This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Release Notes – Milestone XProtect® Device Pack Version 5.6
It is with great pleasure that Milestone Systems as of August 25th 2011 is shipping
Milestone XProtect Device Pack Version 5.6
IP Camera and Video Server Compatibility Overview
Cameras, firmware and feature entries highlighted in BOLD are new to this release.
This release note lists the devices in Device Pack 5.6 that are supported in the following systems:
• XProtect Basis 4.0 versions
• XProtect Go 1.0 – 2.0 versions
• XProtect Basis+ 4.0 - 6.5 versions
• XProtect Essential 1.0 – 2.0 versions
• XProtect Professional 4.0 - 8.0 versions
• XProtect Enterprise 5.0 – 8.0 versions
• XProtect Matrix 2.1 - 2.3 versions
Devices that are supported in XProtect Corporate are listed in the XPCO_DP56 Release notes.
MPEG4 is supported in XProtect Enterprise 5.5a or newer, XProtect Professional 4.5b or newer, XProtect Basis+ 4.0f or newer and XProtect Basis 4.0f or newer.
H.263 is supported in XProtect Enterprise 5.5c or newer, XProtect Professional 4.5c or newer, XProtect Basis+ 4.0g or newer and XProtect Basis 4.0g or newer.
H.264 is supported in XProtect Enterprise 6.5d or newer, XProtect Professional 6.5a or newer, XProtect Basis+ 6.5a or newer.
H.264 with interlaced field-encoding supported in XProtect Enterprise 8.0b or newer, XProtect Professional 8.0a or newer, Xprotect Essential 2.0a or newer and
XProtect Go 2.0a or newer.
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
360 Vision IP
Dome 320 20090317 1 MPEG4 0 / 0 - � Type 1 � - username -
ACTi ACD-2000Q 361 V3.03.01 4 JPEG
MPEG4
2 / 2
(VMD)
(V)
Alert
Port - - -
Two-
Way Admin -
2 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
3 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
4 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
1 MPEG4 0 / 0 - - - - - Admin Older firmware is no
longer supported.
5 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
ACTi CAM-5130 105 V1.12.00 1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
ACTi CAM-5140 105 V1.12.00 1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
ACTi CAM-5150 105 V1.12.00 1 MPEG4 0 / 0
- - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-5200
series 105
V2.02.05,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi CAM-5220
series 105
V2.02.05,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi CAM-5300
series 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-5320
series 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-5500 105
V2.05.01,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
6 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
7 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
8 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
9 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
10 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
11 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
12 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
13 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Adam 6050 129 1.27 0 - 12 / 6 Poll - - - - - Require a DLK like all
other devices
14 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Adam 6060 108 1.21 0 - 6 / 6 Poll - - - - - Require a DLK like all
other devices
Adam 6066 108 1.04 0 - 6 / 6 Poll - - - - - Require a DLK like all
other devices
AgileMesh 100 145 NO-2.3.1b-
4M-M 1 JPEG 0 / 0 - - - - - admin -
American
Dynamics
VideoEdge Dome
157 1.44 1 JPEG
MPEG4 0 / 0 - - - - - admin -
American
Dynamics
VideoEdge IP Box
Camera
157 1.44 1 JPEG
MPEG4 0 / 0 - - - - - admin -
APPRO LC-7224
series 156 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
APPRO LC-7226
series 157 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
Apro Technology
H1000 series 255
V1.103G-
007 1 H.264
1 / 1
(VMD)
(V)
SMTP � Type 3 � Two-
Way admin -
Arecont AV1300 140 64327,
64328 1 JPEG
1 / 1
(VMD) - - - - - - -
Arecont AV1305 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV1310 140 65141,
65142 1 JPEG
1 / 1
(VMD) - - - - - - Tested by manufacturer.
Arecont AV1315 140 65191 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - - -
15 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
16 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
17 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
18 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
19 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
20 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
21 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
22 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
23 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
24 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
25 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
26 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
27 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
28 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
29 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
30 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
31 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
32 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
497 VA0.36 0 - 0 / 0 - - - - Out - Require a DLK like all
other devices.
33 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
34 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
35 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
36 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
37 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
38 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
39 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
40 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
41 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
42 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
43 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
44 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
45 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
46 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
47 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
48 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
49 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
50 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
51 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
52 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
53 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
54 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
55 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
56 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
57 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
58 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
59 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
60 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
61 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
62 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
63 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
64 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
65 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
66 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
67 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
68 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
69 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
465 - 1 JPEG 0 / 0 - - - - - - See remarks for further
information.
Mobotix D10 86
M10-
V2.0.2.21
V2.2.3.12
1 JPEG 0 / 0 - - - - - admin
Mobotix D12 86
MX-
V3.0.6.24,
MX-
V3.06.33,
MX-V3.0.8.7
MX-
V3.3.2.3,
MX-
V3.4.0.9,
MX-
V3.5.2.23
1 JPEG
MxPEG
1 / 1
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
MxPEG supported from
XPE 6.5a and firmware
3.3.2.3. Audio only
supported with MxPEG
Mobotix D22M 86
MX-
V3.3.0.19
MX-
V3.3.2.3,
MX-
V3.4.0.9,
MX-
V3.5.2.23
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
MxPEG supported from
XPE 6.5a and firmware
3.3.0.19. Audio only
supported with MxPEG
Mobotix D24 86
MX-
V4.0.1.15,
MX-
V4.0.2.33
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
Audio only supported
with MxPEG.
70 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
71 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
72 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
73 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
HCE481 series 24 2.00, 2.01 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM311 series 24
1.02, 1.08,
1.25, 1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM331 series 24
1.04, 1.10,
1.25, 1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM371A 24
1.05, 1.10,
1.25,1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM381 series 24
1.05, 1.10,
1.20, 1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only supported on
XPE 6.0a or higher.
74 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
75 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
76 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
77 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
78 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
79 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
80 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
81 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
82 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
83 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
84 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
85 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
86 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
87 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
88 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Output duration must be set to always on the devicepage to work correctly.
Tested by camera manufacturer.
Samsung SNP-
3370 396 1.20 1
JPEG
MPEG4
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Samsung SNP-
3370TH 396 1.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Samsung SNP-
3430H 402
1.07_11032
4 1
JPEG
MPEG4
H.264
0 / 0
(VMD) - � Type 2 - - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SNP-
3750 396
1.1.12,
1.20 1
JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Output duration must be
set to always on the
devicepage to work
correctly.
Samsung SNS-
100 192 2.4.1, 2.8.0 1
JPEG
MPEG4
1 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung SNS-
400 193 2.4.1, 2.8.0 4
JPEG
MPEG4
4 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung
SNT-1010 147 1.3, 2.1 1
JPEG
MPEG4 0 / 0 - � Type 2 - - root
The interlaced D1 and
VGA resolutions in
MPEG4 are supported
from XPE 6.5d.
89 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
90 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
91 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
92 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
93 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
94 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
95 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
96 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
97 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
98 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
99 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
100 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Sony SNC-M3W 102 1.10 1 JPEG 0 / 0 - � Type 1 - - admin
MPEG is not supported
on this device.
Sony SNC-P1 88
1.01, 1.03,
1.11, 1.22,
1.28
1 JPEG
MPEG4
1 / 1
(OD) Poll - - -
Two-
Way admin
Only I/O Output 1 can
be used. Output 2 is
only supported by the
Sony DF devices. Object
Detection (OD) events
only supported on XPE
6.0a or higher
Sony SNC-P5 98 1.00, 1.22,
1.28 1
JPEG
MPEG4
1 / 1
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
Sony SNC-RH124 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-RH164 352 1.02.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-RS44N 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-RS44P 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
101 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
102 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
103 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
104 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
105 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
106 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
107 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
108 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
109 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
110 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
111 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
112 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
series 326 1.3.1.42034 1 H.264 2 / 14 Poll - - - Out supervisor DVR support.
VideoIQ VIQ-
CT2xx series 326 1.3.1.42034 1 H.264 2 / 14 Poll - - - Out supervisor DVR support.
VideoIQ VIQ-E
series 355 1.3.3.43525 1 H.264
2 / 14
(V) Poll � - - Out supervisor DVR support.
Videology
20N758 184 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
Videology
21N758 184 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
Videology Server
Board 189 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
VideoTec Albert
VA01001 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Albert
VA01002 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Albert
VA02001 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Albert
VA02002 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
113 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
P, Pelco-D or Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
VideoTec Ulisse 463 3.12.13 1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Support for relative
positioning PTZ cameras
using Pelco-P, Pelco-D
or Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
114 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
VideoTec Ulisse IP
463 3.12.13 1 JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative
positioning PTZ cameras using Pelco-
P, Pelco-D or Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
115 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
VideoTec Ulisse Maxi IP
463 3.12.13 1 JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative
positioning PTZ cameras using Pelco-
P, Pelco-D or Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
Vivotek FD6100
series 109 0102b 1 MPEG4 0 / 0 - - - - - root -
Vivotek FD7130 366 0100d 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - root -
Vivotek FD7131 331 0100g 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
Vivotek FD7132 331 0200f 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
116 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
117 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
118 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
119 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
120 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
Support for the full Vivotek 31xx series & Vivotek 61xx series is implemented, but it has only been tested at Milestone with the devices listed above.
A special firmware for all Vivotek 7000 series is required for Two-Way Audio. The firmware can be acquired from Vivotek if needed.
Pre-alarms on Axis devices might need to be triggered twice for some events before being activated in XPE, XPP or XPB+. Please refer to Axis for
firmware to correct this.
If you are using any of the supported H.264 cameras, please contact Milestone Support to have the latest driver information for these cameras.
The DirectShow driver requires DirectX 9 or later to be installed on the machine. It can be used for local webcams as well as playback of local AVI-files.
To add the DirectShow ‘device’ you should specify 0.0.0.1 as the IP-address and “DirectShow” as the password. Only one instance of the DirectShow
‘device’ can be installed on a server. After installing it the webcam or file is setup in the Image Quality dialog. If you are going to enable a ‘Microphone’
and the corresponding camera has been configured with a webcam please ensure to first choose an audio source in the Image Quality dialog of the camera.
The USB Camera driver requires DirectX 9 or later to be installed on the machine. It can be used for local webcams. The USB driver can autodetect
local USB cameras, but if camera needs to be added manually you should specify 0.0.0.1 as the IP-address and a blank password. Only one instance of
the USB driver can be installed on a server and only one instance of the DirectShow driver and the USB Camera driver can be installed on a server.
Note that USB cameras use a lot of computer processing power because they deliver video in a much more raw data format than dedicated surveillance
cameras. Therefore, do not use more than a couple of USB cameras
The Universal Driver will be able to detect any device that responds to ARP request. For details on setting up a device using the Universal Driver follow
this link: http://www.milestonesys.com/support/technical+support/FAQ/FAQView?id=3365. The Universal Drivers is supported from XPE 6.5f, XPP 6.5b and XPB+ 6.5b.
The Screen Recorder driver is a driver to inconspicuously capture screen recordings of any Windows-based PC or point-of-sale terminal. Get further
information on the Screen Recorder by following this link: http://www.milestonesys.com/products/value_add_products/screen+recorder.
If an IQEye 7xx, 8xx or Alliance camera has it firmware updated to 3.0/9 or newer it will no longer work with the old IQEye driver. To get it to work you
will have to use the Replace Hardware Device wizard to change the driver to the new IQEye Cameo driver.
1 Address ID for PTZ Multi-drop must be set to the same value as the camera number on the Video Server.
2 If the desired frame rate does not work as defined in the administrator image settings. Open a Web page; enter the IP address of the Sony V704 and
browse to the following location: Administrator� Settings� Video� Video Channel� Frame rate. Set the Frame Rate to “Fastest”. Note that the
maximum frame rate available in JPEG mode is 12fps.
3 If events are used on the HikVision DS6101 and DS6104 remember to setup an Event schedule on the device since this cannot be done through the
driver.
121 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
4 Inputs and rules needs to be enabled and setup on the device since this cannot be done through the driver.
5 For PTZ control to work with the Honeywell ACUIXIP the DIP switches on the device must be configured to either software controlled PTZ configuration (Switch 5-8 OFF, recommended) or to Pelco-D.
6 For the Axis Q740x devices the first half of the physical I/O ports are designated for Inputs and the second half for Output. The driver is setting this
up automatically for each port.
I/O Input • Default FTP port: 21
• Default SMTP port: 25
• Default Alert port: 1234
Notes to I/O Channels Column
(A) • Indicates that Audio Events are supported on the device.
(An)
• Indicates that device built-in Analytics Events are supported.
(B) • Indicates that Boot Events (Power lost) are supported on the device.
(C) • Indicates that Crossline detection Events are supported on the device.
(OD)
• Indicates that Object Detection Events are supported on the device. OD is only supported on XPE 6.0a or higher.
(P) • Indicates that pre-alarm is supported on the device.
(S) • Indicates that Shielding Events are supported on the device. (Ta) • Indicates that Tampering Events are supported on the device.
(Te) • Indicates that Temperature Events are supported on the device.
(Tr) • Indicates that Tripwire Events are supported on the device.
(V) • Indicates that Video Loss/Video Resumed Events are supported on the device.
122 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
(Va) • Indicates that Voice Alerts Outputs are supported on the device. Voice Alerts works as Outputs and can be triggered by Events.
(VMD) • Indicates that Camera Video Motion Events are supported on the device.
Notes to PTZ Presets Column
Type 1 • Pan/Tilt/Zoom (PTZ) Preset Positions can be defined in the software; this requires the PTZ camera to be of the so-called "absolute positioning" kind (as
opposed to "relative Positioning"). If the PTZ camera is not of the absolute positioning kind the PTZ Preset Positions will NOT be available. Please
consult the video server manufacturer for more Information.
Type 2
• Pan/Tilt/Zoom (PTZ) Preset Positions can be defined using the built-in web-page in the video server controlling the PTZ Camera or in the PTZ Camera
itself, if it is a network PTZ Camera. The software can utilize these PTZ Preset Positions. In this way PTZ Preset Positions may also be supported for PTZ
cameras of the "relative positioning" kind. Please consult the video server manufacturer for more information.
Type 3
� Pan/Tilt/Zoom (PTZ) Preset Positions can be defined in the software and stored in the PTZ camera. There are a limited number of preset positions available. This way PTZ cameras of the "relative positioning" kind is supported in a more flexible way than with type 2.
Type 3 is only supported on XPE 6.0a or higher, XPP 6.0a or higher and XPB+ 6.0a and higher.
Type 1 & 2 or 1 & 3 • For this video server the software supports both ways of handling PTZ Preset Positions.
Supported transparent PTZ protocols
• Bosch Dome
• Bosch Dome G4
• Discrete 2300
• Dynacolor Absolute
• Dynacolor Relative
• JCBP-S
• Infinova I
• Panasonic CS850
• Pelco-D
123 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
It is recommended to backup the configuration file SurvPro2.ini located in the surveillance folder (e. g. C:\Program Files\Milestone\Milestone Surveillance or for
XPE 7.0a and newer in C:\ProgramData\Milestone\Milestone Surveillance) before installing the device pack.
Device Pack changes Changes from Device Pack 5.5 to 5.6
• Added support for new devices and firmware. See the above table.
• Added support for AUX commands on 360 Vision IP Dome.
• Added support for I/O on Sony SNC-CH120.
• Added support for I/O on Pelco Sarix series, Pelco Spectra and Pelco Spectra TBX.
• Added support for Video Resumed event on Axis Q74xx devices.
• Added support for Joystick on the Panasonic BB-HCM5xx devices.
• Added support for Crossline detection on Axis P3343.
• Added support for IPV6, Interlaced field-encoded H.264 and AUX commands in the ONVIF Conformant drivers.
• Improved PTZ handling in the ONVIF Conformant drivers.
• Fixed an issue for Axis M, P and Q devices where rotating an image could cause the images to be black and white.
• Fixed an issue for Axis M, P and Q devices where in certain scenarios an event would no longer work if the name had been changed.
• Fixed an issue where higher resolutions in H.264 did not work for the Arecont AV10005.
• Fixed an issee for Pixord 4xx devices where you might not get images when using XProtect Enterprise 7.0a or newer, XProtect Professional 7.0a or
newer, XProtect Essential or XProtect Go.
Changes from Device Pack 5.4 to 5.5
• Added support for new devices and firmware. See the above table.
• Added PTZ support for Infinova V2500-M Series.
• Added support for Two-Way Audio for IQEye IQD3xx, IQM3xx and IQA3xx devices.
• Fixed an issue for IQEye 732 where the resolution that allowed analog monitoring mode was missing. • Fixed an issue where the Milestone XProtect® Screen Recorder could be added with wrong IP, Port and Username.
124 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added support for new devices and firmware. See the above table.
• Added support for multiple Audio channels for Bosch VIP X2, VIP X20, VIP X40 and VIP X1600.
• Changed the available PTZ Presets for Agilemesh 100 up to 50 presets.
• Changed the available PTZ Presets for Pelco Spectra mini up to 68 presets.
• Changed the available PTZ Presets for Pelco Spectra IV IP, Spectra IV H.264 and Spectra HD up to 255 presets.
• Arecont Vision drivers now use the HTTP interface instead of the SDK interface.
• Sanyo HD2100, HD2300, HD2500, HD3100, HD3300, HD3500, HD4600, HD5400 and HD5600 have been moved to newest Sanyo framework.
• Fixed an issue for Hunt HWS-04HDW, HLT-87Z and HVT-01HT where adding them without the "<default>" username could cause the Live stream to
fail.
• Fixed an issue for D-Link DCS-3220 where it could not be added due to old WinInet functionality.
• Fixed an issue for ONVIF Conformant Device driver where Management Application could crash when previewing.
• Fixed an issue where Vivotek IP7361 could not be autodetected when using Express mode.
Changes from Device Pack 5.2 to 5.3
• Added support for new devices and firmware. See the above table.
• Added support for PTZ, I/O and Audio on PSIA Conformant Devices.
• Added support for PTZ Type 1 and 3, I/O, VMD and Tampering Events on ONVIF Conformant Devices.
• Added support for Two-Way Audio on JVC VN-V225U and VN-X235U.
• Fixed an issue where Axis P3343 and Axis P3344 was detected on the Axis AreaView driver.
• Fixed an issue for all Dynacolor series where a wrong DNS server entry on device resulted in video stream disconnecting every 1-2 seconds.
• Fixed an issue for UPD IPC and UDP NVE devices where after a while the video stream could disconnect.
• Fixed an issue for JVC VN-C205 where running in below 1 FPS could cause memory leak.
• Fixed an issue for Bosch VideoJet X20 where the wrong Hardware ID was used during detection.
• Fixed an issue for Bosch VIPX1 where PTZ patrolling could stop working when device was rebooted during patrolling.
Changes from Device Pack 5.1 to 5.2
• Added support for new devices and firmware. See the above table.
• Added One-Way Audio support for Pelco Sarix devices.
• Added Output support for Pelco NET5301T, NET5308, NET5316, Spectra IP IV and Spectra Mini IP IV.
• Added Cameo functionality for IQEye 8xx Sentinel and Alliance series.
• Added support for ONVIF version 1.02.
• Added support for Bosch VMD and Input events in the ONVIF driver.
• Fixed an issue in the ONVIF driver where PTZ and JPEG might fail.
125 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue for Toshiba IK-WB11A where Recording Server could hang during restart.
• Fixed an issue where the DirectShow driver could respond with a Parameter incorrect error.
• Fixed an issue for Verint S17xx devices where AUX commands did not work.
• Fixed an issue for Infinova V1749 with Brightness, Saturation, Contrast and Hue.
• Fixed an issue where Bosch NWD455 (Flexidome) devices was detected with the ONVIF Conformant driver instead of the Bosch Dinion/Flexidome
driver.
• Fixed an issue for Sony SNT-EX101 devices where Audio was not enabled.
Changes from Device Pack 5.0 to 5.1
• Added support for new devices and firmware. See the above table.
• Added support for RTSP over HTTP protocol for Axis M, P and Q series devices.
• Added support for Axis PT motor YP3040 for Axis Q1755 and Q1910.
• Added support for Two-Way Audio for Axis P3344, JVC VN-V26 and JVC VN-X35.
• Added support for direct JPEG streaming in the USB and DirectShow driver.
• Fixed an issue for JVC VN-C20 where it was not possible to get a Preview Image stream in the Management Application.
• Fixed an issue for Axis M, P and Q series devices where you might get an Integer error when opening the Video Properties.
• Fixed an issue for Sanyo VCC-HD4600, HD5400 and HD5600 where PTZ functionality reacted slowly.
• Fixed an issue for IQ Eye IQD3x where the resolution always got set to 1280x720.
• Fixed an issue for Arecont AV3130 where default quality settings resulted in not getting a stable stream.
• Fixed an issue where it was not always possible to add Pelco Sarix IE series devices.
• Fixed an issue where Sony SNC-P1, SNC-CS10, SNC-CS11, SNC-DF40 and SNC-DF70 devices could periodically ask for a JPEG stream when MPEG4
stream was selected. This was seen on overloaded networks or networks with bad connections.
Changes from Device Pack 4.9 to 5.0
• Added support for new devices and firmware. See the above table.
• Added support for Input and Tampering events for Honeywell HD3MDIP and HD3MDIPX.
• Added Two-Way Audio and I/O for Mobotix devices.
• Fixed an issue for IQEye devices where if Audio was not enabled on the device webpage it could cause disconnections in the Video Stream.
• Fixed an issue where if the CPU was loaded at 90-100% the Johnson Controls could cause the Recording Server to crash.
• Fixed an issue where all events disappeared in XProtect Enterprise 7.0 when the first event was selceted for the following device:
o Sony SNC-P1, SNC-CS1x, SNC-DF40, SNC-DF70, SNC-DS20, SNC-DS60, SNC-CS20, SNC-CM120, SNC-DM110 and SNC-DM160
o Etrovision EV3130 and EV6230
o All Eyeview devices.
126 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added support for new devices and firmware. See the above table.
• Added DVR support for Johnson Controls devices.
• Added support for I/O and PTZ on Johnson Controls devices.
• Added DVR support for VideoIQ VIQ devices.
• Added support for Crossline detection events for Axis P3301.
• Fixed an issue on the Axis M, P and Q series devices where time stamps on Pre-alarm images did not match system time.
• Fixed an issue on the Axis M, P and Q series devices where if RTSP was set to another port than 554, no video was received.
• Fixed an issue where the DirectShow camera driver could not stream images in the XPE 7.0 Management Application and Recording Server at the same
time.
• Fixed an issue on the Barix Barionet where if 2 Inputs where active at the same time they interfered with each other.
• Fixed an issue with PTZ on ACTi that could cause loss of PTZ functionality after some time or crash of Recording Server in extreme cases.
• Fixed an issue on HikVision DS6104 where Microphone in some situations did not work.
• Fixed an issue on Sony SNC-Rx series cameras where H.264 failed on wireless networks.
Changes from Device Pack 4.7 to 4.8
• Added support for new devices and firmware. See the above table.
• Added support for new Keep-alive sockets in Universal and Universal 16-channel drivers.
• Added support for H.264 for Bosch devices running firmware 4.0 or newer.
• Added support for new I/O API for Bosch devices running firmware 4.0 or newer.
• Added support for H.264 for Optelecom Siqura C-60.
• Added support for H.264 for Panasonic BB-HCM700 series.
• Fixed and issue in the RTP and RTSP protocol that could cause the Recording Server to hang. Affected devices are:
o 360 IP Vision Dome
o Apro Technology H1000 series
o Cisco IPC series
o Darim Vision PVE400
o HikVision DS-2CD7x2 and DS-2CD8x2 devices
o HikVision DS-6101 and DS-6104 devices
o HikVision DS-2DF devices
o Honeywell ACUIX IP devices
o Honeywell HCx554 devices
o Panasonic WV-Nx502 devices
o Pelco ID series
127 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue where MPEG4 did not work for Panasonic WJ-NT304.
• Fixed an issue for Hunt HLV-1CAD where H.264 could fail when Variable bitrate was selected.
• Fixed an issue with PTZ for Vivotek VS7100.
• Fixed an issue for Verint S17xx that could cause the CPU to reach 100% usage when using XPE 7.0.
• Fixed an issue where HikVision DS-2CD7x2, DS-2CD8x2, Basler BIP series and Sanyo HD4000 could not autodetect when an invalid DNS server was
specified on the XPE server.
• Fixed an issue where PTZ did not work for and PTZ Presets could not be retrieved ACTi ACM-8201.
• Fixed an issue for HikVision DS-2CD7x2 and DS-2CD8x2 frequently created a "Failed to provide Image" error.
• Fixed an issue where the incorrect FPS was set for the Vivotek IP7161.
• Fixed an issue for Axis P5534 where PTZ commands was reversed when rotation was set to 180.
Changes from Device Pack 4.6 to 4.7
• Added support for new devices and firmware. See the above table.
• Added support for JPEG, I/O, VMD Events and Two-way Audio for ACTi devices running Streaming mode V2.0.
• Added support for multiple Microphones and Speakers on ACTi devices with multiple Audio In and Audio Out.
• Fixed and issue in the RTP and RTSP protocol that could cause the Recording Server to hang. Affected devices are:
o Axis M series
o Axis P series
o Axis Q series
o Sony EP series
o Sony EX series
o Sony Rx devices
o Toshiba Teli CI8x10 devices
o The new Vivotek 7000 drivers.
• Added support for the new Bosch I/O API from Firmware 4.0.
• Added support for more Inputs and Outputs on the Barix Barionet when chaining devices.
• Added TCP support for Panasonic WV-NF302, WV-NP304, WV-NS950, WV-NS954, WV-NW960 and WV-NW964.
• Added H.264, Absolute PTZ and PTZ Preset Type 3 functionality to ONVIF driver.
• Added Digest authentication for PSIA driver.
• Fixed an issue where the Recording Server could crash when daisy chaining analog PTZ devices to one COM port on a Multi-channel Video Server.
• Fixed an issue in the Universal Driver where if a MPEG4 stream did not contain a value in a=fmtp line the RTP module couldn’t start a stream.
128 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue for Sony SNC-RZ50 where speed support was missing for PTZ controls with Joystick.
• Fixed an issue for Sony SNT-EP154 and SNT-EX154 where a global lock could cause connections times up to ten minutes.
• Fixed an issue where the Vivotek PZ7112 could not be added.
• Fixed an issue where Bit rate could not be set on single channel Arecont Vision cameras.
• Fixed an issue where Downsample Factor could not be set on Arecont Vision cameras.
Changes from Device Pack 4.5 to 4.6
• Added support for new devices and firmware. See the above table.
• Arecont Vision drivers now use the Arecont Vision SDK interface instead of the HTTP interface.
• Added support for authentication for the Basler BIP series, which is available on newer firmwares.
• Added Audio support for the Etrovision EV3131A.
• Added I/O support for Arecont Vision devices.
• Added support for H.264 on the Arecont Vision AV8185 and AV8365.
• Fixed an issue in H.264 for Sanyo VCC-HD4000.
• Fixed an issue in the RTP component for the Universal drivers.
• Fixed an issue where a Basler BIP device could crash the Administrator during autodetect or manual detect.
• Fixed an issue for VideoIQ VIQ where H.264 FPS could be unstable when running at 30 FPS.
• Fixed an issue where Dynacolor Diva devices could get a lot of connection errors when using MPEG4 and H.264 codecs.
• Fixed an issue where some Panasonic devices could have issues if using other than default admin user.
• Fixed an issue with HikVision DS-6101 where if Administrator was opened while Recording Server is running the Administrator could hang when closed.
• Fixed an issue where the network queue size was increased for the Toshiba Teli CI8x10D devices.
• Fixed an issue where the Recording Server might hang when devices stopped responding while using RTP or RTSP protocol.
Changes from Device Pack 4.4 to 4.5
• Added support for new devices and firmware. See the above table.
• Added support for transparent PTZ protocol on Optelecom devices. Presets type has changed to Type 3 and Joystick is now supported on C-50 and S-
50. • Added Audio Out support on Panasonic WJ-NT304, WV-NF302, WV-NP304, WV-NS950, WV-NS954, WV-NS960 and WV-NS964.
• Added Audio Out support on Samsung Techwin SNC-550, SNC-570, SND-460V, SND-560, SNP-1000(A), SNP-3300(A), SNS-100 and SNS-400.
• Changed detection scheme for Pelco devices so UPnP is only used if known IP is no longer valid.
• Joystick support improved for all Canon VB-C devices.
• Fixed an issue where IQEye 7 series and 8 series displayed H.264 codec on newer firmwares although not supported.
• Fixed an issue where IQEye cameras could lose connection at low FPS in either live or recording.
• Fixed an issue with Day/Night settings for Sony SNC-C20.
129 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue on Johnson Controls DVN5008 where connection could be lost if the corresponding audio channel was enabled in XPE but disabled on the
device.
Changes from Device Pack 4.3 to 4.4
• Added support for new devices and firmware. See the above table.
• Added PTZ support for Vivotek IP2121, IP2122 and VS2101.
• Added support for Bosch Autodome and Panasonic C850 PTZ Protocols on the VCS VIP 10.
• Changed Axis 214, 215, 216, 221, 223, 225, 231, 232, 233, 24xQ and 24xSx series drivers to no longer include WinInet functionality. WinInet could
cause problems with detection on some systems.
• Fixed an issue with PTZ speed when using Coaxitron and Extended Coaxitron on the Pelco NET5308 and NET5316.
• Fixed an issue for ACTi and ACTi OEM’s where the device would not go to the same preset twice in a row.
• Fixed an issue where resolutions were not always set on the Appro LC-7226.
• Fixed an issue for Stardot Netcam SC where sometimes the Image Quality dialog did not open.
• Fixed an issue for Basler BIP drivers where Output pulse length could not be controlled.
Changes from Device Pack 4.2 to 4.3
• Added support for new devices and firmware. See the above table.
• Added streaming mode TCP tunneled for all Arecont AVxxx5 cameras.
• Added H.264 support for all Basler devices.
• Added MPEG4 support for the Canon VB-C60 device.
• Added I/O and VMD support for Panasonic WJ-NT304, WV-NF302, WV-NP304, WV-NS95x and WV-NS96x devices.
• Added MPEG4 support for Samsung Techwin SND570 and SNC560.
• Changed Axis 209, 212 and 213 series drivers to no longer include WinInet functionality. WinInet could cause problems with detection on some
systems.
• Fixed an issue where Date and Time was not set on the Axis 212 when set in the Administrator.
• Fixed an issue where some MPEG4 settings were not disabled when JPEG was selected for Axis 209, 212 and 214.
• Fixed an issue with a memory leak on the Optelecom Siqura C-50.
• Fixed an issue where the Axis 2401 always showed 1Kb as image size.
• Fixed an issue where “Enable fisheye” were no longer automatically set when adding an iPIX device.
• Fixed an issue where Sony SNC-5xx devices could periodically ask for a JPEG stream when MPEG4 stream was selected. This was seen on overloaded
networks or networks with bad connections.
• Fixed an issue where events could be “inverted” on IQEye cameras if Recording Server was restarted while events were active.
Changes from Device Pack 4.1 to 4.2 • Added support for new devices and firmware. See the above table.
130 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added I/O and VMD support for Bosch Dinion devices and VMD support for Bosch Flexidome devices.
• Added Audio support for JVC VN-V685 and VN-V686B.
• Added H.264 support for IQEye Alliance series cameras.
• Changed IQEye driver to no longer include WinInet functionality. WinInet could cause problems with detection on some systems.
• Changed Axis 206, 207, 210, 211 and 282+ series drivers to no longer include WinInet functionality. WinInet could cause problems with detection on
some systems.
• Fixed an issue where Samsung SNC-B5395 in rare cases could crash Recording Server.
• Fixed an issue where some Panasonic might experience timeouts when doing PTZ at low bitrates.
• Fixed an issue with incorrect FPS on Sony SNT-V704.
• Fixed an issue where IQEye cameras with lower case ‘iq’ model names are also detected.
• Fixed an issue where a system might have problems running more than one Basler BIP device.
• Fixed an issue where Input 2 did not work on Axis Q7401.
Changes from Device Pack 4.0 to 4.1
• Added support for new devices and firmware. See the above table.
• Added support for Two-way Audio on Canon devices.
• Added support for H.264 on the Sony SNC-RZ50.
• Fixed an issue in the RTSP module which could cause stuttering in the Audio and Video streams.
• Fixed an issue where Input 2 did not work for Canon VB-C50.
• Fixed an issue where some Axis devices could not change resolutions.
• Fixed an issue with cropped images on Arecont devices.
• Fixed an issue where the Axis 214 and 215 could get an Out of memory error in the Administrator when running MPEG.
Changes from Device Pack 3.9 to 4.0
• Added support for new devices and firmware. See the above table.
• Added support for PTZ scanning on Axis devices.
• Added support for the username:password format on Axis devices.
• Added support for One-Way and Two-Way Audio on Bosch devices.
• Added TCP support for Arecont H.264 devices.
• Changed to UDP and TCP Unicast instead of Multicast on Verint S1704, S1708, S1712 and S1724.
• Fixed an issue where the resolution value for IQEye device was not reset to minimum value if the entered value was lower.
• Fixed some issues with PTZ for Canon VB-C50 and VB-C300.
Changes from Device Pack 3.8 to 3.9 • Added support for new devices and firmware. See the above table.
131 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added support for H.264 for Sanyo VCC-9x00, VCC-HD4000, VCC-XZ600, VCC-XZN600, VCC-ZMN600 and VCC-ZM600 (H.264 only supported in XPE
6.5d and newer).
• Added TCP support for the Axis P3301.
• Changed to UDP and TCP Unicast instead of Multicast on Verint S1700, S19x0, S26x0 and S2700.
• Fixed some issues with PTZ for the Samsung Techwin SNS400 and Samsung Techwin SNS100.
• Fixed an issue where not all MPEG FPS was supported for the Samsung Techwin SNS100.
• Fixed an issue where Japanese versions of some Panasonic devices were not detected.
• Fixed an issue where the installer could ask to convert PTZ presets if the older device pack was uninstalled first.
Changes from Device Pack 3.7 to 3.8
• Added support for new devices and firmware. See the above table.
• Added support for H.264 for Axis P3301 and some Arecont devices (H.264 only supported in XPE 6.5d and newer).
• Added audio support for VCS VideoJet10, VCS Vip10 and Pelco NET350.
• Added new smoother PTZ joystick functionality for most Axis, All Bosch, All VCS, and the Pelco NET350 devices.
• Added support for Sony’s new fast PTZ on SNC-RX5x0 devices and the smoother PTZ functionality. (The Sony RX5x0 demands firmware 2.30 or 3.00
and Sony’s new PTZ hardware.)
• Added support for UDP streaming for VCS VideoJet10, VCS Vip10, Pelco Net300 and Pelco Net350.
• Fixed an issue where the Axis PTZ Control Queue was not disabled on some devices causing PTZ to not work.
• Fixed an issue where getting a Preview Image from an unconnected JVC VN-V25 or VN-V26 could cause infinite wait.
• Fixed an issue where Mobotix devices running in Japanese language mode could not be connected.
• Fixed an issue where the Toshiba Teli EJ7000 was set as MPEG4 mode even though running in JPEG mode.
• Fixed an issue where Audio Out could be delayed on the Panasonic WV-NS202.
• Fixed an issue with PTZ for Axis 215.
• Fixed an issue with speaker being shown for Axis 207W device although not supported.
• Fixed an issue in core components that could cause crashes in special circumstances.
• Fixed an issue where Focus Near Start and Focus Stop had switched functionality on devices using transparent Pelco-D protocol.
• Fixed an issue for Sony SNC-CS10, SNC-CS11, SNC-DF40, SNC-DF70 and SNC-P1 where it was not always possible to change to MPEG4.
• Fixed an issue where in some circumstances the wrong drivers were installed in the wrong directory if both XPE and XPCO are installed on the server.
Changes from Device Pack 3.6b to 3.7
• Added support for new devices and firmware. See the above table.
• Added support for Image Flip option on Toshiba IK-WB15A and IK-WB21A.
• Fixed an issue where the JVC VN-V686 could move beyond 90 degrees when using Click-to-Center. This should only be possible when using Joystick or
PTZ buttons.
• Fixed an issue where Microphone (Audio In) was missing for the Sony SNT-V704.
• Fixed an issue with image delay at low FPS on the Vivotek 21xx devices.
132 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue where the FPS was not set correctly for Vivotek VS2403.
• Fixed an issue where PTZ movement with Joystick was the same at all zoom levels for the Canon VB-C300.
• Fixed an issue where channel 2 on the Panasonic WJ-TN304 only showed 1 FPS regardless of setting.
Changes from Device Pack 3.6 to 3.6b
• Fixed an issue where FPS was set to 25 for all Axis devices running MPEG in existing configuration.
• This fault only exists on Device Pack version 3.6 – older Device Pack versions do not have this problem.
Changes from Device Pack 3.5 to 3.6 • Added support for new devices and firmware. See the above table.
• Added support for cropping for Arecont devices.
• Added Two-way Audio support for Axis 213 instead of One-way Aduio.
• Fixed an issue where wrong bitrate selection was shown for ACTi ACM-4200 and ACM-5600 series.
• Fixed an issue where Panasonic BB-HCM5xx cameras could become unstable at 1 FPS with some resolutions.
• Fixed an issue where some Sony and Axis devices could leak memory during PTZ operation.
Changes from Device Pack 3.4 to 3.5 • Added support for new devices and firmware. See the above table.
• Added PTZ support for Panasonic WV-NT304.
• Added One-Way Audio, Motion event and I/O support for Canon VB-C50 and VB-C300 cameras.
• Added specific resolutions support for all ACTi devices.
• Added Click-to-center support for the JVC VN-V686.
• Added rotation capability for Axis 216FD/MFD.
• Added support for username and password with the newer firmware for Arecont devices.
• Fixed an issue where Speaker (Audio Out) could be missing for Axis 207, 210 or 211 devices.
• Fixed an issue where if a device is already added to the system, new audio abilities were not listed.
• Fixed an issue where adding I/O on multiple JVC VN-25/V26 cameras resulted in only I/O on the first camera was working properly.
• Fixed an issue with JVC VN-C625/C655 where after a camera reboot I/O stopped working.
• Fixed some issues with PTZ and PTZ Presets for the JVC VN-V686.
Changes from Device Pack 3.3 to 3.4 • Added support for new devices and firmware. See the above table.
• Added support for Axis Special events Audio alerts, Boot, Temperature, Tampering and Video Loss. See the above table.
133 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added help for White Balance objects for the JVC VN-V25 and VN-V26.
• Added Image rotation for the AgileMesh-100.
• Added UDP support for Bosch VIP X devices, Bosch VG4, Bosch Dinion and Bosch Flexidome.
• Fixed an issue where PTZ did not work on Bosch VG4 series.
• Fixed an issue where Sony SNC-RZ25 did not zoom correctly.
• Fixed an issue where FPS on AgileMesh-100 was not always correct.
• Fixed an issue where the Toshiba Teli EJ7000 could possibly crash.
• Fixed an issue with zoom via joystick on the Sony SNC-RZ25.
• Fixed an issue where the Panasonic WV-NS202 had problems reconnecting after having lost connection.
• Fixed an issue where Input 9-12 did not work on the ADAM 6050
Changes from Device Pack 3.2 to 3.3
• Added support for new devices and firmware. See the above table.
• Added support for two-way Audio on some Axis and Sony devices. See the above table. (Two-way Audio only supported from XPE 6.5 and up).
• Added support for MxPEG with Audio for some Mobotix devices. See the above table.
• Added support for RTSP Authentication on Digimerge DNS1010.
• Fixed an issue with PTZ not working correctly on Digimerge DNS1010.
• Fixed an issue where PTZ did not work on Bosch VG4 Series.
• Fixed an issue where Area zoom did not work for Sony SNC-RZ25, SNC-RZ50 and SNC-RX550.
• Fixed an issue with JVC VN-C625 where you could run out of alarms when restarting the Recording Server.
• Fixed an issue with Pelco Camclosure IP110 where you could not get live images when running XPE as a service.
• Fixed an issue where Audio stopped after 2 minutes on the Panasonic NP244/NP1000 series.
• Fixed an issue with ACTi 2310Q and 2320Q where Audio was missing.
• Fixed an issue with Mobotix D12 and M12 where brightness was not set on the left camera.
Changes from Device Pack 3.1 to 3.2
• Added support for new devices and firmware. See the above table.
• Fixed an issue with resolutions on the Vivotek 3xxx series.
• Fixed an issue with importing presets with + sign on Axis devices.
• Fixed an issue where PTZ presets for the Panasonic NS202 did not always work in the Smart Client.
• Fixed an issue with joystick control on Sony SNC-RZ25.
• Fixed an issue where no live images were shown if running a different port than 80 on APPRO devices.
• Fixed an issue where the Sony SNC-P5 sometimes missed the PTZ Preset Positions button in Settings dialog.
• Fixed an issue where patrolling with Sony or Axis devices would make the drivers run out of ports and then disable all PTZ functionality for the devices.
• Fixed an issue for Sony SNC-RZ50 and SNC-RX550 where click-to-center was not accurate.
• Fixed an issue where Axis 2400/2401 kept losing connection when Audio was enabled.
134 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue where audio was distorted when using Axis 2400/2401 and 2491 Audio Module.
• Fixed an issue where it was possible to set scan speed on patrolling on an Axis 233D which caused patrolling to fail.
• Fixed an issue where Sony SNC-DF50 did not deliver correct FPS in MPEG mode.
• Fixed an issue where JVC VN-C655 could not be used through a router/NAT.
• Fixed an issue for IQEye devices where the shown FPS sometimes was lower than the requested FPS.
• Fixed an issue with connecting to an ADAM 6060 from multiple Smart Clients.
• Fixed an issue with not getting images from Panasonic BB-HCM500 series when the devices was added with username:password option.
Changes from Device Pack 3.0 to 3.1 • Added support for new devices and firmware. See the above table.
• Added Audio support for ACTi devices. Only one Audio channel supported per device.
• Added support for RTSP Authentication for Vivotek 71xx devices.
• Fixed an issue with Dynacolor absolute protocol on ACTi devices where PTZ always rotated right when panning.
• Fixed an issue with Dynacolor absolute protocol on ACTi devices where PTZ presets would not be defined.
• Fixed an issue with Bosch and VCS devises where camera could not be added if the Live account had a password.
• Fixed an issue for IQEye cameras where it was possible to set an unsupported downsample factor which resulted in not getting images.
• Fixed an issue for Sony SNC-RZ50 where you could only select JPEG FPS from dropdown box.
• Fixed an issue for Sony SNC-RZ50 where scanning speed was always the same when patrolling.
• Fixed an issue where Recording Server could not startup if driver dll were missing.
• Fixed an issue with Bosch devices where device could not be added when Live account had password.
• Fixed an issue with Arecont AV3130 where Image quality was reset to low when high was selected.
• Fixed an issue with IQEye devices where setting an unsupported downsample factor resulted in Image failure.
• Fixed an issue where change of polling interval did not work for Sony SNC-RZ30.
• Fixed an issue with Axis 241S where Bosch dome camera could not be focused using joystick.
• Fixed an issue where Bosch VG4 Dome was not setup as PTZ camera by default.
• Fixed an issue with Axis 212 where PTZ presets could not be imported.
• Fixed an issue where the ACTi SED-2600 device could cause the Recording Server to crash.
• Fixed an issue where the zoom slider did not work for Panasonic NS202.
Changes from Device Pack 2.9 to 3.0 • Added support for new devices and firmware. See the above table.
• Added support for absolute PTZ positioning through the Dynacolor absolute protocol for ACTi devices.
• Included a conversion tool for Axis absolute PTZ preset position values. Please see the upgrade note above.
• Fixed an issue with several Vivotek 71xx cameras not being able to be viewed at the same time.
• Fixed an issue with Arecont AV3130 where image settings set to ‘high’ switched to ‘low’.
• Fixed an issue where more FPS than requested was recorded for IQEye cameras.
135 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue with TCP streaming for the Samsung SNT-1010.
• Fixed an issue with PTZ Preset positions on dev. pack 2.9 for the Sony RZ25.
• Fixed an issue for the Axis 241Q, where only 1 COM port could be configured.
• Fixed an issue for Axis 2400 and 2401, freezing the administrator when entering the PTZ Preset dialog.
• Fixed an issue for Panasonic 202, where the PTZ Zoom scale was not working on dev. pack 2.9
• Fixed an issue for Panasonic 240 and 244, where images could not be retrieved when audio was enabled on cameras with firmware 1.23 installed.
• Fixed an issue on Canon VB-C50i with frames being skipped
Changes from Device Pack 2.8 to 2.9 • Added support for new devices and firmware. See the above table. • Added support for installing device packs in root directory. • Improved joystick PTZ functionality with XProtect 6.0d and SmartClient 3.0d for AXIS devices that support PTZ with joystick, Sony RX550 and
Panasonic NS202.
• Fixed an issue where only one Sanyo DP9585 camera at a time could receive images. • Fixed an issue with PTZ presets on a Bosch VIP X1 with a Bosch dome. • Fixed an issue where only 8 presets from Panasonic BB-HCM cameras were imported. • Fixed an issue with Axis MPEG4 and running with a port different from 80.
Changes from Device Pack 2.7 to 2.8 � Added support for new devices and firmware. See the above table.
� Added support for 4CIF/D1 interlaced resolutions for Bosch devices. This works from XPE 6.0b and up.
� Added support for TCP 2.0 for the ACTi 23x0Q series.
� Fixed an issue with the Axis 2191 sound module not supported in XPE 6.0 for AXIS 2100, 2110, 2120, 2400/2400+, 2401/2401+.
� Fixed an issue with not being able to detect Pixord 400/1401, when users were defined on the device.
� Fixed an issue on JVC VN-E4, with problems updating the camera settings correct for channels 2, 3 and 4.
� Fixed an issue with the Sony RZ30/2, with not being able to retrieve images..
� Fixed an issue with the Sony RZ30/2 and RZ20 not working in Monitor when User Access Right set to level 1.
� Fixed an issue with the Panasonic NP-244, with not being able to receive images.
� Fixed an issue with not being able to detect Axis 231D+.
� Fixed an issue with not being able to detect Lumenera cameras if users had edited the ‘description’ property in the camera API.
� Fixed an issue with missing audio on Axis 241QA.
� Fixed an issue with Axis, Panasonic and Sony devices where Audio was not enabled on webpage when enabled in XPE.
� Fixed an issue with the Hue slider for the Verint S1700, S19xx and S2700 video servers.
Changes from Device Pack 2.6 to 2.7
136 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added support for new devices and firmware. See the above table.
• Added Audio support for Panasonic BB and BL series.
• Added Support for Object Detection (OD) events on Sony devices.
• Added support for MPEG and VMD on the Panasonic NP series.
• Fixed an issue with audio not supported for Axis 212PTZ.
• Fixed an issue with Monitor reload problem for Samsung SCC-C6475.
• Fixed an issue with wrong FPS in MPEG4 for Sony RX550.
• Fixed an issue with getting same picture on all channels when running 1 FPS on Vivotek 2402.
• Fixed an issue with PTZ not working on Axis 214 if “PTZ Control Queue” set on camera webpage.
• Fixed an issue with text overlay getting appended on Vivotek 2402.
• Fixed an issue where it was impossible to add Axis 2100, Axis 2120, Axis 2401 OSYS and Sony V304 when running IE7.
• Pre-alarm post images are not supported.
Changes from Device Pack 2.5 to 2.6 • Added support for new devices and firmware. See the above table.
• Fixed an issue where GoTo Event on an AXIS PTZ that does not respond caused the Monitor to crash.
• Fixed an issue where changing from MPEG to MJPEG on an AXIS 241Q caused the Monitor to crash.
Changes from Device Pack 2.4 to 2.5 • Added support for new devices and firmware. See the above table.
• Added audio support for the AXIS 214 camera.
• Added support for optical (1x, 1.5x, 2x, 2.5x) and digital (3x) zoom functionality on the Panasonic NP240/244.
• Added support for PAL and help on the Sony SNC-CS50.
• Added support for I/O events on the Sony V704.
• Fixed an issue where AXIS devices would loose connection on speed up on motion.
• Fixed an issue where some AXIS and Sony Devices could leak handles during multiple disconnect/reconnections.
• Fixed an issue where the image stream on the Mobotix M10M stalled for 2-3 seconds at short intervals.
• Fixed an issue where the PTZ home button on the Sony R25 did not return to the correct value.
• Fixed an issue where the Panasonic NP244 could not be auto detected.
• Fixed an issue on the WebEye E10 where there was a buffer delay when the frame rate was below 5FPS.
Changes from Device Pack 2.3 to 2.4 • Added support for new devices and firmware. See the above table.
• Added Joystick support for PTZ control on the ACTi CAM-6110
• Added support for camera VMD events on many AXIS devices. See the above table.
137 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Added support for PTZ on Verint Smartsight S1700 / S1708.
• Fixed an issue where the Vivotek 6xxx PTZ could crash the monitor.
• Fixed an issue where the D-Link, Vivotek and Verint S1700 devices had gaps in the video stream.
• Fixed an issue where the Pixord 4000 was unable to import PTZ preset positions.
• Fixed an issue where the NetServer6 caused the Monitor to crash when starting.
• Fixed an issue where the Sony DF40 / DF70 could not retrieve MPEG4 images when viewer authentication was enabled on the device.
• Fixed an issue where Sony devices did not refresh monitor images when the frame rate was set to 1 frame per minute.
Changes from Device Pack 2.2b to 2.3
• Added support for new devices and firmware. See the above table.
• Added support for Patrolling on AXIS 231D
• Fixed an issue where search in F1 help could cause the monitor to stall if MPEG4 devices where used.
• Fixed an issue where the monitor could stall when reloading it while one of the following devices had lost its connection: AXIS 207, 210, 210A, 211,
211A, 213, 221, 231, 240Q, 241Q, 241QA, 241S and 241SA.
• Fixed an issue where Videojet 400 could crash the monitor in rare situations when decoding bit stream data with certain data properties.
• Fixed an issue where Preset positions on Vivotek 6122 failed to work if the preset name contained a space.
• Fixed an issue where PTZ did not work on AXIS 213, 231D, 240Q, 241Q, 241QA, 241S and 241SA with firmware 4.30 if PTZ control queue was enabled.
Changes from Device Pack 2.2 to 2.2b • Fixed an issue where camera PTZ settings were not accessible on AXIS 240Q, 241Q, 241QA, 241S and 241SA video servers.
• Fixed an issue where PTZ were enabled as default on AXIS 240Q, 241Q, 241QA, 241S and 241SA video servers that had no previous PTZ configuration.
When upgrading from Device pack 2.2 to 2.2b, PTZ must be disabled manually on these video servers if PTZ is not used.
Changes from Device Pack 2.1 to 2.2 • Added support for new devices and firmware. See the above table.
• Added support for audio on AXIS 241QA & AXIS 241SA.
• Added support for MPEG4 on additional AXIS Cameras.
• MPEG4 streaming method has been changed to reduce latency/delay. This improvement is only visible with Enterprise 5.6a.
• Improved quality of MPEG4 on AXIS 207.
Changes from Device Pack 2.0 to 2.1 • Added support for new devices and firmware. See the above table.
• Added support for MPEG on several AXIS devices. See the above table.
138 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue where only the first 10 preset positions could be imported on AXIS 213/241S/241Q.
• Fixed an issue where cameras could not be detected if German language interface was used for Mobotix M10/M1M and M10M.
Changes from Device Pack 1.9 to 2.0 • Added support for new devices and firmware. See the above table.
• Fixed an issue on ACTi 2100R where lost connection to the device could cause the camera to hang in the Monitor.
• Fixed an issue on ACTi 2100R where the Monitor sometimes incorrectly reported “Cannot retrieve serial number” when more than one ACTi device was
on the network.
• Login account is changed for the ACTi devices from ‘admin’ to ‘Admin’.
• Fixed an issue on Toshiba IK-WB01A where the Monitor could crash if the device delivered corrupt data.
• Fixed an issue on Verint SmartSight S1700 where reconnection after lost connection did not work.
• Fixed an issue on Verint SmartSight S1700 where the Administrator could crash if image settings were adjusted while connection to the device was lost.
• Fixed an issue on VideoJet400 where reconnection after lost connection sometimes did not work.
• Fixed an issue on D-Link DCS-5300 where the image size displayed in Administrator preview was not correct.
• Fixed an issue on D-Link devices and Vivotek VS3102 where the Monitor could not retrieve images if audio was muted. The mute state is now changed
if audio is muted when connecting to the device.
• The Vivotek VS3102 driver has been replaced with two new drivers “Vivotek 3xxx” and Vivotek 3xxx with PTZ”. “Vivotek 3xxx” supports Vivotek IP3122
and Vivotek VS3102 without PTZ enabled. The “Vivotek 3xxx with PTZ” supports Vivotek VS3102 with PTZ enabled. When the Vivotek VS3102 device is
added to the Administrator, it is automatically detected if PTZ is enabled or disabled and the correct driver is selected. If PTZ option is changed on the
device after it has been added to the Administrator, it is required that the correct driver is manually selected.
• Support for FLIR Alarms in the FLIR 241S driver.
Changes from Device Pack 1.8 to 1.9
• Added support for new devices and firmware. See the above table.
• Fixed an issue with the sliders in PTZ Preset Positions setup on AXIS 213.
139 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Fixed an issue on AXIS 213 and AXIS 240Q/241Q/241AQ where not all preset positions were imported.
• Fixed an issue on AXIS 2400/2400+ and AXIS 240Q/241Q/241AQ with zoom level in preset position.
• Fixed an issue on the Pixord 2000 where the I/O operation sometimes did not work.
• Fixed an issue with handling of large images on the JVC C625/C655.
Changes from Device Pack 1.6 to 1.8 • Added support for new devices and firmware. See the above table.
• The Device Pack can now find the installation folder automatically.
• Fixed some issues with setting the image quality on the Pixord 1000, 2000 & 4000.
• Fixed an issue on the Pixord 4000 where the I/O operation sometimes did not work.
• Fixed some issues with setting the image quality and resolution on the IQeye series cameras.
• Some of the AXIS driver names have been changed to match the new supported devices.
Changes from Device Pack 1.2 to 1.6
• Sony SNC-RZ30: Fixed password problem when using PTZ. Added snapshot mode.
• Canon VB-C10: Now handling PAL and NTSC resolutions correctly.
• Panasonic NW470: Handling different resolution in NTSC/PAL versions.
• Convision V600/V700: Updated to support firmware 5.4.2 only.
Changes from Device Pack 1.1 to 1.2 • Baxall X-Stream: I/O Inputs is now named “MXP_*” instead of “ACR_*” when viewing the I/O configuration in the device.
• The iPIX driver now displays the correct resolutions that are supported by the different iPIX camera models.
• Speedup on motion and event is now working correctly for the following devices: AXIS 241Q, AXIS 241S, AXIS 213, AXIS 210, AXIS 211, AXIS 206,
AXIS 2120, AXIS 2130, Xview AP-400 / Linudix, Baxall X-Stream, Lumenera LE175 & the iPIX series cameras.
Installation/Upgrade Guide for XProtect Basis, Basis+, Professional and Enterprise
• Shut down all programs. Start the installation program, and proceed as guided by the installation wizard.
NOTE:
The version number for installed device packages can be found in: Start->Settings->Control Panel->Add or Remove Programs Locate the item “Video
Device Pack Vx.x” in the list of installed programs. The version is written as the last part of the name.
140 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
• Shut down all programs. Start the installation program, and proceed as guided by the installation wizard.
• When the program asks for the surveillance folder, choose the folder where the Matrix Monitor is installed (e.g. C:\Program Files\Milestone\Milestone Matrix Monitor). And ignore the warning given that it’s NOT a surveillance folder.