该单元的内容
• PPMS MultiVu
• PPMS Option Control Center
• PPMS MultiVu Simulation
• PPMS Tools
• PPMS Helium 3 Gas Monitor
测量控制平台测量控制平台
硬件设置、监控数据格式转换
硬件设置、监控数据格式转换
He-3 专用
He-3 专用
需要关注的内容
1. 如何设定 温度、磁场、位置、样品室气氛
2. 测量选件 启动、自身检测、关闭
3. 测量程序 编辑 ( 通用命令、专用命令 ) 、名称、位置、执行、暂停、中断
4. 数据文件 位置、种类、格式、查看方式、转换方法
PPMS MultiVu 界面PPMS MultiVu 界面
界面以及各菜单中的内容在不同的状态会有些不同PPMS MultiVu
PPMS MultiVu_Simulation Mode
Option Activated
界面以及各菜单中的内容在不同的状态会有些不同PPMS MultiVu
PPMS MultiVu_Simulation Mode
Option Activated
PPMS MultiVu Software Version
PPMS MultiVu 1.2.0 Build 5
PPMS MultiVu 1.3.0 Build 8PPMS MultiVu 1.3.0 Build 8
Latest
Compiled
July 27, 2001
PPMS Software Version
VersionSoftware
Up to October 15, 2003
In Use Upgrade/Latest
PPMS MultiVu 1.2.0 Build 5 1.3.0 Build 8
AC Transport 2.2.0 Build 12 2.2.1 Build 4
Heat Capacity 2.5.6 Build 8 2.7.1 Build 0
Helium-3 1.2 1.3.3
Thermal Transport 1.0.0 Build 4 1.1.1 Build 2
ACMS 32-Bit 1.0.9 Build 14
Low Field 1.1.0 Build 0
Torque Magnetometry 2.0.2
Instrument & Utilities
Temperature…Field…Chamber…Motion Control…Analog Output…Digital Output…Current Drivers…Bridge Channels…Shutdown…
Activate…Configure Option…Log PPMS Data…Upload…Send GPIB Commands…Magnet
Error Handling…Event Log…
Helium Fill…
MultiVu
Instrument & Utilities
Temperature…Field…Chamber…Motion Control…Analog Output…Digital Output…Current Drivers…Bridge Channels…Shutdown…
MultiVu
-8.512 371.442
Instrument & Utilities
Temperature…Field…Chamber…Motion Control…Analog Output…Digital Output…Current Drivers…Bridge Channels…Shutdown…
MultiVu
Instrument & Utilities
Activate…Configure Option…Log PPMS Data…Upload…Send GPIB Commands…Magnet
Error Handling…Event Log…
Helium Fill…
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
线路连接图
线路连接图
Available Options: Active Options:
Option Manager
AC TransportACMSHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Heat CapacityActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
MultiVu
Instrument & Utilities
Activate…Configure Option…Log PPMS Data…Upload…Send GPIB Commands…Magnet
Error Handling…Event Log…
Helium Fill…
MultiVu
Magnetic Field
Rate
9.2 ~ 42.6 Oe/sec
依赖于B/I
电感电压
Approach
S c a n F
i e l d
S e t F
i e l d
Linear 快
No Overshoot 中
Oscillate 慢
Sweep 快
End Mode
Persistent 闭环
Driven
(Hysteresis)开环
达到设定磁场
速率 磁体中电流变化方式 后磁场保持模式
Field
Magnetic Field
当前磁场
变场速率
Persistent Driven
SW Warm
SW Cool
SWTC Err
Charging
Discharging
Iterate
Persistent Holding
Chrg Err
Curr Err
Failure
Quench
Linear
No Overshoot
Oscillate
Sweep
设定磁场
Field
Scan Field
Spacing Code
Uniform Code H 等间隔
H*H Code H2 等间隔
H1/2 Code H1/2 等间隔
1/H Code 1/H 等间隔
Log(H) CodeH 对数等间
隔
Field
Process of Setting Field_Approach
Mode
Charging / DischargingSet Rate Approach Mode
Field
time
Holding: Driven
Switch Warming: Persistent (20
Sec)
Present
Setpoint
Linear
Sweep (Scan)
No O’Shoot70 %
Oscillate30 %
Process of Setting Field_End
Mode
Current of Power Supply
time
HoldingDriven
Switch Cooling: Persistent (20
Sec)
I = 0.0
ISetpoint
Sweep ?
Linear No O’Shoot Oscillate Sweep
Driven & PersistentSet Point
End PointDriven & Persistent
Measurement_Approach_End
Mode
Field
time
HoldingDriven
Persistent Mode
I = 0.0
ISetpoint
Sweep (Scan)
测量开始 / 结束
t
H
测量开始 / 结束
t
开始 / 结束测量
t H = 0
H = 0H = rate × t
Temperature
Rate
0.01 K/min
~20.00 K/min
Typical:
12.00 K/min
Mode or Approach
Scan T
emperature
Set T
emperature
Fast Settle 快
No Overshoot 慢
Sweep 快
达到设定温度
速率 变温方式
Temperature
Temperature
当前温度
变温速率
指 示 含 义Chasing 达不到设定速率Tracking 按照设定速率Near 确认温度稳定性Stable 温度已经稳定Potops 液氦储槽操作Standby 关闭温度控制Unknown 检修、转换Fault 温度系统错误Impedfail 流阻故障ImpCtrl 流阻加热故障ImpCool 流阻冷却故障
Fast Settle
No Overshoot
Sweep
设定温度
Temperature
Scan Temperature
Spacing
Uniform Code T 等间隔
1/T Code 1/T 等间隔
Log(T) Code T 对数等间隔
Temperature
见本系列《超导量子磁强计》
Temperature“Complicated” -《 Manual 》 Quantum Design“Complicated” -《 Manual 》 Quantum Design
High-Temperature
Control
High-Temperature
Control
4.2 K
2.2 K
400 K
1.8 K
Low-Temperature
Control
(Pot Mode)
Low-Temperature
Control
(Pot Mode)
Continuous
Low-Temperature
Control
(CLTC)
Continuous
Low-Temperature
Control
(CLTC)
尽量避开
Temperature
PPMSMPMS
PPMS 的各种 “ Temperature”Temp (The temperature) Depending on option used
Sys Temp (System temperature) Cernox or Platinum thermometer
Setpoint Target temperature
CIG/Cernox Low-temperature thermometer
Plat Therm High-temperature thermometer
Neck Therm Neck thermometer
Spare Therm System bridge channel 4 resistance
Map 20 - Map 29 User-designated data items
Sample Temperature Temp
User Temperature TempTemperature
PPMS 的温度计位置Neck Thermometer
Cernox / PlatinumThermometer
Option Thermometer
TempSys Temp
Map 20 – Map 29Sample Temperature
Sys Temp
Block Temp
Sys Temp
Block TempTemperature
PPMS 的各种 “ Temperature”
Temp Sample Temperature
Sys Temp
DC_R
ACT
Map 20 ~ Map 29
HC TTO
ACMS
Horizontal Rotator He-3 Refrigerator
Tq-Mag DC_R ACT HC
CernoxPlatinum
CernoxPlatinum
CernoxCernox
25
23
23DC_R ACT
2727
PPMS 的各种 “ Temperature”
Standard Horizontal Rotator He-3
Base Sys Temp Rotator (User) Temperature He-3 Temp
DC_R Sys Temp User Bridge Channel 1 Channel 3
ACT Sys Temp Map 23 System Bridge Channel 4 Map 27
HCMap 27 (Sample Temperature)
(Puck Temperature, Platform TemperatureMap 27
TTOSys Temp (Sample Temperature)
[Hot: Map 21 (Channel 1); Cold: Map 22 (Channel 2)]
ACMS Map 25
Tq-Mag Rotator (User) Temperature Map 23
Temperature
从高温降温至 10 K 以下的操作
Set Temperature 10.00K at 12.00K/min. Fast Settle
Wait For Temperature, Delay 120 secs, No Action
Set Temperature 10.00K at 12.00K/min. Fast Settle
Wait For Temperature, Delay 120 secs, No Action
Set Temperature 1.80K at 1.00K/min. Fast Settle
Wait For Temperature, Delay 0 secs, No Action
Set Temperature 1.80K at 1.00K/min. Fast Settle
Wait For Temperature, Delay 0 secs, No Action
温度高于 100 K 时,先降温至 10 K ~ 15 K
在 10 K ~ 15 K 停留一段时间,再降温
!!!
Chamber Atmosphere样品室压
强
液氦液面
指 示 含 义Purging 正在抽气Purged 抽气结束,已封闭Sealed 已封闭Vented 充气结束,已封闭Venting 正在充气Pumping 持续抽气Flooding 持续充气Pre-Hi Vac 高真空预抽气At HiVac 处于高真空Failure 样品室操作故障HiVac Error 高真空故障
Chamber
温度 ~ 300 K
磁场 < 1.0 T
Chamber Atmosphere
Dew
ar
Pum
p
Chamber
VentValve
FlushValve
He Gas
Flush
ValveVent Valve
Seal 只是关闭
Purge/Seal 开-关 3 次,最后关
Vent/Seal 关 先开后关
Pump Cont. 开 关
Vent Cont. 关 开
HiVac 预抽开 关Chamber
温度低于 295 K 时不要执行 Purge/Seal
!!!温度低于 295 K 时不要执行 Purge/Seal
!!!
Motor: Stepper & ServoHorizontal Rotator: Stepper MotorHorizontal Rotator: Stepper Motor
ACMS : Servo Motor ( 伺服马达 )
ACMS : Servo Motor ( 伺服马达 )
Position
Move to
Location
SpeedPosition
Move to
IndexL
角 度
长 度
磁场
样品
Motor
Motion Control
-8.512-8.512
马达状态马达状态
马达位置马达位置
最大角度最大角度马达转动状态指示
设定位置设定位置
重新定义当前位置重新定义当前位置
3 2
1
Motion
Install Horizontal Rotator Hardware
Remove Horizontal Rotator Hardware
1. 运行 PPMS Tools 中的 MonQD6000.EXE
2. 在 Send to PPMS 菜单中点击 Send Config3. 选择 C:\Qdppms\Horizontal Rotator\Config\ 中的相应设置文件
DC_R/Tq-Mag: ACT/HR
HR136.CFG HRACT136.CFG
2. Send GPIB Commands
USERTEMP 0. USERTEMP 0.
1. MonQD6000.EXE 1. Utilities
关闭温度计!!!
HR
PPMS 的术语图解Field: Linear, No Overshoot, Oscillate, SweepField: Linear, No Overshoot, Oscillate, Sweep
测量开始测量开始
Oscillate
Fast Settle
Oscillate
Fast Settle
No O’shootNo O’shoot
LinearPause
LinearPause
SweepSweep
时间
温度磁场角度
设定点设定点
Temperature: No Overshoot, Fast Settle, SweepTemperature: No Overshoot, Fast Settle, Sweep
Stepper Motor: Pause, SweepStepper Motor: Pause, Sweep
MultiVu
PPMS Data Files
PPMS Log Data File
• PPMS Configuration File
• Upload Data File
• Helium Data File
Raw Measurement Data File
Measurement Data File
PPMS Log Data File
• PPMS Configuration File
• Upload Data File
• Helium Data File
Raw Measurement Data File
Measurement Data File
Data & Files
PPMS Log Data File
• 用于 PPMS 诊断
Data & Files
时间
系统状态
磁体控制
温度控制
压强控制
流量控制
各种驱动器状态
PPMS 选件温度、电流等
时间
系统状态
磁体控制
温度控制
压强控制
流量控制
各种驱动器状态
PPMS 选件温度、电流等
Advanced Items
Raw Measurement Data File
• 用于 Measurement 诊断
• 不同的选件会有不同的格式
• 文件的大小:可能很大
• 必要性:一般不需要
• 用于 Measurement 诊断
• 不同的选件会有不同的格式
• 文件的大小:可能很大
• 必要性:一般不需要Data & Files
Measurement Data File• 数据格式取决于所用的 PPMS 选件
Data & Files
DC_RDC_RACTACT
Tq-MagTq-Mag
ACMSACMS
HC 无自选数据HC 无自选数据
TTO 无自选数据TTO 无自选数据
Measurement Data File• 数据需要转换为按列的形式
Data & Files
[Header]; Copyright 1997-99, Quantum Design, Inc. All rights reserved.FILEOPENTIME, 13199968.28, 6/3/2003, 9:38 AMBYAPP, LogData, 1.0, 2.0INFO, APPNAME, PPMS MultiVu Application, Release 1.2.0 Build 5。。。
DATATYPE, TIME, 2DATATYPE, COMMENT, 1[Data]Comment,Time Stamp (sec),Status (code),Temperature (K),Magnetic Field (Oe),Sample Position (deg),Bridge 1 Resistance (ohms),Bridge 1 Excitation (uA),Bridge 2,13199968.36,4374,296.2498,-0.149,-8.512,,,,,,,,,-0.0049,-0.0147,48,0.00,0.00,0.00,0.00,1.1262168,,,,,,301.6772461,,308.7025452,,,4374,300.000,-。。。
[Header]; Copyright 1997-99, Quantum Design, Inc. All rights reserved.FILEOPENTIME, 13199968.28, 6/3/2003, 9:38 AMBYAPP, LogData, 1.0, 2.0INFO, APPNAME, PPMS MultiVu Application, Release 1.2.0 Build 5。。。
DATATYPE, TIME, 2DATATYPE, COMMENT, 1[Data]Comment,Time Stamp (sec),Status (code),Temperature (K),Magnetic Field (Oe),Sample Position (deg),Bridge 1 Resistance (ohms),Bridge 1 Excitation (uA),Bridge 2,13199968.36,4374,296.2498,-0.149,-8.512,,,,,,,,,-0.0049,-0.0147,48,0.00,0.00,0.00,0.00,1.1262168,,,,,,301.6772461,,308.7025452,,,4374,300.000,-。。。
[Header]
[Data]
系统给出的检测数据
Time Stamp (sec)Status (code) Temperature (K) Pressure () Map 25 () System Status (code) Valve Position (deg) Plat Therm (K)
13199968.36 4374 296.2498 1.1262168 301.6772461 4374 30.6 296.2498169
13199973.31 4374 295.9384 1.0962939 301.6706543 4374 32.5 295.9383850
13199978.31 4374 295.5389 1.1105099 301.6508484 4374 35.5 295.5389099
13199983.38 4374 295.2121 1.1105099 301.6277466 4374 37.3 295.2120972
Time Stamp (sec)Status (code) Temperature (K) Pressure () Map 25 () System Status (code) Valve Position (deg) Plat Therm (K)
13199968.36 4374 296.2498 1.1262168 301.6772461 4374 30.6 296.2498169
13199973.31 4374 295.9384 1.0962939 301.6706543 4374 32.5 295.9383850
13199978.31 4374 295.5389 1.1105099 301.6508484 4374 35.5 295.5389099
13199983.38 4374 295.2121 1.1105099 301.6277466 4374 37.3 295.2120972转换后的检测数据
所有的数据处理软件都可以识别
ExportData.exe
PPMS 的数据与管理
Data_View
RecordTableRaw Data
Status Bar ToolbarSequence ControlSequence Command BarACMS Status Log
Open…Restore GraphDefault GraphApply Template…Save TemplateSave Template As…
Data SelectionAppearance Zoom PreviousAuto Scale All Plots
+ Graph View
ACMS ActivatedACMS Activated
*.Dat : 数据文件 *.Gph :图形文件 *.Raw :原始过程数据
*.Graph 文件不是自动生成
1 、点击 Data 中的 View;2 、 Graph 菜单中打开 *.Dat
Time Stamp & System Status
• Time Stamp (sec) : since midnight, January 1 of the current year
Time Stamp (sec) Status (code) Temperature (K) Pressure ()
13199968.36 4374 296.2498 1.1262168
13199973.31 4374 295.9384 1.0962939
Time Stamp (sec) Status (code) Temperature (K) Pressure ()
13199968.36 4374 296.2498 1.1262168
13199973.31 4374 295.9384 1.0962939
• System Status (Code)
System Controls : temperature, magnet,
chamber, and sample position
June 2, 2003 at 18:39:28 ?June 2, 2003 at 18:39:28 ?
Data_Time Stamp
2003年 6月 3日 上午 9:38 ?2003年 6月 3日 上午 9:38 ?
System Status (Code)
Time Stamp (sec) Status (code) Temperature (K) Pressure ()
13199968.36 4374 296.2498 1.1262168
Time Stamp (sec) Status (code) Temperature (K) Pressure ()
13199968.36 4374 296.2498 1.1262168
0001 0001 0001 0110
212 = 4096
Sample Position Chamber Pressure Magnetic Field Temperature
28 = 256 24 = 16 22 = 4
Table A-2 in Appendix A: Data File Structures of PPMS Manual : Firmware Manual
at target position purged and sealed stable/persistent not valid
Data_Status
21 = 2
PPMS 32-bit Tools• 桌面 TOOLS 文件夹中 23个文件
Tools
ErrorLog.txt ExportData.exe EXPORTDATA.INI
EyeSys.cal fix1632lock.reg Gasmon32.exe
gauge.exe MagCalWizard.exe Magdiag2.exe
Mon6000.exe Mon6500.exe MRCalWizard.ini
MRCalWizard.pdf MRCalWizard.wsc PPMSScript.inc
Remote32.exe Romcfg32.exe Table2d.exe
Table2d.hlp Tables.cat Tables32.EXE
Temp.eng WizardState.inc
ExportData.exe
Tools
1. 运行 TOOLS 中的 ExportData.exe;2. 确定原始数据文件和输出的数据文件;3. 选择感兴趣的数据及其相对顺序;4. 选择数据分隔方式(空格、制表位、逗号);5. 选择数据列的名字( Column Title)的格式;6. 点击 Export 按钮。
Gasmon32.exe1. 用于监测系统温度 _ 气体控制。2. 不要关闭。
Sequence
• 命令的关系: Sequence与 Immediate
Sequence
ImmediateSequence
PPMS MultiVu & Model 6000PPMS MultiVu & Model 6000
Sequence 的组成
Sequence
HC MeasurementLogPpmsData
通用命令
专用命令
通用命令
专用命令
System CommandsAdvanced CommandsLogPpmsData
System CommandsAdvanced CommandsLogPpmsData
Measurement CommandsMeasurement Commands
几个命令• Wait
• Scan Time
• Shutdown
• Magnet Reset
Sequence
Uniform mode 等间隔
ln(t) mode 对数间隔
No Action 等待
Shutdown 关闭温控
Abort 停止程序
程序举例:磁性测量
Sequence
Scan Temp from 5.0K to 300.0K at 12.0K/min, in 60 steps, Uniform, Fast Scan Field from 0.0Oe to 10000.0Oe at 42.6Oe/sec, in 6 steps, Uniform, Linear, Persistent DC Mag 5 Scans Stickyrange Flags=33554439 AC Mag 100,1000,10000 Hz 2 Oe 1 Sec Stickyrange Flags=33554439
End ScanEnd ScanSet Field 0.0Oe at 42.6Oe/sec, Linear, PersistentShutdownEnd Sequence
5 K 0.0 Oe DC Extraction AC Magnetization 2000.0 Oe DC Extraction AC Magnetizaiton … …10 K 0.0 Oe… …
5 K 0.0 Oe DC Extraction AC Magnetization 2000.0 Oe DC Extraction AC Magnetizaiton … …10 K 0.0 Oe… …
Bit Flags
DC Mag 5 Scans Stickyrange Flags=33554439
Decimal Number
0000 0010 0000 0000 0000 0000 0000 0111
Binary Number
Map 31 ~ Map 20
225 = 33554432 Field
Temperature
General System Status
Table A-1 in Appendix A: Data File Structures of PPMS Manual : Firmware Manual
Map 25
PPMS 程序的运行控制
Sequence
Sequence Run
Sequence IdleSeq: Name.seq
Seq: <none>
No.: Set …
<none>
Run 正在运行Pause 暂停运行Abort 中断程序Lock 锁定当前状态
Lock Sequence
Locked by: Zhao lOther Information:
wait for me backwait for me back
LockLock CancelCancel
测量程序与数据文件的位置
C:\
… …
My Documents
Data Files
Group 201
John Smith
Sequences
C:\
… …
My Documents
Data Files
Group 201
John Smith
Sequences
File Location
Group 202Group 203Group 204Group 205
把程序文件和数据文件放在自己的子目录中。
把程序文件和数据文件放在自己的子目录中。
关于 PPMS - 14H 的选件PPMS Options
根据所使用的选件不同完成下列步骤: 1. 连接相应的信号采集线( Cable) Connection Diagrams
2. 启动相应的选件控制软件 Activate Option
3. 根据选件安放样品
选件及其控制软件见相应单元
根据所使用的选件不同完成下列步骤: 1. 连接相应的信号采集线( Cable) Connection Diagrams
2. 启动相应的选件控制软件 Activate Option
3. 根据选件安放样品
选件及其控制软件见相应单元Option
Activate Option
Activate…Configure Option…Log PPMS Data…Upload…Send GPIB Commands…Magnet
Error Handling…Event Log…
Helium Fill…
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
线路连接图
线路连接图
Option
Available Options: Active Options:
Option Manager
AC TransportACMSHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Heat CapacityActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
以热容量选件为例
Activate Option
Available Options: Active Options:
Option Manager
AC TransportACMSHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Heat CapacityActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Option
Available Options: Active Options:
Option Manager
AC TransportACMSLow FieldResistivityThermal TransportTorque Magnetometer
Heat CapacityHelium3Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
ACMSHeat CapacityLow FieldResistivityThermal TransportTorque Magnetometer
AC TransportHelium3Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityLow FieldThermal TransportTorque Magnetometer
ResistivityHelium3Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
热容量 + He - 3ACT + He - 3DC_R + He - 3
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Activate Option
Option
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityThermal Transport
Torque MagnetometerActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityTorque Magnetometer
Thermal TransportActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
AC TransportHeat CapacityHelium3Low FieldResistivityThermal TransportTorque Magnetometer
ACMSActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
AC TransportHeat Capacity Helium3ResistivityThermal TransportTorque Magnetometer
ACMSLow FieldActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Torque MagnetometerThermal TransportACMSACMS + Low Field
Available Options: Active Options:
Option Manager
AC TransportHeat CapacityHelium3Low FieldResistivityThermal TransportTorque Magnetometer
ACMSActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityThermal TransportTorque Magnetometer
Activate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Available Options: Active Options:
Option Manager
AC TransportACMSHeat CapacityHelium3Low FieldResistivityTorque Magnetometer
Thermal TransportActivate -->>Activate -->>
<<--Deactivate<<--Deactivate
Connection
Diagrams
Connection
Diagrams
CloseClose
Deactivate Option
Option Thermal TransportThermal TransportACMSACMS