Trust in every measure Servicing all Your Test and ...lgstatic.transcat.com/media/pdf/Transcat-Services-Brochure-2017.pdf · Trust in every measure Servicing all Your Test and ...

Trust in every measure

Trust in every measure

Trust in every measure

Trust in every measure

Servicing all Your Test and Measurement Requirements

Calibration and Repair Services | Sales | Rentals | Validation | Analytical

2 Transcat.com | 800-828-1470

Trust in Every MeasureFor over 50 years, Transcat has dedicated itself to the science of accuracy and risk mitigation.

Whether in the products first manufactured by Transcat, to the over 300,000 accredited calibrations performed annually, we are one of North America’s largest and leading calibration and compliance services providers. Transcat is a company you can trust to deliver the quality performance requirements you need.

With our experience in servicing some of America’s largest companies in our targeted industries & the assurance of a publicly traded company working with you for both today and tomorrow, Transcat is committed to your company’s specific needs.

Explore Our Service Offerings Industries and Clients Served

Calibration Services

Calibration Service Options

Network of Calibration Labs

Calibration Capabilities

Reference Standards Capabilities

Permanent Onsite Services

C3 - Asset Management Software

Dimensional Calibration Services

Instrument Repair Services

Mobile Calibration Laboratory

Laboratory Instrument Services

Consulting Services

New Instrument Calibration Services

New Product Offerings

Instrument Rental Services

Used Test Equipment

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

3800-828-1470 | Transcat.com

Original (Find from PDF)

Recreated PMS

Our Focused and In-Depth Experience is within the Major Market Segments of:

· Healthcare and other FDA Regulated Industries· Energy Generation and Transport· Chemical and Process Manufacturing· Discrete Manufacturing

Transcat understands each industry’s unique needs. This allows us to help reduce risk while providing a full spectrum of quality services.

Servicing the Needs of Our CustomersAs one of North America’s top 100 companies, we are a quality focused and ready to service all your test and quality measurement requirements. Whether you need product selection and validation, ongoing calibration, repair and product replacement, or consulting and remediation services, Transcat is the name you can trust.

Industries and Clients Served

FDA Regulated

AlternativeEnergy

Process

Utility

4 Transcat.com | 800-828-1470

In-Lab Calibration · Item is shipped back in five business days

for most services · We provide local pickup and delivery services · We offer primary level calibration capabilities

Onsite Calibration · This premium service offers you the same levels

of quality service you have come to expect from our in-lab calibrations

· Onsite offers maximum flexibility

In-Process Calibration Services · Our highly trained technicians can come onsite to

calibrate your in-process instruments - including transmitters, sensors, switches, recorders, controllers, ovens, chambers, and more

Mobile Calibration · Bringing our lab to you for cost effective calibrations · Climate-controlled network of mobile labs

Repair Services · Repair Center based in our Houston Calibration Lab · Cost effective repairs on most instruments

Managed Services · Manage all your calibrations through our

extensive network of approved vendors

Calibration Services

Visit Transcat.com/service-types to learn more

Largest Scope of Accreditation in the Industry

5 800-828-1470 | Transcat.com

Calibration Service Options

Certificate with Uncertainties

Certificate with Data

CertificateOnly

Detailed Uncertainties Provided

Enables Evaluation of Risk in Instrument Applications

Tolerances Provided

As-Found / As-Left Data Provided

Enables Analysis of an Instrument’s Impact on a Process

Test Uncertainty Ratio (TUR) Calculation Provided

ISO/IEC 17025 Accredited

NIST Traceable

ISO 9001 Compliant Quality System

Accreditation Includes ANSI/NCSL Z540-1-1994

Greater than 4:1 Test Uncertainty Ratio (w/ Exceptions Noted on Certifcate)

21 CFR Part 820.75 Validated Metrology Management System

21 CFR Part 11 Validated Electronic Signatures

10 CFR Part 21 and Part 50 Appendix B Compliant

40+ American Society for Quality Certified Calibration Technicians

Calibrated to Manufacturer’s Specifications

CertificateOnly

Provides an accredited ISO/IEC 17025 calibration that is NIST traceable, OOT included, but does not include tolerances, as-found/as-left data or TUR data

Certificatewith Data

Provides analysis of an instrument’s impact on a process by including tolerances and as-found/as-left data

Certificate with Uncertainties

Provides detailed measurement uncertainties and ratio data that enable an analysis of measurement risk

Customer:

PO Number:

35 VANTAGE POINT DRIVE

ROCHESTER, NY 14624

TRANSCAT RENTAL

.

NONE

CERTIFICATE OF CALIBRATION

200914-0

NVLAP LAB CODE

Certificate/SO Number: 1-SAMPLE-5-1 Revision 3

Calibration Procedure:

Due Date:

1-AC06757-6

Aug 12, 2015Aug 13, 2016

Calibration Date:

In Tolerance

As-Found:As-Left: In Tolerance

Manufacturer Specification

Calibrated To:

Fluke CorporationSerial Number:

SAMPLE 03

Manufacturer:700P07Pressure Module, Gage, Isolated

SAMPLE 03

Model Number:Description:

ID:

Transcat Calibration Laboratories have been audited and found in compliance with ISO/IEC 17025:2005. Accredited calibrations performed within the Lab’s Scope of

Accreditation are indicated by the presence of the Accrediting Body’s Logo and Certificate Number on this Certificate of Calibration. Any measurements on an

accredited calibration not covered by that Lab’s Scope of Accreditation are listed in the notes section of the certificate. This report must not be used to claim product

certification, approval, or endorsement by NVLAP, NIST, SCC, NRC, CLAS, ANAB or any agency of the Federal Government. NVLAP, NIST, SCC, NRC, CLAS or

ANAB do not guarantee the accuracy of an individual calibration by accredited laboratories.

Transcat calibrations, as applicable, are performed in compliance with the requirements of the Transcat Quality Manual Revision I, ISO 9001:2008, ANSI/NCSL

Z540.1-1994 (R2002), and ISO 10012:2003. When specified contractually, the requirements of ISO TS16949:2009, 10CFR21, 10CFR50 App. B and ASME NQA-1:2012

are also covered. Complete records of work performed are maintained by Transcat and are available for inspection. Laboratory standards used in the performance of

this calibration are shown on the Supplemental Report.

Transcat documents the traceability of measurements to the SI units through the National Institute of Standards and Technology (NIST), or the National Research Council

of Canada (NRC), or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Arrangement, or accepted fundamental

and/or natural physical constants, or by the use of specified methods, consensus standards or ratio type measurements. Documentation supporting traceability

information is available for review at a Transcat facility. The measured quantity and the measurement uncertainty are required for further dissemination of traceability.

Uncertainties are reported with a coverage factor k=2, providing a level of confidence of approximately 95%. All calibrations have been performed using processes

having a TUR of 4:1 or better (3:1 for mass calibrations), unless otherwise noted on the Supplemental Report. The Test Uncertainty Ratio (TUR) is calculated in

accordance with NCSL International RP-18. For mass calibrations: Conventional mass referenced to 8.0 g/cm³.

The results in this report relate only to the item calibrated or tested, and the determination of in or out of tolerance is specific to the model/serial no. referenced above

based on the tolerances shown on the supplemental report; these tolerances are either the original equipment manufacturer’s (OEM’s) warranted specifications or the

client’s requested specifications. Any number of factors can cause a unit to drift out of tolerance at any time following its calibration. Limitations on the uses of this

instrument are detailed in the OEM’s operating instructions. This certificate may not be reproduced except in full, without the written approval of Transcat. Additional

information, if applicable may be included on separate report(s).

Certificate - Page 1 of 2

Reprinted on March 01, 2017

Revised on March 01, 2017

OPS-F20-013R1 01/23/2017 FP001R0 10/14/2016

Date Received: October 07, 2014

Revised On:

Customer Number:1-999-000

Service Level : R3

6 Transcat.com | 800-828-1470

Transcat Labs

Transcat Headquarters

Map Legend

Phoenix

San Diego

Los Angeles

Portland

Denver

Houston

NashvilleCharlotte

San Juan

DaytonSt. Louis

Ft. Wayne

MilwaukeeToronto

Ottawa

Montreal

Boston

Paxinos

Rochester

Philadelphia

Irvine

Transcat’s calibration labs are strategically located to be accessible to all our customers. Whether you're a single site or a company with multiple plants, we offer local services with international capacity and scope.

Network of Calibration Labs

Visit Transcat.com/labs to learn more

7 800-828-1470 | Transcat.com

Electrical · Ammeters · Clamp On Meters · Dataloggers · Digital Multimeters · HiPots · Megohmmeters · Voltmeters · Wattmeters

Electronic · Counters · Decade Boxes · Function Generators · Impedance Meters · Oscilloscopes · Power Supplies · Recorders · Signal Generators · Stopwatches and

Timers

Calibrators · Current · Multifunction Process · Pressure · Process Loop · RTDs · Simulators/Calibrators · Temperature · Thermocouple · Voltage

Dimensional · Calipers · Crimp Tools · Micrometers · Pin Gages

Mass · Class 4-7 up to 25kg · Scales and Balances

Temperature · Chambers · Controllers · Digital Thermometers · Dry Blocks · Heat Sealers · Industrial PRTs · Infrared Thermometers · Liquid Bath · Liquid in Glass Therm. · Ovens · RTDs · Solder Stations · Temperature Indicators · Thermistors · Thermocouples

Pressure · Absolute Gauges · Controllers · Deadweight Testers · Indicators · Manometers · Micromanometers · Transducers/

Transmitters · Vacuum/Pressure

Gauges

Physical · Accelerometers · Air Flow · Conductivity Meters · Force Gauges · Humidity · Light Meters · Load Cells · Particle Counters · pH Meters · Pipettes · Tachometers · Torque Testers/Analyzers · Torque Wrenches

Reference Level Capabilities Temperature Probes · Metrology Wells · RTD/PRT Probes

(Kaye Intelligent) · Secondary Stand. PRTs · SPRTs · Standard Ref. PRTs

Dimensional · Diameter Master Rings · End Measuring Rods · Gage Blocks · Plug Gages · Sine Bars/Plates · Thread Wires

RF/Microwave · Counters · Network Analyzers · Power Meters/Sensors · Signal Generators · Spectrum Analyzers

High Voltage · AC (0 to 80k) · DC (0 to 120k) · Probes, Dividers,

Meters

Pressure · Dead Weight Testers,

Pneumatic & Hydraulic · High Precision

Pressure Controllers and Transducers

· Very Low Pressure Installments

DC/Low Frequency · Current Shunts · High Accuracy DMM · Multifunction Calibrators · Phase · Precision Capacitors · Precision Inductors · Precision Resistors

Mass · Class 1-3 up to 5kg · Load Cells · Proving Rings · Weights

Humidity

NEW · Air Velocity · Dew Point

Calibration Capabilities

Visit Transcat.com/capabilities to learn more

8 Transcat.com | 800-828-1470

Reference Standards Capabilities

Visit Transcat.com/ref-standards to learn more

Reference Mass Calibrations · Echelon II and III standards · Class 1 to 7 weights · Facilities throughout North

America

Reference Electrical Calibrations · Reference multimeters · Reference multi-function

calibrators · AC standards and more

Reference Temperature Calibrations · Ranges from –195° to 660°C · Industry best uncertainties · Comparison & fixed point methods

Reference Pressure Calibrations · Pressure calibration to 72,500 PSI · Low pressure to -60” H2O · Deadweight tester calibration

Reference Humidity · 10% - 95% RH · Uncertainties of 0.5%

Reference Dimensional · Multiple disciplines available

9 800-828-1470 | Transcat.com

Why choose a Resident Technician? · Customers have access to all of Transcat’s

metrology experts, calibration software, and datasheets

· It is tailored to your specific needs based on multiple meetings with Transcat metrology experts

· We reside at your facility, saving you time and overhead in preparing and shipping instruments to a calibration service provider’s lab offsite

· Transcat has done multiple permanent onsites for companies in various industries including medical device and manufacturing

Permanent Onsite Calibration Services

Visit Transcat.com/onsite to learn more

Our Resident Technician service option is a Transcat-operated calibration lab tailored to your needs and located at your facility. We set up staff and manage your facility’s calibration lab based on your needs and quality standards.

10 Transcat.com | 800-828-1470

C3 - Asset Management Software

Control and Manage Your Assets · Manage your calibrated and non-calibrated assets · Automatically includes all assets calibrated by Transcat … plus

you can easily load all your other assets into the system · Easy to create reports specific to each level of your organization · Allows you to manage your assets at the user or site specific level

to avoid unnecessary product purchases and transfers

Organization Hierarchy

Helps Maximize Your Asset Investment · Leverage the most current business intelligence tools to help you

manage your business · Integrated calibration system & automated communications ensure: - All your instruments are calibrated on time and to your quality

system’s specifications - Your ability to better manage Out-of-Tolerance situations

quickly, therefore reducing downtime

Custom Reporting

Custom Dashboard

Remain Compliant with Your Quality Systems · Validated to 21CFR Part 820.75 and 21CFR Part 11 to meet

stringent FDA requirements · Simple and intuitive design enhances user compliance to improve

accuracy and reduce costs · Allows easy access to all your calibration records including

certificates, current instrument status, and much more

Visit Transcat.com/c3 to learn more

A truly industry unique integrated asset tracking software for quality control and cost management.

Software by

™

11 800-828-1470 | Transcat.com

· Pin Gages· Gage Blocks· Length Standards· Precision Weights

· Ring Gauges· Thread Gauges· Micrometers· Calipers

· Scales & Balances· Height Gages· And More

GD&T and parts inspection (PPAP) services are also available.

Dimensional Calibration Services

Visit Transcat.com/dimensional-analysis to learn more

Transcat is equipped to meet a variety of dimensional calibration analysis needs. Our advanced metrology standards and tools enable us to inspect and analyze the dimensions of any piece.

12 Transcat.com | 800-828-1470

ConvenientOur broad range of repair services saves you the time and inconvenience of sending your test and measurement equipment to multiple OEMs.

Cost Effective and FastFlat rate pricing available on the most popular instruments we repair – we turn your jobs around faster than the OEM.

We Repair: · Multimeters · Pressure Calibrators · Process Calibrators · Pressure Modules · Megohmmeters · Dry Blocks · Decade Boxes · Power Supplies · Temperature Baths · Hi-pots · Oscilloscopes

Manufacturers:· Fluke· Altek· Megger· GE's Druck· Keysight· Transmation

· And Many More!

Expert instrument repair - convenient, cost effective and fast.

Instrument Repair Services

Visit Transcat.com/repair-services

13 800-828-1470 | Transcat.com

Lab Accuracy with Mobile Ease· 17025 Accredited Lab· Capabilities Include: Pressure, Torque, Temperature, Hydraulics, Electrical and More

· Rental & Product Purchases Immediately Available

· Nationwide Scheduling· Access to Transcat’s Network of Labs & Repair Centers· Reduce Equipment Downtime· In-Process Calibration Services Available

Contact your sales rep to schedule your next mobile calibration.

Mobile Calibration Laboratory

Visit Transcat.com/onsite to learn more

Transcat now provides the next generation in calibration. Transcat’s mobile calibrations services provide premium service with maximum convenience. Mobile labs are located throughout the US.

14 Transcat.com | 800-828-1470

A leading analytical and validation service provider to the Life Sciences Industries.

Laboratory Instrument Services

· Validation support for small laboratory equipment, such as pH meters, balances, centrifuges, and more

· Temperature studies for storage equipment such as: freezers, refrigerators, incubators, environmental chambers, stability chambers and walk-ins

· Wireless warehouse temperature and humidity mapping capabilities

· Autoclave load pattern validation and glassware washer load validation services

· Oven services including depyrogenation ovens with endotoxin challenge studies

Analytical Services for:· Chromatography qualification services for HPLC, UPLC, and GC system

· Qualification solutions for other analytical equipment such as UV/Vis specs, dissolution baths, FTIR, plate readers, autosamplers, and titrators

Visit Transcat.com/validation to learn more

15 800-828-1470 | Transcat.com

Consulting Services

Visit Transcat.com/consulting to learn more

· Short and long term contracted assignments· Designing and improving calibration programs· Solving calibration program problems· Updating of calibration software tools· Collaboration with base business & auditors

· Calibration program audits· Calibration program gap remediation services· Technical writing· SOP revision and development· Technical and quality training

Transcat’s consulting services can assess your calibration quality systems and help design, revise and enhance them to ensure a robust, compliant, and sustainable operating solution.

16 Transcat.com | 800-828-1470

Save Time · Avoid sending it out · Calibrate when you buy your instrument · Instrument is ready to use when it arrives

Meet Quality Standards from the Start · 95% of our calibrations are 17025 accredited and

meet regulatory requirements the day they arrive

Reduce Risks · Reduce risks from failures, production delays,

compromised safety, and product defects · You simply can’t afford not to have your newly

purchased instrument calibrated

Keep Track of Instrument Documents · Secure access anytime day or night through

Transcat’s CalTrak® Online system · Automatic recalibration notices will be sent

when items are due

Need Your New Instrument Calibrated and Shipped Yesterday? · Most items are calibrated within 3 days · Expedited services available upon request

New Instrument Calibration Services

Visit Transcat.com/why-cal to learn more

17 800-828-1470 | Transcat.com

New Product Offerings

· Over 200,000 different test and measurement instruments from over 500 of the industry’s leading brands · First to market with the most comprehensive selection of new products · Same day shipping available on our best-sellers · Our product specialists have an average of over 10 years experience in the industry · New instrument calibration available

The right product, when you need it, at the best value.

Visit Transcat.com/products to learn more

18 Transcat.com | 800-828-1470

Visit Transcat.com/rental to learn more

Instrument Rental ServicesShort and long term test and measurement equipment rentals available.

· Short and long term rentals (Weekly or Monthly) · Same day shipping of in-stock items · Instruments are calibrated and ready to go · Over 90 major manufacturers are available · Rent with the option to buy · Trade in used equipment for cash or credit

Trade-In Equipment · Trade your old equipment in for newer upgraded

models, substitutes, or use as a credit for calibration or repair services in Excalibur’s 17025 accredited lab

· Consignments also welcome - the very best way to maximize your trade-in dollars is to convert idle assets to immediate cash

Why Rent from Transcat: · Do you need additional equipment for planned

or unplanned shutdown? · Is your test equipment out for service and

you need a short term rental? · Can’t purchase an instrument and need a

rent-to-buy option? · Do you need to trade up to a newer model?

19 800-828-1470 | Transcat.com

Used Test Equipment

· We buy, repair, and refurbish used equipment, so ask us about your trade-in!

· Decrease acquisition and maintenance cost with used equipment

· Used equipment is given an extensive quality inspection

· We specialize in Lab Standards· All equipment is mechanically and cosmetically refurbished

· Equipment comes calibrated with data (note: used equipment does not come with accreditation)

· Manuals and accessories are included with unit· One year warranty included with extensions available

Transcat has over 25 years of experience as a premier supplier of refurbished and used test and measurement equipment.

Visit Transcat.com/used to learn more

Calibration

[email protected]

Trust in every measure

Trust in every measure

Trust in every measure

Trust in every measure

.com