WinTR-20 Computation Methods June 2015 1 WinTR-20 Project Formulation Hydrology Computer Program How does WinTR-20 compute results ? Presented by: WinTR-20.

WinTR-20 Computation Methods June 2015 1

WinTR-20 Project Formulation Hydrology

Computer Program

How does WinTR-20 compute results ?

Presented by: WinTR-20 Development Team

WinTR-20 Computation Methods June 2015

2

WinTR-20 Computation Differences

Runoff hydrographs Time of Concentration Adjusting curve numbers Adding hydrographs Diverting or dividing hydrographs Structure Routing Reach Routing Smoothing NOAA Atlas 14 and NRCC data

WinTR-20 Computation Methods June 2015

3

Runoff Hydrographs

WinTR-20 will compute runoff hydrographs according to NEH Part 630 Chapter 16 Hydrographs (2007).

The time increment used to develop the hydrograph is computed internally in WinTR-20.

However, the user may set a time increment for output (interpolated values).

WinTR-20 Computation Methods June 2015

4

Runoff Hydrographs (cont)To see the internal time increment in WinTR-20,

leave the Print Time Increment blank on the Global Output window.

WinTR-20 Computation Methods June 2015

5

Runoff Hydrographs(continued)

The table above is the dimensionless unit hydrograph (DUH) with PRF 484.

The peak of the DUH is at point number 11.Delta t = 0.6 Tc / ((point number – 1) – 0.5)Delta t = 0.063 Tc

WinTR-20 Computation Methods June 2015

6

Runoff Hydrographs (cont)

The table above the DUH for PRF 350.The peak of the DUH is at point number 6.Delta t = 0.6 Tc / ((point number – 1) – 0.5)Delta t = 0.133 Tc

WinTR-20 Computation Methods June 2015

7

Calculating Time of Concentration (Tc)

Besides direct entry of a Tc value, WinTR-20 has two options for computing Tc.

Velocity Method for Tc from WinTR-55 computer program. Uses sheet flow, shallow concentrated flow, and channel flow segments.

Lag Method for Tc calculation from EFH-2 computer program. Uses curve number, watershed length, and watershed slope.

WinTR-20 Computation Methods June 2015

8

Velocity method for Tc

WinTR-20 Computation Methods June 2015

9

Calculating Sheet Flow Travel Time

WinTR-20 Computation Methods June 2015

10

Calculating Shallow Con-centrated Flow Travel Time

Tt = Length (feet) / V (feet/sec) / 3600 (sec/hr)

WinTR-20 Computation Methods June 2015

11

Calculating Channel Flow Travel Time

or Channel Velocity may be entered directly in data window.

Tt = Length (feet) / V (feet/sec) / 3600 (sec/hr)

WinTR-20 Computation Methods June 2015

12

Lag Method for Tc

WinTR-20 Computation Methods June 2015

13

Lag Method for Tc

WinTR-20 Computation Methods June 2015

14

Viewing Tc calculations

Select Sub-Area Tc Computations. Tc calculations for each sub-area will be placed in the .dbg output file.

WinTR-20 Computation Methods June 2015

15

Viewing Tc calculations

From the View pull-down menu select Debug File.

WinTR-20 Computation Methods June 2015

16

Adjusting curve numbersTwo methods have been added to WinTR-20

to adjust the curve number of a sub-area.One allows entry of an ARC value for a sub-

area (used in Texas and Kansas).The second allows the user to reduce the

curve number by a specific value for a sub-area (used in Oklahoma).

These two methods are used to adjust curve number to calculate peak discharges for design of certain conservation practices.

WinTR-20 Computation Methods June 2015

17

Adjust curve number by ARC

ARC may be any value from 1.0 to 3.0Original CN tables are based on ARC 2For example, adjust CN 80 from ARC 2 to

ARC 1.6If CN is 80 for ARC 2, then CN is 63 for

ARC 1Use a linear interpolation to calculate CN

73.2 for ARC 1.6

WinTR-20 Computation Methods June 2015

18

Reduce curve number by specific value

CN may be reduced by a number from 1 to 14.

For example, if the CN for ARC 2 is 78 and reduced by 8, WinTR-20 will use a CN of 70 for this sub-area.

WinTR-20 Computation Methods June 2015

19

Adding Hydrographs

Two hydrographs may be combined or added such as where two streams join at a junction.

If the time intervals are the same, the discharges are added directly.

If time intervals are different (as they generally are) WinTR-20 will combine hydrographs using the following method.

WinTR-20 Computation Methods June 2015

20

Adding Hydrographs (cont)

For example, let us add hydrographs A and B.Hydrograph A has a time interval of 0.1 hour

and Hydrograph B has an interval of 0.33 hour.Hydrograph A is interpolated to a time interval

of 0.33 hour and added to Hydrograph B.Hydrograph B is interpolated to an interval of

0.1 hour and added to Hydrograph A.

WinTR-20 Computation Methods June 2015

21

Adding Hydrographs (continued)

Whichever hydrograph has the higher peak is saved for further operations downstream.

WinTR-20 Computation Methods June 2015

22

Diverting or dividing hydrographs

There are two methods of splitting a hydrograph in WinTR-20.

Split based on two cross section rating curves.

Divert an inflow hydrograph above a specific discharge.

WinTR-20 Computation Methods June 2015

23

Divide based on two rating curves

WinTR-20 Computation Methods June 2015

24

Divert above a specific discharge

WinTR-20 Computation Methods June 2015

25

Structure Routing

The storage indication method (described in NEH Part 630 Hydrology Chapter 17) is used to route the inflow hydrograph through the structure.

WinTR-20 Computation Methods June 2015

26

Maximum number of Hydrograph Points

The maximum number is 100,000.This allows WinTR-20 to save hydrographs at

extremely short time intervals.Sometimes with structure routings with very

low release rates, this 100,000 point limit can be exceeded.

WinTR-20 Computation Methods June 2015

27

Channel Reach Routing

The Muskingum-Cunge method is described in NEH Part 630 Chapter 17. Examples are provided.

WinTR-20 training module 8 presents the Muskingum-Cunge method of routing.

WinTR-20 Computation Methods June 2015

28

Smoothing NOAA 14 and NRCC Data

When importing NOAA 14 or NRCC rainfall data there is an option to smooth the data.

The 60-minute and 24-hour precipitation values are not changed. Precipitation for other durations may be adjusted.

Smoothing the data provides for a smooth rainfall distribution and relatively smooth runoff hydrograph.

WinTR-20 Computation Methods June 2015

29

Smoothing NOAA 14 and NRCC Data

Import and select Smooth option. From the View pull-down menu select Smoothed NOAA/NRCC File.

WinTR-20 Computation Methods June 2015

30

Smoothing NOAA 14 and NRCC Data

This example is for the 25-year return period NOAA 14 data at College Park, MD.

“Precip” is the original NOAA 14 data.“Inc_Int” is the incremental intensity for the

original NOAA 14 data.The “Sm” refers to smoothed data.

WinTR-20 Computation Methods June 2015

31

Smoothing NOAA 14 and NRCC Data

Incremental Intensity is the difference in precipitation divided by the difference in duration converted to inches / hour.

At 5-minute duration,

WinTR-20 Computation Methods June 2015

32

Smoothing NOAA 14 and NRCC Data

At 30 minute duration,

WinTR-20 Computation Methods June 2015

33

Smoothing NOAA 14 and NRCC DataIncremental Intensity is the difference in

precipitation divided by the difference in duration converted to inches / hour.

At 5-minute duration,

At 30 minute duration,

WinTR-20 Computation Methods June 2015

34

Smoothing NOAA 14 and NRCC Data

Smoothed Incremental Intensity.

WinTR-20 Computation Methods June 2015

35

Smoothing NOAA 14 and NRCC Data

Smoothed precipitation values.

WinTR-20 Computation Methods June 2015 36

The End

WinTR-20 Computation Methods June 2015

37