2
Notice
This presentation is provided to all Educational Service District 101 (ESD 101) schools at no cost.
This presentation contains copyrighted materials purchased by ESD 101 for the exclusive use of training school personnel within ESD 101.
This presentation may not be reproduced except to print “handouts” or “notes pages” for use during training within ESD 101 school districts.
If the school district does not have Microsoft’s PowerPoint software available, a PowerPoint viewer can be downloaded from the internet at no cost.
Questions may be directed to the ESD 101 Risk Manager.
3
Hazard Recognition
Tools are common in “day-to-day” life Difficult to spot hazards due to familiarity Most tools manufactured with safety devices Users must inspect the tool daily Often misused
4
Examples of Misuse
Using a screwdriver as a chisel
Using tools with loose handles
Wrenches with sprung jaws
5
General housekeeping Use of personal protective equipment (PPE) Spark shield and protection around
flammables Don’t use tools near aisleways
Other Safety Factors
7
General Power Tool Precautions
Never carry a tool by the cord or hose Never yank the cord to unplug it Keep cords and hoses away from heat, oil,
and sharp edges Disconnect tools when not in use Make sure observers are at a safe distance Secure work with a vise or clamp
8
General Precautions (cont.)
Keep tools sharp and lubricated
Do not wear loose clothes, ties, jewelry, etc.
Mark or tag all damaged tools with “Do Not Use”
9
Guarding Requirements
Belts Gears Shafts Pulleys Sprockets Spindles Drums
Flywheels Chains Other moving parts
10
Guards Protect Against:
Guards will provide protection for operatorsfrom the following hazards: Point of operation In-running nip points Rotating parts Flying chips and sparks
11
Power Tools Requiring Momentary Switches
Drills Tappers Fastener drivers Horizontal, vertical, and angle grinders Disc and belt sanders Reciprocating saws Saber saws
Note: These tools can have a “lock-on” switch that turns off with a single finger motion
12
Safety With Electric Tools
Operate them within their design limitations Gloves and footwear are recommended When they’re not in use, store them in
a dry location Do not use them in wet or damp locations Work areas should be well lighted
13
Safety With Power Grinders
Always use eye protection Turn off power when it’s not in use Never clamp a hand-held grinder in a vise
15
Safety With Powder-Actuated Tools
Do not use in an explosive or flammable atmosphere
Inspect the tool prior to use Never point the tool at anyone Load the tool only when it is going
to be used Keep hands clear of the barrel end
16
Safety With Jacks
Set up a jack so that the base rests on a firm level surface
Make sure the jack is centered Ensure that the jack head is against
a level surface Be certain the lift force is applied evenly
17
The Five Basic Rules for Power Tools
Keep all tools regularly maintained Use the right tool for the job Examine each tool for damage
before use Operate tools in accordance with
the manufacturer Provide and use the proper personal
protective equipment
18
QUIZ
1. There are several types of power tools, including ___________________ and __________________.
2. It is okay to put a portable grinder in a vise as long as it is tightened securely. True or False
3. Most hazards associated with hand tools are easy to spot because we very seldom would use a tool in “day-to-day” life. True or False
4. Guards should offer protection from _______________, _____________, rotating parts, and flying chips or sparks.
5. Tools requiring momentary on/off switches can never have a lock-on switch. True or False
19
Quiz (cont.)
6. When using grinders you should always wear eye protection. True or False
7. Never use electric tools in ___________ conditions.
8. Parts on tools that should be guarded include __________, __________, and ____________.
9. Because powder-actuated tools use small explosive charges, it is okay to use them in explosive atmospheres. True or False
10.When not in use, power tools should be ___________________________________.
20
Quiz Answers
1. There are several types of power tools, including electric, pneumatic, liquid fuel, hydraulic, and powder-actuated.
2. False. You should never place a portable grinder in a vice.
3. False. The hazards are difficult to spot because they become so routine.
4. Guards should offer protection from point of operation, in-running nip points, rotating parts, and flying chips or sparks.
5. False. Tools requiring momentary on/off switches can have a lock-on switch if they can be activated with one finger.
21
Quiz Answers
6. Never use electric tools in wet conditions.7. True. You must always wear eye protection when
using a grinder.8. Parts on tools that should be guarded include
belts, gears, shafts, pulleys, sprockets, spindles, and drums.
9. False. Powder-actuated tools should never beused in flammable or explosive atmospheres.
10.When not in use, power tools should be disconnected.