TRANSLUCENT COATINGS AND PAINTS FOR WOOD

TRANSLUCENT COATINGS AND PAINTS FOR WOODRemmers Premium Quality for Demanding Applications

Wood PreservativeStain Outdoors

Wood RefinementIndoors

Protection & CareWood in Gardens

Wood Windows &Wood Doors

Finishing PaintsIndoors & Outdoors

2

Table of Conten

ts

3

Wood as a Material

5 Wood as a Natural Material6 Wood’s Natural Enemies8 Durability of the Types of Wood 8 Structural Wood Protection 9 General Notes on Working

10 Overview of Product Categories

Translucent Wood Preservative Stains for Use Outdoors

13 HK STAIN 15 WOOD CREAM16 LONG TIME STAIN UV18 UV WEATHER PROTECTION STAIN 20 WOOD PRESERVATIVE CLEAR21 WOOD PRESERVATIVE PRIMER

Refinement of Wood Indoors

23 DECORATIVE WAX STAIN 24 STAIR & PARQUET VARNISH25 STAIR & PARQUET FRESH26 HARD WAX OIL27 HARD WAX POLISH29 ANTI-INSECT PLUS

48 Tested Safety49 Renovation Intervals 50 Find.Fix.Matrix for Wood in Outdoor Areas52 Find.Fix.Matrix for Wood in Indoor Areas53 Line of Products

Protection & Care Wood in Gardens

43 MAINTENANCE OIL45 GARDEN WOOD OILS47 GREEN GROWTH REMOVER

Finising Paints Indoors & Outdoors

37 SEALING PRIMER38 FINISHING PAINT40 ALL PRIMER41 COLOR VARNISH 2 IN 1

Wood Windows & Wood Doors

31 UV TRANSLUCENT TOP32 COMPACT VARNISH PU33 COMPACT STAIN PU34 UV OPAQUE TOP35 CARE SETS FOR WINDOWS & DOORS

48

4

4

The

Material W

ood

5

The Liveliness of Wood as aBuilding Material

We feel very comfortable when sur-rounded by this material. That’s whyleading architects and constructionengineers prefer wood as a warm,natural building material whendesigning gardens and buildings,particularly when it comes to interiorfinishing. The coziness of wood andits unmistakable character is the rea-son it is used so often.

WOOD IS A NATURAL MATERIAL And Rightfully a Popular Material

Premium Protection UsingNature as a Model

Trees are equipped with a naturalmeans of protection – and that is thebark. Bark protects tree wood fromdrying out and particularly from themultitude of weather influences suchas sun, wind, rain, frost and heat.

Trees are supplied with all the impor-tant nutrients they need to grow andflourish through their roots. This sup-ply system protects the life cycle oftrees throughout centuries and thetrees themselves form an environ-ment that provides safety forhumans and animals.

Remmers Baustofftechnik made ittheir goal early on to develop prod-ucts with the help of their technicaldevelopment department thatrestore this natural protection forwood used in construction and fin-ishing in the form of state-of-the-artcoating systems. Wood in its thou-sands of structures and shades ofcolour is the base for the use of thenew translucent coatings and finish-ing paints that are available fromgood specialist dealers.

Register No.: DE-S 161-00007

EC-Eco-Audit, awarded to the

Remmers production sites.

6

WOOD’S NATURAL ENEMIESThe Course of Damage Caused by Moisture, Blue Stain and Rot

UV-Rays

Sun is hard on wood surfaces – notjust because of its heat but alsobecause of its ultraviolet rays thatpenetrate into the wood. In combina-tion with precipitation, the colour ofunprotected wood can change to sil-ver grey in just a few weeks tomonths.

Fine wood fibres on the surface ofthe wood then begin to stand uprightand the surface begins to losestrength. This change in colour andproperties of the surface which isnormally not desired can be prevent-ed by using pigmented coatings.

UV Weather Protection Stain or LongTime Stain UV in clear UV+ now allow wood used in outdoorareas to be treated with a clear stainfor the first time, thanks to highly eff-fective UV-blockers which preventthe wood from turning grey for quite awhile.

Algae

Especially in forested or tree-richareas, the green growth of theselower organisms speads easily,quickly making wood in outdoorareas look unattractive.

HK Stain is formulated with an algae-cide which prevents premature infes-tation with algae.

Moisture

Wood outdoors is continuously sub-jected to moisture: rain, dew, con-densation and such like cause themoisture content in the wood to rise;when the water evaporates, the con-tent sinks again. The result of thiscontinous process: cracks in the sur-face. Moisture that penetratesthrough these cracks or through dif-fusion must leave the wood again,otherwise the wood becomes water-logged beneath the surface – abreeding ground for blue stain androt that destroy wood.

That’s why it’s important to select theright coating for the wooden buildingelements:

In the case of windows and doors, so-called dimensional stability is particu-larly important. That’s why thick-layerstains are used for these: The penetra-tion of moisture is prevented by thecoating which in turn prevents swellingand shrinkage processes that causethe element to lose its shape and then,for example, can’t be opened or closedproperly anymore.

In the case of so-called non-dimen-sionally stable building elements,e.g. siding and fences, the penetra-tion of moisture, e.g. through endgrain wood or through cracks, cannever be completely prevented.That’s why it’s important to use so-called thin-layer stains here so thatthe wood can breathe and the mois-ture can leave the wood again.

Blue Stain

Blue stain is a type of fungus thatdiscolors wood, causing visible,black-bluish stains. Blue stain doesnot destroy the wood but it certainlyimpairs its appearance.

However, blue stain prepares theway for other fungi that destroywood (rot) to flourish because it per-forates the cell walls, making it easi-er for the wood to absorb more water(capillarity).

Rot

Rot is the most dangerous form offungus that causes damage becauseit destroys the structure of the wood;the wood loses its stability anddecomposes.

Insects that damage wood

Along with fungi that discolor anddestroy wood, there are also animalpests which love wood. TheEuropean house borer, for example, isone of the most dangerous insectsthat destroy wood in moderate cli-mate zones and infest soft wood inparticular. They lay their eggs incracks and the larvae preferablygnaw the outer layers. The damagecaused by other insects that destroywood essentially takes place by thesame principle with the samescheme. The eggs are laid by theinsects in or on the wood. The larvaehatch from the eggs and it is then thelarvae that actually destroy the wood.

7

Growth ofbacteria

Perforation ofcell walls

Feuchtig keit

Growth ofblue stain

Increase ofcapillarity

Rot

Perforation of cellwalls

FEUCHTIGKEITMOISTURE

Moisture

8

THE DURABILITY OF DIFFERENT TYPES OF WOODWhen to Use Wood Refinement – When to Use an Additional Preservative?

Whether it’s necessary to use achemical wood preservative on woodused outdoors depends on the dura-bility of the type of wood used. As arule, ‘very durable’ and ‘durable’types of wood only need refinementwith products that do not contain

Wood Refinement Required Chemical Wood Preservation & RefinementRequired

° Doussié

° Bangkirai

° Teak

° Basralocus

° Opepe

° Afzelia

moderatelydurable

lessdurable

° Australian Blackwood

° Bongossi

° Oak

° WesternRed Cedar

° Splio-Mahogany

° Dark RedMeranti

° AmericanWhite Oak

° Niangon

° Idigbo

° Oregon Pine

° Douglas Fir ( dependingon origin)

° Pine

° Larch

° Light RedMeranti

° Eucalyptus

° Spruce

° Fir

° AmericanRed Oak

° SouthernPine

° WesternHemlock

° Hemlock

° Beech

1 1–2 2 2–3 3 3–4 4 5

non-durable

durablevery

durable

Building elements subjected to weather require protectivetreatment with an approved wood preservative

biocidal ingredients. ‘Moderately’ to‘non-durable’ types require a chemi-cal wood preservative to protectthem from, e.g. blue stain and rot.But the classification of wood typesonly refers to the heartwood.Normally, commercially available

wood also contains sap wood whichis not generally durable. These typesof wood should not be used in out-door areas without a chemical woodpreservative.

STRUCTURAL WOOD PROTECTIONDon’t Give Moisture a Chance

Building elements should also beplaced so that contact with water isavoided if at all possible. If this is notpossible, it must be ensured that the

wood can dry again quickly. Woodbuilding elements should also beconstructed so that permanent wet-ting through standing water is avoid-

ed (sloped surfaces, rounded edges,covers on horizontal surfaces).

Protective treatment with a wood preservative is not necessary

Classification of the types of wood

9

Preliminary work

° Remove old coatings that do notadhere well

° Sand rough wood and old coat-ings – this improves the adhesionof the coating

° Brush off dust with a duster

° The wood must be clean and freeof wax and grease

° Cover the area with plastic sheetsand, if necessary, mask surround-ing areas with adhesive tape

° Remove resin galls with a fillingknife

° Wash off resin stains with a thin-ner

Tools

° High quality tools considerablyimprove results

° Natural bristle brushes should beused for solvent based coatingsand acrylic brushes for waterbased products

° Some of the Remmers productscan also be efficiently applied withhand-held spraying equipment

GENERAL NOTES ON WORKINGFor Coatings That Are Perfect

Directions

° All Remmers products should bestirred well before using to distributepigments and binders evenly

° All Remmers products are ready touse and do not need to be diluted

° Different shades of the same prod-uct can be intermixed but as a rule,different products should not beintermixed

° Non-resistant (soft) wood in outdoorareas should be impregnated with awood preservative before they areactually coated. When HK Stain or Wood Cream isused, this step is not necessary.These products provide comprehen-sive protection

° Always brush the products onto thewood in the direction of the grain

° After the coating has dried, coatagain

° Observe the application rates: Usinga lot does not necessarily help a lot.

Remmers premium products aredivided into five core product cate-gories.

Each of the product categories forprotecting and refining wood inindoor and outdoor areas have dif-ferent colours and easy to under-stand symbols for fast identificationof their range of use.

OVERVIEW OF PRODUCT CATEGORIES The Right Product for Every Area of Use

Long Time Stain UV

UV Weather ProtectionStain

Wood Preservative Primer

Wood Cream

Wood Preservative Creamclear

Stair & Parquet Varnish

Hard Wax Oil

Anti-Insect Plus

Stair & Parquet Fresh

Hard Wax Polish

Decorative Wax StainHK Stain

10

Wood PreservativeStain Outdoors


Teak Oil

Bangkirai Oil

Douglas Fir Oil

Larch Oil

Universal Oil

Maintenance Oil

Green Growth Remover

Compact Varnish PU

Compact Stain PU

UV Translucent Top

UV Opaque Top

Care Set for Windows

Care Set for Doors

Sealing Primer

Finishing Paint

All Primer

Color Varnish 2 in 1

11




12

Moisture Blue stain Rot Mould & algae UV-rays Gnawing wasps

6 XProtection

for wood outdoors

Wood Preservative StainOutdoors

HK STAINUnique, Premium Wood Preservative Stain That Also Primes

silver grey white* hemlock* rustic oak light oak

nutwood ebony teak fir green pine palisander

stone pine/larch mahogany chestnut salt green clear*

Deviations in colour are possible * Only for building elements in outdoor areas that are not directly exposed to weather

6 XProtectionfor wood outdoors

Tips & Important Information:

When you use HK Stain, an additional woodpreservative primer is not necessary. HKStain is a ‘2 in 1’ product and formulated withthe most comprehensive wood protection.

To achieve top, silk gloss surfaces, we rec-ommend an additional coat of Long TimeStain UV. Light-coloured translucent shadescan be kept permanently light by applying anadditional topcoat of Long Time Stain UV in‘clear UV+’.

Notes on Working:

The substrate must be clean and dry andcan be recoated without sanding or strip-ping.

Set up a trial area first to check the coloureffect on the respective wood substrate. Ifyou observe these tips, results will be per-fect!

Use wood preservatives safely. Alwaysread the label and product informationbefore using.

Range of use

HK Stain is used for treating non-load bearing wood in outdoor areaswhich is not in contact with theground.

° Carports° Roof eaves ° Framework° Facade facings ° Garden pavilions / arbours° Wood cabins ° Palisades / pergolas° Fences

Application rate:° 2.5 l are sufficient for coating

approx. 31 m2

° According to RAL Quality andTesting Provisions: 200 –250 ml/m2

Properties

° Breathing active and moisture reg-ulating

° Renovation coats possible withoutsanding or stripping

° Will not flake, penetrates deeply ° Water repelling° For use outdoors ° Solvent based° Translucent / silk matt° Built-in primer

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l° 2 x 5.0 l° 10.0 l° 20.0 l

Special colours

available on request 13

For useoutdoors

Solventbased

Translucent /silk matt

Built-inprimer

Stir well before using


14

Moisture Blue stain Rot Mould & algae UV-rays Gnawing wasps

6 XProtection

for wood outdoors

15

WOOD CREAMUnique Cream Stain – Just One Coat Required

Properties

° Comprehensive wood protectionwith just one coat

° Penetrates deeply and does notdrip

° For use outdoors° Solvent based° Translucent / silk matt° Built-in primer

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l° 2 x 5.0 l° 20.0 l

Range of use

For protection of wood without staticloads or ground contact in outdoorareas against blue stain & rot.

° Carports° Roof eaves ° Framework ° Facade facings ° Garden pavilions / arbours° Wood cabins ° Palisades / Pergolas° Fences


approx. 13 m2

° According to RAL Quality andTesting Provisions: 200 –250 ml/m2

3.2.1.

Appy justonce …

… allow toflow…

… done!

Deviations in colour are possible * Only for building elements in outdoor areas that re not directly exposed to weather ** As a premium wood preservative primer

silver grey white* light oak nutwood

mahogany clear*/**

teak pine palisander stone pine/larch


Wood Cream’s formulation protects againstblue stain & rot. The product is a real cream– not a gel stain. That’s why it can penetratedeeply and be applied in just one workingoperation on rough sawn wood. A secondworking operation may be necessary fordressed wood and hardwood,. WoodCream is simply applied with a brush usedfor solvent based stains.

Notes on Working:

Because of the cream consistency, it iswell suited for overhead work. There’s noneed to cover everything.


6 XProtectionfor wood outdoors

For useoutdoors

Solventbased

Translucent /matt

Does not drip /penetratesdeeply

Do not stir! Wood Preservative StainOutdoors

LONG TIME STAIN UVPermanent Weather Protection That Is Easy to Apply

Properties

° For all wood building elementssuch as facades, windows &doors

° Extreme UV protection: Extremely durable

° To keep light coloured wood per-manently light: Finish with clear UV+

° Clear UV+ for wood outdoors ° For use indoors and outdoors° Solvent based° Translucent / silk gloss° Drip inhibited


Range of use

° Exterior doors / house doors° Balcony railings ° Carports° Roof eaves ° Framework / sunrooms° Facade facings° Windows / shutters° Garden pavilions / garden

furniture° Wood cabins / arbours° Fences / pergolas

Application rate:° 2.5 l are sufficient for approx.

31 m2

° 1st coat: approx. 100 ml/m2

° 2nd coat: approx. 60 ml/m2

16 Deviations in colour are possible

silver grey white rustic oak light oak

nutwood ebony teak fir green

pine palisander stone pine/larch clear UV+

Special colours

available on request.


When used in a system with Wood Cream(clear), it is also suitable for areas directlyexposed to weather. To keep light colouredwood permanently light, Long Time StainUV (clear UV+) can also be used as a wearinglayer that is renewed when renovating. Thecolour then darkens much more slowly.

Surfaces that were coated before with LongTime Stain can be coated over with LongTime Stain UV without any problem.

Notes on Working:

Ideal for achieving an especially highquality silk gloss on substrates that werepre-treated with HK Stain.

Especially good results are achieved ifintermediate sanding is carried out beforefinishing with Long Time Stain UV.

UV+for wood outdoors

clear

WITH AN IMPROVED

FORMULATION

For useindoors &outdoors

Solventbased

Translucent /silk gloss

Dripinhibited

Stir wellbefore using Wood Preservative Stain

Outdoors

17

° Especially high UV protec-tion thanks to pigmenta-tion

° Renovation intervals arepractically independent ofthe shade of colour

° Especially high UV protec-tion thanks to pigmenta-tion

° The shade of colour dark-ens much more slowly

° Renovate with ‘clear UV+’

° Natural look ° Original shade of the wood

is maintained

Pre-treatment

HK Stain or Wood Cream ‘pigmented’

Pre-treatment

HK Stain or Wood Cream ‘pigmented’

Pre-treatment

Wood Cream‘clear’

is required

1st coat

Long Time Stain UV‘pigmented’

1st coat

Long Time Stain UV‘pigmented’

1st coat

Long Time Stain UV‘clear UV+’

–2nd coat


2nd coat


Classicshades of stains

Classicshades of stainswithout darkening

Clear UV+for use outdoors

Much more than just a stain

When combined with Wood Creamclear, Long Time Stain UV achievesundreamt-of results when it comesto permanent brilliance and protec-

tion of wood outdoors – and now forclear applications as well.

Clear UV protection

Three wood surface samples arecompared after many years ofweathering.

Long Time Stain UV, clear UV+

Result: Perfect surface thanks to UV blockers

Conventional clear stain without UV protection

Result: Irrepairable greying

and/or blue stain

Untreated surface

Result: The entire surface of the wood has

turned grey


18

UV WEATHER PROTECTION STAIN Water Based, Gel Stain with a UV Blocker

Properties

° For all wood building elements,e.g. facades, windows & doors

° Extreme UV protection: Extremely durable

° To keep wood permanently light:Apply a topcoat of clear UV+

° Clear UV+ for wood outdoors° For use indoors and outdoors ° Water based° Silk gloss ° Drip inhibited

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l° 2 x 5.0 l

Range of use

° Exterior doors / house doors° Carports° Roof eaves° Framework / sunrooms° Facade facings ° Windows / shutters° Garden pavilions / garden

furniture° Wood cabins / arbours° Fences / pergolas

Application rate:° 2.5 l are sufficient for approx.

25 m2

° Wood colours: 2x100 ml/m2

° Clear UV+: 3x100 ml/m2


When used in a system with Wood Cream(clear), it can also be used in areas that aredirectly weathered. To keep light-colouredwood permanently light, UV WeatherProtection Stain (clear UV+) can also beused as a wearing layer that is renewedwhen renovating. The desired colour dark-ens much more slowly.

Notes on Working:

Due to the consistency of the product, itis highly suitable for overhead work.There’s no need to cover everything.

silver grey white light oak nutwood

teak pine stone pine/larch mahogany

walnut clear UV+

Deviations in colour are possible

Special colours



Clear

For useindoors andoutdoors

Waterbased


Drip inhibited

Stir wellbefore using


Clear


19

Much more than just a stain

When combined with Wood Creamclear, UV Weather Protection Stainachieved undreamt-of results when itcomes to permanent brilliance and

protection of wood outdoors – andthat also now in clear for outdoorapplications.

Clear UV protection

A comparison of three samples ofwood surfaces after weathering forseveral years.

UV Weather Protection Stain, clear UV+

Result: A perfect surface thanks to UV

blockers

Conventional clear stain without UV protection

Result: Irrepairable greying and/or blue stain

Untreated surface

Result: The whole surface of the wood has

turned grey

° Brilliant stain surface° Especially high UV protec-

tion ° Renovation intervals are

practically independent ofthe shade of colour

° Brilliant stain surfaces witha clear ‘wearing layer’

° The shade of the staindarkens much moreslowly

° Recoating with ‘clear UV+’is possible

°Natural look °Original shade of colour is

maintained°Especially effective against

blue stain; protection againstfungi that discolor wood withWood Cream clear

Impregnation


Impregnation


Impregnation


1st coat

UV Weather Protection Stain ‘coloured’

1st coat


1st coat

UV Weather Protection Stain ‘clear UV+’

2nd coat


2nd coat


2nd coat


–3rd coat


3rd coat


Brilliant stain surfaces

Lightstain surfaces

Clear UV+ for outdoors


20

WOOD PRESERVATIVE CLEARPremium Wood Preservative Primer for Softwood

Properties

° Protection against blue stain & rotin one working operation

° System primer for UV WeatherProtection Stain & Long Time StainUV

° When weathered indirectly, also asthe sole protection

° For e.g. spruce, fir & pine° Penetrates deeply ° Long-term protection against blue

stain & rot ° Adhesive primer for many

coatings ° For use outdoors° Solvent based


Range of use

Premium wood preservative impreg-nation agent & system primer for UVWeather Protection Stain & Long TimeStain UV. When weathered indirectly,also as the sole protection.

° Exterior doors / house doors° Balcony railings° Carports° Roof eaves° Framework ° Facade facings° Windows / shutters° Garden furniture° Wood cabins° Arbours ° Sun rooms ° Fences / pergolas


approx. 13 m2

° According to RAL Quality and TestProvisions: 200 –250 ml/m2

EASY TO WORK

OVERHEAD

clear


Notes on working:

Use wood preservatives safely. Alwaysread the label and pro duct informationbefore using.

For useoutdoors

Solventbased

Translucent/ matt

Does not drip /penetrates deeply

Do not stir!Wood Preservative StainOutdoors

21

WOOD PRESERVATIVE PRIMERImpregnation Agent for Preventive Protection against Blue Stain and Rot

Properties

° For e.g. spruce, fir & pine° Penetrates deeply ° Long-term protection against blue

stain & rot ° Adhesive primer for many

coatings ° For use outdoors° Solvent based


Range of use

° Exterior doors / house doors° Balcony railings° Carports° Roof eaves° Framework ° Facade facings° Windows / shutters° Garden furniture° Wood houses ° Arbours° Sun rooms° Fences / pergolas


approx. 36 m2

° Effective against blue stain and rotwith an application rate of: 140 - 160 ml/m2


clear

Notes on working:


For useoutdoors

Solventbased

ClearStir wellbefore using


22


23

DECORATIVE WAX STAINWax Stain for Treating Wood Surfaces in Indoor Areas

Properties

° Universal for wood in living spaces ° Colour giving primer for wood

floors (subsequent sealing withHard Wax Oil or Stair and ParquetVarnish is required)

° Very good resistance to water:also for damp rooms (bath,kitchen)

° Contains natural raw materials:linseed oil, natural resin &beeswax

° Resistant to household chemicals ° Looks beautiful with just one coat ° Water based° Translucent / matt

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l° 10.0 l

Range of use

° Ceiling panels ° Wood floors (as a primer)° Wood in damp rooms (bath &

kitchen) ° Wood toys° Interior doors° Furniture made of wood° Wall panels

Application rate:° 2.5 l are sufficient for treating

approx. 25 m2

° 2 x 50 –100 ml/m2

antique grey toscana grey

oak cherry mocca clear

beechwhite


Decorative Wax Stain can be applied in anespecially thin layer with a soft linen cloth.Relatively little material is absorbed by thesurface and the wood fibres have less ten-dency to stand upright and make the surfacelook rough. If the surface is still too roughafter drying, smooth with fine sandpaper andapply another coat of Decorative Wax Stain.

Versatile Possibilities for Use

As special as the use of Decorative Wax Stainis in indoor areas, the possibilities for use areuniversal. Treated surfaces of furniture, pan-els and wall facings look matt and feel likevelvet when touched, seeming especially nat-ural. Even the colour design of wet roomareas (kitchen & bath) can be integrated. Thestain’s hydrophobizing properties also pro-vide an outstanding water repelling effect.

This high quality, ecological product can alsobe used on floors as a colour giving primer(thin with 25 % water!). Afterward, the flooris sealed with Hard Wax Oil or Stair &Parquet Varnish.


WOOD REFINEMENT BASED ON

RENEWABLE RAW MATERIALS

For useindoors

Waterbased

Translucent /matt

Colour givingprimer forfloors



24

STAIR & PARQUET VARNISHFor Especially Robust and Hard-Wearing Wood Surfaces

Properties

° Also for furniture, tables & doors ° Abrasion & scratch resistant° Resistant to chemicals according

to DIN 68861, part 1 1C° Water based° Clear / silk gloss

or silk matt

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l

Range of use

° Wood floors° Wood toys° Interior doors ° Cork floors° Furniture made of wood ° Parquet° Stairs made of wood


approx. 23 m2

° 100 –120 ml/m2 per working oper-ation when applied with a roller

clear silk mattclear silk gloss


For regular maintenance of stairs and par-quet floors, we recommend adding Stair &Parquet Fresh to the mop water. Would you like the surface to have a special,coloured accent? Then just prime withDecorative Wax Stain in the desired shade ofcolour before applying Stair & ParquetVarnish!

Protection for Wood That Takes aBeating:

Dirt and mechanical loads can take a heavytoll on wood surfaces. Parquet floors andstairs especially need a special protectivecoating. These surfaces are trodden on day inand day out. Coating with Stair & ParquetVarnish not only brings out the beauty of thewood, it also maintains its attractiveness andstability for a long time.

Notes on Working:

Stair & Parquet Varnish can be applied bybrush, roller or sprayed on.


For useindoors

Waterbased



25

STAIR & PARQUET FRESH Water Based Floor Care Product for Sealed Surfaces

Properties

° Just one product for initial care &regular maintenance

° Refreshes surface protection ° Slip resistant ° Repells dust & dirt° Water based ° Clear / silk gloss

Container sizes / sales unit:° 6 x 1.0 l

Range of use

° Wood floors° Cork floors ° Cork (closed / varnished)° Synthetic resin floors° Laminate° Linoleum° Parquet° Wood stairs

Application rate:° 1.0 l is sufficient for initial care of

approx. 25 - 30 m2

° For maintenance: 200 ml/10.0 lmop water

clear


For initial care, Stair & Parquet Fresh isapplied undiluted to the varnished surfacewhich also closes fine cracks. When usedregularly (just add to the mop water), sur-faces are cleaned and maintained at thesame time.

To care for oiled surfaces in interior areas,we recommend the use of Hard Wax Polish.


For useindoors

Waterbased

Shines byitself withoutpolishing

Simply add to themop water


26

HARD WAX OIL For Wood and Cork Floors As Well As Wooden Furniture That Takes a Beating

Properties

° Natural looking, matt surface° Resistant to chemicals according

to DIN 68861, part 1 1C° Retreatment without any transi-

tions ° Solvent based ° Clear / silk matt

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l° 20.0 l

Range of Use

Based on natural oils with lead-freedry solids. Efficient and time savingapplication.

° Wood floors° Interior doors° Cork floors ° Wood furniture° Parquet° Wood stairs


approx. 83 m2

° 10 - 50 ml/m2, depending onabsorbency, per working opera-tion

clear


Special colours



Textiles soiled with Hard Wax Oil (e.g. ragsused for application, working clothes) havea tendency to self-ignite: Please moistenthese textiles with water and hang outdoorsto dry! For regular maintenance, we recom-mend adding Hard Wax Polish to the mopwater. Would you like the surface to have aspecial, coloured accent? Simply prime thesurface with Decorative Wax Stain in thedesired colour before treating with HardWax Oil!

Optimum Preservation

Wood makes you feel good like practicallyno other material. That’s because of thebeauty of this natural material and its posi-tive physical properties. To preserve itscomfortable properties, it needs propercare.

Hard Wax Oil is the ideal treatment to per-manently protect expensive wood. It can beused on all flooring materials made of woodand cork and protects the substrate perma-nently. The wood’s beauty is enhanced overthe years and it remains beautiful and easyto maintain.

Notes on Working:

Surfaces can be retreated, even in partialareas, without any preliminary work.

For useindoors

Clear /silk matt

Also for cork


Solventbased


27

HARD WAX POLISHCare Product for Oiled and Waxed Wood Floors

Properties

° Based on natural raw materials ° For initial care & maintenance° Refreshes surface protection ° Water based° Clear / silk matt

Container sizes / sales unit:° 6 x 1.0 l

Range of use

° Wood floors° Cork floors ° Parquet° Wood stairs

Application rate:° 1.0 l is sufficient for initial care of

approx. 10 –20 m2

° Maintenance: 200 ml/10.0 l mopwater

clear



For initial care, Hard Wax Polish is appliedundiluted to surfaces treated with Hard WaxOil. When used regularly, the surfaces arecleaned and maintained at the same time.

To care for sealed surfaces in interior areas,we recommend the use of Stair & ParquetFresh.

For useindoors

Waterbased

Simply add to themop water


28

29

Target group for moultinginhibitors

Target group for neurotoxins (e.g. pyrethro ids)

Animal species in total

Protozoon

Zoophytes

Annelids

Crustaceans

Arthrop

ods

Spiders

Insects

Moluscs

Flatworms

Nemathelminths

Ectproctas

Echinoderms

Tunicates

Bony fish

Amphibians

Reptiles

Birds

Mammals

ANTI-INSECT PLUSControlling Wood Preservative for Furniture and Antiques

Properties

° Controls woodworms° Selective effect against insects ° Permanently prevents reinfestation ° Solvent based

Selective effect:° Active ingredient: Flufenoxuron, a

moulting inhibitor, is much moreselective than conventional prod-ucts for controlling insects, e.g.pyrethroids

° Flufenoxuron interferes inprocesses that do not take placein humans and vertebrates


Range of use

° Roof structures ° Ceiling panels ° Wood furniture ° For controlling insects


approx. 7.5 m2

° At least 300 ml/m2 developedwood surface

Clear



Large-surface applications, e.g. in roofstructure areas, should be carried out byprofessionals certified for using wood pre-servatives and not by laymen.

Notes on Working:

Use wood preservatives responsibly andsafely. Always read the label and productinformation before using.

For useindoors

Solventbased


30


31

UV TRANSLUCENT TOP Solvent Based, Thick-Layer, Translucent Coating for Dimensionally Stable Building Elements

Properties

° Drip inhibited ° Good flow° Long-term protection ° For use indoors and outdoors ° Solvent based° Translucent / silk gloss° With a UV blocker


Range of Use

For coloured and decorative treat-ment of wood and especially fordimensionally stable wood buildingelements.

° Exterior doors° House doors° Windows ° Garden furniture° Interior doors° Sunrooms


approx 28 m2

° 1st coat: 80–120 ml/m2

° 2nd coat: 60–100 ml/m2

light oak nutwood teak pine

palisander afromosia clear*

Deviations in colour are possible * ‘clear’ does not provide sufficient UV protection for building elements directly exposed to weather. If you want a ‘clear’coating, we recommend coating with Long Time Stain UV in ‘clear UV+’ instead.

Special colours



Remmers is the leader in Europe when itcomes to top quality, industrial windowcoatings. UV Translucent Top is optimallyadapted to the spraying qualities in this lineof products and thus extremely suitable forrenovation coats.

Thick-Layer Translucent Coating on anAlkyd Resin Base

Windows and doors made of wood areespecially expensive. Important here is notonly their attractive appearance; thesebuilding elements must also function prop-erly. UV Translucent Top is so thick that justone coat produces a protective layer thatwill last for many years. Its gel-like consis-tency makes it pleasant to apply and drip-ping and splashing are avoided. UVTranslucent Top was designed to meet thehighest requirements.

Notes on Working:

Because of the consistency of the prod-uct, it is especially suitable for overheadwork. It’s not necessary to cover every-thing.

Solventbased

With UV blocker





COMPACT VARNISH PUWater Based, Opaque, PU-Acrylic Varnish

Properties

° Very good hiding power° Good flow properties° Long-term protection ° For use indoors and outdoors ° Water based° Opaque / silk gloss

Container size / sales unit:° 6 x 0.75 l° 2 x 2.5 l

Range of use

High quality intermediate and finis-hing coat for primed, dimensionallystable wood building elements andelements with limited dimensionalstability:

° Exterior doors / house doors° Facade facings ° Windows° Interior doors° Sunrooms


approx. 25 m2

° Approx. 100 ml/m2 per coat

32


To prevent coloured substances in thewood from bleeding through the coating, atleast 2 coats of Sealing Primer should beapplied to hardwood and resin-rich types ofwood as an intermediate coating. Coatlarge surfaces in sections; do not try to coatlarge surfaces all at once.

Notes on Working:

Do not use in strong sunlight or at tem-peratures below 15°C or in high humidity.

Oak contains substances that bleedthrough, causing dark stains on waterdilutable dispersion coatings.

Trial coatings are recommended, also onother species of wood.

white


Special colours



Waterbased

Opaque /silk gloss



33

COMPACT STAIN PUWater Based, PU-Acrylic, Thick-Layer Stain with a UV Blocker

Range of Use

High quality intermediate and finish-ing coating for primed, dimensionallystable wood building elements (e.g.windows & house doors) and highquality wood building elements withlimited dimensional stability.

° Exterior doors° House doors° Facade facings° Windows° Interior doors° Sunrooms


approx. 25 m2

° Approx. 100 ml/m2 per coat

Properties

° Good flow° Long-term protection ° For use indoors and outdoors ° Water based° Translucent / silk gloss° With a UV blocker

Container size / sales unit:° 6 x 0.75 l° 2 x 2.5 l

Deviations in colour are possible * ‘clear’ does not provide sufficient UV protection for building elements directly exposed to weather. If you want a ‘clear’coating, we recommend coating with Long Time Stain UV in ‘clear UV+’ instead.


Coat large surfaces in sections; do not try tocoat large surfaces all at once. Oak con-tains substances that may bleed throughwater dilutable dispersion coatings, causingdark stains. Trial coatings are recommend-ed, also for other species of wood.

Notes on Working:

Do not apply Compact Stain PU in strongdirect sunlight or at temperatures below15°C or in high humidity.

ebony teak fir green pine

mahogany palisander afromosia clear*

Special colours



Waterbased

With a UV blocker




34

UV OPAQUE TOPSolvent Based Finish – Guaranteed to Stay White

Properties

° High solid content & high hidingpower

° Primer, intermediate coat & finish° Good flow° Long-term protection ° For use indoors and outdoors ° Solvent based° Opaque / silk gloss


Range of use

Especially for dimensionally stablewood building elements such as win-dows and doors. Also for wood fac-ings in indoor and outdoor areas. Forsoft wood as well as hardwood.

° Exterior doors° House doors° Windows ° Garden furniture ° Interior doors ° Sunrooms ° Fences


approx. 42 m2

° 50–75 ml/m2 per coat

white


Special colours



UV Opaque Top is used as a primer andintermediate coat as well. With this so-called ‘one pot product’, an additionalwood preservative, e.g Wood PreservativePrimer, is only needed for non-resistanttypes of wood.

Perfect Renovation – from Bottom toTop:

After years of weathering and when mainte-nance measures have not been carried out,windows, doors and other wood construc-tion elements are often so damaged thatnot just the surface coating but even thesubstrate has clearly lost substance. It isthen high time to thoroughly renovate win-dows and doors. With UV Opaque Top, theprimer, intermediate and finishing coat allcome out of one can.The coating’s espe-cially high and permanent degree of whiteguarantees a brilliant appearance for manyyears and the weather resistance and elas-ticity of the coating guarantee a long serv-ice life.

Notes on Working:

Apply UV Opaque Top in thin layers.Thicker layers considerably delay dryingtime.

For good results, the substrate must beclean, dry and free of grease and salt.


Goodhidingpower

Opaque /silk gloss


Solventbased


35

CARE SETS FOR WINDOWS & DOORS For Cleaning and Maintaining Windows & Doors Coated with Varnishes and Stains

Properties

° Maintains the value of these ele-ments

° Extends renovation intervals ° Closes micro-cracks (e.g. resulting

from the impact of hail) in thecoating

° For use indoors and outdoors ° Water based° Silk gloss

Components:° 250 ml Cleaner° 250 ml Care Balsam

for windows or doors ° 2 special, non-fraying cloths for

applying to the surface

Range of use

Especially for dimensionally stablewood building elements such as win-dows and doors.

° Exterior doors° House doors ° Windows ° Sunrooms

Application:° Set is sufficient for treating

approx. 25 m2

A dent from hail after one year of weathering

with Care Balsam: intact surface

A dent from hail after one year of weathering

without Care Balsam: blue stain


Care Balsam for Windows gives wood win-dows, which are often highly exposed toweather, maximum protection. House doorsare often better protected from weatherthrough structural means and what isimportant here is uniform and streak-freeapplication. Care Balsam for Doors is partic-ularly suitable for uniform application onlarge surfaces.

fFor useindoors &outdoors

Streak-free application tolarge surfaces


36


WITHOUT Sealing

Primer, the surface

yellows

WITH Sealing

Primer, the surface

stays bright white

37

SEALING PRIMERWater Based, Special Coating for Light-Coloured Finishing Paints and Lacquers

Properties

° Prevents yellowing ° Weather resistant and

moisture regulating° Dries quickly ° Water based° Highly opaque / matt


Range of use

° Old coatings (load-bearing)° Balcony railings ° Carports° Roof eaves ° Ceiling panels ° Facade facings° Windows / shutters° Arbours ° Palisades / pergolas° Doors ° Wall panels ° Fences / screen walls


approx. 33 m2

° As a primer: 2 x 70–80 ml/m2

° As a finish: 3 x 70–80 ml/m2


Sealing Primer does not replace a wood preser-vative impregnation agent! For species of woodthat are not sufficiently resistant (particularlysoftwood) that are used outdoors, we recom-mend impregnation first with Remmers WoodPreservative Primer before applying SealingPrimer.

Notes on Working:

The best possible sealing effect is achievedwhen Sealing Primer is applied in two thinlayers, allowing to dry for at least 4 hoursbefore applying the next coat.

The first layer binds water soluble sub-stances in the wood. The second layereffectively seals these off.

white



Waterbased


Opaque /matt


38

FINISHING PAINTHigh Opaque, Weather Protection Paint for Wood and Other Substrates

Properties

° Extremely resistant to weather ° Driving rain tight ° Highly opaque and highly elastic ° Fully breathable, has a mild odour ° Dries quickly ° Water based° Opaque / silk matt

Container sizes / sales unit:° 6 x 0.75 l° 2 x 2.5 l° 2 x 5.0 l° 10.0 l° 20.0 l

Range of use

° Old coatings (load-bearing)° Balcony railings° Carports / arbours° Roof eaves ° Facade facings ° Shutters ° Masonry / render / fibratedcement° Palisades / pergolas° Wall and ceiling panels ° Fences / screen walls° Zinc / zinc sheet / galvanised steel


approx 25 m2

° 2 x 100 ml/m2

° When pre-treated with SealingPrimer (for light-coloured shades):1 x 100 ml/m2

Deviations in colour are possible * Remmers’ own shade of colour


When using the colour white and all otherlight shades, always treat with SealingPrimer first to reduce water soluble sub-stances in the wood from ‘bleeding’ throughthe coating. This keeps the coating ‘brightwhite’.

Notes on Working:

Finishing Paint can be applied by brush,roller or sprayed. On highly absorbentsubstrates, dilute the first coat with 10 %water. Keep containers tightly closed.Store cool and dry.

white gold yellow corn yellow Swedish red reddish brown

tobacco brown bottle green royal blue Frisian blue

light grey dark grey black

Special colours


moss green*

light ivory RAL 1015

nut brown*RAL 8011


Waterbased

Opaque /silk matt



39

SUGGESTIONS FOR ATTRACTIVE COLOURSThere’s No Limit to Creativity

Mixing Attractive Colours

There are no limits to creativity. Themixed shades of colours shown herecan be easily produced by mixingwhole cans. No measuring or weigh-ing necessary. Just pour the contentsof the specified size cans into a con-tainer large enough and mix thor-oughly by stirring.

oreganoroyal blue + moss green (1:1)

summer greenbottle green (0.75 l)+ gold yellow (2.5 l)

currycorn yellow + gold yellow (1:1)

pinkwhite (2.5 l) +Swedish red (0.75 l)

champagnelight ivory (0.75 l) +white (5 l)

mintwhite (2.5 l) + bottle green (0,75 l)

Caribbean yellowwhite + gold yellow (1:1)

enzianFrisian blue + royal blue (1:1)

arctic bluedark grey + Frisian blue (1:1)

Pacific blueroyal blue (0.75 l) +white (5 l)

chilliSwedish red + reddish brown (1:1)

poppywhite (0,75 l) + Swedish red (5 l)

blood redgold yellow + Swedish red (1:1)

tangerineSwedish red (0.75 l)+ gold yellow (5 l)

datewhite (0.75 l) + black(25 l)

egg plantFrisian blue Swedish red (1:1)

artichokewhite (5 l) + reddish brown (2.5 l)

mushroomnut brown (0.75 l) + white (5 l)



Detachment Good adhesion

No rust protection Good rust protection

Water soluble sub-

stances bleed

through

No discoloration

Properties

° Prevents yellowing ° Dries quickly ° For metals, PVC and wood° Protects against rust ° Seals off substances in the wood ° Water based° Opaque


Range of use

Used as an adhesion promotingprimer on problematical substrates –with the exception of anodised alu-minium and freshly hot-dip gal-vanised steel.

° Aluminium (pure)° Old coatings (load-bearing)° Wood constructions° Copper° Brass° PVC (rigid)° Steel° Zinc° Zinc sheet° Galvanised steel


approx. 28 m2

° 80–100 ml/m2 depending on thick-ness of the layer

40

ALL PRIMERAdhesion Promoting Primer for Problematical Substrates

WITHOUT All Primer: WITH All Primer:



Surfaces primed with All Primer can be fin-ished with Remmers products, e.g.Compact Varnish PU, Color Varnish 2 in 1,UV Opaque Top, Finishing Paint and RofalinAcrylic, etc.

Notes on Working:

The substrate must be free of grease,soot, dirt, dust, corrosion and old coat-ings that do not adhere well and anyother substances that could interfere withadhesion.

Thorough pre-treatment of the substrate isdecisive for sound adhesion of the subse-quently applied coating.

greyreddish brownwhite


Waterbased

Dries quickly

OpaqueStir wellbefore using


41

COLOR VARNISH 2 IN 1Rust Protection Primer and High Gloss Varnish in One

Properties

° Primer and coloured varnish in one ° With integrated rust protection ° High hiding power° High solid content ° Smooth application ° Impact and scratch resistant ° Good resistance to weather and

UV-rays ° Resistant to heat and little tendency

to yellow ° Opaque / high gloss


Range of use

This primer is especially suitable fortreating blank or slightly rusted ferrousmetals in indoor and outdoor areas aswell as primed or load-bearing oldcoatings on wood surfaces.

° Old coatings (load bearing)° Directly on rust° Ferrous metals (slightly rusted)° Windows° Garden furniture° Radiators° Wood constructions / substrates ° Steel° Doors

Application rate:° 2.5 l are sufficient for approx. 28 m2

° 80 ml/m2 depending on thickness oflayer



Color Varnish 2 in 1 can be applied by brush,roller or sprayed. When used as a rust pro-tection coating, apply at least two coats ofColor Varnish 2 in 1.

Notes on Working:

Apply Color Varnish 2 in 1 in thin layers. Thicker layers can delay drying consider-ably.

To achieve the best results, the substratemust be clean, dry and free of grease andsalt.

pure whiteRAL 9010

rape seed yellowRAL 1021

fire redRAL 3000

nut brownRAL 8011

moss greenRAL 6005

leaf greenRAL 6002

light greyRAL 7035

white aluminiumRAL 9006

silver greyRAL 7001

jet blackRAL 9005

Special colours


enzian blueRAL 5010

cream whiteRAL 9001

chocolate brownRAL 8017

Solventbased



Opaque /high gloss

Goodhidingpower


42


43

MAINTENANCE OILSolvent Based Maintenance Oil for Garden Furniture and Wood Decks

Properties

° Pleasant working properties ° Nice emphasis of the grain of the

wood ° Protects wood from drying out ° Prevents wood from turning grey

(only pigmented versions, notclear)

° Colours coordinated to teak,bangkirai and larch

° Water repelling° Solvent based° Penetrates deeply ° Translucent / matt


Range of use

Used to treat high grade timber inindoor & outdoor areas such as gar-dens, sunrooms and living spaces.

° Acetylated wood° Bridges ° Garden furniture ° Wood decks / terraces° Massaranduba / Ipé° Furniture (sunrooms

& living areas)° Thermally treated wood ° WPC (wood decks & fences)


approx 25 m2

° Apply 2 coats, each approx. 100 ml/m2

CLASSIC SOLVENT BASED PRODUCT:

ALSO FOR WPC & MASSARANDUBA


Since bangkirai from sustainable, certifiedcultivation is becoming more and morescarce, Douglas fir, larch and, most recent-ly, thermally treated wood and WPC (woodplastic composites) are being offered forterrace decks. Maintenance Oil is perfectfor refining all of these substrates. However,a general statement on the resistance ofthese types of wood against insects cannotbe made and in case of doubt, the use of ablue stain inhibiting impregnation agentsuch as Wood Preservative Primer may berequired.

Notes on Working:

We recommend impregnating softwoodfirst with Wood Preservative Primer.

Stir the product well before using, alsoduring work and after pauses.

Apply two coats of undilutedMaintenance Oil in the direction of thegrain with a brush. After approx. 30 - 60minutes, distribute material that has notyet been absorbed with a dry brush.

Deviations in colour are possible * clear does not provide effective protection against turning grey over the long-term.

teak bangkirai larch

clear*

Special colours


Solventbased

°C Also for WPC& thermallytreated wood



Translucent /silk matt


44

GARDEN WOOD OILS

LASTS 3x LONGERTHAN CONVENTIONAL OILS

45

GARDEN WOOD OILSWater Based, Long-Term Protection for Wood Decks and Garden Furniture

Properties

° Can be recoated after 3 hours° Lasts 3x longer than conventional

oils ° High UV protection prevents grey-

ing ° Contains a film preservative to

protect against green growth ° Mild odour° For use outdoors ° Water based° Translucent / silk matt

Container sizes / sales units:° 6 x 0.75 l° 2 x 2.5 l° 2 x 5.0 l

Range of use

° Acetylated wood ° Bridges° Facade facings° Garden furniture ° Wood decks° Thermally treated wood ° Fences

Application rate:° Hard wood:

2.5 l are sufficient for coatingapprox. 42 m2

1st coat: 60 –80 ml/m2

2nd coat: 40 –60 ml/m2

° Softwood:2.5 l are sufficient for coatingapprox. 31 m2

1st coat: 80 –100 ml/m2

2nd coat: 60 –80 ml/m2


Not suitable for Massaranduba, Ipé andWPC. For these substrates, we recommendtreatment with Maintenance Oil. GardenWood Oils can be mixed with each otherwithout any problem but should not bemixed with other oils (e.g. Maintenance Oil).Garden furniture and decks made of hard,high grade timber should be allowed to dryespecially thoroughly before they areutilised. When Universal Oil (clear) is used,renovation intervals will be shorter com-pared to pigmented versions.

Notes on Working: We recommend impregnating softwood

first with Wood Preservative Primer. Apply undiluted in a thin layer with an

acrylic brush for water based products inthe direction of the grain. Do not exceed thespecified application rate (max. two work-ing operations).

Universal Oil: Three coats are recom-mended for softwood.

Highly absorbent end grain surfaces shouldbe coated twice with Garden Wood Oil.

New deck boards should be treated on allsides, if possible.

Wash off resin-rich and fatty wood suchas larch and teak with V 101 Thinner.

Working temperature 10 – 25°C. Lowertemperatures may have a negative effecton curing / anchorage to the substrate.

Deviations in colour are possible * Only for Universal Oil

Teak Oil Bangkirai Oil Douglas Fir Oil

Universal oil (clear)Larch Oil

Special colours


For useoutdoors

Waterbased

Can be coatedover after 3hours


Translucent /matt


46

47

GREEN GROWTH REMOVERFor Wood, Concrete, Clinker & Natural Stone

Properties

° Cleans by itself; does not need tobe rinsed off

° High yielding concentrate ° Compatible with the environment:

No active chlorine ° For use outdoors° Water based


Range of use

° Concrete° Bridges° Roof tiles° Facade facings° Garden furniture° Wood decks° Clinker° Masony ° Massaranduba° Natural stone° Thermally treated wood° Walk way paving ° WPC (wood decks & fences)° Fences


approx. 25 m2

° Approx. 100 ml/m2 (concentrate)° Mixing ratio: 1 : 5 with water


Our high yielding Green Growth Remover isself-acting, does not need to be washed offand is easily applied with hand sprayingequipment or a spouted bucket. If a deco-rative coating is to be subsequently appliedto the cleaned wood surface, the materialmust be rinsed off with water after an actiontime of at least 24 hours!

Surface of the wood BEFORE treatment with

Green Grown Remover

Surface of the wood AFTER treatment with

Green Growth Remover

For useoutdoors

Waterbased

Concentrate: Mix1:5 with water


48

TESTED SAFETYTest Marks That Guarantee the Quality of Remmers Products

Hard Wax Oil received a ‘very good’rating from Öko-Test. We are espe-cially proud of this – a good numberof natural paint producers did notreceive this award.

Our products are synonymous withthe best quality, highest precision andare 100 % our own developments –the reason they have the ‘Made inGermany’ mark.

Remmers wood preservatives bear thewell-known RAL mark of quality forwood preservatives. This mark con-firms the high effectiveness andsafeness of the products if usedproperly.

Many water based products bear the‘Blue Angel’ mark awarded by theGerman Federal Office of theEnvironment

Many of Remmers Products aretested according to the standard DINEN 71-3 ‘Safety for toys’.

Finishing Paint and Garden WoodOils were awarded the ‘Selbst ist der Mann’ mark by the editors ofthe same named magazine.

49

RENOVATION INTERVALSDepending on Weathering and Product

Note: Maintenance intervals – especially for translucent coatings – also depend on their location (north, south, east,west) and the shade of colour used (light shades of colours have shorter maintenance intervals)

Indirect weathering Normal, directweathering

Extreme, directweathering

Shades of colour: Clear, white and hemlock

HK Stain, Wood Cream, UVTranslucent Top, CompactStain PU & Maintenance Oil

The building elements are pro-tected from precipitation anddirect sunlight (e.g. roof eaves)

Rain and sun can act directlyon the wood elements (e.g.wood facades)

Building elements are subject-ed to strong driving rain andextreme climatic loads

5 years

5 years

8–10 years

1 year

1 year

2–3 years

< 1 year

< 1 year

1–2 years

Maintenance Oil

Universal Oil clear

HK Stain

Garden Wood Oils

Wood Cream

9–11 years

10–12 years

12–15 years

3–4 years

4–5 years

5–8 years

2–3 years

2–3 years

4–5 years

HK Stain &Long Time Stain

UV Translucent Top

Compact Stain PU

UV Weather Protection Stain

UV Opaque Top

Compact Varnish PU

Finishing Paint

Product

Wood Cream clear & UV Weather Protection Stain ‘clear UV+’

Wood Cream clear & Long Time Stain UV ‘clear UV+’

50

FIND.FIX.MATRIX FOR OUTDOOR AREASYour System Guide for Perfect Weather Protection

translucent

silk gloss water based**

solvent based

water based**

water based**

opaque

matt

silk gloss

silk gloss, medium anddark shades of colour

silk gloss, white and light shades of colour

solvent based

Building element Look Desired surface Product base / note

silk gloss water based**clear

translucent

opaque

clear

1x Wood Cream clear2x UV Weather Protection Stain coloured1x UV Weather Protection Stain clear UV+**

2–3x HK Stain/1–2 x Wood Cream

1x Wood Preservative Primer2x Sealing Primer 1x Finishing Paint

1x Wood Preservative Primer2x Finishing Paint

solvent basedoiled 2x Maintenance Oil

water basedoiled2x Garden Wood Oils/3 x Universal Oil clear****

water basedoiled2x Garden Wood Oils/3 x Universal Oil clear****

solvent basedsilk gloss 2x Long Time Stain

water basedsilk gloss2x UV Weather Protection Stain coloured1x UV Weather Protection Stain clear UV+***

water basedsilk gloss 3x UV Weather Protection Stain clear UV+

solvent basedsilk gloss 3x UV Opaque Top

solvent basedhigh gloss 2x Color Varnish 2 in 1

2x HK Stain/1x Wood Cream1x Long Time Stain UV1x Long Time Stain UV clear UV+***

Work steps

1x Wood Cream clear3x UV Weather Protection Stain clear UV+

° Facade facings

° Window shutters

° Balcony railings

° Roof eaves

° High quality fences

° Palisades

° Pergolas

° Arbours

° Carports

° Screen walls

translucent

solvent basedoiled 2x Maintenance Oil° Wood decks

° Bridges

° Foot bridgesmade of resistanthardwoods*

translucent solvent basedoiled 2x Maintenance Oil° Wood decks madeof massaranduba,Ipé or WPC

° Garden furniture made of resistanthardwoods*

51

translucent

solvent based

water based*

opaque

silk gloss

silk gloss

silk gloss, white and lightshades of colours

water based*

1x HK Stain3x UV Translucent Top

solvent basedsilk gloss1x Wood Preservative Primer3x UV Opaque Top

solvent basedhigh gloss1x Wood Preservative Primer2x Color Varnish 2 in 1

water based*silk gloss, medium anddark shades of colours

1x Wood Preservative Primer3x Compact Varnish PU

1x Wood Preservative Primer2x Sealing Primer 1–2 x Compact Varnish PU

1x HK Stain2–3x Compact Varnish PU1x UV Weather Protection Stain clear UV+**

° Windows

° Exterior doors

° Sunrooms

…made of wood

opaquewater based, with activerust protection

–1x All PrimerIntermediate and finishing coat withopaque products

° Steel, copper,brass, pure alumi-nium

° Galvanised steel

° Old coatings

° Rigid PVC

opaquesolvent based, with activerust protection

high gloss 2x Color Varnish 2 in 1

° Railings

° Fences

…slightly rustedferrous metals

Building element Look Desired surface Product base/note Work steps

* When refining wood in outdoor areas, a wood preservative is necessary for non-resistant types of wood!** Does not refer to the wood preservative *** An additional coat of ‘clear UV+’ is possible; the desired shade of colour lasts longer and when renovated in

time, the surface can be simply recoated with ‘clear UV+’.**** Universal Oil clear: Three coats are recommended for softwood

Find.Fix.Matrix at www.remmers.de

52

FIND.FIX.MATRIX FOR INDOOR AREASYour System Guide for Perfect Wood Refinement

t r a n s l u -cent / clear

water basedsilk gloss

naturally matt water based

Building element Look Desired surface Product base/note

2x UV Weather Protection Stain

2x Decorative Wax Stain

opaque

water basedsilk gloss, white and lightshades of colour

silk gloss, medium anddark shades of colour

water based

2x Sealing Primer1x Finishing Paint

2x Finishing Paint

Work steps

° Ceiling & wallpanels

clear

water basedsilk gloss /silk matt

naturally matt solvent based

1x Decorative Wax Stain*2x Stair & Parquet Varnish

1x Decorative Wax Stain*2x Hard Wax Oil

° Solid wood furniture

° Parquet

° Stairs

° Cork floors

clear

water basedsilk gloss /silk matt

naturally matt solvent based

2x Stair & Parquet Varnish

2x Hard Wax Oil

° Interior doors

opaque

solvent basedsilk gloss

high gloss solvent based

2x UV Opaque Top

2x Color Varnish 2 in 1

opaquewater based, with activerust protection

–1x All PrimerIntermediate and finishing coats withopaque products

° Steel, copper,brass, pure aluminium

° Galvanised steel

° Old coatings

° Rigid PVC

opaquesolvent based, with activerust protection

high gloss 1x Color Varnish 2 in 1

° Radiators

° Ferrous metals(slightly rusted)

Note: A wood preservative is not necessary when refining wood in indoor areas!* For coloured decoration, prime with Decorative Wax Stain.

Find.Fix.Matrix at www.remmers.de

53

THE LINE OF PRODUCTSWood Preservative, Wood Refinement and Care Products for Wood at a Glance

Wood Preservative Stain Outdoors

Art. No. / shade of colour Container sizes / sales unit

2250 – stone pine/larch 2256 – palisander 2264 – light oak2251 – teak 2257 – silver grey 2266 – hemlock2252 – ebony 2260 – nutwood 2268 – white2253 – chestnut 2261 – clear 2292 – salt green2254 – fir green 2262 – pine 2267 – special colours2255 – mahogany 2263 – rustic oak

6 x 0.75 l2 x 2.5 l2 x 5.0 l10.0 l20.0 l


2715 – light oak 2720 – mahogany2716 – pine 2721 – white*2717 – stone pine/larch 2722 – silver grey*2718 – nutwood 2723 – palisander2719 – teak

6 x 0.75 l2 x 2.5 l2 x 5.0 l20.0 l

* not in 20.0 l cans


2714 – clear 6 x 0.75 l2 x 2.5 l2 x 5.0 l20.0 l


2234 – silver grey 2242 – nutwood 2246 – pine2235 – white 2243 – ebony 2247 – stone pine/larch2238 – rustic oak 2244 – teak 2248 – palisander2239 – light oak 2245 – fir green 2237 – special colours2240 – clear UV+

6 x 0.75 l2 x 2.5 l2 x 4.0 l20.0 l


1553 – clear UV+ 1561 – white1555 – light oak 1562 – pine1556 – stone pine/larch 1563 – walnut*1557 – teak 1564 – silver grey*1558 – mahogany* 1565 – special colours1559 – nutwood

6 x 0.75 l2 x 2.5 l2 x 5.0 l

* not in 5.0 l cans


2046 – clear 6 x 0.75 l2 x 2.5 l2 x 5.0 l20.0 l

Wood Refinement Indoors


2302 – antique grey 2307 – cherry2303 – beech 2308 – toscana grey2305 – oak 2400 – clear2306 – mocca 2401 – white

6 x 0.75 l2 x 2.5 l10.0 l


2390 – clear (silk gloss)2391 – clear (silk matt)

6 x 0.75 l2 x 2.5 l

HK STA

INWOOD CREAM

WOOD PRESERVA

TIVE

clear

Long

Tim

e STA

IN UV

UV W

EATHER PRO-

TECTION STA

IN

WOOD PRESERVA

TIVE

PRIM

ER

DECORATIVE W

AX

STA

INSTA

IR & PA

RQUET

VARNISH

54

Wood Refinement Indoors


2393 – clear 6 x 1.0 l


0695 – clear0668 – special colours

6 x 0.75 l2 x 2.5 l20.0 l


0687 – clear 6 x 1.0 l


2064 – clear 16 x 0.25 l6 x 0.75 l

Wood Windows & Wood Doors


2750 – clear 2756 – pine2753 – palisander 2757 – light oak2754 – nutwood 2758 – teak2755 – afromosia 2749 – special colours

6 x 0.75 l2 x 2.5 l


3470 – white3475 – special colours

6 x 0.75 l2 x 2.5 l


3420 – clear 3427 – mahogany3422 – pine 3428 – nutwood3423 – light oak 3429 – palisander3424 – afromosia 3439 – special colours3426 – teak

6 x 0.75 l2 x 2.5 l


2705 – white2709 – special colours

6 x 0.75 l2 x 2.5 l2 x 5.0 l

Art. No. / shade of colour Sets contain

2745 – Care Set for Windows2746 – Care Set for Doors

250 ml Cleaner250 ml Balsam2 x special cloths

STA

IR & PARQUET

FRESH

HARD W

AX OIL

HARD W

AX POLISH

ANTI-INSECT PLU

SUV TRANSLU

CENT

TOP

COMPA

CT VARNISH

PU

COMPA

CT STA

IN PU

UV OPA

QUE TOP

CARE SETS FOR

WINDOWS & DOORS

55

Finishing Paints Indoors & Outdoors


3440 – white 6 x 0.75 l2 x 2.5 l2 x 5.0 l10.0 l


3600 – white 3606 – bottle green 3614 – gold yellow*3601 – light grey 3607 – nut brown 3615 – black3602 – dark grey 3608 – tobacco brown 3616 – light ivory*3603 – royal blue* 3610 – reddish brown 1565 – special colours3604 – Frisian blue*/** 3611 – Schedish red3605 – moss green 3612 – corn yellow*/**

6 x 0.75 l2 x 2.5 l2 x 5.0 l10.0 l20.0 l (only 3600 white)

* not in 5.0 l cans ** not in 10.0 l cans


5420 – white5421 – grey5422 – reddish brown

6 x 0.375 l6 x 0.75 l2 x 2.5 l10.0 l


1383 – rape seed yellow* 1384 – light grey 1388 – white aluminium*1317 – fire red* 1385 – nut brown* 1332 – special colours1321 – enzian blue* 1386 – chocolate brown*1323 – leaf green 1387 – cream white*1324 – moss green 1329 – deep black1325 – silver grey 1330 – pure white

6 x 0.375 l6 x 0.75 l2 x 2.5 l

* not in 2.5 l cans

Protection & Care Wood in Gardens


2652 – clear2653 – teak2654 – larch2655 – bangkirai2656 – special colours

6 x 0.75 l2 x 2.5 l2 x 5.0 l


2632 – Bangkirai Oil2633 – Douglas Fir Oil2634 – Larch Oil2635 – Teak Oil 2636 – Universal Oil2637 – special colours

6 x 0.75 l2 x 2.5 l2 x 5.0 l


0676 6 x 1.0 l2 x 2.5 l

SEALING PRIM

ER

FINISHING PAINT

ALL

PRIM

ER

COLO

R VARNISH 2 in

1MAINTENANCE OIL

GARDEN W

OOD OILS

GREEN GROWTH

REMOVER

721

/ 05

.12

GB

Remmers Baustofftechnik · 49624 Löningen · Tel.: +49 (0 )54 32 / 83-0 · Fax: +49 (0 )54 32 / 39 85 www.remmers.de

Consulting and Sale:

Remmers (UK) Limited Crawley United KingdomTel.: +44(0) 845 373 0103Fax: +44(0) 845 373 0104 www.remmers.co.uk

Remmers India Pvt. Ltd.GurgaonTel.: +91 124 400 9131Fax: +91 124 400 9134www.remmers.in

TRANSLUCENT COATINGS AND PAINTS FOR WOOD

Documents