2018 catalog Laser Precitec Talas 2018.pdf · 2019. 9. 30. · PT348-1053 AL380 P0571-1051-00001, 6930281333 PT-Nozzle holder KT B2 Con 1 2 PT348-1330 Recommended AL131 281330, P0571-260-00001,

2018 catalogFor CO2 and fiber laser consumablesReplacement parts suitable for Precitec®

1

Centricut delivers • OEM quality nozzles, ceramics and optics

• Technical and application support from our OEM-trained technicians

• 100% satisfaction guarantee

2

CO2 and fiber laser nozzles

CP (chrome plated)

Nozzles plated with chrome for increased durability. These nozzles are easier to clean, resist damage due to ‘tip-ups’ and have better spatter resistance over non-plated nozzles. For use in all laser cutting applications.

Conical Conical internal geometry for high pressure, non-ferrous cutting applications using nitrogen, air or argon.

Cylindrical Cylindrical internal geometry for low pressure, mild steel cutting applications using oxygen.

Double Insert pressed into a standard cylindrical nozzle for improved edge quality, laminar gas flow and spatter resistance. Primarily used in mild steel applications.

HCP (hard chrome plated)

Enhanced durability chrome plated nozzles. These nozzles are easier to clean, resist damage due to ‘tip-ups’ and have better spatter resistance over non-plated nozzles. For use in all laser cutting applications.

HP (high pressure) HD (high density) Conical style nozzle for high pressure, non-ferrous cutting applications using nitrogen, air or argon.

Inner Also referred to as a ‘nozzle insert’. Works in conjunction with an outer nozzle to create a double nozzle. Primarily used in mild steel applications.

Low pressure Cylindrical style nozzle for low pressure, mild steel cutting applications using oxygen.

Outer Works in conjunction with an inner nozzle to create a double nozzle. Primarily used in mild steel applications.

Shower Nozzles with a center orifice surrounded by smaller jets. The smaller jets focus the assist gas into the kerf, creating improved edge quality and the ability to cut thicker material. Primarily used in mild steel applications.

Nozzle optionsAll Centricut nozzles are engineered and manufactured to the highest standards. Select the OEM quality nozzle best suited for your application needs

CopperMost commonly used nozzle offering good durability and nozzle life. Primary nozzle type for fiber lasers.

Chrome platedShiny, mirror-like finish provides increased spatter resistance, improved durability and longer life than copper nozzles. Not recommended for use on fiber lasers.Look for CP in the part number to identify a chrome plated nozzle

Hard chrome platedPremium nozzles offering the highest level of durability and longest nozzle life. These nozzles are not as shiny as chrome plated and have a dull appearance. Not recommended for use on fiber lasers.Look for HCP in the part number to identify a hard chrome nozzle.

3

Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.

Optics keyLens

MEN Meniscus

PLX Plano-convex

MTD Mounted

Not MTD Not mounted

PO Plano

MP5 or ULA Ultra low absorption

AR Anti-reflection

ZNSE Sinc-selinide

FS Fused silica

DIA Diameter

FL Focal length

ET Edge thickness

WD Working distance

CO2 and fiber laser optics

How to handle opticsFollow these easy steps, when cleaning or changing your optic, to help maximize the life and performance of your lens

• Avoid touching coated surfaces of thelens and hold the optic by its sides

• Wear powder-free finger cots or latexgloves when handling

• Do not use any tools or sharp objectswhen handling the optic or whenremoving it from its packaging

• Ensure the work surface is clean andfree of oils, grease and dirt

• Do not place the optic on hardsurfaces as they scratch easily

• Once the optic has been unpacked,carefully place it on the lens tissue inwhich it was originally wrapped

Optics disposal It is important to dispose of used laser optics at a licensed industrial waste facility which is in compliance with all local, state, and federal regulations. If you don’t have access to a licensed industrial waste facility, and purchased your laser optics through Centricut, you may return them to Centricut for proper disposal. This service is only available to Centricut customers.All optics returned to Centricut must:

• Include return authorization andinvoice numbers

• Be sealed in a plastic bag to minimizeany hazards

• Remove excess ZnSe powder prior tosealing

*Acceptance of goods will be refused if not packaged correctly or if the return authorization number isn’t included

4

AL1100 LASER CO² GLASSES CE APPROVEDAL1100017 LASER ECO CO² GLASSES CE APPROVED 1.5-4.0kWAL1100015 LASER PROTECTOR CO² GLASSES CE APPROVED 1.5-4.0kWAL1100018 LASER PROTECTOR CO² GLASSES CE APPROVED 1.5-4.0kWGLADIATOR LASER OVERGLASSES CO² LIGHT VERSION 80gOVERSPEC LASER OVERGLASSES CO² VERSION 1500-4000W

AL1001 123602 LENS CLEANING LIQUID - ml 200

AL1001/L 123602 LENS CLEANING LIQUID - ml 1000

AL1003-100 240568-100 LENS CLEANING POLISH - ml 100

AL1003-200 240568-200 LENS CLEANING POLISH - ml 200

AL1004 POLISH DETERGENT

AL1010 DROPPER FOR LENS CLEANING LIQUID

AL1120 LATEX GLOVES - 10 pieces

ALI115 INDIUM WIRE Ø 1.0mm FOR 1.5" LENS

ALI115/M MAZAK® INDIUM 0.8mm FOR 1.5" MAZAK® LENS

ALI120 INDIUM WIRE Ø 1.0mm FOR Ø 2.0mm LENS

ALI120/M MAZAK® INDIUM 0,8mm FOR 2,0" LENS

SC50 LENS CLEANING PAPER - 75x135 - 50sheets

SC100 KODAK LENS CLEANING PAPER - 70x120 - 50sheets

SC105 LENS CLEANING PAPER - 100x105 - 50sheets

SC20 COTTON SWAB -20 pieces

AL1115 LENS CLEANING PRE-CUT COTTON - 100 pieces

AL255 091860 SCALE LUPE

AL271 BASE FOR LENS MAINTENANCE FOR 1,5" & 2,0" LENS

AL282 INJECTOR

350424-005 Lens Cleaning Holder 1.5" with Polarisors350423-005 Lens Cleaning Holder 2.0" with Polarisors

910000 Lens Cleaning Kit020003-101 EZ Clean Wipes for Easy Lens Cleaning/ 24Pack

DESCRIPTIONPOS ORIGINAL CODETalas CODE

ACCESSORIES

Paardenkerkhofstraat 56 B-2800 Mechelen Tel. 015.61.60.07 Fax. 015.61.75.27 Email. [email protected]

5


Replacement parts suitable for:

Precitec®

1 2

3 4

Consumables

Centricut part number

Esse A part number

Reference number Description

Pkg qty

1PT348-1051 AL355 P0571-1051-00001, 6930281333 PT-Nozzle holder KT B2" Con 1PT348-1052 Recommended AL495 P0571-1051-00001, 6930281333 PT-Nozzle holder KT B2" Con 1PT348-1053 AL380 P0571-1051-00001, 6930281333 PT-Nozzle holder KT B2 Con 1

2PT348-1330 Recommended AL131 281330, P0571-260-00001, 6930281330 PT-Nozzle holder KT B2 1PT348-0260 AL421 281330, P0571-260-00001, 6930281330 PT-Nozzle holder KT B2 1PT348-1330OEM AL23 281330, P0571-260-00001, 6930281330 PT-Nozzle holder KT B2 1

3

PT345-0008X L30935 PT-Nozzle HD, 0.8 mm (10 pk)* 10PT345-1548X L30234 281548, P0591-571-00010 PT-Nozzle HD, 1.0 mm (10 pk)* 10PT345-1549X L30235 281549, P0591-572-00012 PT-Nozzle HD, 1.2 mm (10 pk)* 10PT345-1555X L30824 PT-Nozzle HD, 1.4 mm (10 pk)* 10PT345-1463X L30236 281463-P0591-573-00015 PT-Nozzle HD, 1.5 mm (10 pk)* 10PT345-0001X L30237 P0591-574-00018 PT-Nozzle HD, 1.8 mm (10 pk)* 10PT345-1550X L30238 281550, P0591-575-00020 PT-Nozzle HD, 2.0 mm (10 pk)* 10PT345-0003X L30239 PT-Nozzle HD, 2.3 mm (10 pk)* 10PT345-1551X L30240 281551, P0591-576-00025 PT-Nozzle HD, 2.5 mm (10 pk)* 10PT345-1552X L30936 PT-Nozzle HD, 2.75 mm (10 pk)* 10PT345-0002X L30241 PT-Nozzle HD, 3.0 mm (10 pk)* 10PT345-0005X L30826 PT-Nozzle HD, 3.2 mm (10 pk)* 10PT345-0006X L30827 PT-Nozzle HD, 3.5 mm (10 pk)* 10PT345-0004X L30828 PT-Nozzle HD, 4.0 mm (10 pk)* 10PT345-0007X L30829 PT-Nozzle HD, 4.5 mm (10 pk)* 10PT345-1547CPX L30935X PT-Nozzle HD, 0.8 mm CP (10 pk)* 10PT345-1548CPX L30234X 281548, P0591-571-00010 PT-Nozzle HD, 1.0 mm CP (10 pk)* 10PT345-1549CPX L30235X 281549, P0591-572-00012 PT-Nozzle HD, 1.2 mm CP (10 pk)* 10PT345-1555CPX L30824X PT-Nozzle HD, 1.4 mm CP (10 pk)* 10PT345-1463CPX L30236X 281463-P0591-573-00015 PT-Nozzle HD, 1.5 mm CP (10 pk)* 10PT345-0001CPX L30237X P0591-574-00018 PT-Nozzle HD, 1.8 mm CP (10 pk)* 10PT345-1550CPX L30238X 281550-P0591-575-00020 PT-Nozzle HD, 2.0 mm CP (10 pk)* 10PT345-0003CPX L30239X PT-Nozzle HD, 2.3 mm CP (10 pk)* 10PT345-1551CPX L30240X 281551, P0591-576-00025 PT-Nozzle HD, 2.5 mm CP (10 pk)* 10PT345-0002CPX L30241X PT-Nozzle HD, 3.0 mm CP (10 pk)* 10PT345-0004CPX L30828X PT-Nozzle HD, 4.0 mm CP (10 pk)* 10PT345-0007CPX L30829X PT-Nozzle HD, 4.5 mm CP (10 pk)* 10

4

PT345-1936X L301936 PT-Nozzle large head HD, 4.0 mm (10 pk)* 10PT345-1937X L301937 PT-Nozzle large head HD, 4.5 mm (10 pk)* 10PT345-0830X L30830 PT-Nozzle large head HD, 5.0 mm (10 pk)* 10PT345-1936CPX L301936X PT-Nozzle large head HD, 4.0 mm CP (10 pk)* 10PT345-1937CPX L301937X PT-Nozzle large head HD, 4.5 mm CP (10 pk)* 10

*Available in single packs. To order single packs, remove the ‘X’ at the end of the part number (e.g. AM123-4567X would be AM123-4567)

For Adige, Durma, Ermaksan, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems

7



Precitec®For Adige, Durma, Ermaksan, Finn Power, GHT and Salvagnini systems

1 2

3

Consumables


Esse A part number


Pkg qty



3

PT358-0691X L30691 PT-Nozzle double, 0.9 mm/inner 1.5 mm (10 pk)* 10PT358-0010X L30660 PT-Nozzle double, 1.0 mm/inner 1.5 mm (10 pk)* 10PT358-0112X L30661-12 PT-Nozzle double, 1.2 mm/inner 1.2 mm (10 pk)* 10PT358-0125X L30661 P0591-002-00012 PT-Nozzle double, 1.2 mm/inner 1.5 mm (10 pk)* 10PT358-0124X L30672 PT-Nozzle double, 1.4 mm/inner 1.5 mm (10 pk)* 10PT358-0015X L30662 P0591-002-00015 PT-Nozzle double, 1.5 mm/inner 1.5 mm (10 pk)* 10PT358-0018X L30663 P0591-002-00018 PT-Nozzle double, 1.8 mm/inner 1.5 mm (10 pk)* 10PT358-0020X L30664 P0591-002-00020 PT-Nozzle double, 2.0 mm/inner 1.5 mm 10PT358-0420X L30664-20 PT-Nozzle double, 2.0 mm Inner 2.0 mm (10 pk)* 10PT358-0620X L30666-20 PT-Nozzle double, 2.5 mm/inner 2.0 mm (10 pk)* 10PT358-0720X L30667-20 PT-Nozzle double, 3.0 mm/inner 2.0 mm (10 pk)* 10PT358-0023X L30665 PT-Nozzle double, 2.3 mm/inner 1.5 mm (10 pk)* 10PT358-0007X L30666 PT-Nozzle double, 2.5 mm/inner 1.5 mm (10 pk)* 10PT358-0030X L30667 PT-Nozzle double, 3.0 mm/inner 1.5 mm (10 pk)* 10PT358-0035X L30668 PT-Nozzle double, 3.5 mm/inner 1.5 mm (10 pk)* 10PT358-0010CPX L30660X PT-Nozzle double, 1.0 mm/inner 1.5 mm CP (10 pk)* 10PT358-0125CPX L30661X PT-Nozzle double, 1.2 mm/inner 1.5 mm CP (10 pk)* 10PT358-0124CPX L30672X PT-Nozzle double, 1.4 mm/inner 1.5 mm CP (10 pk)* 10PT358-0015CPX L30662X PT-Nozzle double, 1.5 mm/inner 1.5 mm CP (10 pk)* 10PT358-0018CPX L30663X PT-Nozzle double, 1.8 mm/inner 1.5 mm CP (10 pk)* 10PT358-0020CPX L30664X PT-Nozzle double, 2.0 mm/inner 1.5 mm 10PT358-0023CPX L30665X PT-Nozzle double, 2.3 mm/inner 1.5 mm CP (10 pk)* 10PT358-0025CPX L30666X PT-Nozzle double, 2.5 mm/inner 1.5 mm CP (10 pk)* 10PT358-0030CPX L30667X PT-Nozzle double, 3.0 mm/inner 1.5 mm CP (10 pk)* 10PT358-0035CPX L30668X PT-Nozzle double, 3.5 mm/inner 1.5 mm CP (10 pk)* 10PT358-0040X L30840 PT-Nozzle double, 4.0 mm/inner 1.5 mm (10 pk)* 10PT358-0040CPX L30840X PT-Nozzle double, 4.0 mm/inner 1.5 mm CP (10 pk)* 10PT358-0045X L30841 PT-Nozzle double, 4.5 mm/inner 1.5 mm (10 pk)* 10PT358-0045CPX L30841X PT-Nozzle double, 4.5 mm/inner 1.5 mm CP (10 pk)* 10PT358-0050X L30861 PT-Nozzle double, 5.0 mm/inner 1.5 mm (10 pk)* 10PT358-1925 L1925 PT-Nozzle double Penta, 1.0 mm 1PT358-1926 L1926 PT-Nozzle double Penta, 1.2 mm 1PT358-1927 L1927 PT-Nozzle double Penta, 1.5 mm 1PT358-1928 L1928 PT-Nozzle double Penta, 2.0 mm 1PT358-1929 L1929 PT-Nozzle double Penta, 2.5 mm 1PT358-1930 L1930 PT-Nozzle double Penta, 3.0 mm 1PT358-1931 L1931 PT-Nozzle double Penta, 3.5 mm 1PT358-1932 L1932 PT-Nozzle double Penta, 4.0 mm 1PT358-1933 L1933 PT-Nozzle double Penta, 4.5 mm 1


8



Precitec®For Adige, Durma, Ermaksan, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems

1 2

3

Consumables


Esse A part number


Pkg qty



3

PT350-1590X L30247 281590, P0591-569-00008 PT-Nozzle, 0.8 mm (10 pk)* 10PT350-1331X L30162 281331, P0591-561-00010 PT-Nozzle, 1.0 mm (10 pk)* 10PT350-1351X L30130 281351, P0591-562-00012 PT-Nozzle, 1.2 mm (10 pk)* 10PT350-1352X L30131 281352, P0591-563-00015 PT-Nozzle, 1.5 mm (10 pk)* 10PT350-1353X L30153 281353, P0591-564-00018 PT-Nozzle, 1.8 mm (10 pk)* 10PT350-1354X L30132 281354, P0591-565-00020 PT-Nozzle, 2.0 mm (10 pk)* 10PT350-0023X L30154 PT-Nozzle, 2.3 mm (10 pk)* 10PT350-1591X L30155 281591, P0591-566-00025 PT-Nozzle, 2.5 mm (10 pk)* 10PT350-0030X L30156 PT-Nozzle, 3.0 mm (10 pk)* 10PT350-1590CPX L30247X 281590, P0591-569-00008 PT-Nozzle, 0.8 mm CP (10 pk)* 10PT350-1331CPX L30162X 281331, P0591-561-00010 PT-Nozzle, 1.0 mm CP (10 pk)* 10PT350-1351CPX L30130X 281351, P0591-562-00012 PT-Nozzle, 1.2 mm CP (10 pk)* 10PT350-1352CPX L30131X 281352, P0591-563-00015 PT-Nozzle, 1.5 mm CP (10 pk)* 10PT350-0001CPX L30248X PT-Nozzle, 1.7 mm CP (10 pk)* 10PT350-1353CPX L30153X 281353, P0591-564-00018 PT-Nozzle, 1.8 mm CP (10 pk)* 10PT350-1354CPX L30132X 281354, P0591-565-00020 PT-Nozzle, 2.0 mm CP (10 pk)* 10PT350-0002CPX L30154X PT-Nozzle, 2.3 mm CP (10 pk)* 10PT350-1591CPX L30155X 281591, P0591-566-00025 PT-Nozzle, 2.5 mm CP (10 pk)* 10PT350-0003CPX L30156X PT-Nozzle, 3.0 mm CP (10 pk)* 10


9



Precitec®For Adige, Durma, Ermaksan, Finn Power, GHT and Salvagnini systems

1 2

3 4 5

Consumables


Esse A part number


Pkg qty



3

PT358-0001 L1348 6930250001 PT-Nozzle double 3D, 0.8 mm/inner 1.5 mm 1PT358-0002 L1349 6930250002 PT-Nozzle double 3D, 1.0 mm/inner 1.5 mm 1PT358-0003 L1350 6930250003 PT-Nozzle double 3D, 1.2 mm/inner 1.5 mm 1PT358-0004 L1351 6930250004 PT-Nozzle double 3D, 1.5 mm/inner 1.5 mm 1PT358-0005 L1470 PT-Nozzle double 3D, 1.8 mm/inner 1.5 mm 1PT358-0002CP L1349X PT-Nozzle double 3D, 1.0 mm/inner 1.5 mm CP 1PT358-0003CP L1350X PT-Nozzle double 3D, 1.2 mm/inner 1.5 mm CP 1PT358-0004CP L1351X PT-Nozzle double 3D, 1.5 mm/inner 1.5 mm CP 1PT358-0005CP L1470X PT-Nozzle double 3D, 1.8 mm/inner 1.5 mm CP 1

4

PT406-0799 L799 PT-Nozzle HD, 0.8 mm 1PT406-0001 L738 PT-Nozzle HD, 1.0 mm 1PT406-0002 L739 PT-Nozzle HD, 1.2 mm 1PT406-0003 L740 PT-Nozzle HD, 1.5 mm 1

5

PT406-0008 L792 PT-Nozzle, 0.8 mm 1PT406-0010 L793 PT-Nozzle, 1.0 mm 1PT406-0125 L794 PT-Nozzle, 1.2 mm 1PT406-0015 L742 P0591-1049-00015 PT-Nozzle, 1.5 mm 1PT406-0018 L743 P0591-1050-00018 PT-Nozzle, 1.8 mm 1PT406-0020 L744 PT-Nozzle, 2.0 mm 1

10



Precitec®For Adige, Finn Power and GHT systems

1 2

3 4 5 6

M8

M6

M6

M8

28

29

29

20

28

28

28

28

11.

7

M11

28

11.

7

M11 M11 M11

8.8

Consumables


Esse A part number


Pkg qty



3 PT406-0333 AL333 PT-Nozzle adapter, L=29 M8 14 PT406-0334 AL334 PT-Nozzle adapter, L=30 M6 15 PT406-0335 AL335 PT-Nozzle adapter, L=20 M6 16 PT406-0043 AL43 PT-Nozzle adapter 1

11



Precitec®

1 2

3 4 5 6

Consumables


Esse A part number


Pkg qty



3

PT420-0010 L680 PT-Nozzle double long, 1.0 mm 1PT420-0125 L681 PT-Nozzle double long, 1.2 mm 1PT420-0015 L682 PT-Nozzle double long, 1.5 mm 1PT420-0018 L683 PT-Nozzle double long, 1.8 mm 1PT420-0020 L684 PT-Nozzle double long, 2.0 mm 1PT420-0023 L685 PT-Nozzle double long, 2.3 mm 1PT420-0025 L686 PT-Nozzle double long, 2.5 mm 1PT420-0030 L687 PT-Nozzle double long, 3.0 mm 1PT420-0035 L688 PT-Nozzle double long, 3.5 mm 1

4

PT390-0010 L308 P0573-563-00010 PT-Nozzle long, 1.0 mm 1PT390-0012 L307 P0573-563-00012 PT-Nozzle long, 1.2 mm 1PT390-0015 L382 P0573-563-00015 PT-Nozzle long, 1.5 mm 1PT390-0018 L383 PT-Nozzle long, 1.8 mm 1PT390-0020 L437 P0573-564-00020 PT-Nozzle long, 2.0 mm 1PT390-0025 L439 P0573-566-00025 PT-Nozzle long, 2.5 mm 1PT390-0030 L440 PT-Nozzle long, 3.0 mm 1

5

PT390-0001 L1341 PT-Nozzle long, 1.0 mm 1PT390-0002 L1343 PT-Nozzle long, 1.5 mm 1PT390-0003 L1344 PT-Nozzle long, 1.8 mm 1PT390-0004 L1345 PT-Nozzle long, 2.0 mm 1

6

PT390-0040 L1374 P0578-0411-00010 PT-Nozzle radius long, 1.0 mm 1PT390-0005 L1375 P0578-0412-00012 PT-Nozzle radius long, 1.2 mm 1PT390-0006 L1376 P0578-0413-00015, 6930300039 PT-Nozzle radius long, 1.5 mm 1PT390-0009 L1373 P0578-0414-00018 PT-Nozzle radius long, 1.8 mm 1PT390-0007 L1377 P0578-0415-00020, 6930300040 PT-Nozzle radius long, 2.0 mm 1PT390-0008 L1378 P0578-0417-00025 PT-Nozzle radius long, 2.5 mm 1PT390-0005CP L1375X PT-Nozzle radius long, 1.2 mm CP 1PT390-0006CP L1376X PT-Nozzle radius long, 1.5 mm CP 1PT390-0007CP L1377X PT-Nozzle radius long, 2.0 mm CP 1

For Adige, Finn Power and GHT systems

12



Precitec®For Adige, Durma, Ermaksan, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems

1 2

3 4 5 6 7

Consumables


Esse A part number


Pkg qty



3

PT377-0001 L1179 PT-Nozzle double, 1.0 mm/inner 1.5 mm 1PT377-0002 L1180 PT-Nozzle double, 1.5 mm/inner 1.5 mm 1PT377-0003 L1181 PT-Nozzle double, 2.0 mm/inner 1.5 mm 1PT377-0004 L1182 PT-Nozzle double, 2.5 mm/inner 1.5 mm 1PT377-0005 L1183 PT-Nozzle double, 3.0 mm/inner 1.5 mm 1PT377-0001CP L1179X PT-Nozzle double, 1.0 mm/inner 1.5 mm CP 1PT377-1160CP L1160X PT-Nozzle double, 1.2 mm/inner 1.5 mm CP 1PT377-1161CP L1161X PT-Nozzle double, 1.4 mm/inner 1.5 mm CP 1PT377-0002CP L1180X PT-Nozzle double, 1.5 mm/inner 1.5 mm CP 1PT377-1162CP L1162X PT-Nozzle double, 1.8 mm/inner 1.5 mm CP 1PT377-0003CP L1181X PT-Nozzle double, 2.0 mm/inner 1.5 mm 1PT377-0004CP L1182X PT-Nozzle double, 2.5 mm/inner 1.5 mm CP 1PT377-0005CP L1183X PT-Nozzle double, 3.0 mm/inner 1.5 mm CP 1PT377-1184CP L1184X PT-Nozzle double, 3.5 mm/inner 1.5 mm CP 1

4

PT348-0001 L1218 PT-Nozzle HD, 1.5 mm 1PT348-0002 L1219 PT-Nozzle HD, 2.0 mm 1PT348-0003 L1220 PT-Nozzle HD, 2.5 mm 1PT348-0002CP L1219X PT-Nozzle HD, 2.0 mm CP 1PT348-0003CP L1220X PT-Nozzle HD, 2.5 mm CP 1

5

PT348-0010 L1060 PT-Nozzle HD, 1.0 mm 1PT348-0012 L1061 PT-Nozzle HD, 1.2 mm 1PT348-0015 L1062 PT-Nozzle HD, 1.5 mm 1PT348-0020 L1063 PT-Nozzle HD, 2.0 mm 1PT348-0025 L1064 PT-Nozzle HD, 2.5 mm 1PT348-0030 L1065 PT-Nozzle HD, 3.0 mm 1PT348-1086 L1086 PT-Nozzle HD, 3.5 mm 1PT348-1087 L1087 PT-Nozzle HD, 4.0 mm 1PT348-1088 L1088 PT-Nozzle HD, 4.5 mm 1PT348-1089 L1089 PT-Nozzle HD, 5.0 mm 1

13


Consumables


Esse A part number


Pkg qty

6

PT348-1340 L410 281340, P0571-281-00010 PT-Nozzle, 1.0 mm 1PT348-1341 L411 281341, P0571-282-00012 PT-Nozzle, 1.2 mm 1PT348-1342 L412 281342, P0571-283-00015 PT-Nozzle, 1.5 mm 1PT348-0018 L413 281342, P0571-284-00018 PT-Nozzle, 1.8 mm 1PT348-1343 L414 281343, P0571-285-00020 PT-Nozzle, 2.0 mm 1PT348-1344 L415 281344, P0571-286-00025 PT-Nozzle, 2.5 mm 1

7

PT377-0010 L465 281599, P0571-291-00010 PT-Nozzle, 1.0 mm 1PT377-0012 L466 P0571-292-00012 PT-Nozzle, 1.2 mm 1PT377-0015 L467 281570, P0571-293-00015 PT-Nozzle, 1.5 mm 1PT377-0018 L468 PT-Nozzle, 1.8 mm 1PT377-0020 L469 281571, P0571-295-00020 PT-Nozzle, 2.0 mm 1PT377-0025 L470 281572, P0571-297-00025 PT-Nozzle, 2.5 mm 1PT377-0030 L463 PT-Nozzle, 3.0 mm 1


Precitec®

14



Precitec®

1 2 3

4 5

Consumables


Esse A part number


Pkg qty

1

PT377-0001 L1179 PT-Nozzle double, 1.0 mm/inner 1.5 mm 1PT377-0002 L1180 PT-Nozzle double, 1.5 mm/inner 1.5 mm 1PT377-0003 L1181 PT-Nozzle double, 2.0 mm/inner 1.5 mm 1PT377-0004 L1182 PT-Nozzle double, 2.5 mm/inner 1.5 mm 1PT377-0005 L1183 PT-Nozzle double, 3.0 mm/inner 1.5 mm 1PT377-0001CP L1179X PT-Nozzle double, 1.0 mm/inner 1.5 mm CP 1PT377-1160CP L1160X PT-Nozzle double, 1.2 mm/inner 1.5 mm CP 1PT377-1161CP L1161X PT-Nozzle double, 1.4 mm/inner 1.5 mm CP 1PT377-0002CP L1180X PT-Nozzle double, 1.5 mm/inner 1.5 mm CP 1PT377-1162CP L1162X PT-Nozzle double, 1.8 mm/inner 1.5 mm CP 1PT377-0003CP L1181X PT-Nozzle double, 2.0 mm/inner 1.5 mm 1PT377-0004CP L1182X PT-Nozzle double, 2.5 mm/inner 1.5 mm CP 1PT377-0005CP L1183X PT-Nozzle double, 3.0 mm/inner 1.5 mm CP 1PT377-1184CP L1184X PT-Nozzle double, 3.5 mm/inner 1.5 mm CP 1

2

PT348-0001 L1218 PT-Nozzle HD, 1.5 mm 1PT348-0002 L1219 PT-Nozzle HD, 2.0 mm 1PT348-0003 L1220 PT-Nozzle HD, 2.5 mm 1PT348-0002CP L1219X PT-Nozzle HD, 2.0 mm CP 1PT348-0003CP L1220X PT-Nozzle HD, 2.5 mm CP 1

3

PT348-0010 L1060 PT-Nozzle HD, 1.0 mm 1PT348-0012 L1061 PT-Nozzle HD, 1.2 mm 1PT348-0015 L1062 PT-Nozzle HD, 1.5 mm 1PT348-0020 L1063 PT-Nozzle HD, 2.0 mm 1PT348-0025 L1064 PT-Nozzle HD, 2.5 mm 1PT348-0030 L1065 PT-Nozzle HD, 3.0 mm 1PT348-1086 L1086 PT-Nozzle HD, 3.5 mm 1PT348-1087 L1087 PT-Nozzle HD, 4.0 mm 2PT348-1088 L1088 PT-Nozzle HD, 4.5 mm 3PT348-1089 L1089 PT-Nozzle HD, 5.0 mm 4

4

PT348-1340 L410 281340, P0571-281-00010 PT-Nozzle, 1.0 mm 1PT348-1341 L411 281341, P0571-282-00012 PT-Nozzle, 1.2 mm 1PT348-1342 L412 281342, P0571-283-00015 PT-Nozzle, 1.5 mm 1PT348-0018 L413 281342, P0571-284-00018 PT-Nozzle, 1.8 mm 1PT348-1343 L414 281343, P0571-285-00020 PT-Nozzle, 2.0 mm 1PT348-1344 L415 281344, P0571-286-00025 PT-Nozzle, 2.5 mm 1

5

PT377-0010 L465 281599, P0571-291-00010 PT-Nozzle, 1.0 mm 1PT377-0012 L466 P0571-292-00012 PT-Nozzle, 1.2 mm 1PT377-0015 L467 281570, P0571-293-00015 PT-Nozzle, 1.5 mm 1PT377-0018 L468 PT-Nozzle, 1.8 mm 1PT377-0020 L469 281571, P0571-295-00020 PT-Nozzle, 2.0 mm 1PT377-0025 L470 281572, P0571-297-00025 PT-Nozzle, 2.5 mm 1PT377-0030 L463 PT-Nozzle, 3.0 mm 1

For Adige, Durma, Ermaksan, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems

15


1 2 3

4 5 6 7

8

Consumables


Esse A part number


Pkg qty

1 PT348-1330C AL331 281330, P0571-260-00001, 6930281330 PT-Nozzle holder, ceramic 12 PT348-1001 AL228 PT-Nozzle holder 13 PT348-1518 AL141 281518, P0571-265-00001 PT-Nozzle holder IT B2" Z, aluminum 1

4

PT344-1813X L30405 281813, P0589-424-00008 PT-Nozzle, 0.8 mm (10 pk)* 10PT344-1789X L30406 281789, P0589-426-00010 PT-Nozzle, 1.0 mm (10 pk)* 10PT344-1561X L30404 281561, 778550 PT-Nozzle, 1.2 mm (10 pk)* 10PT344-1499X L30407 281814, 149957 PT-Nozzle, 1.5 mm (10 pk)* 10PT344-0020X L30408 P0589-428-00020 PT-Nozzle, 2.0 mm (10 pk)* 10PT344-1791 281791, P0492-446-00025, W226 PT-Nozzle FP, 2.5 mm 1YK52 Sensor system

5

PT391-0010X L30800 281498, P0587-722-00010 PT-Nozzle, 1.0 mm (10 pk)* 10PT391-0012X L30801 P0587-723-00012 PT-Nozzle, 1.2 mm (10 pk)* 10PT391-0015X L30802 281497, P0587-721-00015 PT-Nozzle, 1.5 mm (10 pk)* 10PT391-0018X L30803 281516, P0587-737-00018 PT-Nozzle, 1.8 mm (10 pk)* 10PT391-0020X L30804 281567, P0587-771-00020 PT-Nozzle, 2.0 mm (10 pk)* 10PT391-0025X L30805 P0587-772-00025 PT-Nozzle, 2.5 mm (10 pk)* 10

6PT401-1008 L1012 P0587-842-00008 PT-Nozzle, 0.8 mm 1PT401-0010 L1013 P0587-841-00010 PT-Nozzle, 1.0 mm 1

7 PT344-1079 AL138 281079, P0492-430-00003, W149 PT-Nozzle Holder KT M1.5" S F2.5" OEM 1

8

PT344-0013X L30400 280013, P0492-441-00008, W222 PT-Nozzle FP, 0.8 mm (10 pk)* 10PT344-0014X L30401 PT-Nozzle FP, 1.0 mm (10 pk)* 10PT344-0015X L30402 280015, P0492-443-00012 PT-Nozzle FP, 1.2 mm (10 pk)* 10PT344-0016X L30403X PT-Nozzle FP, 1.5 mm (10 pk)* 10PT344-0018X L30543 P0492-447-00018 PT-Nozzle FP, 1.8 mm (10 pk)* 10PT344-0937X L30544 PT-Nozzle FP, 3.0 mm (10 pk)* 10PT344-1791X L30545 PT-Nozzle FP, 2.5 mm (10 pk)* 10PT344-0027X L30547 PT-Nozzle FP, 3.0 mm (10 pk)* 10PT344-0010CPX L30401X 280014, P0492-442-00010, W223 PT-Nozzle FP, 1.0 mm CP (10 pk)* 10PT344-0015CPX L30403X 280016, P0492-444-00015, W224 PT-Nozzle FP, 1.5 mm CP (10 pk)* 10PT344-0022CPX L30544X 280937, P0492-445-00020, W225 PT-Nozzle FP, 2.0 mm CP (10 pk)* 10



Precitec®

16



Precitec®For Adige, Finn Power and Salvagnini systems

Consumables


Esse A part number


Pkg qty

1 TR302-2405 AL53 280408, 092405 TR-Nozzle holder KT M1.5" KN OEM 1

2

PT344-0551X L30292 280551, P0494-853-00010 PT-Nozzle, 1.0 mm (10 pk)* 10PT344-0552X L30293 280552, P0494-854-00012 PT-Nozzle, 1.2 mm (10 pk)* 10PT344-0553X L30294 280553, P0494-855-00015 PT-Nozzle, 1.5 mm (10 pk)* 10PT344-0554X L30295 280553, P0494-856-00017 PT-Nozzle, 1.7 mm (10 pk)* 10PT344-0555X L30296 280555, P0494-855-00020 PT-Nozzle, 2.0 mm (10 pk)* 10PT344-9023X L30372 PT-Nozzle, 2.3 mm (10 pk)* 10PT344-9025X L30371 PT-Nozzle, 2.5 mm (10 pk)* 10PT344-0030X L30304 PT-Nozzle, 3.0 mm (10 pk)* 10PT344-0400X L30303 PT-Nozzle, 4.0 mm (10 pk)* 10DE M 1.5"

3

PT379-0010X L301055 280943, P0494-787-00010 PT-Nozzle KN TAK, 1.0 mm (10 pk)* 10PT379-0012X L301056 280942, P0494-788-00012 PT-Nozzle KN TAK, 1.2 mm (10 pk)* 10PT379-0015X L301057 280941, P0494-789-00015 PT-Nozzle KN TAK, 1.5 mm (10 pk)* 10PT379-0018X L301058 PT-Nozzle KN TAK, 1.8 mm (10 pk)* 10PT379-0020X L301059 PT-Nozzle KN TAK, 2.0 mm (10 pk)* 10DE Y 30/22

4

PT344-1980X L301980 P0787-482-00012 PT-Nozzle DE Y30/22 F100, 1.2 mm (10 pk)* 10PT344-1981X L301981 P0787-483-00015 PT-Nozzle DE Y30/22 F10, 1.5 mm (10 pk)* 10PT344-1983X NEW L301983 P0787-1001-00020 PT-Nozzle DE, 2.0 mm (10 pack)* 10PT344-1984X NEW L301984 PT-Nozzle DE, 2.5 mm (10 pack)* 10


1

2 3 4

17


For Adige and Mazak systems

1

2 3

4

Consumables


Esse A part number


Pkg qty

1 PT347-0110 P0491-130-00001 PT-Nozzle holder KT M1.5" K S OEM, ceramic 1

2

PT347-1034X L30481 281034, P0352-324-00012 PT-Nozzle ZK, 1.2 mm (10 pk)* 10PT347-1013X L30482 281013, P0352-325-00015 PT-Nozzle ZK, 1.5 mm (10 pk)* 10PT347-0899X L30483 280899, P0352-326-00018 PT-Nozzle ZK, 1.8 mm (10 pk)* 10PT347-0044-3 L484 350044.3, P0352-327-00020 PT-Nozzle ZK, 2.0 mm 1PT347-0044X L30484 350044.3, P0352-327-00020 PT-Nozzle ZK, 2.0 mm (10 pk)* 10PT347-1025X L30485 350044.3, P0352-328-00025 PT-Nozzle ZK, 2.5 mm (10 pk)* 10

3

PT347-1006X L30486 281006, P0352-333-00010 PT-Nozzle KK, 1.0 mm (10 pk)* 10PT347-1030X L30487 281030, P0352-334-00012 PT-Nozzle KK, 1.2 mm (10 pk)* 10PT347-1031X L30488 281031, P0352-335-00015 PT-Nozzle KK, 1.5 mm (10 pk)* 10PT347-0898X L30489 280898, P0352-336-00018 PT-Nozzle KK, 1.8 mm (10 pk)* 10PT347-1020X L30490 P0352-336-00020 PT-Nozzle KK, 2.0 mm (10 pk)* 10PT347-1761 L1761 P0491-1001-00015 PT-Nozzle hexagonal DE M1.5 KS, 1.2 mm 1PT347-1762 L1762 P0491-1001-00015 PT-Nozzle hexagonal DE M1.5 KS, 1.5 mm 1PT347-1764 L1764 P0491-1002-00020 PT-Nozzle hexagonal DE M1.5 KS, 2.0 mm 1PT347-1760X L301760 P0491-1001-00015 PT-Nozzle hexagonal DE M1.5 KS, 1.0 mm (10 pk)* 1PT347-1761X L301761 P0491-1002-00020 PT-Nozzle hexagonal DE M1.5 KS, 1.2 mm (10 pk)* 1PT347-1762X L301762 L301762 PT-Nozzle hexagonal DE M1.5 KS, 1.5 mm (10 pk)* 1PT347-1764X L301764 L301764 PT-Nozzle hexagonal DE M1.5 KS, 2.0 mm (10 pk)* 1



Precitec®

18



Precitec®

Consumables


Esse A part number


Pkg qty

1 AM326-6453 AL94 71366453 AM-O-ring for outer nozzle 1

2PT311-0001 AL201 P0492-702-00002 PT-Insulating ring 1PT347-4297 AL198 P0492-702-00001, 29100021 PT-Insulating ring outer body 1

3 PT311-0298 AL298 P0497-68871 PT-Nozzle holder KTM 1.5" DXN, ceramic 1

4PT311-1146 Recommended AL130/S 281146, P0380-211-00001, 29100033 PT-Nozzle holder ITM 1.5" DZ 1PT311-1146OEM AL130 281146, P0380-211-00001, 29100033 PT-Nozzle holder ITM 1.5" DZ OEM 1

5PT376-0010 L365 280029, P0492-628-00010 PT-Nozzle, 1.0 mm 1PT376-0012 L366 280030, P0492-629-00012 PT-Nozzle, 1.2 mm 1

6 PT376-0015 L367 280028, P0492-627-00015 PT-Nozzle, 1.5 mm 1

7PT376-0017 L368 281384, P0492-630-00017 PT-Nozzle, 1.7 mm 1PT376-0020 L369 280027, P0492-626-00020 PT-Nozzle, 2.0 mm 1

8 PT376-0025 L370 280026, P0492-625-00025 PT-Nozzle, 2.5 mm 1

9

PT311-0012 L164 281254, P0380-252-00012 PT-Nozzle, 1.2 mm 1PT311-0015 L165 281255, P0380-253-00015 PT-Nozzle, 1.5 mm 1PT311-0020 L166 281270, P0380-254-00020 PT-Nozzle, 2.0 mm 1PT311-0025 L167 281271, P0380-255-00025 PT-Nozzle, 2.5 mm 1PT311-0027 L462 281271-2.7 PT-Nozzle, 2.7 mm 1PT311-0030 L201 281271-3.0 PT-Nozzle, 3.0 mm 1


1

2

3 4

5 6 7 8 9

For Adige and Finn-Power systems

19



Precitec®For Adige and Mazak systems

1 2

3

4 5

6

7

8

9

Consumables


Esse A part number


Pkg qty

1

PT347-0005 L554 46713300290-10 PT-Nozzle 3D, 1.0 mm 1PT347-0290-1.2 L555 46713300290-12 PT-Nozzle 3D, 1.2 mm 1PT347-0090X L30555 46713300290-12 PT-Nozzle 3D, 1.2 mm (10 pk)* 10PT347-0290X L30556 46713300290-15, P0352-381-00015 PT-Nozzle 3D, 1.5 mm (10 pk)* 10PT347-0118X L30557 P0352-377-00018 PT-Nozzle 3D, 1.8 mm (10 pk)* 10PT347-0280X L30558 46713300310, P0352-382-00020 PT-Nozzle 3D, 2.0 mm (10 pk)* 10PT347-0001X L30560 46713300280-25 PT-Nozzle 3D, 2.5 mm (10 pk)* 10PT347-0002X L30563 46713300280-30, 46713300430 PT-Nozzle 3D, 3.0 mm (10 pk)* 10PT347-0035X L30564 46713300280-35 PT-Nozzle 3D, 3.5 mm (10 pk)* 10

2

PT347-0004X L30576 PT-Nozzle 2D, 1.0 mm (10 pk)* 10PT347-0310-1.2 L577 46713300310 PT-Nozzle 2D, 1.2 mm 1PT347-0012X L30577 46713300310 PT-Nozzle 2D, 1.2 mm (10 pk)* 10PT347-0310X L30578 P0352-386-00015 PT-Nozzle 2D, 1.5 mm (10 pk)* 10PT347-0300X L30580 46713300300, P0352-387-00020 PT-Nozzle 2D, 2.0 mm (10 pk)* 10PT347-0003X L30581 46713300300-25 PT-Nozzle 2D, 2.5 mm (10 pk)* 10PT347-0006X L30582 46713300300-30 PT-Nozzle 2D, 3.0 mm (10 pk)* 10

3 PT347-0320 AL160 46713300321, P0352-311-00001 PT-Union nut, Vespel 14 PT347-4297 AL198 P0492-702-00001, 29100021 PT-Insulating ring outer body 15 PT347-0008 AL218 46713330200 PT-Isolating ring outer body (Precitec) 16 AM326-6453 AL94 71366453 AM-O-ring for outer nozzle 17 PT347-0009 AL256 46713300390 PT-Connector protector 18 PT347-0101 AL204 P0360-100-00500, 46713300100 PT-Sensor head connecting cable OEM 19 PT347-1386 AL257 281386, P0360-155-00500 PT-Electrode cable 1


20



Precitec®For Koike systems

1 2

3

4

5 6

7

8

9

Consumables


Esse A part number


Pkg qty



3 PT348-4175 L1547 20054175 PT-Nozzle, 1.9 mm 14 PT348-4176 AL415 20054176 PT-Nozzle outer, 8.0 mm 15 PT348-5175 L1595 PT-Nozzle, 1.7 mm 16 PT348-0414 AL414 PT-Nozzle outer, 7.0 mm 1

7PT348-1545 L1545 PT-Nozzle, 1.9 mm 1PT348-1594 NEW L1594 PT-Nozzle, 1.2 mm 1

8 PT348-1598 L1598 PT-Nozzle, 3.0 mm 19 PT348-0413 AL413 CZ20B-2 PT-Spacer 1


21



Precitec®

Consumables


Esse A part number


Pkg qty

PRECITEC® original spare parts (not shown)PT347-0110 P0491-130-00001 PT-Nozzle holder KT M1.5" K S OEM, ceramic 1PT347-0007 AL211 P0354-110-00001 PT-Sensor cone HNZ (Mazak) 1PT347-0010 P0591-105-00001 PT-Connector head OEM 1PT347-0012 P0497-130-00001 PT-Nut, M1.5" DXN OEM 1PT347-0013 P0787-467-00001 PT-Protection cap 1PT347-0200 P0497-002-00200 PT-Cable OEM, 200 mm 1PT347-0014 KE 300 gw Z mm P0360-150-00300 PT-Sensor cable OEM 1PT347-0016 P0591-770-00001 PT-Electrode tacitile OEM 1PT347-0017 ZM HP1.5" DR P0591-329-00001 PT-Seal OEM, 1.5" 1PT347-0018 ZM HP1.5" DF P0BMO0001124KF PT-Seal OEM, 1.5" 1PT347-0021 P0594-510-00001 PT-Sensor insert SE HP 2.0" OEM 1PT347-0022 281617 P0591-580-00001 PT-Socket ZM HP 1.5" IB OEM 1PT347-0023 281395 P0591-920-00001 PT- Seal set ZM HP1.5" DS OEM 1PT347-0024 P0497-110-00001 PT-Sensor insert SE M1.5" DXN 1PT347-1439 P0591-360-00001 PT-Lens ring set OEM 1PT347-1383 281395 P0591-490-00001 PT-Nut tray HP OEM (4 pcs) 1PT344-0001 P0788-580-00001 Lens mount – OL YR30 F100 w/lens 1PT347-0130 P0492-001-00130 PT-Electrode cable OEM, KE 130 GW 1PT347-0220 P0464-810-00220 PT-Electrode cable OEM, KE 220 GGMM 1PT347-350 AL350 46713330960 PT-Isolating ring, inner cone 1PT347-349 AL349 46713330930 PT-Sensor cone inner 1

22



Precitec®

1 2 3

5

6

4

For Adige, Durma, Ermakson, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems

Consumables


Esse A part number


Pkg qty

New sensor cones1 PT347-8001 280010 PT-Sensor cone 2.5Z/J 12 PT347-1145 NEW P0380-140-0002, PO380-130-00001, 281145 PT-Sensor cone, DZ 1

3

PT347-0011 NEW P0354-110-00001 PT-Sensor Cone HNZ (Mitsubishi) 1PT347-3323 NEW (not shown) HNP PT-Sensor Cone HNP 1PT347-0522 (not shown) P0599-520-00002 PT-Sensor Cone LRC 1PT347-0019 (not shown) PT-Sensor Insert SE 1.5" DZ 1Sensor cables

4PT347-0101A P0360-100-00500 PT-Sensor cable, 500 mm (20") armored 1PT347-0250 (not shown) P0492-001-00250 PT-Sensor cable, 250 mm (10") armored 1

5 PT347-0101 AL204 P0360-100-00500, 46713300100 PT-Sensor head connecting cable OEM 16 PT347-1386 AL257 281386, P0360-155-00500 PT-Sensor cable, armored 1

PT347-1250 (not shown) D5001-040-00250 PT-Sensor cable, 250 mm (10") armored 1PT347-KS13 (not shown) PRECITEC AD#130 PT-Sensor cable, 390 mm (15.5") armored 1PT347-0600OEM (not shown) P0360-210-00600 PT-Sensor cable, 600 ZWW OEM 1PT347-0450 (not shown) AL202 P0497-002-00450 PT-Sensor cable, 450 mm (17.7") 1PT347-0015A (not shown) 00B-15 PT-Sensor cable, 380 mm (15") 1PT347-0181 (not shown) AL358 46743300181 PT-Sensor cable, 305mm (12") armored 1PT347-0522 (not shown) PT-Sensor cone, LRC 1PT347-0014 (not shown) P36015000300 PT-Sensor cable, KE 300 gw Z MM OEM 1PT344-3051 (not shown) PT-Electrode guard, long 1PT347-0040 (not shown) 00BB-A-17i,BEC004-000.4 PT-Sensor cable, 431 mm (17") armored 1PT347-0300A (not shown) P0492-014-00300 PT-Sensor cable KE, 300 mm (12") armored 1PT348-0390 (not shown) AL257/S PT-Sensor cable, 390 mm (15.5") 1

23



Precitec®

Consumables


Esse A part number


Pkg qty

PT311-0787 (not shown) PT-Insulating ring 1PT347-0920 (not shown) AL221 46713330920 PT-Isolating ring outer body (Mazak) 1PT347-0520 (not shown) PT-Insulating plate 1PT347-0940 (not shown) AL353 46713330940 PT-Retaining ring 1PT347-1240 (not shown) AL351 46713331240 PT-Torch outer body 1PT347-0930 (not shown) PT-Spatter protection plate 2PT347-9006 (not shown) AL356 HNP-006 PT-Connector cup, HNP 1

OpticsCentricut part number

Reference number Type Diameter

Focal length

Edge thickness

LensesPT317-0002 406294 MEN 1.5" 5.0" .290"PT317-0001 452726 MEN 1.5" 7.5" .125"PT317-6326 206326 MEN 2.0" 5.0" .378"PT317-8936 468936/F PLX 1.5" 2.5" .085"PT317-8275 628275 PLX 2.0" 10.0" .310"PT317-0537 960537 PLX 2.0" 10.0" .380"PT317-9527 779527 PLX 2.0" 10.0" .500"PT317-8950 148950 PLX 1.5" 2.5" .085"


Reference number Material Diameter

Edge thickness

WindowsPT317-0589 FS (replacement o-ring = PT317-0501) 22.35 mm 4.0 mmPT317-1789 FS 50.00 mm 3.18 mmPT317-9360 P58936000001 FS (with o-ring) 22.35 mm 4.0 mmPT317-1424 WK OGC FS 21.50 mm 2.0 mmPT317-1425 SCR-01 FS 38.00 mm 5.2 mmPT317-1551 P0595-61551, P0595-58601-61551 FS 37.00 mm 7.0 mmPT317-5919 77005919 FS 48.00 mm 7.0 mmPT317-0010 NEW P0253-1034-00001 FS 30.00 mm 1.50 mmPT347-0000 P0251-1070-00001 FS 50.00mm 2.0 mm

Optics careCentricut part number


Pkg qty

TR300-6452 Lens cleaning Tiffen paper (50 pcs) 1TR300-1115 Lens cleaning pre-cut cotton (100 pcs) 1TR300-1010 AL1010 Dropper, lens cleaning fluid 1TR300-1112 Optical cleaning fluid 1TR300-0699 70675699 REVA Lens cleaning swabs (25 pcs) 1TR300-7991 27991 Polyester wipes 4" x 4" (100 pcs) 1TR301-0282 Injector 1TR300-LSA Lens stress analyzer 1TR300-255 AL255 Magnifying loop 1TR300-271 AL271 Base, mirror maintenance 1TR300-7388 787388 Mirror polish .1UM 250ML 1

24


Sensor cones

Centricut sensor cones provide substantial cost savings without sacrificing performance or quality

• Available for Amada, Mazak, Mitsubishi and Precitec• Delivers the same OEM performance at a lower cost• Unmatched performance and reliability• Engineered and manufactured to Hypertherm’s precise

quality standards• Backed by our one-year warranty and 100% satisfaction

guarantee

Centricut part number OEM


AM343-0091 Amada 71360091 AM-Sensor cone, HS95 miniAM343-1621 Amada 71341621 AM-Sensor cone, HS95AM343-9107 Amada ECO cone AM-Sensor cone, ECOAM343-1690 Amada 71341690 AM-Sensor cone, HS98AM343-L3015C Amada 71374509 AM-Sensor cone, LC3015PT347-3323 Mazak HNP PT-Sensor cone, HNPMZ335-HNPS Mazak HNPS MZ-Sensor cone, HNP short versionPT347-0007 Mazak 56743300500 PT-Sensor cone, HNZ (Mazak)PT347-0011 Mitsubishi P0354-110-00002 PT-Sensor cone, HNZ (Mitsubishi)MB334-W429A Mitsubishi P0461-270-00001 MB-Sensor cone, W429APT347-0238 Precitec BQ930D238G01 PT-Sensor cone, HNZ SMAPT347-8001 Precitec P0361-203-00001 PT-Sensor cone, 2.5/JPT347-0522 Precitec P0599-520-00002 PT-Sensor cone, LRCPT347-1145 Precitec P0380-140-0002, PO380-130-00001, 281145 PT-Sensor cone, DZ*Sensor cone repair service is available for most sensor cones in North America and select international regions. For more information contact [email protected].

25


Armored sensor cables

Centricut armored sensor cables outlast standard OEM cables

• Available for all major brands

• Robust design with extremetemperature rating (900–1200°)

• Longer life reduces downtimeand production loss

• Spatter resistant stainless steelarmoring

• Reinforced collars and high-qualityconnector

High quality stainless steel connector

Reinforced aluminum collar

Spatter resistant stainless steel armoring

Armored sensor cablesCentricut part number OEM


AM308-8965 Amada 71398965 AM-Sensor cable, 305 mm (12")AM308-8965A Amada 71398965 AM-Sensor cable, 305 mm (12") premium, armoredAM313-1901 Amada AM-Sensor cable, 305 mm (12") AM313-1901A Amada 71341630 AM-Sensor cable HS-5, 305 mm (12") premium, armoredAM313-8292 Amada 71398292 AM-Sensor cable dual shield, 7 metersAM313-9851A Amada 71369851 AM-Sensor cable, 230 mm (8") premiumCN306-0654A Cincinnati 909654, 922686 CN-Sensor cable, 114 mm (4.5") armoredCN306-0951A Cincinnati 842951 CN-Sensor cable, 140 mm (5.5") armoredCN306-2951 Cincinnati 842951, PLTTW0015 CN-Sensor cable, 140 mm (5.5")CN306-9654 Cincinnati 909654, 922686, PLTTW0002 CN-Sensor cable, 114 mm (4.5") armoredMZ335-0111A Mazak 4674330111 MZ-Sensor cable, 280 mm (11") armoredMZ335-0181A Mazak 46743300181 MZ-Sensor cable, 317.5 mm (12.5") armoredMZ335-1330A Mazak 46683301330 MZ-Sensor cable, 305 mm (12") armoredMZ335-1980A Mazak 46683301980 MZ-Sensor cable, 280 mm (11") armoredMZ335-5320 Mazak 6143355320 MZ-Sensor cable, 70 mm (2.8") armoredMZ335-630A Mazak 00BSBA630MNC MZ-Sensor cable, 630 mm (25") armoredMZ335-8290 Mazak 46143308290 MZ-Sensor cable, 75 mm (3")NT426-1682 NTC 4R029911-001, J482D NT-Sensor cable, 216 mm (8.5")NT426-4991 NTC 3-0104991 NT-Sensor cable 0-0BNC/MCX, 482 mm (19")NT426-7492 NTC 3-0117492 NT-Sensor cable 90BNC/90BNC, 482 mm (19")NT426-8677 NTC 4R028677-001 NT-Sensor cable, 508 mm (20") armoredPR361-3150 Prima 820.63.150 PR-Sensor cable, 150 mm (6")PT347-0014 Precitec P36015000300, KE 300 gw Z MM PT-Sensor cable OEMPT347-0015A Precitec 00B-15 PT-Sensor cable, 380 mm (15")PT347-0040 Precitec 00BB-A-17i, BEC004-000.4 PT-Sensor cable, 431 mm (17") armoredPT347-0101A Precitec P0360-100-00500 PT-Sensor cable, 500 mm (20") armoredPT347-0181 Precitec 46743300181 PT-Sensor cablePT347-0250 Precitec 342475 PT-Sensor cable, 250 mm (10") armoredPT347-0300A Precitec P0492-014-00300 PT-Sensor cable KE, 300 mm (12") armoredPT347-0450 Precitec P0497-002-00450 PT-Sensor cable, 450 mm (17.7")PT347-KS13 Precitec/Gunkyo 00BMTKA-A-HS500mm PT-Sensor cable, 390 mm (15.5") armoredPT347-0600OEM Precitec P0360-210-00600 PT-Sensor cable, 600 ZWW OEMPT347-1250 Precitec D5001-040-00250 PT-Sensor cable, 250 mm (10") armoredPT348-0390 Precitec PT-Sensor cable, 390 mm (15.5")TR301-0930 Trumpf 280930 TR-Sensor cable, 152 mm (6") armoredTR301-1086 Trumpf 351086, S0492-001-00000 TR-Sensor cableTR301-7833 Trumpf 227833 TR-Sensor cable, 432 mm (17")TR301-9983 Trumpf 359983, 342474 TR-Sensor cable, 190 mm (7.5") armored

26

• Best Focus Stability• Increased Durability• Recommended for High Power Lasers over 5KW• Best Surface Quality

Established in 1976, Ophir Optronics is a global leader in precision IR optics componentsand laser measurement equipment.Our CO2 Optics Group produces a full range of OEM and replacement optics including beam-delivery and cavityoptics as well as windows.Ophir provides the highest quality CO2 optics at the best price.

Our commitment to the customer is second to none, with a global distribution and support network. This unwaveringcommitment to forward thinking helps keep us "A Cut Above the Rest".

SIISO 9001:

2000

CE

RTIFIED QMS

SIISO 9001:

2000

MagicMagic

A Cut Above The RestOphir’s MagicMagic lenses are available worldwide.For more information please contact:www.ophiropt.com • [email protected]

Transparent Black MagicTM LensUltra Low Absorption Guaranteed

Ophir & Centricut by Talas = 100% Kwaliteitsgarantie & 100% OEM compatibiliteitsgarantie.

Talas is exclusief verdeler van o.a. lenzen & spiegels van Ophir voor BeLux en nozzles & ceramieken van Centricut/Hypertherm waardoor wij zeer competitieve tarieven hebben. Deze fabrikanten zijn tevens ook leverancier van de grootste fabrikanten(OEM) van lasersnijmachines. Ophir , een CO² Optica groep en tweede grootste leverancier in de wereld is producent van het volledige gamma optieken voor de OEM en de vervangingsmarkt. Ophir fabriceert lenzen met verschillende coatings voor een lagere absorptie en voor een langere levensduur: -Duralens : max. absorptie ≤0,2%; standaard gele lens. -Black Magic : max. absorptie


Lens cleaning tips

Centricut supplies suitable for all OEM CO2 and fiber laser lenses• Lens maintenance base is designed to secure a

wide range of optics sizes for the cleaning process• Centricut optical cleaning fluid is a safe,

economical alternative to traditional high-purity and reagent-grade solvents

• Cleaning materials suited for all lens cleaningneeds; lens paper, polyester swabs and polyester wipes

Lens paperRecommended for the routine maintenance cleaning of flat lenses.

Polyester swabsRecommended for cleaning curved lenses and where a more aggressive cleaning is required (interchangeable with polyester wipes).

Polyester wipesRecommended for cleaning CO2 and fiber lenses and windows (interchangeable with polyester swabs and lens paper).

Product description Part number Quantity per order

Optical cleaning fluid (3 oz.) TR300-1112 1Lens cleaning swab TR300-0699 25Lens cleaning paper, Tiffen TR300-6452 50Polyester wipes 4" x 4" TR300-7991 100Base, lens maintenance TR300-271 1

To get startedUsing rubber gloves, place the lens in the lens holder and remove all loose contaminants with an air bulb. When contaminants are no longer visible, begin the cleaning process.

Step 1Place lens paper over the optic, covering it completely.

Step 2 Apply a couple drops of lens cleaning fluid to the lens paper (far side of the lens).

Step 3 Slowly pull the lens paper across the lens so the cleaning fluid comes in contact with the entire lens surface. Finish pulling the paper across so all of the fluid has dried from the lens.

Step 4 Inspect the surface of the lens for dust and cleaning residue using a flashlight. Examine the lens from different angles. Repeat the process on the other side of the lens.

Lens paperRecommended for the routine maintenance cleaning of flat lenses.

Final step:Place the cleaned lens in the machine quickly to avoid contamination from airborne particles. If spots, pits, or scratches are still noticeable, the lens may need to be replaced.

You will need:• Lens maintenance base

(lens holder)• Optical cleaning fluid

• Air bulb• Lint-free lens paper• Latex or rubber gloves

31


Polyester swabsRecommended for cleaning curved lenses and where more aggressive cleaning is required. Interchangeable with polyester wipes.

Step 1Place a few drops of the optical cleaning fluid onto the swab.

Step 2 Move the larger dirt particles and then finer contaminants to the edge of the lens using the swab. Do not rest the swab on the lens or on the work table. Do not reuse swabs.






• Air bulb• Polyester swabs• Latex or rubber gloves

Step 1Place a few drops of the optical cleaning fluid onto the polyester wipe

Step 2 Place the wipe with the wet side down on the lens and slide it across the lens, applying light pressure to the top of the wipe. Avoid contamination to the wipe and do not reuse wipes.


Polyester wipesRecommended for cleaning CO2 and fiber lenses and windows. Interchangeable with polyester swabs and lens paper.





• Air bulb• Polyester wipes• Latex or rubber gloves

32


Steps to help optimize cut quality. Striation marks, angularity and dross tell the story.

Is the kerf too narrow?When the kerf is too narrow the cut will have a very smooth edge on the top, a lack of oxidation on the bottom and/or heavy dross.

Probable causes:• Focus is too low• Feed rate is too fast• Gas pressure is too low• Nozzle size is too small• Standoff is too low

Is the kerf too wide?When the kerf is too wide the cut will have a rougher edge, more self burning in the corners of the part, more angularity on the cut edge and occasionally, dross.

Probable causes:• Focus is too high• Feed rate is too slow• Gas pressure is too high• Nozzle size is too big• Standoff is too high• Incorrect nozzle type

Optimizing CO2 and fiber lasers to achieve maximum cut quality is a very important step in the overall cutting process. The critical points that produce good cuts are the width of the kerf (the material that is lost during the cut), oxidation and roughness of the cut surface, the geometry of the cut parts and the allowable tolerances. Some factors to be considered are the cut speed or ‘feed rate’, beam focus, gas pressure, standoff and nozzle size/type.

Factory cut chart settingsThe following samples show 12 mm, 6 mm and 3.2 mm (1/2", 1/4" and 10 ga.) mild steel, cut with O2 on a 2 kW fiber laser with one variable changed to show how cut quality is affected. The adjustments will be similar for all CO2 and fiber laser, cutting mild steel with O2.

Follow these steps to optimize cut quality:1. Use the closest known settings for the material being cut.

2. Use a test part that has both interior and exterior features.

3. Verify that the lens and/or window is clean and in good condition.

4. Verify that the nozzle is centered properly and is in good condition.

5. Adjust the focus up and down until the cut quality starts to get bad and thenset to the middle of that range.

6. Adjust the gas pressure up and down until the cut starts to get bad and thenset to the middle of that range.

7. Adjust the federate up by 5% increments. When the cut starts to get bad, setthe feed rate 10% slower.

Strike a balance between heat levels and gas flowCutting mild steel with a laser is a balance of how much material is heated by

the laser beam and how much assist gas flows through the cut.

• Heating up too small of an area, or not having enough assist gas flow throughthe cut will result with the kerf (width of the cut) being too narrow.

• Heating up too large of an area or having too much assist gas flow throughthe cut will result in the kerf being too wide.

33


3.2 mm (10 ga.) mild steel cut resulting in too wide kerf

Factory cut chart settings

Focus is too highThe laser is melting more material than can be removed from the cut.

Feed rate is too slowThe cut surface is too rough and productivity is decreased.

Gas pressure is too highToo much O2 results in overheating of the cut and causes intermittent gouges.

Stand off is too highThe laser is melting more material than can be removed from the cut.

Nozzle size is too bigToo much O2 results in overheating of the cut and causes intermittent gouges.


Focus is too lowThe kerf is too narrow and doesn’t allow enough O2 into the cut to remove all the molten material.Feed rate is too fastThe cut striations are trailing the direction of cutting and there is not enough time to remove all the molten material.

Gas pressure is too lowThere is not enough O2 to remove all the molten material.

Stand off is too lowThe focus spot is in the wrong location, causing the rough edge.

* Above samples have been cut with O2 on 2 kW fiber laser. Results will be similarfor CO2 laser cutting mild steel with O2.

Cut direction Cut direction

3.2 mm (10 ga.) mild steel cut resulting in too narrow kerf

34


6 mm (1/4") mild steel cut resulting in too wide kerf


Focus is too highThe wider focus spot is letting too much O2 into the cut and burning the material.

Feed rate is too slowThe cut surface is too rough and productivity is decreased.

Gas pressure is too highToo much O2 is entering the cut, causing a rougher edge and inconsistent cutting.

Stand off is too highToo much O2 is entering the cut, causing a rougher edge and inconsistent cutting.

Nozzle size is too bigToo much O2 results in overheating of the cut and causes intermittent gouges.

Nozzle type is incorrectThe shape of the gas flow is incorrect, causing a rougher edge.


Focus is too lowThe kerf is too narrow and doesn’t allow enough O2 into the cut to remove all the molten material.Feed rate is too fastThe cut striations are trailing the direction of cutting and there is not enough time to remove all the molten material.

Gas pressure is too lowThere is not enough O2 to remove all the molten material.

Stand off is too lowThe focus spot is in the wrong location, causing the rough edge.

Nozzle size is too smallThere is not enough O2 to cut uniformly



6 mm (1/4") mild steel cut resulting in too narrow kerf

35



Stand off is too lowThe kerf is too narrow to allow enough O2 into the cut. The oxidation is not covering the entire surface and cutting will be inconsistent.

Nozzle size is too smallThere is not enough O2 to cut uniformly



Focus is too lowThe kerf is too narrow and doesn’t allow enough O2 into the cut to remove all the molten material.

Feed rate is too fastThe machine is moving too fast to allow enough O2 into the cut for consistent cutting.

Gas pressure is too lowThe pressure is too low to allow enough O2 into the cut. The oxidation is not covering the entire surface and cutting will be inconsistent.


12 mm (1/2") mild steel cut resulting in too narrow kerf

36



Stand off is too highToo much O2 is entering the cut resulting in intermittent over burning.

Incorrect nozzle typeThe gas flow shape is not correct resulting in inconsistent cutting.


Focus is too highToo much O2 is entering the cut causing intermittent over burning.

Feed rate is too slowThe machine is moving too slow resulting in the over burning of the bottom half of the cut. The slower feed rate also reduces productivity.

Gas pressure is too highToo much O2 is entering the cut resulting in intermittent over burning.


12 mm (1/2") mild steel cut resulting in too wide kerf


37

2018 catalog Laser Precitec Talas 2018.pdf · 2019. 9. 30. · PT348-1053 AL380 P0571-1051-00001, 6930281333 PT-Nozzle holder KT B2 Con 1 2 PT348-1330 Recommended AL131 281330, P0571-260-00001,

Documents

2018 catalog Laser Precitec Talas 2018.pdf · 2019. 9. 30. · PT348-1053 AL380 P0571-1051-00001, 6930281333 PT-Nozzle holder KT B2 Con 1 2 PT348-1330 Recommended AL131 281330, P0571-260-00001,