This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
MACHINE/ATTACHMENT SELECTIONThe Integrated Toolcarrier’s versatility and the wide
range of attachments makes the “single machine fleet” concept highly attractive to an increasing number of users.
A Job Analysis helps identify applications, work require ments, material handling parameters and the cur rent working method. Thoroughly research each ele ment in the following chart, the gathered infor ma-tion will help select the proper Integrated Tool carrier System.
Work Processes:The first step in the job analysis is to identify all work
processes from start to finish. Key questions outlined below will begin to indicate the required attachments and potential Integrated Toolcarrier applications.
● What kinds of work are performed: (e.g., dozing, loading, stacking, digging, sweeping, handling special materials, etc.)
... in site preparation?
... below ground level?
... at ground level?
... above ground level?
... in landscaping?
... in maintenance equipment yard?etc.
● What work is done manually that could be done with an Integrated Toolcarrier?
● What are the work conditions?: ... underfoot?
... grades?
... tight quarters?
... time restraints?
... climate?etc.
Materials Handled:Examining the materials handled will assist in deter-
mining necessary attachments. Sizes and weights of mate rial(s) handled will indicate the appropriate Inte-grated Toolcarrier model by defining lift and reach require ments. Concentrate on the material flow at the job site — the point of origin as well as the final desti-na tion for the various materials will undoubtedly have material handling requirements.● What kinds of materials are handled (e.g. snow, earth,
bricks, chemicals, pipe, logs, etc.)● What form are the materials handled in: bulk?
palletized?● How much does each weigh?● What are the dimensions of each?● What are the... movement
parameters: ... dozed what distance?... load and carried what
distance?... lifted how high?... placed below ground
level?... placed what distance
from machine?
JOB ANALYSIS METHOD
● APPROPRIATE INTEGRATED TOOLCARRIER MODEL SIZE
● NECESSARY ATTACHMENTS
UTILIZATION & SEQUENCE?
CURRENT EQUIPMENT?
MATERIALS HANDLED?
PRINCIPAL WORK
WORK PROCESSES?
PHB-Sec23(pg175-290).indd 228PHB-Sec23(pg175-290).indd 228 12/20/13 9:07 AM12/20/13 9:07 AM
Current Equipment:If determining material weight is not possible, much
information can be determined from looking at the current equipment fleet. This will suggest required per-for mance capabilities such as lifting capacity.● Machines currently doing the work (e.g. wheel load-
● What special (maximum) capabilities does each machine have (production, lift height, load capacity, width/height dimensions, reach, turning radius, travel speed, etc.)?
● To what extent are each machine’s maximum capa-bilities used?
● What are owning/operating costs of each?
Utilization & Sequence:Utilization implies how often the current machines
are used and what will be the utilization factors for the Integrated Toolcarrier with each individual attach ment. Sequence implies what order these tasks are accom plished in and if two or more machines operate at the same time. This portion of the job analysis should assist in com-par ing economies of various systems. Other important con sid erations may be the number of operators needed, storage space, reduced maintenance requirements, etc.● How often (what percent) is each machine used?● How often and when does it sit idle?● How often and when do two or more machines work
at the same time?● Can the operation be changed to permit single machine
operation?
Principal Work:Utilization and sequence will indicate the principal
work the Integrated Toolcarrier will do, further assist-ing in attachment and model sizing and selection. The basic machine/tool package should be able to handle the toughest, most frequently performed jobs for the primary application. Secondary tools can have a little more “give and take” in their performance capabilities than the primary tool.● What work can be accomplished by an Integrated
Toolcarrier?● What work will take up the majority of Integrated
Tool carrier time?● What work will use the maximum static tipping capa-
bilities of the Integrated Toolcarrier?● What high cost (owning and operating) and/or low
utilization machines can be replaced by an Inte grated Toolcarrier?
Additional Tips for Tool Sizing and SelectionTool selection will principally concern hydraulic power
requirements and static tipping load considerations. The standard tools offered by Caterpillar can be used on any Integrated Toolcarrier machine with little difficulty. However, tools such as the hydraulic broom, claws, blades and asphalt cutter will require additional consideration before proposing a system to the customer.
Fork Rating
Table indicates rated pallet fork load at standard ma chine configuration, 600 mm (24") load center, 1200 mm (3'11") fork on IT14G2-930H, see operator man-ual to determine rated load for vehicle configuration being used.Model kg lb Model kg lbIT14G2 1870 4123 930K High Lift 2476 5459924K Standard 2864 6313 938K Standard 3765 8297924K High Lift 2284 5035 938K High Lift 2941 6483930K Standard 3251 7165
PHB-Sec23(pg175-290).indd 229PHB-Sec23(pg175-290).indd 229 12/20/13 9:07 AM12/20/13 9:07 AM
noted by the asterisks. See operator manual to deter-mine rated load for vehicle configuration being used.
1.4 m3 (1.75 yd3) with Bolt-on Cutting EdgeIT14G2* 2273 kg 5000 lb
1.3 m3 (1.7 yd3) with Bolt-on Cutting Edge910K 2145 kg 4730 lb
1.5 m3 (2.0 yd3) with Bolt-on Cutting Edge914K 2390 kg 5269 lb
1.9 m3 (2.5 yd3) with Bolt-on Cutting Edge924K*** Standard 3710 kg 8179 lb924K*** High Lift 2946 kg 6494 lb
2.1 m3 (2.7 yd3) with Bolt-on Cutting Edge924K*** Standard 3671 kg 8093 lb924K*** High Lift 2725 kg 6008 lb
2.1 m3 (2.7 yd3) with Bolt-on Cutting Edge930K**** Standard 4185 kg 9226 lb930K**** High Lift 2959 kg 6523 lb
2.3 m3 (3.0 yd3) with Bolt-on Cutting Edge930K**** Standard 4146 kg 9140 lb930K**** High Lift 2920 kg 6437 lb
2.5 m3 (3.3 yd3) with Bolt-on Cutting Edge938K**** Standard 4764 kg 10,503 lb938K**** High Lift 3451 kg 7608 lb
2.7 m3 (3.5 yd3) with Bolt-on Cutting Edge938K**** Standard 4719 kg 10,404 lb938K**** High Lift 4589 kg 10,117 lb**** Specifications shown are for high-speed version IT14G2 and include
lubri cants, full fuel tank, ROPS cab, 80 kg (176 lb) operator, standard 250 kg (550 lb) counterweight and 17.5-R25 (L-2 equivalent) tires.
**** Specifications shown include lubricants, full fuel tank, limited slip axles, heavy duty rear brakes, optional counterweights, additional guarding, ROPS cab with A/C, 80 kg (176 lb) operator and 20.5-R25 (L-3) tires.
**** Specifications shown include lubricants, full fuel tank, standard counter-weights, additional guarding, 80 kg (176 lb) operator, and 20.5 R25 (L-3) XHA2 tires.
**** Specifications shown include lubricants, full fuel tank, heavy counter-weights, additional guarding, 80 kg (176 lb) operator, and 20.5 R25 (L-3) XHA2 tires.
The charts explain each machine’s maximum pay-load. The maximum material density would be deter-mined by dividing the payload by the bucket capacity. If the actual material density exceeds the recommended material density, the process should be repeated to select the properly sized bucket.
A similar procedure would be used with the forks and material handling arm to determine maximum rec om-mended lifting capacity and/or required IT model size.
Pallet ForkThe pallet fork will fulfill many material handling
needs. A modified Class 3 fork carriage provides visi-bility to the tines for precision pallet work. This car-riage with non-standard spacing accepts many Class 3 lift truck attachments.
Pallet fork rated operating loads are based on the following:
SAE J1197 FEB91: 50% of the full turn static tip-ping load or the hydraulic/structural limitations.
CEN 474-3 (European standard): 60% of the full static tipping load on rough terrain or the hydraulic/struc tural limitations. 80% of the full turn static tipping load on firm, level ground or the structural/hydraulic limitation. Other local, regional or international guide-lines may also apply.
If operation is on rough ground these criteria may need modification. In this instance, the size and rating of existing equipment should be considered.
Sizing for pallet work generally consists of answering the following questions.1. What are the average loaded pallet dimensions?2. Lift Capacity — what capacity is required to lift and
move the average pallet load? The maximum pallet load?
3. Lift Height — can the machine reach the top level of the standard pallet stack? What are the maxi mum reach, lift and height requirements?
4. Maneuverability — can the machine work around the current aisle configuration? In the stacking aisles? Main aisles? Intersecting aisles? Are 90° turns required in any aisle for material placement?
5. Length — what tine length is required to fit the com-monly used pallets? (1219 mm [4'0"] tines are standard length for most palletized material.)
6. Any machine height restrictions?7. Any special fork configurations required?
Lift capacity, lift height, aisle configuration and tine length are the most important considerations in recom-mending a pallet handling machine.
PHB-Sec23(pg175-290).indd 230PHB-Sec23(pg175-290).indd 230 12/20/13 9:07 AM12/20/13 9:07 AM
The following example applies the job analysis method to a work situation.
Sewer & Water ContractorSets water lines (152 mm-610 mm [6 in-24 in] iron
pipe), sanitary sewer lines (152 mm-457 mm [6 in-18 in] PVC) and storm sewer lines (610 mm-1067 mm [24 in- 42 in] concrete pipe) primarily in urban areas ... often-times across or down existing streets.
Operating Load at Full Turn*Model kg lbIT14G2 1810 5991924K Standard 2781 6131924K High Lift 2224 4903930K Standard 3158 6962930K High Lift 2414 5322938K Standard 3661 8071938K High Lift 2869 6325
Water pipes:1309 kg (2885 lb)
IT14G2 ... 1 pipe — no problem924K Standard ... 1 pipe — no problem924K High Lift ... 1 pipe — no problem930K ... 1 pipe — no problem930K High Lift ... 1 pipe — no problem938K ... 1 pipe — no problem938K High Lift ... 1 pipe — no problem
Storm sewer pipes:1556 kg (3430 lb)
IT14G2 ... 1 pipe — no problem924K Standard ... 1 pipe — no problem924K High Lift ... 1 pipe — no problem930K ... 1 pipe — no problem930K High Lift ... 1 pipe — no problem938K ... 1 pipe — no problem938K High Lift ... 1 pipe — no problem
* Note that the most conservative operating load (SAE J1197 FEB91) is used here. The rated operating load for some competitive machines with pallet forks will be based upon European standard CEN 474-3, assuming operation on firm and level ground (i.e. using 80% of full turn static tipping load).
PHB-Sec23(pg175-290).indd 231PHB-Sec23(pg175-290).indd 231 12/20/13 9:07 AM12/20/13 9:07 AM
Performance Series Buckets
Performance Series Buckets utilize a system-based approach to balance bucket shape against the machine’s linkage, weight, lift and tilt capacities. The result is a bucket optimized for performance and productivity, and intended for use in production applications. Perfor-mance Series Buckets for Wheel Loaders are designed for use in truck loading, stockpiling and load-and-carry applications. Per formance is improved over current buckets in these production applications with materials such as sand, gravel and aggregates.
Loads EasyProven design characteristics improve material flow
into the bucket and improve material retention during transport. In some situations, the number of passes required to fill a truck is reduced. Performance Series Buckets are designed for optimum performance on the machine. Profile changes (over current buckets) improve load-abil ity and make Performance Series Buckets machine-specific.
Fuel EfficientPerformance Series Buckets have a longer floor — easily
digging through the pile. Less time in the pile equals less fuel consumed.
Higher Fill FactorsWhen comparing buckets of the same rated capacity,
Performance Series Buckets have higher fill factors — up to 115%.
Move More Material with the Same Rated CapacityMore material can be moved with a Performance Series
Bucket compared to a same-size rated capacity current bucket. Likewise, a smaller Performance Series Bucket can be utilized to move the same amount of material as a larger rated capacity current bucket.
Carries MoreProductive
Bucket shape and strike plane angle are designed for material retention and consistent load sizes. More mate-rial loads into the bucket and is carried all the way to the truck, hopper or stockpile.
A spill guard diverts overflow away from hinge pins, lift arms, hydraulic cylinders and tilt sensors help ing to protect these areas of the machine.
Bucket SpecificationsPerformance Series Buckets are designed to bring opti-
mum performance to a specific machine. Profile changes over current buckets allow higher fill factors and increased production.
Incompatibility on the 950H and 962HThe recent linkage change on the 950K and 962K has
created some incompatibility issues with the Fusion Per formance Series Buckets. Because the bucket shape has been optimized for the machine linkage, Fusion Per-formance Series Buckets designed for use on the 950K and 962K will experience interference with the linkage on the 950H and 962H. For this reason 950K and 962K Performance Series Buckets should NOT be used on the 950H and 962H machines.
Incompatibility on the 966H/K/MBecause 972H/K/M Performance Series Buckets are
designed specifically for performance on the 972H/K/M — their shape brings some incompatibilities with the 966H/K/M machine. These buckets can be pinned on to the 966H, but will experience interference with machine linkage in the rack back position. For this reason, 972H/K/M Performance Series Buckets should not be used on 966H/K/M machines. This is different than current General Purpose Buckets.
23-232 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine/Attachment Selection
PHB-Sec23(pg175-290).indd 232PHB-Sec23(pg175-290).indd 232 12/20/13 9:07 AM12/20/13 9:07 AM
23
Certain Bucket Sizes Require Additional Counterweight
Compared to a current bucket of the same rated capac-ity, Performance Series Buckets will move more mate-rial. To maintain appropriate machine stability, 980H machines utilizing the two larger Performance Series Buckets must be equipped with the aggregate loader counterweight. This is required for machine stability based on the bucket size/fill factor combination.
Compatible with G and G II machinesPerformance Series Buckets for 988-size machines are
compatible with standard and high lift linkages on G and G II Series machines.
Material Handling Arm (MHA)The rated load for the MHA is 50% of the full turn
static tipping load in each position or hydraulic or struc-tural limitations. Manually extendable telescopic sections enable maximum lifting capacity at the full retracted position, and maximum lift height and reach in the fully extended position.
Operating Load at Full Turn
Model Retracted Mid ExtendedIT14G2 1370 kg 1067 kg 8888 kg
3021 lb 2373 lb 1958 lb924K StandardHook On
1903 kg 1614 kg 1401 kg4148 lb 3518 lb 3055 lb
924K High LiftHook On
1608 kg 1386 kg 1218 kg3545 lb 3056 lb 2685 lb
930K StandardHook On
2158 kg 1830 kg 1589 kg5188 lb 4034 lb 3502 lb
930K High LiftHook On
1763 kg 1525 kg 1343 kg3886 lb 3361 lb 2961 lb
938K StandardHook On
2737 kg 2134 kg 1855 kg6032 lb 4702 lb 4088 lb
938K High LiftHook On
2091 kg 1808 kg 1593 kg4608 lb 3986 lb 3512 lb
Storm sewer pipes:1556 kg (3430 lb)
IT14G2 ... no924K ... yes in retracted and mid930K ... yes in retracted, mid, and extended938K ... yes in retracted, mid, and extended
Manhole boxes:1361 kg (3000 lb)
IT14G2 ... no924K ... yes in retracted and mid930K ... yes in retracted, mid, and extended938K ... yes in retracted, mid, and extended
BucketsAll general purpose buckets are interchangeable on
924K-938K due to common attachment points on the quick couplers. Bucket selection will depend on the material density in your application. Offering multiple sized buckets allows the user the flexibility to closely match material density and bucket size with machine capa bility. Equipping a machine with too large a bucket will result in unacceptable stability — too small a bucket may provide inadequate tire coverage.
Bucket 1780 kg/m3 (3000 lb/yd3) ... 100% fill factor
PHB-Sec23(pg175-290).indd 233PHB-Sec23(pg175-290).indd 233 12/20/13 9:07 AM12/20/13 9:07 AM
23-234 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine/Attachment Selection
Model Bucket Payload50% Full Turn Static Tipping
924K* Hook On 1.9 m3 3382 kg 3710 kg2.5 yd3 7456 lb 8179 lb2.1 m3 3738 kg 3671 kg2.7 yd3 8241 lb 8093 lb2.3 m3 4094 kg 3634 kg3.0 yd3 9026 lb 8012 lb
930K* Hook On 2.1 m3 3738 kg 4185 kg2.7 yd3 8241 lb 9226 lb2.3 m3 4094 kg 4146 kg3.0 yd3 9026 lb 9140 lb2.5 m3 4450 kg 4077 kg3.3 yd3 9811 lb 8988 lb
938K* Hook On 2.5 m3 4450 kg 4764 kg3.3 yd3 9811 lb 10,503 lb2.7 m3 4806 kg 4720 kg3.5 yd3 10,595 lb 10,406 lb2.9 m3 5162 kg 4684 kg3.8 yd3 11,380 lb 10,326 lb
NOTE: Metric numbers are a product of conversion.**924K, 930K, and 938K equipped with Michelin 20.5-R25 XHA2 tires.**924H and 930H equipped with Michelin 20.5-R25 XHA tires.
Machine/Attachment Recommendation930K — The greater static tipping load capabilities allow it to do a greater portion of the contractor’s total work processes. With the following attach ments, the 930K could replace part or all of the specialty units, such as the wheel loader, rough terrain lift truck, street sweeper, and/or the trench compactor.2.1 m3 (2.75 yd3), 2.3 m3 (3.0 yd3), or 2.5 m3 (3.25 yd3) General Purpose Bucket1350 mm (53 in) forks (handles all pipes)Material Handling Arm — (handles pipe sizes under 1067 mm (42 in) concrete and manhole boxes ... 225 would have to set 1219 mm (48 in) and larger concrete pipeBroom
Optional Attachments to Consider:24-LH compactor wheelRebar snipsAsphalt cutter
PHB-Sec23(pg175-290).indd 234PHB-Sec23(pg175-290).indd 234 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-235
Wheel LoadersIntegrated Toolcarriers
23
Buckets● Americas North
Model Interface Bucket TypeWidthRange
CapacityRange
WeightRange GET
mm in m3 yd3 kg lb924K Fusion General Purpose
Performance Series 2550 100 1.9-2.5 2.5-3.2 775-963 1705-2119 J250/BOCE
ISO General Purpose 2550-2750 100-108 2.1-2.9 2.7-3.8 775-997 1705-2193 J250/BOCEPin On General Purpose 2550 100 1.9-2.2 2.5-3.0 812-893 1786-1965 J250/BOCE
ISO General Purpose 2550-2750 100-108 2.1-2.9 2.7-3.8 775-997 1705-2193 J250/BOCEPin On General Purpose 2550 100 1.8-2.5 2.5-3.2 812-979 1786-2154 J250/BOCE
ISO General Purpose 2550-2750 100-108 2.1-2.9 2.7-3.8 775-997 1705-2193 J250/BOCEPin On General Purpose 2550-2750 100-108 2.4-2.8 3.2-3.8 968-1059 2134-2330 J250/BOCE
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.
924K (LRC) Fill Factors
Materials Density Fill %
Earth and rock ~ 1800 kg/m3 ~ 3033 lb/yd3 ~ 115%
Sand and gravel ~ 1700 kg/m3 ~ 2865 lb/yd3 ~ 115%
Aggregates ~ 1600 kg/m3 ~ 2696 lb/yd3 ~ 105%
Bulk grains ~ 750 kg/m3 ~ 1264 lb/yd3 ~ 100%
Woodchips ~ 500 kg/m3 ~ 843 lb/yd3 ~ 100%
Bucket Selection● 924K (LRC)
PHB-Sec23(pg175-290).indd 265PHB-Sec23(pg175-290).indd 265 12/20/13 9:07 AM12/20/13 9:07 AM
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.
930K (LRC) Fill Factors
Materials Density Fill %
Earth and rock ~ 1800 kg/m3 ~ 3033 lb/yd3 ~ 115%
Sand and gravel ~ 1700 kg/m3 ~ 2865 lb/yd3 ~ 115%
Aggregates ~ 1600 kg/m3 ~ 2696 lb/yd3 ~ 105%
Bulk grains ~ 750 kg/m3 ~ 1264 lb/yd3 ~ 100%
Woodchips ~ 500 kg/m3 ~ 843 lb/yd3 ~ 100%
PHB-Sec23(pg175-290).indd 266PHB-Sec23(pg175-290).indd 266 12/20/13 9:07 AM12/20/13 9:07 AM
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.
938K (LRC) Fill Factors
Materials Density Fill %
Earth and rock ~ 1800 kg/m3 ~ 3033 lb/yd3 ~ 115%
Sand and gravel ~ 1700 kg/m3 ~ 2865 lb/yd3 ~ 115%
Aggregates ~ 1600 kg/m3 ~ 2696 lb/yd3 ~ 105%
Bulk grains ~ 750 kg/m3 ~ 1264 lb/yd3 ~ 100%
Woodchips ~ 500 kg/m3 ~ 843 lb/yd3 ~ 100%
PHB-Sec23(pg175-290).indd 267PHB-Sec23(pg175-290).indd 267 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
NOTE: All buckets are showing Bolt-On Edges.These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 273PHB-Sec23(pg175-290).indd 273 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 274PHB-Sec23(pg175-290).indd 274 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availabilit
PHB-Sec23(pg175-290).indd 275PHB-Sec23(pg175-290).indd 275 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges.These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 276PHB-Sec23(pg175-290).indd 276 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 277PHB-Sec23(pg175-290).indd 277 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 278PHB-Sec23(pg175-290).indd 278 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets.These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 279PHB-Sec23(pg175-290).indd 279 12/20/13 9:07 AM12/20/13 9:07 AM
PHB-Sec23(pg175-290).indd 285PHB-Sec23(pg175-290).indd 285 12/20/13 9:07 AM12/20/13 9:07 AM
986H — Standard LiftMaterial Density Bucket Volume
kg/m3 tonnes/m3 lb/yd3 tons/yd3 m3 yd3
1632-1795 1.63-1.80 2750-3025 1.38-1.51 6.1 8
1740-1914 1.74-1.91 2933-3227 1.46-1.61 5.7 7.5
1865-2051 1.86-2.05 3143-3457 1.57-1.73 5.4 7
*Density range covers 100% rated payload to 110% rated payload in accordance with Large Wheel Loader payload policy.
23-286 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Selection● 986H
PHB-Sec23(pg175-290).indd 286PHB-Sec23(pg175-290).indd 286 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-287
Bucket Selection● 988K, 990H
Wheel LoadersIntegrated Toolcarriers
988KMaterial Density Bucket Volume
kg/m3 tonnes/m3 lb/yd3 tons/yd3 m3 yd3
1468-1614 1.47-1.61 2500-2750 1.25-1.38 7.7 10
1638-1801 1.64-1.80 2778-3056 1.39-1.53 6.9 9
1766-1942 1.77-1.94 3001-3300 1.50-1.65 6.4 8.33
990HMaterial Density Bucket Volume
kg/m3 tonnes/m3 lb/yd3 tons/yd3 m3 yd3
1590-1749 1.59-1.75 2692-2962 1.35-1.48 10 13
1728-1901 1.73-1.90 2917-3208 1.46-1.60 9.2 12
1849-2034 1.85-2.03 3111-3422 1.56-1.71 8.6 11.25
PHB-Sec23(pg175-290).indd 287PHB-Sec23(pg175-290).indd 287 12/20/13 9:07 AM12/20/13 9:07 AM
992K — Standard Up to specified density for 100% fill factor
Bucket Volume Material Density
m3 yd3 kg/m3 lb/yd3
12.2 16 1780 3000
11.5 15 1890 3200
10.7 14 2030 3430
992K — High Lift Up to specified density for 100% fill factor
Bucket Volume Material Density
m3 yd3 kg/m3 lb/yd3
12.2 16 1560 2630
11.5 15 1560 2630
10.7 14 1560 2630
993K — Standard Up to specified density for 100% fill factor
Bucket Volume Material Density
m3 yd3 kg/m3 lb/yd3
15.3 20 1780 3000
14.5 19 1870 3160
13.8 18 1970 3330
993K — High Lift Up to specified density for 100% fill factor
Bucket Volume Material Density
m3 yd3 kg/m3 lb/yd3
14.5 19 1720 2890
13.8 18 1810 3060
13.0 17 1920 3240
23-288 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Selection● 992K–993K
PHB-Sec23(pg175-290).indd 288PHB-Sec23(pg175-290).indd 288 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-289
Bucket Selection● 994H
Wheel LoadersIntegrated Toolcarriers
2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4
1.4 1.6 1.8 2.0 2.2 2.4 2.6
19
17
15
24.5
22.5
19.5
MATERIAL DENSITY (THOUSANDS)
994HRated Payload 34 470 kg (76,000 lb)
BU
CK
ET
CA
PAC
ITY
yd3m3
kg/m3
lb/yd3
2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4
1.4 1.6 1.8 2.0 2.2 2.4 2.6
19
17
15
24.5
22.5
19.5
MATERIAL DENSITY (THOUSANDS)
994H — High, Extended High LiftsRated Payload 30 840 kg (68,000 lb)
BU
CK
ET
CA
PAC
ITY
yd3m3
kg/m3
lb/yd3
% = Bucket Fill Factor
110% 95%100%
Standard
PHB-Sec23(pg175-290).indd 289PHB-Sec23(pg175-290).indd 289 12/20/13 9:07 AM12/20/13 9:07 AM
NOTE: Machines equipped same as those on Performance Data pages.
3.1 (4.0)
3.3 (4.25)
2.5 (3.25)
2.0 (2.6)
1.8 (2.4)
1.6 (2.0)
1.4 (1.8)1.3 (1.7)1.2 (1.6)
1.0 (1.31)
A
2000
2500
3000
3500
4000
4500
5000
1200
1500
1800
2100
2400
2700
3000
BUCKET SELECTION BASED ON MATERIAL DENSITY
lb/yd3
kg/m3
MATERIAL DENSITY
m3 (yd3)
BUCKETCAPACITY
KEY
A — IT14G2
23-290 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Selection● IT14G2
PHB-Sec23(pg175-290).indd 290PHB-Sec23(pg175-290).indd 290 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-291
Wheel LoadersIntegrated Toolcarriers
23
Travel Time — Loaded● 930K
● 20.5R-25 Tires
930K TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Travel time assumes maximum governor pedal depression and automatic shifting in Range 4.
In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 291PHB-Sec23(pg291-336).indd 291 12/20/13 9:07 AM12/20/13 9:07 AM
23-292 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Empty● 930K● 20.5R-25 Tires
930K TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Travel time assumes maximum governor pedal depression and automatic shifting in Range 4.
In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 292PHB-Sec23(pg291-336).indd 292 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-293
Wheel LoadersIntegrated Toolcarriers
23
Travel Time — Loaded● 938K
● 20.5R-25 Tires
938K TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Travel time assumes maximum governor pedal depression and automatic shifting in Range 4.
In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 293PHB-Sec23(pg291-336).indd 293 12/20/13 9:07 AM12/20/13 9:07 AM
23-294 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Empty● 938K● 20.5R-25 Tires
938K TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Travel time assumes maximum governor pedal depression and automatic shifting in Range 4.
In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 294PHB-Sec23(pg291-336).indd 294 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-295
Travel Time — Loaded● 950K ● 950H● 23.5-R25 Tires
Wheel LoadersIntegrated Toolcarriers
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
950K TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
3
0 50 100 150 200 250
950H TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 295PHB-Sec23(pg291-336).indd 295 12/20/13 9:07 AM12/20/13 9:07 AM
23-296 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Empty● 950K ● 950H● 23.5-R25 Tires
2%4%
6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
950K TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%4%
6%8%
10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
950H TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 296PHB-Sec23(pg291-336).indd 296 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-297
Travel Time — Loaded● 962K ● 962H● 23.5-R25 Tires
Wheel LoadersIntegrated Toolcarriers
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
962K TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
3
0 50 100 150 200 250
962H TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 297PHB-Sec23(pg291-336).indd 297 12/20/13 9:07 AM12/20/13 9:07 AM
23-298 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Empty● 962K ● 962H● 23.5-R25 Tires
2%4%
6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
962K TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%4%
6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
962H TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 298PHB-Sec23(pg291-336).indd 298 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-299
Wheel LoadersIntegrated Toolcarriers
23
Travel Time — Loaded and Empty● 966M
● 26.5-R25 Tires
2%4%6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
966M TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
966M TRAVEL TIME — EMPTY
2%4%6%
8%10%
15%
20%
0
0.5
1
1.5
0 50 100 150 200 250
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 299PHB-Sec23(pg291-336).indd 299 12/20/13 9:07 AM12/20/13 9:07 AM
23-300 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Loaded● 966K ● 966H● 26.5-R25 Tires
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
966K TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
966H TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 300PHB-Sec23(pg291-336).indd 300 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-301
Travel Time — Empty● 966K ● 966H● 26.5-R25 Tires
Wheel LoadersIntegrated Toolcarriers
2%4%
6%
8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
966K TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%4%
6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
966H TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 301PHB-Sec23(pg291-336).indd 301 12/20/13 9:07 AM12/20/13 9:07 AM
23-302 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Loaded and Empty● 972M● 26.5-R25 Tires
2%4%6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
972M TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
972M TRAVEL TIME — EMPTY
2%4%6%
8%10%
15%
20%
0
0.5
1
1.5
0 50 100 150 200 250
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 302PHB-Sec23(pg291-336).indd 302 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-303
Travel Time — Loaded● 972K ● 972H● 26.5-R25 Tires
Wheel LoadersIntegrated Toolcarriers
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
972K TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%
4%6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
972H TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 303PHB-Sec23(pg291-336).indd 303 12/20/13 9:07 AM12/20/13 9:07 AM
23-304 Edition 44
Wheel LoadersIntegrated Toolcarriers
Travel Time — Empty● 972K ● 972H● 26.5-R25 Tires
2%4%
6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
972K TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%4%
6%
8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
972H TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 304PHB-Sec23(pg291-336).indd 304 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-305
Travel Time — Loaded● 980K ● 980H● 29.5-R25 Tires
Wheel LoadersIntegrated Toolcarriers
2%
4%
6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
980K (NO LOCK-UP) TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%
4%
6%
8%
10%
15%
20%
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250
980H TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 305PHB-Sec23(pg291-336).indd 305 12/20/13 9:07 AM12/20/13 9:07 AM
Wheel LoadersIntegrated Toolcarriers
Travel Time — Empty● 980K ● 980H● 29.5-R25 Tires
23-306 Edition 44
2%4%
6%
8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
980K (NO LOCK-UP) TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%4%
6%
8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
980H TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
Not available in all regions. Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 306PHB-Sec23(pg291-336).indd 306 12/20/13 9:07 AM12/20/13 9:07 AM
23
Travel Time — Lock-Up Clutch● 980K
● 29.5-R25 Tires
Wheel LoadersIntegrated Toolcarriers
Edition 44 23-307
2%4%
6%8%10%
15%
20%
0
0.5
1
1.5
2
0 50 100 150 200 250
980K (LOCK-UP CLUTCH) TRAVEL TIME — LOADED
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
2%4%6%
8%
10%
15%
20%
0
0.5
1
1.5
0 50 100 150 200 250
980K (LOCK-UP CLUTCH) TRAVEL TIME — EMPTY
DISTANCE ONE WAY
TIM
E (
MIN
)
Meters
PE
RC
EN
T G
RA
DE
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe.Contact your local Cat dealer for product availability.
Curves assume use of highest operating speed attainable.In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
PHB-Sec23(pg291-336).indd 307PHB-Sec23(pg291-336).indd 307 12/20/13 9:07 AM12/20/13 9:07 AM
0 5 10 15 20 25 30 35 400
50
100
150
200
250
300
350
1F
2F
3F3F
4F
4F
2F
Wheel LoadersIntegrated Toolcarriers
988K Rimpull-Speed-Gradeability● Lock-Up Clutch
23-308 Edition 44
988KR
IMP
ULL
GROUND SPEED
kN
km/h
Direct Drive
PHB-Sec23(pg291-336).indd 308PHB-Sec23(pg291-336).indd 308 12/20/13 9:07 AM12/20/13 9:07 AM
PHB-Sec23(pg291-336).indd 331PHB-Sec23(pg291-336).indd 331 12/20/13 9:07 AM12/20/13 9:07 AM
23-332 Edition 44
Wheel LoadersIntegrated Toolcarriers
Work Tools● Wheel Loaders
Work Tools 904H
908H
2, 9
07H
2, 9
06H
2
914G
2, IT
14G
2
910K
914K
924K
930K
938K
950K
, 962
K
950H
, 962
H
966H
, 966
K, 9
66M
, 972
H, 9
72K
, 972
M
980K
, 980
H
988K
988H
990H
992K
993K
994H
, 994
F
Fusion Quick Coupler X X X X X X
Quick Coupler X X X X X
Performance Series General Purpose Bucket
X X X X X X X X X X X
General Purpose Bucket X X X X X X X
Performance Series Material Handling Bucket
X X X X
Material Handling Bucket X X X X X X
Sand & Gravel Bucket X X X
Performance Series Coal Bucket X X X
Coal Bucket X X X X X X X X X X X
Performance Series Rock Bucket X X X X X X
Rock Bucket X X X X X X X X
Performance Series Heavy Duty Rock Bucket
X X X
Heavy Duty Rock Bucket X X X X
Performance Series Heavy Duty Granite Bucket
X X
Heavy Duty Granite Bucket X X X X
Heavy Abrasion Rock Bucket X X
Iron Ore Bucket X X X X
Serrated Edge Rock Bucket X X X X
Multi-purpose Bucket X X X X X X X X X X X
Side Dump Bucket X X X X X X X X X
High Dump Bucket X X X X X X
Grapple Bucket X X X X X X X X
Waste Handling Bucket X X X X X X X
Woodchip Bucket X X X X X X X X X X
Slag Bucket X X X X
Fertilizer Bucket X X X
Grading Bucket X X X
Light Material Bucket X X X X X X X X
NOTE: List is not all-inclusive. Contact your Cat dealer for special attachment needs.
PHB-Sec23(pg291-336).indd 332PHB-Sec23(pg291-336).indd 332 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-333
Wheel LoadersIntegrated Toolcarriers
23
Work Tools● Wheel Loaders
Work Tools 904H
908H
2, 9
07H
2, 9
06H
2
914G
2, IT
14G
2
910K
914K
924K
930K
938K
950K
, 962
K
950H
, 962
H
966H
, 966
K, 9
66M
, 972
H, 9
72K
, 972
M
980K
, 980
H
988K
988H
990H
992K
993K
994H
, 994
F
Pallet Fork X X X X X X X X X X X X X
Construction Fork X X X
Log & Lumber Fork X X X X X X X X X
Logging Fork X X X X X X
Millyard Fork X X X X X X
Unloading Grapple Fork X X X
Pipe & Pole Fork X X X X X
Asphalt Cutters X X
Auger X X
Blade X X
Angle Broom X X X X X X X X X X
Special Application Broom X X X X X X X X X X
Pickup Broom X X X X X X X X
Cold Planer X X
Compactors X X
Landscape Tillers X X
Material Handling Arm X X X X X X X X X X X X
Rake X X X X X X X X
Reversible Plow X X X X X X X X X X
V-plow X X X X X X X X
Snow Blower X X
Snow Push X X X X X X X
Stump Grinder X X
Trencher X X
Wheel Saw X
Block Handling Tools X X X
NOTE: List is not all-inclusive. Contact your Cat dealer for special attachment needs.
PHB-Sec23(pg291-336).indd 333PHB-Sec23(pg291-336).indd 333 12/20/13 9:07 AM12/20/13 9:07 AM
23-334 Edition 44
Wheel LoadersIntegrated Toolcarriers
BUCKETSPerformance Series — optimized fill factors for use in truck loading, stockpiling and load-and-carry applications.General Purpose — provide good all-around performance for stockpiling, re-handling, excavating and bank loading.Material Handling — designed for efficient loading of stock piled materials.Coal — high-volume material movers, for loading and stock piling coal and other materials of similar density.
Rock — designed for high production in abrasive applications.Multi-Purpose — versatile … loads, strips topsoil, bull-dozes, clamps pipe, and cleans up debris, plus many other tasks.Side Dump — dump forward or to the left … ideal in tight quarters or to reduce turning time.High Dump — for extended dump height of light materials.Grapple — equipped with dual top clamps to grab and hold loose material.Waste Handling — move large volumes for low-density refuse in transfer stations, landfills and recycling yards.Woodchip — optimized for moving large volumes of wood chips.Slag — heavy duty and specifically constructed to handle extreme conditions that come with handling hot slag.
FORKSPallet — for a variety of task, tines are adjustable and available in several different lengths.Log & Lumber — flat tines and raised back are designed specifically for use in handling both unfinished logs and stack lumber. Available with top clamp.Logging — equipped with two independent top clamps, for use loading and unloading trucks and feeding the mill.Millyard — equipped with one-piece top clamp, built for moving, sorting and feeding the mill.Unloading Grapple — short tines and large top clamp opening ideal for unloading logs from trucks.Pipe & Pole — wide carriage, fixed tines and full width double-acting clamp are ideal for transporting, loading and unloading pipe.
AND MORE ...Brooms — for street or job site cleanup, snow removal etc. Angle, Special Application and Pick-up models available.Material Handling Arms — provides a tool that can pick, carry and load a variety of materials. Arm length can be adjusted.Plows — ideal for snow clearing, available in angling and V-plow styles.Rakes — versatile tools that work well in light-duty, medium-duty and heavy-duty land clearing situations. Available with top clamp.
Integrated Toolcarriers Work ToolsWork Tools IT14G2 910K 914KPerformance Series
General Purpose BucketX X
General Purpose Bucket X X XMaterial Handling Bucket X X XCoal BucketMulti-Purpose Bucket X XSide Dump Bucket X XHigh Dump BucketGrapple BucketWaste Handling BucketWoodchip BucketPallet Fork X X XLog & Lumber ForkLogging ForkMillyard ForkGrapple ForkAsphalt CutterStraight BladeAngle Blade X XAngle Broom X XSpecial Application BroomPick-up BroomMaterial Handling Arm X X XReversible PlowV-plowOne Way PlowRakeThis list not all inclusive. Contact your Cat dealer for special attachment needs.
Work Tools
PHB-Sec23(pg291-336).indd 334PHB-Sec23(pg291-336).indd 334 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-335
Fusion Coupler System● NACD, LACD, EAME
Wheel LoadersIntegrated Toolcarriers
FUSION COUPLER SYSTEMCaterpillar is breaking new ground with the Fusion
Coupler System. Caterpillar engineers designed this new system to exceed the performance of any other Cat or competitive coupler solution in the marketplace. This coupler system is a factory- or field-installed option for Cat Loaders from 924K through 972, including IT38 and IT62 machines. Fusion offers benefits in four main categories:
bility with performance virtually identical to pin-on.Imagine lifting a hundred-pound box with your arms
fully extended. Now, imagine lifting that same load close to your body. That’s the genius of Fusion: designed to integrate the work tool and the machine by pulling the coupler and tool closer to the wheel loader. As a result, the center of gravity is moved inward, towards the machine. This translates to increased lifting ability when compared to machines equipped with competing coupler systems.
DurabilityThe advanced wedging mechanism of the Fusion
Coupler creates a tight, rattle-free fit. This new lock up system eliminates play and wear — resulting in a long service life.
Wedges pull the attachment tight to the machine in two directions — in and down. Constant hydraulic pres-sure on the coupler wedges compensate for wear, assur-ing a tight fit throughout the life of the coupler. Tight fit gives better tool control and increased productivity. Plus, coupler durability is substantially increased over tradi-tional couplers.
VisibilityA new, open coupler frame design opens sight lines
from the operator’s seat, making it easier than ever before to engage and disengage attachments with certainty.
Offset tines and other design changes to Fusion Pallet Forks, working in conjunction with the Fusion Coupler, increase visibility substantially at ground level and truck bed height when compared to tradi tional coupler and fork combinations.
Flexibility/CompatibilityWith the Fusion Coupler system, Caterpillar customers
get one common interface. This unique, single interface eliminates the need for many different couplers across the entire range of Cat Small and Medium Wheel Loaders. This expanded machine compatibility not only allows one machine to pick up a range of work tools, but also for one work tool to be used by a host of different machines. Realize the flexibility and opportunity afforded your rental operation, or the improvements to machine and work tool management on your customers’ job sites.
Fusion is supported by a full line of work tools. Just about any work tool available for pin-on is also available, or can be converted, to work with Fusion. For complete information on Fusion work tools available for Cat Loaders 924 through 972, consult Fusion Product Bulletin GEJQ0222.
PHB-Sec23(pg291-336).indd 335PHB-Sec23(pg291-336).indd 335 12/20/13 9:07 AM12/20/13 9:07 AM
Fusion Work Tools 924K
930K
938K
950K
, 962
K
950H
, 962
H
IT62
H/G
966K
/H
972K
/H
Performance Series General Purpose Bucket X X X X X X X
General Purpose Bucket X X X X X
Performance Series Material Handling Bucket X X X X X X
Material Handling Bucket X X X X X
Performance Series Coal Bucket X X
Coal/Light Material Bucket X X X X
Performance Series Rock Bucket X X X
Rock Bucket X X X X
Multi-purpose Bucket X X X X X
Side Dump Bucket X X X X X X X X
High Dump Bucket X X X X X X X X
Grapple Bucket X X X X X X X X
Waste Handling Bucket X X X X X X X X
Woodchip Bucket X X X X X X X X
Pallet Fork X X X X X X X X
Log & Lumber Fork X X X X X X X X
Logging Fork X
Millyard Fork X X X X
Grapple Fork X
Pipe & Pole Fork X X X X X X X
Angle Broom X X X X X
Special Application Broom X X X X X
Pickup Broom X X X
Material Handling Arm X X X X X X X X
Rake X X X X X X X X
Reversible Plow X X X X X X X X
V-plow X X X X
NOTE: This list is not all-inclusive. Contact your Cat dealer for special attachment needs.
23-336 Edition 44
Wheel LoadersIntegrated Toolcarriers
Fusion Coupler System● Work Tools
PHB-Sec23(pg291-336).indd 336PHB-Sec23(pg291-336).indd 336 12/20/13 9:07 AM12/20/13 9:07 AM