Product Catalog INSPECTION • CONSTRUCTION • REPAIR • MAINTENANCE Swing-Lo Suspended Scaffold Company PO Box 128 Covert Michigan 49043 Designers, Engineers & Manufacturers of Special Overhead Scaffolding Customer Service (866) 764-8989 Office (269) 764-8989 FAX (269) 764-8897 www.swing-lo.com E-mail: [email protected]THE SCAFFOLDING SYSTEM THAT BEGINS RIGHT AT THE TOP * BRIDGES * POWER PLANTS * RAILROADS * REFINERIES * AUDITORIUMS * CUSTOM DESIGN SINCE 1955 All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations. ● ● ● ● ● ● VER21JA MEMBER SCAFFOLDING DEVICES CLASSIFIED BY UNDERWRITERS LABORATORIES INC. ONLY AS TO LOAD CAPACITY NO. 419M
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ProductCatalog
INSPECTION • CONSTRUCTION • REPAIR • MAINTENANCE Swing-Lo Suspended Scaffold Company PO Box 128 Covert Michigan 49043
Designers, Engineers & Manufacturers of Special Overhead ScaffoldingCustomer Service (866) 764-8989 Office (269) 764-8989 FAX (269) 764-8897
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
●●
●●●●
VER21JAMEMBER
SCAFFOLDING DEVICES CLASSIFIED BYUNDERWRITERS LABORATORIES INC.
ONLY AS TO LOAD CAPACITY NO. 419M
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instrutions, and all Local, State, and Federal Safety Regulations.
FALL PROTECTION Static Line Fall Protection System 57 Fall Protection I-Beam Clamps 57 Prestressed Concrete I-Beam Clamp 57 Concrete Parapet Fall Protection Clamp 57
Rolling Parapet Guardrail System 58 Mobile Train Rail Guardrail System 58
GUARDRAIL SYSTEMS
Perimeter Guardrail System 59 Static Line Guardrail System 59
CLAMPS Mobile I-Beam Clamps 60 Mobile Angle Clamps 60 Stationary I-Beam Clamps 61 Screw Type I-Beam Clamps 61 Scissor I-Beam Clamps 62 Sweet Heart Beam Clamps 62 Heavy Duty Stationary I-Beam Clamps 62 Stationary Angle Clamps 62
Vertical Stems 63 Aluminum Support Beams 63 Steel Support Trusses 63 Hangers 64 Connectors & Accessories 65 Wheels 65
Code of Safe Practices 69 Daily Inspection Checklist 70 Index 71
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
→
→
The invention and introduction of Swing-Lo Suspended Scaffolds stemmed from the old adage, “necessity is the mother of invention”. That was the motivation behind the invention of Swing-Lo Suspended Scaffolds by H. George Leonard, a painting contractor whose bid was below his competitors. The idea was derived from the old ice tong and a pair of scissors. The combination of both items provided him with a model that would scissor and grip the bottom flanges of I-beams on bridges. This model, along with a connecting hanger component produced a simple suspended scaffold that could be easily erected and dismantled. The application and performance of this scaffold was well received, and soon became a demand by bridge and painting contractors. Thus, the painter became the manufacturer of a particular type of scaffold whose market has expanded from local to national to international.
Constant improvements in the design and fabrication of Swing-Lo Suspended Scaffolds have served to provide a safer, more efficient and economical scaffolding system for highway and utility contractors when access to work areas are a problem. Swing-Lo Suspended Scaffolds are patented with built-in, quick locking devices and fasteners for instant assembly. They have lessened the risks to the worker, lowered the cost, and increased safety in modern bridge and power plant construction and maintenance.
Today, Swing-Lo is a recognized designer and manufacturer of Suspended Scaffolding. We use the latest Computer-Aided (CAD) software to provide safe, quality solutions within budget and on-time delivery. Used by contractors and DOTs throughout the world, all Swing-Lo Systems meet or exceed OSHA safety standards and are fully supported by our technical consultants. Need suspended scaffolding NOW? Contact us and we will analyze your site to determine the most efficient design, then ship your scaffolding in as little as 5 to 10 working days.
Whether you’re working on new bridge or plant construction, planned outages, or ongoing maintenance, demand suspended scaffolding that comes in any size, suspends from any structure, and reaches any place.
We can help configure your suspended scaffold ranging from a 1000 lb safe working load (SWL) assembly to a 12000 lb or more safe working load assembly. We provide seminars covering the safe use of Swing-Lo Suspended Scaffolding. Upon request, we will come to your facility and provide a Competent Person Workshop.
With Swing-Lo Suspended Scaffold patented modular designs, scaffolding is easy to erect and totally versatile. Suspending is easy:
1. START AT THE TOP Swing-Lo Clamps or Scissors clamp on structural members (steel or concrete). Many products are available depending on your requirements.
2. ADD HANGER ASSEMBLY A working deck of almost any size can easily be suspended at any eight by adding to Clamps the Connectors Stems, and Hangers or Truss. A complete assembly will safely support a 1000 lb to 12000 lb distributed working load,
3. ADD DECKING, GUARDRAILS, AND TOE BOARDS
→→
1. CLAMP PAGES 59-61
→
2. CONNECTOR PAGE 62
3. RAIL BRKT PAGE 65
4. VERTICAL STEM PAGE 62
5. TRUSS (PAGE 62) HANGER (PAGE 63)
6. GUARDRAILS (PAGE 65) DECKING (PAGE 66)
OUR HERITAGE
1000 LB SWL ASSEMBLY
4
WE CAN HELP
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Tight spots are no problem for Swing-Lo suspended scaffolding. More than a dozen clamp designs let you connect to channels, bar joists, I-beams, angles - even vertical columns - with equal ease, so you can get your skilled trades into those hard-to-reach places. And with multi-level platforms, several crews can work in the same area at one time.
Hundreds of modular configurations give you overhead access to areas from 4’ x 8’ to an entire football stadium. Rigid stems, trusses and platforms provide solid footing, less fatigue and greater worker safety. And that means more productivity per man hour.
● Put your crew to work on both sides and under neath the bridge simultaneously.
● Swing-Lo suspended systems permit inspections and repairs that don’t block activity above or below the bridge.
● Give your crew complete access to every inch of every bridge safely and economically.
● No tools needed to erect the systems. In fact, most systems can be assembled and erected in minutes. ● Systems can be installed permanently for periodic inspections and maintenance or disassembled and easily installed at another site.
Mobile By-pass Scaffold & Connecting Mobile Parapet ScaffoldPages 21-23, 39-47
Put your crew in a tight spot.
APPLICATIONS
Open Deck Railroad Bridge Scaffold Page 52
Mobile By-pass Scaffold & Connecting Mobile Parapet ScaffoldPages 21-23, 39-47
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile By-pass Scaffold with Inverted Mobile Beam Clamps - Call
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile Parapet Scaffold with Ladder ClampPages 39-47, 56
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile I-Beam Clamp & Hanger with Aluminum Beam Support Multi-Level Suspended Scaffold, Page 24
Stationary Box Chord & Hanger with Aluminum Beam Support Suspended Scaffold - Call
Stationary Box Chord & Hanger with Aluminum Beam Support Suspended Scaffold - Call(Interior View)
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Inspect and maintain all areas of a Rig
Temporary or permanent suspended scaffold decks can be erected with attention given to a type of scaffold system best suited for a particular area. We will custom design and fabricate to meet a specific scaffold need
Swing-Lo Cable Scaffold is most effective where structural beams are not available for supporting a scaffold working deck. Cable trollies are anchored on both ends to support a rolling working deck. All Cable Scaffolds are equipped with brakes to maintain work-ing position.
Swing-Lo standard Beam Clamps (rolling or station-ary) attach and lock to structural beams to support a 1000lb. or more rated working deck. The By-Pass scaffold system enables the working deck to be moved around obstructions.
Swing-Lo Pier Column Scaffold is erected around pier columns to create a multi-level scaffold for reaching all areas of the pier column.Access to all scaffold decks is accomplished with a Swing-Lo Ladder Clamp and ladder.
Swing-Lo Scaffolds meet or exceed OSHA stan-dards.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Package includes:
2 each HD-801 Hangers (29” Base, 38” high)4 each Scissor Beam Clamps
Package includes:
2 each CHD-140 Hangers (31” Base, 36” high)4 each Scissor Beam Clamps
CHD-140 PAINTERS SPECIAL
HD-801 HANGER ASSEMBLY
CHD-140 Painters Special is designed for painters of highway bridges and overpasses.
*SHD and CSHD models use 2 3/8” diameter rollers (see page 65)
16
31”
29”
24”to
36”
38”
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Package includes:2 each CHD-101 Hangers (29” Base, 36” high)4 each SL-71A32 32” Vertical Stem2 each W-20D Drum Winch with 5/16 X 100’ wire rope2 each SL-54C 1000 lb SWL Beam Clamps 8 each SL-35D Safety Rail Bracket (Bolt-Type)4 each SL-65A Scissor Insert Connector4 each Scissor Beam Clamps (choose model from above)
The CHD-101 Winch Frame Hanger System may be used at the piers with or without rolling on the beams. This system has a built in winch so that assembled scaffold can be raised to the desired working height. It is also ideal for working on the pier columns.
The CHD-101 Winch Frame Hanger Assembly is used at the piers while working on the Pier Columns.
WINCH FRAME HANGER SCAFFOLD
1000 LB SWL MOBILE APPLICATION
1000 LB SWL STATIONARY APPLICATION
CHD-101 WINCH FRAME HANGER SYSTEM
BEAM CLAMP EXPANSION
CBHD #666-10
CMHD #668-16
CKHD #66
10-18
CSHD #66*
14-24”
W-20D Drum Winch 5/16 x 100’ wire rope
WINCH FRAME HANGER SCAFFOLD
17
29”
24”
32” stemfor
adjust-ment
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Mobile Beam Clamp & Truss Beam ExpansionSafe Working Load (SWL) lbPackage includes:
SL-54F5”- 18”1000
SL-54F2 6” - 18”
2000
4 ea Beam Clamps 4 ea Safety Hooks 4 ea Vertical Perforated Stems 2 ea 4 Ft. Horizontal Truss4 ea Stage Board Locks
SL-54FSL-65C
SL-71A72SL-70BSL-70L
SL-54F2SL-65CHDSL-71AA72
SL-70BSL-70L
PACKAGED WEIGHT (LBS) 218 262
Easy movement, no tools required for erection; add to that the expand-ability of the platform. Go to the appropriate page for quantity and length of Aluminum Stage. Go to pages 63-64 for width of deck re-quired. Adjust your working elevation along the Vertical Stem. Change the I-Beam Clamp for any other suitable model (see page 60).
Page 67 for Aluminum StagePage 66 for Guardrails, Posts, & LocksPage 56, 59 for fall protection I-Beam Clamps
I-BEAM ROLLER CLAMP, STEM AND HANGER (SLP-702A) USING 4” X 6” WOOD BASE CONFIGURATION
MOBILE BEAM CLAMP & HANGER
18
Mobile I-Beam Clamp & Hanger Beam ExpansionSafe Working Load (SWL) lbPackage includes: 8’ X 20’ Deck
SL-54F5”- 18”1000
SL-54F2 6” - 18”
2000
4 ea Beam Clamps 4 ea Safety Hooks 4 ea Vertical Perforated Stems 4 ea Hangers (for aluminum beams)4 ea 6.5” X 114” Aluminum Beam 3 ea 5.5” X 252” Aluminum Beam18 ea Aluminum Beam Locking Clips3 ea 3/4” X 4’ X 96” Plywood (Rough)*
SL-54FSL-65C
SL-71A72SLP-702TSA1
SL-BM650X114SL-550X252
SL-70ALL
SL-54F2SL-65CHD2SL-71C72
SLP-702TSB4SL-BM650X114
SL-550X252SL-70ALL
PACKAGED WEIGHT (LBS) 382 426
*Plywood not included
Mobile I-Beam Clamp & Hanger Beam ExpansionSafe Working Load (SWL) lbPackage includes: 4’ X 8’ Deck
SL-54F5”- 18”1000
SL-54F2 6” - 18”
2000
4 ea Beam Clamps 4 ea Safety Hooks 4 ea Vertical Perforated Stems 4 ea Hangers (for 4” X 6” Wood)4 ea 2” X 10” X 10’ Scaffold Plank 1 ea 3/4” X 4’ X 8’ Plywood (Rough)*
SL-54FSL-65C
SL-71A72SLP-702ASL-210X10
SL-54F2SL-65CHDSL-71AA72SLP-702ASL-210X10
PACKAGED WEIGHT (LBS) 246 290
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
*Plywood not included
MOBILE PRESTRESSED CONCRETE BEAM CLAMP MODELSMODEL RATED LOAD EXPANSION WT E F
SL-74R45A 2000 Lbs. 14” - 28” 72 45 Deg. 9”
SL-74R64A 2000 Lbs. 14” - 28” 72 64 Deg. 9”
SL-74R45B 2000 Lbs. 26” - 32” 74 45 Deg. 9”
SL-74R64B 2000 Lbs. 26” - 32” 74 64 Deg. 9”
PRESTRESSED CONCRETE BEAM CLAMP MODELSMODEL RATED LOAD EXPANSION WT E F
SL-74S45A 2000 Lbs. 14” - 28” 78 45 Deg. 9”
SL-74S64A 2000 Lbs. 14” - 28” 78 64 Deg. 9”
SL-74S45B 2000 Lbs. 26” - 32” 80 45 Deg. 9”
SL-74S64B 2000 Lbs. 26” - 32” 80 64 Deg. 9”
The Prestressed Concrete I-Beam models are designed to attach and lock onto prestressed concrete I-beams, and to support a suspended platform. Use 4 clamps with safety hooks, stems, and truss or hanger for one complete scaffold assembly. Additional units may be added for a larger working deck.
SL-74S45
This model can be modified to fit custom specifications. See sketch at left for required dimensions when ordering a custom fit clamp.
1. AXLE2. COTTER PIN3. RIGHT HAND BRACKET4. LEFT HAND BRACKET
Rolling
Stationary
(2) Ea.(4) Ea.(1) Ea.(1) Ea.
This kit is designed to change the angle of your concrete Prestressed Beam Clamp with a simple axle connection and relocation of the wheels. These kits are available only for the 45 Degree Prestressed concrete I-Beam Clamps.
SL-74R45
LH Bracket
RH Bracket
Wheels, Thrust Bearings, Washers, and axles are used from existing assembly
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
See page 64 for choice of an alternate Hanger. For example: SLP-702A when using4” X 6” Wood.
ROLLING PRESTRESSED CONCRETE I-BEAM ASSEMBLY MODEL DESCRIPTION Q WT
2000 lb. Cap., 14”-28” exp., 45 deg., Rolling Prestressed Beam ClampStage Aluminum 24”X12’ 2-ManStage Post AdaptorGuardrail Post w/35D & TB LockSafety Rail Lock (2’X4” Wood Rail)Board Lock (Aluminum Beam)Beam Aluminum; 6.5” X 63” w/nailerStem Vertical; 1.75sq. X 72”
4
2668424
288
9618548
204456
910
SL-65CHDSL-70TCD
Safety Swivel Hook Connector; 2k Truss Connector (Aluminum Beam)Wood; 2” X 4” X 5’ (NOT Included)Wood 2” X 4” X 12’ (NOT included)
4444
2424
PACKAGED WEIGHT (LBS) 632
The Prestressed Beam Clamp System is ideal for installing and removing concrete forms. It is a fully adjustable platform along the Vertical Stem. When fully assembled, it provides a mobile platform that can be expanded to include By-Pass attachments when diaphragms, lateral bracing, or stiffners are present. The platform can be enlarged to include several bays.
NOTE:
Stationary Prestressed Beam Clamp (SL-74S series)can be converted to a mobile clamp by adding rollers.See page 19 for all models and conversion kits.
Attach clips and slotted bolt to lock beams at every loca-tion where the beams (top and bottom) intersect
Prestressed concrete I-beam application using aluminum truss and aluminum stagesing
Prestressed concrete I-beam application using aluminum beam and plywood decking
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The By-Pass System is part of a revolutionary concept in scaffold engineering. Instead of using ground scaffolding, working decks are elevated by using clamp and hanger assemblies suspended from existing structural beams. This allows general contractors, painters, and maintenance crews to perform jobs over water, utility lines, high-ways, rugged terrains, and railroads without interrupting traffic and work operations below. Because suspended scaffolding requires few materials, no special tools and minimal labor to erect and assemble, savings of 50% or more are reported over conventional ground scaf-folding. The By-Pass System is designed to simplify the moving of
suspended working decks along the support beams. The suspended scaffold can be moved the entire length of the beam, by-passing cross beams without removing or leaving the working deck.This is accomplished by attaching ratchet binders and stems (com-plete with roller beam clamps) to the I-beam flange. The scaffold roller beam clamp and stem assembly which supports the working deck, is then lowered and the deck is rolled past the cross beam. Once repo-sitioned, the scaffold clamp and stem assembly are reclamped and locked to the beam flange. The ratchet binder and stem are lowered, and work can resume with minimum downtime.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
LARGE BY-PASS PLATFORM SIZES
MODEL SL-706 LARGE BY-PASS SUSPENDED SCAFFOLDNO. PART NUMBER DESCRIPTION QTY
1 SL-BM650X014 Beam Alm; 6.5” X 14’ w/Nailer 4
2 SLP-702TSB1 Truss Hanger Support w/Pin (2” Stem) 8
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Small By-Pass Scaffold System is a mobile platform equipped with four suspension points and four transfer points. The Vertical Stems come with triangular By-Pass Brackets that allow for going around Diaphrams, Stiffeners, and Lateral Braces. The standard packaged platform is four feet wide by the desired length of the platform.
Steel I-Beam Application Using Aluminum Stage Decking
MODEL SL-602 SMALL BY-PASS SUSPENDED SCAFFOLDNO. PART NUMBER DESCRIPTION QTY
1 SL-70B Truss, 48” w/Stage Board Lock 2
2 SL-71A72 Stem, 1.75” Sq. X 72”, Perf. Pre-Galv. 4
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
MOBILE MULTI-LEVEL SCAFFOLDPART # DESCRIPTION QTY
SL-54X 4k RL Roller Beam Clamp, 6-12”Exp., 1.5”J 6SL-65CHD20 Double Stem to Eye Connector 6SL-71CX120 2” Sq. X 10’ Stem 18SLP-702TSB4 Hanger for Aluminum Beam, Short Body 18SL-650X0035 Aluminum Beam 6.5 X 3’6” 20SL-DX2820 Aluminum Stage, 28” X 20’, 3-Man 3SL-10AL 1.5” Sq. X 10’ Alum Guardrail 12SL-GR0380 38” Aluminum Guardrail 12SL-70LWB Sliding Board Lock for Aluminum Beam 22SL-84GRL3 Guardrail Lock 24SL-70L4 Board Lock for Aluminum Beam 2SL-D2810 Aluminum Stage, 28” X 10’, 2-Man 1SLP-702TSB4A Hanger for Aluminum Beam, single 4SL-65ESP20 HD Stem Connector 12
The Mobile Multi-Level Scaffold offers adjustability, functionality, and mobility. The workman can reach areas at various elevations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Mobile Spreader Scaffold provides a single spreader expansion bar and two Roller Beam Clamp jaws, used in situations where there are stiffeners on one side of the girder, preventing movement of the rollers on a standard roller beam clamp.
The mobile Drop-Through Cart is designed for rolling on girder top flange (concrete and steel). It offers a platform that is adjustable, requiring no tools to erect. This modular platform is ideal when deep girders present an access problem in reaching the underside of the roadway. The scaffold is perfect for working between two bridge roadways. Easy erection, easy take down. Adjustable to girder depth above and below flanges. Can be used for various bridge applications.
The Swing-Lo Mobile Traveller Scaffold is designed to provide access to the crane rail. The scaffold can be made to the client’s specification. The Model SL-514CRA runs on a fourteen-foot track which, in turn, rolls on the crane rail. It comes complete with eight foot Vertical Stems, a thirty-eight inch wide by thirty-six inch long platform, access ladder brackets, and brakes.
SL-810DTC DROP-THROUGH ROLLING CART PART NO. DESCRIPTION QTYSL-7010 2 X 3 X 10’ Horizontal Traveller 2612PGC3 Roller Wheels with Brakes 415TSCSA-L Column Support Bracket w/Bumper 215TSCSA-R Column Support Bracket w/Bumper 271A096M 8’ Vertical Perforated Stem 4SL-70C 30” Truss w/Bolt Locks 2SL-D2808 28” X 8’ 2-Man Aluminum Stage 1SL-70L Stage/Truss Board Lock 2SL-15AB036C Horizontal Brace, 36” OC w/Lock CH 2SL-71B48M Perforated Steel Guardrail Post 4SL-84SA Stage Post Adapter 4SL-10AL 10’ Aluminum Guardrail 4SL-15CWA Horizontal Bumper Support 4
MOBILE SPREADER SCAFFOLD PART NO. DESCRIPTION QTYSL-56X15 Spreader Roll Beam Clamp, 1k 2SL-65CHD Safety Hook Connector 4SL-71A072 6’ Vertical Perforated Stem 4SL-DX2820 28” X 20’ 3Man Aluminum Stage 1SL-70L Board Lock 2SL-70C 30” Truss Support 2SL-71B48M Guardrail Post 8SL-84SAH Stage Post Adapter 8SL-20AL 20’ Aluminum Guardrail 4SL-03AL 3’ Endrail 4SL-84GRL8 Guardrail Lock J-Bolt 8
MOBILE DROP-THRU SCAFFOLD
MOBILE TRAVELLER SCAFFOLD
MOBILE SPREADER SCAFFOLD
* Ladder not included
SL-514CRA MOBILE TRAVELLER SCAFFOLD PART NO. DESCRIPTION QTY514CRA-1 Spreader 2 X 4 X 168” 2514CRA-2 Top Support Assembly 2514CRA-3 39” Truss Assembly 2514CRA-4 Horizontal Bumper Arm 4514CRA-5 Track Roller Assembly 4514CRA-6 Ladder Clamp Assembly 215AB037C 37” Horizontal Brace w/ lks 271A096M 96” Vertical Stem 4SL-D1903 19” X 3’ Stage w/Hooks 2SL-03AL 3’ Guardrail 4SL-84GRL Guardrail Lock J-Bolt 8
25
MODEL SL-810DTC
MODEL SL-514CRA
MODEL SL-56X15
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-512BFS Bottom Flange Suspended ApplicationPART NO. DESCRIPTION QTYSL-15LAS Cart Wheels 4SL-70A72M Stage Support Truss 4SL-GB72 Vertical Stem w/Collar Locks 4SL-70CS Truss Support 4SL-70L Board Locks 4SL-4AL 4 ft. Aluminum Guardrail 4SL-12AL 12 ft. Aluminum Guardrail 4SL-84GRL Guardrail Bolt Locks 16SL-D2412 Aluminum Stage 24 in. x 12 ft. 2
SL-512BFR Bottom Flange Riding ApplicationPART NO. DESCRIPTION QTYSL-15LAS Cart Wheels 4SL-70A72M Stage Support Truss 2SL-84SA Stage Adapter 4SL-71B48M Perforated Guardrail Posts 4SL-70L Board Locks 4SL-4AL 4 ft. Aluminum Guardrail 4SL-D2412 Aluminum Stage 24 in. x 12 ft. 2
Designed for rolling on girder and beam flanges, working between two bridge roadways. Easy erection, easy take down. Adjustable to girder depth above and below flanges. Can be used for various bridge applica-tions.
Standard models are for spanning forty-eight inches between girders and designed to use twelve foot stages. This system is not suitable for bridges with stiffners. Please provide all applicable dimensions when inquiring.
The Swing-Lo Top Flange Mobile Scaffold is designed to fit types A, AA, and generic railroad bridges. The platform includes access hatch openings at each end, allowing the worker to step onto the girder for advancing the platform. Sliding gates allow for entry and exit. Foot Brakes, Anti-Tip, Adjust-able Locks, Guardrails (top and mid) on all sides. The inside lower bumper wheels track the girder.
Concrete Girder Application
TOP FLANGE MOBILE SCAFFOLD Rated Load... 500 lbsMODEL NO. DESCRIPTION WT
SL-610CGC 65” X 112” Top Flange Mobile Scaffold 270SL-614PGC 60” X 168” Top Flange Mobile Scaffold 300
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
MOBILE SUSPENDED STRIPPING SCAFFOLD # PART NO. DESCRIPTION QTY1 PSC72AN Prestressed Beam Cart Jaw Assembly 62 PSCB53 Expansion Bar 31” 32 PSCB72 Expansion Bar 50” 37 15AB096F Horizontal Brace 96” 45 SL-HLT55008 5 1/2” x 8’ Aluminum Beam w/nailer 38 SL-71A024M 1 3/4” Sq. x 24” Vertical Stem 64 SLP-702TS Truss Hanger Support for 1 3/4” Stem 63 PSCG24 Cart Scaffold Guardrail Bracket 46 SL-35D Safety Rail Bracket (for 2x4 wood rail) 4
Swing-Lo Mobile Stripping Scaffold is designed to roll along prestressed concrete I-beam flanges. Adjustable expansion bars expand from beam to beam with the wheel assemblies attached at both ends. The Scaffold is equipped with side rollers and brakes to help maintain scaffold stability and mobility. The working deck is adjust-able horizontally as well as vertically to adapt to beam spacing. When fully assembled the scaffold measures from 6 feet to over 10 feet wide and 16 feet long. Dimensions to consider
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL- PSC9320 MOBILE STRIPPING CART ASSEMBLYPART NO. DESCRIPTION QTY
Between-the- girders application allows the worker to get closer to the bottom of the roadway. The Endrails are collapsable, allowing the platform to evade diaphrams and/or diagonal braces. Installation and removal of concrete forms proceeds uninterrupted. The width is adjustable forty-eight inches to fifty-eight inches, and up to twenty feet long.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
When wide-open, clear view suspended working platform is required for over-head construction or maintenance in auditori-ums, fieldhouses, hangers, etc., Swing-Lo beam clamp, stem, and hanger assemblies have proven to be a safe, versatile and economical solution. Configured in an eight foot by eight foot or ten foot by ten foot grid, the modular system can be expanded to any size platform. Rated live load can range from twenty-five pounds per square foot to fifty or more pounds per square foot.
1000 LB SWL ASSEMBLY
Pages 60-62 for beam clamp choicesPages 63-64 for stem and hanger choicesPage 67 for Aluminum Beams & Scaffold Plank
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Increase the size of your platform in a number of con-figurations. Alternate decking materials are available.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Waler Beam Clamps, when used in pairs, provide an effective and efficient scaffold. Commonly used when forming and stripping operations on a bridge deck or fascia require a wider working platform.
Swing-Lo Waler Beam Clamps are used with 2” x 6”, 8”, 10”, or 12” wood beams. Aluminum Channel Trusses (two 2” x 6” spaced back-to-back) or two Steel Channel Trusses are similarly attached to create a cantilevered working deck. Waler Beam Clamps should be evenly spaced (24” - 30” apart) on both the fascia beam flange and a second interior beam flange to accomodate the wood, aluminum, or steel channels 10’ to 16’ long.
After Waler Beams are spaced and positioned, 2” x 10” x 14’ planks are stag-gered approximately 2’ on center and covered with plywood decking. Guard-rail Posts with Toeboards complete the Fascia Waler Scaffold Assembly.
WALER FASCIA BEAM BRACKET
MODEL DESCRIPTION BEAM WIDTH
BEAM THICKNESS
SL-03FBWA 3 ft. Waler Fascia Beam Bracket 8” - 18” 3/4” - 4”SL-03FBWB 3 ft. Waler Fascia Beam Bracket 14” - 24” 3/4” - 4”SL-04FBWA 4 ft. Waler Fascia Beam Bracket 8” - 18” 3/4” - 4”SL-04FBWB 4 ft. Waler Fascia Beam Bracket 14” - 24” 3/4” - 4”SL-05FBWA 5 ft. Waler Fascia Beam Bracket 8” - 18” 3/4” - 4”SL-05FBWB 5 ft. Waler Fascia Beam Bracket 14” - 24” 3/4” - 4”
The Waler Bracket is used as a temporary “cat-walk” support. The system provides a solid base for aluminum stages or planking and plywood decks. The Waler assembly includes guardrail post. See example below for obtaining proper spacing of the Waler Brackets.
Safe Working Load Limits:All Waler Fascia Beam Brackets are designed to support 250 lbs. per foot with 4:1 safety factor. Spacing and working loads are determined as follows:
EX: 4 ft. Waler Bracket = 4ft. X 250 Lbs. = 1000 lbs. 1000 lbs. divided by desired working load of 25 lbs./sq./ft =
1000 lbs. = 40 sq. ft. = 40 sq. ft. = 10 ft. spacing 25 lbs./sq./ft. 4 ft. Bracket
Leveler adjusts from 3/4” - 4” for beam thickness Jaw adjusts to fit a wide range of flange widths. See chart above.
Boardlocks secure aluminum stages.
Guardrail Posts (not shown) are easily removable.
Waler Brackets come in 3’ - 5’ lengths. The SL-05FBW is shown above.
Safe Working Load Specifications:
The Waler Beam Clamp is designed to support a pair of structural members as a cantilever, off a minimum of two (2) I-beams.
Determination of the decking support should be performed by a Licensed Engineer. Choice of structural members must consider the following:
1. Factor of safety of 4:1, based on desired distributed live load.2. End point concentrated load not more than 500 lbs. with 4:1 safety factor 3. Maximum deflection when fully loaded.
Total load shall not exceed Waler Clamp rated load of 2000 lbs., based on the square area of the support members and clamp. The ends of the structural support members should be braced adequately.
Swing-Lo Suspended Scaffold does not assume any liability for use of materials that have not been examined and approved by a certified engineer.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Tank Bracket Scaffold Assembly is designed to be used with clips welded to inside or outside of the tank surface. The Tank Bracket also includes Board Locks to be used with Scaffold Planks or Aluminum Stages. Perforated pre-galvanized guardrail post is included with each Tank Bracket to accomodate cable guardrails. The Tank Bracket comes in three sizes.
Tank Bracket (for Ring Girder)
The Tank Bracket for Ring Girder is used where a steel ribbon is welded to the circumference of a steel tank, providing a stable platform for the worker. The bracket is adjustable for various sizes in width and height.
Tank Bracket for Steel Tank
TANK SCAFFOLD PART NO. DESCRIPTIONSL-24TS 2’ wide Tank Scaffold Bracket w/1 ea Locking Clip,
guardrail post and board lock(s)SL-36TS 3’ wide Tank Scaffold Bracket w/1 ea Locking Clip,
guardrail post and board lock(s)SL-48TS 4’ wide Tank Scaffold Bracket w/1 ea Locking Clip, guard
rail post and board lock(s) SL-18RGB 1.5’ Tank Bracket for Ring GirderSL-71B48M 4’ Perforated Pre-Galvanized Guardrail Post
Guard Rail Post(for wire rope rail)
Number of Tank Brackets required = 3.14 X diameter, then divide by 8
The Mobile Tank Scaffold provides a rolling platform on the inside or outside of a tank wall for easy access to the work surface. The platform can be adjusted along the vertical stem for optimum working elevations. It can, also, be configured for your specific application. The scaffold comes complete with aluminum stage deck and guardrails. The ladder clamp can accommodate any standard ladder (not included in the pack-age). The Mobile Tank Scaffold is ideal for cleaning, re-lining, and re-surfacing of steel tanks.
MOBILE TANK SCAFFOLD
MODELLENGHT OFVERT. STEM
WIDTH(INCHES)
LENGHT(FEET)
SL-100MTS To 24 Ft. 24/28 7 OR 12SL-200MTS VARIES VARIES MODULAR
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-20PSE PIER CAP SCAFFOLD - Pier Cap Width 2’ - 4’PART # DESCRIPTION QTY
The Pier Cap Scaffold is designed to straddle pier caps at two points or more to provide the worker access to areas on both sides and ends of the pier. The standard package allows for twenty-four inch wide by twelve foot aluminum stages. Various sizes are available.
SL-20PTS PIER CAP SCAFFOLD - Saddle Style - Pier Cap Width 6’ - 8.5’ITEM MODEL DESCRIPTION1 SL-20PT085 Pier Cap Top Assembly2 SL-7012 2” X 3” X 12’ Vertical Perforated Stem3 SL-71B48M2 Perforated Steel Pre-Galv. Guardrail Post w/SL-35D Locks4 SL-84SAH Stage Post Adaptor5 SL-24SB 24” Stage Bracket6 SL-DX2430 Aluminum Stage, 24” X 30”; 3-Man7 SL-49B Stage Binder - 24”8 SL-15LAFW Lower Fixed Pad ; Wood Mount9 2” X 4” Wood Guardrail (customer supplied)
The SL-20PTS Pier Cap Scaffold is designed to straddle pier caps at two points or more to provide the worker access to areas on both sides and ends of the pier. Working decks are adjustable for width and length. This model adapts to slopes of eighty-five de-grees on the pier cap. The length of the Platform can be increased using the SL-49B Stage Binder.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The SL-84CC Chord Clamp Assembly is designed to lock onto bridge structures. Standard clamp has a rated load of 1000 lbs. and is 30 inches in width. Clamp comes with J-Bolts for anchoring and a lad-der clamp for easy access to the platform. Other widths available on request.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-54BCC10 BOX CHORD SCAFFOLD - DUAL DECK 24” X 32’PART NO. DESCRIPTION QTYSL-54BCC10 Box Chord Scaffold Assembly w/ Stabilizer Brace 1SL-71C96M Vertical Perforated Stem, 2” X 2” X 8’ 4SLP-702TSB4 Truss Hanger Support, Short Body, w/detent Pins 4SL-70L4 Board Lock for Aluminum Beam - 702TS 4SL-70LWB Board Lock for Aluminum Beam - 6.5” 12SL-BM650X008 Beam, Aluminum; 6.5” X 8’ w/ Plastic Nailer 4
The Swing-Lo Box Chord Scaffold Model SL-54BCC10 is designed to lock onto bridge box chords, providing two twenty-four inch wide by up to forty feet of suspended aluminum decks. Stabilizers limit swaying and provides a rigid platform for a secure working environment.
The Swing-Lo Chord to Parapet Scaffold is designed to connect the Outside Chord to the Bridge Parapet, giving the worker a platform six feet by seven feet. The Scaffold can be modified to a rolling system by adding rollers where appropriate.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-54CSC10 CHORD PLATFORM - CENTER PART NO. DESCRIPTION QSL-54UH10 Box Chord Upper Head Assembly 2SL-15CTE Box Chord Bottom Support 2SL-71E120M Stem, 2.5” Sq. X 120” Perforated 4SL-70G Truss, 25” 2SL-70L Truss Board Lock 2
The Box Chord Scaffold comes in a variety of configurations. They are designed to provide a stable and sturdy working deck to any and all sides of the chord. Add more stirrups to expand the platform length.
SL-54CDS11 DOUBLE SIDE CHORD PLATFORM PART NO. DESCRIPTION QSL-54UH11 Box Chord Upper Head 2SL-15CDS Box Chord Bottom Support 2SL-71E096M Stem, 2.5” Sq. X 120” 4SL-24SBF Stage Bracket, 24” w/ Bd Lck 4SL-71B48M2 Guardrail Post, Perforated w/35D 4
SL-54CSS09 SINGLE-SIDE CHORD PLATFORM PART NO. DESCRIPTION QSL-54UH09 Box Chord Upper Head 2SL-SL-15CSD Box Chord Bottom Support 2SL-71D72M Stem, 2.25” Sq. X 72” 2SL-28SBD Stage Bracket, 28” w/Bd Lck 2
SL-54CSA1 ABOVE CHORD PLATFORM MODEL NO. DESCRIPTION WT
SL-54CSA1 66” X 12.5’ Stationary Scaffold 350
The Swing-Lo Above Box Chord Cantilever Scaffold offers access without limit-ing the size of the working platform. No tools are needed to erect this adjustable and modular platform. The deck may be expanded up to seven feet wide, and up to the desired lenght.; simply add components. The standard platform (as shown) is sixty-six inches wide by twelve and a half feet long. All components except plywood included.
ABOVE BOX CHORD
SINGLE SIDE BOX CHORD
CENTER BOX CHORD
DOUBLE SIDEBOX CHORD
BOX CHORD SCAFFOLD
BOX CHORD CANTILEVER SCAFFOLD
36
END VIEW
MODEL SL-54CSA1
MODEL SL-54CSC3
MODEL SL-54CSS1MODEL SL-54CSD2
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Fixed Beam Saddle Scaffold provides acces to both sides of the beam or girder. The deck is adjustable along the lenght of the vertical stem. The length of the platform can be increased by adding more stirrups.
The Single-Side Beam Scaffold is easily placed and removed where it is needed. It is used for splicing beams and bolting beam sections. Guardrails provided when requested. The platform deck is adjustable along the vertical Stem. Wheels on the base of the Vertical Stem allow the platform to be erected below and rolled into place.
SL-1015B1 SINGLE-SIDE BEAM SCAFFOLD # PART NO. DESCRIPTION QTY1 SL-15US9 Upper Head for pivoting Stem 22 SL-15BRFS2 Horizontal Brace Support 23 SL-71E096M Stem, 2.5” Sq. X 96” Perforated 44 SL-24SBF Stage Bracket, 24” with Board Lock 25 SL-54D5 Side-Mounted Ladder Clamp - 2.5” Sq. 16 15CWA-234N Caster 2
SL-20PSG I-BEAM SADDLE SCAFFOLD # PART NO. DESCRIPTION QTY1 20PSG-1N Top Hanger Body Assembly 22 AR0629 Rod Adj. .75” X 29” 23 SL-71E096M Stem, 2.5” Sq. X 96” Perforated 44 AR0621C Rod Adj. .75” x 21” 25 SL-24SBF Stage Bracket, 24” with Board Lock 46 20PSG-2N Lower Brace Bracket Assembly 2
Designed specifically for railroad bridge inspection and maintenance. The assembly clamps onto the top of the bridge girders. Upper and lower clamp assemblies adjust to top and bottom chords. Standard Vertical Stem lengths are 10 to 12 feet. Additional Stem lengths, Stage Brackets, and Guardrails can be purchased to provide a working platform on both sides and beneath the bridge structure. Guardrails are purchased separately according to job requirements. An alternate configuration can be achieved when Aluminum Stages are used instead of wood decking. In that case, the illustrated Horizontal Truss may be used. Specify width of desired platform.
SL-RRP20 ELEVATED RAIL SCAFFOLD MODEL DESCRIPTION QTY
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Designed specifically for railroad bridge inspection and maintenance. The assembly clamps onto the top of the bridge girders. Upper and lower clamp assemblies adjust to top and bottom chords. Standard Vertical Stem lengths are 10 to 12 feet. Additional Stem lengths, Stage Brackets, and Guardrails can be purchased to provide a working platform on both sides and beneath the bridge structure.
The Extended Girder Clamp Scaffold allows workers to gain easy and safe access to the girder’s fascia by way of a built-in ladder clamp. The 10 Ft. spaced and standard 10 Ft. hinged Vertical Stem makes it easy for one person to install. This modular scaffold allows for two foot by ten foot increments along the structure. Two sizes of the Extended Girder Clamp provides expansion from five to eleven inches, and twelve to eighteen inches. The platform is extended up to 26.5 in. away from the girder.
STATIONARY H-BEAM CLAMP The H-Beam Column Clamp is used in pairs. When attached and locked to a steel H-Beam, the clamps provide a sturdy and secure base for an Aluminum Stage 14 inches wide and up to 40 feet in length. No tools required.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
PARAPET SCAFFOLD
SL-15A Parapet Scaffold features a 24in. x 7ft. working deck that mounts to 8ft., 12ft., and 16ft. perforated vertical stems. Electro-plated steel upper assembly locks into position on most types of rails. Rollers allow you to move entire scaffold along parapet with ease.
Assemble and lock this SL-15A Parapet Scaffold to most bridge rails in minutes with quick-locking pins. Proper assembly saves material and labor costs AND meets or exceeds OSHA’s standards.
Vertical Stem8ft.,12ft. & 16ft.
Aluminum Guard Rails
Working deckwidth/length2ft. x 7ft. or2ft. x 12ft.
The above rail designs are typical, however, the Upper Head Assembly is desinged to fit almost every type of parapet, including guardrails.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Lower Wheel Assembly
Steel Tube on Concrete Rail
D
E
A
B
C
When considering a Parapet Scaffold application, dimensions A, B, C, D, and E are critical in determining the appropriate model.
The Swing-Lo Parapet Scaffold is adaptable to most bridge parapets. The standard Upper Head Assembly will fit a 14 1/2” concrete parapet (A) up to 36 inches. The Upper Head Assembly can also adapt to a 4 inch and larger pipe rail. As in every case, a competent person must determine whether the structure is sufficiently strong to carry the live and dead load.
The Horizontal Bumper allows for up to 5 ft. horizontal support (B). The Horizontal Bumper allows for two types of support. The first application is to support the platform at the web of the girder. The second application allows for multiple platforms when the horizontal support is attached to the bottom flange of the girder.
The platform lengths (C) are 7ft. and 12ft. Only 24in width is provided. At a time of de-termining the number of decks required, please indicate how far under the sidewalk you would need to access.
Letter (D) specifies the length of the vertical stems. When considering the length of the vertical stem, you must determine the deck elevation. Typically 2 - 4 ft is subtracted from the vertical length, because of the stage bracket. The length of the vertical stem is pro-vided in 8, 12, and 16ft options.
Finally, consideration should be given to any obstruction such as, water pipe lines, cable lines, etc. along the bottom face of the parapet (E). In cases where these obstructions exist, a different Upper Head Assembly may be specified, along with a Stand-off pad for the Lower Wheel Assembly (SL-15LAS).
Following this page are several packaged units. Should these packages not meet your requirements, you may configure your own system by going to page 41.
Exterior Guardrails lock into position on Guardrail Posts to give you maximum protection while working. Four Guardrails and four Endrails are required.
Braces (2) hold and maintain the parallel distance of the Vertical Stems for a strong, rigid scaffold. This brace is positioned on the top of the Upper Head Assembly, the other is placed just below the Lower Wheel Assembly, or along the Vertical Stem as desired.
Vertical Stems (2 required) are available in lengths 8, 12, and 16 ft., to give you the right working eleva-tion. Custom lengths available.
Lower Wheel Assembly locks onto Vertical Stems at the elevation you need. Wheels add to scaffold’s mobility.
Stage Brackets (2 required) attach to vertical stems at the elevation you need. Simply add deck and you’re ready to work.
The included Ladder Support locks onto the Vertical Stem and adjusts to accomodate any working elevation. The ladder (not included) is held securely in place. The Lad-der Clamp comes in two sections: top and bottom.
Bumper Wheel Assem-blies add extra support at the lower end of the Vertical Stems and can be used in two different configurations. One is to roll against the web of the I-beam. Another can grip the bottom I-beam flange with two more adjust-able wheels that come standard with the Bum-per Wheel Assembly, as shown below.
The Interior Guardrails between the Vertical Stems are removable to form a 3-sided Guardrail System when access to deck below sidewalk is required.
The Working Platform comes in 2 sizes: 24in. wide x 7 ft. long, and 24 in. wide x 12 ft. long.
NOTE: The Parapet Scaffold can be configured to increase the length along the bridge by adding components.
Upper Wheel Assembly fits over concrete parapet and pipe rails. The Standard Head adjusts from 14.5 inches to 20 inches.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
UPPER HEAD ASSEMBLIESMODEL DESCRIPTION
SL-15UJW Standard Upper Head Assembly w/wheels - 14 1/2”SL-15UHD Heavy Duty Upper Head Assembly w/wheels - 17 1/2”SL-15UHD20 Heavy Duty Upper Head Assembly w/wheels - 20”SL-15UHD36 Heavy Duty Upper Head Assembly w/wheels - 36”MID WHEEL STAND-OFF ASSEMBLIES
MODEL DESCRIPTIONSL-10LAS 3 1/4” x 4” Double Mid Wheel AssemblySL-15LAS 2” x 8” Double Mid Wheel AssemblySL-15LDW 2” x 6” Double Mid Wheel AssemblySL-15BRR1A 2” x 8” Inner Double Mid Wheel Stand-OffPERFORATED VERTICAL STEMSSL-7012 2” X 3” Vertical Perforated Stem 12’SL-7016 2” X 3” Vertical Perforated Stem 16’SL-7512 2” X 6” Vertical Perforated Stem 12’SL-7516 2” X 6” Vertical Perforated Stem 16’HORIZONTAL BRACESSL-15AB059T 1 1/2” Sq. x 5’ Tubing BraceSL-15AB059C 1 1/2” Sq. x 5’ Channel BraceSL-15AB120T 1 1/2” Sq. x 10’ Tubing BraceSL-15AB120C 1 1/2” Sq. x 10’ Channel BraceHORIZONTAL SUPPORTSSL-15CVR Support with 2 each 3 1/4” x 4” V-Rollers, 5’ StemSL-15CVS Support with 2 each 3 1/4” x 4” V-Rollers, 6’ StemSTAGE BRACKETSSL-24SB 2 Ft. Stage BracketSL-24SBB 2 Ft. Stage Bracket w/Clip LockSL-48SB 4 Ft. Stage BracketSL-72SB 6 Ft. Stage BracketALUMINUM STAGESSL-D2407 2 Ft. x 7 Ft. Aluminum Stage (2 Man)SL-D2412 2 Ft. x 12 Ft. Aluminum Stage (2 Man)GUARDRAILSL-GR0800 1 1/2” Sq. X 80” Aluminum GuardrailSL-GR0610B 1 1/2” Sq. X 61” Aluminum GuardrailSL-GR1410 1 1/2” Sq. X 141” Aluminum GuardrailSL-GR1220B 1 1/2” Sq. X 122” Aluminum GuardrailENDRAILSSL-24ERL Endrail 2 Ft., W/15ERL6SL-48ERL Endrail 4 Ft., W/15ERL6SL-72ERL Endrail 6 Ft., W/15ERL6GUARDRAIL POSTSSL-15GRP 1 1/2” Sq. X 48” Aluminum Guardrail PostSL-71B48M 1 1/2” Sq. X 48” Perforated Steel Guardrail PostSL-15GRPA 1 1/2” Sq. X 48” Aluminum Guardrail PostLADDER CLAMPSSL-64A Pipe Ladder ClampSL-64D Side-Mounted Ladder Clamp
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ROLLING PARAPET SCAFFOLD PARAPET SCAFFOLD MODEL NO. SL-15A12D20 2 Ft. x 7 Ft. 1 DeckNO. QTY. MODEL NO. DESCRIPTION
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Total Weight: 650 lbs. 750 LB SWL To configure a 6 ft. platform under sidewalk, deduct Item nos. 13 & 14, then add 2 each SL-72SB (6 ft. Stage Bracket) & 4 each SL-72ERL (6 ft. Endrail Assembly). This will change the model number to SLH-15AA16D26.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Cut the cost of stripping, sandblasting, and maintainence on bridges designed with overhangs. Swing-Lo model SL-25AA is ideal for removing forms. The Upper Assembly extends the scaffold up to 48 inches away from the parapet, positioning the working deck right where the job needs to be done. The scaffold clamps to most bridge rails or parapets, and is equipped with rollers for easy mobility.
This unit requires few components, no tools, and assembles in minutes. It pro-vides safe access to hard to reach areas. It does not interfere with traffic below. Compared to conventional scaffolding, the Parapet Scaffolding can save you up to 50 percent in scaffolding costs.
The SL-15WA Wrap-Around Parapet Scaffold lets you maxi-mize the efficiency of your work force. Wrap-Around design lets you simultaneously work along both sides of the bridge AND un-derneath it. Roller Clamps let you reposition the scaffold as work progresses.
SL-25AA EXTENDED PARAPET SCAFFOLDPART NO. DESCRIPTION QTYSL-25UA Upper Assembly With Wheels (6 in - 16 in. adj.) 2SL-7516 2” x 6” x 16’ Vertical Perforated Stem 2SL-48SB 48” Stage Bracket w/Board Locks 2SL-15AB120X 10 ft. X-Brace 1SL-15AB120C 10 ft. Horizontal Brace 2SL-12AL 1.5 in. sq. x 144 in. Aluminum Guardrail 4SL-48ER 1.5 in. sq. x 48 in. Aluminum Endrail 4SL-15GRP 1.5” sq. x 48” Aluminum Guardrail Post 2SL-64LC Ladder Clamp 1SL-D2412 24” wide x 144” long Aluminum Stage, 500 lb. 2Total Weight: 882 lbs. 500 LB SWL
SL-15WA WRAP-AROUND PARAPET SCAFFOLD PART NO. DESCRIPTION QTYSL-15UJW Upper Assembly With Wheels (6 in - 16 in. adj.) 4SL-7016 2” x 3” x 16’ Vertical Perforated Stem 4SL-15LAS Adjustable Mid Wheel Assembly (2”x8”) 4SL-15CVR Horizontal Brace w/Rotating Vertical Rollers 4SL-24SBB 24” Stage Bracket w/Board Lock 4SL-15AB059C 1.5” sq. x 59” Channel Brace 2SL-15AB059T 1.5” sq. x 59” Tubing Brace 2SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post 4SL-GR0800 1.5” sq. x 80” Aluminum Guardrail 8SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail 8SL-24ERL 1.5” sq. x 24” Aluminum Endrails 8SL-64D Ladder Clamp 2SL-D2407 24” wide x 84” long Aluminum Stage 2SL-15WB Diagonal Brace 4SL-15TS Horizontal Truss Support 4SL-70L Stage/Truss Board Lock 4SL-70A72M 6 ft. Stage Support Truss 2Total Weight: 900 lbs. 500 LB SWL
2 each 28 inch wide x desired length required decks under bridge. Guardrails, Guardrail Post, and Connectors, provided on pages 66-68. Determine quantity and add to package above.
See pageL 57 for Mobile Parapet Fall Protection Clamps.
See pageL 57 for Mobile Parapet Fall Protection Clamps.
44
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Parapet Scaffold can be expanded to increase the deck size up to forty feet.
The Expanded Wrap-Around Parapet Scaffold can be expanded to increase the platform lenght and height.
SL-15WA3 WRAP-AROUND PARAPET SCAFFOLD PART NO. DESCRIPTION QTYSL-15UHD HD Upper Assembly With Wheels (9 -14.5” adj.) 6SL-7520 2” x 6” x 20’ Double-Back Vertical Perforated Stem 6SL-15LAS Adjustable Mid Wheel Assembly (2”x8”) 6SL-15CVR Horizontal Brace w/Rotating Vertical Rollers 6SL-24SB 24” Stage Bracket w/Board Lock 6SL-15AB120C 1.5” sq. x 120” Channel Brace 4SL-84SA Stage Guardrail Post Adapter 8SL-71B48M 1.5” sq. x 48” Aluminum Guardrail Post 8SL-GR1304 1.5” sq. x 130.44” Aluminum Guardrail 8SL-84GRC Guardrail Connector 4SLP-702TSB4A Aluminum Beam Truss Support 12SL-64D Ladder Clamp 2SL-D2422 24” wide x 22’ long Aluminum Stage 2SL-BM750X0240 Aluminum Beam 7.5” X 24’ W/Nailer 4Total Weight: 980 lbs.
Ladder NOT included
See page 41 to configure your platform; See pages 66-68 for aluminum stages and guardrails for connecting two Parapet Systems based on the width of the bridge.
See page 41 to configure your platformSee pages 66-68 for aluminum stages and guardrails
SL-15X320 PARAPET SCAFFOLD PART NO. DESCRIPTION QTYSL-15UJW Standard Upper Head Assembly w/wheels - 14 1/2” 3SL-7012 2” x 3” x 12’ Vertical Perforated Stem 3SL-15LAS Adjustable Mid Wheel Assembly (2”x8”) 3SL-15CVR Horizontal Brace w/Rotating Vertical Rollers 3SL-24SB 24” Stage Bracket w/Board Lock 3SL-15AB096C 1.5” sq. x 96” Channel Brace 2SL-106019700 1.5” sq. x 197” Tubing Brace 1SL-84SAH Stage Post Adapter w/ 1.38” offset from web 8SL-20AL 1.5” sq. x 240” Aluminum Guardrail 8SL-71B48M 1.5” sq. x 48” Aluminum Guardrail Post 8SL-03AL 1.5” sq. x 36” Aluminum Guardrail 4SL-15AK00ST Horizontal Brace Bracket - 5” 3SL-64D Ladder Clamp 1SL-DX2420 24” wide x 20’ long Aluminum Stage; 3-Man 1SL-84GRL8 Guardrail Lock; J-Bolt for 1.5” Endrail 8Total Weight: 980 lbs.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
750 LB SWL
500 LB SWL
See pageL 57 for Mobile Parapet Fall Protection Clamps.
The Heavy Duty Series SLH Parapet Models are ideal for situations where a longer platform is needed without the restrictions of using a fixed brace. By using the Stabilizer brace, the contractor can expand his platform lenght at wider spacing intervals. The platform may be positioned along the Vertical Stem at the desired elevation. The unit below is packaged with-out the aluminum stage so the contractor may make that determination. A twenty-four inch stage bracket is used in this configuration, however, a twenty-eight inch stage bracket may be substituted.
SLH-15X12D20 HD SCAFFOLD SWL 750MODEL DESCRIPTION QTY
1 SL-15UHDF Stationary HD Upper Head 22 SL-7512 2” X 6” X 12’ Double-Back Stem 23 SL-15LAF Fixed Mid Assembly 24 SLH-15ASB Fixed Stabilizer Brace 25 SL-64D Side-Mounted Ladder Clamp 1
Ladder NOT included; contractor may use any standard ladder
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
HD WRAP-AROUND PARAPET SCAFFOLD & CONNECTING BY-PASS PLATFORMThe Heavy Duty SLH-15WAHD Wrap-Around Parapet Scaffold with the connecting By-Pass System offers the flexibility of “wrapping” the bridge. When the width of the bridge prevents you from using the standard wrap-Around Parapet Scaffold (SL-15WA), just add the intermediate rolling system. When there are stiffeners, diaphrams, or other obstructions, include the By-Pass attachments. This system offers strength and flexibility.
HD SLH-15WAHD WRAP-AROUND PARAPET SCAFFOLD & MID BY-PASS SYSTEMMODEL DESCRIPTION QTYSL-15UHD20 HD Upper Head Assembly with
wheels-20”4
SL-7516 2” x 6” x 16’ Double-Back Vertical Perforated Stem
4
SL-15LAS Adjustable Mid Wheel Assembly (2”x8”)
4
SL-15CVRM HD Horizontal Brace w/Rotating Vertical Rollers
Ladder NOT included; contractor may use any standard ladder
SLH-15WAHD
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SL-80DHV2 fits walls 8 1/2 - 18 inches in thicknessSL-25UAV fits walls 6 - 16 inches in thicknessSL-25UAV3 fits walls 12 - 24 inches in thickness
ROLLING BARRIER WALL CLAMPSMODEL DESCRIPTION
SL-80DHV2 Rolling Barrier Wall Clamp SL-25UAV Rolling Extended Parapet Clamp - 3 Ft.SL-25UAV3 Rolling Extended Parapet Clamp - 2 Ft.
The Swing-Lo model SL-80DHV2 Rolling Barrier Clamp with brakes is used with other components to create a stable and effective working platform. Add the CHD-101 Stage Hangers, an Aluminum Stage, Guardrail System, and Winches. A work crew can traverse a Barrier Wall, saving time, and maximizing profits.
Use the SL-25UAV Rolling Extended Barrier Wall Clamp to extend out, up to 4 feet from the wall to avoid obstructions.
SL-80MB MEDIAN BARRIER SCAFFOLD provides a rolling platform on the median Jersey barrier railing from which the paver has access to finishing details on fresh concrete road surfaces. Eliminates worker fatigue from hanging over the barrier. Working deck is approximately 12” to 18” above work surface, with a deck size of twenty-four inches wide by seven feet long.
MOBILE MEDIAN BARRIER SCAFFOLD
48
MODEL SL-80MB
MODEL SL-25UAV MODEL SL-80DHV2 MODEL SL-25UAV3
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
1000 LB SWL 1000 LB SWL 1000 LB SWL
750 LB SWL
The Counter-weighted Overhang Scaffold is ideal for accessing areas up to seven feet under the bridge from the bridge fascia. A two foot access platform is included.
SL-25DD14 with 2 Ft. and 6 Ft. DecksNO PART NO. DESCRIPTION QTY1 25DD14 Counter-Weight Cart w/ wheels & brakes 12 CW-50 50-LB Counterweights 1003 SL-7620 3” X 6” X 20’ Vertical Stem 24 SL-84SB 7’ Stage Bracket 25 SL-28SBE 28” Stage Bracket 26 SL-64D4 Ladder Clamp 17 SL-DX2816 28” X 16’ Aluminum Stage, 3-Man 48 SL-84SAH Stage Post Adapter 109 SL-71B48M2 Perforated Steel Guardrail Post 610 SL-35D Safetyrail Bolt Lock (for 2”X4” wood rail) 2411 2” X 4” X 8’ wood rail (not included) 1212 2” X 4” X 3’ wood rail (not included) 413 Straight Ladder (not included) 1
Model SL-25DD14 Counter-weighted Overhang Scaffold with two-foot access deck, and six-foot interior working deck (illustrated).
49
MODEL SL-25DD14
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
800 LB SWL
The Swing-Lo Girder-Edge mobile scaffold is designed with a Safe Working Load of 800 pounds; with a deck size of 54 inch by 10 Ft., the scaffold is moved along the girder with stiffners, but with sufficient clearance to allow the scaffold to roll. Easy to install, no special tools are required. Wood (4” X 6”) or aluminum beams provide the base, covered with 3/4 inch (rough) plywood or Scaffold Plank decking. All wood, including 2” X 4” guardrails supplied by customer. An optional drive system is offered.
The SL-0812SPC Subway Painting Scaffold is designed to roll on track rails and provide a safe work area overhead that is adjustable in height from 9’ 6” to 11’ 9”. Adjustment is provided by means of screw jacks lo-cated on the top and bottom of the open scaffold frames. Each scaffold is equipped with hand brakes located at the wheel bases. The deck is made of fire retardent material. Anti-tip devices included.Two or more Carts may be used in tandem with the included hitch system.
SUBWAY PAINTING SCAFFOLDMODEL DECK AREA HEIGHT WT
SL-0812SPC 7’ X 12’ 9’ 6” - 11’ 9” 1212
MOBILE GIRDER-EDGE SCAFFOLD
MOBILE RAIL SCAFFOLD
50
MODEL SLH-144A
MODEL SL-0812SPC
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
The Thru-Girder Wrap-Around Scaffold is designed to provide access to all sides of a Thru-Girder railroad bridge.
SL-RRP10 THRU-GIRDER WRAP-AROUND SCAFFOLD MODEL DESCRIPTION QTY
SL-10UA Adjustable Upper Head Assembly 16 - 22” exp. 4SL-7012 12’ Vertical Perforated Stem 4SL-10LAS Lower Wheel Assembly 8SL-24SBB 24” Stage Bracket w/Lock Clips 4SL-15AB059C 1.5” sq. x 59” Channel Brace 2SL-15AB059T 1.5” sq. x 59” Tubing Brace 2SL-15GRPA 1.5” sq. x 48” Aluminum Guardrail Post 4SL-GR0800 1.5” sq. x 80” Aluminum Guardrail 4SL-GR0610B 1.5” sq. x 61” Aluminum Guardrail 4SL-24ERL 1.5” sq. x 24” Aluminum Endrails 8SL-64D Side Mounted Ladder Clamp 2SL-D2407 2’ x 7’ Aluminum Stage 2SL-15WB Diagonal Brace 4SL-15TS Horizontal Truss Support 4SL-70L Stage/Truss Board Lock 4SL-70A72M 6’ Stage Support Truss 2Total Weight: 600 lbs.
2 each 28 inch wide x desired length aluminum stage (not included in package below). Guardrails, Guardrail Post, and Connectors, provided on pages 66-68. Determine quantity and add to package below.
SL-416CRS CANTILEVER PLATFORM PART # DESCRIPTION QTY
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Designed specifically for railroad bridge inspection and main-tenance. The assembly clamps onto the top of the bridge girders. Upper and lower clamp assemblies adjust to top and bottom chords. Standard Vertical Stem lengths are 10 to 12 feet. Additional Stem lengths, Stage Brackets, and Guardrails can be purchased to provide a working platform on both sides and beneath the bridge structure.
RAILROAD SCAFFOLD SYSTEM
TOP SUPPORT MID SUPPORT VERTICAL STEM DECK SUPPORT
Top Girder Clamp: SL-90ER241. Attach to structural plate girder2. 12” - 24” Flange width x up to 5.75” thick3. Lifting Eye for crane setup
Horizontal Support: SL-1515CA1. Supports Vertical Stem from beam web2. 12” - 48” braced from the web
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Stage Bracket: SL-28SBB1. 28” platform width 2. Guardrail Post Support3. Stage security tie down
Guardrail Timber Clamp: SL-10GRH1. Attach to Guardrail timber 2. Fits Guardrail timbers 8” wide x 4” high3. Lifting Eye for crane setup
Horizontal Support: SL-1515CA1. Supports Vertical Stem from beam web2. 12” - 48” braced from the web
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Stage Bracket: SL-28SBB1. 28” platform width 2. Guardrail Post Support3. Stage security tie down
Rail Tie Drop-Thru Hanger1. Assembly drops through rail ties2. Fits minimum opening of 2.75”3. Lifting Eye for crane setup
Tie Support Mid Brace: SL-12TSB1. Braces from bottom of tie2. Adjusts 4” - 8”
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Hanger: SL-702RRH1. Support for 6” wide beam2. Double bolting below base
Concrete Rail Clamp: SL-35BRC11. Clamp to concrete railing2. 8” - 14” concrete width, with 8” fixed fascia standoff3. Lifting Eye for crane setup
Horizontal Support: SL-1515CA1. Supports Vertical Stem from beam web2. 12” - 48” braced from the web
Vertical Stem: SL-71C96, SL-71C1441. 2” x 2” x 8’ or 12’ galvanized perfo-rated, holes 1” on center.
Stage Bracket: SL-28SBB1. 28” platform width 2. Guardrail Post Support3. Stage security tie down
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
WIRE ROPE INSTALLATION - CHOKER
WIRE ROPE INSTALLATION EQUIPMENT - BEAM PART # DESCRIPTION QTY
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
OPEN WEDGE SOCKET
SL-49A HANGERSL-49CI HANGER
CABLE SCAFFOLD 4 FT. WIDE X 10 FT. LONGPART # DESCRIPTION QTY
1 SL-49CIF Cable Roller Insert without brakes 22 SL-49CIB Cable Roller Insert with brakes 23 SL-71A072 Vertical Stem, 1.75” Sq. x 72”; Perf. Pre-Galv. 44 SL-70B Truss, 48”, with Lever-Handle Bolt Locks 25 SL-D2410 Stage Aluminum, 24” X 10’; 2-Man 26 SL-84SA Stage Post Adaptor 47 SL-71B48M Perforated Steel Pre-Galv Guardrail Post 48 SL-10AL Aluminum Guardrail; 1.5” Sq. X 10’ 49 SL-05AL Aluminum Guardrail; 1.5” Sq. X 5’ 410 SL-84GRL Guardrail Lock J-Bolt for 1.5” Sq. 811 SL-70L Truss Board Lock
When the project demands speed and flexibility, this is the system to use. Ideal for spot-work at many locations of the bridge. We pro-vide all engineering data, including wire rope tensioning.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
CABLE SCAFFOLD 4 FT. WIDE X 32 FT. LONGPART # DESCRIPTION QTY
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Static Cable Lines provide an easy snap on connection for workmen’s safety belts. Temporary Perimeter Guardrail Assembly was designed to meet safety requirements for open erected steel girders where a temporary guardrail system is required. It eliminates the welding and removal operation.
The Mobile Fall Protection Parapet Clamps are designed for two workers. Attach a retractable life line, and the system is complete.
Retractable life line here
END VIEW
END VIEW
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ROLLING PARAPET GUARDRAIL SYSTEMMODEL DESCRIPTION QTY
1 SL-99PGRS One set of 3 Rolling Guardrail Brackets 8’ apart w/ SL-35D Safetyrail Locks for top and mid rail
3
2 SL-99PGSS One set of 3 Stationary Guardrail Brackets 8’ apart w/ SL-35D Safetyrail Locks for top and mid rail
3
The Swing-Lo Rolling Rail Fall Protection System meets the Occupational, Safety, and Health Administration’s (OSHA) standards for fall protection. Designed for the Railroad Industry, the system provides protection for the worker covering a specified area. Expand the protected area by adding more roller stanchions and guardrails. The standard system covers sixteen linear feet.
When bridge parapets or guardrails do not meet the Occupational, Safety, and Health Administration’s (OSHA) standards for fall protection, Swing-Lo’s Rolling Parapet Guardrail System provides a mobile and adjustable answer. Sold in sets of three rollers with adjustable vertical post and locks for two by four wood rails, the system meets OSHA standards. The system may be purchased with or without rollers. The stationary brackets are easily convertible to a rolling system by adding rollers. The brackets are spaced eight feet apart. The rolling brackets allow the worker to work within the area covered by the brackets. Extend the work area by adding more rolling brackets and wood rails.
MOBILE TRAIN RAIL GUARDRAIL SYSTEMMODEL DESCRIPTION
SL-RTC18RIS One set of 3 Rolling Stanchions 8’ apart w/ top and mid-rails; 16’ long
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Guardrail Posts and Grating Clamps for hazardous walk and working areas
PERIMETER GUARD RAIL POSTSMODEL DESCRIPTION WT
SL-G080PPC Corner Grid Post 18SL-G080PP Grid Post 15
The SL-G080PP and SL-G080PPC Guardrail Posts are secured by T-Bolt Locks to metal gratings. Guardrails and Toeboards are then attached to provide an entire Guardrail System that keeps hazardous areas in contain-ment and work crews safe.
SL-G080PPC SL-G080PP
Static Cable Lines provide an easy snap on connection for workmen’s safety belts. Temporary Perimeter Guardrail Assembly was designed to meet safety requirements for open erected steel girders where a temporary guardrail system is required. It eliminates the welding and removal operation.
GUARD RAIL POSTSMODEL DESCRIPTION WT
SL-0906P Static Line Post w/Eye Bolt 12SL-71B48M Pre-galvanized /w Toeboard Clips & Locks 9GUARD RAIL CLAMPSSL-71B48G Beam Flange Clamp ( Open Beam ) 12SL-090BSC Beam Static Line Clamp w/SL-0906P Post 18SL-99B2 Dual Static Line Fall Protection H-Beam Clamp 35ACCESSORIESSL-091074 J-Hook for Wire Rope Rail 1SL-35C Safety Rail Bracket ( 2x4 wood rail ) 2SL-84GRL Guard Rail Lock for Aluminum Rail 1TB01 T-Bolt 3/4” 1HNC8 Handle Lock for 3/4” Threaded Rod 1SL-35D Threaded Bolt Stock Guardrail Lock
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ROLLING I-BEAM CLAMP SERIESMODEL SWL (LBS) EXPANSION JAW WT
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
SCISSOR I-BEAM CLAMP MODELS... with WheelsMODEL RATED LOAD EXPANSION A B C WT
BHD #66 1000 Lbs. 6” - 10” 3 1/4” 19 1/2” 4 14
MHD #66 1000 Lbs. 9” - 16” 3 1/4” 19 1/2” 4 15
KHD #66 1000 Lbs. 10” - 18” 3 1/4” 19 1/2” 4 16
SHD #66 1000 Lbs. 14” - 24” 5” 24 1/2” 4 22
“C” MODEL SCISSOR I-BEAM CLAMP... with WheelsMODEL RATED LOAD EXPANSION A B C WT
CBHD #66 1000 Lbs. 6” - 10” 3 1/4” 19 1/2” 13
CMHD #66 1000 Lbs. 9” - 16” 3 1/4” 19 1/2” 14
CKHD #66 1000 Lbs. 10” - 18” 3 1/4” 19 1/2” 15
CSHD #66 1000 Lbs. 14” - 24” 5” 24 1/2” 21
SWEETHEART CLAW CLAMPRATED LOAD STRAP THICKNESS A B
SIZE C D E H WTMODELSP-04
2 TON 1/4” 3/4” 4”6 7/8” 9 1/4” 1/2” 7 7/8” 4 1/2
MODELSP-05
3 TON 1/4” 3/4” 5”8” 10 3/8” 1/2” 8 7/8” 7
MODELSP-06
5 TON 3/8” 3/4” 6”11” 14 3/4” 3/4” 12 1/4” 15 1/2
MODELSP-08
8 TON 3/8” 1” 8”14” 17 1/2” 1” 14 1/2” 22 1/2
MODELSP-10
10 TON 1/2” 2” 10”18” 23” 1 3/8” 19” 42
MODELSP-12
15TON 1/2” 2” 12”22” 28 1/8” 1 1/2” 23 1/8” 67
HEAVY DUTY I-BEAM CLAMPSRATED LOAD STRAP THICKNESS A B
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
CONNECTORSMODEL DESCRIPTION WT
SL-65A Scissor Connector 3
SL-65B Pigtail Connector 3
SL-65C Safety Swivel Hook Connector 6
SL-65CHD Heavy Duty Safety Swivel Hook Connector (1.75”) 6
SL-65CHD2 Heavy Duty Safety Swivel Hook Connector (2.0”) 3
SL-65CHD20 HD Stem-Clampm Connector 12
SL-65D Union Connector 4
SL-65E Vertical Stem Connector (for 1 3/4”) 1.5
SL-65ESP HD Vertical Stem Connector (for 2”) 3
SL-65F Truss to Vertical Stem Connector 7
SL-65H Vertical Stem Connector (for 1 3/4”) 2
SL-15CS Stem to Truss Connector (for 2” Sq. Stem) 6
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
ALUMINUM STAGES
Use aluminum beams as the main support structure, add OSHA compliant Scaffold Planks, and finish with 3/4” plywood as an alternative to aluminum stages.
7 4 SL-D2408 24 SL-D2808 31
12 4 SL-D2412 34 SL-D2812 47
16 5 SL-D2416 43 SL-D2816 69
20 6 SL-D2420 60 SL-D2820 91
24 6 SL-D2424 72 SL-D2824 109
28 6 HD SL-D2428 84 SL-D2828 145
32 6 HD SL-D2432 145 SL-D2832 166
34 6.5 SL-D2434 233 SL-D2834 251
36 6.5 SL-D2436 248 SL-D2836 267
38 6.5 SL-D2438 262 SL-D2838 282
40 6.5 SL-D2440 276 SL-D2840 297
Rail 24” Wide 28” Wide
Lenght Depth MODEL Wght MODEL Wght(Ft.) (In.) NO. (Lbs.) NO. (Lbs.)
ALUMINUM STAGE - TWO-MAN - 500 LB SWL
8 5 SL-DX2408 42 SL-DX2808 45
12 5 SL-DX2412 65 SL-DX2812 70
16 6 SL-DX2416 85 SL-DX2816 100
20 6 HD SL-DX2420 120 SL-DX2820 125
24 6 HD SL-DX2424 145 SL-DX2824 155
28 6 HD SL-DX2428 200 SL-DX2828 220
32 6 HD SL-DX2432 230 SL-DX2832 250
34 7 SL-DX2434 280 SL-DX2834 298
36 7 SL-DX2436 288 SL-DX2836 317
38 7 SL-DX2438 315 SL-DX2838 335
40 7 SL-DX2440 332 SL-DX2840 353
Rail 24” Wide 28” Wide
Lenght Depth MODEL Wght MODEL Wght(Ft.) (In.) NO. (Lbs.) NO. (Lbs.)
Use the aluminum Beam as support member for the suspended scaffold. The standard 6.5” beam is used in most cases. The 7.5” beam is used in cases where more capacity is needed. The aluminum beam contain a 2” sq. plastic nailer strip which provides nail gripping properties. Weather is no problem because the nailer is durable, and will withstand repeated use. Specify the lenght of your beam, and then match it to the hanger of your choice on page 64.
Clips are used to lock beams together when they intersect as shown.
ALUMINUM SUPPORT BEAMS
SCAFFOLD-GRADE PLANK
67
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Each guardrail post is equipped with a toeboard bolt lock (SL-080TB). The customer may rip plywood (5/8” or 3/4” x 4”) for toeboard where required.
ALUMINUM ENDRAIL PER SIDE (TOP & MID)
Each end of a platform using aluminum stage(s) requires endrails (top & mid). To determine endrail size, add six inches to the width of your aluminum platform (the lenght of your endrail), double your quantity (for top & midrail), then add four each SL-84GRL3 Endrail Bolt-Type Locks per side, as shown here. For example, for a 4 Ft. wide platform, the require endrails will be:
Where wood (2” X 4”) is used as guardrails, use SL-35D Safetyrail Bracket.
Where aluminum (1.5” Sq.) is used as guardrails, use SL-84GRL3 bolt-type guard-rail lock.
The choice is given to the customer to use the following fixed endrail models with the Corner Connectors, instead of the flexible endrail using the SL-84GRL3 bolt-type lock illustrated above:
SL-15ER SL-15EREC
SL-84GRC GUARDRAIL CONNECTOR
GUARDRAIL(TOP)
SL-15EREND RAIL
(TOP)
SL-84SA STAGE ADAPTER
SL-B80TB TOEBOARD CLAMP
SL-84GRLGUARDRAIL LOCK
GUARDRAIL POST
GUARDRAIL(MID)
SL-15EREND RAIL
(MID)
GUARDRAILS & POST ACCESSORIESMODEL DESCRIPTION WT QTY
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
I GENERAL GUIDELINES
A. POST THESE SAFETY GUIDELINES in a conspicuous place and be sure that all persons who erect, use, locate, or dismantle suspended scaffold systems are fully aware of them and also use them in tool box safety meetings. B. FOLLOW ALL SWING-LO SUSPENDED SCAFFOLD RECOMMENDATIONS including safe loading capacities of each suspended scaffold component, as well as all State, Local and Federal codes, ordinances, and regulations relating to suspended scaffolding. C. SURVEY THE JOBSITE. A survey shall be made of the jobsite by a competent person for hazards such as Electrical Power Lines. All hazardous or potential hazardous conditions should be corrected before erecting or using suspended scaffold systems. D. INSPECT ALL EQUIPMENT BEFORE EACH USE. Never use any equipment that is dam- aged or defective in any way. Mark it or tag it as damaged or defective equipment and remove it from the jobsite. E. CARE SHOULD BE USED IN DISTRIBUTING LOADS EVENLY. Recommended distri- buted work load must not be exceeded. F. DO NOT ERECT, DISMANTLE OR ALTER THE SUSPENDED SCAFFOLD unless under the supervision of a competent person. The scaffold must be erected PLUMB and LEVEL. G. DO NOT ABUSE OR MISUSE SUSPENDED SCAFFOLD EQUIPMENT such as hitting with a hammer or a heavy object. Never overload platforms. H. ERECTED SUSPENDED SCAFFOLDS SHOULD BE CONTINUOUSLY INSPECTED by the user to ensure the scaffolds are maintained in a safe condition. Scaffold should be inspected prior to each day’s use. Report any unsafe condition to your supervisor. I. NEVER TAKE CHANCES! IF IN DOUBT REGARDING THE SAFETY OR USE OF THE SCAFFOLD, CONSULT THE SUPPLIER/MANUFACTURER. J. NEVER USE SUSPENDED SCAFFOLD EQUIPMENT FOR PURPOSES OR IN WAYS FOR WHICH IT WAS NOT INTENDED. Do not modify or alter any component without express writ- ten permission from Swing-Lo Suspended Scaffold Company. K. CARE SHOULD BE TAKEN WHEN OPERATING EQUIPMENT DURING WINDY CONDITIONS. L. USE APPROPRIATE DECKING MATERIAL, such as 4” X 6” Southern Pine, Douglas Fir, or alu- minum beam, OSHA compliant scaffold plank, and 3/4” plywood (when using wood deck), or standard alumi- num scaffold stage. M. THE SCAFFOLD DECK SHOULD HAVE A MINIMUM OVERHANG OF 18” BEYOND THE END SUPPORTS. N. DO NOT WORK ON SUSPENDED SCAFFOLD if your physical condition is such that you feel dizzy or unsteady in any way. O. DO NOT WORK UNDER THE INFLUENCE of alcohol or illegal drugs.
II GUIDELINES FOR USE OF SWING-LO SUSPENDED SCAFFOLD SYSTEMS
A. WEAR FALL PREVENTION EQUIPMENT when erecting and using suspended scaffold. Fall prevention equipment must be independent of the suspended scaffold, AND the anchorage point must be capable of holding a minimum of 5000 pounds per person attached. B. VERIFY THE STRUCTURE WILL SUPPORT the suspended loads with a safety factor of 4.
Adapted from: Scaffod & Access Industry Association (SAIA) The Scaffold, Shoring & Forming Institute (SSFI)
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Visually inspect all rollers/wheels are secure and in proper alignment Visually inspect all Expansion Bars ensuring they are straight, and no bending has occurred
Inspect Vertical Stems and ensure they are plumb and level. Check that all bolts/pins on connections are in place and secure Ensure all horizontal braces are in place and properly secured (bolt and pins in place and secured)
Ensure all deck planks are in good order and properly secured (bolts and pins in place and secure)
Ensure all stage brackets are in place and properly secured (bolts and pins in place and secure)
Inspect all guardrails and posts to ensure all brackets are in place and secured (bolts and pins in place and secure)
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
Barrier Mobile Scaffold..................................................................48Bascule Bridge Scaffold................................................................14Beam Clamp and Hanger Mobile Scaffold.....................................18Beam Clamp and Hanger Stationary Scaffold...............................30Beam Clamps, Mobile....................................................................60Beam Clamps, Mobile Scissors.....................................................62Beam Clamps, Stationary..............................................................61Beam Clamps, Stationary Heavy Duty..........................................62Beam Clamps, Stationary Screw Type..........................................61Beam Clamp and Truss Mobile Scaffold........................................18Beam Clamp and Truss Stationary Scaffold..................................30Between Girder Concrete Beam Top Flange................................26Between Girder Steel Beam Flange Scaffold...............................26Box Chord Cantilever Scaffold.....................................................36Box Chord Single, Double, and Center Scaffold..........................36Box Chord to Parapet Scaffold..................................................35Box Chord Top Scaffold................................................................35By-Pass Scaffold System........................................................21-23
GGirder-Edge Mobile Scaffold............................................................50Grid Scaffold (“Dance Floor”)..........................................................29Guardrail, and Accessories........................................................66,68Guardrail, Parapet Rolling System..................................................58Guardrail, Train Rail Rolling System................................................58Guardrail, Perimeter System...........................................................59 Guardrail, Static Line System..........................................................59
TTank Scaffold Mobile.......................................................................32Tank Scaffold Stationary..................................................................32Thru-Girder Wrap-Around Mobile Scaffold.....................................51Traveller Mobile Scaffold.................................................................25Trusses Steel..................................................................................63
Waler Beam Clamp Scaffold...........................................................31Waler Fascia Beam Scaffold...........................................................31Wheels............................................................................................65Winch Frame Hanger Scaffold........................................................17
W
All products must be used in accordance with Swing-Lo Suspended Scaffold Company’s Safety Instructions, and all Local, State, and Federal Safety Regulations.
All products and applications depicted in this catalog are for illustration purposes only. Ultimately, only Swing-Lo technicians, engineers, or the client’s engineer must provide final approval for the specific application of Swing-Lo Products. We are not responsible for any typographical errors.
VER21JA
Swing-Lo Suspended Scaffold Company PO Box 128 Covert Michigan 49043 Designers, Engineers & Manufacturers Special Overhead Scaffolding SINCE 1955 Customer Service: (866) 764-8989 Office: (269) 764-8989 FX (269) 764-8897 www.swing-lo.com E-mail: [email protected]●
Our Products are only the beginning. Swing-Lo Suspended Scaffold is a one-stop destination for your suspended scaffolding. A company where safety is paramount, we pride ourselves on our over fifty-five year history of supplying safe and durable suspended scaffolding worldwide. Contact us or visit us online to discover all the ways our design and engineering professionals can help you find solutions to your access problems.