star-tribeca
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
© 2
01
2 s
onoma t
ilemakers.
all r
ights r
eserved.
417 75%
www.sonomatilemakers.com
star-t
rib
eca
key usage & installation notes
These tiles are made with a semi-absorbent talc clay body and particular attention should be paid to: 1) installation of an absorbent clay body; 2) usage of matte glazes; 3) extra care required for crackles in wet areas
Star-TriBeCa mattes have a high resistance to abrasion, but may be prone to some surface staining
For crackles, always use a penetrating sealer during installation
See STM Tech Info at sonomatilemakers.com for more detailed info
HanDCRaFteD CHaRaCteRistiCs
Variation in shade, texture, color and size are inherent characteristics of handcrafted tile. Star-TriBeCa glazes are applied solely by hand and, as such, they are particularly subject to wide variation from tile to tile. As such, the tiles finally purchased will vary from both the catalog illustrations and samples. See Tech Info at sonomatilemakers.com for more information.
insPeCtion anD installation
Always inspect your tiles before they are installed, as installation of material constitutes acceptance. Any questions as to acceptability must be resolved before installation. We are in no way responsible for the installation of our tiles or thereafter. The responsibility for correct installation rests with the end user.
star-tribecasuggesteD aPPliCations
Walls
Light Duty Floors
Light Duty Countertops
We hand craft our tile in the California Wine Country. From the moment we remove the clay from the earth to the time it is installed as beautiful, sustainable tile – our practices respect the planet, our hometown, our employees and our clients. We are committed to eliminating waste from our production process, utilizing clean energy practices and protecting the environment.
Our clay is consciously excavated in the USA – we utilize every bit of it.
We produce over 150 colors and finishes comprised of natural minerals. Our glazes are 100% lead-free and non-toxic
We have over 180 solar panels on the roof of our factory building. We are the largest solar energy manufacturer in our hometown of Windsor, CA
We continually invest in state-of-the-art machinery to maximize energy efficiency
We utilize a sophisticated dust collection system throughout our factories for healthier air
We have partnered with CarbonFund.org to offset the carbon produced from shipping our product
Our shipping boxes are compliant with the Sustainable Forestry Initiative. They are made with a minimum of 70% post and pre-consumer recycled materials and are printed with soy-based inks
We recycle all paper, plastic, cardboard, styrofoam boxes and wooden pallets in every department
“Greener Every Day”
PHOTO: 4 X 4 SQUARE EDGE & ATHENA IN STAR WHITE, DUANE IN ROCKY, LORIEN IN GRANITE. DESIGNER: JASON BALL INTERIORS.
use this trim mark to accomodate for 3 hole punch
use this trim mark to accomodate for 3 hole punch
trim line
COVER PHOTO: 3 X 6 SABLE. DESIGNER: URRUTIA DESIGN
|2star-tribeca
sonoma t
ilemakers
carved designs
all pieces shown in bossy gray. variation in size, color, and shade to be expected.
S TAR - TR I BECA
3|star-tribeca
sonoma t
ilemakers
PARK PLACE 8” X 6”
DOMINICK 4” X 8”
BROADWAY 4” X 8”
COLLISTER 8” X 4 1/2”
WALKER 1 3/4” X 6”
READE 3” X 3” VARICK 3” X 3”
BARCLAY 3” X 6”
GREENWICH 2” X 8”
WORTH 2” X 8”
CORTLAND 2 1/2” X 8”
RENWICK 6” X 6”
HUDSON 6” X 6”
CHEVRON 2 3/4” X 6”*to be used with any 2” x 2” design
APOLLO 2” X 2”
ACE 2” X 2”
LORIEN 2” X 2”
SHAKER WEAVE 6” X 6”
SHAKER WEAVE 4” X 4”
SHAKER WEAVE2” X 2”
JESTER 6” X 6”
ATHENA 4” X 4”
CARNIVAL 3” X 6”
CORINTHIAN 2” X 6”
OLYMPIA 2 3/4” X 6”
HELENA 1 3/4” X 6”
AURORA 1 3/4” X 6”
SPARTA 1 3/4” X 6”
PHOTO: 4 X 8 FIELD IN STAR WHITE
|2star-tribeca
sonoma t
ilemakers
carved designs
all pieces shown in bossy gray. variation in size, color, and shade to be expected.
S TAR - TR I BECA
3|star-tribeca
sonoma t
ilemakers
PARK PLACE 8” X 6”
DOMINICK 4” X 8”
BROADWAY 4” X 8”
COLLISTER 8” X 4 1/2”
WALKER 1 3/4” X 6”
READE 3” X 3” VARICK 3” X 3”
BARCLAY 3” X 6”
GREENWICH 2” X 8”
WORTH 2” X 8”
CORTLAND 2 1/2” X 8”
RENWICK 6” X 6”
HUDSON 6” X 6”
CHEVRON 2 3/4” X 6”*to be used with any 2” x 2” design
APOLLO 2” X 2”
ACE 2” X 2”
LORIEN 2” X 2”
SHAKER WEAVE 6” X 6”
SHAKER WEAVE 4” X 4”
SHAKER WEAVE2” X 2”
JESTER 6” X 6”
ATHENA 4” X 4”
CARNIVAL 3” X 6”
CORINTHIAN 2” X 6”
OLYMPIA 2 3/4” X 6”
HELENA 1 3/4” X 6”
AURORA 1 3/4” X 6”
SPARTA 1 3/4” X 6”
PHOTO: 4 X 8 FIELD IN STAR WHITE
PHOTO: 2X8 FIELD IN STAR WHITE, HARRISON AND RENWICK IN DUSK
S TAR - TR I BECA
|4star-tribeca
sonoma t
ilemakers
5|star-tribeca
sonoma t
ilemakers
all pieces shown in bossy gray. variation in size, color, and shade to be expected.
liners
MURRAY 1/2” X 8”
JAY 3/4” X 8”
WARREN 1/2” X 8”
VESTRY 1” X 8”
TRIMBLE 1/2” X 8”
WESTSIDE 3” X 8”
CANAL 2 1/2” X 8”
HARRISON 1 1/2” X 8”
THOMAS 2 1/2” X 8”
DUANE 2” X 8”
MOORE 3/4” X 8”
ATHENS 3/4” X 6”
LUTE 3/4” X 6”
BUTTE 1/2” X 6”
CANDY TWIST 1/2” X 6”
LUTHIEN 1” X 6”
TROY 1” X 6”
ARTEMIS 2 1/2” X 6”
HERA 2 1/2” X 6”
DELPHI 3 1/4” X 6”
ULYSSES 3 1/2” X 6”
ZEUS 6” X 6”
mouldings
PHOTO: 2X8 FIELD IN STAR WHITE, HARRISON AND RENWICK IN DUSK
S TAR - TR I BECA
|4star-tribeca
sonoma t
ilemakers
5|star-tribeca
sonoma t
ilemakers
all pieces shown in bossy gray. variation in size, color, and shade to be expected.
liners
MURRAY 1/2” X 8”
JAY 3/4” X 8”
WARREN 1/2” X 8”
VESTRY 1” X 8”
TRIMBLE 1/2” X 8”
WESTSIDE 3” X 8”
CANAL 2 1/2” X 8”
HARRISON 1 1/2” X 8”
THOMAS 2 1/2” X 8”
DUANE 2” X 8”
MOORE 3/4” X 8”
ATHENS 3/4” X 6”
LUTE 3/4” X 6”
BUTTE 1/2” X 6”
CANDY TWIST 1/2” X 6”
LUTHIEN 1” X 6”
TROY 1” X 6”
ARTEMIS 2 1/2” X 6”
HERA 2 1/2” X 6”
DELPHI 3 1/4” X 6”
ULYSSES 3 1/2” X 6”
ZEUS 6” X 6”
mouldings
use this trim mark to accomodate for 3 hole punch
use this trim mark to accomodate for 3 hole punch
trim line
S TAR - TR I BECA
6” X 6” FIELD
4” X 4” FIELD
3” X 6” FIELD2” X 2” FIELD
7” X 4”RHOMBOID FIELD
4” X 8” FIELD
field & trim
3” X 9” FIELD 4” X 12” FIELD
2” X 8” FIELD
3” X 3” ANGLE 4”X 4” ANGLE 6” X 6” ANGLE 1” X 6” QUARTER ROUND BEAK
6” X 6” BULLNOSE
3” X 6” LONG EDGE BULLNOSE 4” X 8” LONG EDGE BULLNOSE
4” X 8” SHORT EDGE BULLNOSE
4” X 4” BULLNOSE
3” X 6” SHORT EDGE BULLNOSE
8|star-tribeca
sonoma t
ilemakers
STAR WHITE GLOSS
PEARL MATTE
BUTTER CRACKLE
TWINE CRACKLE
TOAST CRACKLE
BOSSY GRAY GLOSS
DUSK CRACKLE
TRELLIS GREEN GLOSS
GRANITE GLOSS
SABLE GLOSS
SEQUOIA GLOSS
CREAMY CRACKLE
OYSTER MATTE
BISCUIT GLOSS
IN ADDITION TO THE COLORS SHOWN ABOVE ALL STAR-TRIBECA DESIGNS ARE AVAILABLE IN STELLAR AND ARTISAN GLAZES.
color palette
all pieces shown in bossy gray. variation in size, color, and shade to be expected.|6star-tribeca
sonoma t
ilemakers
2” X 8” SHORT EDGE BULLNOSE
2” X 8” LONG EDGE BULLNOSE
4” X 12” LONG EDGE BULLNOSE
4” X 12” SHORT EDGE BULLNOSE
3” X 9” SHORT EDGE BULLNOSE
3” X 9” LONG EDGE BULLNOSE
2” X 2” ANGLE
use this trim mark to accomodate for 3 hole punch
use this trim mark to accomodate for 3 hole punch
trim line
S TAR - TR I BECA
6” X 6” FIELD
4” X 4” FIELD
3” X 6” FIELD2” X 2” FIELD
7” X 4”RHOMBOID FIELD
4” X 8” FIELD
field & trim
3” X 9” FIELD 4” X 12” FIELD
2” X 8” FIELD
3” X 3” ANGLE 4”X 4” ANGLE 6” X 6” ANGLE 1” X 6” QUARTER ROUND BEAK
6” X 6” BULLNOSE
3” X 6” LONG EDGE BULLNOSE 4” X 8” LONG EDGE BULLNOSE
4” X 8” SHORT EDGE BULLNOSE
4” X 4” BULLNOSE
3” X 6” SHORT EDGE BULLNOSE
8|star-tribeca
sonoma t
ilemakers
STAR WHITE GLOSS
PEARL MATTE
BUTTER CRACKLE
TWINE CRACKLE
TOAST CRACKLE
BOSSY GRAY GLOSS
DUSK CRACKLE
TRELLIS GREEN GLOSS
GRANITE GLOSS
SABLE GLOSS
SEQUOIA GLOSS
CREAMY CRACKLE
OYSTER MATTE
BISCUIT GLOSS
IN ADDITION TO THE COLORS SHOWN ABOVE ALL STAR-TRIBECA DESIGNS ARE AVAILABLE IN STELLAR AND ARTISAN GLAZES.
color palette
all pieces shown in bossy gray. variation in size, color, and shade to be expected.|6star-tribeca
sonoma t
ilemakers
2” X 8” SHORT EDGE BULLNOSE
2” X 8” LONG EDGE BULLNOSE
4” X 12” LONG EDGE BULLNOSE
4” X 12” SHORT EDGE BULLNOSE
3” X 9” SHORT EDGE BULLNOSE
3” X 9” LONG EDGE BULLNOSE
2” X 2” ANGLE
use this trim mark to accomodate for 3 hole punch
use this trim mark to accomodate for 3 hole punch
trim line
S TAR - TR I BECA
6” X 6” FIELD
4” X 4” FIELD
3” X 6” FIELD2” X 2” FIELD
7” X 4”RHOMBOID FIELD
4” X 8” FIELD
field & trim
3” X 9” FIELD 4” X 12” FIELD
2” X 8” FIELD
3” X 3” ANGLE 4”X 4” ANGLE 6” X 6” ANGLE 1” X 6” QUARTER ROUND BEAK
6” X 6” BULLNOSE
3” X 6” LONG EDGE BULLNOSE 4” X 8” LONG EDGE BULLNOSE
4” X 8” SHORT EDGE BULLNOSE
4” X 4” BULLNOSE
3” X 6” SHORT EDGE BULLNOSE
8|star-tribeca
sonoma t
ilemakers
STAR WHITE GLOSS
PEARL MATTE
BUTTER CRACKLE
TWINE CRACKLE
TOAST CRACKLE
BOSSY GRAY GLOSS
DUSK CRACKLE
TRELLIS GREEN GLOSS
GRANITE GLOSS
SABLE GLOSS
SEQUOIA GLOSS
CREAMY CRACKLE
OYSTER MATTE
BISCUIT GLOSS
IN ADDITION TO THE COLORS SHOWN ABOVE ALL STAR-TRIBECA DESIGNS ARE AVAILABLE IN STELLAR AND ARTISAN GLAZES.
color palette
all pieces shown in bossy gray. variation in size, color, and shade to be expected.|6star-tribeca
sonoma t
ilemakers
2” X 8” SHORT EDGE BULLNOSE
2” X 8” LONG EDGE BULLNOSE
4” X 12” LONG EDGE BULLNOSE
4” X 12” SHORT EDGE BULLNOSE
3” X 9” SHORT EDGE BULLNOSE
3” X 9” LONG EDGE BULLNOSE
2” X 2” ANGLE
© 2
01
2 s
onoma t
ilemakers.
all r
ights r
eserved.
417 75%
www.sonomatilemakers.com
star-t
rib
eca
key usage & installation notes
These tiles are made with a semi-absorbent talc clay body and particular attention should be paid to: 1) installation of an absorbent clay body; 2) usage of matte glazes; 3) extra care required for crackles in wet areas
Star-TriBeCa mattes have a high resistance to abrasion, but may be prone to some surface staining
For crackles, always use a penetrating sealer during installation
See STM Tech Info at sonomatilemakers.com for more detailed info
HanDCRaFteD CHaRaCteRistiCs
Variation in shade, texture, color and size are inherent characteristics of handcrafted tile. Star-TriBeCa glazes are applied solely by hand and, as such, they are particularly subject to wide variation from tile to tile. As such, the tiles finally purchased will vary from both the catalog illustrations and samples. See Tech Info at sonomatilemakers.com for more information.
insPeCtion anD installation
Always inspect your tiles before they are installed, as installation of material constitutes acceptance. Any questions as to acceptability must be resolved before installation. We are in no way responsible for the installation of our tiles or thereafter. The responsibility for correct installation rests with the end user.
star-tribecasuggesteD aPPliCations
Walls
Light Duty Floors
Light Duty Countertops
We hand craft our tile in the California Wine Country. From the moment we remove the clay from the earth to the time it is installed as beautiful, sustainable tile – our practices respect the planet, our hometown, our employees and our clients. We are committed to eliminating waste from our production process, utilizing clean energy practices and protecting the environment.
Our clay is consciously excavated in the USA – we utilize every bit of it.
We produce over 150 colors and finishes comprised of natural minerals. Our glazes are 100% lead-free and non-toxic
We have over 180 solar panels on the roof of our factory building. We are the largest solar energy manufacturer in our hometown of Windsor, CA
We continually invest in state-of-the-art machinery to maximize energy efficiency
We utilize a sophisticated dust collection system throughout our factories for healthier air
We have partnered with CarbonFund.org to offset the carbon produced from shipping our product
Our shipping boxes are compliant with the Sustainable Forestry Initiative. They are made with a minimum of 70% post and pre-consumer recycled materials and are printed with soy-based inks
We recycle all paper, plastic, cardboard, styrofoam boxes and wooden pallets in every department
“Greener Every Day”
PHOTO: 4 X 4 SQUARE EDGE & ATHENA IN STAR WHITE, DUANE IN ROCKY, LORIEN IN GRANITE. DESIGNER: JASON BALL INTERIORS.
use this trim mark to accomodate for 3 hole punch
use this trim mark to accomodate for 3 hole punch
trim line
COVER PHOTO: 3 X 6 SABLE. DESIGNER: URRUTIA DESIGN
© 2
01
2 s
onoma t
ilemakers.
all r
ights r
eserved.
417 75%
www.sonomatilemakers.com
star-t
rib
eca
key usage & installation notes
These tiles are made with a semi-absorbent talc clay body and particular attention should be paid to: 1) installation of an absorbent clay body; 2) usage of matte glazes; 3) extra care required for crackles in wet areas
Star-TriBeCa mattes have a high resistance to abrasion, but may be prone to some surface staining
For crackles, always use a penetrating sealer during installation
See STM Tech Info at sonomatilemakers.com for more detailed info
HanDCRaFteD CHaRaCteRistiCs
Variation in shade, texture, color and size are inherent characteristics of handcrafted tile. Star-TriBeCa glazes are applied solely by hand and, as such, they are particularly subject to wide variation from tile to tile. As such, the tiles finally purchased will vary from both the catalog illustrations and samples. See Tech Info at sonomatilemakers.com for more information.
insPeCtion anD installation
Always inspect your tiles before they are installed, as installation of material constitutes acceptance. Any questions as to acceptability must be resolved before installation. We are in no way responsible for the installation of our tiles or thereafter. The responsibility for correct installation rests with the end user.
star-tribecasuggesteD aPPliCations
Walls
Light Duty Floors
Light Duty Countertops
We hand craft our tile in the California Wine Country. From the moment we remove the clay from the earth to the time it is installed as beautiful, sustainable tile – our practices respect the planet, our hometown, our employees and our clients. We are committed to eliminating waste from our production process, utilizing clean energy practices and protecting the environment.
Our clay is consciously excavated in the USA – we utilize every bit of it.
We produce over 150 colors and finishes comprised of natural minerals. Our glazes are 100% lead-free and non-toxic
We have over 180 solar panels on the roof of our factory building. We are the largest solar energy manufacturer in our hometown of Windsor, CA
We continually invest in state-of-the-art machinery to maximize energy efficiency
We utilize a sophisticated dust collection system throughout our factories for healthier air
We have partnered with CarbonFund.org to offset the carbon produced from shipping our product
Our shipping boxes are compliant with the Sustainable Forestry Initiative. They are made with a minimum of 70% post and pre-consumer recycled materials and are printed with soy-based inks
We recycle all paper, plastic, cardboard, styrofoam boxes and wooden pallets in every department
“Greener Every Day”
PHOTO: 4 X 4 SQUARE EDGE & ATHENA IN STAR WHITE, DUANE IN ROCKY, LORIEN IN GRANITE. DESIGNER: JASON BALL INTERIORS.
use this trim mark to accomodate for 3 hole punch
use this trim mark to accomodate for 3 hole punch
trim line
COVER PHOTO: 3 X 6 SABLE. DESIGNER: URRUTIA DESIGN
Related Documents
