Project: Drill Vice Page 1 of 14 Drill Vice
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Project: Drill Vice Page 11 of 14 Standard Part
Project from www.craftsmanspace.com
Project: Drill Vice
Assemblage Instructions
1. Screw the Clamp Screw (item 7) in the Support (item 2)
2. Fasten the Movable Jaw (item 4) to the subassembly made in the previous step with Grub Screw M5 (item 8).
Project: Drill Vice Page 13 of 14
3. Fasten the Leading Axle (item 5) to the subassembly made in the previous step with Screws M5x16mm (item 6).
4. Fasten the Jaw (item 3) to the subassembly made in the previous step with Screws M5x16mm (item 6).
Project from www.craftsmanspace.com
Project: Drill Vice Page 14 of 14 5. Fasten the Base (item 1) to the subassembly made in the previous step with Screws M5x16mm (item
6).
Project from www.craftsmanspace.com
Related Documents
