STUDI GANGGUAN KOBALT, NIKEL DAN TEMBAGA PADA PENETAPAN BESI DENGAN SPEKTROFOTOMETRI SERAPAN ATOM DALAM NYALA UDARA - ASETILEN
STUDI GANGGUAN KOBALT, NIKEL DAN TEMBAGAPADA PENETAPAN BESI DENGAN SPEKTROFOTOMETRI SERAPAN ATOM
DALAM NYALA UDARA - ASETILEN
T 546.621 65 BUD
ABSTRAK
Terdapatnya gangguan dalam analisa secara spektros-
kopi serapan atom akan mempengaruhi keakuratan hasil pe-
netapan.
Tujuan penelitian ini adalah untuk menemukan jawaban
masalah : "Bagaimana pengaruh (gangguan) unsur-unsur logam
kobalt, nikel dan tembaga, jika masing-masing unsur ter-
sebut berada dalam satu campuran dengan besi, serta bagai-
mana mengatasi gangguan itu".
Langkah-langkah penelitian yang dilakukan adalah me-
netapkan kondisi optimum analisa besi, mengetahui pengaruh
variasi konsentrasi logam-logam pengganggu terhadap nilai
absorbans besi pada konsentrasi tertentu dalam medium HCl,
HNO3 dan H2SO4, mengetahui Pengaruh kondisi nyala terhadap
nilai absorbans besi, serta mengetahui pengaruh penambahan
zat organik tertentu ke dalam matriks larutan sebagai upaya
untuk mengatasi gangguan.
Hasil penelitian menunjukkan bahwa tiga unsur tersebut
di atas memberikan gangguan yang cukup serius, yaitu me-
nurunkan nilai absorbans besi pada kondisi optimum analisa-
nya. Besarnya gangguan tersebut sangat tergantung pada kon-
disi nyala yang berhubungan dengan laju alir gas asetilen,
tinggi pembakar, dan juga tergantung pada jenis anion yang
terdapat dalam larutan. Diketahui bahwa dalam medium HNO3
dan H2SO4 gangguan yang terjadi lebih besar bila dibanding
dalam medium HCl.
Diketahui pula bahwa senyawa 8-Tidroksikuinolia (aksin)
dapat berfungsi sebagai zat pembebas gangguan yang efek-
tip pada konsentrasi yang lebih besar dari konsentrasi
logam-logam pengganggu.
Dari segi pandangan aplikasi, menunjukkan bahwa me-
tode analisa secara spektroskopi serapan atom memiliki
kecermatan cukup tinggi, yang dapat terlihat dari nilai
simpangan baku (s) yang diperoleh. Pada penetapan besidalam contoh kawat tembaga, diperoleh nilai simpangan
baku 2,5 untuk penetapan tanpa penambahan oksin ,
dan 1,09 untuk penetapan dengan penambahan oksin. Pada
penetapan besi dalam contoh kawat kasa, diperoleh nilai
simpangan baku 0,18 untuk penetapan tanpa penambahan
oksin, dan 1,98 untuk penetapan dengan penambahan
oksin.
ABSTRACT
The presence of the interference in the analysis
with the atomic absorption spectroscopy will influencethe accuracy of the result.
The aim of this investigation is to find the answerof the problems :" How is the effect (thee interference)
of the elements cobalt, nickel and copper, when each e-lement is in one mixture with iron, and how do we over—
come that interference ?"
The steps in this investigation are carried out
by determining the optimum analytical condition of iron;
to know the effect of the concentration variation of the
interfering elements towards iron absorbance at a certain
concentration in HCl, HNO 3 and H2SO4 medium; to know the
effect of the flame condition towards iron absorbance ;
and to know the effect of adding certain organic agent to
the matrix solution as a means to overcome the inter
ference.
The result of this investigation showed that those
three elements interfered seriously, they decreased the
iron absorbance at optimum analytical condition. The
magnitude of those interferences strongly depends on the
flame condition with respect to acetylene gas flows rate,
the height of the burner and is also depends on the anion
present in solution. It was known that in HN03 and H2SO4
lx
medium, the interference observed was greater than in Hcl
medium. It was also known that 8-hydroxyquinoline (oxine)
can also function as an effective releasing agent at a
greater concentration than the interfering elements
concentration.
From the application of view point, showed that the
anaysis method by way of atomic absortion spectroscopy
has a high precision that could be seen from the standard
deviation (s) value. On the iron determination in copperwire sample, the standard deviation value was 2,5 for the
determination without oxine, and 1,09 for the determina-
tion with oxine. On the iron determination in netting
wire sample, the standard deviation value was 0,18 for
the determination without oxine, and 1,98 for the deter
mination with oxine.