"URALVAGONZAVOD" — INNOVATIVE INDUSTRIAL EQUIPMENT FOR INFRASTRUCTURE

OJSC «Research and Production Corporation«URALVAGONZAVOD»

INNOVATIVE INDUSTRIAL EQUIPMENT FOR INFRASTRUCTURE

RESEARCH AND PRODUCTION CORPORATION «URALVAGONZAVOD»

The mission of the Division of Road-Building and Agricultural Vehicles is: - To become a major company producing, selling and maintaining vehicles in primary world markets- Grounding on the national production knowledge and international cooperation, to meet the requirements of customers in the widest possible range of reliable construction, commercial and municipal vehicles attended throughout the lifecycle

Uralvagonzavod was put in into service in 1936 as the plant producing freight wagons. During World War II the plant started building tanks and some other military products. In 1990s to convert the military production, the plant organized manufacture of wheeled tractors, tracked and wheeled excavators, and skid steer loaders.

Research and Production Corporation “URALVAGONZAVOD” is the largest machine-building complex incorporating 22 enterprises, research institutes, and design offices of Russia and Europe.

In three years the investments into the Division development will make 18 to 20 billion rubles, of them 13 to 15 billion will be invested into the Chelyabinsk Tractor Plant. The upgradation of the Chelyabinsk facilities will not be a targeted, but comprehensive one covering the processing chains of both engines and vehicles. This activity will result in increasing the volume of the Division sales up to 30-40 billion rubles.

The Division challenges the following: - Considerable increase in product export- Large-scale re-equipment and modernizationApart from the modernization, much attention is paid to the improvement of working conditions and production standards. Rationalization activity is boosted as well. The core of the Division is the Chelyabinsk Tractor Plant. It was designed for mass production of turnaround crawler tractors (including engines) and was put into service in 1933. The years 1940 to 1988 saw the tank production as well.

In 1957, the tank was taken as a base for designing heavy-duty tractor ДЭТ-250. The tractor with some engineering changes is produced up to this day. The plant production capacity was 30 thousand vehicles a year. In early 1990s, only two models were manufactured at a time: medium tractor T-170 (earlier T-130) and heavy-duty tractor ДЭТ-250М. Medium tractors were supplied to numerous mechanical plants, where they were equipped with implements and further sold to end-users.

To widen the range of the ChTZ products and involve the Division dealer network in selling them, the excavator and skid steer loader production facilities are scheduled for shifting to the Chelyabinsk Tractor Plant.


CONTENT

DIVISION OF ROAD-BUILDING AND AGRICULTURAL VEHICLES RESEARCH AND PRODUCTION CORPORATION «URALVAGONZAVOD»

CONTENT 04

24

28

34

50

ROAD-BUILDINGAND AGRICULTURAL VEHICLES

MUNICIPAL RAIL TRANSPORT

ENGINES

GROUND TRANSPORT ROVERS

DRILLING VEHICLES AND ACCESSORIES


ROAD-BUILDING AND AGRICULTURALVEHICLES

01

RIPPER-DOZER

The T10M tractor-based dozer is designed to carry out a wide range of operations in construction, land improvement, metal mining, oil and gas industries, and in other manufacturing sectors, to excavate soils of categories I-IV, frozen and rocky soils included. The T10MБ tractor-based dozer has reduced ground pressure.The T10M2 tractor-based dozer features hydromechanical transmission, planetary final drive, and offset swing axis of track frames.The T10M tractor-based family of dozers provides the optimum choice of configurations depending on the operating conditions and nature of works:

• Mechanical transmission features higher performance factor and repairability.• Hydromechanical transmission provides high efficiency and user friendliness. • Planetary final drive and offset swing axis of track frames extend the service life of the power train for

operation with higher efficiency on heavy soils. • Swamp modification is designed to operate on low-load-bearing capacity soils.• Dozer implements: bulldozing kit, ripper, recovery winch, etc.

DOZER 05

БI0М


RIPPER-DOZER

Dozer Б11 is designed to carry out a wide range of operations in construction, land improvement, metal mining, oil and gas industries, and in other manufacturing sectors, to excavate soils of categories I-III without preparatory ripping and soils of category IV with preparatory ripping. Dozer Б11 combines the most advanced and effective features of the Б10М dozer with the latest engineering solutions:

• Hydromechanical transmission with modular planetary final drive and offset swing axis of track frames to extend the power train life, to provide high efficiency, and to make the dozer user friendly

• The dozer carries frame hexagon cab with twindow insulating units to provide better noise, heat and vibration insulation to make the operator comfortable at his station.

• For convenience in maintenance, the ROPS-FOPS cab is tilted backward by the hydraulic ram.• The dozer has an ingenious design with the use of high-impact plastic of the cab and hood.

06 DOZERБII

RIPPER-DOZER

Dozer Б14 is designed to carry out a wide range of operations in construction, land improvement, metal mining, oil and gas industries, and in other manufacturing sectors, to excavate soils of categories I-III without preparatory ripping and soils of category IV with preparatory ripping. Dozer Б14 is heavier and more powerful than dozer Б10M. It implements the latest design and engineering solutions to improve operability and maintainability. The engine with increased power, hydromechanical transmission with modular planetary final drive and offset swing axis, frames with 7 road wheels and wide track shoes, bigger dozer blade provide high efficiency of operation on heavy soils.The dozer carries frame hexagon cab with integrated ROPS-FOPS protection with twindow insulating units to provide better noise, heat and vibration insulation. For convenience in maintenance, the cab is tilted backward by the hydraulic ram to make the operator comfortable at his station. Dozer Б14 has an ingenious design and is made with the use of high-impact plastic of the cab and hood.

07DOZERБI4


RIPPER-DOZER

• Industrial tractor of drawbar category 6 with hydrostatic transmission• Purpose: To excavate soils of categories I-II, to be used in construction, land improvement and other

manufacturing sectors• The first small-size industrial dozer of the Russian make• The dozer has unique equipment with the hydraulic circuit to lift the blade and to turn it in two planes

(to provide tilt and lateral turn).• Automatic stepless hydrostatic transmission ensures high manoeuvrability of the dozer with the

possibility of pivot turn when tracks run in opposite directions.• Automatic transmission, active universal dozer equipment and ease of steering create new

technological capabilities of the dozer.

08 DOZERБ8

ДЭТDIZEL-ELECTRIC DOZER WITH AC ELECTRIC MACHINES

Industrial tractor of drawbar category 25 with electromechanical transmission is designed to carry out a wide range of operations in construction, metal mining, oil-and-gas and coal industries, and in other manufacturing sectors, to excavate soils of categories I-IV, frozen and rocky soils included. It is the first tractor in the world with valve-inductor AC electric machines in the transmission. Electromechanical transmission automatically maintains rating of the engine, provides high production and performance, and saves fuel. The dozer operates reliably at high humidity. The resilient torsion-bar suspension of all road wheels enables to take advantage of full tractor tractive force and to use higher speeds thus, increasing the dozer efficiency.

09DOZER400


TO CARRY OUT WIDE RANGE OF LOADING OPERATIONS

The loaders are designed with regard to all advanced requirements, are fitted with unique equipment, feature modern design and carry comfortable ROPS-FOPS cab. The family of front-end wheel loaders provide the optimum choice of configurations depending on the operating conditions and nature of works: from municipal engineering operations to excavation. The loader reliability is supported by the use of the latest-generation components from the best world manufacturers. The loaders feature hydromechanical transmission with manual and automatic gear shifting on load, electronic control and diagnostic systems of the German make, hydraulic units from Denmark and Italy. The loader mounts a ROPS-FOPS cab with all-round visibility and better noise, heat and vibration insulation, ease of steering to make the operator comfortable at his station.High efficiency and performance are provided by deep dipper with automatic recovery to rack back after dumping, high operation rates, and fast cycle.

10 WHEELFRONT-END LOADERSПК30/46/65

ТРTO TRANSPORT AND LAY PIPELINES

Pipelayer cranes are designed to transport and lay pipelines up to 720 mm and up to 1020 mm across in trenches, to support cleanout and coating machines, to carry out various materials handling on usual and low-load-bearing capacity soils. The pipelayer cranes are equipped with safety devices meeting the current standard requirements. The pipelayer cranes are made on the base of a special tractor modification. Wider gauge and longer ground contacting area of tracks with wide track shoes provide less specific ground pressure and higher stability of crane during lifting operations. Thanks to change in the power train design of the base tractor, the first speed is reduced.To make pipe laying more accurate and to reduce dynamical loads in the pipelayer mechanical drive, the minimum loaded luffing speed was reduced and the unloaded luffing speed was increased. The use of hydrostatic drive provides smooth and stepless hook and crane speeds within the whole range.

11PIPELAYERCRANESI2/20


TO CARRY OUT WIDE RANGE OF HANDLING OPERATIONS

Purpose: • To mechanize handling operations with soils of categories I-IV, loose materials and small-sized lump

cargoes in spacious and enclosed areas• To carry out handling-and-stockpiling operations with piece goods• To perform special-purpose operations (well drilling, clearing roads and pavements from mud and snow, etc.).

Operation: • In areas with temperate climate within the temperature range from minus 30ºC to plus 40ºC

SKID STEER MINILOADERПмК6.02

Max overall dimensions with dipper in transport position, mmLengthWidthHeight (without flasher)

340016002160

Max weight with dipper, kg 2760

Max load when operating with dipper, kg 600

Max dump height, mm 2150

Miniloader speed forward and backward, km/h Up to 11

Min turning radius at dipper lip in transport position, mm 2000

12

Hydraulic earth auger Pumping unitExcavating equipment

Welding unit Compressor unit Concrete mixer

Rotor snow thrower Fork Grapple fork

Snow plow Sweeper with collector Sweeper

13

Other options: two-axle trailer, winch, hook, and track

Miniloader ПкМ-6.02 is completed with a wide range of implements specially designed for this type of vehicles. Miniloaders equipped with implements represented below are able to carry out various operations and put their multitask capability into life.

Dipper without teeth Dipper with teeth Dipper with teeth


14

Purpose:• To crop and harvest vegetables and high-caulescent row crops with 45-, 70-,75- and 90-cm row-

spacing using domestic and foreign wide-cut, single- and multi-operational aggregates mounted on the tractor front and rear, with containers for seeds, fertilizers and herbicides

• To till different types of soils to the depth of 30 cm by mounted ploughs, including one-way ploughs• To carry out full cultivation, sowing and harvesting grain and other crops • To transport cargoes• To carry out general farm operations

MULTIPURPOSEWHEEL TRACTOR РТ-М160У

Drawbar category 2

Rated tractive force, kN (kgf) 18.0(1835) - 27.0(2750)

No. of gears Forward Reverse

168

Max speed at engine operating speed and absence of skidding, km/h:Forward: Operating speed Traveling speedReverse

163512

Service weight with implements, kg 6535

Min turning radius at 1800-mm tread without partial braking, m 6.5

Overall dimensions, mm:- Width at 1800-mm tread- Length with front and rear hangers in transport

position- Length without front hanger- Height

23505750

50703060

Engine ЯМЗ-236Д-2

Engine rated power, kW (hp) 129 (175)

15

Purpose:• To carry out handling operations• To transport bulk materials• To transfer cargoes at small distances• To dig soils of categories I and II• To level sites, to fill trenches and holes, to clean square and street ways

WHEEL TRACTOR WITH FRONT-END LOADER РТ-М160У

Min dump height at 45º, mm 2700

Max digging depth with horizontal bucket, mm 70

Min dump height into carrier vehicle, mm 3470

Max bucket lift, mm 4500

Bucket width, mm 2500

Bucket capacity, m3 1.0

Rated loader capacity, kg 2000

Service weight, kg 9000±250

Max speed with loader, km/h 5

Overall dimensions, mmLengthWidthHeight

6750±5025003060±50


Purpose:• To make fire lines in forests• To deliver water for filling individual knapsack fire extinguishers• To remove groundwood from the area of forestry vehicle operation• To deliver engine-driven pump and other fire-fighting equipment to the site of forest fire

Optional purpose:• To carry out forestry activities, i.e. to make furrows to plant trees on openings with drained soils and

tree stubs up to 600 pc per 1 ha• To carry out transportation with trailers and semi-trailers

WHEEL TRACTORWITH OPTIONALFOREST FIRE-FIGHTING EQUIPMENT

РТ-М160

Characteristics of tractor РТ-М-160У with optional equipment for forestry activities

Rated engine power, kW (hp) 129 (175)

Max speed at engine operating speed and absence of skidding, km/h:- Forward- Reverse

3512

No. of gears: - Forward - Reverse

168

Min turning radius at 1960-mm tread without partial braking, m 7.75

Design weight with pusher and plough (dry weight), kg 8185±250

Service weight with pusher and plough, kg 9715±250

16

У

Climatic modification per GOST 15150: УStorage: in dry unheated space and outdoors at temperatures down to minus 45ºC.Tractor components:

• Engine ЯМЗ-236Д2• Mechanical clutch transmission to select ranges and shift gears• Lower rear PTO with 8-splined shaft end

Implements:• Wedge-shaped pusher 2700 mm wide and 700 mm high with wedge-shaped blade edge, concaved

cross-section, mounted on the front hanger• 1-m3 water tanks • Pipe union with tap Di=50 and coupling head to draw water from the tank with engine-driven pump,

two pipe unions with taps Di=20 to fill knapsack fire extinguishers with water from the tank• Wheels with tires 21,3R24 1400 mm across and 540 mm wide• Engine-driven 400-l/min pump Koshin SERH-50B • Two intake hoses, each 51 mm across and 5 mm long provided with combination sleeves on ends• Optional lights:

- Searchlight- Combination vehicle signal- Flasher

• Engine and power train guards• Cab and hood liners• Cab and hood protective pipe frame• Additional SPTA box

Characteristics of double mouldboard ПЛ-1-1:

Capacity, line km/h 3.86 – 5.5

Operating speed, km/h 3.86 – 5.5

Furrow depth, cm 10-15

Furrow width, cm 100

Weight, kg 700

17Weight when shipped by rail, kg 8460± 250

Fuel tank capacity, l 230

Wheelbase, mm 2760

Thread, mm 1960

Min clearance (under engine and power train guards), mm 400

Overall dimensions, mm- Width with pusher- Width without pusher - Length with pusher and rear hanger in transport

position- Height

27002530

65003500

Engine-driven fire pump:- Max pump head, m - Max pump capacity, l/min- Max pump lift from pump axis, m

574408


Purpose:• Excavation of preparatory ripped or filled soils of categories I-III• Digging with minimal damage to terrain• Repair indoors• Services for housing and utilities infrastructure

Operation: • Within the temperature range from 0ºC to plus 40ºC

FULL-CIRCLESINGLE-BUCKET HYDRAULIC EXCAVATOR ЭО1121

Max weight, kg 1800

Max speed, km/h 2


Min digging depth, m 2.4

Min digging radius, m 3.6

Min dump height, m 2.45

Engine power, kW 16.8

Max gradient, deg 30

Work-cycle time, s 15

Design output, m3/h 10.8

Max tilt at excavation, deg 5

Bucket digging force, t 1.2

Bucket arm digging force, t 1

Min life time, h 10000

18

ЭО

Purpose:• Excavation of unfrozen soils of categories I-IV, of preparatory ripped rocky and frozen soils with the lump

size of 500 mm max within the temperature range from minus 40ºC to plus 40ºC at quarrying and trenching

HYDRAULIC EXCAVATOR 5126

Operation weight, kg 32000

Max overall dimensions in transport position, mmLength Width with 600-mm trackWidth with 900-mm trackHeight

10050317034704000

Max digging depth, m 6.2



Max digging force, kN (tf) 175 (17.5)

Bucket capacity, m3 1.0; 1.5; 1.8;

Excavator speed, km/h 2-4

Implements:Bucket, m3

Bucket for bulk materials, m3

Narrow bucket, m3

Push/pull bucket, m3

Ripper, m3

Wide (swamp) crawler, mmHydraulic hammer

1.421.80.81.55221900НМ-440

19


Multipurpose full-circle single-bucket wheel excavator ЭО-33211А is designed to excavate unfrozen soils of categories I-IV and preparatory ripped rocky and frozen soils with the lump size of 200 mm max within the temperature range from minus 40ºC to plus 40ºC

WHEEL EXCAVATORЭО33211

Operation weight, kg 18000

Overall dimensions in transport position, mm Length Width Height

955025003680

Max digging depth, m 5.8

Max digging radius, m 9.2

Max dump height, mm 6.5

Max digging force, kN (tf) 111 (11.1)

Excavator speed, km/h1st gear2nd gear

825

А

20

Excavator ЭО-33211АK is designed to carry out repair and renewal of utility systems and public facilities. Having all the advantages of base excavator ЭО-33211А, the vehicle is additionally equipped with pumping and welding units to minimize the number of vehicles, hands and loss of time at laying, repair and replacement of pipes.The vehicle is able to excavate soils, pump out water from excavations, weld pipes and metal structures.


Impelements of wheel excavators ЭО-33211А, ЭО-33211АK:

Bucket, m3 0.85

Accessory bucket, m3 1.05

Narrow bucket, m3 0.42

Ripper, hydraulic hammer MГ-300-01

Pumping unitPump capacity, m3

Pump head, m10020

Welding unitMax welding current, AWelding time, min

180±105

АК

21


Multipurpose full-circle single-bucket wheel excavator is an excavator of the third size group equipped with backhoe.The excavator is designed for average volume excavations predominant in construction and repair of roads, bridges, engineering structures, and communications at distributed plants.


Weight, t 19

Engine power, kW (hp) 122 (165)

Max speed, km/h 25


Digging depth, m 5.8

Dump height, m 6.5

Digging radius, m 9.2

Max overall dimensions with backhoe in transport position, mm Length Width Height

1060025003500

Gradient, deg 30


Bucket digging force, t 15


22

Crawler hydraulic excavator is an excavator of the forth size group equipped with backhoe. The excavator is designed to excavate soils of categories I-IV, preparatory ripped rocky and frozen soils of categories V-VI at average volume excavations, road and public constructions included.The excavator is intended to operate in areas with the temperate climate within the temperature range from minus 30º to plus 40ºC.

EXCAVATORЭО41211

Max weight, kg 23000

Max overall dimensions in transport position, mm:Length Width Height

1020031703400

Excavator speed, km/h 2-4


Min digging depth, m 7.35



Engine power, kW 127


Design output, m3/h 170

Max tilt at excavation, deg 5

Bucket digging force, t 15


Min life time, h 10000

23


02

MUNICIPALRAIL TRANSPORT

25

DOUBLE-ARTICULATED TRAM CAR WITH LOW BOTTOM DECK THROUGHOUT THE PASSENGER COMPARTMENT, EQUIPPED WITH ASYNCHRONOUS VARIABLE-FREQUENCY DRIVE AND COMPUTER CONTROL OF TRAM CAR PRIMARY SYSTEMS

Body length, mm

Bottom deck height above top of rail, mm

Time of run-up up to 40 km/h, s

Max passenger capacity (at 8 passengers/m2)

Max body height, mm

Bogie centres, mm

Railway engine rated power, kW

Max empty weight, t

Max speed, km/h

Overhaul life, ths km

Min life up to limiting state of body and bogie, years

Body width, mm

Overhead system rated voltage, V

Wheelbase, mm

21355

350

11

210

3030

11500

30 (8 pc)

25

75

500

20

2500

550

1900

TRAM CAR7I409

Seating capacity, pc 42


TRAM CAR7I407

26

Body length, mm

Bottom deck height above top of rail, mm



Max body height, mm

Bogie centres, mm


Max empty weight, t

Max speed, km/h



Body width, mm


Wheelbase, mm

15900

300

11

190

3150

7460

54 (4 pc)

21

75

500

20

2500

550

1900


TRAM CAR7I405

27

Body length, mm



Max body height, mm

Bogie centres, mm


Max empty weight, t

Max speed, km/h



Body width, mm


Wheelbase, mm

15900

11

169

3150

7460

54 (4 pc)

20

75

500

20

2500

550

1900



ENGINES

03

29

FOUR-STROKE, 12-CYLINDER , V-TYPE DIESEL ENGINE WITH TURBOSUPERCHARGER AND INTERCOOLER

Min rated power per GOST 18509, kW (hp)

Modification

Min torque factor of safety, %

Max dry weight of engine completed per GOST, kg

Min rated speed, min-1(r/min)

Min specific fuel consumption, g/kW·h (g/hp·h)

Max torque in standard conditions per GOST 18509, N·m (kgf·m), min

368-550 (500-750)

01.01

35-50

1600

2100

201 (148)

3378 (345)

I2ТВ373 DIESEL ENGINE


30

FOUR-STROKE, 6-CYLINDER, IN-LINE DIESEL ENGINE WITH TURBOSUPERCHARGER AND INTERCOOLER

6T370 DIESEL ENGINE







Modification

169 (230)

25

1850

1100

1089(111)

154 (210)

25

201(148)

201(148)

201(148)

201(148)

201(148)

1900

1100

970.3(99.0)

176 (240)

10

2100

1100

883(90.0)

265 (360)

35-50

2100

1100

1626-1806(166-184)

184 (250)

10

2100

1100

922(94)

04.0503.03 05.0603.04 06.07

31

FOUR-STROKE, 8-CYLINDER, V-TYPE, LIQUID-COOLED DIESEL ENGINE WITH TURBOSUPERCHARGER

8TВ372 DIESEL ENGINE






Max torque in standard condi-tions per GOST 18509, N·m (kgf·m), min

Modification

368 (500)

35-50

2100

1300

2260 (231)

280 (380)

25

201(148)

201(148)

201(148)

1700

1300

1967 (201)

312 (425)

25

1900

1300

1961 (200)

03.0301.04 02.05


32

FOUR-STROKE, 4-CYLINDER, IN-LINE DIESEL ENGINE WITH TURBOSUPERCHARGER AND INTERCOOLER

4T37I DIESEL ENGINE







Modification

184 (250)

35-50

2100

827

1128.9-1254.8(115.2-127.9)

118 (160)

25

201(148)

201(148)

201(148)

201(148)

2000

800

658.3(67.1)

150 (205)

25

1850

827

973(99.2)

118 (160)

25

2000

827

704(71.8)

04.0403.03 05.0503.04

33







Modification

174.5 (240)

10

2100

827

804(81.9)

170 (230)

25

201(148)

201(148)

201(148)

1850

827

1089(111)

132 (180)

10

2100

827

662(67.5)

09.0806.05 08.07


GROUND TRANSPORT ROVERS

04

35

ЛПА52I FIRE-FIGHTING VEHICLE

All-up weight, kg

Average specific ground pressure, kg/cm2

Cross-country performance, max trench/ford, m

No. of gears, forward/rear

Clearance, mm

Fire line laying capacity per 1 h of run time, km/h

Fire line width, wedge-shaped pusher/plough, m

Fuel distance on dry dirt road, km

Overall dimensions, mm

Max extinguishant volume, m3

Travelling/operating speed, km/h

Cab seating capacity with driver, seats/sleepers

Power of diesel engine ЯМ3-238БВ, hp

Fuel tank capacity, l

Power pump capacity, l/min

18900

0.4

2.5/1.2

5/1

400-430

2.4...8.2

3.2/2.0

400

12600х3200х2700

4

50/2.2...8.1

6/2

310

625

400


36

TO TRANSPORT VARIOUS CARGOES AND EQUIPMENT IN CANVAS-COVERED BODY

МГГ529 TRACKEDCARGO CARRIER

Max all-up weight, kg




No. of gears of mechanical GB, forward/rear



Max weight of towed vehicle, kg


Max load-carrying capacity, kg

Clearance, mm

Max speed, km/h

Body seating capacity of folding seat

Cargo body dimensions

13400

310

0.3

400

5/1

7670х3150х2960

625

4000

6/2

5000

400-430

50

6

4080х3140

Max gradient, deg

Max trench, m

Max tilt, deg

Max ford, m

Cross-country performance: 30

2.5

25

1.2

37

TO TRANSPORT, GIVE REST AND SHORT-TERM ACCOMMODATION TO WORKING CREWS

МГП522 TRACKED PERSONNEL CARRIER










Clearance, mm

Max speed, km/h

Body seating capacity, seats/sleepers

Body interior dimensions

13700

310

0.3

400

5/1

7670х3150х3320

625

4000

6/2

400-430

50

12/4

4000х2500х2000

Max gradient, deg

Max trench, m

Max tilt, deg

Afloat


2.5

25

Any depth


38

МГШ52IМI

MULTIPURPOSETRACKED CHASSIS



Power-to-weight ratio, hp/t




Chassis overall dimensions, mm




Max load-carrying capacity, kg

Clearance, mm

Max speed, km/h

Max recovery winch tow force, kg

Min wire rope operating length, m

Cargo bed overall dimensions, mm

13000

310

22.5

0.3

400

5/1

7700х3200х2850

625

4000

6/2

6000

400-430

50

6000

35

4180х3095

Max gradient, deg

Max trench, m

Max tilt, deg

Max ford, m


2.5

25

1.2

39

ГТТМС SNOW AND SWAMP-GOING TRACKED CARRIER



Wheelbase, mm

Track gauge, mm

Weight of towed vehicle, kg

Average specific ground pressure depending on load, kg/cm2


Operating temperature range, °C

Load-carrying capacity, kg

Clearance, mm


Fuel distance, km

Passenger compartment internal dimensions, mm

12380

310

4350

2610

5000

0.28...0.31

6890х3150х2635

-45 to +45

2500

480

5/1

600

2800х2700х2050

Overland

Afloat

Max speed, km/h: 60

6


40

TO TRANSPORT WORKING CREWS AND DELIVER BULKY CARGOES OFF-THE-ROAD

ГТ ТМ TRACKEDCARRIER



Wheelbase, mm

Track gauge, mm

Weight of towed vehicle, kg

Average specific ground pressure depending on load, kg/cm2


Operating temperature range, °C

Load-carrying capacity, kg

Clearance, mm


Fuel distance, km

Passenger compartment internal dimensions, mm

11600

310

4350

2610

5000

0.26...0.29

6890х3150х2460

-45 to +45

2500

480

5/1

600

3000х2700х1670

Overland

Afloat

Max speed, km/h: 60

6

41

The carrier is designed to transport personnel and various cargoes in highly difficult road and climatic conditions of the North, Siberia and the Far East.The carrier design provides wide modifiability to use it as multipurpose chassis for mounting technological and special equipment.

DUAL TRACKED CARRIERДТ 2П

All-up weight (weight with standard equipment) , t 7.3

Cab seating capacity, men 5

Max speed overland, km/h 50

Max speed afloat, km/h 6

Steering Hydraulic

Engine Diesel with turbosupercharger QSB 6.7 (“Cummins”)

Engine power, kW (hp) 179 (240)

Power train Hydromechanical, five-speed, automatic (“Allison”, 3000 series)

Suspension Torsion-bar

Track Rubber-fabric with metal grousers

Average specific ground pressure, kg/cm2 0.16

Average operating fuel rate, l/100 km 120…140

Fuel distance, km 600-700

Environmental safety: emission/noise EURO-2/89-90 dBA

Full-load cross-country performance:

Max gradient on dry ground, deg 35

Max tilt, deg 25

Water obstacles Afloat


Carrier ДТ-5П is designed to transport various cargoes in highly difficult road and climatic conditions of the North, Siberia, the Far East, and on the sea shelf.The design of carrier ДТ-5П provides wide modifiability to use it as multipurpose chassis for mounting technological and special equipment.


All-up weight , t 15

Load-carrying capacity, t 5.0




Steering Hydraulic

Engine Diesel with turbosupercharger L-360 20 (“Cummins”)

Engine power, hp 360

Power train Hydromechanical, six-speed, automatic (“Allison”)




Fuel distance, km 500


Environmental security: soil-vegetable cover Without stripping and damage



Max tilt, deg 20


42

Carrier ДТ-7П is designed to transport various cargoes in highly difficult road and climatic conditions of the North, Siberia, the Far East, and on the sea shelf.The design of carrier ДТ-7П provides wide modifiability to use it as multipurpose chassis for mounting technological and special equipment.



Load-carrying capacity, t 7.0




Steering Hydraulic

Engine Diesel with turbosupercharger L-360 20 (“Cummins”)


Power train Hydromechanical, six-speed, automatic (“Allison”)






Environmental security: soil-vegetable cover Without stripping and damage



Max tilt, deg 20


43


Carrier ДТ-10П-1 is designed to operate on low-load-bearing capacity soils (swamps, snow-covered areas, cross- and rough wooded country) in difficult climatic conditions of the Extreme North, Siberia and the Far East within the temperature range from -50ºC to +40ºC.Carrier ДТ-10П-1 is a unique type of fast vehicles, i.e. articulated tracked vehicles combining high cargo capacity with high cross-country ability and maneuverability in highly difficult road and climatic conditions.


All-up weight , t 21.5

Load-carrying capacity, t 10

Cab seating capacity 4

Max cargo length, m 6



Max speed afloat, km/h 5-6





Max tilt, deg 20


1

44

Carrier ДТ-30-1 is designed to operate on low-load-bearing capacity soils (swamps, snow-covered areas, cross- and rough wooded country) in difficult climatic conditions of the Extreme North, Siberia and the Far East within the temperature range from -50ºC to +40ºC. Carrier ДТ-30-1 is a unique type of fast vehicles, i.e. articulated tracked vehicles combining high cargo capacity with high cross-country ability and maneuverability in highly difficult road and climatic conditions.For twenty years hundreds of carriers ДТ-30-1 are efficiently operated in different Russian regions to transport various large-size cargoes and to carry technological equipment.

DUAL TRACKED CARRIERДТ 30











Max tilt, deg 15

Fording, m 1.8

1

45


Carrier ДТ-30МН is designed to operate on low-load-bearing capacity soils (swamps, snow-covered areas, cross- and rough wooded country) in difficult climatic conditions of the Extreme North, Siberia and the Far East within the temperature range from -50ºC to +40ºC. The carrier ДТ-30МН is a unique type of fast vehicles, i.e. articulated tracked vehicles combining high cargo capacity with high cross-country ability and maneuverability in highly difficult road and climatic conditions.The carrier has a larger and comfortable cab providing user friendliness, steerability and maintainability.






Engine ЯМЗ 8401.10-09



Clearance, mm 350





Max tilt, deg 15

Fording, m 1.8

МН

46

Carrier ДТ-30П-1 is designed to operate on low-load-bearing capacity soils (swamps, snow-covered areas, cross- and rough wooded country) in difficult climatic conditions of the Extreme North, Siberia and the Far East within the temperature range from -50ºC to +40ºC. Carrier ДТ-30П-1 is a unique type of fast vehicles, i.e. articulated tracked vehicles combining high cargo capacity with high cross-country ability and maneuverability in highly difficult road and climatic conditions.













Max tilt, deg 15


1

47


Carrier ДТ-30ПМН is designed to operate in difficult climatic conditions of the Extreme North, Siberia and the Far East within the temperature range from -50ºC to +50ºC. The carrier has a larger and comfortable cab providing user friendliness, steerability and maintainability. The design of carrier ДТ-30ПМН provides wide modifiability to use it as multipurpose chassis for mounting technological and special equipment.It has high cross-country ability and maneuverability.









Clearance, mm 350





Max tilt, deg 15


ПМН

48

49


DRILLING VEHICLESAND ACCESSORIES

05

EQUIPPED WITH HYDRAULIC WINCH TO COMPLETE AND REPAIR WELLS

51

МБРI25 DRILLING VEHICLE

Rated load-carrying capacity, t

Height of telescopic drilling mast with open front and balcony, m

Unladen weight (without additional equipment), kg

Operating conditions, ºC


Supply voltage (including emergency lights), V

Chassis МЗКТ 700300-021

Drawworks

125

35

64000

-45º to +40º

21100х4300х3200

24; 220; 380

Process transport six-axle all-wheel vehicle

Single drum hydraulic drawworks driven by vehicle engine

Min speed

Max speed

Hook speed up, m/s 0.0-0.25 at loads 125-90 t

0.0-1.6 at loads 17-0 t


EQUIPPED WITH HYDRAULIC WINCH TO DRILL AND REPAIR WELLS

52

МБРI60 DRILLING VEHICLE

Rated load-carrying capacity, t

Height of telescopic drilling mast with open front and balcony, m

Unladen weight (without additional equipment), kg

Operating conditions, ºC

Rated power of engine Caterpillar C-15, hp

Speed, km/h

Max axle load, t


Supply voltage (including emergency lights), V

Wheel arrangement

Chassis МЗКТ 700300-020

Drawworks

160

35

67000

-45º to +40º

481 at 1900 rpm

40

12

21100х4500х3200

24; 220; 380

12х12

Process transport vehicle

Single drum hydraulic drawworks driven by vehicle engine

Min speed

Max speed

Hook speed up, m/s 0.0-0.25 at loads 160-118 t

0.0-1.4 at loads 29-0 t

53

ПШГНОROD PUMP DRIVE WITH SINGLE-WORKING BEAM

Options ПШГНО6-2,5 ПШГНО8-3

Max load on wellhead rod, kN (kgf) 60 (6000) 80 (8000)

Wellhead rod travel, m 0.9; 1.7; 2.1; 2.5 1.2; 1.6; 2.0; 2.5; 3.0

Max torque of GB driven shaft, kN·m (kgf·m) 14 (1400) 27 (2700)

Pumping speed per min 2.0-7.4 3.0-8.5

Balancing system Crank drive Crank drive

Gear box ПШГНО6.10.000 ПШГНО8.10.000

GB type Three-speed GB Three-speed GB

GB drive V-belt V-belt

Feed motor power, kW 5.5…11 7.5…15

Control panel ПУСК-4 ПУСК-01М

Drive weight, kg 11265 16660

TO DIRECTLY DRIVE ROD PUMPS AT OIL PRODUCTION FROM DEEP WELLS


ПШГНТROD PUMP DRIVE ON LOW FOUNDATION

Options ПШГНТ4-1,5 ПШГНТ6- 3-2800

ПШГНТ6- 3-3500

Max load on wellhead rod, kN (kgf) 40 (4000) 60 (6000) 60 (6000)

Wellhead rod travel, m 0.45; 0.6; 0.75; 0.9; 1.1; 1.3; 1.5

0.9; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

Max torque of GB driven shaft, kN·m (kgf·m) 7.1 (710) 28 (2800) 35 (3500)

Pumping speed per min 2.0-7.4 2.0-8.3 3.0-8.5

Balancing system Combined Crank Crank

Gear box ПШГН4.10.000 РД6.000 ПШГН. 10.000

GB type Triple Double Triple

GB drive V-belt drive V-belt drive V-belt drive

Feed motor power, kW 4…7.5 22 15…18.5

Control panel ПУСК-4 ПУСК-01М ПУСК-01/ ПУСК-01М*

Drive weight, kg 5500 11320 13800

* at Customer’s option

TO DIRECTLY DRIVE ROD PUMPS AT OIL PRODUCTION FROM DEEP WELLS

54

ПШГНТ6- 3-4000

ПШГНТ8- 3-4000

ПШГНТ8- 3-5500

ПШГНТ10- 3-5500

ПШГНТ12- 3-5500

ПШГНТ12- 3-5600

60 (6000) 80 (8000) 80 (8000) 100 (10000) 120 (12000) 120 (12000)

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

40 (4000) 40 (4000) 55 (5500) 55 (5500) 55 (5500) 56 (5600)

4.2-11.8 4.2-11.8 2.0-8.5 3.0-8.5 3.0-8.5 2.8-8.1

Crank Crank Crank Crank Crank Combined

РД8.000 РД8.000 ПШГН. 10.000 ПШГН. 10.000 ПШГН. 10.000 ПШГН 12.10.000

Double Double Triple Triple Triple Triple

V-belt drive V-belt drive V-belt drive V-belt drive V-belt drive V-belt drive

22 30 22…30 30 30…37 30…37

ПУСК-10 ПУСК-01М ПУСК-01/ ПУСК-01М* ПУСК-10 ПУСК-12 ПУСК-12

11754 11944 13000 14480 17473 18500

55


ПШГНROD PUMP DRIVE ON HIGHFOUNDATION

Characteristics ПШГН6-3-3500

ПШГН6-3-4000

ПШГН8-3-4000

ПШГН8-3-5500

ПШГН8-3.5-5500

Max load on wellhead rod, kN (kgf) 60 (6000) 60 (6000) 80 (8000) 80 (8000) 80 (8000)

Wellhead rod travel, m 1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.2; 1.6; 2.0; 2.5; 3.0

1.8; 2.4; 3.0; 3.5

Max torque of GB driven shaft, kN·m (kgf·m) 35 (3500) 40 (4000) 40 (4000) 55 (5500) 55 (5500)

Pumping speed per min 3.0-8.5 4.2-11.8 4.2-11.8 3.0-8.5 3.0-8.5

Balancing system Crank Crank Crank Crank Crank

Gear box ПШГН.10.000 РД8.000 РД8.000 ПШГН.10.000 ПШГН.10.000

GB type Triple Double Double Triple Triple

GB drive V-belt drive V-belt drive V-belt drive V-belt drive V-belt drive

Feed motor power, kW 15…18.5 22 30 22…30 30

Control panel ПУСК-01/ ПУСК-01М* ПУСК-01М ПУСК-10 ПУСК-01/

ПУСК-01М* ПУСК-10

Drive weight, kg 13000 11650 11800 13000 17200

* at Customer’s option

TO PRODUCT OIL WITH INDIVIDUAL MECHANICAL DRIVE OF BOTTOM-HOLE PUMPS

56

57


622007, Russia, Sverdlovsk region, Nizhny Tagil, Vostochnoye Shosse, 28Phone: +7 (3435) 344-209

119049, Moscow, B. Yakimanka, 40Phone: +7 (495) 737-00-80

[email protected] uralvagonzavod.com

NIZHNY TAGIL

MOSCOW

OPEN JOINT STOCK COMPANY «RESEARCH AND PRODUCTION CORPORATION «URALVAGONZAVOD»

58

OJSC “Ural Factory of Transport Mechanical Engineering”620027, Russia, Yekaterinburg, Sverdlov Str., 6 Phone: +7 (343) 336-71-11e-mail: [email protected] www.uraltransmash.com

JSC “CHTZ- Uraltrack” 454007, Russia, Chelyabinsk, Lenin Avenue, 3Phone: +7 (351) 775-17-60 e-mail: [email protected]

Rubtsovsk branch of Research and Production Corporation “Uralvagonzavod” 658225, Altai Territory, Rubtsovsk, Lenin Avenue, 204Phone: (38557)-43755Fax: (38557) -43487, 43106e-mail: [email protected]: AG45666www.rmz.ru

59

OJSC “Ural Design Office of Transport Mechanical Engineering”622007, Russia, Sverdlovsk region, Nizhny Tagil, Vostochnoye Shosse, 38Phone: (3435) 33-54-74, 33-53-77,Phone/Fax: (3435) 33-58-47, 33-64-93, [email protected]

OJSC “Mechanical Engineering Company “Vityaz”453203, Russia, Republic of Bashkortostan, Ishimbay, Industrialnoye Shosse, 2Phone: (34794) [email protected]


NOTES

60

"URALVAGONZAVOD" — INNOVATIVE INDUSTRIAL EQUIPMENT FOR INFRASTRUCTURE

Documents

military production

national production

dozer06 ripperdozer

modernization tractor

equippedthe tank production

mass production of turnaround

dozer user friendly

capacity soils