This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
WWW.DRAF TSEAL .COM | INFO@DRAF TSEAL .COM
Head Office: Vancouver, Canada | Branch Offices: Toronto, Canada & Los Angeles, USA
DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION
DS725BEADAE150 aluminum mill finishDS725BEADDE150 bronze anodized 150” (3810mm) length only
Main cover cap pvc (snap-on)
Main sill assembly: PVC substrate available in tan only. Aluminum sill available in 2 colours: mill finish (A) & bronze anodized (D)
DS725CAPTVE150 tanDS725CAPBLVE150 black150” (3810mm) length only
DS725AV150 7-1/4” sill x 150” or DS696AV150 6-9/16” sill x 150” or DS496AV150 4-9/16” sill x 150”
When Ordering DS1 Storm - Sill System, ELEVEN (11) Components Are Required To Assemble A Complete Sill:
1
3
6
9 10 11
7 8
4 5
2
1 PVC main cover cap & interior cover cap - included 7 Sill to jamb sealing gaskets - order separately2 Main sill assembly (substrate / aluminum) with weep hole covers - included 8 Head jamb to side jamb gaskets - order separately3 TPV Foam continuous cornering weatherseal - order separately 9 Strike plate and cup for double door- order separately4 Aluminum sill bead - not included order separately 10 Protective PVC Sill Covers- order separately5 Aluminum sill nose extensions: 1”(25.4mm), 2”(50.8mm), 3”(76.2mm) order separately 11 Interior substrate cover cap - included6 Plastic sill nose extension end caps - order separately
Sill nose extension end caps
Strike plate and cup for inswing or outswing double doors using DS1 storm sills and astragals.
Sill to jamb gasket (adhesive both sides) Head jamb to side jamb gasket