West 11 2013

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® WesternEdition

$3.00

Holt CAT Celebrates

Warriors Weekend...8

Wheeler Employees Travel,

Battle Poverty...10

Inside

A portion of the Interstate 5 bridge is submerged after it collapsed into the Skagit River,dumping vehicles and people into the water in Mount Vernon, Wash., May 23, according tothe Washington State Patrol.

By Mike Baker and Manuel ValdesASSOCIATED PRESS

SEATTLE (AP) Washington state plansto install within weeks a temporary fix foran interstate highway bridge that crumpledafter being hit by a truck, tossing cars andpeople into a chilly river but causing onlyminor injuries. Gov. Jay Inslee announced May 26 that

the temporary spans for the Interstate 5bridge will be installed across the SkagitRiver by around mid-June, if plans go well. Barges with equipment to remove the

mangled bridge and cars in the waterarrived at the site and work was expected tostart during the early hours of May 27, thestate Department of Transportation said. The announcement came as investigators

used 3D laser scans to study what remainedof the collapsed bridge.

Temporary Fix Set for Crumpled I-5 Bridge

see BRIDGE page 32

By Nedra PicklerASSOCIATED PRESS

MOORE, Oklahoma (AP)President Barack Obama visited tor-nado-devastated Moore, Okla., con-soling people staggered by the loss oflife and property and promising that

the government will be behind them“every step of the way.”The extraordinarily powerful

twister that struck Moore wasknown as an EF5, ranking it at thetop of the enhanced Fujita scale usedto measure tornado strength.

Obama Offers FederalSupport to Oklahoma

see TORNADO page 52

June 1, 2013 • Vol. IX • No.11 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

www.constructionequipmentguide.comPublished Nationally

The equipment rentalindustry in the UnitedStates is expected to gener-ate $33.6 billion in revenuein 2013, according to theAmerican RentalAssociation’s (ARA) latestforecast from the ARA

Rental Market Monitorupdated in May. This fig-ure represents a 7.3 percentincrease over 2012 withrevenue growth reaching7.9 percent in the fourthquarter according to thelatest quarterly forecast.

In the United States, theconstruction market andconsumer spending areexpected to be the mostimportant drivers ofgrowth of the equipmentrental market in 2013. “The U.S. equipment

rental market is expectedto continue its upward tra-jectory and show signifi-cant growth through 2017.Strong growth in real resi-dential constructionthrough 2015 will fuel theconstruction and industrial

equipment segment, whichis projected to grow 9.8percent in 2014 and 11.8percent in 2015,” accord-ing to the U.S. economicanalysis from the ARARental Market Monitor.

Equipment Rental Revenue to Top $38B in 2013

see REVENUE page 52

Michael Tackett pushes tornado debris to the curb as hehelps clean up the home of Brian McAlister, May 26, inMoore, Okla. Cleanup continues after a huge tornadoroared through the Oklahoma City suburb May 20, flat-tening a wide swath of homes and businesses.

(AP Photo/Charlie Riedel)

(AP Photo/Skagit ValleyHerald, Frank Varga)

RDO Attracts Guests With

Total Solutions Clinics...18

Table of Contents ..................4

Attachment & Parts Section ............................................ 11-15

Truck & Trailer Section ......................................................25-27

Recycling Section............33-43

Auction Section ..............47-55

Business Calendar ................50

Advertisers Index ................54

Page 2 • June 1, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive

hardware needed• No more rags

stuffed into hoses• No more messy

plastic caps• The ultimate

contamination control tool• One hand installation• Eliminate hydraulic

oil spills & clean up• Quick installation

& ease of usage• Safe for personnel

& environment• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com

740 CHASSIS warranty available thru CAT® NetworkINCREASES COMBINATION of comfort, speed & maneuverabilityMORE DURABLE and longer life than Ag tractors

ELKADER, IOWA | 563-245-6871 | www.mobiletracksolutions.com

NEW

Komatsu Distributor

ContactAllen Stokke

Used Equipment Manager866-400-5250

[email protected]

www.roadmachinery.com/equipmentWirtgen • Hamm • Vogele • Kleemann • Finn • Terex-Fuch

Crawler Dozers

KOMATSU D65EX-15EO, 2008, EMD7946, 3859 Hrs ......................................................CALL

KOMATSU D155AX-6, 2007, EMD9045, 6596 Hrs ............................................................CALL

KOMATSU D51EX-22, 2007, EMD7022, 2874 Hrs ......................................................$119,000

KOMATSU D39EX-22, 2011, EMD6862, 601 Hrs ..............................................................CALL

KOMATSU D51EX-22, 2011, EMD7201, 725 Hrs ..............................................................CALL

Hydraulic Excavators

KOMATSU PC400LC-7L, 2005, EMD247, 6288 Hrs ....................................................$165,000

KOMATSU PC400LC-7L, 2004, EMD249, 6501 Hrs ....................................................$135,000

KOMATSU PC200LC08, 2008, EMD9057, 2391 Hrs ........................................................CALL

KOMATSU PC290LC-10, 2011, EMD8116, 517 Hrs ..........................................................CALL

KOMATSU HB215LC-1, 2011, EMD7061, 239 Hrs ............................................................CALL

KOMATSU PC200LC-8, 2010, EMD7124, 1123 Hrs ....................................................$135,000

KOMATSU PC300LC-7EO, 2007, EMD252, 4775 Hrs ................................................$175,000

Wheel Loaders

KOMATSU WA320-5L, 2004, EMD7694, 2638 Hrs............................................................CALL

KOMATSU WA500-6, 2007, EMD7624, 7122 Hrs ........................................................$249,000

KOMATSU WA450-3, 2000, EMD8295, 6514 Hrs ..........................................................$92,500

KOMATSU WA470-6, 2011, EMD7024, 851 Hrs ................................................................CALL

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 1, 2013 • Page 3

2007 Ditch Witch RT40, Stk# 8407, OROPS,1190 Hrs, 12” Trench, Slide Boom Shift, 4WB,64” Blade, 26x12.00x12 Tires, 3 Cyl. Deutz Eng......................................................................$15,500

2005 Kubota KX41-2, Stk# 8636, 2,869 Hrs;OROPS, 11" Bucket, 40" Front Blade, 9" RubberTracks, Aux. Hyd., 3 Cyl. Kubota Eng ....$12,500

2006 Terex TH636C, Stk# 8563, 6,000 lbs., 36ft., 4WD, 4WS, 2,268 hrs., 48" Forks, 74" Frame,13.00x24 Foam Filled Tires, Hyd. Self LeveingSystem, 4 Cyl. JD Eng..........................$28,500

2007 Genie GTH844, Stk# 7939, 8000 Lbs, 44’,4WS, 5787 Hrs, 60% Tires, 48” Forks, 61” Frame,13.00x24 Hard Rubber Tires.....................$32,500

2007 Skytrak 10054, Stk# 8692, 10,000 lbs., 54ft., 4WD, 4WS, 3,375 hrs., 48" Forks, 62" Frame,Aux. Hyd., Hyd Self Leveling System, 17.5x25Lx2Foam Filled Tires ..................................$56,500

2005 Genie S40, Stk# 8532, 40 ft., 4 WD, 2,864hrs., 12x16.5 Tires, 3 Cyl. Deutz Eng........$24,500

2006 Terex TH844C, Stk# 8561, 8,000 lbs., 44 ft.,4WD, 4WS, 1,978 hrs., Hyd. Self Leveing System,14.00x24 Tires, 48" Forks, 74" Frame .....$31,500

2007 Ditch Witch RT40, Stk# 8407, OROPS,1,190 hrs., 12" Trench, Slide Boom Shift, 4WB,64" Blade, 26x12.00x12 Tires, 3 Cyl. Duetz Eng ..............................................................$15,500

2009 Cat 324DL, Stk# 8668, EROPS, A/C, 2,816hrs., 42" Bucket, 32" Pads ..................$129,500

2007 Genie GTH1056, Stk# 8348, 10,000 lbs.,56 ft., 4WD, 4WS, 4,071 hrs., 48" Forks, 62" TiltFrame, 14.00x24 Foam Filled Tires, Hyd. SelfLeveling System, Front StabIlizers, 4 Cyl. JD Eng..............................................................$38,500

2008 Volvo ECR235CL, Stk# 8648, 1,964 Hrs;148 hp; EROPS, A/C & Heat, FM Stereo, 70%U/C, Aux. Hyd., 32" Pads, 10' 6" Wide, ShinnSystems, Forestry Package ..............$249,500

2008 Cat 312DL, Stk# 8574, EROPS, A/C &Heat, 5,353 hrs., 34" Bucket, 28" Pads, Aux.Hyd., 8' 11" Wide....................................$64,500

2010 Cat D3K LGP, Stk# 8677, OROPS, 6 WayBlade, 2,153 hrs., 25" Pad, 10' 3" Blade.$59,500

2008 Cat D5K XL, Stk# 8386, OROPS, 6 WayBlade, 3,516 hrs., 20" Pads, 9' 6" Wide $62,500

2012 Cat 252B, Stk# 8613, Like New: EROPS,A/C, 32 hrs., 73" Bucket, Aux. Hyd., 12x16.5Tires, 4 Cyl. Cat Eng ...............................$38,500

2012 Doosan DX225LC, Stk# 8667, New, EROPS,A/C, FM Stereo, 18 hrs., 45" Bucket, 32" Pads, 5Cyl. Doosan Eng., 10' 6" Wide ................$139,500

2012 Cat D6T XL, Stk# 8671, EROPS, A/C, FMStereo, Sweeps, Rear Screen, SU Blade w/Tilt,1,042 hrs., D6MS Rear Ripper S# 1EH05793, 24"Pads, 10' 7" Blade ...................................$289,500

2007 Kobelco SK330LC, Stk# 8633, EROPS, A/C,7688 Hrs w/Genesis 500 Metal Shear, 32” Pads,Aux. Hyd, 6 Cyl. Mits. Eng. 11’2” Wide ..$119,500

2009 Cat 320D LRR, Stk# 8537, EROPS, A/C,3,954 hrs., 80% U/C, 46" Bucket, 32" Pads, 10' 5" Wide ........................................$109,000

2011 Cat D6N XL, Stk# 8628, EROPS, A/C,Sweeps, Rear Screen, 6 Way Blade, Paccar Pass-D00110E Winch #110511, 24" Pads, 10' 7" Blade............................................................$229,500

2009 Cat D5K LGP, Stk# 8262, EROPS, A/C,Sweeps, 6 Way Blade, 2,822 hrs., 26" Pads, 10'6" Blade ................................................$89,500

2006 John Deere 650J LGP, Stk# 8404, HYSTAT,OROPS, Eng. Encl., 6 Way Blade, 5,109 hrs.,70% U/C, 28" Pads, 10' 9" Blade ..........$38,500

2012 John Deere 850K WLT, Stk# 8644, EROPS,A/C & Heater, 6-Way Blade, 1983 Hrs, 60% U/C,Ripper, 30” Pads, 13’1” Blade ..............$249,500

2007 Ingersoll-Rand SD45, Stk# 8313, 54"Smooth Drum w/Pad Drum Shell Kit, 652 hrs.,12.4x24 Tires, 4 Cyl. Cummins Eng ....$29,500

2009 Cat D6K LGP, Stk# 8609, OROPS, 6 WayBlade, 80% U/C, 2,879 hrs., 30" Pads, 6 Cyl.Cat Eng., 11 ft. Wide ............................$96,500

2012 Cat D6T LGP, Stk# 8586, Like New:EROPS, A/C & Heat, Sweeps, Screens, St/TiltBlade, 202 hrs., 3rd Valve, Paccar PA56 Winch s# 1102336, 36" Pads, 13' 4" Blade....$349,500

2004 Ingersoll-Rand SD105F, Stk# 8604, 84"Pad Drum, 479 hrs., 90% Tires, 23.1x26 Tires, 4 Cyl. Cummins Eng...............................$52,500

1998 Shuttle Lift 3330ELB, Stk# 8649, EROPS,17,000 lbs., 1,982 hrs., 10.00x15 Tires, 4 Cyl.Cummins Eng., 80" Wide ......................$26,500

2004 John Deere 650H, Stk# 8521, EROPS, A/C,8337 Hrs, 80% U/C, 9’6” Wide, 24” Pads, 6-WayBlade, JD Eng............................................$36,500

2006 John Deere 650J LGP, Stk# 8137, EROPS,A/C, FM Stereo, Forestry Package, 6-Way Blade,4725 Hrs, 10’9” Blade ..........................$59,500

2006 Ditch Witch HT25, Stk# 8544, OROPS,2,927 hrs., 6" Trench, 12" Bucket, 36" Blade, 9"Rubber Tracks, 3 Cyl. Kubota Eng. ........$13,500

2005 Ingersoll-Rand SD70D TF, Stk# 8580,OROPS, 66 Smooth Drum w/Pad Drum ShellKit,1,544 hrs., 14.9x24 Tires, 4 Cyl. Cummins Eng. ................................................................$38,500

2007 John Deere 310J, Stk# 8673, OROPS,4WD, 3,071 hrs., 24" Bucket & Hyd. Thumb, 2Stick Controls, 12x16.5 Front Tires, 19.5Lx24Rear Tires, 4 Cyl. JD Eng ......................$38,500

"In Business for over 31 Years"www.hendrixmachineryllc.com

1-936-327-5430 • Email: [email protected] Se HablaEspañol

2007 Komatsu PC200 LC-8, Stk# 8603, 6,314hrs; EROPS, A/C, 48" Bucket, 70% U/C, 32" Pads,6 Cyl. Komatsu Eng., 10' 6" Wide ...........$79,500

2010 Komatsu WA250-6, Stk# 8454, EROPS,A/C, 8335 Hrs, 70% Tires, 23.1x26 Tires, 8’7”Bkt, 10’9” Height, 8’9” Width .................$79,500

2008 Cat CP433E, Stk# 8620, 66" Pad Drum w/7 ft. Blade, 701 hrs., 14.9x24 Tires @ 80%Rubber, 4 Cyl. Cat Eng............................$46,500

2004 Skytrak 10054, Stk# 8513, 10,000 lbs., 54ft., 4WD, 4WS, 4,335 hrs., Aux. Hyd., 17.5x25Foam Filled Tires, 60" Forks, 72" Frame, 4 Cyl.Cummins Eng.........................................$56,500


WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada •Oklahoma

• Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.

Editor In Chief Craig Mongeau Associate Editor Christine Reckner

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900

Toll Free 800/523-2200 Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates: Contact Edwin M. McKeon Jr.National Sales Manager

215/885-2900Toll Free 800/523-2200

Fax 215/885-2910e-mail [email protected]

Contact Dale Agnew• Arizona • Colorado • New Mexico • Oklahoma

• Texas • Wyoming

Toll Free 877/877-4997 Fax 972/695-6049

e-mail [email protected]

Contact Frank Strazzulla• Alaska • California • Hawaii • Nevada • Oregon• Utah • Washington

949/459-1767Fax 949/203-2859


Contact Patrick Kiel• Idaho • Montana

Toll Free 866/413-4265Fax 952/353-2750


Construction Equipment Guide Western Edition is published bi-weekly by Construction Equipment Guide Ltd.Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Application to mail at periodicals postage prices is pending at Ft. Washington, PA and at additional mailing offices.POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft.Washington, PA 19034.

Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.

IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…HYUNDAI TAPS LEE SHIREY AS REGIONAL SERVICE MANAGERHyundai Construction Equipment Americas Inc. has hired Lee Shirey asregional service manager. Shirey has more than 20 years of experience inthe heavy equipment industry.

HOLT CAT, WOUNDED WARRIORS CELEBRATEWARRIORS WEEKENDApproximately 700 wounded veterans from across the nation and theirfamily members were welcomed to Port O’Connor and Victoria, Texas, bylocal communities, businesses and volunteers.

WHEELER EMPLOYEES MAKE CHOICE TO ENDMEXICO’S POVERTYWhile in Tixmadeje, Wheeler employees and villagers worked side-by-sidebuilding cisterns for four of the village families. Cisterns are cylinder-shaped waterproof receptacles for harvesting rain water and protecting it from contamination.

RDO EQUIPMENT CO. HOSTS TOTAL SOLUTIONS ATINDIO, CALIF., LOCATIONFactory representatives and a John Deere Link specialist were on site toperform demonstrations on equipment, such as the 755 hp grinder.

STATE SENATE TARGETS NEVADA’S CONSTRUCTIONDEFECT LAWThe bill would define a constructional defect as a flaw that “presents anunreasonable risk of injury to a person or property.’’ It also would reducethe time in which lawsuits could be filed and remove attorney’s fees fromrecoverable damages.

RAM INC. HOSTS BLASTING, EXPLOSIVES TRAINING SEMINARRAM Inc.’s fall Blasting and Explosives Safety Training (BEST) Seminar, atwo-and-a-half day continuous education training session, will be held atthe South Dakota School of Mines in Rapid City, S.D., Sept. 4 to 6, 2013.

CASE SITEWATCH PROVIDES CUSTOMERS REAL-TIME DATAUsing a control module that integrates with the machine, SiteWatch sendsreal-time data to a user Web portal accessible from nearly anywhere in the world.

18

24

10

8

6

33

44 CLASSIFIEDS47 COMING AUCTIONS50 BUSINESS CALENDAR

EQUIPMENT…26 KENWORTH K270, K230 Cabovers34 CHICAGO PENUMATIC RX 30, RX 38 Hydraulic Breakers

8

10

18

50

33

50

52

® Mobile LinkedIn Facebook Twitter YouTube

To read these s tories and many more, vis it w w w .construct ionequipmentguide.com


2002 Caterpillar 769D; Cab/AC, 18:00-33 Tires, 2-To-Choose, 10,000 Hrs ....................................$269,500

2007 Tamrock Ranger 800-2; #81227, Cab/AC,CAT Engine, 4300 Hrs ........................$324,500

1999 Komatsu PC600LC-6; #91529, Cab/Heat,11’6” Arm, Aux Hyd, 36” Tracks, 9350 Hrs ......................................................................$99,500

2006 Komatsu WA600-3; #81553, Cab/AC, 8ydSpade Nose, 3400 Hrs ........................$399,500

2006 Komatsu WA500-6; #91775, Cab/AC,8.5yd Bkt, Ride Control, KOMTRAX, 14,100 Hrs............................................................$169,500

2001 Caterpillar 730; #91650, Cab/AC, 23.5-25Tires, 30-Ton Truck, 12,400 Hrs............$99,500

2008 Deere 350D LC; #91704, Cab/AC, QC, HydThumb, 3950 Hrs ................................$189,500

2004 Caterpillar 330C MH; #91094, ElevatedCab, 20kW Gen, 55’ Reach, 7550 Hrs $289,500

1998 Caterpillar D6M XL; #81916, Cab/AC, 24”Tracks, Semi-U Blade, Winch, 13,500 Hrs ........................................................................$99,500

Call Doug / Sam:(866) 485-7180


Surf theInternet to the News,Equipment and all theinformationyou need to

keep up with the

Constructionindustry

@www.construc-tionequipment-

guide.com

Visit www.sealsaver.com for more information or contact us at 1-800-683-5189

Exclusively manufactured by:

Fluid ControlServices, Inc.1155 Allgood Road • Suite 15

Marietta, GA 30062

1-800-683-5189Fax: 770-509-5832

The SEAL SAVER*WILL:

• Eliminate rod scoring

• Extend the life of cylinder seals

• Protect cylinders from the elements

• Prevent pitting due tochemical washes

• Reduce particle contamination of hydraulic systems

• Minimize dings and dents associated with

falling debris*Patented

Made inthe USA

SEAL SAVERhas proven effective in

Recycling, Construction,Mining, Rock Quarries, Waste

Management, Refineries, WoodProducts Processing, Steel

Mills and Hot Slag Industries.

To2

!morFFre sohoC

C LLLA AS)6688(

WWWW R

MA RO GUOD584 - 0817

BR DESU MOC

WWWW R.

BR DESU . MOC

Hyundai Construction Equipment Americas Inc. has hiredLee Shirey as regional service manager. Shirey has morethan 20 years of experience in the heavy equipment industry.Most recently, he was a field service technician at ASCConstruction Equipment in Buford, Ga. He held similar posi-tions at Nasser Heavy Equipment, Stafford Tractor Companyand METRAC, all located in Georgia.

In his new role at Hyundai Construction Equipment,Shirey will oversee the department that services Hyundai’sextensive dealer network.

“I look forward to improving the already stellar serviceHyundai provides its dealers, and assist our dealers in theirefforts to serve their Hyundai customers,” said Shirey.

For more information, call 877/509-2254 or visitwww.hceamericas.com.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

Hyundai Taps LeeShirey as RegionalService Manager

Hyundai has hired Lee Shirey as regional servicemanager.

Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

Scale......................................................................................$80

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80

Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80

Bantam Truck Mounted Crane, 1:50 Scale ..................$115

Bantam Truck Mounted Shovel, 1:50 Scale ....................$60

Bobcat A300 Skid Steer Loader, 1:25 Scale ..................$40

Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$30

Bobcat M400 Gold 50th Anniversary Skid Steer Loader,

1:25 Scale..........................................................................$25

Bobcat S175 Skid Steer Loader, 1:25 Scale ..................$45

Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer

Set, 1:50 Scale ..................................................................$60

Bobcat 743 Skid Steer Loader, 1:25 Scale ....................$40

Bobcat 773 50th Anniversary Skid Steer Loader, 1:25

Scale..................................................................................$25







Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65



Bobcat Versahandler Tool Carrier, 1:25 Scale ..............$50

Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50

Scale..................................................................................$80

Caterpillar Military D8R Track-Type Tractor, 1:50 Scale $60

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65

Caterpillar D6K Track-Type Tractor................................$60

Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100

Caterpillar 140M Motor Grader, 1:50 Scale ....................$85

Caterpillar M200 Cold Planer, 1:50 Scale ....................$110

Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$40

Caterpillar 247B3 Multi-Terrain Track Loader, 1:32 Scale ..

..........................................................................................$40

Caterpillar 374D L Excavator, 1:50 Scale ....................$150

Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$75

Caterpillar 980G Wheel Loader, 1:50 Scale ..................$80

Caterpillar 963D Track Loader, 1:50 Scale ....................$60

Doosan Moxy MT31 Articulated Truck ........................$100

Gehl 680 Compact Wheel Loader, 1:50 Scale ..............$45

Hamm 110 Asphalt Compactor w/ROPS, 1:50 Scale ....$70

Hamm 3307 Compact Roller, 1:34 Scale ........................$45

Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40

International "S" Series Dump Truck,1:25 Scale ........$125

International TD-15 Dozer, 1:50 Scale ............................$60

International TD-20E Dozer, 1:64 Scale..........................$24

International TD-25 Dozer, 1:50 Scale ............................$70

JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$85

John Deere 315 SJ Backhoe/Loader, 1:50 Scale ..........$45

John Deere 400D Articulated Truck, 1:50 Scale............$45

John Deere 872 GP Grader, 1:50 Scale ..........................$50

Komatsu D51 PX Dozer, 1:50 Scale................................$85

Komatsu D51 EX Dozer, 1:50 Scale................................$85

Komatsu D65PX-17 Dozer, 1:50 Scale............................$80

Komatsu D155 AX Dozer, 1:50 Scale..............................$85

Komatsu D375 Dozer, 1:50 Scale..................................$100

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

Komatsu HM250 Articulated Truck, 1:50 Scale ............$75

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40

Komatsu PC200 Excavator, 1:50 Scale ..........................$85

Komatsu PC360LC-10 Excavator, 1:50 Scale ................$90

Komatsu PC400 LC Excavator, 1:50 Scale ....................$85

Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40

Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40

Komatsu WA470 Wheel Loader, 1:50 Scale ..................$70



Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..

..........................................................................................$90

Liebherr PR764 Dozer, 1:50 Scale ................................$150

Link-Belt 80100 RTC, 1:50 Scale ..................................$185

Link-Belt 250 X Excavator, 1:50 Scale..........................$140

Link-Belt 210 X Excavator, 1:40 Scale............................$85

Mack Granite MP w/ Bottom Dump Trailer ....................$75

Northwest 25-D Shovel, 1:50 Scale ................................$60

Poclain TC45 Excavator, 1:50 Scale ............................$135

Terex AC100/4 All Terrain Crane, 1:50 Scale ..............$200

Terex TR60 Off-Highway Truck, 1:50 Scale..................$160

Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140

Vogele Vision 5200 Tracked Paver, 1:50 Scale............$125

Vogele 1900 Tracked Paver, 1:50 Scale ......................$125

Vogele 1803 Wheeled Paver, 1:50 Scale ......................$125

Vogele Super 700 Small Paver, 1:50 Scale ....................$75

Volvo L220G Wheel Loader, 1:50 Scale ......................$135

Volvo L150F Wheel Loader, 1:50 Scale ........................$100

Volvo L250G Wheel Loader, 1:50 Scale ......................$135

Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25

Volvo 6870 Wheeled Paver, 1:50 Scale ..........................$90

All New in Box

CALL Toll Free

800-523-2200Ext. 197

Collections Wanted, I Buy Collections Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Construction Equipment Scale Models Make

Great Father’s Day Gifts!

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale $225Bucyrus Erie 22B Cable Shovel, 1:50 Scale $225Hitachi ZX870 Excavator, 1:50 Scale $185


Construction Work Availability:Hottest, Coldest States for JobsEmployment in the con-

struction industry bottomedin 2011. Here’s a look at the10 states with the biggestpercentage gains anddeclines in constructionjobs since then.

The numbers reflect sea-sonally adjusted jobs in res-idential and non-residentialconstruction combined forMarch compared with thesame month in 2011.(Figures for home con-

struction jobs alone weren’tavailable.)

(This story also can befound on Construction

Equipment Guide’s Web siteat www.constructionequip-mentguide.com.)

States With SharpestIncreases in

Construction Jobs

1. North Dakota (32.8 percent) 2. Alaska (17.1 percent) 3. Utah (16.3 percent) 4. Wyoming (12.0 percent) 5. California (11.8 percent) 6. Arizona (11.0 percent) 7. Louisiana (9.8 percent) 8. Texas (9.8 percent) 9. West Virginia (9.7 percent) 10. Massachusetts (8.8 percent)

States With theSteepest Declines

1. Illinois (minus 6.6 percent) 2. Alabama (minus 5.2 percent) 3. Rhode Island

(minus 3.2 percent) 4. North Carolina

(minus 2.9 percent) 5. New Mexico

(minus 2.3 percent) 6. Georgia (minus 2.0 percent) 7. Montana (minus 1.8 percent) 8. Mississippi (minus 1.6 percent) 9. Arkansas (minus 1.5 percent) 10. Nevada (minus 1.1 percent)

Lakeside Location...

RDO Equipment Co. NamesMike Fenton New ManagerRDO Equipment Co. has

announced that Mike Fenton hasbeen named general manager of theorganization’s Lakeside location. Inthis role he will be responsible for alloperations in the organization’sLakeside store, which is one ofseven Southern California locations.Fenton previously worked at

Hertz Equipment Rental for nearly20 years in various positions, mostrecently branch manager of theCarson, Calif. location.“Mike’s strong background in the

equipment and rental industry willbe a benefit to our Lakeside locationand Southern California region,”said Dennis Howard, RDOEquipment Co. vice president ofSouthern Construction.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

RDO Equipment Co. has announced that MikeFenton has been named general manager of theorganization’s Lakeside location.

Holt CAT, Wounded Warriors Celebrate Warriors WeekendApproximately 700 wounded veter-

ans from across the nation and theirfamily members were welcomed toPort O’Connor and Victoria, Texas, bylocal communities, businesses and vol-unteers for the seventh annual deep seafishing event and barbecue to celebratethese heroes and their patriotism. Holt CAT, the Caterpillar equipment

and engine dealer for south, central,north and northeast Texas, and theCaterpillar North American hydraulicexcavator facility in Victoria, Texas, areproud sponsors of this annual event aspart of the company’s ongoing commit-ment to veterans and employees serv-ing in the United States military. The veterans arrived Saturday morn-

ing to a welcome rally before boardingboats to begin their fishing adventureand friendly “big catch” competition.In the evening, the warriors and theirfamilies were recognized for their out-standing contributions at a barbecuedinner and ceremony, where decoratedmilitary dignitaries addressed them. In honor of the heroes, the Warrior’s

Weekend “Field of Honor” will remain ondisplay until June 2, 2013, in Victoria, Texas,where more than 2,500 flags will honor the

sacrifices of the armed forces. “Warrior’s Weekend is about more than

fishing and having a good time — it’s abouttouching lives and making a difference,strengthening families, and honoring the

service and sacrifice of thewounded soldiers,” saidRon Kocian, president andfounder of WarriorsWeekend. “Caterpillar andHolt CAT have been, andcontinue to be, a mainstayof Warrior’s Weekend.What great communitypartners they are. We couldnot do this without theirgenerous contributions yearafter year.”

For the third year in arow, Caterpillar and HoltCAT supported Warrior’sWeekend by donating allthe equipment needed topower and cool the out-side event, including sev-eral Caterpillar Tier 4iXQ350 portable genera-tors and numerous 20 tonair conditioning units,along with other equip-

ment needs. Additionally, more than 80Caterpillar and Holt CAT employees donat-ed their time to the event, greeting theheroes, serving them meals, preparing carepackages, and more.

“We are honored to be able to supportWarrior’s Weekend as it is a reflection of ourCaterpillar values and our ongoing commit-ment to support American veterans andthose serving in the military,” said JohnJones, facility manager at the Caterpillarexcavator manufacturing facility in Victoria,Texas. “Supporting a cause as worthy asWarrior’s Weekend is the least that we cando to help the Victoria region honor thesebrave soldiers that have given so much pro-tecting our freedom.” The companies also employ a significant

number of veterans and have robust policiesin place to support those in the Guard orReserves. Both companies are committed tothe U.S. Chamber of Commerce’s “HiringOur Heroes” program. Given the unique skill-sets, discipline and

strong work ethic of soldiers returning todomestic opportunities, veterans are oftenhighly qualified candidates and fit well with-in the Holt CAT and Caterpillar work cul-tures. Currently, more than 17 percent ofHolt employees are veterans of the armedforces, and Caterpillar employs more than2,500 veterans.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Approximately 700wounded veteransfrom across the nationand their family mem-bers were welcomed toPort O’Connor andVictoria, Texas, bylocal communities, businesses and volunteers for the seventhannual deep sea fishing event and barbecue to celebratethese heroes and their patriotism.


See full inventory at: www.DarrEquipment.com

(817) 410-4800Loader Backhoes2006 JCB 214, 2,391 Hrs, CN, 4wd, E-Stick,

w 24” Bucket ..............(CC000037) $33,000

2006 JCB 214, 2,917 Hrs, CN, 4wd, E-Stick,

w 24” Bucket ..............(BB000037) $33,000

2006 JCB 214, 2,279 Hrs, Cab, 4wd, E-

Stick, w/ 24” Bucket....(FF000026) $33,000

2007 JCB 3C, 1,355 Hrs, CN, 4wd, E-Stick,

w 24” Bucket ..............(FF000211) $33,000

2008 JCB 3C, 1,051 Hrs, CN, 4wd, E-Stick,

w 24” Bucket ..............(90870582) $33,000

2007 JCB 3CX14, 1,680 Hrs, CN, 4wd, Wet

Kit, Std Stick ..............(90816565) $35,000

Skip Loader2006 JCB 3C LL, 213 Hrs, Box Blade, 4wd,w LP Box Scraper ......(00107179) $25,0002006 JCB 3C LL, 1,082 Hrs, CN, 4wd, w 6’Box Blade ....................(FF000122) $25,000

Excavators2006 JCB JS260, 3,508 Hrs, 57,500 # Cap,Thumb, with Bucket ..(AA002602) $80,000

Excavators - Mini2008 JCB 8040Z, 463 Hours........................

....................................(91084658) $29,500

2005 JCB 8018X, 545 Hrs, w/ 12” Bucket ..

....................................(90924825) $15,000

2007 JCB 8018X, 690 Hrs ..........................

....................................(90886770) $15,000

2008 JCB 8018X, 291 Hrs, Canopy, 9”

Rubber Tracks ............(90993138) $17,000

2008 JCB 8025Z, 498 Hrs, Canopy, 10”

Rubber Tracks ............(90923647) $17,000

2006 JCB 8027Z, 784 Hrs, Canopy, 10”

Rubber Tracks ............(90954077) $15,000

2006 JCB 8027Z, 632 Hrs, Canopy, 10”

Rubber Tracks ............(90949801) $15,000

2006 JCB 8027Z, 377 Hrs............................

....................................(90954074) $17,000

2008 JCB 8035Z, 829 Hrs, Cab, Rubber

Tracks, 12” Bucket ......(90886772) $25,000

2006 JCB 3C LL Skip Loaders, 213-1082 Hrs,Box Blade, 4wd ..............................$25,000 Ea.

2005-2008 JCB 8018X, 291-690 Hours, RubberTracks, 12” Bucket ..................$15,000-$17,000

2006 JCB 214, 1,051 to 2,799 Hours, CN, 4wd,E-Stick, with 24” Bucket ........................$33,000

2 F

or

Sale

3 F

or

Sale

3 F

or

Sale

350 Bank Street

Southlake, TX 76092

WE HAVE MOVED!!!We have outgrown our current location at 8231 John Carpenter Freewayand will be moving to:

Darr Equipment Co.350 Bank Street • Southlake, Texas 76092Office: (817) 410-4800 • Fax: (817) 410-4854

Please call or come by for all of your JCB Construction Equipment needs: Parts, Service,Sales and Rentals. This new location will enable Darr to better serve our customers!


Wheeler Employees Make CHOICE to End Mexico’s PovertyIn April, 14 Wheeler Machinery Co.

employees journeyed to the small mountainvillage of Tixmadeje in Mexico’s Acambayregion. Located at 9,200 ft., the village is ina remote location with little access to mod-ern amenities.

While in Tixmadeje, Wheeler employeesand villagers worked side-by-side buildingcisterns for four of the village families.Cisterns are cylinder-shaped waterproofreceptacles for harvesting rain water andprotecting it from contamination.Employees and villagers laid the founda-tions, bent and tied the wire and mixedcement to construct the cisterns.

Currently, there is no running water toTixmadeje. The local villagers along withgovernment assistance are working on apipeline to pump in water from a reservoir5 mi. away. While in Mexico, Wheeleremployees were able to help lay 1 mi. of the5 mi. of pipe needed to bring water to thevillage.

“I feel the water project will make such ahuge impact on their lives. It will save themso much time giving them time to work onprojects to earn money to feed their fami-lies. I left part of my heart in that little vil-lage,” said Susan Anderson of WheelerMachinery Co.’s parts department.

Lack of water is undoubtedly the mostsignificant barrier to economic success inthe Acambay region. The cisterns will notonly provide water for household use butwill allow for increased animal husbandryand livestock cooperatives.

Kathy James, Wheeler’s sales officemanager said, “The villagers want a betterlife for their families and with CHOICE thisis possible which gives the villagers hopethat their dreams and needs can come true.”

$108,538 has been raised in 9 months viaWheeler employee payroll contributionsand a generous 2-to-1 company match.When the corporate partnership launched,the goal was to raise $50,000. If the goalwas met, Wheeler committed to sending agroup of employees on a fully-fundedhumanitarian expedition including cover-ing each participant’s vacation pay.Wheeler will continue to send a group ofemployees on a CHOICE humanitarianexpedition each year if the goal of raising$50,000 is reached annually.

“Without the support from our corporatepartners, the work of CHOICEHumanitarian wouldn't be possible,” saidLeah Barker, CEO of CHOICE. “We arereally excited about the impact Wheeler andCHOICE is making together. Thousands oflives are changing for the better.”


Wheeler employee payroll contributions and a generoustwo-to-one company match have raised $108,538 in ninemonths.

While in Tixmadeje, Wheeler employees and villagersworked side-by-side building cisterns for four of the vil-lage families. Cisterns are cylinder-shaped waterproofreceptacles for harvesting rain water and protecting itfrom contamination.

The cisterns will not only provide water for household use but alsowill allow for increased animal husbandry and livestock coopera-tives.

Employees and villagers laid the foundations, bent and tied the wireand mixed cement to construct the cisterns.

Cat Demolition, Sorting Grapples Designed for Tough AppsCat demolition and sorting grapples are designed for the

most rigorous applications, including building demolition,construction and demolition debris recycling, scrap recy-cling, solid waste transfer station loading, tree removal andretaining wall construction, as well as placing boulders, riprap, concrete, blocks and other difficult-to-handle materials.These versatile, heavy-duty tools are capable of handlinglarge volumes of material while providing the ability to sortthrough recyclable debris, thus enhancing recovery rates andreducing related costs for labor, transportation and landfillfees, according to the manufacturer.

The Cat demolition and sorting grapples lineup includesfive models designed to fit a broad range of Cat hydraulic

excavators, both crawler- and wheel-type, with operatingweights from 22,000 to 99,200 lbs. (10,000 to 45,000 kg).These work tools are designed for severe service, using highgrade, impact resistant steel throughout, with reinforced jawsand high-wear cutting edges made of AR500 steel.

For flexible performance, the grapples feature 360-degreerotation, allowing precise positioning of the tool withoutmoving the machine. Synchronized jaws enhance control ofthe grapple, allowing repeatable action cycle after cycle, andhigh clamping forces ensure material retention during eachcycle to boost production efficiency.

The precise design of the grapple results in edge-to-edgecontact along the tips of the jaws, which allows the operatorto pick out the smallest items for selective recycling.Overbite stops further enhance edge-to-edge contact evenwhen working in thin materials.

Wide jaw openings, ranging from 71 to nearly 90 in. (180

to 228 cm), greatly expand the working flexibility of thegrapples and allow visibility to the work area for more effec-tive material screening. The zero clearance design of thejaws allows the grapples to work tightly against verticalwalls and containers, and the smooth inner profile of thejaws allows material to easily enter and exit without catch-ing, thus speeding production cycles.

The high-torque rotation motor is engineered for reliableperformance cycle after cycle and is protected from job sitehazards. Serviceability features for the new Cat demolitionand sorting grapples include ample access to internal parts,ground-level access to grease points and replaceable cuttingedges.

For more information, visitwww.cat.com/attachments/grapples.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

Pages 11-15For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachments & Parts

A Cat G330 grapple pulls rebar from debris.

Genesis Attachments’ LXP 800 Worksfor Largest Columns, Structures, Jobs

Genesis Attachments has expandedits Logix Processor, LXP, productfamily with the new LXP 800, pro-viding the line’s largest jaw open-ings, jaw depths andcapacities.

Featuring con-crete pulverizer,shear and con-crete crackerjaw openings of61, 40 and 71 in.and jaw depths of39, 35 and 50 in.(155, 101 and 180 cmand 99, 89 and 127 cm) respective-ly, the LXP 800 is a powerful demoli-tion tool for large columns, structuresand projects, fitting 90,000 to 150,000lb. (40,823 to 68,039 kg) excavators.

“Conversations with contractorsand an analysis of tools on the marketidentified the need for a versatile,interchangeable-jaw attachment thathas bigger jaw openings and depths,”said Steve Letko, Genesis engineering

services manager. “The Genesis LXPhas always been a powerful concreteprocessor that enables customers tochange-out jaw sets in 15 minutes tomeet the needs of their application,but now it provides even more power

and capacity, openingthe door for demoli-

tion contractors to useone tool on a job thatpreviously requiredtwo and to bid onjobs on which theypreviously might not

have been able.”All LXP jaw sets feature a pivot

system that keeps each jaw set’s pivotgroup intact, providing a power curvethat matches the jaw’s primary appli-cation, and bolt-on wear parts forquick and easy maintenance.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

The LXP 800 is a powerful demoli-tion tool for large columns, struc-tures and projects, fitting 90,000 to150,000 lb. (40,823 to 68,039 kg)

excavators.

Page 12 • June 1, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Diversified Products’s next genera-tion of fall arrest service crane basket isdesigned for accessing high-reachmaintenance areas, especially on largeequipment. The new yoke-style bas-kets quickly attach to service cranes,providing personnel with a convenient,safe alternative to renting aerial lifts,using ladders or climbing on equip-ment.Diversified’s baskets include a

bracket for attaching to most availableservice crane trucks. For easy storageand transport, the baskets also areoffered with a new specialized carrier,which installs behind the truck in thereceiver hitch. This system allowsoperators to carry the baskets withthem from site to site without tying upspace in their truck beds.For maximum durability the service

crane baskets are constructed of heavy-duty steel. The full-sized floor is 30 in.wide by 30 in. (76 by 76 cm) deep, andthe inward-opening doors are designedto save space, promote easy entry andprovide additional worker safety.Other standard features include floor

slots to drain water, upset holes to pre-

vent slippage, lanyard attach points, and alow-maintenance, high-capacity caliperbrake to increase stability. These featuresallow the man baskets to meet or exceedASME standard B30.23 and OSHA 29CFR 1926 requirements for personnellifting systems.Options include a step for added con-

venience, a stand for installation onuneven ground or large cranes, and aCSA-approved upper basket enclosure.“Too many workers are getting hurt

as a result of climbing equipment withladders or by hand,” said Ray Fritel,president of Diversified Products.“We’ve designed the service crane bas-kets to eliminate these unsafe practicesand prevent unnecessary job siteinjuries.”In addition to service crane baskets,

Diversified offers a full line of yoke-style, rotating and custom-built manbaskets for other types of equipment.For more information, call 254/757-

1177 or visitwww.diversifiedproduct.com.

(This story also can be found on

Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)

Diversified Introduces Next Gen Fall Arrest Service Crane Basket

Diversified’s baskets include a bracket for attaching to most available service crane trucks.For easy storage and transport, the baskets also are offered with a new specialized carri-er, which installs behind the truck in the receiver hitch.

Delivering up to 750 blows per minute, the 2,061-lb. (935 kg) DXB100H is designed for use with exca-vators in the popular 11 to 16.5 ton (10 to 15 t) weight range, specifically the Doosan DX140LC andDX140LCR.

New Doosan DXB100HBreaker Delivers UpTo 750 Blows Per Min.The Doosan DXB100H hydraulic breaker features an energy recovery

system that increases strike power for maximum productivity in rentalapplications. Delivering up to 750 blows per minute, the 2,061-lb. (935 kg)

DXB100H is designed for use with excavators in the popular 11 to 16.5ton (10 to 15 t) weight range, specifically the Doosan DX140LC andDX140LCR. Rated in the 2,000 ft.-lb. impact energy class, the DXB100Hrequires a hydraulic flow rate of between 18.5 and 31.7 gal. per minute (70to 120 Lpm).The energy recovery system captures the piston’s rebound energy and

uses it to increase strike power, maximizing performance. At the sametime, the main control valve system optimizes strike power. Blank-fire pro-tection is standard on the DXB100H and is accomplished by using a cush-ion of oil at the base of the piston, which reduces the metal-to-metal con-tact in case of a blank fire situation. The DXB100H breaker comes with a mounting cap, auxiliary hydraulic

hoses, two moil points, toolbox and a nitrogen checking device. A one-yearlimited warranty also comes standard.In addition to the general purpose moil, working tools available for the

DXB100H include a blunt tool, a chisel and a pyramidal or “nail” tool.(This story also can be found on Construction Equipment Guide’s Web site

at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 1, 2013 • Page 13

Page 14 • June 1, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Check our Pricing:800-365-7260

www.depparts.com

Rubber Tracks • Undercarriage Parts Hydraulic Pumps • Travel Motors • Engine Parts

• REPLACEMENT PARTS •

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 1, 2013 • Page 15

© 2013 Helac Corporation. All rights reserved.

®

Learn more at www.helac.com

800.PWR.TILT

800.PWR.TIL

®

T800.PWR.TILLT

Learn more at www © 2013 Helac Corpora

.helac.comLearn more at www ved.All rights resertion. Helac Corpora t

.helac.com

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!


Belgrade, MT406-388-2308Billings, MT

406-259-9720Boise, ID

208-388-3323Salt Lake City, UT801-974-0388

St. George, UT435-674-2994Las Vegas, NV702-320-6500Phoenix, AZ

602-232-0600Tucson, AZ

520-770-1120

Albuquerque, NM505-764-8100

Dallas, TX972-986-0910Houston, TX

713-433-6411

H&E Equipment Serviceswww.HE-equipment.com

8600 Calabash Ave.Fontana, CA 92335562-286-6618

Fax: 909-356-1340275 W. Larch RoadTracy, CA 95304209-597-3824

5909 12th Street EastFife, WA 98424253-254-7950

91-210 Kalaeloa Blve.Kapolei, HI 96707808-682-7263

5801 Silverado WayAnchorage, AK 99518

855-342-72633521 Alken Street

Bakersfield, CA 93308855-927-2637

Western Pacific Crane & Equipmentwww.wpcrane.com

Kirby-Smith Machinery, Inc.www.kirby-smith.com

Oklahoma City, OK800-375-3339

Tulsa, OK800-375-3733Kansas City, KS877-851-5729St. Louis, MO

866-279-1392

RT9150E rough-terrain craneAt Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite.

Featured is the RTE – its USt capacity and ft. boom combination provide the best capacity and longest boom in its class.

For more information, visit www.manitowoccranes.com

LEADERS IN LIFTING

Tiltable cab Superior boom design Removable outrigger boxes


Powering Your Productivity...For Over A Century

Portable Power

©2013 Doosan Infracore Portable PowerFind Us on DoosanPortablePower.com (800) 633-5206 Follow Us on

Air CompressorSolutions, Inc.

TEXASOdessa

(432) 335-5900

Ditch Witch of Arizona

ARIZONAPhoenix

(602) 437-0351

Ditch Witch of SouthernArizona

ARIZONATucson

(520) 579-0261

Volvo ConstructionEquipment & Services

CALIFORNIABakersfield

(661) 387-6090

Fresno(559) 834-4420

San Leandro(510) 357-9131

Sacramento(916) 388-2244

San Diego/Lakeside(619) 441-3690

Corona(951) 277-7620

TEXASArlington

(817) 633-1010

Houston(713) 681-9221

OREGON7000 SW Sandburg Rd.

Portland(503) 639-8910

7909 N. Upland DrPortland

(503) 286-6400

29550 Airport RoadEugene

(541) 689-7407

500 Pech RoadMedford

(541) 779-3444

WASHINGTON9892 40th Avenue South

Seattle(206) 722-5800

19705 60th Avenue NE, Suite B1Arlington

(360) 474-8461

1307 54th Avenue EastFife

(253) 926-4386

3896 Irongate RoadBellingham

(360) 756-6572

909 South 19th StreetYakima

(509) 248-5636

1224 North California AvePasco

(509) 545-1959

4890 Contractors DriveWenatchee

(509) 884-2934

5518 East BroadwaySpokane

(509) 536-7300

NEVADA25 Vista Boulevard

Sparks(775) 356-9333

Pacific Power Productswww.pac-power.com

Generators: Rental & New Sales

WASHINGTON 6100 So. 6th Way

Ridgefield(800) 882-3860(360) 887-5900

7215 So. 228th StreetKent

(800) 882-3860(253) 854-0505

6615 East Mallon Ave.Spokane

OREGON2343 Biddle Rd.

Medford

1203 SW Lake Rd.Redmond

Pape Material Handling Inc. / Bobcat Westwww.papemh.com www.bobcatwest.com

Air Compressors & Light Towers: New, Rental, Rental Sales, Generators: Rental Only


WAUKESHA-PEARCE INDUSTRIES, INC.

12320 S. MainHouston, TX 77035

713-723-1050Fax: 713-551-0798

Tomball, TX281-351-9016

Kilgore, TX903-984-2011

Port Arthur, TX409-721-5305

Corpus Christi, TX361-884-8275

Edinburg, TX956-386-0107

San Antonio, TX210-648-4444

Pflugerville, TX512-251-0013

Buffalo, TX903-322-7150www.wpi.com

KOMATSU EQUIPMENT COMPANY1486 South Distribution Drive

Salt Lake City, UT 84104801-972-3660

4460 Pioneer WayElko, NV 89801775-753-7557

3825 Losee RoadNorth Las Vegas, NV 89030

702-399-1004

900 Marietta WaySparks, NV 89431

775-356-1334

6253 West Gilbert Industrial CourtHurricane, UT 84737

435-986-1000

10790 South Highway 59Gillette, WY 82718

307-682-1445

405 Jonah DriveRock Springs, WY 82901

307-686-1300

RDO Equipment Co. Hosts TotalSolutions at Indio, Calif., LocationRDO Equipment Co. hosted a Total

Solutions Event March 29 at itsIndio, Calif., location.

Those in attendance were treated to clin-ics held on tillage, Topcon products, back-hoes, chippers, AG tractors and JD Link.Factory representatives and a John DeereLink specialist were on site to performdemonstrations on equipment, such as the755 hp grinder.Perks of the day for guests included

breakfast and lunch, a dozer simulator, anda door prize for a John Deere safe.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.) A Vermeer BC 1500 brush chipper.

Customers engage in the dozer simulator at the TotalSolution Event.

A different angle of the Vermeer HG600 grinderand John Deere 225D excavator.

A Vermeer HG600 grinder and John Deere 225Dexcavator.


Komatsu Traction Control System (K-TCS) automatically increases performance in soft ground conditions.

The redesigned Tier 4 Interim Articulated Trucks will boost your productivity and lower your costs. From increased payload to improved traction control, the truck experts at Komatsu once again deliver on your need for a lower cost per ton moved.

ARTICULATED TRUCKS

From Komatsu – The Truck Experts

New operator’s cab provides better visibility and ergonomics.

Efficient Tier 4 Interim engine provides up to an 8% reduction in fuel consumption.

Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.komatsuamerica.com

.komatsuamerica.comwww

.komatsuamerica.com

KIRBY-SMITH

MACHINERY INC.6715 W Reno

Oklahoma City, OK 73137800-375-3339405-495-7820

Fax: 405-787-5973

12321 E. Pine StreetTulsa, OK 74116

800-375-3733918-438-1700

Fax: 918-437-7065

Abilene, TX877-577-5729325-692-6334

Amarillo, TX800-283-1247806-373-2826

Dallas, TX800-753-1247214-371-7777

Ft. Worth, TX877-851-9977817-378-0600

Lubbock, TX866-289-6087806-745-2112

Odessa, TX877-794-1800432-333-7000

www.kirby-smith.com

POWER MOTIVE CORPORATION

5000 Vasquez Blvd.Denver, CO 80216

303-355-5900Fax: 303-388-9328

Colorado Springs, CO719-576-5541

Grand Junction, CO970-241-1550

Milliken, CO970-339-4098

www.powermotivecorp.com

ROAD MACHINERY LLC

4710A E. Elwood • Suite 6-7Phoenix, AZ 85040

602-252-7121Fax: 602-253-9690

Gilbert, AZ480-545-2400

Tucson, AZ520-623-8681

Prescott, AZ928-778-5621


Farmington, NM505-324-8601

El Paso, TX915-872-1001

Bakersfield, CA661-695-4830

Freemont, CA510-659-1903

Perris, CA909-355-3600

Redding, CA530-229-3822

Sacramento, CA916-375-3540

Cananea, Sonora, Mexico011-52-6453328300

www.roadmachinery.com



Built from a lineage of market leaders for over 60+ years

ARIZONAEARHART EQUIPMENT

www.earhartequipment.comTucson

520-889-6396

OKLAHOMAOCT EQUIPMENT

www.octequipment.comClinton

580-323-3422Oklahoma City405-789-6812

Tulsa918-437-5085

NEW MEXICOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Flora Vista505-334-5522 (Rental)

La Cruces575-647-9700Albuquerque

505-938-2000 (Rental)505-345-8411

Hobbs575-393-2148 (Rental)

575-393-3665Clovis

505-235-3294 (Rental)Farmington

505-327-5331

NEVADAAPCO EQUIPMENT

www.apcoequipment.comNorth Las Vegas702-871-7474

HAWAIIHAWTHORNE CAT

www.pacific.hawthornecat.comHilo

808-961-3437Kauai

808-245-4058Kona

808-329-4521Oahu

808-677-9111Oahu/Mapunapuna

808-676-0227 (Rental)Maui

808-877-6538

COLORADOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Aurora303-739-3000

Denver303-433-2727 (Rental)

Carbondale970-963-7368 (Rental)

Commerce City303-286-2300 (Rental)

Colorado Springs719-390-7316 (Rental)

719-635-1669Granby

970-328-2080 (Rental)Gypsum

970-328-2080 (Rental)Hayden

970-276-3781

Silverthorne970-262-3788 (Rental)

Fort Collins970-493-5005 (Rental)

Grand Junction970-245-6546 (Rental)

970-242-2834Pueblo

719-544-0088 (Rental)719-544-4433

Steamboat Springs970-871-1990 (Rental)

Windsor970-278-1750 (Rental)

Burlington719-346-7880 (Rental)

(719) 346-5132Durango

970-259-2001 (Rental)970-259-2001

Windsor970-278-1750

TEXASANDERSON MACHINERY CO.www.andersonmachinery

texas.comCorpus Christi361-289-6043

Manor512-272-8133

Pharr956-781-5995San Antonio210-661-2366

Victoria361-575-8111

HOLT CATwww.holtcat.com

Dallas214-342-6700Ft. Worth

817-847-8880Irving

214-342-6700Waco

254-662-7377

GEORGE P. BANE, INC.www.banemachinery.com

Tyler903-597-6641

YELLOWHOUSE MACHINERYCO.

www.yellowhouse.usAbilene

800-592-4468Amarillo

800-658-9868Lubbock

800-658-9878Odessa

800-658-9888San Angelo

800-658-9130Wichita Falls877-658-9877

MUSTANG CATwww.mustangcat.com

Houston 713-460-2000Beaumont

409-892-8412

Bryan979-775-7368

Bryan979-775-0639Channelview281-452-7368

Conroe936-756-1110El Campo

979-543-3389Freeport

979-233-7368Houston

713-462-9993Houston

713-228-7368LaMarque

409-935-7000Lufkin

936-639-5551Lufkin

936-632-6775Nederland

409-722-7368

WAGNER EQUIPMENT CO.www.wagnerequipment.com

El Paso915-493-5005 (Rental)

915-821-7651

CALIFORNIAHAWTHORNE CAT

www.hawthornecat.comSan Diego

858-674-7000Lakeside

619-561-8700 (Rental)San Marcos

760-740-2900 (Rentals)

QUINN CATwww.quinncompany.com10006 Rose Hills Road

City of Industry, CA 90601888-842-2155

Fax: 562-692-1843BakersfieldCorcoranFirebaugh

Foothill RanchFresno

LancasterLos AngelesOxnardSalinas

Santa MariaSylmar



ASCO SUPPLY CO., INC.Austin, TX 512/272-8922

San Angelo, TX 325/655-5666

San Antonio, TX 210/333-8000

Wichita Falls, TX 940/687-2726

www.ascoeq.com

ABILENE NEW HOLLAND, LTD.Abilene, TX 800/382-9271

www.anhltd.com

AMARILLO MACHINERY CO.Amarillo, TX 888/309-7800

www.amarillomachinery.com

BANE MACHINERY INC.Dallas, TX 800/594-2263

Ft. Worth, TX 800/601-2263

Tyler, TX 800/594-2200

www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENTOklahoma City, OK 405/917-9191

Tulsa, OK 918/835-7200

www.oklahomaterritoryequipment.com

APCO EQUIPMENTNorth Las Vegas, NV 800/574-4089

www.apcoequipment.com

TRI-WEST TRACTOR, INC.Livermore, CA 925/455-8200

www.tri-westtractor.com

RASMUSSEN EQUIPMENT CO.West Valley City, UT 800/453-8032

www.rasmussenequipment.com

CLM EQUIPMENT CO. INC.Lafayette, LA

Prairieville, LA 225/677-7838

Sulphur, LA 337/625-5942

Houston, TX 281/598-2500

www.clmequipment.com


Top models for great performance

Great performance from Dynapac’s rollers and paversDynapac is proud to present several new pneumatic tired rollers: the CP224, CP224W and CP274. Dynapac’s pneumatic tired rollers

and comfort. Exceptional features include a smooth start-stop system

Dynapac’s new F1000 series wheeled or tracked asphalt pavers

Dynapac’s drum rollers

dynapac.us.

www.dynapac.us

www.dynapac.us

BEE EQUIPMENT SALES LTD.2506 Slaton HighwayLubbock, TX 79404806/745-1511

Fax: 806/745-1542

State Senate Targets Nevada’sConstruction Defect LawBy Sandra CherebASSOCIATED PRESS

CARSON CITY, Nev. (AP) Constructiondefect laws intended to protect consumershave morphed into a trial lawyer’s dreamand a nightmare for Nevada’s buildingtrades, putting many out of business andsending the cost of insurance skyrocketing,representatives of the homebuilding andconstruction industry said recently. But in testimony before the Senate

Judiciary Committee, homeowners recalledtheir own nightmares of shoddy workman-ship, faulty plumbing andpoor engineering that werefixed only after lawsuitswere filed. There was little consen-

sus over SB161, presentedby Senate Minority LeaderMichael Roberson, R-Henderson. SB161 is one of several billsdealing with construction defect reforms,long a priority for Republicans. The bill would define a constructional

defect as a flaw that “presents an unreason-able risk of injury to a person or property.’’ Italso would reduce the time in which lawsuitscould be filed and remove attorney’s feesfrom recoverable damages. Roberson said the legislation is “critical to

putting Nevadans back to work.’’ He said the law when adopted in 1995

was “designed as a consumer protectiondevice.’’ “Unfortunately, 18 years later the intent of

this law is hardly recognizable,’’ he said. Roberson and other backers of the bill

cited a recent study by the University ofNevada, Las Vegas that said while newhome sales plunged 86 percent between2000 and 2012, construction defect claimsrose 355 percent. Since 2006, the number ofclaims per new home in Nevada is 38 timesthe national average, the report said. “It’s no longer a question of whether this

is a crisis,’’ Roberson said. Homebuilders complained of predatory

behavior by lawyers who solicit homeown-ers to join lawsuits, even if they have nomajor problems. They also argued that thelegal process prevents contractors fromworking with homeowners to fix problemsonce a construction default suit is filed, lead-ing to expensive, drawn out litigation. Josh Hicks, an attorney representing the

Coalition for Fairness in Construction, refer-enced one pending case where lawyers in asuit over $15,000 are seeking $1.5 million infees. Jesse Haw, president of Hawco Homes in

Sparks and co-chairman of the coalition, saidsince 1990, his company has built more than1,500 homes in the Reno-Sparks area and atone time employed 200. “We didn’t have one single lawsuit,’’ he

said. “When something was wrong with thehouse, we fixed it.’’ But he said his insurance premiums

jumped from $37,000 in 1997 to $749,000five years later. “It effectively pushed our company out of

the market,’’ he said. “Today we have threeemployees.’’ “If there’s an issue with a house, builders

want to fix them and homeowners wantthem fixed,’’ Haw said. “We believe litiga-tion should be the last option rather than thefirst.’’ But there was little sympathy from home-

owners who’ve had to deal with majordefects, like broken pipes in the walls. Tracy Rhodes first noticed a discoloration

on the baseboard in 2007. “Mushrooms were growing from behind

my dishwasher,’’ she said. “My builder nolonger existed.’’ “By 2010, I was broke, homeless and

alone.’’ Ralph Walker, a retired trial lawyer, said

he and his wife built their “dream house’’ inReno for around $500,000. Within threeyears it was settling. His floors sagged 6inches. Concrete was cracking. Door would-n’t close. “I didn’t want a lawsuit. I went to the

builder,’’ he said. “I showed him my prob-lem; he said you have a major problemhere.’’ The builder called the engineer, but

Walker said he never heard back from any-one. “That’s why I needed a lawyerinvolved.’’ Eventually, he said dozens of concrete

piers had to be installed under the home tostabilize it. The cost was $400,000. The lawsuit judgment included $133,000

to pay his lawyer. Small subcontractors also complained of

being swept up in litigation for constructionproblems that don’t involve them. No action was taken on the bill. (This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

State Sen. Roberson said the legislationis “critical to putting Nevadans back towork.’’

Bell Articulated Dump Trucks Re-Enter the U.S. MarketBell Trucks America Inc. has been

appointed the Bell articulated truck distrib-utor for the United States by BellEquipment SA. Bell Trucks America Inc.,also known as BTA, is based in Houston,Texas, and will begin distributing the BellB35D, B40D, B45D and the largest pro-duction ADT, the Bell B50D. The newBell B25E and the B30E will be availablein January 2014 to complete the line-up ofarticulated trucks in the United States. Bell Trucks America will be headed up

by Wayne Michels, general manager andKevin O’Donnell, vice president-sales.Michels is focused mainly on customersupport, including parts, service and war-ranty. He comes to Bell Trucks with 40plus years industry experience, 28 witharticulated trucks, 20 with Moxy Trucks of America andthe last 8 years with Terex trucks at Four SeasonsEquipment. O’Donnell joins BTA from 4 years at Hydrema US and

20 years at Moxy Trucks of America, where he served asnational sales manager of both companies. Bell Trucks America also announced the addition of

four new dealers in its first month in the United States:Four Seasons Equipment Inc. located in Houston, Texas,with offices in Dallas, Sulphur, La., and Williston, N.D.;Hills Machinery in South Carolina and North Carolina;Heavy Equipment Rentals & Sales LLC, located inCorona, Calif., and Highway Equipment Company inwestern Pennsylvania.

Thomas H. Reynolds, president ofHighway Equipment Company said, “Weare excited about Bell Trucks. Bell’s repu-tation around the world for quality, supportand performance is impressive. Here inAmerica, Bell has started off with a team oftalented people. Parts are already on theshelves. Support is in place. We find BellTrucks America to be the perfect fit in ourequipment portfolio that fits HighwayEquipment’s long term strategy in themid-Atlantic region.” In South Carolina, Jim Hills, president

of Hills Machinery added, “Afterresearching articulated trucks in theindustry, we feel the Bell is the best forour markets. They have a tremendoushorsepower to weight ratio that is critical

for the soft conditions in the Carolinas. We are excited tobe representing Bell and looking forward to a long last-ing relationship.”For more information, visit

www.belltrucksamerica.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

XL 70 MFG Trailers Comes With New Standard FeaturesXL Specialized Trailers’ XL 70

Mechanical Full-Width Gooseneck (MFG),XL’s most popular mechanical trailer, isequipped with new standard features. The XL 35-ton (31.8 t) MFG now comes

standard with manual ride height and doubledonuts for varying deck heights, and a fullyequipped main deck with 14 chain drops perside, 8 bent D-rings per side, and removableswingout outrigger brackets on 24 in. (61cm) centers (for use with swingout outrig-gers for over width loads). Traction aids on the rear bridge transition

assist when loading onto the rear bridge,while 4 pan style D-rings on the rear deckand gooseneck add tie-down versatility. Thetrailer comes prepped for a flip axle. Other new customer friendly features

include an angled control panel for easieraccess to the air, electric and raise/lowervalves, and the lockable toolbox in the

gooseneck with aluminum cover, chain rack,and a light for finding items at night withease.The XL 70 MFG still includes all the fea-

tures that have made it one of the most usedmechanical trailers on the market. T-1 flangeand 80K web are the start to built to last trail-

ers, while the Apitong decking is strongerthan Oak. The XL 70 MFG boasts a 10 ft. (3m) long full-width detachable gooseneck, 29ft. (8.8 m) long main deck, and 9 ft. (2.7 m)long main deck; all 102 in. (259 cm) wide. Popular options such as removable

swingout outriggers, pull out lights, battery

back-up, a storage area in the main deck,open center main deck, aluminum wheels,electric dump valve, and a third taillightpackage provide individualization.


Pages 25-27To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

The XL 70 MFG still includes all the features that have made it one of the most used mechanical trailers on the market.

Wayne Michels (L) and Kevin O’Donnell are heading up Bell Trucks America.

Page 26 • June 1, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Thunder Creek EquipmentLaunches Service TrailerThunder Creek Equipment, a manufactur-

er of fuel and service trailers, has expandedits product line with the introduction of anew trailer designed specifically for in-fieldequipment service.This trailer holds 440 gal. (1,666 L) of

fluid in combinations of 25, 55 and 110 gal.(94.6, 208 and416 L) capaci-ties. It can beconfigured withup to eight tanks.These can beused for variousoils and lubri-cants, oil reclaim,as well asantifreeze, dieselfuel and dieselexhaust depend-ing on opera-tional needs.Grease systems also are available.The pumping systems are protected by

two hatch doors located on either side of thetrailer. Pneumatic pumps are powered by acombination compressor/generator located

in the rear utility box. Owners can upgradeto Thunder Creek’s Air N Arc 150, a combi-nation 3-in-1 welder/air compressor/genera-tor, providing more versatility when main-taining equipment in the field, according tothe manufacturer.The front toolbox, located in the nose of

the trailer, has aused filter drainpan and space foradditional equip-ment needed toservice equipment. “This trailer is

all about minimiz-ing the time need-ed to serviceequipment in thefield, without thecapital investmentthat comes with adedicated lube

truck,” said Mike VanderLinden, productengineer of Thunder Creek Equipment.


This trailer holds 440 gal. (1,666 L) of fluid incombinations of 25, 55 and 110 gal. (94.6, 208and 416 L) capacities. It can be configuredwith up to eight tanks.

Kenworth K270, K370 Cabovers Simplify Urban Deliveries“When it comes to delivering loads into

tight urban settings, nothing compares toKenworth’s K270 and K370 medium dutycabovers,” said Doug Powell, Kenworthmedium duty marketing manager.According to Powell, beverage distribu-

tors, pick-up and delivery, furniture, foodprocessors and other urban delivery applica-tions have been early customers of theKenworth K270 and K370. “Kenworth’s excellent medium duty

cabovers provide customers with a greatchoice of quality trucks that fit their applica-tions,” said Powell. “This year, we expectour cabover sales to increase further. Weexpect to see customers that run lightertrucks move to longer-lasting trucks withcomponents designed to stand the test oftime. The K270 and K370 will lower thetotal cost of ownership.”That was one reason why Peoria, Ill.-

based Home Comfort Insulation purchasedKenworth cabovers for its operation. “That, along with reliability of the

Kenworth is what sold us on the K370,” saidHans Schmidgall, a fourth-generation opera-tions manager of the 65-year-old family-owned business. “We run in some very tight areas, along

with driving around in cul-de-sacs, so a

cabover is what we need for our operation,”said Schmidgall. “Some of our other truckshave had a hard time staying out of the shop— they just don’t hold up. We’ve been verypleased with the Kenworth cabovers andthey’re very comfortable to drive. All in all,we’ve been very happy.”Steve Ritchie, a Mississauga, Ont., ware-

house manager for JFC — a food distributor,added, “Driving in downtown Toronto withits narrow streets and busy intersections withpedestrians crossing can be difficult andnerve-wracking. So, we were looking for acabover that offered what a conventionalClass 7 truck could provide in loadingcapacity. We found that with the Kenworth

K370 and we’ve been pleased with its per-formance and the visibility and maneuver-ability it offers our drivers.”Available with wheelbases ranging from

142- to 242-in. (360 to 614 cm), the K270and K370 can accommodate bodies from16- to 28-ft. (4.8 to 8.5 m). Both the K270and K370 are powered by a 6.7-L PACCARPX-7 engine with a standard 220-hp (164kW) rating and 520 lb-ft of maximumtorque. Optional ratings are 240-hp (179kW) and 560 lb.-ft. of torque and 250-hp(186 kW) with 660 lb.-ft. of torque. Bothmodels are available with Allison 5-speedtransmissions.Inside, the truck accommodates bench

seating for three. Its large 2,500-sq.-in.wraparound windshield combines with largeside windows to give optimum visibility. “Ample storage is also built-in,” said

Powell. “And, like with our T270 and T370,the fit and finish is the highest quality.They’re great looking trucks, and ones thatwill stand the test of time.”For more information, visit www.ken-

worth.com. (This story also can be found on

Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)Both the K270 and K370 are powered by a 6.7-L PACCAR PX-7 engine with a stan-dard 220-hp (164 kW) rating and 520 lb.-ft. of maximum torque.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • June 1, 2013 • Page 27

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 1, 2013 • Page 29Page 28 • June 1, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

210 X3 250 X3 250 X3 LF 300 X3 350 X3 470 X3

Weight: 47,840 lbs 55,336 lbs 61,950 lbs 65,918 lbs 80,028 lbs 111,554 lbs

Arm: 9 ft 8 in 9 ft 10 in 26 ft 3 in 10 ft 5 in 10 ft 8 in 11 ft 1 in

Bucket Weight: 1,440 lbs 1,790 lbs 750 lbs 1,940 lbs 2,580 lbs 3,350 lbs

Horsepower: 160 hp 177 hp 177 hp 207 hp 266 hp 362 hp

Max. Dig Depth: 21 ft 10 in 22 ft 8 in 47 ft 9 in 23 ft 4 in 24 ft 1 in 24 ft 10 in

ISO Breakout Force: 24,730 lbf 29,000 lbf 9,060 lbf 34,400 lbf 40,020 lbf 46,310 lbf

Bucket Digging Force: 34,170 lbf 39,120 lbf 18,570 lbf 42,760 lbf 55,750 lbf 60,700 lbf

Swing Torque: 47,204 lbf-ft 55,243 lbf-ft 51,482 lbf-ft 68,151 lbf-ft 82,607 lbf-ft 110,634 lbf-ft

Bucket Range: .61 - 1.75 yd3 .76 - 2.43 yd3 .50 - .86 yd3 .76 - 2.43 yd3 1.08 - 2.93 yd3 1.58 - 4.05 yd3

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make

Visit your Link-Belt excavator dealer todayand experience the X Factor for yourself.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 1, 2013 • Page 29Page 28 • June 1, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

210 X3 250 X3 250 X3 LF 300 X3 350 X3 470 X3

Weight: 47,840 lbs 55,336 lbs 61,950 lbs 65,918 lbs 80,028 lbs 111,554 lbs

Arm: 9 ft 8 in 9 ft 10 in 26 ft 3 in 10 ft 5 in 10 ft 8 in 11 ft 1 in

Bucket Weight: 1,440 lbs 1,790 lbs 750 lbs 1,940 lbs 2,580 lbs 3,350 lbs

Horsepower: 160 hp 177 hp 177 hp 207 hp 266 hp 362 hp

Max. Dig Depth: 21 ft 10 in 22 ft 8 in 47 ft 9 in 23 ft 4 in 24 ft 1 in 24 ft 10 in

ISO Breakout Force: 24,730 lbf 29,000 lbf 9,060 lbf 34,400 lbf 40,020 lbf 46,310 lbf

Bucket Digging Force: 34,170 lbf 39,120 lbf 18,570 lbf 42,760 lbf 55,750 lbf 60,700 lbf

Swing Torque: 47,204 lbf-ft 55,243 lbf-ft 51,482 lbf-ft 68,151 lbf-ft 82,607 lbf-ft 110,634 lbf-ft

Bucket Range: .61 - 1.75 yd3 .76 - 2.43 yd3 .50 - .86 yd3 .76 - 2.43 yd3 1.08 - 2.93 yd3 1.58 - 4.05 yd3

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make

Visit your Link-Belt excavator dealer todayand experience the X Factor for yourself.


Trenching—The Way It Should Be.You may have noticed something different about our most recent trencher models. Our new walk-behinds—

the compact RT10, RT12 and RT24—offer a choice of high-flotation tires or heavy-duty oscillating tracks,

both of which provide outstanding stability and traction. And the mighty RT115 Quad’s innovative chevron

track pattern provides maximum traction in wet conditions and on slopes. With every Ditch Witch® trencher

you can count on the hardest-working, longest-lasting machine in its class—that will never change. See

your dealer for more information, or visit ditchwitch.com.

ditchwitch.com

RT115 QUAD


©2010 The Charles Machine Works, Inc.

RT10RT12

RT24

Witch Equipment Company, Inc. Fort Worth, TX | 817-429-4824

Witch Equipment Company, Inc. Hewitt, TX | 254-666-3344

Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888

Ditch Witch of Houston Houston, TX | 713-462-8866

Ditch Witch of East Texas Tyler, TX | 903-592-6226

Ditch Witch Southwest Lubbock, TX | 806-745-6866

Ditch Witch of Oklahoma Edmond, OK | 405-348-4633

Ditch Witch of Tulsa Tulsa, OK | 918-438-1560

Ditch Witch of Arkansas Springdale, AR | 479-419-9771

Ditch Witch of Arkansas Benton, AR | 501-316-3200

Ditch Witch of Arizona Phoenix, AZ | 602-437-0351

Ditch Witch of Southern Arizona Tucson, AZ | 520-579-0261

Witch Equipment Co., Inc.Fort Worth, TX | 817-429-4824

Hewitt, TX | 254-666-3344

Ditch Witch of OklahomaEdmond, OK | 405-348-4633

Tulsa, OK | 918-438-1560

Ditch Witch of New Mexico, Inc.Albuquerque, NM | 505-345-1888

Ditch Witch of East TexasTyler, TX | 903-592-6226

Ditch Witch SouthwestLubbock, TX | 806-745-6866Odessa, TX | 432-617-8351

Ditch Witch of ArkansasSpringdale, AR | 479-419-9771

Benton, AR | 501-316-3200

Valley Ditch WitchCorpus Christi, TX | 888-356-3139

Harlingen, TX | 956-425-4300

Ditch Witch of ArizonaPhoenix, AZ | 602-437-0351

Ditch Witch of Southern ArizonaTucson, AZ | 520-579-0261

Ditch Witch of HoustonHouston, TX | 713-462-8866


Functionally Obsolete Bridge Repairs Estimated at $15MIt also came a day after the

chairwoman of the NationalTransportation Safety Board calledthe collapse a wake-up call to thestate of safety of the nation’s infra-structure.

The Washington state collapse,caused by the truck carrying anoversize load, fractured one of themajor trade and travel corridors on

the West Coast. The interstate con-nects Washington state withCanada, which is about an hournorth of Mount Vernon, where thebridge buckled.

After the collapse, semi-trucks,travel buses and cars clogged localbridges as traffic was divertedthrough the small cities around thebridge. But overall, traffic wasflowing as well as expected during

the holiday weekend. “We’re going to get this project

done as fast as humanly possible,”Inslee, a democrat, said. “There areno more important issue right nowto the economy of the state ofWashington than getting thisbridge up and running.”

Inslee said he hopes the tempo-rary spans, each with two lanes fornorthbound and southbound traf-

fic, will be finished in about threeweeks’ time. The spans will be pre-built and trucked to Mount Vernon.

The state plan also calls for apermanent span to be built andcompleted by autumn, officialssaid.

Officials said there are remain-ing inspections to the spans leftstanding to make sure they are safeto use.

The federal government isexpected to cover 100 percent ofthe costs of the temporary bridgeand 90 percent the replacement,said state Transportation SecretaryLynn Peterson.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

BRIDGE from page 1

The trucker was hauling drilling equipment when hisload bumped against the steel framework over anInterstate 5 bridge. He looked in his rearview mirror andwatched in horror as the span collapsed into the waterbehind him. Two vehicles fell into the icy Skagit River. Amazingly, nobody was killed. The three people who

fell into the water escaped with only minor injuries. Officials are trying to find out whether the spectacular

collapse of a bridge on one of the West’s most importantroadways was a fluke — or a sign of a bigger problemwith thousands of bridges across the United States. The spectacular collapse unfolded about 7 p.m. May

23 on the north end of the four-lane bridge near MountVernon, about 60 mi. (96 km) north of Seattle and 40 mi.(64 km) south of the Canada border. “He looked in the mirrors and it just dropped out of

sight,” Cynthia Scott, the wife of truck driver William Scott,said from the couple’s home near Spruce Grove, Alberta.“I spoke to him seconds after it happened. He was justhorrified.”The truck driver works for Mullen Trucking in Alberta,

the Washington State Patrol said. The tractor-trailer washauling a housing for drilling equipment southboundwhen the top right front corner of the load struck severalof the bridge’s trusses, the patrol said. Scott remained at the scene and cooperated with inves-

tigators. He voluntarily gave a blood sample for an alco-hol test and was not arrested. Scott has been driving truck for 20 years and hauling

specialized loads for more than 10. “He gets safety awards, safety bonuses ... for doing all

these checks, for hiring the right pilot cars and pole cars,”his wife said. Initially, it wasn’t clear if the bridge just gave way on its

own. But Washington State Patrol Chief John Batisteblamed it on the tall load. The truck made it off the bridge, but two other vehicles

went into the water about 25 ft. (7.6 m) below as the struc-ture crumbled. Bryce Kenning, of Mount Vernon, said the bridge

seemed to explode in front of him. He slammed the brakesand could see the edge of the pavement approaching, butthere was nothing he could do. “It was like time was frozen — like a roller coaster

where you’re not attached to the tracks,” Kenning said ina phone interview. “I’m sure it was just one of the loudestsounds ever to hear this thing explode and fall into thewater like that, but I didn’t hear a thing. I just witnessed it

happening in front of me.”Ed Scherbinski, vice president of Mullen Trucking, said

in an interview with The Associated Press that state offi-cials had approved of the company’s plan to drive theoversize load along I-5 to Vancouver, Wash., and thecompany hired a local escort to help navigate the route. Mike Allende, a state Department of Transportation

spokesman, confirmed the truck had a permit. “We’re still trying to figure out why it hit the bridge,”

Allende said. “It’s ultimately up to the trucking company tofigure out whether it can get through.”State officials approved the trucking company to carry

a load as high as 15 ft., 9in., (4.8 m) according tothe permit released by thestate. However, the south-bound vertical clearanceon the Skagit River bridgeis as little as 14 ft., 5 in.(4.4 m), state recordsshow. That lowest clear-ance is outside of thebridge’s vehicle travelinglanes, TransportationDepartment communica-tions director Lars Ericksonsaid. The bridge’s curvedoverhead girders are high-er in the center of the bridge but sweep lower toward adriver’s right side. The bridge has a maximum clearance of about 17 ft.

(5 m), but there is no signage to indicate how to safelynavigate the bridge with a tall load. The permit specifically describes the route the truck

would take, though it includes a qualification that the state“Does Not Guarantee Height Clearance.”It’s not rare for trucks to strike bridges in Washington

state — it’s just that such accidents don’t usually cause thestructures to collapse. The state DOT said there were 21 bridge-strikes involv-

ing trucks last year, 24 in 2011 and 14 in 2010. Officials performed a special inspection six months ago

of the bridge that collapsed because there were indica-tions it had been struck by a different vehicle. A report released said the checkup was done due to

“impact damage,” and inspectors identified tears, defor-mations and gouges on the northbound side of the bridge.The report also summarizes a variety of parts on the

bridge that have been subjected to “high-load” hits. In that Nov. 29, 2012, impact, an overheight truck

struck a metal overhead truss on the bridge, DOT spokes-woman Broch Bender said. An inspection crew “thor-oughly investigated and determined the bridge to besafe,” with only minor repairs required. She said thoseminor repairs were added to an existing list of bridgemaintenance items to be completed at a future date. There are no signs leading up to the Skagit River bridge

to warn about its clearance height. State TransportationSecretary Lynn Peterson said that under federal and statestandards, the clearance is tall enough to not require sig-

nage. Inslee said it will

cost $15 million torepair the bridge.The federal govern-ment has alreadypromised the state$1 million in emer-gency funding. Traffic could be

affected for sometime. The bridge isused by an averageof 71,000 vehicles aday, so the road-block will cause a

major disruption in trade and tourism. The closest detour is a bridge about a quarter mile east

of I-5, which is mostly used by local traffic between MountVernon and Burlington. Officials also are recommendingdetours using state Routes 20 and 9 that add dozens ofmiles to a trip. A Federal Highway Administration database lists the

bridge that collapsed as “functionally obsolete” — a cat-egory meaning that the design is outdated, such as hav-ing narrow shoulders and low clearance underneath. Butit was not classified as structurally deficient. The 1,112-ft. (339 m)-long bridge, with two lanes in

each direction, has four spans, or sections, over the watersupported by piers. It’s a steel truss bridge, meaning it hasa boxy steel frame. The northernmost span is the one that collapsed. The National Transportation Safety Board determined

that the Minneapolis bridge failed because steel gussetplates that connected the structure’s beams and girderswere too thin.

Trucker Bumps I-5 Bridge, Sees Horror Behind Him

“I’m sure it was just one of the loudestsounds ever to hear this thing explode andfall into the water like that, but I didn’t heara thing. I just witnessed it happening infront of me.”

Bryce KenningWitness

With the launch of a new series of lifting magnets,Sennebogen LLC continues to expand on its catalog ofOEM attachments for its material handlers’ line.Constantino Lannes, president of Sennebogen

LLC, said that his firm is building on its plans to pro-vide complete material handling solutions to its cus-tomers. The series of Sennebogen lifting magnetswill complete the line of 4-tine and 5-tine scrap grap-ples and mag-grapples for scrap and recycling opera-tions.“These made-in-America magnets also reinforce

our commitment to maintain the highest level of serv-ice and supply to customers throughout theAmericas,” he said.Matched to the customer’s machine and appli-

cation, Sennebogen scrap magnets are designedto maximize the lifting capacity of the materi-al handling equipment as well as the servicelife of the magnet. Like Sennebogen material handlers, the

new magnets are engineered and pur-pose-built to suit the processing capaci-ty, material densities and duty-cycleprofile of the customer’s specificoperation. Offered in arange of commonsizes from 30 to72 in. (76 to183 cm), theSennebogenlifting mag-nets will bea v a i l a b l ethrough allSennebogenequipmentdistributorsc o a s t - t o -coast.For more

information, call704/347-4910 or visitwww.sennebogen-na.com.


Pages 33-43

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Sennebogen Magnet Addsto Material Handler’s Line

The Terex Finlay 883 Spaleck combiflip-flow screen is the result of a joint part-nership between Terex Finlay and Spaleck. At the heart of the mobile plant is the

two-deck German designed and construct-ed high performance screenbox. Thestepped top deck design is combined withflip-flow technology on the bottom deck.Its processing capabilities and applicationflexibility make the machine the only all inone mobile solution for processing difficultwaste, recycling, slag, C&D, shreddedmetal, wood, compost, mulch, ores, coaland soil, according to the manufacturer. Even large-grained material can be

screened on a screening machine with aflip-flow screen deck. The screening deckwith 3D screen segments, which is posi-tioned above the flip-flow screen deck toform a cascade, protects and reduces thestress on the flip-flow screen mats. Servicelife is increased and optimal screeningresults are guaranteed.The 3D screen segments with maximum

open screen area can be changed quickly

and simply due to the modular construc-tion. The screen mats of the 3D flip-flowscreen are fastened without screws andhave no edges that could cause difficulties.This means that the screen mats can bechanged quickly and there is an optimalproduct flow on the screen mats.Key Features:• Virtually blockage-free screening in the

upper and lower deck due to tried and test-ed 3D and flip-flow technology.• The 3D screening segments guarantee

accurate screening with no long piecespassing into the middlegrade material.• The flip-flow screen with screwless

mounted screen mats avoids unnecessarycleaning and reduces maintenance times.• Screenbox discharge end can be

hydraulically raised 500 mm to facilitateefficient and easy media access and chang-ing.


Joint Venture Results inCombi Flip-Flow Screen

At the heart of the mobile plant is the two-deck German designed and construct-ed high performance screenbox. The stepped top deck design is combined withflip-flow technology on the bottom deck.

Page 34 • June 1, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Loftness Offers New TimberAx Skid Steer Attachment Loftness’s TimberAx skid steer

attachment is part of its VMLogixline of products. The TimberAxuses an exclusive knife system tocut grass, vines, brush or trees up to6 in. (15 cm) in diameter, or inter-mittently cut material up to 12 in.(30.5 cm) in diameter.The 17-in. (43 cm) rotor of the

TimberAx features a reverse-rota-tion design to lift material off theground for proper cutting. Unlikeforward-turning rotors, this designoffers improved cutting perform-ance and finer mulching withoutdriving uncut material into theground, according to the manufac-turer. The knives are constructed of

durable, low-maintenance alloyand can be sharpened directly onthe machine. An adjustable shearbar maintains a consistent distancefrom the knives to precisely controlmulch size.The TimberAx is available in

53-, 63-, 73- and 83-in. (134.6, 160,185.4 and 211 cm) cutting widthsand comes with a universal mount

for attaching to all major makesand models of skid steers. Nine dif-ferent hydraulic motor options areavailable to accommodate flowrates from 22 to 54 gpm (83 to 204Lpm).The drive system consists of a

three-groove banded belt withtaper-lock sheaves and a spring-loaded belt tensioner. Units also areequipped with heavy-duty, over-sized bearings with anti-wrap pro-tection.Other standard features include

an adjustable tree-pusher bar withclaw hooks, dual crossover reliefprotection, pressure gauge, steeldeflector chains, tachometer, spareparts kit and adjustable skid shoes.Options include a high-pressure,piston-type hydraulic motor.For more information, call

800/828-7624 or visit www.vm-logix.com.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

The 17-in. (43 cm) rotor of the TimberAx features a reverse-rotation design to lift material off theground for proper cutting.

Chicago Pneumatic Introduces RX 30,RX 38 Rig-Mounted Hydraulic BreakersChicago Pneumatic has launched the

RX 30 and RX 38 rig mounted, heavyhydraulic breakers. Practical for heavy industrial demo-

lition, building renovation, road con-struction, rock excavation, trenching,mine and quarry applications, the RX30 and RX 38 are powerful enough tohandle the most difficult applications,but also can be transported with ease,according to the manufacturer.“We have really engineered the per-

fect balance between power and tech-nology with these new models,” saidGreg Petherbridge, product manager ofhydraulic attachments of ChicagoPneumatic. “Contractors will be able toincrease productivity on the job sitethanks to these advanced technologybreakers.” As is the case with all breakers in the

RX series, the RX 30 and RX 38 fea-ture hybrid gas/oil technology andfewer moving parts for a lower mainte-nance hydraulic breaker. Also incorpo-rated in the RX line of rig mounted

hydraulic breakers are noise and vibra-tion dampening technology and aninternal control valve making the RXbreakers some of the quietest and mostpowerful on the market today. “There are a number of extra fea-

tures on the RX 30 and RX 38 break-ers, which make this an importantmachine for contractors,” saidPetherbridge. “For example, thePowerControl Plus feature enables theoperator to adjust the breaker’s per-formance according to the application.” Other features include a tie rod sys-

tem that uses tie bolts, an insert threadsystem that ensures a long working lifeand allows tie bolts to be reused, aswell as a central lubrication port forextended bushing life.

About the RX 30Featuring a service weight of 4,850

lbs. (2,200 kg), the RX 30 is ideal for awide range of applications. With animpact rate of up to 620 blows perminute (bpm) at 5,500 ft. lb. class, theRX 30 delivers power and performance

for demolition, construction, and min-ing. The RX 30 is specified for carrierswith a capacity of 55,100 to 88,200 lbs.(Carrier Class 25 to 40 t).

About The RX 38The RX 38 boasts an impact rate of

590 bpm at 6,500 ft. lb. class to effec-tively increase job site productivity.With a service weight of 5,740 lbs.(2,600 kg), the RX 38 is strong enoughto handle the roughest applications.Specified for carriers with a capacity of59,000 to 98,000 lbs. (Carrier Class 25to 43 t).Optional equipment is available for

breakers in the RX 14 to RX 53 range,including CP auto lube, an automaticbreaker mounted lubrication system forextended life of the bushing and work-ing tool. The RX also includes a ventedpercussion chamber that vents dustaway from the tool holder extendingbushing and tool life. For more information, visit

www.cp.com.

With a service weight of5,740 lbs. (2,600 kg), theRX 38 is strong enough tohandle the roughestapplications.

With an impact rate of upto 620 blows per minuteat 5,500 ft. lb. class, theRX 30 delivers power andperformance for demoli-tion, construction, andmining.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 1, 2013 • Page 35

Introducing the new Lokotrack ST2.4 mobile screen

Quality delivers precision

QnI

elia , the ST2.4 is built with high-ableand rating pos sition in just

e een that goe mobile scrokotrack ST2.4 is a vkw Lhe neT

d eviledytilauQn artokoLweehtgnicudortn

qual, the ST2.4 is built with high-obust . Repsw simple ste a f fe

-o opert tom transporeen that goes frt , compacersatileotrack ST2.4 is a v

noisicerpsrneercselibom4.2TSkca

E-mail: m .nam@metso minerals

etso or tibut distrMlenges e bn morear. Lsneed t espond to r t

dra viding the exibilito, prulicallyyhe an nd easy with saffe and easy with a scr

and e� eening media changes arcr. Sy �ciency com or mponents f for morit

elia , the ST2.4 is built with high-ableand r

.com.nam@metso

.yodaour local ting yy contace b

-eening chalent screro di erespond tou y yviding the exibilit

x that raises een boe and easy with a scre eening media changes ar

e uptime tivoduce pror mor-qual, the ST2.4 is built with high-

.met om.ctsowww

CRISP INDUSTRIES, INC.323 Energy Way • Bridgeport, TX 76426

940-683-4070 • 800-315-0871 • Fax: 940-683-2181South Texas 78155

830-625-6822Sequin, Texas 78155

830-372-1110

COMPASS EQUIPMENT4688 Pacific Heights Rd. • Oroville, CA 95695

530-533-7284 • 530-533-8610 • Fax: 530-533-7657www.compassequip.com

CONTRACTOR PREFERRED70% of all HydroSeeders® purchased by contractors today are

For Reliable Equipment to Get the Job Done, Call One of These Fine Dealers and Request

®

®

Perris, CA909-355-3600

Prescott, AZ928-778-5621

Gilbert, AZ480-545-2400

Tucson, AZ520-623-8681

Farmington, NM505-324-8601


El Paso, TX915-872-1001

www.roadmachinery.com

Dallas214-819-4100

Fort Worth817-626-2288

San Antonio210-648-4600

Longview903-758-5576

Austin512-388-2529

Houston713-937-3005

Mercedes956-565-0100

www.romco.comROMCO Equipment Co. hasacquired Conley Lott Nichols.

Both are Full Service Dealers for theEntire Finn Product Line, Including

HydroSeeders®

Straw Blowers

Bark Blowers


What’s going on in

YOUR COMPANY

We want to know!

Give us a call.

ConstructionEquipment

Guide

(800)523-2200

OR

FAX: (215)

885-2910

www.petersoncat.comNorthern California

888-738-3776Oregon/Southern Washington

800-452-7676

Chico, CARedding, CAFortuna, CAWillows, CAWillits, CA

Santa Rosa, CASan Martin, CASan Leandro, CAEugene, OR

North Bend, ORKlamath Falls, ORRedmond, ORMedford, ORAlbany, ORPortland, ORSalem, OR

The Dalles, ORLongview, WA

www.wagnerequipment.comAlbuquerque, NM

505-345-8411Aurora, CO

303-739-3000Burlington, CO719-346-7880

Colorado Springs, CO719-635-1669Durango, CO

970-259-2001El Paso, TX

915-821-7651Farmington, NM505-327-5331

Grand Junction, CO970-242-2834Hayden, CO

970-276-3781Hobbs, NM

575-393-2148Pueblo, CO

719-544-4433Windsor, CO

970-278-1750

www.tractorandequipment.comBillings, MT

406-656-0202Billings-Southgate, MT

406-245-4426Bozeman, MT406-585-5800Great Falls, MT406-761-7900Helena, MT

406-442-2990Williston, ND701-572-8377Worland, WY307-347-4747

www.louisianacat.com3799 W. Airline HwyReserve, LA 70084

985-536-0946Fax: 985-536-0950

Alexandria318-443-2577Bossier City

318-746-2341Hammond

985-340-2820Lafayette

337-837-2476Lake Charles

337-439-3601Monroe

318-323-1345Prairieville

225-673-3480Reserve

985-536-1211

www.ncmachinery.comSeattle, WA

425-251-5800Chehalis, WA360-748-8845

Fife, WA253-896-0878Monroe, WA

360-805-6000Mount Vernon, WA

360-424-4292Port Angeles, WA

360-452-9222Wenatchee, WA509-886-5561Yakima, WA

509-248-2371Anchorage, AK907-786-7500

Dutch Harbor, AK907-581-1367Fairbanks, AK907-452-7251Juneau, AK

907-789-0181Prudhoe Bay, AK907-659-9600Wasilla, AK

907-352-3400

Rare Earth (RE) drum separators from Eriez featureErium 3000, a high-quality rare earth permanent magneticpower source. Eriez RE drum separators purify large quan-tities of bulk materials such as foods, plastics, abrasives,metal powders, ceramic material, paper, glass cullet, sodaash, kaolin clay, chemicals, gypsum and quartz powder.They remove very fine ferrous particles, locked particles andeven strongly paramagnetic particles. Rare Earth drums areextensively used to concentrate weakly magnetic ores suchas ilmenite, specularite, garnet, siderite, wolframite andothers.Neodymium-boron-iron rare earth permanent mag-

nets develop magnetic fields up to 25 times strongerthan conventional ceramic or alnico units, with noincrease in size. The additional strength helps inremoving weakly magnetic or very fineiron contaminants from a wide variety offine dry bulk materials as well as slurries,according to the manufacturer. The increased strength at a greater dis-

tance, high gradients and increased holding force ofEriez RE drums allows them to hold magnetic or fine ironcontaminants so tightly that wipe-off by product flow is vir-tually eliminated. These drums are an ideal choice where

high product purity is required. Eriez RE drums are part of the complete line of drums

from Eriez, which includes standard models in diametersfrom 12 to 36 in. (30 to 91 cm), and widths from 12 to 120in. (30 to 152 cm). These units provide efficient separationon feed rates up to 100 tph (90.7 t).For more information, call 888/300-ERIEZ or visit

www.eriez.com.

Eriez RE Drum Separators ProvideProtection Against Contamination

Eriez RE drum separatorsremove very fine ferrous particles,

locked particles and even strongly para-magnetic particles.


Innovative American made no compromise

Join the revolution715-395-6060 www.exodusmachinesinc.com superior, wisconsin

BIG. Bad. fast. strong.

AVAILABLE.

The MX457130K lbs. 300 hp. 13,430lb@60’. 63’ 5” reach.

www.holtcat.com800-275-4658

Austin, TX • Bridgeport, TXCorpus Christi, TX • Fort Worth, TX

Irving, TX • Laredo, TXLewisville, TX • Longview, TX

North Dallas, TX • Pflugerville, TXSan Antionio, TX • Sonora, TX

Texarkana, TX • Tyler, TXVictoria, TX • Waco, TX

Weslaco, TX

www.johnson-machinery.comRiverside, CA951-686-4560

Fontana, CA909-574-6601

Indio, CA760-342-1597Murrieta, CA

951-696-1063Hesperia, CA

760-947-0967

www.mustangcat.comHouston, TX

713-460-2000Beaumont, TX409-892-8412

Bryan, TX979-775-7368

Bryan, TX979-775-0639

Channelview, TX281-452-7368

Conroe, TX936-756-1110El Campo, TX979-543-3389Freeport, TX

979-233-7368Houston, TX

713-462-9993Houston, TX

713-228-7368LaMarque, TX409-935-7000

Lufkin, TX936-639-5551

Lufkin, TX936-632-6775Nederland, TX409-722-7368

www.hawthornecat.com800-437-4228

Lakeside, CA • San Diego, CASan Marcos, CA • Hilo, HILihue, HI • Kailua Kona, HIKahului, HI • Waipahu, HI


Call David Spainhour in Dallas,TX214-688-0444 • Fax 214-630-5419

Email:[email protected]

MIDCODemolition

Tool CompanyPerforms a

Complete Teardown& Complete Rebuild

Including:1 - Remove the head.

2 - Pull the cylinder.3 - Hot pressure wash the entire unit.

4 - Polish piston & check tolerances. 5 - Rebuild & charge accumulator.

6 - Install all new seals. 7 - Repaint to spec.

8 - Install new chisel & bushing.9 - All hammers include new hoses, seals, chisel or moil points, paint, OEM decals

and final hammer testing.

Midco Offers the Finest in NewHydraulic Hammer and the Highest

Quality in Rebuilds!

SALES • SERVICE • PARTS

Some HammersAre Just Too

For Their Ads!Big

OEM REPAIR FACILITY - DALLAS, TX

MIDCO Demolition Tool Company...

Your “One-stop Shop” for New, Used and RebuiltHydraulic Hammers Plus Over 1,300 Hammer

Tools and Parts for Sale!

www.superior-ind.com

KING OF THE HILL

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?

McCOURT & SONSEQUIPMENT, INC.5141 Hwy 71 West

LaGrange, TX 78945979-242-5298888-838-9252

www.portablescreen.com

COMPASS EQUIPMENT INC.

4688 Pacific Heights RoadOroville, CA 95695530-533-7284530-533-8610

www.compassequip.com

Official dealer partnerin Texas, Louisianaand Mississippi.

Official dealer partner in Northern California.

POWER EQUIPMENT CO.500 E. 62nd Ave.Denver, CO 80216800-883-9284

www.power-equip.comLocations:Denver, CO

Colorado Springs, COGrand Junction, CO

Casper, WYAlbuquerque, NM


SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”

High Productivity – Low Operating Costs

Titan Machinerywww.titanmachinery.com

Denver, CO303-286-7000

Fargo, ND701-237-3333

Omaha, NE402-733-3700

Sioux Falls, SD605-336-3434

Modern Machinerywww.modernmachinery.com

Spokane, WA800-541-0754

Kent, WA800-669-2425

Rochester, WA800-304-4421

Portland, OR800-950-7779

Eugene, OR800-826-9811

Boise, ID 800-221-5211

Pocatello, ID 800-829-4450

Missoula, MT800-332-1617

Kalispell, MT800-434-4190

Billings, MT 800-735-2589

Bane Machinery Inc.www.banemachinery.com

Dallas, TX214/352-2468

Fort Worth, TX817/847-5894

Waukesha-Pearce Industries, Inc.

Corporate Office: 12320 So. MainHouston, TX 77035

713/723-1050 • Fax: 713/551-0798www.wpi.com

Tomball, TX281/351-9016

Kilgore, TX903/984-2011

Port Arthur, TX409/721-5305

Corpus Christi, TX361/884-8275

Edinburg, TX956/386-0107

San Antonio, TX210/648-4444

Pflugerville, TX512/251-0013

Buffalo, TX903/322-7150


Picking Station with Screen-It

Separate-It RWS 2000 Rock/Wood SeparatorRock-It Static Grizzly

6x16 2 Deck Screen-It

102x152 Track Mounted Impact Plant


Lokotrack LT1213 impactor plant

Lokotrack LT1213

Top capacity impactor plantMore versatility,more opportunities for you.

op

y and unifcapacite lookr’ouf yI

capTTop capacit

, taktsoducm end pror and unif foror a combination of incring f for a combination of incre look

ty impacop capacitokL

e a look at the , tak

eased crushing or a combination of incr

tor plantT1213otrack L LT1213ok

T

or tibutdistrabout the v

offorop pertmineral-based demolition debr

ith a single LWmethod that also incr

T12 he L LT1213 offTotrack LokL

.yodaor tour local Mt yT1213, contacersatile L LT1213, contacabout the v

t qualitoducmance and end pror, all while maintaining ismineral-based demolition debr

ou can crush both rT1213, y ngle L LT1213, your business opporeases ymethod that also incr

e impactivoduce prers a mor13 off fers a moror plant frty impacimarT1213 prk L LT1213 pr

etso our local Me n moro learTTo lear. yt qualit

, all while maintaining y ock and anou can crush both r

. tunitiesour business opport crushing e impac

. etsoom Mor plant fr

.metsowwwE-mail: minerals

om.c.metso.com.nam@metsoE-mail: minerals

CRISP INDUSTRIES, INC.323 Energy Way • Bridgeport, TX 76426

940-683-4070 • 800-315-0871 •

Fax: 940-683-2181

www.crispindustries.com [email protected] Texas 78155

830-625-6822

Seguin, TX 78155830-372-1110

WESTATEP.O. Box 50370 • Billings, MT 59105800-999-6676 • Fax: 406-373-6553

www.westate.com

COMPASS EQUIPMENT4688 Pacific Heights Rd. • Oroville, CA 95695

530-533-7284 • 530-533-8610 • Fax: 530-533-7657

www.compassequip.com

WHEELER CRUSHING SYSTEMSSalt Lake City, UT • Hurricane, UT

Ogden, UT • Vernal, UT800-779-4450

www.wheelercat.com/crushing



4428 E. Trent Ave.Spokane, WA 99212

800-541-0754www.modernmachinery.com

22431 83rd Ave. S.Kent, WA 98032800-669-2425

19444 Ivan Street SWRochester, WA 98579

800-304-4421

5241 N. E. 82nd Ave.Portland, OR 97220

800-950-7779

4610 Cloudburst WayEugene, OR 97402

800-826-9811

101 International Dr.Missoula, MT 29808

800-332-1617

3155 Highway 93 S.Kalispell, MT 59901

800-434-4190

7850 S. Frontage Rd.Billings, MT 59101

800-735-2589

390 N. 2000Lindon, UT 84042

801-796-6126801-796-6128

www.goodfellowcrushers.com

Boulder City, Nevada702-293-7504

F: 702-293-0529

San Bernardino, CA908-887-9800

F: 909-887-9888

Now Serving Idaho


CRANES

Crane Inspections

ALL TYPES OF CRANES

INSPECTED AND CERTIFIED

Accredited by the US Dept.

of Labor Under 29CFR Part

1919 and Accredited by

CALOSHA

Call 215-639-2579

Atlantic Crane

Inspection Services

Visit us at

www.atlanticcrane.com

CRAWLER TRACTORS

Crawler Tractors

1982 Dresser TD20E, OROPS,

24'' tracks, average condi-

tion..............................$29,500.

913-915-1607

EXCAVATORS

Hydraulic Excavators

2012 Kubota KX121, 39HP,

rubber tracks, 24'' bucket,

excellent condition ............Call!

2011 Kubota KX080, rubber

tracks, 30'' bucket, 221

hours.................................Call!

320-235-2717

2011 Hyundai R210-9LR, long

reach excavators, 60'' bucket,

like new, 1113 hours...$98,900.

209-466-5135

2004 Caterpillar 330CL, cab,

A/C, hyd thumb, good condi-

tion, 10,250 hours

..................................$112,500.

913-787-2371

FORKLIFTS

Rough Terrain Forklifts

2010 JCB 930, 4WD canopy

model, 6000 lb lift capacity, 22'

lift ITA 66'' carriage and 48''

forks. Pictures available, low

hours..................................Call

908-625-0697

LOADERS

Backhoe Loaders

2008 Yanmar CBL40A, 3 pt

hitch, PTO, backhoe loader

bucket with skid plate, very

good condition, 216 hours

....................................$31,000.

641-628-2000

JCB 214S, cab w/heat, 4WD,

4WS, 1 cu yd bucket, quick

coupler, 24'' bucket, front & rear

hydraulics, 1250 hours, pictures

available......................$28,500.

908-625-0697

Track Loaders

2007 Bobcat T300, 18'' tracks,

A/C, aux. hyds, tooth buck-

et.................................$29,000.

316-945-1015

MOTOR GRADERS

Graders

1978 John Deere 570A, 13'

blade, front scarifier, tall cab,

2406 hours .................$18,975.

TRACTORS

Agricultural Tractors

2008 New Holland T2310, 40

hp, diesel, MFWD loader, buck-

et, 2269 hours ...........$19,000.

2011 Kubota M126X, 126 hp,

MFWD, 18.4R-38, 158

hours..........................$70,000.

2011 Kubota M135X, 4WD,

cab, loader, 2806

hours...........................$64,900.

320-235-2717

TRAILERS

Drop Deck Trailers

2003 Trail King TK12, wood

deck, 2 axles, 4'

ramps.............................$3950.

316-945-1015

Classified...2 Insertions...95¢ Per WordUse the form below to place a classified ad in the Construction Equipment Guide. Itcould bring the inquiry for which you are looking.

One Word In Each Block

Classified Rates: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate theappropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment toConstruction equipment Guide.CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________

STREET______________________________________________________________________PHONE NO. _________________________________________________

CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________

TOLL FREE 1-800/523-2200FAX 215/885-2910

470 Maryland Drive • Fort Washington, PA 19034Email: [email protected]

HEADING (Category to place listing):

Check Enclosed VISA MASTERCARD AMERICAN EXPRESS

CARD NUMBER EXP. DATE

SIGNATURE OF AUTHORIZED CARDHOLDER

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online searchable database

for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

CLASSIFIEDS The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

Demolition Lease Units, 100% Warranty, As little as 3 to 6 hours on some units. 70,000 to 20,000 Lb.Excavators $20,000 to $50,000 call for quote

[email protected] 775-410-5237 11-12 AP

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualityRubber Tracks to fit over 3000 models of construction equip. PNEUMATICAND FLATPROOF SKIDSTEER TIRES also available. $95 Next day ship-ping to 23 states...........................................................................................Call

Summit Supply LLC888-888-1248 • [email protected] 11-12 TM



1947 INTERNATIONAL I4 W/ HOUGHLOADERCONTACT: JHONPHONE: 503-929-3241EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY THE FOLLOWINGCAT LOADERS: 9 2 0 (78 - 85) 9 3 0 (78 -86) 9 3 6 (84 - 92) 9 3 8 G (AROUNDYEAR 05) 9 5 0 B/C/E/F-II (78 UP) 9 5 0G/H (’05 – ’09, FULL STEERING ONLY) 96 6 C/D/E/F (78 UP) 9 6 6 H (’06 – ’09,FULL STEERING ONLY, HOURSAROUND 8000 OR LESS, ORIGINALPAINT) 9 8 0 C/F (87 UP)CONTACT: AIMNPHONE: +971504814823EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATORS AND DUMPTRUCKS |PLS. SEND QUOTATION FOR THE FOL-LOWING INCLUDING SHIPMENT GHANAPORT; 1. CATERPILLAR EXCAVATOR330BL- YEAR 2006 TO 2011 QUANTITY -1 - STATUS NEW 2. CATERPILLAREXCAVATOR 330CL - YEAR 2006 TO2011 QUANTITY -1 - STATUS NEW 3.CATERPILLAR EXCAVATOR 330DL-YEAR 2006 TO 2011 QUANTITY -1 - STA-TUS NEW 4. CATERPILLAR EXCAVATOR336DL - YEAR 2006 TO 2011 QUANTITY -1 - STATUS NEW 5.CATERPILLAR DUMPTRUCK CT6660 - YEAR 2006 TO 2011QUANTITY -1 - STATUS USED/NEWCONTACT: MOSES OWHAROPHONE: 233244822835FAX: +233302766545EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE LOADER BACKHOES | 580E, K,SK, L, SL, M, SMCONTACT: TRICO EQUIPMENT: FRANKPHONE: 800-654-8733FAX: 732-780-3618EMAIL:[email protected]––––––––––––––––––––––––––––––––ANY LONG REACH BOOMS OR STICKS.LONGER THEN NORMAL BOOM ORSTICK. LONG REACH EXCAVATORFRONTSCONTACT: TYLER PALUMBOPHONE: 330-365-0654EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED ALL THE TIME 12 MONTHSHEAVY EQUIPMENT USER OR SALES-MAN | NEEDED ALL THE TIME 12MONTHS EXCAVATOR BULLDOZERGRADER CRANE BOBCAT PEPINE ENCCAB FROM USER SALEMAN BANKREPOSESS LOW HOURS2006AND UPCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975 ORMOB 1-514-386-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––

WANT TO BUY BOBCAT BRAND SKIDSTEER LOADERS LOCATED IN THESOUTH EASTERN UNITED STATES.PREFER LARGE FRAME MACHINESEQUIPPED WITH THE "GOLD PACK-AGE", BUT WILL CONSIDER ANY SIZEBOBCAT YOU MAY HAVE FOR SALE.SEND PHOTOS AND ASKING PRICE.***DEALERS, DO NOT WASTE MY TIMEOR YOURS RESPONDING TO THIS AD***CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––VERMEER S800TXCONTACT: STEVEEMAIL: [email protected]––––––––––––––––––––––––––––––––THUMB FOR A IHI 28N MINI EXCAVATORCONTACT: RUSS MUELLERPHONE: 414-587-9808EMAIL:[email protected]––––––––––––––––––––––––––––––––ALWAYS SEEKING TO PURCHASEUSED HYDRAULIC VIBRATORY PILEHAMMERS. IF YOU HAVE A USEDHYDRAULIC PILE HAMMER THAT YOUWANT TO SELL, WE ARE YOUR BESTOPTION AND WE OFFER QUICK DEALCLOSING. SEND PHOTOGRAPHS ANDSPECIFICATIONS FOR CONSIDERATIONAT [email protected]: JEFF LAWSONPHONE: 864-542-4369EMAIL: [email protected]––––––––––––––––––––––––––––––––BUCYRUS ERIE 15H SERIES II UNDER-CARRIAGE PARTS, NEWCONTACT: RAND URMSTONPHONE: 973-334-1103FAX: 973-402-8122EMAIL:[email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO PURCHASE NEWOR USED SERVICE, SHOP, PARTS,OPERATOR’S OR OTHER MANUALSFOR EQUIPMENT, TRUCKS AND VEHI-CLES OF ALL SORTS. WE PREFER INBULK, PERHAPS YOU HAVE COMPUT-ERIZED YOUR SERVICE OR PARTSOPERATION AND YOU HAVE BOOKSOR MANUALS YOU NO LONGER NEED,OR INVENTORIES YOU HAVE NOTSOLD. PERHAPS AS A DISCONTINUEDPRODUCT LINE. WE WILL PURCHASEIN ANY USEABLE CONDITION IN ANYAMOUNT YOU HAVE.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––KAWASAKI WHEEL LOADER 65Z, 70Z,80Z, 85Z, 90Z AND 95Z (II, AND IV) 1998AND UP MODELCONTACT: STEVEPHONE: 281-491-0614FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––

CAT MOTOR GRADER 140G, 160H, 14GAND 14H | I WANT TO BUY ABOVEGRADER WITH REAR RIPPER ANDORIGINAL PAINT.CONTACT: ABDAL SALLEMPHONE: 96638428312FAX: 96663312326EMAIL:[email protected]––––––––––––––––––––––––––––––––NEW HOLLAND AND BOBCAT SKID-STEERS | ANYTHING FROM LATEMODEL TO HIGH HOURED BARN YARDMACHINES.CONTACT: CODYPHONE: 1-810-834-2571EMAIL:[email protected]––––––––––––––––––––––––––––––––TRENCHER VERMEER T755 IIIBRAND NEW OR USED LOW HOURSCONTACT: JAY JUNGPHONE: 909-393-9086FAX: 909-393-8296EMAIL:[email protected]––––––––––––––––––––––––––––––––USED CAT EXCAVATOR ENGINE.ARRANGEMENT NUMBER 9Y8862CONTACT: FRANK CALABRESEPHONE: 304-232-1333FAX: 304-233-1333EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR D7G DOZER WITH RIP-PER OR WINCH, STANDARD SHOES(NO LGP), S BLADE (NO ANGLE BLADE)CONTACT: NATACHAEMAIL: [email protected]––––––––––––––––––––––––––––––––BUCKET, 18:OR 24 QUICK ATT | 110 TLBJOHN DEERE BUCKET#LVB25751&LVB25749CONTACT: RANDY SURRETTPHONE: 775-849-7841EMAIL: [email protected]––––––––––––––––––––––––––––––––GOOD USED TENNANT 6600 SWEEPER.CONTACT: TOM BILLINGTONPHONE: 314-489-0960EMAIL: [email protected]––––––––––––––––––––––––––––––––

NEED THE CATALOG FOR COMPLETEGOLD MINE EQUIPMENT AND THEIRPRICES. PLEASE SEND TO MY HOMEADDRESS AT 128 WEST 128 STREETAPT4G, NEW YORK, NY 10027CONTACT: MOUSTAPHA MAGASSOUBAPHONE: 212-470-2282EMAIL:[email protected]––––––––––––––––––––––––––––––––GRAPPLE BUCKET OR RAKE FOR AVOLVO L90ECONTACT: JAY WESTPHONE: 936-641-2933FAX: 281-576-0919EMAIL:[email protected]––––––––––––––––––––––––––––––––GEHL TELEHANDLER 6000 TO 8000 LB34 TO 42 REACH 3200 HOURS TO 4500HOURS UNDER $18, 000CONTACT: ROBERT GAYPHONE: 816-487-2089EMAIL: [email protected]––––––––––––––––––––––––––––––––5TH DITCHING BUCKET FITS CAT315CLCONTACT: PAUL WISSMILLERPHONE: 6305468296EMAIL: [email protected]––––––––––––––––––––––––––––––––DUMPER | 6-9 TON OFF-ROADDUMPER. WACKER/BENFORD.CONTACT: TOMPHONE: 215-624-2221FAX: 215-331-5870EMAIL: [email protected]––––––––––––––––––––––––––––––––TCM 820 AND OR 806CONTACT: JUSTINPHONE: 561-312-4577EMAIL:[email protected]––––––––––––––––––––––––––––––––NEEDED NOW D8L D9L D10 WITH RIP-PER NOT ADVERTISED USER LOWPRICE | NEEDED ALL THE TIME D6 D7D8 D9 D10 BULLDOZER WITH RIPPERUSA USER. EAST OR WEST COAST.NEED FAST WELCOME SALESMAN BUTDOWN PRICE. BUY AND SELL TO ME. CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––55N2 IHI | NEED A FINAL DRIVE MOTOR# ON UNIT GM09VN-B-19-34-3MSP00265B SN# 05600910 GEARS AREGOOD, DRIVE SHAFT IS STRIPPED. CONTACT: RICKYPHONE: 318-508-1515EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATOR | WE WANT A TATA/JCB/L&T EXCAVATOR OF SMALL OR MEDIUM SIZECONTACT: DAMANDEEP SINGHPHONE: 098725-94234FAX: 0181-2700075EMAIL:[email protected]––––––––––––––––––––––––––––––––

T SERIES LIKE T190, T300 BOBCATCORES | LOOKING FOR T SERIES T190& T300 AND OTHERS DRIVE CORES.ALSO SOM, & COMER DRIVE CORES.CONTACT: HAROLDPHONE: 281-715-2535FAX: 866-593-6405EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU WA1200, LOW HOURED.ONLY COMPANIES WITH FULL NAME,COMPANY NAME, TELNR AND WEBSITEWILL BE TAKEN SERIOUSLY.CONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––SKID STEER BOBCATCONTACT: DERRICK SIMPSONPHONE: 9108744160EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU WA65 ENGINE | LOOKINGFOR AN ENGINE FOR A KOMATSUWA65 WHEEL LOADER. ENGINE MODEL4D94E/1HCCONTACT: BOBPHONE: 610-377-0372EMAIL: [email protected]––––––––––––––––––––––––––––––––CAB ENCLOSURE KUBOTA KX1213 |WANT TO BUY NEW OR USED CABENCLOSURE FOR A KUBOTA KX121-3SUPER SERIES MINI EXCAVATOR.CONTACT: MIKE MOOREPHONE: 5708987347EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR WHEEL LOADERS. CAT950 FII OR 950 G OR 950 H. FROM 1996UP TO 2007. FULL STEERING AND A/CIS REQUESTED. CONTRACTORSOWNED & WHOLESALE ONLYCONTACT: AYYAZ ALLAMEMAIL: [email protected]––––––––––––––––––––––––––––––––PEGSON METROTRAK OR EXTEC C10TRACK JAW CRUSHER | MID 2000YEAR, LOW HOUR, USA LOCATION,GOOD COND. JOB READYCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––USED L&T KOMATSU PC210-EC8CONTACT: MAHADEO KASGAVADEPHONE: 8888870877EMAIL:[email protected]––––––––––––––––––––––––––––––––·KOMATSU WA250 | NEED TRANSMIS-SION FOR WHEEL LOADER KOMATSUWA250 PART NUMBER 714-13-10041CONTACT: EVGENYPHONE: +7 924 690 48 86EMAIL: [email protected]––––––––––––––––––––––––––––––––

HITACHI EX60UR MINI EXCAVATOR, S/N 091-28394, 4115 HOURS, POWEREDBY ISUZU DIESEL, RUBBER TRACKS,NEEDS A RIGHT SIDE HYDRAULICDRIVE TRAVEL MOTORCONTACT: CLIFFPHONE: 724 736-4546EMAIL:[email protected]––––––––––––––––––––––––––––––––LAMBSLEEM NIGERIA LIMITED | OIL &GAS WE HAVE AGO CRUDE BOONINGLIGHT FARCADO AND LSPO ALL INTTO, TTI, CIF NO MONEY IS NEEDEDUNTIL AFTER AGREEMENT ISREACHED AND SIGNED.CONTACT: PETER MORDIPHONE: TEL:+234-8032472242EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAW |LATE MODEL, LOW HOUR, USA LOCATIONCONTACT: RICHARDPHONE: 603 828 6100EMAIL: [email protected]––––––––––––––––––––––––––––––––STONE SLINGER TRUCKCONTACT: ROYPHONE: 2502030134EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED ALL THE TIME BULLDOZERD3AT D10 LOW HOURS USER OR BANKREPOSESS KOMASTU 51 655 85 155355 745 NO JUNK LOW LOW HOURSAND GOOD PRICE BUY AND SELLCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT 330BL | LOOKING FOR CAT 330BLFOR A REASONABLE PRICE BECAUSEAM ACTING AS AN AGENT FOR ACLIENT TO BUY 3-5 OF THIS TYPE OFMACHINES ASAP, LONGEST IS 3 DAY.CONTACT: KAMIL HIDIRPHONE: 404-484-1685EMAIL: [email protected]––––––––––––––––––––––––––––––––EXCAVATORSPHONE: 9951110408EMAIL: [email protected]––––––––––––––––––––––––––––––––INTERESTED IN A CATERPILLAR D3LOW HOURS 1989-2000 AND OR JOHNDEERE 450 SAME. I WANT A MACHINETHAT NEEDS NO WORK, READY TOWORK. WANT AT LEAST 3000 HRS ORLESS OR A NEW REMANUFACTUREDENGINE AND TRANSMISSION, NOT ASHOP REBUILD. I WOULD ALSO LIKEFRESH PAINT OR ORIGINAL IF NOT ALLRUSTED UP. I AM IN THE MARKET TOBUY NOW NOT 2 WEEKS FROM NOW.CONTACT: ALAN OYEREMAIL: [email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website

for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.


ALEX LYON & SON

AUCTIONEERS

www.lyonauction.com

315-633-2944�

• Somerset, PA

Sat., June 8, 2013For: Construction Equipment,Prime Commercial &Residential Parcels of RealEstate

• Queretaro, Mexico

Fri., June 14, 2013For: Construction Equipment,Asphalt and Vibratory Rollers

• Pulaski, NY

Sat., June 15, 2013For: Farm and LightConstruction Equipment

• Houston, TX

Mon., June 17, 2013For: Construction Equipment,Water Trucks, Aerial andAttachments

• Houston, TX

Tues., June 18, 2013For: Construction Equipment,Forklifts, Aerials, Water Pumps,Trucks and Trailers

• Odessa, TX

Thurs., June 20, 2013For: Construction Equipment,Aerials, Forklifts, Welders andAttachments

• Atlantic City, NJ

Sat., June 22, 2013For: Construction Equipment,Forklifts, Trucks and Trailers

• Las Vegas, NV

Thurs., June 27, 2013For: Complete Liquidation ofAggregate Operation

• Bangor, ME

Sat., June 29, 2013For: Construction Equipment,Attachments, Support, Trucksand Trailers

• Syracuse, NY

Sat., July 13, 2013For: Annual Hay Camp andLarge Rental Return Auction

• Detroit, MI

Fri., July 19, 2013For: Construction Equipment,Trucks and Trailers

• Cleveland, OH

Fri., July 19, 2013For: Straight Trucks, TruckTractors, Forklifts, Skid Steers,Trucks and Trailers

• Western NY

Sat., August 24, 2013For: Construction and BoringEquipment, Attachments,Support

• Boston, MA

Sat., September 21, 2013For: Complete Liquidation,Construction Equipment,Attachments, Pickups & ServiceTrucks, Truck Tractors &Trailers

RITCHIE BROS.

AUCTIONEERS

www.rbauction.com

402-421-2631

• North East, MD

June 4, 2012

• Sacramento, CA

June 4, 2013

• Lo Angeles, CA

June 6, 2013

• Detroit, MI

June 6, 2013

• Sylmar, CA

June 7, 2013

• Salt Lake City, UT

June 11, 2013

• Tipton, CA

June 13, 2013

• Nashville, TN

June 13, 2013

• Denver, CO

June 14, 2013

• Phoenix, AZ

June 18, 2013

• Hartford, CT

June 18, 2013

• Houston, TX

June 19-20, 2013

• Columbus, OH

June 20, 2013

• Bozeman, MT

June 21, 2013

• El Paso, TX

June 25, 2013

• Raleigh-Durham, NC

June 25, 2013

• Davis, WV

June 26, 2013

• Atlanta, GA

June 27, 2013

• St. Louis, MO

June 28, 2013

COLLAR CITY AUCTIONS

www.collarcityauctions.com

�518-895-8150

• Troy, NY

Thurs., June 20, 2013For: Complete Liquidation ofTree & Landscape Company

COMMONWEALTH

OF PA AUCTIONS

www.pentonequipmentauctions.c

om

• Online Only

Tues., June 18, 2013For: Spring Heavy EquipmentAuction

DAVIS AUCTIONS

www.davisauctionsinc.com

�203-758-4087

• Prospect, CT

Sat., June 22, 2013For: Utility and ConstructionEquipment

DEANCO AUCTIONS

www.deancoauction.com

601-656-9768

• Philadelphia, MS

July 17-18 2013For: Construction Equipment


September 18-19, 2013For: Construction Equipment


November 20-21, 2013For: Construction Equipment

DEL PETERSON &

ASSOCIATES

www.delpeterson.com

�800-492-9090

• Online Only

Tues., June 4, 2013For: Construction Equipment

• Online Only

Tues., June 11, 2013For: Construction Equipment

DON SMOCK

AUCTION CO., INC.

www.dsa-auctions.com

765-778-9277

• Pendleton, IN

June 21, 2013For: Construction Equipment

• Pendleton, IN

September 20, 2013For: Construction Equipment

• Pendleton, IN

December 13, 2013For: Construction Equipment

EURO AUCTIONS USA

www.euroauctions.com

�770-683-3883

• Atlanta, GA

June 26, 2013For: Construction Equipment &Trucks

HENDERSON AUCTIONS

www.hendersonauctions.com

225-686-2252

• Alexandria, LA

Thurs., June 6, 2013For: Construction and AsphaltEquipment

HESS AUCTIONEERS

www.hessauctioneers.net

�866-511-2493

• Thorndale, PA

Tues., June 11, 2013For: Trucks and Trailers

HUNYADY AUCTION COMPANY

www.hunyady.com�800-233-6898

• Stoystown, PA

Thurs., June 20, 2013For: Complete LiquidationShade Enterprises Inc.

IRAY AUCTIONS

www.iraymn.com�320-968-7230

• Foley, MN

Friday., June 7, 2013For: Construction Equipment

• Foley, MN

Friday., September 13, 2013For: Construction Equipment

• Foley, MN

Friday., December 6, 2013For: Construction Equipment

IRON PLANET AUCTIONS

www.ironplanet.com�888-433-5426

ONLINE AUCTIONSGo to www.ironplanet.com toview the complete auctionschedules, inspection reportsand to place your bid!

• ONLINE ONLY

Thurs., June 6, 2013For: Construction Equipment

• ONLINE ONLY


J.J. KANE AUCTIONEERS

www.jjkane.com�855-GO2-KANE

• Dallas, TX


• Philadelphia, PA

Sat., June 8, 2013For: Construction Equipment

• Portland, OR


• West Palm Beach, FL


• Lansing, MI

Sat., July 13, 2013For: Construction Equipment

• South Beloit, IL

Sat., July 20, 2013For: Construction Equipment

• Charlotte, NC

Thurs., July 25, 2013For: Construction Equipment

• Worcester, MA

Sat., August 3, 2013For: Construction Equipment

J.M. WOOD

AUCTION COMPANY

www.jmwood.com�800-447-7085

• Montgomery, ALWed.-Thurs., June 12-13, 2013For: Asphalt Equipment

• Montgomery, ALFri.- Sat., June 28-29, 2013For: Alabama Department ofTransportation

KEENAN AUCTION COMPANY

www.keenanauction.com207-885-5100

• Augusta, METues.-Wed., June 11-12, 2013For: Construction Equipment,Aggregate & Paving Equipment,Trucks

MARTIN & MARTIN

AUCTIONEERS, INC.

www.mmaauction.com�800-763-2728

• Pelzer, SCWed., June 19, 2013For: Construction Equipment

• Princeton, WVWed., June 26, 2013For: Construction Equipment

• Fort Mill, SCTues., July 30, 2013For: Construction Equipment

MEEKINS AUCTION

COMPANY

www.meekinsauction.com�800-499-6560

• Mount Airy, NCWed., July 24, 2013For: Construction Equipment

NORTH COUNTRY AUCTIONS

www.northcountry-auctions.com603-539-5322

• Wrentham, MAFri.-Sat., June 7-8, 2013For: Heavy Equipment

PETROWSKY

AUCTIONEERS INC.

www.petrowskyauctioneers.com�860-642-4200

• Franklin, CTThurs.-Sat., June 20-22, 2013For: Major Public EquipmentAuction

• Roselle, NJThurs., July 18, 2013For: Major Public EquipmentAuction

• Ponce, Puerto RicoTues, September 10, 2013For: Concrete Plant andComponents

PURPLE WAVE AUCTION

www.purplewave.com�866-608-9283

• ONLINE ONLYThur., June 13, 2013For: Construction Equipment

• ONLINE ONLY

Thur., June 20, 2013For: Construction Equipment

• ONLINE ONLY

Thur., June 27, 2013For: Construction Equipment

• ONLINE ONLY

Fri., June 28, 2013For: Construction Equipment

RITCHASON AUCTIONEERS

INC.

www.ritchason.com

�800-806-3395

• Lebanon, TN


UTILITY AUCTIONS

www.utilityauctions.net

�302-530-9103

• Wilmington, DE

Sat., June 8, 2013For: Construction, Utility andForestry Equipment

VAUGHAN AUCTION GROUP

www.vaughanauctiongroup.com

�903-873-6777

• Wills Point, TX

Fri., June 28, 2013For: Spring Contractor’s PublicAuction

WAYNE PIKE

AUCTION COMPANY

www.waynepikeauction.com

763-389-2700

• Princeton, MN


• Princeton, MN

Sat., September 14, 2013For: Construction Equipment

• Princeton, MN

Sat., December 7, 2013For: Construction Equipment

WOLFE INDUSTRIAL

AUCTIONS, INC.

www.wolfeauctions.com

�800-443-9580

• York Springs, PA

Friday, June 14, 2013For: Southern PA ContractorsAuction

YODER & FREY

AUCTIONEERS, INC.

www.yoderandfrey.com

�419-865-3990

• Newport, NH


AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com



Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauctionlive.com

Sales Managers & Auctioneers, Inc.

ALEX

LYON & SON

TUES., JUNE 18 @ 12:00 NOON

NOTE: Hertz Equipment Rentals, as in the past, is having their semi-annualauction on site and is selling late model equipment from their rental fleet tomake room for brand new equipment.

HILITES INCLUDE: 2 CARRY DECK CRANES: (2) 2006 Shuttlelift3330FL, 6 HYDRAULIC EXCAVATORS: 2005 JD 330CLC, (4) 2006Bobcat 331, 2006 Takeuchi TB135, 23 WATER PUMPS: (2) 2008-(2) 2007Pioneer SC108S17 10in., (2) 2007 Pioneer SC10X8S1 10in., 2006 Pioneer PPTP63C1 6in., (7) 2007-(2)2006-(4) 2005 Pioneer PP63C17L 6in., (3) 2005 Pioneer PP63 6in., 3 TRACTOR LOADER BACK-HOES: (2) 2007 JD 310J (4x4), 2007 Case 590 Super M (4x4), 6 SKID STEERS: (2) 2006 Bobcat S220,(2) 2006-2005 Bobcat S175, 2006 Bobcat S130, 6 TELESCOPIC FORKLIFTS: (5) 2006 Skytrak 8042,2006 Genie GTH-844, ROUGH TERRAIN FORKLIFTS: 2006 IR RT708J, 5 FORKLIFTS: (4) 2006Toyota 7FDU35, Linde H18CD, 7 BOOM LIFTS: 2006 JLG 800A (4x4), 2006-1005 JLG 400S (4x4),(3) 2006-2005 Genie S40 (4x4), 17 SCISSOR LIFTS: Genie GS2646, (11) Genie GS1930, (2) JLG2032E2, 2005 Skyjack 3226, (2) Snorkel SL20, 7 GENERATORS: 2006 IR G260, 2005 Multiquip DCA-70USI, 2005 Multiquip DCA-70SSJ, (2) 2006 Multiquip DCA-25USI, 2005 Multiquip DCA-25SSI, 2005Magnum MLG29, 7 WELDERS: (7) 2006 Lincoln SAE-400, 26 LIGHT PLANTS: (11) 2006- (5) 2005Genie TML-4000N, (6) 2006-2005 IR LS6KW, 2006 Magnum MLT4060, 2005 Wacker LT4, 2006Allmand Night Light Pro, 7 AIR WINCHES: 2011 Thern TA10, 2011 Thern TA-36, 2008 Thern TA7-30AX1, (3) 2006 IR WB1142K, 2011 IR K6UL-36, LOADER LANDSCAPE TRACTOR: 2008 KubotaB26 (4x4), 4 BOOM TRUCKS: (4) 2006 Int’l. 4200 w/National 18 ton (s/a), 5 SERVICE TRUCKS:2011 Ford F550 (4x4), (3) 2006-2005 Ford F550 (4x4), 34 PICKUPS: 2005 Ford F250, 2007 Ford F150(4x4), (21) 2006-(6) 2005-(2) 2004 Ford F150 (4x4), (3) 2006 GMC 1500, 48 UTILITY VEHICLES: (2)2007-2006 Bobcat 2200 (4x4), (7) 2007 JD Gator HPX (4x4), (8) 2007 JD Gator, (5) 2007 Gator RTV900(4x4), 2007 Kawasaki Mule 3010 (4x4), 2007 Kawsaki KAF620 (4x4), (4) 2007 Club Car XRT1550G,2007-2006 Club Car XRT1500 (4x4), (3) 2007 Club Car Precedent (4x4), (3) 2007 Club Car 07DS (4x4),2007 Taylor SS5-36, (2) 2007 JD XUV454, (7) 2007-2006 EZ- Go (4X4), 3 UTILITY TRAILERS:2007 EZ Dump UT5X8BOX (s/a), 2006-2004 best 5X8US, WATER TRAILER: 2006 Wylie W1245-S,ATTACHMENTS: Tractors: 2008 Kubota Backhoe, 2009 Rotary Mower, SUPPORT EQUIPMENT:(3) New Mustang LF88 Plate Compactors, New Mustang ML80S Rammers, New Mustang Core Drills,New Mustang Concrete Vibrators, New Mustang MP3 3in. Water Pump, (3) New Mustang MP4800 2in.Submersible Pumps, (3) New Mustang CV3500 Concrete Vibrators, (12) New 3pc. 14in. DiamondBlades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4 packs of 10,000lb. Ratchet Cargo Straps,New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie 11218 SDS Hammer Drills, (4) New 1in. DriveAir Impact Wrenches, (4) New 1/2in. Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge WaterHoses, (4) New Stiff Neck Pintle Hitches, Airless Paint Sprayers, Chipping Hammers, Brush Mowers,Impact Wrenches, Core Drills, Floor Grinders, Levels, Generators, Qty. Honda – Multiquip – Versamat-Zoeller 2in.- 4in. Pumps, IR & Wacker Generators, Master & Tradesman Heaters, Qty. MI-TM PressureWashers, Multiquip Plate Compactors, Hydrostat Pumps, Pipe Threaders, Hand Saws, Texas Air Movers,TPW Test Pumps, Wacker Rammers & Plate Compactors.

Address: 1002 Clay Court, Deer Park, TX 77536.DIRECTIONS: From IAH International Airport: JFK Blvd. 3.1 miles, merge onto Sam Houston TollwayE/ Texas 8 Beltway E via ramp on the left 24.1 miles, exit toward TX-225/ Deer Park/Houston .3 miles.Merge onto East Sam Houston Pkwy S/ Texas 8 Beltway S, left onto Pasadena Freeway Frontage Rd. .2miles. Take ramp on left onto TX-225 E 3.1 miles. Take exit toward Battleground Rd. .2 miles, merge ontoPasadena Freeway Frontage Rd. .2 miles. Right onto S Battleground Rd. .3 miles, 1st right onto ThirteenthSt., 1st right onto Clay Ct. .2 miles. Site on right. LOCATION: At the Hertz Facility in Deer Park.

TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H LyonSALE SITE PHONE: (863) 259-0255

RENTAL FLEET AUCTIONLATE MODEL RENTAL FLEET CONSTRUCTION

EQUIPMENT, WATER TRUCKS, AERIALS, ATTACHMENTS & SUPPORT EQUIPMENT

Hertz EquipmentRentals AUCTION

HOUSTON(Deer Park),

TEXAS

MONDAY, JUNE 17 @ 12:00 NOON

NOTE: Selling will be late model construction equipment, aerials, latemodel water and truck tractors from various local rental houses.

HILITES INCLUDE: 13 HYDRAULIC EXCAVATORS: 2009 Cat336DL, Cat 321DL, 2007 Cat 321CLCR, Cat 320CL, 2008 Cat 301.8, (2)2008-2007 Komatsu PC200LC-8, Linkbelt 330LX, (2) Terramite TSC-6,Kubota KX41-2, 2009 JCB 8025, 4 MOTOR GRADERS: 2009-2008Cat 12M, Cat 12H, Komatsu GD850/ ripper, RUBBER TIRED LOADER: 2007 Cat 930G, 8CRAWLER TRACTORS: Cat D6RXL, Cat D6MLGP, Cat D6NXL, (2) 2009 Cat D5KXL, Cat D5G, CatD5C, Komatsu D61PX, 23 TRACTOR LOADER BACKHOES: 2005 Case 590 Super M (4x4), Case580M (4x4), (2) Cat 420D (4x4), (10) Cat 416D (4x4), JD 310G (4x4), (2) NH LB75 (4x4), (4) VolvoB60, Terramite T5C, 5 VIBRATORY ROLLERS: IR SD105, IR SD100D, 2005 IR SD70D, IR SD40,SuperPac 600P, RUBBER TRACKED SKID STEER: 2007 ASV RC100, 5 SKID STEERS: 2011 JD318D, (2) Bobcat S185, Bobcat S175, Bobcat S175, 5 BOOM LIFTS: 2008 JLG 450AJ-4, JLG E400A,Genie S65 (4x4), 2006 Genie S60 (4x4), Snorkel TB37, SCISSOR LIFT: Genie 4390(4x4), 4 AIR COM-PRESSORS: (2) 2007 Atlas Copco 185CFM, Sullivan 185CFM, IR 100CFM, WELDERS, GENERA-TORS, WATER PUMPS: 2007 Pioneer PP10, SCREENING PLANT: Extec 5000S, LOADER LAND-SCAPE TRACTOR: New NH T1530 (4x4), 2 SWEEPERS: 2004 Terramite TSS38, Terramite TSS38, 2BOOM TRUCKS: 2000 Int’l. 4700 (s/a), 1999 Freightliner FL70 (s/a), 2 WATER TRUCKS: 2002Sterling 4000gal. (t/a), 2000 Sterling 2500gal. (s/a),7 TRUCK TRACTORS: (4) 2009 Mack CHU613(t/a), 2007-2006 Peterbilt 379 (t/a), 1990 Western Star (tri.), 3 SERVICE TRUCKS: (2) 2006-2005 FordF550 (4x4), FUEL/ LUBE TRUCK: 2004 Int’l. 4300, 3 DETACHABLE GOOSENECK TRAILERS:(3) 2013 Witzco RG50 50 ton (tri.), APPROX. 10 NEW AUTOMOBILES/ TRUCKS/ VANS: (NOTE:THE FOLLOWING WERE AFFECTED BY HURRICANE SANDY, more will be added): New 2013BMW X6 35I, (2) New 2013 Mini Cooper, New 2013 GMC Savanna, UTILITY VEHICLES: (2) 2011Kawasaki Mule, 2009-(3) 2008 Club Car XRT1550, ATTACHMENTS: Skid Steers: Smooth, Snow &Mulch Buckets, 66in.- 78in. Buckets, New Versatech Grapple Buckets, New Versatech Hay Spears, NewPallet Forks, New Fork Frames, New Versatech Brush Grapples, New Stump Buckets, Unused Stout SkidSteer Plates & Hitch Plates, Pallet Forks, Lowe Hydr. Augers, Stout Brush Grapples & Bucket Grapples,SUPPORT EQUIPMENT: New Mustang LF82 Plate Compactor , (4) New Mustang LF88 PlateCompactors, New Mustang ML80S Rammers, New Mustang M30 Core Drill, New Mustang MP3 3in.Water Pump, (3) New Mustang MP4800 2in. Submersible Pumps, (3) New Mustang CV3500 ConcreteVibrators, (12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, New Huskie 11218SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in. Drive Air Spray Gun Kits,(6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff Neck Pintle Hitches.

Address: 8215 FM 1488, Magnolia, TX 77354.DIRECTIONS: From Bush International Airport: Airport exit on JFK Blvd., take left ramp onto WillClayton Parkway toward Central Cargo .2 miles. Continue on Jetero Blvd., continue on McKaughan Rd.,left on Viscount Rd., left Mecom Rd. Take ramp onto JFK Blvd. toward Airport exit (I-45)/ Beltway 8/Hardy Toll Rd. 2 miles. Take ramp onto Hardy Toll W toward Hardy Toll Rd. (tolls) for 2.9 miles. TakeHardy Toll Rd. North/ Woodlands exit onto Hardy Toll N (tolls) – 11.9 miles. Merge onto I-45 N for 8.4miles. Exit #81/ Magnolia (FM-1488) toward Magnolia (I-45 S)/ Hempstead .3 miles. Take ramp onto I-45S .2 miles, take ramp onto FM 1488 Rd. (FM-1488) toward I-45 N/ Sherbrook Dr. .3 miles. Take ramponto North Fwy toward I-45 N .2 miles. Take ramp onto FM 1488 Rd. (FM-1488) toward Magnolia (I-

45S) Hempstead for 8 miles. Site is on left.


LATE MODEL RENTAL FLEET CONSTRUCTIONEQUIPMENT, WATER TRUCKS, AERIALS, ATTACHMENTS & SUPPORT EQUIPMENT

AUCTIONHOUSTON (Magnolia),

TEXAS


To view our Business Calendar online, go to www.constructionequipmentguide.com.

AGC ST. LOUIS IF IT’S NEW, IT’S HERE!CONEXPO-CON/AGG will represent an immense unveiling of all thenewest equipment, technology and product breakthrough in construc-tion. From earthshaking big iron to groundbreaking innovations, it’s allassembled in one place to help you work smarter. CONEXPO-CON/AGG2014 – If it’s new, it’s here!

CONEXPO – CON/AGG 2014 – if it’s new, it’s here!MARCH 4 thru 8, 2014

LAS VEGAS, NEVADA USALAS VEGAS CONVENTION CENTER

CONEXPO-CON/AGG 2014 WILL FEATURE:. 2,400 exhibitors showcasing new products and technologies from forevery major construction industry including asphalt, aggregates, con-crete, earthmoving, lifting, mining, utilities and more.. Over 130,000 attendees that range from contractors, to dealers &distributors, to service providers, engineers, producers, municipalities,and more. . A comprehensive education program during the five-day expositionwith sessions emphasizing industry issues and trends, managementand applied technology.

For more information, please contact AGC of St. Louis, 6330 KnoxIndustrial Drive, Suite 200, St. Louis, MO - Phone: 314/781-2356;Fax: 314/781-2874.

AGC of Minnesota – ANNUAL MEETING COMMITTEEAre you looking for a way to become more involved in the association?Are there hot topics you’d like to see included in this year’s AnnualMeeting programming? Then the Annual Meeting planning committeeinvites you to join them. Whether you’ve attended the Meeting for sever-al years or are new to AGC, we’re interested in your thoughts. The com-mittee meets once a month for 90 minutes. Additional meetings may beadded as the event gets closer. You do not need to be located in the TwinCities as participation via conference call is always an option. If youwould like to join the committee or have questions, contact Denise Woodsat [email protected] or 651/796-2186.

AGC of Minnesota – SAVE THE DATES!!! AGC SUMMER EVENTS• Summer Member Meeting – July 9 Kitchi Gammi Club, Duluth.• Golf Tournament – August 2 Fox Hollow Golf Club, St. Michael.• Sporting Clays Fundraiser – August 19 Minnesota Horse & Hunt Club,Prior Lake.

More Information to follow on these upcoming events!

HxGN LIVE – Hexagon’s International Conference, June 3 – 6, 2013,Las Vegas, Nevada, USA!Join Leica Geosystems at the HxGN LIVE Conference – formerly knownas Hexagon 2013! It’s a different name, but the same great conference –and an experience you don’t want to miss. Group registration options andspecial discounts for previous conference alumni, educational institu-tions, law enforcement agencies, and authorized dealers are also avail-able. For more information contact: Angelique Ortega [email protected] +1 925/790-2318. See you in Las Vegas!

RDO EQUIPMENT COMPANY, CUSTOMER APPRECIATION DAY!Please join us WEDNESDAY, JUNE 19th from 10:00 AM to 3:00 PM forour Customer Appreciation Day. It’s the least we can do to say, thank youto our valued customers. Lunch will be served. For more informationcontact T. J. Brewster, Parts Manager at 406/451-2203. FREE LUNCH,10% Parts Discount – Available June 19th Only! Bring Your Parts List! What: Customer Appreciation DayWhen: June 19th, 10:00 AM to 3:00 PMWhere: RDO Equipment Company – Bozeman

257 Laura Louisa Lane

June 19-22, 2013 - Symposium. 16th Annual Snow & Ice Symposium,Minneapolis, MN. For 16 years, the Snow & Ice Symposium has helpedprofessionals join together to discuss all aspects of the work that they do.Join SIMA at the 16th Annual Snow & Ice Symposium as we help educateeach other on the best principles of business management, snow and iceoperations, leadership, and more! For more information on this event,please contact the Snow & Ice Management Association, Milwaukee, WIvia telephone at 414/375-1940 or [email protected].

IOGA, WEST VASixth Annual WEST VA OIL & GAS EQUIPMENT SHOWJuly 10 and 11, 2013 (8:00 AM thru 8:00 PM)West VA Wesleyan College Campus, Buckhannon, WVMountain State Expo (official contractor for IOGA WV Oil & Gas EquipmentShow)

IOGA, WEST VA (INDEPENDENT OIL & GAS ASSOCIATION)2013 Summer MeetingAugust 4, 2013 thru August 6, 2013Location: The Greenbriar, White Sulphur Springs

FRIDAY, JUNE 21, 2013 - EXPO. Northern Tier Marcellus Expo, AlparonPark, Troy, PA. The 2013 Northern Tier Marcellus Shale Business Expo is an opportunityto promote your business in one of the most recognized gas plays in theworld. With major sponsors such as Chesapeake and Talisman Energythis event promises to provide businesses and entrepreneurs with theunique opportunity to network among some of the natural gas industry’smost important contacts and supporting industries. Introduce your busi-ness and technology to the people who are making decisions in thehottest shale play in the country. NOTICE! Registration opens for previousexhibitors TUESDAY, MARCH 12th, 2013. OPEN REGISTRATION beginsTuesday, APRIL 9, 2013. QUICK SIGNUP! Questions??? Call now today!570/297-3648.

PA GAS EXPO 2013 – JUNE 26, 2013 0 PA GAS EXPO 2013KOVALCHICK COMPLEX, INDIANA, PAQuestions? Email Carrie Rayko at [email protected] Broadcasting, PA Gas Expo Coordinator Thank you for attending PA Gas Expo 2012 and we’ll see you again thisyear! ***NOTE: June 25, 2013, GOLF OUTING CHESTNUT RIDGE,BLAIRSVILLE, PA

SEPTEMBER 17 thru 19, 2013 - FARM SCIENCE REVIEW.Farm Science Review@OhioStateFSR. If your business is agricultural, our business is you! Please contact Leslie Risch, Program Assistant at 614/292-4278 formore information on this program.

CONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) GOLF SEASON is JUST AROUND THE CORNER !!! Be sure to mark your calendars for these upcoming CAM GOLF OUTINGS. June 18 – Bay Pointe Golf Club, West Bloomfield, Michigan“First Outing of the Year” - $98 per person. Package includes 18 holes ofgolf with cart; complimentary driving range; box lunch; beverage ticketsfor the course; dinner with open bar; awards and door prizes.July 16 – Links of Novi, Novi“Memorial Classic” - $80 per person. Package includes 18 holes of golfwith cart; grilled lunch at the turn; beer keg on the course; steak dinnerwith cash bar; awards and door prizes.August 13 – Fieldstone Golf Club, Auburn Hills, Michigan“Safety Theme” - $80 per person. Package includes 18 holes of golf withcart; coffee and doughnuts; complimentary range balls; lunch on thecourse; one 6-pack cooler per cart; BBQ dinner with cash bar; awardsand door prizes.September 23 – Plum Hollow Country Club, Southfield, Michigan“Old Timers Classic” - $135 per person. Package includes complimenta-ry driving range; 18 holes of golf with cart; grilled lunch on the course;beverage service on the course; dinner with open bar; awards and doorprizes. For more information, please contact Diana Brown at (248) 972-1000.

2013 MAASTO CONFERENCE: The Wisconsin Department ofTransportation will host the Mid-America Association of StateTransportation Officials (MAASTO) 2013 Conference – “Sharing Strategiesfor Success.” The conference will be held JULY 16-19 at the HILTONHOTEL in downtown Milwaukee. One of the major events at MAASTO2013 will be a trade show, where industry representatives will have theopportunity to showcase materials, technology, and professional servic-es. The trade show will be held July 17 and 18 at the conference hotel.More information on the trade show registration, layout, schedule, andfees will be available in early 2013 at the conference website, which willbe linked via the MAASTO meetings webpage –http://www.maasto.net/meetings.html. If you are looking to speak tosomeone with regard to the above conference you may contact DeniseWoods, CMP, Director, Communications & Events, AGC of Minnesota,directly at 651/796-2186; toll free at 800/552-7670 or website:www.agcmn.org.

AGC – St. Louis***SAVE THE DATE!Beer, Brats & a Band … What more do you need?JUNE 13, 2013 (more details to follow).

August 13, 2013 – Field Day. Nursery Growers of Lake County Ohio,Inc. – Annual Summer Field Day for the Nursery Growers of Lake CountyOhio will be August 13, 2013. This year’s host location is The HoldenArboretum, Kirtland, Ohio. Naturally blending the gorgeous gardens ofthe Arboretum with the Nursery industry is brilliant! Hours will be 9-4 PM!Mark your calendars now so as not to miss it! For more informationplease contact, Annette Howard, NGLCO Executive Director at 440/241-7969.

August 14 – 16, 2013 – Conference. COAG-GEN – Register today andparticipate in the COAL-GEN 2013 Conference and Exhibition in Charlotte,North Carolina. COAL-GEN is the industry’s most dynamic event coveringthe latest topics affecting the design, development, upgrading, operationand maintenance of coal-fueled power plants. This conference is beingheld at the Charlotte Convention Center, 501 S. College Street, Charlotte,North Carolina, USA.

August 16 – 18, 2013 – Convention. Historical Construction EquipmentAssociation – HCEA International Convention and Old EquipmentExposition. The HCEA holds one annual convention and old equipmentexposition each year. Somewhere in either the lower 48 or Canada, mem-bers, local fans, exhibitors, merchandise retailers and, of course, a lot ofworking machines are brought together for learn and share a bit of histo-ry. Next Show: WILMINGTON, ILLINOISHCEA International Convention’s next show is AUGUST 16 thru 18, 2013at the International Union of Operating Engineers’ Local 150 TrainingCenter at 19800 West Arsenal Road, Wilmington, Illinois. For more infor-mation on this event, you may call the HCEA office at 419/352-5616; faxat 419/352-6086 or email: [email protected].

Friday, August 9, 2013 – Golf Outing. Pennsylvania Independent Oil &Gas Association’s (PIOGA’s) 16th Annual Divot Diggers Golf Outing will beheld at the Tam O’Shanter Golf Club, Hermitage, PA on Friday, August 9th.

Tuesday, August 27, 2013 - Wednesday, August 28, 2013 –Conference and Trade Show. Pennsylvania Independent Oil & GasAssociation’s (PIOGA’s) Eastern Oil & Gas Conference and Trade Show isbeing held at the Monroeville Convention Center, Monroeville, PA Formore information on the above PIOGA events, please contact PIOGA’soffice at 724/933-7306 or fax: 724/933-7310.

September 4-6, 2013 – Seminar. RAM, Inc.’s Fall 2013 Blasting andExplosives Safety Training Seminar. The two and one-half day continuouseducation training session will be held at the South Dakota School ofMines in Rapid City, S.D., September 4-6, 2013; presented by Robert A.McClure, Inc. (RAM, Inc.). The final day of the seminar will be capped bya special night blast at the Crazy Horse Memorial on September 6 for allattendees. An early course registration fee of $895/person is availablethru July 31, 2013. Full registration fee is $950 beginning August 1,2013 with a deadline date of August 15. Hotel: Adoba Eco Hotel RapidCity/Mt. Rushmore – special seminar rates available. Course topics havebeen selected to offer value to all professionals with varied experience lev-els, from individuals with decades of experience to those just entering theexplosives industry. To register and for more information, please visit web-site: www.ramets.com. More contact information: Trade Press Contact:Rick Zettler; Phone: 319/265-0052; Fax: 319/265-0053; email:[email protected]. Ram, Inc., Contact: Robert McClure; Phone:740/363-6976; Fax: 740/362-3946; Email: [email protected].

BusinessCalendarRAM Inc. Hosts Blasting,Explosives Training Seminar

RAM Inc.’s fall Blasting and ExplosivesSafety Training (BEST) Seminar, a two-and-a-half day continuous education train-ing session, will be held at the South DakotaSchool of Mines in Rapid City, S.D., Sept. 4to 6, 2013. The final day of the seminar willbe capped by a special night blast at theCrazy Horse Memorial on Sept. 6 for allattendees. RAM Inc.’s enhanced BEST seminar is

designed specifically for those industry pro-fessionals who work with explosives —explosives engineers, drillers, field crews,safety personnel and D&B engineers — andit helps attendees comply with state and fed-eral regulations. Upon completion, eachBEST course attendee will receive a coursecertificate and a manual with valuable infor-mation that can be used in the field. All atten-dees will receive 20 Continuing Education(20 CE) hours. For 40 years, BEST seminars have

advanced safe operating practices for morethan a thousand attendees worldwide whowork with explosives. Taught by instructorswith decades of experience in their respec-tive fields, the BEST course educates atten-

dees on explosives safety and application,hazard recognition, accident prevention, andregulatory and new product updates. Thetraining seminar includes extensive instruc-tion covering: • Comprehensive safety instructions for

commercial explosives and blasting• Updates on electronic blasting systems

and supporting technologies• Regulatory updates by specialists from

the Bureau of Alcohol, Tobacco, Firearmsand Explosives (BATFE), Mine Safety andHealth Administration (MSHA) and U.S.Department of Transportation• Tours of the Crazy Horse Memorial,

Deadwood and Mt. Rushmore Advanced course registration discount is

available through July 31, 2013. Course top-ics have been selected to offer value to allprofessionals with varied experience levels,from individuals with decades of experienceto those just entering the explosives industry. For more information, visit www.ram-

ets.com.(This story also can be found on


RAM’s (BEST) Seminar willbe capped by a special nightblast at the Crazy HorseMemorial on Sept. 6 for allattendees.


Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauctionlive.com

Sales Managers & Auctioneers, Inc.

ALEX

LYON & SON

THURSDAY, JUNE 27 @ 9:00 AM

EARLY HILITES INCLUDE: CONCRETE PLANT (State of theArt): 2006 Erie Strayer Model MG12CP (12 cu yd. Stationary CentralDrum Mix), 6 CRUSHERS: 2002 Lippman 42x 48 (jaw), 2002 Trio12x52 (jaw), JCI Kodiak 400 Cone, JCI 1400RA Cone, Barmac 9600 VSIMill Crusher, Nordberg HP400 Cone, SCREENING EQUIPMENT:Cedar Rapids 7x20 (3 Screen), (2) JCI 620 ( 3 Deck), Kolberg 6x10 (2Deck Buzz Screen), JCI 7x20 (3 Deck), (2) 2006 JCI 6x20 (3 deck),Kolberg Hydr. Portable Model 1130B, Pepi Vari-Vibe III (2 Desk 6x18/ 40 ft. Conveyor, SANDSCREWS: 2005 Trio Twin 54in., VIBRATORY FEEDERS: Kolberg 50x20, HYDRAULIC HAM-MER: BTI 7B75X, MATERIAL & LOG WASHERS: 44in. Screen Log Washer, 2005 Trio SingleCoarse, 2003 Trio 36x18 Coarse, Con-Weld 8x12 Dewatering Screen, Water Recovery System, 6 DUSTCOLLECTORS: (3) Dalamatic Dust/ Jaw (2 without), DCE Unicel Bag House/ Silo/ Screw Conveyor,(2) LMV Collector Bins/ Silo Bag House, 7 RADIAL STACKERS: Kolberg 36x100 Folding w/ SwivelPlate, Kolberg 30x70, 24x120 w/ Belt Scale, Portec 36x70, Thunderbird 30x100 Stacking, 36x100 Hydr.Stacker, 24x120 Stacking Conveyor w/ Belt Scale, 36x105 Stacker w/ Wheels (not radial), 41 CONVEY-ORS: 36x80 Feed Conveyor w/ Magnet, 42x700 Overland Conveyor w/ Belt Tensioner, 42x115 FeedConveyor w/ Belt Scale, Modern Machinery Underscreen Hopper w/ 36x30 Conveyor, 35x25 Conveyor w/Mefcor Belt Scale Model CS2100J, 30x125 Conveyor, Reuter 36x50, Underscreen Hopper w/ 48x25Conveyor, 36x100 Conveyor, 42x20 Conveyor, Underscreen Hopper w/36x25 Conveyor, 36x80 Conveyor,Reiter 30x60 Conveyor, 30x110 Conveyor w/Large Magnet, (4) 30x15 Shuttle Conveyors, 36x32Conveyor, Huntington (2) Underscreen Hopper w/ 48x30 Conveyor, 24x56 Conveyor, Reuter 30x60Conveyor w/ Belt Scale, Huntington Equipment 24x130 Conveyor w/ Magnet, Cedar Rapids 36x20Conveyor, 24x28 Conveyor, 24x45 Conveyor, 24x90 Conveyor, Modern Machinery Underscreen Hopperw/ 48x32 Conveyor, 24x110 Conveyor, 24x28 Conveyor, 30x120 Conveyor, Hopper Under Buzz Screenw/ 30x26 Conveyor, Marco 30x120 Conveyor w/Belt Scale, Aggregate Machinery Inc. 42x80 FeedConveyor, Kolberg 30x25 Conveyor, 30x20 Conveyor, Goodfellow 30x130 Tunnel Conveyor, Kolberg30x60 Conveyor, Kolberg 30x60 Feed Conveyor, 30x40 Conveyor, Pepi Vari-Vine III Portable 2 Deck6x18 Screen w/ 40ft. Conveyor, SCALES: Schenck 36ft. Belt Scale, Shenck 30ft. Belt Scale w/ SpeedSensor, 12x110 Truck Scales w/ Mettler Toledo Read Out and Chute, SURGE BINS & TUNNELS: SurgeBin, SurgeTunnel System 8x8x80, 2 BOTTOM DUMP TRAILERS: (2) Cook 35ft. (t/a), AGGRE-GATE SUPPORT EQUIPMENT: 8x16 Bulkhead, 8.5x24 Bulkhead, 4,000 & 8,000gal. CylindricalWater Tanks, Approx. 30ft. tall Steel Framed Control Tower, Approx. 40ft. tall Steel Box Framed LightTower,8,000 gal. Cylindrical Water Tank, (2) 60hp Elec. Motor w. Water Pump, 25hp Elec. Motor w/ WaterPump, Approx. 80,000 gal. Open Top Round Water Reservoir, (2) Approx. 18,000gal. Cylindrical 9x40Water Tanks, Approx. 12,000gal. Cylindrical 8x34 Water Tanks, 12,000gal. Stand Tank, pprox. (10)500gal. Oil Tanks, Approx. (7) 300gal. Oil Tanks w/. Air Pumps, Approx. (3) 300gal. Oil Tanks, Approx.(3) 800gal. Fuel Tanks, 500gal. Fuel Tank on small trailer, Connex Boxes, Testing Trailers, 8x336 (2)office Concrete Plant Trailer, 8x20 Office Concrete Plant Trailer, 8x20 Travel Trailer Converted intoBathrooms, 1993 Standard Pacific 12x60 Office Trailer, Transformers, 1000 gal. Gas Tank w/ Fuel MasterSystem, 1973 Fruehauf Semi Trailer w/ Control Booth on roof, 1972 Great Dane 40ft. Semi Trailer(Storage), 1972 Utility 45ft. Semi Trailer (storage), Derrick Corporation Jetter/ Screen, 11x10x44 SettlingBins w/ Chain Paddlewheels, 8x16 Office Trailer @ Batch Plant, Semi Van Trailer @ Batch Plant, WebsterWater Boiler @ Agg. Plant, (3) 8,000gal. Cylindrical Water Tanks, 500gal. Fuel Tanks, Fuel Master System@ Location of Removed Fuel Tanks,, (3) Steel Storage Racks, Shop Building #1(50x60 Coverall Tarpedw/ Tubular Steel Frame, Shop Building #2 w/ 40x40 Coverall Tarped w/ Tubular Steel Frame, 2CRAWLER TRACTOR: 2012 Cat D10T (ripper, warranty), Cat D10N (ripper), 4 ROCK TRUCKS:(3) Cat 773B 60 ton, Cat 796B, 9 MOTOR SCRAPERS: Cat 651E, Cat 651E, Cat 651E, (6) Cat 631E, 2MOTOR GRADERS: Cat 163HVHP, Cat 14H, 2 RUBBER TIRED LOADERS: 2008 Cat 980H, Cat966G, 2 TRACTOR LOADER BACKHOES: Cat 420D (4x4), Cat 416D (4x4), TELESCOPICFORKLIFT: IR VR90C, 3 WATER WAGONS: Cat 631E, Cat 613C, Case 621E, WATER TRUCKS.

Address: 12455 S Old Nevada Hwy 95 Boulder City, NV 89005.DIRECTIONS: From Intersection of HWY 93 (Great Basin HWY) and HWY 95: go South on HWY 95

to Silver Line Road. Go West on Silver Line Road to Old HWY 95. Go North on Old HWY 95Approximately .6 mile to Sale Site.

SALE SITE PHONE: (585) 749-0022

THE VERY BEST!COMPLETE LIQUIDATION

AGGREGATE & COMSTRUCTION EQUIPMENT AUCTION

ElDorado Valley(former Cemex

operation) AUCTION

THURSDAY, JUNE 20 @ 9:30 AM

NOTE: This sale consists of late model equipment from severalnational rental fleets plus one Cat rental fleet operation.

HILITES INCLUDE: 6 CRAWLER TRACTORS: 2012 CatD6TXL, 2008 Cat D6TLGP (cab, new u/c), 2007 Cat D6TLGP,2006 Cat D6RLGP-II (cab, winch), 2006 Cat D6RXL (ripper,new bottom, cab), 2005 Cat D6R-II, 9 TRACTOR LOADERBACKHOES: (3) 2007 JD 310J (4x4), (6) 2003 Cat 416D (4x4), VIBRATORY ROLLER:IR SD70D, 3 RUBBER TRACKED SKID STEERS: (3) 2008 JD CT332, 3 SKIDSTEERS: Bobcat S300, Bobcat S220, Bobcat 873, 7 TELESCOPIC FORKLIFTS: (2)2006- (4) 2005 JLG G12-55A, Skytrak 6036, FORKLIFT: 2007 Cat P5000, BOOM LIFT:2006 JLG 800AJ (4x4), AIR COMPRESSOR: 2007 Atlas Copco XAS185JD, GENERA-TOR: 2006 Magnum Pro MMG35, 4 WELDERS: (2) 2007 Lincoln Vantage 300, (2) 2006Miller BB300D, 11 LIGHT PLANTS: (3) 2006-2005 Amida AL4060D4MH, 2008 MagnumPro MLT4060, (6) 2008 Magnum Pro MLT3060, CONCRETE EQUIPMENT: (3) 2008Stone SB1600 Power Buggies, 2006 Terex RB16R Power Buggy, 2006 Multiquip WBH-16AWDF, SWEEPER: 2007 Laymor 8HC, 3 WATER TRUCKS; 2007 Int’l. 4200 (s/a),2000 Sterling 4000gal. (t/a), 2002 Sterling 2500gal. (s/a), 3 TRUCK TRACTORS: (3) 2010Mack CHU613 (t/a), 9 SERVICE TRUCKS: 2008-(5) 2006- 2005-2004-2003 Ford F550, 3DETACHABLE GOOSENECK TRAILERS: (3) 2013 Witzco RG50 50 ton (tri.), 9 VAC-UUM TRANSPORT TRAILERS: (5) 2008 Troxell alum. 150 barrel (t/a), 2006 Troxell 130barrel Steel (t/a), 2005 Troxell 130 barrel (t/a), 2005 Gaylean 130 barrel (t/a), 2005 Dragon130 barrel (t/a), 14 UTILITY VEHICLES: (4) 2011 Kawasaki Mule, (3) 2009-(6) 2008Club Car XRT1550G, 2009 JD XUV850D, SUPPORT EQUIPMENT: New Mustang LF82Plate Compactor , (4) New Mustang LF88 Plate Compactors, New Mustang ML80SRammers, New Mustang M30 Core Drill, New Mustang MP3 3in. Water Pump, (3) NewMustang MP4800 2in. Submersible Pumps, (3) New Mustang CV3500 Concrete Vibrators,(12) New 3pc. 14in. Diamond Blades, (6) New 6 packs of 14in. Abrasive Blades, (6) New 4packs of 10,000lb. Ratchet Cargo Straps, New 5 Ton Digital 4ft. x 4ft. Platform Scales, NewHuskie 11218 SDS Hammer Drills, (4) New 1in. Drive Air Impact Wrenches, (4) New 1/2in.Drive Air Spray Gun Kits, (6) New 2in. x 50ft. Discharge Water Hoses, (4) New Stiff NeckPintle Hitches, Airless Paint Sprayers, Chipping Hammers, Brush Mowers, Impact Wrenches,Core Drills, Floor Grinders, Levels, Generators, Qty. Honda – Multiquip – Versamat- Zoeller2in.- 4in. Pumps, IR & Wacker Generators, Master & Tradesman Heaters, Qty. MI-TMPressure Washers, Multiquip Plate Compactors, Hydrostat Pumps, Pipe Threaders, HandSaws, Texas Air Movers, TPW Test Pumps, Wacker Rammers & Plate Compactors.

Address: 7200 North County Road West Odessa, TX 79764.DIRECTIONS: From Odessa-Schleymeyer Field: NW on E Centergate St, take first right –stay on E Centergate St. .2 mile, left on US-385 S/ Andrews Hwy. .6 mile. Take 2nd rightonto W Yukon Rd. 1 mil, right onto N County Rd. W/ Farm-to-Market Rd 1882. Site will beon right. From Midland Airport: I-20E BUS .4 mile, take ramp on left onto I-20 BUS W 6.4miles, turn right toward TX-338 Loop N and take ramp onto TX-338 Loop N. 4.4 miles. Turnleft onto E Yukon Rd. 3.9 miles, turn right onto N County Rd W/ Farm-to-Farm Market Rd1882 .4 mile. Site on right.


LATE MODEL CONSTRUCTION RENTAL FLEETEQUIPMENT, EARTHMOVING EQUIPMENT,

AERIALS, FORKLIFTS, WELDERS, TRUCKS, VACUUMTRAILERS, ATTACHMENTS & SUPPORT EQUIPMENT

AUCTIONHertz EquipmentRentals

United/RSC Rentals

ODESSA,TEXAS

LAS VEGAS(Boulder City),

NEVADA


Case SiteWatch ProvidesCustomers Real-Time DataCase Construction Equipment launched

Case SiteWatch, its telematics, remote moni-toring and data reporting solution that pro-vides customers with actionable informationto help manage their fleets and optimizemachine performance.Using a control module that integrates

with the machine, SiteWatch sends real-timedata to a user Web portal accessible fromnearly anywhere in the world. An intuitiveinterface allows customers and dealers toreview and analyze up to 18 monthsworth of information. SiteWatchexperts at each Case dealership areon hand to consult with customersand provide tailored assistance,from setup to detailed data analysis.“We developed SiteWatch to

empower our customers, especiallysmall- to mid-size operations thatmay not be as familiar with the tech-nology,” said Jim Hasler, vice presi-dent, Case Construction-NorthAmerica.For example, currently Case is

the only OEM with a dedicatedtelematics customer call center.“Knowledge is power,” said

Hasler. “SiteWatch provides criticaldata that our customers and theirdealers can analyze to maximizemachine utilization. SiteWatchempowers our customers to increaseproductivity, efficiency, and ulti-mately, profitability.”SiteWatch proactively keeps

users and their dealers informedwith performance metrics, idle-timeanalytics, scheduled maintenanceintervals, machine health reportingand programmable security alerts. This infor-mation allows customers and dealers to iden-tify machine performance trends, operatorefficiencies and training requirements.“We look at SiteWatch as an essential busi-

ness tool for today’s operations,” said BradStemper, solutions marketing manager, CaseConstruction. “SiteWatch comes pre-pro-grammed to monitor up to 12 parameters,many of which are customizable, so the out-put can be as simple or comprehensive as ourcustomers need, and this information allowsthem to make immediate decisions toimprove costs, lower fuel consumption andcomplete scheduled maintenance. SiteWatchalso can tell customers which machines areready for deployment, allowing them to max-imize productivity and fleet utilization.”According to Stemper, another key busi-

ness purpose for SiteWatch is accurate, fastjob costing. Rather than spending time call-ing operators to get machine hours,

SiteWatch keeps track of machine usage andrun-time on a daily or monthly basis.Customers can quickly pull up a detailed,precise picture of their fleets’ capabilities, andpotentially offset rental cost.SiteWatch also can help conserve fuel and

battery life through various power manage-ment settings including hibernate, sleep andstandby modes. It can protect a customer’sfleet in a number of ways including curfew,geofencing and motion detection even when

the machine is turned off. If a machine doesleave the premises, SiteWatch aids in track-ing and recovery, helping to significantlyreduce theft-related costs.Customers can choose between a basic

and advanced SiteWatch subscription,depending on how much information isneeded and how often.SiteWatch currently is standard equipment

on the F Series wheel loaders, and includes astandard three-year advanced subscriptionplan. Case will continue to roll out SiteWatchas standard equipment on select heavymachines throughout 2013. It’s also availableas a factory option on select machines or as adealer-installed accessory on virtually anyself-powered piece of equipment.For more information, visit

www.CaseCE.com/SiteWatch.(This story also can be found on


Using a control module that integrates with themachine, SiteWatch sends real-time data to auser Web portal accessible from nearly any-where in the world.

The president offered moral and mone-tary support in the wake of the monstroustornado that killed 24 people, including 10children.Standing with Oklahoma Gov. Mary

Fallin and other state and federal officials,Obama recognized the substantial rebuild-ing job ahead and said “our hearts go out toyou.”The White House said the Federal

Emergency Management Agency hasalready provided $57 million in rebates andincentives to help build about 12,000 stormshelters in Oklahoma. “These storm shelters can be the differ-

ence between life and death,” PresidentialSpokesman Josh Earnest said to reportersaccompanying Obama to Oklahoma on AirForce One. Once on the ground in Oklahoma, Obama

urged the American people to make contri-butions, saying the damage was “pretty hardto comprehend.” Obama said the tornado

destroyed some 1,200 homes and damagedthousands more. Shortly after his arrival on a partly cloudy

day, Obama rode past grassy fields strewnwith scattered debris, witnessing devastationso awesome that it appeared as if garbagehad literally rained from the sky. His firststop was the demolished site of the PlazaTowers Elementary School, where sevenstudents were killed when the tornadoturned the one-story building into a heap ofbricks, broken concrete and twisted metal. “I know this is tough,” he told superin-

tendent Susie Pierce as he gripped her hand.As he walked, the demolished school was onhis left and on his right, homes as far as theeye could see were reduced to piles of rub-ble. Vehicles were turned upside down andtoys like a pink doll carriage and children'sbooks were strewn with furniture and rippedout wall insulation. Every tree had beenstripped of its leaves and bark.


FEMA, White House Offer$57M for Storm Shelters

TORNADO from page 1

In Canada, the equipment rental industryis forecast to generate nearly $4.6 billion inrevenue in 2013, a 3.1 percent increase. Intotal for North America, equipment rentalrevenues in 2013 are expected to reach$38.2 billion.By the end of the current five-

year forecast in 2017, NorthAmerican equipment rental rev-enue is expected to surpass $50 bil-lion to reach $51.6 billion, withU.S. rental revenue at $46.3 billionand rental revenue in Canada at$5.3 billion.“The industry continues to build

customer demand, which drives thegrowth of the equipment rentalindustry. Listening to ARA mem-bers from around the country andlooking at the forecast of IHS GlobalInsight, there is unlimited potential for theequipment rental industry,” said ChristineWehrman, ARA’s executive vice presidentand CEO.“Rental has grown during the anemic eco-

nomic recovery through increased penetra-tion. As industrial and construction marketscontinue to improve, rental will see furthergrowth from a larger share of the equipmentmarket, leading to double-digit revenue

gains by 2014,” said Scott Hazelton, a sen-ior partner with IHS Global insight, whichcompiles data and analyses for the ARARental Market Monitor.The ARA Rental Market Monitor is a

subscription-based service for AmericanRental Association (ARA) members provid-

ed by ARA and Rental Management as partof a partnership with ISH Global Insight,one of the world’s most respected economicforecasting firms based in Lexington, Mass.For more information, visit

www.ARArental.org. (This story also can be found on


Growth Reflects RecoveryREVENUE from page 1

“The industry continues to buildcustomer demand, which drivesthe growth of the equipmentrental industry.”

Christine WehrmanAmerican Rental Association


Thursday, June 27

Complete Liquidation

Visit www.ironplanet.com to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.

www.ironplanet.com 855-685-5491Inspected and Guaranteed

California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

Featuring equipment from in TN

(3) P&H LATTICE BOOM TRUCK CRANES MODEL 325, 430ATC & 435TC (2) BUCYRUS-ERIE 60T LATTICE BOOM TRUCK CRANE

BIDWELL SCREED

LINK-BELT HC-138 LATTICE BOOM TRUCK CRANE

BUCYRUS-ERIE 30B SUPER IV

LINK-BELT LS-408 CRAWLER CRANE

GROVE RT528 ROUGH TERRAIN CRANE

MACK R688ST TRI-AXLE ROAD TRACTOR

LINK BELT LS338 CRAWLER CRANE

ROGERS T3HPG50 50 TON LOWBOY TRAILER


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ALEX LYON & SONS INC

HOUSTON TX / DEER PARK TX.................................49

ODESSA TX / LAS VEGAS NV....................................51

ALLU GROUP .......................................................................14

BARGAINS ............................................................................44

BLANCHARD MACHINERY ...................................................9

CEG SCALE MODELS............................................................7

CLASSIFIEDS .......................................................................44

CONSTRUCTION EQUIPMENT COMPANY .......................40

CONSTRUCTION EQUIPMENT GUIDE

WANTED .......................................................................46

AUCTION RESULTS.....................................................48

TESTIMONIAL...............................................................22

AIR COMP PROMO......................................................45

VALUE ADDED..............................................................42

DARR EQUIPMENT CO .........................................................9

DITCH WITCH WEST ......................................................30,31

DOMINION EQUIPMENT PARTS.........................................14

DOOSAN INFRACORE AMERICA CORP ...........................20

DOOSAN PORTABLE POWER............................................17

DYNAPAC..............................................................................24

EXODUS...........................................................................36,37

FELLING TRAILERS.............................................................26

FINN.......................................................................................35

FLANGE LOCK .......................................................................2

FLECO ATTACHMENTS.......................................................14

FLUID CONTROL SERVICES ................................................6

GRINDERCRUSHERSCREEN.COM...................................36

GROVE CRANE....................................................................16

HELAC CORPORATION.......................................................15

HENDRIX MACHINERY LLC..................................................3

HYDRAULICIRCUIT TECHNOLOGY...................................15

INDEXATOR ..........................................................................13

IROCK CRUSHERS..............................................................43

IRON PLANET.......................................................................53

KAWASAKI CONSTRUCTION MACHINERY ......................23

KIRBY SMITH MACHINERY.................................................56

KOMATSU AMERICA CORP...........................................18,19

KPI-JCI...................................................................................43

LANDOLL CORP...................................................................27

LBX ..................................................................................28,29

METSO MINERAL SCREENING..........................................35

METSO MINERALS ..............................................................41

MIDCO DEMOLITION TOOL CO..........................................38

MOBILE TRACK SOLUTIONS................................................2

NORAM..................................................................................21

RANSOME EQUIPMENT SALES LLC.................................46

RECS .....................................................................................15

RITCHIE BROS AUCTIONEERS..........................................55

ROAD BUILDERS MACHINERY.........................................5,6

ROAD MACHINERY CO.........................................................2

SENNEBOGEN .....................................................................39

SUPERIOR INDUSTRIES.....................................................38

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


Unreserved public auctions

28,5Unreserved public auctions

items in North America

rbauction.com | 1.800.211.3983

Featured upcoming auctionsSacramento, CA Jun 4Los Angeles, CA Jun 6Sylmar, CA Jun 7Salt Lake City, UT Jun 11Tipton, CA Jun 13Denver, CO Jun 14Phoenix, AZ Jun 18Bozeman, MT Jun 21El Paso, TX Jun 25

Bid with confidence▸ No minimum bids or reserve prices▸ Up to 100% financing available▸ Inspect and bid in person or online

Sell your equipmentCall today–any number of items accepted.

More items added dailyVisit rbauction.com to see all auctions and up-to-date listings.

Featured items in North America500+ Excavators230+ Crawler tractors340+ Wheel loaders75+ Motor graders300+ Loader backhoes230+ Skid steer loaders80+ Articulated dump trucks70+ Motor scrapers280+ Dump trucks110+ Mini excavators and much more...

2008 TESMEC TRS985SYLMAR, CA – JUN 7

CEC 400 SERIES CLOSED CIRCUITBOZEMAN, MT – JUN 21

2008 KOBELCO CK250II 250 TON & 2008 AMERICAN/TEREX HC230 230 TON – SACRAMENTO, CA – JUN 4

2– 2012 & 2006 DOOSAN DX300 LCLOS ANGELES, CA – JUN 6

2011 KOMATSU WA250PZ-6 EL PASO, TX – JUN 25

2011 KOMATSU PC350LC-8SALT LAKE CITY, UT – JUN 11

3– 2003 KOMATSU WA500-3 AVANCEDENVER, CO – JUN 14

2– 2012 DOOSAN DL250LOS ANGELES, CA – JUN 6

1999 CATERPILLAR 140HTIPTON, CA – JUN 13


West 11 2013

Documents

collapsed bridge

themangled bridge

equipmentrental market

bridgesee bridge page

revenue page

oklahomasee tornado

tornado debris

thatthe temporary spans