U81X0 Downloading Tool Manual 1 ( Version 1.2 ) FlashRW For U81X0 Version 4.0.0(Build #95V) February 2004 LG Electronics Inc.

U81X0 Downloading Tool Manual U81X0 Downloading Tool Manual 1

U81X0 Downloading Tool Manual( Version 1.2 )

FlashRW For U81X0Version 4.0.0(Build #95V)

February 2004

LG Electronics Inc.


The Purpose of Downloading Software

• To make a phone operate at the first manufacturing

– A phone = Hardware + Software

– A phone cannot operate with hardware alone.

– The hardware with the suitable software can operate properly.

• To upgrade the software of the phone

– The software of the phone may be changed to enhance the performance of the phone.

– The older version software of the phone can be replaced to the newer version.

• Download Tools

FlashRW : Download tool for U81X0 software


Download Environment Setup

U81X0 Download can be done via UART & USB

U81X0 UARTdata cable

USB cable


U81X0 Download (1) – FlashRW configuaration1. Execute FLASHRW.exe.

2. Press the “Global Settings” on the top menu to configure FlashRW environment


U8110 Download (2) – FlashRW configuaration

3. Select Loader File for Product.

You can use browse button to select Loader File.

You must select only U8120_CXC1325712_R2H(R5E_Signed by cust_brown).pldr for U8120.

You may select any loader of 3 loaders in loader folder for U8110.

Loader File is provided with FlashRW.

4. Select Port configurations for both RS232 Port and USB Port.

Baudrate should be 115200bps.

You have to do FlashRW configuration only at the first time of installation


U81X0 Download (3) – Phone Model Selection1. Press Button for Model.

2. Select Model to download images


U81X0 Download (4) – Download file selection

1. Press “Add” button to select LGE SSW files to download .

2. Press “Add1” button to select LGE GDFS file to download.

<Before Select> <After Select>

Click to select file

U81X0 download file is selected


U81X0 Download (5) – Connect & Download

1. Click on connector icon( ) to connect to the phone

Check the Dialog Box that say “Please,switch on the target”.

2. Connect the phone to PC via Cable for Downloading.

Phone should be turned off.

3. Turn the phone on to connect to PC.

1


U81X0 Download (6) – USB Driver Install1. If you use FlashRW Tool firstly, Error will happen because of USB Driver uninstalled.

You have to do FlashRW USB Driver Installation only at the first time of installation


U81X0 Download (7) – USB Driver Install

2. Push “the Next Button” in Found New Hardware Wizard

3. Select “Search for a suitable driver for my device” in Found New Hardware Wizard



4. Select “Specify a location” in Found New Hardware Wizard

5. Push “the Browse Button” , and then select “USB driver Information file”

This File is provided with FlashRW.



6. Push “the Next Button” in Found New Hardware Wizard

7. Push “the Finish Button” in Found New Hardware Wizard


8. Close FlashRW.exe

9. Remove & Insert Main battery to reset the phone

% This action for USB Driver Install is done only at the first time of installation

If you want to download Software, just do as same as U81X0 Download (5) – Connect & Download says



U81X0 Download (11) – Connect & Download

< While Downloading > < After Downloading finished >

Check this massage to confirm download finishProgress Bar is running while downloading


1. Check if UART & USB Port configuration is right.

2. Do not change RS-232 baud rate(115200BPS). It is fixed and never changed.

3. Check if UART & USB Cable is connected.

U81X0 Download (12) - Trouble shooting• Check these questions when trouble happens.

U81X0 Downloading Tool Manual 1 ( Version 1.2 ) FlashRW For U81X0 Version 4.0.0(Build #95V) February 2004 LG Electronics Inc.

Documents