *
4
7
9 *
3
6
52
7
8 *
4
1
9 *
2
4
3
6 5*NOTE: 680-ACC-0001 is a spacer plate that is required for the Concord only. Not included in the assembly.680-ACC-0003 is a spacer plate that is required for a Bourgault 3310 & 3320 only. Not included in assembly.
SINGLE-SHOOT FRONT DELIVERY, ADVANTAGE SERIES AND TITAN OPENERSEDGE-ON ASSEMBLIES
Advantage SeriesEdge-On Shank Liquid Fertilizer
Advantage SeriesEdge-On Shank
Granular Fertilizer
PART#
1 680-HLD-2000 n
2 610-TIP-4041 n
3 610-TUB-2526 n
4 880-BSH-1130 n
5 942-HRG-0754 n
6 906-NPT-2505 n
7 200-BNC-3100 n
8* 680-ACC-0001 n
9* 680-ACC-0002 n
PART#
1 680-HLD-2000 n
2 610-TIP-4041 n
3 610-TUB-1001 n
4 880-BSH-1130 n
5 942-HRG-0754 n
6 906-NPT-2505 n
7 200-BNC-3100 n
8* 680-ACC-0001 n
9* 680-ACC-0003 n
680-
ASY
-402
668
0-A
SY-4
020
680-ASY-4020
680-ASY-4026
81
NOTE: *Component required for the Concord only. Not included in the assembly.
8
12
*
7
6 or 5
1 , 2 , 3 , 4 ,or
9
Requires a hose clamp (880-HCL-8117)11
10
PART#
1 682-HLD-0711 n n
2 682-HLD-0711P n n
3 682-HLD-0712 n n
4 682-HLD-0712P n n
5 612-TIP-0711 n n n n
6 612-TIP-0712 n n n n
7 200-BNC-3100 n n n n n n n n
8 880-BSH-1130 n n n n n n n n
9* 680-ACC-0001 n n n n n n n n
10 682-TUB-6061 n n n n
11 880-HCL-8117 (not shown)
n n n n
12 880-CPL-2500 n n n n
682-
ASY
-071
1
682-
ASY
-071
2
682-
ASY
-071
1P
682-
ASY
-071
2P
682-
ASY
-071
1L
682-
ASY
-071
2L
682-
ASY
-071
1LP
682-
ASY
-071
2PEdge-On Side-Band
Double & Triple Shoot Knife
SIDE-BAND
682-ASY-0711-LEFT
680-ASY-0712-RIGHT
ASSEMBLIES ///
SHOWN
82
3
2
3
1
5
680-ASY-1000 680-ASY-1000P
4
4*
*
11
10
9
1 , 2 , 3 , 4 ,
or5 , 6 , 7 , 8
12
Requires a "O" clamp (695-HCL-1220)
13
SINGLE-SHOOT FRONT DELIVERY, ADVANTAGE SERIES AND TITAN OPENERSEDGE-ON ASSEMBLIES
NOTES: * 680- ACC-0001 required for the Concord only. Not included in the assembly.
NOTE: #Two 880-HCL-0001 are included with the granular openers. They are intended to provide additional security to installed hoses.
PART#
1 682-KNF-2063 n
2 682-KNF-2063M n
3 682-KNF-2063MP n
4 682-KNF-2063P n
5 682-KNF-2064 n n
6 682-KNF-2064M
7 682-KNF-2064MP n
8 682-KNF-2064P n
9 880-BSH-1130 n n n n n n n n
10 682-DEF-1000 n n n n n n n n
11* 680-ACC-0001 n n n n n n n n
12 880-CPL-2500 n n n n
13 695-HCL-1220 (not shown)
n n n n
682-
ASY
-206
3
682-
ASY
-206
4
682-
ASY
-206
3M
682-
ASY
-206
4M
682-
ASY
-206
3P
682-
ASY
-206
4P
682-
ASY
-206
3MP
682-
ASY
-206
4MP
SIDE-BAND
PART#
1 680-HLD-1000 n
2 680-HLD-1000P n
3 880-BSH-1130 n n
4* 680-ACC-0001 n n
5 880-CLP-2500 n
680-
ASY
-100
0
680-
ASY
-100
0P
SINGLE SHOOT680-ASY-1000
682-ASY-2064-RIGHT
682-ASY-2063-LEFT
SHOWN
83
8
1
685-ASY-1801G
2
685-ASY-1801GN
1
685-ASY-1801L6
1
685-ASY-1801N
5
9
10
*11
685-ASY-1801GM
2
1
685-ASY-1801M
4
3
PART#
1 680-HLD-1000 n n n n
2 685-HLD-1010 n n
3 695-SLV-1220 n n
4 685-TUB-1280 n n
5 685-TUB-5025 n n n
6 685-TUB-2565 n
7 880-HCL-8117 (not shown)
n n n n n n
8 880-BSH-1150 n n n
9 200-BNC-3100 n n n n n n
10 200-TIP-0801 n n n n n n
11* 880-HCL-0001 n n n
685-
ASY
-180
1
685-
ASY
-180
1L
685-
ASY
-180
1N
685-
ASY
-180
1M
685-
ASY
-180
1GM
685-
ASY
-180
1GN
3310 & 3320Mid Row Shank
685-ASY-1801
ASSEMBLIES ///
NOTES: * Optional component to help hold Granular hose in place. Use the 680-ACC-0001 when installing on Concord drills - not shown & not included in assembly.
84
8
10
4
11
1
2
9
3
6 5
7
or
3310 Double-Shoot KnifeAustralian
2
5
1
3
4
6 7
8
or
SINGLE-SHOOT FRONT DELIVERY, ADVANTAGE SERIES AND TITAN OPENERSEDGE-ON ASSEMBLIES
PART#
1 628-HLD-5000 n
2 628-TIP-0510 n
3 628-TIP-0512 (not shown)
n
4 628-SBT-2000 n
5 200-BNC-3100 n
6 906-NPT-3135 n
7 620-BLT-3100 n
8 628-BSH-1000 n
628-
ASY
-501
5
NOTES A & B The hose clamp and "O" clamp are not shown in the diagram, but they are required to secure the tubes in place and they are included.
Edge-On Titanwith NH3
PART#
1 628-HLD-5000 n n n
2 628-TIP-0510 n n n
3 620-SSH-1000 n n n
4 200-BNC-3100 n n n
5 906-NPT-3135 n n n
6 620-BLT-3100 n n n
7 628-BSH-1000 n n n
8 628-TUB-1021 n
9 695-TUB-1226 n
10 620-ACC-0001 n n
11 695-SLV-1220 n
A 880-HCL-5610 n n
B 695-HCL-1220 n
628-
ASY
5010
628-
ASY
-502
0M
628-
ASY
-502
0N
628-ASY-5015
628-ASY-5010
628-ASY-5020
85
3 or 4
5
8
6
9
10
7
2or1
SIDE-BAND
Built for Seed Hawk
NOTE: #Two 880-HCL-0001 are included with the granular openers. They are intended to provide additional security to installed hoses.
PART#
1 686-HLD-0711 n n n n
2 686-HLD-0712 n n n n
3 612-TIP-0711 n n n n
4 612-TIP-0712 n n n n
5 200-BNC-3100 n n n n n n n n
6 047-TUB-2540 n n n n
7 612-TUB-6061 n n n n
8 880-CPL-2500 n n n n
9 880-HCL-1828 (not shown)
n n n n n n n n
10 880-HCL-0001 n n n n n n n n
686-
ASY
-071
1G
686-
ASY
-071
2G
686-
ASY
-071
1GP
686-
ASY
-071
2GP
686-
ASY
-071
1L
686-
ASY
-071
2L
686-
ASY
-071
1LP
686-
ASY
-071
2LP
686-ASY-0711-LEFT
686-ASY-0712-RIGHT
ASSEMBLIES ///
Requires Hose Clamp 880-HCL-1828
SHOWN
86
MORRIS CONTOUR IDRILL SPECIFIC
41
2
3
Insert bushing into tip Prior to installing tip
SIDE-BAND
PART#
1 683-HDL-2080 n n n n
2 610-TIP-4081 n n n n
3 200-BNC-3100 n n n n
4 880-HCL-0001 n n n n
5 880-HCL-1828 n n n n
6 880-TUB-1003 n
7 880-TUB-1005 n
8 880-TUB-1001 n
9 880-BSH-1000 n n n
683-
ASY
-408
1
683-
ASY
-408
1L
683-
ASY
-408
1M
683-
ASY
-408
1N
683-ASY-4081
67
8
9
NOTES: #Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses. 880-BSH-1000 is included when ordering 9, 10 and 11
87
MORRIS CONTOUR IIDRILL SPECIFIC
SIDE-BAND
1
2
5
3
Insert bushing into tip (2) Prior to Assembly
PART#
1 693-HDL-2080 n n n n
2 610-TIP-4081 n n n n
3 200-BNC-3100 n n n n
4 880-HCL-1828 n n n n
5 880-HCL-0001 n n n n
6 880-TUB-1001 n
7 880-TUB-1003 n
8 880-TUB-1005 n n
9 880-BSH-1000 n n n
693-
ASY
-408
1
693-
ASY
-408
1L
693-
ASY
-408
1M
693-
ASY
-408
1N67
8
693-ASY-4081
ASSEMBLIES ///
9
NOTES: #Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses. 880-BSH-1000 is included when ordering 9, 10 and 11
88
4
3
1
2
Requires Hose Clamp 880-HCL-81175
PAIRED ROW
PART#
1 683-HLD-2000 n n
2 610-TIP-4041 n n
3 200-BNC-3100 n n
4 683-TUB-6061 n
5 880-HCL-8117 (not shown)
n
683-
ASY
-402
0G
683-
ASY
-402
0L
PART#
1 683-HLD-0711 n n n n
2 683-HLD-0712 n n n n
3 612-TIP-0711 n n n n
4 612-TIP-0712 n n n n
5 200-BNC-3100 n n n n n n n n
6 047-TUB-2540 n n n n
7 612-TUB-6061 n n n n
8 880-HCL-1828 (not shown)
n n n n n n n n
9 880-CPL-2500 n n n n
10 880-HCL-0001 n n n n68
3-A
SY-0
711
683-
ASY
-071
2
683-
ASY
-071
1P
683-
ASY
-071
2P
683-
ASY
-071
1L
683-
ASY
-071
2L
683-
ASY
-071
1LP
683-
ASY
-071
2P
8
2 1
4
9
5
10
76
3
or
or
10
MORRIS CONTOUR IDRILL SPECIFIC
SIDE-BAND683-ASY-0712-RIGHT
683-ASY-0711-LEFT
683-ASY-4020
Requires Hose Clamp 880-HCL-1828
NOTES: #Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.
SHOWN
89
4
3
1
2
Requires Hose Clamp 880-HCL-81175
PAIRED ROW
PART#
1 684-HLD-2000 n n
2 610-TIP-4041 n n
3 200-BNC-3100 n n
4 684-TUB-6061 n
5 880-HCL-8117 (not shown)
n
693-
ASY
-402
0
693-
ASY
-402
0L
PART#
1 693-HLD-0711 n n n n
2 693-HLD-0712 n n n n
3 612-TIP-0711 n n n n
4 612-TIP-0712 n n n n
5 200-BNC-3100 n n n n n n n n
6 047-TUB-2540 n n n n
7 612-TUB-6061 n n n n
8 880-HCL-1828 (not shown)
n n n n n n n n
9 880-CPL-2500 n n n n
10 880-HCL-0001 n n n n
693-
ASY
-071
1
693-
ASY
-071
2
693-
ASY
-071
1P
693-
ASY
-071
2P
693-
ASY
-071
1L
693-
ASY
-071
2L
693-
ASY
-071
1LP
693-
ASY
-071
2P
MORRIS CONTOUR IIDRILL SPECIFIC
SIDE-BANDRequires Hose Clamp 880-HCL-1828
1 2
4
9
5
10
7
6
3
or
or
or
108
693-ASY-0712-RIGHT
693-ASY-0711-LEFT
693-ASY-4020
ASSEMBLIES ///
NOTES: #Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.
SHOWN
90
CASE IH 700, NEW HOLLAND P2060 AND FLEXI-COIL PH5500DRILL SPECIFIC
5 Requires Hose Clamp 880-HCL-81174
13
2
Requires Hose Clamp 880-HCL-1828 8
2 1
4
9
5
7
6
3
or
or
10
PART#
1 694-HLD-0711 n n n n
2 694-HLD-0712 (not shown)
n n n n
3 612-TIP-0711 n n n n
4 612-TIP-0712 n n n n
5 200-BNC-3100 n n n n n n n n
6 047-TUB-2540 n n n n
7 612-TUB-6061 n n n n
8 880-HCL-1828 (not shown)
n n n n n n n n
9 880-CPL-2500 n n n n
10 880-HCL-0001 n n n n
694-
ASY
-071
1G
694-
ASY
-071
2G
694-
ASY
-071
1GP
694-
ASY
-071
2GP
694-
ASY
-071
1L
694-
ASY
-071
2L
694-
ASY
-071
1LP
694-
ASY
-071
2LP
SIDE-BAND
PAIRED ROW
PART#
1 694-HLD-2000 n n
2 610-TIP-4041 n n
3 200-BNC-3100 n n
4 683-TUB-6061 n
5 880-HCL-8117 (not shown)
n
694-
ASY
-402
0G
694-
ASY
-402
0L
694-ASY-0712-RIGHT
694-ASY-0711-LEFT
694-ASY-4020
NOTES: #Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.
SHOWN
91
4
1
2
Requires Hose Clamp 880-HCL-8117 5
CASE IH 800, NEW HOLLAND P2070 AND FLEXI-COIL PH5700DRILL SPECIFIC
1
4
9
7
3 or
10#
Requires Hose Clamp 880-HCL-18288
5
2or
PART#
1 684-HLD-0711 n n n n
2 684-HLD-0712 (not shown)
n n n n
3 612-TIP-0711 n n n n
4 612-TIP-0712 n n n n
5 200-BNC-3100 n n n n n n n n
6 047-TUB-2540 n n n n
7 612-TUB-6061 n n n n
8 880-HCL-1828 (not shown)
n n n n n n n n
9 880-CPL-2500 n n n n
10 880-HCL-0001 n n n n
684-
ASY
-071
1G
684-
ASY
-071
2G
684-
ASY
-071
1GP
684-
ASY
-071
2GP
684-
ASY
-071
1L
684-
ASY
-071
2L
684-
ASY
-071
1LP
684-
ASY
-071
2LP
SIDE-BAND
PAIRED ROW
PART#
1 684-HLD-2000 n n
2 610-TIP-4041 n n
3 200-BNC-3100 n n
4 683-TUB-6061 n
5 880-HCL-8117 (not shown)
n
684-
ASY
-402
0G
684-
ASY
-402
0L
684-ASY-0712-RIGHT
684-ASY-0711-LEFT
684-ASY-4020
ASSEMBLIES ///
3
6
NOTES: #Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.
SHOWN
92
JOHN DEERE 1870DRILL SPECIFIC
1
Requires Hose Clamp 880-HCL-8117
Held With 880-HCL-00013
5
24
PART#
1 650-HDL-1000 n n n
2 650-TUB-1002 n
3 880-HCL-0001 n
4 650-TUB-1003 n
5 880-HCL-8117 n n n
650-
HLD
-100
0L
650-
HLD
-100
0G
650-
HLD
-100
0N
650-HLD-1000
93
HORSCH 84° SHANKDRILL SPECIFIC
4
1
3
2
Requires Hose Clamp 880-HCL-81175
Insert bushing into tip (2) Prior to Assembly
1
2
3
6 78
PART#
1 688-HLD-2000 n n
2 610-TIP-4041 n n
3 200-BNC-3100 n n
4 683-TUB-6061 n
5 880-HCL-8117 n
688-
ASY
-404
1
688-
ASY
-404
1L
PART#
1 688-HLD-2080 n n n n
2 610-TIP-4081 n n n n
3 200-BNC-3100 n n n n
4 880-HCL-1828 n n n n
5 880-HCL-0001 n n n n
6 880-TUB-1001 n
7 880-TUB-1003 n
8 880-TUB-1005 n
9 880-BSH-1000 n n n
688-
ASY
-408
1
688-
ASY
-408
1L
688-
ASY
-408
1M
688-
ASY
-408
1N
688-ASY-4081
688-ASY-4041
ASSEMBLIES ///
5NOTES: 880-BSH-1000 is included when ordering 9, 10 and 11
9
94
SPEED-LOC ™ ADAPTER CHARTFOR NORTH AMERICA & AUSTRALIA
200 SERIES 410 SERIES
MAKE & MODEL SHA
NK
DEG
REE
BO
LT S
IZE
HO
LE C
ENTR
E
200
-QCA
-470
0
200
-QCA
-471
0
200
-QCA
-500
0
200
-QCA
-50
10
100
-WD
G-0
700
410
-QCA
-500
0
410
-QCA
-50
10
400
-WD
G-0
300
400
-WD
G-0
700
AFM180, 200, 250, 880 43° 7/16 1-3/4150, 2300, 310, 300 50° 1/2 2-1/4350 SCARICHISEL 50° 1/2 2-1/4ANDERSONFIELD CULTIVATORS 47° 3/8 1-3/4CHISEL PLOWS 50° 1/2 2-1/4BOURGAULTFIELD CULTIVATORS 6200, 6800, 8800, 8810, 8910 47° 1/2 1-3/4
5710, 5810 AIR DRILL 47° 1/2 1-3/4CHISEL PLOWS 9200, 9400, 9800 50° 1/2 2-1/4
3310, 3320 EDGE-ON (NO ADAPTER FOR THIS APPLICATION)
BRADYFIELD CULTIVATORS 43° 3/8 1-5/8 (NO ADAPTER FOR THIS APPLICATION)
CHISEL PLOWS 50° 7/16 2-1/4BRILLIONHFCT MO 47° 7/16 1-5/8BUSH HOGFIELD CULTIVATORS 47° 3/8 1-3/4CHISEL PLOWS 50° 7/16 2-1/4CASEFC, FCW, FCM, 10, 50, 55, 645 47° 3/8 1-3/44700, 4900, 5000, 645 43° 1/2 2-1/4CASE IH45, 4300, 4500, 4600, 4700, 4800, 4900 47° 7/16 1-3/4
VIBRASHANK 47° 7/16 1-3/4VIBRACHISEL 5600, 5700 43° 1/2 2-1/4
5800, 5850, 5900 50° 1/2 2-1/4PTX 300, PTX 600 50° 1/2 2-1/4ATX AIR DRILL WITH EDGE-ON 84° SHANK
(NO ADAPTER FOR THIS APPLICATION)
ATX 400, 700 AIR HOE DRILL 350 LB OR 550 LB TRIP 50° 1/2 2-1/4
CONCORDC-SHANKS 50° 1/2 2-1/4EDGE-ON SHANKS (NO ADAPTER FOR THIS APPLICATION)
CCIL202, 179, 279, 379 47° 3/8 1-3/4203, 204, 205 43° 1/2 2-1/2806, 807, 808 43° 1/2 2-1/2CHISEL PLOW (THICK SHANK) 50° 7/16 2-1/4
CNH (DMI)FIELD CULTIVATORS 47° 7/16 1-3/4DEGELMANFIELD CULTIVATORS 47° 7/16 1-3/4500 50° 7/16 2-1/43000-2 50° 7/16 2-1/4DEMSTERCHISEL PLOWS 54° 7/16 2-1/4 (NO ADAPTER FOR THIS APPLICATION)
EDWARDSCHISEL PLOWS 50° 7/16 2-1/4FORWARDBOURGAULT TYNE280, 2700, 2800, 8800 47° 1/2 1-3/4FUSION DELTA 47° 1/2 1-3/43000 & 400 SERIES C/P 50° 1/2 2-1/4
200 SERIES 410 SERIES
MAKE & MODEL SHA
NK
DEG
REE
BO
LT S
IZE
HO
LE C
ENTR
E
200
-QCA
-470
0
200
-QCA
-471
0
200
-QCA
-500
0
200
-QCA
-50
10
100
-WD
G-0
700
410
-QCA
-500
0
410
-QCA
-50
10
400
-WD
G-0
300
400
-WD
G-0
700
EZEE-ONFIELD CULTIVATORS 3500, 3550, 5550 47° 1/2 1-3/4
6000 WITH FIELD CULTIVATOR SHANK OPTION 47° 1/2 1-3/4
6000 WITH CHISEL PLOW SHANK OPTION 50° 1/2 2-1/4
ALL CHISEL PLOWS INCLUDING 7450 50° 1/2 2-1/4
7560, 7550 47° 1/2 1-3/4FLEXI-COIL200, 400, 800 47° 7/16 1-3/4300, 340, 600 50° 1/2 2-1/4820 & ST820 WITH 350 LB & 550 LB TRIPS 47° 1/2 1-3/4
820 & ST820 WITH 550 LB & 650 LB TRIPS 50° 1/2 2-1/4
5000 & 7500 DEPENDING ON SHANK OPTION 47° 1/2 1-3/4
5000 & 7500 DEPENDING ON SHANK OPTION 50° 1/2 2-1/4
EDGE-ON (NO ADAPTER FOR THIS APPLICATION)
5000HD & 5500 AIR HOE DRILL 350 LB OR 550 LB TRIP 50° 1/2 2-1/4
FRIGGSTADFIELD CULTIVATORS 47° 7/16 1-3/4CHISEL PLOWS (OLDER MODELS) 50° 7/16 2-1/4
CHISEL PLOWS 50° 1/2 2-1/4GASON5100 SERIES 46° 7/16 1-3/4SCARITILL & EH SCARITILL 47° 1/2 BOTH7100 ECOTILL 50° 1/2 2-1/4GESSNERHR 1200 50° 1/2 2-1/4GLENCOEPC, MPC, PCMW 47° 3/8 1-3/4CHISEL PLOWS 47° 7/16 2-1/4HIGH CLEARANCE 50° 7/16 1-2/4GRAHAMCHISEL PLOWS 50° 1/2 2-1/4400, 500, 1600, 2600 54° 7/16 2-1/4 (NO ADAPTER FOR THIS APPLICATION)
GREAT PLAINS8000, 7000 47° 7/16 1-3/4GYRAL IMPLEMENTSPENETRATOR T23, T25 43° 1/2 BOTHAG BNOSS T30 43° 7/16 BOTHGYSLERCHISEL PLOWS 47° 7/16 2-1/4HESSTONFIELD CULTIVATORS 47° 1/2 1-3/4CHISEL PLOWS 50° 1/2 2-1/4HINIKERFIELD CULTIVATORS 47° 7/16 1-3/4CHISEL PLOWS 50° 1/2 2-1/4HORWOOD BAGSHAW350 SCARIBAR EDGE-ON 47° 1/2 1-3/4HORWARDCHISEL PLOWS** 50° 9/16 2-1/4INTERNATIONAL45, 46, 47 47° 7/16 1-3/410, 50, 55, 75, 509, 645 43° 1/2 2-1/4
* FOR KNIFE OPENERS ONLY
95
REFERENCE ///
200 SERIES 410 SERIES
MAKE & MODEL SHA
NK
DEG
REE
BO
LT S
IZE
HO
LE C
ENTR
E
200
-QCA
-470
0
200
-QCA
-471
0
200
-QCA
-500
0
200
-QCA
-50
10
100
-WD
G-0
700
410
-QCA
-500
0
410
-QCA
-50
10
400
-WD
G-0
300
400
-WD
G-0
700
JANKEUNIV DIRECT DRILL 50° 1/2 2-1/4U/D DRILL (HYD) EARLY 50° 1/2 2-1/4JEOFFROY450 47° 3/8 1-3/4JOHN DEERE1000, 1010, 1050 43° 3/8 1-5/8 (NO ADAPTER FOR THIS APPLICATION)
726, 2210, 2200 47° 7/16 1-3/4940, 960, 985 47° 7/16 1-3/4730 47° 1/2 1-3/4735, 737, 610, 680, 685, 1600, 1610, 1650 50° 1/2 2-1/4
1810, 1820, 1830, 1835 WITH 350 LB TRIPS 47° 1/2 1-3/4
1810, 1820, 1830, 1835 WITH 500 LB TRIPS 50° 1/2 2-1/4
2400, 2410 50° 1/2 2-1/4JOHN SHEARERUNIVERSAL CULTIVATOR 47° 7/16 1-3/4CHISEL PLOWS 50° 1/2 2-1/4KONGSKILDEC-SHANK 47° 1/2 1-3/4S-TINE 47° 7/16 1-5/8KRAUSE600, 900, 3100, 4200 47° 7/16 1-3/44000 50° 1/2 2-1/45630, 5635 47° 1/2 1-3/4LEONCP77 43° 7/16 2-1/4ALL OTHER LEON CHISEL PLOWS 50° 1/2 2-1/4
FIELD CULTIVATORS 47° 7/16 1-3/4MASSEY FERGUSON160 47° 3/8 1-3/4259 47° 7/16 1-3/4124, 125, 126, 128, 133 54° 7/16 2-1/4 (NO ADAPTER FOR THIS APPLICATION)
MF 7300 CHISEL PLOW 50° 1/2 2-1/4MORRISL225, L233, L240, L320 47° 3/8 1-3/4CHALLENGER II, 9000, 9100 47° 1/2 1-3/4
MAXIM, MAXIM II 47° 1/2 1-3/4MAXIM III 47° 1/2 1-3/4CONCEPT 2000 WITH 400 LB TRIP 47° 1/2 1-3/4
CONCEPT 2000 WITH 550 LB TRIP 47° 1/2 1-3/4
CONCEPT 2000 WITH LH 755 LB TRIP 50° 1/2 2-1/4
220, 4, 5, 6, 7 43° 7/16 2-1/4MAGNUM I 43° 1/2 2-1/4912, 8900, 9000, MAGNUM II 50° 1/2 2-1/4MAGNUM III WITH LH 755 LB TRIP 50° 1/2 2-1/4
EDGE-ON (CONTOUR DRILL) (NO ADAPTER FOR THIS APPLICATION)
CHALLENGER L2 480 47° 3/8 1-3/4NEW HOLLANDSD 440A, SD 550A AIR HOE DRILL (DEPENDING ON SHANK OPTION)
47° 1/2 1-3/4
SD 440A, SD 550A AIR HOE DRILL (DEPENDING ON SHANK OPTION)
50° 1/2 2-1/4
200 SERIES 410 SERIES
MAKE & MODEL SHA
NK
DEG
REE
BO
LT S
IZE
HO
LE C
ENTR
E
200
-QCA
-470
0
200
-QCA
-471
0
200
-QCA
-500
0
200
-QCA
-50
10
100
-WD
G-0
700
410
-QCA
-500
0
410
-QCA
-50
10
400
-WD
G-0
300
400
-WD
G-0
700
ST 540 CHISEL PLOW 50° 1/2 2-1/4ST 250 47° 1/2 1-3/4ST 830 WITH 350 LB TRIP 47° 1/2 1-3/4ST 830 WITH 550 LB TRIP (DEPENDING ON SHANK OPTION)
47° 1/2 1-3/4
ST 830 WITH 550 LB TRIP (DEPENDING ON SHANK OPTION)
50° 1/2 2-1/4
ST 830 WITH 650 LB TRIP 50° 1/2 2-1/4P2050, P2060 AIR HOE DRILL 350 LB OR 550 LB TRIP 50° 1/2 2-1/4
NOBLEXR20 50° 7/16 2-1/48000, 4000 MULTI-TOOL 50° 1/2 2-1/4QUINSTARFIELD FINISHER 47° 7/16 1-3/4FALLOW MASTER III 50° 1/2 2-1/4RYAN (RFM)1000 SERIES 47° 7/16 1-3/4SALFORDFIELD CULTIVATOR 47° 7/16 1-3/4SCHULTE1000 SERIES 50° 7/16 2-1/4SMALEMULTIVATOR 47° 7/16 1-3/4CHISEL PLOWS 50° 1/2 2-1/4SUMMERSSUPERCHISEL 50° 1/2 2-1/4SUNFLOWERCHISEL PLOWS 50° 1/2 2-1/45000, 6000, 7000 47° 7/16 1-3/4TAYLORFIELD CULTIVATORS 47° 3/8 1-3/4UNVERFERTHPERFECTA II FIELD CULTIVATORS 47° 7/16 1-3/4
VERSATILEDH730, DH750 WITH 350 LB & 550 LB TRIPS 47° 1/2 1-3/4
C500 WITH 350 LB & 550 LB TRIPS 47° 1/2 1-3/4
C600 WITH 350 LB & 550 LB TRIPS 47° 1/2 1-3/4
C600 WITH 600 LB TRIP 50° 1/2 2-1/4C700 WITH 650 LB TRIP 50° 1/2 2-1/4VICTORYCHISEL PLOWS 50° 1/2 2-1/4WIL-RICHFIELD CULTIVATORS 47° 7/16 1-3/4CHISEL PLOWS (1993 & OLDER) 43° 7/16 2-1/4
CHISEL PLOWS (1994 & NEWER) 50° 1/2 2-1/4
XL2, QX2 47° 7/16 1-3/4YEOMANS GRAHAM HOEMESUS CHISEL PLOWS 50° 1/2 2-1/4
*Sweeps will not work with this combination, knives only. **Bolt sizes will require adapting.
96
BOLT LENGTH CHART
047 Series Bolt-On Sweeps on light- and medium-duty cultivatorsAPPLICATION TOP BOLT BOTTOM BOLT SPECIAL NOTES
1" Bourgault shank without seed boot 1/2" x 2" 1/2" x 2" Plow bolts, no lock washer, regular nut
1" Bourgault shank with Bourgault round tube seed boot 1/2" x 2" 1/2" x 2" Plow bolts, no lock washer, regular nut
1" Bourgault shank with Bourgault square tube seed boot 1/2" x 2-1/4" 1/2" x 2" Plow bolts, no lock washer, regular nut
7/8" Bourgault shank without seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
7/8" Bourgault shank with Bourgault round tube seed boot 1/2" x 2" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
7/8" Bourgault shank with Bourgault square tube seed boot 1/2" x 2-1/4" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
3/4" Bourgault shank without seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
3/4" Bourgault shank with Bourgault round tube seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
3/4" Bourgault shank with Bourgault square tube seed boot 1/2" x 2" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
3/4" Degelman shank without seed boot 7/16" x 1-3/4" 7/16" x 1-3/4" Plow bolts, no lock washer, regular nut
7/8" Flexi-Coil shank without seed boot 7/16" x 1-3/4" 7/16" x 1-3/4" Plow bolts, no lock washer, regular nut
1/2" Morris Challenger shank without seed boot 3/8" x 1-1/2" 3/8" x 1-1/2" Plow bolts, no lock washer, regular nut
5/8" Morris Challenger shank without seed boot 3/8" x 1-1/2" 3/8" x 1-1/2" Plow bolts, no lock washer, regular nut
5/8" John Deere shank without seed boot 7/16" x 1-1/2" 7/16" x 1-1/2" Plow bolts, no lock washer, regular nut
9/16" CIL shank without seed boot 3/8" x 1-1/2" 3/8" x 1-1/2" Plow bolts, no lock washer, regular nut
1/2" Case IH shank without seed boot 7/16" x 1-1/2" 7/16" x 1-1/2" Plow bolts, no lock washer, regular nut
043 & 050 Series Bolt-On Sweeps on heavy-duty chisel plowsAPPLICATION TOP BOLT BOTTOM BOLT SPECIAL NOTES
1" Bourgault shank without seed boot 1/2" X 2" 1/2" X 2" Plow bolts, no lock washer, regular nut
1" Bourgault shank with Bourgault splitter seed boot #6505-42 1/2" X 2-1/4" 1/2" X 2" Plow bolts, no lock washer, regular nut
1-1/4" Bourgault shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plow bolts, no lock washer, regular nut
1-1/4" Bourgault shank with Bourgault splitter seed boot #6505-42 1/2" X 2-1/2" 1/2" X 2-1/4" Plow bolts, no lock washer, regular nut
1" John Deere shank without seed boot 1/2" X 1-3/4" 1/2" X 2" Plow bolts, no lock washer, regular nut
3/4" Degelman shank (50°) without seed boot 1/2" X 1-3/4" 1/2" X 1-3/4" Plow bolts, no lock washer, regular nut
1-1/4" Flexi-Coil shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plow bolts, no lock washer, regular nut
1" Morris shank (43°) without seed boot 1/2" X 2" 1/2" X 2" Plow bolts, no lock washer, regular nut
7/8" Shulte shank without seed boot 1/2" X 2" 1/2" X 2" Plow bolts, no lock washer, regular nut
1-1/4" CIL shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plow bolts, no lock washer, regular nut
1-1/4" IH shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plow bolts, no lock washer, regular nut
3/4" Case IH Vibra shank without seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plow bolts, no lock washer, regular nut
NOTES: 1) All Bourgault sweeps come with 1/2" holes. Shanks with 3/8" and 7/16" holes require special oversize (O/S) head plow bolts. 2) When bolting a seed boot, usually it is the bottom bolt which bolts the seed boot to the shank; the top bolt should remain the same length as listed above. If the seed boot cross section at the point the bolt goes through is 1/8" thick or less, use the same bolt length as above without the lock washer. If the seed boot cross section at the point the bolt goes through is greater than 1/8", increase bolt length by adding the measured cross section of the seed boot at the point the bolt goes through to the above lengths.
97
200 Series QC Adapter – 200-QCA-4700APPLICATION TOP BOLT BOTTOM BOLT SPECIAL NOTES
1" Bourgault shank without seed boot 1/2" x 2-1/4" no lock washer 1/2" x 2-1/4" no lock washer Hex-head bolts
1" Bourgault shank with round tube Bourgault seed boot 1/2" x 2-1/4" no lock washer 1/2" x 2" no lock washer Hex-head bolts, grade 8 required
1" Bourgault shank with square tube Bourgault seed boot 1/2" x 2-1/2" no lock washer 1/2" x 2" no lock washer Hex-head bolts, grade 8 required
7/8" Bourgault shank without seed boot 1/2" x 2" no lock washer 1/2" x 2" no lock washer Hex-head bolts
7/8" Bourgault shank with round tube Bourgault seed boot 1/2" x 2-1/4" no lock washer 1/2" x 2" no lock washer Hex-head bolts, grade 8 required
7/8" Bourgault shank with square tube Bourgault seed boot 1/2" x 2-1/4" no lock washer 1/2" x 2" no lock washer Hex-head bolts, grade 8 required
3/4" Bourgault shank without seed boot 1/2" x 2" no lock washer 1/2" x 2" no lock washer Hex-head bolts
3/4" Bourgault shank with round tube Bourgault seed boot 1/2" x 2" c/w with lock washer 1/2" x 1-3/4" no lock washer Hex-head bolts
3/4" Bourgault shank with square tube Bourgault seed boot 1/2" x 2-1/4" with lock washer 1/2" x 1-3/4" no lock washer Hex-head bolts
3/4" Ezee-On shank without seed boot 7/16" x 1-3/4" 7/16" x 1-3/4" Hex-head bolts (see note 3 below)
7/8" Ezee-On shank without seed boot 7/16" x 2" 7/16" x 2" Hex-head bolts (see note 3 below)
200 Series QC Adapter – 200-QCA-4710APPLICATION TOP BOLT BOTTOM BOLT SPECIAL NOTES
3/4" and 7/8" Flexi-Coil shank without seed boot 7/16" x 2-1/4" no lock washer 7/16" x 2-1/4" no lock washer Plow bolt (see note 2 below)
7/8" Flexi-Coil shank with 5649 seed boot 7/16" x 2-1/2" no lock washer 7/16" x 3-7/8" no lock washer Plow bolt (see note 2 below)
1/2" Morris Challenger shank without seed boot 3/8" x 1-3/4" no lock washer 3/8" x 1-3/4" no lock washer Plow bolt (see note 2 below)
5/8" Morris Challenger shank without seed boot 3/8" x 2" no lock washer 3/8" x 2" no lock washer Plow bolt (see note 2 below)
7/8" Morris shank without seed boot 7/16" x 2-1/4" no lock washer 7/16" x 2-1/4" no lock washer Plow bolt (see note 2 below)
9/16" CIL shank without seed boot 3/8" x 2" no lock washer 3/8" x 2" no lock washer Plow bolt (see note 2 below)
5/8" John Deere shank without seed boot 7/16" x 2" no lock washer 7/16" x 2" no lock washer Plow bolt (see note 2 below)
3/4" Degelman shank 7/16" x 2-1/4" no lock washer 7/16" x 2-1/4" no lock washer Plow bolt (see note 2 below)
9/16" Wil-rich shank without seed boot 1/2" x 2" no lock washer 1/2" x 2" no lock washer Plow bolt
200 Series QC Adapter – 200-QCA-5010APPLICATION TOP BOLT BOTTOM BOLT SPECIAL NOTES
1" shank without seed boot or wedge 1/2" x 2-1/2" with lock washer 1/2" x 2-1/2" with lock washer Plow bolt
1-1/4" shank without seed boot seed boot or wedge 1/2" x 2-3/4" with lock washer 1/2" x 2-3/4" with lock washer Plow bolt
NOTES: 1) Above bolt lengths are determined using prevailing torque side locknuts – grade C. This special locknut is necessary to keep the adapter tight. It is very important to use it, especially in stony or hard ground conditions. 2) Grade 8 bolts are required with the Bourgault 7/8" and 1" shanks where seed boots are involved. If not used, bolt loosening may occur. 3) Shanks with 7/16" holes require the special oversize head hex bolt.
NOTES: 1) Above bolt lengths are determined using prevailing torque side locknuts – grade C. This special locknut is necessary to keep the adapter tight. 2) Shanks with 3/8" and 7/16" holes require special oversize head plow bolts. 3) When bolting a seed boot, usually it is the bottom bolt which bolts the seed boot to the shank; the top bolt should remain the same length as listed above. If the seed boot cross section at the point the bolt goes through is 1/8" thick or less, use the same bolt length as above without the lock washer. If the seed boot cross section at the point the bolt goes through is greater than 1/8", increase bolt length by adding the measured cross section of the seed boot at the point the bolt goes through to the above lengths.
REFERENCE ///
98
BOLT LENGTH CHART
410 Series QC Adapter – 410-QCA-5000APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES
1" Bourgault shank without seed boot 1/2" x 2-1/2" 1/2" x 2-1/2” Hex-head
1" Bourgault shank with Bourgault splitter seed boot 6505-42 1/2" x 2-1/2" 1/2" x 2-3/4" Hex-head
1-1/4" Bourgault shank without seed boot 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-head
1-1/4" Bourgault shank with Bourgault splitter seed boot 6505-42 1/2" x 2-3/4" 1/2" x 3" Hex-head
410 Series QC Adapter – 410-QCA-5010APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES
1" shank without seed boot or wedge 1/2" x 2-1/2" 1/2" x 2-1/2” Hex-head
1-1/4" shank without seed boot or wedge 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-head
600 Series Quick Tip KnivesAPPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES
For 47° and 50° applications, no wedge is needed
1-1/4" Bourgault shank 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-head bolt, regular nut and lock
1" Bourgault shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-head bolt, regular nut and lock
7/8" Bourgault shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-head bolt, regular nut and lock
3/4" Bourgault shank 1/2" x 2-1/4" 1/2" x 2-1/4" Hex-head bolt, regular nut and lock
1-1/4" Flexi-Coil shank 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-head bolt, regular nut and lock
1-1/4" Morris shank 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-head bolt, regular nut and lock (see note 1 below)
1" John Deere shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-head bolt, regular nut and lock
7/8" Shulte shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-head bolt, regular nut and lock
3/4" Degelman shank 1/2" x 2-1/4" 1/2" x 2-1/4" Hex-head bolt, regular nut and lock
For 43° applications, wedge 400-WDG-0700 is required
1" Morris shank for NH3 knives 1/2" x 3" no lock washer 1/2" x 2-3/4" no lock washer Hex-head, regular nut
1" Morris shank for granular knives 1/2" x 3" no lock washer 1/2" x 2-3/4" no lock washer Hex-head, regular nut
1-1/4" CIL shank, 2-1/2" hole centre-to-centre 1/2" x 3-1/4" c/w no lock washer 1/2" x 2-3/4" no lock washer Hex-head, regular nut
1-1/4" IH shank 1/2" x 3-1/4" 1/2" x 3" Hex-head bolt, regular nut and lock (see note 2 below)
3/4" Case IH vibra chisel shank 1/2" x 2-3/4" 1/2" x 2-1/2" Hex-head bolt, regular nut and lock
NOTES: 1) Above bolt lengths are determined using prevailing torque side locknuts – grade C. This special locknut is necessary to keep the adapter tight. 2) When bolting a seed boot, usually it is the bottom bolt which bolts the seed boot to the shank; the top bolt should remain the same length as listed above. If the seed boot cross section at the point the bolt goes through is 1/8" thick or less, use the same bolt length as above without the lockwasher. If the seed boot cross section at the point the bolt goes through is greater than 1/8", increase bolt length by adding the measured cross section of the seed boot at the point the bolt goes through to the above lengths. 3) When bolting an adapter using a wedge, a wedge will only be used when using the 410-QCA-5010 adapter on 43° and 47° chisel plows. Measure the cross section of the wedge at both bolt holes and add this amount to the above numbers. Remember that the measured cross section will be different at each hole in the wedge.
NOTES: 1) Some material may have to be ground off the bottom of the 1-1/4" Morris shank (front face) to get the knife holder to seat down tight against the shank. 2) The 1-1/4" IH shank will fit the NH3 knives, but not the granular knife. 3) All knives come with holes to accommodate 1/2" bolts. If cultivator shanks have 7/16" holes, substitute 7/16" bolts for 1/2" and use a flat washer on the bolt head.
99
FASTENER CHART
DESCRIPTION SIZE PART NUMBER
Lock Washer 1/2" 902-LWS-5000
Nut – Grade 5 3/8" 904-NRG-3754
Nut – Grade 5 7/16" 904-NRG-4374
Nut – Grade 5 1/2" 904-NRG-5004
Lock Nut – Stover 1/4" 906-NPT-2505
Lock Nut – Stover 3/8" 906-NPT-3755
Lock Nut – Stover 7/16" 906-NPT-4375
Lock Nut – Stover 1/2" 906-NPT-5005
Lock Nut – Nylon Insert 1/4" 908-NNI-2504
Screw – Pan Head 3/8" 911-SCR-1038
Screw – Self Drill 1/2" 911-SCR-1051
Plow Bolt – O/S Hd Low Shld 3/8" x 1-1/2" 922-POL-1504
Plow Bolt – O/S Hd Low Shld 3/8" x 1-3/4" 922-POL-1754
Plow Bolt – O/S Hd Low Shld 3/8" x 2" 922-POL-2004
Plow Bolt – O/S Hd 3/8" x 2-1/4" 922-POR-2254
Plow Bolt – O/S Hd Low Shld 7/16" x 1-3/4" 924-POL-1754
Plow Bolt – O/S Hd 7/16" x 2" 924-POR-2004
Plow Bolt – O/S Hd 7/16" x 2-1/4" 924-POR-2254
Plow Bolt – O/S Hd 7/16"x 2-1/2" 924-POR-2504
Plow Bolt – O/S Hd 7/16" x 2-3/4" 924-POR-2754
Plow Bolt – O/S Hd 7/16" x 3" 924-POR-3004
Plow Bolt – O/S Hd 7/16" x 3-7/8" 924-POR-3874
Plow Bolt 1/2" x 1-3/4" 926-PRG-1754
Plow Bolt 1/2" x 2" 926-PRG-2004 Legend: O/S Hd = Oversized Head; Low Shld = Low Shoulder; Shld Blt = Shoulder Bolt
Bolt and Nut Part Numbers
Common Torque Values
DESCRIPTION SIZE PART NUMBER
Plow Bolt 1/2" x 2-1/4" 926-PRG-2254
Plow Bolt 1/2" x 2-1/2" 926-PRG-2504
Plow Bolt 1/2" x 2-3/4" 926-PRG-2754
Plow Bolt 1/2" x 3" 926-PRG-3004
Plow Bolt 1/2" x 3-1/2" 926-PRG-3504
Hex Bolt – O/S Hd Shld Blt 7/16" x 1-3/4" 933-HOS-1754
Hex Bolt – O/S Hd Shld Blt 7/16" x 2" 933-HOS-2004
Hex Bolt 1/4" x 3/4" 942-HRG-0754
Hex Bolt 1/4" x 2" 942-HRG-2004
Hex Bolt 1/2" x 1-3/4" 946-HRG-1754
Hex Bolt – Grade 8 1/2" x 2" 946-HRG-2005
Hex Bolt – Grade 8 1/2" x 2-1/4" 946-HRG-2255
Hex Bolt – Grade 8 1/2" x 2-1/2" 946-HRG-2505
Hex Bolt 1/2" x 2-3/4" 946-HRG-2754
Hex Bolt 1/2" x 3" 946-HRG-3004
Hex Bolt 1/2" x 3-1/4" 946-HRG-3524
Hex Bolt 1/2" x 3-1/2" 946-HRG-3504
Carriage Bolt – Grade 8 3/8" x 2-1/4" 960-CRG-3755
Carriage Bolt – Grade 8 1/2" x 2" 961-CRG-2005
Carriage Bolt – Grade 8 1/2" x 2-1/4" 961-CRG-2255
Carriage Bolt – Grade 8 1/2" x 2-1/2" 961-CRG-2505
All highlighted values are common bolt sizes used for BTT products.
This chart lists some of the more common bolt sizes and their calculated torque values. To ensure proper installation and the integrity of the bolts, it is recommended that you follow these values. We have highlighted some of the more common sizes that our products will use.
USS/SAE Grade 8BOLT DIAMETER WRENCH SIZE TORQUE DRY FT. LBS. LUBRICATED FT. LBS.
1/4" 7/16" 12 9
5/16" 1/2" 24 18
3/8" 9/16" 45 35
7/16" 5/8" 70 50
1/2" 3/4" 110 80
9/16" 13/16" 150 110
5/8" 15/16" 210 160
3/4" 1-1/8" 380 280
7/8" 1-5/16" 600 450
1" 1-1/2" 910 680
REFERENCE ///
100
DEALERS
ALBERTAATHABASCADEERLAND EQUIPMENT (780) 675-2256
BARRHEADMARTIN DEERLINE (780) 674-2213
BEAVERLODGEFOSTER’S AGRI-WORLD (780) 354-3622
BOW ISLANDROCKY MOUNTAIN EQUIPMENT (403) 545-6844
BROOKS BROOKS FARM CENTER (403) 362-8222
CAMROSEAGRITERRA EQUIPMENT (780) 672-2452
CONSORTTRI-AG IMPLEMENTS LTD. (403) 577-3899
CORONATION CERVUS EQUIPMENT (403) 578-3744
CORONATIONFUTURE AG INC. (403) 578-3747
DRUMHELLERROCKY MOUNTAIN EQUIPMENT (403) 823-2626
FALHERMARTIN DEERLINE (780) 837-2267
FALHERROCKY MOUNTAIN EQUIPMENT (780) 837-4691
FORT SASKATCHEWANDEERLAND EQUIPMENT (780) 998-3249
GRANDE PRAIRIEDOUGLAS LAKE EQUIPMENT LTD. (780) 532-5344
GRIMSHAWROCKY MOUNTAIN EQUIPMENT (780) 332-4691
HIGH PRAIRIEMARTIN DEERLINE (780) 526-4431
HIGH RIVERROCKY MOUNTAIN EQUIPMENT (403) 652-7944
LA CRETEPRAIRIE COAST EQUIPMENT (780) 928-3337
LETHBRIDGEROCKY MOUNTAIN EQUIPMENT (403) 327-3154
LOUGHEEDAGRITERRA EQUIPMENT (780) 386-3755
MEDICINE HATROCKY MOUNTAIN EQUIPMENT (403) 528-3838
MILK RIVERROCKY MOUNTAIN EQUIPMENT (403) 647-3828
OLDSFUTURE AG INC. (403) 556-6711
OYENROCKY MOUNTAIN EQUIPMENT (403) 664-3730
PICTURE BUTTEROCKY MOUNTAIN EQUIPMENT (403) 732-5658
PINCHER CREEK CERVUS EQUIPMENT (403) 627-4451
RED DEERFUTURE AG INC. (403) 343-6101
RIMBEYFUTURE AG INC. (403) 843-2205
ROCKYFORDK. PEDERSEN EQUIPMENT LTD. (403) 533-3757
ROCKYVIEW COUNTYROCKY MOUNTAIN EQUIPMENT (403) 513-7000
SEDALIASEDALIA CONSUMER’S CO-OP (403) 326-2152
SPIRIT RIVERDAVE ROSS EQUIPMENT LTD. (780) 864-3731
ST. PAULTRI-AG IMPLEMENTS LTD. (780) 645-4465
STETTLERFUTURE AG INC. (403) 742-3740
STONY PLAINAGRITERRA EQUIPMENT (780) 963-2251
TABERROCKY MOUNTAIN EQUIPMENT (403) 223-2333
THORSBYTHORSBY FARM CENTRE (780) 789-3989
TROCHUCERVUS EQUIPMENT (403)-442-3982
VEGREVILLEROCKY MOUNTAIN EQUIPMENT (780) 632-6677
VERMILLIONIRELAND FARM EQUIPMENT LTD. (780) 853-6344
VULCAN ARMAN EQUIPMENT SALES INC. (403) 485-6968
WAINWRIGHTTRI-AG IMPLEMENTS LTD. (780) 842-4408
WASKATENAU WASKATENAU MOTORS (780) 358-2287
WESTLOCKMARTIN DEERLINE (780) 349-3391
WESTLOCKROCKY MOUNTAIN EQUIPMENT (780) 349-3720
WETASKIWINHI LINE FARM EQUIPMENT LTD. (780) 352-9244
BRITISH COLUMBIADAWSON CREEKDOUGLAS LAKE EQUIPMENT LTD. (250) 782-5281
ROLLAROLLA AGRICULTURE SERVICES (250) 759-4770
MANITOBAALTONAGREENVALLEY EQUIPMENT INC. (204) 324-6456
ARBORGSHACHTAY SALES & SERVICE LTD. (204) 376-5233
BOISSEVAINROCKY MOUNTAIN EQUIPMENT (204) 534-2463
BRANDONENNS BROTHERS LTD. (204) 728-7043
BRANDONMAZERGROUP LTD. (204) 728-2244
BRANDONROCKY MOUNTAIN EQUIPMENT (204) 725-2273
CARMANGREENLAND EQUIPMENT LTD. (204) 373-5614
DAUPHINREIT-SYD FARM EQUIPMENT (204) 638-6443
ELIECHABOT IMPLEMENTS CO. LTD. (204) 353-2392
KILLARNEYGREENVALLEY EQUIPMENT INC. (204) 523-7571
KILLARNEYROCKY MOUNTAIN EQUIPMENT (204) 523-4644
MANITOUA.R.K. NEW-TECH LTD. (204) 242-2424
MELITAD.B. MURRAY LTD. (204) 522-3341
MORDENGREENVALLEY EQUIPMENT INC. (204) 325-7742
NEEPAWACHABOT IMPLEMENTS CO. LTD. (204) 476-3333
NEEPAWAMAZERGROUP LTD. (204) 476-2364
PORTAGE LA PRAIRIECHABOT IMPLEMENTS CO. LTD. (204) 857-9397
PORTAGE LA PRAIRIEMAZERGROUP LTD. (204) 857-8711
ROBLINMAZERGROUP LTD. (204) 937-2134
ROSENORTROSENORT MOTORS (1979) LTD. (204) 746-8441
RUSSELLROCKY MOUNTAIN EQUIPMENT (204) 773-2644
SHOAL LAKEMAZERGROUP LTD. (204) 759-2126
SHOAL LAKEROCKY MOUNTAIN EQUIPMENT (204) 759-2424
SHOAL LAKES.H.DAYTON LTD. (204) 759-2065
STEINBACHCHABOT IMPLEMENTS CO. LTD. (204) 326-6417
STEINBACHSOUTHEASTERN FARM EQUIPMENT LTD. (204) 326-9834
SWAN RIVERMAZERGROUP LTD. (204) 734-9361
SWAN RIVERNYKOLAISHEN FARM EQUIPMENT LTD. (204) 734-3466
TREHERNEGREENVALLEY EQUIPMENT INC. (204) 723-2546
VIRDENMORRIS SALES & SERVICE LTD. (204) 748-2408
WINNIPEGLEO’S SALES AND SERVICE LTD. (204) 694-4978
SASKATCHEWANARCHERWILLARCHERWILL CO-OPERATIVE ASSOICATION LTD. (306) 323-2112
ASSINIBOIAE. BOURASSA & SONS (306) 642-3826
ASSINIBOIAYOUNG’S EQUIPMENT (306) 642-5991
AVONLEANELSON MOTORS & EQUIPMENT (1976) (306) 868-2022
BALCARRESMAPLE FARM EQUIPMENT (306) 334-2492
BATTLEFORDKRAMER LTD. (306) 445-6151
BIGGARWESTERN SALES INC. (306) 948-3909
BROWNLEEBROWNLEE FARM EQUIPMENT LTD. (306) 759-2002
CARROT RIVERCARROT RIVER IMPLEMENTS (306) 768-2715
CENTRAL BUTTEWESTERN SALES INC.(306) 796-4320
CHAMBERLAINYOUNG’S EQUIPMENT(306) 638-6305
CHOICELANDPINELAND CO-OP (306) 428-2175
DAVIDSONYOUNG’S EQUIPMENT (306) 567-3074
ELROSEWESTERN SALES INC. (306) 378-2575
EMERALD PARKMARKUSSON NEW HOLLAND OF REGINA LTD. (306) 781-2828
EMERALD PARKNICK’S SERVICE LTD. (306) 781-1077
ESTEVANE. BOURASSA & SONS (306) 634-9444
ESTEVANNELSON MOTORS & EQUIPMENT (1976) (306) 634-6422
ESTEVANREDHEAD EQUIPMENT LTD. (306) 634-4788
ESTONOWENS & SWEITZER 1972 LTD. (306) 962-3637
FOAM LAKEMAPLE FARM EQUIPMENT (306) 272-3345
GRAVELBOURGL & L AUTO & AG SUPPLIES (306) 648-3622
HUDSON BAYPARKLAND CO-OP ASSOCIATION (306) 865-2932
HUMBOLDTHERGOTT FARM EQUIPMENT (306) 682-2591
KAMSACKNYKOLAISHEN FARM EQUIPMENT LTD. (306) 542-2411
KINDERSLEYMOODY’S EQUIPMENT (306) 463-2335
KINISTINOAG WORLD EQUIPMENT (306) 864-2200
KINISTINOFARM WORLD EQUIPMENT (306) 864-3667
LEADERJAY DEE AGTECH (306) 628-3889
LLOYDMINSTERMOODY’S EQUIPMENT (306) 825-6141
MAPLE CREEKTERNES SALES & SERVICE LTD. (306) 662-4444
MEADOW LAKELAZAR EQUIPMENT LTD. (306) 236-5222
MELFORTCERVUS EQUIPMENT (306) 752-9344
MOOSE JAWROBERTSON IMPLEMENTS (1988) LTD. (306) 692-7844
MOOSE JAWYOUNG’S EQUIPMENT (306) 694-1800
MOOSOMINROCKY MOUNTAIN EQUIPMENT (306) 435-3866
NAICAMCROPPER MOTORS (306) 874-2011
NIPAWINPINELAND CO-OP (306) 862-4595
NORTH BATTLEFORDNORSASK FARM EQUIPMENT LTD. (306) 445-8128
OUTLOOKJOHN BOB FARM EQUIPMENT LTD. (306) 867-9544
OUTLOOKWESTERN SALES INC. (306) 867-8601
OXBOWNELSON MOTORS & EQUIPMENT (1976) (306) 483-5115
PANGMANE. BOURASSA & SONS (306) 442-2033
PARADISE HILLNOVLAN BROTHERS & SALES (306) 344-2029
PERDUEMOODY’S EQUIPMENT (306) 237-4272
PONTEIXTHIBAULT’S AUTO PARTS PLUS (306) 625-3355
PORCUPINE PLAINPARKLAND CO-OP ASSOCIATIONS LTD. (306) 278-2191
PREECEVILLEMAPLE FARM EQUIPMENT (306) 547-2007
PRINCE ALBERTCERVUS EQUIPMENT (306) 763-6686
PRINCE ALBERTFARM WORLD EQUIPMENT (306) 922-2525
RADVILLEE. BOURASSA & SONS (306) 869-2277
RADVILLENELSON MOTORS & EQUIPMENT (1976) (306) 869-3000
RAYMORERAYMORE NEW HOLLAND (306) 746-2911
RAYMOREYOUNG’S EQUIPMENT (306) 746-2288
REDVERSNELSON MOTORS & EQUIPMENT (1976) (306) 452-3418
REGINAYOUNG’S EQUIPMENT (306) 565-2405
ROSETOWNWESTERN SALES INC. (306) 882-4291
SASKATOONCERVUS EQUIPMENT (306) 933-3303
SASKATOONMOODY’S EQUIPMENT (306) 934-4686
SHAUNAVONROBERTSON IMPLEMENTS (1988) LTD. (306) 297-4131
SHAUNAVONSHAUNAVON INDUSTRIES (1980) LTD. (306) 297-2630
SPIRITWOODMARTODAM MOTORS (1983) LTD. (306) 883-2045
ST. BRIEUXCOQUET & BOURGAULT IMPLEMENTS (306) 275-2050
SWIFT CURRENTJAY DEE AGTECH (306) 773-9351
SWIFT CURRENTREDHEAD EQUIPMENT LTD. (306) 773-2951
SWIFT CURRENTROBERTSON IMPLEMENTS (1988) LTD. (306) 773-4948
TISDALEJOHN BOB FARM EQUIPMENT LTD. (306) 873-4588
UNITYMOODY’S EQUIPMENT 306) 228-2686
WADENAWHEATBELT SALES LTD. (306) 338-2588
WATROUSYOUNG’S EQUIPMENT (306) 946-3387
WEYBURNE. BOURASSA & SONS (306) 842-6626
WEYBURNYOUNG’S EQUIPMENT (306) 842-2629
WINDTHORSTYOUNG’S EQUIPMENT (306) 224-2110
WYNYARDMAPLE FARM EQUIPMENT (306) 554-2536
YORKTONMAPLE FARM EQUIPMENT (306) 783-9459
COLORADOOTISPRO TILL (970) 466-0721
IDAHOMOSCOWST. JOHN HARDWARE & IMPLEMENT (208) 882-7501
ILLINOISTAYLORVILLEKUHNS EQUIPMENT COMPANY (217) 824-8146
KANSASKALVESTAKALVESTA IMPLMENET COMPANY (620) 855-3567
RUSSELLRADKE IMPLEMENT INC. (620) 935-4310
TOPEKAINTERSTATE FARM PRODUCTS (785) 233-0869
MINNESOTAADATITAN MACHINERY INC. (218) 784-2321
CROOKSTONVALLEY PLAINS EQUIPMENT (218) 281-3683
ELBOW LAKETITAN MACHINERY INC. (218) 685-4467
GLYNDONBUFFALO RIVER SALES (218) 498-2800
HILLSDAVES REPAIR (507) 962-3631
ROSEAUTITAN MACHINERY INC. (218) 463-1781
THIEF RIVER FALLSNELSON EQUIPMENT OF TRF INC. (218) 681-1997
THIEF RIVER FALLSTITAN MACHINERY INC. (218) 681-1423
MISSOURIMEXICOSYDENSTRICKER IMPLEMENT CO. (573) 581-5900
TIPTONSYDENSTRICKER IMPLEMENT CO. (660) 433-5596
101
MONTANABILLINGSTORGERSON’S LLC (406) 252-8614
CHINOOKRAINBOW IRRIGATION & EQUIPMENT (406) 357-2211
CIRCLEFARM EQUIPMENT SALES INC. (406) 485-2145
CONRADFRONTLINE AG (406) 278-5531
CULBERTSONFARM EQUIPMENT SALES INC. (406) 787-6201
CUT BANKFRONTLINE AG (406) 873-5505
ETHRIDGETORGERSON’S LLC (406) 434-2222
GLASGOWFARM EQUIPMENT SALES INC. (406) 228-2496
GREAT FALLSHOVEN EQUIPMENT COMPANY (406) 727-7153
GREAT FALLSTORGERSON’S LLC (406) 453-1453
HAVRETILLEMAN MOTOR CO. (406) 265-7865
HAVRETORGERSON’S LLC (406) 265-5887
HYSHAMTORGERSON’S LLC (406) 342-5571
LEWISTONTORGERSON’S LLC (406) 538-8795
PLENTYWOODFARM EQUIPMENT SALES INC. (406) 765-1531
SIDNEYSUNRISE EQUIPMENT CO. (406) 488-3112
NORTH DAKOTABEACHWEST PLAINS INC. (701) 872-4154
BOWMANWEST PLAINS INC. (701) 523-3296
CALVINFARMER’S UNION OIL COMPANY OF CALVIN (701) 697-5208
CARRINGTONERICKSON IMPLEMENT INC. (701) 652-2821
CASSELTONTITAN MACHINERY INC. (701) 347-4671
DEVIL’S LAKEHIGH PLAINS EQUIPMENT (701) 662-7522
DEVIL’S LAKELEADING EDGE EQUIPMENT (701) 662-4948
DICKINSONDAKOTA FARM EQUIPMENT INC. (701) 225-8123
DICKINSONWEST PLAINS INC. (701) 483-8741
HARVEYHIGH PLAINS EQUIPMENT (701) 324-2255
HETTINGERWEST PLAINS INC. (701) 567-4505
HOOPLEBUTLER MACHINERY CO. (701) 894-6363
JAMESTOWNTITAN MACHINERY INC. (701) 252-8200
KULMTITAN MACHINERY INC. (701) 647-2442
LANGDONFARMER’S UNION OIL COMPANY OF LANGDON (701) 256-5531
LANGDONSIMPLOT SOILBUILDERS 701) 256-2815
LISBONBERUBES INC. (701) 683-4195
MANDANNORTHERN PLAINS EQUIPMENT CO. INC. (701) 663-9864
MINOTFARMER’S UNION OIL COMPANY (ENERBASE) (701) 852-2501
MOHALLGREEN AG SERVICES (701) 756-6050
ROLETTEFARMER’S UNION OIL COMPANY OF ROLETTE (701) 246-3493
SAWYERHAUSER’S FARM SUPPLY (701) 624-5310
STANLEYBORDER PLAINS EQUIPMENT (701) 628-2950
VALLEY CITYA P EQUIPMENT (701) 845-2143
WAHPETONTITAN MACHINERY INC. (701) 642-8424
WASHBURNR D O EQUIPMENT (701) 462-3284
WILLISTONBOLDT FARM SUPPLY (701) 774-3739
WILLISTONBORDER PLAINS EQUIPMENT (701) 774-0957
NEBRASKAKIMBALLBRIGHTON EQUIPMENT (308) 235-3683
SCOTTSBLUFFFRANK IMPLEMENT COMPANY (308) 632-4440
OKLAHOMAENIDENID NEW HOLLAND (580) 234-2668
SOUTH DAKOTAHURONPREMIER EQUIPMENT LLC (605) 352-7100
ONIDALAMB’S CHEVORLET & IMPLEMENT (605) 258-2661
REDFIELDTITAN MACHINERY INC. (605) 472-0810
TEXASWINTERSMILTON’S HARDWARE & AUTO SUPPLY (325) 754-4578
WASHINGTONAIRWAY HEIGHTSST. JOHN HARDWARE & IMPLEMENT (509) 244-4902
FAIRFIELDST. JOHN HARDWARE & IMPLEMENT (509) 283-2111
ROSALIAJERRY’S FARM SUPPLY (509) 523-3276
SPOKANESPRAY CENTER ELECTRONICS INC. (509) 838-2209
TEKOAWILBUR-ELLIS COMPANY (509) 284-6501
WISCONSINLA CROSSETITAN MACHINERY INC. (608) 788-1025
WYOMINGCHEYENNE4 RIVERS EQUIPMENT (307) 638-8669
EUROPEAN DISTRIBUTORSIndustriehof GmbHIm Winkel 5 D-30900 Wedemark Germany Phone: +49 (0) 5130-6072-0www.industriehof.com
Martin Lishman Ltd. Unit 2B, Roman Bank, Bourne, Lincs PE10 9LQ UK Phone: +44 (0) 1778 426600 www.martinlishman.com
UNITED STATES DISTRIBUTORUS Manufacturing Inc.1707 21st Street Eldora, IA 50627 Toll-free: 800-800-1812 Fax: 641-939-7539
AUSTRALIAN DISTRIBUTORSBourgault Industries Pty Ltd.16 Eliot Road Armadale, WA 6112 Australia Phone: 08 9399 9700
NEW SOUTH WALESCOLEAMBALLYHUTCHEON A & G 02 6954 4280
CONDOBOLINHUTCHEON & PEARCE 02 6895 2666
COONAMBLECHESTERFIELD AUSTRALIA 02 6822 5111
COROWAO’CONNORS 02 6033 1666
COWRAHUTCHEON & PEARCE 02 6341 4800
DUBBOCHESTERFIELD AUSTRALIA 02 6885 3300
FORBESMCCLINTOCK & CO. 02 6852 1200
GRENFELLMCCLINTOCK & CO. 02 6343 1422
GRIFFITHA & G MACHINERY 02 6964 3422
LAKE CARGELLIGOA & G MACHINERY 02 6898 1305
MOREESUSTAIN AG 02 6752 1622
NARRANDERAHUTCHEON A & G 02 6959 1522
PARKESHUTCHEON & PEARCE 02 6862 1666
TEMORAHUTCHEON & PEARCE 02 6977 1100
WAGGA WAGGAHUTCHEON & PEARCE 02 6933 7900
WARRENCHESTERFIELD AUSTRALIA 02 6847 3522
WELLINGTONCHESTERFIELD AUSTRALIA 02 6845 1666
WYALONGWYALONG MACHINERY & ENGINEERING 02 6972-4555
SOUTH AUSTRALIABORDERTOWNO’CONNORS 08 8752 1311
CEDUNACEDUNA MACHINERY 08 8625 2999
CLAREWSB DISTRIBUTORS 08 8842 2177
CLEVEPRINGLES AG PLUS CROUCH RURAL 08 8628 2150
CRYSTAL BROOKPRINGLES AG PLUS CROUCH RURAL 08 8636 2257
CUMMINSPRINGLES AG PLUS CROUCH RURAL 08 8676 2105
KADINAMEASEDAY'S SERVICES 08 8828-0200
KIMBAPRINGLES AG PLUS CROUCH RURAL 08 8627 2071
LYNDOCHLYNDOCH MOTORS 08 8524 4140
MAITLANDEGLINTON BROS. 08 8832 2277
MURRAY BRIDGERAMSEY BROS. 08 8531 2244
PARINGAHOODS AGRIMOTIVE 08 8595 5388
PINNAROOPARK MOTORS 08 8577 8141
WUDINNAPRINGLES AG PLUS CROUCH RURAL 08 8680 2236
VICTORIABIRCHIPO'CONNORS 03 5492 2311
DELACOMBEWESTAG 03 5335 8609
HORSHAMO'CONNORS 03 5382 1727
MILDURAHAEUSLER FARM SUPPLIES 03 5055 0600
SEA LAKEHAEUSLER FARM SUPPLIES 03 5070 3400
SHEPPARTONO’CONNORS 03 5821 4555
SWAN HILLSUNRISE AG 03 5032-0099
WARRACKNABEALO'CONNORS 03 5398 1877
WESTERN AUSTRALIAALBANYRATTEN & SLATER 08 9842 8529
BOYUP BROOKGREENLINE AG 08 9765 1305
CARNAMAHAFGRI EQUIPMENT 08 9951 1130
CUNDERDINAG IMPLEMENTS 08 9635 1364
DALWALLINUJOLLY & SONS 08 9661 1105
ESPERANCEPH KERR & CO. 08 9071 3711
GERALDTONAFGRI EQUIPMENT 08 9921 5044
GNOWANGERUPRATTEN & SLATER 08 9827 1207
GUILDFORDGREENLINE AG 08 9478 5099
LAKE GRACEGREENLINE AG 08 9865 1100
MERREDINAG IMPLEMENTS 08 9041 4100
MOORAAFGRI EQUIPMENT 08 9651-1363
MUKINBUDINAG IMPLEMENTS 08 9047 1109
NAREMBEENAG IMPLEMENTS 08 9064 7214
NARROGINGREENLINE AG 08 9881 4250
NORTHAMAG IMPLEMENTS 08 9622 5855
PINGELLYGREENLINE AG 08 9887 1395
SOUTHERN CROSSAG IMPLEMENTS 08 9049 1104
WAGINGREENLINE AG 08 9861-0000
WONGAN HILLSJOLLY & SONS 08 9671 1311
WYALKATCHEMJOLLY & SONS 08 9681-1477
AUSTRALIAN DEALERS
REFERENCE ///
Cornelius ChomenchukAssistant Sales Manager/ Manitoba Territory Manager
Mel TaylorMarketing Manager
Roger SchiermanAlberta Territory Manager
Len HorvathService and Warranty Manager
Kelly StevensonSaskatchewan Territory Manager
Dean BigelowR&D Manager
Tom ClementsNorth & South Dakota, Montana, Minnesota Territory Manager
Marissa PappenfootInside Sales/Administrative Coordinator
Patrick YeagerManaging Director of Sales and Marketing
CONTACT US
P.O. Box 310, 200 – 5th Avenue South St. Brieux, SK, Canada S0K 3V0
P: 1.800.878.7714F: 1.306.275.4720E: [email protected]
www.tillagetools.com
/tillagetools @TillageTools
102
BOURGAULTT I L L A G E T O O L S
F. P. Bourgault Tillage Tools Ltd.P.O. Box 310, 200 – 5th Avenue South
St. Brieux, SK, Canada S0K 3V0
P: 1.800.878.7714 | F: 1.306.275.4720www.tillagetools.com
Prin
ted
in C
anad
a