Trailer mounted drill pipe, collar and casing handling system safely lifts tubulars from horizontal position into alignment with tilting top head. ■ Designed for Telemast model rigs equipped with tilting top head ■ Hands free operation ■ 5,000* lb lift capacity ■ Tubular range to 30” diameter ■ Casing length to 47” ■ Pipe rack adjustable from 47” to 77” ■ Add hydraulic rack sets to load from both sides Trailer Mounted Drill Pipe & Casing Handling System *Varies by top head rating
2
Embed
Trailer Mounted Drill Pipe & Casing Handling · PDF fileTrailer mounted drill pipe, collar and casing handling system safely lifts tubulars from ... Skid mounted pipe racks hydraulically
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Trailer mounted drill pipe, collar and casing
handling system safely lifts tubulars from
horizontal position into alignment with tilting
top head.
� Designed for Telemast model rigs equipped with tilting top head
� Hands free operation
� 5,000* lb lift capacity
� Tubular range to 30” diameter
� Casing length to 47”
� Pipe rack adjustable from 47” to 77”
� Add hydraulic rack sets to load from both sides
Trailer Mounted Drill Pipe & Casing Handling System
*Varies by top head rating
LOAD SAFE SPECIFICATIONS
Custom built tandem axle trailer is equipped with (8) 245/70R22.5tires (44,400 lb rating) on 10 hole disc aluminum wheels,Hendrickson 25K tandem axle air ride suspension, ABS brakes,DOT lights, 12 V electricalsystem and 2" SAE king pin.
Tubular Length: up to 47 ft (14.32 m)
Tubular Diameter Jaws Removed: up to 30 in (762 mm)
Slide Travel: 8 ft (2.4 m)
Load Height: 47 in (1.19 m)
Transport Width with or without Hydraulic Pipe Racks Stowed: 9'10"
Transport Length: 40 ft (12.19 m)
Weight: Approx. 20,000 lb (9,090 kg)
Weight with Racks Stowed: 29,000 lbs (13,181 kg)
Hydraulic Pipe Racks:Skid mounted pipe racks hydraulically raise and lower to roll drillpipe and casing onto and off of the Load Safe Automated PipeHandler. Position the hydraulic pipe racks between pipe transporttrailers, flat bed trucks, or staging racks and hydraulically adjustup or down to the proper working height. Racks are powered byrig hydraulic system thru quick disconnect hoses. Rack loadingarea width 166". Rack height is adjustable from 47" to 77" to allowtransfer of tooling from standard pipe hauling trailers.
These specifications are based on theoretical calculations and industry standards.Performance will vary according to actual drilling conditions. Schramm, Inc. continu-ously improves its products and reserves the right to change specifications, design,prices and terms at any time without notification or obligation. These specifications donot extend any warranty, expressed or implied, nor do they or Schramm, Inc. make orimply any representation of the machine’s merchantability or fitness for a particularpurpose.
SCHRAMM, INC. • 800 E. Virginia Avenue • West Chester, PA 19380 USA • Phone: 610-696-2500