Top Banner
Lanus Industries LLC USA CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 1 API PIPE Seamless & ERW Welded Carbon Steel |Stainless Steel Lanus Indusries LLC USA
70

4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Aug 31, 2014

Download

Documents

Rami Kchaou
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 1

API PIPE Seamless & ERW Welded

Carbon Steel |Stainless Steel

Lanus Indusries LLC ● USA

Page 2: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 2

Pipe and Tubes

Lanus is suppling practically all kinds of Line pipes that meet specific Oil & Gas project requirements.

Seamless Carbon Steel Pipe for LINE PIPE Specificaiton: Diameter 15~1200 wall thickness 3~30

Material: ASTM A53 Gr.B, ASTM A106 Gr. A/B/C, 20#, 20G, Q345E, API 5L, X52, X42,ST37.0 STPG.K55, STK490, GB/T8163-1999, GB3087-1999, GB5310-1995 standards.

Welded Carbon Steel Pipe for LINE PIPE Specification: Diameter 15~1200 wall thickness 3~30

Material: ASTM A53 Gr.B, ASTM A106 Gr. A/B/C, 20#, 20G, Q345E, API 5L, X52, X42,ST37.0 STPG.K55, STK490, GB/T8163-1999, GB3087-1999, GB5310-1995 standards.

Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply , transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields

Seamless Stainless Steel Pipe for LINE PIPE Specification: Size: OD: (6 to 580) ( 1-30) (3000-12000) mm diameter wall thickness 1~30mm

Seamless Pipe Material: 304, 304L, 321, 316, 316L, 317, 310S Seamless Tube Material: ASTMA269, ASTMA312, ASTMA511, ASTMA213/A213M, ASTMA312/A312M JIS3446, JIS3448, JIS3459, JISG3463,

DIN2462 ISO9001: 2000

Welded Stainless Steel Pipe for LINE PIPE Specification: Diameter 15~1200 wall thickness 3~30

Seamless Pipe Material: 304, 304L, 321, 316, 316L, 317, 310S Seamless Tube Material: ASTMA269, ASTMA312, ASTMA511, ASTMA213/A213M, ASTMA312/A312M JIS3446,

JIS3448, JIS3459, JISG3463, DIN2462 ISO9001: 2000 Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply ,

transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields

DIMENSIONS: API 5L | ANSI B36.10 | ANSI B36.19 Carbon Steel Matls Alloy Matls Stainless Steel Matls Special Alloy API 5L Gr.B+70 – ASTM 106

Gr. B, ASTM A333 Gr. 6 –ASTM A671 –ASTM A672 –

ASTM A53 Gr. A/B.

ASTM A335 P1 –P11 -P22 –P5

– P9 - P91 – P92

ASTM A312 TP304/304L/304H – ASTM A312 TP321/321H- ASTM A312 TP347/347H-

ASTM A312 TP 316/316L/316H

Duplex – Super Duplex – Inconel – Incoloy – Monel – Hastelloy -

Titanium

Page 3: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 3

Welcome to LANUS INDUSTRIES LLC — The LANUS is one of the leading wholesale suppliers of Seamless/Welded Carbon Steel and Seamless/Welded Stainless Steel Pipe in the United States. LANUS is headquartered in W.O USA. Our business mainly is supplied for North and South America and North Sea Oil and Gas industries. We manufactured all kinds of Carbon Steel/Stainless Steel,Alloy Steel and Alloy Stainless Steel Pipe and Tube supplying for Oil and Gas Plant, petrol chemical, oil refineries and power plant. We also OEM manufacturing in accordance to customers design and requirement. Our pipe are manufactured by our cooperated plant in China,. Technical engineering and “Q.C” control engineer permanent stay at our cooperated plant.and our distributors covering North & South America,Europe,Middle,S.E.A countries etc,.

INTRODUCTION

Thank you for your interest in Lanus Industries LLC USA. I am pleased to take this opportunity to introduce our company and product line to you. Lanus was incorporated in 2005 with corporate headquarters, manufacturing and supplies all kinds PIPE. Our cooperated CHINA factories is certified to ISO9001: 2000. LANSU is proud to offer the widest product line of PIPE in the world. This line includes, but is not limited to: Titanium Pipe and Tube Monel Pipe and Tube Inconel Pipe and Tube Duplex and Supper Pipe and Tube Copper Nickle Pipe and Tube Copper Aluminum Bronze Pipe and Tube Aluminium Brass Pipe and Tube Copper Pipe and Tube Brass Pipe and Tube Boiler Pipe and Tube Low and High temperature Lanus is unique in that all our PIPES are available in all API, DIN, JIS standard and API pressure classes and virtually any metallurgy required. From cast iron, ductile iron, carbon steel and alloy steel to stainless steel and exotics including titanium and Aluminium Bronze, Lanus can accommodate the most ordinary and extraordinary requirements. We also kept some stock at our Cooperated Plant for prompt shipment, and level of services, product availability and competitive pricing rarely found in our industry. We thank you for interest in Lanus and look forward to providing solutions to your requirements. If you have any questions, please feel free to contact our office anytime. Sincerely, Managing Sales Director Lanus Industries LLC USA

Page 4: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 4

Our cooperated

CHINA factories is

Certified to

ISO9001: 2000 Certificate: No

03106Q10220ROS

Page 5: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 5

Welcome to LANUS

Type of Pipe Seamless

Pipe ERW Pipe

SAW Pipe

Standard of Pipe

API Std DIN Std JIS Std

■ Alloy Pipes ■ Casing and Tubing ■ Pressure Tuning ■ Industrial Pipes ■ Large OD Pipes ■ Structure Pipes

■ Drill Pipes ■ Boilers Pipes ■ Heat Exchanges Pipes ■ Hastelloy Pipes

■ Brass Pipes ■ Copper Pipes|Tube ■ Stainless Steel Pipe ■ Copper Aluminium Bronze Pipe ■ Titanium Pipes ■ Hattesloy Pipes

■ Aluminium Brass Pipe/Tube ■ Copper Nickle Pipe/Tube ■ Duplex Supper/Duplex Pipe ■ Supper Duplex Pipe

■ Monel Pipe ■ Inconel Pipe

Page 6: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 6

Pipe Line Photo OIL TANKER

OIL REFINERY

PIPE LINE

Page 7: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 7

API PIPE SIZE

API Seamless Carbon Steel Specification Seamless Steel Pipe for LINE PIPE

Line Pipe Seamless Steel Pipe Specification : out diameter 15~1200 wall thickness 3~30 Material: ASTM A106 Gr. A/B, API 5L, X52, X42, ST52, ASTM A53 Gr. B (ST 53 Gr. B), K55, STK490, STPG, C20 Diameter 15~1200 wall thickness 3~30

Length of Pipe: Random Lengths,Range 1(5.8 or 6M) Range 2 (9M) Range 12M Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply ,

transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields Schedule | O.D in inch | Wall Thickness in inch | I.D in inch

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

1 / 8 0.405 0.35 .1383

.049 .1863

- - .068 .2447

.068 .2447

- .095 .3145

.095 .3145

- - - - -

1/ 4 0.540 0.49 .2570

.065 .3297

- - .088 .4248

.088 .4248

- .119 .5351

.119 .5351

- - - - -

3 / 8 0.675 0.049 .3276

.065 .4235

- - .091 .5676

.091 .5676

- .126 .7388

.126 .7388

- - - - -

1 / 2 0.840. .065 .5383

.083 .6710

- - .109 .8510

.109 .8510

- .146 1.088

.147 1.088

- - - .187 1.304

.294 1.714

3 / 4 1.050 .065 .6878

.083 .8572

- - .113 1.131

.113 1.131

- .1554 1.474

.154 1.474

- - - .218 1.937

.308 2.441

1 1.315 .065 .8678

.109 1.404

- - .133 1.679

.144 1.670

- .179 2.172

.179 2.172

- - - .250 2.844

.358 3.650

1.1/4 1.660 .065 1.107

.109 1.806

- - .140 2.273

.140 2.273

- .191 2.997

.191 2.997

- - - .250 3.675

.382 5.214

1.1/2 1.900 .065 1.274

.109 2.805

- - .145 2.718

.145 2.718

- .200 3.631

.200 3.631

- - - .281 4.859

.400 6.408

2 2.375 .065 1.604

.109 2.638

- - .154 3.653

.154 3.653

- .218 5.022

.218 5.022

- - - .343 7.444

.436 9.029

2.1/2 2.875 .083 2.475

.120 3.531

- - .203 5.793

.203 5.793

- .276 7.661

.276 7.661

- - - .375 10.01

.552 13.70

3 3.50 .083 3.029

.120 4.332

- - .216 7.576

.216 7.576

- .300 10.25

.300 10.25

- - - 4.37 14.32

.600 18.58

3.1/2 4.0 .083 3.472

.120 4.973

- - .226 9.109

.226 9.109

- .318 12.51

.318 12.51

- - - - .636 22.85

4 4.5 .083 3.915

.120 5.613

- - .237 10.79

.237 10.79

.281 12.66

.337 14.98

.337 14.98

- .437 19.01

- .531 22.51

.674 27.54

4.1/2 5.00 - - - - - .247 12.53

- - .355 17.61

- - - - .710 32.53

5 5.563 .109 6.349

.134 7.770

- - .258 14.62

.258 14.62

- .375 20.78

.375 20.78

- .500 27.04

- .625 32.96

.750 38.55

6 6.625 .109 7.585

.134 9.289

- - .280 18.97

.280 18.97

- .432 28.57

.432 28.57

- .562 36.39

- .718 45.30

.864 53.16

7 7.625 - - - - - .301 23.57

- - .050 38.05

- - - - .875 63.08

8 8.625 .109 9.914

.148 13.40

.250 22.36

.277 24.70

.322 28.55

.322 28.55

.406 35.64

.500 43.39

.500 43.39

.593 50.87

.718 60.63

.812 67.76

.906 74.69

.875 72.42

9 9.625 - - - - - .342 33.90

- - .500 48.72

- - - -

10 10.75 .134 15.19

.165 18.70

.250 28.04

.307 34.24

.365 40.48

.365 40.48

.500 54.74

.593 64.33

.500 54.74

.718 76.93

.843 107.2

1.000 104.1

1.125 115.7

-

11 11.75 - - - - - .375 45.55

- - .500 60.07

- - - - -

12 12.75 .165 22.18

.180 24.20

.250 33.38

.330 43.77

.406 53.53

.375 49.56

.688 88.51

.562 73.16

.500 65.42

8.43 107.2

1.00 125.5

1.125 139.7

1.312 160.3

-

14 14.00 - .250 36.71

.312 45.68

.375 54.57

.437 63.37

.375 54.57

.750 106.1

.593 84.91

.500 72.09

.937 130.7

1.093 150.7

1.250 170.2

1.406 189.1

-

16 16.00 - .250 42.05

.312 45.68

.375 62.58

.500 82.77

.375 62.58

.843 136.5

.656 107.5

.500 82.77

1.031 164.80

1.218 192.3

1.437 223.5

1.592 245.1

-

18 18.00 - .250 47.30

.312 52.36

.437 82.06

.562 104.8

.375 70.59

.937 170.8

.750 138.2

.500 93.45

1.156 208.0

1.375 244.1

1.562 274.2

1.781 308.5

-

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Page 8: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 8

API PIPE SIZE API Seamless Carbon Steel Specification

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

20 20.00 - .250 52.73

.375 78.60

.500 104.2

.593 122.9

.375 78.60

.812 166.4

1.031 208.9

.500 104.1

1.280 256.1

1.500 296.4

1.750 341.1

1.968 379.0

-

22 22.00 - .250 58.07

.375 86.61

.500 114.8

- .375 86.61

.875 197.4

1.125 250.8

.500 114.8

1.375 302.9

1.625 353.6

1.875 403.0

2.125 451.1

-

24 24.00 - .250 63.41

.375 94.62

.562 140.8

.688 171.2

.375 94.62

- - .500 125.5

1.531 367.4

1.182 429.4

2.062 483.1

2.343 541.9

-

26 26.00 - .312 85.60

.500 136.2

- - .375 102.6

- - .500 136.2

.750 202.3

1.000 267.0

1.256 330.4

1.500 392.5

2.000 512.6

28 28.00 - .312 92.36

.500 146.8

.625 182.7

- .375 110.6

- - .500 146.8

.750 218.3

1.000 288.4

1.250 357.1

1.500 424.5

2.000 555.4

30 30.00 - .312 98.93

.500 157.5

.625 196.1

- .375 118.6

- - .500 157.5

.750 234.3

1.00 331.1

1.250 383.8

1.500 456.6

2.000 598.1

32 32.00 - .312 105.6

.500 168.2

.625 209.4

- .375 126.7

- - .500 168.2

.750 250.3

1.000 331.1

1.250 410.6

1.500 486.6

2.000 640.8

34 34.00 - .312 112.3

.500 178.9

.625 222.8

- .375 134.7

- - .500 178.9

.750 266.3

1.000 352.4

1.250 437.2

1.500 520.7

2.000 683.5

36 36.00 - .312 118.9

.500 189.6

.625 236.1

- .375 142.7

- - .500 189.0

.875 328.2

1.000 373.8

1.250 463.9

1.500 552.7

2.000 726.2

42 42.00 - - - - - .375 166.7

- - .500 221.6

.750 330.4

1.000 437.9

1.250 544.0

1.500 648.8

2.000 854.4

48 48.00 - - - - - .375 190.7

.500 253.6

.750 378.5

1.000 502.0

1.250 624.1

1.500 744.9

2.000 982.6

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Formula to Find Weight Per Foot of All Plain End Pipe Weight

= (LB/FT)

O.D. Wall Thickness Wall Thickness { - } X 10.69 X (Inches) ( Inches ) ( Inches )

API PIPE SIZE

API Seamless Carbon Steel Pipe

Words painted on PIPE SURFACE

LIV ASTM A53 Gr. A Seamless Carbon Steel Pipe Size 16 IN 406.4mm X S40 (12.70mm W.T) X 5.8M X 928.70Kg/Lgth B.E - USA

Page 9: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 9

STANDARD PIPE SIZE

API ERW WELDED CARBON STEEL PIPE Welded Carbon Steel Pipe for LINE PIPE Specificaiton:

Diameter 15~1200 wall thickness 3~30 Material: ASTM A53 Gr.B, ASTM A106 Gr. A/B/C, 20#, 20G, Q345E, API 5L, X52, X42,ST37.0 STPG.K55, STK490,

GB/T8163-1999, GB3087-1999, GB5310-1995 standards. Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply ,

transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields Length of Pipe: Random Lengths,Range 1(5.8 or 6M) Range 2 (9M) Range 12M

Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply , transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields

Schedule | O.D in inch | Wall Thickness in inch | I.D in inch PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

1 / 8 0.405 0.35 .1383

.049 .1863

- - .068 .2447

.068 .2447

- .095 .3145

.095 .3145

- - - - -

1/ 4 0.540 0.49 .2570

.065 .3297

- - .088 .4248

.088 .4248

- .119 .5351

.119 .5351

- - - - -

3 / 8 0.675 0.049 .3276

.065 .4235

- - .091 .5676

.091 .5676

- .126 .7388

.126 .7388

- - - - -

1 / 2 0.840. .065 .5383

.083 .6710

- - .109 .8510

.109 .8510

- .146 1.088

.147 1.088

- - - .187 1.304

.294 1.714

3 / 4 1.050 .065 .6878

.083 .8572

- - .113 1.131

.113 1.131

- .1554 1.474

.154 1.474

- - - .218 1.937

.308 2.441

1 1.315 .065 .8678

.109 1.404

- - .133 1.679

.144 1.670

- .179 2.172

.179 2.172

- - - .250 2.844

.358 3.650

1.1/4 1.660 .065 1.107

.109 1.806

- - .140 2.273

.140 2.273

- .191 2.997

.191 2.997

- - - .250 3.675

.382 5.214

1.1/2 1.900 .065 1.274

.109 2.805

- - .145 2.718

.145 2.718

- .200 3.631

.200 3.631

- - - .281 4.859

.400 6.408

2 2.375 .065 1.604

.109 2.638

- - .154 3.653

.154 3.653

- .218 5.022

.218 5.022

- - - .343 7.444

.436 9.029

2.1/2 2.875 .083 2.475

.120 3.531

- - .203 5.793

.203 5.793

- .276 7.661

.276 7.661

- - - .375 10.01

.552 13.70

3 3.50 .083 3.029

.120 4.332

- - .216 7.576

.216 7.576

- .300 10.25

.300 10.25

- - - 4.37 14.32

.600 18.58

3.1/2 4.0 .083 3.472

.120 4.973

- - .226 9.109

.226 9.109

- .318 12.51

.318 12.51

- - - - .636 22.85

4 4.5 .083 3.915

.120 5.613

- - .237 10.79

.237 10.79

.281 12.66

.337 14.98

.337 14.98

- .437 19.01

- .531 22.51

.674 27.54

4.1/2 5.00 - - - - - .247 12.53

- - .355 17.61

- - - - .710 32.53

5 5.563 .109 6.349

.134 7.770

- - .258 14.62

.258 14.62

- .375 20.78

.375 20.78

- .500 27.04

- .625 32.96

.750 38.55

6 6.625 .109 7.585

.134 9.289

- - .280 18.97

.280 18.97

- .432 28.57

.432 28.57

- .562 36.39

- .718 45.30

.864 53.16

7 7.625 - - - - - .301 23.57

- - .050 38.05

- - - - .875 63.08

8 8.625 .109 9.914

.148 13.40

.250 22.36

.277 24.70

.322 28.55

.322 28.55

.406 35.64

.500 43.39

.500 43.39

.593 50.87

.718 60.63

.812 67.76

.906 74.69

.875 72.42

9 9.625 - - - - - .342 33.90

- - .500 48.72

- - - -

10 10.75 .134 15.19

.165 18.70

.250 28.04

.307 34.24

.365 40.48

.365 40.48

.500 54.74

.593 64.33

.500 54.74

.718 76.93

.843 107.2

1.000 104.1

1.125 115.7

-

11 11.75 - - - - - .375 45.55

- - .500 60.07

- - - - -

12 12.75 .165 22.18

.180 24.20

.250 33.38

.330 43.77

.406 53.53

.375 49.56

.688 88.51

.562 73.16

.500 65.42

8.43 107.2

1.00 125.5

1.125 139.7

1.312 160.3

-

14 14.00 - .250 36.71

.312 45.68

.375 54.57

.437 63.37

.375 54.57

.750 106.1

.593 84.91

.500 72.09

.937 130.7

1.093 150.7

1.250 170.2

1.406 189.1

-

16 16.00 - .250 42.05

.312 45.68

.375 62.58

.500 82.77

.375 62.58

.843 136.5

.656 107.5

.500 82.77

1.031 164.80

1.218 192.3

1.437 223.5

1.592 245.1

-

18 18.00 - .250 47.30

.312 52.36

.437 82.06

.562 104.8

.375 70.59

.937 170.8

.750 138.2

.500 93.45

1.156 208.0

1.375 244.1

1.562 274.2

1.781 308.5

-

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Page 10: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 10

STANDARD PIPE SIZE

API ERW WELDED CARBON STEEL PIPE PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

20 20.00 - .250 52.73

.375 78.60

.500 104.2

.593 122.9

.375 78.60

.812 166.4

1.031 208.9

.500 104.1

1.280 256.1

1.500 296.4

1.750 341.1

1.968 379.0

-

22 22.00 - .250 58.07

.375 86.61

.500 114.8

- .375 86.61

.875 197.4

1.125 250.8

.500 114.8

1.375 302.9

1.625 353.6

1.875 403.0

2.125 451.1

-

24 24.00 - .250 63.41

.375 94.62

.562 140.8

.688 171.2

.375 94.62

- - .500 125.5

1.531 367.4

1.182 429.4

2.062 483.1

2.343 541.9

-

26 26.00 - .312 85.60

.500 136.2

- - .375 102.6

- - .500 136.2

.750 202.3

1.000 267.0

1.256 330.4

1.500 392.5

2.000 512.6

28 28.00 - .312 92.36

.500 146.8

.625 182.7

- .375 110.6

- - .500 146.8

.750 218.3

1.000 288.4

1.250 357.1

1.500 424.5

2.000 555.4

30 30.00 - .312 98.93

.500 157.5

.625 196.1

- .375 118.6

- - .500 157.5

.750 234.3

1.00 331.1

1.250 383.8

1.500 456.6

2.000 598.1

32 32.00 - .312 105.6

.500 168.2

.625 209.4

- .375 126.7

- - .500 168.2

.750 250.3

1.000 331.1

1.250 410.6

1.500 486.6

2.000 640.8

34 34.00 - .312 112.3

.500 178.9

.625 222.8

- .375 134.7

- - .500 178.9

.750 266.3

1.000 352.4

1.250 437.2

1.500 520.7

2.000 683.5

36 36.00 - .312 118.9

.500 189.6

.625 236.1

- .375 142.7

- - .500 189.0

.875 328.2

1.000 373.8

1.250 463.9

1.500 552.7

2.000 726.2

42 42.00 - - - - - .375 166.7

- - .500 221.6

.750 330.4

1.000 437.9

1.250 544.0

1.500 648.8

2.000 854.4

48 48.00 - - - - - .375 190.7

.500 253.6

.750 378.5

1.000 502.0

1.250 624.1

1.500 744.9

2.000 982.6

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Formula to Find Weight Per Foot of All Plain End Pipe Weight

= (LB/FT)

O.D. Wall Thickness Wall Thickness { - } X 10.69 X (Inches) ( Inches ) ( Inches )

STANDARD PIPE SIZE

API ERW Welded Carbon Steel Pipe Words painted on PIPE SURFACE

LIV – ASTM A53 Gr. A ERW Welded Carbon Steel Pipe Size 16 IN 406.4mm X S40 (12.70mm W.T) X 5.8M X 928.70Kg/Lgth B.E - USA

Page 11: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 11

Seamless Steel and ERW Welded Carbon Steel Pipe

ASTM A53 Gr. A/B, ASTM API 5L, ASTM A106,ASTM A252

STANDARD PIPE SIZE Physical & Chemical Properties

Welded & Seamless Carbon Steel Pipe for LINE PIPE CHEMICAL REQUIREMENT PHYSICAL

REQUIREMENT

Standard Specification

Application

C Si Mn P S Tensile Strength

Min.

Yeild Strength

Min.

OTHER

TESTS & INSPECTIONS

A 0.25

Max.

-- 0.95 Max.

0.05 Max.

0.05 Max.

48,000PSI (33.7kg/mm2

30,000PSI (21.1kg/mm2)

ASTM A53

B

Steel Pipe for General Uses.

0.30 Max.

-- 1.20 Max.

0.05 Max.

0.06 Max.

60,000PSI (42.2 kg/mm2)

35,000PSI (24.5 kg/mm2)

Class I

0.21 Max.

-- 03.0 Max. 0.60 Max

0.045 Max

0.6 Max

45,000PSI (31.6 kg/mm2)

25,000PSI (17.6kg/mm2)

Grade A25 Class

II 0.21 Max.

-- 03.0 Max. 0.60 Max.

0.045 Max 0.080 Max.

0.06 Max

45,000PSI (31.6kg/mm2)

25,000PSI (17.6 kg/mm2)

A

Line Pipe

0.21 Max

-- 0.90 Max.

0.04 Max

0.06 Max.

48,000PSI (33.7kg/mm2)

30,000PSI (21.1 kg/mm2)

API 5L

B

0.27 Max

.

0.25 Max.

--

1.15 Max.

0.04 Max

0.06 Max

60,000PSI (42.2kg/mm2

30,000PSI (24.6 kg/mm2)

Grade A

0.25 Max.

0.10 Max

0.27 Min. 0.93 Max.

0.048 Max.

0.058 Max.

48,000PPSI (33.7kg/mm2)

30,000PSI (21.1 kg/mm2)

Grade B

0.30 Max.

0.10 Max.

0.29 Min. 1.06 Max.

0.048 Max.

0.058 Max.

60,000PSI (42.2kg/mm2)

35,000PSI (24.6kg/mm2

A106

Grade C

Special

Use where Sevice

Conditions Exist

0.36 Max.

0.10 Max.

0.29 Min. 1.06 Max.

0.048 Max.

0.058 Max.

70,000PSI

(49.2Kg/mm2)

40,000PSI (26.1 kg/mm2

Zinc Coating Test –

18.OZ/FT.Min Hydrostatic Test

Specified Respectively

In size & grade.

1 ---- ---- ---- 0.050 Max.

---- 50,000PSI (35.2Kg/mm2)

30,000PSI (21.1kg/mm2)

2 ---- ---- ---- 0.060 Max.

---- 60,000PSI (42.2Kg/mm2)

35,000PSI (24.6kg/mm2

ASTM A252

3

Steel Pipe Piles

---- ---- ---- 0.060 Max

---- 66,000PSI (46.4Kg/mm2)

45,000PSI (31.6kg/mm2)

No Hydraulic Test Required

Page 12: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 12

Seamless N ERW Welded Carbon Steel

PIPE ASTM A53 Gr. A/B, ASTM API 5L, ASTM

A106,ASTM A252

Carbon Steel Pipe -

Working Pressure

Working Pressure ASTM A53 B to 400°F Nominal

Size (inches)

Pipe Outside

Diameter OD

(inches)

Schedule

Number or weight

Wall

Thickness

-t-

(inches)

Inside

Diameter

-d-

(inches)

Manu- facturing Process

Joint Type psig

40ST 0.088 0.364 CW1) T 188 1/4 0.540

80XS 0.119 0.302 CW T 871

40ST 0.091 0.493 CW T 203 3/8 0.675

80XS 0.126 0.423 CW T 820

40ST 0.109 0.622 CW T 214 1/2 0.840

80XS 0.147 0.546 CW T 753

40ST 0.113 0.824 CW T 217 3/4 1.050

80XS 0.154 0.742 CW T 681

40ST 0.133 1.049 CW T 226 1 1.315

80XS 0.179 0.957 CW T 642

40ST 0.140 1.380 CW T 229 1 1/4 1.660

80XS 0.191 1.278 CW T 594

Page 13: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 13

40ST 0.145 1.610 CW T 231 1 1/2 1.900

80XS 0.200 1.500 CW T 576

40ST 0.154 2.067 CW T 230 2 2.375

80XS 0.218 1.939 CW T 551

40ST 0.203 2.469 CW W 533 2 1/2 2.875

80XS 0.276 2.323 CW W 835

40ST 0.216 3.068 CW W 482 3 3.500

80XS 0.300 2.900 CW W 767

40ST 0.237 4.026 CW W 430 4 4.500

80XS 0.337 3.826 CW W 695

40ST 0.280 6.065 ERW2) W 696 6 6.625

80XS 0.432 5.761 ERW W 1209

30 0.277 8.071 ERW W 526

40ST 0.322 7.981 ERW W 643 8 8.625

80XS 0.500 7.625 ERW W 1106

30 0.307 10.136 ERW W 485

40ST 0.365 10.020 ERW W 606

XS 0.500 9.750 ERW W 887 10 10.75

80 0.593 9.564 ERW W 1081

30 0.330 12.090 ERW W 449

ST 0.375 12.000 ERW W 528

40 0.406 11.938 ERW W 583

XS 0.500 11.750 ERW W 748

12 12.75

80 0.687 11.376 ERW W 1076

30ST 0.375 13.250 ERW W 481

40 0.437 13.126 ERW W 580

14 14.00

XS 0.500 13.000 ERW W 681

Page 14: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 14

80 0.750 12.500 ERW W 1081

30ST 0.375 15.250 ERW W 421 16 16.00

40XS 0.500 15.000 ERW W 596

ST 0.375 17.250 ERW W 374

30 0.437 17.126 ERW W 451

XS 0.500 17.000 ERW W 530

18

18.00

40 0.562 16.876 ERW W 607

20ST 0.375 19.250 ERW W 337

30XS 0.500 19.000 ERW W 477

20

20.00

40 0.593 18.814 ERW W 581 ) CW - continuous weld - a method of producing small diameter pipe (1/2-4") 2) ERW - electric resistance weld - most common form of manufacture for pipe in sizes from 2 3/8-22" OD

• 1 in (inch) = 25.4 mm • 1 psi (lb/in2) = 6,894.8 Pa (N/m2) = 6.895x10-2 bar

Page 15: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 15

API PIPE SIZE

API Seamless Stainless Steel Pipe Seamless Stainless Steel Pipe for LINE PIPE Specification:

Size: OD: (6 to 580) ( 1-30) (3000-12000) mm diameter wall thickness 1~30mm Seamless Pipe Material: 304, 304L, 321, 316, 316L, 317, 310S

Seamless Tube Material: ASTMA269, ASTMA312, ASTMA511, ASTMA213/A213M, ASTMA312/A312M JIS3446, JIS3448, JIS3459, JISG3463, DIN2462 ISO9001: 2000

Length of Pipe: Random Lengths,Range 1(5.8 or 6M) Range 2 (9M) Range 12M Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply ,

transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields Schedule | O.D in inch | Wall Thickness in inch | I.D in inch

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

1 / 8 0.405 0.35 .1383

.049 .1863

- - .068 .2447

.068 .2447

- .095 .3145

.095 .3145

- - - - -

1/ 4 0.540 0.49 .2570

.065 .3297

- - .088 .4248

.088 .4248

- .119 .5351

.119 .5351

- - - - -

3 / 8 0.675 0.049 .3276

.065 .4235

- - .091 .5676

.091 .5676

- .126 .7388

.126 .7388

- - - - -

1 / 2 0.840. .065 .5383

.083 .6710

- - .109 .8510

.109 .8510

- .146 1.088

.147 1.088

- - - .187 1.304

.294 1.714

3 / 4 1.050 .065 .6878

.083 .8572

- - .113 1.131

.113 1.131

- .1554 1.474

.154 1.474

- - - .218 1.937

.308 2.441

1 1.315 .065 .8678

.109 1.404

- - .133 1.679

.144 1.670

- .179 2.172

.179 2.172

- - - .250 2.844

.358 3.650

1.1/4 1.660 .065 1.107

.109 1.806

- - .140 2.273

.140 2.273

- .191 2.997

.191 2.997

- - - .250 3.675

.382 5.214

1.1/2 1.900 .065 1.274

.109 2.805

- - .145 2.718

.145 2.718

- .200 3.631

.200 3.631

- - - .281 4.859

.400 6.408

2 2.375 .065 1.604

.109 2.638

- - .154 3.653

.154 3.653

- .218 5.022

.218 5.022

- - - .343 7.444

.436 9.029

2.1/2 2.875 .083 2.475

.120 3.531

- - .203 5.793

.203 5.793

- .276 7.661

.276 7.661

- - - .375 10.01

.552 13.70

3 3.50 .083 3.029

.120 4.332

- - .216 7.576

.216 7.576

- .300 10.25

.300 10.25

- - - 4.37 14.32

.600 18.58

3.1/2 4.0 .083 3.472

.120 4.973

- - .226 9.109

.226 9.109

- .318 12.51

.318 12.51

- - - - .636 22.85

4 4.5 .083 3.915

.120 5.613

- - .237 10.79

.237 10.79

.281 12.66

.337 14.98

.337 14.98

- .437 19.01

- .531 22.51

.674 27.54

4.1/2 5.00 - - - - - .247 12.53

- - .355 17.61

- - - - .710 32.53

5 5.563 .109 6.349

.134 7.770

- - .258 14.62

.258 14.62

- .375 20.78

.375 20.78

- .500 27.04

- .625 32.96

.750 38.55

6 6.625 .109 7.585

.134 9.289

- - .280 18.97

.280 18.97

- .432 28.57

.432 28.57

- .562 36.39

- .718 45.30

.864 53.16

7 7.625 - - - - - .301 23.57

- - .050 38.05

- - - - .875 63.08

8 8.625 .109 9.914

.148 13.40

.250 22.36

.277 24.70

.322 28.55

.322 28.55

.406 35.64

.500 43.39

.500 43.39

.593 50.87

.718 60.63

.812 67.76

.906 74.69

.875 72.42

9 9.625 - - - - - .342 33.90

- - .500 48.72

- - - -

10 10.75 .134 15.19

.165 18.70

.250 28.04

.307 34.24

.365 40.48

.365 40.48

.500 54.74

.593 64.33

.500 54.74

.718 76.93

.843 107.2

1.000 104.1

1.125 115.7

-

11 11.75 - - - - - .375 45.55

- - .500 60.07

- - - - -

12 12.75 .165 22.18

.180 24.20

.250 33.38

.330 43.77

.406 53.53

.375 49.56

.688 88.51

.562 73.16

.500 65.42

8.43 107.2

1.00 125.5

1.125 139.7

1.312 160.3

-

14 14.00 - .250 36.71

.312 45.68

.375 54.57

.437 63.37

.375 54.57

.750 106.1

.593 84.91

.500 72.09

.937 130.7

1.093 150.7

1.250 170.2

1.406 189.1

-

16 16.00 - .250 42.05

.312 45.68

.375 62.58

.500 82.77

.375 62.58

.843 136.5

.656 107.5

.500 82.77

1.031 164.80

1.218 192.3

1.437 223.5

1.592 245.1

-

18 18.00 - .250 47.30

.312 52.36

.437 82.06

.562 104.8

.375 70.59

.937 170.8

.750 138.2

.500 93.45

1.156 208.0

1.375 244.1

1.562 274.2

1.781 308.5

-

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Page 16: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 16

API PIPE SIZE

API Seamless Stainless Steel Pipe PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

20 20.00 - .250 52.73

.375 78.60

.500 104.2

.593 122.9

.375 78.60

.812 166.4

1.031 208.9

.500 104.1

1.280 256.1

1.500 296.4

1.750 341.1

1.968 379.0

-

22 22.00 - .250 58.07

.375 86.61

.500 114.8

- .375 86.61

.875 197.4

1.125 250.8

.500 114.8

1.375 302.9

1.625 353.6

1.875 403.0

2.125 451.1

-

24 24.00 - .250 63.41

.375 94.62

.562 140.8

.688 171.2

.375 94.62

- - .500 125.5

1.531 367.4

1.182 429.4

2.062 483.1

2.343 541.9

-

26 26.00 - .312 85.60

.500 136.2

- - .375 102.6

- - .500 136.2

.750 202.3

1.000 267.0

1.256 330.4

1.500 392.5

2.000 512.6

28 28.00 - .312 92.36

.500 146.8

.625 182.7

- .375 110.6

- - .500 146.8

.750 218.3

1.000 288.4

1.250 357.1

1.500 424.5

2.000 555.4

30 30.00 - .312 98.93

.500 157.5

.625 196.1

- .375 118.6

- - .500 157.5

.750 234.3

1.00 331.1

1.250 383.8

1.500 456.6

2.000 598.1

32 32.00 - .312 105.6

.500 168.2

.625 209.4

- .375 126.7

- - .500 168.2

.750 250.3

1.000 331.1

1.250 410.6

1.500 486.6

2.000 640.8

34 34.00 - .312 112.3

.500 178.9

.625 222.8

- .375 134.7

- - .500 178.9

.750 266.3

1.000 352.4

1.250 437.2

1.500 520.7

2.000 683.5

36 36.00 - .312 118.9

.500 189.6

.625 236.1

- .375 142.7

- - .500 189.0

.875 328.2

1.000 373.8

1.250 463.9

1.500 552.7

2.000 726.2

42 42.00 - - - - - .375 166.7

- - .500 221.6

.750 330.4

1.000 437.9

1.250 544.0

1.500 648.8

2.000 854.4

48 48.00 - - - - - .375 190.7

.500 253.6

.750 378.5

1.000 502.0

1.250 624.1

1.500 744.9

2.000 982.6

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Formula to Find Weight Per Foot of All Plain End Pipe Weight

=

(LB/FT)

O.D. Wall Thickness Wall Thickness { - } X 10.69 X (Inches) ( Inches ) ( Inches )

API PIPE SIZE

ASTM A312 TP316 Seamless Stainless Steel Pipe ASTM A312 TP304 Seamless Stainless Steel Pipe

Words painted on PIPE SURFACE

LIV – ASTM A312 TP316 Seamless Stainless Steel Pipe Size 16 IN 406.4mm X S40 (12.70mm W.T) X 5.8M X 928.70Kg/Lgth B.E - USA

LIV – ASTM A312 TP304 Seamless Stainless Steel Pipe Size 16 IN 406.4mm X S40 (12.70mm W.T) X 5.8M X 928.70Kg/Lgth B.E - USA

Page 17: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 17

STANDARD PIPE SIZE

Welded Stainless Steel Pipe for LINE PIPE Specification: Diameter 15~1200 wall thickness 3~30

Seamless Pipe Material: 304, 304L, 321, 316, 316L, 317, 310S Seamless Tube Material: ASTMA269, ASTMA312, ASTMA511, ASTMA213/A213M, ASTMA312/A312M JIS3446,

JIS3448, JIS3459, JISG3463, DIN2462 ISO9001: 2000 Length of Pipe: Random Lengths,Range 1(5.8 or 6M) Range 2 (9M) Range 12M

Our products widely uses in the electric power, the thermal energy, offshore oil piling, chemicals, water supply , transporting natural gas, petrol , piling, building bridge, steel structures, and other engineering fields

Schedule | O.D in inch | Wall Thickness in inch | I.D in inch PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

1 / 8 0.405 0.35 .1383

.049 .1863

- - .068 .2447

.068 .2447

- .095 .3145

.095 .3145

- - - - -

1/ 4 0.540 0.49 .2570

.065 .3297

- - .088 .4248

.088 .4248

- .119 .5351

.119 .5351

- - - - -

3 / 8 0.675 0.049 .3276

.065 .4235

- - .091 .5676

.091 .5676

- .126 .7388

.126 .7388

- - - - -

1 / 2 0.840. .065 .5383

.083 .6710

- - .109 .8510

.109 .8510

- .146 1.088

.147 1.088

- - - .187 1.304

.294 1.714

3 / 4 1.050 .065 .6878

.083 .8572

- - .113 1.131

.113 1.131

- .1554 1.474

.154 1.474

- - - .218 1.937

.308 2.441

1 1.315 .065 .8678

.109 1.404

- - .133 1.679

.144 1.670

- .179 2.172

.179 2.172

- - - .250 2.844

.358 3.650

1.1/4 1.660 .065 1.107

.109 1.806

- - .140 2.273

.140 2.273

- .191 2.997

.191 2.997

- - - .250 3.675

.382 5.214

1.1/2 1.900 .065 1.274

.109 2.805

- - .145 2.718

.145 2.718

- .200 3.631

.200 3.631

- - - .281 4.859

.400 6.408

2 2.375 .065 1.604

.109 2.638

- - .154 3.653

.154 3.653

- .218 5.022

.218 5.022

- - - .343 7.444

.436 9.029

2.1/2 2.875 .083 2.475

.120 3.531

- - .203 5.793

.203 5.793

- .276 7.661

.276 7.661

- - - .375 10.01

.552 13.70

3 3.50 .083 3.029

.120 4.332

- - .216 7.576

.216 7.576

- .300 10.25

.300 10.25

- - - 4.37 14.32

.600 18.58

3.1/2 4.0 .083 3.472

.120 4.973

- - .226 9.109

.226 9.109

- .318 12.51

.318 12.51

- - - - .636 22.85

4 4.5 .083 3.915

.120 5.613

- - .237 10.79

.237 10.79

.281 12.66

.337 14.98

.337 14.98

- .437 19.01

- .531 22.51

.674 27.54

4.1/2 5.00 - - - - - .247 12.53

- - .355 17.61

- - - - .710 32.53

5 5.563 .109 6.349

.134 7.770

- - .258 14.62

.258 14.62

- .375 20.78

.375 20.78

- .500 27.04

- .625 32.96

.750 38.55

6 6.625 .109 7.585

.134 9.289

- - .280 18.97

.280 18.97

- .432 28.57

.432 28.57

- .562 36.39

- .718 45.30

.864 53.16

7 7.625 - - - - - .301 23.57

- - .050 38.05

- - - - .875 63.08

8 8.625 .109 9.914

.148 13.40

.250 22.36

.277 24.70

.322 28.55

.322 28.55

.406 35.64

.500 43.39

.500 43.39

.593 50.87

.718 60.63

.812 67.76

.906 74.69

.875 72.42

9 9.625 - - - - - .342 33.90

- - .500 48.72

- - - -

10 10.75 .134 15.19

.165 18.70

.250 28.04

.307 34.24

.365 40.48

.365 40.48

.500 54.74

.593 64.33

.500 54.74

.718 76.93

.843 107.2

1.000 104.1

1.125 115.7

-

11 11.75 - - - - - .375 45.55

- - .500 60.07

- - - - -

12 12.75 .165 22.18

.180 24.20

.250 33.38

.330 43.77

.406 53.53

.375 49.56

.688 88.51

.562 73.16

.500 65.42

8.43 107.2

1.00 125.5

1.125 139.7

1.312 160.3

-

14 14.00 - .250 36.71

.312 45.68

.375 54.57

.437 63.37

.375 54.57

.750 106.1

.593 84.91

.500 72.09

.937 130.7

1.093 150.7

1.250 170.2

1.406 189.1

-

16 16.00 - .250 42.05

.312 45.68

.375 62.58

.500 82.77

.375 62.58

.843 136.5

.656 107.5

.500 82.77

1.031 164.80

1.218 192.3

1.437 223.5

1.592 245.1

-

18 18.00 - .250 47.30

.312 52.36

.437 82.06

.562 104.8

.375 70.59

.937 170.8

.750 138.2

.500 93.45

1.156 208.0

1.375 244.1

1.562 274.2

1.781 308.5

-

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Page 18: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 18

STANDARD PIPE SIZE Welded Stainless Steel Pipe for LINE PIPE Specification:

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

20 20.00 - .250 52.73

.375 78.60

.500 104.2

.593 122.9

.375 78.60

.812 166.4

1.031 208.9

.500 104.1

1.280 256.1

1.500 296.4

1.750 341.1

1.968 379.0

-

22 22.00 - .250 58.07

.375 86.61

.500 114.8

- .375 86.61

.875 197.4

1.125 250.8

.500 114.8

1.375 302.9

1.625 353.6

1.875 403.0

2.125 451.1

-

24 24.00 - .250 63.41

.375 94.62

.562 140.8

.688 171.2

.375 94.62

- - .500 125.5

1.531 367.4

1.182 429.4

2.062 483.1

2.343 541.9

-

26 26.00 - .312 85.60

.500 136.2

- - .375 102.6

- - .500 136.2

.750 202.3

1.000 267.0

1.256 330.4

1.500 392.5

2.000 512.6

28 28.00 - .312 92.36

.500 146.8

.625 182.7

- .375 110.6

- - .500 146.8

.750 218.3

1.000 288.4

1.250 357.1

1.500 424.5

2.000 555.4

30 30.00 - .312 98.93

.500 157.5

.625 196.1

- .375 118.6

- - .500 157.5

.750 234.3

1.00 331.1

1.250 383.8

1.500 456.6

2.000 598.1

32 32.00 - .312 105.6

.500 168.2

.625 209.4

- .375 126.7

- - .500 168.2

.750 250.3

1.000 331.1

1.250 410.6

1.500 486.6

2.000 640.8

34 34.00 - .312 112.3

.500 178.9

.625 222.8

- .375 134.7

- - .500 178.9

.750 266.3

1.000 352.4

1.250 437.2

1.500 520.7

2.000 683.5

36 36.00 - .312 118.9

.500 189.6

.625 236.1

- .375 142.7

- - .500 189.0

.875 328.2

1.000 373.8

1.250 463.9

1.500 552.7

2.000 726.2

42 42.00 - - - - - .375 166.7

- - .500 221.6

.750 330.4

1.000 437.9

1.250 544.0

1.500 648.8

2.000 854.4

48 48.00 - - - - - .375 190.7

.500 253.6

.750 378.5

1.000 502.0

1.250 624.1

1.500 744.9

2.000 982.6

PIPE

SIZE

O.D IN

INCHES

5

10

20

30

40

STD

60

80

XH

100

120

140

160

XXH

Formula to Find Weight Per Foot of All Plain End Pipe Weight

= (LB/FT)

O.D. Wall Thickness Wall Thickness { - } X 10.69 X (Inches) ( Inches ) ( Inches )

API PIPE SIZE

ASTM A312 TP316 Welded Stainless Steel Pipe ASTM A312 TP304 Welded Stainless Steel Pipe

Words painted on PIPE SURFACE

LIV – ASTM A312 TP316 Welded Stainless Steel Pipe Size 16 IN 406.4mm X S40 (12.70mm W.T) X 5.8M X 928.70Kg/Lgth B.E - USA

LIV – ASTM A312 TP304 Welded Stainless Steel Pipe Size 16 IN 406.4mm X S40 (12.70mm W.T) X 5.8M X 928.70Kg/Lgth B.E - USA

Page 19: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 19

STAINLESS STEEL

PIPE Chemical Compositon | Phyical Properties| Mechanical Properties | Other Properties

Chemical Composition Physical Properties Mechanical Properties Other Properties

Chemical Composition Equivalent

Specification % Chemical Composition Stainless Steel Grase Designation IS-6911 AISI C

Max Si

Max Mn Max Cr Ni

P

Max S

Max Other

Elements SS301 10 Cr 17 Ni 7 301 0.15 1.00 2.00 16.00/18.00 6.00/8.00 0.045 0.030 -

SS304 04 Cr 18 Ni 10 304 0.08 0.75 2.00 18.00/20.00 8.00/10.50 0.045 0.030 -

SS304L 02 Cr 18 Ni 11 304L 0.03 0.75 2.00 18.00/20.00 8.00/12.00 0.045 0.030 -

SS309 - 309 0.20 0.75 2.00 22.00/24.00 12.00/15.00 0.045 0.030 -

SS309S - 309S 0.08 0.75 2.00 22.00/24.00 12.00/15.00 0.045 0.030 -

SS310 - 310 0.25 1.50 2.00 24.00/26.00 19.00/22.00 0.045 0.030 -

SS310S - 310S 0.08 1.50 2.00 24.00/26.00 19.00/22.00 0.045 0.030 -

SS316 04 Cr 17 Ni

12 Mo 2

316 0.08 0.75 2.00 16.00/18.00 10.00/14.00 0.045 0.030 Mo 2.00/3.00

SS316L 02 Cr 17 Ni

12 Mo 2

316L 0.03 0.75 2.00 16.00/18.00 10.00/14.00 0.045 0.030 Mo 2.00/3.00

SS317 - 317 0.08 0.75 2.00 18.00/20.00 11.00/15.00 0.045 0.030 Mo 3.00/4.00

SS317L - 317L 0.03 0.75 2.00 18.00/20.00 11.00/15.00 0.045 0.030 Mo 3.00/4.00

SS321 04 Cr 18 Ni

10 Ti 2

321 0.08 0.75 2.00 17.00/19.00 9.00/12.00 0.045 0.030

Ti= 5X(C+N)

Max Min = 0.70

SS347 - 347 0.08 0.75 2.00 17.00/19.00 9.00/12.00 0.045 0.030

(Cb+Ta)= 10 X %C

Min 1.00 Max

SS409 - 409 0.08 1.00 1.00 10.50/11.75 0.50 Max 0.045 0.030

Ti 6 X %C

Min 0.75 Max

SS430 05 Cr 17 430 0.12 1.00 1.00 16.00/18.00 0.75 Max 0.040 0.030 -

SS434 - 434 0.12 1.00 1.00 16.00/18.00 - 0.040 0.030 Mo 0.75/1.25

SS410 12 Cr 13 410 0.15 1.00 1.00 11.50/13.50 0.75 Max 0.040 0.030 -

SS410S - 410S 0.08 1.00 1.00 11.50/13.50 - 0.040 0.030 -

SS420 20 Cr 13 30 Cr 13 40 Cr 13

420 ** 1.00 1.00 12.00/14.00 - 0.040 0.030 -

SS420 20 Cr 13 30 Cr 13 40 Cr 13

420 ** 1.00 1.00 12.00/14.00 - 0.040 0.030 -

Page 20: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 20

STAINLESS STEEL

PIPE Chemical Compositon | Phyical Properties| Mechanical Properties | Other Properties

Chemical Composition Physical Properties Mechanical Properties Other Properties

Physical Properties

Stainless Steel Grade Designation

Density gm/cm*cm*cm

Specific Electrical Resistance at 20degree Centigrade Micro-Ohm cm

Specific Heat(0-100 degree Centigrade) Joules/gm degree Centigrade

Thermal Conductivity 100 degree CentigradeW/m degree Centigrade

Coeff.of Thermal Expansion (Per degree Centigrade X 10-6) (0-100 degree Centigrade)

SS301 8.0 72 0.50 16.33 17.0 SS304 8.0 72 0.50 16.33 17.3

SS304L 8.0 72 0.50 16.33 17.3 SS309 8.0 78 0.50 14.24 15.0

SS309S 8.0 78 0.50 14.24 15.0 SS310 8.0 78 0.50 14.24 15.9

SS310S 8.0 78 0.50 14.24 15.9 SS316 8.0 74 0.50 16.33 15.9

SS316L 8.0 74 0.50 16.33 15.9 SS317 8.0 74 0.50 16.33 16.0

SS317L 8.0 74 0.49 16.33 14.4 SS321 8.0 72 0.50 16.33 16.6 SS347 8.0 73 0.50 16.33 16.6 SS409 7.7 60 0.46 25.12 11.7 SS430 7.8 60 0.46 25.95 10.4 SS434 7.8 60 0.46 25.95 11.9 SS410 7.8 57 0.46 25.12 9.9

SS410S 7.8 55 0.46 25.12 10.3

Page 21: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 21

STAINLESS STEEL

PIPE Chemical Compositon | Phyical Properties| Mechanical Properties | Other Properties

Chemical Composition Physical Properties Mechanical Properties Other Properties

Mechanical Properties Stainless

Steel Grade

Designation Condition

Uts N/mm2

Min.

0.2% Proof Street N/mm2

Min.

%Elongation on 50 mm

GL Min

Hardness RB Max.

SS301 Annealed 515 205 40 88 SS302 Annealed 515 205 40 92 SS304 Annealed 515 205 40 92

SS304L Annealed 485 170 40 88 SS309 Annealed 515 205 40 95

SS309S Annealed 515 205 40 95 SS310 Annealed 515 205 40 95

SS310S Annealed 515 205 40 95 SS316 Annealed 515 205 40 95

SS316L Annealed 485 170 40 95 SS317 Annealed 515 205 40 95

SS317L Annealed 515 205 40 95 SS321 Annealed 515 205 40 92 SS347 Annealed 515 205 40 92 SS409 Annealed 380 205 20 80 SS430 Annealed 450 205 22* 88 SS434 Annealed 530 365 23 83 SS410 Annealed 450 205 22* 95

SS410S Annealed 415 205 22* 88

Page 22: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 22

STAINLESS STEEL

PIPE Chemical Compositon | Phyical Properties| Mechanical Properties | Other Properties

Chemical Composition Physical Properties Mechanical Properties Other Properties

Other Properties Stainless Steel Grade Designation

Abrasion Resistance

Cold Forming (Drawing and Stamping) Weldability

Melting Temp.

Range degree Centigrade

Scaling Temp Degree

Centigrade

SS301 Good Good Excellent 1400-1420 800

SS304 Good Excellent Excellent 140-1450 900

SS304L Good Excellent Excellent 1400-1450 900

SS309 Good Good Good 1400-1450 1100

SS309S Good Good Excellent 1400-1450 1100

SS310 Good Good Good 1400-1450 1100

SS310S Good Good Excellent 1400-1450 1100

SS316 Good Good Excellent 1370-1400 900

SS316L Good Good Excellent 1370-1400 900

SS317 Good Good Excellent 1370-1400 870

SS317L Good Good Excellent 1425-1430 925

SS321 Good Good Excellent 1400-1430 900

SS347 Good Good Excellent 1400-1430 900

SS409 Good Fair Fair 1425-1510 700

SS410 Good Fair Fair 1480-1530 700

SS430 Good Fair Fair 1430-1510 800

SS434 Good Fair Fair 1430-1510 800

Page 23: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 23

Type 301 Stainless Steel

PIPE

Page 24: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 24

Type 302,304,304L,305 Stainless Steel

PIPE

Page 25: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 25

Type 316,316L Stainless Steel

PIPE

Page 26: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 26

Type 321 Stainless Steel

PIPE

Page 27: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 27

Type 17-7 Alloy Stainless Steel

PIPE

Page 28: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 28

Type 410 Stainless Steel

PIPE

Page 29: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 29

API 5CT-89 CASING AND TUBING (API 5 CT - 89 /API5CT-89)

Dimensions/Wall Thickness/Type of Finish/Plain Wt/Kgs Size

Designation Weight

Designation OD

Diameter Wall

Thickness Type of End Finish for Various Frades

Plain End Weight

mm in mm in H40 J55 K55 M65 N80 L80 P110 Kg/m lb/ft 9.50 4.500 5.210 0.224 P P P P - - - 14.02 9.41 4 ½ 10.50

114.3 4.500 5.690 0.205 - P P P - - - 15.24 10.24

11.50 5.590 0.220 - P P P - - - 16.74 11.24

13.00 6.430 0.253 - P P P - - - 19.12 12.84 15.00 7.520 0.296 - P P P P P P 22.16 14.88

5

18.00

127.00 5.000

9.190 0.362 - - - P P P P 26.70 17.95 14.00 6.200 0.244 P P P P - - - 20.41 13.71 15.50 6.980 0.275 - P P P - - - 22.85 15.36

17.00 7.720 0.304 - P P P P P P 25.13 16.89

20.00 9.170 0.361 - - - P P P P 29.52 19.83

5 ½

23.00

139.70 5.5000

10.540 0.415 - - P P P P 33.57 22.56

20.00 7.320 0.288 - P P P P P - 29.06 19.51

24.00 8.940 0.352 - P P P P P P 35.13 23.60 28.00 10.590 0.417 - - - P P P P 41.18 27.67

6 5/8

32.00

168.28 6.625

12.060 0.475 - - - P P P P 46.46 31.23

23.00 8.050 0.317 - P P P P P - 33.70 22.65 26.00 9.191 0.362 - P P P P P P 38.21 25.69 29.00 10.360 0.408 - - P P P P 42.78 28.75 32.00 11.510 0.453 - - P P P P 47.20 31.70 35.00 12.650 0.498 - - - P P P 51.52 34.61

7

38.00

177.8 7.000

13.720 0.540 - - - - P P P 55.52 37.29 26.40 8.330 0.300 - P P P P P - 38.08 25.59 29.70 9.520 0.328 - - P P P P 43.24 29.06 33.70 10.920 0.375 - - - P P P P 49.22 33.07

7 5/8

39.00

193.68 7.625

12.700 0.430 - - - - P P P 56.68 38.08 24.00 6.710 0.264 - P P P - - - 35.14 23.60 28.00 7.720 0.304 P - - P - - - 40.24 27.40 32.00 8.940 0.352 P P P P - - - 46.33 31.13

36.00 10.160 0.400 - P P P P P - 52.35 35.17

40.00 11.430 0.450 - - - P P P P 58.53 39.33

8 5/8

44.00

219.80 8.625

12.700 0.500 - - - - P P P 64.64 43.43

Page 30: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 30

36.00 8.940 0.352 P P P P - - - 51.93 34.89

40.00 10.030 0.395 - P P P P P - 57.99 38.97 43.50 11.050 .0435 - - - P P P P 63.61 42.73 47.00 11.990 0.472 - - - P P P P 68.75 46.18 53.50 13.840 0.545 - - - - P P P 78.72 52.90

9 5/8

58.40

244.48 9.625

15.110 0.595 - - - - P P P 85.47 57.44

32.75 7.090 0.279 P - - - - - - 46.50 31.23

40.50 8.890 0.350 P P P P - - - 57.91 38.91 45.50 10.160 0.400 - P P P - - - 65.87 44.26 51.00 11.430 0.450 - P P P P P P 73.75 49.55 55.50 12.570 0.495 - - - P P P P 80.75 54.26 60.70 13.840 0.545 - - - - - - P 88.47 59.45 65.70 15.110 0.595 - - - - - P P 96.12 64.59

10 3/4

47.00

273.05 10.750

9.530 0.375 - P P P - - - 69.94 45.60 54.00 11.050 0.435 - P P P - - - 78.32 52.62 60.00 12.420 0.489 - P P P P P P 87.61 58.87 11 3/4 65.00

298.45 11.750 13.560 0.534 - - - - P P P 95.27 64.03

48.00 8.380 0.330 P - - - - - - 68.48 46.02 54.50 9.560 0.380 - P P P - - - 78.55 52.79

61.00 10.920 0.430 - P P P - - - 88.55 59.50

13 3/8

68.00

339.72 13.375

12.190 0.480 - P P P P P P 98.46 66.17

Page 31: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 31

API 5CT-89 CASING AND TUBING (API 5 CT - 89 /API5CT-89)

1. Chemical composition

Grade

Mfg. Proce Mfg.

Process ss

C Si Mn P S Ni Cr Mo Others

H-40 S,E - - - 0.030Max 0.030Max - - - - J-55 S,E - - - 0.030Max 0.030Max - - - - K-55 S,E - - - 0.030Max 0.030Max - - - - N-80 S,E - - - 0.030Max 0.030Max - - - -

C-75-1 S,E 0.50Max 0.45Max 1.90Max 0.030Max 0.030Max 0.50Max 0.50Max 0.15~0.40 Cu 0.50Max

C-75-2 S,E 0.43Max 0.45Max 1.90Max 0.030Max 0.030Max - - - - C-75-3 S,E 0.38Max - 0.75~1.00 0.030Max 0.030Max - 0.80~1.10 0.15~0.25 -

C-75-9Cr S 0.15Max 1.00Max 0.30~0.60 0.20Max 0.010Max 0.50Max 8.00~10.0 0.90~1.10 Cu 0.25Max

C-75-13Cr S 0.15~0.22 1.00Max 0.25~1.00 0.20Max 0.010Max 0.50Max 12.0~14.0 - Cu 0.25Max

L-80-1 S,E 0.43Max 0.45Max 1.90Max 0.030Max 0.030Max 0.25Max - - Cu

0.35Max

L-80-9Cr S 0.15Max 1.00Max 0.30~0.60 0.20Max 0.010Max 0.50Max 8.00~10.00 0.90~1.10 Cu 0.25Max

L-80-13Cr S 0.15~0.22 1.00Max 0.25~1.00 0.20Max 0.010Max 0.50Max 12.0~14.0 - Cu 0.25Max

C-90-1 S 0.35Max - 1.00Max 0.20Max 0.010Max 0.99Max 1.20Max 0.75Max - C-90-2 S 0.50Max - 1.90Max 0.030Max 0.010Max 0.99Max No Limit No Limit - C-95 SpE 0.45Max 0.45Max 1.90Max 0.030Max 0.030Max - - - -

T-95-1 S 0.35Max - 1.20Max 0.20Max 0.010Max 0.99Max 0.40~1.50 0.25~0.85 - T-95-2 S 0.50Max - 1.90Max 0.030Max 0.010Max 0.99Max - - - P-105 S - - - 0.030Max 0.030Max - - - - P-110 S - - - 0.030Max 0.030Max - - - -

Q-125-1 S,E 0.35Max - 1.00Max 0.20Max 0.010Max 0.99Max 1.20Max 0.75Max - Q-125-2 S,E 0.35Max - 1.00Max 0.20Max 0.20Max 0.99Max No Limit No Limit - Q-125-3 S,E 0.50Max - 1.90Max 0.20Max 0.20Max 0.99Max No Limit No Limit - Q-125-4 S,E 0.50Max - 1.90Max 0.030Max 0.20Max 0.99Max No Limit No Limit -

Page 32: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 32

API 5CT-89 CASING AND TUBING (API 5 CT - 89 /API5CT-89)

1. Chemical composition Tensile Test MPa or N/mm2 Grade

Min Yield point Tensile Strength Remaks

(Similar to JIS) Possibility Temperature

H-40 276~552 414Min - J-55 379~552 517Min - K-55 379~552 655Min - N-80 552~758 689Min -

C-75-1 517~620 655Min - C-75-2 517~620 655Min - C-75-3 517~620 655Min -

C-75-9Cr 517~620 655Min - C-75-13Cr 517~620 655Min -

L-80-1 552~655 655Min - L-80-9Cr 552~655 655Min -

L-80-13Cr 552~655 655Min - C-90-1 620~724 690Min - C-90-2 620~724 690Min - C-95 655~758 724Min -

T-95-1 655~758 724Min - T-95-2 655~758 724Min - P-105 724~931 827Min - P-110 758~965 862Min -

Q-125-1 860~1035 930Min - Q-125-2 860~1035 930Min - Q-125-3 860~1035 930Min - Q-125-4 860~1035 930Min -

Page 33: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 33

SPECIFICATION OF CASING N TUBING API 5CT CASING AND TUBING

(H-40/J-55/K-55/N-80/C-75-1/C-75-2/C-75-3/C-75-9Cr/C-75-13Cr/L-80-1/L-80-9Cr/L-80-13Cr/C-90-1)

API 5D DRILL PIPE (E-75/X-95/G-105/S-135/E-75/X-95/G-105/S-135 )

API 5L Line Pipe A25C1 Ⅰ A25C1 Ⅱ A B X42(Non-expanded) X42(Cold expanded) X46(Non expanded) X46(Cold expanded) API 2B - Structural Steel Pipe API 1B - Oil Field V-Belting API 2C - Offshore Cranes API 2F - Mooring Chain API 2H - Carbon Manganese Steel Plate for Offshore Platform Tubular Joints API 2MT1 - As-Rolled Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures API 2MT2 - Rolled Shapes with Improved Notch Toughness API 2W - Steel Plates for Offshore Structures by Thermo-Mechanical Control Processing(TMCP) API 2Y - SteelPlates, Quenched and Tempered, for Offshore Structures API 4F - Drilling and Well Servicing Structures API 5B - Threading, Gaging, and Thread Inspection of Casing, Tubing and Line Pipe Threads API 5LC - CRA Line Pipe API 5LCP - Coiled Line Pipe API 5LD - Clad or Lined Steel Pipe API 600 - Bolted Bonnet Steel Gate Valves API 6A - Wellhead and Christmas Tree Equipment API 6AV1 - Verification Test of Wellhead SSV and USV for Offshore Structures API 6D - Pipeline Valves (Steel Gate, Plug , Ball, and Check Valves API 6H - End Closures, Connectors and Swivels API 7 - Rotary Drill Stem Elements API 7F - Oil Field Chain and Sprockets

Page 34: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 34

API 7K - Drilling and Well Servicing Equipment API 8A - Drilling and Production Hoisting Equipment API 8C - Drilling and Production Hoisting Equipment (PSL1 and PSL2) -Part1 API 8C - Drilling and Production Hoisting Equipment (PSL1 and PSL2) -Part2 API 9A - Wire Rope API 10A - Cements and Materials for Well Cementing API 10D - Bow Spring Casing Centralizers API 11AX - Subsurface Sucker Rod Pumps and Fittings API 11B - Sucker Rods API 11D1 - Downhole Equipment - Packers and Bridge Plugs API 11E - Pumping Units API 11IW - Independent Wellhead Equipment API 11L6 - Electric Motor Prime Mover for Beam Pumping Unit Service API 11N - Lease Automatic Custody Transfer (LACT) Equipment API 11P - Package Reciprocating Compressors for Oil and Gas Production Services API 11V1 - Gas Lift Equipment API 12B - Bolted Tanks for Storage of Production Liquids API 12D - Field Welded Tanks for Storage of Production Liquids API 12F - Shop Welded Tanks for Storage of Production Liquids API 12GDU - Glycol-Type Gas Dehydration Treaters API 12J - Oil and Gas Separators API 12K - Indirect Type Oilfield Heaters API 12L - Vertical and Horizontal Emulsion Treaters API 12P - Fiberglass Reinforced Plastic Tanks API 13A - Oil Well Drilling Fluid Materials API 14A - Subsurface Safety Valve Equipment API 14L - Lock Mandrels and Landing Nipples API 15HR - High Pressure Fiberglass Line Pipe API 15LE - Polyethylene Line Pipe (PE PIPE) API 15LR - Low Pressure Fiberglass Line Pipe API 15LT - PVC Lined Steel Tubular Goods API 16A - Drill Through Equipment API 16C - Choke and Kill Systems API 16D - Cntral Systems for Drilling Well Control Equipment API 16R - Marine Drilling Rser Couplings API 17D - Subsea Wellhead and Christmas Tree Equipment API 17D - Mudline Suspension System Equipment API 17D - Subsea Tree Equipment API 17D - Subsea Wellhead Equipment API 17D - Other Equipment API 17E - Subsea Production Control Umbilicals API 17J - Unbonded Flexible Pipe

Page 35: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 35

API 17K - Bonded Flexible Pipe API 1581 - Aviation Jet Fuel Filter / Separators API 1583 - Aviation Fuel Filter Monitors with Absorbent Type Elements API TPCP1 - Certified Courses API Recommended Practice 19B - Registration of Well Perforator Designs

Page 36: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 36

ERW Welded N Seamless Carbon Steel

PIPE ASTM A53 Gr. A/B, ASTM API 5L, ASTM

A106,ASTM A252

table below can be used to compare different British (BSi) and American (ASTM) piping standards.

ASTM International BSi - British Standards institute Material

A120 1387 (BS EN 10255:2004) Carbon Steel

A53 Gr. A 3601/320 Carbon Steel

A53 Gr. B 3601/410 Carbon Steel

A106 Gr. A 3602/360 Carbon Steel

A106 Gr. B 3602/410 Carbon Steel

A333 Gr. 3 3603/503 Killed Carbon Steel

A333 Gr. 6 3603/410

A333 Gr. 8 3603/590 3.5% nickel

API 5L Gr. A 3601/23 Carbon Steel

API 5L Gr. B 3601/27 Carbon Steel

A335 Gr. P5 3604/625 5% Cr 1/2% Mo

A335 Br. P9 3604/629 9% Cr 1% Mo

A335 Gr. P11 3604/621 1 1/4% Cr 1/2% Mo

A335 Gr. P12 3604/620 1% Cr 1/2% Mo

A335 Gr. P22 3604/622 2 1/4% Cr 1% No

A312 Gr. Tp 304 3605/304 S18 (EN58E) Austenitic chromium nickel

Page 37: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 37

A312 Gr. Tp 304H 3605/304 S59 Austenitic chromium nickel

A312 Gr. Tp 304L 3605/304 S14 Austenitic chromium nickel (extra low carbon)

A312 Gr. Tp 316 3605/316 S18 (EN58J) Austenitic chromium nickel molybdenum bearing

A312 Gr.Tp 316L 3605/316 S14 Austenitic chromium nickel

molybdenum bearing (extra low carbon)

A312 Gr. Tp 321 3605/321 S18 (EN58B) Austenitic chromium nickel

titanium stabilized

A312 Gr. Tp 347 3605/347 S18 (EN58G) Austenitic chromium nickel nobelium stabilized

Page 38: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 38

Type 304,304L,316,316L Stainless Steel

PIPE

PRODUCT INTRODUCTION

stainless steel pipe in term of GB/T 12770-2002、GB/T 12771-2000 China Nation standard produce full craftwork. To

supply the user with standard "HG","ASTM" or"JIS", in the meanwhile carry on the order of NONSTD and special medium specifications.

thick mm diameter mm 0.5 0.8 1.0 1.2 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10 12 14 16 18 20 25 30

19 31.8 114 159 168 219 250 273 323.9 325 355.6 377 406.4 426 457.2 478 500 508 530 550 558.8 600 609.6 630 720 820 1220

Page 39: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 39

Steel Pipe Specification 1

• A 333 - Seamless and Welded Pipe for Low-Temperature Service • A 53 - Welded and Seamless Steel Pipe • A 106 - Seamless C-Steel Pipe for High Temperature Service • A 335 - Seamless Ferritic Alloy Steel Pipe for High Temperature Service • A 312 - Seamless and Welded Austenitic Stainless Steel Pipe • API 5L - Specification for Line Pipe

• BS 1387 - Steel Tubes and Tubulars Suitable for Screwing to Bs 21 Pipe Threads - Replaced by BS EN 10255:2004 Non-alloy steel tubes suitable for welding or threading. Technical delivery conditions

• BS 3601 - Steel Pipes and Tubes for Pressure Purposes Carbon Steel with Specified Room Temperature Properties - Replaced by BS EN 10216-1:2002 Seamless tubes for pressure purposes - Non-alloy steel tubes with specified room temperature properties, BS EN 10217-1:2002 Welded steel tubes for pressure purposes - Non-alloy steel tubes with specified room temperature properties

• BS 3602 PART1 - Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese Steel with Specified Elevated Temperature Properties - Replaced by BS EN 10216-2:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties

• BS 3602 PART2 - Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese Steel with Specified Elevated Temperature Properties - Replaced by BS EN 10216-2:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties

• BS 3603 - Steel Pipes and Tubes for Pressure Purposes Carbon and Alloy Steel with Specified Low Temperature Properties - Replaced by EN10216-4:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions

• BS 3604 - Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes

• BS 3605 PART1 - Seamless and Welded Austentic Stainless Steel Pipe and Tubes for Pressure Purposes - Replaced by BS EN 10216-5:2004 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes

Page 40: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 40

Steel Pipe Specification 2

Steel Pipes

• A53 - A53/A53M-99b - Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless • A74 - A74-98 - Specification for Cast Iron Soil Pipe and Fittings • A106 - A106-99e1 - Specification for Seamless Carbon Steel Pipe for High-Temperature Service • A126 - A126-95e1 - Specification for Grey Iron Castings for Valves, Flanges, and Pipe Fittings • A134 - A134-96 - Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) • A135 - A135-97c - Specification for Electric-Resistance-Welded Steel Pipe • A139 - A139-96e1 - Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) • A182 - A182/A182M-99 - Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and

Valves and Parts for High-Temperature Service • A252 - A252-98 - Specification for Welded and Seamless Steel Pipe Piles • A312 - A312/A312M-00 - Specification for Seamless and Welded Austenitic Stainless Steel Pipes • A333 - A333/A333M-99 - Specification for Seamless and Welded Steel Pipe for Low-Temperature Service • A335 - A335/A335M-99 - Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service • A338 - A338-84 (1998) - Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad,

Marine, and Other Heavy Duty Service at Temperatures Up to 650�F (345�C) • A358 - A358/A358M-98 - Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe

for High-Temperature Service • A369 - A369/A369M-92 - Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-

Temperature Service • A376 - A376/A376M-98 - Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station

Service • A377 - A377-99 - Index of Specifications for Ductile-Iron Pressure Pipe • A409 - A409/A409M-95ae1 - Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or

High-Temperature Service • A426 - A426-92 (1997) - Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature

Service • A451 - A451-93 (1997) - Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service • A523 - A523-96 - Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-

Pressure Pipe-Type Cable Circuits • A524 - A524-96 - Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures • A530 - A530/A530M-99 - Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe • A648 - A648-95e1 - Specification for Steel Wire, Hard Drawn for Pre-stressing Concrete Pipe • A674 - A674-95 - Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids • A691 - A691-98 - Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure

Service at High Temperatures • A694 - A694/A694M-00 - Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves,

and Parts for High-Pressure Transmission Service • A716 - A716-99 - Specification for Ductile Iron Culvert Pipe • A733 - A733-99 - Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe

Nipples • A742 - A742/A742M-98 - Specification for Steel Sheet, Metallic Coated and Polymer Pre-coated for Corrugated

Steel Pipe • A746 - A746-99 - Specification for Ductile Iron Gravity Sewer Pipe • A760 - A760/A760M-99 - Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains • A761 - A761/A761M-98 - Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe,

Pipe-Arches, and Arches • A762 - A762/A762M-98 - Specification for Corrugated Steel Pipe, Polymer Pre-coated for Sewers and Drains • A790 - A790/A790M-99 - Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe • A796 - A796/A796M-99 - Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for

Page 41: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 41

Storm and Sanitary Sewers and Other Buried Applications • A798 - A798/A798M-97a - Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other

Applications • A807 - A807/A807M-97 - Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other

Applications • A810 - A810-94 - Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh • A813 - A813/A813M-95e2 - Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe • A814 - A814/A814M-96 (1998) - Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe • A849 - A849-99 - Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and

Drainage Pipe • A861 - A861-94e1 - Specification for High-Silicon Iron Pipe and Fittings • A862 - A862/A862M-98 - Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage

Pipe • A865 - A865-97 - Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or

Seamless, for Use in Steel Pipe Joints • A872 - A872-91 (1997) - Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive

Environments • A885 - A885/A885M-96 - Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for

Corrugated Steel Sewer, Culvert, and Underdrain Pipe • A888 - A888-98e1 - Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain,

Waste, and Vent Piping Applications • A926 - A926-97 - Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated

Metal Pipe • A928 - A928/A928M-98 - Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion

Welded with Addition of Filler Metal • A929 - A929/A929M-97 - Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated

Steel Pipe • A930 - A930-99 - Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm

Sewers, and Other Buried Conduits • A943 - A943/A943M-95e1 - Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes • A949 - A949/A949M-95e1 - Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe • A954 - A954-96 - Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe • A972 - A972/A972M-99 - Specification for Fusion Bonded Epoxy-Coated Pipe Piles • A978 - A978/A978M-97 - Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for

Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications • A984 - A984/A984M-00 - Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded • A998 - A998/A998M-98 - Practice for Structural Design of Reinforcements for Fittings in Factory-Made

Corrugated Steel Pipe for Sewers and Other Applications • A999 - A999/A999M-98 - Specification for General Requirements for Alloy and Stainless Steel Pipe • A1005 - A1005/A1005M-00 - Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam,

Double Submerged-Arc Welded

A1006 - A1006/A1006M-00 - Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

Page 42: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 42

Steel Pipe Specification 3

Steel Tubes Superheater, Boiler and Miscellaneous Tubes: A178 - A178/A178M-95 - Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes A179 - A179/A179M-90a (1996) e1 - Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes A192 - A192/A192M-91 (1996) e1 - Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service A209 - A209/A209M-98 - Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes A210 - A210/A210M-96 - Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes A213 - A213/A213M-99a - Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes A249 - A249/A249M-98e1 - Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes A250 - A250/A250M-95 - Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes A254 - A254-97 - Specification for Copper-Brazed Steel Tubing A268 - A268/A268M-96 - Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service A269 - A269-98 - Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service A270 - A270-98ae1 - Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing A334 - A334/A334M-99 - Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service A423 - A423/A423M-95 - Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes A450 - A450/A450M-96a - Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes A608 - A608-91a (1998) - Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures A618 - A618-99 - Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing A632 - A632-98 - Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service A688 - A688/A688M-98 - Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes A771 - A771/A771M-95 - Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components A778 - A778-98 - Specification for Welded, Unanneled Austenitic Stainless Steel Tubular Products A789 - A789/A789M-00 - Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service A803 - A803/A803M-98 - Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes A822 - A822-90 (1995) e1 - Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service A826 - A826/A826M-95 - Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components A847 - A847-99a - Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance A908 - A908-91 (1998) - Specification for Stainless Steel Needle Tubing A953 - A953-96 - Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing -

Page 43: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 43

Steel Pipe Specification 4

Heat-Exchanger and Condenser Tubes

• A179 - A179/A179M-90a (1996) e1 - Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

• A213 - A213/A213M-99a - Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

• A214 - A214/A214M-96 - Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

• A249 - A249/A249M-98e1 - Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

• A498 - A498-98 - Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins

• A851 - A851-96 - Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes -

Steel Pipe Specification 5

Structural Tubing

• A500 - A500-99 - Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

• A501 - A501-99 - Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

• A847 - A847-99a - Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

• A618 - A618-99 - Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing -

Page 44: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 44

Steel Pipe Specification 6

Mechanical Tubing

• A511 - A511-96 - Specification for Seamless Stainless Steel Mechanical Tubing • A512 - A512-96 - Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing • A513 - A513-98 - Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical

Tubing • A519 - A519-96 - Specification for Seamless Carbon and Alloy Steel Mechanical Tubing • A554 - A554-98e1 - Specification for Welded Stainless Steel Mechanical Tubing -

Page 45: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 45

Steel Pipe Specification

Pipe World Standards 1. API STD

API(American Petroleum Institute) API 5L Line Pipe API 5CT CASING AND TUBING API 5D DRILL PIPE

Page 46: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 46

Steel Pipe Specification

Pipe World Standards 2. BS STD

BS(British Standards) BS534 / Steel Pepes Fittings and Specials for Water and Gas and Sewage BS778 / Steel Pipes and Joints for Hydraulic Purposes BS879 / Steel Pipes and Joints for Hydraulic Purposes (HFS27/HFS35/ERW27/ERW26/HFS27/HFS35/ERW27/ERW26) BS1139 / Tubes for Use in Scaffolding BS1387 / Steel Tubes and Tubulars Suitable for Screwing to BS21 Pipe Threads (DN15/DN20/DN25/DN32/DN40/DN50/DN65/DN80/DN100/DN125/DN150/DN15/DN20/DN25/DN32/DN40) BS1717 / Steel Tubes for Cycle and Motor Cycle Purposes (CFSC3/CFSC4/CFSC6/ERWC1/ERWC2/ERWC3/ERWC5/CRWC1/CRWC2/CRWC3/CFSC3/C4) BS1864 / Stainless Steel Milk Pipes and Fittings (Gr.1/Gr.2/Gr.3/Gr.4/Gr.5/Gr.6/Gr.7/Gr.8/Gr.9/Gr.1/Gr.2/Gr.3/Gr.4/Gr.5/Gr.6/Gr.7/Gr.8/Gr.9) BS3059 PART1 / Steel Boiler and Superheater Tubes (HFS320/CFS320/ERW320/CEW320/HFS320/CFS320/ERW320/CEW320) BS3059 PART2 / Steel Boiler and Superheater Tubes (S1 360/S2 360/ERW360/CEW360/S1440/S2 440/ERW440/CEW440/S1 243/S2 243/ERW243/CEW243/ERW620) BS3600 / Dimensions and Masses Per Unit Length of Welded and Seamless Steel Pipes and for Pressure Purposes BS3601 / Steel Pipes and Tubes for Pressure Purposes Carbon Steel with Specified Room Temperature Properties (BW320/ERW320/ERW360/ERW430/S360/S430/SAW430/BW320/ERW320) BS3602 PART1 / Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese Steel with Specified Elevated Temperature Properties (HGS360/CFS360/CEW360/HFS430/CFS430/) BS3602 PART2 / Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese Steel with Specified Elevated Temperature Properties (SAW410/SAW460/SAW410/SAW460) BS3603 / Steel Pipes and Tubes for Pressure Purposes Carbon and Alloy Steel with Specified Low Temperature Properties (HFS410LT50/CFS410LT50/ERW410LT50) BS3604 / Steel Pipes and Tubes for Pressure Purposes Ferritic Alloy Steel with Specified Elevated Temperature Properties(JFS620-460/CFS620-460/ERW620-460/CEW620-460/HFS620-440/CFS620-440) BS3605 PART1 / Seamless and Welded Austentic Stainless Steel Pipe and Tubes for Pressure Purposes(Seamless Pipes With Specified Room Temperature Preperties) BS3605 PART2 / Seamless and Welded Austentic Stainless Steel Pipe and Tubes for Pressure Purposes (Welded Pipes With Specified Room Temperature Properties) BS3606 / Steel Tubes for Heat Exchangers (ERW320/CEW320/CFS320/ERW440/CEW440/CFS440/ERW243) BS4127 / Light Gauge Stainless Steel Tubes(Round Pipe) BS4825 / Pipes and Fittings for the Food Industry BS5242 PART1 / Tubes for Fluid Power Cylinder Barrels (HP1/HP2/HP3/HP4/HP4/HP6/HP1/HP2/) BS5242 PART2 / Tubes for Fluid Power Cylinder Barrels (HP1/HP2/HP3/HP4/HP4/HP6/HP1) BS5242 PART3 / Tubes for Fluid Power Cylinder Barrels(for Mining)(HP1/HP2/HP3/HP4) BS6323 PART2 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose (Hot finished welded steel tubes) BS6323 PART2 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose(Hot finished welded steel tubes) (Square.Rectangular Pipe) BS6323 PART3 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Puropese (Hot finished seamless steel tube) BS6323 PART4 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose (Cold finished seamless tubes) BS6323 PART5 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose (Electric resistanced welded(including induction welded)steel tubes) BS6323 PART5 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose (Electric resistanced welded(including induction welded)steel tubes) BS6323 PART6 / Seamless and Welded steel Tubes for Automobile Mechanical adn General Engineer Purpose (Cold finished electric resistance welded (including induction welded) steel tubes) BS6323 PART6 / Seamless and Welded steel Tubes for Automobile Mechanical adn General Engineer Purpose (Cold finished electric resistance welded (including induction welded) steel tubes) BS6323 PART7 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose (Submerged arc welded steel tubes) BS6323 PART8 / Seamless and Welded Steel Tubes for Automobile Mechanical and General Engineer Purpose(Longitudinally welded stainless steel tubes) BS6323 PART8 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Page 47: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 47

Engineer Purpose(Longitudinally welded stainless steel tubes) BS6363 / Welded Cold Formed Steel Structural Hollow(34/26 / 43/36 / 50/45 /34/26 / 43/36 / 50/45) BS7416 / Precision Finished Seamless Cold Drawn low Carbon Steel Tubes for Use in Hydraulic Fluid Power Systems

Page 48: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 48

Steel Pipe Specification

Pipe World Standards 3. ASTM STD

ASTM(ASTM International) ASTM A53 / ASME SA53 / Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A106 / ASME SA106 / Seamless Carbon Steel Pipe for High Temperature Service ASTM A134 / ASME SA134 / Pipe Steel Electric Fusion(ARC) Welded(Sizes Nps 16 and Over)1 ASTM A135 / ASME SA135 / Pipe Steel Electric Fusion(ARC) Welded ASTM A139 / ASME SA139 / Electric Resistance Welded Steel Pipe ASTM A161 / ASME SA161/ Seamless Low Carbon And Cardon Molybdenum Steel Still Tubes For Refinery Service ASTM A178 / ASME SA178 / Electric Resistance Welded Carbon Steel Boiler Tubes ASTM A179 / Seamless Cold Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes ASTM A192 / ASME SA192 / Seamless Carbon Steel Boiler Tubes for High Pressure Service ASTM A199 / ASME SA199 / Seamless Cold Drawn Intermediate Alloy Steel Heat Exchanger and Condenser Tubes ASTM A200 / ASME SA200 / Seamless Intermediate Alloy Steel Still Tubes for Refinery Service ASTM A209 / ASME SA209 / Seamless Carbon Molybdenum Alloy Steel Boiler and Superheater Tubes ASTM A210 / ASME SA210 / Seamless Medium Carbon Steel Boiler and Superheater Tubes ASTM A211 / ASME SA211 / Spiral Welded Steel or Iron Pipe ASTM A213 / ASME SA213 / Seamless Ferritic and Austenitic Alloy Steel Boiler Superheater and Heat Exchanger Tubes ASTM A214 / ASME SA214 / Electric Resistance Welded Carbon Steel Heat Exchanger and Condenser Tubes ASTM A216 / ASME SA216 / Carbon Steel Castings Suitable for Fusion for High Temperature Service ASTM A226 / ASME SA226 / Electric Resistance Welded Carbon Steel Boiler and Superheater Tubes for High Pressure Service ASTM A249 / ASME SA249 / Welded Austentic Steel Boiler Superheater Heat Exchanger and Condenser Tubes ASTM A250 / ASME SA250 / Electric Resistance Welded Carbon Molybdenum Alloy Steel Boiler and Superheater Tubes ASTM A252 / ASME SA252 / Welded and Seamless Steel Pipe Piles ASTM A254 / ASME SA254 / Copper Brazed Steel Tubing ASTM A268 / ASME SA268 / Seamless and Welded Ferritic Stainless Steel Tubing For General Service ASTM A269 / ASME SA269 / Seamless and Welded Austenitic Stainless Steel Tubing for General Service ASTM A270 / ASME SA270 / Seamless and Welded Austenitic Stainless Steel Sanitary Tubing ASTM A271 / ASME SA271 / Seamless Austenitic Chromium Nickel Steel Still Tubes for Refinery Service ASTM A312 / ASME SA312 / Seamless and Welded Austenitic Stainless Steel Pipe ASTM A333 / ASME SA333 / Seamless and Welded Steel Pipe for Low Temperature Service ASTM A334 /ASME SA334 / Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service ASTM A335 / ASME SA335 / Seamless Ferritic Alloy Steel Pipe for High Temperature Service ASTM A358 / ASME SA358 / Electric Fusion Welded Austenitic Chromium Nickel Alloy Steel Pipe for High Temperature Service1 ASTM A369 / ASME SA369 / Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High Temperature Service ASTM A376 / ASME SA376 / Seamless Austenitic Steel Pipe for High Temperature Central Station Service ASTM A381 / ASME SA381 / Metal Arc Welded Steel Pipe for USE with High Pressure Transmission Systems ASTM A405 / ASME SA405 / Seamless Ferritic Alloy Stlle Pipe Specially Heat Treated for High Temperature Service ASTM A409 / ASME SA409 / Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service ASTM A422 / ASME SA422 / Butt Welds in Still Tubes for Refinery Service ASTM A423 / ASME SA423 / Seamless and Electric Welded Low Alloy Steel Tubes ASTM A426 / ASME SA426 / Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High Temperature Service1 ASTM A430 / ASME SA430 / Austentic Steel Forged and Bored Pipe for High Temperature Service ASTM A450 / ASME SA450 / General Requirements for Carbon Ferritic Alloy and Austentic Alloy Steel Tubes1 ASTM A451 / ASME SA451 / Centrifugally Cast Austenific Steel Pipe for High Temperature Service1 ASTM A452 / ASME SA452 / Centrifugally Cast Austenitic Steel Cold Wrought Pipe for High Temperature Service ASTM A498 / ASME SA498 / Seamless and Welded Carbon Ferritic and Austenitic Alloy Steel Heat-Exchanger Tubes With Integral Fins1 ASTM A500 / ASME SA500 / Cold Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes(Round Pipe) ASTM A500 / ASME SA500 / Cold Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes(Square . Rectangular pipe) ASTM A501 / ASME SA501 / Hot Formed Welded and Seamless Carbon Steel Structural Tubing ASTM A511 / ASME SA511 / Seamless Stainless Steel Mechanical Tubing

Page 49: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 49

ASTM A512 / ASME SA512 / Cold Drawn Buttweld Carbon Steel Machanical Tubing ASTM A513 / ASME SA513 / Electric Resistance Welded Carbon and Alloy Steel Mechanical Tubing ASTM A519 / ASME SA519 / Seamless Carbon and Alloy Steel Mechanical Tubing ASTM A520 / ASME SA520 / Supplementary Requirements for Seamless and Electric Resistance Welded Carbon Steel Tubular Products for High-Tmeperature Service Conformigf to ISO Recommendations for Boiler Construction1 ASTM A523 / ASME SA523 / Plain end Seamless and Electric Resistance Welded Steel Pipe for High Pressure Pipe Type Cable Circuits ASTM A524 / ASME SA524 / Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures ASTM A530 / ASME SA530 / Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe1 ASTM A539 / ASME SA539 / Electric Resistance Welded Coiled Steel Tubing for Gas and Fuel Oil Lines ASTM A554 / ASME SA554 / Welded Stainless Steel Mechanical Tubing(Round Pipe) ASTM A554 / ASME SA554 / Welded Stainless Steel Mechanical Tubing(Square . Rectangular pipe) ASTM A556 / ASME SA556 / Seamless Cold Drawn Carbon Steel Feedwater Heater Tubes ASTM A557 / ASME SA557 / Electric Resistance Welded Carbon Steel Feedwater Heater Tubes ASTM A587 / ASME SA587 / Electric Welded Low Carbon Steel Pipe for the Chemical Industry ASTM A589 / ASME SA589 / Seamless and Welded Carbon Steel Water Well Pipe ASTM A595 / ASME SA595 / Steel Tubes Low Carbon Tapered for Structural Use ASTM A608 / ASME SA608 / Centrifuhally Cast Iron Chromium Nickel High Alloy Tubing for Pressure Application at High Temperature ASTM A618 / ASME SA618 / Hot Formed Welded and Seamless High Strength Low Alloy Structural Tubing ASTM A632 / ASME SA632 / Seamless and Welded Austenitic Stainless Steel Tubing(Small Diameter)for General Service ASTM A660 / ASME SA660 / Centrifugally Cast Carbon Steel Pipe for High Temperature Service ASTM A671 / ASME SA671 / Electric Fusion Welded Steel Pipe for Atmospheric and Lower Temperature ASTM A672 / ASME SA672 / Electric Fusion Welded Steel Pipe for High Pressure Service at Moderate Temperatures ASTM A688 / ASME SA688 / Welded Austenitic Stainless Steel Feedwater Heater Tube ASTM A691/ ASME SA691 / Carbon And Alloy Steel Pipe Electric Fusion Welded for High Pressure Service at High Tempeeratures ASTM A692 / ASME SA692 / Seamless Medium Strength Carbon Molybdenum ASTM A714 / ASME SA714 / High Strength Low Alloy Welded and Seamless Steel Pipe ASTM A727 / ASME SA727 Forgings, Carbon Steel, for piping components with Inherent Notch Toughness¹ ASTM A731 / ASME SA731 / Seamless and Welded Ferritic Stainless Steel Pipe ASTM A733 / ASME SA733 / Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Niples1 ASTM A771 / ASME SA771 / Austenitic Stainless Steel Tubing for Breeder Reactor Core Components ASTM A778 / ASME SA778 / Welded Unannealed Austenitic Stainless Tubluar Products ASTM A787 / ASME SA787 / Standard Specification for Electric Resistance Welded Metallic Coated Carbon Steel Mechanical Tubing1 ASTM A789 / ASME SA789 / Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe for General Service ASTM A790 / ASME SA790 / Welded Unannealed Ferritic Stainless Steel Tubing ASTM A791 / ASME SA791 / Welded Unannealde Ferritic Stainless Steel Tubing ASTM A795 / ASME SA795 / Black and Hot-Dipped Zinc Coated(Galvanized) Welded and Seamless Steel Pipe for Fire Protection USE1 ASTM A803 / ASME SA803 / Welded Ferritic Stainless Steel Feed Water Heater Tubes ASTM A813 / ASME SA813 / Single or Double Welded Austentic Stainless Steel Pipe ASTM A814 / ASME SA814 / Cold Worked Welded Austenitic Stainless Steel Pipe ASTM A822 / ASME SA822 / Seamless Cold Dram Carbon Steel Tubing For Hydraulic System Service ASTM A826 /ASME SA826 / Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder Reactor Core Components ASTM A847 / ASME SA847 / Cold Formed Welded and Seamless High Strength Low Alloy Structural Tubing With Improved Atmospheric Corrosion Resistance ASTM A851 / ASME SA851 / High Frequency Induction Welded Unannealed Austenitic Steel Condenser Tubes ASTM A865 / ASME SA865 / Threaded Couplings Steel Black or Zinc Coated(Galvanized) Welded or Seamless for Use in Steel Pipe Joints1 ASTM A872 / ASME SA872 / Centrifugally Cast Ferrific/Austenitic Stainless Steel Pipe for Corrosive Environments ASTM A908 / ASME SA908 / Stainless Steel Needile Tubing1 ASTM B~ / ASME SB~ ASTM B111 / ASME SB111 / Copper and Copper Alloy Seamless Condenser Tubes and Ferrule ASTM B161 / ASME SB161 / Nickel Seamless Pipe and Tube ASTM B163 / ASME SB163 / Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes ASTM B165 / ASME SB165 / Nickel Copper Alloy(UNS N04400) Seamless Pipe and Tube ASTM B167 / ASME SB167 / Nckel-Chromium-Iron Alloys(UNS N06600, N06601, N06690, AND N06045) Seamless Pipe and Tube ASTM B210 / ASME SB210 / Aluminum and Aluminum-Alloy Drawn Seamless Tubes ASTM B234 / ASME SB234 / Aluminum and Aluminum Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

Page 50: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 50

ASTM B241 / ASME SB241 / Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube ASTM B315 / ASME SB315 / Seamless Copper Alloy Pipe and Tube ASTM B337 / ASME SB337 / Seamless and Welded Titanium and Titanium Alloy Pipe ASTM B338 / ASME SB338 / Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchanges ASTM B359 / ASME SB359 / Tubes for Condensers and Heat Exchangers Heat Exchanger Tubes with Integral Fins ASTM B395 / ASME SB395 / Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes ASTM B407 / ASME SB407 / Nickel-Iron-Chromium Alloy Seamless Pipe and Tube ASTM B423 / ASME SB423 / Nickel Iron Chromium Molybdenum Copper Alloy (UNS N08825 AND N08221) Seamless Pipe and Tube ASTM B443 / ASME SB443 / Nickel Chromium Molybdenum Columbium Alloy (UNS N06625)Plate, Sheet, and Strip ASTM B444 / ASME SB444 / Nickel-Chromium-Molybdenium-Columbium Alloy(UNS N06628)Pipe And Tube ASTM B464 / ASME SB464 / Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Pipe Incoloy 020 = UNS 08020 ASTM B466 / ASME SB466 / Seamless Copper Nickel Pipe and Tube ASTM B467 / ASME SB467 / Welded Copper Nickel Pipe ASTM B468 / ASME SB468 / Welded UNS N08020 N08024 and N08026 Alloy Tubes ASTM B514 / ASME SB514 / Welded Nickel Iron Chromium Alloy Pipe. ASTM B515 / ASME SB515 / Welded UNS N08800 and UNS N08810 Alloy Tubes ASTM B516 / ASME SB516 / Welded Nickel Chromiumiron Alloy (UNS N06600), UNS N06025, and UNS N06045 Tubes ASTM B517 / ASME SB517 / Specification for Welded Nickel Chromium Iron Alloy(UNS N06600) UNS N06025 and UNS N06045 Pipe ASTM B523 / ASME SB523 / Seamless and Welded Zirconium and Zirconium Alloy Tubes ASTM B535 /ASME SB535 / Nickel Iron Chromium Silicon Alloys (UNS N08330 AND N08332) Seamless Pipe And Tube ASTM B619 / ASME SB619 / Wedded Nickel and Nickel Cobalt Alloy Pipe Hastelloy B-2 = UNS N10665 / Hastelloy C-276 = UNS N10276 ASTM B622 / ASME SB622 / Seamless Nickel and Nickel Cobalt Alloy Pipe and Tube ASTM B626 / ASME SB626 / Welded Nickel and Nickel Clbalt Alloy Tube ASTM B658 / ASME SB658 / Seamless and Welded Zirconium and Zirconum Alloy Pipe ASTM B668 / ASME SB668 / UNS N08028 Seamless Tubes ASTM B673 / ASME SB673 / UNS N08904, UNS N08925, and N8926 Welded Pipe ASTM B674 / ASME SB674 / UNS N08904, UNS N08925, and UNS N08926 Welded Tube ASTM B675 / ASME SB675 / UNS N08366 and UNS N08367 Welded Pipe ASTM B676 / ASME SB676 / UNS N08366 and UNS N08367 Welded Tube ASTM B677 / ASME SB677 / UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube ASTM B690 / ASME SB690 / Iron Nickel Chromium Molybdenum Alloys(UNS N08366 AND UNS N09367) Seamless Pipe and Tube ASTM B704 / ASME SB704 / Welded UNS N06625 and UNS N08825 Alloy Tubes ASTM B705 / ASME SB705 / Nickel Alloy (UNS N06625 and UNS N08825) Welded Pipe ASTM B710 / ASME SB710 / Nickel Iron Chromium Silicon Alloy Welded Pipe ASTM B729 / ASME SB729 / Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Pipe and ASTM B751 / ASME SB751 / General Requirements for Nickel and Nickel Alloy Seameless and Welded Tube ASTM B775 / ASME SB775 / General Requriements for Nicel and Nickel Alloy Seamless and Welded Pipe ASTM B804 / ASME SB804 / UNS N08367 and UNS N08926 Welded Pipe ASTM B829 / ASME SB829 / General Requirements For Nickel and Nicel Alloys Seamless Pipe and Tube

Page 51: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 51

Steel Pipe Specification

Pipe World Standards 4. JIS STD

JIS(Japan Industrial Standards) JIS G3442 Galvanized Steel Pipes for Water Service (SGPW) JIS G3447 Stainless Steel sanitary Pipes (SUS 304TBS/304LTBS/ 316TBS/316LTBS) JIS G3448 Light Gauge Stainless Steel Pipes for Ordinary Piping (SUS304TPD/316TPD) JIS G3452 Carbon Steel Pipes for Ordinary Piping (SGP) JIS G3454 Carbon Steel Pipes for Pressure Service (STPG 370/STPG 410) JIS G3455 Carbon Steel Pipes for High Pressure Service (STS 370/STS 410/STS 480) JIS G3456 Carbon Steel Pipes for High Temperature Service (STPT370/STPT410/STPT480) JIS G3457 Arc Welded Carbon Steel Pipes (STPY400) JIS G3458 Alloy Steel Pipes (STPA 12/ 20/ 22/ 23/ 24/ 25/ 26) JIS G3459 Stainless Steel Pipes (SUS 304TP/304HTP/304LTP/309TP/309STP) JIS G3460 Steel Pipes for Low Temperature Service (STPL 380/STPL 450/STPL 690) JIS G3468 Arc Welded Large Diameter Stainless Steel Pipes (SUS304TPY /304LTPY) JIS G3469 Polyethylene coated Steel Pipes (P1H /P2S/P1F) JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchagner (STB 340/STB 410/STB 510) JIS G3462 Alloy Steel for Boiler and Heat Exchanger Tubes (STBA12/ 13/ 20/ 22) JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes (SUS304TB/304HTB/316TB) JIS G3464 Steel Heat Exchanger Tubes for Low Temperature Service (STBL380/ 450/690) JIS G3467 Steel Tubes for Fired Heater (STF 410/STFA 12/ 22/ 23/ 24/ 25/ 26) JIS G3131 Hot-Roll mild steel plates, sheet and strip (HR Pipe SPHC/SPHD/SPHE) JIS G3141 Cold-reduced carbon steel sheets and strip(CR Pipe SPCC/SPCD/SPEC) JIS G3441 Alloy steel tubes for machine purposes (SCr420TK/SCM415TK/418TK/420TK) JIS G3444 Carbon steel tubes for general structural purposes (STK290/STK400/500/490) JIS G3445 Carbon steel tubes for machine structural purposes (STKM11A/12A/13A/14A) JIS G3446 Stainless steel pipes for machine and structural purposes (SUS304TKA)ROUND JIS G3446 Stainless steel pipes for machine and structural purposes (SUS304TKA)Square.Re. JIS G3466 Carbon steel Square for general structural purposes (STKR 400/STKR 490) JIS G3471 Corrugated steel pipes and sections (SCP1R/SCP 1 RS/SCP 2 R/SCP 3 RS/SCP2E) JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes JIS G3473 Carbon Steel Tubes Cylinder Barrels (STC370/STC440/STC510A/STC510B/STC540) JIS G3474 High Tensile Strength Steel Tubes for Tower Structural Purposes (STKT540/590) JIS G4051 Carbon steel for Machine Structural Use (S45C Pipe) JIS A5525 Steel pipes piles (SPS290/SPS400/SPS500/SPS490/SPS540) JIS A5530 Steel pipe sheet piles (SKY 400/SKY 490) JIS G3429 Seamless Steel Tubes for High Pressure Gas Cylinder (STH 11/STH 12/STH 21..) JIS G3465 Seamless Steel Tubes for Drilling (STM-C 540/STM-C 640 /STM-R 590/STM-R 690) JIS G4903 Seamless nickel-chromium-iron alloy pipes (NCF600TP/NCF625TP/NCF690TP) JIS G4904 Seamless nickel-chromium-iron alloy heat exchanger tubes (NCF600TB/NCF625TB) JIS C8305 Rigid steel conduits (G 16/G 22/G 28/G 36/G 42/G 54/G 70/G 82) JIS C8380 Plastic coated steel pipes for cable ways (G16LL/G16LT/G 22LL/G 22LT/G 28LL8LT) JIS G4805 Seamless Pipe High Carbon Chromium Bearing Steel Pipe (SUJ-2)

Page 52: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 52

Steel Pipe Specification

Pipe World Standards 5. DIN STD

DIN(Deutsches Insititut for Normung) DIN1615 / Welded Circular Unalloyed Steel Tubes Not Subject To Special Requirements DIN1626 / Welded Circular Tubes of Non Alloy Steels with Special Quality Requirements (USt37.0/St37.0/St44.0/St52.0) DIN1628 / Welded Circular Tubes of Non Alloy Steels with Very High Quality Requirements (St37.4/St44.4/St52.4) DIN1629 / Seamless Circular Tubes of Non Alloy Steels with Special Quality Requirements (St 37.0/St 44.0/St 52.0/1.0254/1.0256/1.0421) DIN1630 / Seamless Circular Tubes of Non Alloy Steels with Very High Quality Requirements (St 37.4/St 44.4/St 52.4/1.0255/1.0257/1.0581) DIN2391-1 / Seamless Precision Steel Tubes (St30Si/St30A1/St35/St45/St52) DIN2391-2 / Seamless Precision Steel Tubes (St30Si/St30A1/St35/St45/St52) DIN2393-1 / Welded Precision Steell Tubes (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3) DIN2393-2 / Welded Precision Steell Tubes (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3) DIN2394-1 / Welded And Sized Precision Steel Tubes (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3) DIN2394-2 / Welded And Sized Precision Steel Tubes (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3) DIN2395-1 / Rectangular and Square Electric Welded Precision Steel Tubes DIN2395-2 / Rectangular and Square Electric Welded Precision Steel Tubes (St 34.2/St 37.2/St 52.3) DIN2395-3 / Rectangular and Square Electric Welded Precision Steel Tubes DIN2402 Pipelines Nominal Widths efinition Grading Pipework; grading of nominal sizes DIN2403 Marking of pipes according to fluid transported DIN2413 Part1 Design of steel pressure pipes DIN2413 Part2 Design of steel bends used in pressure pipelines DIN2440 / Steel Tubes Medium Weight Suitable for Screwing (St33.2) DIN2441 / Steel Tubes Heaby Weight for Suitable for Screwing (St33.2) DIN2444 / Zinc Coatings on Steel Tubes DIN2445-1 / Seamless Steel Tubes for Dynamic Loads Hot Finished Tubes Nominal Pressures 100 to 400 DIN2445-2 / Seamless Steel Tubes for Dynamic Loads Basis for Caluculation of Straight Tubes (St 35,4/St 52,4) DIN2448 / Seamless Steel Pipes and Tubes DIN2449 / Seamless Steel Pipes and Tubes DIN2450 / Seamless Steel Tubes in St 35 Dimensions and Range of ApplicationTION DIN2458 / Welded Steel Pipes and Tubes DIN2460 / Steel Pipes for Water Pipelines DIN2462 / Seamless Tubes Of Stainless Steel (1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571) DIN2463 / Weldel Tubes of Austenitic Stainless Steel (X5CrNi189/X2CrNi189/X5CrNiMo1810/X2CrNiMo1810/X2CrNiMo1812/X5CrNiMo1812/X10CrNiTi189) DIN2916 Bending Radii for seamless and Welded Steel Tubes DIN2917 Seamless steel tubes for superheated pipelines and headers DIN17100 / Steels for General Structural Purposes (St33/St37.2/USt37.2/RSt37.2/St37.3/St44-2/St44-3/St50-2/St60-2/St52-33/St50-2/St60-2/St70-2) DIN17102 / Weldable Normalized Fine Grain Structural Steels (StE255/WStE255/TStE255/EStE255/StE285/WStE285/TStE285/EStE285/) DIN17119 / Welded Cold Formed Square And Rectangular Steel Tubes for Structural Steel work (USt 37-2/RSt 37-2/St 37-3/St 44-2/St 44-3/St 52-3/WTSt 37-2/WTSt 37-3/WTSt 52-3) DIN17120 / Welded Circular Steel Tubes for Structural Steelwork (USt37-2/RSt37-2/St37-2/St44-2/St44-3/St52-3) DIN17121 / Seamless Circlar Steel Tubes for Structural Steelwork (RSt37-2/St37-3/St44-2/St44-3/St52-3) DIN17123 / Welded Circular Fine Grain Steel Tubes for Structural Steelwork (StE225/TStE255/EStE255/StE285/StE355/TStE355/EStE355/StE420/TStE420/EStE420) DIN17124 / Carbon and Ferritic Alloy Steel Forged and Bored Pipe for Hig Temperatur Service (StE255/TStE255/EStE255/StE285/TStE285/EStE285/StE355/TSTE355/EStE355/StE420/TStE420/EStE420) DIN17172 / Steel Pipes for Pipe Lines for the Transport of Combustible Fluids and Gases

Page 53: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 53

(StE210.7/StE240.7/StE290.7/StE320.7/StE360.7/StE385.7/StE415.7/StE290.7TM/StE207.7TM/StE360.7TM) DIN17173 / Seamless Circular Tubes Made From Steels with Low Temperature Service (TSt35N/TSt35V/26CrMo4/11MnNi53/13MnNi63/10Ni14/12Ni19/X8Ni19) DIN17174 / Seamless Steel Tubes for Elevated Temperatures (TTSt 35 N/TTSt 35 V/11 MnNi 5 3/13 MnNi 6 3/10 Nl 14/12 Nl 19/X 8 Ni 9/1.0356/1.6212/1.6217/1.5637/1.5680) DIN17175 / Electricall Resitance Or Induction Weled Steel Tubes for Elevated Temperature (St35.8/St45.8/17Mn4/19Mn5/15Mo3/13CrMo910/10CrMo910/14MoV63/X20CrMoV121) DIN17176 Seamless circular steel tubes for hydrogen service at elevated temperatures and pressures Technical delivery condition DIN17177 / Electrically Resitance or Induction Welded Steel Tubes for Elevated Temperature (St37.8/St42.8/15Mo3) DIN 17178 Welded circular fine grain steel tubes subject to special requirements Technical delivery conditions DIN 17179 Seamless circular fine grain steel tubes subject to special requirements Technical delivery conditions DIN17455 / General Purpose Welded Circular Stainless Steel Tubes(Round Pipe) ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571) DIN17455 / General Purpose Welded Circular Stainless Steel Tubes(Square.Rectangular Pipe) ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571) DIN17456 / General Purose Seamless Circular Stainless Steel Tubes ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571) DIN17457 / Welded Circular Austenitic Stainless Steel Tubes Subject to Special Requirements ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571) DIN17458 / Seamless Circular Austenitic Stainless Steel Tubes Subject to Special Requirements (1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571) DIN17671 / Wrought Copper and Copper Alloy Tubes Properties DIN 59410 Hollow Sections for Structural Steel Engineering ot Formed Square and Rectangular Steel Tubes Dimensions, Weights, Perissible Deviations, Static Values DIN 59411 Hollow Sections for Structural Steel Engineering Cold Formed Welded Square and Rectangular Steel Tubes Dimension, Weights, Permissible Deviations, Static Values

Page 54: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 54

Steel Pipe Specification

Pipe World Standards 6. ISO STD

ISO(International organization for Standaridization)

ISO 65 / Carbon Steel Tubes Suitable for Screwing in Accordance with ISO 7/1 (TS/TW) ISO 559 / Welded or Seamless Steel Tubes for Water Sewage and Gas (TSO/TWO/TS1/TW1/TS4/TW4/TS9/TW9)

ISO 2604-2 / Steel Products for Pressure Purposes PART2 Wrought Seamless Tubes (TS1/TS2/TS4/TS5/TS6/TS9/TS9H/TS10/TS13/TS14/TS15)

ISO 2604-3 / Steel Products for Pressure Purpose Parts Electric Resistance and Induction Welded Tubes (TW1/TW2/TW4/TW5/TW6/TW9/TW9H/TW10/TW13/TW14)

ISO 2604-5 / Steel Products for Pressure Purposes PART5 Longitudinally Welded Austenitic stainless Steel Tubes (TW46/TW47/TW50/TW53/TW57/TW58/TW60/TW61/TW69)

ISO 2937 / Plain End Seamless Steel Tubes for Mechanical Application (TS1/TS4/TS9/TS18/C35) ISO 2938 / Hollow Steel Bars for Machining (Gr1/Gr2)

ISO 3183 / Oil and Natural Fas Industries Steel Line Pipe (E17/E21/E24-1/E24-2) ISO 3304 / Plain end Seamless Precision Steel Tubes (R28/R33/R37/R42/R50) ISO 3305 / Plain end Welded Precision Steel Tuves (R28/R33/R37/R44/R50)

ISO 3306 / Plain end as Welded and Sized Precision steel Tubes (R28/R33/R37/R44/R50)

Page 55: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 55

Steel Pipe Specification

Pipe World Standards 7. KS STD

KS(Korean Standards) KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP ZINC WATER) KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP BLACK) KS D 3537 Galvanized Steel Pipes for Water Service (SPPW) KS D 3562 Carbon Steel Pipes for Pressure Service (SPPS 370/SPPS 410) KS D 3564 Carbon Steel Pipes for High Pressure Service (SPPH 370/SPPH 410/SPPH 480) KS D 3569 Steel Pipes for Low Temperature Service (SPLT 380/SPLT 450/SPLT 690) KS D 3570 Carbon Steel Pipes for High Temperature Service (SPHT370/SPHT410/SPHT480) KS D 3573 Alloy Steel Pipes (SPA 12/SPA 20/SPA 22/SPA 23/SPA 24/SPA 25/SPA 26) KS D 3576 Stainless Steel Pipes (STS304TP/STS304HTP/STS304LTP/STS309TP/STS309STP) KS D 3583 Arc Welded Carbon Steel Pipes (SPW 400) KS D 3585 Stainless Steel sanitary Pipes (STS 304TBS/STS 304LTBS/STS 316TBS) KS D 3588 Arc Welded Large Diameter Stainless Steel Pipes (STS 304 TPY/STS 304 LTPY) KS D 3589 Polyethylene coated Steel Pipes (P1H/P2S/P1F) KS D 3595 Light Gauge Stainless Steel Pipes for Ordinary Piping (STS 304 TPD/STS 316 TPD) KS D 3563 Carbon Steel Tubes for Boiler and Heat Exchaner (STBH 340/STBH 410/ 510) KS D 3571 Steel Heat Exchanger Tubes for Low Temperature Service (STLT380/STLT450) KS D 3572 Alloy Steel for Boiler and Heat Exchanger Tubes (STHA 12/STHA 13/STHA 20) KS D 3577 Stainless Steel for Boiler and Heat Exchanger Tubes (STS 304TB/STS 304HTB) KS D 3587 Steel Tubes for Fired Heater (STF410/STFA12/STFA22/STFA23/STFA24/STFA25) KS D 3517 Carbon steel tubes for machine structural purposes (STKM 11A/STKM 12A) KS D 3536 Stainless steel pipes for machine and structural purposes (STS430TKA/430TKC KS D 3536 Stainless steel pipes for machine and structural purposes (STS304TKA/430TKC) KS D 3566 Carbon steel tubes for general structural purposes (SPS 290/SPS 400/SPS 500) KS D 3568 Carbon steel Square for general structural purposes (SPSR 400/SPSR 490) KS D 3574 Alloy steel tubes for machine purposes (SCr 420 TK/SCM 415 TK/SCM 418 TK) KS D 3590 Corrugated steel pipes and sections (SCP 1 R/SCP 1 RS/SCP 2 R/SCP 3 RS) KS D 3598 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes (STAM 290GA/STAM 290GB/STAM 340G/STAM 390G/440G/470G/500G) KS D 3618 Carbon Steel Tubes Cylinder Barrels (STC 370/STC 440/STC 510 A/STC 510 B) KS D 3780 High Tensile Strength Steel Tubes for Tower Structural Purposes (STKT 540) KS F 4602 Steel pipes piles (SPS30/SPS41/SPS51/SPS50/SPS55) KS F 4605 Steel pipe sheet piles (SKY 400/SKY 490 ) KS D 3575 Seamless Steel Tubes for High Pressure Gas Cylinder (STHG11/STHG12/STHG21) KS D 3757 Seamless nickel-chromium-iron alloy heat exchanger tubes (NCF 600 TB) KS D 3758 Seamless nickel-chromium-iron alloy pipes (NCF600TP/NCF625TP/NCF690TP) KS C 8401 Rigid steel conduits (G16/G22/G28/G36/G42/G54/G70/G82/G92/G104) KS E 3114 Seamless Steel Tubes for Drilling (STM-C 540/STM-C 640/STM-R 590/R 690)

Page 56: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 56

Steel Pipe Specification

Pipe World Standards 8. NF STD

NF(Norme Francise) NF A49-111 / Steel Tubes Plain end Seamless Tubes of Commercial Quality for General Purposes at Medium Pressure (TU37a) NF A49-112 / Steel Tubes Plain end Seamless Hot Rolled Tubes with Special Delivery Conditions (TUE220A/TUE235A) NF A49-115 / Steel Tubes Seamless Plain end Tubes for Pipe Lines and General Use Ferritic And Austenitic Stainless Steels (TUZ2CN18-10/TUZ6CN18-09//TUZ6CND17-11) NF A49-141 / Steel Tubes Seamless Plain end Tubes for Pipe Lines and General Use Ferritic and Austenitic Stainless Steels (TS37a) NF A49-142 / Steel Tubes Longitudinally Pressure Welded Plain Ended And Hot Finished Tubes (TES185A/TSE235A/TSE250A/TSE275A) NF A49-145 / Steel Tubes Hot Finished welded Tubes Suitable for Threading (TS334-1) NF A49-146 / Steel Tubes Unthreaded Plain Ended Welded Tubes for Liquids (TS34-a) NF A49-148 / Steel Tubes Plain end Longitudinally Welded Tubes for Pipe Lines adn General use Ferritic Stainless Steels (TSZ5CT14/TSZ6CT17/TSZ6CT17/TSZ18C17) NF A49-150 / Steel Tubes Welded Tubes Intended to be Coated of Protected for use in Water Piping Systems (TSE235) NF A49-175 / Steel Tubes Plain end Longitudinally Welded Tubes for Pipe Lines and General use Austenitic Stainless Steel (TSZ2CN18-10/TSZ6CN18-09/TSZ3CNT18-10) NF A49-207 / Steel Tubes Seamless or Longitudinally Welded Stainless Steel Tubes For Exchangers in Aircraft Construction (TSZ2CN18-10/TUZ2CN8-10/TSZ6CNNb18-12) NF A49-210 / Steel Tubes Seamless Cold Drawn Tubes for Fluid Piping (TU37B/TU42B) NF A49-211 / Steel Tubes Seamless Plain end Unalloyed Steel Tubes for Fluid Piping at Elevated Temperatures (TUE220/TUE250/TUE275) NF A49-212 / Steel Tubes Seamless Unalloyed Steel Tubes for Use At Medium Temperatures (TU37C/TU42C) NF A49-213 / Steel Tubes Seamless Unalloyed and Mo Crmo Alloy Steel Tubes for Use at High Temperatures (TU37C/TU42C/TU42CR/TU48C/TU48CR/RU52C/TU15D3/TU15CD2-05) NF A49-214 / Steel Tubes Seamless Austenitic Steel Tubes for use at High Temperatures (Z6CN19-10/Z3CND17-12B/Z6CNT18-12B/Z6CNNb18-12B/) NF A49-215 / Steel Tubes Seamless Tubes For Ferritic NonAlloy And Alloy Heat Exchangers (TU37C/TU42C/TU48C/TU15D3/TU15CD2-05/TU10CD5-05/TU10CD9-10) NF A49-217 / Steel Tubes Seamless Tubes for Heat Exchangers (TUZ12C13/TUZ10C17/TUZ2CN1810/TUZ2CN1810AZ/TUZ3CN1809/TUZ1CNS1815) NF A49-218 / Steel Pipes Seamless Pipes for Rurnaces Austenitic Stainless Steels (TUZ6CN18-09/TUZ2CN18-10/TUZ6CNT18-10/TUZ6CNNb18-10/TUZ6CND17-11/TUZ2CND17-12) NF A49-230 / Steel Tubes Plain end Seamless Tubes for Pressure Vessels and Piping Systems Used at Low Temperatures (TU42BT/TU17N2/TU10N9/TU10N14/TUZ6N9) NF A49-240 / Steel Tubes Longitudinally Butt welding Plain End for Pressure Vessels and Pipe Systems Used at Low Temperatures (TS42BT/TS17N2/TS10N9) NF A49-241 / Steel Tubes Longitudinally Pressure Welded Tubes D 168.3mmMax in not Alloyed and Low Alloyed at Medium Elevated Temperatures(TS37C/TS42C/TSE24W3) NF A49-242 / Steel Tubes Longitudinally Pressure Welded Tubes D 168.3mmMax in not Alloyed and Low Alloyed at Medium Elevated Temperatures (TS37C/TS42C/TSE24W3/TSE36WB3) NF A49-243 / Steel Tubes Longitudinally Pressure Welded Tubes D 168.3mm in not Alloyed and Ferritic Alloyed Steels Used at Elevated Temperatures (TS37C/TS42C/TS48C/TS52C/TS15D3/TS15CD2-05/TS15CD4-05) NF A49-245 / Steel Tubes Longitudinally Welded Tubes For Ferric Non Alloy and Alloy Steel Heat Exchangers (TS34C/TS37C/TS42C/TS48C/TS24W3) NF A49-249 / Steel Tubes Longitudinally Welded Plain End Tubes for Food Industry Austenitic Staniness Steels (TSZ6CN18-09/TSZ2CN18-10/TSZ2CND17-12/TSZ2CND17-11) NF A49-250 / Steel Tubes Welded Plain End Tubes of Commercial Quality with or Without Special Delivery ConditionsD168.3mmMax (TSE24a/TSE26b) NF A49-253 / Steel Tubes Longitudinally Fusion Welded Non Alloy and Ferritic Alloy Steel Tubes for use at Elevated Temperatures (TS37CP/TS42CP/TS48CP/TS52CP) NF A49-310 / Steel Tubes Seamless Precision Tubes for Mechanical Application (TU37-b/TU52-b/TU56-b) NF A49-311 / Steel Tubes Seamless for Mechanical Application (TU37-b/TU52-b/TU56-b/TUXC35)

Page 57: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 57

NF A49-312 / Steel Tubes Seamless Tubes for Mechanical Application Supplementary Series (TU52-b/TUXC35) NF A49-317 / Steel Tubes Seamless Plain end Tubes for Engineering Use Austenitic Stainless Steel (TUZ2CN18-10/TUZ2CN17-12) NF A49-321 / Steel Tubes Jacks for Hydraulic Transmissions Cold Roled (TU37b/TU52b/TU52BT/TU18/MDV5/TU17/MV5) NF A49-322 / Steel Tubes Jacks for Hydraulic Transmissions Cold Rolled or Cold Drawn Seamless Tubes Type Suitable for Grinding in (TU37b/TU52b/TU17/MV5) NF A49-323 / Steel Tubes Jacks for Hydraulic Transmissions Clod Rolled or Cold Drawn Seamless Tubes Type Ready for Use (TU37b/TU52b/TU52BT/TU17/MV5) NF A49-326 / Steel Tubes Jacks for Pneumatic Transmissions Clod Drawn Seamless Tubes Type Suitable for Grinding in (TU37b/TU52b/TU52BT) NF A49-327 / Steel Tubes Jacks for Pneumatic Transmissions Cold Drawn Seamless Tubes Type Ready for Use (TU37b/TU52b) NF A49-330 / Steel Tubes Seamless Cold Drawn Tubes for Hydraulic and Pneumatic Power Systems (TU37b/TU52b/TU42BT/TU17N2/TU10N14) NF A49-341 / Steel Tubes Precision Welded Tubes for Mechanical Application (TS30o/TS30a/TS34a/TS7a/TS42a/TS47a) NF A49-343 / Steel Tubes Longitudinally Welded Tube D 168.3mmMax for Engineering Use (TS37b/TS815M5/TS18/MDV5) NF A49-400 / Longitudinally Electric Resistance Welded Unalloyed Steel Tubes D 17.2Min 406.4mmMax for the Transport of Pressurized Fluids (TSE220/TSE250/TSE290/TSE320/TSE360Nb/TSE360B/TSE415Nb/TSE415V) NF A49-401 / Steel Tubes Longitudinally Fusion Welded Non Alloy and Micro Alloy Sttel Tubes for Fluid Transporting Pipes and Pressure Vessels (TSE220/TSE250/TSE290/TSE320/TSE360/TSE415/TSE450/TSE480) NF A49-402 / Steel Tubes Spiral Fusion Welded Non Alloy and Micro Alloy Steel Tubes for Fluid Transporting Pipes and Pressure Vessels (TSE220/TSE250/TSE290/TSE320/TSE360/TSE415/TSE450/TSE480) NF A49-501 / Steel Tubes Seamless or Welded Hot Finished Structural Hollow Sections (TUTSE235-2/TUTSE235-3/TUTSE235-4/TUTSE275-2/TUTSE275-3/TUTSE175-4/TSE295-2) NF A49-541 / Steel Tubes Cold Finished Welded Structural Hollow Sections (TSE235-2/TSE235-3/TSE235-4/TSE275-2/TSE275-3/TSE275-4) NF A49-643 / Steel Tubes Round Square and Rectangular Steel Tubes for Ordinary Longitudinally Pressure Welded and Cold Formed From Flat Froducts (TS30-1/TS30-2/TS34-2/TS37-2/TS42-2/TS47-2/TS335D/TS390D/TS445D) (Round) NF A49-643 / Steel Tubes Round Square and Rectangular Steel Tubes for Ordinary Longitudinally Pressure Welded and Cold Formed From Flat Products (TS30-1/TS30-2/TS34-2/TS37-2/TS42-2/TS47-2/TS335D/TS390D/TS445D) (Square.Rectangular) NF A49-645 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17) (Round) NF A49-645 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17) (Square.Rectangular) NF A49-647 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17-11) (Round) NF A49-647 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17-11) (Square.Rectangular)

Page 58: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 58

Steel Pipe Specification

Pipe World Standards 9. GOST RUSSIA STANDARD

GOST RUSSIA STANDARD Smooth Seamless Steel Tubes GOST 8731-74 Seamless Hot-Deformed Steel Tubes. Technical requirements. GOST 8732-78 Seamless hot-deformed steel tubes. Range. GOST 8733-74 Seamless cold and warm deformed steel tubes.Technical requirements. GOST 8734-75 Seamless cold and warm deformed steel tubes. Range. GOST 9567-75 Precision tubes steel. Range. GOST 9940-72 Seamless hot deformed tubes made of corrosion resistant steel. GOST 9941-72 Seamless cold and warm deformed tubes made of corrosion Resistant steel. GOST 10498-63 Especially thin walled seamless tubes made of corrosion resistant (stainless) steel. GOST 1060-76 Steel seamless cold-deformed tubes for shipbuilding.Technical requirements. GOST 5654-76 Steel seamless hot-deformed tubes for shipbuilding.Technical requirements. GOST 550-75 Steel seamless steel tubes for petroleum processing and petrochemical industry. GOST 14162-69 Small-sizes steel tubes ( capillary ). GOST 10192-62 Bimetallic seamless tubes. Range. GOST 21945-76 Seamless hot-deformed steel tubes made of alloys on the basis of titanium. Technical requirements. GOST 21729-76 Seamless cold-deformed and hot-deformed tubes made of structural carbon and alloyed steel. GOST 22786-77 Bimetallic seamless tubes for shipbuilding. Technical requirements GOST 631-75 Internal-external upset drill tubes with couplings. GOST 8467-57 Drill tubes for geology-exploring with nipple connections. GOST 632-64 Casing tubes with couplings. GOST 6238-77 Casing and coring tubes for geology-exploring drilling and nipples to them. Technical requirements. GOST 633-63 Tubing pipes with couplings. GOST 10704-76 Electrically welded steel tubes, line-weld. Range. GOST 10706-76 Electrically welded steel tubes, line-weld. Technical requirements. GOST 10707-73 Electrically welded cold-drawn and cold-rolled steel tubes.Technical requirements. GOST 11068-64 Electrically welded stainless steel tubes GOST 3262-75 Steel tubes for water and gas supply with couplings. GOST 8696-74 Electrically welded steel tubes with spiral seams for general purposes GOST 5005-65 Electrically welded steel tubes for car cardan shafts. GOST 11249-73 Steel rolled up soldered double-layer tubes. GOST 12132-66 Electrically welded and seamless steel tubes for automotive and bicycle industries. GOST 20295-74 Welded steel tubes for main oil and gas pipelines. GOST 13663-68 Shaped steel tubes. Technical requirements. GOST 3664-68 Steel tubes star-shaped. Range. GOST 13665-68 Corrugated steel tubes. Range. GOST 13666-68 Many-ribbed steel tubes. Range. GOST 13667-68 Ribbed steel tubes. Range. GOST 13668-68 Steel tubes with inside splines. Range. GOST 8639-82 Square steel tubes. Range. GOST 8642-68 Oval steel tubes. Range. GOST 8644-68 Flat-sided oval steel tubes. Range. GOST 8645-68 Rectangular steel tubes. Range. GOST 11681-65 Bended stainless steel tubes. Range. GOST 11682-65 Bended stainless steel tubes. Technical requirements. TU 14-3-190-82 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (10) TU 14-3-460-74 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (20)(12H1MF/15HM ) GOST 10192-62 Bimetallic seamless tubes. Range. GOST 21945-76 Seamless hot-deformed steel tubes made of alloys on the basis of titanium. Technical requirements. GOST 21729-76 Seamless cold-deformed and hot-deformed tubes made of structural carbon and alloyed steel. GOST 22786-77 Bimetallic seamless tubes for shipbuilding. Technical requirements GOST 20295-74 Welded steel tubes for main oil and gas pipelines. GOST 13663-68 Shaped steel tubes. Technical requirements. GOST 3664-68 Steel tubes star-shaped. Range. GOST 13665-68 Corrugated steel tubes. Range. GOST 13666-68 Many-ribbed steel tubes. Range.

Page 59: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 59

GOST 13667-68 Ribbed steel tubes. Range. GOST 13668-68 Steel tubes with inside splines. Range. GOST 8639-82 Square steel tubes. Range. GOST 8642-68 Oval steel tubes. Range. GOST 8644-68 Flat-sided oval steel tubes. Range. GOST 8645-68 Rectangular steel tubes. Range. GOST 11681-65 Bended stainless steel tubes. Range. GOST 11682-65 Bended stainless steel tubes. Technical requirements. TU 14-3-190-82 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (10) TU 14-3-460-74 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (20)(12H1MF/15HM )

Page 60: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 60

Steel Pipe Specification

Pipe World Standards 10. AWWA STANDARD

AWWA (American Water Works Association) AWWA C200-97: Steel Water Pipe-6 In. (150 mm) and Larger AWWA C203-02: Coal-Tar Protective Coatings & Linings for Steel Water Pipelines, Enamel & Tpae, Hot-pap. (Incl. add. C203a-99) AWWA C205-00: Cement-Mortar Protective Lining and Coating for Steel Water Pipe- 4 In. (100 mm) and Larger-Shop papli AWWA C206-97: Field Welding of Steel Water Pipe AWWA C207-01: Steel Pipe Flanges for Waterworks Service- Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm) AWWA C208-01: Dimensions for Fabricated Steel Water Pipe Fittings AWWA C209-00: Cold-paplied Tpae Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipe AWWA C210-97: Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines AWWA C213-01: Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines AWWA C214-00: Tpae Coating Systems for the Exterior of Steel Water Pipelines AWWA C215-99: Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines AWWA C216-00: Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fitting AWWA C217-99: Cold-paplied Tpae Coatings for Ext. Spec. Sect., Conn., and Fittings for Buried/Submerged Steel Water Pipelines AWWA C218-02: Coating the Exterior of Aboveground Steel Water Pipelines and Fittings AWWA C219-01: Bolted, Sleeve-Type Couplings for Plain-End Pipe AWWA C220-98: Stainless-Steel Pipe, 4 In. (100 mm) and Larger (Includes addendum C220a-99) AWWA C221-01: Fabricated Steel Mechanical Slip-Type Expansion Joints AWWA C222-99: Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings AWWA C223-02: Fabricated Steel and Stainless Steel Tpaping Sleeves AWWA C224-01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings AWWA C225-03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines

Page 61: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 61

Steel Pipe Specification

Pipe World Standards 11.1 SAE STANDARD

SAE(Society of Automative Engineers) SAE J242a Metric Thread Fuel Injection Tubing Connections SAE J246 Spherical and Flanged Sleeve (Compression) Tube Fittings SAE J349 Detection of Surface Imperfections in Ferrous Rods, Bars, tubes, and wires SAE J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading SAE J371 Drain, Fill, and Level Plugs for Off-Road, Self-Propelled work machines SAE J398 Fuel Tank Filler Conditions~Passenger Car, Multi-Purpose passenger vehicles,and Light Duty Trucks SAE J401 Selection and Use of Steels SAE J402 SAE Numbering System for Wrought or Rolled Steel SAE J403 Chemical Compositions of SAE Carbon Steels SAE J404 Chemical Compositions of SAE Alloy Steels SAE J405 Chemical Compositions of SAE Wrought Stainless Steels SAE J406 Methods of Determining Hardenability of Steels SAE J409 Product Analysis~Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel SAE J411 Carbon and Alloy Steels SAE J412 General Characteristics and Heat Treatments of Steels SAE J413 Mechanical Properties of Heat Treated Wrought Steels SAE J422 Microscopic Determination of Inclusions in Steels SAE J424 Method for Determining Breakage Allowances for Sheet Steel SAE J463 Wrought Copper and Copper Alloys SAE J476a Dryseal Pipe Threads SAE J512 Automotive Tube Fittings SAE J513 Refrigeration Tube Fittings~General Specifications SAE J514 Hydraulic Tube Fittings : Title: Hydraulic Tube Fittings SAE J515 Specification For Hydraulic O-Ring Materials, Properties, and Sizes For Metric and Inch Stud Ends, Face Seal Fitting and Four-Screw Flange Tube Connections SAE J518 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt split flange Type : Title: Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt split flange Type SAE J521 Fuel Injection Tubing Connections SAE J524 Seamless Low-Carbon Steel Tubing Annealed for Bending and flaring SAE J525 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for bending and Flaring SAE J526 Welded Low-Carbon Steel Tubing SAE J527 Brazed Double Wall Low-Carbon Steel Tubing SAE J528 Seamless Copper Tube SAE J529 Fuel Injection Tubing SAE J530 Automotive Pipe Fittings SAE J531 Automotive Pipe, Filler, and Drain Plugs : Title: Automotive Pipe, Filler, and Drain Plugs SAE J533 Flares for Tubing SAE J534 Lubrication Fittings SAE J554 Electric Fuses (Cartridge Type) SAE J562 Nonmetallic Loom SAE J830 Fuel Injection Equipment Nomenclature SAE J844 Nonmetallic Air Brake System Tubing SAE J846 Coding Systems for Identification of Fluid Conductors and Connectors SAE J926 Hydraulic Pipe Fittings SAE J935 High Strength Carbon and Alloy Die Drawn Steels SAE J962 Formed Tube Ends for Hose Connections SAE J1037 Windshield Washer Tubing

Page 62: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 62

Steel Pipe Specification

Pipe World Standards 11.2 SAE STANDARD

SAE J1047 Tubing-Motor Vehicle Brake System Hydraulic SAE J1065 Nominal Reference Working Pressures for Steel Hydraulic TubingView Document SAE J 1086 Numbering Metals and Alloys SAE J1131 Performance Requirements for SAE J844 Nonmetallic Tubing and Fitting Assemblies Used in Automotive Air Brake Systems SAE J1140 Filler Pipes and Openings of Motor Vehicle Fuel Tanks SAE J1149 Metallic Air Brake System Tubing and Pipe SAE J1207 Measurement Procedure for Determination of Silencer Effectiveness in Reducing Engine Intake or Exhaust Sound Level SAE J1231 Formed Tube Ends for Hose Connections and Hose Fittings SAE J1290 Automotive Hydraulic Brake System-Metric Tube Connections SAE J1394 Metric Nonmetallic Air Brake System Tubing SAE J1392 Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet SAE J1418 Fuel Injection Pumps.High Pressure Pipes (Tubing) for Testing SAE J1442 High-Strength, Hot-Rolled Steel Bars SAE J1453 Fitting.O-Ring Face Seal SAE J1611 (R) Operator Controls.Horizontal Earthboring Machines SAE J1615 Thread Sealants SAE J1644 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors SAE J1650 Seamless Copper-Nickel 90-10 Tubing SAE J1659 Vehicle Testing Requirements for Replacement Refrigerants for CFC-12 (R-12) Mobile Air-Conditioning Systems SAE J1677 Tests and Procedures for SAE Low-Carbon Steel and Copper nickel Tubing SAE J 1684 Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials SAE J1737 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation SAE J 1755 Guidelines for Usage of Stainless Steel and Bimetal for exterior automotive Bright Trim SAE J1781 Materials for Fluid Systems of Marine Vehicles SAE J1944 Truck and Bus Multipurpose Vehicle Windshield Washer System SAE J1949 Road Vehicles. High Pressure Fuel Injection Pipe Connections with 60 Degree Female Cone SAE J1958 Diesel Engines.Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing) SAE J1991 Standard of Purity for Use in Mobile Air-Conditioning Systems SAE J2022 Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines SAE J2027 Standard for Protective Covers for Gasoline Fuel Line Tubing SAE J2043 Nonmetallic Fuel System Tubing SAE J2044 Quick Connector Specification for Liquid Fuel and Vapor/Emissions Systems SAE J2045 Performance Requirements for Fuel System Tubing Assemblies SAE J2244/1 Connection for Fluid Power and General Use. Ports and Stud Ends with ISO 261 Threads : Part 1 : Port with O-Ring Seal in Truncated Housing SAE J2244/2 Connection for Fluid Power and General Use. Ports and stud Ends with ISO 261 Threads andand O-Ring Sealing : Part 2 : Heavy-Duty (S Series) Stud Ends. Dimensions, Design, Test Methods, and Requirements SAE J2254 Fluid Power Piping Cleaning Process SAE J2260 Nonmetallic Fuel System Tubing with One or More Layers SAE J2305 Safety for Horizontal Earthboring Machines SAE J2405 Low-Permeation Fuel Fill and Vent Tube SAE J2435 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading SAE J2467 Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring SAE J2494 Push-to-Connect Tube Fittings for Use in the Piping of Vehicular Air Brake SAE J2494-2 Dimensional Specifications for Non-Metallic Body Push-to- Connect Fittings Used on a Vehicular Air Brake SAE J2494-3 Performance Requirements for SAE J 844 Non-metallic Air Brake Tubing and Push to Connect Fitting Assemblies Used in Vehicular Air Brake Systems SAE J2494-4 Cartridge Cavity SAE J2551 Recommended Practices for Fluid Conductor Metallic Tubing Applications SAE J2583 Directional Drilling Planning and Mapping Nomenclature SAE J2599 Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative Emission Requirements SAE J2613 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending SAE J2614 Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring SAE J2658 Metallic Tube Conductor Assemblies for Fluid Power and General Use~Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies SAE J24714 Fluid Systems-Connector Tubes~General Specification and Part Standard

Page 63: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 63

Steel Pipe Specification

Pipe World Standards 12. GB STANDARD

GB STANDARD(China Standard) Seamless Steel Pipe GB T17395 Seamless Steel Pipe GB T8162 Structure Pipe 10 20 35 45 40Mn2 45Mn2 27SiMn 20Cr 40Cr 20CrMo 35CrMo 38CrMoA1 50CrV 30CrMnSi GB T14975 Structure for Stainless seamless Tube mechanical structure,fluid pipeline,passing heat equipment of boiler,heat converter,congealed equipment,catalytic pipeline 0Cr18Ni9 1Cr18Ni9 00Cr19Ni10 0Cr18Ni10Ti 0Cr18Ni11Nb 0Cr17Ni12Mo2 00Cr17Ni14Mo2 0Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 0Cr18Ni12Mo3Ti 1Cr18Ni12Mo3Ti 1Cr18Ni9Ti 0Cr19Ni13Mo3 00Cr19Ni13Mo3 0Cr13 1Cr17 1Cr13 2Cr13 GB T8163 Seamless Pipe For Fluid Pipe 10 20 Q295 Q345 GB T14976 Stainless Seamless Pipe For Fluid Pipe 0Cr18Ni9 00Cr19Ni10 0Cr23Ni13 0Cr25Ni20 0Cr18Ni10Ti 0Cr18Ni11Nb 0Cr17Ni12Mo2 00Cr17Ni14Mo2 0Cr19Ni13Mo3 00Cr19Ni13Mo3 0Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 0Cr18Ni12Mo3Ti 1Cr18Ni12Mo3Ti 0Cr18Ni12Mo2Cu2 00Cr18Ni14Mo2Cu2 0Cr13 0Cr26Ni5Mo2 GB T3090 Small Diameter Stainless Steel Pipe 1Cr18Ni9Ti GB T3089 Stainless-steel super-thin thickness and seamless steel pipe 00Cr18Ni10 1Cr18Ni9Ti 00Cr17Ni14Mo2 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo3Ti GB T3639 Cold Rolled Precision Seamless Pipe 10 20 35 45 16Mn GB3094 Cold Rolled Seamless Specials Pipe ( Oval Square Rectangular Hexagon) 10 15 20 25 30 35 40 45 50 09MnV 16Mn 15Mnv YB T5053 Seamless Pipe For Automotive Bushing 45 45Mn2 40Cr 20CrNi3A GB T5312 Carbon Steel or Carbon Manganese Steel Seamless Pipe for Ship Building Q320 Q360 Q410 Q460 Q490 Q500 Q510 GB T3093 High Pressure Seamless Pipe For diesel engine 20A GB T8713 Precision In Diameter Seamless Steel Pipe For Fluid Power Cylinder 10 20 35 45 16Mn GB T3087 Seamless Steel Pipe For Low and Medium Pressure Boiler 10 20 GB T5130 Seamless Steel Pipe For High Pressure Boiler 20G 20MnG 25MnG 15MoG 20MoG 12CrMoG 15CrMoG 12Cr2MoG 12Cr1MoVG 12Cr2MoWVTiB 12Cr3MoVSiTiB 10Cr9Mo1VNb 1Cr18Ni9 1Cr19Ni11Nb GB T13296 Stainless Seamless Steel for Boiler and Heat Exchanger Tubes 0Cr18Ni9 1Cr19Ni9 00Cr19Ni10 2Cr23Ni13 0Cr23Ni13 0Cr23Ni13 2Cr25Ni20 0Cr17Ni12Mo2 1Cr17Ni12Mo2 0Cr17Ni14Mo2 0Cr19Ni13Mo3 00Cr19Ni13Mo3 1Cr18Ni9Ti 0Cr18Ni10Ti 1Cr18Ni11Ti 0Cr19Ni11Nb 1Cr19Ni11Nb 0Cr18Ni13Si4 1Cr18Ni12Mo2Ti 0Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo3Ti 0Cr26Ni5Mo2 1Cr17 00Cr27Mo 1Cr25Ti GB T6479 High Pressure Seamless Pipe For Chemical Fertilizer Equipment High Pressure seamless Pipe for Fertihzer Equipment 10 20G 16Mn 15MnV 10MoWVNb 12CrMo 15CrMo 1Cr5Mo 12Cr2Mo GB T9948 Seamlesss steel tube for petroleum cracking 10 20 12CrMo 15CrMo 1Cr2Mo 1Cr5Mo 1Cr19Ni9 1Cr19Ni11Nb YB T5052 Geological Drilling Pipe Seamless Pipe For Diamond Core Boring DZ65-27MnMoVB GB T17396 Hot Rolled Seamless Pipe For Hydraulic Cylinder 20 35 45 27SiMn 30MnNbRE BQB 232 Tubes for Perforating Gun WELDED PIPE GB T13793 Buttweld Electric Resistance Welded Pipe 08F 08 10F 10 15F 15 20 Q195 Q195A Q195B Q235A Q235B GB 11258 Fluoride Resin Coated Double Wall Steel Pipes for Automobiles 08 08F 08A1 GB T3091 Welded Pipe And For the Low Pressure Fluids & Galvanized(Zinc Coated)Welded Pipe And For the Low Pressure Fluids Q195 Q215 Q235A GB T3092 Welded Pipe And For the Low Pressure Fluids & Galvanized(Zinc Coated)Welded Pipe And For the Low Pressure Fluids Q195 Q215 Q235A GB T14980 Large Diameter Electric Welded For the Low Pressure Fluids For the Low Pressure Fluids Q215 Q235A Q235B GB T12771 Stainless Steel Welded Pipe For the Low Pressure Fluids 1Cr18Ni9 0Cr19Ni9 0Cr19Ni11 0Cr25Ni20 0Cr17Ni12Mo2 00Cr17Ni14Mo2 0Cr18Ni11Ti 0Cr18Ni11Nb 00Cr17 00Cr18Mo2 0Cr13 YB T4102 Welded Pipe For the Low Pressure Fluids For Low and Middle Boiler 10 20 YB 4103 Carbon Steel Tubes for Boiler and Heat Exchaner 10 YB T5209 Electric Resistance Welded Steel Pipe For Power Transmission Shaft 08Z 15TiZ 20Z 25Z GB T12700 Stainless Steel Welded Pipe For Machine Structural Purposed 00Cr19Ni11 00Cr17Ni14Mo2 0Cr19Ni9 1Cr18Ni9 1Cr18Ni9Ti 0Cr17Ni12Mo2 0Cr18Ni11Nb 0Cr25Ni20 1Cr17 1Cr15 0Cr13 1Cr13 GB T13792 Electric Welded Steel Pipe For Conveyor Support Q215 Q235 YB T4028 Pump Electric Welded Steel Pipe For Deep Subsurface Water GB T14291 Electric Welded Steel Pipe For Mining Fluid Q235A Q235B GB T3640 General Carbon Conduits Pipe Clip GB T3641 P3 Zinc Coated Metal Smoke Tube GB T3642 S type brazed Stainless Metal Smoke Tube 1Cr18Ni9Ti SGG262 Cold Rolled Minute Steel Pipe for Automobile, and Shock Absorber of Motorcycle 10 20 35 45

Page 64: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 64

Steel Pipe Specification

Pipe World Standards No. 13 OTHER STANDARD

EDM Electrode Tubes STAINLESS HOLLOW BAR DUPLEX STAINLESS STEEL PIPE AS 1074 STEEL TUBES AND TUBULARS FOR ORDINARY SERVICE AS 1163 STRUCTURAL STEEL HOLLOW SECTIONS UL 6 RIGID METAL CONDUIT ANSI C80.1 RIGID METAL CONDUIT CSA C22.2 RIGID METAL CONDUIT S45C PIPE (Carbon Steel for Machine Structural Use PIPE) HR PIPE (Hot Rolled Pipe) CR PIPE (Cold Rolled Pipe) CGI PIPE (Cold Rolled GalvanIzed Iron Pipe) HGI PIPE (Hot Rolled GalvanIzed Iron Pipe)

Page 65: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 65

Steel Pipe Specification

Pipe World Standards No. 14

Group of ASTM standards for steel pipes, tubes and fittings

Printable Version Abstract: This group of ASTM standard specifications covers various types of steel pipes, tubes and fittings for high-temperature service, ordinary use and special applications such as fire protection use. Specifications for steel tubes list standard requirements for boiler and superheater tubes, general service tubes, steel tubes in refinery service, heat exchanger and condenser tubes, mechanical and structural tubing. This article contains ASTM standards for various types of steel pipes which specify requirements for high-temperature service, ordinary use and special applications such as fire protection use. Specifications for steel tubes list standard requirements for:

Boiler and superheater tubes General service tubes Still tubes in refinery service Heat exchanger and condenser tubes Mechanical tubing and Structural tubing. New standards, which cover the general requirements for alloy and stainless steel pipes, and editorial form and style for writing product specifications are also included.

STEEL PIPES A53 A53/A53M-99b Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless A74 A74-98 Specification for Cast Iron Soil Pipe and Fittings A106 A106-99e1 Specification for Seamless Carbon Steel Pipe for High-Temperature Service A126 A126-95e1 Specification for Grey Iron Castings for Valves, Flanges, and Pipe Fittings A134 A134-96 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) A135 A135-97c Specification for Electric-Resistance-Welded Steel Pipe A139 A139-96e1 Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) A182 A182/A182M-99 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service A252 A252-98 Specification for Welded and Seamless Steel Pipe Piles A312 A312/A312M-00 Specification for Seamless and Welded Austenitic Stainless Steel Pipes A333 A333/A333M-99 Specification for Seamless and Welded Steel Pipe for Low-Temperature Service A335 A335/A335M-99 Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service A338 A338-84 (1998) Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650 癋 (345 癈) A358 A358/A358M-98 Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service A369 A369/A369M-92 Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service A376 A376/A376M-98 Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service A377 A377-99 Index of Specifications for Ductile-Iron Pressure Pipe A409 A409/A409M-95ae1 Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service A426 A426-92 (1997) Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service A451 A451-93 (1997) Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service A523 A523-96 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits A524 A524-96 Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures A530 A530/A530M-99 Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe A648 A648-95e1 Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe A674 A674-95 Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

Page 66: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 66

A691 A691-98 Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures A694 A694/A694M-00 Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service A716 A716-99 Specification for Ductile Iron Culvert Pipe A733 A733-99 Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples A742 A742/A742M-98 Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe A746 A746-99 Specification for Ductile Iron Gravity Sewer Pipe A760 A760/A760M-99 Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains A761 A761/A761M-98 Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches A762 A762/A762M-98 Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains A790 A790/A790M-99 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe A796 A796/A796M-99 Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications A798 A798/A798M-97a Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications A807 A807/A807M-97 Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications A810 A810-94 Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh A813 A813/A813M-95e2 Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe A814 A814/A814M-96 (1998) Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe A849 A849-99 Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe A861 A861-94e1 Specification for High-Silicon Iron Pipe and Fittings A862 A862/A862M-98 Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe A865 A865-97 Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints A872 A872-91 (1997) Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments A885 A885/A885M-96 Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe A888 A888-98e1 Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications A926 A926-97 Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe A928 A928/A928M-98 Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal A929 A929/A929M-97 Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe A930 A930-99 Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits A943 A943/A943M-95e1 Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes A949 A949/A949M-95e1 Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe A954 A954-96 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe A972 A972/A972M-99 Specification for Fusion Bonded Epoxy-Coated Pipe Piles A978 A978/A978M-97 Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications A984 A984/A984M-00 Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded A998 A998/A998M-98 Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications A999 A999/A999M-98 Specification for General Requirements for Alloy and Stainless Steel Pipe A1005 A1005/A1005M-00 Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded A1006 A1006/A1006M-00 Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

STEEL TUBES Boiler, Superheater, and Miscellaneous Tubes A178 A178/A178M-95 Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes A179 A179/A179M-90a (1996) e1 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes A192 A192/A192M-91 (1996) e1 Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service A209 A209/A209M-98 Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes A210 A210/A210M-96 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes A213 A213/A213M-99a Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes A249 A249/A249M-98e1 Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes A250 A250/A250M-95 Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes A254 A254-97 Specification for Copper-Brazed Steel Tubing A268 A268/A268M-96 Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service A269 A269-98 Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service A270 A270-98ae1 Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing A334 A334/A334M-99 Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service A423 A423/A423M-95 Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes A450 A450/A450M-96a Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes A608 A608-91a (1998) Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

Page 67: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 67

A618 A618-99 Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing A632 A632-98 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service A688 A688/A688M-98 Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes A771 A771/A771M-95 Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components A778 A778-98 Specification for Welded, Unanneled Austenitic Stainless Steel Tubular Products A789 A789/A789M-00 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service A803 A803/A803M-98 Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes A822 A822-90 (1995) e1 Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service A826 A826/A826M-95 Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components A847 A847-99a Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance A908 A908-91 (1998) Specification for Stainless Steel Needle Tubing A953 A953-96 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing

Heat-Exchanger and Condenser Tubes A179 A179/A179M-90a (1996) e1 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes A213 A213/A213M-99a Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes A214 A214/A214M-96 Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes A249 A249/A249M-98e1 Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes A498 A498-98 Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins A851 A851-96 Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes

Mechanical Tubing A511 A511-96 Specification for Seamless Stainless Steel Mechanical Tubing A512 A512-96 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing A513 A513-98 Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing A519 A519-96 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing A554 A554-98e1 Specification for Welded Stainless Steel Mechanical Tubing

Structural Tubing A500 A500-99 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes A501 A501-99 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing A847 A847-99a Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance A618 A618-99 Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing WELDING FITTINGS A234 A234/A234M-99 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service A403 A403/A403M-99a Specification for Wrought Austenitic Stainless Steel Piping Fittings A420 A420/A420M-99 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service A758 A758/A758M-98 Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness A774 A774/A774M-98 Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

Page 68: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 68

Flange Chemical Composition and

Mechanical Properties

CHEMICAL COMPOSITION ( IN PERCENTAGE ) Grade C

(Max) Mn (Max) P

(Max) S

(Max) Si

(Max)Cr Ni Mo Nitrogen

(Max) Cu/ Others

301 0.15 2.00 0.045 0.030 1.00 16.00 -

18.00

6.00 - 8.00

- 0.10 -

304 0.08 2.00 0.045 0.030 0.75 18.00 -

20.00

8.00- 10.50

- 0.10 -

304L 0.030 2.00 0.045 0.030 0.75 18.00 -

20.00

8.00- 12.00

- 0.10 -

310S 0.08 2.00 0.045 0.030 1.50 24.00-26.00

19.00 - 22.00

- - -

316 0.08 2.00 0.045 0.030 0.75 16.00 -

18.00

10.00 - 14.00

2.00 - 3.00

0.10 -

316L 0.030 2.00 0.045 0.030 0.75 16.00 -

18.00

10.00 - 14.00

2.00 - 3.00

0.10 -

317 0.08 2.00 0.045 0.030 0.75 18.00 -

20.00

11.00 - 14.00

3.00 - 4.00

0.10 -

317L 0.030 2.00 0.045 0.030 0.75 18.00 -

20.00

11.00 - 15.00

3.00 - 4.00

0.10 -

321 0.08 2.00 0.045 0.030 0.75 17.00 -

19.00

9.00 - 12.00

- 0.10 Ti5 ( C + N ) Min or 0.70 max

347 0.08 2.00 0.045 0.030 0.75 17.00 -

19.00

9.00 - 13.00

- - Cb= 10x ( C Min ) or 1.00 Max

409 0.08 1.00 0.040 0.010 1.00 10.50 -

11.75

0.50 - - Ti= 6x (C+ N ) Min or 0.70 Max

409M 0.03 0.81.2 0.030 0.030 0.40.75 11.00-12.00

1.5 max. - - Ti= 6x (C) Min or 0.70 Max

410S 0.08 1.00 0.040 0.030 1.00 11.50-13.50

0.60 - - -

410 0.15 1.00 0.040 0.030 1.00 11.50-13.50

0.75 - - -

420 0.35 0.50 0.035 0.015 0.50 12.00 -

13.00

0.20.3 - - -

430 0.12 1.00 0.040 0.030 1.00 16.00 0.75 - - -

Page 69: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 69

- 18.00

JSL AUS

0.08 7.08.0 0.070 0.030 0.75 15.50 -

16.50

4.25 - 4.75

- - 0.9 - 1.10

JS- 203

0.08 9.2510.25 0.070 0.030 0.75 14.25 -

15.25

2.25 - 2.75

- - 1.60- 2.0

301M 0.10 4.55.5 0.060 0.030 0.75 14.50 -

15.50

6.0 - 7.0 - - 1.70- 1.90

* Thickness of 1.27mm & below will have elongation of 20% min. MECHANICAL PROPERTIES

Hardness (Max) Grade Tensile Strength Mpa, (Min)

Yield Strength

Mpa, (Min)

%Age Elongation in 50mm

gauge length min

BHN Rb

301 515 205 40 217 95 304 515 205 40 201 92 304L 485 170 40 201 92 310S 515 205 40 217 95 316 515 205 40 217 95 316L 485 170 40 217 95 317 515 205 35 217 95 317L 515 205 40 217 95 321 515 205 40 217 95 347 515 205 40 201 92

409 380 170 20 179 88 409M 430 275 20 187 90 410S 415 205 22 183 89 410 450 205 20 217 89 420 700( max ) - 15 217 95 430 450 205 22 183 89

JSL AUS 515 205 40 217 95 JS- 203 515 205 40 217 95 301M 515 205 40 217 95

Page 70: 4.1 LIV API Smless Welded Stl Drill Casing Pipe CAT.S

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. Web site: http://www.livvalves.com 70

Lanus Industries LLC W.O USA