Page 1
Queensland and Northern Australia Moorings
The Great Barrier Reef Moorings include Lizard Island Slope and Lizard Island Shelf moorings
in the north, Myrmidon Reef, Palm Passage and Elusive Reef in the central Great Barrier Reef
and in the southern Great Barrier Reef there is Capricorn Channel, Heron North, Heron South,
One Tree East. Note that Lizard Island Slope and Shelf moorings, Elusive Reef and Heron North
moorings have been discontinued.
The Yongala NRS mooring is one of IMOS near-real time moorings and its latest configuration
consist of a surface component and a sub-surface component that include:
Surface component:
- Vaisala sensor to measure wind, precipitation, barometric pressure, temperature, relative
humidity
- Seabird CTD to measure temperature, conductivity, depth, chlorophyll fluorescence, turbidity,
oxygen, light transmission and photosynthetically active radiation.
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
Subsurface component:
- Seabird sensors to measure temperature, conductivity, depth, fluorescence, turbidity and
photosynthetically active radiation.
- RDI 600 kHz ADCP to measure currents.
Technical summary
Instrumentation Great Barrier Reef moorings
Page 2
Queensland and Northern Australia Moorings
Technical summary
Instrumentation
Schematic of the Yongala mooring surface and subsurface components.
Great Barrier Reef moorings
Page 3
Queensland and Northern Australia Moorings
Technical summary
InstrumentationGreat Barrier Reef moorings
The Myrmidon Reef mooring latest configuration includes:
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 75kHz ADCP to measure currents.
The Palm Passage mooring is one of IMOS near-real time moorings and its latest configuration
consist of:
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Seabird CTD with FLNTU sensor measuring temperature, conductivity, depth, fluorescence
and turbidity.
- Seabird temperature and depth recorder.
- RDI 300 kHz ADCP to measure currents.
Page 4
Queensland and Northern Australia Moorings
Technical summary
Instrumentation
Schematic of moorings from central and northern GBR region
Great Barrier Reef moorings
Page 5
Queensland and Northern Australia Moorings
Technical summary
InstrumentationGreat Barrier Reef moorings
The Capricorn Channel mooring latest configuration consist of:
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 300 kHz ADCP to measure currents.
The One tree east mooring latest configuration consist of:
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Seabird CTD with FLrt, PAR, O2, and TRANS sensors to measure temperature, conductivity,
depth, chlorophyll fluorescence, turbidity, oxygen, light transmission and photosynthetically
active radiation.
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 300 kHz ADCP to measure currents.
- Nortek 1 MHzADCP.
The Heron South mooring latest configuration consist of:
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Seabird temperature and depth recorders.
- RDI 600 kHz ADCP to measure currents.
Page 6
Queensland and Northern Australia Moorings
Technical summary
Instrumentation
Schematic of moorings from southern GBR region
Great Barrier Reef moorings
Page 7
Queensland and Northern Australia Moorings
Technical summary
InstrumentationIndonesian Throughflow Shelf Moorings
he Indonesian Throughflow (ITF) shelf moorings include a set of four moorings along the
self: Timor Slope, Margaret Harries Bank, Flat Top Banks and Joseph Bonaparte Gulf. They
compliment the Deep Water Moorings Indonesian Throughflow moorings.
The Timor South mooring latest configuration consist of:
- Several Seabird CTDs to measure temperature, conductivity, depth and one Sebird CTD with
sensors to measure fluorescence, turbidity, oxygen, light transmission and photosynthetically
active radiation.
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 75 kHz ADCP to measure currents.
The Margaret Harries Bank mooring latest configuration consist of:
- Several Seabird CTDs to measure temperature, conductivity, depth
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 150 kHz ADCP to measure currents.
Page 8
Queensland and Northern Australia Moorings
Technical summary
InstrumentationIndonesian Throughflow Shelf Moorings
The Joseph Bonaparte Gulf mooring latest configuration consist of:
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Seabird CTDs to measure temperature, conductivity, depth, fluorescence, turbidity, oxygen,
light transmission and photosynthetically active radiation.
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 300 kHz ADCP to measure currents.
The Flat Top Banks mooring latest configuration consist of:
- Seabird CTDs to measure temperature, conductivity, depth
- Seabird temperature and depth recorders.
- Wildlife computer satellite trackers.
- RDI 150 kHz ADCP to measure currents.
Page 9
Queensland and Northern Australia Moorings
Technical summary
InstrumentationIndonesian Throughflow Shelf Moorings
Schematic of Indonesian Throughflow shelf moorings
Page 10
Queensland and Northern Australia Moorings
Technical summary
InstrumentationDarwin Port
Moorings at this site include the Darwin NRS mooring and a second mooring in the Beagle
Gulf recently added (May 2015) to expand our understanding of the factors influencing coastal
systems and serve as an early warning system.
The Darwin NRS mooring is one of IMOS near-real time moorings and its latest configuration
consist of:
Surface component
- Vaisala sensor to measure wind, precipitation, barometric pressure, temperature, relative
humidity.
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
Subsurface component
- Seabird CTD to measure temperature, conductivity, depth, fluorescence, turbidity, oxygen,
light transmission and photosynthetically active radiation.
- RDI 600 kHz ADCP to measure currents.
Page 11
Queensland and Northern Australia Moorings
Technical summary
InstrumentationDarwin Port
The second Beagle Gulf mooring configuration consists of:
Surface component
- Vaisala sensor to measure wind, precipitation, barometric pressure, temperature, relative
humidity.
- WQMs with FLNTU sensors measuring fluorescence and turbidity, CTD sensors measuring
conductivity temperature and depth and DO sensors measuring dissolve oxygen.
- Wildlife Computers satellite tracking.
Subsurface component
- Seabird CTD to measure temperature, conductivity, depth, fluorescence, turbidity, oxygen,
light transmission and photosynthetically active radiation.
- RDI 600 kHz ADCP to measure currents.
Page 12
Queensland and Northern Australia Moorings
Technical summary
InstrumentationDarwin Port
Schematic of the Darwin NRS mooring
Page 13
Queensland and Northern Australia Moorings
Technical summary
InstrumentationNorthwest Western Australia
In May 2011 the West Australian state government funded the deployment of the Kimberley
and Pilbara arrays in January and February 2012. The four moorings of the Kimberly array were
deployed at 50, 100, 200 and 400m isobars on the continental shelf. The three Pilbara mooring
were also deployed on the continental shelf at 50, 100 and 200 isobars. In August 2014 due to
the cessation in WA Government funding the Kimberly and Pilbara arrays were removed.
Page 14
Queensland and Northern Australia Moorings
Technical summary
DeploymentsGreat Barrier Reef Moorings
Some of the first moorings to be deployed in the National Mooring Network were four mooring
pairs and an additional mooring north of Heron Island in Great Barrier Reef. These nine moorings
were deployed over two research cruises between September 2007 and June 2008. The
moorings include in the northern Great Barrier Reef the Lizard Island Slope and Shelf moorings,
in the central Great Barrier Reef the Myrmidon Reef, Elusive Reef, and Palm Passage, and in
the southern Great Barrier Reef the Capricorn Channel, Heron North, Heron South and One
Tree East. Initially all current meters were deployed but there were some delays in instrument
availability resulting in the Great Barrier Reef moorings not having their full suite of instruments
on first deployment. This was rectified in 2009 with all moorings complete and data being
downloaded during six monthly servicing. The moorings were consolidated to four pairs of
moorings in 2009/10.
Once the four pairs of Great Barrier Reef arrays were in place there were some alterations and
notable events over the following years. In 2009 Tropical Cyclone Yasi traversed the Coral Sea
and passed just to the north of the Central Great Barrier Reef mooring array. The subsurface
moorings temporarily suffered knockdown as the eye passed by however recovered and
continued to produce good data in its wake. In February 2013, the Palm Passage mooring was
upgraded to real time and the Heron Island North mooring was removed. The Palm Passage
together with the Yongala NRS moorings provide data to eReefs’ whole of Great Barrier Reef
hydrodynamic model to improve the near real time modelling results. In 2014 a consolidation of
moorings in the Great Barrier Reef was undertaken with the removal of Lizard Island Shelf and
the Lizard Island Slope moorings in May 2014 and Elusive Reef Passage mooring in October
2014.
Page 15
Queensland and Northern Australia Moorings
Technical summary
DeploymentsGreat Barrier Reef Moorings
Moorings off the coast of Queensland
Page 16
Queensland and Northern Australia Moorings
Technical summary
DeploymentsIndonesian Throughflow Shelf Moorings
The Indonesian Throughflow (ITF) shelf moorings were deployed late June 2010. The set of four
moorings include Timor Slope, Margaret Harries Bank, Flat Top Banks and Joseph Bonaparte
Gulf. These shelf moorings compliment the Deep Water Moorings Indonesian Throughflow
moorings that were deployed in June 2011 completing the full array.
Shelf moorings of the Indonesian Throughflow
Indonesian Throughflow Shelf MooringsIn May 2011 the West Australian state government funded the deployment of the Kimberley
and Pilbara arrays in January and February 2012. The four moorings of the Kimberly array were
deployed at 50, 100, 200 and 400m isobars on the continental shelf. The three Pilbara mooring
were also deployed on the continental shelf at 50, 100 and 200 isobars. In August 2014 due to
the cessation in WA Government funding the Kimberly and Pilbara arrays were removed. Two of
the moorings were redeployed by the Australian Institute of Marine Science in Camden Sound
in the Kimberly region at 50 and 100 isobars (CAM050 and CAM100).
Page 17
Queensland and Northern Australia Moorings
Technical summary
DeploymentsDarwin Ports Moorings
Darwin Port Corporation has co-invested in a real time mooring in Beagle Gulf that will inform
the modelling of Darwin Harbour in tandem with the Darwin NRS. The second mooring was
initially deployed in Darwin Harbour but it was relocated in June 2013 to a longer term site
in Beagle Gulf. The delayed mode mooring has been operating since 2012 however it was
upgraded to real-time in September 2014. A second mooring in the Beagle Gulf was also added
in May 2015 to expand our understanding of the factors influencing coastal systems and serve
as an early warning system.
Location of Beagle Gulf and Darwin Moorings