YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS DENSIT A/S Densit a/s 44, Rørdalsvej · P.O.Box 220 DK-9100 Aalborg Phone: + 45 98 16 70 11 Fax: + 45 99 33.

YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS

DENSIT A/S

Densit a/s44, Rørdalsvej · P.O.Box 220DK-9100 AalborgPhone: + 45 98 16 70 11Fax: + 45 99 33 77 88E-mail: [email protected]: www.densit.com


DENSIT A/S

In 1972 the cement plant Aalborg Portland launches the development project “new concrete” based on the assumptions that it is possible to develop cement-based materials with ultra high strength and durability


DENSIT A/S

The Densit® technology or the DSP-technology is invented and developed (DSP – Densified Systems with ultra-fine Particles)

0.01 mm

CEMENT PASTE(Cement particles and water)w/c = 0,50-0,70

SUPER PLASTIZISED CEMENT PASTE(Cement particles, Superplastiziser and water)w/c = 0,30-0,35

DSP TECHNOLOGY(Cement, Microsilica, Superplastiziser and water)w/p = 0,18-0,22

1 mm

10 mm

Microstructure

Thin section

Fracture surface

Concrete Densit®

0.01 mm

1 mm


DENSIT A/S

In 1978 the Densit® technology is patented

Compressive strength and porosity Development of compressive strength


DENSIT A/S

In 1983 Densit a/s is established as an independent company

Densit is owned by Illinois Tool Works Inc.

Today Densit exports 85% of its products to more than 30 countries world-wide

Through out the world Densit has a wide network of partners and trained applicators with thorough knowledge and experience with Densit® products and solutions

SubsidiaryDensit Asia Pacific, Malaysia

Sales office Densit Germany

Joint Venture USA


MISSION STATEMENT

Densit a/s fulfils the needsof specific market

segments for reinforcementof areas exposed to severe demands

which arecritical to the end user’s activities


MISSION STATEMENT

Densit values

Co-operation Competence Responsibility

Each Densit® product, service and the way we act towards our customers and colleagues reflect our commitment to the three Densit values

Customer policy

We speak from more than 20 years experience and with a global understanding

We respond to our customers quickly wherever they are in an approachable and friendly way


BUSINESS AREAS

Densit a/s has 20 years of experience in developing and selling high performance solutions based on our high strength and durable cement-based products

The Densit® high performance solutions are well-established solutions in thefollowing business areas:

Industrial Flooring Reinforcement of offshoreand Pavements oil & gas platforms Security Barriers Wear Protection

Offshore wind turbine foundations


BUSINESS AREAS

INDUSTRIAL FLOORING AND PAVEMENTS

Airports

Ports

Warehouses- and distribution centres

Fresh food industry

Heavy & light industry

Parking areas are subjected to heavy traffic


BUSINESS AREAS

INDUSTRIAL FLOORING AND PAVEMENT-PRODUCTS

Ferrotop™ (23-35 mm)

Densitop® ST (5-8 mm): Densitop® MT (8-12 mm): Densitop® LT (15-25 mm):

Ferrotop™ Densiphalt®:Standard

Densitop®:

All flooring products can by dyed in red, yellow, green or whiteAll flooring products can be sand saturated to increase the skid resistance


BUSINESS AREAS

WHAT MAKES DENSIT® FLOORING SOLUTIONS THE NATURAL CHOICE:

High wear resistance

No joints

High bearing capacity/resistant to point loads

High impact resistance

Impermeability

Resistance to freeze-thaw cycles

Ease of cleaning

Dust-free surface

Ability to withstand steam cleaning

Fast installation operational in occupation time

Early trafficking – 24 hours at 20°C


BUSINESS AREAS

OFFSHORE – OIL & GAS

Reinforcement of offshore oil and gas platforms

Extending lifetime of platform

Cost-effective structural repair

Upgrading of platform

Corrosion protection

Flexible and fast installation


BUSINESS AREAS

OFFSHORE - WIND

Offshore wind turbine foundations


BUSINESS AREAS

WEAR PROTECTION

Cement plants

Coal-fired power stations

Steelworks

Paper plants

Mineral sand - Processing


High erosive and abrasive wear resistance

Ability to be formed in any shape without vulnerable joints

Seamless graduation in lining thickness within a component

High thermal resistance

Flexibility in installation in components with complex geometry

Mechanical reinforcement ensuring that linings do not become dislodged

Quick usable

Quick installation time

The Densit® wear protection products can be either trowelled, cast or sprayed.Pre-lined components and insulation are also options.

DENSIT® WEAR PROTECTION SOLUTIONS OFFER UNIQUE PROPERTIES LIKE:

BUSINESS AREAS


BUSINESS AREAS

SECURITY BARRIERS Automatical teller machines (ATM’s)

Safes

Vaults


VISION

Densit a/s aims at continuous growth by:

Expanding the network of qualified partners within the core business areas over an increasing geographical area in order to serve the customers in the best way

Maintaining the technological leading position

Using at least 5% of the annual turnover for product development and research

Continuously developing new products and concepts based on customers requirements


ORGANISATION

HUMAN RESOURCESMARKETING

SALESFINANCE/IT/

PRODUCTION/QA

Densit a/s has more than 80 employees

SECURITY

WEAR-

PROTEC-

TION

INDUSTRIAL

FLOOR-

ING

BUSINESS

DEVELOPMENT

OFFSHORE

JOINT

VENTURE;

USA

DENSIT

GERMANY

DENSIT ASIA

PASIFIC,

MALAYSIA

YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS DENSIT A/S Densit a/s 44, Rørdalsvej · P.O.Box 220 DK-9100 Aalborg Phone: + 45 98 16 70 11 Fax: + 45 99 33.

Documents

densit flooring solutions

densit products

high strength

densit technology

world densit

high wear resistance

wellestablished solutions

high thermal resistance