- In year 1832 foundation of forge by Archduke Karol Ludwik Habsburg.
- In 1837 transformation from forge into pig iron processing works named Fryderyk’s Ironworks.
- In 1912 creation Austrian Public Limited Company for Bolts and Forged Articles Factory “Breviller” and “A. Urban and Sons” Company, with head office in Vienna – production of first bolts.
- During II World War, destruction of the factory in 70%; resumption of production from the 1st July 1945.
- On the July 2005 Company gained new owner, which is “Srubena Unia” S.A. - 30.12.2006 r. came economic change from Bolt’s Company „ŚRUBENA-PRODUKCJA” Ltd. into Public Limited Company, through merger with ŚRUBENA UNIA S.A.
Company’s History
ŚRUBENA UNIA S.A. - nowadays
Company’s History
-The company is second fasteners producer in Poland and belongs to the tenth of the biggest European manufacturers of fasteners.
- Monthly production is ~ 1 400 tons
- Employment: 416 employees.
- Annual turnover: 20 – 25 million euros.
- Sales:- Export 60%- Domestic 40%
- The Company is the only manufacturer of fasteners in Poland applying both cold as well as hot forging technologies
- Qualified staff and well maintained machinery guarantee an efficient production and the highest quality.
Company’s characterization
Shareholders ŚRUBENA UNIA S.A.
ZETKAMA S.A.87,58%
Management GroupBoard of Directors,
Managementand Staff12,42%
Composition of the Board of Directors:
- President of the Board Andrzej Herma- Vice President of the Board Tadeusz Żydek
Composition of Management:
-Development Manager Piotr Nowak- Logistic Manager Grzegorz Jurasz- Marketing Manager Tadeusz Jopek- Financial Manager Mariusz Kaminski
PRODUCTION ORGANIZATION
CHEMICAL TREATMENT
AND DRAWING
SURFACE TRERATMENT
HEAT TREATMENT
HOT FORGING(BOLTS AND
NUTS)
RAW MATERIAL
STOCKCOATING
COLD FORGING(BOLTS)
ŚRUBENA’s UNIA S.A. production programme covers a wide range of standard parts acc. to PN, DIN ANSI, BS, GOST, ISO, EN and customers drawings.
Production Range
Bolts:
DIN 931/ISO 4014 M 5 – M 36, length 25 – 700, GRADES: 4.6 up to 10.9
DIN 601 M 5 – M 36, length 25 – 700, GRADES: 4.6 up to 8.8
DIN 7990 M12 – M 36, length 25 – 700, GRADES: 4.6 up to 8.8
DIN 933/ ISO 4017 M 5 – M 36, length 10 – 240, GRADES: 4.6 up to 10.9
DIN 558 M 5 – M 36, length 10 – 240, GRADES: 4.6 up to 8.8
DIN 912 M 5 – M 20, length 16 – 140, GRADES: 4.6 up to 10.9
DIN 603 M 5 – M 16, length 20 – 620, GRADES: 4.6 up to 8.8
Grade 12.9 also is considered
Nuts: DIN 555 M 12 – M 36, GRADE: 5
DIN 934/ISO 4032 M 12 – M 36, GRADES: 5 up to 10
STANDARD PARTS
SPECIAL AND DRAWING PARTS
FASTENERS FOR RAILWAY TRACK
- Friction bolts acc. to DIN 6914 property class 10.9
Diameters from M12 to M36Lengths from 30 mm to 400 mm
- Nuts under DIN 6915 acc. to property class 10
Diameters from M12 to M36
- Washers acc. to DIN 6916acc. to above mentioned diameters
DIN 6914- HV10.9
HV BOLTS
Friction bolts acc. to norm EN 14399-1÷6 harmonized to UE Directive no. 89/106/EWG
In the entire scope of the norm from M12 to M36
In HV i HR system - certificate with sign of the safety HV i HR BOLTS
1234
Protective coatings:
OiledOil black oxidedPhosphatedZinc plated :
Hot Dip Galvanised acc. to ISO 10684Electrolytic zinc coating acc. to PN-EN ISO 4042
DACRO 320 i 520,DELTA-PROTEKT, DELTA-TONE, DELTA-SEAL
Lubricating coatings:Gleitmo (colourless or black with the addition of MoS2 dry spreadable film about the determined coefficient of the friction )
Pre-application coatings::LOCTITE, PRECOTE, SCOTCHGRIP
The kinds of surface finishing
Applied Coatings
Sales development directions within new assortments scope:
New assortment:
• studs• weld bolts• products acc. to recipient’s technological
specification• products for automotive industry
New protective coatings:
• Dacromet, Geomet, Delta Tone, Magni, Zintek• galvanic galvanizing with high rustproof resistance
/ZnNi, ZnFe/• pre-application coatings / Loctite, Scotch Grip,
Precote, Eslok/
• Reyher• Wuerth• Boellhoff• Kobout• Asmet• Keller Kalmbach• Bossard• Bufab• Civata• Anixter• Iron Trade• Metalcom• Kirchhoff• Paulstra• Metal Holding• Huta Łabędy• Deutsche Bahn• Vossloh, Vossloh Nordic• SBB - Schubart• PKP PLK• Energoport
Main Recipients:
The certificates presently issued:
- Automobile industry Certificate: ISO TS 16949:2002- Quality Management System: EN ISO 9001:2000- Certificate for high pressure usage: AD2000 – Merkblatt W 0 /TRD 100- System certificate for high pressure usage: 97/23/EG- Ü Certificate for construction engineering - Certificate HPQ for railways- Certificate Q1 supplier for German Railways - Environmental Certificate ISO 140001:2004- Certificate for HV and HR friction sets
EN 14399-1:2007
THANK YOU VERY MUCH FOR YOUR ATTANTION