Training Calendar for Siemens Sinumerik CNC … 1 Training Calendar for Siemens Sinumerik CNC Systems and Drives October 2013 – March 2014, Bangalore Sl. No Sinumerik / Simodrive
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
s
1
Training Calendar for Siemens Sinumerik CNC Systems and DrivesOctober 2013 – March 2014, Bangalore
*Note: Minimum Booking should be 6 to 8 participants per each course.
• Please note that the course fee is exclusive of service tax, presently it is 12.36%.
• Any change in Tax Rate will be accordingly applied.
• The course contents are attached below for your reference
s
3
General Information:
Retention Clause: Siemens Ltd., obligation to fulfil this agreement is subject to the proviso that the fulfilment is not prevented by any impediments arising out of national and international foreign trade and customs requirements or any embargos[or other sanctions]”
Destination Control Clause: Goods labeled with “AL” not equal to “N” are subject to European or German export authorization when being exported out of the EU. Goods labeled with “ECCN” not equal to “N” are subject to US re-export authorization. Even without a label or with label “AL:N”, or “ECCN:N”, authorization may be required due to the final end use and destination for which the goods are to be used.
Reservation Clause: This Quotation is made subject to all necessary export licenses and other permission being obtained by the recipient, from the relevant authorities, for the destination & intended use of the goods and / or services.
“Siemens shall not be obligated to fulfill this agreement if such fulfillment is prevented by any impediments arising out of national or international foreign trade or customs requirements or any embargoes or other sanctions”.
Courses at Bangalore will be conducted at Competence Development Centre address as mentioned below
Note: For registration of seats for courses, kindly fill the registration form attached below (Page-5) and send to email: [email protected]
s
4
• Registration of seats for Training Courses can be made by fax or e-mail using the format, which is attached. Alternatively, your Order can be sent to our Training Centre by post / courier as above mentioned address :
• Kindly note that Rupee rates mentioned for our training programmes are applicable only for Indian nationals sponsored by Indian Companies. For foreign nationals or Indian nationals sponsored by foreign companies, rates will be quoted in EURO only. Kindly contact us for more details on the same.
• The course fee is to be paid in advance only on confirmation of seat. The course fee is to be paid by DD / Cheque in favour of Siemens Ltd. payable at Bangalore or you can also do RTGS / NEFT online transfer for details pls. contact us.
• The course fee includes course material, lunch, tea and excludes breakfast, accommodation, transport and also any other incidental charges
• Since there are limited seats in each programme. The seats are confirmed on First come first served basis.
• The normal Course timings are from 09:45 to 17:30Hrs with a one-hour lunch break between 13:00 and 14:00 Hrs. Any alteration in the venue or Course Timings will be intimated to the participants at least a week in advance.
• Every attempt will be made to conduct the courses as announced. However we reserve the right to postpone or cancel the courses due to inadequate booking or circumstances beyond our control. We shall do our best to send timely communication in such situations, if possible.
• For foreign nationals, rules laid down by Govt. of India are applicable. Please intimate us 4 weeks in advance.
• In the event of non-attendance, you will be invoiced for 80% of the applicable price per course, if a written cancellation is not received at least 7 calendar days prior to the start of the course.
• System Overview of 808D • Overview of individual hardware connected in 808D
• Switching on and preparing for commissioning • Commissioning diagram
• Default PLC applications • Commissioning the prototype
• Other frequently used functions
DAY 2
• Overview SINAMICS V60 and V20 drive connected to 808 • Interface definition
• Signal sequence example • Commissioning of V60
• Main menu, Function menu • Setpoints from NC
• First commissioning • System commissioning
• Parameter list
DAY 3
• Operating in the “SYSTEM” area in 808D • Data backup
• 808D Service Guide • V60 and V20 LED Status Indicators
• Errors during the self test- other faults
DAY 4
• Review of Day 1 to Day3 information’s • Fault finding exercise
• Exercise on taking Backup/Restore of NC-PLC backups, • Open session
PLC backup through Programming tool 808
s
15
Guide for planning your stay in Bangalore
This is only for your easy refernce. Siemens does not take / own any liability for any data below this sheet. This info is given to help training participants for booking hotels in advance. Hotel charges will be settled directly by participants.
Hotels Near by Siemens training center.
Hotel St. Marks INN#35, St. Marks Road, Bangalore - 560001Tel: +91-80-41122783Email: [email protected]