144 Accessories and Covers Steel Cable Tray – Tray covers are available for all classes of tray. They should be installed where falling objects may damage cables or where vertical tray run is accessible by pedestrian or vehicular traffic. Outside cable tray runs should be covered with a Peaked Flanged cover to protect cable from the elements and excess build up of snow and ice. Tray Covers – These covers provide maximum mechanical protection for cables with limited heat build up. Solid covers are available with or without flange. Flanged covers have 1/2" flange. Solid Covers – This design offers excellent mechanical protection while allowing heat produced by cables to dissipate. Ventilated Flanged Covers – Peaked covers offer mechanical protection plus prevents accumulation of liquid on the cover. Peaked covers have 15° rise at the peak. Covers greater than 12" wide *available in 72" and 3 m lengths. Peaked Flanged Covers Solid Flanged Solid Non-Flanged Ventilated Flanged Peaked Flanged Cover mounting hardware must be ordered separately. Cover mounting hardware must be ordered separately. Cover mounting hardware must be ordered separately.
12
Embed
Steel Cable Tray - Gescan - Distributor of Electrical ... Steel Accessories, Splice Plates Cable Tray Splice Plate Packaged in pairs with zinc plated hardware. Provided as standard
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
144
Accessories and Covers
SteelCable Tray
– Tray covers are available for all classes of tray. They should be installed where falling objects may damage cables or where vertical tray run is accessible by pedestrian or vehicular traffic.
Outside cable tray runs should be covered with a Peaked Flanged cover to protect cable from the elements and excess build up of snow and ice.
Tray Covers
– These covers provide maximum mechanical protection for cables with limited heat build up. Solid covers are available with or without flange. Flanged covers have 1/2" flange.
Solid Covers
– This design offers excellent mechanical protection while allowing heat produced by cables to dissipate.
Ventilated Flanged Covers
– Peaked covers offer mechanical protection plus prevents accumulation of liquid on the cover. Peaked covers have 15° rise at the peak. Covers greater than 12" wide *available in 72" and 3 m lengths.
Peaked Flanged Covers
Solid Flanged Solid Non-Flanged
VentilatedFlanged
Peaked Flanged
Cover mounting hardware must be ordered separately.
Cover mounting hardware must be ordered separately.
Cover mounting hardware must be ordered separately.
Designed to provide a smoothradiused surface at any position onthe tray or trough bottom. Drop-Outsare easily attached using hardwareprovided.Standard Radius = 4".
Designed to pass through wallsand fire walls.Hardware included.
Note: Not Fire Rated. Fire Stop not included.
Designed to secure tray toelectrical enclosures andpanels.
Hardware included.
Allows for thermal expansionand contraction of cable traysover supports.
(*) Insert Siderail Height(**) Insert Width of Tray
Ste
elA
cces
sorie
s
(*) Insert Siderail Height(**) Insert Width of Tray
154
SteelCable Tray Accessories, Barrier Strips
Inside/Outside Vertical Bend Barriers
Barrier Strips
Barrier Strips provide a methodof separating cables in tray andtrough systems. Easily installedusing supplied hardware orBarrier Strip Clamps (soldseparately). 72" Barriers areflexible for use with horizontalfittings.
Material SiderailPrefix Height *Length Catalogue Number
Preformed to fit all standardsteel vertical bends.Provided with hardware.