KrisTrack ® Full Line Catalogue • Revision (12) August 27, 2019 Track and Hardware Specialists PRINTED CATALOGUE MAY NOT BE UP TO DATE. ALWAYS REFER TO WEBSITE FOR MOST UP TO DATE CONTENT. TRACK AND HARDWARE FOR COMMERCIAL AND RESIDENTIAL DOOR APPLICATIONS BIFOLD DOOR TRACK, SLIDING DOOR TRACK, HARDWARE AND ACCESSORIES, POCKET DOOR FRAMES
84
Embed
TRACK AND HARDWARE FOR COMMERCIAL AND RESIDENTIAL DOOR … · line of specialty pocket door frames custom made in knock down, half knock down, and ready-made styles. ® ® Weathersealing
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KrisTrack® Full Line Catalogue • Revision (12) August 27, 2019
Track and Hardware Specialists
PRINTED CATALOGUE MAY NOT BE UP TO DATE. ALWAYS REFER TO WEBSITE FOR MOST UP TO DATE CONTENT.
TRACK AND HARDWARE FOR COMMERCIAL AND RESIDENTIAL DOOR APPLICATIONSBIFOLD DOOR TRACK, SLIDING DOOR TRACK, HARDWARE AND ACCESSORIES, POCKET DOOR FRAMES
Tomorrow’s Innovative Solutions for Today’s Doors & Windows
General Information & Terms
This KrisTrack® Catalogue supersedes all previous versions. Please visit www.KrisTrack.com for our full terms & conditions, freight, warranty, returns & allowances, claims policy, & other general information.
Product drawings throughout this catalogue are representations of the product size, dimensions, shape, etc. Changes & updates to this catalogue may occur without notice. This may include, but not limited to, specifications, product availability & product materials. A. K. Draft Seal Ltd. and KrisTrack® MFG. will not be held liable for any changes to this catalogue, or products depicted in this catalogue that may not match our CAD drawings.
KrisTrack® MFG., a division of A. K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Written notice of damages must occur within the warranty period. Liability shall be limited to the replacement of product or component determined to be defective & shall not include costs arising from removal or reinstallation of product. Cost of replacement shall not exceed original purchase price. No other claims will be allowed. In no event shall liability be extended to include punitive, incidental or consequential damages arising from use of KrisTrack® MFG. products. This is the sole warranty given by KrisTrack® MFG., a division of A. K. Draft Seal Ltd. No other warranty implied or expressed shall be allowed.
By purchasing our products you agree to our Terms & Conditions herein stated.
Draft Seal Co. was founded in 1960 by Anton Kamensek then incorporated in 1973 as A. K. Draft Seal Ltd. During the 1990s we became known by our trademark name DraftSeal®, the largest manufacturer of weatherstrip products in Western Canada. After his retirement in the early nineties, his son, Chris, who had been with the company since 1973, purchased DraftSeal® and started the KrisTrack® division. The year 2010 marked our 50th year in business as a manufacturer and supplier of weathersealing and door sill products for commercial and residential applications. In 2013 we introduced our new DS1 Storm - Sill System to comply with the new building code that requires exterior door sill systems to be tested for air, water and structural. We will be introducing our new DSF1 Accordion Screen, which is integrated with our DS1 Storm - Sill System. Our manufacturing centre in British Columbia, Canada, produces a line of weatherstrip and sill products for the pre-hung door industry as well as a do-it-yourself line of residential weatherstripping for the consumer market.
KrisTrack® Manufacturing Ltd., was formed in 1991 to compliment the DraftSeal® line of weathersealing and door sill products. KrisTrack®, a division of A. K. Draft Seal Ltd., manufactures and supplies sliding and bifold door track with accompanying hardware and accessories. Applications include residential and commercial. Our manufacturing centre in British Columbia, Canada, also produces a line of specialty pocket door frames custom made in knock down, half knock down, and ready-made styles.
® ®
Weathersealing Specialists Since 1960 - Weatherstripping, Thresholds, Sweeps & Astragals
Interior Track And Hardware For Sliding, Bifold And Pocket Doors
KT40 Series: Single Track For Sliding Doors, Ceiling Or Wall Mount
1-9/32” (32mm)
1-7/32”(31mm)
from top of trackto top of doormin = 2-1/8” (54mm)max = 2-3/8” (60mm)
KT40TRACK
1-3/8” (35mm) or1-3/4“ (44.45mm) or
2-1/4” (57mm)door thickness
KT102floor guide
31/64” (12.3mm)
min 3/16” (8mm)max 5/8” (15.8mm)
1”(25.4mm)
finished floor line
Ceiling mount
FULL SCALE
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
OPTIONS: KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels. KT146 wallmount brackets. KT151 face door mount bracket.
KT40 Series: Single Track For Sliding Doors, Ceiling Or Wall Mount
One Track, Three Hanger Choices:
OPTIONS Ceiling mount with hanger adapter
KT23 door bottom channel aluminum with pvc insert
KT127 roller guidefinished floor line
KT151hanger adapter
bracket, face-mounted on door
1-11/16”(43.5mm)
1-1/2”(38mm)
1-1/8”(28.5mm)
KT146 Wall-mount bracket (metal) for KT40 Series track, order separately
KT116 Adjustable bottom guide (metal & plastic) jamb mounted for wall mounted door 1-3/8” or 1-3/4” door thickness
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT35KIT for 1 door application: KT35HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting doors order two kits (KT35KIT) and two (KT125) intrack door stops.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT38KIT for 1 door application: KT38HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting doors order two kits (KT38KIT) and two (KT125) intrack door stops.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40KIT for 1 door application: KT40HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting doors order two kits (KT40KIT) and two (KT125) intrack door stops.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT107 jamb mounted metal guide for 1-3/8” (35mm) door thickness
3-1/4” (82mm)
1-3/8” (35mm)door thickness
KT40TRACK
3-1/2” (88.9mm)4-1/2” (114.3mm)
2-3/4”(71mm)
5/8”(17mm)
3/8”(9.5mm)
1-1/4” (31.7mm)
min = 2-1/8” (54mm)max = 2-3/8” (60mm)
1-9/32” (32mm)
1-7/32”(31mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
KT35PDKIT for 1 door application: KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT35PDKIT).Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT38PDKIT for 1 door application: KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT38PDKIT).Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40PDKIT for 1 door application: KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT40PDKIT).Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT23 door bottom channel
KT127 roller guidefinished floor line
KT40PDF Series: Single Track For Pocket Frames
KT122 Bumber stop, nail on, white, order separately.
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT50 Series: Track For Bypass Sliding Door, Ceiling Mount
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
KT53 Series: Triple Track For Multi-Sliding Doors, Ceiling Mount
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
The Multi-Slide interior sliding system is designed to slide shutters or doors in a residential or commercial applications. A number of doors may be installed as parallel sliding. Collectors can be used to pick up one panel with the next as they are operated.
Example of 3 door system
BOTTOM GUIDING OPTION 1
nylon collectors are fastened to top and bottom of panel stiles
PANEL SIZING Maximum recommended panel dimensions: width = 48” (1220 mm) wide height = 96” (2438 mm) high
3 doors parallel sliding clear past opening WALL
clearance range: min = 9/16” (14mm)max = 1-1/8” (28.5mm)
KT101 KT103
KT156
KT156
KT19
Orientation of spacers and shims is the same for either 1-3/8” or 1-3/4” door thickness
KT102
KT102
KT102
KT106
KT106
KT102
KT106
KT106
KT53 Series: Triple Track For Multi-Sliding Doors, Ceiling Mount
KTMS Series: Double Track For Sliding Doors, Ceiling Mount
2 doors parallel sliding clear past opening
11/32” (9mm)
1-3/8” (35mm)
KT40TRACK KT40TRACK
KT156
KT156KT114
KT19finished floor line finished floor line
WALL
WALL
The interior sliding door system is designed to slide shutters or doors in a residential or commercial applications. A number of doors may be installed as parallel sliding. Collectors can be used to pick up one panel with the next as they are operated.
Example of 2 door system
BOTTOM GUIDING OPTION 3
BOTTOM GUIDING OPTION 2
BOTTOM GUIDING OPTION 1
PANEL SIZING Maximum recommended panel dimensions: width = 48” (1220 mm) wide height = 96” (2438 mm) high
WALL
KT156
KT103KT101
31/64” (12.3mm)
1”(25.4mm)
KT102
KT102
finished floor line
min 5/16” (8mm)max 5/8” (15mm)
1-3/8” (35mm) 1-3/8” (35mm)
KT156 Collector (nylon) for Multi-Slide doors, two piece set. Not included wiht kit, order separately.
shim spacer
BOTTOM GUIDING OPTION 1
AB B
KT101KT103
WALL
A) spacer B) spacer & shim
KT156 (2 piece set)
nylon collectors are fastened to top and bottom of panel stiles
KT38SC (Soft Close) Residential Series: Single Track For Sliding Doors, Ceiling Mount
1-1/4” (32mm)
1-1/4”(32mm) vertical adjustment
from top of track
to top of doormin =
2-1/8” (54mm)max =
2-3/8”(60mm)
1-3/8” (35mm) or 1-3/4” (44.45mm)
door thickness
KT40TRACK
23/32”(18mm)1/4” (6mm)
FULL SCALE
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm) MIN & MAX DOOR THICKNESS: 1-3/8” to 1-3/4” (35mm to 44.45mm)
MAX DOOR HEIGHT: 84” (2134mm)TRACK: Extruded aluminum, mill finish. HANGER: Steel plated or cast carrier, 4 nylon wheels, ball bearing.
OPTIONS: KT5Fascia, extruded aluminum painted white, with end caps. KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
KT38SC (Soft Close) Residential Series: Single Track For Sliding Doors, Ceiling Mount KT38SC (Soft Close) Residential Series: Single Track For Sliding Doors, Ceiling Mount
KT5FASCIA optional fascia, painted white
Ceiling mount application
One Track, Two Hanger Choices:
KT38SOFTCLOSEH1 for 1 door application: (1 ea) Soft close assembly on one side, hanger on the other side, (1 ea) intrack stop, (2 ea) floor guides, (1 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 24” (610mm)
KT38SOFTCLOSEH2 for 1 door application: (2 ea) soft close assemblies, (2 ea) floor guides, (2 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 32” (813mm)
KT50SC Residential Series: Ceiling Mount Bypass Sliding Door Track & Hardware
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.4mm) MIN & MAX DOOR THICKNESS: 1-3/8” to 1-3/4” (35mm to 44.45mm)
MAX DOOR HEIGHT: 84” (2134mm)TRACK: Extruded aluminum, mill finish. HANGER: Steel carrier, plated, 4 nylon wheels, ball bearing.
OPTIONS: KT5FASCIA, extruded aluminum painted white, 10 lengths available. KT23 floor channel extruded aluminum, bronze anodized with PVC insert. Also available KT20 & KT19 floor channels.
KT50SC Residential Series: Ceiling Mount Bypass Sliding Door Track & Hardware KT50SC Residential Series: Ceiling Mount Bypass Sliding Door Track & Hardware
KT5FASCIA optional fascia
Room Partition Application - Ceiling Mount Closet Application
One Bipass Track, Two Soft Close Choices:
OPTIONS
Soft Close one direction
Soft Close both directions
KT38SOFTCLOSEH1 for 1 door application:(2 kits required for bipass application) (1 ea) Soft close assembly on one side, hanger on the other side, (1 ea) intrack stop, (2 ea) floor guides, (1 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 24” (610mm)
KT38SOFTCLOSEH2 for 1 door application:(2 kits required for bipass application) (2 ea) soft close assemblies, (2 ea) floor guides, (2 ea) soft close & auto release activator, (1 ea) wrench, installation sheet plus all screws.Max door weight: 80 lbs. (36 kg). Min door width: 32” (813mm)
KT47 Commercial Series: Wall Mount Sliding Door Track, Hardware & Fascia
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
One Track, Two Hanger Choices:KT38KIT for 1 door application: KT38HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40KIT for 1 door application: KT40HANGER (2 ea) hangers, KT102 (2 ea) floor mounted guide, KT113 (1 ea) adjustable bottom guide for wall mounted door, KT155 (1 ea) wrench, installation sheet plus all screws. Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
2X SINGLE TRACK FOR BYPASS APPLICATION. FAS-CIAS BOTH SIDES FOR ROOM DIVIDER APPLICATION.
KT60KIT for 1 door application: KT60HANGER (2 ea) quick release hangers, KT60FGUIDE (1 ea) floor guide, KT60STOP (2 ea) intrack stops, (1 ea) wrench, installation sheet plus all screws. Max door weight: 132 lbs. (60 kg) = 2 hangers
Bottom Guiding Options
KT23 door bottom channel
KT127 roller guidefinished floor line
QUICK RELEASE feature allows for fast and safe installation and adjustment of door. Hanger bolt snaps into bracket and holds while you’re making adjustments
KT6FC Fascia aluminum clear anodized
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
STEP 1hanger and bracket before assembly
STEP 2slide lever open STEP 3
slide bolt into slotSTEP 4release lever to lock in place
KT60 Commercial Series: Single Track For Sliding Doors, Ceiling Mount
For room divider application track is installed wall to wall, no open end of
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
KT116 Adjustable bottom guide (metal & plastic) for wall mounted 1-3/4” (44.45mm) door
KT23 door bottom channel
KT127 roller guidefinished floor line
KT114 Bottom guide (plastic), spring loaded, for KT19 floor channel
KT60KIT for 1 door application: KT60HANGER (2 ea) quick release hangers, KT60FGUIDE (1 ea) floor guide, KT60STOP (2 ea) intrack stops, (1 ea) wrench, installation sheet plus all screws. Max door weight: 132 lbs. (60 kg) = 2 hangers
Quick release feature allows for fast and safe installation and adjustment of door. Hanger bolt snaps into bracket and holds while you’re making adjustments
STEP 1hanger and bracket before assembly
STEP 2slide lever open STEP 3
slide bolt into slotSTEP 4release lever to lock in place
KT116 Adjustable bottom guide (metal & plastic), for doors up to 1-3/4” (45mm) thick
Jamb Mounted Guide for Wall Mounted Sliding Doors
3/16”(5mm)
KT116 guidejamb
1-3/8” (35mm) or1-3/4” (44.45mm)
door thickness
FULL SCALE
KT61 Commercial Series: Single Track For Sliding Doors, Wall Mount
KT31 Commercial Series: Ceiling mount overhead track system, for supporting trailing cables, industrial curtains, tarpaulins, short hall nets, etc.
KT31HANGER
KT158S hook
KT159leather strap
1-9/32” (32mm)
1-1/4”(32mm)
1”(25mm)
7-5/8”(195mm)
KT31HANGER
KT159 leather strap
Curtain or tarpaulin bolted to hangers by others. Hanger center should not exceed 15” (375mm)
MAXIMUM DOOR WEIGHT: 33 lbs (15kg) = one hanger.
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
KT70 Commercial Series: Ceiling Mount Sliding Door Track & Hardware
2-7/16” (62mm)
1-31/32”(50mm)
from top of track to top of doormin = 3” (76mm)max = 3-1/4” (82.5mm)
KT70HANGERSSKT70TRACK
1-3/8” (35mm), 1-3/4” (44.45mm) or 2-1/4” (57mm)door thickness
KT128 intrack door stop
KT70HANGERSS stainless steel carrier with 4 nylon wheels
KT70RPLATE Mounting plate only for KT70HANGERSS (replacement part)
MAXIMUM DOOR WEIGHT: 650 lbs (300 kg) = two hangers
MIN & MAX DOOR THICKNESS: 1-3/8” (35mm), 1-3/4” (44.45mm) or 2-1/4” (57mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.3mm)
TRACK: Extruded aluminum bronze or clear anodized.
KT41 Commercial Series: Ceiling Mount Sliding Door Track & Hardware
MAXIMUM DOOR WEIGHT: 385 lbs (175 kg) = 2 hangers (plated steel or stainless steel)
MIN & MAX DOOR THICKNESS:
Ceiling mount: 1-3/8” (35mm), 1-3/4” (44.45mm) or 2-1/4” (57mm). Wall mount: 1-3/8” (35mm) to 1-3/4” (44.45mm).
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6mm)
TRACK: Extruded aluminum, clear or bronze anodized.
OPTIONS: KT23 floor channel extruded aluminum, bronze anodized with PVC insert. KT142 wall mount bracket. KT147 face door mount bracket.
HARDWARE KITS: KT41KIT for single door application: KT41HANGER (2 ea) plated steel hangers, KT102 (2 ea) floor mounted guides, installation sheet plus all screws.KT41KITSS for single door application: KT82HANGERSS plated (2 ea) stainless steel hangers, KT102 (2 ea) floor mounted guides, installation sheet plus all screws.
KT51 Commercial Series: Ceiling Mount Bypass Door Track & HardwareMAXIMUM DOOR WEIGHT: 385 lbs (175 kg) = 2 hangers (plated steel or stainless steel)MIN & MAX DOOR THICKNESS: 1-3/8” (35mm) to 1-3/4” (44.45mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes, provided the weight of the door does not exceed the maximum hanger weight listed. Weight check on door panel should always be performed by either manually weighing the door or checking manufacturing specs.
VERTICAL ADJUSTMENT: 1/4” (6.3mm)
TRACK: Extruded aluminum, clear or bronze anodized.
KT34 Residential Series: Bi-Pass Door Track & Hardware
KT34FLATH Hanger (2 ea)
KT34OFFSETH Hanger (offset), 2 ea
KT106 convertible floor guide (1 ea)
KT166 Flush pull, chrome, 3/4” (20mm), 2 ea
1-3/16”(30mm)
5-5/16” (135mm)
finished floor line5/16” (8mm) 9/16” (14mm)
21/64” (8.3mm)
KT106floor mountedconvertible guide
2-19/64” (58.5mm)
min = 1-5/8” (41mm)max = 2” (51mm)
KT34TRACK
3/4” (19mm) or1-3/8” (35mm)door thickness
3/4” (19mm) or1-3/8” (35mm)door thickness
KT34KIT INCLUDES
2-19/64” (58.5mm)
KT5FASCIA (optional)
2-15/16” (74.7mm)
3” (7
6.3m
m)
1-17/64”(32mm)
KT34TRACK
FULL SCALE
MAX DOOR WEIGHT: 60 lbs (27 kg) = 2 hangers MIN & MAX DOOR THICKNESS: 3/4” (19mm) to 1-3/8” (35mm)VERTICAL ADJUSTMENT: 3/8” (9.5mm)TRACK: Extruded aluminum FASCIA: Extruded aluminum, painted white (optional)HANGER: Steel carrier plated, one plastic wheel, ball bearing.
HARDWARE KIT: KT34KIT for 2 door application KT34FLATH (2 ea) hangers, KT34OFFSETH (2 ea) hangers, KT106 (1 ea) convertible floor guide, KT166 (2 ea) chrome finger pulls, installation sheet plus all screws.
KT15 Commercial Series: Bifold Door Track & Hardware
hardware can accommodate3/4” (19mm) to
1-3/4” (44.45mm)door thickness
1-3/8” (35mm)door thickness shown
min =1/2” (12.7mm)max =7/8” (22mm)
from top of the trackto top of the doormin =1-13/16” (46mm)max =2-1/16” (52mm)KT40TRACK
KT15PIVOT
1-7/32”(31mm)
1-9/32” (32mm)
KT15HANGER
hinge by other
1-9/16” (40mm)
equal
equal
1-9/16” (40mm)
bottom of door to finished floor 5/8” (16mm)
1/4” (6mm) clearance edge of door to wall both sides
2 leafs= 1 door
KT15PIVOT Set,complete assembly
MAXIMUM DOOR WEIGHT: 120 lbs (55 kg) per bi-fold door (2 leafs)
MIN & MAX DOOR THICK-NESS: 3/4” (19mm) to 1-3/4” (44.45mm)
MAXIMUM CAPACITY: Max leaf width = 24” (609mm). Max door height = 96” (2834mm). For door leafs over 18” (457mm) wide and or over 33 lbs (15 kg) in weight, bottom guiding system must be used.
VERTICAL ADJUSTMENT: 1/4” (6mm)
TRACK: Extruded aluminum, mill finish.
HANGER / PIVOTS: Steel carrier, plated, 4 nylon wheels, ball bearing. Pivots are steel and nylon.
HARDWARE KITS: KT15KIT-2L for 2 leaf application KT15HANGER (1 ea), KT15PIVOT (1 ea) top and bottom pivots, KT189 (1 ea) knob, KT155 (1 ea) wrench, installation sheet plus all screws.
NOTE: For multiple leafs folding to one side use one KT15KIT-2L for the first 2 leafs and for each additional 2 leafs add one KT15HANGER & one KT189 bifold door knob.
MAXIMUM DOOR WEIGHT: 30 lbs (13.6 kg) per bifold door = 2 leafs
MIN & MAX DOOR THICKNESS: 3/4” (19mm) to 1-3/8” (35mm).
MAXIMUM CAPACITY: Max leaf width 24” (609mm). Max door height 80” (3032mm)
VERTICAL ADJUSTMENT: 3/8” (9.5mm).
TRACK: Extruded aluminum, painted white. KT193 (1 ea) top pivot bracket included in track up to and including 36” (914mm). Track lengths of 48” (1219mm) and greater include 2 brackets.
HANGER / PIVOTS: Steel and plastic.
HARDWARE KITS: KT10KIT for 1 door (2 leaf) application KT189 (1 ea) bifold door knob, KT190 (1 ea) bottom jamb bracket, KT191 (1 ea) door bottom pivot, KT192 (1 ea) top door pivot, KT193 Intrack top bracket (1 ea) included with top track, KT194 (1 ea) top roller guide, KT195 (1 ea) two leaf snugger, KT197 (1 ea) door aligner.
KT189 Bifold door knob, white plastic
KT195 2 leaf snugger (1 door)
KT10 Residential Series: Bifold Door Track & Hardware
KT197 Door aligner
min = 1” (25.4mm)max =1-3/8” (35mm)
35/64”(14mm)
1-1/32” (26mm)
min =1-1/16”(27mm)max =1-9/16”(40mm
KT10TRACK KT193KT192
KT190
hardware can accommodate3/4” (19mm) to1-3/8” (35mm)door thickness
1-3/8” (35mm)door thickness shown
finished floor line
KT193 Intrack top bracket (included with top track)
MAXIMUM DOOR WEIGHT: Weights listed next to each track
MIN & MAX DOOR THICKNESS: 1-3/8” (35mm) to 1-3/4” (44.45mm)
MAXIMUM CAPACITY: Width and height of the door may vary beyond standard sizes provided the weight of the door does not exceed the maximum weight listed .
VERTICAL ADJUSTMENT: Listed next to each track
TRACK & CHANNEL: Extruded aluminum, mill finish, clear or bronze anodized. Finishes listed below next to each track
HANGER: Steel carrier, plated, 4 nylon wheels, ball bearing or Stainless steel carrier, 4 nylon wheels, ball bearing (see below).
Specialty and Standard Pocket Door Wood Frame Selection
Standard Biparting Pocket Door Frame (RMBP) Standard Pocket Door Frame (HKD)Half Knock Down for Easy Transportation
Standard Pocket Door Frame (RM)
Specialty Pocket Door Frame RMPLY2 With Plywood One Side (custom order)
Specialty Pocket Door Frame RMPLY2 With Plywood Both Sides (custom order)
This custom frame has plywood on both sides for strength and allows towel bars, grab bars and cabinets to be installed on the pocket frame wall without compromising the integrity of the frame and wall.
KT-Frame Rm Or HKD Series: Pocket Door Wood Frames Single & Double
The RM (Ready Made style) is fully assembled for quick and easy installation. The HKD is designed for ease of shipping and to minimize storage requirements. Chance of frame damage during transport is lessened due to compact packaging. Flat jamb, bottom rail and header are strapped to frame cage as shown below. Assembly takes approximately 10 to 20 minutes.
Frames built for 4-1/2” (114.3mm) wall thickness are designed to hold doors 1-3/8” (34.92mm) thick. Frames built for 6-1/2” (165.1mm) wall thickness are designed to hold doors up to 1-3/4” (44.45mm) thick.
Hardware Kit not Included, order separately.
NOTE: replace all track screws with # 8 x 1-1/2” (38mm) screws (included) after frame is installed and before drywall.
2’4” x 6’8” (711mm x 2032mm)2’6” x 6’8” (762mm x 2032mm)2’8” x 6’8” (812mm x 2032mm)
1’6” x 6’8” (457mm x 2032mm)2’0” x 6’8” (609 mm x 2032mm)2’2” x 6’8” (660mm x 2032mm)
2’10” x 6’8” (63mm x 2032mm)3’0” x 6’8” (914mm x 2032mm)3’0” x 7’0” (914mm x 2134mm)
Standard size frames available in both single and double, for 4-1/2” (114mm) and 6-1/2” (165.1mm) wall thickness:
Custom made frames are available and are non returnable, consult factory.
RM (READY MADE) Complete assembled frame
KT steel stif fener (full height on split jamb)
55/64”(22mm)
7/16”(11mm)
A
A
BB
C
C
This section of wood is cut out
after installation
ONE FRAME, 2 OPTIONSHKD (HALF KNOCK DOWN) Half assembled frame
ROUGH OPENING (RO) RO in width: 2 times the door size plus 2” (51mm) RO in height: 4-1/4” (108mm) more than door height Double pocket door frame: 4 times door width, + 2” (50.8mm)
MAX DOOR WEIGHTKT35PDKIT: 100 lbs (45 kg) = 2 hangers (KT35HANGER) KT38PDKIT: 132 lbs (60 kg) = 2 hangers (KT38HANGER) KT40PDKIT: 220 lbs (100 kg) commercial application = 2 hangers (KT40HANGER)
KT122 Bumber stop, nail on, attach to frame
C
(Hardware kit not included with frame, order separately)(Hardware kit not included with frame, order separately)
KT-Frame Rm Or HKD Series: Pocket Door Wood Frames Single & Double
Example shown for standard 3’ (915mm) x 6’-8” (2032mm) doorTypical pocket door frame construction
84” (
2134
mm
)
84” (2134mm)
35-15/16” (913mm)
36-1/8” (918mm)
73-1/2” (1867mm)
35-1/2” (902mm)3/8” (10mm)
One Track, Three Hanger Choices:
KT35PDKIT for 1 door application: (Hardware kit not included with frame, order separately) KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT35PDKIT).Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT38PDKIT for 1 door application: (Hardware kit not included with frame, order separately) KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT38PDKIT). Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT40PDKIT for 1 door application: (Hardware kit not included with frame, order separately) KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors order two kits (KT40PDKIT).Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT107 jamb mounted metal guide for 1-3/8” (35mm) door thickness
KT1000 (2 x 4 Wall) / KT1100 (2 x 6 Wall) Series: Pocket in a Box
NOTE: After installing pocket frames, replace all track screws with #8 x 11/2” (38mm) screws (included), before drywall.
BA
A
55/64”(22mm)
7/16”(11mm)
KT steel stif fener (full height on rear uprights and front split jamb)
A
C
KT122 Bumber stop, nail on, attach to RO stud
ROUGH OPENING (RO) The width is calculated by multiplying the door width by two and adding 1” (25.4mm) IE: 36” x 2 = 72”; 72” + 1” = 73” opening (914mm x 2 = 1828mm); (1828mm + 25.4mm) Rough opening in height is 4-1/4” (108mm) more than door height.
MIN & MAX DOOR THICKNESS 3/4” (19mm) to 1-3/8” (35mm)
VERTICAL ADJUSTMENT 3/8” (9.5mm)
DOOR WIDTH & HEIGHT Width: 24” (609mm) to 36” (914mm) / Height: Up to 80” (2032mm)
TRACK Extruded aluminum, keyhole punched
HANGER Steel construction zinc plated, 4 plastic wheels
HARDWARE KIT included with pocket in a box
KT40TRACK
B
Floor bracket for 2 x 4 wall. For 2 x 6 wall thickness wood bracket supplied
1 x 4 rear uprights (split studs) with 2 steel stif feners
1 x 4 front split jamb with 2 steelstif feners
FLAT JAMB, HEAD TRIM AND SPLIT JAMB TRIM NOT INCLUDED WITH THE KT1000 / KT1100 SERIES POCKET IN A BOX
KIT INCLUDES:
KT107 Door guide (1 ea)
Hangers (2 ea)
KT155 wrench (1 ea)
KT122 Bumber stop, nail on (1 ea)
KT143 Floor bracket for KD pocket door frame split jamb
KT1000 (2 x 4 Wall) / KT1100 (2 x 6 Wall) Series: Pocket in a Box
One Track, Three Hanger Choices:
KT1035PDKIT: for 1 door application: (Hardware kit included with frame) KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1035PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT1038PDKIT for 1 door application: (Hardware kit included with frame) KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1038PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT1040PDKIT for 1 door application: (Hardware kit included with frame) KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1040PDKIT required and two KT125 intrack door stops required.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
Frame Kit1 header with KT40TRACK2 split stud 1 x 42 split jamb 1 x 44 galvanized steel stif feners1 fixed header end bracket1 adjustable header end bracket
Hardware Kit2 hangers (4 wheels each)1 jamb mounted door guide1 nail on door bumper2 floor brackets (jamb spacers)1 wrench, screws & instructions
WHAT’S IN THE BOX: COMPONENT LIST
KT1035-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1035-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1038-1 2'-0" to 3'-0" x 6’-8" 132 lbs
KT1038-2 2'-0" to 3'-0" x 7’-0" 132 lbs
KT1040-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1040-2 2'-0" to 3'-0" x 7'-0" 220 lbs
KT1135-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1135-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1138-1 2'-0" to 3'-0" x 6'-8" 132 lbs
KT1138-2 2'-0" to 3'-0" x 7'-0" 132 lbs
KT1140-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1140-2 2'-0" to 3'-0" x 7'-0" 220 lbs
POCKET IN A BOX - KT40TRACKFor 4-9/16” wall (116mm), 1-3/8” (35mm) door thickness. Flat jamb, head trim & split jamb not included.
For 4-5/8” to 7-1/4” (117.5 to 184mm) wall, 1-3/4” (44.45mm) door thickness. Flat jamb, head trim & split jamb not included.
KT1200 (2 x 4 Wall) / KT1300 (2 x 6 Wall) Series: Pocket in a Box
ROUGH OPENING (RO) The width is calculated by multiplying the door width by two and add 1” (25.4mm) IE: 36” x 2 = 72”; 72” + 1” = 73” opening (914mm x 2 = 1828mm); (1828mm + 25.4mm) Rough opening in height is 4-1/4” (108mm) more than door height
MIN & MAX DOOR THICKNESS 3/4” (19mm) to 1-3/8” (35mm)
VERTICAL ADJUSTMENT 3/8” (9.5mm) for KT1250 & KT1258
TRACK Extruded aluminum, keyhole punched
HANGER Steel construction zinc plated, 4 plastic wheels.
HARDWARE KIT Included in pocket in a box
A
C
D
55/64”(22mm)
7/16”(11mm)
KT steel stif fener (full height on rear uprights )
A
KT40TRACK
HEAD TRIM AND SPLIT JAMB TRIM INCLUDED WITH THE KT1200 / KT1300 SERIES POCKET IN A BOX. FLAT JAMB NOT INCLUDED
NOTE: After installing pocket frames, replace all track screws with #8 x 11/2” (38mm) screws (included), before drywall.
Floor bracket for 2 x 4 wall. For 2 x 6 wall thickness wood bracket supplied
1 x 4 split jamb with split jamb trim
split jamb trim
B
D
head trim
KT122 Bumber stop, nail on, attach to RO stud
C
KIT INCLUDES:
KT107 Door guide (1 ea)
Hangers (2 ea)
KT155 wrench (1 ea)
KT122 Bumber stop, nail on (1 ea)
KT143 Floor bracket for KD pocket door frame split jamb
(pocket in a box) (2 ea)
1 x 4 rear uprights (split studs) with 2 steel stif feners
KT1200 (2 x 4 Wall) / KT1300 (2 x 6 Wall) Series: Pocket in a Box
One Track, Three Hanger Choices:
KT1035PDKIT: for 1 door application: (Hardware kit included with frame) KT35HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1035PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 100 lbs. (45 kg) = 2 hangers
KT1038PDKIT for 1 door application: (Hardware kit included with frame) KT38HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1038PDKIT required and two KT125 intrack door stops required.Residential, max door weight: 132 lbs. (60 kg) = 2 hangers
KT1040PDKIT for 1 door application: (Hardware kit included with frame) KT40HANGER (2 ea) hangers, KT107 (1 ea) jamb mounted guide, KT143 floor brackets (2 ea), KT122 nail on bumper stop (1 ea), KT155 (1 ea) wrench, installation sheet plus all screws. For biparting pocket doors two KT1040PDKIT required and two KT125 intrack door stops required.Commercial, max door weight: 220 lbs. (100 kg) = 2 hangers
KT1235-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1235-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1238-1 2'-0" to 3'-0" x 6'-8" 132 lbs
KT1238-2 2'-0" to 3'-0" x 7'-0" 132 lbs
KT1240-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1240-2 2'-0" to 3'-0" x 7'-0" 220 lbs
KT1335-1 2'-0" to 3'-0" x 6'-8" 100 lbs
KT1335-2 2'-0" to 3'-0" x 7'-0" 100 lbs
KT1338-1 2'-0" to 3'-0" x 6'-8" 132 lbs
KT1338-2 2'-0" to 3'-0" x 7'-0" 132 lbs
KT1340-1 2'-0" to 3'-0" x 6'-8" 220 lbs
KT1340-2 2'-0" to 3'-0" x 7'-0" 220 lbs
POCKET IN A BOX - KT40TRACKFor 4-9/16” wall (116mm), 1-3/8” (35mm) door thickness. Includes head trim & split jamb.
For 4-5/8” to 7-1/4” (117.5 to 184mm) wall, 1-3/4” (44.45mm) door thickness. Includes split jamb.
Frame Kit1 header with KT40TRACK2 bevelled head trim2 split stud 1 x 42 split jamb 1 x 42 split jamb trim4 galvanized steel stif feners1 fixed header end bracket1 adjustable header end bracket
Hardware Kit2 hangers (4 wheels each)1 jamb mounted door guide1 nail on door bumper2 floor brackets (jamb spacers)1 wrench, screws & instructions
Wallmount Rail System & Sliding Door Hardware For Wood Doors
KTA2 Open Rail (Round) Track System TM Series: for wood doors (rollers are top mounted)KTA2 Open Rail (Round) Track System FM Series: for wood doors (rollers are door face mounted)
KTA2 Open Rail (Round) Track System & Hardware for Wood Doors
FACE MOUNT APPLICATION - MAX DOOR WEIGHT: 210 LBS (95 KG)
1-3/8”(35mm)
or1-3/4”
(44.45mm)door
thickness
15/32”(11.6mm)
from wall toface of door.
If more clearanceis required thenbracket spacers
are available
1-25/32”(45mm)
8-9/32”(210.5mm)
2-5/32”(55mm)
finished floor line
9/32”(7mm)
25/32”(20mm)
wallmountbracket
screw and plug
doorstop
roller
hangeranti-jump pin
roundrail
wall
HALF SCALE
19-11/16” (500mm)19-11/16” (500mm)
19-11/16” (500mm)
79-3/32” (2009mm)
19-11/16” (500mm)19-11/16” (500mm)
98-25/32” (2509mm)
19-11/16” (500mm)19-11/16” (500mm)
2 track lengths available
KTA2RAILCON Connector piece, connects 2 pieces of rail end to end. Order separately.
Each kit includes: 1 track 4 brackets (78” track) or 5 brackets (98” track) 2 rollers / hangers 1 guide2 door stopsNOTE: Individual replacement parts available
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KT116 Guide1-3/4” (44.45mm)
door thickness
9/16” (15mm)KTSD15SPACER Optional spacer not included with kit, order separately
KTA2ROLLERFMRoller & hangerassembly, ball bearing
KTA2ROLLERFMRoller & hangerassembly, ball bearing
1”(25mm)
KTA2FGUIDESS Floor guide, metalKTA2FGUIDESSBLACK black
KTA2SS78FMKIT A2 Round rail, stainless steel, 78” with 4 brackets, 2 door stops, 2 hangers face mount, 1 guideKTA2BL78FMKIT A2 Round rail, black, 78” with 4 brackets, 2 door stops, 2 hangers face mount, 1 guideKTA2SS98FMKIT A2 Round rail, stainless steel, 98” with 5 brackets, 2 door stops, 2 hangers face mount, 1 guideKTA2BL98FMKIT A2 Round rail, black, 98” with 5 brackets, 2 door stops, 2 hangers face mount, 1 guideNOTE: For biparting double doors, 2 of the above kits are required plus one connector piece (KTA2RAILCON)KTA2RAILCONSS A2 Connector piece, stainless steel, for joining 2 rails end to endKTA2RAILCONSSBL A2 Connector piece, black, for joining 2 rails end to end
KTA2 Open Rail (Round) Track System & Hardware for Wood Doors
TOP MOUNT APPLICATION - MAX DOOR WEIGHT: 187 LBS (85 KG)
4-1/32”(102.5mm)
1-5/32”(29.3mm)
from wall toface of door.
9/32”(7mm)
25/32”(20mm)
finished floor line
1-3/8”(35mm)
or1-3/4”
(44.45mm)door
thickness
hanger
roundrail
wallmountbracket
screw andplug
roller
door stop
anti-jumppin
wall
HALF SCALE
KTA2SS78TMKIT A2 Round rail, stainless steel, 78” with 4 brackets, 2 door stops, 2 hangers top mount, 1 guideKTA2BL78TMKIT A2 Round rail, black, 78” with 4 brackets, 2 door stops, 2 hangers top mount, 1 guideKTA2SS98TMKIT A2 Round rail, stainless steel, 98” with 5 brackets, 2 door stops, 2 hangers top mount, 1 guideKTA2BL98TMKIT A2 Round rail, black, 98” with 5 brackets, 2 door stops, 2 hangers top mount, 1 guideNOTE: For biparting double doors, 2 of the above kits are required plus one connector piece (KTA2RAILCON)KTA2RAILCONSS A2 Connector piece, stainless steel, for joining 2 rails end to endKTA2RAILCONSSBL A2 Connector piece, black, for joining 2 rails end to end
KTA2FGUIDESS Floor guide, metalKTA2FGUIDESSBLACK black
19-11/16” (500mm)19-11/16” (500mm)
19-11/16” (500mm)
79-3/32” (2009mm)
19-11/16” (500mm)19-11/16” (500mm)
98-25/32” (2509mm)
19-11/16” (500mm)19-11/16” (500mm)
2 track lengths available
KTA2RAILCON Connector piece, connects 2 pieces of rail end to end. Order separately.
Each kit includes: 1 track 4 brackets (78” track) or 5 brackets (98” track) 2 rollers / hangers 1 guide2 door stopsNOTE: Individual replacement parts available
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KTA7 Open Rail (FLat) Track System & Hardware for Wood Doors
Featuring the BOM Black roller, stronger than nylon.
FACE MOUNT APPLICATION - MAX DOOR WEIGHT: 220 LBS (100 KG)
3-17/32”(90mm)
11-13/32”(290mm)
hanger
1-9/16”(40mm)
Anti-jumpdisc
1-3/8”(35mm)
doorthickness
door stoproller
flat rail
screw & plug
17/32”(13.3mm)
27/32”(21.3mm)
from wall toface of door.
If more clearance
is requiredbracket spacers
are available
finishedfloor line
wall
HALF SCALE
KTA7SS78FMKIT A7 Flat bar, stainless steel, 78” with 5 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7BLACK78FMKIT A7 Flat bar, black, 78” with 5 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7SS98FMKIT A7 Flat bar, stainless steel, 98” with 6 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7BLACK98FMKIT A7 Flat bar, black, 98” with 6 brackets, 2 hangers face mount, 1 guide, 2 door stopsKTA7SS156FMKIT A7 Flat bar, stainless steel, 2 x 78” with connector piece = 156” length with hardware for 2 doorsKTA7BLACK156FMKITA7 Flat bar, black, 2 x 78” with connector piece = 156” length with hardware for 2 doorsKTA8S10MMSS Spacer, brushed stainless steel, 13/32” (10mm) thickKTA8S10MMBL Spacer, black electro plating over s.s., 13/32” (10mm) thick
Each kit includes:1 track 5 brackets (78” track) or 6 brackets (98” track)2 rollers / hangers1 guide2 door stopsNOTE: Individual replacement parts available
KTA7FGUIDE Floor guide, plastic
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KT116 guide
KTA8S10MMOptional spacer not
included with kit, order separately
13/32” (10mm)
KTA7ROLLERFMRoller & hangerassembly, ball bearing
KTA7ROLLERFMRoller & hangerassembly, ball bearing
1-1/8”(28.5mm)
3” (80mm)
1-3/5”(40mm)
Connector piece, connects 2 pieces of flat bar end to end to extend length for biparting doors. Total = 156" (3962mm) length. See KTA7SS156FMKIT & KTA7BLACK156FMKIT below.
both flatbars come predrilled and ready for assembly
Featuring the BOM Black roller, stronger than nylon.
TOP MOUNT APPLICATION - MAX DOOR WEIGHT: 220 LBS (100 KG)
KTA7 Open Rail Track (FLat) System & Hardware for Wood Doors
1-3/8”(35mm)
doorthickness
4-5/8”(117.5mm)
finished floor line
Anti-jumpdisc
11/16”(17.8mm)
from wall toface of door.
if more clearanceis required thenbracket spacers
are available
wall
screw & plugroller
hanger
doorstopflat rail
KTA7SS78TMKIT A7 Flat bar, stainless steel, 78” with 5 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7BLACK78TMKIT A7 Flat bar, black, 78” with 5 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7SS98TMKIT A7 Flat bar, stainless steel, 98” with 6 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7BLACK98TMKIT A7 Flat bar, black, 98” with 6 brackets, 2 hangers top mount, 1 guide, 2 door stopsKTA7SS156TMKIT A7 Flat bar, stainless steel, 2 x 78” with connector piece = 156” length with hardware for 2 doorsKTA7BLACK156TMKIT A7 Flat bar, black, 2 x 78” with connector piece = 156” length with hardware for 2 doors
HALF SCALE
Each kit includes:1 track 5 brackets (78” track) or 6 brackets (98” track)2 rollers / hangers1 guide2 door stopsNOTE: Individual replacement parts available
KT116 Optional adjustable bottom guide (metal & plastic). Order separately.
KTA7FGUIDE Floor guide, plastic
KTA7ROLLERTMRoller & hangerassembly, ball bearing
KTA7ROLLERTMRoller & hangerassembly, ball bearing
KT116 guide
both flatbars come predrilled and ready for assembly
Kit supplied as shown above
1-1/8”(28.5mm)
3” (80mm)
1-3/5”(40mm)
Connector piece, connects 2 pieces of flat bar end to end to extend length for biparting doors. Total = 156" (3962mm) length. See KTA7SS156TMKIT & KTA7BLACK156TMKIT below.
A8 Open Rail Track System for Sliding Doors, All Stainless Steel
1/4” (6mm)
KT23 channel with PVC insert
finished floor line
1-3/4”(44.5mm)
1-1/32”(26mm)
2”(51mm) 1-1/32”
(26.6mm)
5-23/32”(145mm)
1-3/8”(35mm)
1-5/16” (33.6mm)
2-21/32”(67.5mm)
track spacers
����������������=door height +2-1/4” (57mm)
3/16”(5mm)
KT116 guide
finished floor line
1-3/4”(44.5mm) jamb
1-1/32”(26mm)
2”(51mm) 1-1/32”
(26.6mm)
5-23/32”(145mm)
1-3/8”(35mm)
1-5/16” (33.6mm)
2-21/32”(67.5mm)
track spacers
����������������=door height +
2-3/16”(55.5mm)
2-21/32”(67.5mm)
5-23/32”(145mm)
11-13/16”(300mm)
6-13/32”(155mm)
5/8”(16mm)
1-3/4”(44.5mm)
heightdimension =door height +2-1/4” (57mm)
1-3/8”(35mm)
track spacers
2-1/32”(51mm)
11/16”(17.6mm)
1/4”(6mm)
floor channel flush with finished floor
7/8”(22mm)
15/16” (24mm)
KT23 channel with PVC insert
ARCHITECTURAL SPECIFICATIONS
Max door weight: 650 lbs (300kg) = 2 carriers Max door thickness: 2-1/4” (57.15mm) Max door width: 144” (12 ft / 3658mm)Max door height: 144” (12 ft / 3658mm)
TOP MOUNT SIDE VIEW FACE MOUNT SIDE VIEW
OPTION 1Channel installed into bottom of grooved door, KT127 roller guide mounted to floor
OPTION 2Guide fastened to jamb
OPTION 3Roller guide mounted to bottom of door
KTA8 Door stop
Open rail: flat bar stainless steel 304 (brushed or black) Carriers: all stainless steel (face mount or top mount)Door stop: all stainless steel with rubber bumpers Floor channel: aluminum with pvc channel insert, bronze anodizedGuides: jamb mounted or floor mounted or bottom of door mounted
PANEL SIZINGWeight dictates door dimensions, however for panels over 10 ft. (3000mm) wide, use three carriers for additional lateral support. If using three, adjust the middle carrier high to avoid it bearing any load.
KTA8FACEFCSS Carrier, face mounted on door, brushed stainless steel.KTA8FACEFCBL Carrier, face mounted on door, black electro plating over stainless steel.
KTA8 Open Rail, Flat Bar Track, Stainless Steel 304
KTA8 Spacers, Stainless Steel
FULL SCALE
KTA8SPACERSS Spacer, brushed stainless steel.KTA8SPACERBL Spacer, black electro plating over stainless steel.
NOTE: Spacers not included with KTA8 open rail, order separately.
NOTE: All spacers supplied with mounting fasteners
NOTE: KTA8 open rail sold as complete system only: track, carriers, stops & guides
4” (102mm)
1-3/8” (35mm)
1-5/16” (33.5mm)
7/16” (11mm)
13/32” (10mm)
2” (50.8mm)
2” (50.8mm)
2” (50.8mm)
3/16” (5mm)
3/16” (5mm)
3/16” (5mm)
1-11/32” (34mm)
KTA8 Top railBrushed stainless steel Available with mounting holes (standard) or without mounting holes (special order)
KTA8TOPRAIL84SSBrushed stainless steel
KTA8TOPRAIL108SSBrushed stainless steel
KTA8TOPRAIL118BLBlack electro plate over stainless steel
KTA8TOPRAIL132SSBrushed stainless steel
KTA8TOPRAIL156SSBrushed stainless steel
KTA8TOPRAIL180SSBrushed stainless steel
84” (2133mm)
108” (2743mm)
118” (2997mm)
132” (3352mm)
156” (3962mm)
180” (4572mm)
All 16” (406mm) on center
All 16” (406mm) on center
15”(381mm)
15”(381mm)
11”(279mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
16”(406mm)
10”(254mm)
10”(254mm)
3” (76mm)both ends
KTA8TOPRAIL84BLBlack electro plate over stainless steel84” (2133mm)
15”(381mm)
16”(406mm)
3” (76mm)both ends
3” (76mm)both ends
3” (76mm)both ends
3” (76mm)both ends
All 16” (406mm) on center
All 16” (406mm) on center
All 16” (406mm) on center
All 16” (406mm) on center All 16” (406mm) on center
3” (76mm) both ends
19” (482mm)
Black electro plate over stainless steelOnly available with mounting holes
KTA8S10MMSS Spacer, brushed stainless steel, 10mm thick.KTA8S10MMBL Spacer, black electro plating over stainless steel,10mm thick.Use with KTA8SPACERSS or KTA8SPACERBL
KTA2RAILCONSS Connector piece, brushed stainless steel, connects 2 pieces of track end to end. KTA2RAILCONSSBL black finish over stainless steel.Order separately.
NOTE: For biparting double doors, 2 kits required plus one connector piece (KTA2RAILCON)
• Weightless• Very user friendly• Minimal wear• Smooth and noiseless• Space saving• Hygienic and aesthetic• No doorstep• Withstands rough handling• Minimal chance of malfunction• Lifetime warranty on magnetic action
If the standard designs do not work for you, then Mondoor® has a unique patented profile system that offers easy and affordable solutions for your custom size needs.
You have the option of choosing either a front-of-wall system (wall or ceiling mounted) or an in-wall system (pocket door frame).
Mondoor® brings you the door of the future. It doesn’t revolve or even slide; a Mondoor floats. The floating door is suspended in magnetic fields, giving it a weightless feel and making it very smooth to handle and comfortable to use. No wonder everybody is going for the Mondoor®.
By HEALTH CARE, COMMERCIAL & RESIDENTIAL.
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
KT172-80 For doors up to 80 lbs. (36 kg)
3-3/32” (79mm)
5/8” (16mm)15/16”(24mm)
spring loaded plunger
Bumper Stop / Spring Loaded Auto Return for Mondoor Pocket Frame
Bore hole size 11/16” ( ) x 3-1/4” (83mm) Location of hole is 3” (76mm) up from center of door
Positive locking lever optional if requiredSatin finish on aluminum or brushed stainless steel
Mondoor header detail. The Mondoor® patented magnetic system ison top of the door.
For all of its floating door systems, Mondoor® of fers a lifetime warranty on the magnetic action, which makes the Mondoor® the perfect solution for high traffic areas.
Health care application
Optional Door Pull
Dull chrome, dark bronze powder coat and bright chrome
LOCKS OR PULLS NOT INCLUDED, ORDER SEPARATELY.
Pocket Door Privacy or Passage Set
Door edge finger pull included
Brushed stainless steel
By HEALTH CARE, COMMERCIAL & RESIDENTIAL.
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
Facilitates moving patients from room to room through door ways without compromising or affecting the functionality of the sliding pocket door.
Ceiling Mounted Track & Lift
Mondoor metal pocket frame (satin coated steel 16 gauge) installed into wall. Pocket frame to be boarded vertically.
Experience the comfort of weightlessWith its revolutionary floating door system, Mondoor® has done away with the disadvantages of the traditional revolving and sliding doors. Aside from flexibility and reliability, the floating door and metal frame (satin coated steel 16 gauge) excel in both quality and hygiene. Plus, they save space. And since a closed magnetic circuit is used, there is no risk of affecting any equipment nearby.
HEALTH CARE, COMMERCIAL & RESIDENTIAL.By
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)
STANDARD SIZES (20 STOCK SIZES AVAILABLE, REFER TO PRICE LIST): WIDTHS: 28” (711mm), 30” (762mm), 32” (813mm), 34” (864mm) & 36” (914mm). HEIGHTS: 80” (2032mm), 84” (2134mm), 90” (2286mm) & 96” (2438mm). In wall system (pocket door frames) can be custom built to suit max door size of 54” (1371mm) x 116” (2946mm). Front of wall system (wall or ceiling mount) are custom built to suit max door size of 72” (1829mm) x 120” (3048mm)Maximum door weight = 190 lbs (86 kg). Sizes not listed above & lift system are custom made, call for quote.
A B
A B
Cross sectionA - A
Cross sectionB - B
32” (813mm)
35” (889mm)
83.4
” (2
118m
m) f
ram
e he
ight
5” (127mm)
23”(584mm)
25-1/2”(648mm)
27”(686mm)
80”
(203
2mm
) fra
me
heig
ht
81-3
/4”
(207
6.45
mm
) cle
ar o
peni
ng
Door in pocket with handle
5-23
/32”
(145
mm
)
3-19
/32”
(91m
m)
2-13
/64”
(56m
m)
4” (101mm)
31” (787mm)clear opening
36” (914mm)door width
74-1/8” (1883mm)frame OSM width
Door in pocket with flush pull
5-23
/32”
(145
mm
)
3-19
/32”
(91m
m)
2-13
/64”
(56m
m)
36” (914mm)door width
74-1/8” (1883mm)frame OSM width
35” (889mm)clear opening
Dimensions below for a typical frame for a 36” (914mm) x 80” door (2032mm)
R.O. = 2 x door width plus 3” (76mm).Door height plus 5” (127mm) = R.O. height. Based on 3/4” (19mm) finished flooring thickness.
Typical gapping under door to finished floor = 11/16” (17mm). Pocket frame is installed on top of finished floor. If finished floor is not installed before pocket frame installation, then frame will be shimmed up for floor thickness.
Plywood can be applied to one side or both sides of pocket frame cage. Call for plywood pricing. Frame designed for 1/2” (12.7mm) or 5/8” (15.8mm) drywall.
Mondoor® Floating Pocket Door - Frame Systems can only be installed by certified Mondoor® Installers.
Mondoor® Pocket Frame includes: Magnets for top of door and all trim is included for both sides of frame. Trim available in 3 standard powder coated finishes: white, slate grey & bronze (RAL).Custom colors or wood grain also available, call for quote. Frame available fully assembled or KD.KD frame has to be riveted together on the job site. Rivets are supplied.
PLEASE NOTE: door panel for Mondoor® pocket frame by other, not included.
Closed Door
5-11
/16”
(145
mm
)
3-5/
8” (9
2mm
)fr
ame
dept
h2-
11/6
4” (5
5mm
)
1-3/8” (35mm) or 1-3/4” (44.45mm)
door thickness35”
clear opening36”
door width
74-1/8” (1883mm)frame OSM witdh
2-3/4” (70mm)
1-3/
4” (4
5mm
)
3-1/4” (82.5mm)
2-1/
8” (5
4.5m
m)
MONDOOR FRONT OF WALL SYSTEM, CEILING OR WALL MOUNT
HEALTH CARE, COMMERCIAL & RESIDENTIAL.By
FLOATING POCKET DOOR - FRAME SYSTEMSIn wall system (pocket door frame) or front of wall system (face-mount)