www.amnitec.nl STAINLESS STEEL EXPANSION JOINT, TYPE ABS APPLICATIONS An expansion joint with steel welding ends for applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. The expansion joint will be delivered pre-stressed, which allows a maximum movement. TECHNICAL DESCRIPTION Bellow (1) : AISI 316Ti Welding ends (2) : Carbon Steel Outer sleeve (3) : AISI 304 Inner sleeve (4) : AISI 304 DATA TABLE DN Type NL Pre-stressed Length Axial Compression D d Max. Pressure Max. Pressure mm (in.) mm mm mm mm bar/20°C bar/100°C 15(1/2) ABS 151630 210 -30 32 21,3 16 10 20(3/4) ABS 201630 200 -30 38 26,9 16 10 25(1) ABS 251630 215 -30 45 33,7 16 10 32(1.1/4) ABS 321630 225 -30 52 42,8 16 10 40(1.1/2) ABS 401630 220 -30 63 48,3 16 10 50(2) ABS 501644 267 -44 76 60,3 16 10 65(2.1/2”) ABS 651644 247 -44 102 76,1 16 10 *NL = Pre-stressed Length. NL 2 3 4 1 d D All information in this document is without any obligation, specifications subject to change without any notice.
10
Embed
STAINLESS STEEL EXPANSION JOINT, TYPE ABS STAINLESS STEEL EXPANSION JOINT, TYPE ABS APPLICATIONS An expansion joint with steel welding ends for applications in mainly heating systems,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ABS
APPLICATIONS
An expansion joint with steel welding ends for applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. The expansion joint will be delivered pre-stressed, which allows a maximum movement.
TECHNICAL DESCRIPTION
Bellow (1) : AISI 316Ti
Welding ends (2) : Carbon Steel
Outer sleeve (3) : AISI 304
Inner sleeve (4) : AISI 304
DATA TABLE
DN Type
NL Pre-stressed Length
AxialCompression D d
Max.Pressure
Max.Pressure
mm (in.) mm mm mm mm bar/20°C bar/100°C
15(1/2) ABS 151630 210 -30 32 21,3 16 10
20(3/4) ABS 201630 200 -30 38 26,9 16 10
25(1) ABS 251630 215 -30 45 33,7 16 10
32(1.1/4) ABS 321630 225 -30 52 42,8 16 10
40(1.1/2) ABS 401630 220 -30 63 48,3 16 10
50(2) ABS 501644 267 -44 76 60,3 16 10
65(2.1/2”) ABS 651644 247 -44 102 76,1 16 10
*NL = Pre-stressed Length.
NL
23
4
1
d D
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ABFT
APPLICATIONS
An expansion joint with female thread socks which guarantee fast and smooth tightening. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. Due to its aesthehic appearance, this expansion joint is widely used in livingrooms, hotelchambers, offices etc. With the help of the limiting-pin, minimum and maximum limits and pretension are observed easily.
TECHNICAL DESCRIPTION
Bellow (1) : AISI 316Ti
Sockets (2) : Carbon Steel
Outer sleeve (3) : Carbon Steel
Inner sleeve (4) : AISI 304
Pin (5) : Carbon Steel
DATA TABLE
DN Type
NLNeutral Length
AxialCompression
AxialExtension D d
Max.Pressure
Max.Pressure
mm (in.) mm mm mm mm R bar/70°C bar/100°C
15(1/2) ABFT 151650 260 -13 +12 35 1/2” 16 10
20(3/4) ABFT 201650 260 -13 +12 42 3/4” 16 10
25(1) ABFT 251650 260 -13 +12 51 1” 16 10
32(1.1/4) ABFT 321650 260 -13 +12 60 1.1/4” 16 10
40(1.1/2) ABFT 401650 260 -13 +12 63 1.1/2” 16 10
50(2) ABFT 501650 260 -13 +12 70 2” 16 10
D
NL
2 314 5
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ABSM
APPLICATIONS
An expansion joint with stainless steel press fittings, e.g. Mapress, Xpress, Profipress, Bonfix etc., which guarantee very fast and smooth tightening. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. The expansion joint will be delivered pre-stressed, which allows a maximum movement.
TECHNICAL DESCRIPTION
Bellow (1) : AISI 316Ti
Welding ends (2) : Carbon Steel
Mapress fitting (3) : AISI 316 L
Outer sleeve (4) : AISI 304
Inner sleeve (5) : AISI 304
DATA TABLE
DN Type
NL Pre-stressed Length
AxialCompression D d
Max.Pressure
Max.Pressure
mm (in.) mm mm mm mm bar/20°C bar/100°C
15(1/2) ABSM 151630 280 -30 32 18 16 10
20(3/4) ABSM 201630 284 -30 38 22 16 10
25(1) ABSM 251630 306 -30 45 28 16 10
32(1.1/4) ABSM 321630 327 -30 52 35 16 10
40(1.1/2) ABSM 401630 340 -30 63 42 16 10
50(2) ABSM 501644 387 -44 76 54 16 10
*NL = Pre-stressed Length.
D d
5
1
NL
42 3
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ABFTM
APPLICATIONS
An expansion joint with female thread socks and prefab stainless steel press fittings, e.g. Mapress, Xpress, Profipress, Bonfix etc., which guarantee very fast and smooth tightening. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. Due to its aesthehic appearance, this expansion joint is widely used in livingrooms, hotelchambers, offices etc. With the help of the limiting-pin, minimum and maximum limits and pretension are observed easily.
TECHNICAL DESCRIPTION
Bellow (1) : AISI 316Ti
Sockets (2) : Carbon Steel
Outer sleeve (3) : Carbon Steel
Inner sleeve (4) : AISI 304
Pin (5) : Carbon Steel
Mapress-fitting (6) : AISI 316L
DATA TABLE
DN Type
NL Neutral Length
AxialCompression
AxialExtension D d
Max.Pressure
Max.Pressure
mm (in.) mm mm mm mm mm bar/70°C bar/100°C
15(1/2) ABFTM 151650 260 -13 +12 35 18 16 10
20(3/4) ABFTM 201650 260 -13 +12 42 22 16 10
25(1) ABFTM 251650 260 -13 +12 51 28 16 10
32(1.1/4) ABFTM 321650 260 -13 +12 60 35 16 10
40(1.1/2) ABFTM 401650 260 -13 +12 63 42 16 10
50(2) ABFTM 501650 260 -13 +12 70 54 16 10
Dd
NL "A"
TL=NL+2X ’’A’’
"A"2 314 5
6
All information in this document is without any obligation, specifications subject to change without any notice.
’’A’’: Is dependable of the brand Press fitting.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ANW
APPLICATIONS
An expansion joint with steel welding ends for applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint has to be welded into the piping system and it is basically meant for axial movements.
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, WITH FIXED FLANGES, TYPE ANF
APPLICATIONS
An expansion joint with steel welding ends with steel fixed flanges according to PN10/PN16 (see table) For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements. Flanges are mounted in line.
Fixed, PN 16(DN 200 up to DN 300-PN 10), carbon steel. Other flanges (ANSI) on request.
NL
2 4
13
DATA TABLE
DN Type
NLNeutral Length
AxialCompression
AxialExtension
Flangeconnection
Max.Pressure
Max.Pressure
mm (in.) mm mm mm mm bar/20°C bar/100°C
15(1/2) ANF 151620 160 -10 +10 PN 16 16 10
20(3/4) ANF 201622 161 -11 +11 PN 16 16 10
25(1) ANF 251626 162 -13 +13 PN 16 16 10
32(1.1/4) ANF 321626 196 -13 +13 PN 16 16 10
40(1.1/2) ANF 401636 212 -18 +18 PN 16 16 10
50(2) ANF 501646 234 -23 +23 PN 16 16 10
65(2.1/2) ANF 651648 246 -24 +24 PN 16 16 10
80(3) ANF 801640 215 -20 +20 PN 16 16 10
100(4) ANF 1001640 215 -20 +20 PN 16 16 10
125(5) ANF 1251650 220 -25 +25 PN 16 16 10
150(6) ANF 1501650 275 -25 +25 PN 16 16 10
200(8) ANF 2001650 286 -25 +25 PN 10 16 10
250(10) ANF 2501650 315 -25 +25 PN 10 16 10
300(12) ANF 3001650 345 -25 +25 PN 10 16 10
*For combined movements, consult AmniTec BV.
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT,WITH SWIVEL FLANGES, TYPE ANL
APPLICATIONS
An expansion joint with stainless steel collars with steel swivel flanges according to PN10/PN16 (see table) For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements and where a short overall length is required.
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ALG
APPLICATIONS
An expansion joint with steel grooved ends for use within grooved end pipe systems, e.g. Grinnell, Victaulic, etc. Using these couplings and fittings, combines a number of advantages. The ease and swiftness of installation reduces the actual time needed “on site”. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements. The shown type is recommended for mounting with Grinnell Rigid couplings.
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE ANS
APPLICATIONS
An expansion joint with steel grooved ends for use within grooved end pipe systems, e.g. Grinnell, Victaulic, etc. Using these couplings and fittings, combines a number of advantages. The ease and swiftness of installation reduces the actual time needed “on site”. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements. The shown type is recommended for mounting with Grinnell Rigid couplings.
125(5) ANS 125-16-50 210 -25 +25 139,7x6,3 155 16 10
150(6) ANS 150-16-50 245 -25 +25 168,3x8 184 16 10
200(8) ANS 200-16-50 275 -25 +25 219,1x8 235 16 10
*For combined movements, consult AmniTec BV.
NL
1
E D
2
All information in this document is without any obligation, specifications subject to change without any notice.
www.amnitec.nl
STAINLESS STEEL EXPANSION JOINT, TYPE RXAG
APPLICATIONS
An expansion joint with steel grooved ends for use within grooved end pipe systems, e.g. Grinnell, Victaulic, etc. Using these couplings and fittings, combines a number of advantages. The ease and swiftness of installation reduces the actual time needed “on site”. For applications in mainly heating systems, where a thermal expansion of the piping has to be absorbed. This type of expansion joint is basically meant for axial movements, and has an outer protection sleeve. The shown type is recommended for mounting with Grinnell Rigid couplings.