Vlsiphysicaldesignautomationonpartitioning 120219012744-phpapp01

VLSI Physical Design AutomationIntroduction , partitioning

Hemant kumarRoll No: 2910207Cont no. 09992440824Dept. of Electronics & Communication Engg.,KITM, KURUKSHETRA.

• VLSI CAD (also known as EDA – electronic design automation) students, in particular for chip implementation (physical design)

• Circuit designers to understand how tools work behind the scene

• Process engineers to tune process that is more circuit/physical design friendly

• Mathematical/Computer Science majors who want to find tough problems to solve– Lots of VLSI physical design problems can be

formulated into combinatorial optimization or mathematical programming problems.

– Actually, most CAD problems are NP-complete -> heuristics

Intended Audience

Objective of this LectureTo review the materials used in fabrication of VLSI

devices.To review the structure of devices and process

involved in fabricating different types of VLSI circuits.

To review the basic algorithm concepts. Understand the process of VLSI layout design. Study the basic algorithms used in layout design

of VLSI circuits. Learn about the physical design automation

techniques used in the best-known academic and commercial layout systems.

Physical Design• Converts a circuit description into a geometricdescription.– This description is used for fabrication of the chip.• Basic steps in the physical design cycle:1. Partitioning2. Floorplanning 3. placement4. Routing5. Compaction

6

System Level Partitioning

Board Level Partitioning

Chip Level Partitioning

System

PCBs

Chips

Subcircuits/ Blocks

So, what is Partitioning?

7

Why partition ?• Ask Lord Curzon

– The most effective way to solve problems of high complexity : Parallel CAD Development

• System-level partitioning for multi-chip designs– Inter-chip interconnection delay dominates

system performance• IO Pin Limitation • In deep-submicron designs, partitioning

defines local and global interconnect, and has significant impact on circuit performance

Importance of Circuit PartitioningDivide-and-conquer methodologyThe most effective way to solve problems of high complexity

E.g.: min-cut based placement, partitioning-based test generation,…

System-level partitioning for multi-chip designs inter-chip interconnection delay dominates system performance.

Circuit emulation/parallel simulation partition large circuit into multiple FPGAs (e.g.

Quickturn), or multiple special-purpose processors (e.g. Zycad).

Parallel CAD developmentTask decomposition and load balancing

In deep-submicron designs, partitioning defines local and global interconnect, and has significant impact on circuit performance

…… ……

9

Objectives

• Since each partition can correspond to a chip, interesting objectives are:– Minimum number of partitions

• Subject to maximum size (area) of each partition

– Minimum number of interconnections between partitions• Since they correspond to off-chip wiring with

more delay and less reliability• Less pin count on ICs (larger IO pins, much

higher packaging cost)– Balanced partitioning given bound for area of

each partition

Partitioning:Partitioning is the task of dividing a circuit into smaller parts . The objective is to partition the circuit into parts, so that the size of each component is within prescribed ranges and the number of connections between the components is minimized . Different ways to partition correspond to different circuit implementations . Therefore, a good partitioning can significantly improve circuit performance and reduce layout costs .• Decomposition of a complex system into smaller

subsystems– Done hierarchically– Partitioning done until each subsystem has

manageable size– Each subsystem can be designed independently

• Interconnections between partitions minimized– Less hassle interfacing the subsystems– Communication between subsystems usually

costly

Partitioning of a Circuit

Input size: 48

Cut 1=4Size 1=15

Cut 2=4Size 2=16 Size 3=17

Hierarcahical Partitioning

• Levels of partitioning:– System-level partitioning:

Each sub-system can be designed as a single PCB

– Board-level partitioning:Circuit assigned to a PCB is partitioned into sub-circuitseach fabricated as a VLSI chip

– Chip-level partitioning:Circuit assigned to the chip is divided into manageable sub-circuitsNOTE: physically not necessary

13

Delay at Different Levels of Partitions

AB

C

PCB1

D

x

10x

20x

PCB2

14

Partitioning: Formal Definition• Input:

– Graph or hypergraph– Usually with vertex weights– Usually weighted edges

• Constraints– Number of partitions (K-way partitioning)– Maximum capacity of each partition

ORmaximum allowable difference between partitions

• Objective– Assign nodes to partitions subject to constraints

s.t. the cutsize is minimized• Tractability-Is NP-complete

Circuit Representation

• Netlist:– Gates: A, B, C, D– Nets: {A,B,C}, {B,D}, {C,D}

• Hypergraph:– Vertices: A, B, C, D– Hyperedges: {A,B,C}, {B,D}, {C,D}

– Vertex label: Gate size/area– Hyperedge label:

Importance of net (weight)

AB

C D

A

B

C D

16

Circuit Partitioning: Formulation

Bi-partitioning formulation: Minimize interconnections between partitions

•Minimum cut: min c(x, x’)

•minimum bisection: min c(x, x’) with |x|= |x’|

•minimum ratio-cut: min c(x, x’) / |x||x’|

X X’

c(X,X’)

17

A Bi-Partitioning Example

Min-cut size=13Min-Bisection size = 300Min-ratio-cut size= 19

a

b

c e

d f

mini-ratio-cut min-bisection

min-cut 9

10

100

100 100100100

100

4

Ratio-cut helps to identify natural clusters

18

Iterative Partitioning Algorithms

• Greedy iterative improvement method (Deterministic)– [Kernighan-Lin 1970]

• Simulated Annealing (Non-Deterministic)

19

Restricted Partition Problem

• Restrictions:– For Bisectioning of circuit– Assume all gates are of the same size– Works only for 2-terminal nets

• If all nets are 2-terminal, hypergraph graph

a

b

c dHypergraph Representation

Graph Representation

ab

c d

20

Problem Formulation

• Input: A graph with – Set vertices V (|V| = 2n)– Set of edges E (|E| = m) – Cost cAB for each edge {A, B} in E

• Output: 2 partitions X & Y such that– Total cost of edge cuts is minimized– Each partition has n vertices

• This problem is NP-Complete!!!!!

21

A Trivial Approach

• Try all possible bisections and find the best one• If there are 2n vertices,

# of possibilities = (2n)! / n!2 = nO(n)

• For 4 vertices (a,b,c,d), 3 possibilities1. X={a,b} & Y={c,d}2. X={a,c} & Y={b,d}3. X={a,d} & Y={b,c}

• For 100 vertices, 5x1028 possibilities• Need 1.59x1013 years if one can try 100M

possbilities per second

Definitions

• Definition 1: Consider any node a in block X. The contribution of node a to the cutset is called the external cost of a and is denoted as Ea, where Ea =Σcav (for all v in Y)

• Definition 2: The internal cost Ia of node a in X is defined as follows: Ia =Σcav (for all v in X)

Example

• External cost (connection) Ea = 2• Internal cost Ia = 1

a

b

c

d

X Y

Idea of KL Algorithm

• Da = Decrease in cut value if moving a = Ea-Ia– Moving node a from block X to block Y would

decrease the value of the cutset by Ea and increase it by Ia

a

bc

d

X Y

a

b

c

d

X Y

Da = 2-1 = 1Db = 1-1 = 0

Idea of KL Algorithm

• Note that we want to balance two partitions• If switch A & B, gain(A,B) = DA+DB-2cAB

– cAB : edge cost for AB

A

B

C

D

X Y

A

B

CD

X Y

gain(A,B) = 1+0-2 = -1

• Start with any initial legal partitions X and Y• A pass (exchanging each vertex exactly once) is

described below:1. For i := 1 to n do From the unlocked (unexchanged) vertices, choose a pair (A,B) s.t. gain(A,B) is largest Exchange A and B. Lock A and B. Let gi = gain(A,B)2. Find the k s.t. G=g1+...+gk is maximized3. Switch the first k pairs

• Repeat the pass until there is no improvement (G=0)

Idea of KL Algorithm

Example

1

X

2

3

4

5

6

Y

Original Cut Value = 9

4

X

2

3

1

5

6

Y

Optimal Cut Value = 5

A good step-by-step example in SY book

Time Complexity of KL

• For each pass,– O(n2) time to find the best pair to exchange.– n pairs exchanged.– Total time is O(n3) per pass.

• Better implementation can get O(n2log n) time per pass.

• Number of passes is usually small.

Recap of Kernighan-Lin’s AlgorithmPair-wise exchange of nodes to reduce

cut sizeAllow cut size to increase temporarily within a pass Compute the gain of a swapRepeat Perform a feasible swap of max

gainMark swapped nodes “locked”;Update swap gains;

Until no feasible swap; Find max prefix partial sum in gain sequence g1, g2, …, gm

Make corresponding swaps permanent.

Start another pass if current pass reduces the cut size (usually converge after a few passes)

u v a

v u

locked

Other Partitioning Methods

• KL and FM have each held up very well

• Min-cut / max-flow algorithms–Ford-Fulkerson – for unconstrained

partitions• Ratio cut• Genetic algorithm• Simulated annealing

References and Copyright

Textbooks referred (none required)[Mic94] G. De Micheli

“Synthesis and Optimization of Digital Circuits”McGraw-Hill, 1994.

[CLR90] T. H. Cormen, C. E. Leiserson, R. L. Rivest“Introduction to Algorithms”MIT Press, 1990.

[Sar96] M. Sarrafzadeh, C. K. Wong“An Introduction to VLSI Physical Design”McGraw-Hill, 1996.

[She99] N. Sherwani“Algorithms For VLSI Physical Design Automation”Kluwer Academic Publishers, 3rd edition, 1999.

THANK YOU