© 2007
MMultigas Detectorultigas Detector
Reliability in a small package
What It IsWhat It Is
Personal 4-gas monitorDetects O2, H2S, CO and combustible gas
Rechargeable Li-polymer battery
Standard:Event log
Full data log
Vibrating alarm
What It Is What It Is NotNot
Not to detect NO2
Or other ‘exotic’ gases
No alkaline optionRuns for >16 hrs!
No built-in pump optionUse ALTAIR 5
No multi-languageIcon-driven, use ALTAIR 5
Small Small SizeSize
Small, unobtrusive, lightweight design
Easy to wear all day
Alarms visible from 360º
Fits in gloved hand
One-handed operation
Robust construction
Rugged DesignRugged Design
Over-molded case design
Built-in rubberized armor
Impact shock protectionEasily survives a 10-ft drop
Easy to grasp and hold
Sealed against water & dust ingress to IP67
Third-party tested
Dunk it in a bucket!
Multiple AlarmsMultiple Alarms
95+ dB horn typical
Multiple, alternating high-intensity alarm LEDsOn top and bottom of the unit!
Vibrating alarm is standard on all models
‘InstantAlert’ feature is standardActivates all alarms when desired
Optional, unique to gas detection, ‘MotionAlert’ feature
If no motion is detected for 30 sec. alarm sounds to alert others
Ideal for confined space entry
Provides ConfidenceProvides Confidence
Confidence signalGreen blinking ‘Safe LED’Vibrating pulseConfidence beep every
30 sec. to ensure operation
Can be turned offSet-up mode
Advanced FeaturesAdvanced Features‘MotionAlert’ feature
Indicates “Man Down”
‘InstantAlert’ featureActivates all alarms when desired
Most rugged instrument in its class
Easily passes multiple 10 ft drops
IP67 rated by 3rd partyWater and dust tight
Bump check mark (24 hrs)Ensures instrument was successfully tested
Advanced FeaturesAdvanced Features‘Safe LED’
Ensures instrument is operating safely
Missing sensor alarmHelps prevent mistakes after service
Password-protected setup modeControls unauthorized access
Event & data log >500 events
MSA Link-readyMulti-language PC software to access records and change settings
BatteryBattery
Li-polymer technology
Virtually no memory effects
Holds charge better
Runs >16 hoursNo need for expensive alkalines!
Cost of alkaline batteries5 days/week x 50 weeks = 250 days
250 x $3 = $750/year!! + labor
Many MarketsMany MarketsOil and Gas ChemicalFireUtilitiesAgricultureConstructionSteelWaterVarious Industrial Applications
Start UpStart UpOperation is similar to the Solaris:
Performs diagnostic self-checkDisplay3 alarmsMissing sensors
Displays:Instrument nameSoftware versionCombustible gas typeToxic units (ppm or mg/m3)Alarm set points (Low, High, STEL, TWA)
Start Start UpUp
Displays expected cal. gas concentrations
Shows current time and date
Indicates last successful cal. date
Indicates next cal. date (if activated)
Shows measurement countdown
Offers fresh air setup option
Defaults to measurement page
PagesPagesMeasurement (default)BumpPeak readingsMinimum oxygen readingSTEL for toxics (if activated)TWA for toxics (if activated)TimeDate‘MotionAlert’ (if equipped and enabled)
Data LogData LogEvent logging (500 events)
Gas and battery alarmsCal. and bump recordsBattery voltageFAS, re-zeroings, calibrationsReset of TWA, STEL and Peak
Gas records(>50 hours)
ReadingTime and datePeak, Min, AverageTemperature
Graphs & tables
Infrared-based ‘MSA Link’- compatible
Change instrument settingsLast successful calibration date
Set UpSet Up
Password-protected access
Change:Individual sensor channels Combustible gas typeAutoCal. valuesCal. due on/offAlarm set pointsLow, High, STEL, TWADateTime
Other settings through MSA Link
Multi-language
CalibrationCalibration
“Single Button AutoCal” basedAccess can be password protected
Same Solaris calibration cylinders1.45% CH4
60 ppm CO15% O2
20 ppm H2S10048280 (34L)10045035 (58L)
CalibrationCalibration
1. Press and hold ‘Reset’ button
2. Instrument prompts user to “Zero Cal?”
3. Press ‘On/Off’ to accept & initiate zero functionOr press ‘Reset’ to cancel function
4. Unit will automatically zero sensors‘Zero pass’
5. Instrument prompts user to “Span Cal?”
6. Attach cal. cap & flow cal. gas to instrument
7. Press ‘On/Off’ to accept & initiate spanOr press ‘Reset’ to cancel function
8. Unit will automatically span sensors
AccessoriesAccessories
Galaxy Automated Calibration System
Bump test and calibrationRecord keeping
QuickCheck (Q1 2008)Bump test onlyRecords activities
Charging cradle
Universal pump probe
Low-MaintenanceLow-Maintenance
Low level of end-user maintenance required:
Separate sensors
Sensor replacement kit
Filter, gasket, etc. kit
Front case with built-in filter
Battery and electronics
Most components available as replacement parts
WarrantyWarranty
Standard 2-year comprehensive warranty Sensors Electronics Battery
Optional extended warranty1 year extra2 years extraPart of ATO!
Questions?Questions?
Thanks!Thanks!