Xtream Voice Remote Remote Instructions 1 Make sure your new Voice Remote is within 3 feet of the front of your TiVo ® box, and insert the batteries into the remote. 2 Press the TiVo button, located at the top of the remote, use the Left Arrow button to show the menu. Click Menu > Settings > Remote, CableCARD & Devices > Remote Control Setup > Remote Control Pairing. While on this screen, press the TiVo and Back buttons at the same time and Hold until the light at the top of the remote is solid red. When released the light starts flashing yellow/amber. When the light stops blinking, press the TiVo button to return to the Home Menu. Press the blue Voice button on the remote to confirm the blue Voice icon appears on your TV screen. Your TiVo box is now voice enabled. Note: If the voice icon does not appear go to Menu > Settings > Remote, CableCARD & Devices > Remote Control Setup > Reset Remote Control Pairing and select Unpair all remote controls and then repeat Step 2. 3 Perform a ‘Connect to TiVo’ by navigating to Home screen > left arrow to Menu > Settings > Network Settings > TiVo Service Connection.