RICKERT GmbH & Co. KG - Robert-Bosch-Str. 21 - 46397 Bocholt Telefon: +49 (0) 28 71 / 25 08 - 0 - Fax: +49 (0) 28 71 / 25 08 - 22 - E-Mail: [email protected] - Web: www.rickert-bocholt.de Technical Data Sheet Material description: Highly pigmented, 2-component epoxy-based primer, rich in zinc dust, with excellent anticorrosive protection and very good temperature resistance on blasted steel surfaces. After hardening, RICKERT EP Zinc Dust Primer 2058 is resistant to mechanical stress, both waterproof and weatherproof, and resistant to most solvents. Designated use: High-quality, versatile primer for blasted steel surfaces requiring heavy-duty anticorrosive protection. RICKERT EP Zinc Dust Primer 2058 is both suitable as a stand-alone coating and universally overcoatable with 2-component PU, 2-component EP, SR and PVC coatings. It may be continuously exposed to temperatures of up to 300° C. Binder system: Epoxy resin, polyamide amino cross-linked Pigment system: Micronised zinc dust Solid content: Approx. 85 wt. % in the finished mixture Flash point: Approx. 24° C (mixture) Density: Approx. 2.9 g / cm 3 in the mixture Temperature resistance: Dry heat up to 300° C (constant stress) Pot life: The prepared mixture can be applied for approx. 8 hrs under normal conditions. Labelling and safety advice: See safety data sheet Can size: 23 kg RICKERT EP Zinc Dust Primer 2058 2 kg RICKERT EP Hardener 2058 5,75 kg RICKERT EP Zinc Dust Primer 2058 0,5 kg RICKERT EP Hardener 2058 Degree of gloss: Matt Shades: Grey Coverage: Approx. 5.6 m 2 / kg finished mixture with a resulting dry film thickness of around 40 µm. Viscosity supplied: Approx. 30 s DIN 4 mm Storage: Store in a cool and dry, yet frost-free, place Mixing ratio: 100 parts by weight EP Zinc Dust Primer 2058 8.5 parts by weight EP Hardener 2058 Thinning and cleaning agent: RICKERT EP Thinner 0050 Surface preparation: The surface must be properly prepared as well as being free from oil, grease and dirt. Mill scale, rust and old coatings should be removed completely by mechanical or chemical means. A result comparable to the standard grade of cleanliness SA 2 ½ (DIN 55928) should be aimed for. Application: Combine both components in the correct mixing ratio and mix thoroughly. a) Brush or roller: Apply coating undiluted as far as possible. b) High-pressure spraying: Dilute coating with EP Thinner 0050 to approx. 20 s / DIN 4 mm and apply with a 1.8-mm nozzle at 3.5 - 4 bar pressure. c) Airless / Airmix method: Apply coating undiluted or apply slightly diluted with EP Thinner 0050. The pressure should be approx. 120 bar and a 0.013" nozzle should be used. Application conditions: Object and ambient temperature should be at least 15° C. The relative humidity should not exceed 80%. The optimum application temperature is between 20° and 30° C. EP Zinc Dust Primer 2058
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RICKERT GmbH & Co. KG - Robert-Bosch-Str. 21 - 46397 Bocholt Telefon: +49 (0) 28 71 / 25 08 - 0 - Fax: +49 (0) 28 71 / 25 08 - 22 - E-Mail: [email protected] - Web: www.rickert-bocholt.de
Technical Data Sheet Material description: Highly pigmented, 2-component epoxy-based primer, rich in zinc dust, with excellent anticorrosive protection and very good temperature resistance on blasted steel surfaces. After hardening, RICKERT EP Zinc Dust Primer 2058 is resistant to mechanical stress, both waterproof and weatherproof, and resistant to most solvents. Designated use: High-quality, versatile primer for blasted steel surfaces requiring heavy-duty anticorrosive protection. RICKERT EP Zinc Dust Primer 2058 is both suitable as a stand-alone coating and universally overcoatable with 2-component PU, 2-component EP, SR and PVC coatings. It may be continuously exposed to temperatures of up to 300° C. Binder system: Epoxy resin, polyamide amino cross-linked Pigment system: Micronised zinc dust Solid content: Approx. 85 wt. % in the finished mixture Flash point: Approx. 24° C (mixture) Density: Approx. 2.9 g / cm3 in the mixture Temperature resistance: Dry heat up to 300° C (constant stress) Pot life: The prepared mixture can be applied for approx. 8 hrs under normal conditions. Labelling and safety advice: See safety data sheet
Can size: 23 kg RICKERT EP Zinc Dust Primer 2058 2 kg RICKERT EP Hardener 2058 5,75 kg RICKERT EP Zinc Dust Primer 2058 0,5 kg RICKERT EP Hardener 2058 Degree of gloss: Matt Shades: Grey Coverage: Approx. 5.6 m2 / kg finished mixture with a resulting dry film thickness of around 40 µm. Viscosity supplied: Approx. 30 s DIN 4 mm Storage: Store in a cool and dry, yet frost-free, place Mixing ratio: 100 parts by weight EP Zinc Dust Primer 2058 8.5 parts by weight EP Hardener 2058 Thinning and cleaning agent: RICKERT EP Thinner 0050 Surface preparation: The surface must be properly prepared as well as being free from oil, grease and dirt. Mill scale, rust and old coatings should be removed completely by mechanical or chemical means. A result comparable to the standard grade of cleanliness SA 2 ½ (DIN 55928) should be aimed for. Application: Combine both components in the correct mixing ratio and mix thoroughly. a) Brush or roller: Apply coating undiluted as far as possible. b) High-pressure spraying: Dilute coating with EP Thinner 0050 to approx. 20 s / DIN 4 mm and apply with a 1.8-mm nozzle at 3.5 - 4 bar pressure. c) Airless / Airmix method: Apply coating undiluted or apply slightly diluted with EP Thinner 0050. The pressure should be approx. 120 bar and a 0.013" nozzle should be used. Application conditions: Object and ambient temperature should be at least 15° C. The relative humidity should not exceed 80%. The optimum application temperature is between 20° and 30° C.
EP Zinc Dust Pr imer 2058
RICKERT GmbH & Co. KG - Robert-Bosch-Str. 21 - 46397 Bocholt Telefon: +49 (0) 28 71 / 25 08 - 0 - Fax: +49 (0) 28 71 / 25 08 - 22 - E-Mail: [email protected] - Web: www.rickert-bocholt.de
Technical Data Sheet Drying: Approximate values, determined at 20° C and approx. 40 µm dry coat; deviating values lead to changed drying properties: dust-dry: approx. 45 min. tack-free: approx. 2 hrs overcoatable: after overnight air drying At lower temperatures, a longer drying time should be allowed for. Forced drying: Approximate values, determined at 60° C object temperature approx. and approx. 40 µm dry coat; deviating values lead to changed drying properties: tack-free: approx. 60 min. overcoatable: after cooling Cleaning the equipment: Clean with RICKERT EP Thinner 0050 immediately after use. The purpose of this data sheet is to advise you. While all details conform to the latest state of the art, we can accept no liability for the results obtained during use, due to the variety of applications and the different substrates involved. The publication of this data sheet invalidates all previous data sheets for this product. Status: January 2018
Related Documents
