WHEEL LOADERS INTEGRATED TOOL CARRIERS - · PDF fileCAT CATERPILLAR ILT OR IT their repectie loo Caterpillar ellow the Power Ede trade dre a well a ... WHEEL LOADERS INTEGRATED TOOL
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
● Automatic Ride Control suspension system. Operator select “on,” “off” or “automatic.”
● Payload control system.
● Optional Fusion coupler system for work tool inter-changeability with pin-on performance. Work tools can interchange across the entire SWL/MWL/IT line.
● Performance Series Buckets — Reduced dig times and better material retention lead to significant productiv-ity and fuel efficiency improvements (910K, 914K, 924K, 930K, 938K, 950H-980H, 950K-980K and 966M-972M).
Listed features may be standard on some models, optional or unavailable on others. Contact your Cat dealer for specific information.
23-2 Edition 44
Wheel LoadersIntegrated Toolcarriers
Features
PHB-Sec23(pg001-174).indd 2PHB-Sec23(pg001-174).indd 2 12/20/13 9:04 AM12/20/13 9:04 AM
MODEL 906H2 907H2 908H2Flywheel Power: Net 52 kW 71 hp 52 kW 71 hp 52 kW 71 hp
Flywheel Power: Gross 55 kW 75 hp 55 kW 75 hp 55 kW 75 hp
Engine Model C3.3B C3.3B C3.3B
Rated Engine RPM 2500 2500 2500
Bore 94 mm 3.7" 94 mm 3.7" 94 mm 3.7"
Stroke 120 mm 4.72" 120 mm 4.72" 120 mm 4.72"
No. Cylinders 4 4 4
Displacement 3.331 L 203.3 in3 3.331 L 203.3 in3 3.331 L 203.3 in3
Speeds Forward: km/h mph km/h mph km/h mph
1st 7 Lo 4 7 Lo 4 7 Lo 4
2nd 20 Hi 12 20 Hi 12 20 Hi 12
Speeds Reverse: km/h mph km/h mph km/h mph
1st 7 Lo 4 7 Lo 4 7 Lo 4
2nd 20 Hi 12 20 Hi 12 20 Hi 12
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds
Raise 5 5 5
Dump 2 2 2
Lower (Empty, Float Down) 4 4 4
Total 11 11 11
Tread Width 1420 mm 4'8" 1420 mm 4'8" 1590 mm 5'2"
Width Over Tires 1820 mm 5'11" 1820 mm 5'11" 1993 mm 78.6"
Ground Clearance 301 mm 12" 301 mm 12" 340 mm 14"
Fuel Tank Capacity 52 L 13.7 U.S. gal 78 L 20.6 U.S. gal 78 L 20.6 U.S. gal
Hydraulic Tank Capacity 59 L 15.5 U.S. gal 59 L 15.5 U.S. gal 59 L 15.5 U.S. gal
Hydraulic System Capacity (includes tank) 70 L 18.5 U.S. gal 70 L 18.5 U.S. gal 70 L 18.5 U.S. gal
NOTE: These models meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards for higher regulated territories. These models meet U.S. EPA Tier 2/EU Stage II emission standards for lesser regulated territories. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 3PHB-Sec23(pg001-174).indd 3 12/20/13 9:04 AM12/20/13 9:04 AM
23-4 Edition 44
Wheel LoadersIntegrated Toolcarriers
Specifications
MODEL 914G2/IT14G2 910K 914KFlywheel Power:
Net 72 kW 98 hp 70 kW 93 hp 70 kW 93 hp
Gross 75 kW 101 hp 72 kW 97 hp 72 kW 97 hp
Maximum Gross Power:
ISO 14396 — 73 kW 98 hp 73 kW 98 hp
ISO 14396 (DIN) — 73 kW 98 hp 73 kW 98 hp
Rated Net Power:
SAE J1349 — 71 kW 95 hp 71 kW 95 hp
ISO 9249/EEC — 72 kW 96 hp 72 kW 96 hp
ISO 9249 (DIN) — 72 kW 96 hp 72 kW 96 hp
Engine Model C4.4 ACERT C3.8 Turbo* C3.8 Turbo*
Rated Engine RPM 2200 2400 2400
Bore 100 mm 3.94" 100 mm 3.94" 100 mm 3.94"
Stroke 127 mm 5.00" 120 mm 4.72" 120 mm 4.72"
No. Cylinders 4 4 4
Displacement 4 L 243 in3 3.8 L 231.8 in3 3.8 L 231.8 in3
Speeds Forward: km/h mph km/h mph km/h mph
1st 9 Lo 5.6 20 Lo 12.0 20 Lo 12.0
2nd 35 Hi 22.0 40 Lo 25.0 40 Lo 25.0
Speeds Reverse: km/h mph km/h mph km/h mph
1st 9 Lo 5.6 20 Lo 12.0 20 Lo 12.0
2nd 34 Hi 21.0 40 Lo 25.0 40 Lo 25.0
Hydraulic Cycle Time, Rated Load in Bucket:
Seconds
Seconds Seconds914G2 IT14G2
Raise 5.6 6.9 5.9 5.3
Dump 2.1 2.5 2.0 1.8
Lower (Empty, Float Down) 3.2 3.1 4.4 4.0
Total 10.9 12.5 12.3 11.1
Tread Width 1.80 m 5'11" 1.80 m 5'11" 1.80 m 5'11"
Width Over Tires 2.26 m 7'5" 2.26 m 7'5" 2.26 m 7'5"
Ground Clearance 456 mm 18" 348 mm 13" 405 mm 15"
Fuel Tank Capacity 150 L 39.6 U.S. gal 150 L 39.6 gal 150 L 39.6 gal
Hydraulic Tank Capacity 70 L 18.5 U.S. gal 60 L 15.9 gal 60 L 15.9 gal
Hydraulic System Capacity (includes tank) 100 L 26.4 U.S. gal 85 L 22.5 gal 85 L 22.5 gal
* The Cat® C3.8 Turbo Electronic engine meets U.S. EPA Tier 4 Interim, EU Stage IIIB, and Japan MLIT Step 4 emission standards for higher regulated territories, and have no offering for lesser regulated territories.
NOTE: The 914G2 and IT14G2 models meet U.S. EPA Tier 3/EU Stage IIIA emission standards for higher regulated territories. The 914G and IT14G models meet U.S. EPA Tier 2/EU Stage II emission standards for lesser regulated territories. Performance of 914G and IT14G models are identical to 914G2 and IT14G2 models.
PHB-Sec23(pg001-174).indd 4PHB-Sec23(pg001-174).indd 4 12/20/13 9:04 AM12/20/13 9:04 AM
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds
Raise 5.4 5.1 5.5
Dump 1.5 1.5 1.5
Lower (Empty, Float Down) 2.6 2.7 2.7
Total 9.5 9.3 9.7
Tread Width 1930 mm 6'3" 1930 mm 6'3" 2065 mm 6'9"
Width Over Tires 2540 mm 8'4" 2540 mm 8'4" 2675 mm 8'9"
Ground Clearance 397 mm 1'3" 397 mm 1'3" 386 mm 1'3"
Fuel Tank Capacity 195 L 51.5 U.S. gal 195 L 51.5 U.S. gal 195 L 51.5 U.S. gal
Hydraulic Tank Capacity 90 L 23.8 U.S. gal 90 L 23.8 U.S. gal 90 L 23.8 U.S. gal
Hydraulic System Capacity (includes tank) 160 L 42.3 U.S. gal 165 L 43.6 U.S. gal 170 L 44.9 U.S. gal
NOTE: Dimensions listed are for a machine configured with general purpose pin on buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
PHB-Sec23(pg001-174).indd 6PHB-Sec23(pg001-174).indd 6 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-7
Wheel LoadersIntegrated Toolcarriers
23
Specifications
MODEL 950K 962K 966MMaximum Engine: Net 157 kW 210 hp 165 kW 222 hp 207 kW 277 hp
Maximum Engine: Gross 173 kW 232 hp 181 kW 243 hp 232 kW 311 hp
Engine Model C7.1 ACERT C7.1 ACERT C9.3 ACERT
Maximum Net Power Engine RPM 1900 1900 1700
Bore 105 mm 4.1" 105 mm 4.1" 115 mm 4.5"
Stroke 135 mm 5.3" 135 mm 5.3" 149 mm 5.9"
No. Cylinders 6 6 6
Displacement 7.01 L 427.8 in3 7.01 L 427.8 in3 9.3 L 568 in3
Speeds Forward: km/h mph km/h mph km/h mph
1st 6.9 4.3 6.9 4.3 6.5 4.0
2nd 12.9 8.0 12.9 8.0 13.0 8.1
3rd 22.7 14.1 22.7 14.1 23.5 14.6
4th 37.9 23.6 37.9 23.6 39.8 24.7
Speeds Reverse: km/h mph km/h mph km/h mph
1st 7.5 4.7 7.5 4.7 7.1 4.4
2nd 14.1 8.8 14.1 8.8 14.4 8.9
3rd 24.8 15.4 24.8 15.4 25.9 16.1
4th 39.8 24.7 39.8 24.7 39.0 24.2
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds
Raise 5.9 5.9 6.1
Dump 1.8 1.8 1.4
Lower (Empty, Float Down) 2.5 2.5 2.8
Total 10.0 10.0 10.3
Tread Width 2.14 m 7'0" 2.14 m 7'0" 2.23 m 7'4"
Width Over Tires 2.79 m 9'2" 2.79 m 9'2" 3.00 m 9'11"
Ground Clearance 397 mm 1'3" 397 mm 1'3" 476 mm 1'7"
Fuel Tank Capacity 314 L 83 U.S. gal 314 L 83 U.S. gal 313 L 82.7 U.S. gal
Hydraulic Tank Capacity 137 L 36 U.S. gal 137 L 36 U.S. gal 125 L 33 U.S. gal
Hydraulic System Capacity (includes tank) 189 L 50 U.S. gal 189 L 50 U.S. gal 200 L 52.8 U.S. gal
NOTE: Net Engine Power is provided according to SAE J1349 and ISO 9249. Gross Engine Power is provided according to SAE J1995. Machines may only be available in certain regions. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 7PHB-Sec23(pg001-174).indd 7 12/20/13 9:04 AM12/20/13 9:04 AM
23-8 Edition 44
Wheel LoadersIntegrated Toolcarriers
Specifications
MODEL 966K 966K XE 972MMaximum Engine: Net 199 kW 267 hp 220 kW 299 hp 224 kW 300 hp
Maximum Engine: Gross 222 kW 296 hp 243 kW 330 hp 251 kW 337 hp
Engine Model C9.3 ACERT C9.3 ACERT C9.3 ACERT
Maximum Net Power Engine RPM 1800 1700 1700
Bore 115 mm 4.5" 115 mm 4.5" 115 mm 4.5"
Stroke 149 mm 5.9" 149 mm 5.9" 149 mm 5.9"
No. Cylinders 6 6 6
Displacement 9.3 L 568 in3 9.3 L 568 in3 9.3 L 568 in3
Speeds Forward: km/h mph km/h mph km/h mph
1st 6.7 4.2 6.7 4.2 6.5 4.0
2nd 12.6 7.8 12.6 7.8 13.0 8.1
3rd 22.4 13.9 22.1 13.7 23.5 14.6
4th 37.4 23.2 40.0 24.9 39.8 24.7
Speeds Reverse: km/h mph km/h mph km/h mph
1st 7.8 4.9 6.7 4.2 7.1 4.4
2nd 13.7 8.5 12.6 7.8 14.4 8.9
3rd 23.5 14.6 28.0 17.4 25.9 16.1
4th 38.5 23.9 — 39.0 24.2
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds
Raise 5.9 5.9 6.6
Dump 1.5 1.5 1.5
Lower (Empty, Float Down) 2.4 2.4 2.8
Total 9.8 9.8 10.9
Tread Width 2.23 m 7'4" 2.23 m 7'4" 2.23 m 7'4"
Width Over Tires 3.01 m 9'11" 3.01 m 9'11" 3.00 m 9'11"
Ground Clearance 475 mm 1'6" 475 mm 1'6" 476 mm 1'7"
Fuel Tank Capacity 381 L 101 U.S. gal 381 L 101 U.S. gal 313 L 82.7 U.S. gal
Hydraulic Tank Capacity 137 L 36 U.S. gal 137 L 36 U.S. gal 125 L 33 U.S. gal
Hydraulic System Capacity (includes tank) 200 L 52 U.S. gal 200 L 52 U.S. gal 200 L 52.8 U.S. gal
NOTE: Net Engine Power is provided according to SAE J1349 and ISO 9249. Gross Engine Power is provided according to SAE J1995. Machines may only be available in certain regions. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 8PHB-Sec23(pg001-174).indd 8 12/20/13 9:04 AM12/20/13 9:04 AM
Displacement 9.3 L 568 in3 12.5 L 762.8 in3 18.1 L 1104.5 in3
Speeds Forward: km/h mph km/h mph km/h mph
1st 7.0 4.4 6.9 4.3 6.5 4.0
2nd 12.5 7.8 12.2 7.6 11.6 7.2
3rd 21.4 13.3 21.3 13.2 20.4 12.7
4th 36.9 22.9 37.2 23.1 34.7 21.6
Speeds Reverse: km/h mph km/h mph km/h mph
1st 8.0 5.0 7.8 4.8 7.5 4.7
2nd 14.3 8.9 13.8 8.6 13.3 8.3
3rd 24.5 15.2 24.2 15.1 23.2 14.4
4th 42.2 26.2 42.4 26.3 —
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds
Raise 5.9 6.4 8.0
Dump 2.0 1.7 2.2
Lower (Empty, Float Down) 2.4 3.3 3.5
Total 10.3 11.4 13.7
Tread Width 2.23 m 7'4" 2.44 m 8'0" 2.59 m 8'6"
Width Over Tires 3.02 m 9'11" 3307 mm 10'9" 3.62 m 11'11"
Ground Clearance 475 mm 1'6" 460 mm 1'6" 556 mm 22"
Fuel Tank Capacity 381 L 101 U.S. gal 447 L 118.1 U.S. gal 712 L 188 U.S. gal
Hydraulic Tank Capacity 137 L 36 U.S. gal 156 L 41 U.S. gal 240 L 63 U.S. gal
Hydraulic System Capacity (includes tank) 200 L 52 U.S. gal 271 L 72 U.S. gal 475 L 125 U.S. gal
* Changes in bucket weight, including field installed wear iron, can impact rated payload. Consult your Cat dealer for assistance in selecting and configuring the proper bucket for the application. The Cat Large Wheel Loader Payload Policy is a guideline intended to maximize wheel loader structural and component life. The Cat Payload Policy is that the “Gross Bucket plus Payload Capacity” is the MAXIMUM weight that should be carried on the end of the Lift Arm/Boom.
NOTE: For 972K and 980K, Net Engine Power is provided according to SAE J1349 and ISO 9249. Gross Engine Power is provided according to SAE J1995.
PHB-Sec23(pg001-174).indd 9PHB-Sec23(pg001-174).indd 9 12/20/13 9:04 AM12/20/13 9:04 AM
23-10 Edition 44
Wheel LoadersIntegrated Toolcarriers
Specifications
MODEL 950 GC 950H 962H 966HMaximum Engine: Net 154 kW 207 hp 147 kW 197 hp 156 kW 209 hp 195 kW 262 hp
Maximum Engine: Gross 171 kW 229 hp 162 kW 217 hp 172 kW 231 hp 211 kW 283 hp
Engine Model C7.1 C7 ACERT C7 ACERT C11 ACERT
Maximum Net Power Engine RPM 2000 1800 1800 1800
Bore 105 mm 4.1" 110 mm 4.3" 110 mm 4.3" 130 mm 5.1"
Stroke 135 mm 5.3" 127 mm 5" 127 mm 5" 140 mm 5.5"
No. Cylinders 6 6 6 6
Displacement 7.01 L 427.8 in3 7.2 L 439 in3 7.2 L 439 in3 11.1 L 677 in3
Speeds Forward: km/h mph km/h mph km/h mph km/h mph
1st 7.0 4.3 6.9 4.3 7.0 4.4 6.7 4.2
2nd 12.5 7.8 12.7 7.9 13.0 8.1 12.6 7.8
3rd 22.0 13.7 22.3 13.9 22.6 14.0 22.1 13.7
4th 34.0 21.1 37.0 23.0 38.0 23.6 37.4 23.2
Speeds Reverse: km/h mph km/h mph km/h mph km/h mph
1st 7.0 4.3 7.6 4.7 7.6 4.7 7.4 4.6
2nd 12.5 7.8 13.9 8.6 13.9 8.6 13.9 8.6
3rd 22.0 13.7 24.5 15.2 24.5 15.2 24.3 15.1
4th — 40.0 24.9 40.0 24.9 37.4 23.2
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds Seconds
Raise 6.1 6.2 6.2 5.9
Dump 1.2 2.0 2.0 1.6
Lower (Empty, Float Down) 3.9 2.5 2.5 2.4
Total 11.2 10.7 10.7 9.9
Tread Width 2.15 m 7'0" 2.14 m 7'0" 2.14 m 7'0" 2.23 m 7'4"
Width Over Tires 2.75 m 9'0" 2.79 m 9'2" 2.79 m 9'2" 3.06 m 9'10"
Ground Clearance 460 mm 1'6" 412 mm 16" 412 mm 16" 434 mm 17"
Fuel Tank Capacity 290 L 77 U.S. gal 264 L 70 U.S. gal 264 L 70 U.S. gal 380 L 100 U.S. gal
Hydraulic Tank Capacity 120 L 32 U.S. gal 110 L 29 U.S. gal 110 L 29 U.S. gal 110 L 29 U.S. gal
Hydraulic System Capacity (includes tank) 190 L 50 U.S. gal 186 L 48.4 U.S. gal 186 L 48.4 U.S. gal 200 L 52 U.S. gal
NOTE: Net Engine Power is provided according to SAE J1349 and ISO 9249. Gross Engine Power is provided according to SAE J1995 for all models except for the 950 GC, which is ISO 14396. Machines may only be available in certain regions. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 10PHB-Sec23(pg001-174).indd 10 12/20/13 9:04 AM12/20/13 9:04 AM
Engine Model C13 ACERT C15 ACERT C15 ACERT C27 ACERT
Maximum Net Power Engine RPM 1800 1800 1800 2000
Bore 130 mm 5.1" 137 mm 5.4" 137 mm 5.4" 137 mm 5.4"
Stroke 157 mm 6.2" 171 mm 6.75" 171 mm 6.75" 152 mm 6"
No. Cylinders 6 6 6 12
Displacement 12.5 L 763 in3 15.2 L 928 in3 15.2 L 928 in3 27.1 L 1666 in3
Speeds Forward: km/h mph km/h mph km/h mph km/h mph
1st 7.2 4.5 6.6 4.1 7.3 5 7.0 4.3
2nd 12.6 7.8 11.8 7.3 12.7 8 12.1 7.5
3rd 21.4 13.3 20.7 12.9 22 14 20.8 13.0
4th 36.9 22.9 36.3 22.6 39 24 —
Speeds Reverse: km/h mph km/h mph km/h mph km/h mph
1st 8.2 5.1 7.6 4.7 7.6 5 7.7 4.8
2nd 14.2 8.8 13.5 8.4 14.1 9 13.4 8.3
3rd 24.3 15.1 23.6 14.7 25 12 22.9 14.2
4th 38.8 24.0 41.5 25.8 — —
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds Seconds
Raise 5.9 6.0 8.5 9.2
Dump 2.1 2.1 3 2.9
Lower (Empty, Float Down) 2.4 3.4 4.3 3.8
Total 10.4 11.5 15.8 15.9
Tread Width 2.23 m 7'4" 2.43 m 8'0" 2.59 m 8'6" 3.1 m 10'2"
Width Over Tires 3.00 m 9'10" 3.18 m 10'5" 3.54 m 11'7" 4.1 m 13'5"
Ground Clearance 434 mm 17" 430 mm 16.9" 459 mm 18" 478 mm 18.8"
Fuel Tank Capacity 380 L 100 U.S. gal 453 L 120 U.S. gal 600 L 159 U.S. gal 1074 L 284 U.S. gal
Hydraulic Tank Capacity 110 L 29 U.S. gal 125 L 33 U.S. gal 130 L 34 U.S. gal 174 L† 46 U.S. gal
Hydraulic System Capacity (includes tank) 200 L 52 U.S. gal 250 L 66 U.S. gal 330 L 87 U.S. gal 435 L† 115 U.S. gal
* Changes in bucket weight, including field installed wear iron, can impact rated payload. Consult your Cat dealer for assistance in selecting and configuring the proper bucket for the application. The Cat Large Wheel Loader Payload Policy is a guideline intended to maximize wheel loader structural and component life. The Cat Payload Policy is that the “Gross Bucket plus Payload Capacity” is the MAXIMUM weight that should be carried on the end of the Lift Arm/Boom.
† 990H has a separate hydraulic system for steering and engine cooling fan. System (including tank) 194 L (51 U.S. gal), tank only 132 L (35 U.S. gal).NOTE: 972H and 980H Net Engine Power is provided according to SAE J1349 and ISO 9249. Gross Engine Power is provided according to SAE J1995. The 972H
and 980H are not available in all regions. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 11PHB-Sec23(pg001-174).indd 11 12/20/13 9:04 AM12/20/13 9:04 AM
23-12 Edition 44
Wheel LoadersIntegrated Toolcarriers
Specifications
MODEL 992K 993K 994HU.S. EPA Tier 1 (Equivalent) Flywheel Power:
Net — — 1092 kW 1463 hpMaximum — — 1176 kW 1577 hp
U.S. EPA Tier 4 Final Flywheel Power: Prefix 880 Prefix Z4DNet 607 kW 814 hp 764 kW 1024 hp —Maximum 671 kW 900 hp 773 kW 1036 hp —
U.S. EPA Tier 2 (Equivalent) Final Flywheel Power: Prefix ZMX Prefix Z4Z
Net 607 kW 814 hp 764 kW 1024 hp —Maximum 676 kW 907 hp 774 kW 1037 hp —
Rated Payload:*STD 21.8 t 24 T 22.7 t 30 T 34.5 t 38 THL, EHL, SHL 19 t 21 T 24.9 t 27.5 T 31.7 t 35 T
Gross Rated Bucket Payload:*STD 33 687 kg 74,265 lb 42 912 kg 94,603 lb 56 710 kg 125,021 lbHL, EHL, SHL 30 138 kg 66,441 lb 40 459 kg 89,195 lb 53 396 kg 117,717 lb
Engine Model C32 ACERT C32 ACERT 3516B HHD EUIEmission LevelRated Engine RPM 1750 1900 1600Bore 145 mm 5.7" 145 mm 5.7" 170 mm 6.7"Stroke 162 mm 6.4" 162 mm 6.4" 215 mm 8.5"No. Cylinders 12 12 16Displacement 32.1 L 1959 in3 32.1 L 1959 in3 78 L 4875 in3
Speeds Forward: km/h mph km/h mph km/h mph1st 7.1 4.4 6.8 4.2 7.7 4.82nd 12.2 7.6 11.9 7.4 13.4 8.33rd 20.6 12.8 20.5 12.7 22.5 14.0
Speeds Reverse: km/h mph km/h mph km/h mph1st 7.4 4.6 7.5 4.7 8.5 5.32nd 13.0 8.1 13.1 8.1 13.2 8.23rd 22.4 13.9 22.5 13.9 24.8 15.4
Hydraulic Cycle Time, Rated Load in Bucket: Seconds Seconds Seconds
Tread Width 3.3 m 10'10" 3.54 m 11'6" 4.1 m 13'5"Width Over Tires 4.5 m 14'9" 4.93 m 16'2" 5.45 m 17'11"Ground Clearance 682 mm 26.8" 721 mm 2'5" 825 mm 32"Fuel Tank Capacity 1610 L 425 U.S. gal 2170 L 573 U.S. gal 3833 L 1013 U.S. galHydraulic Systems:
Lift, Tilt 646 L 171 U.S. gal 755 L 199 U.S. gal 690 L 170 U.S. galTank Only 326 L 86 U.S. gal 553 L 146 U.S. gal 390 L 103 U.S. gal
Steering and Brakes 231 L 61 U.S. gal 227 L 60 U.S. gal 267 L 71 U.S. galTank Only 159 L 42 U.S. gal 185 L 48.9 U.S. gal 208 L 55 U.S. gal
Brake Cooling — — 42 L 11 U.S. galTank Only — — 36 L 9.5 U.S. gal
* Changes in bucket weight, including field installed wear iron, can impact rated payload. Consult your Cat dealer for assistance in selecting and configuring the proper bucket for the application. The Cat Large Wheel Loader Payload Policy is a guideline intended to maximize wheel loader structural and component life. The Cat Payload Policy is that the “Gross Bucket plus Payload Capacity” is the MAXIMUM weight that should be carried on the end of the Lift Arm/Boom.
PHB-Sec23(pg001-174).indd 12PHB-Sec23(pg001-174).indd 12 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-13
Performance Data● 906H2
● Vertical Coupler
Wheel LoadersIntegrated Toolcarriers
Bucket Type General Purpose Multi-Purpose Light Material
*Static tipping load and operating weights shown are with implements, ROPS cab, 12.5-20 tires, full fuel tank, operator and 80 kg (176 lb) counterweight.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
*Static tipping load and operating weights shown are with implements, ROPS cab, 12.5-20 tires, full fuel tank, operator and 80 kg (176 lb) counterweight.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
*Static tipping load and operating weights shown are with implements, ROPS cab, 12.5-20 tires, full fuel tank, operator and 80 kg (176 lb) counterweight.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
*Static tipping load and operating weights shown are with implements, ROPS cab, 12.5-20 tires, full fuel tank, operator and 80 kg (176 lb) counterweight.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
*Static tipping load and operating weights shown are with implements, ROPS cab, 12.5-20 tires, full fuel tank, operator and 80 kg (176 lb) counterweight.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
*Static tipping load and operating weights shown are with implements, ROPS cab, 12.5-20 tires, full fuel tank, operator and 80 kg (176 lb) counterweight.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
*Static tipping load and operating weights shown include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator and 17.5-R25 (L2 equivalent) tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader rating, denoted in the text by (§).
PHB-Sec23(pg001-174).indd 19PHB-Sec23(pg001-174).indd 19 12/20/13 9:04 AM12/20/13 9:04 AM
23-20 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● IT14G2● General Purpose Buckets
Bucket Type General Purpose
Cutting Edge Bolt-on TeethCorner Guard
or Bolt-on EdgeHeaped capacity m3 1.2 1.3
yd3 1.6 1.7Struck capacity m3 1.0 1.1
yd3 1.3 1.4Bucket width mm 2424 2401
ft/in 7'11.4" 7'10.5"Dump clearance at full lift
and 45° dischargemm 2975 2920ft/in 9'9" 9'7"
Reach at 45° discharge and 2130 mm (7'0") clearance
mm 1351 1425ft/in 4'5" 4'8"
Reach at full lift and 45° discharge
mm 757 787ft/in 2'6" 2'7"
Reach with lift arms horizontal and bucket level
mm 2090 2150ft/in 6'10" 7'1"
Digging depth mm 156 175in 6.1 6.9
Overall length mm 6506 6424ft/in 21'4" 21'1"
Overall height with bucket at full raise
mm 4801 4801ft/in 15'9" 15'9"
Loader clearance circle with bucket in carry position
m 10.47 10.4ft/in 34'4" 34'1"
Static tipping load, straight** kg 5637 5541lb 12,400 12,210
Static tipping load, full turn** kg 4882 4792lb 10,760 10,560
Breakout force* kN 82.9 77lb 18,640 17,340
Operating weight** kg 7990 8032lb 17,620 17,770
**Breakout force is measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot in accordance with SAE J732 JUN92.**Operating weight and static tipping load include lubricants, full fuel tank, ROPS cab and 80 kg (176 lb) operator.**— IT14G2 includes high speed version, standard counterweight and 17.5-R25 tires.**Machine stability is affected by the tire size, tire ballast and attachments.
PHB-Sec23(pg001-174).indd 20PHB-Sec23(pg001-174).indd 20 12/20/13 9:04 AM12/20/13 9:04 AM
23
Performance Data● IT14G2
● Pallet Forks ● Material Handling Arm
Wheel LoadersIntegrated Toolcarriers
Edition 44 23-21
Pallet ForksFork tine length mm 1050 1200 1350
ft/in 3'5" 3'11" 4'5"Ground to top of tine clearance mm 3708 3708 3708
ft/in 12'2" 12'2" 12'2"Reach with lift arms
horizontal and forks levelmm 1490 1490 1490ft/in 4'11" 4'11" 4'11"
Overall length mm 6723 6873 7023ft/in 22'1" 22'7" 23'1"
Static tipping load, full turn* kg 3853 3734 3620lb 8490 8230 7980
Operating weight* 4 forward, 3 reverse
kg 7898 7915 7928lb 17,400 17,450 17,480
*Static tipping load and operating weight include lubricants, full fuel tank, ROPS cab and 80 kg (176 lb) operator.*— IT14G2 includes high speed version, standard counterweight and 17.5R25 tires.*Machine stability and operating weight are affected by tire size, tire ballast and other attachments.
NOTE: The rated operating load for a machine with pallet fork is: SAE J1197 FEB91; 50% of full turn static tipping load, or hydraulic/structural limit. CEN 474-3: 60% of full turn static tipping load on rough terrain: 80% of full turn static tipping load on firm and level ground, or the hydraulic/structural limit.
Handling Arm PositionMaterial Handling Arm
Retracted Mid-position ExtendedOperating load — full articulation kg 1370 1076 888
*Static tipping load and operating weight include lubricants, full fuel tank, ROPS cab and 80 kg (176 lb) operator.*— IT14G2 includes high speed version, standard counterweight and 17.5-R25 tires.*Machine stability and operating weight are affected by tire size, tire ballast and other attachments.
NOTE: The rated operating load for a machine with material handling arm is 50% of full turn static tipping load, or the hydraulic/structural limit.
PHB-Sec23(pg001-174).indd 21PHB-Sec23(pg001-174).indd 21 12/20/13 9:04 AM12/20/13 9:04 AM
Bucket Type General PurposePin On IT Quick Coupler ISO Quick Coupler
* Static tipping and operating weights shown are for high-speed version 910K and include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator and 15.5-25 12PR L2 tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 and J742 govern loader rating, denoted in the text by (§).
23-22 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 910K Standard Lift
PHB-Sec23(pg001-174).indd 22PHB-Sec23(pg001-174).indd 22 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-23
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 910K High Lift
Bucket Type General PurposePin On IT Quick Coupler ISO Quick Coupler
* Static tipping and operating weights shown are for high-speed version 910K and include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator and 15.5-25 12PR L2 tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 and J742 govern loader rating, denoted in the text by (§).
PHB-Sec23(pg001-174).indd 23PHB-Sec23(pg001-174).indd 23 12/20/13 9:04 AM12/20/13 9:04 AM
23-24 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 914K Standard Lift
Bucket Type General PurposePin On IT Quick Coupler ISO Quick Coupler
Static tipping load full 40° turn* (§) kg 4780 5509 5415lb 10,537 12,146 11,938
Breakout force (§) — SAE rated kg 7989 7145 6942lb 17,613 15,752 15,304
Operating weight* kg 8073 8408 8404lb 17,798 18,536 18,527
Bucket floor angle at maximum lift and full dump
deg 48 47 47
Front axle weight with bucket level on ground
kg 2777 3003 3008lb 6122 6620 6631
Rear axle weight with bucket level on ground
kg 5301 5411 5401lb 11,687 11,930 11,907
Shipping weight kg 7844 8179 8175lb 17,293 18,031 18,023
* Static tipping and operating weights shown are for high-speed version 914K and include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator and 17.5-R25 (L2 equivalent) tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 and J742 govern loader rating, denoted in the text by (§).
PHB-Sec23(pg001-174).indd 24PHB-Sec23(pg001-174).indd 24 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-25
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type General PurposePin On IT Quick Coupler ISO Quick Coupler
Static tipping load full 40° turn* (§) kg 3902 4417 4356lb 8603 9738 9603
Breakout force (§) — SAE rated kg 8149 7240 7031lb 17,965 15,961 15,501
Operating weight* kg 8111 8446 8442lb 17,882 18,620 18,611
Bucket floor angle at maximum lift and full dump
deg 44 43 43
Front axle weight with bucket level on ground
kg 3021 3285 3290lb 6660 7242 7253
Rear axle weight with bucket level on ground
kg 5095 5167 5157lb 11,232 11,390 11,369
Shipping weight kg 7882 8217 8213lb 17,377 18,115 18,106
* Static tipping and operating weights shown are for high-speed version 914K and include lubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator and 17.5-R25 (L2 equivalent) tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 and J742 govern loader rating, denoted in the text by (§).
Performance Data● 914K High Lift
PHB-Sec23(pg001-174).indd 25PHB-Sec23(pg001-174).indd 25 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 924K Standard Lift Pin On Bucket
PHB-Sec23(pg001-174).indd 26PHB-Sec23(pg001-174).indd 26 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-27
Performance Data● 924K Standard Lift Pin On Bucket
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 27PHB-Sec23(pg001-174).indd 27 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 29PHB-Sec23(pg001-174).indd 29 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 30PHB-Sec23(pg001-174).indd 30 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 924K Standard Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 32PHB-Sec23(pg001-174).indd 32 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 924K Standard Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 33PHB-Sec23(pg001-174).indd 33 12/20/13 9:04 AM12/20/13 9:04 AM
23-34 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 924K Standard Lift Fusion Bucket
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 924K High Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 35PHB-Sec23(pg001-174).indd 35 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 924K High Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 36PHB-Sec23(pg001-174).indd 36 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 38PHB-Sec23(pg001-174).indd 38 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 924K High Lift ISO Bucket
PHB-Sec23(pg001-174).indd 40PHB-Sec23(pg001-174).indd 40 12/20/13 9:04 AM12/20/13 9:04 AM
Construction Forks — FusionFork tine length mm 1524 1829
ft/in 5'0" 6'0"Ground to top of tine clearance mm 3630 3630
ft/in 11'11" 11'11"Reach with lift arms
horizontal and forks levelmm 1627 1627ft/in 5'4" 5'4"
Overall length mm 8298 8603ft/in 27'3" 28'3"
Static tipping load with level arms and forks, straight
kg 5951 5626lb 13,120 12,403
Static tipping load with level arms and forks, full 40° turn
kg 5096 4812lb 11,235 10,609
Operating weight kg 12 911 12 956lb 28,464 28,563
NOTE: Dimensions listed are for a machine configured with work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Performance Data● 924K Standard Lift● Pallet Forks ● Construction Forks
PHB-Sec23(pg001-174).indd 42PHB-Sec23(pg001-174).indd 42 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-43
Wheel LoadersIntegrated Toolcarriers
23
Handling Arm PositionMaterial Handling Arm — Fusion
Retracted Mid-position ExtendedOperating load kg 1903 1614 1401
lb 27,426 27,426 27,426NOTE: Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin
20.5 R25 (L-3) XHA2 tires.
Performance Data● 924K Standard Lift
● Material Handling Arm
PHB-Sec23(pg001-174).indd 43PHB-Sec23(pg001-174).indd 43 12/20/13 9:04 AM12/20/13 9:04 AM
23-44 Edition 44
Wheel LoadersIntegrated Toolcarriers
Pallet Forks — FusionFork tine length mm 1220 1372 1524
ft/in 4'0" 4'6" 5'0"Ground to top of tine clearance mm 4186 4186 4186
ft/in 13'9" 13'9" 13'9"Reach with lift arms
horizontal and forks levelmm 2092 2092 2092ft/in 6'10" 6'10" 6'10"
Overall length mm 8528 8678 8832ft/in 28'0" 28'6" 29'0"
Static tipping load with level arms and forks, straight
kg 5342 5206 5070lb 11,777 11,477 11,177
Static tipping load with level arms and forks, full 40° turn
Construction Forks — FusionFork tine length mm 1524 1829
ft/in 5'0" 6'0"Ground to top of tine clearance mm 4123 4123
ft/in 13'6" 13'6"Reach with lift arms
horizontal and forks levelmm 2150 2150ft/in 7'1" 7'1"
Overall length mm 8936 9241ft/in 29'4" 30'4"
Static tipping load with level arms and forks, straight
kg 4772 4533lb 10,520 9993
Static tipping load with level arms and forks, full 40° turn
kg 4046 3838lb 8920 8461
Operating weight kg 13 210 13 255lb 29,123 29,222
NOTE: Dimensions listed are for a machine configured with work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Performance Data● 924K High Lift● Pallet Forks ● Construction Forks
PHB-Sec23(pg001-174).indd 44PHB-Sec23(pg001-174).indd 44 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-45
Wheel LoadersIntegrated Toolcarriers
23
Handling Arm PositionMaterial Handling Arm — Fusion
Retracted Mid-position ExtendedOperating load kg 1608 1386 1218
lb 27,426 27,426 27,426NOTE: Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin
20.5 R25 (L-3) XHA2 tires.
Performance Data● 924K High Lift
● Material Handling Arm
PHB-Sec23(pg001-174).indd 45PHB-Sec23(pg001-174).indd 45 12/20/13 9:04 AM12/20/13 9:04 AM
23-46 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 930K Standard Lift Pin On Bucket
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 46PHB-Sec23(pg001-174).indd 46 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K Standard Lift Pin On Bucket
PHB-Sec23(pg001-174).indd 47PHB-Sec23(pg001-174).indd 47 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K High Lift Pin On Bucket
PHB-Sec23(pg001-174).indd 49PHB-Sec23(pg001-174).indd 49 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 50PHB-Sec23(pg001-174).indd 50 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 52PHB-Sec23(pg001-174).indd 52 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K Standard Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 53PHB-Sec23(pg001-174).indd 53 12/20/13 9:04 AM12/20/13 9:04 AM
23-54 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 930K Standard Lift Fusion Bucket
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K High Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 55PHB-Sec23(pg001-174).indd 55 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K High Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 56PHB-Sec23(pg001-174).indd 56 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 58PHB-Sec23(pg001-174).indd 58 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-59
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type General PurposeGround Engaging Type Bolt-on TeethRated bucket capacity m3 2.00 2.20 2.40 2.60
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K Standard Lift ISO Bucket
PHB-Sec23(pg001-174).indd 59PHB-Sec23(pg001-174).indd 59 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 61PHB-Sec23(pg001-174).indd 61 12/20/13 9:04 AM12/20/13 9:04 AM
23-62 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Type General PurposeGround Engaging Type Bolt-on TeethRated bucket capacity m3 2.00 2.20 2.40 2.60
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 930K High Lift ISO Bucket
PHB-Sec23(pg001-174).indd 62PHB-Sec23(pg001-174).indd 62 12/20/13 9:04 AM12/20/13 9:04 AM
Construction Forks — FusionFork tine length mm 1524 1829
ft/in 5'0" 6'0"Ground to top of tine clearance mm 3630 3630
ft/in 11'11" 11'11"Reach with lift arms
horizontal and forks levelmm 1627 1627ft/in 5'4" 5'4"
Overall length mm 8305 8610ft/in 27'3" 28'3"
Static tipping load with level arms and forks, straight
kg 6824 6458lb 15,044 14,237
Static tipping load with level arms and forks, full 40° turn
kg 5817 5500lb 12,824 12,125
Operating weight kg 13 829 13 873lb 30,487 30,584
NOTE: Dimensions listed are for a machine configured with work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Performance Data● 930K Standard Lift● Pallet Forks ● Construction Forks
PHB-Sec23(pg001-174).indd 64PHB-Sec23(pg001-174).indd 64 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-65
Wheel LoadersIntegrated Toolcarriers
23
Handling Arm PositionMaterial Handling Arm — Fusion
Retracted Mid-position ExtendedOperating load kg 2158 1830 1589
lb 29,456 29,456 29,456NOTE: Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3)
XHA2 tires.
Performance Data● 930K Standard Lift
● Material Handling Arm
PHB-Sec23(pg001-174).indd 65PHB-Sec23(pg001-174).indd 65 12/20/13 9:04 AM12/20/13 9:04 AM
23-66 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 930K High Lift● Pallet Forks ● Construction Forks
Pallet Forks — FusionFork tine length mm 1220 1370 1524
ft/in 4'0" 4'6" 5'0"Ground to top of tine clearance mm 4286 4286 4286
ft/in 14'1" 14'1" 14'1"Reach with lift arms
horizontal and forks levelmm 2222 2222 2222ft/in 7'3" 7'3" 7'3"
Overall length mm 8689 8839 8993ft/in 28'6" 29'0" 29'6"
Static tipping load with level arms and forks, straight
kg 5830 5687 5546lb 12,826 12,511 12,201
Static tipping load with level arms and forks, full 40° turn
Construction Forks — FusionFork tine length mm 1524 1829
ft/in 5'0" 6'0"Ground to top of tine clearance mm 4223 4223
ft/in 13'10" 13'10"Reach with lift arms
horizontal and forks levelmm 2280 2280ft/in 7'6" 7'6"
Overall length mm 9094 9399ft/in 29'10" 30'10"
Static tipping load with level arms and forks, straight
kg 5241 4991lb 11,554 11,003
Static tipping load with level arms and forks, full 40° turn
kg 4417 4199lb 9738 9257
Operating weight kg 14 076 14 121lb 31,032 31,131
NOTE: Dimensions listed are for a machine configured with work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
PHB-Sec23(pg001-174).indd 66PHB-Sec23(pg001-174).indd 66 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-67
Wheel LoadersIntegrated Toolcarriers
23
Handling Arm PositionMaterial Handling Arm — Fusion
Retracted Mid-position ExtendedOperating load kg 1763 1525 1344
lb 30,003 30,003 30,003NOTE: Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3)
XHA2 tires.
Performance Data● 930K High Lift
● Material Handling Arm
PHB-Sec23(pg001-174).indd 67PHB-Sec23(pg001-174).indd 67 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 938K Standard Lift Pin On Bucket
PHB-Sec23(pg001-174).indd 68PHB-Sec23(pg001-174).indd 68 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-69
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 938K Standard Lift Pin On Bucket
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 70PHB-Sec23(pg001-174).indd 70 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 72PHB-Sec23(pg001-174).indd 72 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-73
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 938K Standard Lift Fusion Bucket
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 938K High Lift Fusion Bucket
PHB-Sec23(pg001-174).indd 74PHB-Sec23(pg001-174).indd 74 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
PHB-Sec23(pg001-174).indd 76PHB-Sec23(pg001-174).indd 76 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-77
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 938K Standard Lift ISO Bucket
Bucket Type General PurposeGround Engaging Type Bolt-on TeethRated bucket capacity m3 2.00 2.20 2.60 2.80
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Performance Data● 938K High Lift ISO Bucket
PHB-Sec23(pg001-174).indd 78PHB-Sec23(pg001-174).indd 78 12/20/13 9:04 AM12/20/13 9:04 AM
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including SAE Standards J732 (APR07) which governs loader ratings.
Construction Forks — FusionFork tine length mm 1524 1829
ft/in 5'0" 6'0"Ground to top of tine clearance mm 3693 3693
ft/in 12'1" 12'1"Reach with lift arms
horizontal and forks levelmm 1675 1675ft/in 5'6" 5'6"
Overall length mm 8366 8671ft/in 27'5" 28'5"
Static tipping load with level arms and forks, straight
kg 7973 7560lb 17,577 16,667
Static tipping load with level arms and forks, full 40° turn
kg 6781 6424lb 14,949 14,162
Operating weight kg 15 767 15 811lb 34,760 34,857
NOTE: Dimensions listed are for a machine configured with work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
PHB-Sec23(pg001-174).indd 80PHB-Sec23(pg001-174).indd 80 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-81
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 938K Standard Lift
● Material Handling Arm
Handling Arm PositionMaterial Handling Arm — Fusion
Retracted Mid-position ExtendedOperating load kg 2511 2134 1855
lb 33,728 33,728 33,728NOTE: Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3)
XHA2 tires.
PHB-Sec23(pg001-174).indd 81PHB-Sec23(pg001-174).indd 81 12/20/13 9:04 AM12/20/13 9:04 AM
23-82 Edition 44
Wheel LoadersIntegrated Toolcarriers
Pallet Forks — FusionFork tine length mm 1220 1370 1524
ft/in 4'0" 4'6" 5'0"Ground to top of tine clearance mm 4339 4339 4339
ft/in 14'3" 14'3" 14'3"Reach with lift arms
horizontal and forks levelmm 1714 1714 1714ft/in 5'7" 5'7" 5'7"
Overall length mm 8695 8845 8999ft/in 28'6" 29'0" 29'6"
Static tipping load with level arms and forks, straight
kg 6937 6772 6608lb 15,293 14,930 14,568
Static tipping load with level arms and forks, full 40° turn
Construction Forks — FusionFork tine length mm 1524 1829
ft/in 5'0" 6'0"Ground to top of tine clearance mm 4274 4274
ft/in 14'0" 14'0"Reach with lift arms
horizontal and forks levelmm 2282 2282ft/in 7'6" 7'6"
Overall length mm 9103 9408ft/in 29'10" 30'10"
Static tipping load with level arms and forks, straight
kg 6286 5995lb 13,858 13,217
Static tipping load with level arms and forks, full 40° turn
kg 5294 5042lb 11,671 11,116
Operating weight kg 16 015 16 060lb 35,307 35,406
NOTE: Dimensions listed are for a machine configured with work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Performance Data● 938K High Lift● Pallet Forks ● Construction Forks
PHB-Sec23(pg001-174).indd 82PHB-Sec23(pg001-174).indd 82 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-83
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 938K High Lift
● Material Handling Arm
Handling Arm PositionMaterial Handling Arm — Fusion
Retracted Mid-position ExtendedOperating load kg 2091 1809 1594
lb 34,277 34,277 34,277NOTE: Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3)
XHA2 tires.
PHB-Sec23(pg001-174).indd 83PHB-Sec23(pg001-174).indd 83 12/20/13 9:04 AM12/20/13 9:04 AM
Wheel LoadersIntegrated Toolcarriers
Performance Data● 924K (LRC) Standard Lift Pin On Bucket
23-84 Edition 44
Bucket Type General Purpose Light MaterialPin On Pin On
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.NOTE: Dimensions listed are for a 924K configured with general purpose buckets, bolt-on cutting edges, standard counterweights, 80 kg (176 lb) operator, and
Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
PHB-Sec23(pg001-174).indd 84PHB-Sec23(pg001-174).indd 84 12/20/13 9:04 AM12/20/13 9:04 AM
23
Performance Data● 924K (LRC) Standard Lift Pin On Bucket
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.NOTE: Dimensions listed are for a 924K configured with general purpose buckets, bolt-on cutting edges, standard counterweights, 80 kg (176 lb) operator, and
Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
PHB-Sec23(pg001-174).indd 86PHB-Sec23(pg001-174).indd 86 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-87
Performance Data● 924K (LRC) Standard Lift Hook On Bucket
PHB-Sec23(pg001-174).indd 87PHB-Sec23(pg001-174).indd 87 12/20/13 9:04 AM12/20/13 9:04 AM
23-88 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 924K (LRC) Standard Lift Fusion● Pallet Forks ● Construction Forks● Material Handling Arm
Pallet Forks Construction ForksFork tine length mm 1220 1524
ft/in 4'0" 5'0"Load center mm 610 762
ft/in 2'0" 2'6"Overall length mm 7840 8263
ft/in 25'8" 27'1"Ground reach mm 891 1009
ft/in 2'11" 3'3"Digging depth mm 47 120
in 1.9" 4.7"Level arm reach mm 1522 1580
ft/in 4'11" 5'2"Full lift reach mm 724 782
ft/in 2'4" 2'6"Level arm clearance mm 1761 1698
ft/in 5'9" 5'6"Full lift clearance mm 3639 3575
ft/in 11'11" 11'8"Overall height mm 4621 4880
ft/in 15'1" 16'0"Tipping load — straight (ISO 14397-1)* kg 6615 5911
lb 14,578 13,028Tipping load — full turn (ISO 14397-1)* kg 5670 5036
lb 12,495 11,099Operating weight kg 12 070 12 404
lb 26,601 27,338Rated load (% of full turn tip):
50% of tip (SAE J1197)**kg 2835 2518lb 6247 5549
Rated load (% of full turn tip):60% of tip — rough terrain (EN474-3)**
kg 3402 3022lb 7497 6659
Rated load (% of full turn tip):80% of tip — firm and level (EN474-3)**
kg 4536 4029lb 9996 8879
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Full compliance to EN474-3 and SAE J1197.NOTE: Dimensions listed are for a machine configured with Fusion forks, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Handling Arm PositionMaterial Handling Arm
Retracted Mid-position ExtendedRated load (50% of full turn tip* SAE J1197) kg 1853 1569 1361
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.NOTE: Dimensions listed are for a 930K configured with general purpose buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and
Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
PHB-Sec23(pg001-174).indd 89PHB-Sec23(pg001-174).indd 89 12/20/13 9:04 AM12/20/13 9:04 AM
Wheel LoadersIntegrated Toolcarriers
Performance Data● 930K (LRC) Standard Lift Pin On Bucket
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.NOTE: Dimensions listed are for a 930K configured with general purpose buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and
Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
PHB-Sec23(pg001-174).indd 91PHB-Sec23(pg001-174).indd 91 12/20/13 9:04 AM12/20/13 9:04 AM
23-92 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 930K (LRC) Standard Lift Hook On Bucket
PHB-Sec23(pg001-174).indd 92PHB-Sec23(pg001-174).indd 92 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-93
Performance Data● 930K (LRC) Standard Lift Fusion
● Pallet Forks ● Construction Forks● Material Handling Arm
Wheel LoadersIntegrated Toolcarriers
Pallet Forks Construction ForksFork tine length mm 1220 1524
ft/in 4'0" 5'0"Load center mm 610 762
ft/in 2'0" 2'6"Overall length mm 7882 8305
ft/in 25'10" 27'2"Ground reach mm 926 1045
ft/in 3'0" 3'5"Digging depth mm 47 120
in 1.9" 4.7"Level arm reach mm 1569 1627
ft/in 5'1" 5'4"Full lift reach mm 767 825
ft/in 2'6" 2'8"Level arm clearance mm 1792 1729
ft/in 5'10" 5'8"Full lift clearance mm 3693 3630
ft/in 12'1" 11'10"Overall height mm 4676 4935
ft/in 15'4" 16'2"Tipping load — straight (ISO 14397-1)* kg 7351 6604
lb 16,201 14,555Tipping load — full turn (ISO 14397-1)* kg 6287 5617
lb 13,856 12,379Operating weight kg 13 166 13 501
lb 29,017 29,756Rated load (% of full turn tip):
50% of tip (SAE J1197)**kg 3144 2808lb 6929 6188
Rated load (% of full turn tip):60% of tip — rough terrain (EN474-3)**
kg 3772 3370lb 8313 7427
Rated load (% of full turn tip):80% of tip — firm and level (EN474-3)**
kg 5030 4494lb 11,086 9904
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Full compliance to EN474-3 and SAE J1197.NOTE: Dimensions listed are for a machine configured with Fusion forks, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Handling Arm PositionMaterial Handling Arm
Retracted Mid-position ExtendedRated load (50% of full turn tip* SAE J1197) kg 2135 1811 1572
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.NOTE: Dimensions listed are for a 938K configured with general purpose buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and
Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.48 bar (65 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
PHB-Sec23(pg001-174).indd 94PHB-Sec23(pg001-174).indd 94 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-95
Performance Data● 938K (LRC) Standard Lift Pin On Bucket
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.NOTE: Dimensions listed are for a 938K configured with general purpose buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and
Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.48 bar (65 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
PHB-Sec23(pg001-174).indd 96PHB-Sec23(pg001-174).indd 96 12/20/13 9:04 AM12/20/13 9:04 AM
23
Performance Data● 938K (LRC) Standard Lift Hook On Bucket
PHB-Sec23(pg001-174).indd 97PHB-Sec23(pg001-174).indd 97 12/20/13 9:04 AM12/20/13 9:04 AM
23-98 Edition 44
Wheel LoadersIntegrated Toolcarriers
Pallet Forks Construction ForksFork tine length mm 1220 1524
ft/in 4'0" 5'0"Load center mm 610 762
ft/in 2'0" 2'6"Overall length mm 7942 8366
ft/in 26'0" 27'5"Ground reach mm 961 1081
ft/in 3'1" 3'6"Digging depth mm 44 119
in 1.7" 4.7"Level arm reach mm 1617 1675
ft/in 5'3" 5'5"Full lift reach mm 814 872
ft/in 2'8" 2'10"Level arm clearance mm 1830 1766
ft/in 6'0" 5'9"Full lift clearance mm 3758 3693
ft/in 12'3" 12'1"Overall height mm 4740 4998
ft/in 15'6" 16'4"Tipping load — straight (ISO 14397-1)* kg 8571 7749
lb 18,890 17,078Tipping load — full turn (ISO 14397-1)* kg 7311 6577
lb 16,113 14,495Operating weight kg 15 056 15 390
lb 33,183 33,919Rated load (% of full turn tip):
50% of tip (SAE J1197)**kg 3655 3288lb 8055 7246
Rated load (% of full turn tip):60% of tip — rough terrain (EN474-3)**
kg 4387 3946lb 9668 8696
Rated load (% of full turn tip):80% of tip — firm and level (EN474-3)**
kg 5849 5261lb 12,891 11,595
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculation and testing.**Full compliance to EN474-3 and SAE J1197.NOTE: Dimensions listed are for a machine configured with Fusion forks, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
Handling Arm PositionMaterial Handling Arm
Retracted Mid-position ExtendedRated load (50% of full turn tip* SAE J1197) kg 2482 2109 1833
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K
PHB-Sec23(pg001-174).indd 99PHB-Sec23(pg001-174).indd 99 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 100PHB-Sec23(pg001-174).indd 100 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-101
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 950K
Bucket Type General Purpose — Pin On Material Handling — Pin On
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 101PHB-Sec23(pg001-174).indd 101 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K
PHB-Sec23(pg001-174).indd 102PHB-Sec23(pg001-174).indd 102 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-103
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type Material Handling — Pin On General Purpose — Fusion QC
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K
PHB-Sec23(pg001-174).indd 103PHB-Sec23(pg001-174).indd 103 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K
PHB-Sec23(pg001-174).indd 104PHB-Sec23(pg001-174).indd 104 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K
PHB-Sec23(pg001-174).indd 105PHB-Sec23(pg001-174).indd 105 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 106PHB-Sec23(pg001-174).indd 106 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K
PHB-Sec23(pg001-174).indd 107PHB-Sec23(pg001-174).indd 107 12/20/13 9:04 AM12/20/13 9:04 AM
23-108 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 950K
Bucket Type Material Handling — Fusion QC High Lift Change in SpecsEdge Type
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 108PHB-Sec23(pg001-174).indd 108 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 950K Power Package
PHB-Sec23(pg001-174).indd 109PHB-Sec23(pg001-174).indd 109 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 110PHB-Sec23(pg001-174).indd 110 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-111
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 950K Power Package
Bucket Type General Purpose — Pin On Material Handling — Pin On
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 111PHB-Sec23(pg001-174).indd 111 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 112PHB-Sec23(pg001-174).indd 112 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-113
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 950K Power Package
Bucket Type Material Handling — Pin On General Purpose — Fusion QC
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 113PHB-Sec23(pg001-174).indd 113 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 114PHB-Sec23(pg001-174).indd 114 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 115PHB-Sec23(pg001-174).indd 115 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 116PHB-Sec23(pg001-174).indd 116 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 117PHB-Sec23(pg001-174).indd 117 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 118PHB-Sec23(pg001-174).indd 118 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 119PHB-Sec23(pg001-174).indd 119 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 120PHB-Sec23(pg001-174).indd 120 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-121
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 962K
Bucket Type General Purpose — Pin On Material Handling — Pin On
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 121PHB-Sec23(pg001-174).indd 121 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 122PHB-Sec23(pg001-174).indd 122 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-123
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 962K
Bucket Type Material Handling — Pin On General Purpose — Fusion QC
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 123PHB-Sec23(pg001-174).indd 123 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 124PHB-Sec23(pg001-174).indd 124 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 125PHB-Sec23(pg001-174).indd 125 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 126PHB-Sec23(pg001-174).indd 126 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 127PHB-Sec23(pg001-174).indd 127 12/20/13 9:04 AM12/20/13 9:04 AM
23-128 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 962K
Bucket Type Material Handling — Fusion QC High Lift Change in SpecsEdge Type
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 128PHB-Sec23(pg001-174).indd 128 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counter-weight, cold start, roading fenders, Product Link, Manual Diff Lock/Open axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Final/Stage IV and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 129PHB-Sec23(pg001-174).indd 129 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counter-weight, cold start, roading fenders, Product Link, Manual Diff Lock/Open axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Final/Stage IV and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 966M
PHB-Sec23(pg001-174).indd 130PHB-Sec23(pg001-174).indd 130 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-131
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type Material Handling/Heavy Duty — Pin On High Lift
** Static tipping loads and operating weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counter-weight, cold start, roading fenders, Product Link, Manual Diff Lock/Open axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Final/Stage IV and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 966M
PHB-Sec23(pg001-174).indd 131PHB-Sec23(pg001-174).indd 131 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 132PHB-Sec23(pg001-174).indd 132 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-133
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 966K
Bucket Type General Purpose — Pin On General Purpose — Fusion QC
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 133PHB-Sec23(pg001-174).indd 133 12/20/13 9:04 AM12/20/13 9:04 AM
23-134 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 966K
Bucket Type General Purpose — Fusion QC Material Handling — Pin On
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 134PHB-Sec23(pg001-174).indd 134 12/20/13 9:04 AM12/20/13 9:04 AM
*** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
*** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 135PHB-Sec23(pg001-174).indd 135 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counter-weight, cold start, roading fenders, Product Link, Manual Diff Lock/Open axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Final/Stage IV and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972M
PHB-Sec23(pg001-174).indd 136PHB-Sec23(pg001-174).indd 136 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-137
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type Material Handling/Standard — Pin On Material Handling/Heavy Duty — Pin On High Lift
** Static tipping loads and operating weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counter-weight, cold start, roading fenders, Product Link, Manual Diff Lock/Open axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Final/Stage IV and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972M
PHB-Sec23(pg001-174).indd 137PHB-Sec23(pg001-174).indd 137 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972K
PHB-Sec23(pg001-174).indd 138PHB-Sec23(pg001-174).indd 138 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-139
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type General Purpose — Pin On General Purpose — Fusion QC
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972K
PHB-Sec23(pg001-174).indd 139PHB-Sec23(pg001-174).indd 139 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972K
PHB-Sec23(pg001-174).indd 140PHB-Sec23(pg001-174).indd 140 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-141
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type General Purpose — Fusion QC Material Handling — Pin On Rock — Pin On***
*** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
*** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972K
PHB-Sec23(pg001-174).indd 141PHB-Sec23(pg001-174).indd 141 12/20/13 9:04 AM12/20/13 9:04 AM
23-142 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Type Rock — Pin On*** Rock — Fusion QC***Coal — Pin On
*** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
*** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972K
PHB-Sec23(pg001-174).indd 142PHB-Sec23(pg001-174).indd 142 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg001-174).indd 143PHB-Sec23(pg001-174).indd 143 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 972K Extended Capacity
PHB-Sec23(pg001-174).indd 144PHB-Sec23(pg001-174).indd 144 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-145
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type General Purpose — Pin On Rock — Pin On***Coal — Pin On High Lift
*** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 29.5R25 XLDD1 L4 Radial tires, full fluids, operator, standard counterweight, standard transmission, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
*** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.*** Rock bucket specifications are given on Michelin 29.5R25 XLDD2 L5 Radial tires.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 980K
PHB-Sec23(pg001-174).indd 145PHB-Sec23(pg001-174).indd 145 12/20/13 9:04 AM12/20/13 9:04 AM
23-146 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Type General Purpose — Pin On Material Handling— Pin On
** Static tipping loads and operating weights shown are based on a machine configuration with Michelin 29.5R25 XLDD1 L4 Radial tires, full fluids, operator, standard counterweight, standard transmission, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
These machines are Tier 4 Interim/Stage IIIB and only available in North America and Europe. Contact your local Cat dealer for product availability.
Performance Data● 980K Aggregate Package
PHB-Sec23(pg001-174).indd 146PHB-Sec23(pg001-174).indd 146 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-147
Wheel LoadersIntegrated Toolcarriers
23
Performance Data● 950 GC
Bucket Type General Purpose — Pin On
Edge TypeBolt-onEdges
Teeth & Segments Teeth
Bolt-onEdges
Teeth & Segments Teeth
Capacity — rated m3 3.10 3.10 2.90 3.30 3.30 3.10Capacity — 110% rated m3 3.41 3.41 3.19 3.63 3.63 3.41Width mm 2927 2994 2994 2927 2994 2994Dump clearance at maximum lift and 45° discharge mm 3050 2933 2933 3012 2893 2893Reach at maximum lift and 45° discharge mm 1262 1374 1374 1292 1403 1403Reach at level lift arm and bucket level mm 2720 2881 2881 2770 2931 2931Digging depth mm 86 86 56 86 86 56Overall length mm 8238 8412 8412 8288 8462 8462Overall height with bucket at maximum lift mm 5519 5519 5519 5693 5693 5693Loader clearance circle with bucket at carry position mm 13 819 13 984 13 984 13 847 14 013 14 013Static tipping load, straight with tire squash* kg 12 178 12 040 12 365 12 082 11 943 12 266Static tipping load, straight without tire squash* kg 12 854 12 714 13 050 12 759 12 619 12 952Static tipping load, articulated with tire squash* kg 10 594 10 455 10 764 10 503 10 363 10 671Static tipping load, articulated without tire squash* kg 11 286 11 147 11 466 11 197 11 057 11 374Breakout force** kN 154 152 167 147 146 160Operating weight* kg 18 631 18 739 18 582 18 676 18 784 18 627Reach @ 2134 mm height, 45° dumped mm 1923 1978 1978 1935 1986 1986Clearance at full raise and dump (on stops) mm 2954 2823 2823 2917 2786 2786Dump angle at full raise and dump (on stops) degrees 52 52 52 52 52 52Front axle load — ground level (unloaded) kg 9285 9499 9209 9373 9588 9296Rear axle load — ground level (unloaded) kg 9346 9240 9373 9303 9196 9331Front axle weight distribution — ground level (unloaded) % 49.84 50.69 49.56 50.19 51.04 49.91
** Static tipping loads and operating weight based on a machine configuration with China conversion arrangement, standard ambient conversion arrangement, open diff axles, triangle TB516 tires, standard counterweight, full fuel load and 75 kg operator.
** Measured 100 mm behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 147PHB-Sec23(pg001-174).indd 147 12/20/13 9:04 AM12/20/13 9:04 AM
23-148 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 950 GC
Bucket Type General Purpose — Pin On
Edge TypeBolt-onEdges
Teeth & Segments Teeth
Bolt-onEdges
Teeth & Segments Teeth
Capacity — rated m3 3.40 3.40 3.20 3.60 3.60 3.40Capacity — 110% rated m3 3.74 3.74 3.52 3.96 3.96 3.74Width mm 2927 2994 2994 2927 2994 2994Dump clearance at maximum lift and 45° discharge mm 2985 2867 2867 2939 2820 2820Reach at maximum lift and 45° discharge mm 1314 1425 1425 1351 1460 1460Reach at level lift arm and bucket level mm 2805 2966 2966 2865 3026 3026Digging depth mm 86 86 56 86 86 56Overall length mm 8323 8497 8497 8383 8557 8557Overall height with bucket at maximum lift mm 5723 5723 5723 5781 5781 5781Loader clearance circle with bucket at carry position mm 13 867 14 034 14 034 13 902 14 069 14 069Static tipping load, straight with tire squash* kg 12 020 11 880 12 198 11 904 11 763 12 084Static tipping load, straight without tire squash* kg 12 699 12 558 12 885 12 584 12 442 12 774Static tipping load, articulated with tire squash* kg 10 444 10 304 10 607 10 333 10 193 10 499Static tipping load, articulated without tire squash* kg 11 140 10 998 11 311 11 031 10 889 11 205Breakout force** kN 143 142 155 137 135 147Operating weight* kg 18 706 18 814 18 657 18 764 18 872 18 715Reach @ 2134 mm height, 45° dumped mm 1945 1994 1994 1958 2003 2003Clearance at full raise and dump (on stops) mm 2891 2760 2760 2846 2716 2716Dump angle at full raise and dump (on stops) degrees 52 52 52 51 51 51Front axle load — ground level (unloaded) kg 9432 9648 9355 9545 9763 9467Rear axle load — ground level (unloaded) kg 9274 9166 9302 9219 9109 9248Front axle weight distribution — ground level (unloaded) % 50.42 51.28 50.14 50.87 51.73 50.58
** Static tipping loads and operating weight based on a machine configuration with China conversion arrangement, standard ambient conversion arrangement, open diff axles, triangle TB516 tires, standard counterweight, full fuel load and 75 kg operator.
** Measured 100 mm behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 148PHB-Sec23(pg001-174).indd 148 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-149
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type General Purpose — Hook OnEdge Type Bolt-on Edges Teeth & Segments TeethCapacity — rated m3 3.10 3.10 2.90Capacity — 110% rated m3 3.41 3.41 3.19Width mm 2927 2994 2994Dump clearance at maximum lift and 45° discharge mm 3008 2891 2891Reach at maximum lift and 45° discharge mm 1299 1410 1410Reach at level lift arm and bucket level mm 2775 2936 2936Digging depth mm 94 94 64Overall length mm 8299 8473 8473Overall height with bucket at maximum lift mm 5662 5662 5662Loader clearance circle with bucket at carry position mm 13 850 14 017 14 017Static tipping load, straight with tire squash* kg 11 577 11 439 11 755Static tipping load, straight without tire squash* kg 12 240 12 101 12 427Static tipping load, articulated with tire squash* kg 10 016 9878 10 179Static tipping load, articulated without tire squash* kg 10 697 10 557 10 868Breakout force** kN 146 145 159Operating weight* kg 19 109 19 217 19 060Reach @ 2134 mm height, 45° dumped mm 1940 1993 1993Clearance at full raise and dump (on stops) mm 2907 2777 2777Dump angle at full raise and dump (on stops) degrees 52 52 52Front axle load — ground level (unloaded) kg 10 028 10 245 9953Rear axle load — ground level (unloaded) kg 9081 8972 9107Front axle weight distribution — ground level (unloaded) % 52.48 53.31 52.22
** Static tipping loads and operating weight based on a machine configuration with China conversion arrangement, standard ambient conversion arrangement, open diff axles, triangle TB516 tires, standard counterweight, full fuel load and 75 kg operator. Hook On Bucket includes Quick Coupler.
** Measured 100 mm behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
Performance Data● 950 GC
PHB-Sec23(pg001-174).indd 149PHB-Sec23(pg001-174).indd 149 12/20/13 9:04 AM12/20/13 9:04 AM
23-150 Edition 44
Wheel LoadersIntegrated Toolcarriers
Bucket Type General Purpose — Pin On High Lift Change in SpecsEdge Type
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Performance Data● 950H
PHB-Sec23(pg001-174).indd 150PHB-Sec23(pg001-174).indd 150 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-151
Wheel LoadersIntegrated Toolcarriers
23
Bucket Type Material Handling — Pin On High Lift Change in SpecsEdge Type
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Performance Data● 950H
PHB-Sec23(pg001-174).indd 151PHB-Sec23(pg001-174).indd 151 12/20/13 9:04 AM12/20/13 9:04 AM
Wheel LoadersIntegrated Toolcarriers
Performance Data● 962H
23-152 Edition 44
Bucket Type General Purpose — Pin On High Lift Change in SpecsEdge Type
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
PHB-Sec23(pg001-174).indd 152PHB-Sec23(pg001-174).indd 152 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-153
Performance Data● 962H
Wheel LoadersIntegrated Toolcarriers
Bucket Type Material Handling — Pin On High Lift Change in SpecsEdge Type
** Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
PHB-Sec23(pg001-174).indd 153PHB-Sec23(pg001-174).indd 153 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolants, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 154PHB-Sec23(pg001-174).indd 154 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-155
Performance Data● 966H
Wheel LoadersIntegrated Toolcarriers
Bucket Type Rock — Pin On Material Handling/Standard — Pin On High Lift
** Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolants, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 155PHB-Sec23(pg001-174).indd 155 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolants, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 156PHB-Sec23(pg001-174).indd 156 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-157
Performance Data● 972H
Wheel LoadersIntegrated Toolcarriers
Bucket Type Rock — Pin On Material Handling/Standard — Pin On High Lift
** Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolants, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 157PHB-Sec23(pg001-174).indd 157 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on standard machine configuration with 29.5R25, L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolant, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 158PHB-Sec23(pg001-174).indd 158 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on standard machine configuration with 29.5R25, L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolant, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
PHB-Sec23(pg001-174).indd 159PHB-Sec23(pg001-174).indd 159 12/20/13 9:04 AM12/20/13 9:04 AM
** Static tipping loads and operating weights shown are based on standard machine configuration with 29.5R25, L3 Michelin XHA2 radial tires, power train guard, full fuel tank, coolant, lubricants, air conditioner and operator.
Static tipping loads conform to the international standard as defined in ISO 14397-1 (SEPT2007).** Measured 100 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 (APR2007).
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732 (APR2007) which governs loader ratings.
NOTE: Bucket availability varies by region. Consult your local dealer for availability.
Wheel LoadersIntegrated Toolcarriers
Performance Data● 980H
23-160 Edition 44
PHB-Sec23(pg001-174).indd 160PHB-Sec23(pg001-174).indd 160 12/20/13 9:04 AM12/20/13 9:04 AM
23
Standard Lift High LiftBucket Type Rock Rock Rock Rock Rock Rock
Ground Engaging ToolsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade Spade Spade Spade Spade SpadeBucket Part Number 369-2020 369-2030 369-2040 369-2020 369-2030 369-2040Capacity — struck m3 4.4 4.8 5.1 4.4 4.8 5.1
***Tipping loads were calculated within guidelines of ISO 14397-1:2007 to include tire squash (Tire pressure at 683 kPa [99 psi]). ***Tipping load is calculated without tire squash. ***Static tipping load and operating weight shown are based on standard machine configurations with a fuel tank, coolant, lubricants, and operator.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society for Automotive Engineers. SAE Standards J732C govern loader ratings and are denoted in the text by (§).
PHB-Sec23(pg001-174).indd 166PHB-Sec23(pg001-174).indd 166 12/20/13 9:04 AM12/20/13 9:04 AM
***Tipping loads were calculated within guidelines of ISO 14397-1:2007 to include tire squash (Tire pressure at 683 kPa [99 psi]). ***Tipping load is calculated without tire squash. ***Static tipping load and operating weight shown are based on standard machine configurations with a fuel tank, coolant, lubricants, and operator.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society for Automotive Engineers. SAE Standards J732C govern loader ratings and are denoted in the text by (§).
PHB-Sec23(pg001-174).indd 167PHB-Sec23(pg001-174).indd 167 12/20/13 9:04 AM12/20/13 9:04 AM
Wheel LoadersIntegrated Toolcarriers
Performance Data● 993K
23-168 Edition 44
993K STD Tires: 50/65-51 Part No. 311-1938 SLR:1461 mmBucket Type Rock CoalGround Engaging Tools Teeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade Spade Spade Spade Spade Spade StraightBucket Part Number — group level 303-3270 303-3310 303-3260 303-3330 303-3280 303-3290 310-8990Bucket load at rated capacity kg 27 216 27 216 27 216 27 216 27 216 27 216 27 216
***Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE Standards specifies the cutting edge.***Static tipping load and operating weight shown are based on standard machine configuration with 50/65-51 tires, full fuel tank, coolant and lubricants.***Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 JUN92.**#Tipping load is calculated without tire squash.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader ratings denoted in text by (§).
PHB-Sec23(pg001-174).indd 168PHB-Sec23(pg001-174).indd 168 12/20/13 9:04 AM12/20/13 9:04 AM
23
Performance Data● 993K
Wheel LoadersIntegrated Toolcarriers
Edition 44 23-169
993K HL Tires: 50/65-51 Part No. 311-1938 SLR:1461 mmBucket Type Rock Coal
Ground Engaging ToolsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade Spade Spade Spade Spade Spade StraightBucket Part Number — group level 303-3270 303-3310 303-3260 303-3330 303-3280 303-3290 310-8990Bucket load at rated capacity kg 24 948 24 948 24 948 24 948 24 948 24 948 24 948
***Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE Standards specifies the cutting edge.***Static tipping load and operating weight shown are based on standard machine configuration with 50/65-51 tires, full fuel tank, coolant and lubricants.***Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 JUN92.**#Tipping load is calculated without tire squash.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader ratings denoted in text by (§).
PHB-Sec23(pg001-174).indd 169PHB-Sec23(pg001-174).indd 169 12/20/13 9:04 AM12/20/13 9:04 AM
23-170 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 993K
993K Performance Conversion Table Based on Tire Selection50/65-51 (311-1938) 50/65R51 (311-2443) 50/65-51 (322-9665) 50/65R51 (311-2445)
Dump clearance at full lift and 45° discharge mm ft
0 –51 0 –200 0 0 0
Reach at full lift and 45° discharge mm ft
0 0 0 –20 0 0 0
Reach with lift arms horizontal and bucket level mm ft
0 0 0 –20 0 0 0
Digging depth mm ft
0 51 0 200 0 0 0
Overall length mm ft
0 41 0 160 0 0 0
Overall height with bucket at full raise mm ft
0 –51 0 –200 0 0 0
Total width (width over tires) mm ft
0 18 0 130 0 0 0
Static tipping load straight (no tire squash) kg lb
0 0 0 –5830 0 0 –1285
Static tipping load straight (with tire squash) kg lb
***Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE Standards specifies the cutting edge. ***Static tipping load and operating weight shown are based on standard machine configuration with 53.5/85-57 tires, full fuel tank, coolant and lubricants. ***Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 JUN92. **#Tipping load is calculated without tire squash.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader ratings denoted in text by (§).
PHB-Sec23(pg001-174).indd 171PHB-Sec23(pg001-174).indd 171 12/20/13 9:04 AM12/20/13 9:04 AM
23-172 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 994H
994H HL Bucket Type Rock Coal
Ground Engaging ToolsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade Spade Spade Spade Spade StraightBucket Part Number — group level 257-3682 257-3684 257-3686 251-4560 257-3690 257-3692Bucket load at rated capacity kg 31 752 31 752 31 752 31 752 31 752 31 752
***Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE Standards specifies the cutting edge.***Static tipping load and operating weight shown are based on standard machine configuration with 58/85-57 tires, full fuel tank, coolant and lubricants.***Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 JUN92.**#Tipping load is calculated without tire squash.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader ratings denoted in text by (§).
PHB-Sec23(pg001-174).indd 172PHB-Sec23(pg001-174).indd 172 12/20/13 9:04 AM12/20/13 9:04 AM
23
Edition 44 23-173
Performance Data● 994H
Wheel LoadersIntegrated Toolcarriers
994H EHL Bucket Type Rock Coal
Ground Engaging ToolsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsCutting Edge Type Spade Spade Spade Spade Spade StraightBucket Part Number — group level 257-3682 257-3684 257-3686 251-4560 257-3690 257-3692Bucket load at rated capacity kg 31 752 31 752 31 752 31 752 31 752 31 752
***Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE Standards specifies the cutting edge.***Static tipping load and operating weight shown are based on standard machine configuration with 58/85-57 tires, full fuel tank, coolant and lubricants.***Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 JUN92. **#Tipping load is calculated without tire squash.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader ratings denoted in text by (§).
PHB-Sec23(pg001-174).indd 173PHB-Sec23(pg001-174).indd 173 12/20/13 9:04 AM12/20/13 9:04 AM
23-174 Edition 44
Wheel LoadersIntegrated Toolcarriers
Performance Data● 994H
994H SHL Bucket Type Rock Coal
Ground Engaging ToolsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
SegmentsTeeth &
Segments SerratedCutting Edge Type Spade Spade Spade Spade Spade SpadeBucket Part Number — group level 257-3682 257-3684 257-3686 251-4560 257-3690 241-9682Bucket load at rated capacity kg 31 752 31 752 31 752 31 752 31 752 31 752
***Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE Standards specifies the cutting edge.***Static tipping load and operating weight shown are based on standard machine configuration with 58/85-57 tires, full fuel tank, coolant and lubricants.***Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732 JUN92.**#Tipping load is calculated without tire squash.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742 FEB85 govern loader ratings denoted in text by (§).
PHB-Sec23(pg001-174).indd 174PHB-Sec23(pg001-174).indd 174 12/20/13 9:04 AM12/20/13 9:04 AM
Edition 44 23-175
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● 906H2, 907H2, 908H2
● Vertical Coupler
Dimensions shown represent standard machine with General Purpose bucket (bolt-on cutting edge) and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
A Height to top of stack 2007 mm 6'7" 2007 mm 6'7" 2131 mm 7'0"B Height to top of engine compartment 1645 mm 5'5" 1645 mm 5'5" 1710 mm 5'7"C Height to top of ROPS 2463 mm 8'1" 2586 mm 8'6" 2650 mm 8'8"D Hinge pin height at carry position 114 mm 4" 114 mm 4" 181 mm 7"
◆ E Dump clearance at full lift and 45° discharge angle 2359 mm 7'9" 2359 mm 7'9" 2620 mm 8'7"
F Hinge pin height at full lift 3227 mm 10'7" 3227 mm 10'7" 3410 mm 11'2"◆ G Maximum overall height 4246 mm 13'11" 4246 mm 13'11" 4400 mm 14'5"◆ H Maximum digging depth 107 mm 4" 107 mm 4" 101 mm 4"
J Machine center point to axle 1085 mm 3'7" 1085 mm 3'7" 1085 mm 3'7"K Wheel base 2170 mm 7'1" 2170 mm 7'1" 2170 mm 7'1"L Free radius of tire 513 mm 1'8" 513 mm 1'8" 547 mm 1'10"
◆ M Maximum overall length 5620 mm 18'5" 5620 mm 18'5" 5630 mm 18'6"◆ N Reach at full lift 820 mm 2'8" 820 mm 2'8" 866 mm 2'10"
O Maximum rollback at maximum lift 52° 52° 49°P Maximum rollback at carry height 52° 52° 52°Q Maximum rollback at ground 47° 47° 47°
Ground clearance (std. tires) 301 mm 12" 301 mm 12" 340 mm 13"Tread width (std. tires) 400 mm 1'4" 400 mm 1'4" 403 mm 1'4"Width over tires (std. tires) 1820 mm 6'0" 1820 mm 6'0" 1993 mm 6'6"Tires used for measurements 405/70 R18 405/70 R18 405/70 R20
PHB-Sec23(pg175-290).indd 175PHB-Sec23(pg175-290).indd 175 12/20/13 9:06 AM12/20/13 9:06 AM
A Height to top of stack 2007 mm 6'7" 2007 mm 6'7" 2131 mm 7'0" 2.26 m 7'5"B Height to top of engine
compartment 1645 mm 5'5" 1645 mm 5'5" 1710 mm 5'7" 2.08 m 6'10"C Height to top of ROPS 2463 mm 8'1" 2586 mm 8'6" 2650 mm 8'8" 3.1 m 10'2"D Hinge pin height at carry position 114 mm 4" 114 mm 4" 181 mm 7" 374 mm 15"
◆ E Dump clearance at full lift and 45° discharge angle 2478 mm 8'2" 2478 mm 8'2" 2620 mm 8'7" 2.66 m 8'9"
F Hinge pin height at full lift 3227 mm 10'7" 3227 mm 10'7" 3410 mm 11'2" 3.44 m 11'3"◆ G Maximum overall height 4140 mm 13'7" 4140 mm 13'7" 4296 mm 14'1" 4.39 m 14'5"◆ H Maximum digging depth 95 mm 4" 95 mm 4" 101 mm 4" 89 mm 3.5"
J Machine center point to axle 1085 mm 3'7" 1085 mm 3'7" 1085 mm 3'7" 1.3 m 4'3"K Wheel base 2170 mm 7'1" 2170 mm 7'1" 2170 mm 7'1" 2.6 m 8'6"L Free radius of tire 513 mm 1'8" 513 mm 1'8" 547 mm 1'10" 670 mm 26"
◆ M Maximum overall length 5469 mm 17'11" 5469 mm 17'11" 5630 mm 18'6" 6.23 m 20'5"◆ N Reach at full lift 725 mm 2'5" 725 mm 2'5" 770 mm 2'6" 973 mm 3'2"
O Maximum rollback at maximum lift 52° 52° 49° 60°P Maximum rollback at carry height 52° 52° 52° 46°Q Maximum rollback at ground 47° 47° 47° 41°
Ground clearance (std. tires) 301 mm 12" 301 mm 12" 340 mm 13" 456 mm 18"Tread width (std. tires) 400 mm 1'4" 400 mm 1'4" 403 mm 1'4" 1.8 m 5'10.9"Width over tires (std. tires) 1820 mm 6'0" 1820 mm 6'0" 1993 mm 6'6" 2.26 m 7'4.9"Tires used for measurements 405/70 R18 405/70 R18 405/70 R20 17.5-R25 (L-2)
PHB-Sec23(pg175-290).indd 176PHB-Sec23(pg175-290).indd 176 12/20/13 9:07 AM12/20/13 9:07 AM
23
Machine Dimensions● 910K
Wheel LoadersIntegrated Toolcarriers
Edition 44 23-177
All dimensions are approximate.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
910K 910K 910KStandard Lift and
Pin On BucketHigh Lift and
Pin On BucketStandard Lift and IT Quick Coupler
A Height to top of cab 3020 mm 119" 3020 mm 119" 3020 mm 119"B Height to top of exhaust stack 2990 mm 118" 2990 mm 118" 2990 mm 118"C Height to top of rear hood 2100 mm 83" 2100 mm 83" 2100 mm 83"D Ground clearance to frame 348 mm 14" 348 mm 14" 348 mm 14"E Rear axle centerline to rearmost point 1590 mm 63" 1615 mm 64" 1590 mm 63"F Hitch centerline to front axle 1300 mm 51" 1300 mm 51" 1300 mm 51"G Wheelbase 2600 mm 102" 2600 mm 102" 2600 mm 102"H Bucket pin height at ground 254 mm 10" 254 mm 10" 256 mm 10"
Rackback angle at ground 40° 44° 40°Bucket pin height at carry position 319 mm 13" 480 mm 19" 319 mm 13"Rackback angle at carry 42° 50° 42°Departure angle 33° 33° 33°
J Clearance with bucket level at maximum lift 3419 mm 135" 3775 mm 149" 3418 mm 135"K Bucket pin height at maximum lift 3673 mm 145" 4030 mm 159" 3673 mm 145"
Maximum dump angle at maximum lift 47° 43° 48°
PHB-Sec23(pg175-290).indd 177PHB-Sec23(pg175-290).indd 177 12/20/13 9:07 AM12/20/13 9:07 AM
23-178 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 910K
All dimensions are approximate.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
910K 910K 910KHigh Lift and
IT Quick CouplerStandard Lift and ISO Quick Coupler
High Lift and ISO Quick Coupler
A Height to top of cab 3020 mm 119" 3020 mm 119" 3020 mm 119"B Height to top of exhaust stack 2990 mm 118" 2990 mm 118" 2990 mm 118"C Height to top of rear hood 2100 mm 83" 2100 mm 83" 2100 mm 83"D Ground clearance to frame 348 mm 14" 348 mm 14" 348 mm 14"E Rear axle centerline to rearmost point 1615 mm 64" 1590 mm 63" 1615 mm 64"F Hitch centerline to front axle 1300 mm 51" 1300 mm 51" 1300 mm 51"G Wheelbase 2600 mm 102" 2600 mm 102" 2600 mm 102"H Bucket pin height at ground 256 mm 10" 255 mm 10" 255 mm 10"
Rackback angle at ground 44° 41° 44°Bucket pin height at carry position 480 mm 19" 317 mm 12" 448 mm 18"Rackback angle at carry 50° 43° 49°Departure angle 33° 33° 33°
J Clearance with bucket level at maximum lift 3774 mm 149" 3418 mm 135" 3774 mm 149"K Bucket pin height at maximum lift 4030 mm 159" 3673 mm 145" 4030 mm 159"
Maximum dump angle at maximum lift 44° 48° 44°
PHB-Sec23(pg175-290).indd 178PHB-Sec23(pg175-290).indd 178 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-179
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● 914K
All dimensions are approximate.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
914K 914K 914KStandard Lift and
Pin On BucketHigh Lift and
Pin On BucketStandard Lift and IT Quick Coupler
A Height to top of cab 3060 mm 120" 3060 mm 120" 3060 mm 120"B Height to top of exhaust stack 3030 mm 119" 3030 mm 119" 3030 mm 119"C Height to top of rear hood 2140 mm 84" 2140 mm 84" 2140 mm 84"D Ground clearance to frame 388 mm 15" 388 mm 15" 388 mm 15"E Rear axle centerline to rearmost point 1615 mm 64" 1615 mm 64" 1615 mm 64"F Hitch centerline to front axle 1300 mm 51" 1300 mm 51" 1300 mm 51"G Wheelbase 2600 mm 102" 2600 mm 102" 2600 mm 102"H Bucket pin height at ground 254 mm 10" 254 mm 10" 255 mm 10"
Rackback angle at ground 39° 43° 39°Bucket pin height at carry position 314 mm 12" 479 mm 19" 314 mm 12"Rackback angle at carry 41° 49° 41°Departure angle 33° 33° 33°
J Clearance with bucket level at maximum lift 3459 mm 136" 3815 mm 150" 3458 mm 136"K Bucket pin height at maximum lift 3713 mm 146" 4070 mm 160" 3713 mm 146"
Maximum dump angle at maximum lift 47° 43° 47°
PHB-Sec23(pg175-290).indd 179PHB-Sec23(pg175-290).indd 179 12/20/13 9:07 AM12/20/13 9:07 AM
23-180 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 914K
All dimensions are approximate.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
914K 914K 914KHigh Lift and
IT Quick CouplerStandard Lift and ISO Quick Coupler
High Lift and ISO Quick Coupler
A Height to top of cab 3060 mm 120" 3060 mm 120" 3060 mm 120"B Height to top of exhaust stack 3030 mm 119" 3030 mm 119" 3030 mm 119"C Height to top of rear hood 2140 mm 84" 2140 mm 84" 2140 mm 84"D Ground clearance to frame 388 mm 15" 388 mm 15" 388 mm 15"E Rear axle centerline to rearmost point 1615 mm 64" 1615 mm 64" 1615 mm 64"F Hitch centerline to front axle 1300 mm 51" 1300 mm 51" 1300 mm 51"G Wheelbase 2600 mm 102" 2600 mm 102" 2600 mm 102"H Bucket pin height at ground 255 mm 10" 255 mm 10" 255 mm 10"
Rackback angle at ground 43° 39° 43°Bucket pin height at carry position 479 mm 19" 318 mm 13" 451 mm 18"Rackback angle at carry 49° 41° 48°Departure angle 33° 33° 33°
J Clearance with bucket level at maximum lift 3814 mm 150" 3458 mm 136" 3814 mm 150"K Bucket pin height at maximum lift 4070 mm 160" 3713 mm 146" 4070 mm 160"
Maximum dump angle at maximum lift 43° 47° 43°
PHB-Sec23(pg175-290).indd 180PHB-Sec23(pg175-290).indd 180 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-181
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● 924K, 930K
Dimensions listed are for a machine configured with pin on general purpose bucket, bolt-on cutting edge, standard counterweight (924K), heavy counterweight (930K), additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL924K 924K 930K
Standard High Lift StandardBucket 1.9 m3 2.5 yd3 1.9 m3 2.5 yd3 2.1 m3 2.8 yd3
A Maximum overall length 7451 mm 24'5" 8093 mm 26'7" 7530 mm 24'8"B Wheel base 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10"C Machine center point to front axle 1500 mm 4'11" 1500 mm 4'11" 1500 mm 4'11"D Rear axle to counterweight 1986 mm 6'6" 1986 mm 6'6" 1993 mm 6'6"E Ground clearance 400 mm 1'4" 400 mm 1'4" 400 mm 1'4"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS 3340 mm 10'11" 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7" 3223 mm 10'7"J Tire Radius (empty machine) 685 mm 2'3" 685 mm 2'3" 685 mm 2'3"K Maximum digging depth (bucket level) 100 mm 4" 135 mm 5" 100 mm 4"L Maximum rollback at carry height 45° 49° 45°M Dump clearance at full lift and
45° discharge angle 2912 mm 9'7" 3405 mm 11'2" 2855 mm 9'4"N Hinge pin height at carry position 458 mm 1'6" 649 mm 2'2" 458 mm 1'6"O Reach at full lift and 45° dump 992 mm 3'3" 1229 mm 4'0" 1033 mm 3'5"P Clearance level bucket at full height 3580 mm 11'9" 4073 mm 13'4" 3580 mm 11'9"Q Maximum hinge pin height 3907 mm 12'10" 4400 mm 14'5" 3907 mm 12'10"R Maximum overall height 5052 mm 16'7" 5545 mm 18'2" 5122 mm 16'10"S Full dump at maximum lift 50° 49° 49°T Maximum roll back at maximum lift 54° 51° 54°
PHB-Sec23(pg175-290).indd 181PHB-Sec23(pg175-290).indd 181 12/20/13 9:07 AM12/20/13 9:07 AM
23-182 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 930K, 938K
Dimensions listed are for a machine configured with pin on general purpose bucket, bolt-on cutting edge, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL930K 938K 938K
High Lift Standard High LiftBucket 2.1 m3 2.8 yd3 2.5 m3 3.3 yd3 2.5 m3 3.3 yd3
A Maximum overall length 8324 mm 27'4" 7656 mm 25'1" 8397 mm 27'7"B Wheel base 3000 mm 9'10" 3050 mm 10'0" 3050 mm 10'0"C Machine center point to front axle 1500 mm 4'11" 1525 mm 5'0" 1525 mm 5'0"D Rear axle to counterweight 1993 mm 6'6" 1968 mm 6'5" 1968 mm 6'5"E Ground clearance 400 mm 1'4" 390 mm 1'3" 390 mm 1'3"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS 3340 mm 10'11" 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7" 3223 mm 10'7"J Tire Radius (empty machine) 685 mm 2'3" 685 mm 2'3" 685 mm 2'3"K Maximum digging depth (bucket level) 135 mm 5" 100 mm 4" 135 mm 5"L Maximum rollback at carry height 50° 45° 50°M Dump clearance at full lift and
45° discharge angle 3448 mm 11'4" 2869 mm 9'5" 3450 mm 11'4"N Hinge pin height at carry position 692 mm 2'3" 467 mm 1'6" 686 mm 2'3"O Reach at full lift and 45° dump 1353 mm 4'5" 1108 mm 3'8" 1374 mm 4'6"P Clearance level bucket at full height 4073 mm 13'4" 3462 mm 11'4" 4223 mm 13'10"Q Maximum hinge pin height 4500 mm 14'9" 3969 mm 13'0" 4550 mm 14'11"R Maximum overall height 5715 mm 18'9" 5242 mm 17'2" 5823 mm 19'1"S Full dump at maximum lift 48° 49° 47°T Maximum roll back at maximum lift 53° 54° 53°
PHB-Sec23(pg175-290).indd 182PHB-Sec23(pg175-290).indd 182 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-183
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● 924K (LRC), 930K (LRC)
Dimensions listed are for a machine configured with general purpose pin on buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL924K (LRC) 930K (LRC) 930K (LRC)
Standard Standard High LiftBucket 1.9 m3 2.5 yd3 2.5 m3 2.7 yd3 2.5 m3 2.7 yd3
A Maximum overall length* 7374 mm 24'2" 7488 mm 24'6" 8282 mm 27'2"B Wheel base 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10"C Machine center point to front axle 1500 mm 4'11" 1500 mm 4'11" 1500 mm 4'11"D Rear axle to counterweight 1986 mm 6'6" 1993 mm 6'6" 1993 mm 6'6"E Ground clearance** 397 mm 1'3" 397 mm 1'3" 397 mm 1'3"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS** 3340 mm 10'11" 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7" 3223 mm 10'7"J Tire Radius (empty machine)** 685 mm 2'2" 685 mm 2'2" 685 mm 2'2"K Maximum digging depth (bucket level)** 100 mm 3.9" 100 mm 3.9" 135 mm 5.3"L Maximum rollback at carry height 43° 45° 51°M Dump clearance at full lift and
45° discharge angle* 2857 mm 9'4" 2855 mm 9'4" 3448 mm 11'3"N Hinge pin height at carry position 447 mm 1'5" 458 mm 1'6" 692 mm 2'3"O Reach at full lift and 45° dump* 950 mm 3'1" 1033 mm 3'4" 1353 mm 4'5"P Clearance level bucket at full height** 3526 mm 11'6" 3580 mm 11'8" 4173 mm 13'8"Q Maximum hinge pin height** 3853 mm 12'7" 3907 mm 12'9" 4500 mm 14'9"R Maximum overall height** 4997 mm 16'4" 5122 mm 16'9" 5715 mm 18'8"S Full dump at maximum lift 50° 49° 48°T Maximum roll back at maximum lift 53° 54° 53°
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2 *Varies with bucket.**Varies with tires.
PHB-Sec23(pg175-290).indd 183PHB-Sec23(pg175-290).indd 183 12/20/13 9:07 AM12/20/13 9:07 AM
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 938K (LRC)
23-184 Edition 44
Dimensions listed are for a machine configured with general purpose pin on buckets, bolt-on cutting edges, optional counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL938K (LRC) 938K (LRC)
Standard High LiftBucket 2.5 m3 3.3 yd3 2.5 m3 3.3 yd3
A Maximum overall length* 7604 mm 24'11" 8344 mm 27'4"B Wheel base 3050 mm 10'0" 3050 mm 10'0"C Machine center point to front axle 1525 mm 5'0" 1525 mm 5'0"D Rear axle to counterweight 1968 mm 6'5" 1968 mm 6'5"E Ground clearance** 386 mm 1'3" 386 mm 1'3"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS** 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7"J Tire Radius (empty machine)** 685 mm 2'2" 685 mm 2'2"K Maximum digging depth (bucket level)** 100 mm 3.9" 135 mm 5.3"L Maximum rollback at carry height 45° 50°M Dump clearance at full lift and
45° discharge angle* 2869 mm 9'4" 3450 mm 11'3"N Hinge pin height at carry position 467 mm 1'6" 686 mm 2'2"O Reach at full lift and 45° dump* 1108 mm 3'7" 1374 mm 4'6"P Clearance level bucket at full height** 3642 mm 11'11" 4223 mm 13'10"Q Maximum hinge pin height** 3969 mm 13'0" 4550 mm 14'11"R Maximum overall height** 5242 mm 17'2" 5823 mm 19'1"S Full dump at maximum lift 49° 47°T Maximum roll back at maximum lift 54° 53°
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2 *Varies with bucket.**Varies with tires.
PHB-Sec23(pg175-290).indd 184PHB-Sec23(pg175-290).indd 184 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-185
Machine Dimensions● 950K, 962K
Wheel LoadersIntegrated Toolcarriers
Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.
MODEL
950K 962KGeneral Purpose
Bolt-on EdgesGeneral Purpose
Bolt-on Edges3.1 m3 4 yd3 3.3 m3 4.3 yd3
A Height to top of exhaust pipe 3099 mm 10'2" 3099 mm 10'2"B Height to top of engine compartment 2415 mm 7'11" 2415 mm 7'11"C Height to top of ROPS 3356 mm 11'0" 3356 mm 11'0"D Hinge pin height at carry position 659 mm 26" 677 mm 27"
◆ E Dump clearance at full lift and 45° discharge angle 2876 mm 9'5" 3054 mm 10'0"
F Hinge pin height at full lift 4021 mm 13'2" 4021 mm 13'2"◆ G Maximum overall height 5525 mm 18'2" 5788 mm 19'0"◆ H Maximum digging depth 90 mm 3.5" 88 mm 3.5"
J Machine center point to axle 1905 mm 6'3" 2055 mm 6'7"K Wheel base 3350 mm 10'11" 3350 mm 10'11"L Radius of tire 746 mm 29" 746 mm 29"
◆ M Maximum overall length 8162 mm 26'10" 8482 mm 27'10"◆ N Reach at full lift 1429 mm 4'8" 1392 mm 4'6"
O Maximum rollback at maximum lift 59° 59°P Maximum rollback at carry height 46° 51°Q Maximum rollback at ground 38° 39°
Ground clearance (std. tires) 397 mm 1'3" 397 mm 1'3"Tread width (std. tires) 2.14 m 7'0" 2.14 m 7'0"Width over tires (std. tires) 2.78 m 9'1" 2.78 m 9'1"Tires used for measurements L3 Michelin XHA2 L3 Michelin XHA2
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 185PHB-Sec23(pg175-290).indd 185 12/20/13 9:07 AM12/20/13 9:07 AM
Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.
MODEL
966M 966KGeneral Purpose
Bolt-on EdgesGeneral Purpose
Bolt-on Edges4.2 m3 5.49 yd3 4.2 m3 5.49 yd3
A Height to top of exhaust pipe 3522 mm 11'7" 3518 mm 11'6"B Height to top of engine compartment 2818 mm 9'3" 2828 mm 9'3"C Height to top of ROPS 3559 mm 11'9" 3547 mm 11'7"D Hinge pin height at carry position 630 mm 2'1" 640 mm 2'1"
◆ E Dump clearance at full lift and 45° discharge angle 2991 mm 9'10" 2991 mm 9'9"
F Hinge pin height at full lift 4235 mm 13'11" 4234 mm 13'10"◆ G Maximum overall height 5901 mm 19'5" 5902 mm 19'5"◆ H Maximum digging depth 125 mm 5" 124 mm 4.9"
J Machine center point to axle 1775 mm 5'10" 2187 mm 7'2"K Wheel base 3550 mm 11'8" 3450 mm 11'3"L Radius of tire 800 mm 2'8" 799 mm 31"
◆ M Maximum overall length 8749 mm 28'9" 8691 mm 28'7" ◆ N Reach at full lift 1353 mm 4'6" 1388 mm 4'6"
O Maximum rollback at maximum lift 62° 62°P Maximum rollback at carry height 50° 50°Q Maximum rollback at ground 42° 42°
Ground clearance (std. tires) 476 mm 1'7" 475 mm 1'6"Tread width (std. tires) 2.23 m 7'4" 2.23 m 7'4"Width over tires (std. tires) 3.00 m 9'11" 3.00 m 9'10"Tires used for measurements L3 Michelin XHA2 L3 Michelin XHA2
966M meets U.S. EPA Tier 4 Final/EU Stage IV emission standards and is only available in North America and Europe. Contact your local Cat dealer for product availability.966K meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and is only available in North America and Europe. Contact your local Cat dealer for product availability.
23-186 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 966M, 966K
PHB-Sec23(pg175-290).indd 186PHB-Sec23(pg175-290).indd 186 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-187
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● 972M, 972K, 980K
Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.
A Height to top of exhaust pipe 3522 mm 11'7" 3518 mm 11'6" 3737 mm 12'4"B Height to top of engine compartment 2818 mm 9'3" 2828 mm 9'3" 3109 mm 10'2"C Height to top of ROPS 3559 mm 11'9" 3547 mm 11'7" 3809 mm 12'6"D Hinge pin height at carry position 680 mm 2'3" 689 mm 2'3" 673 mm 2'0"
◆ E Dump clearance at full lift and 45° discharge angle 3155 mm 10'5" 3154 mm 10'4" 3273 mm 10'8"
F Hinge pin height at full lift 4458 mm 14'8" 4456 mm 14'7" 4539 mm 14'11"◆ G Maximum overall height 6031 mm 19'10" 6031 mm 19'10" 6421 mm 21'1"◆ H Maximum digging depth 103 mm 4" 103 mm 4" 103 mm 4"
J Machine center point to axle 1775 mm 5'10" 2473 mm 8'1" 1850 mm 6'1"K Wheel base 3550 mm 11'8" 3450 mm 11'3" 3700 mm 12'1"L Radius of tire 800 mm 2'8" 800 mm 31" 885 mm 35"
◆ M Maximum overall length 9315 mm 30'7" 9223 mm 30'4" 9509 mm 31'3" ◆ N Reach at full lift 1357 mm 4'6" 1392 mm 4'6" 1556 mm 5'1"
O Maximum rollback at maximum lift 56° 56° 61°P Maximum rollback at carry height 50° 50° 49°Q Maximum rollback at ground 41° 41° 41°
Ground clearance (std. tires) 476 mm 1'7" 475 mm 1'6" 460 mm 1'6"Tread width (std. tires) 2.23 m 7'4" 2.23 m 7'4" 2.44 m 8'0"Width over tires (std. tires) 3.00 m 9'11" 3.00 m 9'10" 3.25 m 10'8"Tires used for measurements L3 Michelin XHA3 L3 Michelin XHA3 L4 Michelin XLDD1
972M meets U.S. EPA Tier 4 Final/EU Stage IV emission standards and is only available in North America and Europe. Contact your local Cat dealer for product availability.972K and 980K meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 187PHB-Sec23(pg175-290).indd 187 12/20/13 9:07 AM12/20/13 9:07 AM
23-188 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 950 GC, 950H, 962H
Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.
A Height to top of exhaust pipe 3596 mm 11'9" 3278 mm 10'8" 3278 mm 10’8”B Height to top of engine compartment 2568 mm 8'5" 2448 mm 8'0" 2448 mm 8’0”C Height to top of ROPS 3458 mm 11'4" 3461 mm 11'4" 3461 mm 11’4”D Hinge pin height at carry position 655 mm 2'1" 624 mm 2'0" 664 mm 2’2”
◆ E Dump clearance at full lift and 45° discharge angle 3012 mm 9'10" 2936 mm 9'7" 3046 mm 9’11”
F Hinge pin height at full lift 4188 mm 13'8" 3992 mm 13'1" 4182 mm 13’7”◆ G Maximum overall height 5693 mm 18'8" 5363 mm 17'8" 5515 mm 18’2”◆ H Maximum digging depth 86 mm 3" 89 mm 3.5" 90 mm 3.5”
J Machine center point to axle 1650 mm 5'4" 1675 mm 5'5" 1675 mm 5’5”K Wheel base 3300 mm 10'9" 3350 mm 11'0" 3350 mm 11’0”L Radius of tire 750 mm 2'5" ___ mm __" ___ mm __"
◆ M Maximum overall length 8288 mm 27'2" 7961 mm 26'2" 8291 mm 27'3"◆ N Reach at full lift 1292 mm 4'2" 1263 mm 4'1" 1269 mm 4'1"
O Maximum rollback at maximum lift 60° 59.5° 59.5°P Maximum rollback at carry height 45° 49.4° 48.5°Q Maximum rollback at ground 40° 41° 40°
Ground clearance (std. tires) 460 mm 1'6" 397 mm 1'3" 397 mm 1’3”Tread width (std. tires) 2150 mm 7'0" 2140 mm 7'0" 2140 mm 7’0”Width over tires (std. tires) 2751 mm 9'0" 2784 mm 110" 2784 mm 110"Tires used for measurements L3 Triangle
TB51623.5R25 L3
Michelin XHA223.5R25 L3
Michelin XHA2Not available in all regions. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 188PHB-Sec23(pg175-290).indd 188 12/20/13 9:07 AM12/20/13 9:07 AM
23
Machine Dimensions● 966H, 972H, 980H
Wheel LoadersIntegrated Toolcarriers
Edition 44 23-189
Dimensions shown represent standard machine with general purpose bucket and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.
A Height to top of stack 3524 mm 11'6" 3524 mm 11'6" 3714 mm 12'2"B Height to top of engine compartment 2655 mm 8'8" 2655 mm 8'8" 2721 mm 8'11"C Height to top of ROPS 3575 mm 11'8" 3575 mm 11'8" 3776 mm 12'4"D Hinge pin height at carry position 641 mm 25" 691 mm 27" 644 mm 25"
◆ E Dump clearance at full lift and 45° discharge angle 3058 mm 10'0" 3187 mm 10'5" 3242 mm 10'7"
F Hinge pin height at full lift 4235 mm 13'10" 4458 mm 14'7" 4509 mm 14'9"◆ G Maximum overall height 5902 mm 19'5" 6195 mm 20'4" 6391 mm 21'0"◆ H Maximum digging depth 124 mm 5" 103 mm 4" 133 mm 5"
J Machine center point to axle 1725 mm 5'7" 1725 mm 5'7" 1850 mm 6'1"K Wheel base 3450 mm 11'3" 3450 mm 11'3" 3700 mm 12'2"L Radius of tire 799 mm 2'8" 799 mm 2'8" 855 mm 2'9"
◆ M Maximum overall length 8693 mm 28'7" 9177 mm 30'2" 9637 mm 31'8"◆ N Reach at full lift 1334 mm 4'4" 1363 mm 4'5" 1580 mm 5'2"
O Maximum rollback at maximum lift 61° 55° 61°P Maximum rollback at carry height 50° 50° 49°Q Maximum rollback at ground 42° 41° 41°
Ground clearance (std. tires) 434 mm 1'5" 434 mm 1'5" 430 mm 1'4"Tread width (std. tires) 2233 mm 7'3" 2233 mm 7'3" 2428 mm 8'0"Width over tires (std. tires) 2914 mm 9'6" 2914 mm 9'6" 3175 mm 10'5" Tires used for measurements 26.5R25 L3
Michelin XHA226.5R25 L3
Michelin XHA229.5R25 L3
Michelin XHA2Not available in all regions. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 189PHB-Sec23(pg175-290).indd 189 12/20/13 9:07 AM12/20/13 9:07 AM
23-190 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 986
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.
MODEL Standard Lift High LiftA Ground to top of exhaust stacks 3940 mm 12.9' 3940 mm 12.9'B Ground to top of ROPS 4110 mm 13.5' 4110 mm 13.5'C Ground to top of hood 2991 mm 9.8' 2991 mm 9.8'D Ground to center of front axle 978 mm 3.2' 978 mm 3.2'E Ground to fuel tank clearance 691 mm 2.3' 691 mm 2.3'F Ground to lower hitch clearance 459 mm 1.5' 459 mm 1.5'
◆ G Reach at maximum lift 2022 mm 6.6' 1904 mm 6.2'◆ H Clearance at maximum lift 3234 mm 10.6' 3738 mm 12.3'
J B-pin height at maximum lift 4912 mm 16.1' 5371 mm 17.6'◆ K Maximum overall height, bucket raised 6671 mm 21.9' 7067 mm 23.2'
L Rear axle center line to bumper 3132 mm 10.3' 3132 mm 10.3'M Wheel base 3810 mm 12.5' 3810 mm 12.5'
◆ N Maximum overall length 10 907 mm 35.8' 11 290 mm 37.0'O Front axle centerline to bucket tip 3987 mm 13.1' 4370 mm 14.3'
PHB-Sec23(pg175-290).indd 190PHB-Sec23(pg175-290).indd 190 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-191
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● 988K
High Lift Linkage
◆ Dimensions vary with bucket. Refer to Operation/Bucket Specifications.
MODEL 988KA Height to top of cab 4221 mm 13.8'B Height to top of exhaust stack 4214 mm 13.8'C Height to top of air cleaner 3881 mm 12.7'D Height to top of hood 3329 mm 10.9'E Center line of rear axle to edge of rear bumper 3187 mm 10.5'F Center line of front axle to hitch 2275 mm 7.46'G Wheel base length 4550 mm 14.93'H Ground clearance 568 mm 1.9'J Height to center of wheel 973 mm 3.2'K C-pin height** 944 mm 3.1'L Dig depth 220 mm 9"
*204 mm* *8"*M Rack back angle at ground 44.7°
43.6°*N Rack back angle at carry 52.9°
51°*O B-pin height 5881 mm 19.3'
*5479 mm* 18.0'*P Rack back angle at maximum lift 64.3°Q Dump angle at maximum lift –50.1°
**Standard Lift.
PHB-Sec23(pg175-290).indd 191PHB-Sec23(pg175-290).indd 191 12/20/13 9:07 AM12/20/13 9:07 AM
A Height to top of stack 4.76 m 15.6' 4.76 m 15.6' 5.24 m 17'2" 5.24 m 17'2"B Height to top of engine
compartment 3.55 m 11.6' 3.55 m 11.6' 4.0 m 13'1" 4.0 m 13'1"C Height to top of ROPS 5.11 m 16.7' 5.11 m 16.7' 5.67 m 18'7" 5.67 m 18'7"D Hinge pin height at carry position 816 mm 2.7' 862 mm 2.8' 1209 mm 4'0" 1339 mm 4'5"
◆ E Dump clearance at full lift and 45° discharge angle 4.04 m 13.3' 4.50 m 14.8' 4.49 m 14'9" 5.22 m 17'2"
◆ F Hinge pin height at full lift 6.01 m 19.7' 6.47 m 21.2' 6.92 m 22'8" 7.54 m 24'9"◆ G Maximum overall height 8.29 m 27.2' 8.75 m 28.7' 9.49 m 31'2" 9.93 m 32'7"◆ H Maximum digging depth 130 mm 5" 172 mm 7" 201 mm 8" 176 mm 7"
J Machine center point to axle 2.3 m 7.5' 2.3 m 7.5' 2.94 m 9'8" 2.94 m 9'8"K Wheel base 4.6 m 15.1' 4.6 m 15.1' 5.89 m 19'4" 5.89 m 19'4"L Radius of tire 1.19 m 3.9' 1.19 m 3.9' 1.37 m 4'6" 1.37 m 4'6"
◆ M Maximum overall length 12.89 m 42.3' 13.64 m 44.8' 15.9 m 52'2" 16.2 m 53'2"◆ N Reach at full lift 2.19 m 7.2' 2.59 m 8.5' 2.43 m 8'0" 2.19 m 7'2"
O Maximum rollback at maximum lift 63.8° 60.6° 65° 65°P Maximum rollback at carry height 48.8° 49.3° 52.7° 52.5°Q Maximum rollback at ground 40.4° 39.9° 43.4° 42.8°
Ground clearance (std. tires) 516 mm 1.7' 516 mm 1.7' 682 mm 26.8" 682 mm 26.8"Tread width (std. tires) 3.05 m 10' 3.05 m 10' 3.30 m 10'10" 3.30 m 10'10"Width over tires (std. tires) 4.24 m 13.9' 4.24 m 13.9' 4.50 m 14'9" 4.50 m 14'9"Tires used for measurements 45/65R39 XLDD2
SLR:1186 mm45/65R39 XLDD2
SLR:1186 mm— —
PHB-Sec23(pg175-290).indd 193PHB-Sec23(pg175-290).indd 193 12/20/13 9:07 AM12/20/13 9:07 AM
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 993K
23-194 Edition 44
Dimensions shown represent standard machine with spade edge rock bucket and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
993K 993KStandard Lift
Spade Edge Rock with Teeth & Segments
High LiftSpade Edge Rock with
Teeth & Segments13 m3 17 yd3 13 m3 17 yd3
A Height to top of stack 5.45 m 17'9" 5.45 m 17'9"B Height to top of engine compartment 4.25 m 14'0" 4.25 m 14'0"C Height to top of ROPS 6.00 m 19'7" 6.00 m 19'7"D Hinge pin height at carry position 1009 mm 39.7" 1185 mm 46.7"
◆ E Dump clearance at full lift and 45° discharge angle 4.65 m 15'3" 5.29 m 17'4"
F Hinge pin height at full lift 7.00 m 23'0" 7.64 m 25'1"◆ G Maximum overall height 9.79 m 32'1" 10.43 m 34'0"◆ H Maximum digging depth 181 mm 7" 246 mm 10"
J Machine center point to axle 2.94 m 9'8" 2.94 m 9'8"K Wheel base 5.89 m 19'4" 5.89 m 19'4"L Radius of tire 1.34 m 4'4" 1.34 m 4'4"
◆ M Maximum overall length 15.21 m 50'0" 15.84 m 52'0"◆ N Reach at full lift 2.50 m 8'2" 2.61 m 8'6"
O Maximum rollback at maximum lift 63.9° 65.7°P Maximum rollback at carry height 52.5° 53.5°Q Maximum rollback at ground 46.3° 46.1°
Ground clearance (std. tires) 590 mm 2'0" 590 mm 2'0"Tread width (std. tires) 3.54 m 11'6" 3.54 m 11'6"Width over tires (std. tires) 4.93 m 16'2" 4.93 m 16'2"Tires used for measurements 50/65-51 (L-5) 50/65-51 (L-5)
PHB-Sec23(pg175-290).indd 194PHB-Sec23(pg175-290).indd 194 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-195
Machine Dimensions● 994H
Wheel LoadersIntegrated Toolcarriers
Dimensions shown represent standard machine with spade edge rock bucket and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
994HStandard Lift
5640 mm (18'6")Spade Edge Bucket
with Teeth & Segments
994HStandard Lift
5640 mm (18'6")Spade Edge Bucket
with Teeth & Segments
994HStandard Lift
5640 mm (18'6")Spade Edge Bucket
with Teeth & Segments
15 m3 19.5 yd3 17 m3 22.5 yd3 19 m3 25 yd3
A Height to top of stack 7.0 m 23'0" 7.0 m 23'0" 7.0 m 23'0"B Height to top of engine
compartment 4.84 m 15.9' 4.84 m 15.9' 4.84 m 15.9'C Height to top of ROPS 6.75 m 22.1' 6.75 m 22.1' 6.75 m 22.1'D Hinge pin height at carry position 1030 mm 3.4' 1030 mm 3.4' 1030 mm 3.4'
◆ E Dump clearance at full lift and 45° discharge angle 5.77 m 18.9' 6 m 19.8' 5.6 m 18.3'
◆ F Hinge pin height at full lift 8.16 m 26.8' 8.16 m 26.8' 8.16 m 26.8'◆ G Maximum overall height 10.7 m 35.2' 10.87 m 35.7' 10.9 m 35.9'◆ H Maximum digging depth 108 mm 4" 108 mm 4" 68 mm 3"
J Machine center point to axle 3.2 m 10.5' 3.2 m 10.5' 3.2 m 10.5'K Wheel base 6.4 m 21'0" 6.4 m 21'0" 6.4 m 21'0"L Radius of tire 2.0 m 6.5' 2.0 m 6.5' 2.0 m 6.5'
◆ M Maximum overall length 16.6 m 54.5' 16.74 m 54.9' 16.86 m 55.3'◆ N Reach at full lift 2.07 m 6.8' 2.2 m 7.2' 2.3 m 7.6'
O Maximum rollback at maximum lift 64° 64° 64°P Maximum rollback at carry height 53° 53° 53°Q Maximum rollback at ground 40° 40° 40°
Ground clearance (std. tires) 820 mm 33.5" 820 mm 33.5" 820 mm 33.5"Tread width (std. tires) 4.1 m 13.6' 4.1 m 13.6' 4.1 m 13.6'Width over tires (std. tires) 5.5 m 18.1' 5.5 m 18.1' 5.5 m 18.1'Tires used for measurements 53.5/85-57 53.5/85-57 53.5/85-57
PHB-Sec23(pg175-290).indd 195PHB-Sec23(pg175-290).indd 195 12/20/13 9:07 AM12/20/13 9:07 AM
23-196 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 994H
Dimensions shown represent standard machine with spade edge rock bucket and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
994HHigh Lift
5640 mm (18'6")Spade Edge Bucket
with Teeth & Segments
994HHigh Lift
6200 mm (20'4")Spade Edge Bucket
with Teeth & Segments
994HHigh Lift
6200 mm (20'4")Straight Edge Coal Bucket
17 m3 22.5 yd3 19 m3 25 yd3 31 m3 41 yd3
A Height to top of stack 6.99 m 23'0" 6.99 m 23'0" 6.99 m 23'0"B Height to top of engine
compartment 4.84 m 15.9' 4.84 m 15.9' 4.84 m 15.9'C Height to top of ROPS 6.75 m 22.1' 6.75 m 22.1' 6.75 m 22.1'D Hinge pin height at carry position 1258 mm 4.2' 1258 mm 4.2' 1258 mm 4.2'
◆ E Dump clearance at full lift and 45° discharge angle 6.0 m 19.8' 5.9 m 19.3' 5.97 m 19.6'
◆ F Hinge pin height at full lift 8.5 m 27.9' 8.5 m 27.9' 8.46 m 27.8'◆ G Maximum overall height 11.2 m 36.7' 10.97 m 36.0' 12.2 m 40.0'◆ H Maximum digging depth 123 mm 4.8" 82 mm 3" 78 mm 3"
J Machine center point to axle 3.2 m 10.5' 3.2 m 10.5' 3.2 m 10.5'K Wheel base 6.4 m 21'0" 6.4 m 21'0" 6.4 m 21'0"L Radius of tire 2.0 m 6.5' 2.0 m 6.5' 2.0 m 6.5'
◆ M Maximum overall length 17.53 m 57.5' 17.64 m 57.9' 17.6 m 57.7'◆ N Reach at full lift 2.72 m 8.9' 2.76 m 9.1' 2.87 m 9.4'
O Maximum rollback at maximum lift 64° 64° 64°P Maximum rollback at carry height 58° 58° 58°Q Maximum rollback at ground 40° 40° 40°
Ground clearance (std. tires) 820 mm 2.7' 820 mm 2.7' 820 mm 2.7'Tread width (std. tires) 4.1 m 13.6' 4.1 m 13.6' 4.1 m 13.6'Width over tires (std. tires) 5.46 m 17.8' 5.46 m 17.8' 5.46 m 17.8'Tires used for measurements 53.5/85-57 53.5/85-57 53.5/85-57
PHB-Sec23(pg175-290).indd 196PHB-Sec23(pg175-290).indd 196 12/20/13 9:07 AM12/20/13 9:07 AM
23
Machine Dimensions● 994H
Wheel LoadersIntegrated Toolcarriers
Edition 44 23-197
Dimensions shown represent standard machine with spade edge rock bucket and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
994HExtended High Lift5640 mm (18'6")
Spade Edge Bucket with Teeth
& Segments
994HExtended High Lift6200 mm (20'4")
Spade Edge Bucket with Teeth
& Segments17 m3 22.5 yd3 19 m3 25 yd3
A Height to top of stack 7.01 m 23'0" 7.01 m 23'0"B Height to top of engine compartment 4.85 m 15.9' 4.85 m 15.9'C Height to top of ROPS 6.75 m 22.1' 6.75 m 22.1'D Hinge pin height at carry position 1545 mm 5.1' 1545 mm 5.1'
◆ E Dump clearance at full lift and 45° discharge angle 7.1 m 23.3' 7.0 m 23.0'
◆ F Hinge pin height at full lift 9.6 m 31.3' 9.6 m 31.3'◆ G Maximum overall height 12.3 m 40.3' 12.3 m 40.5'◆ H Maximum digging depth 89 mm 4" 89 mm 4"
J Machine center point to axle 3.2 m 10.5' 3.2 m 10.5'K Wheel base 6.4 m 21'0" 6.4 m 21'0"L Radius of tire 2.0 m 6.5' 2.0 m 6.5'
◆ M Maximum overall length 18.3 m 59.9' 18.5 m 60.9'◆ N Reach at full lift 2.7 m 8.9' 2.8 m 9.3'
O Maximum rollback at maximum lift 64° 64°P Maximum rollback at carry height 58° 58°Q Maximum rollback at ground 40° 40°
Ground clearance (std. tires) 830 mm 2.7' 830 mm 2.7'Tread width (std. tires) 4.1 m 13.6' 4.1 m 13.6'Width over tires (std. tires) 5.52 m 18.1' 5.52 m 18.1'Tires used for measurements 58/85-57 58/85-57
PHB-Sec23(pg175-290).indd 197PHB-Sec23(pg175-290).indd 197 12/20/13 9:07 AM12/20/13 9:07 AM
23-198 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● 994H
Dimensions shown represent standard machine with spade edge rock bucket and standard tires.
◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data
MODEL
994HExtended High Lift6200 mm (20'4")
Straight Edge Coal Bucket
994HSuper High Lift
6500 mm (21'4")Serrated Edge Coal Bucket
31 m3 41 yd3 36 m3 47 yd3
A Height to top of stack 7.01 m 23'0" 7.0 m 23'0"B Height to top of engine compartment 4.85 m 15.9' 4.85 m 15.9'C Height to top of ROPS 6.75 m 22.1' 6.75 m 22.1'D Hinge pin height at carry position 1545 mm 5.1' 1649 mm 5.4'
◆ E Dump clearance at full lift and 45° discharge angle 7.1 m 23.2' 7.34 m 24.1'
◆ F Hinge pin height at full lift 9.6 m 31.3' 10.1 m 33.1'◆ G Maximum overall height 13.3 m 43.5' 14.4 m 47.2'◆ H Maximum digging depth 89 mm 4" 299 mm 11.8"
J Machine center point to axle 3.2 m 10.5' 3.2 m 10.5'K Wheel base 6.4 m 21'0" 6.4 m 21'0"L Radius of tire 2.0 m 6.5' 2.0 m 6.5'
◆ M Maximum overall length 18.5 m 60.9' 19.5 m 64.0'◆ N Reach at full lift 2.9 m 9.5' 3.4 m 11.1'
O Maximum rollback at maximum lift 64° 64°P Maximum rollback at carry height 58° 58°Q Maximum rollback at ground 40° 40°
Ground clearance (std. tires) 830 mm 2.7' 830 mm 2.7'Tread width (std. tires) 4.1 m 13.6' 4.1 m 13.6'Width over tires (std. tires) 5.52 m 18.1' 5.52 m 18.1'Tires used for measurements 58/85-57 58/85-57
PHB-Sec23(pg175-290).indd 198PHB-Sec23(pg175-290).indd 198 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-199
Machine Dimensions● with Fusion Work Tool Bucket
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion general purpose bucket, bolt-on cutting edge, standard counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL924K
Standard924K
High LiftBucket 1.9 m3 2.5 yd3 1.9 m3 2.5 yd3
A Maximum overall length 7451 mm 24'5" 8093 mm 26'7"B Wheel base 3000 mm 9'10" 3000 mm 9'10"C Machine center point to front axle 1500 mm 4'11" 1500 mm 4'11"D Rear axle to counterweight 1986 mm 6'6" 1986 mm 6'6"E Ground clearance 400 mm 1'4" 400 mm 1'4"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7"J Tire radius (empty machine) 685 mm 2'3" 685 mm 2'3"K Maximum digging depth
(bucket level) 100 mm 4" 135 mm 5"L Maximum rollback at carry height 45° 49°M Dump clearance at full lift and
45° discharge angle 2885 mm 9'6" 3378 mm 11'1"N Hinge pin height at carry position 458 mm 1'6" 649 mm 2'2"O Reach at full lift and 45° dump 1024 mm 3'4" 1261 mm 4'2"P Clearance level bucket at full height 3580 mm 11'9" 4073 mm 13'4"Q Maximum hinge pin height 3907 mm 12'10" 4400 mm 14'5"R Maximum overall height 5076 mm 16'8" 5569 mm 18'3"S Full dump at maximum lift 50° 49°T Maximum roll back at maximum lift 54° 51°
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2
PHB-Sec23(pg175-290).indd 199PHB-Sec23(pg175-290).indd 199 12/20/13 9:07 AM12/20/13 9:07 AM
23-200 Edition 44
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion general purpose bucket, bolt-on cutting edge, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL930K
Standard930K
High LiftBucket 2.1 m3 2.8 yd3 2.1 m3 2.8 yd3
A Maximum overall length 7530 mm 24'8" 8324 mm 27'4"B Wheel base 3000 mm 9'10" 3000 mm 9'10"C Machine center point to front axle 1500 mm 4'11" 1500 mm 4'11"D Rear axle to counterweight 1993 mm 6'6" 1993 mm 6'6"E Ground clearance 400 mm 1'4" 400 mm 1'4"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7"J Tire radius (empty machine) 685 mm 2'3" 685 mm 2'3"K Maximum digging depth
(bucket level) 100 mm 4" 135 mm 5"L Maximum rollback at carry height 45° 50°M Dump clearance at full lift and
45° discharge angle 2828 mm 9'3" 3421 mm 11'3"N Hinge pin height at carry position 458 mm 1'6" 692 mm 2'3"O Reach at full lift and 45° dump 1064 mm 3'6" 1385 mm 4'7"P Clearance level bucket at full height 3580 mm 11'9" 4173 mm 13'8"Q Maximum hinge pin height 3907 mm 12'10" 4500 mm 14'9"R Maximum overall height 5147 mm 16'11" 5740 mm 18'10"S Full dump at maximum lift 49° 48°T Maximum roll back at maximum lift 54° 53°
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2
Machine Dimensions● with Fusion Work Tool Bucket
PHB-Sec23(pg175-290).indd 200PHB-Sec23(pg175-290).indd 200 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-201
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● with Fusion Work Tool Bucket
Dimensions listed are for a machine configured with Fusion general purpose bucket, bolt-on cutting edge, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL938K
Standard938K
High LiftBucket 2.5 m3 3.3 yd3 2.5 m3 3.3 yd3
A Maximum overall length 7656 mm 25'1" 8397 mm 27'7"B Wheel base 3050 mm 10'0" 3050 mm 10'0"C Machine center point to front axle 1525 mm 5'0" 1525 mm 5'0"D Rear axle to counterweight 1968 mm 6'5" 1968 mm 6'5"E Ground clearance 390 mm 1'3" 390 mm 1'3"F Height to top of engine compartment 2235 mm 7'4" 2235 mm 7'4"G Height to top of ROPS 3340 mm 10'11" 3340 mm 10'11"H Height to top of stack 3223 mm 10'7" 3223 mm 10'7"J Tire radius (empty machine) 685 mm 2'3" 685 mm 2'3"K Maximum digging depth
(bucket level) 101 mm 4" 135 mm 5"L Maximum rollback at carry height 45° 50°M Dump clearance at full lift and
45° discharge angle 2834 mm 9'4" 3415 mm 11'2"N Hinge pin height at carry position 467 mm 1'6" 686 mm 2'3"O Reach at full lift and 45° dump 1146 mm 3'9" 1413 mm 4'8"P Clearance level bucket at full height 3641 mm 11'11" 4222 mm 13'10"Q Maximum hinge pin height 3969 mm 13'0" 4550 mm 14'11"R Maximum overall height 5273 mm 17'4" 5853 mm 19'2"S Full dump at maximum lift 49° 47°T Maximum roll back at maximum lift 54° 53°
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2
PHB-Sec23(pg175-290).indd 201PHB-Sec23(pg175-290).indd 201 12/20/13 9:07 AM12/20/13 9:07 AM
23-202 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● with General Purpose Buckets and Bolt-on Cutting Edge
MODEL IT14G2Bucket 1.3 m3 1.7 yd3
A Maximum overall length 6424 mm 21'1"B Wheel base 2600 mm 8'6"C Machine center point to front axle 1300 mm 4'3"D Rear axle to counterweight 1658 mm 5'5"E Ground clearance 456 mm 18"F Height to top of engine compartment 2080 mm 6'10"G Height to top of ROPS 3100 mm 10'2"H Height to top of stack 2255 mm 7'5"J Tire radius (empty machine) 620 mm 2'0"K Maximum digging depth (bucket level) 175 mm 6.9"L Maximum rollback at carry height 54°M Maximum rollback at ground 49°N Dump clearance at full lift and 45° discharge angle 2920 mm 9'7"O Hinge pin height at carry position 374 mm 15"P Reach at full lift and 45° dump 787 mm 2'7"Q Clearance level bucket at full height 3565 mm 11'8"R Maximum hinge pin height 3798 mm 12'6"S Maximum overall height 4801 mm 15'9"T Full dump at maximum lift 48°U Maximum roll back at maximum lift 57°
Height to center of axle —Tires 17.5R25
*VersaLink/Hook On.
PHB-Sec23(pg175-290).indd 202PHB-Sec23(pg175-290).indd 202 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-203
Machine Dimensions● with Fusion Work Tool
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion work tool, standard counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL924K
StandardRated operating load
Per SAE J1197 2864 kg 6301 lb 2781 kg 6118 lb 2700 kg 5939 lbPer CEN 474-3 rough terrain 3437 kg 7561 lb 3337 kg 7342 lb 3239 kg 7127 lbPer CEN 474-3 firm level ground 4583 kg 10,083 lb 4450 kg 9789 lb 4319 kg 9502 lb
A Maximum overall length 7875 mm 25'10" 8025 mm 26'4" 8179 mm 26'10"B Reach with forks at ground level 926 mm 3'0" 926 mm 3'0" 926 mm 3'0"C Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and
forks level 1569 mm 5'2" 1569 mm 5'2" 1569 mm 5'2"E Reach with fork at maximum height 767 mm 2'6" 767 mm 2'6" 767 mm 2'6"F Arms horizontal and forks level 1792 mm 5'11" 1792 mm 5'11" 1792 mm 5'11"G Ground to top of tine at
maximum height 3693 mm 12'1" 3693 mm 12'1" 3693 mm 12'1"H Fork tine length 1220 mm 4'0" 1370 mm 4'6" 1524 mm 5'0"
PHB-Sec23(pg175-290).indd 203PHB-Sec23(pg175-290).indd 203 12/20/13 9:07 AM12/20/13 9:07 AM
23-204 Edition 44
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion work tool, standard counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL924K
High LiftRated operating load
Per SAE J1197 2284 kg 5025 lb 2224 kg 4892 lb 2164 kg 4761 lbPer CEN 474-3 rough terrain 2740 kg 6028 lb 2668 kg 5870 lb 2597 kg 5713 lbPer CEN 474-3 firm level ground 3654 kg 8039 lb 3558 kg 7827 lb 3462 kg 7617 lb
A Maximum overall length 8528 mm 28'0" 8678 mm 28'6" 8832 mm 29'0"B Reach with forks at ground level 1578 mm 5'2" 1578 mm 5'2" 1578 mm 5'2"C Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and
forks level 2092 mm 6'10" 2092 mm 6'10" 2092 mm 6'10"E Reach with fork at maximum height 1004 mm 3'4" 1004 mm 3'4" 1004 mm 3'4"F Arms horizontal and forks level 1792 mm 5'11" 1792 mm 5'11" 1792 mm 5'11"G Ground to top of tine at
maximum height 4186 mm 13'9" 4186 mm 13'9" 4186 mm 13'9"H Fork tine length 1220 mm 4'0" 1370 mm 4'6" 1524 mm 5'0"
PHB-Sec23(pg175-290).indd 204PHB-Sec23(pg175-290).indd 204 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-205
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● with Fusion Work Tool
Dimensions listed are for a machine configured with Fusion work tool, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL930K
StandardRated operating load
Per SAE J1197 3251 kg 7152 lb 3158 kg 6948 lb 3067 kg 6747 lbPer CEN 474-3 rough terrain 3901 kg 8582 lb 3790 kg 8337 lb 3680 kg 8097 lbPer CEN 474-3 firm level ground 5202 kg 11,444 lb 5053 kg 11,116 lb 4907 kg 10,796 lb
A Maximum overall length 7882 mm 25'10" 8032 mm 26'4" 8186 mm 26'10"B Reach with forks at ground level 926 mm 3'0" 926 mm 3'0" 926 mm 3'0"C Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and
forks level 1569 mm 5'2" 1569 mm 5'2" 1569 mm 5'2"E Reach with fork at maximum height 767 mm 2'6" 767 mm 2'6" 767 mm 2'6"F Arms horizontal and forks level 1792 mm 5'11" 1792 mm 5'11" 1792 mm 5'11"G Ground to top of tine at
maximum height 3693 mm 12'1" 3693 mm 12'1" 3693 mm 12'1"H Fork tine length 1220 mm 4'0" 1370 mm 4'6" 1524 mm 5'0"
PHB-Sec23(pg175-290).indd 205PHB-Sec23(pg175-290).indd 205 12/20/13 9:07 AM12/20/13 9:07 AM
23-206 Edition 44
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion work tool, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL930K
High LiftRated operating load
Per SAE J1197 2476 kg 5447 lb 2414 kg 5310 lb 2352 kg 5174 lbPer CEN 474-3 rough terrain 2971 kg 6537 lb 2896 kg 6372 lb 2822 kg 6209 lbPer CEN 474-3 firm level ground 3962 kg 8716 lb 3862 kg 8496 lb 3763 kg 8279 lb
A Maximum overall length 8689 mm 28'6" 8839 mm 29'0" 8993 mm 29'6"B Reach with forks at ground level 1732 mm 5'8" 1732 mm 5'8" 1732 mm 5'8"C Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and
forks level 2222 mm 7'3" 2222 mm 7'3" 2222 mm 7'3"E Reach with fork at maximum height 1087 mm 3'7" 1087 mm 3'7" 1087 mm 3'7"F Arms horizontal and forks level 1792 mm 5'11" 1792 mm 5'11" 1792 mm 5'11"G Ground to top of tine at
maximum height 4286 mm 14'1" 4286 mm 14'1" 4286 mm 14'1"H Fork tine length 1220 mm 4'0" 1370 mm 4'6" 1554 mm 5'1"
PHB-Sec23(pg175-290).indd 206PHB-Sec23(pg175-290).indd 206 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-207
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● with Fusion Work Tool
Dimensions listed are for a machine configured with Fusion work tool, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL938K
StandardRated operating load
Per SAE J1197 3765 kg 8283 lb 3661 kg 8054 lb 3559 kg 7829 lbPer CEN 474-3 rough terrain 4518 kg 9940 lb 4393 kg 9665 lb 4270 kg 9394 lbPer CEN 474-3 firm level ground 6024 kg 13,253 lb 5858 kg 12,887 lb 5694 kg 12,526 lb
A Maximum overall length 7942 mm 26'1" 8092 mm 26'7" 8246 mm 27'1"B Reach with forks at ground level 961 mm 3'2" 961 mm 3'2" 961 mm 3'2"C Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and
forks level 1617 mm 5'4" 1617 mm 5'4" 1617 mm 5'4"E Reach with fork at maximum height 814 mm 2'8" 814 mm 2'8" 814 mm 2'8"F Arms horizontal and forks level 1830 mm 6'0" 1830 mm 6'0" 1830 mm 6'0"G Ground to top of tine at
maximum height 3758 mm 12'4" 3758 mm 12'4" 3758 mm 12'4"H Fork tine length 1220 mm 4'0" 1370 mm 4'6" 1554 mm 5'1"
PHB-Sec23(pg175-290).indd 207PHB-Sec23(pg175-290).indd 207 12/20/13 9:07 AM12/20/13 9:07 AM
23-208 Edition 44
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion work tool, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL938K
High LiftRated operating load
Per SAE J1197 2941 kg 6469 lb 2869 kg 6312 lb 2798 kg 6156 lbPer CEN 474-3 rough terrain 3529 kg 7763 lb 3443 kg 7574 lb 3358 kg 7387 lbPer CEN 474-3 firm level ground 4705 kg 10,351 lb 4590 kg 10,099 lb 4477 kg 9849 lb
A Maximum overall length 8695 mm 28'6" 8845 mm 29'0" 8999 mm 29'6"B Reach with forks at ground level 1714 mm 5'7" 1714 mm 5'7" 1714 mm 5'7"C Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and
forks level 2224 mm 7'4" 2224 mm 7'4" 2224 mm 7'4"E Reach with fork at maximum height 1081 mm 3'7" 1081 mm 3'7" 1081 mm 3'7"F Arms horizontal and forks level 1830 mm 6'0" 1830 mm 6'0" 1830 mm 6'0"G Ground to top of tine at
maximum height 4339 mm 14'3" 4339 mm 14'3" 4339 mm 14'3"H Fork tine length 1220 mm 4'0" 1370 mm 4'6" 1554 mm 5'1"
PHB-Sec23(pg175-290).indd 208PHB-Sec23(pg175-290).indd 208 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-209
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● with Pallet Forks
MODEL IT14G2924K (LRC)*
StandardRated operating load
Per SAE J1197 1870 kg 4123 lb 2835 kg 6247 lbPer CEN 474-3** rough terrain 2244 kg 4948 lb 3402 kg 7497 lbPer CEN 474-3** firm level ground 2992 kg 6597 lb 4536 kg 9996 lb
A Maximum overall length 6873 mm 22'7" 7840 mm 25'8"B Reach with forks at ground level 745 mm 2'5" 891 mm 2'11"C Load center 600 mm 24" 610 mm 2'0"D Reach with arms horizontal and forks level 1490 mm 4'11" 1522 mm 4'11"E Reach with fork at maximum height 586 mm 1'11" 724 mm 2'4"F Arms horizontal and forks level 1808 mm 5'11" 1761 mm 5'9"G Ground to top of tine at maximum height 3708 mm 12'2" 3639 mm 11'11"H Fork tine length 1200 mm 3'11" 1220 mm 4'0"
PHB-Sec23(pg175-290).indd 209PHB-Sec23(pg175-290).indd 209 12/20/13 9:07 AM12/20/13 9:07 AM
MODEL930K (LRC)*
Standard938K (LRC)*
StandardRated operating load
Per SAE J1197 3144 kg 6929 lb 3655 kg 8055 lbPer EN 474-3 rough terrain 3772 kg 8313 lb 4387 kg 9668 lbPer EN 474-3 firm level ground 5030 kg 11,086 lb 5849 kg 12,891 lb
A Maximum overall length 7882 mm 25'10" 7942 mm 26'0"B Reach with forks at ground level 926 mm 3'0" 961 mm 3'1"C Load center 610 mm 2'0" 610 mm 2'0"D Reach with arms horizontal and forks level 1569 mm 5'1" 1617 mm 5'3"E Reach with fork at maximum height 767 mm 2'6" 814 mm 2'8"F Arms horizontal and forks level 1792 mm 5'10" 1830 mm 6'0"G Ground to top of tine at maximum height 3693 mm 12'1" 3758 mm 12'3"H Fork tine length 1220 mm 4'0" 1220 mm 4'0"
PHB-Sec23(pg175-290).indd 210PHB-Sec23(pg175-290).indd 210 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-211
Machine Dimensions● with Fusion Pallet Forks
Wheel LoadersIntegrated Toolcarriers
MODEL 950K 1 Fork tine length 1524 mm 60" 1829 mm 72" 2134 mm 84" 2438 mm 96" 2 Load center 762 mm 30" 915 mm 36" 1067 mm 42" 1219 mm 48"
Tipping load — forks level straight 9232 kg 20,347 lb 8763 kg 19,313 lb 8327 kg 18,353 lb 7924 kg 17,464 lbTipping load — forks level articulated 7985 kg 17,599 lb 7570 kg 16,685 lb 7185 kg 15,835 lb 6827 kg 15,047 lbRated load (SAE J1197) 3993 kg 8800 lb 3785 kg 8343 lb 3592 kg 7917 lb 3414 kg 7523 lbRated load (CEN EN 474-3 rough terrain) 4791 kg 10,559 lb 4542 kg 10,011 lb 4311 kg 9501 lb 4096 kg 9028 lbRated load (CEN EN 474-3 firm
and level ground) 6388 kg 14,079 lb 6056 kg 13,348 lb 5748 kg 12,668 lb 5424 kg 11,954 lb 3 Maximum overall length 8774 mm 345.4" 9079 mm 357.4" 9384 mm 369.4" 9688 mm 381.4" 4 Reach with forks at ground level 1189 mm 46.8" 1189 mm 46.8" 1189 mm 46.8" 1189 mm 46.8" 5 Ground to top of tine at minimum
height and fork level 68 mm 2.7" 68 mm 2.7" 68 mm 2.7" 68 mm 2.7" 6 Reach with arms horizontal
and forks level 1728 mm 68.0" 1728 mm 68.0" 1728 mm 68.0" 1728 mm 68.0" 7 Reach with fork at maximum height 1013 mm 39.9" 1013 mm 39.9" 1013 mm 39.9" 1013 mm 39.9" 8 Ground to top of tine with arms
horizontal and fork level 1798 mm 70.8" 1798 mm 70.8" 1798 mm 70.8" 1798 mm 70.8" 9 Ground to top of tine at maximum
height and fork level 3733 mm 147.0" 3733 mm 147.0" 3733 mm 147.0" 3733 mm 147.0"10 Overall height of fork at full lift
(top of carriage to ground) 4863 mm 191.5" 4863 mm 191.5" 4863 mm 191.5" 4863 mm 191.5"11 Clearance at full lift and maximum dump 2438 mm 96.0" 2222 mm 87.5" 2006 mm 79.0" 1792 mm 70.5"12 Maximum discharge angle
from horizontal 45° 45° 45° 45°13 Carriage width 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5"14 Carriage height 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0"15 Outside tine width (maximum spread) 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7"16 Outside tine width (minimum spread) 576 mm 22.7" 576 mm 22.7" 576 mm 22.7" 576 mm 22.7"
Tine width (single tine) 180 mm 7.1" 180 mm 7.1" 180 mm 7.1" 180 mm 7.1"Tine thickness 90 mm 3.5" 90 mm 3.5" 90 mm 3.5" 90 mm 3.5"Operating weight 19 445 kg 42,857 lb 19 507 kg 42,994 lb 19 570 kg 43,133 lb 19 632 kg 43,269 lb
Based on 2438 mm (96") carriage, Fusion coupler and Fusion pallet fork.
Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning, ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator. Static tip-ping loads conform to the international standard as defined in ISO* 14397-1 (Sept2007).
Specifications and ratings conform to the following standards: ISO 14397-1, SAE** J1197, SAE J732, CEN*** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is deter-mined by: • SAE J1197: 50% of full turn static tipping load or hydraulic limit. • CEN EN 474-3: 60% of full turn static tipping load on rough terrain or
hydraulic limit.• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground
or hydraulic limit.
***ISO — International Organization for Standardization***SAE — Society of Automotive Engineers***CEN — European Committee for Standardization
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 211PHB-Sec23(pg175-290).indd 211 12/20/13 9:07 AM12/20/13 9:07 AM
23-212 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● with Fusion Pallet Forks
MODEL 962K 1 Fork tine length 1524 mm 60" 1829 mm 72" 2134 mm 84" 2438 mm 96" 2 Load center 762 mm 30" 915 mm 36" 1067 mm 42" 1219 mm 48"
Tipping load — forks level straight 10 192 kg 22,463 lb 9694 kg 21,366 lb 9231 kg 20,344 lb 8801 kg 19,398 lbTipping load — forks level articulated 8767 kg 19,322 lb 8329 kg 18,357 lb 7921 kg 17,458 lb 7543 kg 16,625 lbRated load (SAE J1197) 4383 kg 9661 lb 4165 kg 9179 lb 3961 kg 8729 lb 3771 kg 8312 lbRated load (CEN EN 474-3 rough terrain) 5260 kg 11,593 lb 4997 kg 11,014 lb 4753 kg 10,475 lb 4526 kg 9975 lbRated load (CEN EN 474-3 firm
and level ground) 7013 kg 15,457 lb 6663 kg 14,686 lb 6337 kg 13,967 lb 6034 kg 13,300 lb 3 Maximum overall length 9042 mm 356.0" 9347 mm 368.0" 9652 mm 380.0" 9956 mm 392.0" 4 Reach with forks at ground level 1307 mm 51.5" 1307 mm 51.5" 1307 mm 51.5" 1307 mm 51.5" 5 Ground to top of tine at minimum
height and fork level 67 mm 2.6" 67 mm 2.6" 67 mm 2.6" 67 mm 2.6" 6 Reach with arms horizontal
and forks level 1826 mm 71.9" 1826 mm 71.9" 1826 mm 71.9" 1826 mm 71.9" 7 Reach with fork at maximum height 947 mm 37.3" 947 mm 37.3" 947 mm 37.3" 947 mm 37.3" 8 Ground to top of tine with arms
horizontal and fork level 1798 mm 70.8" 1798 mm 70.8" 1798 mm 70.8" 1798 mm 70.8" 9 Ground to top of tine at maximum
height and fork level 3950 mm 155.5" 3950 mm 155.5" 3950 mm 155.5" 3950 mm 155.5"10 Overall height of fork at full lift
(top of carriage to ground) 5080 mm 200.0" 5080 mm 200.0" 5080 mm 200.0" 5080 mm 200.0"11 Clearance at full lift and maximum dump 2655 mm 104.5" 2439 mm 96.0" 2223 mm 87.5" 2008 mm 79.1"12 Maximum discharge angle
from horizontal 45° 45° 45° 45°13 Carriage width 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5"14 Carriage height 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0"15 Outside tine width (maximum spread) 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7"16 Outside tine width (minimum spread) 576 mm 22.7" 576 mm 22.7" 576 mm 22.7" 576 mm 22.7"
Tine width (single tine) 180 mm 7.1" 180 mm 7.1" 180 mm 7.1" 180 mm 7.1"Tine thickness 90 mm 3.5" 90 mm 3.5" 90 mm 3.5" 90 mm 3.5"Operating weight 20 394 kg 44,948 lb 20 456 kg 45,084 lb 20 519 kg 45,223 lb 20 581 kg 45,360 lb
Based on 2438 mm (96") carriage, Fusion coupler and Fusion pallet fork.
Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning, ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator. Static tip-ping loads conform to the international standard as defined in ISO* 14397-1 (Sept2007).
Specifications and ratings conform to the following standards: ISO 14397-1, SAE** J1197, SAE J732, CEN*** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is deter-mined by: • SAE J1197: 50% of full turn static tipping load or hydraulic limit. • CEN EN 474-3: 60% of full turn static tipping load on rough terrain or
hydraulic limit.• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground
or hydraulic limit.
***ISO — International Organization for Standardization***SAE — Society of Automotive Engineers***CEN — European Committee for Standardization
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 212PHB-Sec23(pg175-290).indd 212 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-213
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● with Fusion Pallet Forks
MODEL 966K 1 Fork tine length 1524 mm 60" 1829 mm 72" 2134 mm 84" 2438 mm 96" 2 Load center 762 mm 30" 915 mm 36" 1067 mm 42" 1219 mm 48"
Tipping load — forks level straight 12 045 kg 26,548 lb 11 464 kg 25,267 lb 10 925 kg 24,079 lb 10 426 kg 22,979 lbTipping load — forks level articulated 10 629 kg 23,427 lb 10 109 kg 22,280 lb 9625 kg 21,214 lb 9178 kg 20,228 lbRated load (SAE J1197) 5315 kg 11,713 lb 5054 kg 11,140 lb 4813 kg 10,607 lb 4589 kg 10,114 lbRated load (CEN EN 474-3 rough terrain) 6378 kg 14,506 lb 6065 kg 13,368 lb 5775 kg 12,729 lb 5507 kg 12,137 lbRated load (CEN EN 474-3 firm
and level ground) 8503 kg 18,741 lb 7806 kg 17,205 lb 6928 kg 15,269 lb 6207 kg 13,681 lb 3 Maximum overall length 9148 mm 360.2" 9453 mm 372.2" 9758 mm 384.2" 10 062 mm 396.2" 4 Reach with forks at ground level 1122 mm 44.2" 1122 mm 44.2" 1122 mm 44.2" 1122 mm 44.2" 5 Ground to top of tine at minimum
height and fork level 97 mm 3.8" 97 mm 3.8" 97 mm 3.8" 97 mm 3.8" 6 Reach with arms horizontal
and forks level 1723 mm 67.9" 1723 mm 67.9" 1723 mm 67.9" 1723 mm 67.9" 7 Reach with fork at maximum height 856 mm 33.7" 856 mm 33.7" 856 mm 33.7" 856 mm 33.7" 8 Ground to top of tine with arms
horizontal and fork level 1870 mm 73.6" 1870 mm 73.6" 1870 mm 73.6" 1870 mm 73.6" 9 Ground to top of tine at maximum
height and fork level 3953 mm 155.6" 3953 mm 155.6" 3953 mm 155.6" 3953 mm 155.6"10 Overall height of fork at full lift
(top of carriage to ground) 5083 mm 200.1" 5083 mm 200.1" 5083 mm 200.1" 5083 mm 200.1"11 Clearance at full lift and maximum dump 2580 mm 101.6" 2349 mm 92.5" 2119 mm 83.4" 1889 mm 74.4"12 Maximum discharge angle
from horizontal 49° 49° 49° 49°13 Carriage width 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5"14 Carriage height 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0"15 Outside tine width (maximum spread) 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7"16 Outside tine width (minimum spread) 576 mm 22.7" 576 mm 22.7" 576 mm 22.7" 576 mm 22.7"
Tine width (single tine) 180 mm 7.1" 180 mm 7.1" 180 mm 7.1" 180 mm 7.1"Tine thickness 90 mm 3.5" 90 mm 3.5" 90 mm 3.5" 90 mm 3.5"Operating weight 23 588 kg 51,988 lb 23 650 kg 52,124 lb 23 713 kg 52,263 lb 23 775 kg 52,400 lb
Based on 2438 mm (96") carriage, Fusion coupler and Fusion pallet fork.
Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning, ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator. Static tip-ping loads conform to the international standard as defined in ISO* 14397-1 (Sept2007).
Specifications and ratings conform to the following standards: ISO 14397-1, SAE** J1197, SAE J732, CEN*** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is deter-mined by: • SAE J1197: 50% of full turn static tipping load or hydraulic limit. • CEN EN 474-3: 60% of full turn static tipping load on rough terrain or
hydraulic limit.• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground
or hydraulic limit.
***ISO — International Organization for Standardization***SAE — Society of Automotive Engineers***CEN — European Committee for Standardization
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 213PHB-Sec23(pg175-290).indd 213 12/20/13 9:07 AM12/20/13 9:07 AM
23-214 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● with Fusion Pallet Forks
MODEL 972K 1 Fork tine length 1524 mm 60" 1829 mm 72" 2134 mm 84" 2438 mm 96" 2 Load center 762 mm 30" 915 mm 36" 1067 mm 42" 1219 mm 48"
Tipping load — forks level straight 13 924 kg 30,688 lb 13 285 kg 29,279 lb 12 690 kg 27,969 lb 12 139 kg 26,754 lbTipping load — forks level articulated 12 202 kg 26,894 lb 11 634 kg 25,642 lb 11 105 kg 24,476 lb 10 615 kg 23,395 lbRated load (SAE J1197) 6101 kg 13,447 lb 5817 kg 12,821 lb 5553 kg 12,238 lb 5307 kg 11,697 lbRated load (CEN EN 474-3 rough terrain) 7321 kg 16,136 lb 6981 kg 15,385 lb 6663 kg 14,686 lb 6369 kg 14,037 lbRated load (CEN EN 474-3 firm
and level ground) 9762 kg 21,515 lb 9307 kg 20,514 lb 8884 kg 19,581 lb 8492 kg 18,716 lb 3 Maximum overall length 9597 mm 377.8" 9902 mm 389.8" 10 207 mm 401.8" 10 511 mm 413.8" 4 Reach with forks at ground level 1284 mm 50.5" 1284 mm 50.5" 1284 mm 50.5" 1284 mm 50.5" 5 Ground to top of tine at minimum
height and fork level 75 mm 3.0" 75 mm 3.0" 75 mm 3.0" 75 mm 3.0" 6 Reach with arms horizontal
and forks level 1854 mm 73.0" 1854 mm 73.0" 1854 mm 73.0" 1854 mm 73.0" 7 Reach with fork at maximum height 808 mm 31.8" 808 mm 31.8" 808 mm 31.8" 808 mm 31.8" 8 Ground to top of tine with arms
horizontal and fork level 1871 mm 73.6" 1871 mm 73.6" 1871 mm 73.6" 1871 mm 73.6" 9 Ground to top of tine at maximum
height and fork level 4177 mm 164.4" 4177 mm 164.4" 4177 mm 164.4" 4177 mm 164.4"10 Overall height of fork at full lift
(top of carriage to ground) 5307 mm 208.9" 5307 mm 208.9" 5307 mm 208.9" 5307 mm 208.9"11 Clearance at full lift and maximum dump 2803 mm 110.4" 2573 mm 101.3" 2343 mm 92.2" 2113 mm 83.2"12 Maximum discharge angle
from horizontal 49° 49° 49° 49°13 Carriage width 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5" 2528 mm 99.5"14 Carriage height 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0" 1220 mm 48.0"15 Outside tine width (maximum spread) 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7" 2178 mm 85.7"16 Outside tine width (minimum spread) 576 mm 22.7" 576 mm 22.7" 576 mm 22.7" 576 mm 22.7"
Tine width (single tine) 180 mm 7.1" 180 mm 7.1" 180 mm 7.1" 180 mm 7.1"Tine thickness 90 mm 3.5" 90 mm 3.5" 90 mm 3.5" 90 mm 3.5"Operating weight 25 629 kg 56,486 lb 25 691 kg 56,623 lb 25 754 kg 56,762 lb 25 816 kg 56,898 lb
Based on 2438 mm (96") carriage, Fusion coupler and Fusion pallet fork.
Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning, ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator. Static tip-ping loads conform to the international standard as defined in ISO* 14397-1 (Sept2007).
Specifications and ratings conform to the following standards: ISO 14397-1, SAE** J1197, SAE J732, CEN*** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is deter-mined by: • SAE J1197: 50% of full turn static tipping load or hydraulic limit. • CEN EN 474-3: 60% of full turn static tipping load on rough terrain or
hydraulic limit.• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground
or hydraulic limit.
***ISO — International Organization for Standardization***SAE — Society of Automotive Engineers***CEN — European Committee for Standardization
These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability.
PHB-Sec23(pg175-290).indd 214PHB-Sec23(pg175-290).indd 214 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-215
Machine Dimensions● with Fusion Work Tool
Wheel LoadersIntegrated Toolcarriers
Dimensions listed are for a machine configured with Fusion work tool, standard counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL924K
Standard924K
High LiftOperating load (retracted) @ full articulation 1903 kg 4186 lb 1608 kg 3538 lb
A Reach horizontal (retracted) 3727 mm 12'3" 4250 mm 13'11"Operating load (mid-position) @ full articulation 1614 kg 3550 lb 1386 kg 3049 lb
B Reach horizontal (mid-position) 4527 mm 14'10" 5050 mm 16'7"Operating load (extended) @ full articulation 1401 kg 3082 lb 1218 kg 2679 lb
C Reach horizontal (extended) 5327 mm 17'6" 5850 mm 19'2"D Reach full down (retracted) 1045 mm 3'5" 1689 mm 5'6"E Reach full down (mid-position) 1276 mm 4'2" 1922 mm 6'4"F Reach full down (extended) 1507 mm 4'11" 2154 mm 7'1"G Clearance horizontal 1854 mm 6'1" 1854 mm 6'1"H Clearance full down (retracted) 2310 mm 7'7" 2343 mm 7'8"J Clearance full down (mid-position) 3076 mm 10'1" 3109 mm 10'2"K Clearance full down (extended) 3842 mm 12'7" 3874 mm 12'9"L Reach at maximum height (retracted) 2333 mm 7'8" 2646 mm 8'8"M Reach at maximum height (mid-position) 2919 mm 9'7" 3258 mm 10'8"N Reach at maximum height (extended) 3505 mm 11'6" 3869 mm 12'8"P Clearance at maximum height (retracted) 5568 mm 18'3" 5963 mm 19'7"Q Clearance at maximum height (mid-position) 6112 mm 20'1" 6479 mm 21'3"R Clearance at maximum height (extended) 6657 mm 21'10" 6995 mm 22'11"
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2
PHB-Sec23(pg175-290).indd 215PHB-Sec23(pg175-290).indd 215 12/20/13 9:07 AM12/20/13 9:07 AM
23-216 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● with Fusion Work Tool
Dimensions listed are for a machine configured with Fusion work tool, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL930K
Standard930K
High LiftOperating load (retracted) @ full articulation 2158 kg 4748 lb 1763 kg 3879 lb
A Reach horizontal (retracted) 3727 mm 12'3" 4380 mm 14'4"Operating load (mid-position) @ full articulation 1830 kg 4026 lb 1525 kg 3355 lb
B Reach horizontal (mid-position) 4527 mm 14'10" 5180 mm 17'0"Operating load (extended) @ full articulation 1589 kg 3496 lb 1344 kg 2956 lb
C Reach horizontal (extended) 5327 mm 17'6" 5980 mm 19'7"D Reach full down (retracted) 1045 mm 3'5" 1908 mm 6'3"E Reach full down (mid-position) 1276 mm 4'2" 2160 mm 7'1"F Reach full down (extended) 1507 mm 4'11" 2412 mm 7'11"G Clearance horizontal 1854 mm 6'1" 1854 mm 6'1"H Clearance full down (retracted) 2310 mm 7'7" 2327 mm 7'8"J Clearance full down (mid-position) 3076 mm 10'1" 3087 mm 10'2"K Clearance full down (extended) 3842 mm 12'7" 3846 mm 12'7"L Reach at maximum height (retracted) 2333 mm 7'8" 2689 mm 8'10"M Reach at maximum height (mid-position) 2919 mm 9'7" 3287 mm 10'9"N Reach at maximum height (extended) 3505 mm 11'6" 3885 mm 12'9"P Clearance at maximum height (retracted) 5568 mm 18'3" 6116 mm 20'1"Q Clearance at maximum height (mid-position) 6112 mm 20'1" 6647 mm 21'10"R Clearance at maximum height (extended) 6657 mm 21'10" 7178 mm 23'7"
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2
PHB-Sec23(pg175-290).indd 216PHB-Sec23(pg175-290).indd 216 12/20/13 9:07 AM12/20/13 9:07 AM
Edition 44 23-217
Wheel LoadersIntegrated Toolcarriers
23
Machine Dimensions● with Fusion Work Tool
Dimensions listed are for a machine configured with Fusion work tool, heavy counterweight, additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
MODEL938K
Standard938K
High LiftOperating load (retracted) @ full articulation 2482 kg 5460 lb 2091 kg 4610 lb
A Reach horizontal (retracted) 3775 mm 12'5" 4383 mm 14'5"Operating load (mid-position) @ full articulation 2109 kg 4640 lb 1809 kg 3988 lb
B Reach horizontal (mid-position) 4575 mm 15'0" 5183 mm 17'0"Operating load (extended) @ full articulation 1833 kg 4036 lb 1594 kg 3514 lb
C Reach horizontal (extended) 2512 mm 8'3" 5983 mm 19'8"D Reach full down (retracted) 2134 mm 7'0" 1873 mm 6'2"E Reach full down (mid-position) 1324 mm 4'4" 2121 mm 7'0"F Reach full down (extended) 1855 mm 6'1" 2369 mm 7'9"G Clearance horizontal 1890 mm 6'2" 1890 mm 6'2"H Clearance full down (retracted) 2316 mm 7'7" 2340 mm 7'8"J Clearance full down (mid-position) 3081 mm 10'1" 3100 mm 10'2"K Clearance full down (extended) 3846 mm 12'7" 3861 mm 12'8"L Reach at maximum height (retracted) 2361 mm 7'9" 2679 mm 8'9"M Reach at maximum height (mid-position) 2943 mm 9'8" 3277 mm 10'9"N Reach at maximum height (extended) 3525 mm 11'7" 3874 mm 12'9"P Clearance at maximum height (retracted) 5655 mm 18'7" 6174 mm 20'3"Q Clearance at maximum height (mid-position) 6204 mm 20'4" 6706 mm 22'0"R Clearance at maximum height (extended) 6754 mm 22'2" 7238 mm 23'9"
Tires 20.5 R25 (L-3) XHA2 20.5 R25 (L-3) XHA2
PHB-Sec23(pg175-290).indd 217PHB-Sec23(pg175-290).indd 217 12/20/13 9:07 AM12/20/13 9:07 AM
23-218 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Dimensions● with Material Handling Arm
For IT14G2 machines equipped with 15.5-25 L-2 tires subtract 39 mm (1.5") from lift height — add 39 mm (1.5") for below ground measurements — add 42 mm (1.7") for all reach measurements.
MODEL IT14G2924K (LRC)*
StandardA Operating load (retracted) @ full articulation 1370 kg 3021 lb 1853 kg 4085 lbB Reach horizontal (retracted) 3179 mm 10'5" 3680 mm 12'0"C Operating load (mid-position) @ full articulation 1076 kg 2373 lb 1569 kg 3459 lbD Reach horizontal (mid-position) 4178 mm 13'8" 4480 mm 14'8"E Operating load (extended) @ full articulation 888 kg 1958 lb 1361 kg 2999 lbF Reach horizontal (extended) 5178 mm 17'0" 5280 mm 17'3"G Clearance horizontal 1585 mm 5'2" 1823 mm 5'11"H Reach full down (retracted) 1514 mm 4'11" 373 mm 1'2"J Reach full down (mid-position) 2116 mm 6'11" 411 mm 1'4"K Reach full down (extended) 2719 mm 8'11" 448 mm 1'5"L Clearance full down (retracted) 1874 mm 6'2" 2381 mm 7'9"M Clearance full down (mid-position) 2670 mm 8'9" 3180 mm 10'5"N Clearance full down (extended) 3468 mm 11'5" 3979 mm 13'0"P Reach at maximum height (retracted) 1402 mm 4'7" 2551 mm 8'4"Q Reach at maximum height (mid-position) 1962 mm 6'5" 3223 mm 10'6"R Reach at maximum height (extended) 2522 mm 8'2" 3896 mm 12'9"S Clearance at maximum height (retracted) 5185 mm 17'0" 5134 mm 16'10"T Clearance at maximum height (mid-position) 6012 mm 19'9" 5567 mm 18'3"U Clearance at maximum height (extended) 6840 mm 22'5" 6000 mm 19'8"
Tires 17.5R25 Michelin 20.5 R25 (L-3) XHA2*Hook On.
PHB-Sec23(pg175-290).indd 218PHB-Sec23(pg175-290).indd 218 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-219
Machine Dimensions● with Material Handling Arm
Wheel LoadersIntegrated Toolcarriers
MODEL930K (LRC)*
Standard938K (LRC)*
StandardA Rated operating load (retracted) @ full articulation 2135 kg 4706 lb 2482 kg 5472 lbB Reach horizontal (retracted) 3727 mm 12'2" 3775 mm 12'4"C Rated operating load (mid-position) @ full articulation 1811 kg 3992 lb 2109 kg 4649 lbD Reach horizontal (mid-position) 4527 mm 14'10" 4575 mm 15'0"E Rated operating load (extended) @ full articulation 1572 kg 3466 lb 1833 kg 4041 lbF Reach horizontal (extended) 5327 mm 17'5" 5376 mm 17'7"G Clearance horizontal 1854 mm 6'0" 1890 mm 6'2"H Reach full down (retracted) 1045 mm 3'5" 1089 mm 3'6"J Reach full down (mid-position) 1276 mm 4'2" 1324 mm 4'4"K Reach full down (extended) 1507 mm 4'11" 1559 mm 5'1"L Clearance full down (retracted) 2310 mm 7'6" 2316 mm 7'7"M Clearance full down (mid-position) 3076 mm 10'1" 3081 mm 10'1"N Clearance full down (extended) 3842 mm 12'7" 3846 mm 12'7"P Reach at maximum height (retracted) 2333 mm 7'7" 2362 mm 7'8"Q Reach at maximum height (mid-position) 2919 mm 9'6" 2943 mm 9'7"R Reach at maximum height (extended) 3505 mm 11'6" 3525 mm 11'6"S Clearance at maximum height (retracted) 5568 mm 18'3" 5655 mm 18'6"T Clearance at maximum height (mid-position) 6112 mm 20'0" 6204 mm 20'4"U Clearance at maximum height (extended) 6657 mm 21'10" 6754 mm 22'1"
PHB-Sec23(pg175-290).indd 219PHB-Sec23(pg175-290).indd 219 12/20/13 9:07 AM12/20/13 9:07 AM
23-220 Edition 44
SPECIFICATION DEFINITIONS FORFRONT END LOADERS
Cat wheel and track loader specifications conform to Society of Automotive Engineers (SAE) definitions as expressed in standards J732 (JUN92), as follows:
Description of Specification MachineOn wheel loaders the tire inflation pressure at which
spec i fications are taken must be described in addition to the current written basic machine descrip tion. On track loaders the type of grouser must be specified.
Hydraulic Cycle Timesa. “Raise Time’’ — Time in seconds required to raise
the bucket from level position on the ground.b. “Lower Time’’ — Time in seconds required to
lower the empty bucket from the full height to a level position on the ground.
c. “Dump Time’’ — Time in seconds required to move the bucket at maximum height from the max i mum rollback position to full dump position while dump-ing the SAE loose material operating load.
Breakout Force“Breakout force,’’ pounds (and kilonewtons or kilo-
grams) — the maximum sustained vertical upward force exerted 100 mm (4") behind the tip of the bucket cutting edge and achieved through the ability to lift and/or roll-back about the specified pivot point under the following conditions:
a. Loader on a hard level surface with transmission in neutral.
b. All brakes released.c. Unit at standard operating weight — rear of loader
not tied down.d. Bottom of cutting edge parallel to and not more
than 20 mm (0.75") above or below the ground line.
e. When bucket circuit is used the pivot point must be specified as the bucket hinge pin, and the unit blocked under the bucket hinge pin pivot point in order to minimize linkage movement.
f. When the lift circuit is used, the pivot point must be specified as the lift arm hinge pin. Wheel load ers shall have front axle blocked to eliminate change in position of pivot pins due to tire deflection.
g. If both circuits are used simultaneously, the domi-nating pivot point listed in (e) or (f) must be specified.
h. If the circuit used causes the rear of the vehicle to leave the ground, then the vertical force value required to raise the rear of the vehicle is the breakout force.
i. For irregular shaped buckets, the tip of the bucket cutting edge referred to above shall mean the far-ther forward point of the cutting edge.
The following are illustrations used (according to provi-sions of SAE J732 JUN92) to measure Cat Loader break-out forces.
a. Breakout force resulting from rackback:(Tilt Force) × (Dist. “X’’) = (“Y’’ Dist.) × (Breakout Force)
(Tilt Force) × (Dist. “X’’) = Breakout Force
“Y’’ Dist.
TRACKWHEEL
BREAKOUT FORCE
BREAKOUT FORCE
TILT FORCE
TILT FORCE
Wheel LoadersIntegrated Toolcarriers
SAE Loader Ratings
PHB-Sec23(pg175-290).indd 220PHB-Sec23(pg175-290).indd 220 12/20/13 9:07 AM12/20/13 9:07 AM
Static Tipping LoadThe minimum weight at center of gravity of “SAE
Rated’’ load in bucket which will rotate rear of machine to a point where, on track loaders, front rollers are clear of the track and on wheel loaders, rear wheels are clear of the ground under the following conditions:
a. Loader on hard level surface and stationary.b. Unit at standard operating weight.c. Bucket at maximum rollback position.d. Load at maximum forward position during rais-
ing cycle.e. For articulated wheel loaders, the test will be run
both with frame straight (straight static tipping load) and fully turned to a specific angle (full turn static tipping load).
f. Unit with standard equipment as described in spec-i fi cations unless otherwise noted under the heading.
Operating LoadIn order to comply with SAE standard J818 MAY87,
the operating load of Wheel Loaders should not exceed 50% of the full turn Static Tipping load of the machine when equipped with attachments needed for the job. (For track loaders, operating load should not exceed 35% of the Static Tipping load rating.) See “Perfor mance Data’’ of each machine in this handbook for increases to static tipping load by adding cab, counter weights, ripper-scar ifier, etc.
The SAE operating load is not an indication of a wheel loader’s rated payload. It takes into consider ation only hydraulic lift and tipping capacity. There is no regard to structural and/or component lives, and for wheel loaders is measured on hard, moderately smooth and level operating surfaces.
Carry PositionSAE defines carry positions as: “The vertical distance
from the ground to the center line of the bucket hinge pin, with the angle of approach at 15°.’’ The sketch below illustrates this definition:
Loader Clearance CircleSAE J732 JUN92 states that “minimum turning radius
(over tire)’’ and “loader clearance circle’’ should be given for wheel loaders. Both are given on Cat specification sheets, including loader clearance circles for all available buckets for each machine.
Digging DepthJ732 JUN92 specifies digging depth as “the vertical
distance in mm (inches) from the ground line to the bot-tom of the bucket cutting edge at the lowest position with the bucket cutting edge horizontal.’’
LINKAGE WT.
LINKAGE WT.
BREAKOUTFORCE
BREAKOUTFORCE
LIFT FORCE
LIFT FORCE
LAST POINT OF WHEEL OR TRACK
CONTACT
CARRY HEIGHT
PHB-Sec23(pg175-290).indd 221PHB-Sec23(pg175-290).indd 221 12/20/13 9:07 AM12/20/13 9:07 AM
23-222 Edition 44
Wheel LoadersIntegrated Toolcarriers
SAE Loader RatingsMachine Selection● Cycle Time Factors
SAE BUCKET RATING
SAE Bucket CapacitiesStruck capacity is that volume contained in a bucket
after a load is leveled by drawing a straight edge resting on the cutting edge and the back of the bucket.
Heaped capacity is a struck capacity plus that addi-tional material that would heap on the struck load at a 2:1 angle of repose with the struck line parallel to the ground.
SAE J742 (FEB85) specifies that the addition of any auxiliary spill guard to protect against spillage which might injure the operator will not be included in bucket capacity ratings. Buckets with irregular shaped cutting edges (vee edge) the strike plane should be drawn at one-third the distance of the protruding portion of the cutting edge. Cat rock buckets are built with integral see-through rock guards. Cat light material buckets come standard with bolt-on edges. These fea tures which add to actual bucket capacity are included in published ratings.
Dump HeightSAE J732 JUN92 specifies that dump height is the
ver tical distance from the ground to the lowest point of the cutting edge with the bucket hinge pin at maximum height and the bucket at a 45° dump angle. Dump angle is the angle in degrees that the longest flat section of the inside bottom of the bucket will rotate below horizontal.
SELECTING A MACHINE
Steps in selecting the proper size loader:1. Determine production required or desired.2. Determine loader cycle time and cycles per hour. A
machine size must be assumed to select a basic cycle time.
3. Determine required payload per cycle in loose cubic yards and pounds (meters and kilograms).
4. Determine bucket size needed.5. Make machine selection using bucket size and pay-
load as criteria to meet production requirements.6. Compare the loader cycle time used in calculations
to the cycle time of the machine selected. If there is a difference, rework the process beginning at step 2.
1. Production RequiredThe production required of a wheel or track loader
should be slightly greater than the production capability of the other critical units in the earth or material moving system. For example, if a hopper can handle 300 tons per hour, a loader capable of slightly more than 300 tons should be used. Required production should be carefully calculated so the proper machine and bucket selections are made.
2. Loader Cycle TimesWhen hauling loose granular material on a hard smooth
operating surface, a .45-.55 minute basic cycle time is considered reasonable for Cat articulated loaders with a competent operator. This includes load, dump, four rever-sals of direction, full cycle of hydraulics and mini mum travel.
Material type, pile height, and other factors may improve or reduce production, and should be added to or sub-tracted from the basic cycle time when applicable.
When hauls are involved, obtain the haul and return portion of the cycle from the estimated travel chart (this section). Add the haul and return times to the estimated basic cycle time to obtain total cycle time.
CYCLE TIME FACTORSA basic cycle time (Load, Dump, Maneuver) of .45-
.55 min utes is average for an articulated loader [the basic cycle for large loaders, 3 m3 (4 yd3) and up, can be slightly longer], but variations can be anticipated in the field. The following values for many variable elements are based on normal operations. Adding or subtracting any of the variable times will give the total basic cycle time.
STRUCK
HEAPED
PHB-Sec23(pg175-290).indd 222PHB-Sec23(pg175-290).indd 222 12/20/13 9:07 AM12/20/13 9:07 AM
and loaders . . . . . . . . . . . . . . . . . . . Up to –.04— Independently owned trucks . . . . . Up to +.04— Constant operation . . . . . . . . . . . . . Up to –.04— Inconsistent operation . . . . . . . . . . Up to +.04— Small target . . . . . . . . . . . . . . . . . . . Up to +.04— Fragile target . . . . . . . . . . . . . . . . . . Up to +.05Using actual job conditions and the above factors,
total cycle time can be estimated. Convert total cycle time to cycles per hour.
Cycles per hour at 100% Efficiency =
60 min
Total Cycle Time in Minutes
Job efficiency is an important factor in machine selec-tion. Efficiency is the actual number of minutes worked during an hour. Job efficiency accounts for bathroom breaks and other work interruptions.
Cycles per hour at 50 minutes per hour(83% efficiency)
3. Required Payload Per CycleRequired payload per cycle is determined by divid ing
required hourly production by the number of cycles per hour.
4. Bucket SelectionAfter required payload per cycle has been calculated,
the payload should be divided by the loose cubic yard (meter) material weight to determine number of loose cubic yards (meters) required per cycle.
The bulk of material handled does not weigh 1800 kg/m3 (3000 lb/yd3), so a reasonable knowledge of material weight is necessary for accurate production estimates. The Tables Section has average weight for certain mate-rials when actual weights are not known.
The percentage of rated capacity a bucket carries in var-ious materials is estimated below. The bucket size required to handle the required volume per cycle is found with the aid of the percentage of rated bucket capacity called “Bucket Fill Factor.’’
The bucket size needed is determined by dividing loose cubic meters (or yards) required per cycle by the bucket fill factor.
Bucket size =Volume Required/Cycle
Bucket Fill Factor
BUCKET FILL FACTORSThe following indicates the approximate amounts of
material as a percent of rated bucket capacity which will actually be delivered per bucket per cycle. This is known as “Bucket Fill Factor.’’
Loose Material Fill factorMixed moist aggregates . . . . . . . . . . . . . . . 95-100%Uniform aggregates up to 3 mm (1/8 in) . . 95-100%3 mm (1/8 in) to 9 mm (3/8 in) . . . . . . . . . . 90-95%12 mm (1/2 in) to 20 mm (3/4 in) . . . . . . . . 85-90%24 mm (1.0 in) and over . . . . . . . . . . . . . . . 85-90%
PHB-Sec23(pg175-290).indd 223PHB-Sec23(pg175-290).indd 223 12/20/13 9:07 AM12/20/13 9:07 AM
23-224 Edition 44
Wheel LoadersIntegrated Toolcarriers
Machine Selection● Bucket Fill Factors● Example Problem
NOTE: Fill factors on wheel loaders are affected by bucket penetration, breakout force, rackback angle, bucket profile and ground engaging tools such as bucket teeth or bolt-on replace able cut-ting edges.
Example:
12 mm (1/2 in) material and 3 m3 (4 yd3) bucket.0.90 × 3 m3 = 2.75 Loose m3 delivered per cycle.0.90 × 4 yd3 = 3.6 Loose yd3 delivered per cycle.
NOTE: Check the static tipping load on the specific machine to determine if bucket load is in fact a safe operating load.
Bucket Selection
Tons Required/Cycle =Tons Required/Hour
Cycles/Hour
Kg (Pounds) Required/Cycle = Tons Required/Cycle
× 907 kg (2000 lb)
Volume Required/Cycle =
kg (Pounds) CycleMaterial Weight
kg/m3 (lb/yd3)Always select a machine with a greater capacity than
the calculated required operating capacity. For most applications, payload above recommended and exces-sive counterweight can hinder machine performance and reduce dynamic stability and machine life.
For optimum performance in fast cycling situations such as truck loading, operating loads should not exceed the recommended capacity. To provide extra stability, calcium chloride (CaCl2) ballast may be desired when operating at recommended operating load, see SAE Loader rating pages in this section. For specific stability data and optional tire sizes, see the “Performance Data’’ pages in this section.
When selecting special application buckets, such as multi-purpose and side dump the additional bucket weight must be deducted from recommended capacity.
Specific circumstances may involve other conditions which would also affect loader capacity. Because of the greatly varied applications and conditions, your Cat dealer should be contacted for guidance.
Example problem:
JOB CONDITIONSApplication Truck loadingProduction Required 450 metric ton (496 Tons)
per hourMaterial 9 mm (3/8") gravel in 6 m
(20 ft) high stockpileDensity 1660 kg/m3 (2800 lb/yd3)Trucks are 6-9 m3 (8-12 yd3) capacity and are owned by three contractors. Loading is constant. Hard level surface for loader maneuvering.
1. PRODUCTION REQUIRED: Given
2. CYCLE TIME: Assume loader size between 914G2 and 962H for initial choice of basic cycle.
(Refer to Cycle Time Factors in this section)Independent trucks .04 minBasic Cycle .50 minMaterial –.02 minIndependent trucks +.04 minConstant operation –.02 min
Total Cycle .50 min
NOTE: Load and carry times not required in total cycle.
Cycles/hr at 83% efficiency
= 120 cycles/hr ×50 min actual
work time60 min per hr
= 100 cycles/hr
3. VOLUME REQUIRED PER CYCLE (Density in tons) Density in this example was given. When not given,
refer to Tables Section to obtain an estimated density for the material being handled.
Metric:1660 kg/m3
= 1.66 ton/m3
1000 kg/ton
English:2800 lb/yd3
= 1.4 tons/yd3
2000 lb/ton
PHB-Sec23(pg175-290).indd 224PHB-Sec23(pg175-290).indd 224 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-225
Machine Selection● Example Problem
● Alternative Method
Wheel LoadersIntegrated Toolcarriers
Production Rate Required
Metric:450 tons/hr
= 271 m3/hr1.66 tons/m3
English:496 tons/hr
= 354 yd3/hr1.4 tons/yd3
Volume Required per Cycle
Metric:271 m3/hr
= 2.71 m3/cycle100 cycles/hr
English:354 yd3/hr
= 3.54 yd3/cycle100 cycles/hr
4. DETERMINE BUCKET SIZE
BUCKET FILL FACTORThe volume of material required per cycle has been
determined. Because of varying material fill factors, buckets do not always carry their rated load, a larger capacity bucket may be needed to carry the volume required. For fill factors, refer to Bucket Fill Factor Chart in this section.
One half of full turn static tipping load for the 950H with a 2.9 m3 (3.75 yd3) General Purpose Bucket is 5410 kg (11,925 lb). SAE criteria is satisfied.
● ● ●
An Alternative Method of Machine Selection
Another method of selecting the right Wheel Loader and bucket to meet production requirements is by use of the nomographs on the following pages. The method is quicker and easier than the preceding example because it does not require as many calculations, yet the accuracy is about the same within the normal limits of input data.
Be careful when entering and reading data from the nomographs because some scales increase from bottom to top, while others are the reverse. Do not be overly con-cerned with the precision as affected by pen cil line width or reading to the hundredth of a m3 (yd3). Remember that bucket fill factor, material density and cycle time are at best close estimates.
Example problem:
A Wheel Loader must produce 230 m3 (300 yd3) per hour in a truck loading application. Estimated cycle time is .6 minutes, working 45 minutes per hour. Bucket fill factor is 95% and material density is 1780 kg/m3 (3000 lb/yd3).
Determine bucket size and machine model.Solution:
At full efficiency, the Wheel Loader will cycle 100 times per hour. Since only an average of 45 minutes are avail-able, only 75 cycles will be completed.
Starting on Scale A at 75 cycles per hour draw a straight line intersecting 230 m3/hr (300 yd3/hr) on Scale B and extending it on to Scale C giving 3 m3/cycle (4 yd3/cycle) required payload. Follow solution steps 1-10.
PHB-Sec23(pg175-290).indd 225PHB-Sec23(pg175-290).indd 225 12/20/13 9:07 AM12/20/13 9:07 AM
23-226 Edition 44
Wheel LoadersIntegrated Toolcarriers
Production and Machine Selection Nomograph● To find required bucket payload and bucket size
1. Enter required hourly production on Scale B 230 m3/hr (300 yd3/hr).
2. Enter cycles per hour on Scale A (60 ÷ .6 = 100 × .75 = 75 cycles/hr).
3. Connect A through B to C. This shows a required pay load of 3 m3 (4 yd3) per cycle.
4. Enter estimated bucket fill factor on Scale D (0.95).
5. Connect C through Scale D to E for required bucket size 3 m3 (4 yd3).
6. Transfer cycles per hour Scale A and required pay-load Scale C to the following page.
m3/cycle yd3/cycle
m3/hr yd3/hr
m3 yd3
A B C D ECycles
per hourHourly
Production Volume
Required Payload Volume
Bucket Fill Factor
Required Bucket
PHB-Sec23(pg175-290).indd 226PHB-Sec23(pg175-290).indd 226 12/20/13 9:07 AM12/20/13 9:07 AM
23
Edition 44 23-227
Production and Machine Selection Nomograph● To find payload weight and tons per hour
Wheel LoadersIntegrated Toolcarriers
7. Enter material density on Scale F 1780 kg/m3 (3000 lb/yd3).
8. Connect C through Scale F to Scale G to give pay-load weight per cycle 5300 kg (11,500 lb).
9. Compare Scale G quantity 5300 kg (11,500 lb) with recommended machine working range listed on the following bucket selection pages.
Operating capacity for the 950H with 3.1 m3 (4 yd3) bucket is dependent on material density and bucket capacity (see bucket selection pages that follow).
10. For hourly tonnage, draw a straight line from Scale G through Scale A to Scale I 400 metric tons (450 U.S. tons).
C F G A IRequired Payload Volume
Material Density
Bucket Payload
Weight per cycle
Cycles/hr Tons per Hour
kg/cycle
Metric Tons
lb/cycle
U.S.Short Tons
m3/cycle yd3/cycle
kg/m3 lb/yd3
PHB-Sec23(pg175-290).indd 227PHB-Sec23(pg175-290).indd 227 12/20/13 9:07 AM12/20/13 9:07 AM