Anastasia Suen
Anastasia Suen
rourkeeducationalmedia.com
Anastasia Suen
• CD
• CD cases (standard size)
• clipboard (optional)
• colored tissue paper
• decorative paper
• ear buds
• electronic device (cell phone or MP3 player)
• glue
• glue stick
• hot glue gun (adult permission)
• keyboard
• LED tea lights
• magazines
• markers
• newspaper or cardboard
• paint
• paper
• paper cups (used, rinsed and dried)
• paper tube (from toilet paper and paper towels)
• pencil
• photos
• picture frame
• plastic grocery bags
• plastic spoons
• pushpins
• ruler
• safety goggles
• scissors
• screwdriver (fl athead)
• small glass jar
• spray paint
• stickers
• stick-on letters
• tape (clear)
• tape (colored)
• toothpicks
• tracing paper
• washi tape
• X-Acto knife (for adult use only)
Supplies to Complete All Projects:
Upcycled Gifts and Gadgets . . . . . . . . . . 5
Paper Cup Speakers . . . . . . . . . . . . . . . . . 6
Plastic Bag Bracelet . . . . . . . . . . . . . . . . . 10
CD Photo Cube . . . . . . . . . . . . . . . . . . . . . 14
Keyboard Letter Frame . . . . . . . . . . . . . . . 18
Plastic Spoon Flower Light . . . . . . . . . . . . 24
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Show What You Know . . . . . . . . . . . . . . . . 31
Further Reading . . . . . . . . . . . . . . . . . . . . . 31
About the Author . . . . . . . . . . . . . . . . . . . .About the Author . . . . . . . . . . . . . . . . . . . .About the Author 32
Table of Contents
4
Are you ready to upcycle? Make music speakers from paper cups. Braid a plastic bag into a bracelet. Twist and turn old CD cases into a photo cube. Transform an old keyboard into art. Add plastic spoons to an old CD and create a shiny fl ower light!
Upcycled Gifts and Gadgets
Use something old to make
something new and even
be� er.
5
Paper Cup Speakers• used paper cups,
rinsed and dried
• pencil
• scissors
• X-Acto knife (for adult use only)
• pushpins
• paper tube (from toilet paper and paper towels)
• toothpicks
• electronic device (cell phone or MP3 player)
• decorations such as paint, stickers, or colored tape (optional)
You Will Need:
Rinse the paper cups with hot water before you reuse them to make your
speakers.
Tip:Tip:
6
Three Ways to Make A Musical Gadget!Here’s How:
1. Trace the end of your device near the bottom of a paper cup.
2. Cut a narrow slit to match the bottom dimensions of your device.
3. Press a pushpin into each side of the cup to hold it in place.
Press a pushpin into each side
4. Place your device into the slit and listen to the music!
Use one cup with pushpins:
If you need help cutting the
narrow opening, ask an adult to cut it for you with an X-Acto
knife.
Tip:Tip:
7
1. Place two cups sideways on the table. Trace the end of the paper tube on one side of each cup. Cut a hole to match each circle.
2. Trace the end of your device on the paper tube. Cut a narrow slit to match the dimensions on the bottom of your device.
3. Place one end of the tube into each cup. Then place your device into the slit and press play.
Decorate the paper tube and the
paper cups after you cut the openings. You can
paint the paper, wrap it with colored tape, or
add stickers.
Tip:Tip:
Use two cups and a paper tube:
8
1. Place two cups upside down on the table. Cut a small X in the bottom of each. Then press one ear bud inside each X.
2. Turn the other two cups upside down on the table. Press the pointed end of a toothpick into the paper center at the bottom of each.
3. Now put your hand inside one of these cups and poke the toothpick into the side of a cup with an ear bud in it. Repeat for the other cup. Then turn on the music!
If you don’t have any
toothpicks, pull a small paperclip open. Place the paperclip in the cup with
the ear bud and press down into the standing cup. The
paperclip will hold the cups for each ear
bud in place.
Tip:Tip:
Use four cups, two toothpicks, and your ear buds:
on the music!
paperclip in the cup with the ear bud and press down into the standing cup. The
paperclip will hold the cups for each ear
bud in place.
9
Plastic Bag Bracelet• scissors
• plastic grocery bags
• clear tape
• clipboard (optional)
For optional beads:
• glue
• magazines
• pencil
You Will Need:
You can make a single-color
bracelet by using three plastic strips from the same bag. To make a
multi-color bracelet, use bags with di� erent
colors.
Tip:Tip:
10
Braid a plastic bag Bracelet!
Here’s How:
1. Wash and dry the plastic bags. Now transform the plastic bag into yarn you can braid.
2. First, fl atten the bag and cut the top handles o� .
Plastic bag yarn is also
called plarn.
Tip:Tip:
3. Then cut across the bottom of the bag. After you cut away the top and the bottom of the bag, all that will be left is a wide plastic loop.
4. Smooth out the plastic. Cut three long strips of plastic to the same width.
11
HOW TO BRAID
5. Twist each strip to make it round like yarn.
6. Hold all three strips in your hand. Make a knot at one end.
7. Then begin braiding. Continue until you reach the other end. Then make a knot.
8. Tie the two ends of the braid together. Trim the loose edges with the scissors.
Use a clipboard or clear tape to hold your
yarn in place while you twist it and
braid it.
Tip:Tip:
12
Bonus! Add Beads
You can recycle old magazines to make paper beads for your bracelet. Cut the colorful pages into long triangles with wide bottoms and narrow points at the top.
Wrap the wide end of the triangle around a pencil. Twist the paper around the pencil until only the narrow tip is left. Then add a drop of glue to the tip of the triangle and press it down. After the glue dries, slide the bead o� the pencil.
Add the paper beads to the middle strip as you braid your bracelet.
13
CD Photo CubeYou Will Need:• 4 plastic CD cases (standard size)
• scissors
• pencil
• ruler
• photos or decorative paper
• tracing paper (optional)
• markers (optional)
For optional lamp cube:
• tissue paper
• LED tea light
• washi tape
14
Make a photo cube With CD Cases!
Here’s How:
1. Open all four plastic CD cases and remove the paper inserts.
2. Measure the front insert and use the measurements to create your own artwork with photos, decorative paper, and/or drawings.
3. After you create your artwork, cut the images to size.
You can also use large photos inside each
wall of the cube without any decorative paper. Before you cut your photo, cut a sheet of tracing paper to the correct size. Place the
tracing paper over the photo to help you decide how to crop
the photo and cut it down to size.
Tip:Tip:
15
4. Once your art is ready, it’s time to assemble your cube. Carefully open each CD case and unclick the front from the back.
5. Flip one side of the CD case over and reconnect the hinges to make a right angle. Stand the case up on the table. Repeat for the other three cases.
6. Put your artwork inside one case on the thin CD wall. Then fl ip another CD case over and place the thick CD wall over the back of your art work.
7. The two cases now form a U shape. Click the thick and the thin CD walls together to hold your art in place. Repeat until all four cases are joined.
The secret to making your cube is
to fl ip the CD case over each time you make a new
connection. Then a thick wall will always end up facing a thin wall and you can click
them together without any glue.
Tip:Tip:
fl ipped
16
Bonus! Make a Lamp CubeYou can make your CD cube into a lamp by placing a small LED tea light inside. Use colored tissue paper inside the CD cases to make your lamp glow brightly at night. Cover the top edges of the CD cases with patterned washi tape. cases with patterned washi tape.
17
Keyboard Letter Frame• old keyboard
• fl athead screwdriver
• small picture frame
• hot glue gun (adult permission)
• newspaper or cardboard (optional)
For optional keyboard word art:
• decorative paper
• stick-on letters
• spray paint
You Will Need:
18
Decorate a picture frame with keyboard letters!
Here’s How:
1. Unplug the old keyboard or laptop you are going to upcycle.
2. Press the tip of a small fl athead screwdriver under a key.
3. Pull the handle of the screwdriver up to pull the key up and out of the keyboard. Repeat until you have removed all of the keys.
4. Wash and dry the keys. Some
keyboards use plastic retainers or
metal springs and bars to hold the key caps in place. You may also need to press
the key to the side to release it from the
keyboard.
Tip:Tip:
19
6. Do you want to place all of the letters at the top? Or will you alternate the keys and place some upside down? Move the keys around and see what you like.
7. Prepare the old picture frame for gluing. Remove the backing and the glass.
5. Plan your keyboard design. Place the keys along the edges of the picture frame to determine how many rows of keys will fi t.
If you don’t like the color of the frame,
you can use spray paint to change the color. Ask
an adult to help you. Paint the frame over newspaper
or cardboard in a well-ventilated area.
Tip:Tip:
20
8. Use the hot glue gun to attach the keyboard letters to the frame. Be careful: hot glue guns can burn you. Make sure you have an adult’s help or permission for this.
9. Clean the glass and put it back into the frame.
10. Add a photo or paper with a saying you like. Then close the back.
Reassemble the picture frame in a clean
area. The glass will attract tiny bits of dust and paper from your work area that
you won’t notice until you close everything up.
Tip:Tip:
21
Bonus! Keyboard Word ArtReverse the process and place the keyboard letters inside the frame as art. Spell a simple word inside a small frame. Glue the letters to decorative paper.
If you need to use a consonant or a vowel more than once to spell the words you want to write, you can upcycle your keyboard letters a di� erent way. After you wash and dry the keys, spray paint all of the keys a new color. The next day, use stick-on letters to write the words you want. Then glue the painted keys to a decorative background and frame your saying.
Do you have an old picture frame without
any glass? You won’t need the glass to make keyboard
word art. The keyboard letters will pop out beyond
the frame in this 3-D art project.
Tip:Tip:
22
You can also use the keys to make a monogram, the fi rst initial of someone’s last name. Make a paper template fi rst to help you plan where you will glue the keys. Then trace the monogram letter onto the sheet of paper you will use for the background inside the frame. Glue the keys down one by one to form the letter.
23
Plastic Spoon Flower Light• CD
• plastic spoons
• paper
• pencil
• scissors
• safety goggles
• glue stick
• hot glue gun (adult permission)
• LED tea light
For optional fl ower bud:
• small glass jar
You Will Need:
24
Use an old CD and plastic spoons to make a shiny flower light! Here’s How:
1. Wash and dry the old plastic spoons.
2. Plan your design before you start cutting and gluing. Place the tea light on the sheet of paper. Draw a pencil line around the edge. Cut out the small paper circle.
3. Rub a glue stick around the clear edge near the hole in the center of the CD. Then place the paper circle over the hole in the CD and center it.
You may need to cut extra spoons to end up
with eight that have evenly cut edges. Pieces of the plastic
handles may fl y across the room as you are cutting. Wear
safety goggles and ask an adult to help you.
Tip:Tip:4. Add eight plastic spoons around
the edges of the CD. Point the handles toward the center. How much of the handle will you need to cut?
5. Use scissors to cut the handles o� the plastic spoons.
25
6. One by one, add hot glue to the round bottom of each spoon. Then turn the spoon over and hold it on the CD until it dries in place. Glue all eight spoons to the CD to make the fl ower design. Be careful: hot glue guns can burn you. Make sure you have an adult’s help or permission for this.
7.
8.
Remove the paper circle from the center of the CD.
Turn on the tea light and place it in the center of the CD.
For this fl ower design, the bowl of
the spoon faces up. That means you add the glue
under the round bottom of the spoon. Count to fi ve
as the hot glue dries.
Tip:Tip:
26
Bonus! Make a Flower Bud The fl ower on your CD is fully open. If you use a small glass jar as the base, you can make a fl ower bud! Remove the label as you wash the jar in soapy water. Wash and dry more spoons, too. You’ll need a lot more of them to make a bigger fl ower.
How many spoons you will need depends on how tall and wide the glass is. You may need three or even four dozen spoons to make one fl ower bud.
A short drinking glass can also be used. If your
glass container has a wide mouth, you may be able to place a tea light inside the
fl ower bud.
Tip:Tip:
27
After you cut the spoons, fi gure out where the fi rst row will go. Place one spoon on the glass jar. Turn the spoon so the round bottom faces you and the fl at edge touches the glass. Hold the spoon up to the glass so the upper half of the spoon is above the top of the glass. This time the hot glue will go at the bottom of the spoon where you cut o� the handle.
Add the hot glue to the handle and glue the fi rst spoon to the glass. Then add a new spoon next to the fi rst one. Glue the second spoon to the glass right next to the fi rst one. Place the two spoons side by side. Continue and make the fi rst row around the glass.
28
Work your way down to the bottom of the glass, gluing one row at a time. Stagger each row so the point of the spoon is centered in the open space of the row above it. As you hold the spoons in each new row next to the glass, pull each spoon fl ower petal back a bit so it faces outward.
Depending on the height of the jar, you may need three or four rows of fl ower petal spoons. For the bottom layer of petals, cut o� the spoon handles. (You don’t want the sharp handles to scratch the table.) After all of the glue dries, place your fl ower bud in the center of the table and enjoy! You can also
paint your spoons or color them with permanent markers
before you glue them.
Tip:Tip:
29
crop (KROP): to cut o� or remove the tops or edges of something
dimensions (duh-MEN-shuhns): the length, width, and height of an object
plarn (pluh-ARN): yarn made from plastic bags
right angle (RITE ANG-guhl): a 90 degree angle formed when two lines are perpendicular
to each other
stagger (STAG-ur): to arrange things in a series of di� erent positions
upcycle (up-SYE-kuhl): to reuse old items and make them into something better
Glossary
30
braid 5, 11, 12, 13CD 5, 24, 25, 26, 27CD case 5, 14, 15, 16, 17paint 8, 20, 22, 29paper cups 5, 6, 7, 8, 9
paper tube 8 plastic bags 10, 11tape 8, 12, 17
Index
1. Why do you use two toothpicks or paperclips to build the four cup speakers?2. How can clear tape or a clipboard help you make your bracelet?3. What is the secret to making a photo cube stay together without any glue? 4. When would you need to use stick-on letters for your keyboard art?5. Why should you wear safety goggles while cutting the plastic spoons?
Show What You Know
Bolte, Mari, Eco Gifts: Upcycled Gifts You Can Make, Capstone Press, 2017.Donovan, Sandy, Thrift Shopping: Discovering Bargains and Hidden Treasures, Twenty-First Century Books, 2015.Rau, Dana Meachen Rau, Crafting with Recyclables: Even More Projects, Cherry Lake Publishing, 2017.
Further Reading
31
© 2019 Rourke Educational Media
All rights reserved. No part of this book may be reproduced or utilized in any form or by any means, electronic or mechanical including photocopying, recording, or by any information storage and retrieval system without permission in writing from the publisher.
www.rourkeeducationalmedia.com
PHOTO CREDITS: Cover & all pages: © creativelytara
Edited by: Keli SipperleyCover and Interior design by: Tara Raymo • CreativelyTara • www.creativelytara.com
Library of Congress PCN Data
Upcycled Gifts and Gadgets / Anastasia Suen (Make It!) ISBN 978-1-64156-443-4 (hard cover) ISBN 978-1-64156-569-1 (soft cover) ISBN 978-1-64156-688-9 (e-Book)Library of Congress Control Number: 2018930471
Rourke Educational MediaPrinted in the United States of America, North Mankato, Minnesota
Anastasia Suen is the author of more than 300 books for young readers, including Wired (A Chicago Public Library Best of the Best Book) about Wired (A Chicago Public Library Best of the Best Book) about Wiredhow electricity fl ows from the power plant to your house. She reads, writes, and edits books in her studio in Northern California.
About the Author
Meet The Author!www.meetREMauthors.com
32
rourkeeducationalmedia.com
Don’t throw it out! Upcycle something old or used to make something new! Braid a plastic bag into a bracelet, twist and turn old CD cases into a photo cube, transform an old keyboard into a decorated frame, make music speakers from paper cups, and add plastic spoons to an old CD to create a shiny fl ower light.
AlignmentThis maker space series supports NGSS standards by introducing materials and engineering/design concepts that can be applied to a variety of projects as students tinker, invent, and create solutions to design challenges.
Coding Creations
Fashion Design
Miniature Robots
Movie Props and Special Effects
Smartphone Movies
Upcycled Gifts and Gadgets
BOOKS IN THE SERIES MAKE IT! INCLUDE: