A-J Manufacturing Co. • PO BOX 270320 • 3601 East 18th Street • Kansas City, MO 64127 • Phone 816-231-5522 • Fax 816-231-8437 • Toll Free 800-247-5746 This submittal is meant to demonstrate general dimensions of this product. The drawings are not meant to detail every aspect of the product. Drawings are not to scale. A-J Manufacturing reserves the right to make changes without written notice. Submittal Flat Radial Diffuser Drop Face FRD 3/16” RD ON 1/4” STAGGERED CENTERS - 51% Free Area (4.75 mm x 3.35 mm) ORDER SIZE - .250” (6.35 mm) DROP FACE .500” (12.7 mm) ORDER SIZE - .250” (6.35 mm) Safety Cables Optional Filter Clips Ultra-Fine Perforated Screen 24 Gauge SS Baffles 24 Gauge SS Baffles 51% Perf Baffles Factory Standards: • Type 304 Stainless Steel • Safety Cables • #10 x 1.5” Stainless Truss Head Sheet Metal Screws • #4 Satin Polished Finish Factory Options (Extra Charge): U.S. Units to Metric Conversion INCHES x (25.4) = MILLIMETERS Type 316 Stainless Steel HEPA Rack with 9” Plenum 1” Filter Rack 2” Filter Rack Baked Epoxy-Polyester Hyrid Powder Coat Finish Available Minimum W x H Maximum W x H 9” x 9” 48” x 24” 2.080” (52.83 mm) 1.375” (34.93 mm) T-BAR LAY-IN DETAIL 1000 Plaster Frame with 1/4”turn fastener ORDER SIZE - 2.844” (63.5 mm) Duct Opening - .125” (3.175 mm) 2.500” (76.2 mm) 6” (152.4 mm)