Three Piece Metal Seated Trunnion Ball Valves

SVI    Trunnion    Ball    Valves YOUR ONE-STOP VALVE SOURCING CHANNEL

Product Line Technical Data

*Note: Other material upon request The data provided in this document is subject to change without notice, Please contact SVI for current drawing when order.

Material List Part Name Carbon Steel Stainless LCC Part Name Carbon Steel Stainless LCC

1 BONNET ASTM A105 ASTM A182 F316 ASTM A350 LF2 17 UPPER STEM ASTM A705 630 ASTM A182 F316 ASTM A182 F316

2 O-RING VITON VITON VITON 18 BEARING METAL BACK PTFE METAL BACK PTFE METAL BACK PTFE

3 GASKET 304+GRAPHITE 316+GRAPHITE 316+GRAPHITE 19 WASHER PEEK PEEK PEEK4 O-RING VITON VITON VITON 20 COVER ASTM A105 ASTM A182 F316 ASTM A350 LF25 BODY ASTM A105 ASTM A182 F316 ASTM A350 LF2 21 O-RING VITON VITON VITON

6 GASKET 304+GRAPHITE 316+GRAPHITE 316+GRAPHITE 22 GASKET 304+GRAPHITE 316+GRAPHITE 316+GRAPHITE

7 O-RING VITON VITON VITON 23 BOLTS ASTM A 193 B7M ASTM A193 B8M ASTM A320 L7M

8 PLUG ASTM A105 ASTM A182 F316 ASTM A350 LF2 24 O-RING VITON VITON VITON

9 HEX BOLTS ASTM A 193 B7M ASTM A193 B8M ASTM A320 L7M 25 PACKING GRAPHITE GRAPHITE GRAPHITE

10 STEM ASTM A705 630 ASTM A182 F316 ASTM A182 F316 26 ADAPTOR PLATE ASTM A105 ASTM A182 F316 ASTM A350 LF2

11 BOLTS ASTM A 193 B7M ASTM A193 B8M ASTM A320 L7M 27 BOLT ASTM A 193 B7M ASTM A193 B8M ASTM A320 L7M

12 HEX NUTS ASTM A194 2HM ASTM A194 8M ASTM A194 7M 28 BOLT ASTM A 193 B7M ASTM A193 B8M ASTM A320 L7M

13 BEARING METAL BACK PTFE METAL BACK PTFE METAL BACK PTFE 29 HEX NUTS ASTM A194 2HM ASTM A194 8M ASTM A194 7M

14 SPRING INCONEL X-750 INCONEL X-750 INCONEL X-750 30 GEAR OPERATOR ASSEMBLED ASSEMBLED ASSEMBLED

15 SEAT ASTM A105N+STL.6 ASTM A182 F316+NI60

ASTM A350 LF2+NI60 31 KEY ASTM A705 630 ASTM A182 F316 ASTM A182 F316

16 BALL ASTM A105N ASTM A182 F316+NI55

ASTM A350 LF2+NI55 32 TAPER PIN 304 304 304

�1Rev: 151101

Three Piece Metal Seated Trunnion Ball Valves Pressure Class: 150 thru 1500 Size: 2” thru 36”

Design and Manufacturing Standards

Valve Design: ASME B16.34 / API 6D

Flange Dimensions: ASME B16.5

Face to Face Dimensions: ASME B16.10

Tested In Accordance with: API 598

DESIGN FEATURES

INDEPENDENT SEATSIndependent seats with preloaded coil springs ensure a bubble tight seal even at low pressures

DOUBLE SEALED BODY JOINTSAll body joints have a primary o-ring seal (900-2500# ASME use double o-ring seals) backed by a secondary ss/graphite gasket seal. This is supported by a tight tolerance metal to metal, overlapped, joint construction to ensure fire safe design.

ANTI BLOW OUT-STEMThe stem is made separately from the ball. The lower end of the stem is designed with an integral shoulder to be blowout-proof.

SVI    Trunnion    Ball    Valves YOUR ONE-STOP VALVE SOURCING CHANNEL

Product Line Technical Data

NOTE: The data provided in this document is subject to change without notice, Please contact SVI for current drawing when order.

CLASS 150SIZE DN L-RF L-RTJ H L1 WT (kg)

2 x 1/2 38 178 191 140 300 152 50 178 191 159 300 17

3x2 50 203 216 159 300 303 75 203 216 197 400 37

4x3 75 229 241 197 400 424 100 229 241 216 450 49

6x4 100 394 406 216 450 100

CLASS 300SIZE DN L-RF L-RTJ H L1 WT (kg)

2 x 1/2 38 216 232 146 300 202 50 216 232 163 300 22

3x2 50 283 298 163 300 403 75 283 298 196 500 45

4x3 75 305 321 196 500 604 100 305 321 216 600 70

6x4 100 403 419 216 600 150

CLASS 600SIZE DN L-RF L-RTJ H L1 WT (kg)

2 x 1/2 38 292 295 153 404 282 50 292 295 165 500 32

3x2 50 365 359 165 500 483 75 365 359 201 600 56

4x3 75 432 435 201 600 804 100 432 435 220 700 105

6x4 100 559 563 220 700 210

CLASS 900SIZE DN L-RF L-RTJ H L1 WT (kg)

2 x 1/2 38 368 371 160 540 402 50 368 371 170 600 48

3x2 50 381 384 170 600 553 75 381 384 208 600 55

4x3 75 432 435 201 600 83

CLASS 1500SIZE DN L-RF L-RTJ H L1 WT (kg)

2 x 1/2 38 368 371 166 500 452 50 368 371 170 600 63

3x2 50 470 473 170 600 1103 75 470 473 238 882 135

4x3 75 546 549 238 882 150

�2Rev: 151101

SVI    Trunnion    Ball    Valves YOUR ONE-STOP VALVE SOURCING CHANNEL

Product Line Technical Data

NOTE: The data provided in this document is subject to change without notice, Please contact SVI for current drawing when order.

�3Rev: 151101

CLASS 300SIZE DN L-RF L-RTJ H ΦA WT (kg)

6 151 403 419 264 460 1758x6 151 502 518 264 460 215

8 202 502 518 305 600 32710x8 202 568 584 305 600 382

10 252 568 584 360 600 40812x10 252 648 664 360 600 570

12 303 648 664 505 750 73514x12 303 762 778 505 750 980

14 334 762 778 458 750 116216x14 334 838 854 458 750 1250

16 385 838 854 514 750 149218x16 385 914 930 514 750 1620

18 436 914 930 538 750 175220x18 436 991 1010 538 750 1910

20 487 991 1010 592 750 269524x20 487 1143 1165 592 750 2860

24 589 1143 1165 670 750 321030x24 589 1397 1422 670 750 4560

30 735 1397 1422 891 750 559036x30 735 1727 1756 891 800 7854

36 874 1727 1756 - 800 10280

CLASS 150SIZE DN L-RF L-RTJ H ΦA WT (kg)

6 151 394 406 264 460 1548x6 151 457 470 264 460 240

8 202 457 470 305 600 27010x8 202 533 546 305 600 370

10 252 533 546 358 600 46212x10 252 610 - 358 600 535

12 303 610 622 386 600 64614x12 303 686 699 386 600 845

14 334 686 699 408 600 95816x14 334 762 775 408 600 1160

16 385 762 775 460 600 124818x16 385 864 876 460 600 1350

18 436 864 876 468 700 144020x18 436 914 927 468 700 1850

20 487 914 927 562 700 196024x20 487 1067 1080 562 700 2540

24 589 1067 1080 652 700 281030x24 589 1295 - 652 700 4550

30 735 1295 - 758 700 485036x30 735 1524 - 758 750 7980

36 874 1524 - 750 8950

SVI    Trunnion    Ball    Valves YOUR ONE-STOP VALVE SOURCING CHANNEL

Product Line Technical Data

NOTE: The data provided in this document is subject to change without notice, Please contact SVI for current drawing when order.

CLASS 600SIZE DN L-RF L-RTJ H ΦA WT (kg)

6 151 559 562 266 600 2608x6 151 660 664 266 600 382

8 202 660 664 337 600 46510x8 202 787 791 337 600 591

10 252 787 791 476 750 75012x10 252 838 841 440 750 856

12 303 838 841 440 750 109014x12 303 889 892 455 750 1150

14 334 889 892 455 750 133516x14 334 991 994 513 750 1560

16 385 991 994 513 750 181018x16 385 1092 1095 580 750 2300

18 436 1092 1095 580 750 250020x18 436 1194 1200 590 750 2750

20 487 1194 1200 695 750 300024x20 487 1397 1407 695 750 4150

24 589 1397 1407 - 762 500030x24 589 1651 1664 - 762 6100

30 735 1651 1664 - 762 757036x30 735 2083 2099 - 762 9266

36 874 2083 2099 - 762 1353

CLASS 900SIZE DN L-RF L-RTJ H ΦA WT (kg)

4 100 457 460 223 460 1256X4 100 610 613 223 460 270

6 151 610 613 281 600 3058x6 151 737 740 281 600 480

8 201 737 740 327 600 56010x8 201 838 841 327 600 750

10 252 838 841 386 600 86812x10 252 965 968 386 600 1050

12 303 965 968 438 700 134314x12 303 1029 1038 438 700 1520

14 322 1029 1038 465 750 161016x14 322 1130 1140 465 750 1850

16 373 1130 1140 560 750 252518x16 373 1219 1232 560 750 2690

18 423 1219 1232 615 750 287020x18 423 1321 1334 615 750 2950

20 471 1321 1334 - 762 348024x20 471 1549 1568 - 762 3600

24 570 1549 1568 - 762 703030x24 570 1880 1902 - 762 10200

30 712 1880 1902 - 762 12440

�4Rev: 151101

SVI    Trunnion    Ball    Valves YOUR ONE-STOP VALVE SOURCING CHANNEL

Product Line Technical Data

NOTE: Valves larger than 16” come standard with support feet - please call for dimensions. The data provided in this document is subject to change without notice, Please contact SVI for current drawing when order.

CLASS 1500SIZE DN L-RF L-RTJ H ΦA WT (kg)

4 100 546 549 258 600 1906X4 100 705 711 258 600 410

6 144 705 711 342 750 4618x6 144 832 841 342 750 560

8 192 832 841 492 750 64010x8 192 991 1000 492 750 930

10 239 991 1000 553 750 121012x10 239 1130 1146 553 750 1356

12 287 1130 1146 483 750 159214x12 287 1257 1276 483 750 1830

14 315 1257 1276 - - 226016x14 315 1384 1406 - - 2560

16 360 1384 1406 - - 376018x16 360 1537 1559 - - 5554

18 406 1537 1559 - - 640020x18 406 1664 1686 - - 7521

20 454 1664 1686 - - 806024x20 454 1944 1972 - - 10922

24 546 1944 1972 - - 14550

�5Rev: 151101

SVI    Trunnion    Ball    Valves YOUR ONE-STOP VALVE SOURCING CHANNEL

Common Standard reference

API - AMERICAN PETROLEUM INSTITUTE API 608 Metal ball valves - flanged, threaded and welding endsAPI 598 Valve inspection and testingAPI Q1 Specification for quality programsAPI 6D Specification for pipeline valvesAPI 607 Fire test for quarter turn valves with non-metallic seats

ASME - AMERICAN SOCIETY OF MECHANICAL ENGINEERS

B16.5 Pipe flanges and flanged fittings B16.10 Face to Face and end to end dimensions of valves B16.25 Butt welding ends B16.34 Valves - flanged, threaded and welding ends B16.47 Large diameter steel flanges

MSS - Manufactures Standardisation Society MSS SP - 25 marking system for valves, flanges, fittings and unions MSS SP - 44 Steel pipeline flanges MSS SP - 54 Quality standard for steel castings for valves, radiographic examination method MSS SP - 55 Quality standard for steel castings for valves, visual method

�6Rev: 151101

BS - BRITISH STANDARD BS EN ISO 10204 Metallic products inspection documents BS EN 17292 Metal ball valves for petroleum, petrochemical and allied industries

CSA - CANADIAN STANDARDS ASSOCIATION CSA B51 Boiler, pressure vessel and pressure piping code CSA Z245.15 Steel valves CSA Z662-11 Oil and gas pipeline systems

ISO - INTERNATIONAL ORGANIZATION FOR STANDARDIZATION

ISO 9001 Quality management systems ISO TS 29001 Specification for quality programs ISO 15156 (All) Sulphide stress cracking resistant metallic materials for oil field equipment

ISO 14313 Pipeline transportation system-

pipeline valves ISO 5208 Pressure testing of metallic valves ISO 10497 Fire type testing of valves ISO 5211 Attachment of part-turn actuators

NACE - NACE INTERNATIONAL, THE CORROSION SOCIETY

MR0175 Sulphide stress cracking resistant metallic materials for oilfield equipment MR0103 Sulphide stress cracking resistant metallic materials for petroleum refining