Touch Interface with universal video converter _V100709 This interface can converter touch panel signals into DVD /TV IR signals, or iPod control signal, so when people watch DVD inside a car, he does not need a remote controller any more. This interface can also be programmed to a new Remote controller in the installation process. The various versatile video conversion inside makes this interface suitable for almost every car which has a video or RGB input. The main features are: 1. People can enjoy DVD or video source without remote controller while dirct touching the icons on top of the screen.Dedicated icons are mixed inside the video stream for easy read and touch operations. 2. Several video source can added onto a single screen without added extra keypad to select them. 3. This interface has a programing function which allows a new remote controller to be recorded. 4. This is a an upgrade version from Navlinkz FV-02 and FV-09 video converter which haven been sold for several years, it is very versatile and easy for installers in video conversion purposes while installed in almost whatever car which has a video or RGB input connector, and it can handle almost all video input[NTSC,PAL,SECAM, in CVBS or RGB], while offer a very stable standard video output. 5. Multi-point touch screen calibration algorithm inside makes this interface can be installed with almost every screen, no matter original touch screen or added. 1. System structure: camera 6Pin power Navi RGB Video input Analog to Digital convert er 64 Mega bit Dynamic memory Touch icon generation: Video output Digital to Analog conver ter RGB CVBS 800X480 touch IR output CVBS
11
Embed
Touch Interface with universal video converter V100709
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Touch Interface
with universal video converter _V100709
This interface can converter touch panel signals into DVD /TV IR signals, or iPod control signal, so when people watch
DVD inside a car, he does not need a remote controller any more. This interface can also be programmed to a new Remote
controller in the installation process. The various versatile video conversion inside makes this interface suitable for
almost every car which has a video or RGB input.
The main features are:
1. People can enjoy DVD or video source without remote controller while dirct touching the icons on top of the
screen.Dedicated icons are mixed inside the video stream for easy
read and touch operations.
2. Several video source can added onto a single screen without
added extra keypad to select them.
3. This interface has a programing function which allows a new
remote controller to be recorded.
4. This is a an upgrade version from Navlinkz FV-02 and FV-09
video converter which haven been sold for several years, it is very
versatile and easy for installers in video conversion purposes while
installed in almost whatever car which has a video or RGB input connector, and it can handle almost all video
input[NTSC,PAL,SECAM, in CVBS or RGB], while offer a very stable standard video output.
5. Multi-point touch screen calibration algorithm inside makes this interface can be installed with almost every
screen, no matter original touch screen or added.
1. System structure:
camera
6Pin power
Navi RGB
Video
input
Analog
to
Digital
convert
er
64 Mega
bit
Dynamic
memory
Touch icon generation:
Video
output
Digital
to
Analog
conver
ter
RGB
CVBS
800X480
touch
IR output
CVBS
Note:
(1) Video is memorized into 64M SDRAM first, then read out and encoded back into video, to guarantee that
output is always fixed into one stable format, no matter what the input is although the input and output are
showing the same video picture.
The input can be: NTSC,PAL,SECAM, VGA,in RGB or CVBS format,the PAL/NTSC/SECAM inputs are
automatically detected and processed.
The output can be : PAL,NTSC,VGA,RGB in RGB or CVBS format. the PAL/NTSC,CVBS/RGB/VGA output are
selected by DIP switch.
(2) the Navi RGB and AV input signals from the input side are digitized into 800XRGBX48 0high definition signals
first, then recoded from the memory tank to generate RGB or AV signals again.
2.DIP switch settings
DIP When =ON side When =OFF side(Stay up side)
1 Navi-RGB input enabled Navi-RGB input disabled
2, AV1 input enabled AV1 input disabled
3 AV2 input enabled AV2 input disabled
4 The navi RGB=VGA resolution[800X600@60Hz] The navi RGB=NTSC resolution
5 If Reverse signal(Green wire=12V)happens, video
goes to CAM video
If Reverse signal(Green wire=12V)happens,
video goes to car original video
This function can be ignored by leave away
the green wire.
6 When DIP6=ON, this interface go to IR program
mode to record the new ir code. Refer to “Ir
programming” part for details.
When DIP6 goes to ON/off 6 times, this interface
go to touch calibration mode to get tuned to a new
touch panel. Refer to “touch calibration” part for
details.
Set to “OFF” for normal use.
7,8 Output format:
(off,off): output=NTSC composite video
(off,on): output =PAL composite video
(on,off): output =RGB-NTSC component video
(on,on): output =RGB-VGA
The LED below is for power indicator.
The LED up is for IR indicator, when there is IR output, the led blinks.
3.Wiring diagram
AV1/2
TV/DVD
CVBS
in
Original DVD/navi/Music
information displayed
6Pin
POWER
NAVI
RGB
IN DIP switches
UP row: output of
RGB+sync,
Down row:input of
Car RGB+sync
SOG [sync on
Green] output
IR out
CVBS output
6Pin POWER conn. For the Interface box :
YELLOW: 12V battery power, it can also be ACC.
RED=ACC:whenthis wire goes to 12V, the interface works.
BLACK:Ground for chassis。
GREEN: go to camera video when this wire=12V.
white: switch signal when >5V.[max 25V]
GRAY: specific control signal from the CAN box, do not connect to anything.
RGB output connector:
NOTE:the RGB,AV1,AV2,CAM video on the input side are converted by internal circuit, while the CAR RGB input
is not, the car RGB is only switched to the RGB output leads.
When DIP sets the output to:” (off,off): output=NTSC composite video” or ” (off,on): output =PAL composite
video” the RGB input/Output should not be used. When the user is switching the input[by set white wire to 12V or
touch the “SRC” icon on touch panel], the input channel will be switched like this” navi RGBAV1AV2navi
RGB…”, there is NO car RGB shown.
When DIP sets the output to:” output =RGB-NTSC component video” the RGB input/Output can be used and
CVBS output should not be used. When the user is switching the input[by set white wire to 12V or touch the “SRC”
icon on touch panel], the input channel will be switched like this” CAR RGB navi RGBAV1AV2 CAR
RGBnavi RGB…”, there is car RGB shown.
When DIP sets the output to:” output =RGB-NTSC component video” the RGB input/Output can used and CVBS
output should not be used. there is NO car RGB shown.
4.touch panel connector
AV1,AV audio input
Touch panel connector
RGBoutput signals:from left to right:
RED out,GREEN out,Blue out,Csync out,GND,left sound out,right
sound out,12V indicator.
CAR RGBinput signals:from left to right:
RED in, Green In, Blue In, CSync In, GND,
Hsync Out,Vsync Out,5V indicator.
Hsync Out,Vsync Out are the component part of Cysnc output,