The model of the procedural simulator for the UAV’s operators training (Модель процедурного тренажеру для підготовки операторів

The model of the procedural simulator for the UAV’s operators training

(Модель процедурного тренажеру для підготовки операторів безпілотних літальних апаратів)

MINISTRY OF EDUCATION AND SCIENCE OF UKRAINENATIONAL AVIATION UNIVERSITY

Institute of Air NavigationAir Navigation Systems Department

MASTER`S DEGREE THESIS

Completed by:

I.Lutsyk

Supervisor:

O.Luppo

PurposeThe development of the procedural simulator for the

UAV’s operators training (Flight Plan Programming)

TasksTo analyse the general principles of the unmanned

aircraft systems;To process information about the existing methods of

operators training and methods of flight simulation;To choose an appropriate mathematical model for the

flight programming;To develop a navigational model and the algorithm of

the simulator;To implement the developed models and algorithms

to create procedural simulator 2

3

Navigational scope

4

Motion of the UAV at turn:y

x

S

z

S1

z1

fi1

Xi

YiYi-1

Xi-1

where R - the radius of turn, ω - the angular velocity, g - gravitational acceleration, γ - bank angle, φr - the depth of turn, φ1 - the course at the beginning of turn, φ2 - given course for turn, z1 - coordinate along the axis z, S1 - coordinates along the axis S, t - the time since the beginning of the reversal

5

Motion of the UAV in vertical plane:

Vertical Speed and Indicated Air Speed permissible zone

6

Start

HeadingHeading desired

Airspeed

Linear movement?

No

Calculate turn radius;Calculate angle α;Calculate position change;Calculate new X, Y by turn movement formula;Calculate drift for coord. X;Calculate drift for coord. Y;Calculate X, Y with drift;Calculate new heading value;

Calculate coordinate X, Y coordinates value using linear motion equation;Calculate drift for coord. X;Calculate drift for coord. Y;Calculate X, Y with drift;

Yes

Calculate Ground Speed;Calculate Drift angle;

Current headingGround speedDrift angleCoordinates X, Y

End

Algorithm of the coordinates

calculation

7

UAV Simulation block diagram

Human operator

Computer Control panel

Block of flight parameters calculation

8

№ of the block

NameInput data Output data

Main operations

1Block of parameters

calculation in the horizontal plane

1) true air speed

2) current heading

3) desired heading

4) bank angle

5) previous coordinates

1) heading

2) coordinates

Receiving the input data, the calculation of coordinates, of course is carrying out in this block is. Input is the result of other calculations blocks. Output can be used for calculations in other units

2Block of parameters

calculation in the vertical plane

1) engine thrust

2) aircraft parameters

3) minimum engine thrust

4) current indicated airspeed

5) pitch angle

6) previous altitude

1) Indicated air speed

2) true air speed

3) vertical speed

4) altitude

5) minimum required engine thrust

Receiving the input data, this block calculates the change of of all velocities, required thrust. These initial data used in other units

UAV Simulation software units

9

Main start window

10

Flight Plan creation window

11

After launch window

Bottom camera manipulation

12

Landing of the UAV

13

14

Conclusions

As a result of the work the model of the procedural simulator for the UAV’s operators training was created. Simulation method used for programming was previously presented at scientific conferences. For further improvement and promotions of practical usage of the developed trainer model the list of recommendations is created.

Recommendations

The simulator may be used in the educational process to study the basic principles of the UAV flight

Developed model of the UAV simulator can be used for future flight simulation projects

15

Approbation of the results1. Proposed UAV simulation method firstly was

represented at the All-Ukrainian competition of student research papers "Aviation and rocket-space equipment. Air Navigation" (02.04.2015).

2. Also there was the participation in XII International Scientific Conference "AVIA 2015" (28.04.2015)

16

Thank you for your attention!!!

17