Tradeways
Formenta was founded in 1972 by Olov and Inga Nyholm. Together they built the factory
in Sweden from the ground up and specialized in manufacturing of components in
fiberglass reinforced polyester. Today Formenta is enjoying over 40 years of experience in
the field.
Throughout the years, Formenta has geared its product line towards public environments
and has also become the world’s largest manufacturer of fiberglass flagpoles.
Today, Formentas products include flagpoles, lighting columns, bike stands, planters and
sand containers. Formenta has production facilities in Sweden, Hungary and Denmark with
sales offices in Holland and Brazil.
Formenta’s lighting columns are made from composite, a maintenance-free material
enabling a combination of light weight and extreme strength. The lighting columns are
developed and produced at our factory in Sweden through close cooperation with product
developers and electric engineers. The goal throughout the development was to produce an
aesthetically attractive lighting column enhancing the look and feel of public outdoor
environments with minimal environmental impact.
Formenta’s standard lighting columns come in heigths of 3m, 4m,
5m and 6m. The lighting columns are conical and the gelcoat
shaft is shipped in any RAL-colour. This allows us to offer lighting
columns in 200 different colours. The door was developed to
withstand stress and impact in any public environment. Optional lock
is available when needed.
With Formenta’s Swedish-made lighting columns weight is reduced by
70% compared to traditional steel-made lighting columns. Formenta’s
lighting column is also maintenance-free and does not rust. It is also non-
conductive which is, from a safety standpoint, advantageous in public
environments.
FORMENTA
D1
L
D2
U
H
K
TECHNICAL FACTS
Model H U K D1 D2 L M
mm mm mm mm mm mm kg
CLC3M 3000 500 1000 108 60 85 x 300 8
CLC4M 4000 500 1000 108 60 85 x 300 11
CLC5M 5000 500 1000 108 60 85 x 300 16
CLC6M 6000 500 1000 108 60 85 x 300 21
GREAT ENVIRONMENTAL ADVANTAGES
Environmental benefits with Formenta’s productionThe production of Formenta’s lighting columns is done without water discharges, an important difference compared to aluminium or steel column production.
The low weight per column, in relation to volume, also brings environmental benefits through the transportation of both raw materials and finished product. Also, only a fraction of the power consumed when producing aluminium or steel products is used in polyester product manufacturing.
Formenta’s energy consumption has been greatly reduced the past few years, and the largest power source comes from bioenergy. At the same time our electricity consumption has been reduced by one third, despite the fact that our production volume has increased. The electricity used in Formenta’s production come from environmentally friendly water or wind power.
RecyclingThe recycling of Formenta’s lighting columns is done through milling of rest material, which is then sent to a pre-approved recycling plant. Production overspill and waste has, over the past five years, been reduced in relation to our production volume. Waste is also used as fillers.
Environmental ImpactFormenta’s lighting columns of high-quality polyester material are inert, which means emissions of polluting nature to surrounding air, ground- and water systems are next to none. This can be compared to steel and aluminium production where constant polluting emissions are unavoidable, especially heavy metals.
Low weight ISO-certified supplier
200 colours in RAL-scale
Tested by SPNon-conductive Brilliant finish Recyclable Swedish made Extremely durable
No corrosion
Box 525, SE-331 25 Värnamo, SwedenPhone: +46 (0)370 692 550 | Fax: +46 (0)370 491 28
[email protected] | www.formenta.se
Tradeways International FZE A3 - 034 Saif Zone P.O Box 7850 Sharjah, UAE
Tel : 06 - 5573060 ; Fax : 06 - 5573061 [email protected] ; [email protected]