7/21/2019 Work Manger http://slidepdf.com/reader/full/work-manger 1/14 SAP Work Manager rapid-deployment solution August 2014 English SAP Work Manager rapid- deployment solution: Software and Delivery Requirements SAP AG Dietmar-Hopp-Allee 16 69190 Walldorf Germany Document Revisions Date 0 24.08.2014 1 2
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
7/21/2019 Work Manger
http://slidepdf.com/reader/full/work-manger 1/14
SAP Work Managerrapid-deploymentsolution
August 2014
English
SAP Work Manager rapid-deployment solution:Software and DeliveryRequirements
SAP AGDietmar-Hopp-Allee 16
69190 WalldorfGermany
Document Revisions Date
0 24.08.2014
1
2
7/21/2019 Work Manger
http://slidepdf.com/reader/full/work-manger 2/14
SAP Rapid Deploym ent Solut ions Software and Delivery Requirements
No part of this publication may be reproduced or transmitted in any form or for any purpose without the
express permission of SAP SE or an SAP affiliate company.SAP and other SAP products and services mentioned herein as well as their respective logos aretrademarks or registered trademarks of SAP SE (or an SAP affiliate company) in Germany and othercountries. Please see http://global.sap.com/corporate-en/legal/copyright/index.epx#trademark for additionaltrademark information and notices.
Some software products marketed by SAP SE and its distributors contain proprietary software componentsof other software vendors.
National product specifications may vary.
These materials are provided by SAP SE or an SAP affiliate company for informational purposes only,without representation or warranty of any kind, and SAP SE or its affiliated companies shall not be liable forerrors or omissions with respect to the materials. The only warranties for SAP SE or SAP affiliate companyproducts and services are those that are set forth in the express warranty statements accompanying such
products and services, if any. Nothing herein should be construed as constituting an additional warranty.In particular, SAP SE or its affiliated companies have no obligation to pursue any course of businessoutlined in this document or any related presentation, or to develop or release any functionality mentionedtherein. This document, or any related presentation, and SAP SE’s or its affiliated companies’ strategy an dpossible future developments, products, and/or platform directions and functionality are all subject tochange and may be changed by SAP SE or its affiliated companies at any time for any reason withoutnotice. The information in this document is not a commitment, promise, or legal obligation to deliver anymaterial, code, or functionality. All forward-looking statements are subject to various risks and uncertaintiesthat could cause actual results to differ materially from expectations. Readers are cautioned not to placeundue reliance on these forward-looking statements, which speak only as of their dates, and they shouldnot be relied upon in making purchasing decisions.
Example text Words or characters that appear on the screen. These include fieldnames, screen titles, pushbuttons as well as menu names, paths and
options.Cross-references to other documentation.
Example text Emphasized words or phrases in body text, titles of graphics and tables.
EXAMPLE TEXT Names of elements in the system. These include report names,program names, transaction codes, table names, and individual keywords of a programming language, when surrounded by body text, forexample, SELECT and INCLUDE.
Example text Screen output. This includes file and directory names and their paths,messages, source code, names of variables and parameters as well asnames of installation, upgrade and database tools.
EXAMPLE TEXT Keys on the keyboard, for example, function keys (such as F2) or the
ENTER key.
Example text Exact user entry. These are words or characters that you enter in thesystem exactly as they appear in the documentation.
<Example text> Variable user entry. Pointed brackets indicate that you replace thesewords and characters with appropriate entries.
7/21/2019 Work Manger
http://slidepdf.com/reader/full/work-manger 4/14
SAP Rapid Deploym ent Solut ions Software and Delivery Requirements
1 Purpose of the DocumentThis document contains all information to:
Validate that key prerequisites such as software components and versions match the
customer situation. Check that all prerequisites for a customer implementation are in place
Check that correct content, tools, and skills are in place before the project starts.
The document lists different kinds of requirements on package level if they are valid for all ScopeItems included in the package. For requirements valid for certain scope items only, these scopeitems are mentioned.
The document contains pre-requisites only, not the procedures to meet them. For how-toinformation (for example: how to find the download area), refer to the Package ConfigurationGuide.
2 General Project PrerequisitesThe following prerequisites need to be in place before an implementation project can start.
Prerequisite Responsibility
Kick off and workshop dates, location, and attendees agreed Customer
Customer team allocated with correct skills and training in place Customer
Project sponsors and stakeholder identified Customer
Hardware fully commissioned Customer
Software licenses in place Customer
Infrastructure team can respond to requests quickly enough e.g. CSSnotes, BW content, patches, user requests, authorization changesand transports
Customer
User interfaces agreed for example: SAPGUI, NetWeaver BusinessClient or Portal
Customer
Remote access is in place for SAP consultants and SAP ActiveGlobal Support
Customer
Decision made whether Solution Manager will be used. SolutionManager set up with any relevant templates.
Customer
Tool for project repository and collaboration agreed Customer
Test management tool agreed Customer
3 Technical Requirements
3.1 PrerequisitesThis section summarizes the prerequisites that are assumed to be delivered by the customer,that is, in a phase preceding the actual implementation project.
For Work Manager:
ERP Plant Maintenance processes
For Work Manager with Customer Service:
ERP Customer Service processes
7/21/2019 Work Manger
http://slidepdf.com/reader/full/work-manger 6/14
SAP Rapid Deploym ent Solut ions Software and Delivery Requirements
The SAP Work Manager rapid-deployment solution (V3.61) has been developed and tested onEnhancement Pack 6 on SAP ERP 6.0 with Support Package Stack (SPS) 11.
The SAP Best Practices Configuration Guides for the SAP Work Manager rapid-deploymentsolution have been developed and tested in a system landscape with specific enhancementpackage and support package level. For more recommendations, go through the document
SAP-MobileAddonERP-6.1-Installation for SAP Work Manger 6.1.
The document SAP-MobileAddonERP-6.1-Installation for SAP Work Manager 6.1 provides the
central starting point for the technical implementation of SAP Work Manager rapid-deploymentsolution. Use this guide to obtain an overview of SAP Work Manager 6.1, its software units, andscenarios from a technical perspective.
To access the latest version of the Mobile-AddOn-ERP- 6.1-Installation guide, log on to the SAPService Marketplace (https://www.service.sap.com/swdc ) -> Support Packages and Patches ->Search for Support Packages and Patches -> Enter the Search term as MOBILE ADD-ON FORERP 6.1 and search for it. Choose MOBILE ADD-ON FOR ERP 6.1 hyperlink and click theInstallations and Upgrades to see the Technical Documentation. Choose Technical
Documentation to see Mobile Add-On for ERP 6.1 Documentation.
3.2.1 Requirements
The table lists all software required to implement and run the solution:
Product Product Version Component LogicalComponent inSAP SolutionManager*
*The logical component in SAP Solution Manager is an identifier provided by SAP for thecombination of the product and product version. When we select the SAP SolutionManager template later on, the logical component provided by SAP is automatically
mapped with the logical component in the customer system landscape with the same
7/21/2019 Work Manger
http://slidepdf.com/reader/full/work-manger 8/14
SAP Rapid Deploym ent Solut ions Software and Delivery Requirements
combination of product and product version to set up access from SAP SolutionManager to the correct customer system.
*** While SAP Work Manager rapid-deployment solution has been developed and tested onEnhancement Pack 6 on SAP ERP 6.0 SP06, it works on lower versions of SAP ERP as well(since the underlying product, SAP Work Manager 6.0, is supported on the lower versions ofSAP ERP without any additional configurations) with below mentioned limitations:
The Base Non-LAM version works on SAP ERP 6.0 EHP0 SP15 onwards. For moredetails, refer the Mobile-Add-On-ERP- 6.1-Installation guide.
Linear Asset Management is supported only SAP ERP 6.0 EHP5 SP03 onwards.
SAP Multi resource Scheduling is supported with MRSS 800 SP05 onwards.
3.2.2 Post Installation Requirements for SAP ERP Add-On
After installing SAP Work Manager Rapid-deployment solution, you have to activate the followingBC sets and Extension Sets/Business Functions before you start activating the SAP Best
Practices package content. This gives you the Standard Delivered Mobile ApplicationConfigurations for the work manager application.
(See the Appendix section in this document to know the procedure for activating the BusinessFunctions and BC sets).
Business Function:
Business Functions PlannedStatus
Comment
LOG_EAM_LINEAR_1
ON EAM, Linear Asset Management 1. This businessfunction is available in SAP ERP 600 EnhancementPack 5 release onwards.
/SMERP/EHP5_EAM_ BUS_FUNC
ON ECC 6 Enhancement Package 5 EAM BusinessFunction Extensions
Activate the BC set, based on your scenario:
BC set name Description Comment
/SMERP/SAP_WORK_MANAGER_61_REF
SAP Work Manager 6.1.0 BCSet - Reference
Standard delivered mobileapplication configurations forNON-LAM version of the workmanager application.
/SMERP/SAP_WORKMGR _61_EHP5_REF
SAP Work Manager 6.1.0 forEHP5 with LAM BC Set -Reference
Standard delivered mobileapplication configurations forLAM version of the workmanager application. Youneed to have SAP ECC 6Ehp5 SP03 installed foractivating this BC-set.
/SMERP/SAP_CUST_SERVICE_20_REF
SAP Customer Service 2.0BC Set - Reference
Standard delivered mobileapplication configurations forCustomer Service component
For more details, log on to the SAP Service Marketplace (https://www.service.sap.com/swdc) -> Support Packages and Patches -> Search for Support Packages and Patches -> Enter the
Search term as MOBILE ADD-ON FOR ERP 6.1 and search for it. Choose MOBILE ADD-ONFOR ERP 6.1 hyperlink and click the Installations and Upgrades to see the TechnicalDocumentation. Choose Technical Documentation to see Mobile Add-On for ERP 6.1 -> PostInstallation – Required and Post Installation – Optional
3.2.3 Work Manager Server System Requirements
For more details, refer to http://service.sap.com/swdc -> Release & Upgrade Info -> Installationsand Upgrades -> SAP Components -> SAP Work Manager -> SAP Work Manager 6.1 -> SAPWork Manager 6.1 Installation Guide -> Section Work Manager System Requirements
The scope of the RDS includes the Agentry Server installation with Windows operatingsystem.
3.3 SAP NotesThe following SAP Notes need to be considered.
3.3.1 Rapid Deployment Solution-specific NoteIf issues become apparent after shipment of this SAP rapid-deployment solution (and hence of
this document), a SAP Note exists to document how to solve the issues.
Before you start the activation of the related SAP rapid-deployment scope,check the latest version of the SAP Note for the solution package to obtain updatesand corrections for problems that have not become apparent until after shipment.
SAP Note Short Text Component Comment
2015328 SAP Work Manager rapid-deployment solution
SV-RDS-SYM
Always check the SAP Noteof the SAP Best Practicespackage for updates on the
implementation.
3.3.2 Notes to be considered Apply all SAP Notes to the system via the SAP Note Assistant (transaction SNOTE).
To avoid activation errors as a result of generating loads, perform a mass generation usingtransaction SGEN as described in SAP Note 481548.
SAP Note Short Text Component Comment
1983213 Mobile configuration panelchanges for SAP WorkManager 6.1
MOB-SYC-SAP-ERP
2031174 Software Release Note -SAP Work Manager 6.1
MOB-SYC-SAP
1982598 GIS Integration Support forMobile Add-On 6.10
MOB-SYC-SAP-ERP
1936034 SAP Work Manager ABAP Add-On Installation MasterNote
MOB-SYC-SAP-ERP
2017941 Release Restrictions Note -SAP Work Manager 6.1
MOB-SYC-SAP
2007688 OpenSSL vulnerability(Heartbleed bug) in multiple
Authorizationis defined byyour systemadministrator
Log on to the SAP
ServiceMarketplace(https://www.service.sap.com/swdc ) -> SupportPackages andPatches -> Searchfor SupportPackages andPatches -> Enterthe Search term asMOBILE ADD-ONFOR ERP 6.1 andsearch for it.
Choose MOBILE ADD-ON FORERP 6.1 hyperlinkand click on theInstallations andUpgrades to seethe TechnicalDocumentation.Choose TechnicalDocumentation tosee Mobile Add-On for ERP 6.1Documentationguide -> Section
Activate Security Access Restrictionfor SAPConfigPanel and
Admin Portal
7/21/2019 Work Manger
http://slidepdf.com/reader/full/work-manger 12/14
SAP Rapid Deploym ent Solut ions Software and Delivery Requirements
Information about SupportPackage Stacks, latest softwareversions and patch levelrequirements
http://service.sap.com/sp-stacks
5 Appendix
Procedure to activate Business functions1. Run the following activity:
IMG Menu Activate SAP ECC Extensions
Transaction Code SFW5
2. On the Switch Framework: change Business Function Status screen, select each of thefollowing entries (by selecting the Planned Status column) and then choose the ActivateChanges button:
Business Functions PlannedStatus
Comment
LOG_EAM_LINEAR_1
ON EAM, Linear Asset Management 1. This businessfunction is available in SAP ERP 600 EnhancementPack 5 release onwards.
/SMERP/EHP5_EAM_ BUS_FUNC
ON ECC 6 Enhancement Package 5 EAM BusinessFunction Extensions
3. The system displays an informational dialog box. Choose Continue.
4. Choose Back .
Procedure to activate BC Sets1. Run the following activity:
SAP Menu Tools Customizing Business Configuration Sets
Activation of BC Sets
Transaction Code SCPR20
2. Activate the BC set, based on your scenario:
BC set name Description Comment
/SMERP/SAP_WORK_MANAGER_61_REF
SAP Work Manager 6.1.0BC Set - Reference
Standard delivered mobileapplication configurations forNON-LAM version of the workmanager application.
/SMERP/SAP_WORKMGR _61_EHP5_REF
SAP Work Manager 6.1.0 forEHP5 with LAM BC Set -Reference
Standard delivered mobileapplication configurations forLAM version of the workmanager application. You needto have SAP ECC 6 Ehp5SP03 installed for activatingthis BC-set.
/SMERP/SAP_CUST_SERVICE_20_REF
SAP Customer Service 2.0BC Set - Reference
Standard delivered mobileapplication configurations forCustomer Service component