kortho C A B A4+ L a b e l p r i n t e r s Technical specifications 1.2 Label printer A4 + Print head Printing method thermal transfer thermal direct – Printable resolution dpi 203 300 600 Print speed up to mm/s 250 250 100 Print width up to mm 104 105.6 105.6 Material Paper, cardboard, textile, plastics Labels or continuous materials on rolls or fanfold Labels on reel – Material thickness mm/weight g/m 2 0.05-0.8/60-300 Width labels 1) mm 20-116 liner mm 24-120 continuous material mm 24-120 contin. heat shrink tube mm 25-85 Label without back-feed from mm 4 height 1) when dispensing from mm 12 up to mm 5,000 4,000 1,000 Media roll outer diam. up to mm 205 core diameter mm 38-100 winding Outer or inner Ribbon Ink side Outer or inner Roll diameter up to mm 80 Core diameter mm 25 Variable length up to m 500 Width 2) up to mm 114 Internal rewinder (only with peel-off devices) Outer diameter up to mm 142 Core diameter mm 38.1 Label winding Outer only Dimensions and weights Height mm 274 Depth mm 446 Width mm 242 Weight kg 9 Label sensor Gap sensor For leading edge or punch marks and end of material p o t . t p o / m o t t o b m o r f r o s n e s e v i t c e l f e R For print marks Distance to locating edge mm 5-53 center to the left mm – Electronics Processor 32 bit clock rate MHz 266 Main storage (RAM) MB 64 IFFS printer memory MB Flash 8 Plug-in CompactFlash Type I WLAN card Battery buffer for real-time clock Acoustic error signal Interfaces Centronics according to IEEE 1284 RS232 C USB 2.0 hi-speed slave for PC Ethernet 10/100 Base T, LPD-, RawIP-, FTP-Printing, DHCP, HTTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP RS422/RS485 Peripheral connection WLAN 802.11b/g, WEP/WPA-PSK (TKIP) 2xUSB hosts for external operation panel, k c i t s B S U , y e k e c i v r e s , r e n n a c s , d r a o b y e k Operating data Power supply 100-240 VAC ~ 50/60 Hz, PFC Power consumption W 100-300 depending on type of printer Temperature/humidity operation 5-40 °C/10-85 % not condensing storage 0-60 °C/20-80 % not condensing transport –25-60 °C/20-80 % not condensing Approvals CE, FCC class A, CB, CCC, UL Standard Optionally 1) Limitations may apply to small labels, thin materials or strong adhesives. These applications need to be tested and approved. 2) Ribbon according to label width in order to avoid folding. 1 2 3 4 5 6 7 8 Common details Pictured: Label printer A4 + with dispensing function Wide graphic display White backlight for optimum readability. Ribbon holder Three-part tightening axles enable a quick and easy exchange of ribbons. Simple adjustment The print head is pressed down by two toggles. One is mounted to the left label margin, the other is pushed to the right label margin. Peripheral connection All add-on modules are easy to connect. All peripheral devices are plugged in the printer using two pins and are fixed in place with a screw. Solid metal housing Die-cast aluminum. All components are mounted on it. 1 2 3 4 5 6 7 8 Roll holder Available for core diameters starting 38 mm (76 mm adapters for improved label winding are provided). The spring-mounted margin stop ensures constant tension during feeding, thus ensuring high printing accuracy. Internal rewinder The rewinder with a three-part tightening axle ensures easy rewinding and removing of labels or liners with or without paper core. Peel-off function The label is removed from its liner via peel-off plate. High printing and dispensing accuracy can be achieved via powered rewind assist and pinch rollers.